Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1168 insertions, 0 deletions

diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
new file mode 100644
index 000000000..44103f948
--- /dev/null
+++ b/include/asm-generic/vmlinux.lds.h
@@ -0,0 +1,1168 @@
+/*
+ * Helper macros to support writing architecture specific
+ * linker scripts.
+ *
+ * A minimal linker scripts has following content:
+ * [This is a sample, architectures may have special requiriements]
+ *
+ * OUTPUT_FORMAT(...)
+ * OUTPUT_ARCH(...)
+ * ENTRY(...)
+ * SECTIONS
+ * {
+ *	. = START;
+ *	__init_begin = .;
+ *	HEAD_TEXT_SECTION
+ *	INIT_TEXT_SECTION(PAGE_SIZE)
+ *	INIT_DATA_SECTION(...)
+ *	PERCPU_SECTION(CACHELINE_SIZE)
+ *	__init_end = .;
+ *
+ *	_stext = .;
+ *	TEXT_SECTION = 0
+ *	_etext = .;
+ *
+ *      _sdata = .;
+ *	RO_DATA(PAGE_SIZE)
+ *	RW_DATA(...)
+ *	_edata = .;
+ *
+ *	EXCEPTION_TABLE(...)
+ *
+ *	BSS_SECTION(0, 0, 0)
+ *	_end = .;
+ *
+ *	STABS_DEBUG
+ *	DWARF_DEBUG
+ *	ELF_DETAILS
+ *
+ *	DISCARDS		// must be the last
+ * }
+ *
+ * [__init_begin, __init_end] is the init section that may be freed after init
+ * 	// __init_begin and __init_end should be page aligned, so that we can
+ *	// free the whole .init memory
+ * [_stext, _etext] is the text section
+ * [_sdata, _edata] is the data section
+ *
+ * Some of the included output section have their own set of constants.
+ * Examples are: [__initramfs_start, __initramfs_end] for initramfs and
+ *               [__nosave_begin, __nosave_end] for the nosave data
+ */
+
+#ifndef LOAD_OFFSET
+#define LOAD_OFFSET 0
+#endif
+
+/*
+ * Only some architectures want to have the .notes segment visible in
+ * a separate PT_NOTE ELF Program Header. When this happens, it needs
+ * to be visible in both the kernel text's PT_LOAD and the PT_NOTE
+ * Program Headers. In this case, though, the PT_LOAD needs to be made
+ * the default again so that all the following sections don't also end
+ * up in the PT_NOTE Program Header.
+ */
+#ifdef EMITS_PT_NOTE
+#define NOTES_HEADERS		:text :note
+#define NOTES_HEADERS_RESTORE	__restore_ph : { *(.__restore_ph) } :text
+#else
+#define NOTES_HEADERS
+#define NOTES_HEADERS_RESTORE
+#endif
+
+/*
+ * Some architectures have non-executable read-only exception tables.
+ * They can be added to the RO_DATA segment by specifying their desired
+ * alignment.
+ */
+#ifdef RO_EXCEPTION_TABLE_ALIGN
+#define RO_EXCEPTION_TABLE	EXCEPTION_TABLE(RO_EXCEPTION_TABLE_ALIGN)
+#else
+#define RO_EXCEPTION_TABLE
+#endif
+
+/* Align . to a 8 byte boundary equals to maximum function alignment. */
+#define ALIGN_FUNCTION()  . = ALIGN(8)
+
+/*
+ * LD_DEAD_CODE_DATA_ELIMINATION option enables -fdata-sections, which
+ * generates .data.identifier sections, which need to be pulled in with
+ * .data. We don't want to pull in .data..other sections, which Linux
+ * has defined. Same for text and bss.
+ *
+ * RODATA_MAIN is not used because existing code already defines .rodata.x
+ * sections to be brought in with rodata.
+ */
+#ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
+#define TEXT_MAIN .text .text.[0-9a-zA-Z_]*
+#define DATA_MAIN .data .data.[0-9a-zA-Z_]* .data..LPBX*
+#define SDATA_MAIN .sdata .sdata.[0-9a-zA-Z_]*
+#define RODATA_MAIN .rodata .rodata.[0-9a-zA-Z_]*
+#define BSS_MAIN .bss .bss.[0-9a-zA-Z_]*
+#define SBSS_MAIN .sbss .sbss.[0-9a-zA-Z_]*
+#else
+#define TEXT_MAIN .text
+#define DATA_MAIN .data
+#define SDATA_MAIN .sdata
+#define RODATA_MAIN .rodata
+#define BSS_MAIN .bss
+#define SBSS_MAIN .sbss
+#endif
+
+/*
+ * GCC 4.5 and later have a 32 bytes section alignment for structures.
+ * Except GCC 4.9, that feels the need to align on 64 bytes.
+ */
+#if __GNUC__ == 4 && __GNUC_MINOR__ == 9
+#define STRUCT_ALIGNMENT 64
+#else
+#define STRUCT_ALIGNMENT 32
+#endif
+#define STRUCT_ALIGN() . = ALIGN(STRUCT_ALIGNMENT)
+
+/*
+ * The order of the sched class addresses are important, as they are
+ * used to determine the order of the priority of each sched class in
+ * relation to each other.
+ */
+#define SCHED_DATA				\
+	STRUCT_ALIGN();				\
+	__begin_sched_classes = .;		\
+	*(__idle_sched_class)			\
+	*(__fair_sched_class)			\
+	*(__rt_sched_class)			\
+	*(__dl_sched_class)			\
+	*(__stop_sched_class)			\
+	__end_sched_classes = .;
+
+/* The actual configuration determine if the init/exit sections
+ * are handled as text/data or they can be discarded (which
+ * often happens at runtime)
+ */
+#ifdef CONFIG_HOTPLUG_CPU
+#define CPU_KEEP(sec)    *(.cpu##sec)
+#define CPU_DISCARD(sec)
+#else
+#define CPU_KEEP(sec)
+#define CPU_DISCARD(sec) *(.cpu##sec)
+#endif
+
+#if defined(CONFIG_MEMORY_HOTPLUG)
+#define MEM_KEEP(sec)    *(.mem##sec)
+#define MEM_DISCARD(sec)
+#else
+#define MEM_KEEP(sec)
+#define MEM_DISCARD(sec) *(.mem##sec)
+#endif
+
+#ifdef CONFIG_FTRACE_MCOUNT_RECORD
+/*
+ * The ftrace call sites are logged to a section whose name depends on the
+ * compiler option used. A given kernel image will only use one, AKA
+ * FTRACE_CALLSITE_SECTION. We capture all of them here to avoid header
+ * dependencies for FTRACE_CALLSITE_SECTION's definition.
