diff options
Diffstat (limited to 'Documentation/filesystems')
122 files changed, 37195 insertions, 0 deletions
diff --git a/Documentation/filesystems/9p.rst b/Documentation/filesystems/9p.rst new file mode 100644 index 000000000..7b5964bc8 --- /dev/null +++ b/Documentation/filesystems/9p.rst @@ -0,0 +1,195 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================================= +v9fs: Plan 9 Resource Sharing for Linux +======================================= + +About +===== + +v9fs is a Unix implementation of the Plan 9 9p remote filesystem protocol. + +This software was originally developed by Ron Minnich <rminnich@sandia.gov> +and Maya Gokhale. Additional development by Greg Watson +<gwatson@lanl.gov> and most recently Eric Van Hensbergen +<ericvh@gmail.com>, Latchesar Ionkov <lucho@ionkov.net> and Russ Cox +<rsc@swtch.com>. + +The best detailed explanation of the Linux implementation and applications of +the 9p client is available in the form of a USENIX paper: + + https://www.usenix.org/events/usenix05/tech/freenix/hensbergen.html + +Other applications are described in the following papers: + + * XCPU & Clustering + http://xcpu.org/papers/xcpu-talk.pdf + * KVMFS: control file system for KVM + http://xcpu.org/papers/kvmfs.pdf + * CellFS: A New Programming Model for the Cell BE + http://xcpu.org/papers/cellfs-talk.pdf + * PROSE I/O: Using 9p to enable Application Partitions + http://plan9.escet.urjc.es/iwp9/cready/PROSE_iwp9_2006.pdf + * VirtFS: A Virtualization Aware File System pass-through + http://goo.gl/3WPDg + +Usage +===== + +For remote file server:: + + mount -t 9p 10.10.1.2 /mnt/9 + +For Plan 9 From User Space applications (http://swtch.com/plan9):: + + mount -t 9p `namespace`/acme /mnt/9 -o trans=unix,uname=$USER + +For server running on QEMU host with virtio transport:: + + mount -t 9p -o trans=virtio <mount_tag> /mnt/9 + +where mount_tag is the tag associated by the server to each of the exported +mount points. Each 9P export is seen by the client as a virtio device with an +associated "mount_tag" property. Available mount tags can be +seen by reading /sys/bus/virtio/drivers/9pnet_virtio/virtio<n>/mount_tag files. + +Options +======= + + ============= =============================================================== + trans=name select an alternative transport. Valid options are + currently: + + ======== ============================================ + unix specifying a named pipe mount point + tcp specifying a normal TCP/IP connection + fd used passed file descriptors for connection + (see rfdno and wfdno) + virtio connect to the next virtio channel available + (from QEMU with trans_virtio module) + rdma connect to a specified RDMA channel + ======== ============================================ + + uname=name user name to attempt mount as on the remote server. The + server may override or ignore this value. Certain user + names may require authentication. + + aname=name aname specifies the file tree to access when the server is + offering several exported file systems. + + cache=mode specifies a caching policy. By default, no caches are used. + + none + default no cache policy, metadata and data + alike are synchronous. + loose + no attempts are made at consistency, + intended for exclusive, read-only mounts + fscache + use FS-Cache for a persistent, read-only + cache backend. + mmap + minimal cache that is only used for read-write + mmap. Northing else is cached, like cache=none + + debug=n specifies debug level. The debug level is a bitmask. + + ===== ================================ + 0x01 display verbose error messages + 0x02 developer debug (DEBUG_CURRENT) + 0x04 display 9p trace + 0x08 display VFS trace + 0x10 display Marshalling debug + 0x20 display RPC debug + 0x40 display transport debug + 0x80 display allocation debug + 0x100 display protocol message debug + 0x200 display Fid debug + 0x400 display packet debug + 0x800 display fscache tracing debug + ===== ================================ + + rfdno=n the file descriptor for reading with trans=fd + + wfdno=n the file descriptor for writing with trans=fd + + msize=n the number of bytes to use for 9p packet payload + + port=n port to connect to on the remote server + + noextend force legacy mode (no 9p2000.u or 9p2000.L semantics) + + version=name Select 9P protocol version. Valid options are: + + ======== ============================== + 9p2000 Legacy mode (same as noextend) + 9p2000.u Use 9P2000.u protocol + 9p2000.L Use 9P2000.L protocol + ======== ============================== + + dfltuid attempt to mount as a particular uid + + dfltgid attempt to mount with a particular gid + + afid security channel - used by Plan 9 authentication protocols + + nodevmap do not map special files - represent them as normal files. + This can be used to share devices/named pipes/sockets between + hosts. This functionality will be expanded in later versions. + + access there are four access modes. + user + if a user tries to access a file on v9fs + filesystem for the first time, v9fs sends an + attach command (Tattach) for that user. + This is the default mode. + <uid> + allows only user with uid=<uid> to access + the files on the mounted filesystem + any + v9fs does single attach and performs all + operations as one user + clien + ACL based access check on the 9p client + side for access validation + + cachetag cache tag to use the specified persistent cache. + cache tags for existing cache sessions can be listed at + /sys/fs/9p/caches. (applies only to cache=fscache) + ============= =============================================================== + +Behavior +======== + +This section aims at describing 9p 'quirks' that can be different +from a local filesystem behaviors. + + - Setting O_NONBLOCK on a file will make client reads return as early + as the server returns some data instead of trying to fill the read + buffer with the requested amount of bytes or end of file is reached. + +Resources +========= + +Protocol specifications are maintained on github: +http://ericvh.github.com/9p-rfc/ + +9p client and server implementations are listed on +http://9p.cat-v.org/implementations + +A 9p2000.L server is being developed by LLNL and can be found +at http://code.google.com/p/diod/ + +There are user and developer mailing lists available through the v9fs project +on sourceforge (http://sourceforge.net/projects/v9fs). + +News and other information is maintained on a Wiki. +(http://sf.net/apps/mediawiki/v9fs/index.php). + +Bug reports are best issued via the mailing list. + +For more information on the Plan 9 Operating System check out +http://plan9.bell-labs.com/plan9 + +For information on Plan 9 from User Space (Plan 9 applications and libraries +ported to Linux/BSD/OSX/etc) check out https://9fans.github.io/plan9port/ diff --git a/Documentation/filesystems/adfs.rst b/Documentation/filesystems/adfs.rst new file mode 100644 index 000000000..5b22cae38 --- /dev/null +++ b/Documentation/filesystems/adfs.rst @@ -0,0 +1,108 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============================== +Acorn Disc Filing System - ADFS +=============================== + +Filesystems supported by ADFS +----------------------------- + +The ADFS module supports the following Filecore formats which have: + +- new maps +- new directories or big directories + +In terms of the named formats, this means we support: + +- E and E+, with or without boot block +- F and F+ + +We fully support reading files from these filesystems, and writing to +existing files within their existing allocation. Essentially, we do +not support changing any of the filesystem metadata. + +This is intended to support loopback mounted Linux native filesystems +on a RISC OS Filecore filesystem, but will allow the data within files +to be changed. + +If write support (ADFS_FS_RW) is configured, we allow rudimentary +directory updates, specifically updating the access mode and timestamp. + +Mount options for ADFS +---------------------- + + ============ ====================================================== + uid=nnn All files in the partition will be owned by + user id nnn. Default 0 (root). + gid=nnn All files in the partition will be in group + nnn. Default 0 (root). + ownmask=nnn The permission mask for ADFS 'owner' permissions + will be nnn. Default 0700. + othmask=nnn The permission mask for ADFS 'other' permissions + will be nnn. Default 0077. + ftsuffix=n When ftsuffix=0, no file type suffix will be applied. + When ftsuffix=1, a hexadecimal suffix corresponding to + the RISC OS file type will be added. Default 0. + ============ ====================================================== + +Mapping of ADFS permissions to Linux permissions +------------------------------------------------ + + ADFS permissions consist of the following: + + - Owner read + - Owner write + - Other read + - Other write + + (In older versions, an 'execute' permission did exist, but this + does not hold the same meaning as the Linux 'execute' permission + and is now obsolete). + + The mapping is performed as follows:: + + Owner read -> -r--r--r-- + Owner write -> --w--w---w + Owner read and filetype UnixExec -> ---x--x--x + These are then masked by ownmask, eg 700 -> -rwx------ + Possible owner mode permissions -> -rwx------ + + Other read -> -r--r--r-- + Other write -> --w--w--w- + Other read and filetype UnixExec -> ---x--x--x + These are then masked by othmask, eg 077 -> ----rwxrwx + Possible other mode permissions -> ----rwxrwx + + Hence, with the default masks, if a file is owner read/write, and + not a UnixExec filetype, then the permissions will be:: + + -rw------- + + However, if the masks were ownmask=0770,othmask=0007, then this would + be modified to:: + + -rw-rw---- + + There is no restriction on what you can do with these masks. You may + wish that either read bits give read access to the file for all, but + keep the default write protection (ownmask=0755,othmask=0577):: + + -rw-r--r-- + + You can therefore tailor the permission translation to whatever you + desire the permissions should be under Linux. + +RISC OS file type suffix +------------------------ + + RISC OS file types are stored in bits 19..8 of the file load address. + + To enable non-RISC OS systems to be used to store files without losing + file type information, a file naming convention was devised (initially + for use with NFS) such that a hexadecimal suffix of the form ,xyz + denoted the file type: e.g. BasicFile,ffb is a BASIC (0xffb) file. This + naming convention is now also used by RISC OS emulators such as RPCEmu. + + Mounting an ADFS disc with option ftsuffix=1 will cause appropriate file + type suffixes to be appended to file names read from a directory. If the + ftsuffix option is zero or omitted, no file type suffixes will be added. diff --git a/Documentation/filesystems/affs.rst b/Documentation/filesystems/affs.rst new file mode 100644 index 000000000..5776cbd5f --- /dev/null +++ b/Documentation/filesystems/affs.rst @@ -0,0 +1,250 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================= +Overview of Amiga Filesystems +============================= + +Not all varieties of the Amiga filesystems are supported for reading and +writing. The Amiga currently knows six different filesystems: + +============== =============================================================== +DOS\0 The old or original filesystem, not really suited for + hard disks and normally not used on them, either. + Supported read/write. + +DOS\1 The original Fast File System. Supported read/write. + +DOS\2 The old "international" filesystem. International means that + a bug has been fixed so that accented ("international") letters + in file names are case-insensitive, as they ought to be. + Supported read/write. + +DOS\3 The "international" Fast File System. Supported read/write. + +DOS\4 The original filesystem with directory cache. The directory + cache speeds up directory accesses on floppies considerably, + but slows down file creation/deletion. Doesn't make much + sense on hard disks. Supported read only. + +DOS\5 The Fast File System with directory cache. Supported read only. +============== =============================================================== + +All of the above filesystems allow block sizes from 512 to 32K bytes. +Supported block sizes are: 512, 1024, 2048 and 4096 bytes. Larger blocks +speed up almost everything at the expense of wasted disk space. The speed +gain above 4K seems not really worth the price, so you don't lose too +much here, either. + +The muFS (multi user File System) equivalents of the above file systems +are supported, too. + +Mount options for the AFFS +========================== + +protect + If this option is set, the protection bits cannot be altered. + +setuid[=uid] + This sets the owner of all files and directories in the file + system to uid or the uid of the current user, respectively. + +setgid[=gid] + Same as above, but for gid. + +mode=mode + Sets the mode flags to the given (octal) value, regardless + of the original permissions. Directories will get an x + permission if the corresponding r bit is set. + This is useful since most of the plain AmigaOS files + will map to 600. + +nofilenametruncate + The file system will return an error when filename exceeds + standard maximum filename length (30 characters). + +reserved=num + Sets the number of reserved blocks at the start of the + partition to num. You should never need this option. + Default is 2. + +root=block + Sets the block number of the root block. This should never + be necessary. + +bs=blksize + Sets the blocksize to blksize. Valid block sizes are 512, + 1024, 2048 and 4096. Like the root option, this should + never be necessary, as the affs can figure it out itself. + +quiet + The file system will not return an error for disallowed + mode changes. + +verbose + The volume name, file system type and block size will + be written to the syslog when the filesystem is mounted. + +mufs + The filesystem is really a muFS, also it doesn't + identify itself as one. This option is necessary if + the filesystem wasn't formatted as muFS, but is used + as one. + +prefix=path + Path will be prefixed to every absolute path name of + symbolic links on an AFFS partition. Default = "/". + (See below.) + +volume=name + When symbolic links with an absolute path are created + on an AFFS partition, name will be prepended as the + volume name. Default = "" (empty string). + (See below.) + +Handling of the Users/Groups and protection flags +================================================= + +Amiga -> Linux: + +The Amiga protection flags RWEDRWEDHSPARWED are handled as follows: + + - R maps to r for user, group and others. On directories, R implies x. + + - W maps to w. + + - E maps to x. + + - D is ignored. + + - H, S and P are always retained and ignored under Linux. + + - A is cleared when a file is written to. + +User id and group id will be used unless set[gu]id are given as mount +options. Since most of the Amiga file systems are single user systems +they will be owned by root. The root directory (the mount point) of the +Amiga filesystem will be owned by the user who actually mounts the +filesystem (the root directory doesn't have uid/gid fields). + +Linux -> Amiga: + +The Linux rwxrwxrwx file mode is handled as follows: + + - r permission will allow R for user, group and others. + + - w permission will allow W for user, group and others. + + - x permission of the user will allow E for plain files. + + - D will be allowed for user, group and others. + + - All other flags (suid, sgid, ...) are ignored and will + not be retained. + +Newly created files and directories will get the user and group ID +of the current user and a mode according to the umask. + +Symbolic links +============== + +Although the Amiga and Linux file systems resemble each other, there +are some, not always subtle, differences. One of them becomes apparent +with symbolic links. While Linux has a file system with exactly one +root directory, the Amiga has a separate root directory for each +file system (for example, partition, floppy disk, ...). With the Amiga, +these entities are called "volumes". They have symbolic names which +can be used to access them. Thus, symbolic links can point to a +different volume. AFFS turns the volume name into a directory name +and prepends the prefix path (see prefix option) to it. + +Example: +You mount all your Amiga partitions under /amiga/<volume> (where +<volume> is the name of the volume), and you give the option +"prefix=/amiga/" when mounting all your AFFS partitions. (They +might be "User", "WB" and "Graphics", the mount points /amiga/User, +/amiga/WB and /amiga/Graphics). A symbolic link referring to +"User:sc/include/dos/dos.h" will be followed to +"/amiga/User/sc/include/dos/dos.h". + +Examples +======== + +Command line:: + + mount Archive/Amiga/Workbench3.1.adf /mnt -t affs -o loop,verbose + mount /dev/sda3 /Amiga -t affs + +/etc/fstab entry:: + + /dev/sdb5 /amiga/Workbench affs noauto,user,exec,verbose 0 0 + +IMPORTANT NOTE +============== + +If you boot Windows 95 (don't know about 3.x, 98 and NT) while you +have an Amiga harddisk connected to your PC, it will overwrite +the bytes 0x00dc..0x00df of block 0 with garbage, thus invalidating +the Rigid Disk Block. Sheer luck has it that this is an unused +area of the RDB, so only the checksum doesn't match anymore. +Linux will ignore this garbage and recognize the RDB anyway, but +before you connect that drive to your Amiga again, you must +restore or repair your RDB. So please do make a backup copy of it +before booting Windows! + +If the damage is already done, the following should fix the RDB +(where <disk> is the device name). + +DO AT YOUR OWN RISK:: + + dd if=/dev/<disk> of=rdb.tmp count=1 + cp rdb.tmp rdb.fixed + dd if=/dev/zero of=rdb.fixed bs=1 seek=220 count=4 + dd if=rdb.fixed of=/dev/<disk> + +Bugs, Restrictions, Caveats +=========================== + +Quite a few things may not work as advertised. Not everything is +tested, though several hundred MB have been read and written using +this fs. For a most up-to-date list of bugs please consult +fs/affs/Changes. + +By default, filenames are truncated to 30 characters without warning. +'nofilenametruncate' mount option can change that behavior. + +Case is ignored by the affs in filename matching, but Linux shells +do care about the case. Example (with /wb being an affs mounted fs):: + + rm /wb/WRONGCASE + +will remove /mnt/wrongcase, but:: + + rm /wb/WR* + +will not since the names are matched by the shell. + +The block allocation is designed for hard disk partitions. If more +than 1 process writes to a (small) diskette, the blocks are allocated +in an ugly way (but the real AFFS doesn't do much better). This +is also true when space gets tight. + +You cannot execute programs on an OFS (Old File System), since the +program files cannot be memory mapped due to the 488 byte blocks. +For the same reason you cannot mount an image on such a filesystem +via the loopback device. + +The bitmap valid flag in the root block may not be accurate when the +system crashes while an affs partition is mounted. There's currently +no way to fix a garbled filesystem without an Amiga (disk validator) +or manually (who would do this?). Maybe later. + +If you mount affs partitions on system startup, you may want to tell +fsck that the fs should not be checked (place a '0' in the sixth field +of /etc/fstab). + +It's not possible to read floppy disks with a normal PC or workstation +due to an incompatibility with the Amiga floppy controller. + +If you are interested in an Amiga Emulator for Linux, look at + +http://web.archive.org/web/%2E/http://www.freiburg.linux.de/~uae/ diff --git a/Documentation/filesystems/afs.rst b/Documentation/filesystems/afs.rst new file mode 100644 index 000000000..0abb155ac --- /dev/null +++ b/Documentation/filesystems/afs.rst @@ -0,0 +1,251 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================== +kAFS: AFS FILESYSTEM +==================== + +.. Contents: + + - Overview. + - Usage. + - Mountpoints. + - Dynamic root. + - Proc filesystem. + - The cell database. + - Security. + - The @sys substitution. + + +Overview +======== + +This filesystem provides a fairly simple secure AFS filesystem driver. It is +under development and does not yet provide the full feature set. The features +it does support include: + + (*) Security (currently only AFS kaserver and KerberosIV tickets). + + (*) File reading and writing. + + (*) Automounting. + + (*) Local caching (via fscache). + +It does not yet support the following AFS features: + + (*) pioctl() system call. + + +Compilation +=========== + +The filesystem should be enabled by turning on the kernel configuration +options:: + + CONFIG_AF_RXRPC - The RxRPC protocol transport + CONFIG_RXKAD - The RxRPC Kerberos security handler + CONFIG_AFS - The AFS filesystem + +Additionally, the following can be turned on to aid debugging:: + + CONFIG_AF_RXRPC_DEBUG - Permit AF_RXRPC debugging to be enabled + CONFIG_AFS_DEBUG - Permit AFS debugging to be enabled + +They permit the debugging messages to be turned on dynamically by manipulating +the masks in the following files:: + + /sys/module/af_rxrpc/parameters/debug + /sys/module/kafs/parameters/debug + + +Usage +===== + +When inserting the driver modules the root cell must be specified along with a +list of volume location server IP addresses:: + + modprobe rxrpc + modprobe kafs rootcell=cambridge.redhat.com:172.16.18.73:172.16.18.91 + +The first module is the AF_RXRPC network protocol driver. This provides the +RxRPC remote operation protocol and may also be accessed from userspace. See: + + Documentation/networking/rxrpc.rst + +The second module is the kerberos RxRPC security driver, and the third module +is the actual filesystem driver for the AFS filesystem. + +Once the module has been loaded, more modules can be added by the following +procedure:: + + echo add grand.central.org 18.9.48.14:128.2.203.61:130.237.48.87 >/proc/fs/afs/cells + +Where the parameters to the "add" command are the name of a cell and a list of +volume location servers within that cell, with the latter separated by colons. + +Filesystems can be mounted anywhere by commands similar to the following:: + + mount -t afs "%cambridge.redhat.com:root.afs." /afs + mount -t afs "#cambridge.redhat.com:root.cell." /afs/cambridge + mount -t afs "#root.afs." /afs + mount -t afs "#root.cell." /afs/cambridge + +Where the initial character is either a hash or a percent symbol depending on +whether you definitely want a R/W volume (percent) or whether you'd prefer a +R/O volume, but are willing to use a R/W volume instead (hash). + +The name of the volume can be suffixes with ".backup" or ".readonly" to +specify connection to only volumes of those types. + +The name of the cell is optional, and if not given during a mount, then the +named volume will be looked up in the cell specified during modprobe. + +Additional cells can be added through /proc (see later section). + + +Mountpoints +=========== + +AFS has a concept of mountpoints. In AFS terms, these are specially formatted +symbolic links (of the same form as the "device name" passed to mount). kAFS +presents these to the user as directories that have a follow-link capability +(ie: symbolic link semantics). If anyone attempts to access them, they will +automatically cause the target volume to be mounted (if possible) on that site. + +Automatically mounted filesystems will be automatically unmounted approximately +twenty minutes after they were last used. Alternatively they can be unmounted +directly with the umount() system call. + +Manually unmounting an AFS volume will cause any idle submounts upon it to be +culled first. If all are culled, then the requested volume will also be +unmounted, otherwise error EBUSY will be returned. + +This can be used by the administrator to attempt to unmount the whole AFS tree +mounted on /afs in one go by doing:: + + umount /afs + + +Dynamic Root +============ + +A mount option is available to create a serverless mount that is only usable +for dynamic lookup. Creating such a mount can be done by, for example:: + + mount -t afs none /afs -o dyn + +This creates a mount that just has an empty directory at the root. Attempting +to look up a name in this directory will cause a mountpoint to be created that +looks up a cell of the same name, for example:: + + ls /afs/grand.central.org/ + + +Proc Filesystem +=============== + +The AFS modules creates a "/proc/fs/afs/" directory and populates it: + + (*) A "cells" file that lists cells currently known to the afs module and + their usage counts:: + + [root@andromeda ~]# cat /proc/fs/afs/cells + USE NAME + 3 cambridge.redhat.com + + (*) A directory per cell that contains files that list volume location + servers, volumes, and active servers known within that cell:: + + [root@andromeda ~]# cat /proc/fs/afs/cambridge.redhat.com/servers + USE ADDR STATE + 4 172.16.18.91 0 + [root@andromeda ~]# cat /proc/fs/afs/cambridge.redhat.com/vlservers + ADDRESS + 172.16.18.91 + [root@andromeda ~]# cat /proc/fs/afs/cambridge.redhat.com/volumes + USE STT VLID[0] VLID[1] VLID[2] NAME + 1 Val 20000000 20000001 20000002 root.afs + + +The Cell Database +================= + +The filesystem maintains an internal database of all the cells it knows and the +IP addresses of the volume location servers for those cells. The cell to which +the system belongs is added to the database when modprobe is performed by the +"rootcell=" argument or, if compiled in, using a "kafs.rootcell=" argument on +the kernel command line. + +Further cells can be added by commands similar to the following:: + + echo add CELLNAME VLADDR[:VLADDR][:VLADDR]... >/proc/fs/afs/cells + echo add grand.central.org 18.9.48.14:128.2.203.61:130.237.48.87 >/proc/fs/afs/cells + +No other cell database operations are available at this time. + + +Security +======== + +Secure operations are initiated by acquiring a key using the klog program. A +very primitive klog program is available at: + + https://people.redhat.com/~dhowells/rxrpc/klog.c + +This should be compiled by:: + + make klog LDLIBS="-lcrypto -lcrypt -lkrb4 -lkeyutils" + +And then run as:: + + ./klog + +Assuming it's successful, this adds a key of type RxRPC, named for the service +and cell, eg: "afs@<cellname>". This can be viewed with the keyctl program or +by cat'ing /proc/keys:: + + [root@andromeda ~]# keyctl show + Session Keyring + -3 --alswrv 0 0 keyring: _ses.3268 + 2 --alswrv 0 0 \_ keyring: _uid.0 + 111416553 --als--v 0 0 \_ rxrpc: afs@CAMBRIDGE.REDHAT.COM + +Currently the username, realm, password and proposed ticket lifetime are +compiled in to the program. + +It is not required to acquire a key before using AFS facilities, but if one is +not acquired then all operations will be governed by the anonymous user parts +of the ACLs. + +If a key is acquired, then all AFS operations, including mounts and automounts, +made by a possessor of that key will be secured with that key. + +If a file is opened with a particular key and then the file descriptor is +passed to a process that doesn't have that key (perhaps over an AF_UNIX +socket), then the operations on the file will be made with key that was used to +open the file. + + +The @sys Substitution +===================== + +The list of up to 16 @sys substitutions for the current network namespace can +be configured by writing a list to /proc/fs/afs/sysname:: + + [root@andromeda ~]# echo foo amd64_linux_26 >/proc/fs/afs/sysname + +or cleared entirely by writing an empty list:: + + [root@andromeda ~]# echo >/proc/fs/afs/sysname + +The current list for current network namespace can be retrieved by:: + + [root@andromeda ~]# cat /proc/fs/afs/sysname + foo + amd64_linux_26 + +When @sys is being substituted for, each element of the list is tried in the +order given. + +By default, the list will contain one item that conforms to the pattern +"<arch>_linux_26", amd64 being the name for x86_64. diff --git a/Documentation/filesystems/api-summary.rst b/Documentation/filesystems/api-summary.rst new file mode 100644 index 000000000..a94f17d9b --- /dev/null +++ b/Documentation/filesystems/api-summary.rst @@ -0,0 +1,144 @@ +============================= +Linux Filesystems API summary +============================= + +This section contains API-level documentation, mostly taken from the source +code itself. + +The Linux VFS +============= + +The Filesystem types +-------------------- + +.. kernel-doc:: include/linux/fs.h + :internal: + +The Directory Cache +------------------- + +.. kernel-doc:: fs/dcache.c + :export: + +.. kernel-doc:: include/linux/dcache.h + :internal: + +Inode Handling +-------------- + +.. kernel-doc:: fs/inode.c + :export: + +.. kernel-doc:: fs/bad_inode.c + :export: + +Registration and Superblocks +---------------------------- + +.. kernel-doc:: fs/super.c + :export: + +File Locks +---------- + +.. kernel-doc:: fs/locks.c + :export: + +.. kernel-doc:: fs/locks.c + :internal: + +Other Functions +--------------- + +.. kernel-doc:: fs/mpage.c + :export: + +.. kernel-doc:: fs/namei.c + :export: + +.. kernel-doc:: fs/buffer.c + :export: + +.. kernel-doc:: block/bio.c + :export: + +.. kernel-doc:: fs/seq_file.c + :export: + +.. kernel-doc:: fs/filesystems.c + :export: + +.. kernel-doc:: fs/fs-writeback.c + :export: + +.. kernel-doc:: fs/block_dev.c + :export: + +.. kernel-doc:: fs/anon_inodes.c + :export: + +.. kernel-doc:: fs/attr.c + :export: + +.. kernel-doc:: fs/d_path.c + :export: + +.. kernel-doc:: fs/dax.c + :export: + +.. kernel-doc:: fs/libfs.c + :export: + +.. kernel-doc:: fs/posix_acl.c + :export: + +.. kernel-doc:: fs/stat.c + :export: + +.. kernel-doc:: fs/sync.c + :export: + +.. kernel-doc:: fs/xattr.c + :export: + +The proc filesystem +=================== + +sysctl interface +---------------- + +.. kernel-doc:: kernel/sysctl.c + :export: + +proc filesystem interface +------------------------- + +.. kernel-doc:: fs/proc/base.c + :internal: + +Events based on file descriptors +================================ + +.. kernel-doc:: fs/eventfd.c + :export: + +The Filesystem for Exporting Kernel Objects +=========================================== + +.. kernel-doc:: fs/sysfs/file.c + :export: + +.. kernel-doc:: fs/sysfs/symlink.c + :export: + +The debugfs filesystem +====================== + +debugfs interface +----------------- + +.. kernel-doc:: fs/debugfs/inode.c + :export: + +.. kernel-doc:: fs/debugfs/file.c + :export: diff --git a/Documentation/filesystems/autofs-mount-control.rst b/Documentation/filesystems/autofs-mount-control.rst new file mode 100644 index 000000000..b5a379d25 --- /dev/null +++ b/Documentation/filesystems/autofs-mount-control.rst @@ -0,0 +1,410 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================================================================== +Miscellaneous Device control operations for the autofs kernel module +==================================================================== + +The problem +=========== + +There is a problem with active restarts in autofs (that is to say +restarting autofs when there are busy mounts). + +During normal operation autofs uses a file descriptor opened on the +directory that is being managed in order to be able to issue control +operations. Using a file descriptor gives ioctl operations access to +autofs specific information stored in the super block. The operations +are things such as setting an autofs mount catatonic, setting the +expire timeout and requesting expire checks. As is explained below, +certain types of autofs triggered mounts can end up covering an autofs +mount itself which prevents us being able to use open(2) to obtain a +file descriptor for these operations if we don't already have one open. + +Currently autofs uses "umount -l" (lazy umount) to clear active mounts +at restart. While using lazy umount works for most cases, anything that +needs to walk back up the mount tree to construct a path, such as +getcwd(2) and the proc file system /proc/<pid>/cwd, no longer works +because the point from which the path is constructed has been detached +from the mount tree. + +The actual problem with autofs is that it can't reconnect to existing +mounts. Immediately one thinks of just adding the ability to remount +autofs file systems would solve it, but alas, that can't work. This is +because autofs direct mounts and the implementation of "on demand mount +and expire" of nested mount trees have the file system mounted directly +on top of the mount trigger directory dentry. + +For example, there are two types of automount maps, direct (in the kernel +module source you will see a third type called an offset, which is just +a direct mount in disguise) and indirect. + +Here is a master map with direct and indirect map entries:: + + /- /etc/auto.direct + /test /etc/auto.indirect + +and the corresponding map files:: + + /etc/auto.direct: + + /automount/dparse/g6 budgie:/autofs/export1 + /automount/dparse/g1 shark:/autofs/export1 + and so on. + +/etc/auto.indirect:: + + g1 shark:/autofs/export1 + g6 budgie:/autofs/export1 + and so on. + +For the above indirect map an autofs file system is mounted on /test and +mounts are triggered for each sub-directory key by the inode lookup +operation. So we see a mount of shark:/autofs/export1 on /test/g1, for +example. + +The way that direct mounts are handled is by making an autofs mount on +each full path, such as /automount/dparse/g1, and using it as a mount +trigger. So when we walk on the path we mount shark:/autofs/export1 "on +top of this mount point". Since these are always directories we can +use the follow_link inode operation to trigger the mount. + +But, each entry in direct and indirect maps can have offsets (making +them multi-mount map entries). + +For example, an indirect mount map entry could also be:: + + g1 \ + / shark:/autofs/export5/testing/test \ + /s1 shark:/autofs/export/testing/test/s1 \ + /s2 shark:/autofs/export5/testing/test/s2 \ + /s1/ss1 shark:/autofs/export1 \ + /s2/ss2 shark:/autofs/export2 + +and a similarly a direct mount map entry could also be:: + + /automount/dparse/g1 \ + / shark:/autofs/export5/testing/test \ + /s1 shark:/autofs/export/testing/test/s1 \ + /s2 shark:/autofs/export5/testing/test/s2 \ + /s1/ss1 shark:/autofs/export2 \ + /s2/ss2 shark:/autofs/export2 + +One of the issues with version 4 of autofs was that, when mounting an +entry with a large number of offsets, possibly with nesting, we needed +to mount and umount all of the offsets as a single unit. Not really a +problem, except for people with a large number of offsets in map entries. +This mechanism is used for the well known "hosts" map and we have seen +cases (in 2.4) where the available number of mounts are exhausted or +where the number of privileged ports available is exhausted. + +In version 5 we mount only as we go down the tree of offsets and +similarly for expiring them which resolves the above problem. There is +somewhat more detail to the implementation but it isn't needed for the +sake of the problem explanation. The one important detail is that these +offsets are implemented using the same mechanism as the direct mounts +above and so the mount points can be covered by a mount. + +The current autofs implementation uses an ioctl file descriptor opened +on the mount point for control operations. The references held by the +descriptor are accounted for in checks made to determine if a mount is +in use and is also used to access autofs file system information held +in the mount super block. So the use of a file handle needs to be +retained. + + +The Solution +============ + +To be able to restart autofs leaving existing direct, indirect and +offset mounts in place we need to be able to obtain a file handle +for these potentially covered autofs mount points. Rather than just +implement an isolated operation it was decided to re-implement the +existing ioctl interface and add new operations to provide this +functionality. + +In addition, to be able to reconstruct a mount tree that has busy mounts, +the uid and gid of the last user that triggered the mount needs to be +available because these can be used as macro substitution variables in +autofs maps. They are recorded at mount request time and an operation +has been added to retrieve them. + +Since we're re-implementing the control interface, a couple of other +problems with the existing interface have been addressed. First, when +a mount or expire operation completes a status is returned to the +kernel by either a "send ready" or a "send fail" operation. The +"send fail" operation of the ioctl interface could only ever send +ENOENT so the re-implementation allows user space to send an actual +status. Another expensive operation in user space, for those using +very large maps, is discovering if a mount is present. Usually this +involves scanning /proc/mounts and since it needs to be done quite +often it can introduce significant overhead when there are many entries +in the mount table. An operation to lookup the mount status of a mount +point dentry (covered or not) has also been added. + +Current kernel development policy recommends avoiding the use of the +ioctl mechanism in favor of systems such as Netlink. An implementation +using this system was attempted to evaluate its suitability and it was +found to be inadequate, in this case. The Generic Netlink system was +used for this as raw Netlink would lead to a significant increase in +complexity. There's no question that the Generic Netlink system is an +elegant solution for common case ioctl functions but it's not a complete +replacement probably because its primary purpose in life is to be a +message bus implementation rather than specifically an ioctl replacement. +While it would be possible to work around this there is one concern +that lead to the decision to not use it. This is that the autofs +expire in the daemon has become far to complex because umount +candidates are enumerated, almost for no other reason than to "count" +the number of times to call the expire ioctl. This involves scanning +the mount table which has proved to be a big overhead for users with +large maps. The best way to improve this is try and get back to the +way the expire was done long ago. That is, when an expire request is +issued for a mount (file handle) we should continually call back to +the daemon until we can't umount any more mounts, then return the +appropriate status to the daemon. At the moment we just expire one +mount at a time. A Generic Netlink implementation would exclude this +possibility for future development due to the requirements of the +message bus architecture. + + +autofs Miscellaneous Device mount control interface +==================================================== + +The control interface is opening a device node, typically /dev/autofs. + +All the ioctls use a common structure to pass the needed parameter +information and return operation results:: + + struct autofs_dev_ioctl { + __u32 ver_major; + __u32 ver_minor; + __u32 size; /* total size of data passed in + * including this struct */ + __s32 ioctlfd; /* automount command fd */ + + /* Command parameters */ + union { + struct args_protover protover; + struct args_protosubver protosubver; + struct args_openmount openmount; + struct args_ready ready; + struct args_fail fail; + struct args_setpipefd setpipefd; + struct args_timeout timeout; + struct args_requester requester; + struct args_expire expire; + struct args_askumount askumount; + struct args_ismountpoint ismountpoint; + }; + + char path[]; + }; + +The ioctlfd field is a mount point file descriptor of an autofs mount +point. It is returned by the open call and is used by all calls except +the check for whether a given path is a mount point, where it may +optionally be used to check a specific mount corresponding to a given +mount point file descriptor, and when requesting the uid and gid of the +last successful mount on a directory within the autofs file system. + +The union is used to communicate parameters and results of calls made +as described below. + +The path field is used to pass a path where it is needed and the size field +is used account for the increased structure length when translating the +structure sent from user space. + +This structure can be initialized before setting specific fields by using +the void function call init_autofs_dev_ioctl(``struct autofs_dev_ioctl *``). + +All of the ioctls perform a copy of this structure from user space to +kernel space and return -EINVAL if the size parameter is smaller than +the structure size itself, -ENOMEM if the kernel memory allocation fails +or -EFAULT if the copy itself fails. Other checks include a version check +of the compiled in user space version against the module version and a +mismatch results in a -EINVAL return. If the size field is greater than +the structure size then a path is assumed to be present and is checked to +ensure it begins with a "/" and is NULL terminated, otherwise -EINVAL is +returned. Following these checks, for all ioctl commands except +AUTOFS_DEV_IOCTL_VERSION_CMD, AUTOFS_DEV_IOCTL_OPENMOUNT_CMD and +AUTOFS_DEV_IOCTL_CLOSEMOUNT_CMD the ioctlfd is validated and if it is +not a valid descriptor or doesn't correspond to an autofs mount point +an error of -EBADF, -ENOTTY or -EINVAL (not an autofs descriptor) is +returned. + + +The ioctls +========== + +An example of an implementation which uses this interface can be seen +in autofs version 5.0.4 and later in file lib/dev-ioctl-lib.c of the +distribution tar available for download from kernel.org in directory +/pub/linux/daemons/autofs/v5. + +The device node ioctl operations implemented by this interface are: + + +AUTOFS_DEV_IOCTL_VERSION +------------------------ + +Get the major and minor version of the autofs device ioctl kernel module +implementation. It requires an initialized struct autofs_dev_ioctl as an +input parameter and sets the version information in the passed in structure. +It returns 0 on success or the error -EINVAL if a version mismatch is +detected. + + +AUTOFS_DEV_IOCTL_PROTOVER_CMD and AUTOFS_DEV_IOCTL_PROTOSUBVER_CMD +------------------------------------------------------------------ + +Get the major and minor version of the autofs protocol version understood +by loaded module. This call requires an initialized struct autofs_dev_ioctl +with the ioctlfd field set to a valid autofs mount point descriptor +and sets the requested version number in version field of struct args_protover +or sub_version field of struct args_protosubver. These commands return +0 on success or one of the negative error codes if validation fails. + + +AUTOFS_DEV_IOCTL_OPENMOUNT and AUTOFS_DEV_IOCTL_CLOSEMOUNT +---------------------------------------------------------- + +Obtain and release a file descriptor for an autofs managed mount point +path. The open call requires an initialized struct autofs_dev_ioctl with +the path field set and the size field adjusted appropriately as well +as the devid field of struct args_openmount set to the device number of +the autofs mount. The device number can be obtained from the mount options +shown in /proc/mounts. The close call requires an initialized struct +autofs_dev_ioct with the ioctlfd field set to the descriptor obtained +from the open call. The release of the file descriptor can also be done +with close(2) so any open descriptors will also be closed at process exit. +The close call is included in the implemented operations largely for +completeness and to provide for a consistent user space implementation. + + +AUTOFS_DEV_IOCTL_READY_CMD and AUTOFS_DEV_IOCTL_FAIL_CMD +-------------------------------------------------------- + +Return mount and expire result status from user space to the kernel. +Both of these calls require an initialized struct autofs_dev_ioctl +with the ioctlfd field set to the descriptor obtained from the open +call and the token field of struct args_ready or struct args_fail set +to the wait queue token number, received by user space in the foregoing +mount or expire request. The status field of struct args_fail is set to +the errno of the operation. It is set to 0 on success. + + +AUTOFS_DEV_IOCTL_SETPIPEFD_CMD +------------------------------ + +Set the pipe file descriptor used for kernel communication to the daemon. +Normally this is set at mount time using an option but when reconnecting +to a existing mount we need to use this to tell the autofs mount about +the new kernel pipe descriptor. In order to protect mounts against +incorrectly setting the pipe descriptor we also require that the autofs +mount be catatonic (see next call). + +The call requires an initialized struct autofs_dev_ioctl with the +ioctlfd field set to the descriptor obtained from the open call and +the pipefd field of struct args_setpipefd set to descriptor of the pipe. +On success the call also sets the process group id used to identify the +controlling process (eg. the owning automount(8) daemon) to the process +group of the caller. + + +AUTOFS_DEV_IOCTL_CATATONIC_CMD +------------------------------ + +Make the autofs mount point catatonic. The autofs mount will no longer +issue mount requests, the kernel communication pipe descriptor is released +and any remaining waits in the queue released. + +The call requires an initialized struct autofs_dev_ioctl with the +ioctlfd field set to the descriptor obtained from the open call. + + +AUTOFS_DEV_IOCTL_TIMEOUT_CMD +---------------------------- + +Set the expire timeout for mounts within an autofs mount point. + +The call requires an initialized struct autofs_dev_ioctl with the +ioctlfd field set to the descriptor obtained from the open call. + + +AUTOFS_DEV_IOCTL_REQUESTER_CMD +------------------------------ + +Return the uid and gid of the last process to successfully trigger a the +mount on the given path dentry. + +The call requires an initialized struct autofs_dev_ioctl with the path +field set to the mount point in question and the size field adjusted +appropriately. Upon return the uid field of struct args_requester contains +the uid and gid field the gid. + +When reconstructing an autofs mount tree with active mounts we need to +re-connect to mounts that may have used the original process uid and +gid (or string variations of them) for mount lookups within the map entry. +This call provides the ability to obtain this uid and gid so they may be +used by user space for the mount map lookups. + + +AUTOFS_DEV_IOCTL_EXPIRE_CMD +--------------------------- + +Issue an expire request to the kernel for an autofs mount. Typically +this ioctl is called until no further expire candidates are found. + +The call requires an initialized struct autofs_dev_ioctl with the +ioctlfd field set to the descriptor obtained from the open call. In +addition an immediate expire that's independent of the mount timeout, +and a forced expire that's independent of whether the mount is busy, +can be requested by setting the how field of struct args_expire to +AUTOFS_EXP_IMMEDIATE or AUTOFS_EXP_FORCED, respectively . If no +expire candidates can be found the ioctl returns -1 with errno set to +EAGAIN. + +This call causes the kernel module to check the mount corresponding +to the given ioctlfd for mounts that can be expired, issues an expire +request back to the daemon and waits for completion. + +AUTOFS_DEV_IOCTL_ASKUMOUNT_CMD +------------------------------ + +Checks if an autofs mount point is in use. + +The call requires an initialized struct autofs_dev_ioctl with the +ioctlfd field set to the descriptor obtained from the open call and +it returns the result in the may_umount field of struct args_askumount, +1 for busy and 0 otherwise. + + +AUTOFS_DEV_IOCTL_ISMOUNTPOINT_CMD +--------------------------------- + +Check if the given path is a mountpoint. + +The call requires an initialized struct autofs_dev_ioctl. There are two +possible variations. Both use the path field set to the path of the mount +point to check and the size field adjusted appropriately. One uses the +ioctlfd field to identify a specific mount point to check while the other +variation uses the path and optionally in.type field of struct args_ismountpoint +set to an autofs mount type. The call returns 1 if this is a mount point +and sets out.devid field to the device number of the mount and out.magic +field to the relevant super block magic number (described below) or 0 if +it isn't a mountpoint. In both cases the device number (as returned +by new_encode_dev()) is returned in out.devid field. + +If supplied with a file descriptor we're looking for a specific mount, +not necessarily at the top of the mounted stack. In this case the path +the descriptor corresponds to is considered a mountpoint if it is itself +a mountpoint or contains a mount, such as a multi-mount without a root +mount. In this case we return 1 if the descriptor corresponds to a mount +point and also returns the super magic of the covering mount if there +is one or 0 if it isn't a mountpoint. + +If a path is supplied (and the ioctlfd field is set to -1) then the path +is looked up and is checked to see if it is the root of a mount. If a +type is also given we are looking for a particular autofs mount and if +a match isn't found a fail is returned. If the located path is the +root of a mount 1 is returned along with the super magic of the mount +or 0 otherwise. diff --git a/Documentation/filesystems/autofs.rst b/Documentation/filesystems/autofs.rst new file mode 100644 index 000000000..1b495768e --- /dev/null +++ b/Documentation/filesystems/autofs.rst @@ -0,0 +1,580 @@ +===================== +autofs - how it works +===================== + +Purpose +======= + +The goal of autofs is to provide on-demand mounting and race free +automatic unmounting of various other filesystems. This provides two +key advantages: + +1. There is no need to delay boot until all filesystems that + might be needed are mounted. Processes that try to access those + slow filesystems might be delayed but other processes can + continue freely. This is particularly important for + network filesystems (e.g. NFS) or filesystems stored on + media with a media-changing robot. + +2. The names and locations of filesystems can be stored in + a remote database and can change at any time. The content + in that data base at the time of access will be used to provide + a target for the access. The interpretation of names in the + filesystem can even be programmatic rather than database-backed, + allowing wildcards for example, and can vary based on the user who + first accessed a name. + +Context +======= + +The "autofs" filesystem module is only one part of an autofs system. +There also needs to be a user-space program which looks up names +and mounts filesystems. This will often be the "automount" program, +though other tools including "systemd" can make use of "autofs". +This document describes only the kernel module and the interactions +required with any user-space program. Subsequent text refers to this +as the "automount daemon" or simply "the daemon". + +"autofs" is a Linux kernel module with provides the "autofs" +filesystem type. Several "autofs" filesystems can be mounted and they +can each be managed separately, or all managed by the same daemon. + +Content +======= + +An autofs filesystem can contain 3 sorts of objects: directories, +symbolic links and mount traps. Mount traps are directories with +extra properties as described in the next section. + +Objects can only be created by the automount daemon: symlinks are +created with a regular `symlink` system call, while directories and +mount traps are created with `mkdir`. The determination of whether a +directory should be a mount trap is based on a master map. This master +map is consulted by autofs to determine which directories are mount +points. Mount points can be *direct*/*indirect*/*offset*. +On most systems, the default master map is located at */etc/auto.master*. + +If neither the *direct* or *offset* mount options are given (so the +mount is considered to be *indirect*), then the root directory is +always a regular directory, otherwise it is a mount trap when it is +empty and a regular directory when not