diff options
Diffstat (limited to '')
44 files changed, 3059 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio new file mode 100644 index 000000000..53f07fc41 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -0,0 +1,1804 @@ +What: /sys/bus/iio/devices/iio:deviceX +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Hardware chip or device accessed by one communication port. + Corresponds to a grouping of sensor channels. X is the IIO + index of the device. + +What: /sys/bus/iio/devices/triggerX +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + An event driven driver of data capture to an in kernel buffer. + May be provided by a device driver that also has an IIO device + based on hardware generated events (e.g. data ready) or + provided by a separate driver for other hardware (e.g. + periodic timer, GPIO or high resolution timer). + + Contains trigger type specific elements. These do not + generalize well and hence are not documented in this file. + X is the IIO index of the trigger. + +What: /sys/bus/iio/devices/iio:deviceX/buffer +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Directory of attributes relating to the buffer for the device. + +What: /sys/bus/iio/devices/iio:deviceX/name +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Description of the physical chip / device for device X. + Typically a part number. + +What: /sys/bus/iio/devices/iio:deviceX/current_timestamp_clock +KernelVersion: 4.5 +Contact: linux-iio@vger.kernel.org +Description: + String identifying current posix clock used to timestamp + buffered samples and events for device X. + +What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency +What: /sys/bus/iio/devices/iio:deviceX/buffer/sampling_frequency +What: /sys/bus/iio/devices/triggerX/sampling_frequency +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Some devices have internal clocks. This parameter sets the + resulting sampling frequency. In many devices this + parameter has an effect on input filters etc. rather than + simply controlling when the input is sampled. As this + affects data ready triggers, hardware buffers and the sysfs + direct access interfaces, it may be found in any of the + relevant directories. If it affects all of the above + then it is to be found in the base device directory. + +What: /sys/bus/iio/devices/iio:deviceX/sampling_frequency_available +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_sampling_frequency_available +What: /sys/bus/iio/devices/iio:deviceX/in_proximity_sampling_frequency_available +What: /sys/.../iio:deviceX/buffer/sampling_frequency_available +What: /sys/bus/iio/devices/triggerX/sampling_frequency_available +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + When the internal sampling clock can only take a specific set of + frequencies, we can specify the available values with: + + - a small discrete set of values like "0 2 4 6 8" + - a range with minimum, step and maximum frequencies like + "[min step max]" + +What: /sys/bus/iio/devices/iio:deviceX/oversampling_ratio +KernelVersion: 2.6.38 +Contact: linux-iio@vger.kernel.org +Description: + Hardware dependent ADC oversampling. Controls the sampling ratio + of the digital filter if available. + +What: /sys/bus/iio/devices/iio:deviceX/oversampling_ratio_available +KernelVersion: 2.6.38 +Contact: linux-iio@vger.kernel.org +Description: + Hardware dependent values supported by the oversampling filter. + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_raw +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_raw +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_raw +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_raw +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Raw (unscaled no bias removal etc.) voltage measurement from + channel Y. In special cases where the channel does not + correspond to externally available input one of the named + versions may be used. The number must always be specified and + unique to allow association with event codes. Units after + application of scale and offset are millivolts. + + Channels with 'i' and 'q' modifiers always exist in pairs and both + channels refer to the same signal. The 'i' channel contains the in-phase + component of the signal while the 'q' channel contains the quadrature + component. + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_raw +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Raw (unscaled) differential voltage measurement equivalent to + channel Y - channel Z where these channel numbers apply to the + physically equivalent inputs when non differential readings are + separately available. In differential only parts, then all that + is required is a consistent labeling. Units after application + of scale and offset are millivolts. + +What: /sys/bus/iio/devices/iio:deviceX/in_currentY_raw +What: /sys/bus/iio/devices/iio:deviceX/in_currentY_supply_raw +KernelVersion: 3.17 +Contact: linux-iio@vger.kernel.org +Description: + Raw (unscaled no bias removal etc.) current measurement from + channel Y. In special cases where the channel does not + correspond to externally available input one of the named + versions may be used. The number must always be specified and + unique to allow association with event codes. Units after + application of scale and offset are milliamps. + +What: /sys/bus/iio/devices/iio:deviceX/in_powerY_raw +KernelVersion: 4.5 +Contact: linux-iio@vger.kernel.org +Description: + Raw (unscaled no bias removal etc.) power measurement from + channel Y. The number must always be specified and + unique to allow association with event codes. Units after + application of scale and offset are milliwatts. + +What: /sys/bus/iio/devices/iio:deviceX/in_capacitanceY_raw +KernelVersion: 3.2 +Contact: linux-iio@vger.kernel.org +Description: + Raw capacitance measurement from channel Y. Units after + application of scale and offset are nanofarads. + +What: /sys/.../iio:deviceX/in_capacitanceY-capacitanceZ_raw +KernelVersion: 3.2 +Contact: linux-iio@vger.kernel.org +Description: + Raw differential capacitance measurement equivalent to + channel Y - channel Z where these channel numbers apply to the + physically equivalent inputs when non differential readings are + separately available. In differential only parts, then all that + is required is a consistent labeling. Units after application + of scale and offset are nanofarads. + +What: /sys/bus/iio/devices/iio:deviceX/in_temp_raw +What: /sys/bus/iio/devices/iio:deviceX/in_tempX_raw +What: /sys/bus/iio/devices/iio:deviceX/in_temp_x_raw +What: /sys/bus/iio/devices/iio:deviceX/in_temp_y_raw +What: /sys/bus/iio/devices/iio:deviceX/in_temp_ambient_raw +What: /sys/bus/iio/devices/iio:deviceX/in_temp_object_raw +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Raw (unscaled no bias removal etc.) temperature measurement. + If an axis is specified it generally means that the temperature + sensor is associated with one part of a compound device (e.g. + a gyroscope axis). The ambient and object modifiers distinguish + between ambient (reference) and distant temperature for contact- + less measurements. Units after application of scale and offset + are milli degrees Celsius. + +What: /sys/bus/iio/devices/iio:deviceX/in_tempX_input +KernelVersion: 2.6.38 +Contact: linux-iio@vger.kernel.org +Description: + Scaled temperature measurement in milli degrees Celsius. + +What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_raw +What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_raw +What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_raw +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Acceleration in direction x, y or z (may be arbitrarily assigned + but should match other such assignments on device). + Has all of the equivalent parameters as per voltageY. Units + after application of scale and offset are m/s^2. + +What: /sys/bus/iio/devices/iio:deviceX/in_gravity_x_raw +What: /sys/bus/iio/devices/iio:deviceX/in_gravity_y_raw +What: /sys/bus/iio/devices/iio:deviceX/in_gravity_z_raw +KernelVersion: 4.11 +Contact: linux-iio@vger.kernel.org +Description: + Gravity in direction x, y or z (may be arbitrarily assigned + but should match other such assignments on device). + Units after application of scale and offset are m/s^2. + +What: /sys/bus/iio/devices/iio:deviceX/in_angl_raw +KernelVersion: 4.17 +Contact: linux-iio@vger.kernel.org +Description: + Angle of rotation. Units after application of scale and offset + are radians. + +What: /sys/bus/iio/devices/iio:deviceX/in_positionrelative_x_raw +What: /sys/bus/iio/devices/iio:deviceX/in_positionrelative_y_raw +KernelVersion: 4.19 +Contact: linux-iio@vger.kernel.org +Description: + Relative position in direction x or y on a pad (may be + arbitrarily assigned but should match other such assignments on + device). + Units after application of scale and offset are milli percents + from the pad's size in both directions. Should be calibrated by + the consumer. + +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_raw +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_raw +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_raw +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Angular velocity about axis x, y or z (may be arbitrarily + assigned). Has all the equivalent parameters as per voltageY. + Units after application of scale and offset are radians per + second. + +What: /sys/bus/iio/devices/iio:deviceX/in_incli_x_raw +What: /sys/bus/iio/devices/iio:deviceX/in_incli_y_raw +What: /sys/bus/iio/devices/iio:deviceX/in_incli_z_raw +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Inclination raw reading about axis x, y or z (may be + arbitrarily assigned). Data converted by application of offset + and scale to degrees. + +What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_raw +What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_raw +What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_raw +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Magnetic field along axis x, y or z (may be arbitrarily + assigned). Data converted by application of offset + then scale to Gauss. + +What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_peak_raw +What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_peak_raw +What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_peak_raw +KernelVersion: 2.6.36 +Contact: linux-iio@vger.kernel.org +Description: + Highest value since some reset condition. These + attributes allow access to this and are otherwise + the direct equivalent of the <type>Y[_name]_raw attributes. + +What: /sys/bus/iio/devices/iio:deviceX/in_accel_xyz_squared_peak_raw +KernelVersion: 2.6.36 +Contact: linux-iio@vger.kernel.org +Description: + A computed peak value based on the sum squared magnitude of + the underlying value in the specified directions. + +What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_raw +What: /sys/bus/iio/devices/iio:deviceX/in_pressure_raw +KernelVersion: 3.8 +Contact: linux-iio@vger.kernel.org +Description: + Raw pressure measurement from channel Y. Units after + application of scale and offset are kilopascal. + +What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_input +What: /sys/bus/iio/devices/iio:deviceX/in_pressure_input +KernelVersion: 3.8 +Contact: linux-iio@vger.kernel.org +Description: + Scaled pressure measurement from channel Y, in kilopascal. + +What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_raw +KernelVersion: 3.14 +Contact: linux-iio@vger.kernel.org +Description: + Raw humidity measurement of air. Units after application of + scale and offset are milli percent. + +What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_input +KernelVersion: 3.14 +Contact: linux-iio@vger.kernel.org +Description: + Scaled humidity measurement in milli percent. + +What: /sys/bus/iio/devices/iio:deviceX/in_X_mean_raw +KernelVersion: 3.5 +Contact: linux-iio@vger.kernel.org +Description: + Averaged raw measurement from channel X. The number of values + used for averaging is device specific. The converting rules for + normal raw values also applies to the averaged raw values. + +What: /sys/bus/iio/devices/iio:deviceX/in_accel_offset +What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_offset +What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_offset +What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_offset +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_offset +What: /sys/bus/iio/devices/iio:deviceX/in_voltage_offset +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_offset +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_offset +What: /sys/bus/iio/devices/iio:deviceX/in_voltage_q_offset +What: /sys/bus/iio/devices/iio:deviceX/in_voltage_i_offset +What: /sys/bus/iio/devices/iio:deviceX/in_currentY_offset +What: /sys/bus/iio/devices/iio:deviceX/in_current_offset +What: /sys/bus/iio/devices/iio:deviceX/in_currentY_i_offset +What: /sys/bus/iio/devices/iio:deviceX/in_currentY_q_offset +What: /sys/bus/iio/devices/iio:deviceX/in_current_q_offset +What: /sys/bus/iio/devices/iio:deviceX/in_current_i_offset +What: /sys/bus/iio/devices/iio:deviceX/in_tempY_offset +What: /sys/bus/iio/devices/iio:deviceX/in_temp_offset +What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_offset +What: /sys/bus/iio/devices/iio:deviceX/in_pressure_offset +What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_offset +What: /sys/bus/iio/devices/iio:deviceX/in_magn_offset +What: /sys/bus/iio/devices/iio:deviceX/in_rot_offset +What: /sys/bus/iio/devices/iio:deviceX/in_angl_offset +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + If known for a device, offset to be added to <type>[Y]_raw prior + to scaling by <type>[Y]_scale in order to obtain value in the + <type> units as specified in <type>[Y]_raw documentation. + Not present if the offset is always 0 or unknown. If Y or + axis <x|y|z> is not present, then the offset applies to all + in channels of <type>. + May be writable if a variable offset can be applied on the + device. Note that this is different to calibbias which + is for devices (or drivers) that apply offsets to compensate + for variation between different instances of the part, typically + adjusted by using some hardware supported calibration procedure. + Calibbias is applied internally, offset is applied in userspace + to the _raw output. + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_scale +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_scale +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_scale +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale +What: /sys/bus/iio/devices/iio:deviceX/in_voltage_scale +What: /sys/bus/iio/devices/iio:deviceX/in_voltage_i_scale +What: /sys/bus/iio/devices/iio:deviceX/in_voltage_q_scale +What: /sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_scale +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale +What: /sys/bus/iio/devices/iio:deviceX/in_currentY_scale +What: /sys/bus/iio/devices/iio:deviceX/in_currentY_supply_scale +What: /sys/bus/iio/devices/iio:deviceX/in_current_scale +What: /sys/bus/iio/devices/iio:deviceX/in_currentY_i_scale +What: /sys/bus/iio/devices/iio:deviceX/in_currentY_q_scale +What: /sys/bus/iio/devices/iio:deviceX/in_current_i_scale +What: /sys/bus/iio/devices/iio:deviceX/in_current_q_scale +What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale +What: /sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_scale +What: /sys/bus/iio/devices/iio:deviceX/in_energy_scale +What: /sys/bus/iio/devices/iio:deviceX/in_distance_scale +What: /sys/bus/iio/devices/iio:deviceX/in_magn_scale +What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_scale +What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_scale +What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_scale +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_scale +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_scale +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_scale +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_scale +What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_scale +What: /sys/bus/iio/devices/iio:deviceX/in_pressure_scale +What: /sys/bus/iio/devices/iio:deviceX/in_humidityrelative_scale +What: /sys/bus/iio/devices/iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_scale +What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_scale +What: /sys/bus/iio/devices/iio:deviceX/in_countY_scale +What: /sys/bus/iio/devices/iio:deviceX/in_angl_scale +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_x_scale +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_y_scale +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_z_scale +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + If known for a device, scale to be applied to <type>Y[_name]_raw + post addition of <type>[Y][_name]_offset in order to obtain the + measured value in <type> units as specified in + <type>[Y][_name]_raw documentation. If shared across all in + channels then Y and <x|y|z> are not present and the value is + called <type>[Y][_name]_scale. The peak modifier means this + value is applied to <type>Y[_name]_peak_raw values. + +What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibbias +What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibbias +What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibbias +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibbias +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibbias +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias +What: /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibbias +What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibbias +What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_calibbias +What: /sys/bus/iio/devices/iio:deviceX/in_pressure_calibbias +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Hardware applied calibration offset (assumed to fix production + inaccuracies). + +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_voltage_i_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_voltage_q_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_pressure_calibscale +What: /sys/bus/iio/devices/iio:deviceX/in_illuminance_calibscale +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Hardware applied calibration scale factor (assumed to fix + production inaccuracies). If shared across all channels, + <type>_calibscale is used. + +What: /sys/bus/iio/devices/iio:deviceX/in_activity_calibgender +What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibgender +What: /sys/bus/iio/devices/iio:deviceX/in_distance_calibgender +What: /sys/bus/iio/devices/iio:deviceX/in_velocity_calibgender +KernelVersion: 4.0 +Contact: linux-iio@vger.kernel.org +Description: + Gender of the user (e.g.: male, female) used by some pedometers + to compute the stride length, distance, speed and activity + type. + +What: /sys/bus/iio/devices/iio:deviceX/in_activity_calibgender_available +What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibgender_available +What: /sys/bus/iio/devices/iio:deviceX/in_distance_calibgender_available +What: /sys/bus/iio/devices/iio:deviceX/in_velocity_calibgender_available +KernelVersion: 4.0 +Contact: linux-iio@vger.kernel.org +Description: + Lists all available gender values (e.g.: male, female). + +What: /sys/bus/iio/devices/iio:deviceX/in_activity_calibheight +What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibheight +What: /sys/bus/iio/devices/iio:deviceX/in_distance_calibheight +What: /sys/bus/iio/devices/iio:deviceX/in_velocity_calibheight +KernelVersion: 3.19 +Contact: linux-iio@vger.kernel.org +Description: + Height of the user (in meters) used by some pedometers + to compute the stride length, distance, speed and activity + type. + +What: /sys/bus/iio/devices/iio:deviceX/in_energy_calibweight +KernelVersion: 4.0 +Contact: linux-iio@vger.kernel.org +Description: + Weight of the user (in kg). It is needed by some pedometers + to compute the calories burnt by the user. + +What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale_available +What: /sys/.../iio:deviceX/in_anglvel_scale_available +What: /sys/.../iio:deviceX/in_magn_scale_available +What: /sys/.../iio:deviceX/in_illuminance_scale_available +What: /sys/.../iio:deviceX/in_intensity_scale_available +What: /sys/.../iio:deviceX/in_proximity_scale_available +What: /sys/.../iio:deviceX/in_voltageX_scale_available +What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available +What: /sys/.../iio:deviceX/out_voltageX_scale_available +What: /sys/.../iio:deviceX/out_altvoltageX_scale_available +What: /sys/.../iio:deviceX/in_capacitance_scale_available +What: /sys/.../iio:deviceX/in_pressure_scale_available +What: /sys/.../iio:deviceX/in_pressureY_scale_available +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + If a discrete set of scale values is available, they + are listed in this attribute. + +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_hardwaregain +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_red_hardwaregain +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_green_hardwaregain +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_blue_hardwaregain +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_clear_hardwaregain +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Hardware applied gain factor. If shared across all channels, + <type>_hardwaregain is used. + +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_hardwaregain_available +KernelVersion: 5.10 +Contact: linux-iio@vger.kernel.org +Description: + Lists all available hardware applied gain factors. Shared across all + channels. + +What: /sys/.../in_accel_filter_low_pass_3db_frequency +What: /sys/.../in_magn_filter_low_pass_3db_frequency +What: /sys/.../in_anglvel_filter_low_pass_3db_frequency +KernelVersion: 3.2 +Contact: linux-iio@vger.kernel.org +Description: + If a known or controllable low pass filter is applied + to the underlying data channel, then this parameter + gives the 3dB frequency of the filter in Hz. + +What: /sys/.../in_accel_filter_high_pass_3db_frequency +What: /sys/.../in_anglvel_filter_high_pass_3db_frequency +What: /sys/.../in_magn_filter_high_pass_3db_frequency +KernelVersion: 4.2 +Contact: linux-iio@vger.kernel.org +Description: + If a known or controllable high pass filter is applied + to the underlying data channel, then this parameter + gives the 3dB frequency of the filter in Hz. + +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Raw (unscaled, no bias etc.) output voltage for + channel Y. The number must always be specified and + unique if the output corresponds to a single channel. + While DAC like devices typically use out_voltage, + a continuous frequency generating device, such as + a DDS or PLL should use out_altvoltage. + +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Raw (unscaled, no bias etc.) output voltage for an aggregate of + channel Y, channel Z, etc. This interface is available in cases + where a single output sets the value for multiple channels + simultaneously. + +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode +What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode +KernelVersion: 2.6.38 +Contact: linux-iio@vger.kernel.org +Description: + Specifies the output powerdown mode. + DAC output stage is disconnected from the amplifier and + 1kohm_to_gnd: connected to ground via an 1kOhm resistor, + 2.5kohm_to_gnd: connected to ground via a 2.5kOhm resistor, + 6kohm_to_gnd: connected to ground via a 6kOhm resistor, + 20kohm_to_gnd: connected to ground via a 20kOhm resistor, + 90kohm_to_gnd: connected to ground via a 90kOhm resistor, + 100kohm_to_gnd: connected to ground via an 100kOhm resistor, + 125kohm_to_gnd: connected to ground via an 125kOhm resistor, + 500kohm_to_gnd: connected to ground via a 500kOhm resistor, + 640kohm_to_gnd: connected to ground via a 640kOhm resistor, + three_state: left floating. + For a list of available output power down options read + outX_powerdown_mode_available. If Y is not present the + mode is shared across all outputs. + +What: /sys/.../iio:deviceX/out_voltageY_powerdown_mode_available +What: /sys/.../iio:deviceX/out_voltage_powerdown_mode_available +What: /sys/.../iio:deviceX/out_altvoltageY_powerdown_mode_available +What: /sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available +KernelVersion: 2.6.38 +Contact: linux-iio@vger.kernel.org +Description: + Lists all available output power down modes. + If Y is not present the mode is shared across all outputs. + +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown +What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown +KernelVersion: 2.6.38 +Contact: linux-iio@vger.kernel.org +Description: + Writing 1 causes output Y to enter the power down mode specified + by the corresponding outY_powerdown_mode. DAC output stage is + disconnected from the amplifier. Clearing returns to normal + operation. Y may be suppressed if all outputs are controlled + together. + +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency +KernelVersion: 3.4.0 +Contact: linux-iio@vger.kernel.org +Description: + Output frequency for channel Y in Hz. The number must always be + specified and unique if the output corresponds to a single + channel. + +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase +KernelVersion: 3.4.0 +Contact: linux-iio@vger.kernel.org +Description: + Phase in radians of one frequency/clock output Y + (out_altvoltageY) relative to another frequency/clock output + (out_altvoltageZ) of the device X. The number must always be + specified and unique if the output corresponds to a single + channel. + +What: /sys/bus/iio/devices/iio:deviceX/events +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Configuration of which hardware generated events are passed up + to user-space. + +What: /sys/.../iio:deviceX/events/in_accel_x_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_accel_x_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_accel_y_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_accel_y_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_accel_z_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_accel_z_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_anglvel_x_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_anglvel_x_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_anglvel_y_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_anglvel_y_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_anglvel_z_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_anglvel_z_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_magn_x_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_magn_x_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_magn_y_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_magn_y_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_magn_z_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_magn_z_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_voltageY_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_voltageY_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_voltageY_thresh_either_en +What: /sys/.../iio:deviceX/events/in_tempY_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_tempY_thresh_falling_en +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Event generated when channel passes a threshold in the specified + (_rising|_falling) direction. If the direction is not specified, + then either the device will report an event which ever direction + a single threshold value is passed in (e.g. + <type>[Y][_name]_<raw|input>_thresh_value) or + <type>[Y][_name]_<raw|input>_thresh_rising_value and + <type>[Y][_name]_<raw|input>_thresh_falling_value may take + different values, but the device can only enable both thresholds + or neither. + + Note the driver will assume the last p events requested are + to be enabled where p is how many it supports (which may vary + depending on the exact set requested. So if you want to be + sure you have set what you think you have, check the contents of + these attributes after everything is configured. Drivers may + have to buffer any parameters so that they are consistent when + a given event type is enabled at a future point (and not those for + whatever event was previously enabled). + +What: /sys/.../iio:deviceX/events/in_accel_x_roc_rising_en +What: /sys/.../iio:deviceX/events/in_accel_x_roc_falling_en +What: /sys/.../iio:deviceX/events/in_accel_y_roc_rising_en +What: /sys/.../iio:deviceX/events/in_accel_y_roc_falling_en +What: /sys/.../iio:deviceX/events/in_accel_z_roc_rising_en +What: /sys/.../iio:deviceX/events/in_accel_z_roc_falling_en +What: /sys/.../iio:deviceX/events/in_anglvel_x_roc_rising_en +What: /sys/.../iio:deviceX/events/in_anglvel_x_roc_falling_en +What: /sys/.../iio:deviceX/events/in_anglvel_y_roc_rising_en +What: /sys/.../iio:deviceX/events/in_anglvel_y_roc_falling_en +What: /sys/.../iio:deviceX/events/in_anglvel_z_roc_rising_en +What: /sys/.../iio:deviceX/events/in_anglvel_z_roc_falling_en +What: /sys/.../iio:deviceX/events/in_magn_x_roc_rising_en +What: /sys/.../iio:deviceX/events/in_magn_x_roc_falling_en +What: /sys/.../iio:deviceX/events/in_magn_y_roc_rising_en +What: /sys/.../iio:deviceX/events/in_magn_y_roc_falling_en +What: /sys/.../iio:deviceX/events/in_magn_z_roc_rising_en +What: /sys/.../iio:deviceX/events/in_magn_z_roc_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_roc_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_roc_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_falling_en +What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_rising_en +What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_falling_en +What: /sys/.../iio:deviceX/events/in_voltageY_roc_rising_en +What: /sys/.../iio:deviceX/events/in_voltageY_roc_falling_en +What: /sys/.../iio:deviceX/events/in_tempY_roc_rising_en +What: /sys/.../iio:deviceX/events/in_tempY_roc_falling_en +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Event generated when channel passes a threshold on the rate of + change (1st differential) in the specified (_rising|_falling) + direction. If the direction is not specified, then either the + device will report an event which ever direction a single + threshold value is passed in (e.g. + <type>[Y][_name]_<raw|input>_roc_value) or + <type>[Y][_name]_<raw|input>_roc_rising_value and + <type>[Y][_name]_<raw|input>_roc_falling_value may take + different values, but the device can only enable both rate of + change thresholds or neither. + + Note the driver will assume the last p events requested are + to be enabled where p is however many it supports (which may + vary depending on the exact set requested. So if you want to be + sure you have set what you think you have, check the contents of + these attributes after everything is configured. Drivers may + have to buffer any parameters so that they are consistent when + a given event type is enabled a future point (and not those for + whatever event was previously enabled). + +What: /sys/.../events/in_accel_thresh_rising_value +What: /sys/.../events/in_accel_thresh_falling_value +What: /sys/.../events/in_accel_x_raw_thresh_rising_value +What: /sys/.../events/in_accel_x_raw_thresh_falling_value +What: /sys/.../events/in_accel_y_raw_thresh_rising_value +What: /sys/.../events/in_accel_y_raw_thresh_falling_value +What: /sys/.../events/in_accel_z_raw_thresh_rising_value +What: /sys/.../events/in_accel_z_raw_thresh_falling_value +What: /sys/.../events/in_anglvel_x_raw_thresh_rising_value +What: /sys/.../events/in_anglvel_x_raw_thresh_falling_value +What: /sys/.../events/in_anglvel_y_raw_thresh_rising_value +What: /sys/.../events/in_anglvel_y_raw_thresh_falling_value +What: /sys/.../events/in_anglvel_z_raw_thresh_rising_value +What: /sys/.../events/in_anglvel_z_raw_thresh_falling_value +What: /sys/.../events/in_magn_x_raw_thresh_rising_value +What: /sys/.../events/in_magn_x_raw_thresh_falling_value +What: /sys/.../events/in_magn_y_raw_thresh_rising_value +What: /sys/.../events/in_magn_y_raw_thresh_falling_value +What: /sys/.../events/in_magn_z_raw_thresh_rising_value +What: /sys/.../events/in_magn_z_raw_thresh_falling_value +What: /sys/.../events/in_rot_from_north_magnetic_raw_thresh_rising_value +What: /sys/.../events/in_rot_from_north_magnetic_raw_thresh_falling_value +What: /sys/.../events/in_rot_from_north_true_raw_thresh_rising_value +What: /sys/.../events/in_rot_from_north_true_raw_thresh_falling_value +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_rising_value +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_falling_value +What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_rising_value +What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_falling_value +What: /sys/.../events/in_voltageY_supply_raw_thresh_rising_value +What: /sys/.../events/in_voltageY_supply_raw_thresh_falling_value +What: /sys/.../events/in_voltageY_raw_thresh_rising_value +What: /sys/.../events/in_voltageY_raw_thresh_falling_value +What: /sys/.../events/in_tempY_raw_thresh_rising_value +What: /sys/.../events/in_tempY_raw_thresh_falling_value +What: /sys/.../events/in_illuminance0_thresh_falling_value +What: /sys/.../events/in_illuminance0_thresh_rising_value +What: /sys/.../events/in_proximity0_thresh_falling_value +What: /sys/.../events/in_proximity0_thresh_rising_value +What: /sys/.../events/in_illuminance_thresh_rising_value +What: /sys/.../events/in_illuminance_thresh_falling_value +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Specifies the value of threshold that the device is comparing + against for the events enabled by + <type>Y[_name]_thresh[_rising|falling]_en. + + If separate attributes exist for the two directions, but + direction is not specified for this attribute, then a single + threshold value applies to both directions. + + The raw or input element of the name indicates whether the + value is in raw device units or in processed units (as _raw + and _input do on sysfs direct channel read attributes). + +What: /sys/.../events/in_accel_scale +What: /sys/.../events/in_accel_peak_scale +What: /sys/.../events/in_anglvel_scale +What: /sys/.../events/in_magn_scale +What: /sys/.../events/in_rot_from_north_magnetic_scale +What: /sys/.../events/in_rot_from_north_true_scale +What: /sys/.../events/in_voltage_scale +What: /sys/.../events/in_voltage_supply_scale +What: /sys/.../events/in_temp_scale +What: /sys/.../events/in_illuminance_scale +What: /sys/.../events/in_proximity_scale +KernelVersion: 3.21 +Contact: linux-iio@vger.kernel.org +Description: + Specifies the conversion factor from the standard units + to device specific units used to set the event trigger + threshold. + +What: /sys/.../events/in_accel_x_thresh_rising_hysteresis +What: /sys/.../events/in_accel_x_thresh_falling_hysteresis +What: /sys/.../events/in_accel_x_thresh_either_hysteresis +What: /sys/.../events/in_accel_y_thresh_rising_hysteresis +What: /sys/.../events/in_accel_y_thresh_falling_hysteresis +What: /sys/.../events/in_accel_y_thresh_either_hysteresis +What: /sys/.../events/in_accel_z_thresh_rising_hysteresis +What: /sys/.../events/in_accel_z_thresh_falling_hysteresis +What: /sys/.../events/in_accel_z_thresh_either_hysteresis +What: /sys/.../events/in_anglvel_x_thresh_rising_hysteresis +What: /sys/.../events/in_anglvel_x_thresh_falling_hysteresis +What: /sys/.../events/in_anglvel_x_thresh_either_hysteresis +What: /sys/.../events/in_anglvel_y_thresh_rising_hysteresis +What: /sys/.../events/in_anglvel_y_thresh_falling_hysteresis +What: /sys/.../events/in_anglvel_y_thresh_either_hysteresis +What: /sys/.../events/in_anglvel_z_thresh_rising_hysteresis +What: /sys/.../events/in_anglvel_z_thresh_falling_hysteresis +What: /sys/.../events/in_anglvel_z_thresh_either_hysteresis +What: /sys/.../events/in_magn_x_thresh_rising_hysteresis +What: /sys/.../events/in_magn_x_thresh_falling_hysteresis +What: /sys/.../events/in_magn_x_thresh_either_hysteresis +What: /sys/.../events/in_magn_y_thresh_rising_hysteresis +What: /sys/.../events/in_magn_y_thresh_falling_hysteresis +What: /sys/.../events/in_magn_y_thresh_either_hysteresis +What: /sys/.../events/in_magn_z_thresh_rising_hysteresis +What: /sys/.../events/in_magn_z_thresh_falling_hysteresis +What: /sys/.../events/in_magn_z_thresh_either_hysteresis +What: /sys/.../events/in_rot_from_north_magnetic_thresh_rising_hysteresis +What: /sys/.../events/in_rot_from_north_magnetic_thresh_falling_hysteresis +What: /sys/.../events/in_rot_from_north_magnetic_thresh_either_hysteresis +What: /sys/.../events/in_rot_from_north_true_thresh_rising_hysteresis +What: /sys/.../events/in_rot_from_north_true_thresh_falling_hysteresis +What: /sys/.../events/in_rot_from_north_true_thresh_either_hysteresis +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_hysteresis +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_hysteresis +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_either_hysteresis +What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_hysteresis +What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_hysteresis +What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_either_hysteresis +What: /sys/.../events/in_voltageY_thresh_rising_hysteresis +What: /sys/.../events/in_voltageY_thresh_falling_hysteresis +What: /sys/.../events/in_voltageY_thresh_either_hysteresis +What: /sys/.../events/in_tempY_thresh_rising_hysteresis +What: /sys/.../events/in_tempY_thresh_falling_hysteresis +What: /sys/.../events/in_tempY_thresh_either_hysteresis +What: /sys/.../events/in_illuminance0_thresh_falling_hysteresis +What: /sys/.../events/in_illuminance0_thresh_rising_hysteresis +What: /sys/.../events/in_illuminance0_thresh_either_hysteresis +What: /sys/.../events/in_proximity0_thresh_falling_hysteresis +What: /sys/.../events/in_proximity0_thresh_rising_hysteresis +What: /sys/.../events/in_proximity0_thresh_either_hysteresis +KernelVersion: 3.13 +Contact: linux-iio@vger.kernel.org +Description: + Specifies the hysteresis of threshold that the device is comparing + against for the events enabled by + <type>Y[_name]_thresh[_(rising|falling)]_hysteresis. + If separate attributes exist for the two directions, but + direction is not specified for this attribute, then a single + hysteresis value applies to both directions. + + For falling events the hysteresis is added to the _value attribute for + this event to get the upper threshold for when the event goes back to + normal, for rising events the hysteresis is subtracted from the _value + attribute. E.g. if in_voltage0_raw_thresh_rising_value is set to 1200 + and in_voltage0_raw_thresh_rising_hysteresis is set to 50. The event + will get activated once in_voltage0_raw goes above 1200 and will become + deactivated again once the value falls below 1150. + +What: /sys/.../events/in_accel_x_raw_roc_rising_value +What: /sys/.../events/in_accel_x_raw_roc_falling_value +What: /sys/.../events/in_accel_y_raw_roc_rising_value +What: /sys/.../events/in_accel_y_raw_roc_falling_value +What: /sys/.../events/in_accel_z_raw_roc_rising_value +What: /sys/.../events/in_accel_z_raw_roc_falling_value +What: /sys/.../events/in_anglvel_x_raw_roc_rising_value +What: /sys/.../events/in_anglvel_x_raw_roc_falling_value +What: /sys/.../events/in_anglvel_y_raw_roc_rising_value +What: /sys/.../events/in_anglvel_y_raw_roc_falling_value +What: /sys/.../events/in_anglvel_z_raw_roc_rising_value +What: /sys/.../events/in_anglvel_z_raw_roc_falling_value +What: /sys/.../events/in_magn_x_raw_roc_rising_value +What: /sys/.../events/in_magn_x_raw_roc_falling_value +What: /sys/.../events/in_magn_y_raw_roc_rising_value +What: /sys/.../events/in_magn_y_raw_roc_falling_value +What: /sys/.../events/in_magn_z_raw_roc_rising_value +What: /sys/.../events/in_magn_z_raw_roc_falling_value +What: /sys/.../events/in_rot_from_north_magnetic_raw_roc_rising_value +What: /sys/.../events/in_rot_from_north_magnetic_raw_roc_falling_value +What: /sys/.../events/in_rot_from_north_true_raw_roc_rising_value +What: /sys/.../events/in_rot_from_north_true_raw_roc_falling_value +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_rising_value +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_falling_value +What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_rising_value +What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_falling_value +What: /sys/.../events/in_voltageY_supply_raw_roc_rising_value +What: /sys/.../events/in_voltageY_supply_raw_roc_falling_value +What: /sys/.../events/in_voltageY_raw_roc_rising_value +What: /sys/.../events/in_voltageY_raw_roc_falling_value +What: /sys/.../events/in_tempY_raw_roc_rising_value +What: /sys/.../events/in_tempY_raw_roc_falling_value +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Specifies the value of rate of change threshold that the + device is comparing against for the events enabled by + <type>[Y][_name]_roc[_rising|falling]_en. + + If separate attributes exist for the two directions, + but direction is not specified for this attribute, + then a single threshold value applies to both directions. + The raw or input element of the name indicates whether the + value is in raw device units or in processed units (as _raw + and _input do on sysfs direct channel read attributes). + +What: /sys/.../events/in_accel_x_thresh_rising_period +What: /sys/.../events/in_accel_x_thresh_falling_period +What: /sys/.../events/in_accel_x_roc_rising_period +What: /sys/.../events/in_accel_x_roc_falling_period +What: /sys/.../events/in_accel_y_thresh_rising_period +What: /sys/.../events/in_accel_y_thresh_falling_period +What: /sys/.../events/in_accel_y_roc_rising_period +What: /sys/.../events/in_accel_y_roc_falling_period +What: /sys/.../events/in_accel_z_thresh_rising_period +What: /sys/.../events/in_accel_z_thresh_falling_period +What: /sys/.../events/in_accel_z_roc_rising_period +What: /sys/.../events/in_accel_z_roc_falling_period +What: /sys/.../events/in_anglvel_x_thresh_rising_period +What: /sys/.../events/in_anglvel_x_thresh_falling_period +What: /sys/.../events/in_anglvel_x_roc_rising_period +What: /sys/.../events/in_anglvel_x_roc_falling_period +What: /sys/.../events/in_anglvel_y_thresh_rising_period +What: /sys/.../events/in_anglvel_y_thresh_falling_period +What: /sys/.../events/in_anglvel_y_roc_rising_period +What: /sys/.../events/in_anglvel_y_roc_falling_period +What: /sys/.../events/in_anglvel_z_thresh_rising_period +What: /sys/.../events/in_anglvel_z_thresh_falling_period +What: /sys/.../events/in_anglvel_z_roc_rising_period +What: /sys/.../events/in_anglvel_z_roc_falling_period +What: /sys/.../events/in_magn_x_thresh_rising_period +What: /sys/.../events/in_magn_x_thresh_falling_period +What: /sys/.../events/in_magn_x_roc_rising_period +What: /sys/.../events/in_magn_x_roc_falling_period +What: /sys/.../events/in_magn_y_thresh_rising_period +What: /sys/.../events/in_magn_y_thresh_falling_period +What: /sys/.../events/in_magn_y_roc_rising_period +What: /sys/.../events/in_magn_y_roc_falling_period +What: /sys/.../events/in_magn_z_thresh_rising_period +What: /sys/.../events/in_magn_z_thresh_falling_period +What: /sys/.../events/in_magn_z_roc_rising_period +What: /sys/.../events/in_magn_z_roc_falling_period +What: /sys/.../events/in_rot_from_north_magnetic_thresh_rising_period +What: /sys/.../events/in_rot_from_north_magnetic_thresh_falling_period +What: /sys/.../events/in_rot_from_north_magnetic_roc_rising_period +What: /sys/.../events/in_rot_from_north_magnetic_roc_falling_period +What: /sys/.../events/in_rot_from_north_true_thresh_rising_period +What: /sys/.../events/in_rot_from_north_true_thresh_falling_period +What: /sys/.../events/in_rot_from_north_true_roc_rising_period +What: /sys/.../events/in_rot_from_north_true_roc_falling_period +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_period +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_period +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_rising_period +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_falling_period +What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_period +What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_period +What: /sys/.../events/in_rot_from_north_true_tilt_comp_roc_rising_period +What: /sys/.../events/in_rot_from_north_true_tilt_comp_roc_falling_period +What: /sys/.../events/in_voltageY_supply_thresh_rising_period +What: /sys/.../events/in_voltageY_supply_thresh_falling_period +What: /sys/.../events/in_voltageY_supply_roc_rising_period +What: /sys/.../events/in_voltageY_supply_roc_falling_period +What: /sys/.../events/in_voltageY_thresh_rising_period +What: /sys/.../events/in_voltageY_thresh_falling_period +What: /sys/.../events/in_voltageY_roc_rising_period +What: /sys/.../events/in_voltageY_roc_falling_period +What: /sys/.../events/in_tempY_thresh_rising_period +What: /sys/.../events/in_tempY_thresh_falling_period +What: /sys/.../events/in_tempY_roc_rising_period +What: /sys/.../events/in_tempY_roc_falling_period +What: /sys/.../events/in_accel_x&y&z_mag_falling_period +What: /sys/.../events/in_intensity0_thresh_period +What: /sys/.../events/in_proximity0_thresh_period +What: /sys/.../events/in_activity_still_thresh_rising_period +What: /sys/.../events/in_activity_still_thresh_falling_period +What: /sys/.../events/in_activity_walking_thresh_rising_period +What: /sys/.../events/in_activity_walking_thresh_falling_period +What: /sys/.../events/in_activity_jogging_thresh_rising_period +What: /sys/.../events/in_activity_jogging_thresh_falling_period +What: /sys/.../events/in_activity_running_thresh_rising_period +What: /sys/.../events/in_activity_running_thresh_falling_period +What: /sys/.../events/in_illuminance_thresh_either_period +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Period of time (in seconds) for which the condition must be + met before an event is generated. If direction is not + specified then this period applies to both directions. + +What: /sys/.../events/in_accel_thresh_rising_low_pass_filter_3db +What: /sys/.../events/in_anglvel_thresh_rising_low_pass_filter_3db +What: /sys/.../events/in_magn_thresh_rising_low_pass_filter_3db +KernelVersion: 4.2 +Contact: linux-iio@vger.kernel.org +Description: + If a low pass filter can be applied to the event generation + this property gives its 3db frequency in Hz. + A value of zero disables the filter. + +What: /sys/.../events/in_accel_thresh_rising_high_pass_filter_3db +What: /sys/.../events/in_anglvel_thresh_rising_high_pass_filter_3db +What: /sys/.../events/in_magn_thresh_rising_high_pass_filter_3db +KernelVersion: 4.2 +Contact: linux-iio@vger.kernel.org +Description: + If a high pass filter can be applied to the event generation + this property gives its 3db frequency in Hz. + A value of zero disables the filter. + +What: /sys/.../events/in_activity_still_thresh_rising_en +What: /sys/.../events/in_activity_still_thresh_falling_en +What: /sys/.../events/in_activity_walking_thresh_rising_en +What: /sys/.../events/in_activity_walking_thresh_falling_en +What: /sys/.../events/in_activity_jogging_thresh_rising_en +What: /sys/.../events/in_activity_jogging_thresh_falling_en +What: /sys/.../events/in_activity_running_thresh_rising_en +What: /sys/.../events/in_activity_running_thresh_falling_en +KernelVersion: 3.19 +Contact: linux-iio@vger.kernel.org +Description: + Enables or disables activity events. Depending on direction + an event is generated when sensor ENTERS or LEAVES a given state. + +What: /sys/.../events/in_activity_still_thresh_rising_value +What: /sys/.../events/in_activity_still_thresh_falling_value +What: /sys/.../events/in_activity_walking_thresh_rising_value +What: /sys/.../events/in_activity_walking_thresh_falling_value +What: /sys/.../events/in_activity_jogging_thresh_rising_value +What: /sys/.../events/in_activity_jogging_thresh_falling_value +What: /sys/.../events/in_activity_running_thresh_rising_value +What: /sys/.../events/in_activity_running_thresh_falling_value +KernelVersion: 3.19 +Contact: linux-iio@vger.kernel.org +Description: + Confidence value (in units as percentage) to be used + for deciding when an event should be generated. E.g for + running: If the confidence value reported by the sensor + is greater than in_activity_running_thresh_rising_value + then the sensor ENTERS running state. Conversely, if the + confidence value reported by the sensor is lower than + in_activity_running_thresh_falling_value then the sensor + is LEAVING running state. + +What: /sys/.../iio:deviceX/events/in_accel_mag_en +What: /sys/.../iio:deviceX/events/in_accel_mag_rising_en +What: /sys/.../iio:deviceX/events/in_accel_mag_falling_en +What: /sys/.../iio:deviceX/events/in_accel_x_mag_en +What: /sys/.../iio:deviceX/events/in_accel_x_mag_rising_en +What: /sys/.../iio:deviceX/events/in_accel_x_mag_falling_en +What: /sys/.../iio:deviceX/events/in_accel_y_mag_en +What: /sys/.../iio:deviceX/events/in_accel_y_mag_rising_en +What: /sys/.../iio:deviceX/events/in_accel_y_mag_falling_en +What: /sys/.../iio:deviceX/events/in_accel_z_mag_en +What: /sys/.../iio:deviceX/events/in_accel_z_mag_rising_en +What: /sys/.../iio:deviceX/events/in_accel_z_mag_falling_en +What: /sys/.../iio:deviceX/events/in_accel_x&y&z_mag_rising_en +What: /sys/.../iio:deviceX/events/in_accel_x&y&z_mag_falling_en +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Similar to in_accel_x_thresh[_rising|_falling]_en, but here the + magnitude of the channel is compared to the threshold, not its + signed value. + +What: /sys/.../events/in_accel_raw_mag_value +What: /sys/.../events/in_accel_x_raw_mag_rising_value +What: /sys/.../events/in_accel_y_raw_mag_rising_value +What: /sys/.../events/in_accel_z_raw_mag_rising_value +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + The value to which the magnitude of the channel is compared. If + number or direction is not specified, applies to all channels of + this type. + +What: /sys/.../events/in_steps_change_en +KernelVersion: 4.0 +Contact: linux-iio@vger.kernel.org +Description: + Event generated when channel passes a threshold on the absolute + change in value. E.g. for steps: a step change event is + generated each time the user takes N steps, where N is set using + in_steps_change_value. + +What: /sys/.../events/in_steps_change_value +KernelVersion: 4.0 +Contact: linux-iio@vger.kernel.org +Description: + Specifies the value of change threshold that the + device is comparing against for the events enabled by + <type>[Y][_name]_roc[_rising|falling|]_en. E.g. for steps: + if set to 3, a step change event will be generated every 3 + steps. + +What: /sys/bus/iio/devices/iio:deviceX/trigger/current_trigger +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + The name of the trigger source being used, as per string given + in /sys/class/iio/triggerY/name. + +What: /sys/bus/iio/devices/iio:deviceX/buffer/length +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Number of scans contained by the buffer. + +What: /sys/bus/iio/devices/iio:deviceX/buffer/enable +KernelVersion: 2.6.35 +Contact: linux-iio@vger.kernel.org +Description: + Actually start the buffer capture up. Will start trigger + if first device and