+ *
+ * Need to also make ftrace_stub_graph point to ftrace_stub
+ * so that the same stub location may have different protocols
+ * and not mess up with C verifiers.
+ */
+#define MCOUNT_REC()	. = ALIGN(8);				\
+			__start_mcount_loc = .;			\
+			KEEP(*(__mcount_loc))			\
+			KEEP(*(__patchable_function_entries))	\
+			__stop_mcount_loc = .;			\
+			ftrace_stub_graph = ftrace_stub;
+#else
+# ifdef CONFIG_FUNCTION_TRACER
+#  define MCOUNT_REC()	ftrace_stub_graph = ftrace_stub;
+# else
+#  define MCOUNT_REC()
+# endif
+#endif
+
+#ifdef CONFIG_TRACE_BRANCH_PROFILING
+#define LIKELY_PROFILE()	__start_annotated_branch_profile = .;	\
+				KEEP(*(_ftrace_annotated_branch))	\
+				__stop_annotated_branch_profile = .;
+#else
+#define LIKELY_PROFILE()
+#endif
+
+#ifdef CONFIG_PROFILE_ALL_BRANCHES
+#define BRANCH_PROFILE()	__start_branch_profile = .;		\
+				KEEP(*(_ftrace_branch))			\
+				__stop_branch_profile = .;
+#else
+#define BRANCH_PROFILE()
+#endif
+
+#ifdef CONFIG_KPROBES
+#define KPROBE_BLACKLIST()	. = ALIGN(8);				      \
+				__start_kprobe_blacklist = .;		      \
+				KEEP(*(_kprobe_blacklist))		      \
+				__stop_kprobe_blacklist = .;
+#else
+#define KPROBE_BLACKLIST()
+#endif
+
+#ifdef CONFIG_FUNCTION_ERROR_INJECTION
+#define ERROR_INJECT_WHITELIST()	STRUCT_ALIGN();			      \
+			__start_error_injection_whitelist = .;		      \
+			KEEP(*(_error_injection_whitelist))		      \
+			__stop_error_injection_whitelist = .;
+#else
+#define ERROR_INJECT_WHITELIST()
+#endif
+
+#ifdef CONFIG_EVENT_TRACING
+#define FTRACE_EVENTS()	. = ALIGN(8);					\
+			__start_ftrace_events = .;			\
+			KEEP(*(_ftrace_events))				\
+			__stop_ftrace_events = .;			\
+			__start_ftrace_eval_maps = .;			\
+			KEEP(*(_ftrace_eval_map))			\
+			__stop_ftrace_eval_maps = .;
+#else
+#define FTRACE_EVENTS()
+#endif
+
+#ifdef CONFIG_TRACING
+#define TRACE_PRINTKS()	 __start___trace_bprintk_fmt = .;      \
+			 KEEP(*(__trace_printk_fmt)) /* Trace_printk fmt' pointer */ \
+			 __stop___trace_bprintk_fmt = .;
+#define TRACEPOINT_STR() __start___tracepoint_str = .;	\
+			 KEEP(*(__tracepoint_str)) /* Trace_printk fmt' pointer */ \
+			 __stop___tracepoint_str = .;
+#else
+#define TRACE_PRINTKS()
+#define TRACEPOINT_STR()
+#endif
+
+#ifdef CONFIG_FTRACE_SYSCALLS
+#define TRACE_SYSCALLS() . = ALIGN(8);					\
+			 __start_syscalls_metadata = .;			\
+			 KEEP(*(__syscalls_metadata))			\
+			 __stop_syscalls_metadata = .;
+#else
+#define TRACE_SYSCALLS()
+#endif
+
+#ifdef CONFIG_BPF_EVENTS
+#define BPF_RAW_TP() STRUCT_ALIGN();					\
+			 __start__bpf_raw_tp = .;			\
+			 KEEP(*(__bpf_raw_tp_map))			\
+			 __stop__bpf_raw_tp = .;
+#else
+#define BPF_RAW_TP()
+#endif
+
+#ifdef CONFIG_SERIAL_EARLYCON
+#define EARLYCON_TABLE() . = ALIGN(8);				\
+			 __earlycon_table = .;			\
+			 KEEP(*(__earlycon_table))		\
+			 __earlycon_table_end = .;
+#else
+#define EARLYCON_TABLE()
+#endif
+
+#ifdef CONFIG_SECURITY
+#define LSM_TABLE()	. = ALIGN(8);					\
+			__start_lsm_info = .;				\
+			KEEP(*(.lsm_info.init))				\
+			__end_lsm_info = .;
+#define EARLY_LSM_TABLE()	. = ALIGN(8);				\
+			__start_early_lsm_info = .;			\
+			KEEP(*(.early_lsm_info.init))			\
+			__end_early_lsm_info = .;
+#else
+#define LSM_TABLE()
+#define EARLY_LSM_TABLE()
+#endif
+
+#define ___OF_TABLE(cfg, name)	_OF_TABLE_##cfg(name)
+#define __OF_TABLE(cfg, name)	___OF_TABLE(cfg, name)