empty. Note that *direct* and +*offset* are treated identically so a concise summary is that the root +directory is a mount trap only if the filesystem is mounted *direct* +and the root is empty. + +Directories created in the root directory are mount traps only if the +filesystem is mounted *indirect* and they are empty. + +Directories further down the tree depend on the *maxproto* mount +option and particularly whether it is less than five or not. +When *maxproto* is five, no directories further down the +tree are ever mount traps, they are always regular directories. When +the *maxproto* is four (or three), these directories are mount traps +precisely when they are empty. + +So: non-empty (i.e. non-leaf) directories are never mount traps. Empty +directories are sometimes mount traps, and sometimes not depending on +where in the tree they are (root, top level, or lower), the *maxproto*, +and whether the mount was *indirect* or not. + +Mount Traps +=========== + +A core element of the implementation of autofs is the Mount Traps +which are provided by the Linux VFS. Any directory provided by a +filesystem can be designated as a trap. This involves two separate +features that work together to allow autofs to do its job. + +**DCACHE_NEED_AUTOMOUNT** + +If a dentry has the DCACHE_NEED_AUTOMOUNT flag set (which gets set if +the inode has S_AUTOMOUNT set, or can be set directly) then it is +(potentially) a mount trap. Any access to this directory beyond a +"`stat`" will (normally) cause the `d_op->d_automount()` dentry operation +to be called. The task of this method is to find the filesystem that +should be mounted on the directory and to return it. The VFS is +responsible for actually mounting the root of this filesystem on the +directory. + +autofs doesn't find the filesystem itself but sends a message to the +automount daemon asking it to find and mount the filesystem. The +autofs `d_automount` method then waits for the daemon to report that +everything is ready. It will then return "`NULL`" indicating that the +mount has already happened. The VFS doesn't try to mount anything but +follows down the mount that is already there. + +This functionality is sufficient for some users of mount traps such +as NFS which creates traps so that mountpoints on the server can be +reflected on the client. However it is not sufficient for autofs. As +mounting onto a directory is considered to be "beyond a `stat`", the +automount daemon would not be able to mount a filesystem on the 'trap' +directory without some way to avoid getting caught in the trap. For +that purpose there is another flag. + +**DCACHE_MANAGE_TRANSIT** + +If a dentry has DCACHE_MANAGE_TRANSIT set then two very different but +related behaviours are invoked, both using the `d_op->d_manage()` +dentry operation. + +Firstly, before checking to see if any filesystem is mounted on the +directory, d_manage() will be called with the `rcu_walk` parameter set +to `false`. It may return one of three things: + +- A return value of zero indicates that there is nothing special + about this dentry and normal checks for mounts and automounts + should proceed. + + autofs normally returns zero, but first waits for any + expiry (automatic unmounting of the mounted filesystem) to + complete. This avoids races. + +- A return value of `-EISDIR` tells the VFS to ignore any mounts + on the directory and to not consider calling `->d_automount()`. + This effectively disables the **DCACHE_NEED_AUTOMOUNT** flag + causing the directory not be a mount trap after all. + + autofs returns this if it detects that the process performing the + lookup is the automount daemon and that the mount has been + requested but has not yet completed. How it determines this is + discussed later. This allows the automount daemon not to get + caught in the mount trap. + + There is a subtlety here. It is possible that a second autofs + filesystem can be mounted below the first and for both of them to + be managed by the same daemon. For the daemon to be able to mount + something on the second it must be able to "walk" down past the + first. This means that d_manage cannot *always* return -EISDIR for + the automount daemon. It must only return it when a mount has + been requested, but has not yet completed. + + `d_manage` also returns `-EISDIR` if the dentry shouldn't be a + mount trap, either because it is a symbolic link or because it is + not empty. + +- Any other negative value is treated as an error and returned + to the caller. + + autofs can return + + - -ENOENT if the automount daemon failed to mount anything, + - -ENOMEM if it ran out of memory, + - -EINTR if a signal arrived while waiting for expiry to + complete + - or any other error sent down by the automount daemon. + + +The second use case only occurs during an "RCU-walk" and so `rcu_walk` +will be set. + +An RCU-walk is a fast and lightweight process for walking down a +filename path (i.e. it is like running on tip-toes). RCU-walk cannot +cope with all situations so when it finds a difficulty it falls back +to "REF-walk", which is slower but more robust. + +RCU-walk will never call `->d_automount`; the filesystems must already +be mounted or RCU-walk cannot handle the path. +To determine if a mount-trap is safe for RCU-walk mode it calls +`->d_manage()` with `rcu_walk` set to `true`. + +In this case `d_manage()` must avoid blocking and should avoid taking +spinlocks if at all possible. Its sole purpose is to determine if it +would be safe to follow down into any mounted directory and the only +reason that it might not be is if an expiry of the mount is +underway. + +In the `rcu_walk` case, `d_manage()` cannot return -EISDIR to tell the +VFS that this is a directory that doesn't require d_automount. If +`rcu_walk` sees a dentry with DCACHE_NEED_AUTOMOUNT set but nothing +mounted, it *will* fall back to REF-walk. `d_manage()` cannot make the +VFS remain in RCU-walk mode, but can only tell it to get out of +RCU-walk mode by returning `-ECHILD`. + +So `d_manage()`, when called with `rcu_walk` set, should either return +-ECHILD if there is any reason to believe it is unsafe to enter the +mounted filesystem, otherwise it should return 0. + +autofs will return `-ECHILD` if an expiry of the filesystem has been +initiated or is being considered, otherwise it returns 0. + + +Mountpoint expiry +================= + +The VFS has a mechanism for automatically expiring unused mounts, +much as it can expire any unused dentry information from the dcache. +This is guided by the MNT_SHRINKABLE flag. This only applies to +mounts that were created by `d_automount()` returning a filesystem to be +mounted. As autofs doesn't return such a filesystem but leaves the +mounting to the automount daemon, it must involve the automount daemon +in unmounting as well. This also means that autofs has more control +over expiry. + +The VFS also supports "expiry" of mounts using the MNT_EXPIRE flag to +the `umount` system call. Unmounting with MNT_EXPIRE will fail unless +a previous attempt had been made, and the filesystem has been inactive +and untouched since that previous attempt. autofs does not depend on +this but has its own internal tracking of whether filesystems were +recently used. This allows individual names in the autofs directory +to expire separately. + +With version 4 of the protocol, the automount daemon can try to +unmount any filesystems mounted on the autofs filesystem or remove any +symbolic links or empty directories any time it likes. If the unmount +or removal is successful the filesystem will be returned to the state +it was before the mount or creation, so that any access of the name +will trigger normal auto-mount processing. In particular, `rmdir` and +`unlink` do not leave negative entries in the dcache as a normal +filesystem would, so an attempt to access a recently-removed object is +passed to autofs for handling. + +With version 5, this is not safe except for unmounting from top-level +directories. As lower-level directories are never mount traps, other +processes will see an empty directory as soon as the filesystem is +unmounted. So it is generally safest to use the autofs expiry +protocol described below. + +Normally the daemon only wants to remove entries which haven't been +used for a while. For this purpose autofs maintains a "`last_used`" +time stamp on each directory or symlink. For symlinks it genuinely +does record the last time the symlink was "used" or followed to find +out where it points to. For directories the field is used slightly +differently. The field is updated at mount time and during expire +checks if it is found to be in use (ie. open file descriptor or +process working directory) and during path walks. The update done +during path walks prevents frequent expire and immediate mount of +frequently accessed automounts. But in the case where a GUI continually +access or an application frequently scans an autofs directory tree +there can be an accumulation of mounts that aren't actually being +used. To cater for this case the "`strictexpire`" autofs mount option +can be used to avoid the "`last_used`" update on path walk thereby +preventing this apparent inability to expire mounts that aren't +really in use. + +The daemon is able to ask autofs if anything is due to be expired, +using an `ioctl` as discussed later. For a *direct* mount, autofs +considers if the entire mount-tree can be unmounted or not. For an +*indirect* mount, autofs considers each of the names in the top level +directory to determine if any of those can be unmounted and cleaned +up. + +There is an option with indirect mounts to consider each of the leaves +that has been mounted on instead of considering the top-level names. +This was originally intended for compatibility with version 4 of autofs +and should be considered as deprecated for Sun Format automount maps. +However, it may be used again for amd format mount maps (which are +generally indirect maps) because the amd automounter allows for the +setting of an expire timeout for individual mounts. But there are +some difficulties in making the needed changes for this. + +When autofs considers a directory it checks the `last_used` time and +compares it with the "timeout" value set when the filesystem was +mounted, though this check is ignored in some cases. It also checks if +the directory or anything below it is in use. For symbolic links, +only the `last_used` time is ever considered. + +If both appear to support expiring the directory or symlink, an action +is taken. + +There are two ways to ask autofs to consider expiry. The first is to +use the **AUTOFS_IOC_EXPIRE** ioctl. This only works for indirect +mounts. If it finds something in the root directory to expire it will +return the name of that thing. Once a name has been returned the +automount daemon needs to unmount any filesystems mounted below the +name normally. As described above, this is unsafe for non-toplevel +mounts in a version-5 autofs. For this reason the current `automount(8)` +does not use this ioctl. + +The second mechanism uses either the **AUTOFS_DEV_IOCTL_EXPIRE_CMD** or +the **AUTOFS_IOC_EXPIRE_MULTI** ioctl. This will work for both direct and +indirect mounts. If it selects an object to expire, it will notify +the daemon using the notification mechanism described below. This +will block until the daemon acknowledges the expiry notification. +This implies that the "`EXPIRE`" ioctl must be sent from a different +thread than the one which handles notification. + +While the ioctl is blocking, the entry is marked as "expiring" and +`d_manage` will block until the daemon affirms that the unmount has +completed (together with removing any directories that might have been +necessary), or has been aborted. + +Communicating with autofs: detecting the daemon +=============================================== + +There are several forms of communication between the automount daemon +and the filesystem. As we have already seen, the daemon can create and +remove directories and symlinks using normal filesystem operations. +autofs knows whether a process requesting some operation is the daemon +or not based on its process-group id number (see getpgid(1)). + +When an autofs filesystem is mounted the pgid of the mounting +processes is recorded unless the "pgrp=" option is given, in which +case that number is recorded instead. Any request arriving from a +process in that process group is considered to come from the daemon. +If the daemon ever has to be stopped and restarted a new pgid can be +provided through an ioctl as will be described below. + +Communicating with autofs: the event pipe +========================================= + +When an autofs filesystem is mounted, the 'write' end of a pipe must +be passed using the 'fd=' mount option. autofs will write +notification messages to this pipe for the daemon to respond to. +For version 5, the format of the message is:: + + struct autofs_v5_packet { + struct autofs_packet_hdr hdr; + autofs_wqt_t wait_queue_token; + __u32 dev; + __u64 ino; + __u32 uid; + __u32 gid; + __u32 pid; + __u32 tgid; + __u32 len; + char name[NAME_MAX+1]; + }; + +And the format of the header is:: + + struct autofs_packet_hdr { + int proto_version; /* Protocol version */ + int type; /* Type of packet */ + }; + +where the type is one of :: + + autofs_ptype_missing_indirect + autofs_ptype_expire_indirect + autofs_ptype_missing_direct + autofs_ptype_expire_direct + +so messages can indicate that a name is missing (something tried to +access it but it isn't there) or that it has been selected for expiry. + +The pipe will be set to "packet mode" (equivalent to passing +`O_DIRECT`) to _pipe2(2)_ so that a read from the pipe will return at +most one packet, and any unread portion of a packet will be discarded. + +The `wait_queue_token` is a unique number which can identify a +particular request to be acknowledged. When a message is sent over +the pipe the affected dentry is marked as either "active" or +"expiring" and other accesses to it block until the message is +acknowledged using one of the ioctls below with the relevant +`wait_queue_token`. + +Communicating with autofs: root directory ioctls +================================================ + +The root directory of an autofs filesystem will respond to a number of +ioctls. The process issuing the ioctl must have the CAP_SYS_ADMIN +capability, or must be the automount daemon. + +The available ioctl commands are: + +- **AUTOFS_IOC_READY**: + a notification has been handled. The argument + to the ioctl command is the "wait_queue_token" number + corresponding to the notification being acknowledged. +- **AUTOFS_IOC_FAIL**: + similar to above, but indicates failure with + the error code `ENOENT`. +- **AUTOFS_IOC_CATATONIC**: + Causes the autofs to enter "catatonic" + mode meaning that it stops sending notifications to the daemon. + This mode is also entered if a write to the pipe fails. +- **AUTOFS_IOC_PROTOVER**: + This returns the protocol version in use. +- **AUTOFS_IOC_PROTOSUBVER**: + Returns the protocol sub-version which + is really a version number for the implementation. +- **AUTOFS_IOC_SETTIMEOUT**: + This passes a pointer to an unsigned + long. The value is used to set the timeout for expiry, and + the current timeout value is stored back through the pointer. +- **AUTOFS_IOC_ASKUMOUNT**: + Returns, in the pointed-to `int`, 1 if + the filesystem could be unmounted. This is only a hint as + the situation could change at any instant. This call can be + used to avoid a more expensive full unmount attempt. +- **AUTOFS_IOC_EXPIRE**: + as described above, this asks if there is + anything suitable to expire. A pointer to a packet:: + + struct autofs_packet_expire_multi { + struct autofs_packet_hdr hdr; + autofs_wqt_t wait_queue_token; + int len; + char name[NAME_MAX+1]; + }; + + is required. This is filled in with the name of something + that can be unmounted or removed. If nothing can be expired, + `errno` is set to `EAGAIN`. Even though a `wait_queue_token` + is present in the structure, no "wait queue" is established + and no acknowledgment is needed. +- **AUTOFS_IOC_EXPIRE_MULTI**: + This is similar to + **AUTOFS_IOC_EXPIRE** except that it causes notification to be + sent to the daemon, and it blocks until the daemon acknowledges. + The argument is an integer which can contain two different flags. + + **AUTOFS_EXP_IMMEDIATE** causes `last_used` time to be ignored + and objects are expired if the are not in use. + + **AUTOFS_EXP_FORCED** causes the in use status to be ignored + and objects are expired ieven if they are in use. This assumes + that the daemon has requested this because it is capable of + performing the umount. + + **AUTOFS_EXP_LEAVES** will select a leaf rather than a top-level + name to expire. This is only safe when *maxproto* is 4. + +Communicating with autofs: char-device ioctls +============================================= + +It is not always possible to open the root of an autofs filesystem, +particularly a *direct* mounted filesystem. If the automount daemon +is restarted there is no way for it to regain control of existing +mounts using any of the above communication channels. To address this +need there is a "miscellaneous" character device (major 10, minor 235) +which can be used to communicate directly with the autofs filesystem. +It requires CAP_SYS_ADMIN for access. + +The 'ioctl's that can be used on this device are described in a separate +document `autofs-mount-control.txt`, and are summarised briefly here. +Each ioctl is passed a pointer to an `autofs_dev_ioctl` structure:: + + struct autofs_dev_ioctl { + __u32 ver_major; + __u32 ver_minor; + __u32 size; /* total size of data passed in + * including this struct */ + __s32 ioctlfd; /* automount command fd */ + + /* Command parameters */ + union { + struct args_protover protover; + struct args_protosubver protosubver; + struct args_openmount openmount; + struct args_ready ready; + struct args_fail fail; + struct args_setpipefd setpipefd; + struct args_timeout timeout; + struct args_requester requester; + struct args_expire expire; + struct args_askumount askumount; + struct args_ismountpoint ismountpoint; + }; + + char path[]; + }; + +For the **OPEN_MOUNT** and **IS_MOUNTPOINT** commands, the target +filesystem is identified by the `path`. All other commands identify +the filesystem by the `ioctlfd` which is a file descriptor open on the +root, and which can be returned by **OPEN_MOUNT**. + +The `ver_major` and `ver_minor` are in/out parameters which check that +the requested version is supported, and report the maximum version +that the kernel module can support. + +Commands are: + +- **AUTOFS_DEV_IOCTL_VERSION_CMD**: + does nothing, except validate and + set version numbers. +- **AUTOFS_DEV_IOCTL_OPENMOUNT_CMD**: + return an open file descriptor + on the root of an autofs filesystem. The filesystem is identified + by name and device number, which is stored in `openmount.devid`. + Device numbers for existing filesystems can be found in + `/proc/self/mountinfo`. +- **AUTOFS_DEV_IOCTL_CLOSEMOUNT_CMD**: + same as `close(ioctlfd)`. +- **AUTOFS_DEV_IOCTL_SETPIPEFD_CMD**: + if the filesystem is in + catatonic mode, this can provide the write end of a new pipe + in `setpipefd.pipefd` to re-establish communication with a daemon. + The process group of the calling process is used to identify the + daemon. +- **AUTOFS_DEV_IOCTL_REQUESTER_CMD**: + `path` should be a + name within the filesystem that has been auto-mounted on. + On successful return, `requester.uid` and `requester.gid` will be + the UID and GID of the process which triggered that mount. +- **AUTOFS_DEV_IOCTL_ISMOUNTPOINT_CMD**: + Check if path is a + mountpoint of a particular type - see separate documentation for + details. + +- **AUTOFS_DEV_IOCTL_PROTOVER_CMD** +- **AUTOFS_DEV_IOCTL_PROTOSUBVER_CMD** +- **AUTOFS_DEV_IOCTL_READY_CMD** +- **AUTOFS_DEV_IOCTL_FAIL_CMD** +- **AUTOFS_DEV_IOCTL_CATATONIC_CMD** +- **AUTOFS_DEV_IOCTL_TIMEOUT_CMD** +- **AUTOFS_DEV_IOCTL_EXPIRE_CMD** +- **AUTOFS_DEV_IOCTL_ASKUMOUNT_CMD** + +These all have the same +function as the similarly named **AUTOFS_IOC** ioctls, except +that **FAIL** can be given an explicit error number in `fail.status` +instead of assuming `ENOENT`, and this **EXPIRE** command +corresponds to **AUTOFS_IOC_EXPIRE_MULTI**. + +Catatonic mode +============== + +As mentioned, an autofs mount can enter "catatonic" mode. This +happens if a write to the notification pipe fails, or if it is +explicitly requested by an `ioctl`. + +When entering catatonic mode, the pipe is closed and any pending +notifications are acknowledged with the error `ENOENT`. + +Once in catatonic mode attempts to access non-existing names will +result in `ENOENT` while attempts to access existing directories will +be treated in the same way as if they came from the daemon, so mount +traps will not fire. + +When the filesystem is mounted a _uid_ and _gid_ can be given which +set the ownership of directories and symbolic links. When the +filesystem is in catatonic mode, any process with a matching UID can +create directories or symlinks in the root directory, but not in other +directories. + +Catatonic mode can only be left via the +**AUTOFS_DEV_IOCTL_OPENMOUNT_CMD** ioctl on the `/dev/autofs`. + +The "ignore" mount option +========================= + +The "ignore" mount option can be used to provide a generic indicator +to applications that the mount entry should be ignored when displaying +mount information. + +In other OSes that provide autofs and that provide a mount list to user +space based on the kernel mount list a no-op mount option ("ignore" is +the one use on the most common OSes) is allowed so that autofs file +system users can optionally use it. + +This is intended to be used by user space programs to exclude autofs +mounts from consideration when reading the mounts list. + +autofs, name spaces, and shared mounts +====================================== + +With bind mounts and name spaces it is possible for an autofs +filesystem to appear at multiple places in one or more filesystem +name spaces. For this to work sensibly, the autofs filesystem should +always be mounted "shared". e.g. :: + + mount --make-shared /autofs/mount/point + +The automount daemon is only able to manage a single mount location for +an autofs filesystem and if mounts on that are not 'shared', other +locations will not behave as expected. In particular access to those +other locations will likely result in the `ELOOP` error :: + + Too many levels of symbolic links diff --git a/Documentation/filesystems/automount-support.rst b/Documentation/filesystems/automount-support.rst new file mode 100644 index 000000000..430f0b407 --- /dev/null +++ b/Documentation/filesystems/automount-support.rst @@ -0,0 +1,98 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================= +Automount Support +================= + + +Support is available for filesystems that wish to do automounting +support (such as kAFS which can be found in fs/afs/ and NFS in +fs/nfs/). This facility includes allowing in-kernel mounts to be +performed and mountpoint degradation to be requested. The latter can +also be requested by userspace. + + +In-Kernel Automounting +====================== + +See section "Mount Traps" of Documentation/filesystems/autofs.rst + +Then from userspace, you can just do something like:: + + [root@andromeda root]# mount -t afs \#root.afs. /afs + [root@andromeda root]# ls /afs + asd cambridge cambridge.redhat.com grand.central.org + [root@andromeda root]# ls /afs/cambridge + afsdoc + [root@andromeda root]# ls /afs/cambridge/afsdoc/ + ChangeLog html LICENSE pdf RELNOTES-1.2.2 + +And then if you look in the mountpoint catalogue, you'll see something like:: + + [root@andromeda root]# cat /proc/mounts + ... + #root.afs. /afs afs rw 0 0 + #root.cell. /afs/cambridge.redhat.com afs rw 0 0 + #afsdoc. /afs/cambridge.redhat.com/afsdoc afs rw 0 0 + + +Automatic Mountpoint Expiry +=========================== + +Automatic expiration of mountpoints is easy, provided you've mounted the +mountpoint to be expired in the automounting procedure outlined separately. + +To do expiration, you need to follow these steps: + + (1) Create at least one list off which the vfsmounts to be expired can be + hung. + + (2) When a new mountpoint is created in the ->d_automount method, add + the mnt to the list using mnt_set_expiry():: + + mnt_set_expiry(newmnt, &afs_vfsmounts); + + (3) When you want mountpoints to be expired, call mark_mounts_for_expiry() + with a pointer to this list. This will process the list, marking every + vfsmount thereon for potential expiry on the next call. + + If a vfsmount was already flagged for expiry, and if its usage count is 1 + (it's only referenced by its parent vfsmount), then it will be deleted + from the namespace and thrown away (effectively unmounted). + + It may prove simplest to simply call this at regular intervals, using + some sort of timed event to drive it. + +The expiration flag is cleared by calls to mntput. This means that expiration +will only happen on the second expiration request after the last time the +mountpoint was accessed. + +If a mountpoint is moved, it gets removed from the expiration list. If a bind +mount is made on an expirable mount, the new vfsmount will not be on the +expiration list and will not expire. + +If a namespace is copied, all mountpoints contained therein will be copied, +and the copies of those that are on an expiration list will be added to the +same expiration list. + + +Userspace Driven Expiry +======================= + +As an alternative, it is possible for userspace to request expiry of any +mountpoint (though some will be rejected - the current process's idea of the +rootfs for example). It does this by passing the MNT_EXPIRE flag to +umount(). This flag is considered incompatible with MNT_FORCE and MNT_DETACH. + +If the mountpoint in question is in referenced by something other than +umount() or its parent mountpoint, an EBUSY error will be returned and the +mountpoint will not be marked for expiration or unmounted. + +If the mountpoint was not already marked for expiry at that time, an EAGAIN +error will be given and it won't be unmounted. + +Otherwise if it was already marked and it wasn't referenced, unmounting will +take place as usual. + +Again, the expiration flag is cleared every time anything other than umount() +looks at a mountpoint. diff --git a/Documentation/filesystems/befs.rst b/Documentation/filesystems/befs.rst new file mode 100644 index 000000000..79f9740d7 --- /dev/null +++ b/Documentation/filesystems/befs.rst @@ -0,0 +1,128 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================= +BeOS filesystem for Linux +========================= + +Document last updated: Dec 6, 2001 + +Warning +======= +Make sure you understand that this is alpha software. This means that the +implementation is neither complete nor well-tested. + +I DISCLAIM ALL RESPONSIBILITY FOR ANY POSSIBLE BAD EFFECTS OF THIS CODE! + +License +======= +This software is covered by the GNU General Public License. +See the file COPYING for the complete text of the license. +Or the GNU website: <http://www.gnu.org/licenses/licenses.html> + +Author +====== +The largest part of the code written by Will Dyson <will_dyson@pobox.com> +He has been working on the code since Aug 13, 2001. See the changelog for +details. + +Original Author: Makoto Kato <m_kato@ga2.so-net.ne.jp> + +His original code can still be found at: +<http://hp.vector.co.jp/authors/VA008030/bfs/> + +Does anyone know of a more current email address for Makoto? He doesn't +respond to the address given above... + +This filesystem doesn't have a maintainer. + +What is this Driver? +==================== +This module implements the native filesystem of BeOS http://www.beincorporated.com/ +for the linux 2.4.1 and later kernels. Currently it is a read-only +implementation. + +Which is it, BFS or BEFS? +========================= +Be, Inc said, "BeOS Filesystem is officially called BFS, not BeFS". +But Unixware Boot Filesystem is called bfs, too. And they are already in +the kernel. Because of this naming conflict, on Linux the BeOS +filesystem is called befs. + +How to Install +============== +step 1. Install the BeFS patch into the source code tree of linux. + +Apply the patchfile to your kernel source tree. +Assuming that your kernel source is in /foo/bar/linux and the patchfile +is called patch-befs-xxx, you would do the following: + + cd /foo/bar/linux + patch -p1 < /path/to/patch-befs-xxx + +if the patching step fails (i.e. there are rejected hunks), you can try to +figure it out yourself (it shouldn't be hard), or mail the maintainer +(Will Dyson <will_dyson@pobox.com>) for help. + +step 2. Configuration & make kernel + +The linux kernel has many compile-time options. Most of them are beyond the +scope of this document. I suggest the Kernel-HOWTO document as a good general +reference on this topic. http://www.linuxdocs.org/HOWTOs/Kernel-HOWTO-4.html + +However, to use the BeFS module, you must enable it at configure time:: + + cd /foo/bar/linux + make menuconfig (or xconfig) + +The BeFS module is not a standard part of the linux kernel, so you must first +enable support for experimental code under the "Code maturity level" menu. + +Then, under the "Filesystems" menu will be an option called "BeFS +filesystem (experimental)", or something like that. Enable that option +(it is fine to make it a module). + +Save your kernel configuration and then build your kernel. + +step 3. Install + +See the kernel howto <http://www.linux.com/howto/Kernel-HOWTO.html> for +instructions on this critical step. + +Using BFS +========= +To use the BeOS filesystem, use filesystem type 'befs'. + +ex:: + + mount -t befs /dev/fd0 /beos + +Mount Options +============= + +============= =========================================================== +uid=nnn All files in the partition will be owned by user id nnn. +gid=nnn All files in the partition will be in group nnn. +iocharset=xxx Use xxx as the name of the NLS translation table. +debug The driver will output debugging information to the syslog. +============= =========================================================== + +How to Get Lastest Version +========================== + +The latest version is currently available at: +<http://befs-driver.sourceforge.net/> + +Any Known Bugs? +=============== +As of Jan 20, 2002: + + None + +Special Thanks +============== +Dominic Giampalo ... Writing "Practical file system design with Be filesystem" + +Hiroyuki Yamada ... Testing LinuxPPC. + + + diff --git a/Documentation/filesystems/bfs.rst b/Documentation/filesystems/bfs.rst new file mode 100644 index 000000000..ce14b9018 --- /dev/null +++ b/Documentation/filesystems/bfs.rst @@ -0,0 +1,60 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================== +BFS Filesystem for Linux +======================== + +The BFS filesystem is used by SCO UnixWare OS for the /stand slice, which +usually contains the kernel image and a few other files required for the +boot process. + +In order to access /stand partition under Linux you obviously need to +know the partition number and the kernel must support UnixWare disk slices +(CONFIG_UNIXWARE_DISKLABEL config option). However BFS support does not +depend on having UnixWare disklabel support because one can also mount +BFS filesystem via loopback:: + + # losetup /dev/loop0 stand.img + # mount -t bfs /dev/loop0 /mnt/stand + +where stand.img is a file containing the image of BFS filesystem. +When you have finished using it and umounted you need to also deallocate +/dev/loop0 device by:: + + # losetup -d /dev/loop0 + +You can simplify mounting by just typing:: + + # mount -t bfs -o loop stand.img /mnt/stand + +this will allocate the first available loopback device (and load loop.o +kernel module if necessary) automatically. If the loopback driver is not +loaded automatically, make sure that you have compiled the module and +that modprobe is functioning. Beware that umount will not deallocate +/dev/loopN device if /etc/mtab file on your system is a symbolic link to +/proc/mounts. You will need to do it manually using "-d" switch of +losetup(8). Read losetup(8) manpage for more info. + +To create the BFS image under UnixWare you need to find out first which +slice contains it. The command prtvtoc(1M) is your friend:: + + # prtvtoc /dev/rdsk/c0b0t0d0s0 + +(assuming your root disk is on target=0, lun=0, bus=0, controller=0). Then you +look for the slice with tag "STAND", which is usually slice 10. With this +information you can use dd(1) to create the BFS image:: + + # umount /stand + # dd if=/dev/rdsk/c0b0t0d0sa of=stand.img bs=512 + +Just in case, you can verify that you have done the right thing by checking +the magic number:: + + # od -Ad -tx4 stand.img | more + +The first 4 bytes should be 0x1badface. + +If you have any patches, questions or suggestions regarding this BFS +implementation please contact the author: + +Tigran Aivazian <aivazian.tigran@gmail.com> diff --git a/Documentation/filesystems/btrfs.rst b/Documentation/filesystems/btrfs.rst new file mode 100644 index 000000000..d0904f602 --- /dev/null +++ b/Documentation/filesystems/btrfs.rst @@ -0,0 +1,34 @@ +.. SPDX-License-Identifier: GPL-2.0 + +===== +BTRFS +===== + +Btrfs is a copy on write filesystem for Linux aimed at implementing advanced +features while focusing on fault tolerance, repair and easy administration. +Jointly developed by several companies, licensed under the GPL and open for +contribution from anyone. + +The main Btrfs features include: + + * Extent based file storage (2^64 max file size) + * Space efficient packing of small files + * Space efficient indexed directories + * Dynamic inode allocation + * Writable snapshots + * Subvolumes (separate internal filesystem roots) + * Object level mirroring and striping + * Checksums on data and metadata (multiple algorithms available) + * Compression + * Integrated multiple device support, with several raid algorithms + * Offline filesystem check + * Efficient incremental backup and FS mirroring + * Online filesystem defragmentation + +For more information please refer to the wiki + + https://btrfs.wiki.kernel.org + +that maintains information about administration tasks, frequently asked +questions, use cases, mount options, comprehensible changelogs, features, +manual pages, source code repositories, contacts etc. diff --git a/Documentation/filesystems/caching/backend-api.rst b/Documentation/filesystems/caching/backend-api.rst new file mode 100644 index 000000000..19fbf6b9a --- /dev/null +++ b/Documentation/filesystems/caching/backend-api.rst @@ -0,0 +1,727 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================== +FS-Cache Cache backend API +========================== + +The FS-Cache system provides an API by which actual caches can be supplied to +FS-Cache for it to then serve out to network filesystems and other interested +parties. + +This API is declared in <linux/fscache-cache.h>. + + +Initialising and Registering a Cache +==================================== + +To start off, a cache definition must be initialised and registered for each +cache the backend wants to make available. For instance, CacheFS does this in +the fill_super() operation on mounting. + +The cache definition (struct fscache_cache) should be initialised by calling:: + + void fscache_init_cache(struct fscache_cache *cache, + struct fscache_cache_ops *ops, + const char *idfmt, + ...); + +Where: + + * "cache" is a pointer to the cache definition; + + * "ops" is a pointer to the table of operations that the backend supports on + this cache; and + + * "idfmt" is a format and printf-style arguments for constructing a label + for the cache. + + +The cache should then be registered with FS-Cache by passing a pointer to the +previously initialised cache definition to:: + + int fscache_add_cache(struct fscache_cache *cache, + struct fscache_object *fsdef, + const char *tagname); + +Two extra arguments should also be supplied: + + * "fsdef" which should point to the object representation for the FS-Cache + master index in this cache. Netfs primary index entries will be created + here. FS-Cache keeps the caller's reference to the index object if + successful and will release it upon withdrawal of the cache. + + * "tagname" which, if given, should be a text string naming this cache. If + this is NULL, the identifier will be used instead. For CacheFS, the + identifier is set to name the underlying block device and the tag can be + supplied by mount. + +This function may return -ENOMEM if it ran out of memory or -EEXIST if the tag +is already in use. 0 will be returned on success. + + +Unregistering a Cache +===================== + +A cache can be withdrawn from the system by calling this function with a +pointer to the cache definition:: + + void fscache_withdraw_cache(struct fscache_cache *cache); + +In CacheFS's case, this is called by put_super(). + + +Security +======== + +The cache methods are executed one of two contexts: + + (1) that of the userspace process that issued the netfs operation that caused + the cache method to be invoked, or + + (2) that of one of the processes in the FS-Cache thread pool. + +In either case, this may not be an appropriate context in which to access the +cache. + +The calling process's fsuid, fsgid and SELinux security identities may need to +be masqueraded for the duration of the cache driver's access to the cache. +This is left to the cache to handle; FS-Cache makes no effort in this regard. + + +Control and Statistics Presentation +=================================== + +The cache may present data to the outside world through FS-Cache's interfaces +in sysfs and procfs - the former for control and the latter for statistics. + +A sysfs directory called /sys/fs/fscache/<cachetag>/ is created if CONFIG_SYSFS +is enabled. This is accessible through the kobject struct fscache_cache::kobj +and is for use by the cache as it sees fit. + + +Relevant Data Structures +======================== + + * Index/Data file FS-Cache representation cookie:: + + struct fscache_cookie { + struct fscache_object_def *def; + struct fscache_netfs *netfs; + void *netfs_data; + ... + }; + + The fields that might be of use to the backend describe the object + definition, the netfs definition and the netfs's data for this cookie. + The object definition contain functions supplied by the netfs for loading + and matching index entries; these are required to provide some of the + cache operations. + + + * In-cache object representation:: + + struct fscache_object { + int debug_id; + enum { + FSCACHE_OBJECT_RECYCLING, + ... + } state; + spinlock_t lock + struct fscache_cache *cache; + struct fscache_cookie *cookie; + ... + }; + + Structures of this type should be allocated by the cache backend and + passed to FS-Cache when requested by the appropriate cache operation. In + the case of CacheFS, they're embedded in CacheFS's internal object + structures. + + The debug_id is a simple integer that can be used in debugging messages + that refer to a particular object. In such a case it should be printed + using "OBJ%x" to be consistent with FS-Cache. + + Each object contains a pointer to the cookie that represents the object it + is backing. An object should retired when put_object() is called if it is + in state FSCACHE_OBJECT_RECYCLING. The fscache_object struct should be + initialised by calling fscache_object_init(object). + + + * FS-Cache operation record:: + + struct fscache_operation { + atomic_t usage; + struct fscache_object *object; + unsigned long flags; + #define FSCACHE_OP_EXCLUSIVE + void (*processor)(struct fscache_operation *op); + void (*release)(struct fscache_operation *op); + ... + }; + + FS-Cache has a pool of threads that it uses to give CPU time to the + various asynchronous operations that need to be done as part of driving + the cache. These are represented by the above structure. The processor + method is called to give the op CPU time, and the release method to get + rid of it when its usage count reaches 0. + + An operation can be made exclusive upon an object by setting the + appropriate flag before enqueuing it with fscache_enqueue_operation(). If + an operation needs more processing time, it should be enqueued again. + + + * FS-Cache retrieval operation record:: + + struct fscache_retrieval { + struct fscache_operation op; + struct address_space *mapping; + struct list_head *to_do; + ... + }; + + A structure of this type is allocated by FS-Cache to record retrieval and + allocation requests made by the netfs. This struct is then passed to the + backend to do the operation. The backend may get extra refs to it by + calling fscache_get_retrieval() and refs may be discarded by calling + fscache_put_retrieval(). + + A retrieval operation can be used by the backend to do retrieval work. To + do this, the retrieval->op.processor method pointer should be set + appropriately by the backend and fscache_enqueue_retrieval() called to + submit it to the thread pool. CacheFiles, for example, uses this to queue + page examination when it detects PG_lock being cleared. + + The to_do field is an empty list available for the cache backend to use as + it sees fit. + + + * FS-Cache storage operation record:: + + struct fscache_storage { + struct fscache_operation op; + pgoff_t store_limit; + ... + }; + + A structure of this type is allocated by FS-Cache to record outstanding + writes to be made. FS-Cache itself enqueues this operation and invokes + the write_page() method on the object at appropriate times to effect + storage. + + +Cache Operations +================ + +The cache backend provides FS-Cache with a table of operations that can be +performed on the denizens of the cache. These are held in a structure of type: + + :: + + struct fscache_cache_ops + + * Name of cache provider [mandatory]:: + + const char *name + + This isn't strictly an operation, but should be pointed at a string naming + the backend. + + + * Allocate a new object [mandatory]:: + + struct fscache_object *(*alloc_object)(struct fscache_cache *cache, + struct fscache_cookie *cookie) + + This method is used to allocate a cache object representation to back a + cookie in a particular cache. fscache_object_init() should be called on + the object to initialise it prior to returning. + + This function may also be used to parse the index key to be used for + multiple lookup calls to turn it into a more convenient form. FS-Cache + will call the lookup_complete() method to allow the cache to release the + form once lookup is complete or aborted. + + + * Look up and create object [mandatory]:: + + void (*lookup_object)(struct fscache_object *object) + + This method is used to look up an object, given that the object is already + allocated and attached to the cookie. This should instantiate that object + in the cache if it can. + + The method should call fscache_object_lookup_negative() as soon as + possible if it determines the object doesn't exist in the cache. If the + object is found to exist and the netfs indicates that it is valid then + fscache_obtained_object() should be called once the object is in a + position to have data stored in it. Similarly, fscache_obtained_object() + should also be called once a non-present object has been created. + + If a lookup error occurs, fscache_object_lookup_error() should be called + to abort the lookup of that object. + + + * Release lookup data [mandatory]:: + + void (*lookup_complete)(struct fscache_object *object) + + This method is called to ask the cache to release any resources it was + using to perform a lookup. + + + * Increment object refcount [mandatory]:: + + struct fscache_object *(*grab_object)(struct fscache_object *object) + + This method is called to increment the reference count on an object. It + may fail (for instance if the cache is being withdrawn) by returning NULL. + It should return the object pointer if successful. + + + * Lock/Unlock object [mandatory]:: + + void (*lock_object)(struct fscache_object *object) + void (*unlock_object)(struct fscache_object *object) + + These methods are used to exclusively lock an object. It must be possible + to schedule with the lock held, so a spinlock isn't sufficient. + + + * Pin/Unpin object [optional]:: + + int (*pin_object)(struct fscache_object *object) + void (*unpin_object)(struct fscache_object *object) + + These methods are used to pin an object into the cache. Once pinned an + object cannot be reclaimed to make space. Return -ENOSPC if there's not + enough space in the cache to permit this. + + + * Check coherency state of an object [mandatory]:: + + int (*check_consistency)(struct fscache_object *object) + + This method is called to have the cache check the saved auxiliary data of + the object against the netfs's idea of the state. 