diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/ABI/testing/sysfs-power | 427 |
1 files changed, 427 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power new file mode 100644 index 000000000..51c0f578b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-power @@ -0,0 +1,427 @@ +What: /sys/power/ +Date: August 2006 +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Description: + The /sys/power directory will contain files that will + provide a unified interface to the power management + subsystem. + +What: /sys/power/state +Date: November 2016 +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Description: + The /sys/power/state file controls system sleep states. + Reading from this file returns the available sleep state + labels, which may be "mem" (suspend), "standby" (power-on + suspend), "freeze" (suspend-to-idle) and "disk" (hibernation). + + Writing one of the above strings to this file causes the system + to transition into the corresponding state, if available. + + See Documentation/admin-guide/pm/sleep-states.rst for more + information. + +What: /sys/power/mem_sleep +Date: November 2016 +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Description: + The /sys/power/mem_sleep file controls the operating mode of + system suspend. Reading from it returns the available modes + as "s2idle" (always present), "shallow" and "deep" (present if + supported). The mode that will be used on subsequent attempts + to suspend the system (by writing "mem" to the /sys/power/state + file described above) is enclosed in square brackets. + + Writing one of the above strings to this file causes the mode + represented by it to be used on subsequent attempts to suspend + the system. + + See Documentation/admin-guide/pm/sleep-states.rst for more + information. + +What: /sys/power/disk +Date: September 2006 +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Description: + The /sys/power/disk file controls the operating mode of the + suspend-to-disk mechanism. Reading from this file returns + the name of the method by which the system will be put to + sleep on the next suspend. There are four methods supported: + + 'firmware' - means that the memory image will be saved to disk + by some firmware, in which case we also assume that the + firmware will handle the system suspend. + + 'platform' - the memory image will be saved by the kernel and + the system will be put to sleep by the platform driver (e.g. + ACPI or other PM registers). + + 'shutdown' - the memory image will be saved by the kernel and + the system will be powered off. + + 'reboot' - the memory image will be saved by the kernel and + the system will be rebooted. + + Additionally, /sys/power/disk can be used to turn on one of the + two testing modes of the suspend-to-disk mechanism: 'testproc' + or 'test'. If the suspend-to-disk mechanism is in the + 'testproc' mode, writing 'disk' to /sys/power/state will cause + the kernel to disable nonboot CPUs and freeze tasks, wait for 5 + seconds, unfreeze tasks and enable nonboot CPUs. If it is in + the 'test' mode, writing 'disk' to /sys/power/state will cause + the kernel to disable nonboot CPUs and freeze tasks, shrink + memory, suspend devices, wait for 5 seconds, resume devices, + unfreeze tasks and enable nonboot CPUs. Then, we are able to + look in the log messages and work out, for example, which code + is being slow and which device drivers are misbehaving. + + The suspend-to-disk method may be chosen by writing to this + file one of the accepted strings: + + - 'firmware' + - 'platform' + - 'shutdown' + - 'reboot' + - 'testproc' + - 'test' + + It will only change to 'firmware' or 'platform' if the system + supports that. + +What: /sys/power/image_size +Date: August 2006 +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Description: + The /sys/power/image_size file controls the size of the image + created by the suspend-to-disk mechanism. It can be written a + string representing a non-negative integer that will be used + as an upper limit of the image size, in bytes. The kernel's + suspend-to-disk code will do its best to ensure the image size + will not exceed this number. However, if it turns out to be + impossible, the kernel will try to suspend anyway using the + smallest image possible. In particular, if "0" is written to + this file, the suspend image will be as small as possible. + + Reading from this file will display the current image size + limit, which is set to around 2/5 of available RAM by default. + +What: /sys/power/pm_trace +Date: August 2006 +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Description: + The /sys/power/pm_trace file controls the code which saves the + last PM event point in the RTC across reboots, so that you can + debug a machine that just hangs during suspend (or more + commonly, during resume). Namely, the RTC is only used to save + the last PM event point if this file contains '1'. Initially + it contains '0' which may be changed to '1' by writing a + string representing a nonzero integer into it. + + To use this debugging feature you should attempt to suspend + the machine, then reboot it and run:: + + dmesg -s 1000000 | grep 'hash matches' + + If you do not get any matches (or they appear to be false + positives), it is possible that the last PM event point + referred to a device created by a loadable kernel module. In + this case cat /sys/power/pm_trace_dev_match (see below) after + your system is started up and the kernel modules are loaded. + + CAUTION: Using it will cause your machine's real-time (CMOS) + clock to be set to a random invalid time after a resume. + +What; /sys/power/pm_trace_dev_match +Date: October 2010 +Contact: James Hogan <jhogan@kernel.org> +Description: + The /sys/power/pm_trace_dev_match file contains the name of the + device associated with the last PM event point saved in the RTC + across reboots when pm_trace has been used. More precisely it + contains the list of current devices (including those + registered by loadable kernel modules since boot) which match + the device hash in the RTC at boot, with a newline after each + one. + + The advantage of this file over the hash matches printed to the + kernel log (see /sys/power/pm_trace), is that it includes + devices created after boot by loadable kernel modules. + + Due to the small hash size necessary to fit in the RTC, it is + possible that more than one device matches the hash, in which + case further investigation is required to determine which + device is causing the problem. Note that genuine RTC clock + values (such as when pm_trace has not been used), can still + match a device and output it's name here. + +What: /sys/power/pm_async +Date: January 2009 +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Description: + The /sys/power/pm_async file controls the switch allowing the + user space to enable or disable asynchronous suspend and resume + of devices. If enabled, this feature will cause some device + drivers' suspend and resume callbacks to be executed in parallel + with each other and with the main suspend thread. It is enabled + if this file contains "1", which is the default. It may be + disabled by writing "0" to this file, in which case all devices + will be suspended and resumed synchronously. + +What: /sys/power/wakeup_count +Date: July 2010 +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Description: + The /sys/power/wakeup_count file allows user space to put the + system into a sleep state while taking into account the + concurrent arrival of wakeup events. Reading from it returns + the current number of registered wakeup events and it blocks if + some wakeup events are being processed at the time the file is + read from. Writing to it will only succeed if the current + number of wakeup events is equal to the written value and, if + successful, will make the kernel abort a subsequent transition + to a sleep state if any wakeup events are reported after the + write has returned. + +What: /sys/power/reserved_size +Date: May 2011 +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Description: + The /sys/power/reserved_size file allows user space to control + the amount of memory reserved for allocations made by device + drivers during the "device freeze" stage of hibernation. It can + be written a string representing a non-negative integer that + will be used as the amount of memory to reserve for allocations + made by device drivers' "freeze" callbacks, in bytes. + + Reading from this file will display the current value, which is + set to 1 MB by default. + +What: /sys/power/autosleep +Date: April 2012 +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Description: + The /sys/power/autosleep file can be written one of the strings + returned by reads from /sys/power/state. If that happens, a + work item attempting to trigger a transition of the system to + the sleep state represented by that string is queued up. This + attempt will only succeed if there are no active wakeup sources + in the system at that time. After every execution, regardless + of whether or not the attempt to put the system to sleep has + succeeded, the work item requeues itself until user space + writes "off" to /sys/power/autosleep. + + Reading from this file causes the last string successfully + written to it to be returned. + +What: /sys/power/wake_lock +Date: February 2012 +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Description: + The /sys/power/wake_lock file allows user space to create + wakeup source objects and activate them on demand (if one of + those wakeup sources is active, reads from the + /sys/power/wakeup_count file block or return false). When a + string without white space is written to /sys/power/wake_lock, + it will be assumed to represent a wakeup source name. If there + is a wakeup source object with that name, it will be activated + (unless active already). Otherwise, a new wakeup source object + will be registered, assigned the given name and activated. + If a string written to /sys/power/wake_lock contains white + space, the part of the string preceding the white space will be + regarded as a wakeup source name and handled as descrived above. + The other part of the string will be regarded as a timeout (in + nanoseconds) such that the wakeup source will be automatically + deactivated after it has expired. The timeout, if present, is + set regardless of the current state of the wakeup source object + in question. + + Reads from this file return a string consisting of the names of + wakeup sources created with the help of it that are active at + the moment, separated with spaces. + + +What: /sys/power/wake_unlock +Date: February 2012 +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Description: + The /sys/power/wake_unlock file allows user space to deactivate + wakeup sources created with the help of /sys/power/wake_lock. + When a string is written to /sys/power/wake_unlock, it will be + assumed to represent the name of a wakeup source to deactivate. + + If a wakeup source object of that name exists and is active at + the moment, it will be deactivated. + + Reads from this file return a string consisting of the names of + wakeup sources created with the help of /sys/power/wake_lock + that are inactive at the moment, separated with spaces. + +What: /sys/power/pm_print_times +Date: May 2012 +Contact: Sameer Nanda <snanda@chromium.org> +Description: + The /sys/power/pm_print_times file allows user space to + control whether the time taken by devices