Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 197 insertions, 0 deletions

diff --git a/drivers/video/fbdev/via/accel.h b/drivers/video/fbdev/via/accel.h
new file mode 100644
index 000000000..564ed0291
--- /dev/null
+++ b/drivers/video/fbdev/via/accel.h
@@ -0,0 +1,197 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
+ * Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
+
+ */
+
+#ifndef __ACCEL_H__
+#define __ACCEL_H__
+
+#define FB_ACCEL_VIA_UNICHROME  50
+
+/* MMIO Base Address Definition */
+#define MMIO_VGABASE                0x8000
+#define MMIO_CR_READ                (MMIO_VGABASE + 0x3D4)
+#define MMIO_CR_WRITE               (MMIO_VGABASE + 0x3D5)
+#define MMIO_SR_READ                (MMIO_VGABASE + 0x3C4)
+#define MMIO_SR_WRITE               (MMIO_VGABASE + 0x3C5)
+
+/* HW Cursor Status Define */
+#define HW_Cursor_ON    0
+#define HW_Cursor_OFF   1
+
+#define CURSOR_SIZE     (8 * 1024)
+#define VQ_SIZE         (256 * 1024)
+
+#define VIA_MMIO_BLTBASE        0x200000
+#define VIA_MMIO_BLTSIZE        0x200000
+
+/* Defines for 2D registers */
+#define VIA_REG_GECMD           0x000
+#define VIA_REG_GEMODE          0x004
+#define VIA_REG_SRCPOS          0x008
+#define VIA_REG_DSTPOS          0x00C
+/* width and height */
+#define VIA_REG_DIMENSION       0x010
+#define VIA_REG_PATADDR         0x014
+#define VIA_REG_FGCOLOR         0x018
+#define VIA_REG_BGCOLOR         0x01C
+/* top and left of clipping */
+#define VIA_REG_CLIPTL          0x020
+/* bottom and right of clipping */
+#define VIA_REG_CLIPBR          0x024
+#define VIA_REG_OFFSET          0x028
+/* color key control */
+#define VIA_REG_KEYCONTROL      0x02C
+#define VIA_REG_SRCBASE         0x030
+#define VIA_REG_DSTBASE         0x034
+/* pitch of src and dst */
+#define VIA_REG_PITCH           0x038
+#define VIA_REG_MONOPAT0        0x03C
+#define VIA_REG_MONOPAT1        0x040
+/* from 0x100 to 0x1ff */
+#define VIA_REG_COLORPAT        0x100
+
+/* defines for VIA 2D registers for vt3353/3409 (M1 engine)*/
+#define VIA_REG_GECMD_M1        0x000
+#define VIA_REG_GEMODE_M1       0x004
+#define VIA_REG_GESTATUS_M1     0x004       /* as same as VIA_REG_GEMODE */
+#define VIA_REG_PITCH_M1        0x008       /* pitch of src and dst */
+#define VIA_REG_DIMENSION_M1    0x00C       /* width and height */
+#define VIA_REG_DSTPOS_M1       0x010
+#define VIA_REG_LINE_XY_M1      0x010
+#define VIA_REG_DSTBASE_M1      0x014
+#define VIA_REG_SRCPOS_M1       0x018
+#define VIA_REG_LINE_K1K2_M1    0x018
+#define VIA_REG_SRCBASE_M1      0x01C
+#define VIA_REG_PATADDR_M1      0x020
+#define VIA_REG_MONOPAT0_M1     0x024
+#define VIA_REG_MONOPAT1_M1     0x028
+#define VIA_REG_OFFSET_M1       0x02C
+#define VIA_REG_LINE_ERROR_M1   0x02C
+#define VIA_REG_CLIPTL_M1       0x040       /* top and left of clipping */
+#define VIA_REG_CLIPBR_M1       0x044       /* bottom and right of clipping */
+#define VIA_REG_KEYCONTROL_M1   0x048       /* color key control */
+#define VIA_REG_FGCOLOR_M1      0x04C
+#define VIA_REG_DSTCOLORKEY_M1  0x04C       /* as same as VIA_REG_FG */
+#define VIA_REG_BGCOLOR_M1      0x050
+#define VIA_REG_SRCCOLORKEY_M1  0x050       /* as same as VIA_REG_BG */
+#define VIA_REG_MONOPATFGC_M1   0x058       /* Add BG color of Pattern. */
+#define VIA_REG_MONOPATBGC_M1   0x05C       /* Add FG color of Pattern. */
+#define VIA_REG_COLORPAT_M1     0x100       /* from 0x100 to 0x1ff */
+
+/* VIA_REG_PITCH(0x38): Pitch Setting */
+#define VIA_PITCH_ENABLE        0x80000000
+
+/* defines for VIA HW cursor registers */
+#define VIA_REG_CURSOR_MODE     0x2D0
+#define VIA_REG_CURSOR_POS      0x2D4
+#define VIA_REG_CURSOR_ORG      0x2D8
+#define VIA_REG_CURSOR_BG       0x2DC
+#define VIA_REG_CURSOR_FG       0x2E0
