Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1002 insertions, 0 deletions

diff --git a/include/uapi/misc/habanalabs.h b/include/uapi/misc/habanalabs.h
new file mode 100644
index 000000000..9705b8adb
--- /dev/null
+++ b/include/uapi/misc/habanalabs.h
@@ -0,0 +1,1002 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note
+ *
+ * Copyright 2016-2020 HabanaLabs, Ltd.
+ * All Rights Reserved.
+ *
+ */
+
+#ifndef HABANALABS_H_
+#define HABANALABS_H_
+
+#include <linux/types.h>
+#include <linux/ioctl.h>
+
+/*
+ * Defines that are asic-specific but constitutes as ABI between kernel driver
+ * and userspace
+ */
+#define GOYA_KMD_SRAM_RESERVED_SIZE_FROM_START		0x8000	/* 32KB */
+#define GAUDI_DRIVER_SRAM_RESERVED_SIZE_FROM_START	0x80	/* 128 bytes */
+
+#define GAUDI_FIRST_AVAILABLE_W_S_SYNC_OBJECT		48
+#define GAUDI_FIRST_AVAILABLE_W_S_MONITOR		24
+/*
+ * Goya queue Numbering
+ *
+ * The external queues (PCI DMA channels) MUST be before the internal queues
+ * and each group (PCI DMA channels and internal) must be contiguous inside
+ * itself but there can be a gap between the two groups (although not
+ * recommended)
+ */
+
+enum goya_queue_id {
+	GOYA_QUEUE_ID_DMA_0 = 0,
+	GOYA_QUEUE_ID_DMA_1 = 1,
+	GOYA_QUEUE_ID_DMA_2 = 2,
+	GOYA_QUEUE_ID_DMA_3 = 3,
+	GOYA_QUEUE_ID_DMA_4 = 4,
+	GOYA_QUEUE_ID_CPU_PQ = 5,
+	GOYA_QUEUE_ID_MME = 6,	/* Internal queues start here */
+	GOYA_QUEUE_ID_TPC0 = 7,
+	GOYA_QUEUE_ID_TPC1 = 8,
+	GOYA_QUEUE_ID_TPC2 = 9,
+	GOYA_QUEUE_ID_TPC3 = 10,
+	GOYA_QUEUE_ID_TPC4 = 11,
+	GOYA_QUEUE_ID_TPC5 = 12,
+	GOYA_QUEUE_ID_TPC6 = 13,
+	GOYA_QUEUE_ID_TPC7 = 14,
+	GOYA_QUEUE_ID_SIZE
+};
+
+/*
+ * Gaudi queue Numbering
+ * External queues (PCI DMA channels) are DMA_0_*, DMA_1_* and DMA_5_*.
+ * Except one CPU queue, all the rest are internal queues.
+ */
+
+enum gaudi_queue_id {
+	GAUDI_QUEUE_ID_DMA_0_0 = 0,	/* external */
+	GAUDI_QUEUE_ID_DMA_0_1 = 1,	/* external */
+	GAUDI_QUEUE_ID_DMA_0_2 = 2,	/* external */
+	GAUDI_QUEUE_ID_DMA_0_3 = 3,	/* external */
+	GAUDI_QUEUE_ID_DMA_1_0 = 4,	/* external */
+	GAUDI_QUEUE_ID_DMA_1_1 = 5,	/* external */
+	GAUDI_QUEUE_ID_DMA_1_2 = 6,	/* external */
+	GAUDI_QUEUE_ID_DMA_1_3 = 7,	/* external */
+	GAUDI_QUEUE_ID_CPU_PQ = 8,	/* CPU */
+	GAUDI_QUEUE_ID_DMA_2_0 = 9,	/* internal */
+	GAUDI_QUEUE_ID_DMA_2_1 = 10,	/* internal */
+	GAUDI_QUEUE_ID_DMA_2_2 = 11,	/* internal */
+	GAUDI_QUEUE_ID_DMA_2_3 = 12,	/* internal */
+	GAUDI_QUEUE_ID_DMA_3_0 = 13,	/* internal */
+	GAUDI_QUEUE_ID_DMA_3_1 = 14,	/* internal */
+	GAUDI_QUEUE_ID_DMA_3_2 = 15,	/* internal */
+	GAUDI_QUEUE_ID_DMA_3_3 = 16,	/* internal */
+	GAUDI_QUEUE_ID_DMA_4_0 = 17,	/* internal */
+	GAUDI_QUEUE_ID_DMA_4_1 = 18,	/* internal */
+	GAUDI_QUEUE_ID_DMA_4_2 = 19,	/* internal */
+	GAUDI_QUEUE_ID_DMA_4_3 = 20,	/* internal */
+	GAUDI_QUEUE_ID_DMA_5_0 = 21,	/* external */
+	GAUDI_QUEUE_ID_DMA_5_1 = 22,	/* external */
+	GAUDI_QUEUE_ID_DMA_5_2 = 23,	/* external */
