Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

48 files changed, 2298 insertions, 0 deletions

diff --git a/include/media/i2c/ad9389b.h b/include/media/i2c/ad9389b.h
new file mode 100644
index 000000000..30f9ea9a1
--- /dev/null
+++ b/include/media/i2c/ad9389b.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Analog Devices AD9389B/AD9889B video encoder driver header
+ *
+ * Copyright 2012 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef AD9389B_H
+#define AD9389B_H
+
+enum ad9389b_tmds_pll_gear {
+	AD9389B_TMDS_PLL_GEAR_AUTOMATIC,
+	AD9389B_TMDS_PLL_GEAR_SEMI_AUTOMATIC,
+};
+
+/* Platform dependent definitions */
+struct ad9389b_platform_data {
+	enum ad9389b_tmds_pll_gear tmds_pll_gear ;
+	/* Differential Data/Clock Output Drive Strength (reg. 0xa2/0xa3) */
+	u8 diff_data_drive_strength;
+	u8 diff_clk_drive_strength;
+};
+
+/* notify events */
+#define AD9389B_MONITOR_DETECT 0
+#define AD9389B_EDID_DETECT 1
+
+struct ad9389b_monitor_detect {
+	int present;
+};
+
+struct ad9389b_edid_detect {
+	int present;
+	int segment;
+};
+
+#endif
diff --git a/include/media/i2c/adp1653.h b/include/media/i2c/adp1653.h
new file mode 100644
index 000000000..096de9130
--- /dev/null
+++ b/include/media/i2c/adp1653.h
@@ -0,0 +1,114 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * include/media/i2c/adp1653.h
+ *
+ * Copyright (C) 2008--2011 Nokia Corporation
+ *
+ * Contact: Sakari Ailus <sakari.ailus@iki.fi>
+ *
+ * Contributors:
+ *	Sakari Ailus <sakari.ailus@iki.fi>
+ *	Tuukka Toivonen <tuukkat76@gmail.com>
+ */
+
+#ifndef ADP1653_H
+#define ADP1653_H
+
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-subdev.h>
+
+#define ADP1653_NAME				"adp1653"
+#define ADP1653_I2C_ADDR			(0x60 >> 1)
+
+/* Register definitions */
+#define ADP1653_REG_OUT_SEL			0x00
+#define ADP1653_REG_OUT_SEL_HPLED_TORCH_MIN	0x01
+#define ADP1653_REG_OUT_SEL_HPLED_TORCH_MAX	0x0b
+#define ADP1653_REG_OUT_SEL_HPLED_FLASH_MIN	0x0c
+#define ADP1653_REG_OUT_SEL_HPLED_FLASH_MAX	0x1f
+#define ADP1653_REG_OUT_SEL_HPLED_SHIFT		3
+#define ADP1653_REG_OUT_SEL_ILED_MAX		0x07
+#define ADP1653_REG_OUT_SEL_ILED_SHIFT		0
+
+#define ADP1653_REG_CONFIG			0x01
+#define ADP1653_REG_CONFIG_TMR_CFG		(1 << 4)
+#define ADP1653_REG_CONFIG_TMR_SET_MAX		0x0f
+#define ADP1653_REG_CONFIG_TMR_SET_SHIFT	0
+
+#define ADP1653_REG_SW_STROBE			0x02
+#define ADP1653_REG_SW_STROBE_SW_STROBE		(1 << 0)
+
+#define ADP1653_REG_FAULT			0x03
+#define ADP1653_REG_FAULT_FLT_SCP		(1 << 3)
+#define ADP1653_REG_FAULT_FLT_OT		(1 << 2)
+#define ADP1653_REG_FAULT_FLT_TMR		(1 << 1)
+#define ADP1653_REG_FAULT_FLT_OV		(1 << 0)
+
+#define ADP1653_INDICATOR_INTENSITY_MIN		0
+#define ADP1653_INDICATOR_INTENSITY_STEP	2500
+#define ADP1653_INDICATOR_INTENSITY_MAX		\
+	(ADP1653_REG_OUT_SEL_ILED_MAX * ADP1653_INDICATOR_INTENSITY_STEP)
+#define ADP1653_INDICATOR_INTENSITY_uA_TO_REG(a) \
+	((a) / ADP1653_INDICATOR_INTENSITY_STEP)
+#define ADP1653_INDICATOR_INTENSITY_REG_TO_uA(a) \
+	((a) * ADP1653_INDICATOR_INTENSITY_STEP)
+
+#define ADP1653_FLASH_INTENSITY_BASE		35
+#define ADP1653_FLASH_INTENSITY_STEP		15
+#define ADP1653_FLASH_INTENSITY_MIN					\
+	(ADP1653_FLASH_INTENSITY_BASE					\
+	 + ADP1653_REG_OUT_SEL_HPLED_FLASH_MIN * ADP1653_FLASH_INTENSITY_STEP)
+#define ADP1653_FLASH_INTENSITY_MAX			\
+	(ADP1653_FLASH_INTENSITY_MIN +			\
+	 (ADP1653_REG_OUT_SEL_HPLED_FLASH_MAX -		\
+	  ADP1653_REG_OUT_SEL_HPLED_FLASH_MIN + 1) *	\
+	 ADP1653_FLASH_INTENSITY_STEP)
+
+#define ADP1653_FLASH_INTENSITY_mA_TO_REG(a)				\
+	((a) < ADP1653_FLASH_INTENSITY_BASE ? 0 :			\
+	 (((a) - ADP1653_FLASH_INTENSITY_BASE) / ADP1653_FLASH_INTENSITY_STEP))
+#define ADP1653_FLASH_INTENSITY_REG_TO_mA(a)		\
+	((a) * ADP1653_FLASH_INTENSITY_STEP + ADP1653_FLASH_INTENSITY_BASE)
+
+#define ADP1653_TORCH_INTENSITY_MIN					\
+	(ADP1653_FLASH_INTENSITY_BASE					\
+	 + ADP1653_REG_OUT_SEL_HPLED_TORCH_MIN * ADP1653_FLASH_INTENSITY_STEP)
+#define ADP1653_TORCH_INTENSITY_MAX			\
+	(ADP1653_TORCH_INTENSITY_MIN +			\
+	 (ADP1653_REG_OUT_SEL_HPLED_TORCH_MAX -		\
+	  ADP1653_REG_OUT_SEL_HPLED_TORCH_MIN + 1) *	\
+	 ADP1653_FLASH_INTENSITY_STEP)
+
+struct adp1653_platform_data {
+	int (*power)(struct v4l2_subdev *sd, int on);
+
+	u32 max_flash_timeout;		/* flash light timeout in us */
+	u32 max_flash_intensity;	/* led intensity, flash mode, mA */
+	u32 max_torch_intensity;	/* led intensity, torch mode, mA */
+	u32 max_indicator_intensity;	/* indicator led intensity, uA */
+
+	struct gpio_desc *enable_gpio;	/* for device-tree based boot */
+};
+
+#define to_adp1653_flash(sd)	container_of(sd, struct adp1653_flash, subdev)
+
+struct adp1653_flash {
+	struct v4l2_subdev subdev;
+	struct adp1653_platform_data *platform_data;
+
+	struct v4l2_ctrl_handler ctrls;
+	struct v4l2_ctrl *led_mode;
+	struct v4l2_ctrl *flash_timeout;
+	struct v4l2_ctrl *flash_intensity;
+	struct v4l2_ctrl *torch_intensity;
+	struct v4l2_ctrl *indicator_intensity;
+
+	struct mutex power_lock;
+	int power_count;
+	int fault;
+};
+
+#endif /* ADP1653_H */
diff --git a/include/media/i2c/adv7183.h b/include/media/i2c/adv7183.h
new file mode 100644
index 000000000..49faece29
--- /dev/null
+++ b/include/media/i2c/adv7183.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * adv7183.h - definition for adv7183 inputs and outputs
+ *
+ * Copyright (c) 2011 Analog Devices Inc.
+ */
+
+#ifndef _ADV7183_H_
+#define _ADV7183_H_
+
+/* ADV7183 HW inputs */
+#define ADV7183_COMPOSITE0  0  /* CVBS in on AIN1 */
+#define ADV7183_COMPOSITE1  1  /* CVBS in on AIN2 */
+#define ADV7183_COMPOSITE2  2  /* CVBS in on AIN3 */
+#define ADV7183_COMPOSITE3  3  /* CVBS in on AIN4 */
+#define ADV7183_COMPOSITE4  4  /* CVBS in on AIN5 */
+#define ADV7183_COMPOSITE5  5  /* CVBS in on AIN6 */
+#define ADV7183_COMPOSITE6  6  /* CVBS in on AIN7 */
+#define ADV7183_COMPOSITE7  7  /* CVBS in on AIN8 */
+#define ADV7183_COMPOSITE8  8  /* CVBS in on AIN9 */
+#define ADV7183_COMPOSITE9  9  /* CVBS in on AIN10 */
+#define ADV7183_COMPOSITE10 10 /* CVBS in on AIN11 */
+
+#define ADV7183_SVIDEO0     11 /* Y on AIN1, C on AIN4 */
+#define ADV7183_SVIDEO1     12 /* Y on AIN2, C on AIN5 */
+#define ADV7183_SVIDEO2     13 /* Y on AIN3, C on AIN6 */
+
+#define ADV7183_COMPONENT0  14 /* Y on AIN1, Pr on AIN4, Pb on AIN5 */
+#define ADV7183_COMPONENT1  15 /* Y on AIN2, Pr on AIN3, Pb on AIN6 */
+
+/* ADV7183 HW outputs */
+#define ADV7183_8BIT_OUT    0
+#define ADV7183_16BIT_OUT   1
+
+#endif
diff --git a/include/media/i2c/adv7343.h b/include/media/i2c/adv7343.h
new file mode 100644
index 000000000..e4142b1ef
--- /dev/null
+++ b/include/media/i2c/adv7343.h
@@ -0,0 +1,63 @@
+/*
+ * ADV7343 header file
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed .as is. WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef ADV7343_H
+#define ADV7343_H
+
+#define ADV7343_COMPOSITE_ID	(0)
+#define ADV7343_COMPONENT_ID	(1)
+#define ADV7343_SVIDEO_ID	(2)
+
+/**
+ * adv7343_power_mode - power mode configuration.
+ * @sleep_mode: on enable the current consumption is reduced to micro ampere
+ *		level. All DACs and the internal PLL circuit are disabled.
+ *		Registers can be read from and written in sleep mode.
+ * @pll_control: PLL and oversampling control. This control allows internal
+ *		 PLL 1 circuit to be powered down and the oversampling to be
+ *		 switched off.
+ * @dac: array to configure power on/off DAC's 1..6
+ *
+ * Power mode register (Register 0x0), for more info refer REGISTER MAP ACCESS
+ * section of datasheet[1], table 17 page no 30.
+ *
+ * [1] http://www.analog.com/static/imported-files/data_sheets/ADV7342_7343.pdf
+ */
+struct adv7343_power_mode {
+	bool sleep_mode;
+	bool pll_control;
+	u32 dac[6];
+};
+
+/**
+ * struct adv7343_sd_config - SD Only Output Configuration.
+ * @sd_dac_out: array configuring SD DAC Outputs 1 and 2
+ */
+struct adv7343_sd_config {
+	/* SD only Output Configuration */
+	u32 sd_dac_out[2];
+};
+
+/**
+ * struct adv7343_platform_data - Platform data values and access functions.
+ * @mode_config: Configuration for power mode.
+ * @sd_config: SD Only Configuration.
