diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/admin-guide/device-mapper/dm-service-time.rst | 101 |
1 files changed, 101 insertions, 0 deletions
diff --git a/Documentation/admin-guide/device-mapper/dm-service-time.rst b/Documentation/admin-guide/device-mapper/dm-service-time.rst new file mode 100644 index 000000000..facf277fc --- /dev/null +++ b/Documentation/admin-guide/device-mapper/dm-service-time.rst @@ -0,0 +1,101 @@ +=============== +dm-service-time +=============== + +dm-service-time is a path selector module for device-mapper targets, +which selects a path with the shortest estimated service time for +the incoming I/O. + +The service time for each path is estimated by dividing the total size +of in-flight I/Os on a path with the performance value of the path. +The performance value is a relative throughput value among all paths +in a path-group, and it can be specified as a table argument. + +The path selector name is 'service-time'. + +Table parameters for each path: + + [<repeat_count> [<relative_throughput>]] + <repeat_count>: + The number of I/Os to dispatch using the selected + path before switching to the next path. + If not given, internal default is used. To check + the default value, see the activated table. + <relative_throughput>: + The relative throughput value of the path + among all paths in the path-group. + The valid range is 0-100. + If not given, minimum value '1' is used. + If '0' is given, the path isn't selected while + other paths having a positive value are available. + +Status for each path: + + <status> <fail-count> <in-flight-size> <relative_throughput> + <status>: + 'A' if the path is active, 'F' if the path is failed. + <fail-count>: + The number of path failures. + <in-flight-size>: + The size of in-flight I/Os on the path. + <relative_throughput>: + The relative throughput value of the path + among all paths in the path-group. + + +Algorithm +========= + +dm-service-time adds the I/O size to 'in-flight-size' when the I/O is +dispatched and subtracts when completed. +Basically, dm-service-time selects a path having minimum service time +which is calculated by:: + + ('in-flight-size' + 'size-of-incoming-io') / 'relative_throughput' + +However, some optimizations below are used to reduce the calculation +as much as possible. + + 1. If the paths have the same 'relative_throughput', skip + the division and just compare the 'in-flight-size'. + + 2. If the paths have the same 'in-flight-size', skip the division + and just compare the 'relative_throughput'. + + 3. If some paths have non-zero 'relative_throughput' and others + have zero 'relative_throughput', ignore those paths with zero + 'relative_throughput'. + +If such optimizations can't be applied, calculate service time, and +compare service time. +If calculated service time is equal, the path having maximum +'relative_throughput' may be better. So compare 'relative_throughput' +then. + + +Examples +======== +In case that 2 paths (sda and sdb) are used with repeat_count == 128 +and sda has an average throughput 1GB/s and sdb has 4GB/s, +'relative_throughput' value may be '1' for sda and '4' for sdb:: + + # echo "0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 1 8:16 128 4" \ + dmsetup create test + # + # dmsetup table + test: 0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 1 8:16 128 4 + # + # dmsetup status + test: 0 10 multipath 2 0 0 0 1 1 E 0 2 2 8:0 A 0 0 1 8:16 A 0 0 4 + + +Or '2' for sda and '8' for sdb would be also true:: + + # echo "0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 2 8:16 128 8" \ + dmsetup create test + # + # dmsetup table + test: 0 10 multipath 0 0 1 1 service-time 0 2 2 8:0 128 2 8:16 128 8 + # + # dmsetup status + test: 0 10 multipath 2 0 0 0 1 1 E 0 2 2 8:0 A 0 0 2 8:16 A 0 0 8 |