+	GAUDI_QUEUE_ID_DMA_5_3 = 24,	/* external */
+	GAUDI_QUEUE_ID_DMA_6_0 = 25,	/* internal */
+	GAUDI_QUEUE_ID_DMA_6_1 = 26,	/* internal */
+	GAUDI_QUEUE_ID_DMA_6_2 = 27,	/* internal */
+	GAUDI_QUEUE_ID_DMA_6_3 = 28,	/* internal */
+	GAUDI_QUEUE_ID_DMA_7_0 = 29,	/* internal */
+	GAUDI_QUEUE_ID_DMA_7_1 = 30,	/* internal */
+	GAUDI_QUEUE_ID_DMA_7_2 = 31,	/* internal */
+	GAUDI_QUEUE_ID_DMA_7_3 = 32,	/* internal */
+	GAUDI_QUEUE_ID_MME_0_0 = 33,	/* internal */
+	GAUDI_QUEUE_ID_MME_0_1 = 34,	/* internal */
+	GAUDI_QUEUE_ID_MME_0_2 = 35,	/* internal */
+	GAUDI_QUEUE_ID_MME_0_3 = 36,	/* internal */
+	GAUDI_QUEUE_ID_MME_1_0 = 37,	/* internal */
+	GAUDI_QUEUE_ID_MME_1_1 = 38,	/* internal */
+	GAUDI_QUEUE_ID_MME_1_2 = 39,	/* internal */
+	GAUDI_QUEUE_ID_MME_1_3 = 40,	/* internal */
+	GAUDI_QUEUE_ID_TPC_0_0 = 41,	/* internal */
+	GAUDI_QUEUE_ID_TPC_0_1 = 42,	/* internal */
+	GAUDI_QUEUE_ID_TPC_0_2 = 43,	/* internal */
+	GAUDI_QUEUE_ID_TPC_0_3 = 44,	/* internal */
+	GAUDI_QUEUE_ID_TPC_1_0 = 45,	/* internal */
+	GAUDI_QUEUE_ID_TPC_1_1 = 46,	/* internal */
+	GAUDI_QUEUE_ID_TPC_1_2 = 47,	/* internal */
+	GAUDI_QUEUE_ID_TPC_1_3 = 48,	/* internal */
+	GAUDI_QUEUE_ID_TPC_2_0 = 49,	/* internal */
+	GAUDI_QUEUE_ID_TPC_2_1 = 50,	/* internal */
+	GAUDI_QUEUE_ID_TPC_2_2 = 51,	/* internal */
+	GAUDI_QUEUE_ID_TPC_2_3 = 52,	/* internal */
+	GAUDI_QUEUE_ID_TPC_3_0 = 53,	/* internal */
+	GAUDI_QUEUE_ID_TPC_3_1 = 54,	/* internal */
+	GAUDI_QUEUE_ID_TPC_3_2 = 55,	/* internal */
+	GAUDI_QUEUE_ID_TPC_3_3 = 56,	/* internal */
+	GAUDI_QUEUE_ID_TPC_4_0 = 57,	/* internal */
+	GAUDI_QUEUE_ID_TPC_4_1 = 58,	/* internal */
+	GAUDI_QUEUE_ID_TPC_4_2 = 59,	/* internal */
+	GAUDI_QUEUE_ID_TPC_4_3 = 60,	/* internal */
+	GAUDI_QUEUE_ID_TPC_5_0 = 61,	/* internal */
+	GAUDI_QUEUE_ID_TPC_5_1 = 62,	/* internal */
+	GAUDI_QUEUE_ID_TPC_5_2 = 63,	/* internal */
+	GAUDI_QUEUE_ID_TPC_5_3 = 64,	/* internal */
+	GAUDI_QUEUE_ID_TPC_6_0 = 65,	/* internal */
+	GAUDI_QUEUE_ID_TPC_6_1 = 66,	/* internal */
+	GAUDI_QUEUE_ID_TPC_6_2 = 67,	/* internal */
+	GAUDI_QUEUE_ID_TPC_6_3 = 68,	/* internal */
+	GAUDI_QUEUE_ID_TPC_7_0 = 69,	/* internal */
+	GAUDI_QUEUE_ID_TPC_7_1 = 70,	/* internal */
+	GAUDI_QUEUE_ID_TPC_7_2 = 71,	/* internal */
+	GAUDI_QUEUE_ID_TPC_7_3 = 72,	/* internal */
+	GAUDI_QUEUE_ID_NIC_0_0 = 73,	/* internal */
+	GAUDI_QUEUE_ID_NIC_0_1 = 74,	/* internal */
+	GAUDI_QUEUE_ID_NIC_0_2 = 75,	/* internal */
+	GAUDI_QUEUE_ID_NIC_0_3 = 76,	/* internal */
+	GAUDI_QUEUE_ID_NIC_1_0 = 77,	/* internal */
+	GAUDI_QUEUE_ID_NIC_1_1 = 78,	/* internal */
+	GAUDI_QUEUE_ID_NIC_1_2 = 79,	/* internal */
+	GAUDI_QUEUE_ID_NIC_1_3 = 80,	/* internal */
+	GAUDI_QUEUE_ID_NIC_2_0 = 81,	/* internal */
+	GAUDI_QUEUE_ID_NIC_2_1 = 82,	/* internal */
+	GAUDI_QUEUE_ID_NIC_2_2 = 83,	/* internal */
+	GAUDI_QUEUE_ID_NIC_2_3 = 84,	/* internal */
+	GAUDI_QUEUE_ID_NIC_3_0 = 85,	/* internal */
+	GAUDI_QUEUE_ID_NIC_3_1 = 86,	/* internal */
+	GAUDI_QUEUE_ID_NIC_3_2 = 87,	/* internal */