+ */
+struct adv7343_platform_data {
+	struct adv7343_power_mode mode_config;
+	struct adv7343_sd_config sd_config;
+};
+
+#endif				/* End of #ifndef ADV7343_H */
diff --git a/include/media/i2c/adv7393.h b/include/media/i2c/adv7393.h
new file mode 100644
index 000000000..b28edf351
--- /dev/null
+++ b/include/media/i2c/adv7393.h
@@ -0,0 +1,28 @@
+/*
+ * ADV7393 header file
+ *
+ * Copyright (C) 2010-2012 ADVANSEE - http://www.advansee.com/
+ * Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
+ *
+ * Based on ADV7343 driver,
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed .as is. WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef ADV7393_H
+#define ADV7393_H
+
+#define ADV7393_COMPOSITE_ID	(0)
+#define ADV7393_COMPONENT_ID	(1)
+#define ADV7393_SVIDEO_ID	(2)
+
+#endif				/* End of #ifndef ADV7393_H */
diff --git a/include/media/i2c/adv7511.h b/include/media/i2c/adv7511.h
new file mode 100644
index 000000000..1874c05f4
--- /dev/null
+++ b/include/media/i2c/adv7511.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Analog Devices ADV7511 HDMI Transmitter Device Driver
+ *
+ * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef ADV7511_H
+#define ADV7511_H
+
+/* notify events */
+#define ADV7511_MONITOR_DETECT 0
+#define ADV7511_EDID_DETECT 1
+
+
+struct adv7511_monitor_detect {
+	int present;
+};
+
+struct adv7511_edid_detect {
+	int present;
+	int segment;
+	uint16_t phys_addr;
+};
+
+struct adv7511_platform_data {
+	u8 i2c_edid;
+	u8 i2c_cec;
+	u8 i2c_pktmem;
+	u32 cec_clk;
+};
+
+#endif
diff --git a/include/media/i2c/adv7604.h b/include/media/i2c/adv7604.h
new file mode 100644
index 000000000..77a979912
--- /dev/null
+++ b/include/media/i2c/adv7604.h
@@ -0,0 +1,157 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * adv7604 - Analog Devices ADV7604 video decoder driver
+ *
+ * Copyright 2012 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef _ADV7604_
+#define _ADV7604_
+
+#include <linux/types.h>
+
+/* Analog input muxing modes (AFE register 0x02, [2:0]) */
+enum adv7604_ain_sel {
+	ADV7604_AIN1_2_3_NC_SYNC_1_2 = 0,
+	ADV7604_AIN4_5_6_NC_SYNC_2_1 = 1,
+	ADV7604_AIN7_8_9_NC_SYNC_3_1 = 2,
+	ADV7604_AIN10_11_12_NC_SYNC_4_1 = 3,
+	ADV7604_AIN9_4_5_6_SYNC_2_1 = 4,
+};
+
+/*
+ * Bus rotation and reordering. This is used to specify component reordering on
+ * the board and describes the components order on the bus when the ADV7604
+ * outputs RGB.
+ */
+enum adv7604_bus_order {
+	ADV7604_BUS_ORDER_RGB,		/* No operation	*/
+	ADV7604_BUS_ORDER_GRB,		/* Swap 1-2	*/
+	ADV7604_BUS_ORDER_RBG,		/* Swap 2-3	*/
+	ADV7604_BUS_ORDER_BGR,		/* Swap 1-3	*/
+	ADV7604_BUS_ORDER_BRG,		/* Rotate right	*/
+	ADV7604_BUS_ORDER_GBR,		/* Rotate left	*/
+};
+
+/* Input Color Space (IO register 0x02, [7:4]) */
+enum adv76xx_inp_color_space {
+	ADV76XX_INP_COLOR_SPACE_LIM_RGB = 0,
+	ADV76XX_INP_COLOR_SPACE_FULL_RGB = 1,
+	ADV76XX_INP_COLOR_SPACE_LIM_YCbCr_601 = 2,
+	ADV76XX_INP_COLOR_SPACE_LIM_YCbCr_709 = 3,
+	ADV76XX_INP_COLOR_SPACE_XVYCC_601 = 4,
+	ADV76XX_INP_COLOR_SPACE_XVYCC_709 = 5,
+	ADV76XX_INP_COLOR_SPACE_FULL_YCbCr_601 = 6,
+	ADV76XX_INP_COLOR_SPACE_FULL_YCbCr_709 = 7,
+	ADV76XX_INP_COLOR_SPACE_AUTO = 0xf,
+};
+
+/* Select output format (IO register 0x03, [4:2]) */
+enum adv7604_op_format_mode_sel {
+	ADV7604_OP_FORMAT_MODE0 = 0x00,
+	ADV7604_OP_FORMAT_MODE1 = 0x04,
+	ADV7604_OP_FORMAT_MODE2 = 0x08,
+};
+
+enum adv76xx_drive_strength {
+	ADV76XX_DR_STR_MEDIUM_LOW = 1,
+	ADV76XX_DR_STR_MEDIUM_HIGH = 2,
+	ADV76XX_DR_STR_HIGH = 3,
+};
+
+/* INT1 Configuration (IO register 0x40, [1:0]) */
+enum adv76xx_int1_config {
+	ADV76XX_INT1_CONFIG_OPEN_DRAIN,
+	ADV76XX_INT1_CONFIG_ACTIVE_LOW,
+	ADV76XX_INT1_CONFIG_ACTIVE_HIGH,
+	ADV76XX_INT1_CONFIG_DISABLED,
+};
+
+enum adv76xx_page {
+	ADV76XX_PAGE_IO,
+	ADV7604_PAGE_AVLINK,
+	ADV76XX_PAGE_CEC,
+	ADV76XX_PAGE_INFOFRAME,
+	ADV7604_PAGE_ESDP,
+	ADV7604_PAGE_DPP,
+	ADV76XX_PAGE_AFE,
+	ADV76XX_PAGE_REP,
+	ADV76XX_PAGE_EDID,
+	ADV76XX_PAGE_HDMI,
+	ADV76XX_PAGE_TEST,
+	ADV76XX_PAGE_CP,
+	ADV7604_PAGE_VDP,
+	ADV76XX_PAGE_MAX,
+};
+
+/* Platform dependent definition */
+struct adv76xx_platform_data {
+	/* DIS_PWRDNB: 1 if the PWRDNB pin is unused and unconnected */
+	unsigned disable_pwrdnb:1;
+
+	/* DIS_CABLE_DET_RST: 1 if the 5V pins are unused and unconnected */
+	unsigned disable_cable_det_rst:1;
+
+	int default_input;
+
+	/* Analog input muxing mode */
+	enum adv7604_ain_sel ain_sel;
+
+	/* Bus rotation and reordering */
+	enum adv7604_bus_order bus_order;
+
+	/* Select output format mode */
+	enum adv7604_op_format_mode_sel op_format_mode_sel;
+
+	/* Configuration of the INT1 pin */
+	enum adv76xx_int1_config int1_config;
+
+	/* IO register 0x02 */
+	unsigned alt_gamma:1;
+
+	/* IO register 0x05 */
+	unsigned blank_data:1;
+	unsigned insert_av_codes:1;
+	unsigned replicate_av_codes:1;
+
+	/* IO register 0x06 */
+	unsigned inv_vs_pol:1;
+	unsigned inv_hs_pol:1;
+	unsigned inv_llc_pol:1;
+
+	/* IO register 0x14 */
+	enum adv76xx_drive_strength dr_str_data;
+	enum adv76xx_drive_strength dr_str_clk;
+	enum adv76xx_drive_strength dr_str_sync;
+
+	/* IO register 0x30 */
+	unsigned output_bus_lsb_to_msb:1;
+
+	/* Free run */
+	unsigned hdmi_free_run_mode;
+
+	/* i2c addresses: 0 == use default */
+	u8 i2c_addresses[ADV76XX_PAGE_MAX];
+};
+
+enum adv76xx_pad {
+	ADV76XX_PAD_HDMI_PORT_A = 0,
+	ADV7604_PAD_HDMI_PORT_B = 1,
+	ADV7604_PAD_HDMI_PORT_C = 2,
+	ADV7604_PAD_HDMI_PORT_D = 3,
+	ADV7604_PAD_VGA_RGB = 4,
+	ADV7604_PAD_VGA_COMP = 5,
+	/* The source pad is either 1 (ADV7611) or 6 (ADV7604) */
+	ADV7604_PAD_SOURCE = 6,
+	ADV7611_PAD_SOURCE = 1,
+	ADV76XX_PAD_MAX = 7,
+};
+
+#define V4L2_CID_ADV_RX_ANALOG_SAMPLING_PHASE	(V4L2_CID_DV_CLASS_BASE + 0x1000)
+#define V4L2_CID_ADV_RX_FREE_RUN_COLOR_MANUAL	(V4L2_CID_DV_CLASS_BASE + 0x1001)
+#define V4L2_CID_ADV_RX_FREE_RUN_COLOR		(V4L2_CID_DV_CLASS_BASE + 0x1002)
+
+/* notify events */
+#define ADV76XX_HOTPLUG		1
+
+#endif
diff --git a/include/media/i2c/adv7842.h b/include/media/i2c/adv7842.h
new file mode 100644
index 000000000..05e01f0dd
--- /dev/null
+++ b/include/media/i2c/adv7842.h
@@ -0,0 +1,227 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * adv7842 - Analog Devices ADV7842 video decoder driver
+ *
+ * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef _ADV7842_
+#define _ADV7842_
+
+/* Analog input muxing modes (AFE register 0x02, [2:0]) */
+enum adv7842_ain_sel {
+	ADV7842_AIN1_2_3_NC_SYNC_1_2 = 0,
+	ADV7842_AIN4_5_6_NC_SYNC_2_1 = 1,
+	ADV7842_AIN7_8_9_NC_SYNC_3_1 = 2,
+	ADV7842_AIN10_11_12_NC_SYNC_4_1 = 3,
+	ADV7842_AIN9_4_5_6_SYNC_2_1 = 4,
+};
+
+/*
+ * Bus rotation and reordering. This is used to specify component reordering on
+ * the board and describes the components order on the bus when the ADV7842
+ * outputs RGB.
