diff options
Diffstat (limited to 'Documentation/devicetree/bindings/ufs/ufs-mediatek.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/ufs/ufs-mediatek.txt | 45 |
1 files changed, 45 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt b/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt new file mode 100644 index 000000000..63a953b67 --- /dev/null +++ b/Documentation/devicetree/bindings/ufs/ufs-mediatek.txt @@ -0,0 +1,45 @@ +* Mediatek Universal Flash Storage (UFS) Host Controller + +UFS nodes are defined to describe on-chip UFS hardware macro. +Each UFS Host Controller should have its own node. + +To bind UFS PHY with UFS host controller, the controller node should +contain a phandle reference to UFS M-PHY node. + +Required properties for UFS nodes: +- compatible : Compatible list, contains the following controller: + "mediatek,mt8183-ufshci" for MediaTek UFS host controller + present on MT8183 chipsets. + "mediatek,mt8192-ufshci" for MediaTek UFS host controller + present on MT8192 chipsets. +- reg : Address and length of the UFS register set. +- phys : phandle to m-phy. +- clocks : List of phandle and clock specifier pairs. +- clock-names : List of clock input name strings sorted in the same + order as the clocks property. "ufs" is mandatory. + "ufs": ufshci core control clock. +- freq-table-hz : Array of <min max> operating frequencies stored in the same + order as the clocks property. If this property is not + defined or a value in the array is "0" then it is assumed + that the frequency is set by the parent clock or a + fixed rate clock source. +- vcc-supply : phandle to VCC supply regulator node. + +Example: + + ufsphy: phy@11fa0000 { + ... + }; + + ufshci@11270000 { + compatible = "mediatek,mt8183-ufshci"; + reg = <0 0x11270000 0 0x2300>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>; + phys = <&ufsphy>; + + clocks = <&infracfg_ao INFRACFG_AO_UFS_CG>; + clock-names = "ufs"; + freq-table-hz = <0 0>; + + vcc-supply = <&mt_pmic_vemc_ldo_reg>; + }; |