Adding upstream version 5.10.209.upstream/5.10.209

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 70 insertions, 0 deletions

diff --git a/sound/soc/pxa/mmp-sspa.h b/sound/soc/pxa/mmp-sspa.h
new file mode 100644
index 000000000..938ef2f66
--- /dev/null
+++ b/sound/soc/pxa/mmp-sspa.h
@@ -0,0 +1,70 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * linux/sound/soc/pxa/mmp-sspa.h
+ *
+ * Copyright (C) 2011 Marvell International Ltd.
+ */
+#ifndef _MMP_SSPA_H
+#define _MMP_SSPA_H
+
+/*
+ * SSPA Registers
+ */
+#define SSPA_D			(0x00)
+#define SSPA_ID			(0x04)
+#define SSPA_CTL		(0x08)
+#define SSPA_SP			(0x0c)
+#define SSPA_FIFO_UL		(0x10)
+#define SSPA_INT_MASK		(0x14)
+#define SSPA_C			(0x18)
+#define SSPA_FIFO_NOFS		(0x1c)
+#define SSPA_FIFO_SIZE		(0x20)
+
+/* SSPA Control Register */
+#define	SSPA_CTL_XPH		(1 << 31)	/* Read Phase */
+#define	SSPA_CTL_XFIG		(1 << 15)	/* Transmit Zeros when FIFO Empty */
+#define	SSPA_CTL_JST		(1 << 3)	/* Audio Sample Justification */
+#define	SSPA_CTL_XFRLEN2_MASK	(7 << 24)
+#define	SSPA_CTL_XFRLEN2(x)	((x) << 24)	/* Transmit Frame Length in Phase 2 */
+#define	SSPA_CTL_XWDLEN2_MASK	(7 << 21)
+#define	SSPA_CTL_XWDLEN2(x)	((x) << 21)	/* Transmit Word Length in Phase 2 */
+#define	SSPA_CTL_XDATDLY(x)	((x) << 19)	/* Transmit Data Delay */
+#define	SSPA_CTL_XSSZ2_MASK	(7 << 16)
+#define	SSPA_CTL_XSSZ2(x)	((x) << 16)	/* Transmit Sample Audio Size */
+#define	SSPA_CTL_XFRLEN1_MASK	(7 << 8)
+#define	SSPA_CTL_XFRLEN1(x)	((x) << 8)	/* Transmit Frame Length in Phase 1 */
+#define	SSPA_CTL_XWDLEN1_MASK	(7 << 5)
+#define	SSPA_CTL_XWDLEN1(x)	((x) << 5)	/* Transmit Word Length in Phase 1 */
+#define	SSPA_CTL_XSSZ1_MASK	(7 << 0)
+#define	SSPA_CTL_XSSZ1(x)	((x) << 0)	/* XSSZ1 */
+
+#define SSPA_CTL_8_BITS		(0x0)		/* Sample Size */
+#define SSPA_CTL_12_BITS	(0x1)
+#define SSPA_CTL_16_BITS	(0x2)
+#define SSPA_CTL_20_BITS	(0x3)
+#define SSPA_CTL_24_BITS	(0x4)
+#define SSPA_CTL_32_BITS	(0x5)
+
+/* SSPA Serial Port Register */
+#define	SSPA_SP_WEN		(1 << 31)	/* Write Configuration Enable */
+#define	SSPA_SP_MSL		(1 << 18)	/* Master Slave Configuration */
+#define	SSPA_SP_CLKP		(1 << 17)	/* CLKP Polarity Clock Edge Select */
+#define	SSPA_SP_FSP		(1 << 16)	/* FSP Polarity Clock Edge Select */
+#define	SSPA_SP_FFLUSH		(1 << 2)	/* FIFO Flush */
+#define	SSPA_SP_S_RST		(1 << 1)	/* Active High Reset Signal */
+#define	SSPA_SP_S_EN		(1 << 0)	/* Serial Clock Domain Enable */
+#define	SSPA_SP_FWID_MASK	(0x3f << 20)
+#define	SSPA_SP_FWID(x)		((x) << 20)	/* Frame-Sync Width */
+#define	SSPA_TXSP_FPER_MASK	(0x3f << 4)
+#define	SSPA_TXSP_FPER(x)	((x) << 4)	/* Frame-Sync Active */
+
+/* sspa clock sources */
+#define MMP_SSPA_CLK_PLL	0
+#define MMP_SSPA_CLK_VCXO	1
+#define MMP_SSPA_CLK_AUDIO	3
+
+/* sspa pll id */
+#define MMP_SYSCLK		0
+#define MMP_SSPA_CLK		1
+
+#endif /* _MMP_SSPA_H */