+ */
+enum adv7842_bus_order {
+	ADV7842_BUS_ORDER_RGB,		/* No operation	*/
+	ADV7842_BUS_ORDER_GRB,		/* Swap 1-2	*/
+	ADV7842_BUS_ORDER_RBG,		/* Swap 2-3	*/
+	ADV7842_BUS_ORDER_BGR,		/* Swap 1-3	*/
+	ADV7842_BUS_ORDER_BRG,		/* Rotate right	*/
+	ADV7842_BUS_ORDER_GBR,		/* Rotate left	*/
+};
+
+/* Input Color Space (IO register 0x02, [7:4]) */
+enum adv7842_inp_color_space {
+	ADV7842_INP_COLOR_SPACE_LIM_RGB = 0,
+	ADV7842_INP_COLOR_SPACE_FULL_RGB = 1,
+	ADV7842_INP_COLOR_SPACE_LIM_YCbCr_601 = 2,
+	ADV7842_INP_COLOR_SPACE_LIM_YCbCr_709 = 3,
+	ADV7842_INP_COLOR_SPACE_XVYCC_601 = 4,
+	ADV7842_INP_COLOR_SPACE_XVYCC_709 = 5,
+	ADV7842_INP_COLOR_SPACE_FULL_YCbCr_601 = 6,
+	ADV7842_INP_COLOR_SPACE_FULL_YCbCr_709 = 7,
+	ADV7842_INP_COLOR_SPACE_AUTO = 0xf,
+};
+
+/* Select output format (IO register 0x03, [4:2]) */
+enum adv7842_op_format_mode_sel {
+	ADV7842_OP_FORMAT_MODE0 = 0x00,
+	ADV7842_OP_FORMAT_MODE1 = 0x04,
+	ADV7842_OP_FORMAT_MODE2 = 0x08,
+};
+
+/* Mode of operation */
+enum adv7842_mode {
+	ADV7842_MODE_SDP,
+	ADV7842_MODE_COMP,
+	ADV7842_MODE_RGB,
+	ADV7842_MODE_HDMI
+};
+
+/* Video standard select (IO register 0x00, [5:0]) */
+enum adv7842_vid_std_select {
+	/* SDP */
+	ADV7842_SDP_VID_STD_CVBS_SD_4x1 = 0x01,
+	ADV7842_SDP_VID_STD_YC_SD4_x1 = 0x09,
+	/* RGB */
+	ADV7842_RGB_VID_STD_AUTO_GRAPH_MODE = 0x07,
+	/* HDMI GR */
+	ADV7842_HDMI_GR_VID_STD_AUTO_GRAPH_MODE = 0x02,
+	/* HDMI COMP */
+	ADV7842_HDMI_COMP_VID_STD_HD_1250P = 0x1e,
+};
+
+enum adv7842_select_input {
+	ADV7842_SELECT_HDMI_PORT_A,
+	ADV7842_SELECT_HDMI_PORT_B,
+	ADV7842_SELECT_VGA_RGB,
+	ADV7842_SELECT_VGA_COMP,
+	ADV7842_SELECT_SDP_CVBS,
+	ADV7842_SELECT_SDP_YC,
+};
+
+enum adv7842_drive_strength {
+	ADV7842_DR_STR_LOW = 0,
+	ADV7842_DR_STR_MEDIUM_LOW = 1,
+	ADV7842_DR_STR_MEDIUM_HIGH = 2,
+	ADV7842_DR_STR_HIGH = 3,
+};
+
+struct adv7842_sdp_csc_coeff {
+	bool manual;
+	u16 scaling;
+	u16 A1;
+	u16 A2;
+	u16 A3;
+	u16 A4;
+	u16 B1;
+	u16 B2;
+	u16 B3;
+	u16 B4;
+	u16 C1;
+	u16 C2;
+	u16 C3;
+	u16 C4;
+};
+
+struct adv7842_sdp_io_sync_adjustment {
+	bool adjust;
+	u16 hs_beg;
+	u16 hs_width;
+	u16 de_beg;
+	u16 de_end;
+	u8 vs_beg_o;
+	u8 vs_beg_e;
+	u8 vs_end_o;
+	u8 vs_end_e;
+	u8 de_v_beg_o;
+	u8 de_v_beg_e;
+	u8 de_v_end_o;
+	u8 de_v_end_e;
+};
+
+/* Platform dependent definition */
+struct adv7842_platform_data {
+	/* chip reset during probe */
+	unsigned chip_reset:1;
+
+	/* DIS_PWRDNB: 1 if the PWRDNB pin is unused and unconnected */
+	unsigned disable_pwrdnb:1;
+
+	/* DIS_CABLE_DET_RST: 1 if the 5V pins are unused and unconnected */
+	unsigned disable_cable_det_rst:1;
+
+	/* Analog input muxing mode */
+	enum adv7842_ain_sel ain_sel;
+
+	/* Bus rotation and reordering */
+	enum adv7842_bus_order bus_order;
+
+	/* Select output format mode */
+	enum adv7842_op_format_mode_sel op_format_mode_sel;
+
+	/* Default mode */
+	enum adv7842_mode mode;
+
+	/* Default input */
+	unsigned input;
+
+	/* Video standard */
+	enum adv7842_vid_std_select vid_std_select;
+
+	/* IO register 0x02 */
+	unsigned alt_gamma:1;
+
+	/* IO register 0x05 */
+	unsigned blank_data:1;
+	unsigned insert_av_codes:1;
+	unsigned replicate_av_codes:1;
+
+	/* IO register 0x30 */
+	unsigned output_bus_lsb_to_msb:1;
+
+	/* IO register 0x14 */
+	enum adv7842_drive_strength dr_str_data;
+	enum adv7842_drive_strength dr_str_clk;
+	enum adv7842_drive_strength dr_str_sync;
+
+	/*
+	 * IO register 0x19: Adjustment to the LLC DLL phase in
+	 * increments of 1/32 of a clock period.
+	 */
+	unsigned llc_dll_phase:5;
+
+	/* External RAM for 3-D comb or frame synchronizer */
+	unsigned sd_ram_size; /* ram size in MB */
+	unsigned sd_ram_ddr:1; /* ddr or sdr sdram */
+
+	/* HDMI free run, CP-reg 0xBA */
+	unsigned hdmi_free_run_enable:1;
+	/* 0 = Mode 0: run when there is no TMDS clock
+	   1 = Mode 1: run when there is no TMDS clock or the
+	       video resolution does not match programmed one. */
+	unsigned hdmi_free_run_mode:1;
+
+	/* SDP free run, CP-reg 0xDD */
+	unsigned sdp_free_run_auto:1;
+	unsigned sdp_free_run_man_col_en:1;
+	unsigned sdp_free_run_cbar_en:1;
+	unsigned sdp_free_run_force:1;
+
+	/* HPA manual (0) or auto (1), affects HDMI register 0x69 */
+	unsigned hpa_auto:1;
+
+	struct adv7842_sdp_csc_coeff sdp_csc_coeff;
+
+	struct adv7842_sdp_io_sync_adjustment sdp_io_sync_625;
+	struct adv7842_sdp_io_sync_adjustment sdp_io_sync_525;
+
+	/* i2c addresses */
+	u8 i2c_sdp_io;
+	u8 i2c_sdp;
+	u8 i2c_cp;
+	u8 i2c_vdp;
+	u8 i2c_afe;
+	u8 i2c_hdmi;
+	u8 i2c_repeater;
+	u8 i2c_edid;
+	u8 i2c_infoframe;
+	u8 i2c_cec;
+	u8 i2c_avlink;
+};
+
+#define V4L2_CID_ADV_RX_ANALOG_SAMPLING_PHASE	(V4L2_CID_DV_CLASS_BASE + 0x1000)
+#define V4L2_CID_ADV_RX_FREE_RUN_COLOR_MANUAL	(V4L2_CID_DV_CLASS_BASE + 0x1001)
+#define V4L2_CID_ADV_RX_FREE_RUN_COLOR		(V4L2_CID_DV_CLASS_BASE + 0x1002)
+
+/* custom ioctl, used to test the external RAM that's used by the
+ * deinterlacer. */
+#define ADV7842_CMD_RAM_TEST _IO('V', BASE_VIDIOC_PRIVATE)
+
+#define ADV7842_EDID_PORT_A   0
+#define ADV7842_EDID_PORT_B   1
+#define ADV7842_EDID_PORT_VGA 2
+#define ADV7842_PAD_SOURCE    3
+
+#endif
diff --git a/include/media/i2c/ak881x.h b/include/media/i2c/ak881x.h
new file mode 100644
index 000000000..ff0597131
--- /dev/null
+++ b/include/media/i2c/ak881x.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Header for AK8813 / AK8814 TV-ecoders from Asahi Kasei Microsystems Co., Ltd. (AKM)
+ *
+ * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ */
+
+#ifndef AK881X_H
+#define AK881X_H
+
+#define AK881X_IF_MODE_MASK	(3 << 0)
+#define AK881X_IF_MODE_BT656	(0 << 0)
+#define AK881X_IF_MODE_MASTER	(1 << 0)
+#define AK881X_IF_MODE_SLAVE	(2 << 0)
+#define AK881X_FIELD		(1 << 2)
+#define AK881X_COMPONENT	(1 << 3)
+
+struct ak881x_pdata {
+	unsigned long flags;
+};
+
+#endif
diff --git a/include/media/i2c/bt819.h b/include/media/i2c/bt819.h
new file mode 100644
index 000000000..70aa46bd5
--- /dev/null
+++ b/include/media/i2c/bt819.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+    bt819.h - bt819 notifications
+
+    Copyright (C) 2009 Hans Verkuil (hverkuil@xs4all.nl)
+
+*/
+
+#ifndef _BT819_H_
+#define _BT819_H_
+
+#include <linux/ioctl.h>
+
+/* v4l2_device notifications. */
+
+/* Needed to reset the FIFO buffer when changing the input
+   or the video standard.
+
+   Note: these ioctls that internal to the kernel and are never called
+   from userspace. */
+#define BT819_FIFO_RESET_LOW	_IO('b', 0)
+#define BT819_FIFO_RESET_HIGH	_IO('b', 1)
+
+#endif
diff --git a/include/media/i2c/cs5345.h b/include/media/i2c/cs5345.h
new file mode 100644
index 000000000..d41e4dca3
--- /dev/null
+++ b/include/media/i2c/cs5345.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+    cs5345.h - definition for cs5345 inputs and outputs
+
+    Copyright (C) 2007 Hans Verkuil (hverkuil@xs4all.nl)
+
+*/
+
+#ifndef _CS5345_H_
+#define _CS5345_H_
+
+/* CS5345 HW inputs */
+#define CS5345_IN_MIC 0
+#define CS5345_IN_1   1
+#define CS5345_IN_2   2
+#define CS5345_IN_3   3
+#define CS5345_IN_4   4
+#define CS5345_IN_5   5
+#define CS5345_IN_6   6
+
+#define CS5345_MCLK_1   0x00
+#define CS5345_MCLK_1_5 0x10
+#define CS5345_MCLK_2   0x20
+#define CS5345_MCLK_3   0x30
+#define CS5345_MCLK_4   0x40
+
+#endif
diff --git a/include/media/i2c/cs53l32a.h b/include/media/i2c/cs53l32a.h
new file mode 100644
index 000000000..52ceb2f91
--- /dev/null
+++ b/include/media/i2c/cs53l32a.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+    cs53l32a.h - definition for cs53l32a inputs and outputs
+
+    Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl)
+
+*/
+
+#ifndef _CS53L32A_H_
+#define _CS53L32A_H_
+
+/* There are 2 physical inputs, but the second input can be
+   placed in two modes, the first mode bypasses the PGA (gain),
+   the second goes through the PGA. Hence there are three
+   possible inputs to choose from. */
+
+/* CS53L32A HW inputs */
+#define CS53L32A_IN0 0
+#define CS53L32A_IN1 1
+#define CS53L32A_IN2 2
+
+#endif
diff --git a/include/media/i2c/ir-kbd-i2c.h b/include/media/i2c/ir-kbd-i2c.h
new file mode 100644
index 000000000..9f47d6a48
--- /dev/null
+++ b/include/media/i2c/ir-kbd-i2c.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _IR_I2C
+#define _IR_I2C
+
+#include <media/rc-core.h>
+
+#define DEFAULT_POLLING_INTERVAL	100	/* ms */
+
+struct IR_i2c;
+
+struct IR_i2c {
+	char		       *ir_codes;
+	struct i2c_client      *c;
+	struct rc_dev          *rc;
+
+	/* Used to avoid fast repeating */
+	unsigned char          old;
+
+	u32                    polling_interval; /* in ms */
+
+	struct delayed_work    work;
+	char                   phys[32];
+	int                    (*get_key)(struct IR_i2c *ir,
+					  enum rc_proto *protocol,
+					  u32 *scancode, u8 *toggle);
+	/* tx */
+	struct i2c_client      *tx_c;
