diff options
Diffstat (limited to 'Documentation/devicetree/bindings/leds/leds-lp55xx.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/leds/leds-lp55xx.yaml | 228 |
1 files changed, 228 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml new file mode 100644 index 000000000..58e974793 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml @@ -0,0 +1,228 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-lp55xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI/National Semiconductor LP55xx and LP8501 LED Drivers + +maintainers: + - Jacek Anaszewski <jacek.anaszewski@gmail.com> + - Pavel Machek <pavel@ucw.cz> + +description: | + Bindings for the TI/National Semiconductor LP55xx and LP8501 multi channel + LED Drivers. + + For more product information please see the link below: + https://www.ti.com/lit/gpn/lp5521 + https://www.ti.com/lit/gpn/lp5523 + https://www.ti.com/lit/gpn/lp55231 + https://www.ti.com/lit/gpn/lp5562 + https://www.ti.com/lit/gpn/lp8501 + +properties: + compatible: + enum: + - national,lp5521 + - national,lp5523 + - ti,lp55231 + - ti,lp5562 + - ti,lp8501 + + reg: + maxItems: 1 + description: I2C slave address + + clock-mode: + $ref: /schemas/types.yaml#definitions/uint8 + description: | + Input clock mode + enum: + - 0 # automode + - 1 # internal + - 2 # external + + enable-gpio: + maxItems: 1 + description: | + GPIO attached to the chip's enable pin + + pwr-sel: + $ref: /schemas/types.yaml#definitions/uint8 + description: | + LP8501 specific property. Power selection for output channels. + enum: + - 0 # D1~9 are connected to VDD + - 1 # D1~6 with VDD, D7~9 with VOUT + - 2 # D1~6 with VOUT, D7~9 with VDD + - 3 # D1~9 are connected to VOUT + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "(^led@[0-9a-f]$|led)": + type: object + $ref: common.yaml# + properties: + led-cur: + $ref: /schemas/types.yaml#definitions/uint8 + description: | + Current setting at each LED channel (mA x10, 0 if LED is not connected) + minimum: 0 + maximum: 255 + + max-cur: + $ref: /schemas/types.yaml#definitions/uint8 + description: Maximun current at each LED channel. + + reg: + description: | + Output channel for the LED. This is zero based channel identifier and + the data sheet is a one based channel identifier. + reg value to output to LED output number + enum: + - 0 # LED output D1 + - 1 # LED output D2 + - 2 # LED output D3 + - 3 # LED output D4 + - 4 # LED output D5 + - 5 # LED output D6 + - 6 # LED output D7 + - 7 # LED output D8 + - 8 # LED output D9 + + chan-name: + $ref: /schemas/types.yaml#definitions/string + description: name of channel + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/common.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@32 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "ti,lp8501"; + reg = <0x32>; + clock-mode = /bits/ 8 <2>; + pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */ + + led@0 { + reg = <0>; + chan-name = "d1"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + led@1 { + reg = <1>; + chan-name = "d2"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + led@2 { + reg = <2>; + chan-name = "d3"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + led@3 { + reg = <3>; + chan-name = "d4"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + led@4 { + reg = <4>; + chan-name = "d5"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + led@5 { + reg = <5>; + chan-name = "d6"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + led@6 { + reg = <6>; + chan-name = "d7"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + led@7 { + reg = <7>; + chan-name = "d8"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + + led@8 { + reg = <8>; + chan-name = "d9"; + led-cur = /bits/ 8 <0x14>; + max-cur = /bits/ 8 <0x20>; + }; + }; + + led-controller@33 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "national,lp5523"; + reg = <0x33>; + clock-mode = /bits/ 8 <0>; + + multi-led@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + color = <LED_COLOR_ID_RGB>; + function = LED_FUNCTION_STANDBY; + linux,default-trigger = "heartbeat"; + + led@0 { + led-cur = /bits/ 8 <50>; + max-cur = /bits/ 8 <100>; + reg = <0x0>; + color = <LED_COLOR_ID_GREEN>; + }; + + led@1 { + led-cur = /bits/ 8 <50>; + max-cur = /bits/ 8 <100>; + reg = <0x1>; + color = <LED_COLOR_ID_BLUE>; + }; + + led@6 { + led-cur = /bits/ 8 <50>; + max-cur = /bits/ 8 <100>; + reg = <0x6>; + color = <LED_COLOR_ID_RED>; + }; + }; + }; + }; + +... |