1 files changed, 190 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/clock/exynos5260-clock.txt b/Documentation/devicetree/bindings/clock/exynos5260-clock.txt
new file mode 100644
index 000000000..c79d31f7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/exynos5260-clock.txt
@@ -0,0 +1,190 @@
+* Samsung Exynos5260 Clock Controller
+
+Exynos5260 has 13 clock controllers which are instantiated
+independently from the device-tree. These clock controllers
+generate and supply clocks to various hardware blocks within
+the SoC.
+
+Each clock is assigned an identifier and client nodes can use
+this identifier to specify the clock which they consume. All
+available clocks are defined as preprocessor macros in
+dt-bindings/clock/exynos5260-clk.h header and can be used in
+device tree sources.
+
+External clocks:
+
+There are several clocks that are generated outside the SoC. It
+is expected that they are defined using standard clock bindings
+with following clock-output-names:
+
+ - "fin_pll" - PLL input clock from XXTI
+ - "xrtcxti" - input clock from XRTCXTI
+ - "ioclk_pcm_extclk" - pcm external operation clock
+ - "ioclk_spdif_extclk" - spdif external operation clock
+ - "ioclk_i2s_cdclk" - i2s0 codec clock
+
+Phy clocks:
+
+There are several clocks which are generated by specific PHYs.
+These clocks are fed into the clock controller and then routed to
+the hardware blocks. These clocks are defined as fixed clocks in the
+driver with following names:
+
+ - "phyclk_dptx_phy_ch3_txd_clk" - dp phy clock for channel 3
+ - "phyclk_dptx_phy_ch2_txd_clk" - dp phy clock for channel 2
+ - "phyclk_dptx_phy_ch1_txd_clk" - dp phy clock for channel 1
+ - "phyclk_dptx_phy_ch0_txd_clk" - dp phy clock for channel 0
+ - "phyclk_hdmi_phy_tmds_clko" - hdmi phy tmds clock
+ - "phyclk_hdmi_phy_pixel_clko" - hdmi phy pixel clock
+ - "phyclk_hdmi_link_o_tmds_clkhi" - hdmi phy for hdmi link
+ - "phyclk_dptx_phy_o_ref_clk_24m" - dp phy reference clock
+ - "phyclk_dptx_phy_clk_div2"
+ - "phyclk_mipi_dphy_4l_m_rxclkesc0"
+ - "phyclk_usbhost20_phy_phyclock" - usb 2.0 phy clock
+ - "phyclk_usbhost20_phy_freeclk"
+ - "phyclk_usbhost20_phy_clk48mohci"
+ - "phyclk_usbdrd30_udrd30_pipe_pclk"
+ - "phyclk_usbdrd30_udrd30_phyclock" - usb 3.0 phy clock
+
+Required Properties for Clock Controller:
+
+ - compatible: should be one of the following.
+	1) "samsung,exynos5260-clock-top"
+	2) "samsung,exynos5260-clock-peri"
+	3) "samsung,exynos5260-clock-egl"
+	4) "samsung,exynos5260-clock-kfc"
+	5) "samsung,exynos5260-clock-g2d"
+	6) "samsung,exynos5260-clock-mif"
+	7) "samsung,exynos5260-clock-mfc"
+	8) "samsung,exynos5260-clock-g3d"
+	9) "samsung,exynos5260-clock-fsys"
+	10) "samsung,exynos5260-clock-aud"
+	11) "samsung,exynos5260-clock-isp"
+	12) "samsung,exynos5260-clock-gscl"
+	13) "samsung,exynos5260-clock-disp"
+
+ - reg: physical base address of the controller and the length of
+	memory mapped region.
+
+ - #clock-cells: should be 1.
+
+ - clocks: list of clock identifiers which are fed as the input to
+	the given clock controller. Please refer the next section to find
+	the input clocks for a given controller.
+
+ - clock-names: list of names of clocks which are fed as the input
+	to the given clock controller.