+#define OF_TABLE(cfg, name)	__OF_TABLE(IS_ENABLED(cfg), name)
+#define _OF_TABLE_0(name)
+#define _OF_TABLE_1(name)						\
+	. = ALIGN(8);							\
+	__##name##_of_table = .;					\
+	KEEP(*(__##name##_of_table))					\
+	KEEP(*(__##name##_of_table_end))
+
+#define TIMER_OF_TABLES()	OF_TABLE(CONFIG_TIMER_OF, timer)
+#define IRQCHIP_OF_MATCH_TABLE() OF_TABLE(CONFIG_IRQCHIP, irqchip)
+#define CLK_OF_TABLES()		OF_TABLE(CONFIG_COMMON_CLK, clk)
+#define RESERVEDMEM_OF_TABLES()	OF_TABLE(CONFIG_OF_RESERVED_MEM, reservedmem)
+#define CPU_METHOD_OF_TABLES()	OF_TABLE(CONFIG_SMP, cpu_method)
+#define CPUIDLE_METHOD_OF_TABLES() OF_TABLE(CONFIG_CPU_IDLE, cpuidle_method)
+
+#ifdef CONFIG_ACPI
+#define ACPI_PROBE_TABLE(name)						\
+	. = ALIGN(8);							\
+	__##name##_acpi_probe_table = .;				\
+	KEEP(*(__##name##_acpi_probe_table))				\
+	__##name##_acpi_probe_table_end = .;
+#else
+#define ACPI_PROBE_TABLE(name)
+#endif
+
+#ifdef CONFIG_THERMAL
+#define THERMAL_TABLE(name)						\
+	. = ALIGN(8);							\
+	__##name##_thermal_table = .;					\
+	KEEP(*(__##name##_thermal_table))				\
+	__##name##_thermal_table_end = .;
+#else
+#define THERMAL_TABLE(name)
+#endif
+
+#define KERNEL_DTB()							\
+	STRUCT_ALIGN();							\
+	__dtb_start = .;						\
+	KEEP(*(.dtb.init.rodata))					\
+	__dtb_end = .;
+
+/*
+ * .data section
+ */
+#define DATA_DATA							\
+	*(.xiptext)							\
+	*(DATA_MAIN)							\
+	*(.data..decrypted)						\
+	*(.ref.data)							\
+	*(.data..shared_aligned) /* percpu related */			\
+	MEM_KEEP(init.data*)						\
+	MEM_KEEP(exit.data*)						\
+	*(.data.unlikely)						\
+	__start_once = .;						\
+	*(.data.once)							\
+	__end_once = .;							\
+	STRUCT_ALIGN();							\
+	*(__tracepoints)						\
+	/* implement dynamic printk debug */				\
+	. = ALIGN(8);							\
+	__start___dyndbg = .;						\
+	KEEP(*(__dyndbg))						\
+	__stop___dyndbg = .;						\
+	LIKELY_PROFILE()		       				\
+	BRANCH_PROFILE()						\
+	TRACE_PRINTKS()							\
+	BPF_RAW_TP()							\
+	TRACEPOINT_STR()
+
+/*
+ * Data section helpers
+ */
+#define NOSAVE_DATA							\
+	. = ALIGN(PAGE_SIZE);						\
+	__nosave_begin = .;						\
+	*(.data..nosave)						\
+	. = ALIGN(PAGE_SIZE);						\
+	__nosave_end = .;
+
+#define PAGE_ALIGNED_DATA(page_align)					\
+	. = ALIGN(page_align);						\
+	*(.data..page_aligned)						\
+	. = ALIGN(page_align);
+
+#define READ_MOSTLY_DATA(align)						\
+	. = ALIGN(align);						\
+	*(.data..read_mostly)						\
+	. = ALIGN(align);
+
+#define CACHELINE_ALIGNED_DATA(align)					\
+	. = ALIGN(align);						\
+	*(.data..cacheline_aligned)
+
+#define INIT_TASK_DATA(align)						\
+	. = ALIGN(align);						\
+	__start_init_task = .;						\
+	init_thread_union = .;						\
+	init_stack = .;							\
+	KEEP(*(.data..init_task))					\
+	KEEP(*(.data..init_thread_info))				\
+	. = __start_init_task + THREAD_SIZE;				\
+	__end_init_task = .;
+
+#define JUMP_TABLE_DATA							\
+	. = ALIGN(8);							\
+	__start___jump_table = .;					\
+	KEEP(*(__jump_table))						\
+	__stop___jump_table = .;
+
+#define STATIC_CALL_DATA						\
+	. = ALIGN(8);							\
+	__start_static_call_sites = .;					\
+	KEEP(*(.static_call_sites))					\
+	__stop_static_call_sites = .;					\
+	__start_static_call_tramp_key = .;				\
+	KEEP(*(.static_call_tramp_key))					\
+	__stop_static_call_tramp_key = .;
+
+/*
+ * Allow architectures to handle ro_after_init data on their
+ * own by defining an empty RO_AFTER_INIT_DATA.
