Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1336 insertions, 0 deletions

diff --git a/net/wireless/chan.c b/net/wireless/chan.c
new file mode 100644
index 000000000..22d1779ab
--- /dev/null
+++ b/net/wireless/chan.c
@@ -0,0 +1,1336 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This file contains helper code to handle channel
+ * settings and keeping track of what is possible at
+ * any point in time.
+ *
+ * Copyright 2009	Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2013-2014  Intel Mobile Communications GmbH
+ * Copyright 2018-2020	Intel Corporation
+ */
+
+#include <linux/export.h>
+#include <linux/bitfield.h>
+#include <net/cfg80211.h>
+#include "core.h"
+#include "rdev-ops.h"
+
+static bool cfg80211_valid_60g_freq(u32 freq)
+{
+	return freq >= 58320 && freq <= 70200;
+}
+
+void cfg80211_chandef_create(struct cfg80211_chan_def *chandef,
+			     struct ieee80211_channel *chan,
+			     enum nl80211_channel_type chan_type)
+{
+	if (WARN_ON(!chan))
+		return;
+
+	chandef->chan = chan;
+	chandef->freq1_offset = chan->freq_offset;
+	chandef->center_freq2 = 0;
+	chandef->edmg.bw_config = 0;
+	chandef->edmg.channels = 0;
+
+	switch (chan_type) {
+	case NL80211_CHAN_NO_HT:
+		chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
+		chandef->center_freq1 = chan->center_freq;
+		break;
+	case NL80211_CHAN_HT20:
+		chandef->width = NL80211_CHAN_WIDTH_20;
+		chandef->center_freq1 = chan->center_freq;
+		break;
+	case NL80211_CHAN_HT40PLUS:
+		chandef->width = NL80211_CHAN_WIDTH_40;
+		chandef->center_freq1 = chan->center_freq + 10;
+		break;
+	case NL80211_CHAN_HT40MINUS:
+		chandef->width = NL80211_CHAN_WIDTH_40;
+		chandef->center_freq1 = chan->center_freq - 10;
+		break;
+	default:
+		WARN_ON(1);
+	}
+}
+EXPORT_SYMBOL(cfg80211_chandef_create);
+
+static bool cfg80211_edmg_chandef_valid(const struct cfg80211_chan_def *chandef)
+{
+	int max_contiguous = 0;
+	int num_of_enabled = 0;
+	int contiguous = 0;
+	int i;
+
+	if (!chandef->edmg.channels || !chandef->edmg.bw_config)
+		return false;
+
+	if (!cfg80211_valid_60g_freq(chandef->chan->center_freq))
+		return false;
+
+	for (i = 0; i < 6; i++) {
+		if (chandef->edmg.channels & BIT(i)) {
+			contiguous++;
+			num_of_enabled++;
+		} else {
+			contiguous = 0;
+		}
+
+		max_contiguous = max(contiguous, max_contiguous);
+	}
+	/* basic verification of edmg configuration according to
+	 * IEEE P802.11ay/D4.0 section 9.4.2.251
+	 */
+	/* check bw_config against contiguous edmg channels */
+	switch (chandef->edmg.bw_config) {
+	case IEEE80211_EDMG_BW_CONFIG_4:
+	case IEEE80211_EDMG_BW_CONFIG_8:
+	case IEEE80211_EDMG_BW_CONFIG_12:
+		if (max_contiguous < 1)
+			return false;
+		break;
+	case IEEE80211_EDMG_BW_CONFIG_5:
+	case IEEE80211_EDMG_BW_CONFIG_9:
+	case IEEE80211_EDMG_BW_CONFIG_13:
+		if (max_contiguous < 2)
+			return false;
+		break;
+	case IEEE80211_EDMG_BW_CONFIG_6:
+	case IEEE80211_EDMG_BW_CONFIG_10:
+	case IEEE80211_EDMG_BW_CONFIG_14:
+		if (max_contiguous < 3)
+			return false;
+		break;
+	case IEEE80211_EDMG_BW_CONFIG_7:
+	case IEEE80211_EDMG_BW_CONFIG_11:
+	case IEEE80211_EDMG_BW_CONFIG_15:
+		if (max_contiguous < 4)
+			return false;
+		break;
+
+	default:
+		return false;
+	}
+
+	/* check bw_config against aggregated (non contiguous) edmg channels */
+	switch (chandef->edmg.bw_config) {
+	case IEEE80211_EDMG_BW_CONFIG_4:
+	case IEEE80211_EDMG_BW_CONFIG_5:
+	case IEEE80211_EDMG_BW_CONFIG_6:
+	case IEEE80211_EDMG_BW_CONFIG_7:
+		break;
+	case IEEE80211_EDMG_BW_CONFIG_8:
+	case IEEE80211_EDMG_BW_CONFIG_9:
+	case IEEE80211_EDMG_BW_CONFIG_10:
+	case IEEE80211_EDMG_BW_CONFIG_11:
+		if (num_of_enabled < 2)
+			return false;
+		break;
+	case IEEE80211_EDMG_BW_CONFIG_12:
+	case IEEE80211_EDMG_BW_CONFIG_13:
+	case IEEE80211_EDMG_BW_CONFIG_14:
+	case IEEE80211_EDMG_BW_CONFIG_15:
+		if (num_of_enabled < 4 || max_contiguous < 2)
+			return false;
+		break;
+	default:
+		return false;
+	}
+
+	return true;
+}
+
+static int nl80211_chan_width_to_mhz(enum nl80211_chan_width chan_width)
+{
+	int mhz;
+
+	switch (chan_width) {
+	case NL80211_CHAN_WIDTH_1:
+		mhz = 1;
+		break;
+	case NL80211_CHAN_WIDTH_2:
+		mhz = 2;
+		break;
+	case NL80211_CHAN_WIDTH_4:
+		mhz = 4;
+		break;
+	case NL80211_CHAN_WIDTH_8:
+		mhz = 8;
+		break;
+	case NL80211_CHAN_WIDTH_16:
+		mhz = 16;
+		break;
+	case NL80211_CHAN_WIDTH_5:
+		mhz = 5;
+		break;
+	case NL80211_CHAN_WIDTH_10:
+		mhz = 10;
+		break;
+	case NL80211_CHAN_WIDTH_20:
+	case NL80211_CHAN_WIDTH_20_NOHT:
+		mhz = 20;
+		break;
+	case NL80211_CHAN_WIDTH_40:
+		mhz = 40;
+		break;
+	case NL80211_CHAN_WIDTH_80P80:
+	case NL80211_CHAN_WIDTH_80:
+		mhz = 80;
+		break;
+	case NL80211_CHAN_WIDTH_160:
+		mhz = 160;
+		break;
+	default:
+		WARN_ON_ONCE(1);
+		return -1;
+	}
+	return mhz;
+}
+