+
+Input clocks for top clock controller:
+	- fin_pll
+	- dout_mem_pll
+	- dout_bus_pll
+	- dout_media_pll
+
+Input clocks for peri clock controller:
+	- fin_pll
+	- ioclk_pcm_extclk
+	- ioclk_i2s_cdclk
+	- ioclk_spdif_extclk
+	- phyclk_hdmi_phy_ref_cko
+	- dout_aclk_peri_66
+	- dout_sclk_peri_uart0
+	- dout_sclk_peri_uart1
+	- dout_sclk_peri_uart2
+	- dout_sclk_peri_spi0_b
+	- dout_sclk_peri_spi1_b
+	- dout_sclk_peri_spi2_b
+	- dout_aclk_peri_aud
+	- dout_sclk_peri_spi0_b
+
+Input clocks for egl clock controller:
+	- fin_pll
+	- dout_bus_pll
+
+Input clocks for kfc clock controller:
+	- fin_pll
+	- dout_media_pll
+
+Input clocks for g2d clock controller:
+	- fin_pll
+	- dout_aclk_g2d_333
+
+Input clocks for mif clock controller:
+	- fin_pll
+
+Input clocks for mfc clock controller:
+	- fin_pll
+	- dout_aclk_mfc_333
+
+Input clocks for g3d clock controller:
+	- fin_pll
+
+Input clocks for fsys clock controller:
+	- fin_pll
+	- phyclk_usbhost20_phy_phyclock
+	- phyclk_usbhost20_phy_freeclk
+	- phyclk_usbhost20_phy_clk48mohci
+	- phyclk_usbdrd30_udrd30_pipe_pclk
+	- phyclk_usbdrd30_udrd30_phyclock
+	- dout_aclk_fsys_200
+
+Input clocks for aud clock controller:
+	- fin_pll
+	- fout_aud_pll
+	- ioclk_i2s_cdclk
+	- ioclk_pcm_extclk
+
+Input clocks for isp clock controller:
+	- fin_pll
+	- dout_aclk_isp1_266
+	- dout_aclk_isp1_400
+	- mout_aclk_isp1_266
+
+Input clocks for gscl clock controller:
+	- fin_pll
+	- dout_aclk_gscl_400
+	- dout_aclk_gscl_333
+
+Input clocks for disp clock controller:
+	- fin_pll
+	- phyclk_dptx_phy_ch3_txd_clk
+	- phyclk_dptx_phy_ch2_txd_clk
+	- phyclk_dptx_phy_ch1_txd_clk
+	- phyclk_dptx_phy_ch0_txd_clk
+	- phyclk_hdmi_phy_tmds_clko
+	- phyclk_hdmi_phy_ref_clko
+	- phyclk_hdmi_phy_pixel_clko
+	- phyclk_hdmi_link_o_tmds_clkhi
+	- phyclk_mipi_dphy_4l_m_txbyte_clkhs
+	- phyclk_dptx_phy_o_ref_clk_24m
+	- phyclk_dptx_phy_clk_div2
+	- phyclk_mipi_dphy_4l_m_rxclkesc0
+	- phyclk_hdmi_phy_ref_cko
+	- ioclk_spdif_extclk
+	- dout_aclk_peri_aud
+	- dout_aclk_disp_222
+	- dout_sclk_disp_pixel
+	- dout_aclk_disp_333
+
+Example 1: An example of a clock controller node is listed below.
+
+	clock_mfc: clock-controller@11090000 {
+		compatible = "samsung,exynos5260-clock-mfc";
+		clock = <&fin_pll>, <&clock_top TOP_DOUT_ACLK_MFC_333>;
+		clock-names = "fin_pll", "dout_aclk_mfc_333";
+		reg = <0x11090000 0x10000>;
+		#clock-cells = <1>;
+	};
+
+Example 2: UART controller node that consumes the clock generated by the
+		peri clock controller. Refer to the standard clock bindings for
+		information about 'clocks' and 'clock-names' property.
+
+	serial@12c00000 {
+		compatible = "samsung,exynos4210-uart";
+		reg = <0x12C00000 0x100>;
+		interrupts = <0 146 0>;
+		clocks = <&clock_peri PERI_PCLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
+		clock-names = "uart", "clk_uart_baud0";
+	};
+