appropriate. + +What: /sys/bus/iio/devices/iio:deviceX/scan_elements +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Directory containing interfaces for elements that will be + captured for a single triggered sample set in the buffer. + +What: /sys/.../iio:deviceX/scan_elements/in_accel_x_en +What: /sys/.../iio:deviceX/scan_elements/in_accel_y_en +What: /sys/.../iio:deviceX/scan_elements/in_accel_z_en +What: /sys/.../iio:deviceX/scan_elements/in_anglvel_x_en +What: /sys/.../iio:deviceX/scan_elements/in_anglvel_y_en +What: /sys/.../iio:deviceX/scan_elements/in_anglvel_z_en +What: /sys/.../iio:deviceX/scan_elements/in_magn_x_en +What: /sys/.../iio:deviceX/scan_elements/in_magn_y_en +What: /sys/.../iio:deviceX/scan_elements/in_magn_z_en +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_en +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_en +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_en +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_en +What: /sys/.../iio:deviceX/scan_elements/in_timestamp_en +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_en +What: /sys/.../iio:deviceX/scan_elements/in_voltageY-voltageZ_en +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_i_en +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_q_en +What: /sys/.../iio:deviceX/scan_elements/in_voltage_i_en +What: /sys/.../iio:deviceX/scan_elements/in_voltage_q_en +What: /sys/.../iio:deviceX/scan_elements/in_incli_x_en +What: /sys/.../iio:deviceX/scan_elements/in_incli_y_en +What: /sys/.../iio:deviceX/scan_elements/in_pressureY_en +What: /sys/.../iio:deviceX/scan_elements/in_pressure_en +What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_en +What: /sys/.../iio:deviceX/scan_elements/in_proximity_en +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Scan element control for triggered data capture. + +What: /sys/.../iio:deviceX/scan_elements/in_accel_type +What: /sys/.../iio:deviceX/scan_elements/in_anglvel_type +What: /sys/.../iio:deviceX/scan_elements/in_magn_type +What: /sys/.../iio:deviceX/scan_elements/in_incli_type +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_type +What: /sys/.../iio:deviceX/scan_elements/in_voltage_type +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_type +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_i_type +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_q_type +What: /sys/.../iio:deviceX/scan_elements/in_voltage_i_type +What: /sys/.../iio:deviceX/scan_elements/in_voltage_q_type +What: /sys/.../iio:deviceX/scan_elements/in_timestamp_type +What: /sys/.../iio:deviceX/scan_elements/in_pressureY_type +What: /sys/.../iio:deviceX/scan_elements/in_pressure_type +What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_type +What: /sys/.../iio:deviceX/scan_elements/in_proximity_type +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + Description of the scan element data storage within the buffer + and hence the form in which it is read from user-space. + Form is [be|le]:[s|u]bits/storagebits[>>shift]. + be or le specifies big or little endian. s or u specifies if + signed (2's complement) or unsigned. bits is the number of bits + of data and storagebits is the space (after padding) that it + occupies in the buffer. shift if specified, is the shift that + needs to be applied prior to masking out unused bits. Some + devices put their data in the middle of the transferred elements + with additional information on both sides. Note that some + devices will have additional information in the unused bits + so to get a clean value, the bits value must be used to mask + the buffer output value appropriately. The storagebits value + also specifies the data alignment. So s48/64>>2 will be a + signed 48 bit integer stored in a 64 bit location aligned to + a 64 bit boundary. To obtain the clean value, shift right 2 + and apply a mask to zero the top 16 bits of the result. + For other storage combinations this attribute will be extended + appropriately. + +What: /sys/.../iio:deviceX/scan_elements/in_accel_type_available +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + If the type parameter can take one of a small set of values, + this attribute lists them. + +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_index +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_index +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_i_index +What: /sys/.../iio:deviceX/scan_elements/in_voltageY_q_index +What: /sys/.../iio:deviceX/scan_elements/in_voltage_i_index +What: /sys/.../iio:deviceX/scan_elements/in_voltage_q_index +What: /sys/.../iio:deviceX/scan_elements/in_accel_x_index +What: /sys/.../iio:deviceX/scan_elements/in_accel_y_index +What: /sys/.../iio:deviceX/scan_elements/in_accel_z_index +What: /sys/.../iio:deviceX/scan_elements/in_anglvel_x_index +What: /sys/.../iio:deviceX/scan_elements/in_anglvel_y_index +What: /sys/.../iio:deviceX/scan_elements/in_anglvel_z_index +What: /sys/.../iio:deviceX/scan_elements/in_magn_x_index +What: /sys/.../iio:deviceX/scan_elements/in_magn_y_index +What: /sys/.../iio:deviceX/scan_elements/in_magn_z_index +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_index +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_index +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_index +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_index +What: /sys/.../iio:deviceX/scan_elements/in_incli_x_index +What: /sys/.../iio:deviceX/scan_elements/in_incli_y_index +What: /sys/.../iio:deviceX/scan_elements/in_timestamp_index +What: /sys/.../iio:deviceX/scan_elements/in_pressureY_index +What: /sys/.../iio:deviceX/scan_elements/in_pressure_index +What: /sys/.../iio:deviceX/scan_elements/in_rot_quaternion_index +What: /sys/.../iio:deviceX/scan_elements/in_proximity_index +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + A single positive integer specifying the position of this + scan element in the buffer. Note these are not dependent on + what is enabled and may not be contiguous. Thus for user-space + to establish the full layout these must be used in conjunction + with all _en attributes to establish which channels are present, + and the relevant _type attributes to establish the data storage + format. + +What: /sys/.../iio:deviceX/in_activity_still_input +What: /sys/.../iio:deviceX/in_activity_walking_input +What: /sys/.../iio:deviceX/in_activity_jogging_input +What: /sys/.../iio:deviceX/in_activity_running_input +KernelVersion: 3.19 +Contact: linux-iio@vger.kernel.org +Description: + This attribute is used to read the confidence for an activity + expressed in units as percentage. + +What: /sys/.../iio:deviceX/in_anglvel_z_quadrature_correction_raw +KernelVersion: 2.6.38 +Contact: linux-iio@vger.kernel.org +Description: + This attribute is used to read the amount of quadrature error + present in the device at a given time. + +What: /sys/.../iio:deviceX/in_accelX_power_mode +KernelVersion: 3.11 +Contact: linux-iio@vger.kernel.org +Description: + Specifies the chip power mode. + low_noise: reduce noise level from ADC, + low_power: enable low current consumption. + For a list of available output power modes read + in_accel_power_mode_available. + +What: /sys/.../iio:deviceX/in_energy_input +What: /sys/.../iio:deviceX/in_energy_raw +KernelVersion: 4.0 +Contact: linux-iio@vger.kernel.org +Description: + This attribute is used to read the energy value reported by the + device (e.g.: human activity sensors report energy burnt by the + user). Units after application of scale are Joules. + +What: /sys/.../iio:deviceX/in_distance_input +What: /sys/.../iio:deviceX/in_distance_raw +KernelVersion: 4.0 +Contact: linux-iio@vger.kernel.org +Description: + This attribute is used to read the measured distance to an object + or the distance covered by the user since the last reboot while + activated. Units after application of scale are meters. + +What: /sys/bus/iio/devices/iio:deviceX/store_eeprom +KernelVersion: 3.4.0 +Contact: linux-iio@vger.kernel.org +Description: + Writing '1' stores the current device configuration into + on-chip EEPROM. After power-up or chip reset the device will + automatically load the saved configuration. + +What: /sys/.../iio:deviceX/in_proximity_raw +What: /sys/.../iio:deviceX/in_proximity_input +What: /sys/.../iio:deviceX/in_proximityY_raw +KernelVersion: 3.4 +Contact: linux-iio@vger.kernel.org +Description: + Proximity measurement indicating that some + object is near the sensor, usually by observing + reflectivity of infrared or ultrasound emitted. + + Often these sensors are unit less and as such conversion + to SI units is not possible. Higher proximity measurements + indicate closer objects, and vice versa. Units after + application of scale and offset are meters. + +What: /sys/.../iio:deviceX/in_illuminance_input +What: /sys/.../iio:deviceX/in_illuminance_raw +What: /sys/.../iio:deviceX/in_illuminanceY_input +What: /sys/.../iio:deviceX/in_illuminanceY_raw +What: /sys/.../iio:deviceX/in_illuminanceY_mean_raw +What: /sys/.../iio:deviceX/in_illuminance_ir_raw +What: /sys/.../iio:deviceX/in_illuminance_clear_raw +KernelVersion: 3.4 +Contact: linux-iio@vger.kernel.org +Description: + Illuminance measurement, units after application of scale + and offset are lux. + +What: /sys/.../iio:deviceX/in_intensityY_raw +What: /sys/.../iio:deviceX/in_intensityY_ir_raw +What: /sys/.../iio:deviceX/in_intensityY_both_raw +What: /sys/.../iio:deviceX/in_intensityY_uv_raw +What: /sys/.../iio:deviceX/in_intensityY_duv_raw +KernelVersion: 3.4 +Contact: linux-iio@vger.kernel.org +Description: + Unit-less light intensity. Modifiers both and ir indicate + that measurements contain visible and infrared light + components or just infrared light, respectively. Modifier + uv indicates that measurements contain ultraviolet light + components. Modifier duv indicates that measurements + contain deep ultraviolet light components. + +What: /sys/.../iio:deviceX/in_uvindex_input +KernelVersion: 4.6 +Contact: linux-iio@vger.kernel.org +Description: + UV light intensity index measuring the human skin's response to + different wavelength of sunlight weighted according to the + standardised CIE Erythemal Action Spectrum. UV index values range + from 0 (low) to >=11 (extreme). + +What: /sys/.../iio:deviceX/in_intensity_integration_time +What: /sys/.../iio:deviceX/in_intensity_red_integration_time +What: /sys/.../iio:deviceX/in_intensity_green_integration_time +What: /sys/.../iio:deviceX/in_intensity_blue_integration_time +What: /sys/.../iio:deviceX/in_intensity_clear_integration_time +What: /sys/.../iio:deviceX/in_illuminance_integration_time +KernelVersion: 3.12 +Contact: linux-iio@vger.kernel.org +Description: + This attribute is used to get/set the integration time in + seconds. If shared across all channels of a given type, + <type>_integration_time is used. + +What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_integration_time +KernelVersion: 4.0 +Contact: linux-iio@vger.kernel.org +Description: + Number of seconds in which to compute speed. + +What: /sys/bus/iio/devices/iio:deviceX/in_rot_quaternion_raw +KernelVersion: 3.15 +Contact: linux-iio@vger.kernel.org +Description: + Raw value of quaternion components using a format + x y z w. Here x, y, and z component represents the axis about + which a rotation will occur and w component represents the + amount of rotation. + +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_raw +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_raw +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_raw +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_raw +KernelVersion: 3.15 +Contact: linux-iio@vger.kernel.org +Description: + Raw value of rotation from true/magnetic north measured with + or without compensation from tilt sensors. + +What: /sys/bus/iio/devices/iio:deviceX/in_currentX_raw +What: /sys/bus/iio/devices/iio:deviceX/in_currentX_i_raw +What: /sys/bus/iio/devices/iio:deviceX/in_currentX_q_raw +KernelVersion: 3.18 +Contact: linux-iio@vger.kernel.org +Description: + Raw current measurement from channel X. Units are in milliamps + after application of scale and offset. If no offset or scale is + present, output should be considered as processed with the + unit in milliamps. + + Channels with 'i' and 'q' modifiers always exist in pairs and both + channels refer to the same signal. The 'i' channel contains the in-phase + component of the signal while the 'q' channel contains the quadrature + component. + +What: /sys/.../iio:deviceX/in_energy_en +What: /sys/.../iio:deviceX/in_distance_en +What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_en +What: /sys/.../iio:deviceX/in_steps_en +KernelVersion: 3.19 +Contact: linux-iio@vger.kernel.org +Description: + Activates a device feature that runs in firmware/hardware. + E.g. for steps: the pedometer saves power while not used; + when activated, it will count the steps taken by the user in + firmware and export them through in_steps_input. + +What: /sys/.../iio:deviceX/in_steps_input +KernelVersion: 3.19 +Contact: linux-iio@vger.kernel.org +Description: + This attribute is used to read the number of steps taken by the user + since the last reboot while activated. + +What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_input +What: /sys/.../iio:deviceX/in_velocity_sqrt(x^2+y^2+z^2)_raw +KernelVersion: 3.19 +Contact: linux-iio@vger.kernel.org +Description: + This attribute is used to read the current speed value of the + user (which is the norm or magnitude of the velocity vector). + Units after application of scale are m/s. + +What: /sys/.../iio:deviceX/in_steps_debounce_count +KernelVersion: 4.0 +Contact: linux-iio@vger.kernel.org +Description: + Specifies the number of steps that must occur within + in_steps_filter_debounce_time for the pedometer to decide the + consumer is making steps. + +What: /sys/.../iio:deviceX/in_steps_debounce_time +KernelVersion: 4.0 +Contact: linux-iio@vger.kernel.org +Description: + Specifies number of seconds in which we compute the steps + that occur in order to decide if the consumer is making steps. + +What: /sys/bus/iio/devices/iio:deviceX/buffer/watermark +KernelVersion: 4.2 +Contact: linux-iio@vger.kernel.org +Description: + A single positive integer specifying the maximum number of scan + elements to wait for. + + Poll will block until the watermark is reached. + + Blocking read will wait until the minimum between the requested + read amount or the low water mark is available. + + Non-blocking read will retrieve the available samples from the + buffer even if there are less samples then watermark level. This + allows the application to block on poll with a timeout and read + the available samples after the timeout expires and thus have a + maximum delay guarantee. + +What: /sys/bus/iio/devices/iio:deviceX/buffer/data_available +KernelVersion: 4.16 +Contact: linux-iio@vger.kernel.org +Description: + A read-only value indicating the bytes of data available in the + buffer. In the case of an output buffer, this indicates the + amount of empty space available to write data to. In the case of + an input buffer, this indicates the amount of data available for + reading. + +What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_enabled +KernelVersion: 4.2 +Contact: linux-iio@vger.kernel.org +Description: + A read-only boolean value that indicates if the hardware fifo is + currently enabled or disabled. If the device does not have a + hardware fifo this entry is not present. + The hardware fifo is enabled when the buffer is enabled if the + current hardware fifo watermark level is set and other current + device settings allows it (e.g. if a trigger is set that samples + data differently that the hardware fifo does then hardware fifo + will not enabled). + + If the hardware fifo is enabled and the level of the hardware + fifo reaches the hardware fifo watermark level the device will + flush its hardware fifo to the device buffer. Doing a non + blocking read on the device when no samples are present in the + device buffer will also force a flush. + + When the hardware fifo is enabled there is no need to use a + trigger to use buffer mode since the watermark settings + guarantees that the hardware fifo is flushed to the device + buffer. + +What: /sys/bus/iio/devices/iio:device*/buffer/hwfifo_timeout +KernelVersion: 4.12 +Contact: linux-iio@vger.kernel.org +Description: + A read/write property to provide capability to delay reporting of + samples till a timeout is reached. This allows host processors to + sleep, while the sensor is storing samples in its internal fifo. + The maximum timeout in seconds can be specified by setting + hwfifo_timeout.The current delay can be read by reading + hwfifo_timeout. A value of 0 means that there is no timeout. + +What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark +KernelVersion: 4.2 +Contact: linux-iio@vger.kernel.org +Description: + Read-only entry that contains a single integer specifying the + current watermark level for the hardware fifo. If the device + does not have a hardware