+ */
+#ifndef RO_AFTER_INIT_DATA
+#define RO_AFTER_INIT_DATA						\
+	. = ALIGN(8);							\
+	__start_ro_after_init = .;					\
+	*(.data..ro_after_init)						\
+	JUMP_TABLE_DATA							\
+	STATIC_CALL_DATA						\
+	__end_ro_after_init = .;
+#endif
+
+/*
+ * Read only Data
+ */
+#define RO_DATA(align)							\
+	. = ALIGN((align));						\
+	.rodata           : AT(ADDR(.rodata) - LOAD_OFFSET) {		\
+		__start_rodata = .;					\
+		*(.rodata) *(.rodata.*)					\
+		SCHED_DATA						\
+		RO_AFTER_INIT_DATA	/* Read only after init */	\
+		. = ALIGN(8);						\
+		__start___tracepoints_ptrs = .;				\
+		KEEP(*(__tracepoints_ptrs)) /* Tracepoints: pointer array */ \
+		__stop___tracepoints_ptrs = .;				\
+		*(__tracepoints_strings)/* Tracepoints: strings */	\
+	}								\
+									\
+	.rodata1          : AT(ADDR(.rodata1) - LOAD_OFFSET) {		\
+		*(.rodata1)						\
+	}								\
+									\
+	/* PCI quirks */						\
+	.pci_fixup        : AT(ADDR(.pci_fixup) - LOAD_OFFSET) {	\
+		__start_pci_fixups_early = .;				\
+		KEEP(*(.pci_fixup_early))				\
+		__end_pci_fixups_early = .;				\
+		__start_pci_fixups_header = .;				\
+		KEEP(*(.pci_fixup_header))				\
+		__end_pci_fixups_header = .;				\
+		__start_pci_fixups_final = .;				\
+		KEEP(*(.pci_fixup_final))				\
+		__end_pci_fixups_final = .;				\
+		__start_pci_fixups_enable = .;				\
+		KEEP(*(.pci_fixup_enable))				\
+		__end_pci_fixups_enable = .;				\
+		__start_pci_fixups_resume = .;				\
+		KEEP(*(.pci_fixup_resume))				\
+		__end_pci_fixups_resume = .;				\
+		__start_pci_fixups_resume_early = .;			\
+		KEEP(*(.pci_fixup_resume_early))			\
+		__end_pci_fixups_resume_early = .;			\
+		__start_pci_fixups_suspend = .;				\
+		KEEP(*(.pci_fixup_suspend))				\
+		__end_pci_fixups_suspend = .;				\
+		__start_pci_fixups_suspend_late = .;			\
+		KEEP(*(.pci_fixup_suspend_late))			\
+		__end_pci_fixups_suspend_late = .;			\
+	}								\
+									\
+	/* Built-in firmware blobs */					\
+	.builtin_fw : AT(ADDR(.builtin_fw) - LOAD_OFFSET) ALIGN(8) {	\
+		__start_builtin_fw = .;					\
+		KEEP(*(.builtin_fw))					\
+		__end_builtin_fw = .;					\
+	}								\
+									\
+	TRACEDATA							\
+									\
+	/* Kernel symbol table: Normal symbols */			\
+	__ksymtab         : AT(ADDR(__ksymtab) - LOAD_OFFSET) {		\
+		__start___ksymtab = .;					\
+		KEEP(*(SORT(___ksymtab+*)))				\
+		__stop___ksymtab = .;					\
+	}								\
+									\
+	/* Kernel symbol table: GPL-only symbols */			\
+	__ksymtab_gpl     : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) {	\
+		__start___ksymtab_gpl = .;				\
+		KEEP(*(SORT(___ksymtab_gpl+*)))				\
+		__stop___ksymtab_gpl = .;				\
+	}								\
+									\
+	/* Kernel symbol table: Normal unused symbols */		\
+	__ksymtab_unused  : AT(ADDR(__ksymtab_unused) - LOAD_OFFSET) {	\
+		__start___ksymtab_unused = .;				\
+		KEEP(*(SORT(___ksymtab_unused+*)))			\
+		__stop___ksymtab_unused = .;				\
+	}								\
+									\
+	/* Kernel symbol table: GPL-only unused symbols */		\
+	__ksymtab_unused_gpl : AT(ADDR(__ksymtab_unused_gpl) - LOAD_OFFSET) { \
+		__start___ksymtab_unused_gpl = .;			\
+		KEEP(*(SORT(___ksymtab_unused_gpl+*)))			\
+		__stop___ksymtab_unused_gpl = .;			\
+	}								\
+									\
+	/* Kernel symbol table: GPL-future-only symbols */		\
+	__ksymtab_gpl_future : AT(ADDR(__ksymtab_gpl_future) - LOAD_OFFSET) { \
+		__start___ksymtab_gpl_future = .;			\
+		KEEP(*(SORT(___ksymtab_gpl_future+*)))			\
+		__stop___ksymtab_gpl_future = .;			\
+	}								\
+									\
+	/* Kernel symbol table: Normal symbols */			\
+	__kcrctab         : AT(ADDR(__kcrctab) - LOAD_OFFSET) {		\
+		__start___kcrctab = .;					\
+		KEEP(*(SORT(___kcrctab+*)))				\
+		__stop___kcrctab = .;					\
+	}								\
+									\
+	/* Kernel symbol table: GPL-only symbols */			\
+	__kcrctab_gpl     : AT(ADDR(__kcrctab_gpl) - LOAD_OFFSET) {	\
+		__start___kcrctab_gpl = .;				\
+		KEEP(*(SORT(___kcrctab_gpl+*)))				\
+		__stop___kcrctab_gpl = .;				\
+	}								\
+									\
+	/* Kernel symbol table: Normal unused symbols */		\
+	__kcrctab_unused  : AT(ADDR(__kcrctab_unused) - LOAD_OFFSET) {	\
+		__start___kcrctab_unused = .;				\
+		KEEP(*(SORT(___kcrctab_unused+*)))			\
+		__stop___kcrctab_unused = .;				\
+	}								\
+									\
+	/* Kernel symbol table: GPL-only unused symbols */		\
+	__kcrctab_unused_gpl : AT(ADDR(__kcrctab_unused_gpl) - LOAD_OFFSET) { \
+		__start___kcrctab_unused_gpl = .;			\
+		KEEP(*(SORT(___kcrctab_unused_gpl+*)))			\
+		__stop___kcrctab_unused_gpl = .;			\
+	}								\
+									\
+	/* Kernel symbol table: GPL-future-only symbols */		\
+	__kcrctab_gpl_future : AT(ADDR(__kcrctab_gpl_future) - LOAD_OFFSET) { \
+		__start___kcrctab_gpl_future = .;			\
+		KEEP(*(SORT(___kcrctab_gpl_future+*)))			\
+		__stop___kcrctab_gpl_future = .;			\
+	}								\
+									\
+	/* Kernel symbol table: strings */				\
+        __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) {	\
+		*(__ksymtab_strings)					\
+	}								\
+									\
+	/* __*init sections */						\
+	__init_rodata : AT(ADDR(__init_rodata) - LOAD_OFFSET) {		\
+		*(.ref.rodata)						\
+		MEM_KEEP(init.rodata)					\
+		MEM_KEEP(exit.rodata)					\
+	}								\
+									\
+	/* Built-in module parameters. */				\
+	__param : AT(ADDR(__param) - LOAD_OFFSET) {			\
+		__start___param = .;					\
+		KEEP(*(__param))					\
+		__stop___param = .;					\
+	}								\
+									\
+	/* Built-in module versions. */					\
+	__modver : AT(ADDR(__modver) - LOAD_OFFSET) {			\
+		__start___modver = .;					\
+		KEEP(*(__modver))					\
+		__stop___modver = .;					\
+	}								\
+									\
+	RO_EXCEPTION_TABLE						\
+	NOTES								\
+	BTF								\
+									\
+	. = ALIGN((align));						\
+	__end_rodata = .;
+
+/*
+ * Non-instrumentable text section
+ */
+#define NOINSTR_TEXT							\
+		ALIGN_FUNCTION();					\
+		__noinstr_text_start = .;				\
+		*(.noinstr.text)					\
+		__noinstr_text_end = .;
+
+/*
+ * .text section. Map to function alignment to avoid address changes
+ * during second ld run in second ld pass when generating System.map
+ *
+ * TEXT_MAIN here will match .text.fixup and .text.unlikely if dead
+ * code elimination is enabled, so these sections should be converted
+ * to use ".." first.
