diff options
Diffstat (limited to 'Documentation/devicetree/bindings/iio/pressure')
6 files changed, 208 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml new file mode 100644 index 000000000..be2be4b55 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/asc,dlhl60d.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: All Sensors DLH series low voltage digital pressure sensors + +maintainers: + - Tomislav Denis <tomislav.denis@avl.com> + +description: | + Bindings for the All Sensors DLH series pressure sensors. + + Specifications about the sensors can be found at: + https://www.allsensors.com/cad/DS-0355_Rev_B.PDF + +properties: + compatible: + enum: + - asc,dlhl60d + - asc,dlhl60g + + reg: + description: I2C device address + maxItems: 1 + + interrupts: + description: interrupt mapping for EOC(data ready) pin + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + pressure@29 { + compatible = "asc,dlhl60d"; + reg = <0x29>; + interrupt-parent = <&gpio0>; + interrupts = <10 IRQ_TYPE_EDGE_RISING>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml new file mode 100644 index 000000000..49257f925 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/bmp085.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BMP085/BMP180/BMP280/BME280 pressure iio sensors + +maintainers: + - Andreas Klinger <ak@it-klinger.de> + +description: | + Pressure, temperature and humidity iio sensors with i2c and spi interfaces + + Specifications about the sensor can be found at: + https://www.bosch-sensortec.com/bst/products/all_products/bmp180 + https://www.bosch-sensortec.com/bst/products/all_products/bmp280 + https://www.bosch-sensortec.com/bst/products/all_products/bme280 + +properties: + compatible: + enum: + - bosch,bmp085 + - bosch,bmp180 + - bosch,bmp280 + - bosch,bme280 + + reg: + maxItems: 1 + + vddd-supply: + description: + digital voltage regulator (see regulator/regulator.txt) + + vdda-supply: + description: + analog voltage regulator (see regulator/regulator.txt) + + reset-gpios: + description: + A GPIO line handling reset of the sensor. As the line is active low, + it should be marked GPIO_ACTIVE_LOW (see gpio/gpio.txt) + maxItems: 1 + + interrupts: + description: + interrupt mapping for IRQ (BMP085 only) + maxItems: 1 + +required: + - compatible + - vddd-supply + - vdda-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + pressure@77 { + compatible = "bosch,bmp085"; + reg = <0x77>; + interrupt-parent = <&gpio0>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; + vddd-supply = <&foo>; + vdda-supply = <&bar>; + }; + }; diff --git a/Documentation/devicetree/bindings/iio/pressure/hp03.txt b/Documentation/devicetree/bindings/iio/pressure/hp03.txt new file mode 100644 index 000000000..831dbee7a --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/hp03.txt @@ -0,0 +1,17 @@ +HopeRF HP03 digital pressure/temperature sensors + +Required properties: +- compatible: must be "hoperf,hp03" +- xclr-gpio: must be device tree identifier of the XCLR pin. + The XCLR pin is a reset of the ADC in the chip, + it must be pulled HI before the conversion and + readout of the value from the ADC registers and + pulled LO afterward. + +Example: + +hp03@77 { + compatible = "hoperf,hp03"; + reg = <0x77>; + xclr-gpio = <&portc 0 0x0>; +}; diff --git a/Documentation/devicetree/bindings/iio/pressure/ms5611.txt b/Documentation/devicetree/bindings/iio/pressure/ms5611.txt new file mode 100644 index 000000000..17bca866c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/ms5611.txt @@ -0,0 +1,19 @@ +MEAS ms5611 family pressure sensors + +Pressure sensors from MEAS Switzerland with SPI and I2C bus interfaces. + +Required properties: +- compatible: "meas,ms5611" or "meas,ms5607" +- reg: the I2C address or SPI chip select the device will respond to + +Optional properties: +- vdd-supply: an optional regulator that needs to be on to provide VDD + power to the sensor. + +Example: + +ms5607@77 { + compatible = "meas,ms5607"; + reg = <0x77>; + vdd-supply = <&ldo_3v3_gnss>; +}; diff --git a/Documentation/devicetree/bindings/iio/pressure/ms5637.txt b/Documentation/devicetree/bindings/iio/pressure/ms5637.txt new file mode 100644 index 000000000..1f43ffa06 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/ms5637.txt @@ -0,0 +1,17 @@ +* MS5637 - Measurement-Specialties MS5637, MS5805, MS5837 and MS8607 pressure & temperature sensor + +Required properties: + + -compatible: should be one of the following + meas,ms5637 + meas,ms5805 + meas,ms5837 + meas,ms8607-temppressure + -reg: I2C address of the sensor + +Example: + +ms5637@76 { + compatible = "meas,ms5637"; + reg = <0x76>; +}; diff --git a/Documentation/devicetree/bindings/iio/pressure/zpa2326.txt b/Documentation/devicetree/bindings/iio/pressure/zpa2326.txt new file mode 100644 index 000000000..a36ab3e0c --- /dev/null +++ b/Documentation/devicetree/bindings/iio/pressure/zpa2326.txt @@ -0,0 +1,29 @@ +Murata ZPA2326 pressure sensor + +Pressure sensor from Murata with SPI and I2C bus interfaces. + +Required properties: +- compatible: "murata,zpa2326" +- reg: the I2C address or SPI chip select the device will respond to + +Recommended properties for SPI bus usage: +- spi-max-frequency: maximum SPI bus frequency as documented in + Documentation/devicetree/bindings/spi/spi-bus.txt + +Optional properties: +- vref-supply: an optional regulator that needs to be on to provide VREF + power to the sensor +- vdd-supply: an optional regulator that needs to be on to provide VDD + power to the sensor +- interrupts: interrupt mapping for IRQ as documented in + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + +Example: + +zpa2326@5c { + compatible = "murata,zpa2326"; + reg = <0x5c>; + interrupt-parent = <&gpio>; + interrupts = <12>; + vdd-supply = <&ldo_1v8_gnss>; +}; |