+static int cfg80211_chandef_get_width(const struct cfg80211_chan_def *c)
+{
+	return nl80211_chan_width_to_mhz(c->width);
+}
+
+bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef)
+{
+	u32 control_freq, oper_freq;
+	int oper_width, control_width;
+
+	if (!chandef->chan)
+		return false;
+
+	if (chandef->freq1_offset >= 1000)
+		return false;
+
+	control_freq = chandef->chan->center_freq;
+
+	switch (chandef->width) {
+	case NL80211_CHAN_WIDTH_5:
+	case NL80211_CHAN_WIDTH_10:
+	case NL80211_CHAN_WIDTH_20:
+	case NL80211_CHAN_WIDTH_20_NOHT:
+		if (ieee80211_chandef_to_khz(chandef) !=
+		    ieee80211_channel_to_khz(chandef->chan))
+			return false;
+		if (chandef->center_freq2)
+			return false;
+		break;
+	case NL80211_CHAN_WIDTH_1:
+	case NL80211_CHAN_WIDTH_2:
+	case NL80211_CHAN_WIDTH_4:
+	case NL80211_CHAN_WIDTH_8:
+	case NL80211_CHAN_WIDTH_16:
+		if (chandef->chan->band != NL80211_BAND_S1GHZ)
+			return false;
+
+		control_freq = ieee80211_channel_to_khz(chandef->chan);
+		oper_freq = ieee80211_chandef_to_khz(chandef);
+		control_width = nl80211_chan_width_to_mhz(
+					ieee80211_s1g_channel_width(
+								chandef->chan));
+		oper_width = cfg80211_chandef_get_width(chandef);
+
+		if (oper_width < 0 || control_width < 0)
+			return false;
+		if (chandef->center_freq2)
+			return false;
+
+		if (control_freq + MHZ_TO_KHZ(control_width) / 2 >
+		    oper_freq + MHZ_TO_KHZ(oper_width) / 2)
+			return false;
+
+		if (control_freq - MHZ_TO_KHZ(control_width) / 2 <
+		    oper_freq - MHZ_TO_KHZ(oper_width) / 2)
+			return false;
+		break;
+	case NL80211_CHAN_WIDTH_40:
+		if (chandef->center_freq1 != control_freq + 10 &&
+		    chandef->center_freq1 != control_freq - 10)
+			return false;
+		if (chandef->center_freq2)
+			return false;
+		break;
+	case NL80211_CHAN_WIDTH_80P80:
+		if (chandef->center_freq1 != control_freq + 30 &&
+		    chandef->center_freq1 != control_freq + 10 &&
+		    chandef->center_freq1 != control_freq - 10 &&
+		    chandef->center_freq1 != control_freq - 30)
+			return false;
+		if (!chandef->center_freq2)
+			return false;
+		/* adjacent is not allowed -- that's a 160 MHz channel */
+		if (chandef->center_freq1 - chandef->center_freq2 == 80 ||
+		    chandef->center_freq2 - chandef->center_freq1 == 80)
+			return false;
+		break;
+	case NL80211_CHAN_WIDTH_80:
+		if (chandef->center_freq1 != control_freq + 30 &&
+		    chandef->center_freq1 != control_freq + 10 &&
+		    chandef->center_freq1 != control_freq - 10 &&
+		    chandef->center_freq1 != control_freq - 30)
+			return false;
+		if (chandef->center_freq2)
+			return false;
+		break;
+	case NL80211_CHAN_WIDTH_160:
+		if (chandef->center_freq1 != control_freq + 70 &&
+		    chandef->center_freq1 != control_freq + 50 &&
+		    chandef->center_freq1 != control_freq + 30 &&
+		    chandef->center_freq1 != control_freq + 10 &&
+		    chandef->center_freq1 != control_freq - 10 &&
+		    chandef->center_freq1 != control_freq - 30 &&
+		    chandef->center_freq1 != control_freq - 50 &&
+		    chandef->center_freq1 != control_freq - 70)
+			return false;
+		if (chandef->center_freq2)
+			return false;
+		break;
+	default:
+		return false;
+	}
+
+	/* channel 14 is only for IEEE 802.11b */
+	if (chandef->center_freq1 == 2484 &&
+	    chandef->width != NL80211_CHAN_WIDTH_20_NOHT)
+		return false;
+
+	if (cfg80211_chandef_is_edmg(chandef) &&
+	    !cfg80211_edmg_chandef_valid(chandef))
+		return false;
+
+	return true;
+}
+EXPORT_SYMBOL(cfg80211_chandef_valid);
+
+static void chandef_primary_freqs(const struct cfg80211_chan_def *c,
+				  u32 *pri40, u32 *pri80)
+{
+	int tmp;
+
+	switch (c->width) {
+	case NL80211_CHAN_WIDTH_40:
+		*pri40 = c->center_freq1;
+		*pri80 = 0;
+		break;
+	case NL80211_CHAN_WIDTH_80:
+	case NL80211_CHAN_WIDTH_80P80:
+		*pri80 = c->center_freq1;
+		/* n_P20 */
+		tmp = (30 + c->chan->center_freq - c->center_freq1)/20;
+		/* n_P40 */
+		tmp /= 2;
+		/* freq_P40 */
+		*pri40 = c->center_freq1 - 20 + 40 * tmp;
+		break;
+	case NL80211_CHAN_WIDTH_160:
+		/* n_P20 */
+		tmp = (70 + c->chan->center_freq - c->center_freq1)/20;
+		/* n_P40 */
+		tmp /= 2;
+		/* freq_P40 */
+		*pri40 = c->center_freq1 - 60 + 40 * tmp;
+		/* n_P80 */
+		tmp /= 2;
+		*pri80 = c->center_freq1 - 40 + 80 * tmp;
+		break;
+	default:
+		WARN_ON_ONCE(1);
+	}
+}
+
+const struct cfg80211_chan_def *
+cfg80211_chandef_compatible(const struct cfg80211_chan_def *c1,
+			    const struct cfg80211_chan_def *c2)
+{
+	u32 c1_pri40, c1_pri80, c2_pri40, c2_pri80;
+
+	/* If they are identical, return */
+	if (cfg80211_chandef_identical(c1, c2))
+		return c1;
+
+	/* otherwise, must have same control channel */
+	if (c1->chan != c2->chan)
+		return NULL;
+
+	/*
+	 * If they have the same width, but aren't identical,
+	 * then they can't be compatible.