+ */
+#define TEXT_TEXT							\
+		ALIGN_FUNCTION();					\
+		*(.text.hot .text.hot.*)				\
+		*(TEXT_MAIN .text.fixup)				\
+		*(.text.unlikely .text.unlikely.*)			\
+		*(.text.unknown .text.unknown.*)			\
+		NOINSTR_TEXT						\
+		*(.text..refcount)					\
+		*(.ref.text)						\
+		*(.text.asan.* .text.tsan.*)				\
+	MEM_KEEP(init.text*)						\
+	MEM_KEEP(exit.text*)						\
+
+
+/* sched.text is aling to function alignment to secure we have same
+ * address even at second ld pass when generating System.map */
+#define SCHED_TEXT							\
+		ALIGN_FUNCTION();					\
+		__sched_text_start = .;					\
+		*(.sched.text)						\
+		__sched_text_end = .;
+
+/* spinlock.text is aling to function alignment to secure we have same
+ * address even at second ld pass when generating System.map */
+#define LOCK_TEXT							\
+		ALIGN_FUNCTION();					\
+		__lock_text_start = .;					\
+		*(.spinlock.text)					\
+		__lock_text_end = .;
+
+#define CPUIDLE_TEXT							\
+		ALIGN_FUNCTION();					\
+		__cpuidle_text_start = .;				\
+		*(.cpuidle.text)					\
+		__cpuidle_text_end = .;
+
+#define KPROBES_TEXT							\
+		ALIGN_FUNCTION();					\
+		__kprobes_text_start = .;				\
+		*(.kprobes.text)					\
+		__kprobes_text_end = .;
+
+#define ENTRY_TEXT							\
+		ALIGN_FUNCTION();					\
+		__entry_text_start = .;					\
+		*(.entry.text)						\
+		__entry_text_end = .;
+
+#define IRQENTRY_TEXT							\
+		ALIGN_FUNCTION();					\
+		__irqentry_text_start = .;				\
+		*(.irqentry.text)					\
+		__irqentry_text_end = .;
+
+#define SOFTIRQENTRY_TEXT						\
+		ALIGN_FUNCTION();					\
+		__softirqentry_text_start = .;				\
+		*(.softirqentry.text)					\
+		__softirqentry_text_end = .;
+
+#define STATIC_CALL_TEXT						\
+		ALIGN_FUNCTION();					\
+		__static_call_text_start = .;				\
+		*(.static_call.text)					\
+		__static_call_text_end = .;
+
+/* Section used for early init (in .S files) */
+#define HEAD_TEXT  KEEP(*(.head.text))
+
+#define HEAD_TEXT_SECTION							\
+	.head.text : AT(ADDR(.head.text) - LOAD_OFFSET) {		\
+		HEAD_TEXT						\
+	}
+
+/*
+ * Exception table
+ */
+#define EXCEPTION_TABLE(align)						\
+	. = ALIGN(align);						\
+	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {		\
+		__start___ex_table = .;					\
+		KEEP(*(__ex_table))					\
+		__stop___ex_table = .;					\
+	}
+
+/*
+ * .BTF
+ */
+#ifdef CONFIG_DEBUG_INFO_BTF
+#define BTF								\
+	.BTF : AT(ADDR(.BTF) - LOAD_OFFSET) {				\
+		__start_BTF = .;					\
+		KEEP(*(.BTF))						\
+		__stop_BTF = .;						\
+	}								\
+	. = ALIGN(4);							\
+	.BTF_ids : AT(ADDR(.BTF_ids) - LOAD_OFFSET) {			\
+		*(.BTF_ids)						\
+	}
+#else
+#define BTF
+#endif
+
+/*
+ * Init task
+ */
+#define INIT_TASK_DATA_SECTION(align)					\
+	. = ALIGN(align);						\
+	.data..init_task :  AT(ADDR(.data..init_task) - LOAD_OFFSET) {	\
+		INIT_TASK_DATA(align)					\
+	}
+
+#ifdef CONFIG_CONSTRUCTORS
+#define KERNEL_CTORS()	. = ALIGN(8);			   \
+			__ctors_start = .;		   \
+			KEEP(*(SORT(.ctors.*)))		   \
+			KEEP(*(.ctors))			   \
+			KEEP(*(SORT(.init_array.*)))	   \
+			KEEP(*(.init_array))		   \
+			__ctors_end = .;
+#else
+#define KERNEL_CTORS()
+#endif
+
+/* init and exit section handling */
+#define INIT_DATA							\
+	KEEP(*(SORT(___kentry+*)))					\
+	*(.init.data init.data.*)					\
+	MEM_DISCARD(init.data*)						\
+	KERNEL_CTORS()							\
+	MCOUNT_REC()							\
+	*(.init.rodata .init.rodata.*)					\
+	FTRACE_EVENTS()							\
+	TRACE_SYSCALLS()						\
+	KPROBE_BLACKLIST()						\
+	ERROR_INJECT_WHITELIST()					\
+	MEM_DISCARD(init.rodata)					\
+	CLK_OF_TABLES()							\
+	RESERVEDMEM_OF_TABLES()						\
+	TIMER_OF_TABLES()						\
+	CPU_METHOD_OF_TABLES()						\
+	CPUIDLE_METHOD_OF_TABLES()					\
+	KERNEL_DTB()							\
+	IRQCHIP_OF_MATCH_TABLE()					\
+	ACPI_PROBE_TABLE(irqchip)					\
+	ACPI_PROBE_TABLE(timer)						\
+	THERMAL_TABLE(governor)						\
+	EARLYCON_TABLE()						\
+	LSM_TABLE()							\
+	EARLY_LSM_TABLE()						\
+	KUNIT_TABLE()
+
+#define INIT_TEXT							\
+	*(.init.text .init.text.*)					\
+	*(.text.startup)						\
+	MEM_DISCARD(init.text*)
+
+#define EXIT_DATA							\
+	*(.exit.data .exit.data.*)					\
+	*(.fini_array .fini_array.*)					\
+	*(.dtors .dtors.*)						\
+	MEM_DISCARD(exit.data*)						\
+	MEM_DISCARD(exit.rodata*)
+
+#define EXIT_TEXT							\
+	*(.exit.text)							\
+	*(.text.exit)							\
+	MEM_DISCARD(exit.text)
+
+#define EXIT_CALL							\
+	*(.exitcall.exit)
+
+/*
+ * bss (Block Started by Symbol) - uninitialized data
+ * zeroed during startup
+ */
+#define SBSS(sbss_align)						\
+	. = ALIGN(sbss_align);						\
+	.sbss : AT(ADDR(.sbss) - LOAD_OFFSET) {				\
+		*(.dynsbss)						\
+		*(SBSS_MAIN)						\
+		*(.scommon)						\
+	}
+
+/*
+ * Allow archectures to redefine BSS_FIRST_SECTIONS to add extra
+ * sections to the front of bss.