+
+/* VIA_REG_GEMODE(0x04): GE mode */
+#define VIA_GEM_8bpp            0x00000000
+#define VIA_GEM_16bpp           0x00000100
+#define VIA_GEM_32bpp           0x00000300
+
+/* VIA_REG_GECMD(0x00): 2D Engine Command  */
+#define VIA_GEC_NOOP            0x00000000
+#define VIA_GEC_BLT             0x00000001
+#define VIA_GEC_LINE            0x00000005
+
+/* Rotate Command */
+#define VIA_GEC_ROT             0x00000008
+
+#define VIA_GEC_SRC_XY          0x00000000
+#define VIA_GEC_SRC_LINEAR      0x00000010
+#define VIA_GEC_DST_XY          0x00000000
+#define VIA_GEC_DST_LINRAT      0x00000020
+
+#define VIA_GEC_SRC_FB          0x00000000
+#define VIA_GEC_SRC_SYS         0x00000040
+#define VIA_GEC_DST_FB          0x00000000
+#define VIA_GEC_DST_SYS         0x00000080
+
+/* source is mono */
+#define VIA_GEC_SRC_MONO        0x00000100
+/* pattern is mono */
+#define VIA_GEC_PAT_MONO        0x00000200
+/* mono src is opaque */
+#define VIA_GEC_MSRC_OPAQUE     0x00000000
+/* mono src is transparent */
+#define VIA_GEC_MSRC_TRANS      0x00000400
+/* pattern is in frame buffer */
+#define VIA_GEC_PAT_FB          0x00000000
+/* pattern is from reg setting */
+#define VIA_GEC_PAT_REG         0x00000800
+
+#define VIA_GEC_CLIP_DISABLE    0x00000000
+#define VIA_GEC_CLIP_ENABLE     0x00001000
+
+#define VIA_GEC_FIXCOLOR_PAT    0x00002000
+
+#define VIA_GEC_INCX            0x00000000
+#define VIA_GEC_DECY            0x00004000
+#define VIA_GEC_INCY            0x00000000
+#define VIA_GEC_DECX            0x00008000
+/* mono pattern is opaque */
+#define VIA_GEC_MPAT_OPAQUE     0x00000000
+/* mono pattern is transparent */
+#define VIA_GEC_MPAT_TRANS      0x00010000
+
+#define VIA_GEC_MONO_UNPACK     0x00000000
+#define VIA_GEC_MONO_PACK       0x00020000
+#define VIA_GEC_MONO_DWORD      0x00000000
+#define VIA_GEC_MONO_WORD       0x00040000
+#define VIA_GEC_MONO_BYTE       0x00080000
+
+#define VIA_GEC_LASTPIXEL_ON    0x00000000
+#define VIA_GEC_LASTPIXEL_OFF   0x00100000
+#define VIA_GEC_X_MAJOR         0x00000000
+#define VIA_GEC_Y_MAJOR         0x00200000
+#define VIA_GEC_QUICK_START     0x00800000
+
+/* defines for VIA 3D registers */
+#define VIA_REG_STATUS          0x400
+#define VIA_REG_CR_TRANSET      0x41C
+#define VIA_REG_CR_TRANSPACE	0x420
+#define VIA_REG_TRANSET         0x43C
+#define VIA_REG_TRANSPACE       0x440
+
+/* VIA_REG_STATUS(0x400): Engine Status */
+
+/* Command Regulator is busy */
+#define VIA_CMD_RGTR_BUSY       0x00000080
+/* 2D Engine is busy */
+#define VIA_2D_ENG_BUSY         0x00000002
+/* 3D Engine is busy */
+#define VIA_3D_ENG_BUSY         0x00000001
+/* Virtual Queue is busy */
+#define VIA_VR_QUEUE_BUSY       0x00020000
+
+/* VIA_REG_STATUS(0x400): Engine Status for H5 */
+#define VIA_CMD_RGTR_BUSY_H5   0x00000010  /* Command Regulator is busy */
+#define VIA_2D_ENG_BUSY_H5     0x00000002  /* 2D Engine is busy */
+#define VIA_3D_ENG_BUSY_H5     0x00001FE1  /* 3D Engine is busy */
+#define VIA_VR_QUEUE_BUSY_H5   0x00000004  /* Virtual Queue is busy */
+
+/* VIA_REG_STATUS(0x400): Engine Status for VT3353/3409 */
+#define VIA_CMD_RGTR_BUSY_M1   0x00000010  /* Command Regulator is busy */
+#define VIA_2D_ENG_BUSY_M1     0x00000002  /* 2D Engine is busy */
+#define VIA_3D_ENG_BUSY_M1     0x00001FE1  /* 3D Engine is busy */
+#define VIA_VR_QUEUE_BUSY_M1   0x00000004  /* Virtual Queue is busy */
+
+#define MAXLOOP                 0xFFFFFF
+
+#define VIA_BITBLT_COLOR	1
+#define VIA_BITBLT_MONO		2
+#define VIA_BITBLT_FILL		3
+
+int viafb_setup_engine(struct fb_info *info);
+void viafb_reset_engine(struct viafb_par *viapar);
+void viafb_show_hw_cursor(struct fb_info *info, int Status);
+void viafb_wait_engine_idle(struct fb_info *info);
+
+#endif /* __ACCEL_H__ */