1 files changed, 85 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
new file mode 100644
index 000000000..983c4e54c
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/st,stm32-qspi.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/st,stm32-qspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Quad Serial Peripheral Interface (QSPI) bindings
+
+maintainers:
+  - Christophe Kerello <christophe.kerello@st.com>
+  - Patrice Chotard <patrice.chotard@st.com>
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+properties:
+  compatible:
+    const: st,stm32f469-qspi
+
+  reg:
+    items:
+      - description: registers
+      - description: memory mapping
+
+  reg-names:
+    items:
+      - const: qspi
+      - const: qspi_mm
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: tx DMA channel
+      - description: rx DMA channel
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    spi@58003000 {
+      compatible = "st,stm32f469-qspi";
+      reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+      reg-names = "qspi", "qspi_mm";
+      interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+      dmas = <&mdma1 22 0x10 0x100002 0x0 0x0>,
+             <&mdma1 22 0x10 0x100008 0x0 0x0>;
+      dma-names = "tx", "rx";
+      clocks = <&rcc QSPI_K>;
+      resets = <&rcc QSPI_R>;
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      flash@0 {
+        compatible = "jedec,spi-nor";
+        reg = <0>;
+        spi-rx-bus-width = <4>;
+        spi-max-frequency = <108000000>;
+      };
+    };
+
+...