+ */
+#ifndef BSS_FIRST_SECTIONS
+#define BSS_FIRST_SECTIONS
+#endif
+
+#define BSS(bss_align)							\
+	. = ALIGN(bss_align);						\
+	.bss : AT(ADDR(.bss) - LOAD_OFFSET) {				\
+		BSS_FIRST_SECTIONS					\
+		. = ALIGN(PAGE_SIZE);					\
+		*(.bss..page_aligned)					\
+		. = ALIGN(PAGE_SIZE);					\
+		*(.dynbss)						\
+		*(BSS_MAIN)						\
+		*(COMMON)						\
+	}
+
+/*
+ * DWARF debug sections.
+ * Symbols in the DWARF debugging sections are relative to
+ * the beginning of the section so we begin them at 0.
+ */
+#define DWARF_DEBUG							\
+		/* DWARF 1 */						\
+		.debug          0 : { *(.debug) }			\
+		.line           0 : { *(.line) }			\
+		/* GNU DWARF 1 extensions */				\
+		.debug_srcinfo  0 : { *(.debug_srcinfo) }		\
+		.debug_sfnames  0 : { *(.debug_sfnames) }		\
+		/* DWARF 1.1 and DWARF 2 */				\
+		.debug_aranges  0 : { *(.debug_aranges) }		\
+		.debug_pubnames 0 : { *(.debug_pubnames) }		\
+		/* DWARF 2 */						\
+		.debug_info     0 : { *(.debug_info			\
+				.gnu.linkonce.wi.*) }			\
+		.debug_abbrev   0 : { *(.debug_abbrev) }		\
+		.debug_line     0 : { *(.debug_line) }			\
+		.debug_frame    0 : { *(.debug_frame) }			\
+		.debug_str      0 : { *(.debug_str) }			\
+		.debug_loc      0 : { *(.debug_loc) }			\
+		.debug_macinfo  0 : { *(.debug_macinfo) }		\
+		.debug_pubtypes 0 : { *(.debug_pubtypes) }		\
+		/* DWARF 3 */						\
+		.debug_ranges	0 : { *(.debug_ranges) }		\
+		/* SGI/MIPS DWARF 2 extensions */			\
+		.debug_weaknames 0 : { *(.debug_weaknames) }		\
+		.debug_funcnames 0 : { *(.debug_funcnames) }		\
+		.debug_typenames 0 : { *(.debug_typenames) }		\
+		.debug_varnames  0 : { *(.debug_varnames) }		\
+		/* GNU DWARF 2 extensions */				\
+		.debug_gnu_pubnames 0 : { *(.debug_gnu_pubnames) }	\
+		.debug_gnu_pubtypes 0 : { *(.debug_gnu_pubtypes) }	\
+		/* DWARF 4 */						\
+		.debug_types	0 : { *(.debug_types) }			\
+		/* DWARF 5 */						\
+		.debug_addr	0 : { *(.debug_addr) }			\
+		.debug_line_str	0 : { *(.debug_line_str) }		\
+		.debug_loclists	0 : { *(.debug_loclists) }		\
+		.debug_macro	0 : { *(.debug_macro) }			\
+		.debug_names	0 : { *(.debug_names) }			\
+		.debug_rnglists	0 : { *(.debug_rnglists) }		\
+		.debug_str_offsets	0 : { *(.debug_str_offsets) }
+
+/* Stabs debugging sections. */
+#define STABS_DEBUG							\
+		.stab 0 : { *(.stab) }					\
+		.stabstr 0 : { *(.stabstr) }				\
+		.stab.excl 0 : { *(.stab.excl) }			\
+		.stab.exclstr 0 : { *(.stab.exclstr) }			\
+		.stab.index 0 : { *(.stab.index) }			\
+		.stab.indexstr 0 : { *(.stab.indexstr) }
+
+/* Required sections not related to debugging. */
+#define ELF_DETAILS							\
+		.comment 0 : { *(.comment) }				\
+		.symtab 0 : { *(.symtab) }				\
+		.strtab 0 : { *(.strtab) }				\
+		.shstrtab 0 : { *(.shstrtab) }
+
+#ifdef CONFIG_GENERIC_BUG
+#define BUG_TABLE							\
+	. = ALIGN(8);							\
+	__bug_table : AT(ADDR(__bug_table) - LOAD_OFFSET) {		\
+		__start___bug_table = .;				\
+		KEEP(*(__bug_table))					\
+		__stop___bug_table = .;					\
+	}
+#else
+#define BUG_TABLE
+#endif
+
+#ifdef CONFIG_UNWINDER_ORC
+#define ORC_UNWIND_TABLE						\
+	. = ALIGN(4);							\
+	.orc_unwind_ip : AT(ADDR(.orc_unwind_ip) - LOAD_OFFSET) {	\
+		__start_orc_unwind_ip = .;				\
+		KEEP(*(.orc_unwind_ip))					\
+		__stop_orc_unwind_ip = .;				\
+	}								\
+	. = ALIGN(2);							\
+	.orc_unwind : AT(ADDR(.orc_unwind) - LOAD_OFFSET) {		\
+		__start_orc_unwind = .;					\
+		KEEP(*(.orc_unwind))					\
+		__stop_orc_unwind = .;					\
+	}								\