+	GAUDI_QUEUE_ID_NIC_3_3 = 88,	/* internal */
+	GAUDI_QUEUE_ID_NIC_4_0 = 89,	/* internal */
+	GAUDI_QUEUE_ID_NIC_4_1 = 90,	/* internal */
+	GAUDI_QUEUE_ID_NIC_4_2 = 91,	/* internal */
+	GAUDI_QUEUE_ID_NIC_4_3 = 92,	/* internal */
+	GAUDI_QUEUE_ID_NIC_5_0 = 93,	/* internal */
+	GAUDI_QUEUE_ID_NIC_5_1 = 94,	/* internal */
+	GAUDI_QUEUE_ID_NIC_5_2 = 95,	/* internal */
+	GAUDI_QUEUE_ID_NIC_5_3 = 96,	/* internal */
+	GAUDI_QUEUE_ID_NIC_6_0 = 97,	/* internal */
+	GAUDI_QUEUE_ID_NIC_6_1 = 98,	/* internal */
+	GAUDI_QUEUE_ID_NIC_6_2 = 99,	/* internal */
+	GAUDI_QUEUE_ID_NIC_6_3 = 100,	/* internal */
+	GAUDI_QUEUE_ID_NIC_7_0 = 101,	/* internal */
+	GAUDI_QUEUE_ID_NIC_7_1 = 102,	/* internal */
+	GAUDI_QUEUE_ID_NIC_7_2 = 103,	/* internal */
+	GAUDI_QUEUE_ID_NIC_7_3 = 104,	/* internal */
+	GAUDI_QUEUE_ID_NIC_8_0 = 105,	/* internal */
+	GAUDI_QUEUE_ID_NIC_8_1 = 106,	/* internal */
+	GAUDI_QUEUE_ID_NIC_8_2 = 107,	/* internal */
+	GAUDI_QUEUE_ID_NIC_8_3 = 108,	/* internal */
+	GAUDI_QUEUE_ID_NIC_9_0 = 109,	/* internal */
+	GAUDI_QUEUE_ID_NIC_9_1 = 110,	/* internal */
+	GAUDI_QUEUE_ID_NIC_9_2 = 111,	/* internal */
+	GAUDI_QUEUE_ID_NIC_9_3 = 112,	/* internal */
+	GAUDI_QUEUE_ID_SIZE
+};
+
+/*
+ * Engine Numbering
+ *
+ * Used in the "busy_engines_mask" field in `struct hl_info_hw_idle'
+ */
+
+enum goya_engine_id {
+	GOYA_ENGINE_ID_DMA_0 = 0,
+	GOYA_ENGINE_ID_DMA_1,
+	GOYA_ENGINE_ID_DMA_2,
+	GOYA_ENGINE_ID_DMA_3,
+	GOYA_ENGINE_ID_DMA_4,
+	GOYA_ENGINE_ID_MME_0,
+	GOYA_ENGINE_ID_TPC_0,
+	GOYA_ENGINE_ID_TPC_1,
+	GOYA_ENGINE_ID_TPC_2,
+	GOYA_ENGINE_ID_TPC_3,
+	GOYA_ENGINE_ID_TPC_4,
+	GOYA_ENGINE_ID_TPC_5,
+	GOYA_ENGINE_ID_TPC_6,
+	GOYA_ENGINE_ID_TPC_7,
+	GOYA_ENGINE_ID_SIZE
+};
+
+enum gaudi_engine_id {
+	GAUDI_ENGINE_ID_DMA_0 = 0,
+	GAUDI_ENGINE_ID_DMA_1,
+	GAUDI_ENGINE_ID_DMA_2,
+	GAUDI_ENGINE_ID_DMA_3,
+	GAUDI_ENGINE_ID_DMA_4,
+	GAUDI_ENGINE_ID_DMA_5,
+	GAUDI_ENGINE_ID_DMA_6,
+	GAUDI_ENGINE_ID_DMA_7,
+	GAUDI_ENGINE_ID_MME_0,
+	GAUDI_ENGINE_ID_MME_1,
+	GAUDI_ENGINE_ID_MME_2,
+	GAUDI_ENGINE_ID_MME_3,
+	GAUDI_ENGINE_ID_TPC_0,
+	GAUDI_ENGINE_ID_TPC_1,
+	GAUDI_ENGINE_ID_TPC_2,
+	GAUDI_ENGINE_ID_TPC_3,
+	GAUDI_ENGINE_ID_TPC_4,
+	GAUDI_ENGINE_ID_TPC_5,
+	GAUDI_ENGINE_ID_TPC_6,
+	GAUDI_ENGINE_ID_TPC_7,
+	GAUDI_ENGINE_ID_NIC_0,
+	GAUDI_ENGINE_ID_NIC_1,
+	GAUDI_ENGINE_ID_NIC_2,
+	GAUDI_ENGINE_ID_NIC_3,
+	GAUDI_ENGINE_ID_NIC_4,
+	GAUDI_ENGINE_ID_NIC_5,
+	GAUDI_ENGINE_ID_NIC_6,
+	GAUDI_ENGINE_ID_NIC_7,
+	GAUDI_ENGINE_ID_NIC_8,
+	GAUDI_ENGINE_ID_NIC_9,
+	GAUDI_ENGINE_ID_SIZE
+};
+
+enum hl_device_status {
+	HL_DEVICE_STATUS_OPERATIONAL,
+	HL_DEVICE_STATUS_IN_RESET,
+	HL_DEVICE_STATUS_MALFUNCTION
+};
+
+/* Opcode for management ioctl
+ *
+ * HW_IP_INFO            - Receive information about different IP blocks in the
+ *                         device.
+ * HL_INFO_HW_EVENTS     - Receive an array describing how many times each event
+ *                         occurred since the last hard reset.