+	struct mutex	       lock;	/* do not poll Rx during Tx */
+	unsigned int	       carrier;
+	unsigned int	       duty_cycle;
+};
+
+enum ir_kbd_get_key_fn {
+	IR_KBD_GET_KEY_CUSTOM = 0,
+	IR_KBD_GET_KEY_PIXELVIEW,
+	IR_KBD_GET_KEY_HAUP,
+	IR_KBD_GET_KEY_KNC1,
+	IR_KBD_GET_KEY_FUSIONHDTV,
+	IR_KBD_GET_KEY_HAUP_XVR,
+	IR_KBD_GET_KEY_AVERMEDIA_CARDBUS,
+};
+
+/* Can be passed when instantiating an ir_video i2c device */
+struct IR_i2c_init_data {
+	char			*ir_codes;
+	const char		*name;
+	u64			type; /* RC_PROTO_BIT_RC5, etc */
+	u32			polling_interval; /* 0 means DEFAULT_POLLING_INTERVAL */
+
+	/*
+	 * Specify either a function pointer or a value indicating one of
+	 * ir_kbd_i2c's internal get_key functions
+	 */
+	int                    (*get_key)(struct IR_i2c *ir,
+					  enum rc_proto *protocol,
+					  u32 *scancode, u8 *toggle);
+	enum ir_kbd_get_key_fn internal_get_key_func;
+
+	struct rc_dev		*rc_dev;
+};
+#endif
diff --git a/include/media/i2c/lm3560.h b/include/media/i2c/lm3560.h
new file mode 100644
index 000000000..770d8c72c
--- /dev/null
+++ b/include/media/i2c/lm3560.h
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * include/media/i2c/lm3560.h
+ *
+ * Copyright (C) 2013 Texas Instruments
+ *
+ * Contact: Daniel Jeong <gshark.jeong@gmail.com>
+ *			Ldd-Mlp <ldd-mlp@list.ti.com>
+ */
+
+#ifndef __LM3560_H__
+#define __LM3560_H__
+
+#include <media/v4l2-subdev.h>
+
+#define LM3559_NAME	"lm3559"
+#define LM3560_NAME	"lm3560"
+#define LM3560_I2C_ADDR	(0x53)
+
+/*  FLASH Brightness
+ *	min 62500uA, step 62500uA, max 1000000uA
+ */
+#define LM3560_FLASH_BRT_MIN 62500
+#define LM3560_FLASH_BRT_STEP 62500
+#define LM3560_FLASH_BRT_MAX 1000000
+#define LM3560_FLASH_BRT_uA_TO_REG(a)	\
+	((a) < LM3560_FLASH_BRT_MIN ? 0 :	\
+	 (((a) - LM3560_FLASH_BRT_MIN) / LM3560_FLASH_BRT_STEP))
+#define LM3560_FLASH_BRT_REG_TO_uA(a)		\
+	((a) * LM3560_FLASH_BRT_STEP + LM3560_FLASH_BRT_MIN)
+
+/*  FLASH TIMEOUT DURATION
+ *	min 32ms, step 32ms, max 1024ms
+ */
+#define LM3560_FLASH_TOUT_MIN 32
+#define LM3560_FLASH_TOUT_STEP 32
+#define LM3560_FLASH_TOUT_MAX 1024
+#define LM3560_FLASH_TOUT_ms_TO_REG(a)	\
+	((a) < LM3560_FLASH_TOUT_MIN ? 0 :	\
+	 (((a) - LM3560_FLASH_TOUT_MIN) / LM3560_FLASH_TOUT_STEP))
+#define LM3560_FLASH_TOUT_REG_TO_ms(a)		\
+	((a) * LM3560_FLASH_TOUT_STEP + LM3560_FLASH_TOUT_MIN)
+
+/*  TORCH BRT
+ *	min 31250uA, step 31250uA, max 250000uA
+ */
+#define LM3560_TORCH_BRT_MIN 31250
+#define LM3560_TORCH_BRT_STEP 31250
+#define LM3560_TORCH_BRT_MAX 250000
+#define LM3560_TORCH_BRT_uA_TO_REG(a)	\
+	((a) < LM3560_TORCH_BRT_MIN ? 0 :	\
+	 (((a) - LM3560_TORCH_BRT_MIN) / LM3560_TORCH_BRT_STEP))
+#define LM3560_TORCH_BRT_REG_TO_uA(a)		\
+	((a) * LM3560_TORCH_BRT_STEP + LM3560_TORCH_BRT_MIN)
+
+enum lm3560_led_id {
+	LM3560_LED0 = 0,
+	LM3560_LED1,
+	LM3560_LED_MAX
+};
+
+enum lm3560_peak_current {
+	LM3560_PEAK_1600mA = 0x00,
+	LM3560_PEAK_2300mA = 0x20,
+	LM3560_PEAK_3000mA = 0x40,
+	LM3560_PEAK_3600mA = 0x60
+};
+
+/* struct lm3560_platform_data
+ *
+ * @peak :  peak current
+ * @max_flash_timeout: flash timeout
+ * @max_flash_brt: flash mode led brightness
+ * @max_torch_brt: torch mode led brightness
+ */
+struct lm3560_platform_data {
+	enum lm3560_peak_current peak;
+
+	u32 max_flash_timeout;
+	u32 max_flash_brt[LM3560_LED_MAX];
+	u32 max_torch_brt[LM3560_LED_MAX];
+};
+
+#endif /* __LM3560_H__ */
diff --git a/include/media/i2c/lm3646.h b/include/media/i2c/lm3646.h
new file mode 100644
index 000000000..845f07b89
--- /dev/null
+++ b/include/media/i2c/lm3646.h
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * include/media/i2c/lm3646.h
+ *
+ * Copyright (C) 2014 Texas Instruments
+ *
+ * Contact: Daniel Jeong <gshark.jeong@gmail.com>
+ *			Ldd-Mlp <ldd-mlp@list.ti.com>
+ */
+
+#ifndef __LM3646_H__
+#define __LM3646_H__
+
+#include <media/v4l2-subdev.h>
+
+#define LM3646_NAME	"lm3646"
+#define LM3646_I2C_ADDR_REV1	(0x67)
+#define LM3646_I2C_ADDR_REV0	(0x63)
+
+/*  TOTAL FLASH Brightness Max
+ *	min 93350uA, step 93750uA, max 1499600uA
+ */
+#define LM3646_TOTAL_FLASH_BRT_MIN 93350
+#define LM3646_TOTAL_FLASH_BRT_STEP 93750
+#define LM3646_TOTAL_FLASH_BRT_MAX 1499600
+#define LM3646_TOTAL_FLASH_BRT_uA_TO_REG(a)	\
+	((a) < LM3646_TOTAL_FLASH_BRT_MIN ? 0 :	\
+	 ((((a) - LM3646_TOTAL_FLASH_BRT_MIN) / LM3646_TOTAL_FLASH_BRT_STEP)))
+
+/*  TOTAL TORCH Brightness Max
+ *	min 23040uA, step 23430uA, max 187100uA
+ */
+#define LM3646_TOTAL_TORCH_BRT_MIN 23040
+#define LM3646_TOTAL_TORCH_BRT_STEP 23430
+#define LM3646_TOTAL_TORCH_BRT_MAX 187100
+#define LM3646_TOTAL_TORCH_BRT_uA_TO_REG(a)	\
+	((a) < LM3646_TOTAL_TORCH_BRT_MIN ? 0 :	\
+	 ((((a) - LM3646_TOTAL_TORCH_BRT_MIN) / LM3646_TOTAL_TORCH_BRT_STEP)))
+
+/*  LED1 FLASH Brightness
+ *	min 23040uA, step 11718uA, max 1499600uA
+ */
+#define LM3646_LED1_FLASH_BRT_MIN 23040
+#define LM3646_LED1_FLASH_BRT_STEP 11718
+#define LM3646_LED1_FLASH_BRT_MAX 1499600
+#define LM3646_LED1_FLASH_BRT_uA_TO_REG(a)	\
+	((a) <= LM3646_LED1_FLASH_BRT_MIN ? 0 :	\
+	 ((((a) - LM3646_LED1_FLASH_BRT_MIN) / LM3646_LED1_FLASH_BRT_STEP))+1)
+
+/*  LED1 TORCH Brightness
+ *	min 2530uA, step 1460uA, max 187100uA
+ */
+#define LM3646_LED1_TORCH_BRT_MIN 2530
+#define LM3646_LED1_TORCH_BRT_STEP 1460
+#define LM3646_LED1_TORCH_BRT_MAX 187100
+#define LM3646_LED1_TORCH_BRT_uA_TO_REG(a)	\
+	((a) <= LM3646_LED1_TORCH_BRT_MIN ? 0 :	\
+	 ((((a) - LM3646_LED1_TORCH_BRT_MIN) / LM3646_LED1_TORCH_BRT_STEP))+1)
+
+/*  FLASH TIMEOUT DURATION
+ *	min 50ms, step 50ms, max 400ms
+ */
+#define LM3646_FLASH_TOUT_MIN 50
+#define LM3646_FLASH_TOUT_STEP 50
+#define LM3646_FLASH_TOUT_MAX 400
+#define LM3646_FLASH_TOUT_ms_TO_REG(a)	\
+	((a) <= LM3646_FLASH_TOUT_MIN ? 0 :	\
+	 (((a) - LM3646_FLASH_TOUT_MIN) / LM3646_FLASH_TOUT_STEP))
+
+/* struct lm3646_platform_data
+ *
+ * @flash_timeout: flash timeout
+ * @led1_flash_brt: led1 flash mode brightness, uA
+ * @led1_torch_brt: led1 torch mode brightness, uA
+ */
+struct lm3646_platform_data {
+
+	u32 flash_timeout;
+
+	u32 led1_flash_brt;
+	u32 led1_torch_brt;
+};
+
+#endif /* __LM3646_H__ */
diff --git a/include/media/i2c/m52790.h b/include/media/i2c/m52790.h
new file mode 100644
index 000000000..3f214fa9b
--- /dev/null
+++ b/include/media/i2c/m52790.h
@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+    m52790.h - definition for m52790 inputs and outputs
+
+    Copyright (C) 2007 Hans Verkuil (hverkuil@xs4all.nl)
+
+*/
+
+#ifndef _M52790_H_
+#define _M52790_H_
+
+/* Input routing switch 1 */
+
+#define M52790_SW1_IN_MASK	0x0003
+#define M52790_SW1_IN_TUNER	0x0000
+#define M52790_SW1_IN_V2	0x0001
+#define M52790_SW1_IN_V3	0x0002
+#define M52790_SW1_IN_V4	0x0003
+
+/* Selects component input instead of composite */
+#define M52790_SW1_YCMIX	0x0004
+
+
+/* Input routing switch 2 */
+
+#define M52790_SW2_IN_MASK	0x0300
+#define M52790_SW2_IN_TUNER	0x0000
+#define M52790_SW2_IN_V2	0x0100
+#define M52790_SW2_IN_V3	0x0200
+#define M52790_SW2_IN_V4	0x0300
+
+/* Selects component input instead of composite */
+#define M52790_SW2_YCMIX	0x0400
+
+
+/* Output routing switch 1 */
+
+/* Enable 6dB amplifier for composite out */
+#define M52790_SW1_V_AMP	0x0008
+
+/* Enable 6dB amplifier for component out */
+#define M52790_SW1_YC_AMP	0x0010
+
+/* Audio output mode */
+#define M52790_SW1_AUDIO_MASK	0x00c0
+#define M52790_SW1_AUDIO_MUTE	0x0000
+#define M52790_SW1_AUDIO_R	0x0040
+#define M52790_SW1_AUDIO_L	0x0080
+#define M52790_SW1_AUDIO_STEREO 0x00c0
+
+
+/* Output routing switch 2 */
+
+/* Enable 6dB amplifier for composite out */
+#define M52790_SW2_V_AMP	0x0800
+
+/* Enable 6dB amplifier for component out */
+#define M52790_SW2_YC_AMP	0x1000
+
+/* Audio output mode */
+#define M52790_SW2_AUDIO_MASK	0xc000
+#define M52790_SW2_AUDIO_MUTE	0x0000
+#define M52790_SW2_AUDIO_R	0x4000
+#define M52790_SW2_AUDIO_L	0x8000
+#define M52790_SW2_AUDIO_STEREO 0xc000
+
+
+/* Common values */
+#define M52790_IN_TUNER (M52790_SW1_IN_TUNER | M52790_SW2_IN_TUNER)
+#define M52790_IN_V2    (M52790_SW1_IN_V2 | M52790_SW2_IN_V2)
+#define M52790_IN_V3    (M52790_SW1_IN_V3 | M52790_SW2_IN_V3)
+#define M52790_IN_V4    (M52790_SW1_IN_V4 | M52790_SW2_IN_V4)
+
+#define M52790_OUT_STEREO	(M52790_SW1_AUDIO_STEREO | \
+				 M52790_SW2_AUDIO_STEREO)
+#define M52790_OUT_AMP_STEREO	(M52790_SW1_AUDIO_STEREO | \
+				 M52790_SW1_V_AMP | \
+				 M52790_SW2_AUDIO_STEREO | \
+				 M52790_SW2_V_AMP)
+
+#endif
diff --git a/include/media/i2c/m5mols.h b/include/media/i2c/m5mols.h
new file mode 100644
index 000000000..9cec5a09e
--- /dev/null
+++ b/include/media/i2c/m5mols.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Driver header for M-5MOLS 8M Pixel camera sensor with ISP
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ * Author: HeungJun Kim <riverful.kim@samsung.com>
+ *
+ * Copyright (C) 2009 Samsung Electronics Co., Ltd.
+ * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com>
+ */
+
+#ifndef MEDIA_M5MOLS_H
+#define MEDIA_M5MOLS_H
+
+/**
+ * struct m5mols_platform_data - platform data for M-5MOLS driver
+ * @gpio_reset:	GPIO driving the reset pin of M-5MOLS
+ * @reset_polarity: active state for gpio_reset pin, 0 or 1
+ * @set_power:	an additional callback to the board setup code
+ *		to be called after enabling and before disabling
+ *		the sensor's supply regulators
+ */
+struct m5mols_platform_data {
+	int gpio_reset;
+	u8 reset_polarity;
+	int (*set_power)(struct device *dev, int on);
+};
+
+#endif	/* MEDIA_M5MOLS_H */
diff --git a/include/media/i2c/mt9m032.h b/include/media/i2c/mt9m032.h
new file mode 100644
index 000000000..1bd587577
--- /dev/null
+++ b/include/media/i2c/mt9m032.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Driver for MT9M032 CMOS Image Sensor from Micron
+ *
+ * Copyright (C) 2010-2011 Lund Engineering
+ * Contact: Gil Lund <gwlund@lundeng.com>
+ * Author: Martin Hostettler <martin@neutronstar.dyndns.org>
+ */
+
+#ifndef MT9M032_H
+#define MT9M032_H
+
+#define MT9M032_NAME		"mt9m032"
+#define MT9M032_I2C_ADDR	(0xb8 >> 1)
+
+struct mt9m032_platform_data {
+	u32 ext_clock;
+	u32 pix_clock;
+	bool invert_pixclock;
+
+};
+#endif /* MT9M032_H */
diff --git a/include/media/i2c/mt9p031.h b/include/media/i2c/mt9p031.h
new file mode 100644
index 000000000..7c29c53aa
--- /dev/null
+++ b/include/media/i2c/mt9p031.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef MT9P031_H
+#define MT9P031_H
+
+struct v4l2_subdev;
+
+/*
+ * struct mt9p031_platform_data - MT9P031 platform data
+ * @ext_freq: Input clock frequency
+ * @target_freq: Pixel clock frequency
+ */
+struct mt9p031_platform_data {
+	int ext_freq;
+	int target_freq;
+};
+
+#endif
diff --git a/include/media/i2c/mt9t001.h b/include/media/i2c/mt9t001.h
new file mode 100644
index 000000000..4b1090554
--- /dev/null
+++ b/include/media/i2c/mt9t001.h
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _MEDIA_MT9T001_H
+#define _MEDIA_MT9T001_H
+
+struct mt9t001_platform_data {
+	unsigned int clk_pol:1;
+	unsigned int ext_clk;
+};
+
+#endif
diff --git a/include/media/i2c/mt9t112.h b/include/media/i2c/mt9t112.h
new file mode 100644
index 000000000..cc80d5cc2
--- /dev/null
+++ b/include/media/i2c/mt9t112.h
@@ -0,0 +1,27 @@
+/*  SPDX-License-Identifier: GPL-2.0 */
+/* mt9t112 Camera
+ *
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ */
+
+#ifndef __MT9T112_H__
+#define __MT9T112_H__
+
+struct mt9t112_pll_divider {
+	u8 m, n;
+	u8 p1, p2, p3, p4, p5, p6, p7;
+};
+
+/**
+ * mt9t112_platform_data -	mt9t112 driver interface
+ * @flags:			Sensor media bus configuration.
+ * @divider:			Sensor PLL configuration
+ */
+struct mt9t112_platform_data {
+#define MT9T112_FLAG_PCLK_RISING_EDGE	BIT(0)
+	u32 flags;
+	struct mt9t112_pll_divider divider;
+};
+
+#endif /* __MT9T112_H__ */
diff --git a/include/media/i2c/mt9v011.h b/include/media/i2c/mt9v011.h
new file mode 100644
index 000000000..41c00b3e7
--- /dev/null
+++ b/include/media/i2c/mt9v011.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* mt9v011 sensor
+ *
+ * Copyright (C) 2011 Hans Verkuil <hverkuil@xs4all.nl>
+ */
+
+#ifndef __MT9V011_H__
+#define __MT9V011_H__
+
+struct mt9v011_platform_data {
+	unsigned xtal;	/* Hz */
+};
+
+#endif
diff --git a/include/media/i2c/mt9v022.h b/include/media/i2c/mt9v022.h
new file mode 100644
index 000000000..6966eb538
--- /dev/null
+++ b/include/media/i2c/mt9v022.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * mt9v022 sensor
+ */
+
+#ifndef __MT9V022_H__
+#define __MT9V022_H__
+
+struct mt9v022_platform_data {
+	unsigned short y_skip_top;	/* Lines to skip at the top */
+};
+
+#endif
diff --git a/include/media/i2c/mt9v032.h b/include/media/i2c/mt9v032.h
new file mode 100644
index 000000000..83a37ccfb
--- /dev/null
+++ b/include/media/i2c/mt9v032.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _MEDIA_MT9V032_H
+#define _MEDIA_MT9V032_H
+
+struct mt9v032_platform_data {
+	unsigned int clk_pol:1;
+
+	const s64 *link_freqs;
+	s64 link_def_freq;
+};
+
+#endif
diff --git a/include/media/i2c/noon010pc30.h b/include/media/i2c/noon010pc30.h
new file mode 100644
index 000000000..a035d2d9a
--- /dev/null
+++ b/include/media/i2c/noon010pc30.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Driver header for NOON010PC30L camera sensor chip.
+ *
+ * Copyright (c) 2010 Samsung Electronics, Co. Ltd
+ * Contact: Sylwester Nawrocki <s.nawrocki@samsung.com>
+ */
+
+#ifndef NOON010PC30_H
+#define NOON010PC30_H
+
+/**
+ * @clk_rate: the clock frequency in Hz
+ * @gpio_nreset: GPIO driving nRESET pin
+ * @gpio_nstby: GPIO driving nSTBY pin
+ */
+
+struct noon010pc30_platform_data {
+	unsigned long clk_rate;
+	int gpio_nreset;
+	int gpio_nstby;
+};
+
+#endif /* NOON010PC30_H */
diff --git a/include/media/i2c/ov2659.h b/include/media/i2c/ov2659.h
new file mode 100644
index 000000000..4216adc1e
--- /dev/null
+++ b/include/media/i2c/ov2659.h
@@ -0,0 +1,34 @@
+/*
+ * Omnivision OV2659 CMOS Image Sensor driver
+ *
+ * Copyright (C) 2015 Texas Instruments, Inc.
+ *
+ * Benoit Parrot <bparrot@ti.com>
+ * Lad, Prabhakar <prabhakar.csengg@gmail.com>
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#ifndef OV2659_H
+#define OV2659_H
+
+/**
+ * struct ov2659_platform_data - ov2659 driver platform data
+ * @link_frequency: target pixel clock frequency
+ */
+struct ov2659_platform_data {
+	s64 link_frequency;
+};
+
+#endif /* OV2659_H */
diff --git a/include/media/i2c/ov7670.h b/include/media/i2c/ov7670.h
new file mode 100644
index 000000000..8686fc212
--- /dev/null
+++ b/include/media/i2c/ov7670.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * A V4L2 driver for OmniVision OV7670 cameras.
+ *
+ * Copyright 2010 One Laptop Per Child
+ */
+
+#ifndef __OV7670_H
+#define __OV7670_H
+
+struct ov7670_config {
+	int min_width;			/* Filter out smaller sizes */
+	int min_height;			/* Filter out smaller sizes */
+	int clock_speed;		/* External clock speed (MHz) */
+	bool use_smbus;			/* Use smbus I/O instead of I2C */
+	bool pll_bypass;		/* Choose whether to bypass the PLL */
+	bool pclk_hb_disable;		/* Disable toggling pixclk during horizontal blanking */
+};
+
+#endif
diff --git a/include/media/i2c/ov772x.h b/include/media/i2c/ov772x.h
new file mode 100644
index 000000000..a1702d420
--- /dev/null
+++ b/include/media/i2c/ov772x.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * ov772x Camera
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ */
+
+#ifndef __OV772X_H__
+#define __OV772X_H__
+
+/* for flags */
+#define OV772X_FLAG_VFLIP	(1 << 0) /* Vertical flip image */
+#define OV772X_FLAG_HFLIP	(1 << 1) /* Horizontal flip image */
+
+/*
+ * for Edge ctrl
+ *
+ * strength also control Auto or Manual Edge Control Mode
+ * see also OV772X_MANUAL_EDGE_CTRL
+ */
+struct ov772x_edge_ctrl {
+	unsigned char strength;
+	unsigned char threshold;
+	unsigned char upper;
+	unsigned char lower;
+};
+
+#define OV772X_MANUAL_EDGE_CTRL		0x80 /* un-used bit of strength */
+#define OV772X_EDGE_STRENGTH_MASK	0x1F
+#define OV772X_EDGE_THRESHOLD_MASK	0x0F
+#define OV772X_EDGE_UPPER_MASK		0xFF
+#define OV772X_EDGE_LOWER_MASK		0xFF
+
+#define OV772X_AUTO_EDGECTRL(u, l)	\
+{					\
+	.upper = (u & OV772X_EDGE_UPPER_MASK),	\
+	.lower = (l & OV772X_EDGE_LOWER_MASK),	\
+}
+
+#define OV772X_MANUAL_EDGECTRL(s, t)			\
+{							\
+	.strength  = (s & OV772X_EDGE_STRENGTH_MASK) |	\
+			OV772X_MANUAL_EDGE_CTRL,	\
+	.threshold = (t & OV772X_EDGE_THRESHOLD_MASK),	\
+}
+
+/**
+ * ov772x_camera_info -	ov772x driver interface structure
+ * @flags:		Sensor configuration flags
+ * @edgectrl:		Sensor edge control
+ */
+struct ov772x_camera_info {
+	unsigned long		flags;
+	struct ov772x_edge_ctrl	edgectrl;
+};
+
+#endif /* __OV772X_H__ */
diff --git a/include/media/i2c/ov9650.h b/include/media/i2c/ov9650.h
new file mode 100644
index 000000000..3ec7e0695
--- /dev/null
+++ b/include/media/i2c/ov9650.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * OV9650/OV9652 camera sensors driver
+ *
+ * Copyright (C) 2013 Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
+ */
+#ifndef OV9650_H_
+#define OV9650_H_
+
+/**
+ * struct ov9650_platform_data - ov9650 driver platform data
+ * @mclk_frequency: the sensor's master clock frequency in Hz
+ * @gpio_pwdn:	    number of a GPIO connected to OV965X PWDN pin
+ * @gpio_reset:     number of a GPIO connected to OV965X RESET pin
+ *
+ * If any of @gpio_pwdn or @gpio_reset are unused then they should be
+ * set to a negative value. @mclk_frequency must always be specified.
+ */
+struct ov9650_platform_data {
+	unsigned long mclk_frequency;
+	int gpio_pwdn;
+	int gpio_reset;
+};
+#endif /* OV9650_H_ */
diff --git a/include/media/i2c/rj54n1cb0c.h b/include/media/i2c/rj54n1cb0c.h
new file mode 100644
index 000000000..5689c09b9
--- /dev/null
+++ b/include/media/i2c/rj54n1cb0c.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * RJ54N1CB0C Private data
+ *
+ * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+ */
+
+#ifndef __RJ54N1CB0C_H__
+#define __RJ54N1CB0C_H__
+
+struct rj54n1_pdata {
+	unsigned int	mclk_freq;
+	bool		ioctl_high;
+};
+
+#endif
diff --git a/include/media/i2c/s5c73m3.h b/include/media/i2c/s5c73m3.h
new file mode 100644
index 000000000..ccb9e5448
--- /dev/null
+++ b/include/media/i2c/s5c73m3.h
@@ -0,0 +1,55 @@
+/*
+ * Samsung LSI S5C73M3 8M pixel camera driver
+ *
+ * Copyright (C) 2012, Samsung Electronics, Co., Ltd.