+	 */
+	if (c1->width == c2->width)
+		return NULL;
+
+	/*
+	 * can't be compatible if one of them is 5 or 10 MHz,
+	 * but they don't have the same width.
+	 */
+	if (c1->width == NL80211_CHAN_WIDTH_5 ||
+	    c1->width == NL80211_CHAN_WIDTH_10 ||
+	    c2->width == NL80211_CHAN_WIDTH_5 ||
+	    c2->width == NL80211_CHAN_WIDTH_10)
+		return NULL;
+
+	if (c1->width == NL80211_CHAN_WIDTH_20_NOHT ||
+	    c1->width == NL80211_CHAN_WIDTH_20)
+		return c2;
+
+	if (c2->width == NL80211_CHAN_WIDTH_20_NOHT ||
+	    c2->width == NL80211_CHAN_WIDTH_20)
+		return c1;
+
+	chandef_primary_freqs(c1, &c1_pri40, &c1_pri80);
+	chandef_primary_freqs(c2, &c2_pri40, &c2_pri80);
+
+	if (c1_pri40 != c2_pri40)
+		return NULL;
+
+	WARN_ON(!c1_pri80 && !c2_pri80);
+	if (c1_pri80 && c2_pri80 && c1_pri80 != c2_pri80)
+		return NULL;
+
+	if (c1->width > c2->width)
+		return c1;
+	return c2;
+}
+EXPORT_SYMBOL(cfg80211_chandef_compatible);
+
+static void cfg80211_set_chans_dfs_state(struct wiphy *wiphy, u32 center_freq,
+					 u32 bandwidth,
+					 enum nl80211_dfs_state dfs_state)
+{
+	struct ieee80211_channel *c;
+	u32 freq;
+
+	for (freq = center_freq - bandwidth/2 + 10;
+	     freq <= center_freq + bandwidth/2 - 10;
+	     freq += 20) {
+		c = ieee80211_get_channel(wiphy, freq);
+		if (!c || !(c->flags & IEEE80211_CHAN_RADAR))
+			continue;
+
+		c->dfs_state = dfs_state;
+		c->dfs_state_entered = jiffies;
+	}
+}
+
+void cfg80211_set_dfs_state(struct wiphy *wiphy,
+			    const struct cfg80211_chan_def *chandef,
+			    enum nl80211_dfs_state dfs_state)
+{
+	int width;
+
+	if (WARN_ON(!cfg80211_chandef_valid(chandef)))
+		return;
+
+	width = cfg80211_chandef_get_width(chandef);
+	if (width < 0)
+		return;
+
+	cfg80211_set_chans_dfs_state(wiphy, chandef->center_freq1,
+				     width, dfs_state);
+
+	if (!chandef->center_freq2)
+		return;
+	cfg80211_set_chans_dfs_state(wiphy, chandef->center_freq2,
+				     width, dfs_state);
+}
+
+static u32 cfg80211_get_start_freq(u32 center_freq,
+				   u32 bandwidth)
+{
+	u32 start_freq;
+
+	bandwidth = MHZ_TO_KHZ(bandwidth);
+	if (bandwidth <= MHZ_TO_KHZ(20))
+		start_freq = center_freq;
+	else
+		start_freq = center_freq - bandwidth / 2 + MHZ_TO_KHZ(10);
+
+	return start_freq;
+}
+
+static u32 cfg80211_get_end_freq(u32 center_freq,
+				 u32 bandwidth)
+{
+	u32 end_freq;
+
+	bandwidth = MHZ_TO_KHZ(bandwidth);
+	if (bandwidth <= MHZ_TO_KHZ(20))
+		end_freq = center_freq;
+	else
+		end_freq = center_freq + bandwidth / 2 - MHZ_TO_KHZ(10);
+
+	return end_freq;
+}
+
+static int cfg80211_get_chans_dfs_required(struct wiphy *wiphy,
+					    u32 center_freq,
+					    u32 bandwidth)
+{
+	struct ieee80211_channel *c;
+	u32 freq, start_freq, end_freq;
+
+	start_freq = cfg80211_get_start_freq(center_freq, bandwidth);
+	end_freq = cfg80211_get_end_freq(center_freq, bandwidth);
+
+	for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) {
+		c = ieee80211_get_channel_khz(wiphy, freq);
+		if (!c)
+			return -EINVAL;
+
+		if (c->flags & IEEE80211_CHAN_RADAR)
+			return 1;
+	}
+	return 0;
+}
+
+
+int cfg80211_chandef_dfs_required(struct wiphy *wiphy,
+				  const struct cfg80211_chan_def *chandef,
+				  enum nl80211_iftype iftype)
+{
+	int width;
+	int ret;
+
+	if (WARN_ON(!cfg80211_chandef_valid(chandef)))
+		return -EINVAL;
+
+	switch (iftype) {
+	case NL80211_IFTYPE_ADHOC:
+	case NL80211_IFTYPE_AP:
+	case NL80211_IFTYPE_P2P_GO:
+	case NL80211_IFTYPE_MESH_POINT:
+		width = cfg80211_chandef_get_width(chandef);
+		if (width < 0)
+			return -EINVAL;
+
+		ret = cfg80211_get_chans_dfs_required(wiphy,
+					ieee80211_chandef_to_khz(chandef),
+					width);
+		if (ret < 0)
+			return ret;
+		else if (ret > 0)
+			return BIT(chandef->width);
+
+		if (!chandef->center_freq2)
+			return 0;
+
+		ret = cfg80211_get_chans_dfs_required(wiphy,
+					MHZ_TO_KHZ(chandef->center_freq2),
+					width);
+		if (ret < 0)
+			return ret;
+		else if (ret > 0)
+			return BIT(chandef->width);
+
+		break;
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_OCB:
+	case NL80211_IFTYPE_P2P_CLIENT:
+	case NL80211_IFTYPE_MONITOR:
+	case NL80211_IFTYPE_AP_VLAN:
+	case NL80211_IFTYPE_WDS:
+	case NL80211_IFTYPE_P2P_DEVICE:
+	case NL80211_IFTYPE_NAN:
+		break;
+	case NL80211_IFTYPE_UNSPECIFIED:
+	case NUM_NL80211_IFTYPES:
+		WARN_ON(1);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(cfg80211_chandef_dfs_required);
+
+static int cfg80211_get_chans_dfs_usable(struct wiphy *wiphy,
+					 u32 center_freq,
+					 u32 bandwidth)
+{
+	struct ieee80211_channel *c;
+	u32 freq, start_freq, end_freq;
+	int count = 0;
+
+	start_freq = cfg80211_get_start_freq(center_freq, bandwidth);
+	end_freq = cfg80211_get_end_freq(center_freq, bandwidth);
+
+	/*
+	 * Check entire range of channels for the bandwidth.
+	 * Check all channels are DFS channels (DFS_USABLE or
+	 * DFS_AVAILABLE). Return number of usable channels
+	 * (require CAC). Allow DFS and non-DFS channel mix.
+	 */
+	for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) {
+		c = ieee80211_get_channel_khz(wiphy, freq);
+		if (!c)
+			return -EINVAL;
+
+		if (c->flags & IEEE80211_CHAN_DISABLED)
+			return -EINVAL;
+
+		if (c->flags & IEEE80211_CHAN_RADAR) {
+			if (c->dfs_state == NL80211_DFS_UNAVAILABLE)
+				return -EINVAL;
+
+			if (c->dfs_state == NL80211_DFS_USABLE)
+				count++;
+		}
+	}
+
+	return count;
+}
+
+bool cfg80211_chandef_dfs_usable(struct wiphy *wiphy,
+				 const struct cfg80211_chan_def *chandef)
+{
+	int width;
+	int r1, r2 = 0;
+
+	if (WARN_ON(!cfg80211_chandef_valid(chandef)))
+		return false;
+
+	width = cfg80211_chandef_get_width(chandef);
+	if (width < 0)
+		return false;
+
+	r1 = cfg80211_get_chans_dfs_usable(wiphy,
+					   MHZ_TO_KHZ(chandef->center_freq1),
+					   width);
+
+	if (r1 < 0)
+		return false;
+
+	switch (chandef->width) {
+	case NL80211_CHAN_WIDTH_80P80:
+		WARN_ON(!chandef->center_freq2);
+		r2 = cfg80211_get_chans_dfs_usable(wiphy,
+					MHZ_TO_KHZ(chandef->center_freq2),
+					width);
+		if (r2 < 0)
+			return false;
+		break;
+	default:
+		WARN_ON(chandef->center_freq2);
+		break;
+	}
+
+	return (r1 + r2 > 0);
+}
+
+/*
+ * Checks if center frequency of chan falls with in the bandwidth
+ * range of chandef.
+ */
+bool cfg80211_is_sub_chan(struct cfg80211_chan_def *chandef,
+			  struct ieee80211_channel *chan)
+{
+	int width;
+	u32 freq;
+
+	if (chandef->chan->center_freq == chan->center_freq)
+		return true;
+
+	width = cfg80211_chandef_get_width(chandef);
+	if (width <= 20)
+		return false;
+
+	for (freq = chandef->center_freq1 - width / 2 + 10;
+	     freq <= chandef->center_freq1 + width / 2 - 10; freq += 20) {
+		if (chan->center_freq == freq)
+			return true;
+	}
+
+	if (!chandef->center_freq2)
+		return false;
+
+	for (freq = chandef->center_freq2 - width / 2 + 10;
+	     freq <= chandef->center_freq2 + width / 2 - 10; freq += 20) {
+		if (chan->center_freq == freq)
+			return true;
+	}
+
+	return false;
+}
+
+bool cfg80211_beaconing_iface_active(struct wireless_dev *wdev)
+{
+	bool active = false;
+
+	ASSERT_WDEV_LOCK(wdev);
+
+	if (!wdev->chandef.chan)
+		return false;
+
+	switch (wdev->iftype) {
+	case NL80211_IFTYPE_AP:
+	case NL80211_IFTYPE_P2P_GO:
+		active = wdev->beacon_interval != 0;
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		active = wdev->ssid_len != 0;
+		break;
+	case NL80211_IFTYPE_MESH_POINT:
+		active = wdev->mesh_id_len != 0;
+		break;
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_OCB:
+	case NL80211_IFTYPE_P2P_CLIENT:
+	case NL80211_IFTYPE_MONITOR:
+	case NL80211_IFTYPE_AP_VLAN:
+	case NL80211_IFTYPE_WDS:
+	case NL80211_IFTYPE_P2P_DEVICE:
+	/* Can NAN type be considered as beaconing interface? */
+	case NL80211_IFTYPE_NAN:
+		break;
+	case NL80211_IFTYPE_UNSPECIFIED:
+	case NUM_NL80211_IFTYPES:
+		WARN_ON(1);
+	}
+
+	return active;
+}
+
+static bool cfg80211_is_wiphy_oper_chan(struct wiphy *wiphy,
+					struct ieee80211_channel *chan)
+{
+	struct wireless_dev *wdev;
+
+	list_for_each_entry(wdev, &wiphy->wdev_list, list) {
+		wdev_lock(wdev);
+		if (!cfg80211_beaconing_iface_active(wdev)) {
+			wdev_unlock(wdev);
+			continue;
+		}
+
+		if (cfg80211_is_sub_chan(&wdev->chandef, chan)) {
+			wdev_unlock(wdev);
+			return true;
+		}
+		wdev_unlock(wdev);
+	}
+
+	return false;
+}
+
+bool cfg80211_any_wiphy_oper_chan(struct wiphy *wiphy,
+				  struct ieee80211_channel *chan)
+{
+	struct cfg80211_registered_device *rdev;
+
+	ASSERT_RTNL();
+
+	if (!(chan->flags & IEEE80211_CHAN_RADAR))
+		return false;
+
+	list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