+ * HL_INFO_DRAM_USAGE    - Retrieve the dram usage inside the device and of the
+ *                         specific context. This is relevant only for devices
+ *                         where the dram is managed by the kernel driver
+ * HL_INFO_HW_IDLE       - Retrieve information about the idle status of each
+ *                         internal engine.
+ * HL_INFO_DEVICE_STATUS - Retrieve the device's status. This opcode doesn't
+ *                         require an open context.
+ * HL_INFO_DEVICE_UTILIZATION  - Retrieve the total utilization of the device
+ *                               over the last period specified by the user.
+ *                               The period can be between 100ms to 1s, in
+ *                               resolution of 100ms. The return value is a
+ *                               percentage of the utilization rate.
+ * HL_INFO_HW_EVENTS_AGGREGATE - Receive an array describing how many times each
+ *                               event occurred since the driver was loaded.
+ * HL_INFO_CLK_RATE            - Retrieve the current and maximum clock rate
+ *                               of the device in MHz. The maximum clock rate is
+ *                               configurable via sysfs parameter
+ * HL_INFO_RESET_COUNT   - Retrieve the counts of the soft and hard reset
+ *                         operations performed on the device since the last
+ *                         time the driver was loaded.
+ * HL_INFO_TIME_SYNC     - Retrieve the device's time alongside the host's time
+ *                         for synchronization.
+ * HL_INFO_CS_COUNTERS   - Retrieve command submission counters
+ * HL_INFO_PCI_COUNTERS  - Retrieve PCI counters
+ * HL_INFO_CLK_THROTTLE_REASON - Retrieve clock throttling reason
+ * HL_INFO_SYNC_MANAGER  - Retrieve sync manager info per dcore
+ * HL_INFO_TOTAL_ENERGY  - Retrieve total energy consumption
+ */
+#define HL_INFO_HW_IP_INFO		0
+#define HL_INFO_HW_EVENTS		1
+#define HL_INFO_DRAM_USAGE		2
+#define HL_INFO_HW_IDLE			3
+#define HL_INFO_DEVICE_STATUS		4
+#define HL_INFO_DEVICE_UTILIZATION	6
+#define HL_INFO_HW_EVENTS_AGGREGATE	7
+#define HL_INFO_CLK_RATE		8
+#define HL_INFO_RESET_COUNT		9
+#define HL_INFO_TIME_SYNC		10
+#define HL_INFO_CS_COUNTERS		11
+#define HL_INFO_PCI_COUNTERS		12
+#define HL_INFO_CLK_THROTTLE_REASON	13
+#define HL_INFO_SYNC_MANAGER		14
+#define HL_INFO_TOTAL_ENERGY		15
+
+#define HL_INFO_VERSION_MAX_LEN	128
+#define HL_INFO_CARD_NAME_MAX_LEN	16
+
+struct hl_info_hw_ip_info {
+	__u64 sram_base_address;
+	__u64 dram_base_address;
+	__u64 dram_size;
+	__u32 sram_size;
+	__u32 num_of_events;
+	__u32 device_id; /* PCI Device ID */
+	__u32 module_id; /* For mezzanine cards in servers (From OCP spec.) */
+	__u32 reserved[2];
+	__u32 cpld_version;
+	__u32 psoc_pci_pll_nr;
+	__u32 psoc_pci_pll_nf;
+	__u32 psoc_pci_pll_od;
+	__u32 psoc_pci_pll_div_factor;
+	__u8 tpc_enabled_mask;
+	__u8 dram_enabled;
+	__u8 pad[2];
+	__u8 cpucp_version[HL_INFO_VERSION_MAX_LEN];
+	__u8 card_name[HL_INFO_CARD_NAME_MAX_LEN];
+};
+
+struct hl_info_dram_usage {
+	__u64 dram_free_mem;
+	__u64 ctx_dram_mem;
+};
+
+struct hl_info_hw_idle {
+	__u32 is_idle;
+	/*
+	 * Bitmask of busy engines.
+	 * Bits definition is according to `enum <chip>_enging_id'.
+	 */
+	__u32 busy_engines_mask;
+
+	/*
+	 * Extended Bitmask of busy engines.
+	 * Bits definition is according to `enum <chip>_enging_id'.
