Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 96 insertions, 0 deletions

diff --git a/sound/pci/echoaudio/darla24.c b/sound/pci/echoaudio/darla24.c
new file mode 100644
index 000000000..ae816e78f
--- /dev/null
+++ b/sound/pci/echoaudio/darla24.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  ALSA driver for Echoaudio soundcards.
+ *  Copyright (C) 2003-2004 Giuliano Pochini <pochini@shiny.it>
+ */
+
+#define ECHOGALS_FAMILY
+#define ECHOCARD_DARLA24
+#define ECHOCARD_NAME "Darla24"
+#define ECHOCARD_HAS_MONITOR
+#define ECHOCARD_HAS_INPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_OUTPUT_NOMINAL_LEVEL
+#define ECHOCARD_HAS_EXTERNAL_CLOCK
+#define ECHOCARD_HAS_SUPER_INTERLEAVE
+
+/* Pipe indexes */
+#define PX_ANALOG_OUT	0	/* 8 */
+#define PX_DIGITAL_OUT	8	/* 0 */
+#define PX_ANALOG_IN	8	/* 2 */
+#define PX_DIGITAL_IN	10	/* 0 */
+#define PX_NUM		10
+
+/* Bus indexes */
+#define BX_ANALOG_OUT	0	/* 8 */
+#define BX_DIGITAL_OUT	8	/* 0 */
+#define BX_ANALOG_IN	8	/* 2 */
+#define BX_DIGITAL_IN	10	/* 0 */
+#define BX_NUM		10
+
+
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <sound/core.h>
+#include <sound/info.h>
+#include <sound/control.h>
+#include <sound/tlv.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/asoundef.h>
+#include <sound/initval.h>
+#include <linux/atomic.h>
+#include "echoaudio.h"
+
+MODULE_FIRMWARE("ea/darla24_dsp.fw");
+
+#define FW_DARLA24_DSP	0
+
+static const struct firmware card_fw[] = {
+	{0, "darla24_dsp.fw"}
+};
+
+static const struct pci_device_id snd_echo_ids[] = {
+	{0x1057, 0x1801, 0xECC0, 0x0040, 0, 0, 0},	/* DSP 56301 Darla24 rev.0 */
+	{0x1057, 0x1801, 0xECC0, 0x0041, 0, 0, 0},	/* DSP 56301 Darla24 rev.1 */
+	{0,}
+};
+
+static const struct snd_pcm_hardware pcm_hardware_skel = {
+	.info = SNDRV_PCM_INFO_MMAP |
+		SNDRV_PCM_INFO_INTERLEAVED |
+		SNDRV_PCM_INFO_BLOCK_TRANSFER |
+		SNDRV_PCM_INFO_MMAP_VALID |
+		SNDRV_PCM_INFO_PAUSE |
+		SNDRV_PCM_INFO_SYNC_START,
+	.formats =	SNDRV_PCM_FMTBIT_U8 |
+			SNDRV_PCM_FMTBIT_S16_LE |
+			SNDRV_PCM_FMTBIT_S24_3LE |
+			SNDRV_PCM_FMTBIT_S32_LE |
+			SNDRV_PCM_FMTBIT_S32_BE,
+	.rates =	SNDRV_PCM_RATE_8000_48000 |
+			SNDRV_PCM_RATE_88200 |
+			SNDRV_PCM_RATE_96000,
+	.rate_min = 8000,
+	.rate_max = 96000,
+	.channels_min = 1,
+	.channels_max = 8,
+	.buffer_bytes_max = 262144,
+	.period_bytes_min = 32,
+	.period_bytes_max = 131072,
+	.periods_min = 2,
+	.periods_max = 220,
+	/* One page (4k) contains 512 instructions. I don't know if the hw
+	supports lists longer than this. In this case periods_max=220 is a
+	safe limit to make sure the list never exceeds 512 instructions. */
+};
+
+
+#include "darla24_dsp.c"
+#include "echoaudio_dsp.c"
+#include "echoaudio.c"