+		if (!reg_dfs_domain_same(wiphy, &rdev->wiphy))
+			continue;
+
+		if (cfg80211_is_wiphy_oper_chan(&rdev->wiphy, chan))
+			return true;
+	}
+
+	return false;
+}
+
+static bool cfg80211_get_chans_dfs_available(struct wiphy *wiphy,
+					     u32 center_freq,
+					     u32 bandwidth)
+{
+	struct ieee80211_channel *c;
+	u32 freq, start_freq, end_freq;
+	bool dfs_offload;
+
+	dfs_offload = wiphy_ext_feature_isset(wiphy,
+					      NL80211_EXT_FEATURE_DFS_OFFLOAD);
+
+	start_freq = cfg80211_get_start_freq(center_freq, bandwidth);
+	end_freq = cfg80211_get_end_freq(center_freq, bandwidth);
+
+	/*
+	 * Check entire range of channels for the bandwidth.
+	 * If any channel in between is disabled or has not
+	 * had gone through CAC return false
+	 */
+	for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) {
+		c = ieee80211_get_channel_khz(wiphy, freq);
+		if (!c)
+			return false;
+
+		if (c->flags & IEEE80211_CHAN_DISABLED)
+			return false;
+
+		if ((c->flags & IEEE80211_CHAN_RADAR) &&
+		    (c->dfs_state != NL80211_DFS_AVAILABLE) &&
+		    !(c->dfs_state == NL80211_DFS_USABLE && dfs_offload))
+			return false;
+	}
+
+	return true;
+}
+
+static bool cfg80211_chandef_dfs_available(struct wiphy *wiphy,
+				const struct cfg80211_chan_def *chandef)
+{
+	int width;
+	int r;
+
+	if (WARN_ON(!cfg80211_chandef_valid(chandef)))
+		return false;
+
+	width = cfg80211_chandef_get_width(chandef);
+	if (width < 0)
+		return false;
+
+	r = cfg80211_get_chans_dfs_available(wiphy,
+					     MHZ_TO_KHZ(chandef->center_freq1),
+					     width);
+
+	/* If any of channels unavailable for cf1 just return */
+	if (!r)
+		return r;
+
+	switch (chandef->width) {
+	case NL80211_CHAN_WIDTH_80P80:
+		WARN_ON(!chandef->center_freq2);
+		r = cfg80211_get_chans_dfs_available(wiphy,
+					MHZ_TO_KHZ(chandef->center_freq2),
+					width);
+		break;
+	default:
+		WARN_ON(chandef->center_freq2);
+		break;
+	}
+
+	return r;
+}
+
+static unsigned int cfg80211_get_chans_dfs_cac_time(struct wiphy *wiphy,
+						    u32 center_freq,
+						    u32 bandwidth)
+{
+	struct ieee80211_channel *c;
+	u32 start_freq, end_freq, freq;
+	unsigned int dfs_cac_ms = 0;
+
+	start_freq = cfg80211_get_start_freq(center_freq, bandwidth);
+	end_freq = cfg80211_get_end_freq(center_freq, bandwidth);
+
+	for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) {
+		c = ieee80211_get_channel_khz(wiphy, freq);
+		if (!c)
+			return 0;
+
+		if (c->flags & IEEE80211_CHAN_DISABLED)
+			return 0;
+
+		if (!(c->flags & IEEE80211_CHAN_RADAR))
+			continue;
+
+		if (c->dfs_cac_ms > dfs_cac_ms)
+			dfs_cac_ms = c->dfs_cac_ms;
+	}
+
+	return dfs_cac_ms;
+}
+
+unsigned int
+cfg80211_chandef_dfs_cac_time(struct wiphy *wiphy,
+			      const struct cfg80211_chan_def *chandef)
+{
+	int width;
+	unsigned int t1 = 0, t2 = 0;
+
+	if (WARN_ON(!cfg80211_chandef_valid(chandef)))
+		return 0;
+
+	width = cfg80211_chandef_get_width(chandef);
+	if (width < 0)
+		return 0;
+
+	t1 = cfg80211_get_chans_dfs_cac_time(wiphy,
+					     MHZ_TO_KHZ(chandef->center_freq1),
+					     width);
+
+	if (!chandef->center_freq2)
+		return t1;
+
+	t2 = cfg80211_get_chans_dfs_cac_time(wiphy,
+					     MHZ_TO_KHZ(chandef->center_freq2),
+					     width);
+
+	return max(t1, t2);
+}
+
+static bool cfg80211_secondary_chans_ok(struct wiphy *wiphy,
+					u32 center_freq, u32 bandwidth,
+					u32 prohibited_flags)
+{
+	struct ieee80211_channel *c;
+	u32 freq, start_freq, end_freq;
+
+	start_freq = cfg80211_get_start_freq(center_freq, bandwidth);
+	end_freq = cfg80211_get_end_freq(center_freq, bandwidth);
+
+	for (freq = start_freq; freq <= end_freq; freq += MHZ_TO_KHZ(20)) {
+		c = ieee80211_get_channel_khz(wiphy, freq);
+		if (!c || c->flags & prohibited_flags)
+			return false;
+	}
+
+	return true;
+}
+
+/* check if the operating channels are valid and supported */
+static bool cfg80211_edmg_usable(struct wiphy *wiphy, u8 edmg_channels,
+				 enum ieee80211_edmg_bw_config edmg_bw_config,
+				 int primary_channel,
+				 struct ieee80211_edmg *edmg_cap)
+{
+	struct ieee80211_channel *chan;
+	int i, freq;
+	int channels_counter = 0;
+
+	if (!edmg_channels && !edmg_bw_config)
+		return true;
+
+	if ((!edmg_channels && edmg_bw_config) ||
+	    (edmg_channels && !edmg_bw_config))