+ * Sylwester Nawrocki <s.nawrocki@samsung.com>
+ * Andrzej Hajda <a.hajda@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef MEDIA_S5C73M3__
+#define MEDIA_S5C73M3__
+
+#include <linux/videodev2.h>
+#include <media/v4l2-mediabus.h>
+
+/**
+ * struct s5c73m3_gpio - data structure describing a GPIO
+ * @gpio:  GPIO number
+ * @level: indicates active state of the @gpio
+ */
+struct s5c73m3_gpio {
+	int gpio;
+	int level;
+};
+
+/**
+ * struct s5c73m3_platform_data - s5c73m3 driver platform data
+ * @mclk_frequency: sensor's master clock frequency in Hz
+ * @gpio_reset:  GPIO driving RESET pin
+ * @gpio_stby:   GPIO driving STBY pin
+ * @nlanes:      maximum number of MIPI-CSI lanes used
+ * @horiz_flip:  default horizontal image flip value, non zero to enable
+ * @vert_flip:   default vertical image flip value, non zero to enable
+ */
+
+struct s5c73m3_platform_data {
+	unsigned long mclk_frequency;
+
+	struct s5c73m3_gpio gpio_reset;
+	struct s5c73m3_gpio gpio_stby;
+
+	enum v4l2_mbus_type bus_type;
+	u8 nlanes;
+	u8 horiz_flip;
+	u8 vert_flip;
+};
+
+#endif /* MEDIA_S5C73M3__ */
diff --git a/include/media/i2c/s5k4ecgx.h b/include/media/i2c/s5k4ecgx.h
new file mode 100644
index 000000000..fccb7be8e
--- /dev/null
+++ b/include/media/i2c/s5k4ecgx.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * S5K4ECGX image sensor header file
+ *
+ * Copyright (C) 2012, Linaro
+ * Copyright (C) 2012, Samsung Electronics Co., Ltd.
+ */
+
+#ifndef S5K4ECGX_H
+#define S5K4ECGX_H
+
+/**
+ * struct s5k4ecgx_gpio - data structure describing a GPIO
+ * @gpio : GPIO number
+ * @level: indicates active state of the @gpio
+ */
+struct s5k4ecgx_gpio {
+	int gpio;
+	int level;
+};
+
+/**
+ * struct ss5k4ecgx_platform_data- s5k4ecgx driver platform data
+ * @gpio_reset:	 GPIO driving RESET pin
+ * @gpio_stby :	 GPIO driving STBY pin
+ */
+
+struct s5k4ecgx_platform_data {
+	struct s5k4ecgx_gpio gpio_reset;
+	struct s5k4ecgx_gpio gpio_stby;
+};
+
+#endif /* S5K4ECGX_H */
diff --git a/include/media/i2c/s5k6aa.h b/include/media/i2c/s5k6aa.h
new file mode 100644
index 000000000..fd78e85e8
--- /dev/null
+++ b/include/media/i2c/s5k6aa.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * S5K6AAFX camera sensor driver header
+ *
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ */
+
+#ifndef S5K6AA_H
+#define S5K6AA_H
+
+#include <media/v4l2-mediabus.h>
+
+/**
+ * struct s5k6aa_gpio - data structure describing a GPIO
+ * @gpio:  GPIO number
+ * @level: indicates active state of the @gpio
+ */
+struct s5k6aa_gpio {
+	int gpio;
+	int level;
+};
+
+/**
+ * struct s5k6aa_platform_data - s5k6aa driver platform data
+ * @set_power:   an additional callback to the board code, called
+ *               after enabling the regulators and before switching
+ *               the sensor off
+ * @mclk_frequency: sensor's master clock frequency in Hz
+ * @gpio_reset:  GPIO driving RESET pin
+ * @gpio_stby:   GPIO driving STBY pin
+ * @nlanes:      maximum number of MIPI-CSI lanes used
+ * @horiz_flip:  default horizontal image flip value, non zero to enable
+ * @vert_flip:   default vertical image flip value, non zero to enable
+ */
+
+struct s5k6aa_platform_data {
+	int (*set_power)(int enable);
+	unsigned long mclk_frequency;
+	struct s5k6aa_gpio gpio_reset;
+	struct s5k6aa_gpio gpio_stby;
+	enum v4l2_mbus_type bus_type;
+	u8 nlanes;
+	u8 horiz_flip;
+	u8 vert_flip;
+};
+
+#endif /* S5K6AA_H */
diff --git a/include/media/i2c/saa6588.h b/include/media/i2c/saa6588.h
new file mode 100644
index 000000000..bbec05a31
--- /dev/null
+++ b/include/media/i2c/saa6588.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+
+    Types and defines needed for RDS. This is included by
+    saa6588.c and every driver (e.g. bttv-driver.c) that wants
+    to use the saa6588 module.
+
+    (c) 2005 by Hans J. Koch
+
+
+*/
+
+#ifndef _SAA6588_H
+#define _SAA6588_H
+
+struct saa6588_command {
+	unsigned int  block_count;
+	bool          nonblocking;
+	int           result;
+	unsigned char __user *buffer;
+	struct file   *instance;
+	poll_table    *event_list;
+	__poll_t      poll_mask;
+};
+
+/* These ioctls are internal to the kernel */
+#define SAA6588_CMD_CLOSE	_IOW('R', 2, int)
+#define SAA6588_CMD_READ	_IOR('R', 3, int)
+#define SAA6588_CMD_POLL	_IOR('R', 4, int)
+
+#endif
diff --git a/include/media/i2c/saa7115.h b/include/media/i2c/saa7115.h
new file mode 100644
index 000000000..0cd6080d7
--- /dev/null
+++ b/include/media/i2c/saa7115.h
@@ -0,0 +1,128 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+    saa7115.h - definition for saa7111/3/4/5 inputs and frequency flags
+
+    Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl)
+
+*/
+
+#ifndef _SAA7115_H_
+#define _SAA7115_H_
+
+/* s_routing inputs, outputs, and config */
+
+/* SAA7111/3/4/5 HW inputs */
+#define SAA7115_COMPOSITE0 0
+#define SAA7115_COMPOSITE1 1
+#define SAA7115_COMPOSITE2 2
+#define SAA7115_COMPOSITE3 3
+#define SAA7115_COMPOSITE4 4 /* not available for the saa7111/3 */
+#define SAA7115_COMPOSITE5 5 /* not available for the saa7111/3 */
+#define SAA7115_SVIDEO0    6
+#define SAA7115_SVIDEO1    7
+#define SAA7115_SVIDEO2    8
+#define SAA7115_SVIDEO3    9
+
+/* outputs */
+#define SAA7115_IPORT_ON	1
+#define SAA7115_IPORT_OFF	0
+
+/* SAA7111 specific outputs. */
+#define SAA7111_VBI_BYPASS	2
+#define SAA7111_FMT_YUV422      0x00
+#define SAA7111_FMT_RGB		0x40
+#define SAA7111_FMT_CCIR	0x80
+#define SAA7111_FMT_YUV411	0xc0
+
+/* config flags */
+/*
+ * Register 0x85 should set bit 0 to 0 (it's 1 by default). This bit
+ * controls the IDQ signal polarity which is set to 'inverted' if the bit
+ * it 1 and to 'default' if it is 0.
+ */
+#define SAA7115_IDQ_IS_DEFAULT  (1 << 0)
+
+/* s_crystal_freq values and flags */
+
+/* SAA7115 v4l2_crystal_freq frequency values */
+#define SAA7115_FREQ_32_11_MHZ  32110000   /* 32.11 MHz crystal, SAA7114/5 only */
+#define SAA7115_FREQ_24_576_MHZ 24576000   /* 24.576 MHz crystal */
+
+/* SAA7115 v4l2_crystal_freq audio clock control flags */
+#define SAA7115_FREQ_FL_UCGC         (1 << 0) /* SA 3A[7], UCGC, SAA7115 only */
+#define SAA7115_FREQ_FL_CGCDIV       (1 << 1) /* SA 3A[6], CGCDIV, SAA7115 only */
+#define SAA7115_FREQ_FL_APLL         (1 << 2) /* SA 3A[3], APLL, SAA7114/5 only */
+#define SAA7115_FREQ_FL_DOUBLE_ASCLK (1 << 3) /* SA 39, LRDIV, SAA7114/5 only */
+
+/* ===== SAA7113 Config enums ===== */
+
+/* Register 0x08 "Horizontal time constant" [Bit 3..4]:
+ * Should be set to "Fast Locking Mode" according to the datasheet,
+ * and that is the default setting in the gm7113c_init table.
+ * saa7113_init sets this value to "VTR Mode". */
+enum saa7113_r08_htc {
+	SAA7113_HTC_TV_MODE = 0x00,
+	SAA7113_HTC_VTR_MODE,			/* Default for saa7113_init */
+	SAA7113_HTC_FAST_LOCKING_MODE = 0x03	/* Default for gm7113c_init */
+};
+
+/* Register 0x10 "Output format selection" [Bit 6..7]:
+ * Defaults to ITU_656 as specified in datasheet. */
+enum saa7113_r10_ofts {
+	SAA7113_OFTS_ITU_656 = 0x0,	/* Default */
+	SAA7113_OFTS_VFLAG_BY_VREF,
+	SAA7113_OFTS_VFLAG_BY_DATA_TYPE
+};
+
+/*
+ * Register 0x12 "Output control" [Bit 0..3 Or Bit 4..7]:
+ * This is used to select what data is output on the RTS0 and RTS1 pins.
+ * RTS1 [Bit 4..7] Defaults to DOT_IN. (This value can not be set for RTS0)
+ * RTS0 [Bit 0..3] Defaults to VIPB in gm7113c_init as specified
+ * in the datasheet, but is set to HREF_HS in the saa7113_init table.