+	 */
+	__u64 busy_engines_mask_ext;
+};
+
+struct hl_info_device_status {
+	__u32 status;
+	__u32 pad;
+};
+
+struct hl_info_device_utilization {
+	__u32 utilization;
+	__u32 pad;
+};
+
+struct hl_info_clk_rate {
+	__u32 cur_clk_rate_mhz;
+	__u32 max_clk_rate_mhz;
+};
+
+struct hl_info_reset_count {
+	__u32 hard_reset_cnt;
+	__u32 soft_reset_cnt;
+};
+
+struct hl_info_time_sync {
+	__u64 device_time;
+	__u64 host_time;
+};
+
+/**
+ * struct hl_info_pci_counters - pci counters
+ * @rx_throughput: PCI rx throughput KBps
+ * @tx_throughput: PCI tx throughput KBps
+ * @replay_cnt: PCI replay counter
+ */
+struct hl_info_pci_counters {
+	__u64 rx_throughput;
+	__u64 tx_throughput;
+	__u64 replay_cnt;
+};
+
+#define HL_CLK_THROTTLE_POWER	0x1
+#define HL_CLK_THROTTLE_THERMAL	0x2
+
+/**
+ * struct hl_info_clk_throttle - clock throttling reason
+ * @clk_throttling_reason: each bit represents a clk throttling reason
+ */
+struct hl_info_clk_throttle {
+	__u32 clk_throttling_reason;
+};
+
+/**
+ * struct hl_info_energy - device energy information
+ * @total_energy_consumption: total device energy consumption
+ */
+struct hl_info_energy {
+	__u64 total_energy_consumption;
+};
+
+/**
+ * struct hl_info_sync_manager - sync manager information
+ * @first_available_sync_object: first available sob
+ * @first_available_monitor: first available monitor
+ */
+struct hl_info_sync_manager {
+	__u32 first_available_sync_object;
+	__u32 first_available_monitor;
+};
+
+/**
+ * struct hl_info_cs_counters - command submission counters
+ * @out_of_mem_drop_cnt: dropped due to memory allocation issue
+ * @parsing_drop_cnt: dropped due to error in packet parsing
+ * @queue_full_drop_cnt: dropped due to queue full
+ * @device_in_reset_drop_cnt: dropped due to device in reset
+ * @max_cs_in_flight_drop_cnt: dropped due to maximum CS in-flight
+ */
+struct hl_cs_counters {
+	__u64 out_of_mem_drop_cnt;
+	__u64 parsing_drop_cnt;
+	__u64 queue_full_drop_cnt;
+	__u64 device_in_reset_drop_cnt;
+	__u64 max_cs_in_flight_drop_cnt;
+};
+
+struct hl_info_cs_counters {
+	struct hl_cs_counters cs_counters;
+	struct hl_cs_counters ctx_cs_counters;
+};
+
+enum gaudi_dcores {
+	HL_GAUDI_WS_DCORE,
+	HL_GAUDI_WN_DCORE,
+	HL_GAUDI_EN_DCORE,
+	HL_GAUDI_ES_DCORE
+};
+
+struct hl_info_args {
+	/* Location of relevant struct in userspace */
+	__u64 return_pointer;
+	/*
+	 * The size of the return value. Just like "size" in "snprintf",
+	 * it limits how many bytes the kernel can write
+	 *
+	 * For hw_events array, the size should be
+	 * hl_info_hw_ip_info.num_of_events * sizeof(__u32)
+	 */
+	__u32 return_size;
+
+	/* HL_INFO_* */
+	__u32 op;
+
+	union {
+		/* Dcore id for which the information is relevant.
+		 * For Gaudi refer to 'enum gaudi_dcores'
+		 */
+		__u32 dcore_id;
+		/* Context ID - Currently not in use */
+		__u32 ctx_id;
+		/* Period value for utilization rate (100ms - 1000ms, in 100ms
+		 * resolution.
+		 */
+		__u32 period_ms;
+	};
+
+	__u32 pad;
+};
+
+/* Opcode to create a new command buffer */
+#define HL_CB_OP_CREATE		0
+/* Opcode to destroy previously created command buffer */
+#define HL_CB_OP_DESTROY	1
+
+/* 2MB minus 32 bytes for 2xMSG_PROT */
+#define HL_MAX_CB_SIZE		(0x200000 - 32)
+
+/* Indicates whether the command buffer should be mapped to the device's MMU */
+#define HL_CB_FLAGS_MAP		0x1
+
+struct hl_cb_in {
+	/* Handle of CB or 0 if we want to create one */
+	__u64 cb_handle;
+	/* HL_CB_OP_* */
+	__u32 op;
+	/* Size of CB. Maximum size is HL_MAX_CB_SIZE. The minimum size that
+	 * will be allocated, regardless of this parameter's value, is PAGE_SIZE
+	 */
+	__u32 cb_size;
+	/* Context ID - Currently not in use */
+	__u32 ctx_id;
+	/* HL_CB_FLAGS_* */
+	__u32 flags;
+};
+
+struct hl_cb_out {
+	/* Handle of CB */
+	__u64 cb_handle;
+};
+
+union hl_cb_args {
+	struct hl_cb_in in;
+	struct hl_cb_out out;
+};
+
+/*
+ * This structure size must always be fixed to 64-bytes for backward
+ * compatibility
+ */
+struct hl_cs_chunk {
+	union {
+		/* For external queue, this represents a Handle of CB on the
+		 * Host.
+		 * For internal queue in Goya, this represents an SRAM or
+		 * a DRAM address of the internal CB. In Gaudi, this might also
+		 * represent a mapped host address of the CB.
+		 *
+		 * A mapped host address is in the device address space, after
+		 * a host address was mapped by the device MMU.
+		 */
+		__u64 cb_handle;
+
+		/* Relevant only when HL_CS_FLAGS_WAIT is set.
+		 * This holds address of array of u64 values that contain
+		 * signal CS sequence numbers. The wait described by this job
+		 * will listen on all those signals (wait event per signal)
+		 */
+		__u64 signal_seq_arr;
+	};
+
+	/* Index of queue to put the CB on */
+	__u32 queue_index;
+
+	union {
+		/*
+		 * Size of command buffer with valid packets
+		 * Can be smaller then actual CB size
+		 */
+		__u32 cb_size;
+
+		/* Relevant only when HL_CS_FLAGS_WAIT is set.