0 should be returned + if they're consistent and -ESTALE otherwise. -ENOMEM and -ERESTARTSYS + may also be returned. + + * Update object [mandatory]:: + + int (*update_object)(struct fscache_object *object) + + This is called to update the index entry for the specified object. The + new information should be in object->cookie->netfs_data. This can be + obtained by calling object->cookie->def->get_aux()/get_attr(). + + + * Invalidate data object [mandatory]:: + + int (*invalidate_object)(struct fscache_operation *op) + + This is called to invalidate a data object (as pointed to by op->object). + All the data stored for this object should be discarded and an + attr_changed operation should be performed. The caller will follow up + with an object update operation. + + fscache_op_complete() must be called on op before returning. + + + * Discard object [mandatory]:: + + void (*drop_object)(struct fscache_object *object) + + This method is called to indicate that an object has been unbound from its + cookie, and that the cache should release the object's resources and + retire it if it's in state FSCACHE_OBJECT_RECYCLING. + + This method should not attempt to release any references held by the + caller. The caller will invoke the put_object() method as appropriate. + + + * Release object reference [mandatory]:: + + void (*put_object)(struct fscache_object *object) + + This method is used to discard a reference to an object. The object may + be freed when all the references to it are released. + + + * Synchronise a cache [mandatory]:: + + void (*sync)(struct fscache_cache *cache) + + This is called to ask the backend to synchronise a cache with its backing + device. + + + * Dissociate a cache [mandatory]:: + + void (*dissociate_pages)(struct fscache_cache *cache) + + This is called to ask a cache to perform any page dissociations as part of + cache withdrawal. + + + * Notification that the attributes on a netfs file changed [mandatory]:: + + int (*attr_changed)(struct fscache_object *object); + + This is called to indicate to the cache that certain attributes on a netfs + file have changed (for example the maximum size a file may reach). The + cache can read these from the netfs by calling the cookie's get_attr() + method. + + The cache may use the file size information to reserve space on the cache. + It should also call fscache_set_store_limit() to indicate to FS-Cache the + highest byte it's willing to store for an object. + + This method may return -ve if an error occurred or the cache object cannot + be expanded. In such a case, the object will be withdrawn from service. + + This operation is run asynchronously from FS-Cache's thread pool, and + storage and retrieval operations from the netfs are excluded during the + execution of this operation. + + + * Reserve cache space for an object's data [optional]:: + + int (*reserve_space)(struct fscache_object *object, loff_t size); + + This is called to request that cache space be reserved to hold the data + for an object and the metadata used to track it. Zero size should be + taken as request to cancel a reservation. + + This should return 0 if successful, -ENOSPC if there isn't enough space + available, or -ENOMEM or -EIO on other errors. + + The reservation may exceed the current size of the object, thus permitting + future expansion. If the amount of space consumed by an object would + exceed the reservation, it's permitted to refuse requests to allocate + pages, but not required. An object may be pruned down to its reservation + size if larger than that already. + + + * Request page be read from cache [mandatory]:: + + int (*read_or_alloc_page)(struct fscache_retrieval *op, + struct page *page, + gfp_t gfp) + + This is called to attempt to read a netfs page from the cache, or to + reserve a backing block if not. FS-Cache will have done as much checking + as it can before calling, but most of the work belongs to the backend. + + If there's no page in the cache, then -ENODATA should be returned if the + backend managed to reserve a backing block; -ENOBUFS or -ENOMEM if it + didn't. + + If there is suitable data in the cache, then a read operation should be + queued and 0 returned. When the read finishes, fscache_end_io() should be + called. + + The fscache_mark_pages_cached() should be called for the page if any cache + metadata is retained. This will indicate to the netfs that the page needs + explicit uncaching. This operation takes a pagevec, thus allowing several + pages to be marked at once. + + The retrieval record pointed to by op should be retained for each page + queued and released when I/O on the page has been formally ended. + fscache_get/put_retrieval() are available for this purpose. + + The retrieval record may be used to get CPU time via the FS-Cache thread + pool. If this is desired, the op->op.processor should be set to point to + the appropriate processing routine, and fscache_enqueue_retrieval() should + be called at an appropriate point to request CPU time. For instance, the + retrieval routine could be enqueued upon the completion of a disk read. + The to_do field in the retrieval record is provided to aid in this. + + If an I/O error occurs, fscache_io_error() should be called and -ENOBUFS + returned if possible or fscache_end_io() called with a suitable error + code. + + fscache_put_retrieval() should be called after a page or pages are dealt + with. This will complete the operation when all pages are dealt with. + + + * Request pages be read from cache [mandatory]:: + + int (*read_or_alloc_pages)(struct fscache_retrieval *op, + struct list_head *pages, + unsigned *nr_pages, + gfp_t gfp) + + This is like the read_or_alloc_page() method, except it is handed a list + of pages instead of one page. Any pages on which a read operation is + started must be added to the page cache for the specified mapping and also + to the LRU. Such pages must also be removed from the pages list and + ``*nr_pages`` decremented per page. + + If there was an error such as -ENOMEM, then that should be returned; else + if one or more pages couldn't be read or allocated, then -ENOBUFS should + be returned; else if one or more pages couldn't be read, then -ENODATA + should be returned. If all the pages are dispatched then 0 should be + returned. + + + * Request page be allocated in the cache [mandatory]:: + + int (*allocate_page)(struct fscache_retrieval *op, + struct page *page, + gfp_t gfp) + + This is like the read_or_alloc_page() method, except that it shouldn't + read from the cache, even if there's data there that could be retrieved. + It should, however, set up any internal metadata required such that + the write_page() method can write to the cache. + + If there's no backing block available, then -ENOBUFS should be returned + (or -ENOMEM if there were other problems). If a block is successfully + allocated, then the netfs page should be marked and 0 returned. + + + * Request pages be allocated in the cache [mandatory]:: + + int (*allocate_pages)(struct fscache_retrieval *op, + struct list_head *pages, + unsigned *nr_pages, + gfp_t gfp) + + This is an multiple page version of the allocate_page() method. pages and + nr_pages should be treated as for the read_or_alloc_pages() method. + + + * Request page be written to cache [mandatory]:: + + int (*write_page)(struct fscache_storage *op, + struct page *page); + + This is called to write from a page on which there was a previously + successful read_or_alloc_page() call or similar. FS-Cache filters out + pages that don't have mappings. + + This method is called asynchronously from the FS-Cache thread pool. It is + not required to actually store anything, provided -ENODATA is then + returned to the next read of this page. + + If an error occurred, then a negative error code should be returned, + otherwise zero should be returned. FS-Cache will take appropriate action + in response to an error, such as withdrawing this object. + + If this method returns success then FS-Cache will inform the netfs + appropriately. + + + * Discard retained per-page metadata [mandatory]:: + + void (*uncache_page)(struct fscache_object *object, struct page *page) + + This is called when a netfs page is being evicted from the pagecache. The + cache backend should tear down any internal representation or tracking it + maintains for this page. + + +FS-Cache Utilities +================== + +FS-Cache provides some utilities that a cache backend may make use of: + + * Note occurrence of an I/O error in a cache:: + + void fscache_io_error(struct fscache_cache *cache) + + This tells FS-Cache that an I/O error occurred in the cache. After this + has been called, only resource dissociation operations (object and page + release) will be passed from the netfs to the cache backend for the + specified cache. + + This does not actually withdraw the cache. That must be done separately. + + + * Invoke the retrieval I/O completion function:: + + void fscache_end_io(struct fscache_retrieval *op, struct page *page, + int error); + + This is called to note the end of an attempt to retrieve a page. The + error value should be 0 if successful and an error otherwise. + + + * Record that one or more pages being retrieved or allocated have been dealt + with:: + + void fscache_retrieval_complete(struct fscache_retrieval *op, + int n_pages); + + This is called to record the fact that one or more pages have been dealt + with and are no longer the concern of this operation. When the number of + pages remaining in the operation reaches 0, the operation will be + completed. + + + * Record operation completion:: + + void fscache_op_complete(struct fscache_operation *op); + + This is called to record the completion of an operation. This deducts + this operation from the parent object's run state, potentially permitting + one or more pending operations to start running. + + + * Set highest store limit:: + + void fscache_set_store_limit(struct fscache_object *object, + loff_t i_size); + + This sets the limit FS-Cache imposes on the highest byte it's willing to + try and store for a netfs. Any page over this limit is automatically + rejected by fscache_read_alloc_page() and co with -ENOBUFS. + + + * Mark pages as being cached:: + + void fscache_mark_pages_cached(struct fscache_retrieval *op, + struct pagevec *pagevec); + + This marks a set of pages as being cached. After this has been called, + the netfs must call fscache_uncache_page() to unmark the pages. + + + * Perform coherency check on an object:: + + enum fscache_checkaux fscache_check_aux(struct fscache_object *object, + const void *data, + uint16_t datalen); + + This asks the netfs to perform a coherency check on an object that has + just been looked up. The cookie attached to the object will determine the + netfs to use. data and datalen should specify where the auxiliary data + retrieved from the cache can be found. + + One of three values will be returned: + + FSCACHE_CHECKAUX_OKAY + The coherency data indicates the object is valid as is. + + FSCACHE_CHECKAUX_NEEDS_UPDATE + The coherency data needs updating, but otherwise the object is + valid. + + FSCACHE_CHECKAUX_OBSOLETE + The coherency data indicates that the object is obsolete and should + be discarded. + + + * Initialise a freshly allocated object:: + + void fscache_object_init(struct fscache_object *object); + + This initialises all the fields in an object representation. + + + * Indicate the destruction of an object:: + + void fscache_object_destroyed(struct fscache_cache *cache); + + This must be called to inform FS-Cache that an object that belonged to a + cache has been destroyed and deallocated. This will allow continuation + of the cache withdrawal process when it is stopped pending destruction of + all the objects. + + + * Indicate negative lookup on an object:: + + void fscache_object_lookup_negative(struct fscache_object *object); + + This is called to indicate to FS-Cache that a lookup process for an object + found a negative result. + + This changes the state of an object to permit reads pending on lookup + completion to go off and start fetching data from the netfs server as it's + known at this point that there can't be any data in the cache. + + This may be called multiple times on an object. Only the first call is + significant - all subsequent calls are ignored. + + + * Indicate an object has been obtained:: + + void fscache_obtained_object(struct fscache_object *object); + + This is called to indicate to FS-Cache that a lookup process for an object + produced a positive result, or that an object was created. This should + only be called once for any particular object. + + This changes the state of an object to indicate: + + (1) if no call to fscache_object_lookup_negative() has been made on + this object, that there may be data available, and that reads can + now go and look for it; and + + (2) that writes may now proceed against this object. + + + * Indicate that object lookup failed:: + + void fscache_object_lookup_error(struct fscache_object *object); + + This marks an object as having encountered a fatal error (usually EIO) + and causes it to move into a state whereby it will be withdrawn as soon + as possible. + + + * Indicate that a stale object was found and discarded:: + + void fscache_object_retrying_stale(struct fscache_object *object); + + This is called to indicate that the lookup procedure found an object in + the cache that the netfs decided was stale. The object has been + discarded from the cache and the lookup will be performed again. + + + * Indicate that the caching backend killed an object:: + + void fscache_object_mark_killed(struct fscache_object *object, + enum fscache_why_object_killed why); + + This is called to indicate that the cache backend preemptively killed an + object. The why parameter should be set to indicate the reason: + + FSCACHE_OBJECT_IS_STALE + - the object was stale and needs discarding. + + FSCACHE_OBJECT_NO_SPACE + - there was insufficient cache space + + FSCACHE_OBJECT_WAS_RETIRED + - the object was retired when relinquished. + + FSCACHE_OBJECT_WAS_CULLED + - the object was culled to make space. + + + * Get and release references on a retrieval record:: + + void fscache_get_retrieval(struct fscache_retrieval *op); + void fscache_put_retrieval(struct fscache_retrieval *op); + + These two functions are used to retain a retrieval record while doing + asynchronous data retrieval and block allocation. + + + * Enqueue a retrieval record for processing:: + + void fscache_enqueue_retrieval(struct fscache_retrieval *op); + + This enqueues a retrieval record for processing by the FS-Cache thread + pool. One of the threads in the pool will invoke the retrieval record's + op->op.processor callback function. This function may be called from + within the callback function. + + + * List of object state names:: + + const char *fscache_object_states[]; + + For debugging purposes, this may be used to turn the state that an object + is in into a text string for display purposes. diff --git a/Documentation/filesystems/caching/cachefiles.rst b/Documentation/filesystems/caching/cachefiles.rst new file mode 100644 index 000000000..e58bc1fd3 --- /dev/null +++ b/Documentation/filesystems/caching/cachefiles.rst @@ -0,0 +1,484 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============================================== +CacheFiles: CACHE ON ALREADY MOUNTED FILESYSTEM +=============================================== + +.. Contents: + + (*) Overview. + + (*) Requirements. + + (*) Configuration. + + (*) Starting the cache. + + (*) Things to avoid. + + (*) Cache culling. + + (*) Cache structure. + + (*) Security model and SELinux. + + (*) A note on security. + + (*) Statistical information. + + (*) Debugging. + + + +Overview +======== + +CacheFiles is a caching backend that's meant to use as a cache a directory on +an already mounted filesystem of a local type (such as Ext3). + +CacheFiles uses a userspace daemon to do some of the cache management - such as +reaping stale nodes and culling. This is called cachefilesd and lives in +/sbin. + +The filesystem and data integrity of the cache are only as good as those of the +filesystem providing the backing services. Note that CacheFiles does not +attempt to journal anything since the journalling interfaces of the various +filesystems are very specific in nature. + +CacheFiles creates a misc character device - "/dev/cachefiles" - that is used +to communication with the daemon. Only one thing may have this open at once, +and while it is open, a cache is at least partially in existence. The daemon +opens this and sends commands down it to control the cache. + +CacheFiles is currently limited to a single cache. + +CacheFiles attempts to maintain at least a certain percentage of free space on +the filesystem, shrinking the cache by culling the objects it contains to make +space if necessary - see the "Cache Culling" section. This means it can be +placed on the same medium as a live set of data, and will expand to make use of +spare space and automatically contract when the set of data requires more +space. + + + +Requirements +============ + +The use of CacheFiles and its daemon requires the following features to be +available in the system and in the cache filesystem: + + - dnotify. + + - extended attributes (xattrs). + + - openat() and friends. + + - bmap() support on files in the filesystem (FIBMAP ioctl). + + - The use of bmap() to detect a partial page at the end of the file. + +It is strongly recommended that the "dir_index" option is enabled on Ext3 +filesystems being used as a cache. + + +Configuration +============= + +The cache is configured by a script in /etc/cachefilesd.conf. These commands +set up cache ready for use. The following script commands are available: + + brun <N>%, bcull <N>%, bstop <N>%, frun <N>%, fcull <N>%, fstop <N>% + Configure the culling limits. Optional. See the section on culling + The defaults are 7% (run), 5% (cull) and 1% (stop) respectively. + + The commands beginning with a 'b' are file space (block) limits, those + beginning with an 'f' are file count limits. + + dir <path> + Specify the directory containing the root of the cache. Mandatory. + + tag <name> + Specify a tag to FS-Cache to use in distinguishing multiple caches. + Optional. The default is "CacheFiles". + + debug <mask> + Specify a numeric bitmask to control debugging in the kernel module. + Optional. The default is zero (all off). The following values can be + OR'd into the mask to collect various information: + + == ================================================= + 1 Turn on trace of function entry (_enter() macros) + 2 Turn on trace of function exit (_leave() macros) + 4 Turn on trace of internal debug points (_debug()) + == ================================================= + + This mask can also be set through sysfs, eg:: + + echo 5 >/sys/modules/cachefiles/parameters/debug + + +Starting the Cache +================== + +The cache is started by running the daemon. The daemon opens the cache device, +configures the cache and tells it to begin caching. At that point the cache +binds to fscache and the cache becomes live. + +The daemon is run as follows:: + + /sbin/cachefilesd [-d]* [-s] [-n] [-f <configfile>] + +The flags are: + + ``-d`` + Increase the debugging level. This can be specified multiple times and + is cumulative with itself. + + ``-s`` + Send messages to stderr instead of syslog. + + ``-n`` + Don't daemonise and go into background. + + ``-f <configfile>`` + Use an alternative configuration file rather than the default one. + + +Things to Avoid +=============== + +Do not mount other things within the cache as this will cause problems. The +kernel module contains its own very cut-down path walking facility that ignores +mountpoints, but the daemon can't avoid them. + +Do not create, rename or unlink files and directories in the cache while the +cache is active, as this may cause the state to become uncertain. + +Renaming files in the cache might make objects appear to be other objects (the +filename is part of the lookup key). + +Do not change or remove the extended attributes attached to cache files by the +cache as this will cause the cache state management to get confused. + +Do not create files or directories in the cache, lest the cache get confused or +serve incorrect data. + +Do not chmod files in the cache. The module creates things with minimal +permissions to prevent random users being able to access them directly. + + +Cache Culling +============= + +The cache may need culling occasionally to make space. This involves +discarding objects from the cache that have been used less recently than +anything else. Culling is based on the access time of data objects. Empty +directories are culled if not in use. + +Cache culling is done on the basis of the percentage of blocks and the +percentage of files available in the underlying filesystem. There are six +"limits": + + brun, frun + If the amount of free space and the number of available files in the cache + rises above both these limits, then culling is turned off. + + bcull, fcull + If the amount of available space or the number of available files in the + cache falls below either of these limits, then culling is started. + + bstop, fstop + If the amount of available space or the number of available files in the + cache falls below either of these limits, then no further allocation of + disk space or files is permitted until culling has raised things above + these limits again. + +These must be configured thusly:: + + 0 <= bstop < bcull < brun < 100 + 0 <= fstop < fcull < frun < 100 + +Note that these are percentages of available space and available files, and do +_not_ appear as 100 minus the percentage displayed by the "df" program. + +The userspace daemon scans the cache to build up a table of cullable objects. +These are then culled in least recently used order. A new scan of the cache is +started as soon as space is made in the table. Objects will be skipped if +their atimes have changed or if the kernel module says it is still using them. + + +Cache Structure +=============== + +The CacheFiles module will create two directories in the directory it was +given: + + * cache/ + * graveyard/ + +The active cache objects all reside in the first directory. The CacheFiles +kernel module moves any retired or culled objects that it can't simply unlink +to the graveyard from which the daemon will actually delete them. + +The daemon uses dnotify to monitor the graveyard directory, and will delete +anything that appears therein. + + +The module represents index objects as directories with the filename "I..." or +"J...". Note that the "cache/" directory is itself a special index. + +Data objects are represented as files if they have no children, or directories +if they do. Their filenames all begin "D..." or "E...". If represented as a +directory, data objects will have a file in the directory called "data" that +actually holds the data. + +Special objects are similar to data objects, except their filenames begin +"S..." or "T...". + + +If an object has children, then it will be represented as a directory. +Immediately in the representative directory are a collection of directories +named for hash values of the child object keys with an '@' prepended. Into +this directory, if possible, will be placed the representations of the child +objects:: + + /INDEX /INDEX /INDEX /DATA FILES + /=========/==========/=================================/================ + cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400 + cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...DB1ry + cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...N22ry + cache/@4a/I03nfs/@30/Ji000000000000000--fHg8hi8400/@75/Es0g000w...FP1ry + + +If the key is so long that it exceeds NAME_MAX with the decorations added on to +it, then it will be cut into pieces, the first few of which will be used to +make a nest of directories, and the last one of which will be the objects +inside the last directory. The names of the intermediate directories will have +'+' prepended:: + + J1223/@23/+xy...z/+kl...m/Epqr + + +Note that keys are raw data, and not only may they exceed NAME_MAX in size, +they may also contain things like '/' and NUL characters, and so they may not +be suitable for turning directly into a filename. + +To handle this, CacheFiles will use a suitably printable filename directly and +"base-64" encode ones that aren't directly suitable. The two versions of +object filenames indicate the encoding: + + =============== =============== =============== + OBJECT TYPE PRINTABLE ENCODED + =============== =============== =============== + Index "I..." "J..." + Data "D..." "E..." + Special "S..." "T..." + =============== =============== =============== + +Intermediate directories are always "@" or "+" as appropriate. + + +Each object in the cache has an extended attribute label that holds the object +type ID (required to distinguish special objects) and the auxiliary data from +the netfs. The latter is used to detect stale objects in the cache and update +or retire them. + + +Note that CacheFiles will erase from the cache any file it doesn't recognise or +any file of an incorrect type (such as a FIFO file or a device file). + + +Security Model and SELinux +========================== + +CacheFiles is implemented to deal properly with the LSM security features of +the Linux kernel and the SELinux facility. + +One of the problems that CacheFiles faces is that it is generally acting on +behalf of a process, and running in that process's context, and that includes a +security context that is not appropriate for accessing the cache - either +because the files in the cache are inaccessible to that process, or because if +the process creates a file in the cache, that file may be inaccessible to other +processes. + +The way CacheFiles works is to temporarily change the security context (fsuid, +fsgid and actor security label) that the process acts as - without changing the +security context of the process when it the target of an operation performed by +some other process (so signalling and suchlike still work correctly). + + +When the CacheFiles module is asked to bind to its cache, it: + + (1) Finds the security label attached to the root cache directory and uses + that as the security label with which it will create files. By default, + this is:: + + cachefiles_var_t + + (2) Finds the security label of the process which issued the bind request + (presumed to be the cachefilesd daemon), which by default will be:: + + cachefilesd_t + + and asks LSM to supply a security ID as which it should act given the + daemon's label. By default, this will be:: + + cachefiles_kernel_t + + SELinux transitions the daemon's security ID to the module's security ID + based on a rule of this form in the policy:: + + type_transition <daemon's-ID> kernel_t : process <module's-ID>; + + For instance:: + + type_transition cachefilesd_t kernel_t : process cachefiles_kernel_t; + + +The module's security ID gives it permission to create, move and remove files +and directories in the cache, to find and access directories and files in the +cache, to set and access extended attributes on cache objects, and to read and +write files in the cache. + +The daemon's security ID gives it only a very restricted set of permissions: it +may scan directories, stat files and erase files and directories. It may +not read or write files in the cache, and so it is precluded from accessing the +data cached therein; nor is it permitted to create new files in the cache. + + +There are policy source files available in: + + https://people.redhat.com/~dhowells/fscache/cachefilesd-0.8.tar.bz2 + +and later versions. In that tarball, see the files:: + + cachefilesd.te + cachefilesd.fc + cachefilesd.if + +They are built and installed directly by the RPM. + +If a non-RPM based system is being used, then copy the above files to their own +directory and run:: + + make -f /usr/share/selinux/devel/Makefile + semodule -i cachefilesd.pp + +You will need checkpolicy and selinux-policy-devel installed prior to the +build. + + +By default, the cache is located in /var/fscache, but if it is desirable that +it should be elsewhere, than either the above policy files must be altered, or +an auxiliary policy must be installed to label the alternate location of the +cache. + +For instructions on how to add an auxiliary policy to enable the cache to be +located elsewhere when SELinux is in enforcing mode, please see:: + + /usr/share/doc/cachefilesd-*/move-cache.txt + +When the cachefilesd rpm is installed; alternatively, the document can be found +in the sources. + + +A Note on Security +================== + +CacheFiles makes use of the split security in the task_struct. It allocates +its own task_security structure, and redirects current->cred to point to it +when it acts on behalf of another process, in that process's context. + +The reason it does this is that it calls vfs_mkdir() and suchlike rather than +bypassing security and calling inode ops directly. Therefore the VFS and LSM +may deny the CacheFiles access to the cache data because under some +circumstances the caching code is running in the security context of whatever +process issued the original syscall on the netfs. + +Furthermore, should CacheFiles create a file or directory, the security +parameters with that object is created (UID, GID, security label) would be +derived from that process that issued the system call, thus potentially +preventing other processes from accessing the cache - including CacheFiles's +cache management daemon (cachefilesd). + +What is required is to temporarily override the security of the process that +issued the system call. We can't, however, just do an in-place change of the +security data as that affects the process as an object, not just as a subject. +This means it may lose signals or ptrace events for example, and affects what +the process looks like in /proc. + +So CacheFiles makes use of a logical split in the security between the +objective security (task->real_cred) and the subjective security (task->cred). +The objective security holds the intrinsic security properties of a process and +is never overridden. This is what appears in /proc, and is what is used when a +process is the target of an operation by some other process (SIGKILL for +example). + +The subjective security holds the active security properties of a process, and +may be overridden. This is not seen externally, and is used whan a process +acts upon another object, for example SIGKILLing another process or opening a +file. + +LSM hooks exist that allow SELinux (or Smack or whatever) to reject a request +for CacheFiles to run in a context of a specific security label, or to create +files and directories with another security label. + + +Statistical Information +======================= + +If FS-Cache is compiled with the following option enabled:: + + CONFIG_CACHEFILES_HISTOGRAM=y + +then it will gather certain statistics and display them through a proc file. + + /proc/fs/cachefiles/histogram + + :: + + cat /proc/fs/cachefiles/histogram + JIFS SECS LOOKUPS MKDIRS CREATES + ===== ===== ========= ========= ========= + + This shows the breakdown of the number of times each amount of time + between 0 jiffies and HZ-1 jiffies a variety of tasks took to run. The + columns are as follows: + + ======= ======================================================= + COLUMN TIME MEASUREMENT + ======= ======================================================= + LOOKUPS Length of time to perform a lookup on the backing fs + MKDIRS Length of time to perform a mkdir on the backing fs + CREATES Length of time to perform a create on the backing fs + ======= ======================================================= + + Each row shows the number of events that took a particular range of times. + Each step is 1 jiffy in size. The JIFS column indicates the particular + jiffy range covered, and the SECS field the equivalent number of seconds. + + +Debugging +========= + +If CONFIG_CACHEFILES_DEBUG is enabled, the CacheFiles facility can have runtime +debugging enabled by adjusting the value in:: + + /sys/module/cachefiles/parameters/debug + +This is a bitmask of debugging streams to enable: + + ======= ======= =============================== ======================= + BIT VALUE STREAM POINT + ======= ======= =============================== ======================= + 0 1 General Function entry trace + 1 2 Function exit trace + 2 4 General + ======= ======= =============================== ======================= + +The appropriate set of values should be OR'd together and the result written to +the control file. For example:: + + echo $((1|4|8)) >/sys/module/cachefiles/parameters/debug + +will turn on all function entry debugging. diff --git a/Documentation/filesystems/caching/fscache.rst b/Documentation/filesystems/caching/fscache.rst new file mode 100644 index 000000000..70de86922 --- /dev/null +++ b/Documentation/filesystems/caching/fscache.rst @@ -0,0 +1,565 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================== +General Filesystem Caching +========================== + +Overview +======== + +This facility is a general purpose cache for network filesystems, though it +could be used for caching other things such as ISO9660 filesystems too. + +FS-Cache mediates between cache backends (such as CacheFS) and network +filesystems:: + + +---------+ + | | +--------------+ + | NFS |--+ | | + | | | +-->| CacheFS | + +---------+ | +----------+ | | /dev/hda5 | + | | | | +--------------+ + +---------+ +-->| | | + | | | |--+ + | AFS |----->| FS-Cache | + | | | |--+ + +---------+ +-->| | | + | | | | +--------------+ + +---------+ | +----------+ | | | + | | | +-->| CacheFiles | + | ISOFS |--+ | /var/cache | + | | +--------------+ + +---------+ + +Or to look at it another way, FS-Cache is a module that provides a caching +facility to a network filesystem such that the cache is transparent to the +user:: + + +---------+ + | | + | Server | + | | + +---------+ + | NETWORK + ~~~~~|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + | + | +----------+ + V | | + +---------+ | | + | | | | + | NFS |----->| FS-Cache | + | | | |--+ + +---------+ | | | +--------------+ +--------------+ + | | | | | | | | + V +----------+ +-->| CacheFiles |-->| Ext3 | + +---------+ | /var/cache | | /dev/sda6 | + | | +--------------+ +--------------+ + | VFS | ^ ^ + | | | | + +---------+ +--------------+ | + | KERNEL SPACE | | + ~~~~~|~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~|~~~~~~|~~~~ + | USER SPACE | | + V | | + +---------+ +--------------+ + | | | | + | Process | | cachefilesd | + | | | | + +---------+ +--------------+ + + +FS-Cache does not follow the idea of completely loading every netfs file +opened in its entirety into a cache before permitting it to be accessed and +then serving the pages out of that cache rather than the netfs inode because: + + (1) It must be practical to operate without a cache. + + (2) The size of any accessible file must not be limited to the size of the + cache. + + (3) The combined size of all opened files (this includes mapped libraries) + must not be limited to the size of the cache. + + (4) The user should not be forced to download an entire file just to do a + one-off access of a small portion of it (such as might be done with the + "file" program). + +It instead serves the cache out in PAGE_SIZE chunks as and when requested by +the netfs('s) using it. + + +FS-Cache provides the following facilities: + + (1) More than one cache can be used at once. Caches can be selected + explicitly by use of tags. + + (2) Caches can be added / removed at any time. + + (3) The netfs is provided with an interface that allows either party to + withdraw caching facilities from a file (required for (2)). + + (4) The interface to the netfs returns as few errors as possible, preferring + rather to let the netfs remain oblivious. + + (5) Cookies are used to represent indices, files and other objects to the + netfs. The simplest cookie is just a NULL pointer - indicating nothing + cached there. + + (6) The netfs is allowed to propose - dynamically - any index hierarchy it + desires, though it must be aware that the index search function is + recursive, stack space is limited, and indices can only be children of + indices. + + (7) Data I/O is done direct to and from the netfs's pages. The netfs + indicates that page A is at index B of the data-file represented by cookie + C, and that it should be read or written. The cache backend may or may + not start I/O on that page, but if it does, a netfs callback will be + invoked to indicate completion. The I/O may be either synchronous or + asynchronous. + + (8) Cookies can be "retired" upon release. At this point FS-Cache will mark + them as obsolete and the index hierarchy rooted at that point will get + recycled. + + (9) The netfs provides a "match" function for index searches. In addition to + saying whether a match was made or not, this can also specify that an + entry should be updated or deleted. + +(10) As much as possible is done asynchronously. + + +FS-Cache maintains a virtual indexing tree in which all indices, files, objects +and pages are kept. Bits of this tree may actually reside in one or more +caches:: + + FSDEF + | + +------------------------------------+ + | | + NFS AFS + | | + +--------------------------+ +-----------+ + | | | | + homedir mirror afs.org redhat.com + | | | + +------------+ +---------------+ +----------+ + | | | | | | + 00001 00002 00007 00125 vol00001 vol00002 + | | | | | + +---+---+ +-----+ +---+ +------+------+ +-----+----+ + | | | | | | | | | | | | | + PG0 PG1 PG2 PG0 XATTR PG0 PG1 DIRENT DIRENT DIRENT R/W R/O Bak + | | + PG0 +-------+ + | | + 00001 00003 + | + +---+---+ + | | | + PG0 PG1 PG2 + +In the example above, you can see two netfs's being backed: NFS and AFS. These +have different index hierarchies: + + * The NFS primary index contains per-server indices. Each server index is + indexed by NFS file handles to get data file objects. Each data file + objects can have an array of pages, but may also have further child + objects, such as extended attributes and directory entries. Extended + attribute objects themselves have page-array contents. + + * The AFS primary index contains per-cell indices. Each cell index contains + per-logical-volume indices. Each of volume index contains up to three + indices for the read-write, read-only and backup mirrors of those volumes. + Each of these contains vnode data file objects, each of which contains an + array of pages. + +The very top index is the FS-Cache master index in which individual netfs's +have entries. + +Any index object may reside in more than one cache, provided it only has index +children. Any index with non-index object children will be assumed to only +reside in one cache. + + +The netfs API to FS-Cache can be found in: + + Documentation/filesystems/caching/netfs-api.rst + +The cache backend API to FS-Cache can be found in: + + Documentation/filesystems/caching/backend-api.rst + +A description of the internal representations and object state machine can be +found in: + + Documentation/filesystems/caching/object.rst + + +Statistical Information +======================= + +If FS-Cache is compiled with the following options enabled:: + + CONFIG_FSCACHE_STATS=y + CONFIG_FSCACHE_HISTOGRAM=y + +then it will gather certain statistics and display them through a number of +proc files. + +/proc/fs/fscache/stats +---------------------- + + This shows counts of a number of events that can happen in FS-Cache: + ++--------------+-------+-------------------------------------------------------+ +|CLASS |EVENT |MEANING | ++==============+=======+=======================================================+ +|Cookies |idx=N |Number of index cookies allocated | ++ +-------+-------------------------------------------------------+ +| |dat=N |Number of data storage cookies allocated | ++ +-------+-------------------------------------------------------+ +| |spc=N |Number of special cookies allocated | ++--------------+-------+-------------------------------------------------------+ +|Objects |alc=N |Number of objects allocated | ++ +-------+-------------------------------------------------------+ +| |nal=N |Number of object allocation failures | ++ +-------+-------------------------------------------------------+ +| |avl=N |Number of objects that reached the available state | ++ +-------+-------------------------------------------------------+ +| |ded=N |Number of objects that reached the dead state | ++--------------+-------+-------------------------------------------------------+ +|ChkAux |non=N |Number of objects that didn't have a coherency check | ++ +-------+-------------------------------------------------------+ +| |ok=N |Number of objects that passed a coherency check | ++ +-------+-------------------------------------------------------+ +| |upd=N |Number of objects that needed a coherency data update | ++ +-------+-------------------------------------------------------+ +| |obs=N |Number of objects that were declared obsolete | ++--------------+-------+-------------------------------------------------------+ +|Pages |mrk=N |Number of pages marked as being cached | +| |unc=N |Number of uncache page requests seen | ++--------------+-------+-------------------------------------------------------+ +|Acquire |n=N |Number of acquire cookie requests seen | ++ +-------+-------------------------------------------------------+ +| |nul=N |Number of acq reqs given a NULL parent | ++ +-------+-------------------------------------------------------+ +| |noc=N |Number of acq reqs rejected due to no cache available | ++ +-------+-------------------------------------------------------+ +| |ok=N |Number of acq reqs succeeded | ++ +-------+-------------------------------------------------------+ +| |nbf=N |Number of acq reqs rejected due to error | ++ +-------+-------------------------------------------------------+ +| |oom=N |Number of acq reqs failed on ENOMEM | ++--------------+-------+-------------------------------------------------------+ +|Lookups |n=N |Number of lookup calls made on cache backends | ++ +-------+-------------------------------------------------------+ +| |neg=N |Number of negative lookups made | ++ +-------+-------------------------------------------------------+ +| |pos=N |Number of positive lookups made | ++ +-------+-------------------------------------------------------+ +| |crt=N |Number of objects created by lookup | ++ +-------+-------------------------------------------------------+ +| |tmo=N |Number of lookups timed out and requeued | ++--------------+-------+-------------------------------------------------------+ +|Updates |n=N |Number of update cookie requests seen | ++ +-------+-------------------------------------------------------+ +| |nul=N |Number of upd reqs given a NULL parent | ++ +-------+-------------------------------------------------------+ +| |run=N |Number of upd reqs granted CPU time | ++--------------+-------+-------------------------------------------------------+ +|Relinqs |n=N |Number of relinquish cookie requests seen | ++ +-------+-------------------------------------------------------+ +| |nul=N |Number of rlq reqs given a NULL parent | ++ +-------+-------------------------------------------------------+ +| |wcr=N |Number of rlq reqs waited on completion of creation | ++--------------+-------+-------------------------------------------------------+ +|AttrChg |n=N |Number of attribute changed requests seen | ++ +-------+-------------------------------------------------------+ +| |ok=N |Number of attr changed requests queued | ++ +-------+-------------------------------------------------------+ +| |nbf=N |Number of attr changed rejected -ENOBUFS | ++ +-------+-------------------------------------------------------+ +| |oom=N |Number of attr changed failed -ENOMEM | ++ +-------+-------------------------------------------------------+ +| |run=N |Number of attr changed ops given CPU time | ++--------------+-------+-------------------------------------------------------+ +|Allocs |n=N |Number of allocation requests seen | ++ +-------+-------------------------------------------------------+ +| |ok=N |Number of successful alloc reqs | ++ +-------+-------------------------------------------------------+ +| |wt=N |Number of alloc reqs that waited on lookup completion | ++ +-------+-------------------------------------------------------+ +| |nbf=N |Number of alloc reqs rejected -ENOBUFS | ++ +-------+-------------------------------------------------------+ +| |int=N |Number of alloc reqs aborted -ERESTARTSYS | ++ +-------+-------------------------------------------------------+ +| |ops=N |Number of alloc reqs submitted | ++ +-------+-------------------------------------------------------+ +| |owt=N |Number of alloc reqs waited for CPU time | ++ +-------+-------------------------------------------------------+ +| |abt=N |Number of alloc reqs aborted due to object death | ++--------------+-------+-------------------------------------------------------+ +|Retrvls |n=N |Number of retrieval (read) requests seen | ++ +-------+-------------------------------------------------------+ +| |ok=N |Number of successful retr reqs | ++ +-------+-------------------------------------------------------+ +| |wt=N |Number of retr reqs that waited on lookup completion | ++ +-------+-------------------------------------------------------+ +| |nod=N |Number of retr reqs returned -ENODATA | ++ +-------+-------------------------------------------------------+ +| |nbf=N |Number of retr reqs rejected -ENOBUFS | ++ +-------+-------------------------------------------------------+ +| |int=N |Number of retr reqs aborted -ERESTARTSYS | ++ +-------+-------------------------------------------------------+ +| |oom=N |Number of retr reqs failed -ENOMEM | ++ +-------+-------------------------------------------------------+ +| |ops=N |Number of retr reqs submitted | ++ +-------+-------------------------------------------------------+ +| |owt=N |Number of retr reqs waited for CPU time | ++ +-------+-------------------------------------------------------+ +| |abt=N |Number of retr reqs aborted due to object death | ++--------------+-------+-------------------------------------------------------+ +|Stores |n=N |Number of storage (write) requests seen | ++ +-------+-------------------------------------------------------+ +| |ok=N |Number of successful store reqs | ++ +-------+-------------------------------------------------------+ +| |agn=N |Number of store reqs on a page already pending storage | ++ +-------+-------------------------------------------------------+ +| |nbf=N |Number of store reqs rejected -ENOBUFS | ++ +-------+-------------------------------------------------------+ +| |oom=N |Number of store reqs failed -ENOMEM | ++ +-------+-------------------------------------------------------+ +| |ops=N |Number of store reqs submitted | ++ +-------+-------------------------------------------------------+ +| |run=N |Number of store reqs granted CPU time | ++ +-------+-------------------------------------------------------+ +| |pgs=N |Number of pages given store req processing time | ++ +-------+-------------------------------------------------------+ +| |rxd=N |Number of store reqs deleted from tracking tree | ++ +-------+-------------------------------------------------------+ +| |olm=N |Number of store reqs over store limit | ++--------------+-------+-------------------------------------------------------+ +|VmScan |nos=N |Number of release reqs against pages with no | +| | |pending store | ++ +-------+-------------------------------------------------------+ +| |gon=N |Number of release reqs against pages stored by | +| | |time lock granted | ++ +-------+-------------------------------------------------------+ +| |bsy=N |Number of release reqs ignored due to in-progress store| ++ +-------+-------------------------------------------------------+ +| |can=N |Number of page stores cancelled due to release req | ++--------------+-------+-------------------------------------------------------+ +|Ops |pend=N |Number of times async ops added to pending queues | ++ +-------+-------------------------------------------------------+ +| |run=N |Number of times async ops given CPU time | ++ +-------+-------------------------------------------------------+ +| |enq=N |Number of times async ops queued for processing | ++ +-------+-------------------------------------------------------+ +| |can=N |Number of async ops cancelled | ++ +-------+-------------------------------------------------------+ +| |rej=N |Number of async ops rejected due to object | +| | |lookup/create failure | ++ +-------+-------------------------------------------------------+ +| |ini=N |Number of async ops initialised | ++ +-------+-------------------------------------------------------+ +| |dfr=N |Number of async ops queued for deferred release | ++ +-------+-------------------------------------------------------+ +| |rel=N |Number of async ops released | +| | |(should equal ini=N when idle) | ++ +-------+-------------------------------------------------------+ +| |gc=N |Number of deferred-release async ops garbage collected | ++--------------+-------+-------------------------------------------------------+ +|CacheOp |alo=N |Number of in-progress alloc_object() cache ops | ++ +-------+-------------------------------------------------------+ +| |luo=N |Number of in-progress lookup_object() cache ops | ++ +-------+-------------------------------------------------------+ +| |luc=N |Number of in-progress lookup_complete() cache ops | ++ +-------+-------------------------------------------------------+ +| |gro=N |Number of in-progress grab_object() cache ops | ++ +-------+-------------------------------------------------------+ +| |upo=N |Number of in-progress update_object() cache ops | ++ +-------+-------------------------------------------------------+ +| |dro=N |Number of in-progress drop_object() cache ops | ++ +-------+-------------------------------------------------------+ +| |pto=N |Number of in-progress put_object() cache ops | ++ +-------+-------------------------------------------------------+ +| |syn=N |Number of in-progress sync_cache() cache ops | ++ +-------+-------------------------------------------------------+ +| |atc=N |Number of in-progress attr_changed() cache ops | ++ +-------+-------------------------------------------------------+ +| |rap=N |Number of in-progress read_or_alloc_page() cache ops | ++ +-------+-------------------------------------------------------+ +| |ras=N |Number of in-progress read_or_alloc_pages() cache ops | ++ +-------+-------------------------------------------------------+ +| |alp=N |Number of in-progress allocate_page() cache ops | ++ +-------+-------------------------------------------------------+ +| |als=N |Number of in-progress allocate_pages() cache ops | ++ +-------+-------------------------------------------------------+ +| |wrp=N |Number of in-progress write_page() cache ops | ++ +-------+-------------------------------------------------------+ +| |ucp=N |Number of in-progress uncache_page() cache ops | ++ +-------+-------------------------------------------------------+ +| |dsp=N |Number of in-progress dissociate_pages() cache ops | ++--------------+-------+-------------------------------------------------------+ +|CacheEv |nsp=N |Number of object lookups/creations rejected due to | +| | |lack of space | ++ +-------+-------------------------------------------------------+ +| |stl=N |Number of stale objects deleted | ++ +-------+-------------------------------------------------------+ +| |rtr=N |Number of objects retired when relinquished | ++ +-------+-------------------------------------------------------+ +| |cul=N |Number of objects culled | ++--------------+-------+-------------------------------------------------------+ + + + +/proc/fs/fscache/histogram +-------------------------- + + :: + + cat /proc/fs/fscache/histogram + JIFS SECS OBJ INST OP RUNS OBJ RUNS RETRV DLY RETRIEVLS + ===== ===== ========= ========= ========= ========= ========= + + This shows the breakdown of the number of times each amount of time + between 0 jiffies and HZ-1 jiffies a variety of tasks took to run. The + columns are as follows: + + ========= ======================================================= + COLUMN TIME MEASUREMENT + ========= ======================================================= + OBJ INST Length of time to instantiate an object + OP RUNS Length of time a call to process an operation took + OBJ RUNS Length of time a call to process an object event took + RETRV DLY Time between an requesting a read and lookup completing + RETRIEVLS Time between beginning and end of a retrieval + ========= ======================================================= + + Each row shows the number of events that took a particular range of times. + Each step is 1 jiffy in size. The JIFS column indicates the particular + jiffy range covered, and the SECS field the equivalent number of seconds. + + + +Object List +=========== + +If CONFIG_FSCACHE_OBJECT_LIST is enabled, the FS-Cache facility will maintain a +list of all the objects currently allocated and allow them to be viewed +through:: + + /proc/fs/fscache/objects + +This will look something like:: + + [root@andromeda ~]# head /proc/fs/fscache/objects + OBJECT PARENT STAT CHLDN OPS OOP IPR EX READS EM EV F S | NETFS_COOKIE_DEF TY FL NETFS_DATA OBJECT_KEY, AUX_DATA + ======== ======== ==== ===== === === === == ===== == == = = | ================ == == ================ ================ + 17e4b 2 ACTV 0 0 0 0 0 0 7b 4 0 0 | NFS.fh DT 0 ffff88001dd82820 010006017edcf8bbc93b43298fdfbe71e50b57b13a172c0117f38472, e567634700000000000000000000000063f2404a000000000000000000000000c9030000000000000000000063f2404a + 1693a 2 ACTV 0 0 0 0 0 0 7b 4 0 0 | NFS.fh DT 0 ffff88002db23380 010006017edcf8bbc93b43298fdfbe71e50b57b1e0162c01a2df0ea6, 420ebc4a000000000000000000000000420ebc4a0000000000000000000000000e1801000000000000000000420ebc4a + +where the first set of columns before the '|' describe the object: + + ======= =============================================================== + COLUMN DESCRIPTION + ======= =============================================================== + OBJECT Object debugging ID (appears as OBJ%x in some debug messages) + PARENT Debugging ID of parent object + STAT Object state + CHLDN Number of child objects of this object + OPS Number of outstanding operations on this object + OOP Number of outstanding child object management operations + IPR + EX Number of outstanding exclusive operations + READS Number of outstanding read operations + EM Object's event mask + EV Events raised on this object + F Object flags + S Object work item busy state mask (1:pending 2:running) + ======= =============================================================== + +and the second set of columns describe the object's cookie, if present: + + ================ ====================================================== + COLUMN DESCRIPTION + ================ ====================================================== + NETFS_COOKIE_DEF Name of netfs cookie definition + TY Cookie type (IX - index, DT - data, hex - special) + FL Cookie flags + NETFS_DATA Netfs private data stored in the cookie + OBJECT_KEY Object key } 1 column, with separating comma + AUX_DATA Object aux data } presence may be configured + ================ ====================================================== + +The data shown may be filtered by attaching the a key to an appropriate keyring +before viewing the file. Something like:: + + keyctl add user fscache:objlist <restrictions> @s + +where <restrictions> are a selection of the following letters: + + == ========================================================= + K Show hexdump of object key (don't show if not given) + A Show hexdump of object aux data (don't show if not given) + == ========================================================= + +and the following paired letters: + + == ========================================================= + C Show objects that have a cookie + c Show objects that don't have a cookie + B Show objects that are busy + b Show objects that aren't busy + W Show objects that have pending writes + w Show objects that don't have pending writes + R Show objects that have outstanding reads + r Show objects that don't have outstanding reads + S Show objects that have work queued + s Show objects that don't have work queued + == ========================================================= + +If neither side of a letter pair is given, then both are implied. For example: + + keyctl add user fscache:objlist KB @s + +shows objects that are busy, and lists their object keys, but does not dump +their auxiliary data. It also implies "CcWwRrSs", but as 'B' is given, 'b' is +not implied. + +By default all objects and all fields will be shown. + + +Debugging +========= + +If CONFIG_FSCACHE_DEBUG is enabled, the FS-Cache facility can have runtime +debugging enabled by adjusting the value in:: + + /sys/module/fscache/parameters/debug + +This is a bitmask of debugging streams to enable: + + ======= ======= =============================== ======================= + BIT VALUE STREAM POINT + ======= ======= =============================== ======================= + 0 1 Cache management Function entry trace + 1 2 Function exit trace + 2 4 General + 3 8 Cookie management Function entry trace + 4 16 Function exit trace + 5 32 General + 6 64 Page handling Function entry trace + 7 128 Function exit trace + 8 256 General + 9 512 Operation management Function entry trace + 10 1024 Function exit trace + 11 2048 General + ======= ======= =============================== ======================= + +The appropriate set of values should be OR'd together and the result written to +the control file. For example:: + + echo $((1|8|64)) >/sys/module/fscache/parameters/debug + +will turn on all function entry debugging. diff --git a/Documentation/filesystems/caching/index.rst b/Documentation/filesystems/caching/index.rst new file mode 100644 index 000000000..033da7ac7 --- /dev/null +++ b/Documentation/filesystems/caching/index.rst @@ -0,0 +1,14 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Filesystem Caching +================== + +.. toctree:: + :maxdepth: 2 + + fscache + object + backend-api + cachefiles + netfs-api + operations diff --git a/Documentation/filesystems/caching/netfs-api.rst b/Documentation/filesystems/caching/netfs-api.rst new file mode 100644 index 000000000..d9f14b861 --- /dev/null +++ b/Documentation/filesystems/caching/netfs-api.rst @@ -0,0 +1,896 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============================== +FS-Cache Network Filesystem API +=============================== + +There's an API by which a network filesystem can make use of the FS-Cache +facilities. This is based around a number of principles: + + (1) Caches can store a number of different object types. There are two main + object types: indices and files. The first is a special type used by + FS-Cache to make finding objects faster and to make retiring of groups of + objects easier. + + (2) Every index, file or other object is represented by a cookie. This cookie + may or may not have anything associated with it, but the netfs doesn't + need to care. + + (3) Barring the top-level index (one entry