diff options
Diffstat (limited to 'Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml | 144 |
1 files changed, 144 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml new file mode 100644 index 000000000..d747f4990 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/st,stm32-i2c.yaml @@ -0,0 +1,144 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/st,stm32-i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: I2C controller embedded in STMicroelectronics STM32 I2C platform + +maintainers: + - Pierre-Yves MORDRET <pierre-yves.mordret@st.com> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - st,stm32f7-i2c + - st,stm32mp15-i2c + then: + properties: + i2c-scl-rising-time-ns: + default: 25 + + i2c-scl-falling-time-ns: + default: 10 + + st,syscfg-fmp: + description: Use to set Fast Mode Plus bit within SYSCFG when + Fast Mode Plus speed is selected by slave. + Format is phandle to syscfg / register offset within + syscfg / register bitmask for FMP bit. + $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + minItems: 3 + maxItems: 3 + + - if: + properties: + compatible: + contains: + enum: + - st,stm32f4-i2c + then: + properties: + clock-frequency: + enum: [100000, 400000] + +properties: + compatible: + enum: + - st,stm32f4-i2c + - st,stm32f7-i2c + - st,stm32mp15-i2c + + reg: + maxItems: 1 + + interrupts: + items: + - description: interrupt ID for I2C event + - description: interrupt ID for I2C error + + resets: + maxItems: 1 + + clocks: + maxItems: 1 + + dmas: + items: + - description: RX DMA Channel phandle + - description: TX DMA Channel phandle + + dma-names: + items: + - const: rx + - const: tx + + clock-frequency: + description: Desired I2C bus clock frequency in Hz. If not specified, + the default 100 kHz frequency will be used. + For STM32F7, STM32H7 and STM32MP1 SoCs, if timing parameters + match, the bus clock frequency can be from 1Hz to 1MHz. + default: 100000 + minimum: 1 + maximum: 1000000 + +required: + - compatible + - reg + - interrupts + - resets + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/mfd/stm32f7-rcc.h> + #include <dt-bindings/clock/stm32fx-clock.h> + //Example 1 (with st,stm32f4-i2c compatible) + i2c@40005400 { + compatible = "st,stm32f4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40005400 0x400>; + interrupts = <31>, + <32>; + resets = <&rcc 277>; + clocks = <&rcc 0 149>; + }; + + //Example 2 (with st,stm32f7-i2c compatible) + i2c@40005800 { + compatible = "st,stm32f7-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40005800 0x400>; + interrupts = <31>, + <32>; + resets = <&rcc STM32F7_APB1_RESET(I2C1)>; + clocks = <&rcc 1 CLK_I2C1>; + }; + + //Example 3 (with st,stm32mp15-i2c compatible on stm32mp) + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + #include <dt-bindings/reset/stm32mp1-resets.h> + i2c@40013000 { + compatible = "st,stm32mp15-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40013000 0x400>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rcc I2C2_K>; + resets = <&rcc I2C2_R>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + st,syscfg-fmp = <&syscfg 0x4 0x2>; + }; +... |