+		 * Number of entries in signal_seq_arr
+		 */
+		__u32 num_signal_seq_arr;
+	};
+
+	/* HL_CS_CHUNK_FLAGS_* */
+	__u32 cs_chunk_flags;
+
+	/* Align structure to 64 bytes */
+	__u32 pad[11];
+};
+
+/* SIGNAL and WAIT flags are mutually exclusive */
+#define HL_CS_FLAGS_FORCE_RESTORE	0x1
+#define HL_CS_FLAGS_SIGNAL		0x2
+#define HL_CS_FLAGS_WAIT		0x4
+
+#define HL_CS_STATUS_SUCCESS		0
+
+#define HL_MAX_JOBS_PER_CS		512
+
+struct hl_cs_in {
+
+	/* this holds address of array of hl_cs_chunk for restore phase */
+	__u64 chunks_restore;
+
+	/* holds address of array of hl_cs_chunk for execution phase */
+	__u64 chunks_execute;
+
+	/* this holds address of array of hl_cs_chunk for store phase -
+	 * Currently not in use
+	 */
+	__u64 chunks_store;
+
+	/* Number of chunks in restore phase array. Maximum number is
+	 * HL_MAX_JOBS_PER_CS
+	 */
+	__u32 num_chunks_restore;
+
+	/* Number of chunks in execution array. Maximum number is
+	 * HL_MAX_JOBS_PER_CS
+	 */
+	__u32 num_chunks_execute;
+
+	/* Number of chunks in restore phase array - Currently not in use */
+	__u32 num_chunks_store;
+
+	/* HL_CS_FLAGS_* */
+	__u32 cs_flags;
+
+	/* Context ID - Currently not in use */
+	__u32 ctx_id;
+};
+
+struct hl_cs_out {
+	/*
+	 * seq holds the sequence number of the CS to pass to wait ioctl. All
+	 * values are valid except for 0 and ULLONG_MAX
+	 */
+	__u64 seq;
+	/* HL_CS_STATUS_* */
+	__u32 status;
+	__u32 pad;
+};
+
+union hl_cs_args {
+	struct hl_cs_in in;
+	struct hl_cs_out out;
+};
+
+struct hl_wait_cs_in {
+	/* Command submission sequence number */
+	__u64 seq;
+	/* Absolute timeout to wait in microseconds */
+	__u64 timeout_us;
+	/* Context ID - Currently not in use */
+	__u32 ctx_id;
+	__u32 pad;
+};
+
+#define HL_WAIT_CS_STATUS_COMPLETED	0
+#define HL_WAIT_CS_STATUS_BUSY		1
+#define HL_WAIT_CS_STATUS_TIMEDOUT	2
+#define HL_WAIT_CS_STATUS_ABORTED	3
+#define HL_WAIT_CS_STATUS_INTERRUPTED	4
+
+struct hl_wait_cs_out {
+	/* HL_WAIT_CS_STATUS_* */
+	__u32 status;
+	__u32 pad;
+};
+
+union hl_wait_cs_args {
+	struct hl_wait_cs_in in;
+	struct hl_wait_cs_out out;
+};
+
+/* Opcode to allocate device memory */
+#define HL_MEM_OP_ALLOC			0
+/* Opcode to free previously allocated device memory */
+#define HL_MEM_OP_FREE			1
+/* Opcode to map host and device memory */
+#define HL_MEM_OP_MAP			2
+/* Opcode to unmap previously mapped host and device memory */
+#define HL_MEM_OP_UNMAP			3
+
+/* Memory flags */
+#define HL_MEM_CONTIGUOUS	0x1
+#define HL_MEM_SHARED		0x2
+#define HL_MEM_USERPTR		0x4
+
+struct hl_mem_in {
+	union {
+		/* HL_MEM_OP_ALLOC- allocate device memory */
+		struct {
+			/* Size to alloc */
+			__u64 mem_size;
+		} alloc;
+
+		/* HL_MEM_OP_FREE - free device memory */
+		struct {
+			/* Handle returned from HL_MEM_OP_ALLOC */
+			__u64 handle;
+		} free;
+
+		/* HL_MEM_OP_MAP - map device memory */
+		struct {
+			/*
+			 * Requested virtual address of mapped memory.
+			 * The driver will try to map the requested region to
+			 * this hint address, as long as the address is valid
+			 * and not already mapped. The user should check the
+			 * returned address of the IOCTL to make sure he got
+			 * the hint address. Passing 0 here means that the
+			 * driver will choose the address itself.
+			 */
+			__u64 hint_addr;
+			/* Handle returned from HL_MEM_OP_ALLOC */
+			__u64 handle;
+		} map_device;
+
+		/* HL_MEM_OP_MAP - map host memory */
+		struct {
+			/* Address of allocated host memory */
+			__u64 host_virt_addr;
+			/*
+			 * Requested virtual address of mapped memory.
+			 * The driver will try to map the requested region to
+			 * this hint address, as long as the address is valid
+			 * and not already mapped. The user should check the
+			 * returned address of the IOCTL to make sure he got
+			 * the hint address. Passing 0 here means that the
+			 * driver will choose the address itself.
+			 */
+			__u64 hint_addr;
+			/* Size of allocated host memory */
+			__u64 mem_size;
+		} map_host;
+
+		/* HL_MEM_OP_UNMAP - unmap host memory */
+		struct {
+			/* Virtual address returned from HL_MEM_OP_MAP */
+			__u64 device_virt_addr;
+		} unmap;
+	};
+
+	/* HL_MEM_OP_* */
+	__u32 op;
+	/* HL_MEM_* flags */
+	__u32 flags;
+	/* Context ID - Currently not in use */
+	__u32 ctx_id;
+	__u32 pad;
+};
+
+struct hl_mem_out {
+	union {
+		/*
+		 * Used for HL_MEM_OP_MAP as the virtual address that was
+		 * assigned in the device VA space.
+		 * A value of 0 means the requested operation failed.