per cached netfs), the index + hierarchy for each netfs is structured according the whim of the netfs. + +This API is declared in <linux/fscache.h>. + +.. This document contains the following sections: + + (1) Network filesystem definition + (2) Index definition + (3) Object definition + (4) Network filesystem (un)registration + (5) Cache tag lookup + (6) Index registration + (7) Data file registration + (8) Miscellaneous object registration + (9) Setting the data file size + (10) Page alloc/read/write + (11) Page uncaching + (12) Index and data file consistency + (13) Cookie enablement + (14) Miscellaneous cookie operations + (15) Cookie unregistration + (16) Index invalidation + (17) Data file invalidation + (18) FS-Cache specific page flags. + + +Network Filesystem Definition +============================= + +FS-Cache needs a description of the network filesystem. This is specified +using a record of the following structure:: + + struct fscache_netfs { + uint32_t version; + const char *name; + struct fscache_cookie *primary_index; + ... + }; + +This first two fields should be filled in before registration, and the third +will be filled in by the registration function; any other fields should just be +ignored and are for internal use only. + +The fields are: + + (1) The name of the netfs (used as the key in the toplevel index). + + (2) The version of the netfs (if the name matches but the version doesn't, the + entire in-cache hierarchy for this netfs will be scrapped and begun + afresh). + + (3) The cookie representing the primary index will be allocated according to + another parameter passed into the registration function. + +For example, kAFS (linux/fs/afs/) uses the following definitions to describe +itself:: + + struct fscache_netfs afs_cache_netfs = { + .version = 0, + .name = "afs", + }; + + +Index Definition +================ + +Indices are used for two purposes: + + (1) To aid the finding of a file based on a series of keys (such as AFS's + "cell", "volume ID", "vnode ID"). + + (2) To make it easier to discard a subset of all the files cached based around + a particular key - for instance to mirror the removal of an AFS volume. + +However, since it's unlikely that any two netfs's are going to want to define +their index hierarchies in quite the same way, FS-Cache tries to impose as few +restraints as possible on how an index is structured and where it is placed in +the tree. The netfs can even mix indices and data files at the same level, but +it's not recommended. + +Each index entry consists of a key of indeterminate length plus some auxiliary +data, also of indeterminate length. + +There are some limits on indices: + + (1) Any index containing non-index objects should be restricted to a single + cache. Any such objects created within an index will be created in the + first cache only. The cache in which an index is created can be + controlled by cache tags (see below). + + (2) The entry data must be atomically journallable, so it is limited to about + 400 bytes at present. At least 400 bytes will be available. + + (3) The depth of the index tree should be judged with care as the search + function is recursive. Too many layers will run the kernel out of stack. + + +Object Definition +================= + +To define an object, a structure of the following type should be filled out:: + + struct fscache_cookie_def + { + uint8_t name[16]; + uint8_t type; + + struct fscache_cache_tag *(*select_cache)( + const void *parent_netfs_data, + const void *cookie_netfs_data); + + enum fscache_checkaux (*check_aux)(void *cookie_netfs_data, + const void *data, + uint16_t datalen, + loff_t object_size); + + void (*get_context)(void *cookie_netfs_data, void *context); + + void (*put_context)(void *cookie_netfs_data, void *context); + + void (*mark_pages_cached)(void *cookie_netfs_data, + struct address_space *mapping, + struct pagevec *cached_pvec); + }; + +This has the following fields: + + (1) The type of the object [mandatory]. + + This is one of the following values: + + FSCACHE_COOKIE_TYPE_INDEX + This defines an index, which is a special FS-Cache type. + + FSCACHE_COOKIE_TYPE_DATAFILE + This defines an ordinary data file. + + Any other value between 2 and 255 + This defines an extraordinary object such as an XATTR. + + (2) The name of the object type (NUL terminated unless all 16 chars are used) + [optional]. + + (3) A function to select the cache in which to store an index [optional]. + + This function is invoked when an index needs to be instantiated in a cache + during the instantiation of a non-index object. Only the immediate index + parent for the non-index object will be queried. Any indices above that + in the hierarchy may be stored in multiple caches. This function does not + need to be supplied for any non-index object or any index that will only + have index children. + + If this function is not supplied or if it returns NULL then the first + cache in the parent's list will be chosen, or failing that, the first + cache in the master list. + + (4) A function to check the auxiliary data [optional]. + + This function will be called to check that a match found in the cache for + this object is valid. For instance with AFS it could check the auxiliary + data against the data version number returned by the server to determine + whether the index entry in a cache is still valid. + + If this function is absent, it will be assumed that matching objects in a + cache are always valid. + + The function is also passed the cache's idea of the object size and may + use this to manage coherency also. + + If present, the function should return one of the following values: + + FSCACHE_CHECKAUX_OKAY + - the entry is okay as is + + FSCACHE_CHECKAUX_NEEDS_UPDATE + - the entry requires update + + FSCACHE_CHECKAUX_OBSOLETE + - the entry should be deleted + + This function can also be used to extract data from the auxiliary data in + the cache and copy it into the netfs's structures. + + (5) A pair of functions to manage contexts for the completion callback + [optional]. + + The cache read/write functions are passed a context which is then passed + to the I/O completion callback function. To ensure this context remains + valid until after the I/O completion is called, two functions may be + provided: one to get an extra reference on the context, and one to drop a + reference to it. + + If the context is not used or is a type of object that won't go out of + scope, then these functions are not required. These functions are not + required for indices as indices may not contain data. These functions may + be called in interrupt context and so may not sleep. + + (6) A function to mark a page as retaining cache metadata [optional]. + + This is called by the cache to indicate that it is retaining in-memory + information for this page and that the netfs should uncache the page when + it has finished. This does not indicate whether there's data on the disk + or not. Note that several pages at once may be presented for marking. + + The PG_fscache bit is set on the pages before this function would be + called, so the function need not be provided if this is sufficient. + + This function is not required for indices as they're not permitted data. + + (7) A function to unmark all the pages retaining cache metadata [mandatory]. + + This is called by FS-Cache to indicate that a backing store is being + unbound from a cookie and that all the marks on the pages should be + cleared to prevent confusion. Note that the cache will have torn down all + its tracking information so that the pages don't need to be explicitly + uncached. + + This function is not required for indices as they're not permitted data. + + +Network Filesystem (Un)registration +=================================== + +The first step is to declare the network filesystem to the cache. This also +involves specifying the layout of the primary index (for AFS, this would be the +"cell" level). + +The registration function is:: + + int fscache_register_netfs(struct fscache_netfs *netfs); + +It just takes a pointer to the netfs definition. It returns 0 or an error as +appropriate. + +For kAFS, registration is done as follows:: + + ret = fscache_register_netfs(&afs_cache_netfs); + +The last step is, of course, unregistration:: + + void fscache_unregister_netfs(struct fscache_netfs *netfs); + + +Cache Tag Lookup +================ + +FS-Cache permits the use of more than one cache. To permit particular index +subtrees to be bound to particular caches, the second step is to look up cache +representation tags. This step is optional; it can be left entirely up to +FS-Cache as to which cache should be used. The problem with doing that is that +FS-Cache will always pick the first cache that was registered. + +To get the representation for a named tag:: + + struct fscache_cache_tag *fscache_lookup_cache_tag(const char *name); + +This takes a text string as the name and returns a representation of a tag. It +will never return an error. It may return a dummy tag, however, if it runs out +of memory; this will inhibit caching with this tag. + +Any representation so obtained must be released by passing it to this function:: + + void fscache_release_cache_tag(struct fscache_cache_tag *tag); + +The tag will be retrieved by FS-Cache when it calls the object definition +operation select_cache(). + + +Index Registration +================== + +The third step is to inform FS-Cache about part of an index hierarchy that can +be used to locate files. This is done by requesting a cookie for each index in +the path to the file:: + + struct fscache_cookie * + fscache_acquire_cookie(struct fscache_cookie *parent, + const struct fscache_object_def *def, + const void *index_key, + size_t index_key_len, + const void *aux_data, + size_t aux_data_len, + void *netfs_data, + loff_t object_size, + bool enable); + +This function creates an index entry in the index represented by parent, +filling in the index entry by calling the operations pointed to by def. + +A unique key that represents the object within the parent must be pointed to by +index_key and is of length index_key_len. + +An optional blob of auxiliary data that is to be stored within the cache can be +pointed to with aux_data and should be of length aux_data_len. This would +typically be used for storing coherency data. + +The netfs may pass an arbitrary value in netfs_data and this will be presented +to it in the event of any calling back. This may also be used in tracing or +logging of messages. + +The cache tracks the size of the data attached to an object and this set to be +object_size. For indices, this should be 0. This value will be passed to the +->check_aux() callback. + +Note that this function never returns an error - all errors are handled +internally. It may, however, return NULL to indicate no cookie. It is quite +acceptable to pass this token back to this function as the parent to another +acquisition (or even to the relinquish cookie, read page and write page +functions - see below). + +Note also that no indices are actually created in a cache until a non-index +object needs to be created somewhere down the hierarchy. Furthermore, an index +may be created in several different caches independently at different times. +This is all handled transparently, and the netfs doesn't see any of it. + +A cookie will be created in the disabled state if enabled is false. A cookie +must be enabled to do anything with it. A disabled cookie can be enabled by +calling fscache_enable_cookie() (see below). + +For example, with AFS, a cell would be added to the primary index. This index +entry would have a dependent inode containing volume mappings within this cell:: + + cell->cache = + fscache_acquire_cookie(afs_cache_netfs.primary_index, + &afs_cell_cache_index_def, + cell->name, strlen(cell->name), + NULL, 0, + cell, 0, true); + +And then a particular volume could be added to that index by ID, creating +another index for vnodes (AFS inode equivalents):: + + volume->cache = + fscache_acquire_cookie(volume->cell->cache, + &afs_volume_cache_index_def, + &volume->vid, sizeof(volume->vid), + NULL, 0, + volume, 0, true); + + +Data File Registration +====================== + +The fourth step is to request a data file be created in the cache. This is +identical to index cookie acquisition. The only difference is that the type in +the object definition should be something other than index type:: + + vnode->cache = + fscache_acquire_cookie(volume->cache, + &afs_vnode_cache_object_def, + &key, sizeof(key), + &aux, sizeof(aux), + vnode, vnode->status.size, true); + + +Miscellaneous Object Registration +================================= + +An optional step is to request an object of miscellaneous type be created in +the cache. This is almost identical to index cookie acquisition. The only +difference is that the type in the object definition should be something other +than index type. While the parent object could be an index, it's more likely +it would be some other type of object such as a data file:: + + xattr->cache = + fscache_acquire_cookie(vnode->cache, + &afs_xattr_cache_object_def, + &xattr->name, strlen(xattr->name), + NULL, 0, + xattr, strlen(xattr->val), true); + +Miscellaneous objects might be used to store extended attributes or directory +entries for example. + + +Setting the Data File Size +========================== + +The fifth step is to set the physical attributes of the file, such as its size. +This doesn't automatically reserve any space in the cache, but permits the +cache to adjust its metadata for data tracking appropriately:: + + int fscache_attr_changed(struct fscache_cookie *cookie); + +The cache will return -ENOBUFS if there is no backing cache or if there is no +space to allocate any extra metadata required in the cache. + +Note that attempts to read or write data pages in the cache over this size may +be rebuffed with -ENOBUFS. + +This operation schedules an attribute adjustment to happen asynchronously at +some point in the future, and as such, it may happen after the function returns +to the caller. The attribute adjustment excludes read and write operations. + + +Page alloc/read/write +===================== + +And the sixth step is to store and retrieve pages in the cache. There are +three functions that are used to do this. + +Note: + + (1) A page should not be re-read or re-allocated without uncaching it first. + + (2) A read or allocated page must be uncached when the netfs page is released + from the pagecache. + + (3) A page should only be written to the cache if previous read or allocated. + +This permits the cache to maintain its page tracking in proper order. + + +PAGE READ +--------- + +Firstly, the netfs should ask FS-Cache to examine the caches and read the +contents cached for a particular page of a particular file if present, or else +allocate space to store the contents if not:: + + typedef + void (*fscache_rw_complete_t)(struct page *page, + void *context, + int error); + + int fscache_read_or_alloc_page(struct fscache_cookie *cookie, + struct page *page, + fscache_rw_complete_t end_io_func, + void *context, + gfp_t gfp); + +The cookie argument must specify a cookie for an object that isn't an index, +the page specified will have the data loaded into it (and is also used to +specify the page number), and the gfp argument is used to control how any +memory allocations made are satisfied. + +If the cookie indicates the inode is not cached: + + (1) The function will return -ENOBUFS. + +Else if there's a copy of the page resident in the cache: + + (1) The mark_pages_cached() cookie operation will be called on that page. + + (2) The function will submit a request to read the data from the cache's + backing device directly into the page specified. + + (3) The function will return 0. + + (4) When the read is complete, end_io_func() will be invoked with: + + * The netfs data supplied when the cookie was created. + + * The page descriptor. + + * The context argument passed to the above function. This will be + maintained with the get_context/put_context functions mentioned above. + + * An argument that's 0 on success or negative for an error code. + + If an error occurs, it should be assumed that the page contains no usable + data. fscache_readpages_cancel() may need to be called. + + end_io_func() will be called in process context if the read is results in + an error, but it might be called in interrupt context if the read is + successful. + +Otherwise, if there's not a copy available in cache, but the cache may be able +to store the page: + + (1) The mark_pages_cached() cookie operation will be called on that page. + + (2) A block may be reserved in the cache and attached to the object at the + appropriate place. + + (3) The function will return -ENODATA. + +This function may also return -ENOMEM or -EINTR, in which case it won't have +read any data from the cache. + + +Page Allocate +------------- + +Alternatively, if there's not expected to be any data in the cache for a page +because the file has been extended, a block can simply be allocated instead:: + + int fscache_alloc_page(struct fscache_cookie *cookie, + struct page *page, + gfp_t gfp); + +This is similar to the fscache_read_or_alloc_page() function, except that it +never reads from the cache. It will return 0 if a block has been allocated, +rather than -ENODATA as the other would. One or the other must be performed +before writing to the cache. + +The mark_pages_cached() cookie operation will be called on the page if +successful. + + +Page Write +---------- + +Secondly, if the netfs changes the contents of the page (either due to an +initial download or if a user performs a write), then the page should be +written back to the cache:: + + int fscache_write_page(struct fscache_cookie *cookie, + struct page *page, + loff_t object_size, + gfp_t gfp); + +The cookie argument must specify a data file cookie, the page specified should +contain the data to be written (and is also used to specify the page number), +object_size is the revised size of the object and the gfp argument is used to +control how any memory allocations made are satisfied. + +The page must have first been read or allocated successfully and must not have +been uncached before writing is performed. + +If the cookie indicates the inode is not cached then: + + (1) The function will return -ENOBUFS. + +Else if space can be allocated in the cache to hold this page: + + (1) PG_fscache_write will be set on the page. + + (2) The function will submit a request to write the data to cache's backing + device directly from the page specified. + + (3) The function will return 0. + + (4) When the write is complete PG_fscache_write is cleared on the page and + anyone waiting for that bit will be woken up. + +Else if there's no space available in the cache, -ENOBUFS will be returned. It +is also possible for the PG_fscache_write bit to be cleared when no write took +place if unforeseen circumstances arose (such as a disk error). + +Writing takes place asynchronously. + + +Multiple Page Read +------------------ + +A facility is provided to read several pages at once, as requested by the +readpages() address space operation:: + + int fscache_read_or_alloc_pages(struct fscache_cookie *cookie, + struct address_space *mapping, + struct list_head *pages, + int *nr_pages, + fscache_rw_complete_t end_io_func, + void *context, + gfp_t gfp); + +This works in a similar way to fscache_read_or_alloc_page(), except: + + (1) Any page it can retrieve data for is removed from pages and nr_pages and + dispatched for reading to the disk. Reads of adjacent pages on disk may + be merged for greater efficiency. + + (2) The mark_pages_cached() cookie operation will be called on several pages + at once if they're being read or allocated. + + (3) If there was an general error, then that error will be returned. + + Else if some pages couldn't be allocated or read, then -ENOBUFS will be + returned. + + Else if some pages couldn't be read but were allocated, then -ENODATA will + be returned. + + Otherwise, if all pages had reads dispatched, then 0 will be returned, the + list will be empty and ``*nr_pages`` will be 0. + + (4) end_io_func will be called once for each page being read as the reads + complete. It will be called in process context if error != 0, but it may + be called in interrupt context if there is no error. + +Note that a return of -ENODATA, -ENOBUFS or any other error does not preclude +some of the pages being read and some being allocated. Those pages will have +been marked appropriately and will need uncaching. + + +Cancellation of Unread Pages +---------------------------- + +If one or more pages are passed to fscache_read_or_alloc_pages() but not then +read from the cache and also not read from the underlying filesystem then +those pages will need to have any marks and reservations removed. This can be +done by calling:: + + void fscache_readpages_cancel(struct fscache_cookie *cookie, + struct list_head *pages); + +prior to returning to the caller. The cookie argument should be as passed to +fscache_read_or_alloc_pages(). Every page in the pages list will be examined +and any that have PG_fscache set will be uncached. + + +Page Uncaching +============== + +To uncache a page, this function should be called:: + + void fscache_uncache_page(struct fscache_cookie *cookie, + struct page *page); + +This function permits the cache to release any in-memory representation it +might be holding for this netfs page. This function must be called once for +each page on which the read or write page functions above have been called to +make sure the cache's in-memory tracking information gets torn down. + +Note that pages can't be explicitly deleted from the a data file. The whole +data file must be retired (see the relinquish cookie function below). + +Furthermore, note that this does not cancel the asynchronous read or write +operation started by the read/alloc and write functions, so the page +invalidation functions must use:: + + bool fscache_check_page_write(struct fscache_cookie *cookie, + struct page *page); + +to see if a page is being written to the cache, and:: + + void fscache_wait_on_page_write(struct fscache_cookie *cookie, + struct page *page); + +to wait for it to finish if it is. + + +When releasepage() is being implemented, a special FS-Cache function exists to +manage the heuristics of coping with vmscan trying to eject pages, which may +conflict with the cache trying to write pages to the cache (which may itself +need to allocate memory):: + + bool fscache_maybe_release_page(struct fscache_cookie *cookie, + struct page *page, + gfp_t gfp); + +This takes the netfs cookie, and the page and gfp arguments as supplied to +releasepage(). It will return false if the page cannot be released yet for +some reason and if it returns true, the page has been uncached and can now be +released. + +To make a page available for release, this function may wait for an outstanding +storage request to complete, or it may attempt to cancel the storage request - +in which case the page will not be stored in the cache this time. + + +Bulk Image Page Uncache +----------------------- + +A convenience routine is provided to perform an uncache on all the pages +attached to an inode. This assumes that the pages on the inode correspond on a +1:1 basis with the pages in the cache:: + + void fscache_uncache_all_inode_pages(struct fscache_cookie *cookie, + struct inode *inode); + +This takes the netfs cookie that the pages were cached with and the inode that +the pages are attached to. This function will wait for pages to finish being +written to the cache and for the cache to finish with the page generally. No +error is returned. + + +Index and Data File consistency +=============================== + +To find out whether auxiliary data for an object is up to data within the +cache, the following function can be called:: + + int fscache_check_consistency(struct fscache_cookie *cookie, + const void *aux_data); + +This will call back to the netfs to check whether the auxiliary data associated +with a cookie is correct; if aux_data is non-NULL, it will update the auxiliary +data buffer first. It returns 0 if it is and -ESTALE if it isn't; it may also +return -ENOMEM and -ERESTARTSYS. + +To request an update of the index data for an index or other object, the +following function should be called:: + + void fscache_update_cookie(struct fscache_cookie *cookie, + const void *aux_data); + +This function will update the cookie's auxiliary data buffer from aux_data if +that is non-NULL and then schedule this to be stored on disk. The update +method in the parent index definition will be called to transfer the data. + +Note that partial updates may happen automatically at other times, such as when +data blocks are added to a data file object. + + +Cookie Enablement +================= + +Cookies exist in one of two states: enabled and disabled. If a cookie is +disabled, it ignores all attempts to acquire child cookies; check, update or +invalidate its state; allocate, read or write backing pages - though it is +still possible to uncache pages and relinquish the cookie. + +The initial enablement state is set by fscache_acquire_cookie(), but the cookie +can be enabled or disabled later. To disable a cookie, call:: + + void fscache_disable_cookie(struct fscache_cookie *cookie, + const void *aux_data, + bool invalidate); + +If the cookie is not already disabled, this locks the cookie against other +enable and disable ops, marks the cookie as being disabled, discards or +invalidates any backing objects and waits for cessation of activity on any +associated object before unlocking the cookie. + +All possible failures are handled internally. The caller should consider +calling fscache_uncache_all_inode_pages() afterwards to make sure all page +markings are cleared up. + +Cookies can be enabled or reenabled with:: + + void fscache_enable_cookie(struct fscache_cookie *cookie, + const void *aux_data, + loff_t object_size, + bool (*can_enable)(void *data), + void *data) + +If the cookie is not already enabled, this locks the cookie against other +enable and disable ops, invokes can_enable() and, if the cookie is not an index +cookie, will begin the procedure of acquiring backing objects. + +The optional can_enable() function is passed the data argument and returns a +ruling as to whether or not enablement should actually be permitted to begin. + +All possible failures are handled internally. The cookie will only be marked +as enabled if provisional backing objects are allocated. + +The object's data size is updated from object_size and is passed to the +->check_aux() function. + +In both cases, the cookie's auxiliary data buffer is updated from aux_data if +that is non-NULL inside the enablement lock before proceeding. + + +Miscellaneous Cookie operations +=============================== + +There are a number of operations that can be used to control cookies: + + * Cookie pinning:: + + int fscache_pin_cookie(struct fscache_cookie *cookie); + void fscache_unpin_cookie(struct fscache_cookie *cookie); + + These operations permit data cookies to be pinned into the cache and to + have the pinning removed. They are not permitted on index cookies. + + The pinning function will return 0 if successful, -ENOBUFS in the cookie + isn't backed by a cache, -EOPNOTSUPP if the cache doesn't support pinning, + -ENOSPC if there isn't enough space to honour the operation, -ENOMEM or + -EIO if there's any other problem. + + * Data space reservation:: + + int fscache_reserve_space(struct fscache_cookie *cookie, loff_t size); + + This permits a netfs to request cache space be reserved to store up to the + given amount of a file. It is permitted to ask for more than the current + size of the file to allow for future file expansion. + + If size is given as zero then the reservation will be cancelled. + + The function will return 0 if successful, -ENOBUFS in the cookie isn't + backed by a cache, -EOPNOTSUPP if the cache doesn't support reservations, + -ENOSPC if there isn't enough space to honour the operation, -ENOMEM or + -EIO if there's any other problem. + + Note that this doesn't pin an object in a cache; it can still be culled to + make space if it's not in use. + + +Cookie Unregistration +===================== + +To get rid of a cookie, this function should be called:: + + void fscache_relinquish_cookie(struct fscache_cookie *cookie, + const void *aux_data, + bool retire); + +If retire is non-zero, then the object will be marked for recycling, and all +copies of it will be removed from all active caches in which it is present. +Not only that but all child objects will also be retired. + +If retire is zero, then the object may be available again when next the +acquisition function is called. Retirement here will overrule the pinning on a +cookie. + +The cookie's auxiliary data will be updated from aux_data if that is non-NULL +so that the cache can lazily update it on disk. + +One very important note - relinquish must NOT be called for a cookie unless all +the cookies for "child" indices, objects and pages have been relinquished +first. + + +Index Invalidation +================== + +There is no direct way to invalidate an index subtree. To do this, the caller +should relinquish and retire the cookie they have, and then acquire a new one. + + +Data File Invalidation +====================== + +Sometimes it will be necessary to invalidate an object that contains data. +Typically this will be necessary when the server tells the netfs of a foreign +change - at which point the netfs has to throw away all the state it had for an +inode and reload from the server. + +To indicate that a cache object should be invalidated, the following function +can be called:: + + void fscache_invalidate(struct fscache_cookie *cookie); + +This can be called with spinlocks held as it defers the work to a thread pool. +All extant storage, retrieval and attribute change ops at this point are +cancelled and discarded. Some future operations will be rejected until the +cache has had a chance to insert a barrier in the operations queue. After +that, operations will be queued again behind the invalidation operation. + +The invalidation operation will perform an attribute change operation and an +auxiliary data update operation as it is very likely these will have changed. + +Using the following function, the netfs can wait for the invalidation operation +to have reached a point at which it can start submitting ordinary operations +once again:: + + void fscache_wait_on_invalidate(struct fscache_cookie *cookie); + + +FS-cache Specific Page Flag +=========================== + +FS-Cache makes use of a page flag, PG_private_2, for its own purpose. This is +given the alternative name PG_fscache. + +PG_fscache is used to indicate that the page is known by the cache, and that +the cache must be informed if the page is going to go away. It's an indication +to the netfs that the cache has an interest in this page, where an interest may +be a pointer to it, resources allocated or reserved for it, or I/O in progress +upon it. + +The netfs can use this information in methods such as releasepage() to +determine whether it needs to uncache a page or update it. + +Furthermore, if this bit is set, releasepage() and invalidatepage() operations +will be called on a page to get rid of it, even if PG_private is not set. This +allows caching to attempted on a page before read_cache_pages() to be called +after fscache_read_or_alloc_pages() as the former will try and release pages it +was given under certain circumstances. + +This bit does not overlap with such as PG_private. This means that FS-Cache +can be used with a filesystem that uses the block buffering code. + +There are a number of operations defined on this flag:: + + int PageFsCache(struct page *page); + void SetPageFsCache(struct page *page) + void ClearPageFsCache(struct page *page) + int TestSetPageFsCache(struct page *page) + int TestClearPageFsCache(struct page *page) + +These functions are bit test, bit set, bit clear, bit test and set and bit +test and clear operations on PG_fscache. diff --git a/Documentation/filesystems/caching/object.rst b/Documentation/filesystems/caching/object.rst new file mode 100644 index 000000000..ce0e043cc --- /dev/null +++ b/Documentation/filesystems/caching/object.rst @@ -0,0 +1,313 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================================================== +In-Kernel Cache Object Representation and Management +==================================================== + +By: David Howells <dhowells@redhat.com> + +.. Contents: + + (*) Representation + + (*) Object management state machine. + + - Provision of cpu time. + - Locking simplification. + + (*) The set of states. + + (*) The set of events. + + +Representation +============== + +FS-Cache maintains an in-kernel representation of each object that a netfs is +currently interested in. Such objects are represented by the fscache_cookie +struct and are referred to as cookies. + +FS-Cache also maintains a separate in-kernel representation of the objects that +a cache backend is currently actively caching. Such objects are represented by +the fscache_object struct. The cache backends allocate these upon request, and +are expected to embed them in their own representations. These are referred to +as objects. + +There is a 1:N relationship between cookies and objects. A cookie may be +represented by multiple objects - an index may exist in more than one cache - +or even by no objects (it may not be cached). + +Furthermore, both cookies and objects are hierarchical. The two hierarchies +correspond, but the cookies tree is a superset of the union of the object trees +of multiple caches:: + + NETFS INDEX TREE : CACHE 1 : CACHE 2 + : : + : +-----------+ : + +----------->| IObject | : + +-----------+ | : +-----------+ : + | ICookie |-------+ : | : + +-----------+ | : | : +-----------+ + | +------------------------------>| IObject | + | : | : +-----------+ + | : V : | + | : +-----------+ : | + V +----------->| IObject | : | + +-----------+ | : +-----------+ : | + | ICookie |-------+ : | : V + +-----------+ | : | : +-----------+ + | +------------------------------>| IObject | + +-----+-----+ : | : +-----------+ + | | : | : | + V | : V : | + +-----------+ | : +-----------+ : | + | ICookie |------------------------->| IObject | : | + +-----------+ | : +-----------+ : | + | V : | : V + | +-----------+ : | : +-----------+ + | | ICookie |-------------------------------->| IObject | + | +-----------+ : | : +-----------+ + V | : V : | + +-----------+ | : +-----------+ : | + | DCookie |------------------------->| DObject | : | + +-----------+ | : +-----------+ : | + | : : | + +-------+-------+ : : | + | | : : | + V V : : V + +-----------+ +-----------+ : : +-----------+ + | DCookie | | DCookie |------------------------>| DObject | + +-----------+ +-----------+ : : +-----------+ + : : + +In the above illustration, ICookie and IObject represent indices and DCookie +and DObject represent data storage objects. Indices may have representation in +multiple caches, but currently, non-index objects may not. Objects of any type +may also be entirely unrepresented. + +As far as the netfs API goes, the netfs is only actually permitted to see +pointers to the cookies. The cookies themselves and any objects attached to +those cookies are hidden from it. + + +Object Management State Machine +=============================== + +Within FS-Cache, each active object is managed by its own individual state +machine. The state for an object is kept in the fscache_object struct, in +object->state. A cookie may point to a set of objects that are in different +states. + +Each state has an action associated with it that is invoked when the machine +wakes up in that state. There are four logical sets of states: + + (1) Preparation: states that wait for the parent objects to become ready. The + representations are hierarchical, and it is expected that an object must + be created or accessed with respect to its parent object. + + (2) Initialisation: states that perform lookups in the cache and validate + what's found and that create on disk any missing metadata. + + (3) Normal running: states that allow netfs operations on objects to proceed + and that update the state of objects. + + (4) Termination: states that detach objects from their netfs cookies, that + delete objects from disk, that handle disk and system errors and that free + up in-memory resources. + + +In most cases, transitioning between states is in response to signalled events. +When a state has finished processing, it will usually set the mask of events in +which it is interested (object->event_mask) and relinquish the worker thread. +Then when an event is raised (by calling fscache_raise_event()), if the event +is not masked, the object will be queued for processing (by calling +fscache_enqueue_object()). + + +Provision of CPU Time +--------------------- + +The work to be done by the various states was given CPU time by the threads of +the slow work facility. This was used in preference to the workqueue facility +because: + + (1) Threads may be completely occupied for very long periods of time by a + particular work item. These state actions may be doing sequences of + synchronous, journalled disk accesses (lookup, mkdir, create, setxattr, + getxattr, truncate, unlink, rmdir, rename). + + (2) Threads may do little actual work, but may rather spend a lot of time + sleeping on I/O. This means that single-threaded and 1-per-CPU-threaded + workqueues don't necessarily have the right numbers of threads. + + +Locking Simplification +---------------------- + +Because only one worker thread may be operating on any particular object's +state machine at once, this simplifies the locking, particularly with respect +to disconnecting the netfs's representation of a cache object (fscache_cookie) +from the cache backend's representation (fscache_object) - which may be +requested from either end. + + +The Set of States +================= + +The object state machine has a set of states that it can be in. There are +preparation states in which the object sets itself up and waits for its parent +object to transit to a state that allows access to its children: + + (1) State FSCACHE_OBJECT_INIT. + + Initialise the object and wait for the parent object to become active. In + the cache, it is expected that it will not be possible to look an object + up from the parent object, until that parent object itself has been looked + up. + +There are initialisation states in which the object sets itself up and accesses +disk for the object metadata: + + (2) State FSCACHE_OBJECT_LOOKING_UP. + + Look up the object on disk, using the parent as a starting point. + FS-Cache expects the cache backend to probe the cache to see whether this + object is represented there, and if it is, to see if it's valid (coherency + management). + + The cache should call fscache_object_lookup_negative() to indicate lookup + failure for whatever reason, and should call fscache_obtained_object() to + indicate success. + + At the completion of lookup, FS-Cache will let the netfs go ahead with + read operations, no matter whether the file is yet cached. If not yet + cached, read operations will be immediately rejected with ENODATA until + the first known page is uncached - as to that point there can be no data + to be read out of the cache for that file that isn't currently also held + in the pagecache. + + (3) State FSCACHE_OBJECT_CREATING. + + Create an object on disk, using the parent as a starting point. This + happens if the lookup failed to find the object, or if the object's + coherency data indicated what's on disk is out of date. In this state, + FS-Cache expects the cache to create + + The cache should call fscache_obtained_object() if creation completes + successfully, fscache_object_lookup_negative() otherwise. + + At the completion of creation, FS-Cache will start processing write + operations the netfs has queued for an object. If creation failed, the + write ops will be transparently discarded, and nothing recorded in the + cache. + +There are some normal running states in which the object spends its time +servicing netfs requests: + + (4) State FSCACHE_OBJECT_AVAILABLE. + + A transient state in which pending operations are started, child objects + are permitted to advance from FSCACHE_OBJECT_INIT state, and temporary + lookup data is freed. + + (5) State FSCACHE_OBJECT_ACTIVE. + + The normal running state. In this state, requests the netfs makes will be + passed on to the cache. + + (6) State FSCACHE_OBJECT_INVALIDATING. + + The object is undergoing invalidation. When the state comes here, it + discards all pending read, write and attribute change operations as it is + going to clear out the cache entirely and reinitialise it. It will then + continue to the FSCACHE_OBJECT_UPDATING state. + + (7) State FSCACHE_OBJECT_UPDATING. + + The state machine comes here to update the object in the cache from the + netfs's records. This involves updating the auxiliary data that is used + to maintain coherency. + +And there are terminal states in which an object cleans itself up, deallocates +memory and potentially deletes stuff from disk: + + (8) State FSCACHE_OBJECT_LC_DYING. + + The object comes here if it is dying because of a lookup or creation + error. This would be due to a disk error or system error of some sort. + Temporary data is cleaned up, and the parent is released. + + (9) State FSCACHE_OBJECT_DYING. + + The object comes here if it is dying due to an error, because its parent + cookie has been relinquished by the netfs or because the cache is being + withdrawn. + + Any child objects waiting on this one are given CPU time so that they too + can destroy themselves. This object waits for all its children to go away + before advancing to the next state. + +(10) State FSCACHE_OBJECT_ABORT_INIT. + + The object comes to this state if it was waiting on its parent in + FSCACHE_OBJECT_INIT, but its parent died. The object will destroy itself + so that the parent may proceed from the FSCACHE_OBJECT_DYING state. + +(11) State FSCACHE_OBJECT_RELEASING. +(12) State FSCACHE_OBJECT_RECYCLING. + + The object comes to one of these two states when dying once it is rid of + all its children, if it is dying because the netfs relinquished its + cookie. In the first state, the cached data is expected to persist, and + in the second it will be deleted. + +(13) State FSCACHE_OBJECT_WITHDRAWING. + + The object transits to this state if the cache decides it wants to + withdraw the object from service, perhaps to make space, but also due to + error or just because the whole cache is being withdrawn. + +(14) State FSCACHE_OBJECT_DEAD. + + The object transits to this state when the in-memory object record is + ready to be deleted. The object processor shouldn't ever see an object in + this state. + + +The Set of Events +----------------- + +There are a number of events that can be raised to an object state machine: + + FSCACHE_OBJECT_EV_UPDATE + The netfs requested that an object be updated. The state machine will ask + the cache backend to update the object, and the cache backend will ask the + netfs for details of the change through its cookie definition ops. + + FSCACHE_OBJECT_EV_CLEARED + This is signalled in two circumstances: + + (a) when an object's last child object is dropped and + + (b) when the last operation outstanding on an object is completed. + + This is used to proceed from the dying state. + + FSCACHE_OBJECT_EV_ERROR + This is signalled when an I/O error occurs during the processing of some + object. + + FSCACHE_OBJECT_EV_RELEASE, FSCACHE_OBJECT_EV_RETIRE + These are signalled when the netfs relinquishes a cookie it was using. + The event selected depends on whether the netfs asks for the backing + object to be retired (deleted) or retained. + + FSCACHE_OBJECT_EV_WITHDRAW + This is signalled when the cache backend wants to withdraw an object. + This means that the object will have to be detached from the netfs's + cookie. + +Because the withdrawing releasing/retiring events are all handled by the object +state machine, it doesn't matter if there's a collision with both ends trying +to sever the connection at the same time. The state machine can just pick +which one it wants to honour, and that effects the other. diff --git a/Documentation/filesystems/caching/operations.rst b/Documentation/filesystems/caching/operations.rst new file mode 100644 index 000000000..9983e1675 --- /dev/null +++ b/Documentation/filesystems/caching/operations.rst @@ -0,0 +1,210 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================================ +Asynchronous Operations Handling +================================ + +By: David Howells <dhowells@redhat.com> + +.. Contents: + + (*) Overview. + + (*) Operation record initialisation. + + (*) Parameters. + + (*) Procedure. + + (*) Asynchronous callback. + + +Overview +======== + +FS-Cache has an asynchronous operations handling facility that it uses for its +data storage and retrieval routines. Its operations are represented by +fscache_operation structs, though these are usually embedded into some other +structure. + +This facility is available to and expected to be used by the cache backends, +and FS-Cache will create operations and pass them off to the appropriate cache +backend for completion. + +To make use of this facility, <linux/fscache-cache.h> should be #included. + + +Operation Record Initialisation +=============================== + +An operation is recorded in an fscache_operation struct:: + + struct fscache_operation { + union { + struct work_struct fast_work; + struct slow_work slow_work; + }; + unsigned long flags; + fscache_operation_processor_t processor; + ... + }; + +Someone wanting to issue an operation should allocate something with this +struct embedded in it. They should initialise it by calling:: + + void fscache_operation_init(struct fscache_operation *op, + fscache_operation_release_t release); + +with the operation to be initialised and the release function to use. + +The op->flags parameter should be set to indicate the CPU time provision and +the exclusivity (see the Parameters section). + +The op->fast_work, op->slow_work and op->processor flags should be set as +appropriate for the CPU time provision (see the Parameters section). + +FSCACHE_OP_WAITING may be set in op->flags prior to each submission of the +operation and waited for afterwards. + + +Parameters +========== + +There are a number of parameters that can be set in the operation record's flag +parameter. There are three options for the provision of CPU time in these +operations: + + (1) The operation may be done synchronously (FSCACHE_OP_MYTHREAD). A thread + may decide it wants to handle an operation itself without deferring it to + another thread. + + This is, for example, used in read operations for calling readpages() on + the backing filesystem in CacheFiles. Although readpages() does an + asynchronous data fetch, the determination of whether pages exist is done + synchronously - and the netfs does not proceed until this has been + determined. + + If this option is to be used, FSCACHE_OP_WAITING must be set in op->flags + before submitting the operation, and the operating thread must wait for it + to be cleared before proceeding:: + + wait_on_bit(&op->flags, FSCACHE_OP_WAITING, + TASK_UNINTERRUPTIBLE); + + + (2) The operation may be fast asynchronous (FSCACHE_OP_FAST), in which case it + will be given to keventd to process. Such an operation is not permitted + to sleep on I/O. + + This is, for example, used by CacheFiles to copy data from a backing fs + page to a netfs page after the backing fs has read the page in. + + If this option is used, op->fast_work and op->processor must be + initialised before submitting the operation:: + + INIT_WORK(&op->fast_work, do_some_work); + + + (3) The operation may be slow asynchronous (FSCACHE_OP_SLOW), in which case it + will be given to the slow work facility to process. Such an operation is + permitted to sleep on I/O. + + This is, for example, used by FS-Cache to handle background writes of + pages that have just been fetched from a remote server. + + If this option is used, op->slow_work and op->processor must be + initialised before submitting the operation:: + + fscache_operation_init_slow(op, processor) + + +Furthermore, operations may be one of two types: + + (1) Exclusive (FSCACHE_OP_EXCLUSIVE). Operations of this type may not run in + conjunction with any other operation on the object being operated upon. + + An example of this is the attribute change operation, in which the file + being written to may need truncation. + + (2) Shareable. Operations of this type may be running simultaneously. It's + up to the operation implementation to prevent interference between other + operations running at the same time. + + +Procedure +========= + +Operations are used through the following procedure: + + (1) The submitting thread must allocate the operation and initialise it + itself. Normally this would be part of a more specific structure with the + generic op embedded within. + + (2) The submitting thread must then submit the operation for processing using + one of the following two functions:: + + int fscache_submit_op(struct fscache_object *object, + struct fscache_operation *op); + + int fscache_submit_exclusive_op(struct fscache_object *object, + struct fscache_operation *op); + + The first function should be used to submit non-exclusive ops and the + second to submit exclusive ones. The caller must still set the + FSCACHE_OP_EXCLUSIVE flag. + + If successful, both functions will assign the operation to the specified + object and return 0. -ENOBUFS will be returned if the object specified is + permanently unavailable. + + The operation manager will defer operations on an object that is still + undergoing lookup or creation. The operation will also be deferred if an + operation of conflicting exclusivity is in progress on the object. + + If the operation is asynchronous, the manager will retain a reference to + it, so the caller should put their reference to it by passing it to:: + + void fscache_put_operation(struct fscache_operation *op); + + (3) If the submitting thread wants to do the work itself, and has marked the + operation with FSCACHE_OP_MYTHREAD, then it should monitor + FSCACHE_OP_WAITING as described above and check the state of the object if + necessary (the object might have died while the thread was waiting). + + When it has finished doing its processing, it should call + fscache_op_complete() and fscache_put_operation() on it. + + (4) The operation holds an effective lock upon the object, preventing other + exclusive ops conflicting until it is released. The operation can be + enqueued for further immediate asynchronous processing by adjusting the + CPU time provisioning option if necessary, eg:: + + op->flags &= ~FSCACHE_OP_TYPE; + op->flags |= ~FSCACHE_OP_FAST; + + and calling:: + + void fscache_enqueue_operation(struct fscache_operation *op) + + This can be used to allow other things to have use of the worker thread + pools. + + +Asynchronous Callback +===================== + +When used in asynchronous mode, the worker thread pool will invoke the +processor method with a pointer to the operation. This should then get at the +container struct by using container_of():: + + static void fscache_write_op(struct fscache_operation *_op) + { + struct fscache_storage *op = + container_of(_op, struct fscache_storage, op); + ... + } + +The caller holds a reference on the operation, and will invoke +fscache_put_operation() when the processor function returns. The processor +function is at liberty to call fscache_enqueue_operation() or to take extra +references. diff --git a/Documentation/filesystems/ceph.rst b/Documentation/filesystems/ceph.rst new file mode 100644 index 000000000..7d2ef4e27 --- /dev/null +++ b/Documentation/filesystems/ceph.rst @@ -0,0 +1,190 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================ +Ceph Distributed File System +============================ + +Ceph is a distributed network file system designed to provide good +performance, reliability, and scalability. + +Basic features include: + + * POSIX semantics + * Seamless scaling from 1 to many thousands of nodes + * High availability and reliability. No single point of failure. + * N-way replication of data across storage nodes + * Fast recovery from node failures + * Automatic rebalancing of data on node addition/removal + * Easy deployment: most FS components are userspace daemons + +Also, + + * Flexible snapshots (on any directory) + * Recursive accounting (nested files, directories, bytes) + +In contrast to cluster filesystems like GFS, OCFS2, and GPFS that rely +on symmetric access by all clients to shared block devices, Ceph +separates data and metadata management into independent server +clusters, similar to Lustre. Unlike Lustre, however, metadata and +storage nodes run entirely as user space daemons. File data is striped +across storage nodes in large chunks to distribute workload and +facilitate high throughputs. When storage nodes fail, data is +re-replicated in a distributed fashion by the storage nodes themselves +(with some minimal coordination from a cluster monitor), making the +system extremely efficient and scalable. + +Metadata servers effectively form a large, consistent, distributed +in-memory cache above the file namespace that is extremely scalable, +dynamically redistributes metadata in response to workload changes, +and can tolerate arbitrary (well, non-Byzantine) node failures. The +metadata server takes a somewhat unconventional approach to metadata +storage to significantly improve performance for common workloads. In +particular, inodes with only a single link are embedded in +directories, allowing entire directories of dentries and inodes to be +loaded into its cache with a single I/O operation. The contents of +extremely large directories can be fragmented and managed by +independent metadata servers, allowing scalable concurrent access. + +The system offers automatic data rebalancing/migration when scaling +from a small cluster of just a few nodes to many hundreds, without +requiring an administrator carve the data set into static volumes or +go through the tedious process of migrating data between servers. +When the file system approaches full, new nodes can be easily added +and things will "just work." + +Ceph includes flexible snapshot mechanism that allows a user to create +a snapshot on any subdirectory (and its nested contents) in the +system. Snapshot creation and deletion are as simple as 'mkdir +.snap/foo' and 'rmdir .snap/foo'. + +Ceph also provides some recursive accounting on directories for nested +files and bytes. That is, a 'getfattr -d foo' on any directory in the +system will reveal the total number of nested regular files and +subdirectories, and a summation of all nested file sizes. This makes +the identification of large disk space consumers relatively quick, as +no 'du' or similar recursive scan of the file system is required. + +Finally, Ceph also allows quotas to be set on any directory in the system. +The quota can restrict the number of bytes or the number of files stored +beneath that point in the directory hierarchy. Quotas can be set using +extended attributes 'ceph.quota.max_files' and 'ceph.quota.max_bytes', eg:: + + setfattr -n ceph.quota.max_bytes -v 100000000 /some/dir + getfattr -n ceph.quota.max_bytes /some/dir + +A limitation of the current quotas implementation is that it relies on the +cooperation of the client mounting the file system to stop writers when a +limit is reached. A modified or adversarial client cannot be prevented +from writing as much data as it needs. + +Mount Syntax +============ + +The basic mount syntax is:: + + # mount -t ceph monip[:port][,monip2[:port]...]:/[subdir] mnt + +You only need to specify a single monitor, as the client will get the +full list when it connects. (However, if the monitor you specify +happens to be down, the mount won't succeed.) The port can be left +off if the monitor is using the default. So if the monitor is at +1.2.3.4:: + + # mount -t ceph 1.2.3.4:/ /mnt/ceph + +is sufficient. If /sbin/mount.ceph is installed, a hostname can be +used instead of an IP address. + + + +Mount Options +============= + + ip=A.B.C.D[:N] + Specify the IP and/or port the client should bind to locally. + There is normally not much reason to do this. If the IP is not + specified, the client's IP address is determined by looking at the + address its connection to the monitor originates from. + + wsize=X + Specify the maximum write size in bytes. Default: 64 MB. + + rsize=X + Specify the maximum read size in bytes. Default: 64 MB. + + rasize=X + Specify the maximum readahead size in bytes. Default: 8 MB. + + mount_timeout=X + Specify the timeout value for mount (in seconds), in the case + of a non-responsive Ceph file system. The default is 60 + seconds. + + caps_max=X + Specify the maximum number of caps to hold. Unused caps are released + when number of caps exceeds the limit. The default is 0 (no limit) + + rbytes + When stat() is called on a directory, set st_size to 'rbytes', + the summation of file sizes over all files nested beneath that + directory. This is the default. + + norbytes + When stat() is called on a directory, set st_size to the + number of entries in that directory. + + nocrc + Disable CRC32C calculation for data writes. If set, the storage node + must rely on TCP's error correction to detect data corruption + in the data payload. + + dcache + Use the dcache contents to perform negative lookups and + readdir when the client has the entire directory contents in + its cache. (This does not change correctness; the client uses + cached metadata only when a lease or capability ensures it is + valid.) + + nodcache + Do not use the dcache as above. This avoids a significant amount of + complex code, sacrificing performance without affecting correctness, + and is useful for tracking down bugs. + + noasyncreaddir + Do not use the dcache as above for readdir. + + noquotadf + Report overall filesystem usage in statfs instead of using the root + directory quota. + + nocopyfrom + Don't use the RADOS 'copy-from' operation to perform remote object + copies. Currently, it's only used in copy_file_range, which will revert + to the default VFS implementation if this option is used. + + recover_session=<no|clean> + Set auto reconnect mode in the case where the client is blocklisted. The + available modes are "no" and "clean". The default is "no". + + * no: never attempt to reconnect when client detects that it has been + blocklisted. Operations will generally fail after being blocklisted. + + * clean: client reconnects to the ceph cluster automatically when it + detects that it has been blocklisted. During reconnect, client drops + dirty data/metadata, invalidates page caches and writable file handles. + After reconnect, file locks become stale because the MDS loses track + of them. If an inode contains any stale file locks, read/write on the + inode is not allowed until applications release all stale file locks. + +More Information +================ + +For more information on Ceph, see the home page at + https://ceph.com/ + +The Linux kernel client source tree is available at + - https://github.com/ceph/ceph-client.git + - git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git + +and the source for the full system is at + https://github.com/ceph/ceph.git diff --git a/Documentation/filesystems/cifs/cifsroot.rst b/Documentation/filesystems/cifs/cifsroot.rst new file mode 100644 index 000000000..4930bb443 --- /dev/null +++ b/Documentation/filesystems/cifs/cifsroot.rst @@ -0,0 +1,105 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=========================================== +Mounting root file system via SMB (cifs.ko) +=========================================== + +Written 2019 by Paulo Alcantara <palcantara@suse.de> + +Written 2019 by Aurelien Aptel <aaptel@suse.com> + +The CONFIG_CIFS_ROOT option enables experimental root file system +support over the SMB protocol via cifs.ko. + +It introduces a new kernel command-line option called 'cifsroot=' +which will tell the kernel to mount the root file system over the +network by utilizing SMB or CIFS protocol. + +In order to mount, the network stack will also need to be set up by +using 'ip=' config option. For more details, see +Documentation/admin-guide/nfs/nfsroot.rst. + +A CIFS root mount currently requires the use of SMB1+UNIX Extensions +which is only supported by the Samba server. SMB1 is the older +deprecated version of the protocol but it has been extended to support +POSIX features (See [1]). The equivalent extensions for the newer +recommended version of the protocol (SMB3) have not been fully +implemented yet which means SMB3 doesn't support some required POSIX +file system objects (e.g. block devices, pipes, sockets). + +As a result, a CIFS root will default to SMB1 for now but the version +to use can nonetheless be changed via the 'vers=' mount option. This +default will change once the SMB3 POSIX extensions are fully +implemented. + +Server configuration +==================== + +To enable SMB1+UNIX extensions you will need to set these global +settings in Samba smb.conf:: + + [global] + server min protocol = NT1 + unix extension = yes # default + +Kernel command line +=================== + +:: + + root=/dev/cifs + +This is just a virtual device that basically tells the kernel to mount +the root file system via SMB protocol. + +:: + + cifsroot=//<server-ip>/<share>[,options] + +Enables the kernel to mount the root file system via SMB that are +located in the <server-ip> and <share> specified in this option. + +The default mount options are set in fs/cifs/cifsroot.c. + +server-ip + IPv4 address of the server. + +share + Path to SMB share (rootfs). + +options + Optional mount options. For more information, see mount.cifs(8). + +Examples +======== + +Export root file system as a Samba share in smb.conf file:: + + ... + [linux] + path = /path/to/rootfs + read only = no + guest ok = yes + force user = root + force group = root + browseable = yes + writeable = yes + admin users = root + public = yes + create mask = 0777 + directory mask = 0777 + ... + +Restart smb service:: + + # systemctl restart smb + +Test it under QEMU on a kernel built with CONFIG_CIFS_ROOT and +CONFIG_IP_PNP options enabled:: + + # qemu-system-x86_64 -enable-kvm -cpu host -m 1024 \ + -kernel /path/to/linux/arch/x86/boot/bzImage -nographic \ + -append "root=/dev/cifs rw ip=dhcp cifsroot=//10.0.2.2/linux,username=foo,password=bar console=ttyS0 3" + + +1: https://wiki.samba.org/index.php/UNIX_Extensions diff --git a/Documentation/filesystems/coda.rst b/Documentation/filesystems/coda.rst new file mode 100644 index 000000000..bdde7e4e0 --- /dev/null +++ b/Documentation/filesystems/coda.rst @@ -0,0 +1,1670 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=========================== +Coda Kernel-Venus Interface +=========================== + +.. Note:: + + This is one of the technical documents describing a component of + Coda -- this document describes the client kernel-Venus interface. + +For more information: + + http://www.coda.cs.cmu.edu + +For user level software needed to run Coda: + + ftp://ftp.coda.cs.cmu.edu + +To run Coda you need to get a user level cache manager for the client, +named Venus, as well as tools to manipulate ACLs, to log in, etc. The +client needs to have the Coda filesystem selected in the kernel +configuration. + +The server needs a user level server and at present does not depend on +kernel support. + + The Venus kernel interface + + Peter J. Braam + + v1.0, Nov 9, 1997 + + This document describes the communication between Venus and kernel + level filesystem code needed for the operation of the Coda file sys- + tem. This document version is meant to describe the current interface + (version 1.0) as well as improvements we envisage. + +.. Table of Contents + + 1. Introduction + + 2. Servicing Coda filesystem calls + + 3. The message layer + + 3.1 Implementation details + + 4. The interface at the call level + + 4.1 Data structures shared by the kernel and Venus + 4.2 The pioctl interface + 4.3 root + 4.4 lookup + 4.5 getattr + 4.6 setattr + 4.7 access + 4.8 create + 4.9 mkdir + 4.10 link + 4.11 symlink + 4.12 remove + 4.13 rmdir + 4.14 readlink + 4.15 open + 4.16 close + 4.17 ioctl + 4.18 rename + 4.19 readdir + 4.20 vget + 4.21 fsync + 4.22 inactive + 4.23 rdwr + 4.24 odymount + 4.25 ody_lookup + 4.26 ody_expand + 4.27 prefetch + 4.28 signal + + 5. The minicache and downcalls + + 5.1 INVALIDATE + 5.2 FLUSH + 5.3 PURGEUSER + 5.4 ZAPFILE + 5.5 ZAPDIR + 5.6 ZAPVNODE + 5.7 PURGEFID + 5.8 REPLACE + + 6. Initialization and cleanup + + 6.1 Requirements + +1. Introduction +=============== + + A key component in the Coda Distributed File System is the cache + manager, Venus. + + When processes on a Coda enabled system access files in the Coda + filesystem, requests are directed at the filesystem layer in the + operating system. The operating system will communicate with Venus to + service the request for the process. Venus manages a persistent + client cache and makes remote procedure calls to Coda file servers and + related servers (such as authentication servers) to service these + requests it receives from the operating system. When Venus has + serviced a request it replies to the operating system with appropriate + return codes, and other data related to the request. Optionally the + kernel support for Coda may maintain a minicache of recently processed + requests to limit the number of interactions with Venus. Venus + possesses the facility to inform the kernel when elements from its + minicache are no longer valid. + + This document describes precisely this communication between the + kernel and Venus. The definitions of so called upcalls and downcalls + will be given with the format of the data they handle. We shall also + describe the semantic invariants resulting from the calls. + + Historically Coda was implemented in a BSD file system in Mach 2.6. + The interface between the kernel and Venus is very similar to the BSD + VFS interface. Similar functionality is provided, and the format of + the parameters and returned data is very similar to the BSD VFS. This + leads to an almost natural environment for implementing a kernel-level + filesystem driver for Coda in a BSD system. However, other operating + systems such as Linux and Windows 95 and NT have virtual filesystem + with different interfaces. + + To implement Coda on these systems some reverse engineering of the + Venus/Kernel protocol is necessary. Also it came to light that other + systems could profit significantly from certain small optimizations + and modifications to the protocol. To facilitate this work as well as + to make future ports easier, communication between Venus and the + kernel should be documented in great detail. This is the aim of this + document. + +2. Servicing Coda filesystem calls +=================================== + + The service of a request for a Coda file system service originates in + a process P which accessing a Coda file. It makes a system call which + traps to the OS kernel. Examples of such calls trapping to the kernel + are ``read``, ``write``, ``open``, ``close``, ``create``, ``mkdir``, + ``rmdir``, ``chmod`` in a Unix ontext. Similar calls exist in the Win32 + environment, and are named ``CreateFile``. + + Generally the operating system handles the request in a virtual + filesystem (VFS) layer, which is named I/O Manager in NT and IFS + manager in Windows 95. The VFS is responsible for partial processing + of the request and for locating the specific filesystem(s) which will + service parts of the request. Usually the information in the path + assists in locating the correct FS drivers. Sometimes after extensive + pre-processing, the VFS starts invoking exported routines in the FS + driver. This is the point where the FS specific processing of the + request starts, and here the Coda specific kernel code comes into + play. + + The FS layer for Coda must expose and implement several interfaces. + First and foremost the VFS must be able to make all necessary calls to + the Coda FS layer, so the Coda FS driver must expose the VFS interface + as applicable in the operating system. These differ very significantly + among operating systems, but share features such as facilities to + read/write and create and remove objects. The Coda FS layer services + such VFS requests by invoking one or more well defined services + offered by the cache manager Venus. When the replies from Venus have + come back to the FS driver, servicing of the VFS call continues and + finishes with a reply to the kernel's VFS. Finally the VFS layer + returns to the process. + + As a result of this design a basic interface exposed by the FS driver + must allow Venus to manage message traffic. In particular Venus must + be able to retrieve and place messages and to be notified of the + arrival of a new message. The notification must be through a mechanism + which does not block Venus since Venus must attend to other tasks even + when no messages are waiting or being processed. + + **Interfaces of the Coda FS Driver** + + Furthermore the FS layer provides for a special path of communication + between a user process and Venus, called the pioctl interface. The + pioctl interface is used for Coda specific services, such as + requesting detailed information about the persistent cache managed by + Venus. Here the involvement of the kernel is minimal. It identifies + the calling process and passes the information on to Venus. When + Venus replies the response is passed back to the caller in unmodified + form. + + Finally Venus allows the kernel FS driver to cache the results from + certain services. This is done to avoid excessive context switches + and results in an efficient system. However, Venus may acquire + information, for example from the network which implies that cached + information must be flushed or replaced. Venus then makes a downcall + to the Coda FS layer to request flushes or updates in the cache. The + kernel FS driver handles such requests synchronously. + + Among these interfaces the VFS interface and the facility to place, + receive and be notified of messages are platform specific. We will + not go into the calls exported to the VFS layer but we will state the + requirements of the message exchange mechanism. + + +3. The message layer +===================== + + At the lowest level the communication between Venus and the FS driver + proceeds through messages. The synchronization between processes + requesting Coda file service and Venus relies on blocking and waking + up processes. The Coda FS driver processes VFS- and pioctl-requests + on behalf of a process P, creates messages for Venus, awaits replies + and finally returns to the caller. The implementation of the exchange + of messages is platform specific, but the semantics have (so far) + appeared to be generally applicable. Data buffers are created by the + FS Driver in kernel memory on behalf of P and copied to user memory in + Venus. + + The FS Driver while servicing P makes upcalls to Venus. Such an + upcall is dispatched to Venus by creating a message structure. The + structure contains the identification of P, the message sequence + number, the size of the request and a pointer to the data in kernel + memory for the request. Since the data buffer is re-used to hold the + reply from Venus, there is a field for the size of the reply. A flags + field is used in the message to precisely record the status of the + message. Additional platform dependent structures involve pointers to + determine the position of the message on queues and pointers to + synchronization objects. In the upcall routine the message structure + is filled in, flags are set to 0, and it is placed on the *pending* + queue. The routine calling upcall is responsible for allocating the + data buffer; its structure will be described in the next section. + + A facility must exist to notify Venus that the message has been + created, and implemented using available synchronization objects in + the OS. This notification is done in the upcall context of the process + P. When the message is on the pending queue, process P cannot proceed + in upcall. The (kernel mode) processing of P in the filesystem + request routine must be suspended until Venus has replied. Therefore + the calling thread in P is blocked in upcall. A pointer in the + message structure will locate the synchronization object on which P is + sleeping. + + Venus detects the notification that a message has arrived, and the FS + driver allow Venus to retrieve the message with a getmsg_from_kernel + call. This action finishes in the kernel by putting the message on the + queue of processing messages and setting flags to READ. Venus is + passed the contents of the data buffer. The getmsg_from_kernel call + now returns and Venus processes the request. + + At some later point the FS driver receives a message from Venus, + namely when Venus calls sendmsg_to_kernel. At this moment the Coda FS + driver looks at the contents of the message and decides if: + + + * the message is a reply for a suspended thread P. If so it removes + the message from the processing queue and marks the message as + WRITTEN. Finally, the FS driver unblocks P (still in the kernel + mode context of Venus) and the sendmsg_to_kernel call returns to + Venus. The process P will be scheduled at some point and continues + processing its upcall with the data buffer replaced with the reply + from Venus. + + * The message is a ``downcall``. A downcall is a request from Venus to + the FS Driver. The FS driver processes the request immediately + (usually a cache eviction or replacement) and when it finishes + sendmsg_to_kernel returns. + + Now P awakes and continues processing upcall. There are some + subtleties to take account of. First P will determine if it was woken + up in upcall by a signal from some other source (for example an + attempt to terminate P) or as is normally the case by Venus in its + sendmsg_to_kernel call. In the normal case, the upcall routine will + deallocate the message structure and return. The FS routine can proceed + with its processing. + + + **Sleeping and IPC arrangements** + + In case P is woken up by a signal and not by Venus, it will first look + at the flags field. If the message is not yet READ, the process P can + handle its signal without notifying Venus. If Venus has READ, and + the request should not be processed, P can send Venus a signal message + to indicate that it should disregard the previous message. Such + signals are put in the queue at the head, and read first by Venus. If + the message is already marked as WRITTEN it is too late to stop the + processing. The VFS routine will now continue. (-- If a VFS request + involves more than one upcall, this can lead to complicated state, an + extra field "handle_signals" could be added in the message structure + to indicate points of no return have been passed.--) + + + +3.1. Implementation details +---------------------------- + + The Unix implementation of this mechanism has been through the + implementation of a character device associated with Coda. Venus + retrieves messages by doing a read on the device, replies are sent + with a write and notification is through the select system call on the + file descriptor for the device. The process P is kept waiting on an + interruptible wait queue object. + + In Windows NT and the DPMI Windows 95 implementation a DeviceIoControl + call is used. The DeviceIoControl call is designed to copy buffers + from user memory to kernel memory with OPCODES. The sendmsg_to_kernel + is issued as a synchronous call, while the getmsg_from_kernel call is + asynchronous. Windows EventObjects are used for notification of + message arrival. The process P is kept waiting on a KernelEvent + object in NT and a semaphore in Windows 95. + + +4. The interface at the call level +=================================== + + + This section describes the upcalls a Coda FS driver can make to Venus. + Each of these upcalls make use of two structures: inputArgs and + outputArgs. In pseudo BNF form the structures take the following + form:: + + + struct inputArgs { + u_long opcode; + u_long unique; /* Keep multiple outstanding msgs distinct */ + u_short pid; /* Common to all */ + u_short pgid; /* Common to all */ + struct CodaCred cred; /* Common to all */ + + <union "in" of call dependent parts of inputArgs> + }; + + struct outputArgs { + u_long opcode; + u_long unique; /* Keep multiple outstanding msgs distinct */ + u_long result; + + <union "out" of call dependent parts of inputArgs> + }; + + + + Before going on let us elucidate the role of the various fields. The + inputArgs start with the opcode which defines the type of service + requested from Venus. There are approximately 30 upcalls at present + which we will discuss. The unique field labels the inputArg with a + unique number which will identify the message uniquely. A process and + process group id are passed. Finally the credentials of the caller + are included. + + Before delving into the specific calls we need to discuss a variety of + data structures shared by the kernel and Venus. + + + + +4.1. Data structures shared by the kernel and Venus +---------------------------------------------------- + + + The CodaCred structure defines a variety of user and group ids as + they are set for the calling process. The vuid_t and vgid_t are 32 bit + unsigned integers. It also defines group membership in an array. On + Unix the CodaCred has proven sufficient to implement good security + semantics for Coda but the structure may have to undergo modification + for the Windows environment when these mature:: + + struct CodaCred { + vuid_t cr_uid, cr_euid, cr_suid, cr_fsuid; /* Real, effective, set, fs uid */ + vgid_t cr_gid, cr_egid, cr_sgid, cr_fsgid; /* same for groups */ + vgid_t cr_groups[NGROUPS]; /* Group membership for caller */ + }; + + + .. Note:: + + It is questionable if we need CodaCreds in Venus. Finally Venus + doesn't know about groups, although it does create files with the + default uid/gid. Perhaps the list of group membership is superfluous. + + + The next item is the fundamental identifier used to identify Coda + files, the ViceFid. A fid of a file uniquely defines a file or + directory in the Coda filesystem within a cell [1]_:: + + typedef struct ViceFid { + VolumeId Volume; + VnodeId Vnode; + Unique_t Unique; + } ViceFid; + + .. [1] A cell is agroup of Coda servers acting under the aegis of a single + system control machine or SCM. See the Coda Administration manual + for a detailed description of the role of the SCM. + + Each of the constituent fields: VolumeId, VnodeId and Unique_t are + unsigned 32 bit integers. We envisage that a further field will need + to be prefixed to identify the Coda cell; this will probably take the + form of a Ipv6 size IP address naming the Coda cell through DNS. + + The next important structure shared between Venus and the kernel is + the attributes of the file. The following structure is used to + exchange information. It has room for future extensions such as + support for device files (currently not present in Coda):: + + + struct coda_timespec { + int64_t tv_sec; /* seconds */ + long tv_nsec; /* nanoseconds */ + }; + + struct coda_vattr { + enum coda_vtype va_type; /* vnode type (for create) */ + u_short va_mode; /* files access mode and type */ + short va_nlink; /* number of references to file */ + vuid_t va_uid; /* owner user id */ + vgid_t va_gid; /* owner group id */ + long va_fsid; /* file system id (dev for now) */ + long va_fileid; /* file id */ + u_quad_t va_size; /* file size in bytes */ + long va_blocksize; /* blocksize preferred for i/o */ + struct coda_timespec va_atime; /* time of last access */ + struct coda_timespec va_mtime; /* time of last modification */ + struct coda_timespec va_ctime; /* time file changed */ + u_long va_gen; /* generation number of file */ + u_long va_flags; /* flags defined for file */ + dev_t va_rdev; /* device special file represents */ + u_quad_t va_bytes; /* bytes of disk space held by file */ + u_quad_t va_filerev; /* file modification number */ + u_int va_vaflags; /* operations flags, see below */ + long va_spare; /* remain quad aligned */ + }; + + +4.2. The pioctl interface +-------------------------- + + + Coda specific requests can be made by application through the pioctl + interface. The pioctl is implemented as an ordinary ioctl on a + fictitious file /coda/.CONTROL. The pioctl call opens this file, gets + a file handle and makes the ioctl call. Finally it closes the file. + + The kernel involvement in this is limited to providing the facility to + open and close and pass the ioctl message and to verify that a path in + the pioctl data buffers is a file in a Coda filesystem. + + The kernel is handed a data packet of the form:: + + struct { + const char *path; + struct ViceIoctl vidata; + int follow; + } data; + + + + where:: + + + struct ViceIoctl { + caddr_t in, out; /* Data to be transferred in, or out */ + short in_size; /* Size of input buffer <= 2K */ + short out_size; /* Maximum size of output buffer, <= 2K */ + }; + + + + The path must be a Coda file, otherwise the ioctl upcall will not be + made. + + .. Note:: The data structures and code are a mess. We need to clean this up. + + +**We now proceed to document the individual calls**: + + +4.3. root +---------- + + + Arguments + in + + empty + + out:: + + struct cfs_root_out { + ViceFid VFid; + } cfs_root; + + + + Description + This call is made to Venus during the initialization of + the Coda filesystem. If the result is zero, the cfs_root structure + contains the ViceFid of the root of the Coda filesystem. If a non-zero + result is generated, its value is a platform dependent error code + indicating the difficulty Venus encountered in locating the root of + the Coda filesystem. + +4.4. lookup +------------ + + + Summary + Find the ViceFid and type of an object in a directory if it exists. + + Arguments + in:: + + struct cfs_lookup_in { + ViceFid VFid; + char *name; /* Place holder for data. */ + } cfs_lookup; + + + + out:: + + struct cfs_lookup_out { + ViceFid VFid; + int vtype; + } cfs_lookup; + + + + Description + This call is made to determine the ViceFid and filetype of + a directory entry. The directory entry requested carries name 'name' + and Venus will search the directory identified by cfs_lookup_in.VFid. + The result may indicate that the name does not exist, or that + difficulty was encountered in finding it (e.g. due to disconnection). + If the result is zero, the field cfs_lookup_out.VFid contains the + targets ViceFid and cfs_lookup_out.vtype the coda_vtype giving the + type of object the name designates. + + The name of the object is an 8 bit character string of maximum length + CFS_MAXNAMLEN, currently set to 256 (including a 0 terminator.) + + It is extremely important to realize that Venus bitwise ors the field + cfs_lookup.vtype with CFS_NOCACHE to indicate that the object should + not be put in the kernel name cache. + + .. Note:: + + The type of the vtype is currently wrong. It should be + coda_vtype. Linux does not take note of CFS_NOCACHE. It should. + + +4.5. getattr +------------- + + + Summary Get the attributes of a file. + + Arguments + in:: + + struct cfs_getattr_in { + ViceFid VFid; + struct coda_vattr attr; /* XXXXX */ + } cfs_getattr; + + + + out:: + + struct cfs_getattr_out { + struct coda_vattr attr; + } cfs_getattr; + + + + Description + This call returns the attributes of the file identified by fid. + + Errors + Errors can occur if the object with fid does not exist, is + unaccessible or if the caller does not have permission to fetch + attributes. + + .. Note:: + + Many kernel FS drivers (Linux, NT and Windows 95) need to acquire + the attributes as well as the Fid for the instantiation of an internal + "inode" or "FileHandle". A significant improvement in performance on + such systems could be made by combining the lookup and getattr calls + both at the Venus/kernel interaction level and at the RPC level. + + The vattr structure included in the input arguments is superfluous and + should be removed. + + +4.6. setattr +------------- + + + Summary + Set the attributes of a file. + + Arguments + in:: + + struct cfs_setattr_in { + ViceFid VFid; + struct coda_vattr attr; + } cfs_setattr; + + + + + out + + empty + + Description + The structure attr is filled with attributes to be changed + in BSD style. Attributes not to be changed are set to -1, apart from + vtype which is set to VNON. Other are set to the value to be assigned. + The only attributes which the FS driver may request to change are the + mode, owner, groupid, atime, mtime and ctime. The return value + indicates success or failure. + + Errors + A variety of errors can occur. The object may not exist, may + be inaccessible, or permission may not be granted by Venus. + + +4.7. access +------------ + + + Arguments + in:: + + struct cfs_access_in { + ViceFid VFid; + int flags; + } cfs_access; + + + + out + + empty + + Description + Verify if access to the object identified by VFid for + operations described by flags is permitted. The result indicates if + access will be granted. It is important to remember that Coda uses + ACLs to enforce protection and that ultimately the servers, not the + clients enforce the security of the system. The result of this call + will depend on whether a token is held by the user. + + Errors + The object may not exist, or the ACL describing the protection + may not be accessible. + + +4.8. create +------------ + + + Summary + Invoked to create a file + + Arguments + in:: + + struct cfs_create_in { + ViceFid VFid; + struct coda_vattr attr; + int excl; + int mode; + char *name; /* Place holder for data. */ + } cfs_create; + + + + + out:: + + struct cfs_create_out { + ViceFid VFid; + struct coda_vattr attr; + } cfs_create; + + + + Description + This upcall is invoked to request creation of a file. + The file will be created in the directory identified by VFid, its name + will be name, and the mode will be mode. If excl is set an error will + be returned if the file already exists. If the size field in attr is + set to zero the file will be truncated. The uid and gid of the file + are set by converting the CodaCred to a uid using a macro CRTOUID + (this macro is platform dependent). Upon success the VFid and + attributes of the file are returned. The Coda FS Driver will normally + instantiate a vnode, inode or file handle at kernel level for the new + object. + + + Errors + A variety of errors can occur. Permissions may be insufficient. + If the object exists and is not a file the error EISDIR is returned + under Unix. + + .. Note:: + + The packing of parameters is very inefficient and appears to + indicate confusion between the system call creat and the VFS operation + create. The VFS operation create is only called to create new objects. + This create call differs from the Unix one in that it is not invoked + to return a file descriptor. The truncate and exclusive options, + together with the mode, could simply be part of the mode as it is + under Unix. There should be no flags argument; this is used in open + (2) to return a file descriptor for READ or WRITE mode. + + The attributes of the directory should be returned too, since the size + and mtime changed. + + +4.9. mkdir +----------- + + + Summary + Create a new directory. + + Arguments + in:: + + struct cfs_mkdir_in { + ViceFid VFid; + struct coda_vattr attr; + char *name; /* Place holder for data. */ + } cfs_mkdir; + + + + out:: + + struct cfs_mkdir_out { + ViceFid VFid; + struct coda_vattr attr; + } cfs_mkdir; + + + + + Description + This call is similar to create but creates a directory. + Only the mode field in the input parameters is used for creation. + Upon successful creation, the attr returned contains the attributes of + the new directory. + + Errors + As for create. + + .. Note:: + + The input parameter should be changed to mode instead of + attributes. + + The attributes of the parent should be returned since the size and + mtime changes. + + +4.10. link +----------- + + + Summary + Create a link to an existing file. + + Arguments + in:: + + struct cfs_link_in { + ViceFid sourceFid; /* cnode to link *to* */ + ViceFid destFid; /* Directory in which to place link */ + char *tname; /* Place holder for data. */ + } cfs_link; + + + + out + + empty + + Description + This call creates a link to the sourceFid in the directory + identified by destFid with name tname. The source must reside in the + target's parent, i.e. the source must be have parent destFid, i.e. Coda + does not support cross directory hard links. Only the return value is + relevant. It indicates success or the type of failure. + + Errors + The usual errors can occur. + + +4.11. symlink +-------------- + + + Summary + create a symbolic link + + Arguments + in:: + + struct cfs_symlink_in { + ViceFid VFid; /* Directory to put symlink in */ + char *srcname; + struct coda_vattr attr; + char *tname; + } cfs_symlink; + + + + out + + none + + Description + Create a symbolic link. The link is to be placed in the + directory identified by VFid and named tname. It should point to the + pathname srcname. The attributes of the newly created object are to + be set to attr. + + .. Note:: + + The attributes of the target directory should be returned since + its size changed. + + +4.12. remove +------------- + + + Summary + Remove a file + + Arguments + in:: + + struct cfs_remove_in { + ViceFid VFid; + char *name; /* Place holder for data. */ + } cfs_remove; + + + + out + + none + + Description + Remove file named cfs_remove_in.name in directory + identified by VFid. + + + .. Note:: + + The attributes of the directory should be returned since its + mtime and size may change. + + +4.13. rmdir +------------ + + + Summary + Remove a directory + + Arguments + in:: + + struct cfs_rmdir_in { + ViceFid VFid; + char *name; /* Place holder for data. */ + } cfs_rmdir; + + + + out + + none + + Description + Remove the directory with name 'name' from the directory + identified by VFid. + + .. Note:: The attributes of the parent directory should be returned since + its mtime and size may change. + + +4.14. readlink +--------------- + + + Summary + Read the value of a symbolic link. + + Arguments + in:: + + struct cfs_readlink_in { + ViceFid VFid; + } cfs_readlink; + + + + out:: + + struct cfs_readlink_out { + int count; + caddr_t data; /* Place holder for data. */ + } cfs_readlink; + + + + Description + This routine reads the contents of symbolic link + identified by VFid into the buffer data. The buffer data must be able + to hold any name up to CFS_MAXNAMLEN (PATH or NAM??). + + Errors + No unusual errors. + + +4.15. open +----------- + + + Summary + Open a file. + + Arguments + in:: + + struct cfs_open_in { + ViceFid VFid; + int flags; + } cfs_open; + + + + out:: + + struct cfs_open_out { + dev_t dev; + ino_t inode; + } cfs_open; + + + + Description + This request asks Venus to place the file identified by + VFid in its cache and to note that the calling process wishes to open + it with flags as in open(2). The return value to the kernel differs + for Unix and Windows systems. For Unix systems the Coda FS Driver is + informed of the device and inode number of the container file in the + fields dev and inode. For Windows the path of the container file is + returned to the kernel. + + + .. Note:: + + Currently the cfs_open_out structure is not properly adapted to + deal with the Windows case. It might be best to implement two + upcalls, one to open aiming at a container file name, the other at a + container file inode. + + +4.16. close +------------ + + + Summary + Close a file, update it on the servers. + + Arguments + in:: + + struct cfs_close_in { + ViceFid VFid; + int flags; + } cfs_close; + + + + out + + none + + Description + Close the file identified by VFid. + + .. Note:: + + The flags argument is bogus and not used. However, Venus' code + has room to deal with an execp input field, probably this field should + be used to inform Venus that the file was closed but is still memory + mapped for execution. There are comments about fetching versus not + fetching the data in Venus vproc_vfscalls. This seems silly. If a + file is being closed, the data in the container file is to be the new + data. Here again the execp flag might be in play to create confusion: + currently Venus might think a file can be flushed from the cache when + it is still memory mapped. This needs to be understood. + + +4.17. ioctl +------------ + + + Summary + Do an ioctl on a file. This includes the pioctl interface. + + Arguments + in:: + + struct cfs_ioctl_in { + ViceFid VFid; + int cmd; + int len; + int rwflag; + char *data; /* Place holder for data. */ + } cfs_ioctl; + + + + out:: + + + struct cfs_ioctl_out { + int len; + caddr_t data; /* Place holder for data. */ + } cfs_ioctl; + + + + Description + Do an ioctl operation on a file. The command, len and + data arguments are filled as usual. flags is not used by Venus. + + .. Note:: + + Another bogus parameter. flags is not used. What is the + business about PREFETCHING in the Venus code? + + + +4.18. rename +------------- + + + Summary + Rename a fid. + + Arguments + in:: + + struct cfs_rename_in { + ViceFid sourceFid; + char *srcname; + ViceFid destFid; + char *destname; + } cfs_rename; + + + + out + + none + + Description + Rename the object with name srcname in directory + sourceFid to destname in destFid. It is important that the names + srcname and destname are 0 terminated strings. Strings in Unix + kernels are not always null terminated. + + +4.19. readdir +-------------- + + + Summary + Read directory entries. + + Arguments + in:: + + struct cfs_readdir_in { + ViceFid VFid; + int count; + int offset; + } cfs_readdir; + + + + + out:: + + struct cfs_readdir_out { + int size; + caddr_t data; /* Place holder for data. */ + } cfs_readdir; + + + + Description + Read directory entries from VFid starting at offset and + read at most count bytes. Returns the data in data and returns + the size in size. + + + .. Note:: + + This call is not used. Readdir operations exploit container + files. We will re-evaluate this during the directory revamp which is + about to take place. + + +4.20. vget +----------- + + + Summary + instructs Venus to do an FSDB->Get. + + Arguments + in:: + + struct cfs_vget_in { + ViceFid VFid; + } cfs_vget; + + + + out:: + + struct cfs_vget_out { + ViceFid VFid; + int vtype; + } cfs_vget; + + + + Description + This upcall asks Venus to do a get operation on an fsobj + labelled by VFid. + + .. Note:: + + This operation is not used. However, it is extremely useful + since it can be used to deal with read/write memory mapped files. + These can be "pinned" in the Venus cache using vget and released with + inactive. + + +4.21. fsync +------------ + + + Summary + Tell Venus to update the RVM attributes of a file. + + Arguments + in:: + + struct cfs_fsync_in { + ViceFid VFid; + } cfs_fsync; + + + + out + + none + + Description + Ask Venus to update RVM attributes of object VFid. This + should be called as part of kernel level fsync type calls. The + result indicates if the syncing was successful. + + .. Note:: Linux does not implement this call. It should. + + +4.22. inactive +--------------- + + + Summary + Tell Venus a vnode is no longer in use. + + Arguments + in:: + + struct cfs_inactive_in { + ViceFid VFid; + } cfs_inactive; + + + + out + + none + + Description + This operation returns EOPNOTSUPP. + + .. Note:: This should perhaps be removed. + + +4.23. rdwr +----------- + + + Summary + Read or write from a file + + Arguments + in:: + + struct cfs_rdwr_in { + ViceFid VFid; + int rwflag; + int count; + int offset; + int ioflag; + caddr_t data; /* Place holder for data. */ + } cfs_rdwr; + + + + + out:: + + struct cfs_rdwr_out { + int rwflag; + int count; + caddr_t data; /* Place holder for data. */ + } cfs_rdwr; + + + + Description + This upcall asks Venus to read or write from a file. + + + .. Note:: + + It should be removed since it is against the Coda philosophy that + read/write operations never reach Venus. I have been told the + operation does not work. It is not currently used. + + + +4.24. odymount +--------------- + + + Summary + Allows mounting multiple Coda "filesystems" on one Unix mount point. + + Arguments + in:: + + struct ody_mount_in { + char *name; /* Place holder for data. */ + } ody_mount; + + + + out:: + + struct ody_mount_out { + ViceFid VFid; + } ody_mount; + + + + Description + Asks Venus to return the rootfid of a Coda system named + name. The fid is returned in VFid. + + .. Note:: + + This call was used by David for dynamic sets. It should be + removed since it causes a jungle of pointers in the VFS mounting area. + It is not used by Coda proper. Call is not implemented by Venus. + + +4.25. ody_lookup +----------------- + + + Summary + Looks up something. + + Arguments + in + + irrelevant + + + out + + irrelevant + + + .. Note:: Gut it. Call is not implemented by Venus. + + +4.26. ody_expand +----------------- + + + Summary + expands something in a dynamic set. + + Arguments + in + + irrelevant + + out + + irrelevant + + .. Note:: Gut it. Call is not implemented by Venus. + + +4.27. prefetch +--------------- + + + Summary + Prefetch a dynamic set. + + Arguments + + in + + Not documented. + + out + + Not documented. + + Description + Venus worker.cc has support for this call, although it is + noted that it doesn't work. Not surprising, since the kernel does not + have support for it. (ODY_PREFETCH is not a defined operation). + + + .. Note:: Gut it. It isn't working and isn't used by Coda. + + + +4.28. signal +------------- + + + Summary + Send Venus a signal about an upcall. + + Arguments + in + + none + + out + + not applicable. + + Description + This is an out-of-band upcall to Venus to inform Venus + that the calling process received a signal after Venus read the + message from the input queue. Venus is supposed to clean up the + operation. + + Errors + No reply is given. + + .. Note:: + + We need to better understand what Venus needs to clean up and if + it is doing this correctly. Also we need to handle multiple upcall + per system call situations correctly. It would be important to know + what state changes in Venus take place after an upcall for which the + kernel is responsible for notifying Venus to clean up (e.g. open + definitely is such a state change, but many others are maybe not). + + +5. The minicache and downcalls +=============================== + + + The Coda FS Driver can cache results of lookup and access upcalls, to + limit the frequency of upcalls. Upcalls carry a price since a process + context switch needs to take place. The counterpart of caching the + information is that Venus will notify the FS Driver that cached + entries must be flushed or renamed. + + The kernel code generally has to maintain a structure which links the + internal file handles (called vnodes in BSD, inodes in Linux and + FileHandles in Windows) with the ViceFid's which Venus maintains. The + reason is that frequent translations back and forth are needed in + order to make upcalls and use the results of upcalls. Such linking + objects are called cnodes. + + The current minicache implementations have cache entries which record + the following: + + 1. the name of the file + + 2. the cnode of the directory containing the object + + 3. a list of CodaCred's for which the lookup is permitted. + + 4. the cnode of the object + + The lookup call in the Coda FS Driver may request the cnode of the + desired object from the cache, by passing its name, directory and the + CodaCred's of the caller. The cache will return the cnode or indicate + that it cannot be found. The Coda FS Driver must be careful to + invalidate cache entries when it modifies or removes objects. + + When Venus obtains information that indicates that cache entries are + no longer valid, it will make a downcall to the kernel. Downcalls are + intercepted by the Coda FS Driver and lead to cache invalidations of + the kind described below. The Coda FS Driver does not return an error + unless the downcall data could not be read into kernel memory. + + +5.1. INVALIDATE +---------------- + + + No information is available on this call. + + +5.2. FLUSH +----------- + + + + Arguments + None + + Summary + Flush the name cache entirely. + + Description + Venus issues this call upon startup and when it dies. This + is to prevent stale cache information being held. Some operating + systems allow the kernel name cache to be switched off dynamically. + When this is done, this downcall is made. + + +5.3. PURGEUSER +--------------- + + + Arguments + :: + + struct cfs_purgeuser_out {/* CFS_PURGEUSER is a venus->kernel call */ + struct CodaCred cred; + } cfs_purgeuser; + + + + Description + Remove all entries in the cache carrying the Cred. This + call is issued when tokens for a user expire or are flushed. + + +5.4. ZAPFILE +------------- + + + Arguments + :: + + struct cfs_zapfile_out { /* CFS_ZAPFILE is a venus->kernel call */ + ViceFid CodaFid; + } cfs_zapfile; + + + + Description + Remove all entries which have the (dir vnode, name) pair. + This is issued as a result of an invalidation of cached attributes of + a vnode. + + .. Note:: + + Call is not named correctly in NetBSD and Mach. The minicache + zapfile routine takes different arguments. Linux does not implement + the invalidation of attributes correctly. + + + +5.5. ZAPDIR +------------ + + + Arguments + :: + + struct cfs_zapdir_out { /* CFS_ZAPDIR is a venus->kernel call */ + ViceFid CodaFid; + } cfs_zapdir; + + + + Description + Remove all entries in the cache lying in a directory + CodaFid, and all children of this directory. This call is issued when + Venus receives a callback on the directory. + + +5.6. ZAPVNODE +-------------- + + + + Arguments + :: + + struct cfs_zapvnode_out { /* CFS_ZAPVNODE is a venus->kernel call */ + struct CodaCred cred; + ViceFid VFid; + } cfs_zapvnode; + + + + Description + Remove all entries in the cache carrying the cred and VFid + as in the arguments. This downcall is probably never issued. + + +5.7. PURGEFID +-------------- + + + Arguments + :: + + struct cfs_purgefid_out { /* CFS_PURGEFID is a venus->kernel call */ + ViceFid CodaFid; + } cfs_purgefid; + + + + Description + Flush the attribute for the file. If it is a dir (odd + vnode), purge its children from the namecache and remove the file from the + namecache. + + + +5.8. REPLACE +------------- + + + Summary + Replace the Fid's for a collection of names. + + Arguments + :: + + struct cfs_replace_out { /* cfs_replace is a venus->kernel call */ + ViceFid NewFid; + ViceFid OldFid; + } cfs_replace; + + + + Description + This routine replaces a ViceFid in the name cache with + another. It is added to allow Venus during reintegration to replace + locally allocated temp fids while disconnected with global fids even + when the reference counts on those fids are not zero. + + +6. Initialization and cleanup +============================== + + + This section gives brief hints as to desirable features for the Coda + FS Driver at startup and upon shutdown or Venus failures. Before + entering the discussion it is useful to repeat that the Coda FS Driver + maintains the following data: + + + 1. message queues + + 2. cnodes + + 3. name cache entries + + The name cache entries are entirely private to the driver, so they + can easily be manipulated. The message queues will generally have + clear points of initialization and destruction. The cnodes are + much more delicate. User processes hold reference counts in Coda + filesystems and it can be difficult to clean up the cnodes. + + It can expect requests through: + + 1. the message subsystem + + 2. the VFS layer + + 3. pioctl interface + + Currently the pioctl passes through the VFS for Coda so we can + treat these