to suspend and + resume is printed. These prints are useful for hunting down + devices that take too long to suspend or resume. + + Writing a "1" enables this printing while writing a "0" + disables it. The default value is "0". Reading from this file + will display the current value. + +What: /sys/power/pm_wakeup_irq +Date: April 2015 +Contact: Alexandra Yates <alexandra.yates@linux.intel.org> +Description: + The /sys/power/pm_wakeup_irq file reports to user space the IRQ + number of the first wakeup interrupt (that is, the first + interrupt from an IRQ line armed for system wakeup) seen by the + kernel during the most recent system suspend/resume cycle. + + This output is useful for system wakeup diagnostics of spurious + wakeup interrupts. + +What: /sys/power/pm_debug_messages +Date: July 2017 +Contact: Rafael J. Wysocki <rjw@rjwysocki.net> +Description: + The /sys/power/pm_debug_messages file controls the printing + of debug messages from the system suspend/hiberbation + infrastructure to the kernel log. + + Writing a "1" to this file enables the debug messages and + writing a "0" (default) to it disables them. Reads from + this file return the current value. + +What: /sys/power/resume_offset +Date: April 2018 +Contact: Mario Limonciello <mario.limonciello@dell.com> +Description: + This file is used for telling the kernel an offset into a disk + to use when hibernating the system such as with a swap file. + + Reads from this file will display the current offset + the kernel will be using on the next hibernation + attempt. + + Using this sysfs file will override any values that were + set using the kernel command line for disk offset. + +What: /sys/power/suspend_stats +Date: July 2019 +Contact: Kalesh Singh <kaleshsingh96@gmail.com> +Description: + The /sys/power/suspend_stats directory contains suspend related + statistics. + +What: /sys/power/suspend_stats/success +Date: July 2019 +Contact: Kalesh Singh <kaleshsingh96@gmail.com> +Description: + The /sys/power/suspend_stats/success file contains the number + of times entering system sleep state succeeded. + +What: /sys/power/suspend_stats/fail +Date: July 2019 +Contact: Kalesh Singh <kaleshsingh96@gmail.com> +Description: + The /sys/power/suspend_stats/fail file contains the number + of times entering system sleep state failed. + +What: /sys/power/suspend_stats/failed_freeze +Date: July 2019 +Contact: Kalesh Singh <kaleshsingh96@gmail.com> +Description: + The /sys/power/suspend_stats/failed_freeze file contains the + number of times freezing processes failed. + +What: /sys/power/suspend_stats/failed_prepare +Date: July 2019 +Contact: Kalesh Singh <kaleshsingh96@gmail.com> +Description: + The /sys/power/suspend_stats/failed_prepare file contains the + number of times preparing all non-sysdev devices for + a system PM transition failed. + +What: /sys/power/suspend_stats/failed_resume +Date: July 2019 +Contact: Kalesh Singh <kaleshsingh96@gmail.com> +Description: + The /sys/power/suspend_stats/failed_resume file contains the + number of times executing "resume" callbacks of + non-sysdev devices failed. + +What: /sys/power/suspend_stats/failed_resume_early +Date: July 2019 +Contact: Kalesh Singh <kaleshsingh96@gmail.com> +Description: + The /sys/power/suspend_stats/failed_resume_early file contains + the number of times executing "early resume" callbacks + of devices failed. + +What: /sys/power/suspend_stats/failed_resume_noirq +Date: July 2019 +Contact: Kalesh Singh <kaleshsingh96@gmail.com> +Description: + The /sys/power/suspend_stats/failed_resume_noirq file contains + the number of times executing "noirq resume" callbacks + of devices failed. + +What: /sys/power/suspend_stats/failed_suspend +Date: July 2019 +Contact: Kalesh Singh <kaleshsingh96@gmail.com> +Description: + The /sys/power/suspend_stats/failed_suspend file contains + the number of times executing "suspend" callbacks + of all non-sysdev devices failed. + +What: /sys/power/suspend_stats/failed_suspend_late +Date: July 2019 +Contact: Kalesh Singh <kaleshsingh96@gmail.com> +Description: + The /sys/power/suspend_stats/failed_suspend_late file contains + the number of times executing "late suspend" callbacks + of all devices failed. + +What: /sys/power/suspend_stats/failed_suspend_noirq +Date: July 2019 +Contact: Kalesh Singh <kaleshsingh96@gmail.com> +Description: + The /sys/power/suspend_stats/failed_suspend_noirq file contains + the number of times executing "noirq suspend" callbacks + of all devices failed. + +What: /sys/power/suspend_stats/last_failed_dev +Date: July 2019 +Contact: Kalesh Singh <kaleshsingh96@gmail.com> +Description: + The /sys/power/suspend_stats/last_failed_dev file contains + the last device for which a suspend/resume callback failed. + +What: /sys/power/suspend_stats/last_failed_errno +Date: July 2019 +Contact: Kalesh Singh <kaleshsingh96@gmail.com> +Description: + The /sys/power/suspend_stats/last_failed_errno file contains + the errno of the last failed attempt at entering + system sleep state. + +What: /sys/power/suspend_stats/last_failed_step +Date: July 2019 +Contact: Kalesh Singh <kaleshsingh96@gmail.com> +Description: + The /sys/power/suspend_stats/last_failed_step file contains + the last failed step in the suspend/resume path. + +What: /sys/power/sync_on_suspend +Date: October 2019 +Contact: Jonas Meurer <jonas@freesources.org> +Description: + This file controls whether or not the kernel will sync() + filesystems during system suspend (after freezing user space + and before suspending devices). + + Writing a "1" to this file enables the sync() and writing a "0" + disables it. Reads from the file return the current value. + The default is "1" if the build-time "SUSPEND_SKIP_SYNC" config + flag is unset, or "0" otherwise. |