+		 */
+		__u64 device_virt_addr;
+
+		/*
+		 * Used for HL_MEM_OP_ALLOC. This is the assigned
+		 * handle for the allocated memory
+		 */
+		__u64 handle;
+	};
+};
+
+union hl_mem_args {
+	struct hl_mem_in in;
+	struct hl_mem_out out;
+};
+
+#define HL_DEBUG_MAX_AUX_VALUES		10
+
+struct hl_debug_params_etr {
+	/* Address in memory to allocate buffer */
+	__u64 buffer_address;
+
+	/* Size of buffer to allocate */
+	__u64 buffer_size;
+
+	/* Sink operation mode: SW fifo, HW fifo, Circular buffer */
+	__u32 sink_mode;
+	__u32 pad;
+};
+
+struct hl_debug_params_etf {
+	/* Address in memory to allocate buffer */
+	__u64 buffer_address;
+
+	/* Size of buffer to allocate */
+	__u64 buffer_size;
+
+	/* Sink operation mode: SW fifo, HW fifo, Circular buffer */
+	__u32 sink_mode;
+	__u32 pad;
+};
+
+struct hl_debug_params_stm {
+	/* Two bit masks for HW event and Stimulus Port */
+	__u64 he_mask;
+	__u64 sp_mask;
+
+	/* Trace source ID */
+	__u32 id;
+
+	/* Frequency for the timestamp register */
+	__u32 frequency;
+};
+
+struct hl_debug_params_bmon {
+	/* Two address ranges that the user can request to filter */
+	__u64 start_addr0;
+	__u64 addr_mask0;
+
+	__u64 start_addr1;
+	__u64 addr_mask1;
+
+	/* Capture window configuration */
+	__u32 bw_win;
+	__u32 win_capture;
+
+	/* Trace source ID */
+	__u32 id;
+	__u32 pad;
+};
+
+struct hl_debug_params_spmu {
+	/* Event types selection */
+	__u64 event_types[HL_DEBUG_MAX_AUX_VALUES];
+
+	/* Number of event types selection */
+	__u32 event_types_num;
+	__u32 pad;
+};
+
+/* Opcode for ETR component */
+#define HL_DEBUG_OP_ETR		0
+/* Opcode for ETF component */
+#define HL_DEBUG_OP_ETF		1
+/* Opcode for STM component */
+#define HL_DEBUG_OP_STM		2
+/* Opcode for FUNNEL component */
+#define HL_DEBUG_OP_FUNNEL	3
+/* Opcode for BMON component */
+#define HL_DEBUG_OP_BMON	4
+/* Opcode for SPMU component */
+#define HL_DEBUG_OP_SPMU	5
+/* Opcode for timestamp (deprecated) */
+#define HL_DEBUG_OP_TIMESTAMP	6
+/* Opcode for setting the device into or out of debug mode. The enable
+ * variable should be 1 for enabling debug mode and 0 for disabling it
+ */
+#define HL_DEBUG_OP_SET_MODE	7
+
+struct hl_debug_args {
+	/*
+	 * Pointer to user input structure.
+	 * This field is relevant to specific opcodes.
+	 */
+	__u64 input_ptr;
+	/* Pointer to user output structure */
+	__u64 output_ptr;
+	/* Size of user input structure */
+	__u32 input_size;
+	/* Size of user output structure */
+	__u32 output_size;
+	/* HL_DEBUG_OP_* */
+	__u32 op;
+	/*
+	 * Register index in the component, taken from the debug_regs_index enum
+	 * in the various ASIC header files
+	 */
+	__u32 reg_idx;
+	/* Enable/disable */
+	__u32 enable;
+	/* Context ID - Currently not in use */
+	__u32 ctx_id;
+};
+
+/*
+ * Various information operations such as:
+ * - H/W IP information
+ * - Current dram usage
+ *
+ * The user calls this IOCTL with an opcode that describes the required
+ * information. The user should supply a pointer to a user-allocated memory
+ * chunk, which will be filled by the driver with the requested information.
+ *
+ * The user supplies the maximum amount of size to copy into the user's memory,
+ * in order to prevent data corruption in case of differences between the
+ * definitions of structures in kernel and userspace, e.g. in case of old
+ * userspace and new kernel driver
+ */
+#define HL_IOCTL_INFO	\
+		_IOWR('H', 0x01, struct hl_info_args)
+
+/*
+ * Command Buffer
+ * - Request a Command Buffer
+ * - Destroy a Command Buffer
+ *
+ * The command buffers are memory blocks that reside in DMA-able address
+ * space and are physically contiguous so they can be accessed by the device
+ * directly. They are allocated using the coherent DMA API.
+ *
+ * When creating a new CB, the IOCTL returns a handle of it, and the user-space
+ * process needs to use that handle to mmap the buffer so it can access them.
+ *
+ * In some instances, the device must access the command buffer through the
+ * device's MMU, and thus its memory should be mapped. In these cases, user can
+ * indicate the driver that such a mapping is required.
+ * The resulting device virtual address will be used internally by the driver,
+ * and won't be returned to user.
+ *
+ */
+#define HL_IOCTL_CB		\
+		_IOWR('H', 0x02, union hl_cb_args)
+
+/*
+ * Command Submission
+ *
+ * To submit work to the device, the user need to call this IOCTL with a set
+ * of JOBS. That set of JOBS constitutes a CS object.
+ * Each JOB will be enqueued on a specific queue, according to the user's input.
+ * There can be more then one JOB per queue.