+	. = ALIGN(4);							\
+	.orc_lookup : AT(ADDR(.orc_lookup) - LOAD_OFFSET) {		\
+		orc_lookup = .;						\
+		. += (((SIZEOF(.text) + LOOKUP_BLOCK_SIZE - 1) /	\
+			LOOKUP_BLOCK_SIZE) + 1) * 4;			\
+		orc_lookup_end = .;					\
+	}
+#else
+#define ORC_UNWIND_TABLE
+#endif
+
+#ifdef CONFIG_PM_TRACE
+#define TRACEDATA							\
+	. = ALIGN(4);							\
+	.tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) {		\
+		__tracedata_start = .;					\
+		KEEP(*(.tracedata))					\
+		__tracedata_end = .;					\
+	}
+#else
+#define TRACEDATA
+#endif
+
+/*
+ * Discard .note.GNU-stack, which is emitted as PROGBITS by the compiler.
+ * Otherwise, the type of .notes section would become PROGBITS instead of NOTES.
+ */
+#define NOTES								\
+	/DISCARD/ : { *(.note.GNU-stack) }				\
+	.notes : AT(ADDR(.notes) - LOAD_OFFSET) {			\
+		__start_notes = .;					\
+		KEEP(*(.note.*))					\
+		__stop_notes = .;					\
+	} NOTES_HEADERS							\
+	NOTES_HEADERS_RESTORE
+
+#define INIT_SETUP(initsetup_align)					\
+		. = ALIGN(initsetup_align);				\
+		__setup_start = .;					\
+		KEEP(*(.init.setup))					\
+		__setup_end = .;
+
+#define INIT_CALLS_LEVEL(level)						\
+		__initcall##level##_start = .;				\
+		KEEP(*(.initcall##level##.init))			\
+		KEEP(*(.initcall##level##s.init))			\
+
+#define INIT_CALLS							\
+		__initcall_start = .;					\
+		KEEP(*(.initcallearly.init))				\
+		INIT_CALLS_LEVEL(0)					\
+		INIT_CALLS_LEVEL(1)					\
+		INIT_CALLS_LEVEL(2)					\
+		INIT_CALLS_LEVEL(3)					\
+		INIT_CALLS_LEVEL(4)					\
+		INIT_CALLS_LEVEL(5)					\
+		INIT_CALLS_LEVEL(rootfs)				\
+		INIT_CALLS_LEVEL(6)					\
+		INIT_CALLS_LEVEL(7)					\
+		__initcall_end = .;
+
+#define CON_INITCALL							\
+		__con_initcall_start = .;				\
+		KEEP(*(.con_initcall.init))				\
+		__con_initcall_end = .;
+
+/* Alignment must be consistent with (kunit_suite *) in include/kunit/test.h */
+#define KUNIT_TABLE()							\
+		. = ALIGN(8);						\
+		__kunit_suites_start = .;				\
+		KEEP(*(.kunit_test_suites))				\
+		__kunit_suites_end = .;
+
+#ifdef CONFIG_BLK_DEV_INITRD
+#define INIT_RAM_FS							\
+	. = ALIGN(4);							\
+	__initramfs_start = .;						\
+	KEEP(*(.init.ramfs))						\
+	. = ALIGN(8);							\
+	KEEP(*(.init.ramfs.info))
+#else
+#define INIT_RAM_FS
+#endif
+
+/*
+ * Memory encryption operates on a page basis. Since we need to clear
+ * the memory encryption mask for this section, it needs to be aligned
+ * on a page boundary and be a page-size multiple in length.
+ *
+ * Note: We use a separate section so that only this section gets
+ * decrypted to avoid exposing more than we wish.
+ */
+#ifdef CONFIG_AMD_MEM_ENCRYPT
+#define PERCPU_DECRYPTED_SECTION					\
+	. = ALIGN(PAGE_SIZE);						\
+	*(.data..percpu..decrypted)					\
+	. = ALIGN(PAGE_SIZE);
+#else
+#define PERCPU_DECRYPTED_SECTION
+#endif
+
+
+/*
+ * Default discarded sections.
+ *
+ * Some archs want to discard exit text/data at runtime rather than
+ * link time due to cross-section references such as alt instructions,
+ * bug table, eh_frame, etc.  DISCARDS must be the last of output
+ * section definitions so that such archs put those in earlier section
+ * definitions.
+ */
+#ifdef RUNTIME_DISCARD_EXIT
+#define EXIT_DISCARDS
+#else
+#define EXIT_DISCARDS							\
+	EXIT_TEXT							\
+	EXIT_DATA
+#endif
+
+/*
+ * Clang's -fprofile-arcs, -fsanitize=kernel-address, and
+ * -fsanitize=thread produce unwanted sections (.eh_frame
+ * and .init_array.*), but CONFIG_CONSTRUCTORS wants to
+ * keep any .init_array.* sections.