similarly. + + +6.1. Requirements +------------------ + + + The following requirements should be accommodated: + + 1. The message queues should have open and close routines. On Unix + the opening of the character devices are such routines. + + - Before opening, no messages can be placed. + + - Opening will remove any old messages still pending. + + - Close will notify any sleeping processes that their upcall cannot + be completed. + + - Close will free all memory allocated by the message queues. + + + 2. At open the namecache shall be initialized to empty state. + + 3. Before the message queues are open, all VFS operations will fail. + Fortunately this can be achieved by making sure than mounting the + Coda filesystem cannot succeed before opening. + + 4. After closing of the queues, no VFS operations can succeed. Here + one needs to be careful, since a few operations (lookup, + read/write, readdir) can proceed without upcalls. These must be + explicitly blocked. + + 5. Upon closing the namecache shall be flushed and disabled. + + 6. All memory held by cnodes can be freed without relying on upcalls. + + 7. Unmounting the file system can be done without relying on upcalls. + + 8. Mounting the Coda filesystem should fail gracefully if Venus cannot + get the rootfid or the attributes of the rootfid. The latter is + best implemented by Venus fetching these objects before attempting + to mount. + + .. Note:: + + NetBSD in particular but also Linux have not implemented the + above requirements fully. For smooth operation this needs to be + corrected. + + + diff --git a/Documentation/filesystems/configfs.rst b/Documentation/filesystems/configfs.rst new file mode 100644 index 000000000..1d3d6f4a8 --- /dev/null +++ b/Documentation/filesystems/configfs.rst @@ -0,0 +1,535 @@ +======================================================= +Configfs - Userspace-driven Kernel Object Configuration +======================================================= + +Joel Becker <joel.becker@oracle.com> + +Updated: 31 March 2005 + +Copyright (c) 2005 Oracle Corporation, + Joel Becker <joel.becker@oracle.com> + + +What is configfs? +================= + +configfs is a ram-based filesystem that provides the converse of +sysfs's functionality. Where sysfs is a filesystem-based view of +kernel objects, configfs is a filesystem-based manager of kernel +objects, or config_items. + +With sysfs, an object is created in kernel (for example, when a device +is discovered) and it is registered with sysfs. Its attributes then +appear in sysfs, allowing userspace to read the attributes via +readdir(3)/read(2). It may allow some attributes to be modified via +write(2). The important point is that the object is created and +destroyed in kernel, the kernel controls the lifecycle of the sysfs +representation, and sysfs is merely a window on all this. + +A configfs config_item is created via an explicit userspace operation: +mkdir(2). It is destroyed via rmdir(2). The attributes appear at +mkdir(2) time, and can be read or modified via read(2) and write(2). +As with sysfs, readdir(3) queries the list of items and/or attributes. +symlink(2) can be used to group items together. Unlike sysfs, the +lifetime of the representation is completely driven by userspace. The +kernel modules backing the items must respond to this. + +Both sysfs and configfs can and should exist together on the same +system. One is not a replacement for the other. + +Using configfs +============== + +configfs can be compiled as a module or into the kernel. You can access +it by doing:: + + mount -t configfs none /config + +The configfs tree will be empty unless client modules are also loaded. +These are modules that register their item types with configfs as +subsystems. Once a client subsystem is loaded, it will appear as a +subdirectory (or more than one) under /config. Like sysfs, the +configfs tree is always there, whether mounted on /config or not. + +An item is created via mkdir(2). The item's attributes will also +appear at this time. readdir(3) can determine what the attributes are, +read(2) can query their default values, and write(2) can store new +values. Don't mix more than one attribute in one attribute file. + +There are two types of configfs attributes: + +* Normal attributes, which similar to sysfs attributes, are small ASCII text + files, with a maximum size of one page (PAGE_SIZE, 4096 on i386). Preferably + only one value per file should be used, and the same caveats from sysfs apply. + Configfs expects write(2) to store the entire buffer at once. When writing to + normal configfs attributes, userspace processes should first read the entire + file, modify the portions they wish to change, and then write the entire + buffer back. + +* Binary attributes, which are somewhat similar to sysfs binary attributes, + but with a few slight changes to semantics. The PAGE_SIZE limitation does not + apply, but the whole binary item must fit in single kernel vmalloc'ed buffer. + The write(2) calls from user space are buffered, and the attributes' + write_bin_attribute method will be invoked on the final close, therefore it is + imperative for user-space to check the return code of close(2) in order to + verify that the operation finished successfully. + To avoid a malicious user OOMing the kernel, there's a per-binary attribute + maximum buffer value. + +When an item needs to be destroyed, remove it with rmdir(2). An +item cannot be destroyed if any other item has a link to it (via +symlink(2)). Links can be removed via unlink(2). + +Configuring FakeNBD: an Example +=============================== + +Imagine there's a Network Block Device (NBD) driver that allows you to +access remote block devices. Call it FakeNBD. FakeNBD uses configfs +for its configuration. Obviously, there will be a nice program that +sysadmins use to configure FakeNBD, but somehow that program has to tell +the driver about it. Here's where configfs comes in. + +When the FakeNBD driver is loaded, it registers itself with configfs. +readdir(3) sees this just fine:: + + # ls /config + fakenbd + +A fakenbd connection can be created with mkdir(2). The name is +arbitrary, but likely the tool will make some use of the name. Perhaps +it is a uuid or a disk name:: + + # mkdir /config/fakenbd/disk1 + # ls /config/fakenbd/disk1 + target device rw + +The target attribute contains the IP address of the server FakeNBD will +connect to. The device attribute is the device on the server. +Predictably, the rw attribute determines whether the connection is +read-only or read-write:: + + # echo 10.0.0.1 > /config/fakenbd/disk1/target + # echo /dev/sda1 > /config/fakenbd/disk1/device + # echo 1 > /config/fakenbd/disk1/rw + +That's it. That's all there is. Now the device is configured, via the +shell no less. + +Coding With configfs +==================== + +Every object in configfs is a config_item. A config_item reflects an +object in the subsystem. It has attributes that match values on that +object. configfs handles the filesystem representation of that object +and its attributes, allowing the subsystem to ignore all but the +basic show/store interaction. + +Items are created and destroyed inside a config_group. A group is a +collection of items that share the same attributes and operations. +Items are created by mkdir(2) and removed by rmdir(2), but configfs +handles that. The group has a set of operations to perform these tasks + +A subsystem is the top level of a client module. During initialization, +the client module registers the subsystem with configfs, the subsystem +appears as a directory at the top of the configfs filesystem. A +subsystem is also a config_group, and can do everything a config_group +can. + +struct config_item +================== + +:: + + struct config_item { + char *ci_name; + char ci_namebuf[UOBJ_NAME_LEN]; + struct kref ci_kref; + struct list_head ci_entry; + struct config_item *ci_parent; + struct config_group *ci_group; + struct config_item_type *ci_type; + struct dentry *ci_dentry; + }; + + void config_item_init(struct config_item *); + void config_item_init_type_name(struct config_item *, + const char *name, + struct config_item_type *type); + struct config_item *config_item_get(struct config_item *); + void config_item_put(struct config_item *); + +Generally, struct config_item is embedded in a container structure, a +structure that actually represents what the subsystem is doing. The +config_item portion of that structure is how the object interacts with +configfs. + +Whether statically defined in a source file or created by a parent +config_group, a config_item must have one of the _init() functions +called on it. This initializes the reference count and sets up the +appropriate fields. + +All users of a config_item should have a reference on it via +config_item_get(), and drop the reference when they are done via +config_item_put(). + +By itself, a config_item cannot do much more than appear in configfs. +Usually a subsystem wants the item to display and/or store attributes, +among other things. For that, it needs a type. + +struct config_item_type +======================= + +:: + + struct configfs_item_operations { + void (*release)(struct config_item *); + int (*allow_link)(struct config_item *src, + struct config_item *target); + void (*drop_link)(struct config_item *src, + struct config_item *target); + }; + + struct config_item_type { + struct module *ct_owner; + struct configfs_item_operations *ct_item_ops; + struct configfs_group_operations *ct_group_ops; + struct configfs_attribute **ct_attrs; + struct configfs_bin_attribute **ct_bin_attrs; + }; + +The most basic function of a config_item_type is to define what +operations can be performed on a config_item. All items that have been +allocated dynamically will need to provide the ct_item_ops->release() +method. This method is called when the config_item's reference count +reaches zero. + +struct configfs_attribute +========================= + +:: + + struct configfs_attribute { + char *ca_name; + struct module *ca_owner; + umode_t ca_mode; + ssize_t (*show)(struct config_item *, char *); + ssize_t (*store)(struct config_item *, const char *, size_t); + }; + +When a config_item wants an attribute to appear as a file in the item's +configfs directory, it must define a configfs_attribute describing it. +It then adds the attribute to the NULL-terminated array +config_item_type->ct_attrs. When the item appears in configfs, the +attribute file will appear with the configfs_attribute->ca_name +filename. configfs_attribute->ca_mode specifies the file permissions. + +If an attribute is readable and provides a ->show method, that method will +be called whenever userspace asks for a read(2) on the attribute. If an +attribute is writable and provides a ->store method, that method will be +called whenever userspace asks for a write(2) on the attribute. + +struct configfs_bin_attribute +============================= + +:: + + struct configfs_bin_attribute { + struct configfs_attribute cb_attr; + void *cb_private; + size_t cb_max_size; + }; + +The binary attribute is used when the one needs to use binary blob to +appear as the contents of a file in the item's configfs directory. +To do so add the binary attribute to the NULL-terminated array +config_item_type->ct_bin_attrs, and the item appears in configfs, the +attribute file will appear with the configfs_bin_attribute->cb_attr.ca_name +filename. configfs_bin_attribute->cb_attr.ca_mode specifies the file +permissions. +The cb_private member is provided for use by the driver, while the +cb_max_size member specifies the maximum amount of vmalloc buffer +to be used. + +If binary attribute is readable and the config_item provides a +ct_item_ops->read_bin_attribute() method, that method will be called +whenever userspace asks for a read(2) on the attribute. The converse +will happen for write(2). The reads/writes are bufferred so only a +single read/write will occur; the attributes' need not concern itself +with it. + +struct config_group +=================== + +A config_item cannot live in a vacuum. The only way one can be created +is via mkdir(2) on a config_group. This will trigger creation of a +child item:: + + struct config_group { + struct config_item cg_item; + struct list_head cg_children; + struct configfs_subsystem *cg_subsys; + struct list_head default_groups; + struct list_head group_entry; + }; + + void config_group_init(struct config_group *group); + void config_group_init_type_name(struct config_group *group, + const char *name, + struct config_item_type *type); + + +The config_group structure contains a config_item. Properly configuring +that item means that a group can behave as an item in its own right. +However, it can do more: it can create child items or groups. This is +accomplished via the group operations specified on the group's +config_item_type:: + + struct configfs_group_operations { + struct config_item *(*make_item)(struct config_group *group, + const char *name); + struct config_group *(*make_group)(struct config_group *group, + const char *name); + int (*commit_item)(struct config_item *item); + void (*disconnect_notify)(struct config_group *group, + struct config_item *item); + void (*drop_item)(struct config_group *group, + struct config_item *item); + }; + +A group creates child items by providing the +ct_group_ops->make_item() method. If provided, this method is called from +mkdir(2) in the group's directory. The subsystem allocates a new +config_item (or more likely, its container structure), initializes it, +and returns it to configfs. Configfs will then populate the filesystem +tree to reflect the new item. + +If the subsystem wants the child to be a group itself, the subsystem +provides ct_group_ops->make_group(). Everything else behaves the same, +using the group _init() functions on the group. + +Finally, when userspace calls rmdir(2) on the item or group, +ct_group_ops->drop_item() is called. As a config_group is also a +config_item, it is not necessary for a separate drop_group() method. +The subsystem must config_item_put() the reference that was initialized +upon item allocation. If a subsystem has no work to do, it may omit +the ct_group_ops->drop_item() method, and configfs will call +config_item_put() on the item on behalf of the subsystem. + +Important: + drop_item() is void, and as such cannot fail. When rmdir(2) + is called, configfs WILL remove the item from the filesystem tree + (assuming that it has no children to keep it busy). The subsystem is + responsible for responding to this. If the subsystem has references to + the item in other threads, the memory is safe. It may take some time + for the item to actually disappear from the subsystem's usage. But it + is gone from configfs. + +When drop_item() is called, the item's linkage has already been torn +down. It no longer has a reference on its parent and has no place in +the item hierarchy. If a client needs to do some cleanup before this +teardown happens, the subsystem can implement the +ct_group_ops->disconnect_notify() method. The method is called after +configfs has removed the item from the filesystem view but before the +item is removed from its parent group. Like drop_item(), +disconnect_notify() is void and cannot fail. Client subsystems should +not drop any references here, as they still must do it in drop_item(). + +A config_group cannot be removed while it still has child items. This +is implemented in the configfs rmdir(2) code. ->drop_item() will not be +called, as the item has not been dropped. rmdir(2) will fail, as the +directory is not empty. + +struct configfs_subsystem +========================= + +A subsystem must register itself, usually at module_init time. This +tells configfs to make the subsystem appear in the file tree:: + + struct configfs_subsystem { + struct config_group su_group; + struct mutex su_mutex; + }; + + int configfs_register_subsystem(struct configfs_subsystem *subsys); + void configfs_unregister_subsystem(struct configfs_subsystem *subsys); + +A subsystem consists of a toplevel config_group and a mutex. +The group is where child config_items are created. For a subsystem, +this group is usually defined statically. Before calling +configfs_register_subsystem(), the subsystem must have initialized the +group via the usual group _init() functions, and it must also have +initialized the mutex. + +When the register call returns, the subsystem is live, and it +will be visible via configfs. At that point, mkdir(2) can be called and +the subsystem must be ready for it. + +An Example +========== + +The best example of these basic concepts is the simple_children +subsystem/group and the simple_child item in +samples/configfs/configfs_sample.c. It shows a trivial object displaying +and storing an attribute, and a simple group creating and destroying +these children. + +Hierarchy Navigation and the Subsystem Mutex +============================================ + +There is an extra bonus that configfs provides. The config_groups and +config_items are arranged in a hierarchy due to the fact that they +appear in a filesystem. A subsystem is NEVER to touch the filesystem +parts, but the subsystem might be interested in this hierarchy. For +this reason, the hierarchy is mirrored via the config_group->cg_children +and config_item->ci_parent structure members. + +A subsystem can navigate the cg_children list and the ci_parent pointer +to see the tree created by the subsystem. This can race with configfs' +management of the hierarchy, so configfs uses the subsystem mutex to +protect modifications. Whenever a subsystem wants to navigate the +hierarchy, it must do so under the protection of the subsystem +mutex. + +A subsystem will be prevented from acquiring the mutex while a newly +allocated item has not been linked into this hierarchy. Similarly, it +will not be able to acquire the mutex while a dropping item has not +yet been unlinked. This means that an item's ci_parent pointer will +never be NULL while the item is in configfs, and that an item will only +be in its parent's cg_children list for the same duration. This allows +a subsystem to trust ci_parent and cg_children while they hold the +mutex. + +Item Aggregation Via symlink(2) +=============================== + +configfs provides a simple group via the group->item parent/child +relationship. Often, however, a larger environment requires aggregation +outside of the parent/child connection. This is implemented via +symlink(2). + +A config_item may provide the ct_item_ops->allow_link() and +ct_item_ops->drop_link() methods. If the ->allow_link() method exists, +symlink(2) may be called with the config_item as the source of the link. +These links are only allowed between configfs config_items. Any +symlink(2) attempt outside the configfs filesystem will be denied. + +When symlink(2) is called, the source config_item's ->allow_link() +method is called with itself and a target item. If the source item +allows linking to target item, it returns 0. A source item may wish to +reject a link if it only wants links to a certain type of object (say, +in its own subsystem). + +When unlink(2) is called on the symbolic link, the source item is +notified via the ->drop_link() method. Like the ->drop_item() method, +this is a void function and cannot return failure. The subsystem is +responsible for responding to the change. + +A config_item cannot be removed while it links to any other item, nor +can it be removed while an item links to it. Dangling symlinks are not +allowed in configfs. + +Automatically Created Subgroups +=============================== + +A new config_group may want to have two types of child config_items. +While this could be codified by magic names in ->make_item(), it is much +more explicit to have a method whereby userspace sees this divergence. + +Rather than have a group where some items behave differently than +others, configfs provides a method whereby one or many subgroups are +automatically created inside the parent at its creation. Thus, +mkdir("parent") results in "parent", "parent/subgroup1", up through +"parent/subgroupN". Items of type 1 can now be created in +"parent/subgroup1", and items of type N can be created in +"parent/subgroupN". + +These automatic subgroups, or default groups, do not preclude other +children of the parent group. If ct_group_ops->make_group() exists, +other child groups can be created on the parent group directly. + +A configfs subsystem specifies default groups by adding them using the +configfs_add_default_group() function to the parent config_group +structure. Each added group is populated in the configfs tree at the same +time as the parent group. Similarly, they are removed at the same time +as the parent. No extra notification is provided. When a ->drop_item() +method call notifies the subsystem the parent group is going away, it +also means every default group child associated with that parent group. + +As a consequence of this, default groups cannot be removed directly via +rmdir(2). They also are not considered when rmdir(2) on the parent +group is checking for children. + +Dependent Subsystems +==================== + +Sometimes other drivers depend on particular configfs items. For +example, ocfs2 mounts depend on a heartbeat region item. If that +region item is removed with rmdir(2), the ocfs2 mount must BUG or go +readonly. Not happy. + +configfs provides two additional API calls: configfs_depend_item() and +configfs_undepend_item(). A client driver can call +configfs_depend_item() on an existing item to tell configfs that it is +depended on. configfs will then return -EBUSY from rmdir(2) for that +item. When the item is no longer depended on, the client driver calls +configfs_undepend_item() on it. + +These API cannot be called underneath any configfs callbacks, as +they will conflict. They can block and allocate. A client driver +probably shouldn't calling them of its own gumption. Rather it should +be providing an API that external subsystems call. + +How does this work? Imagine the ocfs2 mount process. When it mounts, +it asks for a heartbeat region item. This is done via a call into the +heartbeat code. Inside the heartbeat code, the region item is looked +up. Here, the heartbeat code calls configfs_depend_item(). If it +succeeds, then heartbeat knows the region is safe to give to ocfs2. +If it fails, it was being torn down anyway, and heartbeat can gracefully +pass up an error. + +Committable Items +================= + +Note: + Committable items are currently unimplemented. + +Some config_items cannot have a valid initial state. That is, no +default values can be specified for the item's attributes such that the +item can do its work. Userspace must configure one or more attributes, +after which the subsystem can start whatever entity this item +represents. + +Consider the FakeNBD device from above. Without a target address *and* +a target device, the subsystem has no idea what block device to import. +The simple example assumes that the subsystem merely waits until all the +appropriate attributes are configured, and then connects. This will, +indeed, work, but now every attribute store must check if the attributes +are initialized. Every attribute store must fire off the connection if +that condition is met. + +Far better would be an explicit action notifying the subsystem that the +config_item is ready to go. More importantly, an explicit action allows +the subsystem to provide feedback as to whether the attributes are +initialized in a way that makes sense. configfs provides this as +committable items. + +configfs still uses only normal filesystem operations. An item is +committed via rename(2). The item is moved from a directory where it +can be modified to a directory where it cannot. + +Any group that provides the ct_group_ops->commit_item() method has +committable items. When this group appears in configfs, mkdir(2) will +not work directly in the group. Instead, the group will have two +subdirectories: "live" and "pending". The "live" directory does not +support mkdir(2) or rmdir(2) either. It only allows rename(2). The +"pending" directory does allow mkdir(2) and rmdir(2). An item is +created in the "pending" directory. Its attributes can be modified at +will. Userspace commits the item by renaming it into the "live" +directory. At this point, the subsystem receives the ->commit_item() +callback. If all required attributes are filled to satisfaction, the +method returns zero and the item is moved to the "live" directory. + +As rmdir(2) does not work in the "live" directory, an item must be +shutdown, or "uncommitted". Again, this is done via rename(2), this +time from the "live" directory back to the "pending" one. The subsystem +is notified by the ct_group_ops->uncommit_object() method. diff --git a/Documentation/filesystems/cramfs.rst b/Documentation/filesystems/cramfs.rst new file mode 100644 index 000000000..afbdbde98 --- /dev/null +++ b/Documentation/filesystems/cramfs.rst @@ -0,0 +1,123 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=========================================== +Cramfs - cram a filesystem onto a small ROM +=========================================== + +cramfs is designed to be simple and small, and to compress things well. + +It uses the zlib routines to compress a file one page at a time, and +allows random page access. The meta-data is not compressed, but is +expressed in a very terse representation to make it use much less +diskspace than traditional filesystems. + +You can't write to a cramfs filesystem (making it compressible and +compact also makes it _very_ hard to update on-the-fly), so you have to +create the disk image with the "mkcramfs" utility. + + +Usage Notes +----------- + +File sizes are limited to less than 16MB. + +Maximum filesystem size is a little over 256MB. (The last file on the +filesystem is allowed to extend past 256MB.) + +Only the low 8 bits of gid are stored. The current version of +mkcramfs simply truncates to 8 bits, which is a potential security +issue. + +Hard links are supported, but hard linked files +will still have a link count of 1 in the cramfs image. + +Cramfs directories have no ``.`` or ``..`` entries. Directories (like +every other file on cramfs) always have a link count of 1. (There's +no need to use -noleaf in ``find``, btw.) + +No timestamps are stored in a cramfs, so these default to the epoch +(1970 GMT). Recently-accessed files may have updated timestamps, but +the update lasts only as long as the inode is cached in memory, after +which the timestamp reverts to 1970, i.e. moves backwards in time. + +Currently, cramfs must be written and read with architectures of the +same endianness, and can be read only by kernels with PAGE_SIZE +== 4096. At least the latter of these is a bug, but it hasn't been +decided what the best fix is. For the moment if you have larger pages +you can just change the #define in mkcramfs.c, so long as you don't +mind the filesystem becoming unreadable to future kernels. + + +Memory Mapped cramfs image +-------------------------- + +The CRAMFS_MTD Kconfig option adds support for loading data directly from +a physical linear memory range (usually non volatile memory like Flash) +instead of going through the block device layer. This saves some memory +since no intermediate buffering is necessary to hold the data before +decompressing. + +And when data blocks are kept uncompressed and properly aligned, they will +automatically be mapped directly into user space whenever possible providing +eXecute-In-Place (XIP) from ROM of read-only segments. Data segments mapped +read-write (hence they have to be copied to RAM) may still be compressed in +the cramfs image in the same file along with non compressed read-only +segments. Both MMU and no-MMU systems are supported. This is particularly +handy for tiny embedded systems with very tight memory constraints. + +The location of the cramfs image in memory is system dependent. You must +know the proper physical address where the cramfs image is located and +configure an MTD device for it. Also, that MTD device must be supported +by a map driver that implements the "point" method. Examples of such +MTD drivers are cfi_cmdset_0001 (Intel/Sharp CFI flash) or physmap +(Flash device in physical memory map). MTD partitions based on such devices +are fine too. Then that device should be specified with the "mtd:" prefix +as the mount device argument. For example, to mount the MTD device named +"fs_partition" on the /mnt directory:: + + $ mount -t cramfs mtd:fs_partition /mnt + +To boot a kernel with this as root filesystem, suffice to specify +something like "root=mtd:fs_partition" on the kernel command line. + + +Tools +----- + +A version of mkcramfs that can take advantage of the latest capabilities +described above can be found here: + +https://github.com/npitre/cramfs-tools + + +For /usr/share/magic +-------------------- + +===== ======================= ======================= +0 ulelong 0x28cd3d45 Linux cramfs offset 0 +>4 ulelong x size %d +>8 ulelong x flags 0x%x +>12 ulelong x future 0x%x +>16 string >\0 signature "%.16s" +>32 ulelong x fsid.crc 0x%x +>36 ulelong x fsid.edition %d +>40 ulelong x fsid.blocks %d +>44 ulelong x fsid.files %d +>48 string >\0 name "%.16s" +512 ulelong 0x28cd3d45 Linux cramfs offset 512 +>516 ulelong x size %d +>520 ulelong x flags 0x%x +>524 ulelong x future 0x%x +>528 string >\0 signature "%.16s" +>544 ulelong x fsid.crc 0x%x +>548 ulelong x fsid.edition %d +>552 ulelong x fsid.blocks %d +>556 ulelong x fsid.files %d +>560 string >\0 name "%.16s" +===== ======================= ======================= + + +Hacker Notes +------------ + +See fs/cramfs/README for filesystem layout and implementation notes. diff --git a/Documentation/filesystems/dax.txt b/Documentation/filesystems/dax.txt new file mode 100644 index 000000000..8fdb78f3c --- /dev/null +++ b/Documentation/filesystems/dax.txt @@ -0,0 +1,268 @@ +Direct Access for files +----------------------- + +Motivation +---------- + +The page cache is usually used to buffer reads and writes to files. +It is also used to provide the pages which are mapped into userspace +by a call to mmap. + +For block devices that are memory-like, the page cache pages would be +unnecessary copies of the original storage. The DAX code removes the +extra copy by performing reads and writes directly to the storage device. +For file mappings, the storage device is mapped directly into userspace. + + +Usage +----- + +If you have a block device which supports DAX, you can make a filesystem +on it as usual. The DAX code currently only supports files with a block +size equal to your kernel's PAGE_SIZE, so you may need to specify a block +size when creating the filesystem. + +Currently 3 filesystems support DAX: ext2, ext4 and xfs. Enabling DAX on them +is different. + +Enabling DAX on ext2 +----------------------------- + +When mounting the filesystem, use the "-o dax" option on the command line or +add 'dax' to the options in /etc/fstab. This works to enable DAX on all files +within the filesystem. It is equivalent to the '-o dax=always' behavior below. + + +Enabling DAX on xfs and ext4 +---------------------------- + +Summary +------- + + 1. There exists an in-kernel file access mode flag S_DAX that corresponds to + the statx flag STATX_ATTR_DAX. See the manpage for statx(2) for details + about this access mode. + + 2. There exists a persistent flag FS_XFLAG_DAX that can be applied to regular + files and directories. This advisory flag can be set or cleared at any + time, but doing so does not immediately affect the S_DAX state. + + 3. If the persistent FS_XFLAG_DAX flag is set on a directory, this flag will + be inherited by all regular files and subdirectories that are subsequently + created in this directory. Files and subdirectories that exist at the time + this flag is set or cleared on the parent directory are not modified by + this modification of the parent directory. + + 4. There exist dax mount options which can override FS_XFLAG_DAX in the + setting of the S_DAX flag. Given underlying storage which supports DAX the + following hold: + + "-o dax=inode" means "follow FS_XFLAG_DAX" and is the default. + + "-o dax=never" means "never set S_DAX, ignore FS_XFLAG_DAX." + + "-o dax=always" means "always set S_DAX ignore FS_XFLAG_DAX." + + "-o dax" is a legacy option which is an alias for "dax=always". + This may be removed in the future so "-o dax=always" is + the preferred method for specifying this behavior. + + NOTE: Modifications to and the inheritance behavior of FS_XFLAG_DAX remain + the same even when the filesystem is mounted with a dax option. However, + in-core inode state (S_DAX) will be overridden until the filesystem is + remounted with dax=inode and the inode is evicted from kernel memory. + + 5. The S_DAX policy can be changed via: + + a) Setting the parent directory FS_XFLAG_DAX as needed before files are + created + + b) Setting the appropriate dax="foo" mount option + + c) Changing the FS_XFLAG_DAX flag on existing regular files and + directories. This has runtime constraints and limitations that are + described in 6) below. + + 6. When changing the S_DAX policy via toggling the persistent FS_XFLAG_DAX flag, + the change in behaviour for existing regular files may not occur + immediately. If the change must take effect immediately, the administrator + needs to: + + a) stop the application so there are no active references to the data set + the policy change will affect + + b) evict the data set from kernel caches so it will be re-instantiated when + the application is restarted. This can be achieved by: + + i. drop-caches + ii. a filesystem unmount and mount cycle + iii. a system reboot + + +Details +------- + +There are 2 per-file dax flags. One is a persistent inode setting (FS_XFLAG_DAX) +and the other is a volatile flag indicating the active state of the feature +(S_DAX). + +FS_XFLAG_DAX is preserved within the filesystem. This persistent config +setting can be set, cleared and/or queried using the FS_IOC_FS[GS]ETXATTR ioctl +(see ioctl_xfs_fsgetxattr(2)) or an utility such as 'xfs_io'. + +New files and directories automatically inherit FS_XFLAG_DAX from +their parent directory _when_ _created_. Therefore, setting FS_XFLAG_DAX at +directory creation time can be used to set a default behavior for an entire +sub-tree. + +To clarify inheritance, here are 3 examples: + +Example A: + +mkdir -p a/b/c +xfs_io -c 'chattr +x' a +mkdir a/b/c/d +mkdir a/e + + dax: a,e + no dax: b,c,d + +Example B: + +mkdir a +xfs_io -c 'chattr +x' a +mkdir -p a/b/c/d + + dax: a,b,c,d + no dax: + +Example C: + +mkdir -p a/b/c +xfs_io -c 'chattr +x' c +mkdir a/b/c/d + + dax: c,d + no dax: a,b + + +The current enabled state (S_DAX) is set when a file inode is instantiated in +memory by the kernel. It is set based on the underlying media support, the +value of FS_XFLAG_DAX and the filesystem's dax mount option. + +statx can be used to query S_DAX. NOTE that only regular files will ever have +S_DAX set and therefore statx will never indicate that S_DAX is set on +directories. + +Setting the FS_XFLAG_DAX flag (specifically or through inheritance) occurs even +if the underlying media does not support dax and/or the filesystem is +overridden with a mount option. + + + +Implementation Tips for Block Driver Writers +-------------------------------------------- + +To support DAX in your block driver, implement the 'direct_access' +block device operation. It is used to translate the sector number +(expressed in units of 512-byte sectors) to a page frame number (pfn) +that identifies the physical page for the memory. It also returns a +kernel virtual address that can be used to access the memory. + +The direct_access method takes a 'size' parameter that indicates the +number of bytes being requested. The function should return the number +of bytes that can be contiguously accessed at that offset. It may also +return a negative errno if an error occurs. + +In order to support this method, the storage must be byte-accessible by +the CPU at all times. If your device uses paging techniques to expose +a large amount of memory through a smaller window, then you cannot +implement direct_access. Equally, if your device can occasionally +stall the CPU for an extended period, you should also not attempt to +implement direct_access. + +These block devices may be used for inspiration: +- brd: RAM backed block device driver +- dcssblk: s390 dcss block device driver +- pmem: NVDIMM persistent memory driver + + +Implementation Tips for Filesystem Writers +------------------------------------------ + +Filesystem support consists of +- adding support to mark inodes as being DAX by setting the S_DAX flag in + i_flags +- implementing ->read_iter and ->write_iter operations which use dax_iomap_rw() + when inode has S_DAX flag set +- implementing an mmap file operation for DAX files which sets the + VM_MIXEDMAP and VM_HUGEPAGE flags on the VMA, and setting the vm_ops to + include handlers for fault, pmd_fault, page_mkwrite, pfn_mkwrite. These + handlers should probably call dax_iomap_fault() passing the appropriate + fault size and iomap operations. +- calling iomap_zero_range() passing appropriate iomap operations instead of + block_truncate_page() for DAX files +- ensuring that there is sufficient locking between reads, writes, + truncates and page faults + +The iomap handlers for allocating blocks must make sure that allocated blocks +are zeroed out and converted to written extents before being returned to avoid +exposure of uninitialized data through mmap. + +These filesystems may be used for inspiration: +- ext2: see Documentation/filesystems/ext2.rst +- ext4: see Documentation/filesystems/ext4/ +- xfs: see Documentation/admin-guide/xfs.rst + + +Handling Media Errors +--------------------- + +The libnvdimm subsystem stores a record of known media error locations for +each pmem block device (in gendisk->badblocks). If we fault at such location, +or one with a latent error not yet discovered, the application can expect +to receive a SIGBUS. Libnvdimm also allows clearing of these errors by simply +writing the affected sectors (through the pmem driver, and if the underlying +NVDIMM supports the clear_poison DSM defined by ACPI). + +Since DAX IO normally doesn't go through the driver/bio path, applications or +sysadmins have an option to restore the lost data from a prior backup/inbuilt +redundancy in the following ways: + +1. Delete the affected file, and restore from a backup (sysadmin route): + This will free the filesystem blocks that were being used by the file, + and the next time they're allocated, they will be zeroed first, which + happens through the driver, and will clear bad sectors. + +2. Truncate or hole-punch the part of the file that has a bad-block (at least + an entire aligned sector has to be hole-punched, but not necessarily an + entire filesystem block). + +These are the two basic paths that allow DAX filesystems to continue operating +in the presence of media errors. More robust error recovery mechanisms can be +built on top of this in the future, for example, involving redundancy/mirroring +provided at the block layer through DM, or additionally, at the filesystem +level. These would have to rely on the above two tenets, that error clearing +can happen either by sending an IO through the driver, or zeroing (also through +the driver). + + +Shortcomings +------------ + +Even if the kernel or its modules are stored on a filesystem that supports +DAX on a block device that supports DAX, they will still be copied into RAM. + +The DAX code does not work correctly on architectures which have virtually +mapped caches such as ARM, MIPS and SPARC. + +Calling get_user_pages() on a range of user memory that has been mmaped +from a DAX file will fail when there are no 'struct page' to describe +those pages. This problem has been addressed in some device drivers +by adding optional struct page support for pages under the control of +the driver (see CONFIG_NVDIMM_PFN in drivers/nvdimm for an example of +how to do this). In the non struct page cases O_DIRECT reads/writes to +those memory ranges from a non-DAX file will fail (note that O_DIRECT +reads/writes _of a DAX file_ do work, it is the memory that is being +accessed that is key here). Other things that will not work in the +non struct page case include RDMA, sendfile() and splice(). diff --git a/Documentation/filesystems/debugfs.rst b/Documentation/filesystems/debugfs.rst new file mode 100644 index 000000000..0f2292e36 --- /dev/null +++ b/Documentation/filesystems/debugfs.rst @@ -0,0 +1,252 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: <isonum.txt> + +======= +DebugFS +======= + +Copyright |copy| 2009 Jonathan Corbet <corbet@lwn.net> + +Debugfs exists as a simple way for kernel developers to make information +available to user space. Unlike /proc, which is only meant for information +about a process, or sysfs, which has strict one-value-per-file rules, +debugfs has no rules at all. Developers can put any information they want +there. The debugfs filesystem is also intended to not serve as a stable +ABI to user space; in theory, there are no stability constraints placed on +files exported there. The real world is not always so simple, though [1]_; +even debugfs interfaces are best designed with the idea that they will need +to be maintained forever. + +Debugfs is typically mounted with a command like:: + + mount -t debugfs none /sys/kernel/debug + +(Or an equivalent /etc/fstab line). +The debugfs root directory is accessible only to the root user by +default. To change access to the tree the "uid", "gid" and "mode" mount +options can be used. + +Note that the debugfs API is exported GPL-only to modules. + +Code using debugfs should include <linux/debugfs.h>. Then, the first order +of business will be to create at least one directory to hold a set of +debugfs files:: + + struct dentry *debugfs_create_dir(const char *name, struct dentry *parent); + +This call, if successful, will make a directory called name underneath the +indicated parent directory. If parent is NULL, the directory will be +created in the debugfs root. On success, the return value is a struct +dentry pointer which can be used to create files in the directory (and to +clean it up at the end). An ERR_PTR(-ERROR) return value indicates that +something went wrong. If ERR_PTR(-ENODEV) is returned, that is an +indication that the kernel has been built without debugfs support and none +of the functions described below will work. + +The most general way to create a file within a debugfs directory is with:: + + struct dentry *debugfs_create_file(const char *name, umode_t mode, + struct dentry *parent, void *data, + const struct file_operations *fops); + +Here, name is the name of the file to create, mode describes the access +permissions the file should have, parent indicates the directory which +should hold the file, data will be stored in the i_private field of the +resulting inode structure, and fops is a set of file operations which +implement the file's behavior. At a minimum, the read() and/or write() +operations should be provided; others can be included as needed. Again, +the return value will be a dentry pointer to the created file, +ERR_PTR(-ERROR) on error, or ERR_PTR(-ENODEV) if debugfs support is +missing. + +Create a file with an initial size, the following function can be used +instead:: + + void debugfs_create_file_size(const char *name, umode_t mode, + struct dentry *parent, void *data, + const struct file_operations *fops, + loff_t file_size); + +file_size is the initial file size. The other parameters are the same +as the function debugfs_create_file. + +In a number of cases, the creation of a set of file operations is not +actually necessary; the debugfs code provides a number of helper functions +for simple situations. Files containing a single integer value can be +created with any of:: + + void debugfs_create_u8(const char *name, umode_t mode, + struct dentry *parent, u8 *value); + void debugfs_create_u16(const char *name, umode_t mode, + struct dentry *parent, u16 *value); + void debugfs_create_u32(const char *name, umode_t mode, + struct dentry *parent, u32 *value); + void debugfs_create_u64(const char *name, umode_t mode, + struct dentry *parent, u64 *value); + +These files support both reading and writing the given value; if a specific +file should not be written to, simply set the mode bits accordingly. The +values in these files are in decimal; if hexadecimal is more appropriate, +the following functions can be used instead:: + + void debugfs_create_x8(const char *name, umode_t mode, + struct dentry *parent, u8 *value); + void debugfs_create_x16(const char *name, umode_t mode, + struct dentry *parent, u16 *value); + void debugfs_create_x32(const char *name, umode_t mode, + struct dentry *parent, u32 *value); + void debugfs_create_x64(const char *name, umode_t mode, + struct dentry *parent, u64 *value); + +These functions are useful as long as the developer knows the size of the +value to be exported. Some types can have different widths on different +architectures, though, complicating the situation somewhat. There are +functions meant to help out in such special cases:: + + void debugfs_create_size_t(const char *name, umode_t mode, + struct dentry *parent, size_t *value); + +As might be expected, this function will create a debugfs file to represent +a variable of type size_t. + +Similarly, there are helpers for variables of type unsigned long, in decimal +and hexadecimal:: + + struct dentry *debugfs_create_ulong(const char *name, umode_t mode, + struct dentry *parent, + unsigned long *value); + void debugfs_create_xul(const char *name, umode_t mode, + struct dentry *parent, unsigned long *value); + +Boolean values can be placed in debugfs with:: + + struct dentry *debugfs_create_bool(const char *name, umode_t mode, + struct dentry *parent, bool *value); + +A read on the resulting file will yield either Y (for non-zero values) or +N, followed by a newline. If written to, it will accept either upper- or +lower-case values, or 1 or 0. Any other input will be silently ignored. + +Also, atomic_t values can be placed in debugfs with:: + + void debugfs_create_atomic_t(const char *name, umode_t mode, + struct dentry *parent, atomic_t *value) + +A read of this file will get atomic_t values, and a write of this file +will set atomic_t values. + +Another option is exporting a block of arbitrary binary data, with +this structure and function:: + + struct debugfs_blob_wrapper { + void *data; + unsigned long size; + }; + + struct dentry *debugfs_create_blob(const char *name, umode_t mode, + struct dentry *parent, + struct debugfs_blob_wrapper *blob); + +A read of this file will return the data pointed to by the +debugfs_blob_wrapper structure. Some drivers use "blobs" as a simple way +to return several lines of (static) formatted text output. This function +can be used to export binary information, but there does not appear to be +any code which does so in the mainline. Note that all files created with +debugfs_create_blob() are read-only. + +If you want to dump a block of registers (something that happens quite +often during development, even if little such code reaches mainline. +Debugfs offers two functions: one to make a registers-only file, and +another to insert a register block in the middle of another sequential +file:: + + struct debugfs_reg32 { + char *name; + unsigned long offset; + }; + + struct debugfs_regset32 { + const struct debugfs_reg32 *regs; + int nregs; + void __iomem *base; + struct device *dev; /* Optional device for Runtime PM */ + }; + + debugfs_create_regset32(const char *name, umode_t mode, + struct dentry *parent, + struct debugfs_regset32 *regset); + + void debugfs_print_regs32(struct seq_file *s, const struct debugfs_reg32 *regs, + int nregs, void __iomem *base, char *prefix); + +The "base" argument may be 0, but you may want to build the reg32 array +using __stringify, and a number of register names (macros) are actually +byte offsets over a base for the register block. + +If you want to dump an u32 array in debugfs, you can create file with:: + + struct debugfs_u32_array { + u32 *array; + u32 n_elements; + }; + + void debugfs_create_u32_array(const char *name, umode_t mode, + struct dentry *parent, + struct debugfs_u32_array *array); + +The "array" argument wraps a pointer to the array's data and the number +of its elements. Note: Once array is created its size can not be changed. + +There is a helper function to create device related seq_file:: + + void debugfs_create_devm_seqfile(struct device *dev, + const char *name, + struct dentry *parent, + int (*read_fn)(struct seq_file *s, + void *data)); + +The "dev" argument is the device related to this debugfs file, and +the "read_fn" is a function pointer which to be called to print the +seq_file content. + +There are a couple of other directory-oriented helper functions:: + + struct dentry *debugfs_rename(struct dentry *old_dir, + struct dentry *old_dentry, + struct dentry *new_dir, + const char *new_name); + + struct dentry *debugfs_create_symlink(const char *name, + struct dentry *parent, + const char *target); + +A call to debugfs_rename() will give a new name to an existing debugfs +file, possibly in a different directory. The new_name must not exist prior +to the call; the return value is old_dentry with updated information. +Symbolic links can be created with debugfs_create_symlink(). + +There is one important thing that all debugfs users must take into account: +there is no automatic cleanup of any directories created in debugfs. If a +module is unloaded without explicitly removing debugfs entries, the result +will be a lot of stale pointers and no end of highly antisocial behavior. +So all debugfs users - at least those which can be built as modules - must +be prepared to remove all files and directories they create there. A file +can be removed with:: + + void debugfs_remove(struct dentry *dentry); + +The dentry value can be NULL or an error value, in which case nothing will +be removed. + +Once upon a time, debugfs users were required to remember the dentry +pointer for every debugfs file they created so that all files could be +cleaned up. We live in more civilized times now, though, and debugfs users +can call:: + + void debugfs_remove_recursive(struct dentry *dentry); + +If this function is passed a pointer for the dentry corresponding to the +top-level directory, the entire hierarchy below that directory will be +removed. + +.. [1] http://lwn.net/Articles/309298/ diff --git a/Documentation/filesystems/devpts.rst b/Documentation/filesystems/devpts.rst new file mode 100644 index 000000000..a03248ddf --- /dev/null +++ b/Documentation/filesystems/devpts.rst @@ -0,0 +1,36 @@ +.. SPDX-License-Identifier: GPL-2.0 + +===================== +The Devpts Filesystem +===================== + +Each mount of the devpts filesystem is now distinct such that ptys +and their indicies allocated in one mount are independent from ptys +and their indicies in all other mounts. + +All mounts of the devpts filesystem now create a ``/dev/pts/ptmx`` node +with permissions ``0000``. + +To retain backwards compatibility the a ptmx device node (aka any node +created with ``mknod name c 5 2``) when opened will look for an instance +of devpts under the name ``pts`` in the same directory as the ptmx device +node. + +As an option instead of placing a ``/dev/ptmx`` device node at ``/dev/ptmx`` +it is possible to place a symlink to ``/dev/pts/ptmx`` at ``/dev/ptmx`` or +to bind mount ``/dev/ptx/ptmx`` to ``/dev/ptmx``. If you opt for using +the devpts filesystem in this manner devpts should be mounted with +the ``ptmxmode=0666``, or ``chmod 0666 /dev/pts/ptmx`` should be called. + +Total count of pty pairs in all instances is limited by sysctls:: + + kernel.pty.max = 4096 - global limit + kernel.pty.reserve = 1024 - reserved for filesystems mounted from the initial mount namespace + kernel.pty.nr - current count of ptys + +Per-instance limit could be set by adding mount option ``max=<count>``. + +This feature was added in kernel 