1 files changed, 65 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
new file mode 100644
index 000000000..6217e6430
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
@@ -0,0 +1,65 @@
+Texas Instruments TI-SCI Generic Power Domain
+---------------------------------------------
+
+Some TI SoCs contain a system controller (like the PMMC, etc...) that is
+responsible for controlling the state of the IPs that are present.
+Communication between the host processor running an OS and the system
+controller happens through a protocol known as TI-SCI [1].
+
+[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
+
+PM Domain Node
+==============
+The PM domain node represents the global PM domain managed by the PMMC, which
+in this case is the implementation as documented by the generic PM domain
+bindings in Documentation/devicetree/bindings/power/power-domain.yaml.  Because
+this relies on the TI SCI protocol to communicate with the PMMC it must be a
+child of the pmmc node.
+
+Required Properties:
+--------------------
+- compatible: should be "ti,sci-pm-domain"
+- #power-domain-cells: Can be one of the following:
+			1: Containing the device id of each node
+			2: First entry should be device id
+			   Second entry should be one of the floowing:
+			   TI_SCI_PD_EXCLUSIVE: To allow device to be
+						exclusively controlled by
+						the requesting hosts.
+			   TI_SCI_PD_SHARED: To allow device to be shared
+					     by multiple hosts.
+
+Example (K2G):
+-------------
+	pmmc: pmmc {
+		compatible = "ti,k2g-sci";
+		...
+
+		k2g_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <1>;
+		};
+	};
+
+PM Domain Consumers
+===================
+Hardware blocks belonging to a PM domain should contain a "power-domains"
+property that is a phandle pointing to the corresponding PM domain node
+along with an index representing the device id to be passed to the PMMC
+for device control.
+
+Required Properties:
+--------------------
+- power-domains: phandle pointing to the corresponding PM domain node
+		 and an ID representing the device.
+
+See http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data for the list
+of valid identifiers for k2g.
+
+Example (K2G):
+--------------------
+	uart0: serial@2530c00 {
+		compatible = "ns16550a";
+		...
+		power-domains = <&k2g_pds 0x002c>;
+	};