+		return false;
+
+	if (!(edmg_channels & BIT(primary_channel - 1)))
+		return false;
+
+	/* 60GHz channels 1..6 */
+	for (i = 0; i < 6; i++) {
+		if (!(edmg_channels & BIT(i)))
+			continue;
+
+		if (!(edmg_cap->channels & BIT(i)))
+			return false;
+
+		channels_counter++;
+
+		freq = ieee80211_channel_to_frequency(i + 1,
+						      NL80211_BAND_60GHZ);
+		chan = ieee80211_get_channel(wiphy, freq);
+		if (!chan || chan->flags & IEEE80211_CHAN_DISABLED)
+			return false;
+	}
+
+	/* IEEE802.11 allows max 4 channels */
+	if (channels_counter > 4)
+		return false;
+
+	/* check bw_config is a subset of what driver supports
+	 * (see IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13)
+	 */
+	if ((edmg_bw_config % 4) > (edmg_cap->bw_config % 4))
+		return false;
+
+	if (edmg_bw_config > edmg_cap->bw_config)
+		return false;
+
+	return true;
+}
+
+bool cfg80211_chandef_usable(struct wiphy *wiphy,
+			     const struct cfg80211_chan_def *chandef,
+			     u32 prohibited_flags)
+{
+	struct ieee80211_sta_ht_cap *ht_cap;
+	struct ieee80211_sta_vht_cap *vht_cap;
+	struct ieee80211_edmg *edmg_cap;
+	u32 width, control_freq, cap;
+	bool support_80_80 = false;
+
+	if (WARN_ON(!cfg80211_chandef_valid(chandef)))
+		return false;
+
+	ht_cap = &wiphy->bands[chandef->chan->band]->ht_cap;
+	vht_cap = &wiphy->bands[chandef->chan->band]->vht_cap;
+	edmg_cap = &wiphy->bands[chandef->chan->band]->edmg_cap;
+
+	if (edmg_cap->channels &&
+	    !cfg80211_edmg_usable(wiphy,
+				  chandef->edmg.channels,
+				  chandef->edmg.bw_config,
+				  chandef->chan->hw_value,
+				  edmg_cap))
+		return false;
+
+	control_freq = chandef->chan->center_freq;
+
+	switch (chandef->width) {
+	case NL80211_CHAN_WIDTH_1:
+		width = 1;
+		break;
+	case NL80211_CHAN_WIDTH_2:
+		width = 2;
+		break;
+	case NL80211_CHAN_WIDTH_4:
+		width = 4;
+		break;
+	case NL80211_CHAN_WIDTH_8:
+		width = 8;
+		break;
+	case NL80211_CHAN_WIDTH_16:
+		width = 16;
+		break;
+	case NL80211_CHAN_WIDTH_5:
+		width = 5;
+		break;
+	case NL80211_CHAN_WIDTH_10:
+		prohibited_flags |= IEEE80211_CHAN_NO_10MHZ;
+		width = 10;
+		break;
+	case NL80211_CHAN_WIDTH_20:
+		if (!ht_cap->ht_supported &&
+		    chandef->chan->band != NL80211_BAND_6GHZ)
+			return false;
+		fallthrough;
+	case NL80211_CHAN_WIDTH_20_NOHT:
+		prohibited_flags |= IEEE80211_CHAN_NO_20MHZ;
+		width = 20;
+		break;
+	case NL80211_CHAN_WIDTH_40:
+		width = 40;
+		if (chandef->chan->band == NL80211_BAND_6GHZ)
+			break;
+		if (!ht_cap->ht_supported)
+			return false;
+		if (!(ht_cap->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) ||
+		    ht_cap->cap & IEEE80211_HT_CAP_40MHZ_INTOLERANT)
+			return false;
+		if (chandef->center_freq1 < control_freq &&
+		    chandef->chan->flags & IEEE80211_CHAN_NO_HT40MINUS)
+			return false;
+		if (chandef->center_freq1 > control_freq &&
+		    chandef->chan->flags & IEEE80211_CHAN_NO_HT40PLUS)
+			return false;
+		break;
+	case NL80211_CHAN_WIDTH_80P80:
+		cap = vht_cap->cap;
+		support_80_80 =
+			(cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) ||
+			(cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ &&
+			 cap & IEEE80211_VHT_CAP_EXT_NSS_BW_MASK) ||
+			u32_get_bits(cap, IEEE80211_VHT_CAP_EXT_NSS_BW_MASK) > 1;
+		if (chandef->chan->band != NL80211_BAND_6GHZ && !support_80_80)
+			return false;
+		fallthrough;
+	case NL80211_CHAN_WIDTH_80:
+		prohibited_flags |= IEEE80211_CHAN_NO_80MHZ;
+		width = 80;
+		if (chandef->chan->band == NL80211_BAND_6GHZ)
+			break;
+		if (!vht_cap->vht_supported)
+			return false;
+		break;
+	case NL80211_CHAN_WIDTH_160:
+		prohibited_flags |= IEEE80211_CHAN_NO_160MHZ;
+		width = 160;
+		if (chandef->chan->band == NL80211_BAND_6GHZ)
+			break;
+		if (!vht_cap->vht_supported)
+			return false;
+		cap = vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
+		if (cap != IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ &&
+		    cap != IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ &&
+		    !(vht_cap->cap & IEEE80211_VHT_CAP_EXT_NSS_BW_MASK))
+			return false;
+		break;
+	default:
+		WARN_ON_ONCE(1);
+		return false;
+	}
+
+	/*
+	 * TODO: What if there are only certain 80/160/80+80 MHz channels
+	 *	 allowed by the driver, or only certain combinations?