fifo this entry is not present. + The watermark level for the hardware fifo is set by the driver + based on the value set by the user in buffer/watermark but + taking into account hardware limitations (e.g. most hardware + buffers are limited to 32-64 samples, some hardware buffers + watermarks are fixed or have minimum levels). A value of 0 + means that the hardware watermark is unset. + +What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark_min +KernelVersion: 4.2 +Contact: linux-iio@vger.kernel.org +Description: + A single positive integer specifying the minimum watermark level + for the hardware fifo of this device. If the device does not + have a hardware fifo this entry is not present. + + If the user sets buffer/watermark to a value less than this one, + then the hardware watermark will remain unset. + +What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark_max +KernelVersion: 4.2 +Contact: linux-iio@vger.kernel.org +Description: + A single positive integer specifying the maximum watermark level + for the hardware fifo of this device. If the device does not + have a hardware fifo this entry is not present. + + If the user sets buffer/watermark to a value greater than this + one, then the hardware watermark will be capped at this value. + +What: /sys/bus/iio/devices/iio:deviceX/buffer/hwfifo_watermark_available +KernelVersion: 4.2 +Contact: linux-iio@vger.kernel.org +Description: + A list of positive integers specifying the available watermark + levels for the hardware fifo. This entry is optional and if it + is not present it means that all the values between + hwfifo_watermark_min and hwfifo_watermark_max are supported. + + If the user sets buffer/watermark to a value greater than + hwfifo_watermak_min but not equal to any of the values in this + list, the driver will chose an appropriate value for the + hardware fifo watermark level. + +What: /sys/bus/iio/devices/iio:deviceX/in_temp_calibemissivity +What: /sys/bus/iio/devices/iio:deviceX/in_tempX_calibemissivity +What: /sys/bus/iio/devices/iio:deviceX/in_temp_object_calibemissivity +What: /sys/bus/iio/devices/iio:deviceX/in_tempX_object_calibemissivity +KernelVersion: 4.1 +Contact: linux-iio@vger.kernel.org +Description: + The emissivity ratio of the surface in the field of view of the + contactless temperature sensor. Emissivity varies from 0 to 1, + with 1 being the emissivity of a black body. + +What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_oversampling_ratio +What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_oversampling_ratio +What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_oversampling_ratio +KernelVersion: 4.2 +Contact: linux-iio@vger.kernel.org +Description: + Hardware applied number of measurements for acquiring one + data point. The HW will do <type>[_name]_oversampling_ratio + measurements and return the average value as output data. Each + value resulted from <type>[_name]_oversampling_ratio measurements + is considered as one sample for <type>[_name]_sampling_frequency. + +What: /sys/bus/iio/devices/iio:deviceX/in_concentration_raw +What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_raw +What: /sys/bus/iio/devices/iio:deviceX/in_concentration_co2_raw +What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_co2_raw +What: /sys/bus/iio/devices/iio:deviceX/in_concentration_ethanol_raw +What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_ethanol_raw +What: /sys/bus/iio/devices/iio:deviceX/in_concentration_h2_raw +What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_h2_raw +What: /sys/bus/iio/devices/iio:deviceX/in_concentration_o2_raw +What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_o2_raw +What: /sys/bus/iio/devices/iio:deviceX/in_concentration_voc_raw +What: /sys/bus/iio/devices/iio:deviceX/in_concentrationX_voc_raw +KernelVersion: 4.3 +Contact: linux-iio@vger.kernel.org +Description: + Raw (unscaled no offset etc.) reading of a substance. Units + after application of scale and offset are percents. + +What: /sys/bus/iio/devices/iio:deviceX/in_resistance_raw +What: /sys/bus/iio/devices/iio:deviceX/in_resistanceX_raw +What: /sys/bus/iio/devices/iio:deviceX/out_resistance_raw +What: /sys/bus/iio/devices/iio:deviceX/out_resistanceX_raw +KernelVersion: 4.3 +Contact: linux-iio@vger.kernel.org +Description: + Raw (unscaled no offset etc.) resistance reading that can be processed + into an ohm value. + +What: /sys/bus/iio/devices/iio:deviceX/heater_enable +KernelVersion: 4.1.0 +Contact: linux-iio@vger.kernel.org +Description: + '1' (enable) or '0' (disable) specifying the enable + of heater function. Same reading values apply. + + This ABI is especially applicable for humidity sensors + to heatup the device and get rid of any condensation + in some humidity environment + +What: /sys/bus/iio/devices/iio:deviceX/in_ph_raw +KernelVersion: 4.5 +Contact: linux-iio@vger.kernel.org +Description: + Raw (unscaled no offset etc.) pH reading of a substance as a negative + base-10 logarithm of hydrodium ions in a litre of water. + +What: /sys/bus/iio/devices/iio:deviceX/mount_matrix +What: /sys/bus/iio/devices/iio:deviceX/in_mount_matrix +What: /sys/bus/iio/devices/iio:deviceX/out_mount_matrix +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_mount_matrix +What: /sys/bus/iio/devices/iio:deviceX/in_accel_mount_matrix +KernelVersion: 4.6 +Contact: linux-iio@vger.kernel.org +Description: + Mounting matrix for IIO sensors. This is a rotation matrix which + informs userspace about sensor chip's placement relative to the + main hardware it is mounted on. + + Main hardware placement is defined according to the local + reference frame related to the physical quantity the sensor + measures. + + Given that the rotation matrix is defined in a board specific + way (platform data and / or device-tree), the main hardware + reference frame definition is left to the implementor's choice + (see below for a magnetometer example). + + Applications should apply this rotation matrix to samples so + that when main hardware reference frame is aligned onto local + reference frame, then sensor chip reference frame is also + perfectly aligned with it. + + Matrix is a 3x3 unitary matrix and typically looks like + [0, 1, 0; 1, 0, 0; 0, 0, -1]. Identity matrix + [1, 0, 0; 0, 1, 0; 0, 0, 1] means sensor chip and main hardware + are perfectly aligned with each other. + + For example, a mounting matrix for a magnetometer sensor informs + userspace about sensor chip's ORIENTATION relative to the main + hardware. + + More specifically, main hardware orientation is defined with + respect to the LOCAL EARTH GEOMAGNETIC REFERENCE FRAME where : + + * Y is in the ground plane and positive towards magnetic North ; + * X is in the ground plane, perpendicular to the North axis and + positive towards the East ; + * Z is perpendicular to the ground plane and positive upwards. + + An implementor might consider that for a hand-held device, a + 'natural' orientation would be 'front facing camera at the top'. + The main hardware reference frame could then be described as : + + * Y is in the plane of the screen and is positive towards the + top of the screen ; + * X is in the plane of the screen, perpendicular to Y axis, and + positive towards the right hand side of the screen ; + * Z is perpendicular to the screen plane and positive out of the + screen. + + Another example for a quadrotor UAV might be : + + * Y is in the plane of the propellers and positive towards the + front-view camera; + * X is in the plane of the propellers, perpendicular to Y axis, + and positive towards the starboard side of the UAV ; + * Z is perpendicular to propellers plane and positive upwards. + +What: /sys/bus/iio/devices/iio:deviceX/in_electricalconductivity_raw +KernelVersion: 4.8 +Contact: linux-iio@vger.kernel.org +Description: + Raw (unscaled no offset etc.) electric conductivity reading that + can be processed to siemens per meter. + +What: /sys/bus/iio/devices/iio:deviceX/in_countY_raw +KernelVersion: 4.10 +Contact: linux-iio@vger.kernel.org +Description: + This interface is deprecated; please use the Counter subsystem. + + Raw counter device counts from channel Y. For quadrature + counters, multiplication by an available [Y]_scale results in + the counts of a single quadrature signal phase from channel Y. + +What: /sys/bus/iio/devices/iio:deviceX/in_indexY_raw +KernelVersion: 4.10 +Contact: linux-iio@vger.kernel.org +Description: + This interface is deprecated; please use the Counter subsystem. + + Raw counter device index value from channel Y. This attribute + provides an absolute positional reference (e.g. a pulse once per + revolution) which may be used to home positional systems as + required. + +What: /sys/bus/iio/devices/iio:deviceX/in_count_count_direction_available +KernelVersion: 4.12 +Contact: linux-iio@vger.kernel.org +Description: + This interface is deprecated; please use the Counter subsystem. + + A list of possible counting directions which are: + + - "up" : counter device is increasing. + - "down": counter device is decreasing. + +What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_direction +KernelVersion: 4.12 +Contact: linux-iio@vger.kernel.org +Description: + This interface is deprecated; please use the Counter subsystem. + + Raw counter device counters direction for channel Y. + +What: /sys/bus/iio/devices/iio:deviceX/in_phaseY_raw +KernelVersion: 4.18 +Contact: linux-iio@vger.kernel.org +Description: + Raw (unscaled) phase difference reading from channel Y + that can be processed to radians. + +What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm1_input +What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm1_input +What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm2p5_input +What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm2p5_input +What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm4_input +What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm4_input +What: /sys/bus/iio/devices/iio:deviceX/in_massconcentration_pm10_input +What: /sys/bus/iio/devices/iio:deviceX/in_massconcentrationY_pm10_input +KernelVersion: 4.22 +Contact: linux-iio@vger.kernel.org +Description: + Mass concentration reading of particulate matter in ug / m3. + pmX consists of particles with aerodynamic diameter less or + equal to X micrometers. + +What: /sys/bus/iio/devices/iio:deviceX/events/in_illuminance_period_available +Date: November 2019 +KernelVersion: 5.4 +Contact: linux-iio@vger.kernel.org +Description: + List of valid periods (in seconds) for which the light intensity + must be above the threshold level before interrupt is asserted. + +What: /sys/bus/iio/devices/iio:deviceX/in_filter_notch_center_frequency +KernelVersion: 5.5 +Contact: linux-iio@vger.kernel.org +Description: + Center frequency in Hz for a notch filter. Used i.e. for line + noise suppression. + +What: /sys/bus/iio/devices/iio:deviceX/in_temp_thermocouple_type +KernelVersion: 5.5 +Contact: linux-iio@vger.kernel.org +Description: + One of the following thermocouple types: B, E, J, K, N, R, S, T. + +What: /sys/bus/iio/devices/iio:deviceX/in_temp_object_calibambient +What: /sys/bus/iio/devices/iio:deviceX/in_tempX_object_calibambient +KernelVersion: 5.10 +Contact: linux-iio@vger.kernel.org +Description: + Calibrated ambient temperature for object temperature + calculation in milli degrees Celsius. + +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_x_raw +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_y_raw +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_z_raw +KernelVersion: 5.10 +Contact: linux-iio@vger.kernel.org +Description: + Unscaled light intensity according to CIE 1931/DIN 5033 color space. + Units after application of scale are nano nanowatts per square meter. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-accel-adxl372 b/Documentation/ABI/testing/sysfs-bus-iio-accel-adxl372 new file mode 100644 index 000000000..47e34f865 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-accel-adxl372 @@ -0,0 +1,7 @@ +What: /sys/bus/iio/devices/triggerX/name = "adxl372-devX-peak" +KernelVersion: +Contact: linux-iio@vger.kernel.org +Description: + The adxl372 accelerometer kernel module provides an additional trigger, + which sets the device in a mode in which it will record only the peak acceleration + sensed over the set period of time in the events sysfs. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-accel-bmc150 b/Documentation/ABI/testing/sysfs-bus-iio-accel-bmc150 new file mode 100644 index 000000000..99847a913 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-accel-bmc150 @@ -0,0 +1,7 @@ +What: /sys/bus/iio/devices/triggerX/name = "bmc150_accel-any-motion-devX" +KernelVersion: 3.17 +Contact: linux-iio@vger.kernel.org +Description: + The BMC150 accelerometer kernel module provides an additional trigger, + which sets driver in a mode, where data is pushed to the buffer + only when there is any motion. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192 b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192 new file mode 100644 index 000000000..f8315202c --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192 @@ -0,0 +1,51 @@ +What: /sys/bus/iio/devices/iio:deviceX/ac_excitation_en +KernelVersion: +Contact: linux-iio@vger.kernel.org +Description: + This attribute, if available, is used to enable the AC + excitation mode found on some converters. In ac excitation mode, + the polarity of the excitation voltage is reversed on + alternate cycles, to eliminate DC errors. + +What: /sys/bus/iio/devices/iio:deviceX/bridge_switch_en +KernelVersion: +Contact: linux-iio@vger.kernel.org +Description: + This attribute, if available, is used to close or open the + bridge power down switch found on some converters. + In bridge applications, such as strain gauges and load cells, + the bridge itself consumes the majority of the current in the + system. To minimize the current consumption of the system, + the bridge can be disconnected (when it is not being used + using the bridge_switch_en attribute. + +What: /sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration +KernelVersion: +Contact: linux-iio@vger.kernel.org +Description: + Initiates the system calibration procedure. This is done on a + single channel at a time. Write '1' to start the calibration. + +What: /sys/bus/iio/devices/iio:deviceX/in_voltage2-voltage2_shorted_raw +KernelVersion: +Contact: linux-iio@vger.kernel.org +Description: + Measure voltage from AIN2 pin connected to AIN(+) + and AIN(-) shorted. + +What: /sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration_mode_available +KernelVersion: +Contact: linux-iio@vger.kernel.org +Description: + Reading returns a list with the possible calibration modes. + There are two available options: + "zero_scale" - calibrate to zero scale + "full_scale" - calibrate to full scale + +What: /sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration_mode +KernelVersion: +Contact: linux-iio@vger.kernel.org +Description: + Sets up the calibration mode used in the system calibration + procedure. Reading returns the current calibration mode. + Writing sets the system calibration mode. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-envelope-detector b/Documentation/ABI/testing/sysfs-bus-iio-adc-envelope-detector new file mode 100644 index 000000000..1c2a07f7a --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-envelope-detector @@ -0,0 +1,39 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_altvoltageY_invert +Date: October 2016 +KernelVersion: 4.9 +Contact: Peter Rosin <peda@axentia.se> +Description: + The DAC is used to find the peak level of an alternating + voltage input signal by a binary search using the output + of a comparator wired to an interrupt pin. Like so:: + + _ + | \ + input +------>-------|+ \ + | \ + .-------. | }---. + | | | / | + | dac|-->--|- / | + | | |_/ | + | | | + | | | + | irq|------<-------' + | | + '-------' + + The boolean invert attribute (0/1) should be set when the + input signal is centered around the maximum value of the + dac instead of zero. The envelope detector will search + from below in this case and will also invert the result. + + The edge/level of the interrupt is also switched to its + opposite value. + +What: /sys/bus/iio/devices/iio:deviceX/in_altvoltageY_compare_interval +Date: October 2016 +KernelVersion: 4.9 +Contact: Peter Rosin <peda@axentia.se> +Description: + Number of milliseconds to wait for the comparator in each + step of the binary search for the input peak level. Needs + to relate to the frequency of the input signal. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-hi8435 b/Documentation/ABI/testing/sysfs-bus-iio-adc-hi8435 new file mode 100644 index 000000000..4b01150af --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-hi8435 @@ -0,0 +1,48 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_sensing_mode +Date: August 2015 +KernelVersion: 4.2.0 +Contact: source@cogentembedded.com +Description: + Program sensor type for threshold detector inputs. + Could be either "GND-Open" or "Supply-Open" mode. Y is a + threshold detector input channel. Channels 0..7, 8..15, 16..23 + and 24..31 has common sensor types. + +What: /sys/bus/iio/devices/iio:deviceX/events/in_voltageY_thresh_falling_value +Date: August 2015 +KernelVersion: 4.2.0 +Contact: source@cogentembedded.com +Description: + Channel Y low voltage threshold. If sensor input voltage goes lower then + this value then the threshold falling event is pushed. + Depending on in_voltageY_sensing_mode the low voltage threshold + is separately set for "GND-Open" and "Supply-Open" modes. + Channels 0..31 have common low threshold values, but could have different + sensing_modes. + + The low voltage threshold range is between 2..21V. + Hysteresis between low and high thresholds can not be lower then 2 and + can not be odd. + + If falling threshold results hysteresis to odd value then rising + threshold is automatically subtracted by one. + +What: /sys/bus/iio/devices/iio:deviceX/events/in_voltageY_thresh_rising_value +Date: August 2015 +KernelVersion: 4.2.0 +Contact: source@cogentembedded.com +Description: + Channel Y high voltage threshold. If sensor input voltage goes higher then + this value then the threshold rising event is pushed. + Depending on in_voltageY_sensing_mode the high voltage threshold + is separately set for "GND-Open" and "Supply-Open" modes. + + Channels 0..31 have common high threshold values, but could have different + sensing_modes. + + The high voltage threshold range is between 3..22V. + Hysteresis between low and high thresholds can not be lower then 2 and + can not be odd. + + If rising threshold results hysteresis to odd value then falling + threshold is automatically appended by one. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-max9611 b/Documentation/ABI/testing/sysfs-bus-iio-adc-max9611 new file mode 100644 index 000000000..6d2d2b094 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-max9611 @@ -0,0 +1,17 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_power_shunt_resistor +Date: March 2017 +KernelVersion: 4.12 +Contact: linux-iio@vger.kernel.org +Description: The value of the shunt resistor used to compute power drain on + common input voltage pin (RS+). In Ohms. + +What: /sys/bus/iio/devices/iio:deviceX/in_current_shunt_resistor +Date: March 2017 +KernelVersion: 4.12 +Contact: linux-iio@vger.kernel.org +Description: The value of the shunt resistor used to compute current flowing + between RS+ and RS- voltage sense inputs. In Ohms. + +These attributes describe a single physical component, exposed as two distinct +attributes as it is used to calculate two different values: power load and +current flowing between RS+ and RS- inputs. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32 new file mode 100644 index 000000000..1975c7a1a --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32 @@ -0,0 +1,21 @@ +What: /sys/bus/iio/devices/triggerX/trigger_polarity +KernelVersion: 4.11 +Contact: fabrice.gasnier@st.com +Description: + The STM32 ADC can be configured to use external trigger sources + (e.g. timers, pwm or exti gpio). Then, it can be tuned to start + conversions on external trigger by either: + + - "rising-edge" + - "falling-edge" + - "both-edges". + + Reading returns current trigger polarity. + + Writing value before enabling conversions sets trigger polarity. + +What: /sys/bus/iio/devices/triggerX/trigger_polarity_available +KernelVersion: 4.11 +Contact: fabrice.gasnier@st.com +Description: + List all available trigger_polarity settings. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-chemical-vz89x b/Documentation/ABI/testing/sysfs-bus-iio-chemical-vz89x new file mode 100644 index 000000000..d512f8656 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-chemical-vz89x @@ -0,0 +1,7 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_concentration_VOC_short_raw +Date: September 2015 +KernelVersion: 4.3 +Contact: Matt Ranostay <matt.ranostay@konsulko.com> +Description: + Get the raw calibration VOC value from the sensor. + This value has little application outside of calibration. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8 b/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8 new file mode 100644 index 000000000..bac3d0d48 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-counter-104-quad-8 @@ -0,0 +1,133 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_count_count_mode_available +What: /sys/bus/iio/devices/iio:deviceX/in_count_noise_error_available +What: /sys/bus/iio/devices/iio:deviceX/in_count_quadrature_mode_available +What: /sys/bus/iio/devices/iio:deviceX/in_index_index_polarity_available +What: /sys/bus/iio/devices/iio:deviceX/in_index_synchronous_mode_available +KernelVersion: 4.10 +Contact: linux-iio@vger.kernel.org +Description: + This interface is deprecated; please use the Counter subsystem. + + Discrete set of available values for the respective counter + configuration are listed in this file. + +What: /sys/bus/iio/devices/iio:deviceX/in_countY_count_mode +KernelVersion: 4.10 +Contact: linux-iio@vger.kernel.org +Description: + This interface is deprecated; please use the Counter subsystem. + + Count mode for channel Y. Four count modes are available: + normal, range limit, non-recycle, and modulo-n. The preset value + for channel Y is used by the count mode where required. + + Normal: + Counting is continuous in either direction. + + Range Limit: + An upper or lower limit is set, mimicking limit switches + in the mechanical counterpart. The upper limit is set to + the preset value, while the lower limit is set to 0. The + counter freezes at count = preset when counting up, and + at count = 0 when counting down. At either of these + limits, the counting is resumed only when the count + direction is reversed. + + Non-recycle: + Counter is disabled whenever a 24-bit count overflow or + underflow takes place. The counter is re-enabled when a + new count value is loaded to the counter via a preset + operation or write to raw. + + Modulo-N: + A count boundary is set between 0 and the preset value. + The counter is reset to 0 at count = preset when + counting up, while the counter is set to the preset + value at count = 0 when counting down; the counter does + not freeze at the bundary points, but counts + continuously throughout. + +What: /sys/bus/iio/devices/iio:deviceX/in_countY_noise_error +KernelVersion: 4.10 +Contact: linux-iio@vger.kernel.org +Description: + This interface is deprecated; please use the Counter subsystem. + + Read-only attribute that indicates whether excessive noise is + present at the channel Y count inputs in quadrature clock mode; + irrelevant in non-quadrature clock mode. + +What: /sys/bus/iio/devices/iio:deviceX/in_countY_preset +KernelVersion: 4.10 +Contact: linux-iio@vger.kernel.org +Description: + This interface is deprecated; please use the Counter subsystem. + + If the counter device supports preset registers, the preset + count for channel Y is provided by this attribute. + +What: /sys/bus/iio/devices/iio:deviceX/in_countY_quadrature_mode +KernelVersion: 4.10 +Contact: linux-iio@vger.kernel.org +Description: + This interface is deprecated; please use the Counter subsystem. + + Configure channel Y counter for non-quadrature or quadrature + clock mode. Selecting non-quadrature clock mode will disable + synchronous load mode. In quadrature clock mode, the channel Y + scale attribute selects the encoder phase division (scale of 1 + selects full-cycle, scale of 0.5 selects half-cycle, scale of + 0.25 selects quarter-cycle) processed by the channel Y counter. + + Non-quadrature: + The filter and decoder circuit are bypassed. Encoder A + input serves as the count input and B as the UP/DOWN + direction control input, with B = 1 selecting UP Count + mode and B = 0 selecting Down Count mode. + + Quadrature: + Encoder A and B inputs are digitally filtered and + decoded for UP/DN clock. + +What: /sys/bus/iio/devices/iio:deviceX/in_countY_set_to_preset_on_index +KernelVersion: 4.10 +Contact: linux-iio@vger.kernel.org +Description: + This interface is deprecated; please use the Counter subsystem. + + Whether to set channel Y counter with channel Y preset value + when channel Y index input is active, or continuously count. + Valid attribute values are boolean. + +What: /sys/bus/iio/devices/iio:deviceX/in_indexY_index_polarity +KernelVersion: 4.10 +Contact: linux-iio@vger.kernel.org +Description: + This interface is deprecated; please use the Counter subsystem. + + Active level of channel Y index input; irrelevant in + non-synchronous load mode. + +What: /sys/bus/iio/devices/iio:deviceX/in_indexY_synchronous_mode +KernelVersion: 4.10 +Contact: linux-iio@vger.kernel.org +Description: + This interface is deprecated; please use the Counter subsystem. + + Configure channel Y counter for non-synchronous or synchronous + load mode. Synchronous load mode cannot be selected in + non-quadrature clock mode. + + Non-synchronous: + A logic low level is the active level at this index + input. The index function (as enabled via + set_to_preset_on_index) is performed directly on the + active level of the index input. + + Synchronous: + Intended for interfacing with encoder Index output in + quadrature clock mode. The active level is configured + via index_polarity. The index function (as enabled via + set_to_preset_on_index) is performed synchronously with + the quadrature clock on the active level of the index + input. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-cros-ec b/Documentation/ABI/testing/sysfs-bus-iio-cros-ec new file mode 100644 index 000000000..adf24c401 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-cros-ec @@ -0,0 +1,28 @@ +What: /sys/bus/iio/devices/iio:deviceX/calibrate +Date: July 2015 +KernelVersion: 4.7 +Contact: linux-iio@vger.kernel.org +Description: + Writing '1' will perform a FOC (Fast Online Calibration). The + corresponding calibration offsets can be read from `*_calibbias` + entries. + +What: /sys/bus/iio/devices/iio:deviceX/location +Date: July 2015 +KernelVersion: 4.7 +Contact: linux-iio@vger.kernel.org +Description: + This attribute returns a string with the physical location where + the motion sensor is placed. For example, in a laptop a motion + sensor can be located on the base or on the lid. Current valid + values are 'base' and 'lid'. + +What: /sys/bus/iio/devices/iio:deviceX/id +Date: September 2017 +KernelVersion: 4.14 +Contact: linux-iio@vger.kernel.org +Description: + This attribute is exposed by the CrOS EC sensors driver and + represents the sensor ID as exposed by the EC. This ID is used + by the Android sensor service hardware abstraction layer (sensor + HAL) through the Android container on ChromeOS. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-dac-dpot-dac b/Documentation/ABI/testing/sysfs-bus-iio-dac-dpot-dac new file mode 100644 index 000000000..580e93f37 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-dac-dpot-dac @@ -0,0 +1,8 @@ +What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw_available +Date: October 2016 +KernelVersion: 4.9 +Contact: Peter Rosin <peda@axentia.se> +Description: + The range of available values represented as the minimum value, + the step and the maximum value, all enclosed in square brackets. + Example: [0 1 256] diff --git a/Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32 new file mode 100644 index 000000000..91439d6d6 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32 @@ -0,0 +1,22 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_voltage_spi_clk_freq +KernelVersion: 4.14 +Contact: arnaud.pouliquen@st.com +Description: + For audio purpose only. + + Used by audio driver to set/get the spi input frequency. + + This is mandatory if DFSDM is slave on SPI bus, to + provide information on the SPI clock frequency during runtime + Notice that the SPI frequency should be a multiple of sample + frequency to ensure the precision. + + if DFSDM input is SPI master: + + Reading SPI clkout frequency, + error on writing + + If DFSDM input is SPI Slave: + + Reading returns value previously set. + Writing value before starting conversions. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 b/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 new file mode 100644 index 000000000..40df5c9fe --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 @@ -0,0 +1,25 @@ +What: /sys/bus/iio/devices/iio:deviceX/sensor_sensitivity +Date: January 2017 +KernelVersion: 4.11 +Contact: linux-iio@vger.kernel.org +Description: + Show or set the gain boost of the amp, from 0-31 range. + default 31 + +What: /sys/bus/iio/devices/iio:deviceX/sensor_max_range +Date: January 2017 +KernelVersion: 4.11 +Contact: linux-iio@vger.kernel.org +Description: + Show or set the maximum range between the sensor and the + first object echoed in meters. Default value is 6.020. + This setting limits the time the driver is waiting for a + echo. + + Showing the range of available values is represented as the + minimum value, the step and the maximum value, all enclosed + in square brackets. + + Example:: + + [0.043 0.043 11.008] diff --git a/Documentation/ABI/testing/sysfs-bus-iio-dma-buffer b/Documentation/ABI/testing/sysfs-bus-iio-dma-buffer new file mode 100644 index 000000000..d526e6571 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-dma-buffer @@ -0,0 +1,19 @@ +What: /sys/bus/iio/devices/iio:deviceX/buffer/length_align_bytes +KernelVersion: 5.4 +Contact: linux-iio@vger.kernel.org +Description: + DMA buffers tend to have a alignment requirement for the + buffers. If this alignment requirement is not met samples might + be dropped from the buffer. + + This property reports the alignment requirements in bytes. + This means that the buffer size in bytes needs to be a integer + multiple of the number reported by this file. + + The alignment requirements in number of sample sets will depend + on the enabled channels and the bytes per channel. This means + that the alignment requirement in samples sets might change + depending on which and how many channels are enabled. Whereas + the alignment requirement reported in bytes by this property + will remain static and does not depend on which channels are + enabled. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 new file mode 100644 index 000000000..d065cda7d --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 @@ -0,0 +1,31 @@ +What: /sys/bus/iio/devices/iio:deviceX/pll2_feedback_clk_present +What: /sys/bus/iio/devices/iio:deviceX/pll2_reference_clk_present +What: /sys/bus/iio/devices/iio:deviceX/pll1_reference_clk_a_present +What: /sys/bus/iio/devices/iio:deviceX/pll1_reference_clk_b_present +What: /sys/bus/iio/devices/iio:deviceX/pll1_reference_clk_test_present +What: /sys/bus/iio/devices/iio:deviceX/vcxo_clk_present +KernelVersion: 3.4.0 +Contact: linux-iio@vger.kernel.org +Description: + Reading returns either '1' or '0'. + + '1' means that the clock in question is present. + + '0' means that the clock is missing. + +What: /sys/bus/iio/devices/iio:deviceX/pllY_locked +KernelVersion: 3.4.0 +Contact: linux-iio@vger.kernel.org +Description: + Reading returns either '1' or '0'. '1' means that the + pllY is locked. + +What: /sys/bus/iio/devices/iio:deviceX/sync_dividers +KernelVersion: 3.4.0 +Contact: linux-iio@vger.kernel.org +Description: + Writing '1' triggers the clock distribution synchronization + functionality. All dividers are reset and the channels start + with their predefined phase offsets (out_altvoltageY_phase). + Writing this file has the effect as driving the external + /SYNC pin low. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350 new file mode 100644 index 000000000..1254457a7 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4350 @@ -0,0 +1,21 @@ +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency_resolution +KernelVersion: 3.4.0 +Contact: linux-iio@vger.kernel.org +Description: + Stores channel Y frequency resolution/channel spacing in Hz. + The value given directly influences the MODULUS used by + the fractional-N PLL. It is assumed that the algorithm + that is used to compute the various dividers, is able to + generate proper values for multiples of channel spacing. + +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_refin_frequency +KernelVersion: 3.4.0 +Contact: linux-iio@vger.kernel.org +Description: + Sets channel Y REFin frequency in Hz. In some clock chained + applications, the reference frequency used by the PLL may + change during runtime. This attribute allows the user to + adjust the reference frequency accordingly. + The value written has no effect until out_altvoltageY_frequency + is updated. Consider to use out_altvoltageY_powerdown to power + down the PLL and its RFOut buffers during REFin changes. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371 new file mode 100644 index 000000000..544548ee7 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-adf4371 @@ -0,0 +1,44 @@ +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency +KernelVersion: +Contact: linux-iio@vger.kernel.org +Description: + Stores the PLL frequency in Hz for channel Y. + Reading returns the actual frequency in Hz. + The ADF4371 has an integrated VCO with fundamendal output + frequency ranging from 4000000000 Hz 8000000000 Hz. + + out_altvoltage0_frequency: + A divide by 1, 2, 4, 8, 16, 32 or circuit generates + frequencies from 62500000 Hz to 8000000000 Hz. + out_altvoltage1_frequency: + This channel duplicates the channel 0 frequency + out_altvoltage2_frequency: + A frequency doubler generates frequencies from + 8000000000 Hz to 16000000000 Hz. + out_altvoltage3_frequency: + A frequency quadrupler generates frequencies from + 16000000000 Hz to 32000000000 Hz. + + Note: writes to one of the channels will affect the frequency of + all the other channels, since it involves changing the VCO + fundamental output frequency. + +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_name +KernelVersion: +Contact: linux-iio@vger.kernel.org +Description: + Reading returns the datasheet name for channel Y:: + + out_altvoltage0_name: RF8x + out_altvoltage1_name: RFAUX8x + out_altvoltage2_name: RF16x + out_altvoltage3_name: RF32x + +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown +KernelVersion: +Contact: linux-iio@vger.kernel.org +Description: + This attribute allows the user to power down the PLL and it's + RFOut buffers. + Writing 1 causes the specified channel to power down. + Clearing returns to normal operation. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-gyro-bmg160 b/Documentation/ABI/testing/sysfs-bus-iio-gyro-bmg160 new file mode 100644 index 000000000..e98209c91 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-gyro-bmg160 @@ -0,0 +1,7 @@ +What: /sys/bus/iio/devices/triggerX/name = "bmg160-any-motion-devX" +KernelVersion: 3.17 +Contact: linux-iio@vger.kernel.org +Description: + The BMG160 gyro kernel module provides an additional trigger, + which sets driver in a mode, where data is pushed to the buffer + only when there is any motion. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x b/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x new file mode 100644 index 000000000..66b621f10 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-health-afe440x @@ -0,0 +1,45 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_raw +Date: May 2016 +KernelVersion: +Contact: Andrew F. Davis <afd@ti.com> +Description: + Get measured values from the ADC for these stages. Y is the + specific stage number corresponding to datasheet stage names + as follows: + + == ========== + 1 LED2 + 2 ALED2/LED3 + 3 LED1 + 4 ALED1/LED4 + == ========== + + Note that channels 5 and 6 represent LED2-ALED2 and LED1-ALED1 + respectively which simply helper channels containing the + calculated difference in the value of stage 1 - 2 and 3 - 4. + The values are expressed in 24-bit twos complement. + +What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_offset +Date: May 2016 +KernelVersion: +Contact: Andrew F. Davis <afd@ti.com> +Description: + Get and set the offset cancellation DAC setting for these + stages. The values are expressed in 5-bit sign-magnitude. + +What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_resistance +What: /sys/bus/iio/devices/iio:deviceX/in_intensityY_capacitance +Date: May 2016 +KernelVersion: +Contact: Andrew F. Davis <afd@ti.com> +Description: + Get and set the resistance and the capacitance settings for the + Transimpedance Amplifier during the associated stage. + +What: /sys/bus/iio/devices/iio:deviceX/out_currentY_raw +Date: May 2016 +KernelVersion: +Contact: Andrew F. Davis <afd@ti.com> +Description: + Get and set the LED current for the specified LED active during + this stage. Y is the specific stage number. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc100x b/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc100x new file mode 100644 index 000000000..b72bb6255 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc100x @@ -0,0 +1,9 @@ +What: /sys/bus/iio/devices/iio:deviceX/out_current_heater_raw +What: /sys/bus/iio/devices/iio:deviceX/out_current_heater_raw_available +KernelVersion: 4.3 +Contact: linux-iio@vger.kernel.org +Description: + Controls the heater device within the humidity sensor to get + rid of excess condensation. + + Valid control values are 0 = OFF, and 1 = ON. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010 b/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010 new file mode 100644 index 000000000..5b78af5f3 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010 @@ -0,0 +1,9 @@ +What: /sys/bus/iio/devices/iio:deviceX/out_current_heater_raw +What: /sys/bus/iio/devices/iio:deviceX/out_current_heater_raw_available +KernelVersion: 5.3.8 +Contact: linux-iio@vger.kernel.org +Description: + Controls the heater device within the humidity sensor to get + rid of excess condensation. + + Valid control values are 0 = OFF, and 1 = ON. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-icm42600 b/Documentation/ABI/testing/sysfs-bus-iio-icm42600 new file mode 100644 index 000000000..0bf1fd4f5 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-icm42600 @@ -0,0 +1,20 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibbias +What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibbias +What: /sys/bus/iio/devices/iio:deviceX/in_accel_z_calibbias +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibbias +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibbias +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias +KernelVersion: 5.8 +Contact: linux-iio@vger.kernel.org +Description: + Hardware applied calibration offset (assumed to fix production + inaccuracies). Values represent a real physical offset expressed + in SI units (m/s^2 for accelerometer and rad/s for gyroscope). + +What: /sys/bus/iio/devices/iio:deviceX/in_accel_calibbias_available +What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_calibbias_available +KernelVersion: 5.8 +Contact: linux-iio@vger.kernel.org +Description: + Range of available values for hardware offset. Values in SI + units (m/s^2 for accelerometer and rad/s for gyroscope). diff --git a/Documentation/ABI/testing/sysfs-bus-iio-impedance-analyzer-ad5933 b/Documentation/ABI/testing/sysfs-bus-iio-impedance-analyzer-ad5933 new file mode 100644 index 000000000..0e86747c6 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-impedance-analyzer-ad5933 @@ -0,0 +1,35 @@ +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency_start +Date: March 2019 +KernelVersion: 3.1.0 +Contact: linux-iio@vger.kernel.org +Description: + Frequency sweep start frequency in Hz. + +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency_increment +Date: March 2019 +KernelVersion: 3.1.0 +Contact: linux-iio@vger.kernel.org +Description: + Frequency increment in Hz (step size) between consecutive + frequency points along the sweep. + +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency_points +Date: March 2019 +KernelVersion: 3.1.0 +Contact: linux-iio@vger.kernel.org +Description: + Number of frequency points (steps) in the frequency sweep. + This value, in conjunction with the + out_altvoltageY_frequency_start and the + out_altvoltageY_frequency_increment, determines the frequency + sweep range for the sweep operation. + +What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_settling_cycles +Date: March 2019 +KernelVersion: 3.1.0 +Contact: linux-iio@vger.kernel.org +Description: + Number of output excitation cycles (settling time cycles) + that are allowed to pass through the unknown impedance, + after each frequency increment, and before the ADC is triggered + to perform a conversion sequence of the response signal. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc b/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc new file mode 100644 index 000000000..8916f7ec6 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc @@ -0,0 +1,24 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_allow_async_readout +Date: December 2015 +KernelVersion: 4.4 +Contact: linux-iio@vger.kernel.org +Description: + By default (value '0'), the capture thread checks for the Conversion + Ready Flag to being set prior to committing a new value to the sample + buffer. This synchronizes the in-chip conversion rate with the + in-driver readout rate at the cost of an additional register read. + + Writing '1' will remove the polling for the Conversion Ready Flags to + save the additional i2c transaction, which will improve the bandwidth + available for reading data. However, samples can be occasionally skipped + or repeated, depending on the beat between the capture and conversion + rates. + +What: /sys/bus/iio/devices/iio:deviceX/in_shunt_resistor +Date: December 2015 +KernelVersion: 4.4 +Contact: linux-iio@vger.kernel.org +Description: + The value of the shunt resistor may be known only at runtime fom an + eeprom content read by a client application. This attribute allows to + set its value in ohms. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-isl29501 b/Documentation/ABI/testing/sysfs-bus-iio-isl29501 new file mode 100644 index 000000000..d009cfbbd --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-isl29501 @@ -0,0 +1,47 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_agc_gain +What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_agc_gain_bias +KernelVersion: 4.18 +Contact: linux-iio@vger.kernel.org +Description: + This sensor has an automatic gain control (agc) loop + which sets the analog signal levels at an optimum + level by controlling programmable gain amplifiers. The + criteria for optimal gain is determined by the sensor. + + Return the actual gain value as an integer in [0; 65536] + range when read from. + + The agc gain read when measuring crosstalk shall be + written into in_proximity0_agc_gain_bias. + +What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calib_phase_temp_a +What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calib_phase_temp_b +What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calib_phase_light_a +What: /sys/bus/iio/devices/iio:deviceX/in_proximity0_calib_phase_light_b +KernelVersion: 4.18 +Contact: linux-iio@vger.kernel.org +Description: + The sensor is able to perform correction of distance + measurements due to changing temperature and ambient + light conditions. It can be programmed to correct for + a second order error polynomial. + + Phase data has to be collected when temperature and + ambient light are modulated independently. + + Then a least squares curve fit to a second order + polynomial has to be generated from the data. The + resultant curves have the form ax^2 + bx + c. + + From those two curves, a and b coefficients shall be + stored in in_proximity0_calib_phase_temp_a and + in_proximity0_calib_phase_temp_b for temperature and + in in_proximity0_calib_phase_light_a and + in_proximity0_calib_phase_light_b for ambient light. + + Those values must be integer in [0; 8355840] range. + + Finally, the c constant is set by the sensor + internally. + + The value stored in sensor is displayed when read from. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-light-isl29018 b/Documentation/ABI/testing/sysfs-bus-iio-light-isl29018 new file mode 100644 index 000000000..220206a20 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-light-isl29018 @@ -0,0 +1,21 @@ +What: /sys/bus/iio/devices/iio:deviceX/proximity_on_chip_ambient_infrared_suppression +Date: January 2011 +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + From ISL29018 Data Sheet (FN6619.4, Oct 8, 2012) regarding the + infrared suppression: + + Scheme 0, makes full n (4, 8, 12, 16) bits (unsigned) proximity + detection. The range of Scheme 0 proximity count is from 0 to + 2^n. Logic 1 of this bit, Scheme 1, makes n-1 (3, 7, 11, 15) + bits (2's complementary) proximity_less_ambient detection. The + range of Scheme 1 proximity count is from -2^(n-1) to 2^(n-1). + The sign bit is extended for resolutions less than 16. While + Scheme 0 has wider dynamic range, Scheme 1 proximity detection + is less affected by the ambient IR noise variation. + + == ============================================= + 0 Sensing IR from LED and ambient + 1 Sensing IR from LED with ambient IR rejection + == ============================================= diff --git a/Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als b/Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als new file mode 100644 index 000000000..22c5ea670 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-light-lm3533-als @@ -0,0 +1,61 @@ +What: /sys/.../events/in_illuminance0_thresh_either_en +Date: April 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Event generated when channel passes one of the four thresholds + in each direction (rising|falling) and a zone change occurs. + The corresponding light zone can be read from + in_illuminance0_zone. + +What: /sys/.../events/in_illuminance0_threshY_hysteresis +Date: May 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Get the hysteresis for thresholds Y, that is, + threshY_hysteresis = threshY_raising - threshY_falling + +What: /sys/.../events/illuminance_threshY_falling_value +What: /sys/.../events/illuminance_threshY_raising_value +Date: April 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Specifies the value of threshold that the device is comparing + against for the events enabled by + in_illuminance0_thresh_either_en (0..255), where Y in 0..3. + + Note that threshY_falling must be less than or equal to + threshY_raising. + + These thresholds correspond to the eight zone-boundary + registers (boundaryY_{low,high}) and define the five light + zones. + +What: /sys/bus/iio/devices/iio:deviceX/in_illuminance0_zone +Date: April 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Get the current light zone (0..4) as defined by the + in_illuminance0_threshY_{falling,rising} thresholds. + +What: /sys/bus/iio/devices/iio:deviceX/out_currentY_raw +Date: May 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Get output current for channel Y (0..255), that is, + out_currentY_currentZ_raw, where Z is the current zone. + +What: /sys/bus/iio/devices/iio:deviceX/out_currentY_currentZ_raw +Date: May 2012 +KernelVersion: 3.5 +Contact: Johan Hovold <jhovold@gmail.com> +Description: + Set the output current for channel out_currentY when in zone + Z (0..255), where Y in 0..2 and Z in 0..4. + + These values correspond to the ALS-mapper target registers for + ALS-mapper Y + 1. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-light-si1133 b/Documentation/ABI/testing/sysfs-bus-iio-light-si1133 new file mode 100644 index 000000000..6f130cdb2 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-light-si1133 @@ -0,0 +1,22 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_ir_small_raw +KernelVersion: 4.18 +Contact: linux-iio@vger.kernel.org +Description: + Unit-less infrared intensity. The intensity is measured from 1 + dark photodiode. "small" indicate the surface area capturing + infrared. + +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_ir_large_raw +KernelVersion: 4.18 +Contact: linux-iio@vger.kernel.org +Description: + Unit-less infrared intensity. The intensity is measured from 4 + dark photodiodes. "large" indicate the surface area capturing + infrared. + +What: /sys/bus/iio/devices/iio:deviceX/in_intensity_large_raw +KernelVersion: 4.18 +Contact: linux-iio@vger.kernel.org +Description: + Unit-less light intensity with more diodes. + diff --git a/Documentation/ABI/testing/sysfs-bus-iio-light-tsl2583 b/Documentation/ABI/testing/sysfs-bus-iio-light-tsl2583 new file mode 100644 index 000000000..a2e19964e --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-light-tsl2583 @@ -0,0 +1,20 @@ +What: /sys/bus/iio/devices/device[n]/in_illuminance_calibrate +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + This property causes an internal calibration of the als gain trim + value which is later used in calculating illuminance in lux. + +What: /sys/bus/iio/devices/device[n]/in_illuminance_lux_table +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + This property gets/sets the table of coefficients + used in calculating illuminance in lux. + +What: /sys/bus/iio/devices/device[n]/in_illuminance_input_target +KernelVersion: 2.6.37 +Contact: linux-iio@vger.kernel.org +Description: + This property is the known externally illuminance (in lux). + It is used in the process of calibrating the device accuracy. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-light-tsl2772 b/Documentation/ABI/testing/sysfs-bus-iio-light-tsl2772 new file mode 100644 index 000000000..b2798b258 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-light-tsl2772 @@ -0,0 +1,13 @@ +What: /sys/bus/iio/devices/device[n]/in_illuminance0_calibrate +KernelVersion: 3.3-rc1 +Contact: linux-iio@vger.kernel.org +Description: + Causes an internal calibration of the als gain trim + value which is later used in calculating illuminance in lux. + +What: /sys/bus/iio/devices/device[n]/in_proximity0_calibrate +KernelVersion: 3.3-rc1 +Contact: linux-iio@vger.kernel.org +Description: + Causes a recalculation and adjustment to the + proximity_thresh_rising_value. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-magnetometer-hmc5843 b/Documentation/ABI/testing/sysfs-bus-iio-magnetometer-hmc5843 new file mode 100644 index 000000000..13f099ef6 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-magnetometer-hmc5843 @@ -0,0 +1,20 @@ +What: /sys/bus/iio/devices/iio:deviceX/meas_conf +What: /sys/bus/iio/devices/iio:deviceX/meas_conf_available +KernelVersion: 4.5 +Contact: linux-iio@vger.kernel.org +Description: + Current configuration and available configurations + for the bias current. + + ============ ============================================ + normal Normal measurement configurations (default) + positivebias Positive bias configuration + negativebias Negative bias configuration + disabled Only available on HMC5983. Disables magnetic + sensor and enables temperature sensor. + ============ ============================================ + + Note: + The effect of this configuration may vary + according to the device. For exact documentation + check the device's datasheet. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-meas-spec b/Documentation/ABI/testing/sysfs-bus-iio-meas-spec new file mode 100644 index 000000000..6d47e548e --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-meas-spec @@ -0,0 +1,7 @@ +What: /sys/bus/iio/devices/iio:deviceX/battery_low +KernelVersion: 4.1.0 +Contact: linux-iio@vger.kernel.org +Description: + Reading returns either '1' or '0'. '1' means that the + battery level supplied to sensor is below 2.25V. + This ABI is available for tsys02d, htu21, ms8607 diff --git a/Documentation/ABI/testing/sysfs-bus-iio-mpu6050 b/Documentation/ABI/testing/sysfs-bus-iio-mpu6050 new file mode 100644 index 000000000..cb53737aa --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-mpu6050 @@ -0,0 +1,13 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_gyro_matrix +What: /sys/bus/iio/devices/iio:deviceX/in_accel_matrix +What: /sys/bus/iio/devices/iio:deviceX/in_magn_matrix +KernelVersion: 3.4.0 +Contact: linux-iio@vger.kernel.org +Description: + This is mounting matrix for motion sensors. Mounting matrix + is a 3x3 unitary matrix. A typical mounting matrix would look like + [0, 1, 0; 1, 0, 0; 0, 0, -1]. Using this information, it would be + easy to tell the relative positions among sensors as well as their + positions relative to the board that holds these sensors. Identity matrix + [1, 0, 0; 0, 1, 0; 0, 0, 1] means sensor chip and device are perfectly + aligned with each other. All axes are exactly the same. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-potentiometer-mcp4531 b/Documentation/ABI/testing/sysfs-bus-iio-potentiometer-mcp4531 new file mode 100644 index 000000000..2a91fbe39 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-potentiometer-mcp4531 @@ -0,0 +1,8 @@ +What: /sys/bus/iio/devices/iio:deviceX/out_resistance_raw_available +Date: October 2016 +KernelVersion: 4.9 +Contact: Peter Rosin <peda@axentia.se> +Description: + The range of available values represented as the minimum value, + the step and the maximum value, all enclosed in square brackets. + Example: [0 1 256] diff --git a/Documentation/ABI/testing/sysfs-bus-iio-proximity b/Documentation/ABI/testing/sysfs-bus-iio-proximity new file mode 100644 index 000000000..2172f3bb9 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-proximity @@ -0,0 +1,10 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_proximity_nearlevel +Date: March 2020 +KernelVersion: 5.7 +Contact: linux-iio@vger.kernel.org +Description: + Near level for proximity sensors. This is a single integer + value that tells user space when an object should be + considered close to the device. If the value read from the + sensor is above or equal to the value in this file an object + should typically be considered near. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 new file mode 100644 index 000000000..c59d95346 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 @@ -0,0 +1,24 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_proximity_input +Date: March 2014 +KernelVersion: 3.15 +Contact: Matt Ranostay <matt.ranostay@konsulko.com> +Description: + Get the current distance in meters of storm (1km steps) + 1000-40000 = distance in meters + +What: /sys/bus/iio/devices/iio:deviceX/sensor_sensitivity +Date: March 2014 +KernelVersion: 3.15 +Contact: Matt Ranostay <matt.ranostay@konsulko.com> +Description: + Show or set the gain boost of the amp, from 0-31 range. + 18 = indoors (default) + 14 = outdoors + +What /sys/bus/iio/devices/iio:deviceX/noise_level_tripped +Date: May 2017 +KernelVersion: 4.13 +Contact: Matt Ranostay <matt.ranostay@konsulko.com> +Description: + When 1 the noise level is over the trip level and not reporting + valid data diff --git a/Documentation/ABI/testing/sysfs-bus-iio-scd30 b/Documentation/ABI/testing/sysfs-bus-iio-scd30 new file mode 100644 index 000000000..b9712f390 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-scd30 @@ -0,0 +1,34 @@ +What: /sys/bus/iio/devices/iio:deviceX/calibration_auto_enable +Date: June 2020 +KernelVersion: 5.8 +Contact: linux-iio@vger.kernel.org +Description: + Contaminants build-up in the measurement chamber or optical + elements deterioration leads to sensor drift. + + One can compensate for sensor drift by using automatic self + calibration procedure (asc). + + Writing 1 or 0 to this attribute will respectively activate or + deactivate asc. + + Upon reading current asc status is returned. + +What: /sys/bus/iio/devices/iio:deviceX/calibration_forced_value +Date: June 2020 +KernelVersion: 5.8 +Contact: linux-iio@vger.kernel.org +Description: + Contaminants build-up in the measurement chamber or optical + elements deterioration leads to sensor drift. + + One can compensate for sensor drift by using forced + recalibration (frc). This is useful in case there's known + co2 reference available nearby the sensor. + + Picking value from the range [400 1 2000] and writing it to the + sensor will set frc. + + Upon reading current frc value is returned. Note that after + power cycling default value (i.e 400) is returned even though + internally sensor had recalibrated itself. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-sps30 b/Documentation/ABI/testing/sysfs-bus-iio-sps30 new file mode 100644 index 000000000..06e1c2725 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-sps30 @@ -0,0 +1,28 @@ +What: /sys/bus/iio/devices/iio:deviceX/start_cleaning +Date: December 2018 +KernelVersion: 5.0 +Contact: linux-iio@vger.kernel.org +Description: + Writing 1 starts sensor self cleaning. Internal fan accelerates + to its maximum speed and keeps spinning for about 10 seconds in + order to blow out accumulated dust. + +What: /sys/bus/iio/devices/iio:deviceX/cleaning_period +Date: January 2019 +KernelVersion: 5.1 +Contact: linux-iio@vger.kernel.org +Description: + Sensor is capable of triggering self cleaning periodically. + Period can be changed by writing a new value here. Upon reading + the current one is returned. Units are seconds. + + Writing 0 disables periodical self cleaning entirely. + +What: /sys/bus/iio/devices/iio:deviceX/cleaning_period_available +Date: January 2019 +KernelVersion: 5.1 +Contact: linux-iio@vger.kernel.org +Description: + The range of available values in seconds represented as the + minimum value, the step and the maximum value, all enclosed in + square brackets. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-sx9310 b/Documentation/ABI/testing/sysfs-bus-iio-sx9310 new file mode 100644 index 000000000..3ac775901 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-sx9310 @@ -0,0 +1,10 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_proximity3_comb_raw +Date: February 2019 +KernelVersion: 5.6 +Contact: Daniel Campello <campello@chromium.org> +Description: + Proximity measurement indicating that some object is + near the combined sensor. The combined sensor presents + proximity measurements constructed by hardware by + combining measurements taken from a given set of + physical sensors. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856 b/Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856 new file mode 100644 index 000000000..e5ef6d8e5 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856 @@ -0,0 +1,31 @@ +What: /sys/bus/iio/devices/iio:deviceX/fault_oc +KernelVersion: 5.1 +Contact: linux-iio@vger.kernel.org +Description: + Open-circuit fault. The detection of open-circuit faults, + such as those caused by broken thermocouple wires. + Reading returns either '1' or '0'. + + === ======================================================= + '1' An open circuit such as broken thermocouple wires + has been detected. + '0' No open circuit or broken thermocouple wires are detected + === ======================================================= + +What: /sys/bus/iio/devices/iio:deviceX/fault_ovuv +KernelVersion: 5.1 +Contact: linux-iio@vger.kernel.org +Description: + Overvoltage or Undervoltage Input Fault. The internal circuitry + is protected from excessive voltages applied to the thermocouple + cables by integrated MOSFETs at the T+ and T- inputs, and the + BIAS output. These MOSFETs turn off when the input voltage is + negative or greater than VDD. + + Reading returns either '1' or '0'. + + === ======================================================= + '1' The input voltage is negative or greater than VDD. + '0' The input voltage is positive and less than VDD (normal + state). + === ======================================================= diff --git a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 new file mode 100644 index 000000000..c4a4497c2 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 @@ -0,0 +1,151 @@ +What: /sys/bus/iio/devices/triggerX/master_mode_available +KernelVersion: 4.11 +Contact: benjamin.gaignard@st.com +Description: + Reading returns the list possible master modes which are: + + + - "reset" + The UG bit from the TIMx_EGR register is + used as trigger output (TRGO). + - "enable" + The Counter Enable signal CNT_EN is used + as trigger output. + - "update" + The update event is selected as trigger output. + For instance a master timer can then be used + as a prescaler for a slave timer. + - "compare_pulse" + The trigger output send a positive pulse + when the CC1IF flag is to be set. + - "OC1REF" + OC1REF signal is used as trigger output. + - "OC2REF" + OC2REF signal is used as trigger output. + - "OC3REF" + OC3REF signal is used as trigger output. + - "OC4REF" + OC4REF signal is used as trigger output. + + Additional modes (on TRGO2 only): + + - "OC5REF" + OC5REF signal is used as trigger output. + - "OC6REF" + OC6REF signal is used as trigger output. + - "compare_pulse_OC4REF": + OC4REF rising or falling edges generate pulses. + - "compare_pulse_OC6REF": + OC6REF rising or falling edges generate pulses. + - "compare_pulse_OC4REF_r_or_OC6REF_r": + OC4REF or OC6REF rising edges generate pulses. + - "compare_pulse_OC4REF_r_or_OC6REF_f": + OC4REF rising or OC6REF falling edges generate + pulses. + - "compare_pulse_OC5REF_r_or_OC6REF_r": + OC5REF or OC6REF rising edges generate pulses. + - "compare_pulse_OC5REF_r_or_OC6REF_f": + OC5REF rising or OC6REF falling edges generate + pulses. + + :: + + +-----------+ +-------------+ +---------+ + | Prescaler +-> | Counter | +-> | Master | TRGO(2) + +-----------+ +--+--------+-+ |-> | Control +--> + | | || +---------+ + +--v--------+-+ OCxREF || +---------+ + | Chx compare +----------> | Output | ChX + +-----------+-+ | | Control +--> + . | | +---------+ + . | | . + +-----------v-+ OC6REF | . + | Ch6 compare +---------+> + +-------------+ + + Example with: "compare_pulse_OC4REF_r_or_OC6REF_r":: + + X + X X + X . . X + X . . X + X . . X + count X . . . . X + . . . . + . . . . + +---------------+ + OC4REF | . . | + +-+ . . +-+ + . +---+ . + OC6REF . | | . + +-------+ +-------+ + +-+ +-+ + TRGO2 | | | | + +-+ +---+ +---------+ + +What: /sys/bus/iio/devices/triggerX/master_mode +KernelVersion: 4.11 +Contact: benjamin.gaignard@st.com +Description: + Reading returns the current master modes. + Writing set the master mode + +What: /sys/bus/iio/devices/triggerX/sampling_frequency +KernelVersion: 4.11 +Contact: benjamin.gaignard@st.com +Description: + Reading returns the current sampling frequency. + Writing an value different of 0 set and start sampling. + Writing 0 stop sampling. + +What: /sys/bus/iio/devices/iio:deviceX/in_count0_preset +KernelVersion: 4.12 +Contact: benjamin.gaignard@st.com +Description: + Reading returns the current preset value. + Writing sets the preset value. + When counting up the counter starts from 0 and fires an + event when reach preset value. + When counting down the counter start from preset value + and fire event when reach 0. + +What: /sys/bus/iio/devices/iio:deviceX/in_count_enable_mode_available +KernelVersion: 4.12 +Contact: benjamin.gaignard@st.com +Description: + Reading returns the list possible enable modes. + +What: /sys/bus/iio/devices/iio:deviceX/in_count0_enable_mode +KernelVersion: 4.12 +Contact: benjamin.gaignard@st.com +Description: + Configure the device counter enable modes, in all case + counting direction is set by in_count0_count_direction + attribute and the counter is clocked by the internal clock. + + always: + Counter is always ON. + + gated: + Counting is enabled when connected trigger signal + level is high else counting is disabled. + + triggered: + Counting is enabled on rising edge of the connected + trigger, and remains enabled for the duration of this + selected mode. + +What: /sys/bus/iio/devices/iio:deviceX/in_count_trigger_mode_available +KernelVersion: 4.13 +Contact: benjamin.gaignard@st.com +Description: + Reading returns the list possible trigger modes. + +What: /sys/bus/iio/devices/iio:deviceX/in_count0_trigger_mode +KernelVersion: 4.13 +Contact: benjamin.gaignard@st.com +Description: + Configure the device counter trigger mode + counting direction is set by in_count0_count_direction + attribute and the counter is clocked by the connected trigger + rising edges. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs b/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs new file mode 100644 index 000000000..04ac62305 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs @@ -0,0 +1,42 @@ +What: /sys/bus/iio/devices/triggerX/trigger_now +KernelVersion: 2.6.38 +Contact: linux-iio@vger.kernel.org +Description: + This file is provided by the iio-trig-sysfs stand-alone trigger + driver. Writing this file with any value triggers an event + driven driver, associated with this trigger, to capture data + into an in kernel buffer. This approach can be valuable during + automated testing or in situations, where other trigger methods + are not applicable. For example no RTC or spare GPIOs. + X is the IIO index of the trigger. + +What: /sys/bus/iio/devices/triggerX/name +KernelVersion: 2.6.39 +Contact: linux-iio@vger.kernel.org +Description: + The name attribute holds a description string for the current + trigger. In order to associate the trigger with an IIO device + one should write this name string to + /sys/bus/iio/devices/iio:deviceY/trigger/current_trigger. + +What: /sys/bus/iio/devices/iio_sysfs_trigger/add_trigger +KernelVersion: 2.6.39 +Contact: linux-iio@vger.kernel.org +Description: + This attribute is provided by the iio-trig-sysfs stand-alone + driver and it is used to activate the creation of a new trigger. + In order to achieve this, one should write a positive integer + into the associated file, which will serve as the id of the + trigger. If the trigger with the specified id is already present + in the system, an invalid argument message will be returned. + +What: /sys/bus/iio/devices/iio_sysfs_trigger/remove_trigger +KernelVersion: 2.6.39 +Contact: linux-iio@vger.kernel.org +Description: + This attribute is used to unregister and delete a previously + created trigger from the list of available triggers. In order to + achieve this, one should write a positive integer into the + associated file, representing the id of the trigger that needs + to be removed. If the trigger can't be found, an invalid + argument message will be returned to the user. diff --git a/Documentation/ABI/testing/sysfs-bus-iio-vf610 b/Documentation/ABI/testing/sysfs-bus-iio-vf610 new file mode 100644 index 000000000..491ead804 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-vf610 @@ -0,0 +1,16 @@ +What: /sys/bus/iio/devices/iio:deviceX/in_conversion_mode +KernelVersion: 4.2 +Contact: linux-iio@vger.kernel.org +Description: + Specifies the hardware conversion mode used. The three + available modes are "normal", "high-speed" and "low-power", + where the last is the default mode. + + +What: /sys/bus/iio/devices/iio:deviceX/out_conversion_mode +KernelVersion: 4.6 +Contact: linux-iio@vger.kernel.org +Description: + Specifies the hardware conversion mode used within DAC. + The two available modes are "high-power" and "low-power", + where "low-power" mode is the default mode. |