+ *
+ * The CS IOCTL will receive three sets of JOBS. One set is for "restore" phase,
+ * a second set is for "execution" phase and a third set is for "store" phase.
+ * The JOBS on the "restore" phase are enqueued only after context-switch
+ * (or if its the first CS for this context). The user can also order the
+ * driver to run the "restore" phase explicitly
+ *
+ * There are two types of queues - external and internal. External queues
+ * are DMA queues which transfer data from/to the Host. All other queues are
+ * internal. The driver will get completion notifications from the device only
+ * on JOBS which are enqueued in the external queues.
+ *
+ * For jobs on external queues, the user needs to create command buffers
+ * through the CB ioctl and give the CB's handle to the CS ioctl. For jobs on
+ * internal queues, the user needs to prepare a "command buffer" with packets
+ * on either the device SRAM/DRAM or the host, and give the device address of
+ * that buffer to the CS ioctl.
+ *
+ * This IOCTL is asynchronous in regard to the actual execution of the CS. This
+ * means it returns immediately after ALL the JOBS were enqueued on their
+ * relevant queues. Therefore, the user mustn't assume the CS has been completed
+ * or has even started to execute.
+ *
+ * Upon successful enqueue, the IOCTL returns a sequence number which the user
+ * can use with the "Wait for CS" IOCTL to check whether the handle's CS
+ * external JOBS have been completed. Note that if the CS has internal JOBS
+ * which can execute AFTER the external JOBS have finished, the driver might
+ * report that the CS has finished executing BEFORE the internal JOBS have
+ * actually finished executing.
+ *
+ * Even though the sequence number increments per CS, the user can NOT
+ * automatically assume that if CS with sequence number N finished, then CS
+ * with sequence number N-1 also finished. The user can make this assumption if
+ * and only if CS N and CS N-1 are exactly the same (same CBs for the same
+ * queues).
+ */
+#define HL_IOCTL_CS			\
+		_IOWR('H', 0x03, union hl_cs_args)
+
+/*
+ * Wait for Command Submission
+ *
+ * The user can call this IOCTL with a handle it received from the CS IOCTL
+ * to wait until the handle's CS has finished executing. The user will wait
+ * inside the kernel until the CS has finished or until the user-requested
+ * timeout has expired.
+ *
+ * If the timeout value is 0, the driver won't sleep at all. It will check
+ * the status of the CS and return immediately
+ *
+ * The return value of the IOCTL is a standard Linux error code. The possible
+ * values are:
+ *
+ * EINTR     - Kernel waiting has been interrupted, e.g. due to OS signal
+ *             that the user process received
+ * ETIMEDOUT - The CS has caused a timeout on the device
+ * EIO       - The CS was aborted (usually because the device was reset)
+ * ENODEV    - The device wants to do hard-reset (so user need to close FD)
+ *
+ * The driver also returns a custom define inside the IOCTL which can be:
+ *
+ * HL_WAIT_CS_STATUS_COMPLETED   - The CS has been completed successfully (0)
+ * HL_WAIT_CS_STATUS_BUSY        - The CS is still executing (0)
+ * HL_WAIT_CS_STATUS_TIMEDOUT    - The CS has caused a timeout on the device
+ *                                 (ETIMEDOUT)
+ * HL_WAIT_CS_STATUS_ABORTED     - The CS was aborted, usually because the
+ *                                 device was reset (EIO)
+ * HL_WAIT_CS_STATUS_INTERRUPTED - Waiting for the CS was interrupted (EINTR)
+ *
+ */
+
+#define HL_IOCTL_WAIT_CS			\
+		_IOWR('H', 0x04, union hl_wait_cs_args)
+
+/*
+ * Memory
+ * - Map host memory to device MMU
+ * - Unmap host memory from device MMU
+ *
+ * This IOCTL allows the user to map host memory to the device MMU
+ *
+ * For host memory, the IOCTL doesn't allocate memory. The user is supposed
+ * to allocate the memory in user-space (malloc/new). The driver pins the
+ * physical pages (up to the allowed limit by the OS), assigns a virtual
+ * address in the device VA space and initializes the device MMU.
+ *
+ * There is an option for the user to specify the requested virtual address.
+ *
+ */
+#define HL_IOCTL_MEMORY		\
+		_IOWR('H', 0x05, union hl_mem_args)
+
+/*
+ * Debug
+ * - Enable/disable the ETR/ETF/FUNNEL/STM/BMON/SPMU debug traces
+ *
+ * This IOCTL allows the user to get debug traces from the chip.
+ *
+ * Before the user can send configuration requests of the various
+ * debug/profile engines, it needs to set the device into debug mode.
+ * This is because the debug/profile infrastructure is shared component in the
+ * device and we can't allow multiple users to access it at the same time.
+ *
+ * Once a user set the device into debug mode, the driver won't allow other
+ * users to "work" with the device, i.e. open a FD. If there are multiple users
+ * opened on the device, the driver won't allow any user to debug the device.
+ *
+ * For each configuration request, the user needs to provide the register index
+ * and essential data such as buffer address and size.
+ *
+ * Once the user has finished using the debug/profile engines, he should
+ * set the device into non-debug mode, i.e. disable debug mode.
+ *
+ * The driver can decide to "kick out" the user if he abuses this interface.
+ *
+ */
+#define HL_IOCTL_DEBUG		\
+		_IOWR('H', 0x06, struct hl_debug_args)
+
+#define HL_COMMAND_START	0x01
+#define HL_COMMAND_END		0x07
+
+#endif /* HABANALABS_H_ */