+	 *	 For 40 MHz the driver can set the NO_HT40 flags, but for
+	 *	 80/160 MHz and in particular 80+80 MHz this isn't really
+	 *	 feasible and we only have NO_80MHZ/NO_160MHZ so far but
+	 *	 no way to cover 80+80 MHz or more complex restrictions.
+	 *	 Note that such restrictions also need to be advertised to
+	 *	 userspace, for example for P2P channel selection.
+	 */
+
+	if (width > 20)
+		prohibited_flags |= IEEE80211_CHAN_NO_OFDM;
+
+	/* 5 and 10 MHz are only defined for the OFDM PHY */
+	if (width < 20)
+		prohibited_flags |= IEEE80211_CHAN_NO_OFDM;
+
+
+	if (!cfg80211_secondary_chans_ok(wiphy,
+					 ieee80211_chandef_to_khz(chandef),
+					 width, prohibited_flags))
+		return false;
+
+	if (!chandef->center_freq2)
+		return true;
+	return cfg80211_secondary_chans_ok(wiphy,
+					   MHZ_TO_KHZ(chandef->center_freq2),
+					   width, prohibited_flags);
+}
+EXPORT_SYMBOL(cfg80211_chandef_usable);
+
+/*
+ * Check if the channel can be used under permissive conditions mandated by
+ * some regulatory bodies, i.e., the channel is marked with
+ * IEEE80211_CHAN_IR_CONCURRENT and there is an additional station interface
+ * associated to an AP on the same channel or on the same UNII band
+ * (assuming that the AP is an authorized master).
+ * In addition allow operation on a channel on which indoor operation is
+ * allowed, iff we are currently operating in an indoor environment.
+ */
+static bool cfg80211_ir_permissive_chan(struct wiphy *wiphy,
+					enum nl80211_iftype iftype,
+					struct ieee80211_channel *chan)
+{
+	struct wireless_dev *wdev;
+	struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
+
+	ASSERT_RTNL();
+
+	if (!IS_ENABLED(CONFIG_CFG80211_REG_RELAX_NO_IR) ||
+	    !(wiphy->regulatory_flags & REGULATORY_ENABLE_RELAX_NO_IR))
+		return false;
+
+	/* only valid for GO and TDLS off-channel (station/p2p-CL) */
+	if (iftype != NL80211_IFTYPE_P2P_GO &&
+	    iftype != NL80211_IFTYPE_STATION &&
+	    iftype != NL80211_IFTYPE_P2P_CLIENT)
+		return false;
+
+	if (regulatory_indoor_allowed() &&
+	    (chan->flags & IEEE80211_CHAN_INDOOR_ONLY))
+		return true;
+
+	if (!(chan->flags & IEEE80211_CHAN_IR_CONCURRENT))
+		return false;
+
+	/*
+	 * Generally, it is possible to rely on another device/driver to allow
+	 * the IR concurrent relaxation, however, since the device can further
+	 * enforce the relaxation (by doing a similar verifications as this),
+	 * and thus fail the GO instantiation, consider only the interfaces of
+	 * the current registered device.
+	 */
+	list_for_each_entry(wdev, &rdev->wiphy.wdev_list, list) {
+		struct ieee80211_channel *other_chan = NULL;
+		int r1, r2;
+
+		wdev_lock(wdev);
+		if (wdev->iftype == NL80211_IFTYPE_STATION &&
+		    wdev->current_bss)
+			other_chan = wdev->current_bss->pub.channel;
+
+		/*
+		 * If a GO already operates on the same GO_CONCURRENT channel,
+		 * this one (maybe the same one) can beacon as well. We allow
+		 * the operation even if the station we relied on with
+		 * GO_CONCURRENT is disconnected now. But then we must make sure
+		 * we're not outdoor on an indoor-only channel.
+		 */
+		if (iftype == NL80211_IFTYPE_P2P_GO &&
+		    wdev->iftype == NL80211_IFTYPE_P2P_GO &&
+		    wdev->beacon_interval &&
+		    !(chan->flags & IEEE80211_CHAN_INDOOR_ONLY))
+			other_chan = wdev->chandef.chan;
+		wdev_unlock(wdev);
+
+		if (!other_chan)
+			continue;
+
+		if (chan == other_chan)
+			return true;
+
+		if (chan->band != NL80211_BAND_5GHZ &&
+		    chan->band != NL80211_BAND_6GHZ)
+			continue;
+
+		r1 = cfg80211_get_unii(chan->center_freq);
+		r2 = cfg80211_get_unii(other_chan->center_freq);
+
+		if (r1 != -EINVAL && r1 == r2) {
+			/*
+			 * At some locations channels 149-165 are considered a
+			 * bundle, but at other locations, e.g., Indonesia,
+			 * channels 149-161 are considered a bundle while
+			 * channel 165 is left out and considered to be in a
+			 * different bundle. Thus, in case that there is a
+			 * station interface connected to an AP on channel 165,
+			 * it is assumed that channels 149-161 are allowed for
+			 * GO operations. However, having a station interface
+			 * connected to an AP on channels 149-161, does not
+			 * allow GO operation on channel 165.
