diff options
Diffstat (limited to 'Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml | 235 |
1 files changed, 235 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml new file mode 100644 index 000000000..06889963d --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml @@ -0,0 +1,235 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/arm,gic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM Generic Interrupt Controller v1 and v2 + +maintainers: + - Marc Zyngier <marc.zyngier@arm.com> + +description: |+ + ARM SMP cores are often associated with a GIC, providing per processor + interrupts (PPI), shared processor interrupts (SPI) and software + generated interrupts (SGI). + + Primary GIC is attached directly to the CPU and typically has PPIs and SGIs. + Secondary GICs are cascaded into the upward interrupt controller and do not + have PPIs or SGIs. + +allOf: + - $ref: /schemas/interrupt-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - arm,arm11mp-gic + - arm,cortex-a15-gic + - arm,cortex-a7-gic + - arm,cortex-a5-gic + - arm,cortex-a9-gic + - arm,eb11mp-gic + - arm,gic-400 + - arm,pl390 + - arm,tc11mp-gic + - nvidia,tegra210-agic + - qcom,msm-8660-qgic + - qcom,msm-qgic2 + + - items: + - const: arm,gic-400 + - enum: + - arm,cortex-a15-gic + - arm,cortex-a7-gic + + - items: + - const: arm,arm1176jzf-devchip-gic + - const: arm,arm11mp-gic + + - items: + - const: brcm,brahma-b15-gic + - const: arm,cortex-a15-gic + + interrupt-controller: true + + "#address-cells": + enum: [ 0, 1 ] + "#size-cells": + const: 1 + + "#interrupt-cells": + const: 3 + description: | + The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI + interrupts. + + The 2nd cell contains the interrupt number for the interrupt type. + SPI interrupts are in the range [0-987]. PPI interrupts are in the + range [0-15]. + + The 3rd cell is the flags, encoded as follows: + bits[3:0] trigger type and level flags. + 1 = low-to-high edge triggered + 2 = high-to-low edge triggered (invalid for SPIs) + 4 = active high level-sensitive + 8 = active low level-sensitive (invalid for SPIs). + bits[15:8] PPI interrupt cpu mask. Each bit corresponds to each of + the 8 possible cpus attached to the GIC. A bit set to '1' indicated + the interrupt is wired to that CPU. Only valid for PPI interrupts. + Also note that the configurability of PPI interrupts is IMPLEMENTATION + DEFINED and as such not guaranteed to be present (most SoC available + in 2014 seem to ignore the setting of this flag and use the hardware + default value). + + reg: + description: | + Specifies base physical address(s) and size of the GIC registers. The + first region is the GIC distributor register base and size. The 2nd region + is the GIC cpu interface register base and size. + + For GICv2 with virtualization extensions, additional regions are + required for specifying the base physical address and size of the VGIC + registers. The first additional region is the GIC virtual interface + control register base and size. The 2nd additional region is the GIC + virtual cpu interface register base and size. + minItems: 2 + maxItems: 4 + + ranges: true + + interrupts: + description: Interrupt source of the parent interrupt controller on + secondary GICs, or VGIC maintenance interrupt on primary GIC (see + below). + maxItems: 1 + + cpu-offset: + description: per-cpu offset within the distributor and cpu interface + regions, used when the GIC doesn't have banked registers. The offset + is cpu-offset * cpu-nr. + $ref: /schemas/types.yaml#/definitions/uint32 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + description: List of names for the GIC clock input(s). Valid clock names + depend on the GIC variant. + oneOf: + - const: ic_clk # for "arm,arm11mp-gic" + - const: PERIPHCLKEN # for "arm,cortex-a15-gic" + - items: # for "arm,cortex-a9-gic" + - const: PERIPHCLK + - const: PERIPHCLKEN + - const: clk # for "arm,gic-400" and "nvidia,tegra210" + - const: gclk #for "arm,pl390" + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + +patternProperties: + "^v2m@[0-9a-f]+$": + type: object + description: | + * GICv2m extension for MSI/MSI-x support (Optional) + + Certain revisions of GIC-400 supports MSI/MSI-x via V2M register frame(s). + This is enabled by specifying v2m sub-node(s). + + properties: + compatible: + const: arm,gic-v2m-frame + + msi-controller: true + + reg: + maxItems: 1 + description: GICv2m MSI interface register base and size + + arm,msi-base-spi: + description: When the MSI_TYPER register contains an incorrect value, + this property should contain the SPI base of the MSI frame, overriding + the HW value. + $ref: /schemas/types.yaml#/definitions/uint32 + + arm,msi-num-spis: + description: When the MSI_TYPER register contains an incorrect value, + this property should contain the number of SPIs assigned to the + frame, overriding the HW value. + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - compatible + - msi-controller + - reg + + additionalProperties: false + +additionalProperties: false + +examples: + - | + // GICv1 + intc: interrupt-controller@fff11000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0xfff11000 0x1000>, + <0xfff10100 0x100>; + }; + + - | + // GICv2 + interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x2c001000 0x1000>, + <0x2c002000 0x2000>, + <0x2c004000 0x2000>, + <0x2c006000 0x2000>; + interrupts = <1 9 0xf04>; + }; + + - | + // GICv2m extension for MSI/MSI-x support + interrupt-controller@e1101000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + interrupts = <1 8 0xf04>; + ranges = <0 0xe1100000 0x100000>; + reg = <0xe1110000 0x01000>, + <0xe112f000 0x02000>, + <0xe1140000 0x10000>, + <0xe1160000 0x10000>; + + v2m0: v2m@80000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x80000 0x1000>; + }; + + //... + + v2mN: v2m@90000 { + compatible = "arm,gic-v2m-frame"; + msi-controller; + reg = <0x90000 0x1000>; + }; + }; +... |