+ * https://bugs.llvm.org/show_bug.cgi?id=46478
+ */
+#if defined(CONFIG_GCOV_KERNEL) || defined(CONFIG_KASAN_GENERIC) || defined(CONFIG_KCSAN)
+# ifdef CONFIG_CONSTRUCTORS
+#  define SANITIZER_DISCARDS						\
+	*(.eh_frame)
+# else
+#  define SANITIZER_DISCARDS						\
+	*(.init_array) *(.init_array.*)					\
+	*(.eh_frame)
+# endif
+#else
+# define SANITIZER_DISCARDS
+#endif
+
+#define COMMON_DISCARDS							\
+	SANITIZER_DISCARDS						\
+	*(.discard)							\
+	*(.discard.*)							\
+	*(.modinfo)							\
+	/* ld.bfd warns about .gnu.version* even when not emitted */	\
+	*(.gnu.version*)						\
+
+#define DISCARDS							\
+	/DISCARD/ : {							\
+	EXIT_DISCARDS							\
+	EXIT_CALL							\
+	COMMON_DISCARDS							\
+	}
+
+/**
+ * PERCPU_INPUT - the percpu input sections
+ * @cacheline: cacheline size
+ *
+ * The core percpu section names and core symbols which do not rely
+ * directly upon load addresses.
+ *
+ * @cacheline is used to align subsections to avoid false cacheline
+ * sharing between subsections for different purposes.
+ */
+#define PERCPU_INPUT(cacheline)						\
+	__per_cpu_start = .;						\
+	*(.data..percpu..first)						\
+	. = ALIGN(PAGE_SIZE);						\
+	*(.data..percpu..page_aligned)					\
+	. = ALIGN(cacheline);						\
+	*(.data..percpu..read_mostly)					\
+	. = ALIGN(cacheline);						\
+	*(.data..percpu)						\
+	*(.data..percpu..shared_aligned)				\
+	PERCPU_DECRYPTED_SECTION					\
+	__per_cpu_end = .;
+
+/**
+ * PERCPU_VADDR - define output section for percpu area
+ * @cacheline: cacheline size
+ * @vaddr: explicit base address (optional)
+ * @phdr: destination PHDR (optional)
+ *
+ * Macro which expands to output section for percpu area.
+ *
+ * @cacheline is used to align subsections to avoid false cacheline
+ * sharing between subsections for different purposes.
+ *
+ * If @vaddr is not blank, it specifies explicit base address and all
+ * percpu symbols will be offset from the given address.  If blank,
+ * @vaddr always equals @laddr + LOAD_OFFSET.
+ *
+ * @phdr defines the output PHDR to use if not blank.  Be warned that
+ * output PHDR is sticky.  If @phdr is specified, the next output
+ * section in the linker script will go there too.  @phdr should have
+ * a leading colon.
+ *
+ * Note that this macros defines __per_cpu_load as an absolute symbol.
+ * If there is no need to put the percpu section at a predetermined
+ * address, use PERCPU_SECTION.
+ */
+#define PERCPU_VADDR(cacheline, vaddr, phdr)				\
+	__per_cpu_load = .;						\
+	.data..percpu vaddr : AT(__per_cpu_load - LOAD_OFFSET) {	\
+		PERCPU_INPUT(cacheline)					\
+	} phdr								\
+	. = __per_cpu_load + SIZEOF(.data..percpu);
+
+/**
+ * PERCPU_SECTION - define output section for percpu area, simple version
+ * @cacheline: cacheline size
+ *
+ * Align to PAGE_SIZE and outputs output section for percpu area.  This
+ * macro doesn't manipulate @vaddr or @phdr and __per_cpu_load and
+ * __per_cpu_start will be identical.
+ *
+ * This macro is equivalent to ALIGN(PAGE_SIZE); PERCPU_VADDR(@cacheline,,)
+ * except that __per_cpu_load is defined as a relative symbol against
+ * .data..percpu which is required for relocatable x86_32 configuration.
+ */
+#define PERCPU_SECTION(cacheline)					\
+	. = ALIGN(PAGE_SIZE);						\
+	.data..percpu	: AT(ADDR(.data..percpu) - LOAD_OFFSET) {	\
+		__per_cpu_load = .;					\
+		PERCPU_INPUT(cacheline)					\
+	}
+
+
+/*
+ * Definition of the high level *_SECTION macros
+ * They will fit only a subset of the architectures
+ */
+
+
+/*
+ * Writeable data.
+ * All sections are combined in a single .data section.
+ * The sections following CONSTRUCTORS are arranged so their
+ * typical alignment matches.
+ * A cacheline is typical/always less than a PAGE_SIZE so
+ * the sections that has this restriction (or similar)
+ * is located before the ones requiring PAGE_SIZE alignment.
+ * NOSAVE_DATA starts and ends with a PAGE_SIZE alignment which
+ * matches the requirement of PAGE_ALIGNED_DATA.
+ *
+ * use 0 as page_align if page_aligned data is not used */
+#define RW_DATA(cacheline, pagealigned, inittask)			\
+	. = ALIGN(PAGE_SIZE);						\
+	.data : AT(ADDR(.data) - LOAD_OFFSET) {				\
+		INIT_TASK_DATA(inittask)				\
+		NOSAVE_DATA						\
+		PAGE_ALIGNED_DATA(pagealigned)				\
+		CACHELINE_ALIGNED_DATA(cacheline)			\
+		READ_MOSTLY_DATA(cacheline)				\
+		DATA_DATA						\
+		CONSTRUCTORS						\
+	}								\
+	BUG_TABLE							\
+
+#define INIT_TEXT_SECTION(inittext_align)				\
+	. = ALIGN(inittext_align);					\
+	.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {		\
+		_sinittext = .;						\
+		INIT_TEXT						\
+		_einittext = .;						\
+	}
+
+#define INIT_DATA_SECTION(initsetup_align)				\
+	.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {		\
+		INIT_DATA						\
+		INIT_SETUP(initsetup_align)				\
+		INIT_CALLS						\
+		CON_INITCALL						\
+		INIT_RAM_FS						\
+	}
+
+#define BSS_SECTION(sbss_align, bss_align, stop_align)			\
+	. = ALIGN(sbss_align);						\
+	__bss_start = .;						\
+	SBSS(sbss_align)						\
+	BSS(bss_align)							\
+	. = ALIGN(stop_align);						\
+	__bss_stop = .;