+			 */
+			if (chan->center_freq == 5825 &&
+			    other_chan->center_freq != 5825)
+				continue;
+			return true;
+		}
+	}
+
+	return false;
+}
+
+static bool _cfg80211_reg_can_beacon(struct wiphy *wiphy,
+				     struct cfg80211_chan_def *chandef,
+				     enum nl80211_iftype iftype,
+				     bool check_no_ir)
+{
+	bool res;
+	u32 prohibited_flags = IEEE80211_CHAN_DISABLED |
+			       IEEE80211_CHAN_RADAR;
+
+	trace_cfg80211_reg_can_beacon(wiphy, chandef, iftype, check_no_ir);
+
+	if (check_no_ir)
+		prohibited_flags |= IEEE80211_CHAN_NO_IR;
+
+	if (cfg80211_chandef_dfs_required(wiphy, chandef, iftype) > 0 &&
+	    cfg80211_chandef_dfs_available(wiphy, chandef)) {
+		/* We can skip IEEE80211_CHAN_NO_IR if chandef dfs available */
+		prohibited_flags = IEEE80211_CHAN_DISABLED;
+	}
+
+	res = cfg80211_chandef_usable(wiphy, chandef, prohibited_flags);
+
+	trace_cfg80211_return_bool(res);
+	return res;
+}
+
+bool cfg80211_reg_can_beacon(struct wiphy *wiphy,
+			     struct cfg80211_chan_def *chandef,
+			     enum nl80211_iftype iftype)
+{
+	return _cfg80211_reg_can_beacon(wiphy, chandef, iftype, true);
+}
+EXPORT_SYMBOL(cfg80211_reg_can_beacon);
+
+bool cfg80211_reg_can_beacon_relax(struct wiphy *wiphy,
+				   struct cfg80211_chan_def *chandef,
+				   enum nl80211_iftype iftype)
+{
+	bool check_no_ir;
+
+	ASSERT_RTNL();
+
+	/*
+	 * Under certain conditions suggested by some regulatory bodies a
+	 * GO/STA can IR on channels marked with IEEE80211_NO_IR. Set this flag
+	 * only if such relaxations are not enabled and the conditions are not
+	 * met.
+	 */
+	check_no_ir = !cfg80211_ir_permissive_chan(wiphy, iftype,
+						   chandef->chan);
+
+	return _cfg80211_reg_can_beacon(wiphy, chandef, iftype, check_no_ir);
+}
+EXPORT_SYMBOL(cfg80211_reg_can_beacon_relax);
+
+int cfg80211_set_monitor_channel(struct cfg80211_registered_device *rdev,
+				 struct cfg80211_chan_def *chandef)
+{
+	if (!rdev->ops->set_monitor_channel)
+		return -EOPNOTSUPP;
+	if (!cfg80211_has_monitors_only(rdev))
+		return -EBUSY;
+
+	return rdev_set_monitor_channel(rdev, chandef);
+}
+
+void
+cfg80211_get_chan_state(struct wireless_dev *wdev,
+		        struct ieee80211_channel **chan,
+		        enum cfg80211_chan_mode *chanmode,
+		        u8 *radar_detect)
+{
+	int ret;
+
+	*chan = NULL;
+	*chanmode = CHAN_MODE_UNDEFINED;
+
+	ASSERT_WDEV_LOCK(wdev);
+
+	if (wdev->netdev && !netif_running(wdev->netdev))
+		return;
+
+	switch (wdev->iftype) {
+	case NL80211_IFTYPE_ADHOC:
+		if (wdev->current_bss) {
+			*chan = wdev->current_bss->pub.channel;
+			*chanmode = (wdev->ibss_fixed &&
+				     !wdev->ibss_dfs_possible)
+				  ? CHAN_MODE_SHARED
+				  : CHAN_MODE_EXCLUSIVE;
+
+			/* consider worst-case - IBSS can try to return to the
+			 * original user-specified channel as creator */
+			if (wdev->ibss_dfs_possible)
+				*radar_detect |= BIT(wdev->chandef.width);
+			return;
+		}
+		break;
+	case NL80211_IFTYPE_STATION:
+	case NL80211_IFTYPE_P2P_CLIENT:
+		if (wdev->current_bss) {
+			*chan = wdev->current_bss->pub.channel;
+			*chanmode = CHAN_MODE_SHARED;
+			return;
+		}
+		break;
+	case NL80211_IFTYPE_AP:
+	case NL80211_IFTYPE_P2P_GO:
+		if (wdev->cac_started) {
+			*chan = wdev->chandef.chan;
+			*chanmode = CHAN_MODE_SHARED;
+			*radar_detect |= BIT(wdev->chandef.width);
+		} else if (wdev->beacon_interval) {
+			*chan = wdev->chandef.chan;
+			*chanmode = CHAN_MODE_SHARED;
+
+			ret = cfg80211_chandef_dfs_required(wdev->wiphy,
+							    &wdev->chandef,
+							    wdev->iftype);
+			WARN_ON(ret < 0);
+			if (ret > 0)
+				*radar_detect |= BIT(wdev->chandef.width);
+		}
+		return;
+	case NL80211_IFTYPE_MESH_POINT:
+		if (wdev->mesh_id_len) {
+			*chan = wdev->chandef.chan;
+			*chanmode = CHAN_MODE_SHARED;
+
+			ret = cfg80211_chandef_dfs_required(wdev->wiphy,
+							    &wdev->chandef,
+							    wdev->iftype);
+			WARN_ON(ret < 0);
+			if (ret > 0)
+				*radar_detect |= BIT(wdev->chandef.width);
+		}
+		return;
+	case NL80211_IFTYPE_OCB:
+		if (wdev->chandef.chan) {
+			*chan = wdev->chandef.chan;
+			*chanmode = CHAN_MODE_SHARED;
+			return;
+		}
+		break;
+	case NL80211_IFTYPE_MONITOR:
+	case NL80211_IFTYPE_AP_VLAN:
+	case NL80211_IFTYPE_WDS:
+	case NL80211_IFTYPE_P2P_DEVICE:
+	case NL80211_IFTYPE_NAN:
+		/* these interface types don't really have a channel */
+		return;
+	case NL80211_IFTYPE_UNSPECIFIED:
+	case NUM_NL80211_IFTYPES:
+		WARN_ON(1);
+	}
+}