+ */
+enum saa7113_r12_rts {
+	SAA7113_RTS_DOT_IN = 0,		/* OBS: Only for RTS1 (Default RTS1) */
+	SAA7113_RTS_VIPB,		/* Default RTS0 For gm7113c_init */
+	SAA7113_RTS_GPSW,
+	SAA7115_RTS_HL,
+	SAA7113_RTS_VL,
+	SAA7113_RTS_DL,
+	SAA7113_RTS_PLIN,
+	SAA7113_RTS_HREF_HS,		/* Default RTS0 For saa7113_init */
+	SAA7113_RTS_HS,
+	SAA7113_RTS_HQ,
+	SAA7113_RTS_ODD,
+	SAA7113_RTS_VS,
+	SAA7113_RTS_V123,
+	SAA7113_RTS_VGATE,
+	SAA7113_RTS_VREF,
+	SAA7113_RTS_FID
+};
+
+/**
+ * struct saa7115_platform_data - Allow overriding default initialization
+ *
+ * @saa7113_force_gm7113c_init:	Force the use of the gm7113c_init table
+ *				instead of saa7113_init table
+ *				(saa7113 only)
+ * @saa7113_r08_htc:		[R_08 - Bit 3..4]
+ * @saa7113_r10_vrln:		[R_10 - Bit 3]
+ *				default: Disabled for gm7113c_init
+ *					 Enabled for saa7113c_init
+ * @saa7113_r10_ofts:		[R_10 - Bit 6..7]
+ * @saa7113_r12_rts0:		[R_12 - Bit 0..3]
+ * @saa7113_r12_rts1:		[R_12 - Bit 4..7]
+ * @saa7113_r13_adlsb:		[R_13 - Bit 7] - default: disabled
+ */
+struct saa7115_platform_data {
+	bool saa7113_force_gm7113c_init;
+	enum saa7113_r08_htc *saa7113_r08_htc;
+	bool *saa7113_r10_vrln;
+	enum saa7113_r10_ofts *saa7113_r10_ofts;
+	enum saa7113_r12_rts *saa7113_r12_rts0;
+	enum saa7113_r12_rts *saa7113_r12_rts1;
+	bool *saa7113_r13_adlsb;
+};
+
+#endif
diff --git a/include/media/i2c/saa7127.h b/include/media/i2c/saa7127.h
new file mode 100644
index 000000000..53ee999e6
--- /dev/null
+++ b/include/media/i2c/saa7127.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+    saa7127.h - definition for saa7126/7/8/9 inputs/outputs
+
+    Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl)
+
+*/
+
+#ifndef _SAA7127_H_
+#define _SAA7127_H_
+
+/* Enumeration for the supported input types */
+enum saa7127_input_type {
+	SAA7127_INPUT_TYPE_NORMAL,
+	SAA7127_INPUT_TYPE_TEST_IMAGE
+};
+
+/* Enumeration for the supported output signal types */
+enum saa7127_output_type {
+	SAA7127_OUTPUT_TYPE_BOTH,
+	SAA7127_OUTPUT_TYPE_COMPOSITE,
+	SAA7127_OUTPUT_TYPE_SVIDEO,
+	SAA7127_OUTPUT_TYPE_RGB,
+	SAA7127_OUTPUT_TYPE_YUV_C,
+	SAA7127_OUTPUT_TYPE_YUV_V
+};
+
+#endif
diff --git a/include/media/i2c/sr030pc30.h b/include/media/i2c/sr030pc30.h
new file mode 100644
index 000000000..84c602d68
--- /dev/null
+++ b/include/media/i2c/sr030pc30.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Driver header for SR030PC30 camera sensor
+ *
+ * Copyright (c) 2010 Samsung Electronics, Co. Ltd
+ * Contact: Sylwester Nawrocki <s.nawrocki@samsung.com>
+ */
+
+#ifndef SR030PC30_H
+#define SR030PC30_H
+
+struct sr030pc30_platform_data {
+	unsigned long clk_rate;	/* master clock frequency in Hz */
+	int (*set_power)(struct device *dev, int on);
+};
+
+#endif /* SR030PC30_H */
diff --git a/include/media/i2c/tc358743.h b/include/media/i2c/tc358743.h
new file mode 100644
index 000000000..b343650c2
--- /dev/null
+++ b/include/media/i2c/tc358743.h
@@ -0,0 +1,117 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * tc358743 - Toshiba HDMI to CSI-2 bridge
+ *
+ * Copyright 2015 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+/*
+ * References (c = chapter, p = page):
+ * REF_01 - Toshiba, TC358743XBG (H2C), Functional Specification, Rev 0.60
+ * REF_02 - Toshiba, TC358743XBG_HDMI-CSI_Tv11p_nm.xls
+ */
+
+#ifndef _TC358743_
+#define _TC358743_
+
+enum tc358743_ddc5v_delays {
+	DDC5V_DELAY_0_MS,
+	DDC5V_DELAY_50_MS,
+	DDC5V_DELAY_100_MS,
+	DDC5V_DELAY_200_MS,
+};
+
+enum tc358743_hdmi_detection_delay {
+	HDMI_MODE_DELAY_0_MS,
+	HDMI_MODE_DELAY_25_MS,
+	HDMI_MODE_DELAY_50_MS,
+	HDMI_MODE_DELAY_100_MS,
+};
+
+struct tc358743_platform_data {
+	/* System clock connected to REFCLK (pin H5) */
+	u32 refclk_hz; /* 26 MHz, 27 MHz or 42 MHz */
+
+	/* DDC +5V debounce delay to avoid spurious interrupts when the cable
+	 * is connected.
+	 * Sets DDC5V_MODE in register DDC_CTL.
+	 * Default: DDC5V_DELAY_0_MS
+	 */
+	enum tc358743_ddc5v_delays ddc5v_delay;
+
+	bool enable_hdcp;
+
+	/*
+	 * The FIFO size is 512x32, so Toshiba recommend to set the default FIFO
+	 * level to somewhere in the middle (e.g. 300), so it can cover speed
+	 * mismatches in input and output ports.
+	 */
+	u16 fifo_level;
+
+	/* Bps pr lane is (refclk_hz / pll_prd) * pll_fbd */
+	u16 pll_prd;
+	u16 pll_fbd;
+
+	/* CSI
+	 * Calculate CSI parameters with REF_02 for the highest resolution your
+	 * CSI interface can handle. The driver will adjust the number of CSI
+	 * lanes in use according to the pixel clock.
+	 *
+	 * The values in brackets are calculated with REF_02 when the number of
+	 * bps pr lane is 823.5 MHz, and can serve as a starting point.
+	 */
+	u32 lineinitcnt;	/* (0x00001770) */
+	u32 lptxtimecnt;	/* (0x00000005) */
+	u32 tclk_headercnt;	/* (0x00001d04) */
+	u32 tclk_trailcnt;	/* (0x00000000) */
+	u32 ths_headercnt;	/* (0x00000505) */
+	u32 twakeup;		/* (0x00004650) */
+	u32 tclk_postcnt;	/* (0x00000000) */
+	u32 ths_trailcnt;	/* (0x00000004) */
+	u32 hstxvregcnt;	/* (0x00000005) */
+
+	/* DVI->HDMI detection delay to avoid unnecessary switching between DVI
+	 * and HDMI mode.
+	 * Sets HDMI_DET_V in register HDMI_DET.
+	 * Default: HDMI_MODE_DELAY_0_MS
+	 */
+	enum tc358743_hdmi_detection_delay hdmi_detection_delay;
+
+	/* Reset PHY automatically when TMDS clock goes from DC to AC.
+	 * Sets PHY_AUTO_RST2 in register PHY_CTL2.
+	 * Default: false
+	 */
+	bool hdmi_phy_auto_reset_tmds_detected;
+
+	/* Reset PHY automatically when TMDS clock passes 21 MHz.
+	 * Sets PHY_AUTO_RST3 in register PHY_CTL2.
+	 * Default: false
+	 */
+	bool hdmi_phy_auto_reset_tmds_in_range;
+
+	/* Reset PHY automatically when TMDS clock is detected.
+	 * Sets PHY_AUTO_RST4 in register PHY_CTL2.
+	 * Default: false
+	 */
+	bool hdmi_phy_auto_reset_tmds_valid;
+
+	/* Reset HDMI PHY automatically when hsync period is out of range.
+	 * Sets H_PI_RST in register HV_RST.
+	 * Default: false
+	 */
+	bool hdmi_phy_auto_reset_hsync_out_of_range;
+
+	/* Reset HDMI PHY automatically when vsync period is out of range.
+	 * Sets V_PI_RST in register HV_RST.
+	 * Default: false
+	 */
+	bool hdmi_phy_auto_reset_vsync_out_of_range;
+};
+
+/* custom controls */
+/* Audio sample rate in Hz */
+#define TC358743_CID_AUDIO_SAMPLING_RATE (V4L2_CID_USER_TC358743_BASE + 0)
+/* Audio present status */
+#define TC358743_CID_AUDIO_PRESENT       (V4L2_CID_USER_TC358743_BASE + 1)
+
+#endif
diff --git a/include/media/i2c/tda1997x.h b/include/media/i2c/tda1997x.h
new file mode 100644
index 000000000..c6c2a8ae4
--- /dev/null
+++ b/include/media/i2c/tda1997x.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * tda1997x - NXP HDMI receiver
+ *
+ * Copyright 2017 Tim Harvey <tharvey@gateworks.com>
+ *
+ */
+
+#ifndef _TDA1997X_
+#define _TDA1997X_
+
+/* Platform Data */
+struct tda1997x_platform_data {
+	enum v4l2_mbus_type vidout_bus_type;
+	u32 vidout_bus_width;
+	u8 vidout_port_cfg[9];
+	/* pin polarity (1=invert) */
+	bool vidout_inv_de;
+	bool vidout_inv_hs;
+	bool vidout_inv_vs;
+	bool vidout_inv_pclk;
+	/* clock delays (0=-8, 1=-7 ... 15=+7 pixels) */
+	u8 vidout_delay_hs;
+	u8 vidout_delay_vs;
+	u8 vidout_delay_de;
+	u8 vidout_delay_pclk;
+	/* sync selections (controls how sync pins are derived) */
+	u8 vidout_sel_hs;
+	u8 vidout_sel_vs;
+	u8 vidout_sel_de;
+
+	/* Audio Port Output */
+	int audout_format;
+	u32 audout_mclk_fs;	/* clock multiplier */
+	u32 audout_width;	/* 13 or 32 bit */
+	u32 audout_layout;	/* layout0=AP0 layout1=AP0,AP1,AP2,AP3 */
+	bool audout_layoutauto;	/* audio layout dictated by pkt header */
+	bool audout_invert_clk;	/* data valid on rising edge of BCLK */
+	bool audio_auto_mute;	/* enable hardware audio auto-mute */
+};
+
+#endif
diff --git a/include/media/i2c/ths7303.h b/include/media/i2c/ths7303.h
new file mode 100644
index 000000000..95492d127
--- /dev/null
+++ b/include/media/i2c/ths7303.h
@@ -0,0 +1,28 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2013 Texas Instruments Inc
+ *
+ * Copyright 2013 Cisco Systems, Inc. and/or its affiliates.
+ *
+ * Contributors:
+ *     Hans Verkuil <hans.verkuil@cisco.com>
+ *     Lad, Prabhakar <prabhakar.lad@ti.com>
+ *     Martin Bugge <marbugge@cisco.com>
+ */
+
+#ifndef THS7353_H
+#define THS7353_H
+
+/**
+ * struct ths7303_platform_data - Platform dependent data
+ * @ch_1: Bias value for channel one.
+ * @ch_2: Bias value for channel two.
+ * @ch_3: Bias value for channel three.
+ */
+struct ths7303_platform_data {
+	u8 ch_1;
+	u8 ch_2;
+	u8 ch_3;
+};
+
+#endif
diff --git a/include/media/i2c/tvaudio.h b/include/media/i2c/tvaudio.h
new file mode 100644
index 000000000..42cd3206f
--- /dev/null
+++ b/include/media/i2c/tvaudio.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+    tvaudio.h - definition for tvaudio inputs
+
+    Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl)
+
+*/
+
+#ifndef _TVAUDIO_H
+#define _TVAUDIO_H
+
+/*
+ * i2c bus addresses for the chips supported by tvaudio.c
+ */
+
+#define I2C_ADDR_TDA8425	0x82
+#define I2C_ADDR_TDA9840	0x84
+#define I2C_ADDR_TDA9874	0xb0 /* also used by 9875 */
+#define I2C_ADDR_TDA9875	0xb0
+#define I2C_ADDR_TDA8425	0x82
+#define I2C_ADDR_TDA9840	0x84 /* also used by TA8874Z */
+#define I2C_ADDR_TDA985x_L	0xb4 /* also used by 9873 */
+#define I2C_ADDR_TDA985x_H	0xb6
+#define I2C_ADDR_TDA9874	0xb0 /* also used by 9875 */
+#define I2C_ADDR_TEA6300	0x80 /* also used by 6320 */
+#define I2C_ADDR_TEA6420	0x98
+#define I2C_ADDR_PIC16C54	0x96 /* PV951 */
+
+/* The tvaudio module accepts the following inputs: */
+#define TVAUDIO_INPUT_TUNER  0
+#define TVAUDIO_INPUT_RADIO  1
+#define TVAUDIO_INPUT_EXTERN 2
+#define TVAUDIO_INPUT_INTERN 3
+
+static inline const unsigned short *tvaudio_addrs(void)
+{
+	static const unsigned short addrs[] = {
+		I2C_ADDR_TDA8425   >> 1,
+		I2C_ADDR_TEA6300   >> 1,
+		I2C_ADDR_TEA6420   >> 1,
+		I2C_ADDR_TDA9840   >> 1,
+		I2C_ADDR_TDA985x_L >> 1,
+		I2C_ADDR_TDA985x_H >> 1,
+		I2C_ADDR_TDA9874   >> 1,
+		I2C_ADDR_PIC16C54  >> 1,
+		I2C_CLIENT_END
+	};
+
+	return addrs;
+}
+
+#endif
diff --git a/include/media/i2c/tvp514x.h b/include/media/i2c/tvp514x.h
new file mode 100644
index 000000000..0c1bb04bd
--- /dev/null
+++ b/include/media/i2c/tvp514x.h
@@ -0,0 +1,98 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * drivers/media/video/tvp514x.h
+ *
+ * Copyright (C) 2008 Texas Instruments Inc
+ * Author: Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * Contributors:
+ *     Sivaraj R <sivaraj@ti.com>
+ *     Brijesh R Jadav <brijesh.j@ti.com>
+ *     Hardik Shah <hardik.shah@ti.com>
+ *     Manjunath Hadli <mrh@ti.com>
+ *     Karicheri Muralidharan <m-karicheri2@ti.com>
+ */
+
+#ifndef _TVP514X_H
+#define _TVP514X_H
+
+/*
+ * Other macros
+ */
+#define TVP514X_MODULE_NAME		"tvp514x"
+
+#define TVP514X_XCLK_BT656		(27000000)
+
+/* Number of pixels and number of lines per frame for different standards */
+#define NTSC_NUM_ACTIVE_PIXELS		(720)
+#define NTSC_NUM_ACTIVE_LINES		(480)
+#define PAL_NUM_ACTIVE_PIXELS		(720)
+#define PAL_NUM_ACTIVE_LINES		(576)
+
+/**
+ * enum tvp514x_input - enum for different decoder input pin
+ *		configuration.
+ */
+enum tvp514x_input {
+	/*
+	 * CVBS input selection
+	 */
+	INPUT_CVBS_VI1A = 0x0,
+	INPUT_CVBS_VI1B,
+	INPUT_CVBS_VI1C,
+	INPUT_CVBS_VI2A = 0x04,
+	INPUT_CVBS_VI2B,
+	INPUT_CVBS_VI2C,
+	INPUT_CVBS_VI3A = 0x08,
+	INPUT_CVBS_VI3B,
+	INPUT_CVBS_VI3C,
+	INPUT_CVBS_VI4A = 0x0C,
+	/*
+	 * S-Video input selection
+	 */
+	INPUT_SVIDEO_VI2A_VI1A = 0x44,
+	INPUT_SVIDEO_VI2B_VI1B,
+	INPUT_SVIDEO_VI2C_VI1C,
+	INPUT_SVIDEO_VI2A_VI3A = 0x54,
+	INPUT_SVIDEO_VI2B_VI3B,
+	INPUT_SVIDEO_VI2C_VI3C,
+	INPUT_SVIDEO_VI4A_VI1A = 0x4C,
+	INPUT_SVIDEO_VI4A_VI1B,
+	INPUT_SVIDEO_VI4A_VI1C,
+	INPUT_SVIDEO_VI4A_VI3A = 0x5C,
+	INPUT_SVIDEO_VI4A_VI3B,
+	INPUT_SVIDEO_VI4A_VI3C,
+
+	/* Need to add entries for
+	 * RGB, YPbPr and SCART.
+	 */
+	INPUT_INVALID
+};
+
+/**
+ * enum tvp514x_output - enum for output format
+ *			supported.
+ *
+ */
+enum tvp514x_output {
+	OUTPUT_10BIT_422_EMBEDDED_SYNC = 0,
+	OUTPUT_20BIT_422_SEPERATE_SYNC,
+	OUTPUT_10BIT_422_SEPERATE_SYNC = 3,
+	OUTPUT_INVALID
+};
+
+/**
+ * struct tvp514x_platform_data - Platform data values and access functions.
+ * @clk_polarity: Clock polarity of the current interface.
+ * @hs_polarity: HSYNC Polarity configuration for current interface.
+ * @vs_polarity: VSYNC Polarity configuration for current interface.
+ */
+struct tvp514x_platform_data {
+	/* Interface control params */
+	bool clk_polarity;
+	bool hs_polarity;
+	bool vs_polarity;
+};
+
+
+#endif				/* ifndef _TVP514X_H */
diff --git a/include/media/i2c/tvp7002.h b/include/media/i2c/tvp7002.h
new file mode 100644
index 000000000..c31eb0040
--- /dev/null
+++ b/include/media/i2c/tvp7002.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* Texas Instruments Triple 8-/10-BIT 165-/110-MSPS Video and Graphics
+ * Digitizer with Horizontal PLL registers
+ *
+ * Copyright (C) 2009 Texas Instruments Inc
+ * Author: Santiago Nunez-Corrales <santiago.nunez@ridgerun.com>
+ *
+ * This code is partially based upon the TVP5150 driver
+ * written by Mauro Carvalho Chehab <mchehab@kernel.org>,
+ * the TVP514x driver written by Vaibhav Hiremath <hvaibhav@ti.com>
+ * and the TVP7002 driver in the TI LSP 2.10.00.14
+ */
+#ifndef _TVP7002_H_
+#define _TVP7002_H_
+
+#define TVP7002_MODULE_NAME "tvp7002"
+
+/**
+ * struct tvp7002_config - Platform dependent data
+ *@clk_polarity: Clock polarity
+ *		0 - Data clocked out on rising edge of DATACLK signal
+ *		1 - Data clocked out on falling edge of DATACLK signal
+ *@hs_polarity:  HSYNC polarity
+ *		0 - Active low HSYNC output, 1 - Active high HSYNC output
+ *@vs_polarity: VSYNC Polarity
+ *		0 - Active low VSYNC output, 1 - Active high VSYNC output
+ *@fid_polarity: Active-high Field ID polarity.
+ *		0 - The field ID output is set to logic 1 for an odd field
+ *		    (field 1) and set to logic 0 for an even field (field 0).
+ *		1 - Operation with polarity inverted.
+ *@sog_polarity: Active high Sync on Green output polarity.
+ *		0 - Normal operation, 1 - Operation with polarity inverted
+ */
+struct tvp7002_config {
+	bool clk_polarity;
+	bool hs_polarity;
+	bool vs_polarity;
+	bool fid_polarity;
+	bool sog_polarity;
+};
+#endif
diff --git a/include/media/i2c/tw9910.h b/include/media/i2c/tw9910.h
new file mode 100644
index 000000000..92d31bd1a
--- /dev/null
+++ b/include/media/i2c/tw9910.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * tw9910 Driver header
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on ov772x.h
+ *
+ * Copyright (C) Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ */
+
+#ifndef __TW9910_H__
+#define __TW9910_H__
+
+/**
+ * tw9910_mpout_pin - MPOUT (multi-purpose output) pin functions
+ */
+enum tw9910_mpout_pin {
+	TW9910_MPO_VLOSS,
+	TW9910_MPO_HLOCK,
+	TW9910_MPO_SLOCK,
+	TW9910_MPO_VLOCK,
+	TW9910_MPO_MONO,
+	TW9910_MPO_DET50,
+	TW9910_MPO_FIELD,
+	TW9910_MPO_RTCO,
+};
+
+/**
+ * tw9910_video_info -	tw9910 driver interface structure
+ * @buswidth:		Parallel data bus width (8 or 16).
+ * @mpout:		Selected function of MPOUT (multi-purpose output) pin.
+ *			See &enum tw9910_mpout_pin
+ */
+struct tw9910_video_info {
+	unsigned long		buswidth;
+	enum tw9910_mpout_pin	mpout;
+};
+
+
+#endif /* __TW9910_H__ */
diff --git a/include/media/i2c/uda1342.h b/include/media/i2c/uda1342.h
new file mode 100644
index 000000000..cb412d4c1
--- /dev/null
+++ b/include/media/i2c/uda1342.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * uda1342.h - definition for uda1342 inputs
+ *
+ * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
+ */
+
+#ifndef _UDA1342_H_
+#define _UDA1342_H_
+
+/* The UDA1342 has 2 inputs */
+
+#define UDA1342_IN1 1
+#define UDA1342_IN2 2
+
+#endif
diff --git a/include/media/i2c/upd64031a.h b/include/media/i2c/upd64031a.h
new file mode 100644
index 000000000..b6570abc8
--- /dev/null
+++ b/include/media/i2c/upd64031a.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * upd64031a - NEC Electronics Ghost Reduction input defines
+ *
+ * 2006 by Hans Verkuil (hverkuil@xs4all.nl)
+ */
+
+#ifndef _UPD64031A_H_
+#define _UPD64031A_H_
+
+/* Ghost reduction modes */
+#define UPD64031A_GR_ON		0
+#define UPD64031A_GR_OFF	1
+#define UPD64031A_GR_THROUGH	3
+
+/* Direct 3D/YCS Connection */
+#define UPD64031A_3DYCS_DISABLE   (0 << 2)
+#define UPD64031A_3DYCS_COMPOSITE (2 << 2)
+#define UPD64031A_3DYCS_SVIDEO    (3 << 2)
+
+/* Composite sync digital separation circuit */
+#define UPD64031A_COMPOSITE_EXTERNAL (1 << 4)
+
+/* Vertical sync digital separation circuit */
+#define UPD64031A_VERTICAL_EXTERNAL (1 << 5)
+
+#endif
diff --git a/include/media/i2c/upd64083.h b/include/media/i2c/upd64083.h
new file mode 100644
index 000000000..17fb7b520
--- /dev/null
+++ b/include/media/i2c/upd64083.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * upd6408x - NEC Electronics 3-Dimensional Y/C separation input defines
+ *
+ * 2006 by Hans Verkuil (hverkuil@xs4all.nl)
+ */
+
+#ifndef _UPD64083_H_
+#define _UPD64083_H_
+
+/* There are two bits of information that the driver needs in order
+   to select the correct routing: the operating mode and the selection
+   of the Y input (external or internal).
+
+   The first two operating modes expect a composite signal on the Y input,
+   the second two operating modes use both the Y and C inputs.
+
+   Normally YCS_MODE is used for tuner and composite inputs, and the
+   YCNR mode is used for S-Video inputs.
+
+   The external Y-ADC is selected when the composite input comes from a
+   upd64031a ghost reduction device. If this device is not present, or
+   the input is a S-Video signal, then the internal Y-ADC input should
+   be used. */
+
+/* Operating modes: */
+
+/* YCS mode: Y/C separation (burst locked clocking) */
+#define UPD64083_YCS_MODE      0
+/* YCS+ mode: 2D Y/C separation and YCNR (burst locked clocking) */
+#define UPD64083_YCS_PLUS_MODE 1
+
+/* Note: the following two modes cannot be used in combination with the
+   external Y-ADC. */
+/* MNNR mode: frame comb type YNR+C delay (line locked clocking) */
+#define UPD64083_MNNR_MODE     2
+/* YCNR mode: frame recursive YCNR (burst locked clocking) */
+#define UPD64083_YCNR_MODE     3
+
+/* Select external Y-ADC: this should be set if this device is used in
+   combination with the upd64031a ghost reduction device.
+   Otherwise leave at 0 (use internal Y-ADC). */
+#define UPD64083_EXT_Y_ADC     (1 << 2)
+
+#endif
diff --git a/include/media/i2c/wm8775.h b/include/media/i2c/wm8775.h
new file mode 100644
index 000000000..836758176
--- /dev/null
+++ b/include/media/i2c/wm8775.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+    wm8775.h - definition for wm8775 inputs and outputs
+
+    Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl)
+
+*/
+
+#ifndef _WM8775_H_
+#define _WM8775_H_
+
+/* The WM8775 has 4 inputs and one output. Zero or more inputs
+   are multiplexed together to the output. Hence there are
+   16 combinations.
+   If only one input is active (the normal case) then the
+   input values 1, 2, 4 or 8 should be used. */
+
+#define WM8775_AIN1 1
+#define WM8775_AIN2 2
+#define WM8775_AIN3 4
+#define WM8775_AIN4 8
+
+
+struct wm8775_platform_data {
+	/*
+	 * FIXME: Instead, we should parametrize the params
+	 * that need different settings between ivtv, pvrusb2, and Nova-S
+	 */
+	bool is_nova_s;
+};
+
+#endif