3.4 together with +``sysctl kernel.pty.reserve``. + +In kernels older than 3.4 sysctl ``kernel.pty.max`` works as per-instance limit. diff --git a/Documentation/filesystems/directory-locking.rst b/Documentation/filesystems/directory-locking.rst new file mode 100644 index 000000000..dccd61c7c --- /dev/null +++ b/Documentation/filesystems/directory-locking.rst @@ -0,0 +1,147 @@ +================= +Directory Locking +================= + + +Locking scheme used for directory operations is based on two +kinds of locks - per-inode (->i_rwsem) and per-filesystem +(->s_vfs_rename_mutex). + +When taking the i_rwsem on multiple non-directory objects, we +always acquire the locks in order by increasing address. We'll call +that "inode pointer" order in the following. + +For our purposes all operations fall in 5 classes: + +1) read access. Locking rules: caller locks directory we are accessing. +The lock is taken shared. + +2) object creation. Locking rules: same as above, but the lock is taken +exclusive. + +3) object removal. Locking rules: caller locks parent, finds victim, +locks victim and calls the method. Locks are exclusive. + +4) rename() that is _not_ cross-directory. Locking rules: caller locks the +parent and finds source and target. We lock both (provided they exist). If we +need to lock two inodes of different type (dir vs non-dir), we lock directory +first. If we need to lock two inodes of the same type, lock them in inode +pointer order. Then call the method. All locks are exclusive. +NB: we might get away with locking the source (and target in exchange +case) shared. + +5) link creation. Locking rules: + + * lock parent + * check that source is not a directory + * lock source + * call the method. + +All locks are exclusive. + +6) cross-directory rename. The trickiest in the whole bunch. Locking +rules: + + * lock the filesystem + * lock parents in "ancestors first" order. If one is not ancestor of + the other, lock them in inode pointer order. + * find source and target. + * if old parent is equal to or is a descendent of target + fail with -ENOTEMPTY + * if new parent is equal to or is a descendent of source + fail with -ELOOP + * Lock both the source and the target provided they exist. If we + need to lock two inodes of different type (dir vs non-dir), we lock + the directory first. If we need to lock two inodes of the same type, + lock them in inode pointer order. + * call the method. + +All ->i_rwsem are taken exclusive. Again, we might get away with locking +the source (and target in exchange case) shared. + +The rules above obviously guarantee that all directories that are going to be +read, modified or removed by method will be locked by caller. + + +If no directory is its own ancestor, the scheme above is deadlock-free. + +Proof: + + First of all, at any moment we have a linear ordering of the + objects - A < B iff (A is an ancestor of B) or (B is not an ancestor + of A and ptr(A) < ptr(B)). + + That ordering can change. However, the following is true: + +(1) if object removal or non-cross-directory rename holds lock on A and + attempts to acquire lock on B, A will remain the parent of B until we + acquire the lock on B. (Proof: only cross-directory rename can change + the parent of object and it would have to lock the parent). + +(2) if cross-directory rename holds the lock on filesystem, order will not + change until rename acquires all locks. (Proof: other cross-directory + renames will be blocked on filesystem lock and we don't start changing + the order until we had acquired all locks). + +(3) locks on non-directory objects are acquired only after locks on + directory objects, and are acquired in inode pointer order. + (Proof: all operations but renames take lock on at most one + non-directory object, except renames, which take locks on source and + target in inode pointer order in the case they are not directories.) + +Now consider the minimal deadlock. Each process is blocked on +attempt to acquire some lock and already holds at least one lock. Let's +consider the set of contended locks. First of all, filesystem lock is +not contended, since any process blocked on it is not holding any locks. +Thus all processes are blocked on ->i_rwsem. + +By (3), any process holding a non-directory lock can only be +waiting on another non-directory lock with a larger address. Therefore +the process holding the "largest" such lock can always make progress, and +non-directory objects are not included in the set of contended locks. + +Thus link creation can't be a part of deadlock - it can't be +blocked on source and it means that it doesn't hold any locks. + +Any contended object is either held by cross-directory rename or +has a child that is also contended. Indeed, suppose that it is held by +operation other than cross-directory rename. Then the lock this operation +is blocked on belongs to child of that object due to (1). + +It means that one of the operations is cross-directory rename. +Otherwise the set of contended objects would be infinite - each of them +would have a contended child and we had assumed that no object is its +own descendent. Moreover, there is exactly one cross-directory rename +(see above). + +Consider the object blocking the cross-directory rename. One +of its descendents is locked by cross-directory rename (otherwise we +would again have an infinite set of contended objects). But that +means that cross-directory rename is taking locks out of order. Due +to (2) the order hadn't changed since we had acquired filesystem lock. +But locking rules for cross-directory rename guarantee that we do not +try to acquire lock on descendent before the lock on ancestor. +Contradiction. I.e. deadlock is impossible. Q.E.D. + + +These operations are guaranteed to avoid loop creation. Indeed, +the only operation that could introduce loops is cross-directory rename. +Since the only new (parent, child) pair added by rename() is (new parent, +source), such loop would have to contain these objects and the rest of it +would have to exist before rename(). I.e. at the moment of loop creation +rename() responsible for that would be holding filesystem lock and new parent +would have to be equal to or a descendent of source. But that means that +new parent had been equal to or a descendent of source since the moment when +we had acquired filesystem lock and rename() would fail with -ELOOP in that +case. + +While this locking scheme works for arbitrary DAGs, it relies on +ability to check that directory is a descendent of another object. Current +implementation assumes that directory graph is a tree. This assumption is +also preserved by all operations (cross-directory rename on a tree that would +not introduce a cycle will leave it a tree and link() fails for directories). + +Notice that "directory" in the above == "anything that might have +children", so if we are going to introduce hybrid objects we will need +either to make sure that link(2) doesn't work for them or to make changes +in is_subdir() that would make it work even in presence of such beasts. diff --git a/Documentation/filesystems/dlmfs.rst b/Documentation/filesystems/dlmfs.rst new file mode 100644 index 000000000..28dd41a63 --- /dev/null +++ b/Documentation/filesystems/dlmfs.rst @@ -0,0 +1,140 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: <isonum.txt> + +===== +DLMFS +===== + +A minimal DLM userspace interface implemented via a virtual file +system. + +dlmfs is built with OCFS2 as it requires most of its infrastructure. + +:Project web page: http://ocfs2.wiki.kernel.org +:Tools web page: https://github.com/markfasheh/ocfs2-tools +:OCFS2 mailing lists: https://oss.oracle.com/projects/ocfs2/mailman/ + +All code copyright 2005 Oracle except when otherwise noted. + +Credits +======= + +Some code taken from ramfs which is Copyright |copy| 2000 Linus Torvalds +and Transmeta Corp. + +Mark Fasheh <mark.fasheh@oracle.com> + +Caveats +======= +- Right now it only works with the OCFS2 DLM, though support for other + DLM implementations should not be a major issue. + +Mount options +============= +None + +Usage +===== + +If you're just interested in OCFS2, then please see ocfs2.txt. The +rest of this document will be geared towards those who want to use +dlmfs for easy to setup and easy to use clustered locking in +userspace. + +Setup +===== + +dlmfs requires that the OCFS2 cluster infrastructure be in +place. Please download ocfs2-tools from the above url and configure a +cluster. + +You'll want to start heartbeating on a volume which all the nodes in +your lockspace can access. The easiest way to do this is via +ocfs2_hb_ctl (distributed with ocfs2-tools). Right now it requires +that an OCFS2 file system be in place so that it can automatically +find its heartbeat area, though it will eventually support heartbeat +against raw disks. + +Please see the ocfs2_hb_ctl and mkfs.ocfs2 manual pages distributed +with ocfs2-tools. + +Once you're heartbeating, DLM lock 'domains' can be easily created / +destroyed and locks within them accessed. + +Locking +======= + +Users may access dlmfs via standard file system calls, or they can use +'libo2dlm' (distributed with ocfs2-tools) which abstracts the file +system calls and presents a more traditional locking api. + +dlmfs handles lock caching automatically for the user, so a lock +request for an already acquired lock will not generate another DLM +call. Userspace programs are assumed to handle their own local +locking. + +Two levels of locks are supported - Shared Read, and Exclusive. +Also supported is a Trylock operation. + +For information on the libo2dlm interface, please see o2dlm.h, +distributed with ocfs2-tools. + +Lock value blocks can be read and written to a resource via read(2) +and write(2) against the fd obtained via your open(2) call. The +maximum currently supported LVB length is 64 bytes (though that is an +OCFS2 DLM limitation). Through this mechanism, users of dlmfs can share +small amounts of data amongst their nodes. + +mkdir(2) signals dlmfs to join a domain (which will have the same name +as the resulting directory) + +rmdir(2) signals dlmfs to leave the domain + +Locks for a given domain are represented by regular inodes inside the +domain directory. Locking against them is done via the open(2) system +call. + +The open(2) call will not return until your lock has been granted or +an error has occurred, unless it has been instructed to do a trylock +operation. If the lock succeeds, you'll get an fd. + +open(2) with O_CREAT to ensure the resource inode is created - dlmfs does +not automatically create inodes for existing lock resources. + +============ =========================== +Open Flag Lock Request Type +============ =========================== +O_RDONLY Shared Read +O_RDWR Exclusive +============ =========================== + + +============ =========================== +Open Flag Resulting Locking Behavior +============ =========================== +O_NONBLOCK Trylock operation +============ =========================== + +You must provide exactly one of O_RDONLY or O_RDWR. + +If O_NONBLOCK is also provided and the trylock operation was valid but +could not lock the resource then open(2) will return ETXTBUSY. + +close(2) drops the lock associated with your fd. + +Modes passed to mkdir(2) or open(2) are adhered to locally. Chown is +supported locally as well. This means you can use them to restrict +access to the resources via dlmfs on your local node only. + +The resource LVB may be read from the fd in either Shared Read or +Exclusive modes via the read(2) system call. It can be written via +write(2) only when open in Exclusive mode. + +Once written, an LVB will be visible to other nodes who obtain Read +Only or higher level locks on the resource. + +See Also +======== +http://opendlm.sourceforge.net/cvsmirror/opendlm/docs/dlmbook_final.pdf + +For more information on the VMS distributed locking API. diff --git a/Documentation/filesystems/dnotify.rst b/Documentation/filesystems/dnotify.rst new file mode 100644 index 000000000..a28a1f9ef --- /dev/null +++ b/Documentation/filesystems/dnotify.rst @@ -0,0 +1,75 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================ +Linux Directory Notification +============================ + + Stephen Rothwell <sfr@canb.auug.org.au> + +The intention of directory notification is to allow user applications +to be notified when a directory, or any of the files in it, are changed. +The basic mechanism involves the application registering for notification +on a directory using a fcntl(2) call and the notifications themselves +being delivered using signals. + +The application decides which "events" it wants to be notified about. +The currently defined events are: + + ========= ===================================================== + DN_ACCESS A file in the directory was accessed (read) + DN_MODIFY A file in the directory was modified (write,truncate) + DN_CREATE A file was created in the directory + DN_DELETE A file was unlinked from directory + DN_RENAME A file in the directory was renamed + DN_ATTRIB A file in the directory had its attributes + changed (chmod,chown) + ========= ===================================================== + +Usually, the application must reregister after each notification, but +if DN_MULTISHOT is or'ed with the event mask, then the registration will +remain until explicitly removed (by registering for no events). + +By default, SIGIO will be delivered to the process and no other useful +information. However, if the F_SETSIG fcntl(2) call is used to let the +kernel know which signal to deliver, a siginfo structure will be passed to +the signal handler and the si_fd member of that structure will contain the +file descriptor associated with the directory in which the event occurred. + +Preferably the application will choose one of the real time signals +(SIGRTMIN + <n>) so that the notifications may be queued. This is +especially important if DN_MULTISHOT is specified. Note that SIGRTMIN +is often blocked, so it is better to use (at least) SIGRTMIN + 1. + +Implementation expectations (features and bugs :-)) +--------------------------------------------------- + +The notification should work for any local access to files even if the +actual file system is on a remote server. This implies that remote +access to files served by local user mode servers should be notified. +Also, remote accesses to files served by a local kernel NFS server should +be notified. + +In order to make the impact on the file system code as small as possible, +the problem of hard links to files has been ignored. So if a file (x) +exists in two directories (a and b) then a change to the file using the +name "a/x" should be notified to a program expecting notifications on +directory "a", but will not be notified to one expecting notifications on +directory "b". + +Also, files that are unlinked, will still cause notifications in the +last directory that they were linked to. + +Configuration +------------- + +Dnotify is controlled via the CONFIG_DNOTIFY configuration option. When +disabled, fcntl(fd, F_NOTIFY, ...) will return -EINVAL. + +Example +------- +See tools/testing/selftests/filesystems/dnotify_test.c for an example. + +NOTE +---- +Beginning with Linux 2.6.13, dnotify has been replaced by inotify. +See Documentation/filesystems/inotify.rst for more information on it. diff --git a/Documentation/filesystems/ecryptfs.rst b/Documentation/filesystems/ecryptfs.rst new file mode 100644 index 000000000..1f2edef4c --- /dev/null +++ b/Documentation/filesystems/ecryptfs.rst @@ -0,0 +1,86 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================================================== +eCryptfs: A stacked cryptographic filesystem for Linux +====================================================== + +eCryptfs is free software. Please see the file COPYING for details. +For documentation, please see the files in the doc/ subdirectory. For +building and installation instructions please see the INSTALL file. + +:Maintainer: Phillip Hellewell +:Lead developer: Michael A. Halcrow <mhalcrow@us.ibm.com> +:Developers: Michael C. Thompson + Kent Yoder +:Web Site: http://ecryptfs.sf.net + +This software is currently undergoing development. Make sure to +maintain a backup copy of any data you write into eCryptfs. + +eCryptfs requires the userspace tools downloadable from the +SourceForge site: + +http://sourceforge.net/projects/ecryptfs/ + +Userspace requirements include: + +- David Howells' userspace keyring headers and libraries (version + 1.0 or higher), obtainable from + http://people.redhat.com/~dhowells/keyutils/ +- Libgcrypt + + +.. note:: + + In the beta/experimental releases of eCryptfs, when you upgrade + eCryptfs, you should copy the files to an unencrypted location and + then copy the files back into the new eCryptfs mount to migrate the + files. + + +Mount-wide Passphrase +===================== + +Create a new directory into which eCryptfs will write its encrypted +files (i.e., /root/crypt). Then, create the mount point directory +(i.e., /mnt/crypt). Now it's time to mount eCryptfs:: + + mount -t ecryptfs /root/crypt /mnt/crypt + +You should be prompted for a passphrase and a salt (the salt may be +blank). + +Try writing a new file:: + + echo "Hello, World" > /mnt/crypt/hello.txt + +The operation will complete. Notice that there is a new file in +/root/crypt that is at least 12288 bytes in size (depending on your +host page size). This is the encrypted underlying file for what you +just wrote. To test reading, from start to finish, you need to clear +the user session keyring: + +keyctl clear @u + +Then umount /mnt/crypt and mount again per the instructions given +above. + +:: + + cat /mnt/crypt/hello.txt + + +Notes +===== + +eCryptfs version 0.1 should only be mounted on (1) empty directories +or (2) directories containing files only created by eCryptfs. If you +mount a directory that has pre-existing files not created by eCryptfs, +then behavior is undefined. Do not run eCryptfs in higher verbosity +levels unless you are doing so for the sole purpose of debugging or +development, since secret values will be written out to the system log +in that case. + + +Mike Halcrow +mhalcrow@us.ibm.com diff --git a/Documentation/filesystems/efivarfs.rst b/Documentation/filesystems/efivarfs.rst new file mode 100644 index 000000000..055198582 --- /dev/null +++ b/Documentation/filesystems/efivarfs.rst @@ -0,0 +1,43 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================================= +efivarfs - a (U)EFI variable filesystem +======================================= + +The efivarfs filesystem was created to address the shortcomings of +using entries in sysfs to maintain EFI variables. The old sysfs EFI +variables code only supported variables of up to 1024 bytes. This +limitation existed in version 0.99 of the EFI specification, but was +removed before any full releases. Since variables can now be larger +than a single page, sysfs isn't the best interface for this. + +Variables can be created, deleted and modified with the efivarfs +filesystem. + +efivarfs is typically mounted like this:: + + mount -t efivarfs none /sys/firmware/efi/efivars + +Due to the presence of numerous firmware bugs where removing non-standard +UEFI variables causes the system firmware to fail to POST, efivarfs +files that are not well-known standardized variables are created +as immutable files. This doesn't prevent removal - "chattr -i" will work - +but it does prevent this kind of failure from being accomplished +accidentally. + +.. warning :: + When a content of an UEFI variable in /sys/firmware/efi/efivars is + displayed, for example using "hexdump", pay attention that the first + 4 bytes of the output represent the UEFI variable attributes, + in little-endian format. + + Practically the output of each efivar is composed of: + + +-----------------------------------+ + |4_bytes_of_attributes + efivar_data| + +-----------------------------------+ + +*See also:* + +- Documentation/admin-guide/acpi/ssdt-overlays.rst +- Documentation/ABI/stable/sysfs-firmware-efi-vars diff --git a/Documentation/filesystems/erofs.rst b/Documentation/filesystems/erofs.rst new file mode 100644 index 000000000..bf145171c --- /dev/null +++ b/Documentation/filesystems/erofs.rst @@ -0,0 +1,240 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================================== +Enhanced Read-Only File System - EROFS +====================================== + +Overview +======== + +EROFS file-system stands for Enhanced Read-Only File System. Different +from other read-only file systems, it aims to be designed for flexibility, +scalability, but be kept simple and high performance. + +It is designed as a better filesystem solution for the following scenarios: + + - read-only storage media or + + - part of a fully trusted read-only solution, which means it needs to be + immutable and bit-for-bit identical to the official golden image for + their releases due to security and other considerations and + + - hope to save some extra storage space with guaranteed end-to-end performance + by using reduced metadata and transparent file compression, especially + for those embedded devices with limited memory (ex, smartphone); + +Here is the main features of EROFS: + + - Little endian on-disk design; + + - Currently 4KB block size (nobh) and therefore maximum 16TB address space; + + - Metadata & data could be mixed by design; + + - 2 inode versions for different requirements: + + ===================== ============ ===================================== + compact (v1) extended (v2) + ===================== ============ ===================================== + Inode metadata size 32 bytes 64 bytes + Max file size 4 GB 16 EB (also limited by max. vol size) + Max uids/gids 65536 4294967296 + File change time no yes (64 + 32-bit timestamp) + Max hardlinks 65536 4294967296 + Metadata reserved 4 bytes 14 bytes + ===================== ============ ===================================== + + - Support extended attributes (xattrs) as an option; + + - Support xattr inline and tail-end data inline for all files; + + - Support POSIX.1e ACLs by using xattrs; + + - Support transparent file compression as an option: + LZ4 algorithm with 4 KB fixed-sized output compression for high performance. + +The following git tree provides the file system user-space tools under +development (ex, formatting tool mkfs.erofs): + +- git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs-utils.git + +Bugs and patches are welcome, please kindly help us and send to the following +linux-erofs mailing list: + +- linux-erofs mailing list <linux-erofs@lists.ozlabs.org> + +Mount options +============= + +=================== ========================================================= +(no)user_xattr Setup Extended User Attributes. Note: xattr is enabled + by default if CONFIG_EROFS_FS_XATTR is selected. +(no)acl Setup POSIX Access Control List. Note: acl is enabled + by default if CONFIG_EROFS_FS_POSIX_ACL is selected. +cache_strategy=%s Select a strategy for cached decompression from now on: + + ========== ============================================= + disabled In-place I/O decompression only; + readahead Cache the last incomplete compressed physical + cluster for further reading. It still does + in-place I/O decompression for the rest + compressed physical clusters; + readaround Cache the both ends of incomplete compressed + physical clusters for further reading. + It still does in-place I/O decompression + for the rest compressed physical clusters. + ========== ============================================= +=================== ========================================================= + +On-disk details +=============== + +Summary +------- +Different from other read-only file systems, an EROFS volume is designed +to be as simple as possible:: + + |-> aligned with the block size + ____________________________________________________________ + | |SB| | ... | Metadata | ... | Data | Metadata | ... | Data | + |_|__|_|_____|__________|_____|______|__________|_____|______| + 0 +1K + +All data areas should be aligned with the block size, but metadata areas +may not. All metadatas can be now observed in two different spaces (views): + + 1. Inode metadata space + + Each valid inode should be aligned with an inode slot, which is a fixed + value (32 bytes) and designed to be kept in line with compact inode size. + + Each inode can be directly found with the following formula: + inode offset = meta_blkaddr * block_size + 32 * nid + + :: + + |-> aligned with 8B + |-> followed closely + + meta_blkaddr blocks |-> another slot + _____________________________________________________________________ + | ... | inode | xattrs | extents | data inline | ... | inode ... + |________|_______|(optional)|(optional)|__(optional)_|_____|__________ + |-> aligned with the inode slot size + . . + . . + . . + . . + . . + . . + .____________________________________________________|-> aligned with 4B + | xattr_ibody_header | shared xattrs | inline xattrs | + |____________________|_______________|_______________| + |-> 12 bytes <-|->x * 4 bytes<-| . + . . . + . . . + . . . + ._______________________________.______________________. + | id | id | id | id | ... | id | ent | ... | ent| ... | + |____|____|____|____|______|____|_____|_____|____|_____| + |-> aligned with 4B + |-> aligned with 4B + + Inode could be 32 or 64 bytes, which can be distinguished from a common + field which all inode versions have -- i_format:: + + __________________ __________________ + | i_format | | i_format | + |__________________| |__________________| + | ... | | ... | + | | | | + |__________________| 32 bytes | | + | | + |__________________| 64 bytes + + Xattrs, extents, data inline are followed by the corresponding inode with + proper alignment, and they could be optional for different data mappings. + _currently_ total 4 valid data mappings are supported: + + == ==================================================================== + 0 flat file data without data inline (no extent); + 1 fixed-sized output data compression (with non-compacted indexes); + 2 flat file data with tail packing data inline (no extent); + 3 fixed-sized output data compression (with compacted indexes, v5.3+). + == ==================================================================== + + The size of the optional xattrs is indicated by i_xattr_count in inode + header. Large xattrs or xattrs shared by many different files can be + stored in shared xattrs metadata rather than inlined right after inode. + + 2. Shared xattrs metadata space + + Shared xattrs space is similar to the above inode space, started with + a specific block indicated by xattr_blkaddr, organized one by one with + proper align. + + Each share xattr can also be directly found by the following formula: + xattr offset = xattr_blkaddr * block_size + 4 * xattr_id + + :: + + |-> aligned by 4 bytes + + xattr_blkaddr blocks |-> aligned with 4 bytes + _________________________________________________________________________ + | ... | xattr_entry | xattr data | ... | xattr_entry | xattr data ... + |________|_____________|_____________|_____|______________|_______________ + +Directories +----------- +All directories are now organized in a compact on-disk format. Note that +each directory block is divided into index and name areas in order to support +random file lookup, and all directory entries are _strictly_ recorded in +alphabetical order in order to support improved prefix binary search +algorithm (could refer to the related source code). + +:: + + ___________________________ + / | + / ______________|________________ + / / | nameoff1 | nameoffN-1 + ____________.______________._______________v________________v__________ + | dirent | dirent | ... | dirent | filename | filename | ... | filename | + |___.0___|____1___|_____|___N-1__|____0_____|____1_____|_____|___N-1____| + \ ^ + \ | * could have + \ | trailing '\0' + \________________________| nameoff0 + + Directory block + +Note that apart from the offset of the first filename, nameoff0 also indicates +the total number of directory entries in this block since it is no need to +introduce another on-disk field at all. + +Compression +----------- +Currently, EROFS supports 4KB fixed-sized output transparent file compression, +as illustrated below:: + + |---- Variant-Length Extent ----|-------- VLE --------|----- VLE ----- + clusterofs clusterofs clusterofs + | | | logical data + _________v_______________________________v_____________________v_______________ + ... | . | | . | | . | ... + ____|____.________|_____________|________.____|_____________|__.__________|____ + |-> cluster <-|-> cluster <-|-> cluster <-|-> cluster <-|-> cluster <-| + size size size size size + . . . . + . . . . + . . . . + _______._____________._____________._____________._____________________ + ... | | | | ... physical data + _______|_____________|_____________|_____________|_____________________ + |-> cluster <-|-> cluster <-|-> cluster <-| + size size size + +Currently each on-disk physical cluster can contain 4KB (un)compressed data +at most. For each logical cluster, there is a corresponding on-disk index to +describe its cluster type, physical cluster address, etc. + +See "struct z_erofs_vle_decompressed_index" in erofs_fs.h for more details. diff --git a/Documentation/filesystems/ext2.rst b/Documentation/filesystems/ext2.rst new file mode 100644 index 000000000..d83dbbb16 --- /dev/null +++ b/Documentation/filesystems/ext2.rst @@ -0,0 +1,399 @@ +.. SPDX-License-Identifier: GPL-2.0 + + +The Second Extended Filesystem +============================== + +ext2 was originally released in January 1993. Written by R\'emy Card, +Theodore Ts'o and Stephen Tweedie, it was a major rewrite of the +Extended Filesystem. It is currently still (April 2001) the predominant +filesystem in use by Linux. There are also implementations available +for NetBSD, FreeBSD, the GNU HURD, Windows 95/98/NT, OS/2 and RISC OS. + +Options +======= + +Most defaults are determined by the filesystem superblock, and can be +set using tune2fs(8). Kernel-determined defaults are indicated by (*). + +==================== === ================================================ +bsddf (*) Makes ``df`` act like BSD. +minixdf Makes ``df`` act like Minix. + +check=none, nocheck (*) Don't do extra checking of bitmaps on mount + (check=normal and check=strict options removed) + +dax Use direct access (no page cache). See + Documentation/filesystems/dax.txt. + +debug Extra debugging information is sent to the + kernel syslog. Useful for developers. + +errors=continue Keep going on a filesystem error. +errors=remount-ro Remount the filesystem read-only on an error. +errors=panic Panic and halt the machine if an error occurs. + +grpid, bsdgroups Give objects the same group ID as their parent. +nogrpid, sysvgroups New objects have the group ID of their creator. + +nouid32 Use 16-bit UIDs and GIDs. + +oldalloc Enable the old block allocator. Orlov should + have better performance, we'd like to get some + feedback if it's the contrary for you. +orlov (*) Use the Orlov block allocator. + (See http://lwn.net/Articles/14633/ and + http://lwn.net/Articles/14446/.) + +resuid=n The user ID which may use the reserved blocks. +resgid=n The group ID which may use the reserved blocks. + +sb=n Use alternate superblock at this location. + +user_xattr Enable "user." POSIX Extended Attributes + (requires CONFIG_EXT2_FS_XATTR). +nouser_xattr Don't support "user." extended attributes. + +acl Enable POSIX Access Control Lists support + (requires CONFIG_EXT2_FS_POSIX_ACL). +noacl Don't support POSIX ACLs. + +nobh Do not attach buffer_heads to file pagecache. + +quota, usrquota Enable user disk quota support + (requires CONFIG_QUOTA). + +grpquota Enable group disk quota support + (requires CONFIG_QUOTA). +==================== === ================================================ + +noquota option ls silently ignored by ext2. + + +Specification +============= + +ext2 shares many properties with traditional Unix filesystems. It has +the concepts of blocks, inodes and directories. It has space in the +specification for Access Control Lists (ACLs), fragments, undeletion and +compression though these are not yet implemented (some are available as +separate patches). There is also a versioning mechanism to allow new +features (such as journalling) to be added in a maximally compatible +manner. + +Blocks +------ + +The space in the device or file is split up into blocks. These are +a fixed size, of 1024, 2048 or 4096 bytes (8192 bytes on Alpha systems), +which is decided when the filesystem is created. Smaller blocks mean +less wasted space per file, but require slightly more accounting overhead, +and also impose other limits on the size of files and the filesystem. + +Block Groups +------------ + +Blocks are clustered into block groups in order to reduce fragmentation +and minimise the amount of head seeking when reading a large amount +of consecutive data. Information about each block group is kept in a +descriptor table stored in the block(s) immediately after the superblock. +Two blocks near the start of each group are reserved for the block usage +bitmap and the inode usage bitmap which show which blocks and inodes +are in use. Since each bitmap is limited to a single block, this means +that the maximum size of a block group is 8 times the size of a block. + +The block(s) following the bitmaps in each block group are designated +as the inode table for that block group and the remainder are the data +blocks. The block allocation algorithm attempts to allocate data blocks +in the same block group as the inode which contains them. + +The Superblock +-------------- + +The superblock contains all the information about the configuration of +the filing system. The primary copy of the superblock is stored at an +offset of 1024 bytes from the start of the device, and it is essential +to mounting the filesystem. Since it is so important, backup copies of +the superblock are stored in block groups throughout the filesystem. +The first version of ext2 (revision 0) stores a copy at the start of +every block group, along with backups of the group descriptor block(s). +Because this can consume a considerable amount of space for large +filesystems, later revisions can optionally reduce the number of backup +copies by only putting backups in specific groups (this is the sparse +superblock feature). The groups chosen are 0, 1 and powers of 3, 5 and 7. + +The information in the superblock contains fields such as the total +number of inodes and blocks in the filesystem and how many are free, +how many inodes and blocks are in each block group, when the filesystem +was mounted (and if it was cleanly unmounted), when it was modified, +what version of the filesystem it is (see the Revisions section below) +and which OS created it. + +If the filesystem is revision 1 or higher, then there are extra fields, +such as a volume name, a unique identification number, the inode size, +and space for optional filesystem features to store configuration info. + +All fields in the superblock (as in all other ext2 structures) are stored +on the disc in little endian format, so a filesystem is portable between +machines without having to know what machine it was created on. + +Inodes +------ + +The inode (index node) is a fundamental concept in the ext2 filesystem. +Each object in the filesystem is represented by an inode. The inode +structure contains pointers to the filesystem blocks which contain the +data held in the object and all of the metadata about an object except +its name. The metadata about an object includes the permissions, owner, +group, flags, size, number of blocks used, access time, change time, +modification time, deletion time, number of links, fragments, version +(for NFS) and extended attributes (EAs) and/or Access Control Lists (ACLs). + +There are some reserved fields which are currently unused in the inode +structure and several which are overloaded. One field is reserved for the +directory ACL if the inode is a directory and alternately for the top 32 +bits of the file size if the inode is a regular file (allowing file sizes +larger than 2GB). The translator field is unused under Linux, but is used +by the HURD to reference the inode of a program which will be used to +interpret this object. Most of the remaining reserved fields have been +used up for both Linux and the HURD for larger owner and group fields, +The HURD also has a larger mode field so it uses another of the remaining +fields to store the extra more bits. + +There are pointers to the first 12 blocks which contain the file's data +in the inode. There is a pointer to an indirect block (which contains +pointers to the next set of blocks), a pointer to a doubly-indirect +block (which contains pointers to indirect blocks) and a pointer to a +trebly-indirect block (which contains pointers to doubly-indirect blocks). + +The flags field contains some ext2-specific flags which aren't catered +for by the standard chmod flags. These flags can be listed with lsattr +and changed with the chattr command, and allow specific filesystem +behaviour on a per-file basis. There are flags for secure deletion, +undeletable, compression, synchronous updates, immutability, append-only, +dumpable, no-atime, indexed directories, and data-journaling. Not all +of these are supported yet. + +Directories +----------- + +A directory is a filesystem object and has an inode just like a file. +It is a specially formatted file containing records which associate +each name with an inode number. Later revisions of the filesystem also +encode the type of the object (file, directory, symlink, device, fifo, +socket) to avoid the need to check the inode itself for this information +(support for taking advantage of this feature does not yet exist in +Glibc 2.2). + +The inode allocation code tries to assign inodes which are in the same +block group as the directory in which they are first created. + +The current implementation of ext2 uses a singly-linked list to store +the filenames in the directory; a pending enhancement uses hashing of the +filenames to allow lookup without the need to scan the entire directory. + +The current implementation never removes empty directory blocks once they +have been allocated to hold more files. + +Special files +------------- + +Symbolic links are also filesystem objects with inodes. They deserve +special mention because the data for them is stored within the inode +itself if the symlink is less than 60 bytes long. It uses the fields +which would normally be used to store the pointers to data blocks. +This is a worthwhile optimisation as it we avoid allocating a full +block for the symlink, and most symlinks are less than 60 characters long. + +Character and block special devices never have data blocks assigned to +them. Instead, their device number is stored in the inode, again reusing +the fields which would be used to point to the data blocks. + +Reserved Space +-------------- + +In ext2, there is a mechanism for reserving a certain number of blocks +for a particular user (normally the super-user). This is intended to +allow for the system to continue functioning even if non-privileged users +fill up all the space available to them (this is independent of filesystem +quotas). It also keeps the filesystem from filling up entirely which +helps combat fragmentation. + +Filesystem check +---------------- + +At boot time, most systems run a consistency check (e2fsck) on their +filesystems. The superblock of the ext2 filesystem contains several +fields which indicate whether fsck should actually run (since checking +the filesystem at boot can take a long time if it is large). fsck will +run if the filesystem was not cleanly unmounted, if the maximum mount +count has been exceeded or if the maximum time between checks has been +exceeded. + +Feature Compatibility +--------------------- + +The compatibility feature mechanism used in ext2 is sophisticated. +It safely allows features to be added to the filesystem, without +unnecessarily sacrificing compatibility with older versions of the +filesystem code. The feature compatibility mechanism is not supported by +the original revision 0 (EXT2_GOOD_OLD_REV) of ext2, but was introduced in +revision 1. There are three 32-bit fields, one for compatible features +(COMPAT), one for read-only compatible (RO_COMPAT) features and one for +incompatible (INCOMPAT) features. + +These feature flags have specific meanings for the kernel as follows: + +A COMPAT flag indicates that a feature is present in the filesystem, +but the on-disk format is 100% compatible with older on-disk formats, so +a kernel which didn't know anything about this feature could read/write +the filesystem without any chance of corrupting the filesystem (or even +making it inconsistent). This is essentially just a flag which says +"this filesystem has a (hidden) feature" that the kernel or e2fsck may +want to be aware of (more on e2fsck and feature flags later). The ext3 +HAS_JOURNAL feature is a COMPAT flag because the ext3 journal is simply +a regular file with data blocks in it so the kernel does not need to +take any special notice of it if it doesn't understand ext3 journaling. + +An RO_COMPAT flag indicates that the on-disk format is 100% compatible +with older on-disk formats for reading (i.e. the feature does not change +the visible on-disk format). However, an old kernel writing to such a +filesystem would/could corrupt the filesystem, so this is prevented. The +most common such feature, SPARSE_SUPER, is an RO_COMPAT feature because +sparse groups allow file data blocks where superblock/group descriptor +backups used to live, and ext2_free_blocks() refuses to free these blocks, +which would leading to inconsistent bitmaps. An old kernel would also +get an error if it tried to free a series of blocks which crossed a group +boundary, but this is a legitimate layout in a SPARSE_SUPER filesystem. + +An INCOMPAT flag indicates the on-disk format has changed in some +way that makes it unreadable by older kernels, or would otherwise +cause a problem if an old kernel tried to mount it. FILETYPE is an +INCOMPAT flag because older kernels would think a filename was longer +than 256 characters, which would lead to corrupt directory listings. +The COMPRESSION flag is an obvious INCOMPAT flag - if the kernel +doesn't understand compression, you would just get garbage back from +read() instead of it automatically decompressing your data. The ext3 +RECOVER flag is needed to prevent a kernel which does not understand the +ext3 journal from mounting the filesystem without replaying the journal. + +For e2fsck, it needs to be more strict with the handling of these +flags than the kernel. If it doesn't understand ANY of the COMPAT, +RO_COMPAT, or INCOMPAT flags it will refuse to check the filesystem, +because it has no way of verifying whether a given feature is valid +or not. Allowing e2fsck to succeed on a filesystem with an unknown +feature is a false sense of security for the user. Refusing to check +a filesystem with unknown features is a good incentive for the user to +update to the latest e2fsck. This also means that anyone adding feature +flags to ext2 also needs to update e2fsck to verify these features. + +Metadata +-------- + +It is frequently claimed that the ext2 implementation of writing +asynchronous metadata is faster than the ffs synchronous metadata +scheme but less reliable. Both methods are equally resolvable by their +respective fsck programs. + +If you're exceptionally paranoid, there are 3 ways of making metadata +writes synchronous on ext2: + +- per-file if you have the program source: use the O_SYNC flag to open() +- per-file if you don't have the source: use "chattr +S" on the file +- per-filesystem: add the "sync" option to mount (or in /etc/fstab) + +the first and last are not ext2 specific but do force the metadata to +be written synchronously. See also Journaling below. + +Limitations +----------- + +There are various limits imposed by the on-disk layout of ext2. Other +limits are imposed by the current implementation of the kernel code. +Many of the limits are determined at the time the filesystem is first +created, and depend upon the block size chosen. The ratio of inodes to +data blocks is fixed at filesystem creation time, so the only way to +increase the number of inodes is to increase the size of the filesystem. +No tools currently exist which can change the ratio of inodes to blocks. + +Most of these limits could be overcome with slight changes in the on-disk +format and using a compatibility flag to signal the format change (at +the expense of some compatibility). + +===================== ======= ======= ======= ======== +Filesystem block size 1kB 2kB 4kB 8kB +===================== ======= ======= ======= ======== +File size limit 16GB 256GB 2048GB 2048GB +Filesystem size limit 2047GB 8192GB 16384GB 32768GB +===================== ======= ======= ======= ======== + +There is a 2.4 kernel limit of 2048GB for a single block device, so no +filesystem larger than that can be created at this time. There is also +an upper limit on the block size imposed by the page size of the kernel, +so 8kB blocks are only allowed on Alpha systems (and other architectures +which support larger pages). + +There is an upper limit of 32000 subdirectories in a single directory. + +There is a "soft" upper limit of about 10-15k files in a single directory +with the current linear linked-list directory implementation. This limit +stems from performance problems when creating and deleting (and also +finding) files in such large directories. Using a hashed directory index +(under development) allows 100k-1M+ files in a single directory without +performance problems (although RAM size becomes an issue at this point). + +The (meaningless) absolute upper limit of files in a single directory +(imposed by the file size, the realistic limit is obviously much less) +is over 130 trillion files. It would be higher except there are not +enough 4-character names to make up unique directory entries, so they +have to be 8 character filenames, even then we are fairly close to +running out of unique filenames. + +Journaling +---------- + +A journaling extension to the ext2 code has been developed by Stephen +Tweedie. It avoids the risks of metadata corruption and the need to +wait for e2fsck to complete after a crash, without requiring a change +to the on-disk ext2 layout. In a nutshell, the journal is a regular +file which stores whole metadata (and optionally data) blocks that have +been modified, prior to writing them into the filesystem. This means +it is possible to add a journal to an existing ext2 filesystem without +the need for data conversion. + +When changes to the filesystem (e.g. a file is renamed) they are stored in +a transaction in the journal and can either be complete or incomplete at +the time of a crash. If a transaction is complete at the time of a crash +(or in the normal case where the system does not crash), then any blocks +in that transaction are guaranteed to represent a valid filesystem state, +and are copied into the filesystem. If a transaction is incomplete at +the time of the crash, then there is no guarantee of consistency for +the blocks in that transaction so they are discarded (which means any +filesystem changes they represent are also lost). +Check Documentation/filesystems/ext4/ if you want to read more about +ext4 and journaling. + +References +========== + +======================= =============================================== +The kernel source file:/usr/src/linux/fs/ext2/ +e2fsprogs (e2fsck) http://e2fsprogs.sourceforge.net/ +Design & Implementation http://e2fsprogs.sourceforge.net/ext2intro.html +Journaling (ext3) ftp://ftp.uk.linux.org/pub/linux/sct/fs/jfs/ +Filesystem Resizing http://ext2resize.sourceforge.net/ +Compression [1]_ http://e2compr.sourceforge.net/ +======================= =============================================== + +Implementations for: + +======================= =========================================================== +Windows 95/98/NT/2000 http://www.chrysocome.net/explore2fs +Windows 95 [1]_ http://www.yipton.net/content.html#FSDEXT2 +DOS client [1]_ ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/ +OS/2 [2]_ ftp://metalab.unc.edu/pub/Linux/system/filesystems/ext2/ +RISC OS client http://www.esw-heim.tu-clausthal.de/~marco/smorbrod/IscaFS/ +======================= =========================================================== + +.. [1] no longer actively developed/supported (as of Apr 2001) +.. [2] no longer actively developed/supported (as of Mar 2009) diff --git a/Documentation/filesystems/ext3.rst b/Documentation/filesystems/ext3.rst new file mode 100644 index 000000000..c06cec3a8 --- /dev/null +++ b/Documentation/filesystems/ext3.rst @@ -0,0 +1,14 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============== +Ext3 Filesystem +=============== + +Ext3 was originally released in September 1999. Written by Stephen Tweedie +for the 2.2 branch, and ported to 2.4 kernels by Peter Braam, Andreas Dilger, +Andrew Morton, Alexander Viro, Ted Ts'o and Stephen Tweedie. + +Ext3 is the ext2 filesystem enhanced with journalling capabilities. The +filesystem is a subset of ext4 filesystem so use ext4 driver for accessing +ext3 filesystems. + diff --git a/Documentation/filesystems/ext4/about.rst b/Documentation/filesystems/ext4/about.rst new file mode 100644 index 000000000..cc76b577d --- /dev/null +++ b/Documentation/filesystems/ext4/about.rst @@ -0,0 +1,44 @@ +.. SPDX-License-Identifier: GPL-2.0 + +About this Book +=============== + +This document attempts to describe the on-disk format for ext4 +filesystems. The same general ideas should apply to ext2/3 filesystems +as well, though they do not support all the features that ext4 supports, +and the fields will be shorter. + +**NOTE**: This is a work in progress, based on notes that the author +(djwong) made while picking apart a filesystem by hand. The data +structure definitions should be current as of Linux 4.18 and +e2fsprogs-1.44. All comments and corrections are welcome, since there is +undoubtedly plenty of lore that might not be reflected in freshly +created demonstration filesystems. + +License +------- +This book is licensed under the terms of the GNU Public License, v2. + +Terminology +----------- + +ext4 divides a storage device into an array of logical blocks both to +reduce bookkeeping overhead and to increase throughput by forcing larger +transfer sizes. Generally, the block size will be 4KiB (the same size as +pages on x86 and the block layer's default block size), though the +actual size is calculated as 2 ^ (10 + ``sb.s_log_block_size``) bytes. +Throughout this document, disk locations are given in terms of these +logical blocks, not raw LBAs, and not 1024-byte blocks. For the sake of +convenience, the logical block size will be referred to as +``$block_size`` throughout the rest of the document. + +When referenced in ``preformatted text`` blocks, ``sb`` refers to fields +in the super block, and ``inode`` refers to fields in an inode table +entry. + +Other References +---------------- + +Also see https://www.nongnu.org/ext2-doc/ for quite a collection of +information about ext2/3. Here's another old reference: +http://wiki.osdev.org/Ext2 diff --git a/Documentation/filesystems/ext4/allocators.rst b/Documentation/filesystems/ext4/allocators.rst new file mode 100644 index 000000000..7aa85152a --- /dev/null +++ b/Documentation/filesystems/ext4/allocators.rst @@ -0,0 +1,56 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Block and Inode Allocation Policy +--------------------------------- + +ext4 recognizes (better than ext3, anyway) that data locality is +generally a desirably quality of a filesystem. On a spinning disk, +keeping related blocks near each other reduces the amount of movement +that the head actuator and disk must perform to access a data block, +thus speeding up disk IO. On an SSD there of course are no moving parts, +but locality can increase the size of each transfer request while +reducing the total number of requests. This locality may also have the +effect of concentrating writes on a single erase block, which can speed +up file rewrites significantly. Therefore, it is useful to reduce +fragmentation whenever possible. + +The first tool that ext4 uses to combat fragmentation is the multi-block +allocator. When a file is first created, the block allocator +speculatively allocates 8KiB of disk space to the file on the assumption +that the space will get written soon. When the file is closed, the +unused speculative allocations are of course freed, but if the +speculation is correct (typically the case for full writes of small +files) then the file data gets written out in a single multi-block +extent. A second related trick that ext4 uses is delayed allocation. +Under this scheme, when a file needs more blocks to absorb file writes, +the filesystem defers deciding the exact placement on the disk until all +the dirty buffers are being written out to disk. By not committing to a +particular placement until it's absolutely necessary (the commit timeout +is hit, or sync() is called, or the kernel runs out of memory), the hope +is that the filesystem can make better location decisions. + +The third trick that ext4 (and ext3) uses is that it tries to keep a +file's data blocks in the same block group as its inode. This cuts down +on the seek penalty when the filesystem first has to read a file's inode +to learn where the file's data blocks live and then seek over to the +file's data blocks to begin I/O operations. + +The fourth trick is that all the inodes in a directory are placed in the +same block group as the directory, when feasible. The working assumption +here is that all the files in a directory might be related, therefore it +is useful to try to keep them all together. + +The fifth trick is that the disk volume is cut up into 128MB block +groups; these mini-containers are used as outlined above to try to +maintain data locality. However, there is a deliberate quirk -- when a +directory is created in the root directory, the inode allocator scans +the block groups and puts that directory into the least heavily loaded +block group that it can find. This encourages directories to spread out +over a disk; as the top-level directory/file blobs fill up one block +group, the allocators simply move on to the next block group. Allegedly +this scheme evens out the loading on the block groups, though the author +suspects that the directories which are so unlucky as to land towards +the end of a spinning drive get a raw deal performance-wise. + +Of course if all of these mechanisms fail, one can always use e4defrag +to defragment files. diff --git a/Documentation/filesystems/ext4/attributes.rst b/Documentation/filesystems/ext4/attributes.rst new file mode 100644 index 000000000..871d2da7a --- /dev/null +++ b/Documentation/filesystems/ext4/attributes.rst @@ -0,0 +1,191 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Extended Attributes +------------------- + +Extended attributes (xattrs) are typically stored in a separate data +block on the disk and referenced from inodes via ``inode.i_file_acl*``. +The first use of extended attributes seems to have been for storing file +ACLs and other security data (selinux). With the ``user_xattr`` mount +option it is possible for users to store extended attributes so long as +all attribute names begin with “user”; this restriction seems to have +disappeared as of Linux 3.0. + +There are two places where extended attributes can be found. The first +place is between the end of each inode entry and the beginning of the +next inode entry. For example, if inode.i\_extra\_isize = 28 and +sb.inode\_size = 256, then there are 256 - (128 + 28) = 100 bytes +available for in-inode extended attribute storage. The second place +where extended attributes can be found is in the block pointed to by +``inode.i_file_acl``. As of Linux 3.11, it is not possible for this +block to contain a pointer to a second extended attribute block (or even +the remaining blocks of a cluster). In theory it is possible for each +attribute's value to be stored in a separate data block, though as of +Linux 3.11 the code does not permit this. + +Keys are generally assumed to be ASCIIZ strings, whereas values can be +strings or binary data. + +Extended attributes, when stored after the inode, have a header +``ext4_xattr_ibody_header`` that is 4 bytes long: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Type + - Name + - Description + * - 0x0 + - \_\_le32 + - h\_magic + - Magic number for identification, 0xEA020000. This value is set by the + Linux driver, though e2fsprogs doesn't seem to check it(?) + +The beginning of an extended attribute block is in +``struct ext4_xattr_header``, which is 32 bytes long: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Type + - Name + - Description + * - 0x0 + - \_\_le32 + - h\_magic + - Magic number for identification, 0xEA020000. + * - 0x4 + - \_\_le32 + - h\_refcount + - Reference count. + * - 0x8 + - \_\_le32 + - h\_blocks + - Number of disk blocks used. + * - 0xC + - \_\_le32 + - h\_hash + - Hash value of all attributes. + * - 0x10 + - \_\_le32 + - h\_checksum + - Checksum of the extended attribute block. + * - 0x14 + - \_\_u32 + - h\_reserved[3] + - Zero. + +The checksum is calculated against the FS UUID, the 64-bit block number +of the extended attribute block, and the entire block (header + +entries). + +Following the ``struct ext4_xattr_header`` or +``struct ext4_xattr_ibody_header`` is an array of +``struct ext4_xattr_entry``; each of these entries is at least 16 bytes +long. When stored in an external block, the ``struct ext4_xattr_entry`` +entries must be stored in sorted order. The sort order is +``e_name_index``, then ``e_name_len``, and finally ``e_name``. +Attributes stored inside an inode do not need be stored in sorted order. + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Type + - Name + - Description + * - 0x0 + - \_\_u8 + - e\_name\_len + - Length of name. + * - 0x1 + - \_\_u8 + - e\_name\_index + - Attribute name index. There is a discussion of this below. + * - 0x2 + - \_\_le16 + - e\_value\_offs + - Location of this attribute's value on the disk block where it is stored. + Multiple attributes can share the same value. For an inode attribute + this value is relative to the start of the first entry; for a block this + value is relative to the start of the block (i.e. the header). + * - 0x4 + - \_\_le32 + - e\_value\_inum + - The inode where the value is stored. Zero indicates the value is in the + same block as this entry. This field is only used if the + INCOMPAT\_EA\_INODE feature is enabled. + * - 0x8 + - \_\_le32 + - e\_value\_size + - Length of attribute value. + * - 0xC + - \_\_le32 + - e\_hash + - Hash value of attribute name and attribute value. The kernel doesn't + update the hash for in-inode attributes, so for that case this value + must be zero, because e2fsck validates any non-zero hash regardless of + where the xattr lives. + * - 0x10 + - char + - e\_name[e\_name\_len] + - Attribute name. Does not include trailing NULL. + +Attribute values can follow the end of the entry table. There appears to +be a requirement that they be aligned to 4-byte boundaries. The values +are stored starting at the end of the block and grow towards the +xattr\_header/xattr\_entry table. When the two collide, the overflow is +put into a separate disk block. If the disk block fills up, the +filesystem returns -ENOSPC. + +The first four fields of the ``ext4_xattr_entry`` are set to zero to +mark the end of the key list. + +Attribute Name Indices +~~~~~~~~~~~~~~~~~~~~~~ + +Logically speaking, extended attributes are a series of key=value pairs. +The keys are assumed to be NULL-terminated strings. To reduce the amount +of on-disk space that the keys consume, the beginning of the key string +is matched against the attribute name index. If a match is found, the +attribute name index field is set, and matching string is removed from +the key name. Here is a map of name index values to key prefixes: + +.. list-table:: + :widths: 16 64 + :header-rows: 1 + + * - Name Index + - Key Prefix + * - 0 + - (no prefix) + * - 1 + - “user.” + * - 2 + - “system.posix\_acl\_access” + * - 3 + - “system.posix\_acl\_default” + * - 4 + - “trusted.” + * - 6 + - “security.” + * - 7 + - “system.” (inline\_data only?) + * - 8 + - “system.richacl” (SuSE kernels only?) + +For example, if the attribute key is “user.fubar”, the attribute name +index is set to 1 and the “fubar” name is recorded on disk. + +POSIX ACLs +~~~~~~~~~~ + +POSIX ACLs are stored in a reduced version of the Linux kernel (and +libacl's) internal ACL format. The key difference is that the version +number is different (1) and the ``e_id`` field is only stored for named +user and group ACLs. diff --git a/Documentation/filesystems/ext4/bigalloc.rst b/Documentation/filesystems/ext4/bigalloc.rst new file mode 100644 index 000000000..72075aa60 --- /dev/null +++ b/Documentation/filesystems/ext4/bigalloc.rst @@ -0,0 +1,34 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Bigalloc +-------- + +At the moment, the default size of a block is 4KiB, which is a commonly +supported page size on most MMU-capable hardware. This is fortunate, as +ext4 code is not prepared to handle the case where the block size +exceeds the page size. However, for a filesystem of mostly huge files, +it is desirable to be able to allocate disk blocks in units of multiple +blocks to reduce both fragmentation and metadata overhead. The +bigalloc feature provides exactly this ability. + +The bigalloc feature (EXT4_FEATURE_RO_COMPAT_BIGALLOC) changes ext4 to +use clustered allocation, so that each bit in the ext4 block allocation +bitmap addresses a power of two number of blocks. For example, if the +file system is mainly going to be storing large files in the 4-32 +megabyte range, it might make sense to set a cluster size of 1 megabyte. +This means that each bit in the block allocation bitmap now addresses +256 4k blocks. This shrinks the total size of the block allocation +bitmaps for a 2T file system from 64 megabytes to 256 kilobytes. It also +means that a block group addresses 32 gigabytes instead of 128 megabytes, +also shrinking the amount of file system overhead for metadata. + +The administrator can set a block cluster size at mkfs time (which is +stored in the s\_log\_cluster\_size field in the superblock); from then +on, the block bitmaps track clusters, not individual blocks. This means +that block groups can be several gigabytes in size (instead of just +128MiB); however, the minimum allocation unit becomes a cluster, not a +block, even for directories. TaoBao had a patchset to extend the “use +units of clusters instead of blocks” to the extent tree, though it is +not clear where those patches went-- they eventually morphed into +“extent tree v2” but that code has not landed as of May 2015. + diff --git a/Documentation/filesystems/ext4/bitmaps.rst b/Documentation/filesystems/ext4/bitmaps.rst new file mode 100644 index 000000000..c7546dbc1 --- /dev/null +++ b/Documentation/filesystems/ext4/bitmaps.rst @@ -0,0 +1,28 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Block and inode Bitmaps +----------------------- + +The data block bitmap tracks the usage of data blocks within the block +group. + +The inode bitmap records which entries in the inode table are in use. + +As with most bitmaps, one bit represents the usage status of one data +block or inode table entry. This implies a block group size of 8 \* +number\_of\_bytes\_in\_a\_logical\_block. + +NOTE: If ``BLOCK_UNINIT`` is set for a given block group, various parts +of the kernel and e2fsprogs code pretends that the block bitmap contains +zeros (i.e. all blocks in the group are free). However, it is not +necessarily the case that no blocks are in use -- if ``meta_bg`` is set, +the bitmaps and group descriptor live inside the group. Unfortunately, +ext2fs\_test\_block\_bitmap2() will return '0' for those locations, +which produces confusing debugfs output. + +Inode Table +----------- +Inode tables are statically allocated at mkfs time. Each block group +descriptor points to the start of the table, and the superblock records +the number of inodes per group. See the section on inodes for more +information. diff --git a/Documentation/filesystems/ext4/blockgroup.rst b/Documentation/filesystems/ext4/blockgroup.rst new file mode 100644 index 000000000..3da156633 --- /dev/null +++ b/Documentation/filesystems/ext4/blockgroup.rst @@ -0,0 +1,135 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Layout +------ + +The layout of a standard block group is approximately as follows (each +of these fields is discussed in a separate section below): + +.. list-table:: + :widths: 1 1 1 1 1 1 1 1 + :header-rows: 1 + + * - Group 0 Padding + - ext4 Super Block + - Group Descriptors + - Reserved GDT Blocks + - Data Block Bitmap + - inode Bitmap + - inode Table + - Data Blocks + * - 1024 bytes + - 1 block + - many blocks + - many blocks + - 1 block + - 1 block + - many blocks + - many more blocks + +For the special case of block group 0, the first 1024 bytes are unused, +to allow for the installation of x86 boot sectors and other oddities. +The superblock will start at offset 1024 bytes, whichever block that +happens to be (usually 0). However, if for some reason the block size = +1024, then block 0 is marked in use and the superblock goes in block 1. +For all other block groups, there is no padding. + +The ext4 driver primarily works with the superblock and the group +descriptors that are found in block group 0. Redundant copies of the +superblock and group descriptors are written to some of the block groups +across the disk in case the beginning of the disk gets trashed, though +not all block groups necessarily host a redundant copy (see following +paragraph for more details). If the group does not have a redundant +copy, the block group begins with the data block bitmap. Note also that +when the filesystem is freshly formatted, mkfs will allocate “reserve +GDT block” space after the block group descriptors and before the start +of the block bitmaps to allow for future expansion of the filesystem. By +default, a filesystem is allowed to increase in size by a factor of +1024x over the original filesystem size. + +The location of the inode table is given by ``grp.bg_inode_table_*``. It +is continuous range of blocks large enough to contain +``sb.s_inodes_per_group * sb.s_inode_size`` bytes. + +As for the ordering of items in a block group, it is generally +established that the super block and the group descriptor table, if +present, will be at the beginning of the block group. The bitmaps and +the inode table can be anywhere, and it is quite possible for the +bitmaps to come after the inode table, or for both to be in different +groups (flex\_bg). Leftover space is used for file data blocks, indirect +block maps, extent tree blocks, and extended attributes. + +Flexible Block Groups +--------------------- + +Starting in ext4, there is a new feature called flexible block groups +(flex\_bg). In a flex\_bg, several block groups are tied together as one +logical block group; the bitmap spaces and the inode table space in the +first block group of the flex\_bg are expanded to include the bitmaps +and inode tables of all other block groups in the flex\_bg. For example, +if the flex\_bg size is 4, then group 0 will contain (in order) the +superblock, group descriptors, data block bitmaps for groups 0-3, inode +bitmaps for groups 0-3, inode tables for groups 0-3, and the remaining +space in group 0 is for file data. The effect of this is to group the +block group metadata close together for faster loading, and to enable +large files to be continuous on disk. Backup copies of the superblock +and group descriptors are always at the beginning of block groups, even +if flex\_bg is enabled. The number of block groups that make up a +flex\_bg is given by 2 ^ ``sb.s_log_groups_per_flex``. + +Meta Block Groups +----------------- + +Without the option META\_BG, for safety concerns, all block group +descriptors copies are kept in the first block group. Given the default +128MiB(2^27 bytes) block group size and 64-byte group descriptors, ext4 +can have at most 2^27/64 = 2^21 block groups. This limits the entire +filesystem size to 2^21 ∗ 2^27 = 2^48bytes or 256TiB. + +The solution to this problem is to use the metablock group feature +(META\_BG), which is already in ext3 for all 2.6 releases. With the +META\_BG feature, ext4 filesystems are partitioned into many metablock +groups. Each metablock group is a cluster of block groups whose group +descriptor structures can be stored in a single disk block. For ext4 +filesystems with 4 KB block size, a single metablock group partition +includes 64 block groups, or 8 GiB of disk space. The metablock group +feature moves the location of the group descriptors from the congested +first block group of the whole filesystem into the first group of each +metablock group itself. The backups are in the second and last group of +each metablock group. This increases the 2^21 maximum block groups limit +to the hard limit 2^32, allowing support for a 512PiB filesystem. + +The change in the filesystem format replaces the current scheme where +the superblock is followed by a variable-length set of block group +descriptors. Instead, the superblock and a single block group descriptor +block is placed at the beginning of the first, second, and last block +groups in a meta-block group. A meta-block group is a collection of +block groups which can be described by a single block group descriptor +block. Since the size of the block group descriptor structure is 32 +bytes, a meta-block group contains 32 block groups for filesystems with +a 1KB block size, and 128 block groups for filesystems with a 4KB +blocksize. Filesystems can either be created using this new block group +descriptor layout, or existing filesystems can be resized on-line, and +the field s\_first\_meta\_bg in the superblock will indicate the first +block group using this new layout. + +Please see an important note about ``BLOCK_UNINIT`` in the section about +block and inode bitmaps. + +Lazy Block Group Initialization +------------------------------- + +A new feature for ext4 are three block group descriptor flags that +enable mkfs to skip initializing other parts of the block group +metadata. Specifically, the INODE\_UNINIT and BLOCK\_UNINIT flags mean +that the inode and block bitmaps for that group can be calculated and +therefore the on-disk bitmap blocks are not initialized. This is +generally the case for an empty block group or a block group containing +only fixed-location block group metadata. The INODE\_ZEROED flag means +that the inode table has been initialized; mkfs will unset this flag and +rely on the kernel to initialize the inode tables in the background. + +By not writing zeroes to the bitmaps and inode table, mkfs time is +reduced considerably. Note the feature flag is RO\_COMPAT\_GDT\_CSUM, +but the dumpe2fs output prints this as “uninit\_bg”. They are the same +thing. diff --git a/Documentation/filesystems/ext4/blockmap.rst b/Documentation/filesystems/ext4/blockmap.rst new file mode 100644 index 000000000..30e25750d --- /dev/null +++ b/Documentation/filesystems/ext4/blockmap.rst @@ -0,0 +1,49 @@ +.. SPDX-License-Identifier: GPL-2.0 + ++---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ +| i.i\_block Offset | Where It Points | ++=====================+==============================================================================================================================================================================================================================+ +| 0 to 11 | Direct map to file blocks 0 to 11. | ++---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ +| 12 | Indirect block: (file blocks 12 to (``$block_size`` / 4) + 11, or 12 to 1035 if 4KiB blocks) | +| | | +| | +------------------------------+--------------------------------------------------------------------+ | +| | | Indirect Block Offset | Where It Points | | +| | +==============================+====================================================================+ | +| | | 0 to (``$block_size`` / 4) | Direct map to (``$block_size`` / 4) blocks (1024 if 4KiB blocks) | | +| | +------------------------------+--------------------------------------------------------------------+ | ++---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ +| 13 | Double-indirect block: (file blocks ``$block_size``/4 + 12 to (``$block_size`` / 4) ^ 2 + (``$block_size`` / 4) + 11, or 1036 to 1049611 if 4KiB blocks) | +| | | +| | +--------------------------------+---------------------------------------------------------------------------------------------------------+ | +| | | Double Indirect Block Offset | Where It Points | | +| | +================================+=========================================================================================================+ | +| | | 0 to (``$block_size`` / 4) | Map to (``$block_size`` / 4) indirect blocks (1024 if 4KiB blocks) | | +| | | | | | +| | | | +------------------------------+--------------------------------------------------------------------+ | | +| | | | | Indirect Block Offset | Where It Points | | | +| | | | +==============================+====================================================================+ | | +| | | | | 0 to (``$block_size`` / 4) | Direct map to (``$block_size`` / 4) blocks (1024 if 4KiB blocks) | | | +| | | | +------------------------------+--------------------------------------------------------------------+ | | +| | +--------------------------------+---------------------------------------------------------------------------------------------------------+ | ++---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ +| 14 | Triple-indirect block: (file blocks (``$block_size`` / 4) ^ 2 + (``$block_size`` / 4) + 12 to (``$block_size`` / 4) ^ 3 + (``$block_size`` / 4) ^ 2 + (``$block_size`` / 4) + 12, or 1049612 to 1074791436 if 4KiB blocks) | +| | | +| | +--------------------------------+------------------------------------------------------------------------------------------------------------------------------------------------+ | +| | | Triple Indirect Block Offset | Where It Points | | +| | +================================+================================================================================================================================================+ | +| | | 0 to (``$block_size`` / 4) | Map to (``$block_size`` / 4) double indirect blocks (1024 if 4KiB blocks) | | +| | | | | | +| | | | +--------------------------------+---------------------------------------------------------------------------------------------------------+ | | +| | | | | Double Indirect Block Offset | Where It Points | | | +| | | | +================================+=========================================================================================================+ | | +| | | | | 0 to (``$block_size`` / 4) | Map to (``$block_size`` / 4) indirect blocks (1024 if 4KiB blocks) | | | +| | | | | | | | | +| | | | | | +------------------------------+--------------------------------------------------------------------+ | | | +| | | | | | | Indirect Block Offset | Where It Points | | | | +| | | | | | +==============================+====================================================================+ | | | +| | | | | | | 0 to (``$block_size`` / 4) | Direct map to (``$block_size`` / 4) blocks (1024 if 4KiB blocks) | | | | +| | | | | | +------------------------------+--------------------------------------------------------------------+ | | | +| | | | +--------------------------------+---------------------------------------------------------------------------------------------------------+ | | +| | +--------------------------------+------------------------------------------------------------------------------------------------------------------------------------------------+ | ++---------------------+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ diff --git a/Documentation/filesystems/ext4/blocks.rst b/Documentation/filesystems/ext4/blocks.rst new file mode 100644 index 000000000..bd722ecd9 --- /dev/null +++ b/Documentation/filesystems/ext4/blocks.rst @@ -0,0 +1,144 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Blocks +------ + +ext4 allocates storage space in units of “blocks”. A block is a group of +sectors between 1KiB and 64KiB, and the number of sectors must be an +integral power of 2. Blocks are in turn grouped into larger units called +block groups. Block size is specified at mkfs time and typically is +4KiB. You may experience mounting problems if block size is greater than +page size (i.e. 64KiB blocks on a i386 which only has 4KiB memory +pages). By default a filesystem can contain 2^32 blocks; if the '64bit' +feature is enabled, then a filesystem can have 2^64 blocks. The location +of structures is stored in terms of the block number the structure lives +in and not the absolute offset on disk. + +For 32-bit filesystems, limits are as follows: + +.. list-table:: + :widths: 1 1 1 1 1 + :header-rows: 1 + + * - Item + - 1KiB + - 2KiB + - 4KiB + - 64KiB + * - Blocks + - 2^32 + - 2^32 + - 2^32 + - 2^32 + * - Inodes + - 2^32 + - 2^32 + - 2^32 + - 2^32 + * - File System Size + - 4TiB + - 8TiB + - 16TiB + - 256PiB + * - Blocks Per Block Group + - 8,192 + - 16,384 + - 32,768 + - 524,288 + * - Inodes Per Block Group + - 8,192 + - 16,384 + - 32,768 + - 524,288 + * - Block Group Size + - 8MiB + - 32MiB + - 128MiB + - 32GiB + * - Blocks Per File, Extents + - 2^32 + - 2^32 + - 2^32 + - 2^32 + * - Blocks Per File, Block Maps + - 16,843,020 + - 134,480,396 + - 1,074,791,436 + - 4,398,314,962,956 (really 2^32 due to field size limitations) + * - File Size, Extents + - 4TiB + - 8TiB + - 16TiB + - 256TiB + * - File Size, Block Maps + - 16GiB + - 256GiB + - 4TiB + - 256TiB + +For 64-bit filesystems, limits are as follows: + +.. list-table:: + :widths: 1 1 1 1 1 + :header-rows: 1 + + * - Item + - 1KiB + - 2KiB + - 4KiB + - 64KiB + * - Blocks + - 2^64 + - 2^64 + - 2^64 + - 2^64 + * - Inodes + - 2^32 + - 2^32 + - 2^32 + - 2^32 + * - File System Size + - 16ZiB + - 32ZiB + - 64ZiB + - 1YiB + * - Blocks Per Block Group + - 8,192 + - 16,384 + - 32,768 + - 524,288 + * - Inodes Per Block Group + - 8,192 + - 16,384 + - 32,768 + - 524,288 + * - Block Group Size + - 8MiB + - 32MiB + - 128MiB + - 32GiB + * - Blocks Per File, Extents + - 2^32 + - 2^32 + - 2^32 + - 2^32 + * - Blocks Per File, Block Maps + - 16,843,020 + - 134,480,396 + - 1,074,791,436 + - 4,398,314,962,956 (really 2^32 due to field size limitations) + * - File Size, Extents + - 4TiB + - 8TiB + - 16TiB + - 256TiB + * - File Size, Block Maps + - 16GiB + - 256GiB + - 4TiB + - 256TiB + +Note: Files not using extents (i.e. files using block maps) must be +placed within the first 2^32 blocks of a filesystem. Files with extents +must be placed within the first 2^48 blocks of a filesystem. It's not +clear what happens with larger filesystems. diff --git a/Documentation/filesystems/ext4/checksums.rst b/Documentation/filesystems/ext4/checksums.rst new file mode 100644 index 000000000..5519e2538 --- /dev/null +++ b/Documentation/filesystems/ext4/checksums.rst @@ -0,0 +1,73 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Checksums +--------- + +Starting in early 2012, metadata checksums were added to all major ext4 +and jbd2 data structures. The associated feature flag is metadata\_csum. +The desired checksum algorithm is indicated in the superblock, though as +of October 2012 the only supported algorithm is crc32c. Some data +structures did not have space to fit a full 32-bit checksum, so only the +lower 16 bits are stored. Enabling the 64bit feature increases the data +structure size so that full 32-bit checksums can be stored for many data +structures. However, existing 32-bit filesystems cannot be extended to +enable 64bit mode, at least not without the experimental resize2fs +patches to do so. + +Existing filesystems can have checksumming added by running +``tune2fs -O metadata_csum`` against the underlying device. If tune2fs +encounters directory blocks that lack sufficient empty space to add a +checksum, it will request that you run ``e2fsck -D`` to have the +directories rebuilt with checksums. This has the added benefit of +removing slack space from the directory files and rebalancing the htree +indexes. If you \_ignore\_ this step, your directories will not be +protected by a checksum! + +The following table describes the data elements that go into each type +of checksum. The checksum function is whatever the superblock describes +(crc32c as of October 2013) unless noted otherwise. + +.. list-table:: + :widths: 20 8 50 + :header-rows: 1 + + * - Metadata + - Length + - Ingredients + * - Superblock + - \_\_le32 + - The entire superblock up to the checksum field. The UUID lives inside + the superblock. + * - MMP + - \_\_le32 + - UUID + the entire MMP block up to the checksum field. + * - Extended Attributes + - \_\_le32 + - UUID + the entire extended attribute block. The checksum field is set to + zero. + * - Directory Entries + - \_\_le32 + - UUID + inode number + inode generation + the directory block up to the + fake entry enclosing the checksum field. + * - HTREE Nodes + - \_\_le32 + - UUID + inode number + inode generation + all valid extents + HTREE tail. + The checksum field is set to zero. + * - Extents + - \_\_le32 + - UUID + inode number + inode generation + the entire extent block up to + the checksum field. + * - Bitmaps + - \_\_le32 or \_\_le16 + - UUID + the entire bitmap. Checksums are stored in the group descriptor, + and truncated if the group descriptor size is 32 bytes (i.e. ^64bit) + * - Inodes + - \_\_le32 + - UUID + inode number + inode generation + the entire inode. The checksum + field is set to zero. Each inode has its own checksum. + * - Group Descriptors + - \_\_le16 + - If metadata\_csum, then UUID + group number + the entire descriptor; + else if gdt\_csum, then crc16(UUID + group number + the entire + descriptor). In all cases, only the lower 16 bits are stored. + diff --git a/Documentation/filesystems/ext4/directory.rst b/Documentation/filesystems/ext4/directory.rst new file mode 100644 index 000000000..073940cc6 --- /dev/null +++ b/Documentation/filesystems/ext4/directory.rst @@ -0,0 +1,426 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Directory Entries +----------------- + +In an ext4 filesystem, a directory is more or less a flat file that maps +an arbitrary byte string (usually ASCII) to an inode number on the +filesystem. There can be many directory entries across the filesystem +that reference the same inode number--these are known as hard links, and +that is why hard links cannot reference files on other filesystems. As +such, directory entries are found by reading the data block(s) +associated with a directory file for the particular directory entry that +is desired. + +Linear (Classic) Directories +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +By default, each directory lists its entries in an “almost-linear” +array. I write “almost” because it's not a linear array in the memory +sense because directory entries are not split across filesystem blocks. +Therefore, it is more accurate to say that a directory is a series of +data blocks and that each block contains a linear array of directory +entries. The end of each per-block array is signified by reaching the +end of the block; the last entry in the block has a record length that +takes it all the way to the end of the block. The end of the entire +directory is of course signified by reaching the end of the file. Unused +directory entries are signified by inode = 0. By default the filesystem +uses ``struct ext4_dir_entry_2`` for directory entries unless the +“filetype” feature flag is not set, in which case it uses +``struct ext4_dir_entry``. + +The original directory entry format is ``struct ext4_dir_entry``, which +is at most 263 bytes long, though on disk you'll need to reference +``dirent.rec_len`` to know for sure. + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Size + - Name + - Description + * - 0x0 + - \_\_le32 + - inode + - Number of the inode that this directory entry points to. + * - 0x4 + - \_\_le16 + - rec\_len + - Length of this directory entry. Must be a multiple of 4. + * - 0x6 + - \_\_le16 + - name\_len + - Length of the file name. + * - 0x8 + - char + - name[EXT4\_NAME\_LEN] + - File name. + +Since file names cannot be longer than 255 bytes, the new directory +entry format shortens the name\_len field and uses the space for a file +type flag, probably to avoid having to load every inode during directory +tree traversal. This format is ``ext4_dir_entry_2``, which is at most +263 bytes long, though on disk you'll need to reference +``dirent.rec_len`` to know for sure. + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Size + - Name + - Description + * - 0x0 + - \_\_le32 + - inode + - Number of the inode that this directory entry points to. + * - 0x4 + - \_\_le16 + - rec\_len + - Length of this directory entry. + * - 0x6 + - \_\_u8 + - name\_len + - Length of the file name. + * - 0x7 + - \_\_u8 + - file\_type + - File type code, see ftype_ table below. + * - 0x8 + - char + - name[EXT4\_NAME\_LEN] + - File name. + +.. _ftype: + +The directory file type is one of the following values: + +.. list-table:: + :widths: 16 64 + :header-rows: 1 + + * - Value + - Description + * - 0x0 + - Unknown. + * - 0x1 + - Regular file. + * - 0x2 + - Directory. + * - 0x3 + - Character device file. + * - 0x4 + - Block device file. + * - 0x5 + - FIFO. + * - 0x6 + - Socket. + * - 0x7 + - Symbolic link. + +In order to add checksums to these classic directory blocks, a phony +``struct ext4_dir_entry`` is placed at the end of each leaf block to +hold the checksum. The directory entry is 12 bytes long. The inode +number and name\_len fields are set to zero to fool old software into +ignoring an apparently empty directory entry, and the checksum is stored +in the place where the name normally goes. The structure is +``struct ext4_dir_entry_tail``: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Size + - Name + - Description + * - 0x0 + - \_\_le32 + - det\_reserved\_zero1 + - Inode number, which must be zero. + * - 0x4 + - \_\_le16 + - det\_rec\_len + - Length of this directory entry, which must be 12. + * - 0x6 + - \_\_u8 + - det\_reserved\_zero2 + - Length of the file name, which must be zero. + * - 0x7 + - \_\_u8 + - det\_reserved\_ft + - File type, which must be 0xDE. + * - 0x8 + - \_\_le32 + - det\_checksum + - Directory leaf block checksum. + +The leaf directory block checksum is calculated against the FS UUID, the +directory's inode number, the directory's inode generation number, and +the entire directory entry block up to (but not including) the fake +directory entry. + +Hash Tree Directories +~~~~~~~~~~~~~~~~~~~~~ + +A linear array of directory entries isn't great for performance, so a +new feature was added to ext3 to provide a faster (but peculiar) +balanced tree keyed off a hash of the directory entry name. If the +EXT4\_INDEX\_FL (0x1000) flag is set in the inode, this directory uses a +hashed btree (htree) to organize and find directory entries. For +backwards read-only compatibility with ext2, this tree is actually +hidden inside the directory file, masquerading as “empty” directory data +blocks! It was stated previously that the end of the linear directory +entry table was signified with an entry pointing to inode 0; this is +(ab)used to fool the old linear-scan algorithm into thinking that the +rest of the directory block is empty so that it moves on. + +The root of the tree always lives in the first data block of the +directory. By ext2 custom, the '.' and '..' entries must appear at the +beginning of this first block, so they are put here as two +``struct ext4_dir_entry_2``\ s and not stored in the tree. The rest of +the root node contains metadata about the tree and finally a hash->block +map to find nodes that are lower in the htree. If +``dx_root.info.indirect_levels`` is non-zero then the htree has two +levels; the data block pointed to by the root node's map is an interior +node, which is indexed by a minor hash. Interior nodes in this tree +contains a zeroed out ``struct ext4_dir_entry_2`` followed by a +minor\_hash->block map to find leafe nodes. Leaf nodes contain a linear +array of all ``struct ext4_dir_entry_2``; all of these entries +(presumably) hash to the same value. If there is an overflow, the +entries simply overflow into the next leaf node, and the +least-significant bit of the hash (in the interior node map) that gets +us to this next leaf node is set. + +To traverse the directory as a htree, the code calculates the hash of +the desired file name and uses it to find the corresponding block +number. If the tree is flat, the block is a linear array of directory +entries that can be searched; otherwise, the minor hash of the file name +is computed and used against this second block to find the corresponding +third block number. That third block number will be a linear array of +directory entries. + +To traverse the directory as a linear array (such as the old code does), +the code simply reads every data block in the directory. The blocks used +for the htree will appear to have no entries (aside from '.' and '..') +and so only the leaf nodes will appear to have any interesting content. + +The root of the htree is in ``struct dx_root``, which is the full length +of a data block: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Type + - Name + - Description + * - 0x0 + - \_\_le32 + - dot.inode + - inode number of this directory. + * - 0x4 + - \_\_le16 + - dot.rec\_len + - Length of this record, 12. + * - 0x6 + - u8 + - dot.name\_len + - Length of the name, 1. + * - 0x7 + - u8 + - dot.file\_type + - File type of this entry, 0x2 (directory) (if the feature flag is set). + * - 0x8 + - char + - dot.name[4] + - “.\\0\\0\\0” + * - 0xC + - \_\_le32 + - dotdot.inode + - inode number of parent directory. + * - 0x10 + - \_\_le16 + - dotdot.rec\_len + - block\_size - 12. The record length is long enough to cover all htree + data. + * - 0x12 + - u8 + - dotdot.name\_len + - Length of the name, 2. + * - 0x13 + - u8 + - dotdot.file\_type + - File type of this entry, 0x2 (directory) (if the feature flag is set). + * - 0x14 + - char + - dotdot\_name[4] + - “..\\0\\0” + * - 0x18 + - \_\_le32 + - struct dx\_root\_info.reserved\_zero + - Zero. + * - 0x1C + - u8 + - struct dx\_root\_info.hash\_version + - Hash type, see dirhash_ table below. + * - 0x1D + - u8 + - struct dx\_root\_info.info\_length + - Length of the tree information, 0x8. + * - 0x1E + - u8 + - struct dx\_root\_info.indirect\_levels + - Depth of the htree. Cannot be larger than 3 if the INCOMPAT\_LARGEDIR + feature is set; cannot be larger than 2 otherwise. + * - 0x1F + - u8 + - struct dx\_root\_info.unused\_flags + - + * - 0x20 + - \_\_le16 + - limit + - Maximum number of dx\_entries that can follow this header, plus 1 for + the header itself. + * - 0x22 + - \_\_le16 + - count + - Actual number of dx\_entries that follow this header, plus 1 for the + header itself. + * - 0x24 + - \_\_le32 + - block + - The block number (within the directory file) that goes with hash=0. + * - 0x28 + - struct dx\_entry + - entries[0] + - As many 8-byte ``struct dx_entry`` as fits in the rest of the data block. + +.. _dirhash: + +The directory hash is one of the following values: + +.. list-table:: + :widths: 16 64 + :header-rows: 1 + + * - Value + - Description + * - 0x0 + - Legacy. + * - 0x1 + - Half MD4. + * - 0x2 + - Tea. + * - 0x3 + - Legacy, unsigned. + * - 0x4 + - Half MD4, unsigned. + * - 0x5 + - Tea, unsigned. + +Interior nodes of an htree are recorded as ``struct dx_node``, which is +also the full length of a data block: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Type + - Name + - Description + * - 0x0 + - \_\_le32 + - fake.inode + - Zero, to make it look like this entry is not in use. + * - 0x4 + - \_\_le16 + - fake.rec\_len + - The size of the block, in order to hide all of the dx\_node data. + * - 0x6 + - u8 + - name\_len + - Zero. There is no name for this “unused” directory entry. + * - 0x7 + - u8 + - file\_type + - Zero. There is no file type for this “unused” directory entry. + * - 0x8 + - \_\_le16 + - limit + - Maximum number of dx\_entries that can follow this header, plus 1 for + the header itself. + * - 0xA + - \_\_le16 + - count + - Actual number of dx\_entries that follow this header, plus 1 for the + header itself. + * - 0xE + - \_\_le32 + - block + - The block number (within the directory file) that goes with the lowest + hash value of this block. This value is stored in the parent block. + * - 0x12 + - struct dx\_entry + - entries[0] + - As many 8-byte ``struct dx_entry`` as fits in the rest of the data block. + +The hash maps that exist in both ``struct dx_root`` and +``struct dx_node`` are recorded as ``struct dx_entry``, which is 8 bytes +long: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Type + - Name + - Description + * - 0x0 + - \_\_le32 + - hash + - Hash code. + * - 0x4 + - \_\_le32 + - block + - Block number (within the directory file, not filesystem blocks) of the + next node in the htree. + +(If you think this is all quite clever and peculiar, so does the +author.) + +If metadata checksums are enabled, the last 8 bytes of the directory +block (precisely the length of one dx\_entry) are used to store a +``struct dx_tail``, which contains the checksum. The ``limit`` and +``count`` entries in the dx\_root/dx\_node structures are adjusted as +necessary to fit the dx\_tail into the block. If there is no space for +the dx\_tail, the user is notified to run e2fsck -D to rebuild the +directory index (which will ensure that there's space for the checksum. +The dx\_tail structure is 8 bytes long and looks like this: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Type + - Name + - Description + * - 0x0 + - u32 + - dt\_reserved + - Zero. + * - 0x4 + - \_\_le32 + - dt\_checksum + - Checksum of the htree directory block. + +The checksum is calculated against the FS UUID, the htree index header +(dx\_root or dx\_node), all of the htree indices (dx\_entry) that are in +use, and the tail block (dx\_tail). diff --git a/Documentation/filesystems/ext4/dynamic.rst b/Documentation/filesystems/ext4/dynamic.rst new file mode 100644 index 000000000..bb0c84333 --- /dev/null +++ b/Documentation/filesystems/ext4/dynamic.rst @@ -0,0 +1,12 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Dynamic Structures +================== + +Dynamic metadata are created on the fly when files and blocks are +allocated to files. + +.. include:: inodes.rst +.. include:: ifork.rst +.. include:: directory.rst +.. include:: attributes.rst diff --git a/Documentation/filesystems/ext4/eainode.rst b/Documentation/filesystems/ext4/eainode.rst new file mode 100644 index 000000000..ecc0d01a0 --- /dev/null +++ b/Documentation/filesystems/ext4/eainode.rst @@ -0,0 +1,18 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Large Extended Attribute Values +------------------------------- + +To enable ext4 to store extended attribute values that do not fit in the +inode or in the single extended attribute block attached to an inode, +the EA\_INODE feature allows us to store the value in the data blocks of +a regular file inode. This “EA inode” is linked only from the extended +attribute name index and must not appear in a directory entry. The +inode's i\_atime field is used to store a checksum of the xattr value; +and i\_ctime/i\_version store a 64-bit reference count, which enables +sharing of large xattr values between multiple owning inodes. For +backward compatibility with older versions of this feature, the +i\_mtime/i\_generation *may* store a back-reference to the inode number +and i\_generation of the **one** owning inode (in cases where the EA +inode is not referenced by multiple inodes) to verify that the EA inode +is the correct one being accessed. diff --git a/Documentation/filesystems/ext4/globals.rst b/Documentation/filesystems/ext4/globals.rst new file mode 100644 index 000000000..368bf7662 --- /dev/null +++ b/Documentation/filesystems/ext4/globals.rst @@ -0,0 +1,13 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Global Structures +================= + +The filesystem is sharded into a number of block groups, each of which +have static metadata at fixed locations. + +.. include:: super.rst +.. include:: group_descr.rst +.. include:: bitmaps.rst +.. include:: mmp.rst +.. include:: journal.rst diff --git a/Documentation/filesystems/ext4/group_descr.rst b/Documentation/filesystems/ext4/group_descr.rst new file mode 100644 index 000000000..7ba6114e7 --- /dev/null +++ b/Documentation/filesystems/ext4/group_descr.rst @@ -0,0 +1,173 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Block Group Descriptors +----------------------- + +Each block group on the filesystem has one of these descriptors +associated with it. As noted in the Layout section above, the group +descriptors (if present) are the second item in the block group. The +standard configuration is for each block group to contain a full copy of +the block group descriptor table unless the sparse\_super feature flag +is set. + +Notice how the group descriptor records the location of both bitmaps and +the inode table (i.e. they can float). This means that within a block +group, the only data structures with fixed locations are the superblock +and the group descriptor table. The flex\_bg mechanism uses this +property to group several block groups into a flex group and lay out all +of the groups' bitmaps and inode tables into one long run in the first +group of the flex group. + +If the meta\_bg feature flag is set, then several block groups are +grouped together into a meta group. Note that in the meta\_bg case, +however, the first and last two block groups within the larger meta +group contain only group descriptors for the groups inside the meta +group. + +flex\_bg and meta\_bg do not appear to be mutually exclusive features. + +In ext2, ext3, and ext4 (when the 64bit feature is not enabled), the +block group descriptor was only 32 bytes long and therefore ends at +bg\_checksum. On an ext4 filesystem with the 64bit feature enabled, the +block group descriptor expands to at least the 64 bytes described below; +the size is stored in the superblock. + +If gdt\_csum is set and metadata\_csum is not set, the block group +checksum is the crc16 of the FS UUID, the group number, and the group +descriptor structure. If metadata\_csum is set, then the block group +checksum is the lower 16 bits of the checksum of the FS UUID, the group +number, and the group descriptor structure. Both block and inode bitmap +checksums are calculated against the FS UUID, the group number, and the +entire bitmap. + +The block group descriptor is laid out in ``struct ext4_group_desc``. + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Size + - Name + - Description + * - 0x0 + - \_\_le32 + - bg\_block\_bitmap\_lo + - Lower 32-bits of location of block bitmap. + * - 0x4 + - \_\_le32 + - bg\_inode\_bitmap\_lo + - Lower 32-bits of location of inode bitmap. + * - 0x8 + - \_\_le32 + - bg\_inode\_table\_lo + - Lower 32-bits of location of inode table. + * - 0xC + - \_\_le16 + - bg\_free\_blocks\_count\_lo + - Lower 16-bits of free block count. + * - 0xE + - \_\_le16 + - bg\_free\_inodes\_count\_lo + - Lower 16-bits of free inode count. + * - 0x10 + - \_\_le16 + - bg\_used\_dirs\_count\_lo + - Lower 16-bits of directory count. + * - 0x12 + - \_\_le16 + - bg\_flags + - Block group flags. See the bgflags_ table below. + * - 0x14 + - \_\_le32 + - bg\_exclude\_bitmap\_lo + - Lower 32-bits of location of snapshot exclusion bitmap. + * - 0x18 + - \_\_le16 + - bg\_block\_bitmap\_csum\_lo + - Lower 16-bits of the block bitmap checksum. + * - 0x1A + - \_\_le16 + - bg\_inode\_bitmap\_csum\_lo + - Lower 16-bits of the inode bitmap checksum. + * - 0x1C + - \_\_le16 + - bg\_itable\_unused\_lo + - Lower 16-bits of unused inode count. If set, we needn't scan past the + ``(sb.s_inodes_per_group - gdt.bg_itable_unused)``\ th entry in the + inode table for this group. + * - 0x1E + - \_\_le16 + - bg\_checksum + - Group descriptor checksum; crc16(sb\_uuid+group\_num+bg\_desc) if the + RO\_COMPAT\_GDT\_CSUM feature is set, or + crc32c(sb\_uuid+group\_num+bg\_desc) & 0xFFFF if the + RO\_COMPAT\_METADATA\_CSUM feature is set. The bg\_checksum + field in bg\_desc is skipped when calculating crc16 checksum, + and set to zero if crc32c checksum is used. + * - + - + - + - These fields only exist if the 64bit feature is enabled and s_desc_size + > 32. + * - 0x20 + - \_\_le32 + - bg\_block\_bitmap\_hi + - Upper 32-bits of location of block bitmap. + * - 0x24 + - \_\_le32 + - bg\_inode\_bitmap\_hi + - Upper 32-bits of location of inodes bitmap. + * - 0x28 + - \_\_le32 + - bg\_inode\_table\_hi + - Upper 32-bits of location of inodes table. + * - 0x2C + - \_\_le16 + - bg\_free\_blocks\_count\_hi + - Upper 16-bits of free block count. + * - 0x2E + - \_\_le16 + - bg\_free\_inodes\_count\_hi + - Upper 16-bits of free inode count. + * - 0x30 + - \_\_le16 + - bg\_used\_dirs\_count\_hi + - Upper 16-bits of directory count. + * - 0x32 + - \_\_le16 + - bg\_itable\_unused\_hi + - Upper 16-bits of unused inode count. + * - 0x34 + - \_\_le32 + - bg\_exclude\_bitmap\_hi + - Upper 32-bits of location of snapshot exclusion bitmap. + * - 0x38 + - \_\_le16 + - bg\_block\_bitmap\_csum\_hi + - Upper 16-bits of the block bitmap checksum. + * - 0x3A + - \_\_le16 + - bg\_inode\_bitmap\_csum\_hi + - Upper 16-bits of the inode bitmap checksum. + * - 0x3C + - \_\_u32 + - bg\_reserved + - Padding to 64 bytes. + +.. _bgflags: + +Block group flags can be any combination of the following: + +.. list-table:: + :widths: 16 64 + :header-rows: 1 + + * - Value + - Description + * - 0x1 + - inode table and bitmap are not initialized (EXT4\_BG\_INODE\_UNINIT). + * - 0x2 + - block bitmap is not initialized (EXT4\_BG\_BLOCK\_UNINIT). + * - 0x4 + - inode table is zeroed (EXT4\_BG\_INODE\_ZEROED). diff --git a/Documentation/filesystems/ext4/ifork.rst b/Documentation/filesystems/ext4/ifork.rst new file mode 100644 index 000000000..b9816d5a8 --- /dev/null +++ b/Documentation/filesystems/ext4/ifork.rst @@ -0,0 +1,194 @@ +.. SPDX-License-Identifier: GPL-2.0 + +The Contents of inode.i\_block +------------------------------ + +Depending on the type of file an inode describes, the 60 bytes of +storage in ``inode.i_block`` can be used in different ways. In general, +regular files and directories will use it for file block indexing +information, and special files will use it for special purposes. + +Symbolic Links +~~~~~~~~~~~~~~ + +The target of a symbolic link will be stored in this field if the target +string is less than 60 bytes long. Otherwise, either extents or block +maps will be used to allocate data blocks to store the link target. + +Direct/Indirect Block Addressing +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +In ext2/3, file block numbers were mapped to logical block numbers by +means of an (up to) three level 1-1 block map. To find the logical block +that stores a particular file block, the code would navigate through +this increasingly complicated structure. Notice that there is neither a +magic number nor a checksum to provide any level of confidence that the +block isn't full of garbage. + +.. ifconfig:: builder != 'latex' + + .. include:: blockmap.rst + +.. ifconfig:: builder == 'latex' + + [Table omitted because LaTeX doesn't support nested tables.] + +Note that with this block mapping scheme, it is necessary to fill out a +lot of mapping data even for a large contiguous file! This inefficiency +led to the creation of the extent mapping scheme, discussed below. + +Notice also that a file using this mapping scheme cannot be placed +higher than 2^32 blocks. + +Extent Tree +~~~~~~~~~~~ + +In ext4, the file to logical block map has been replaced with an extent +tree. Under the old scheme, allocating a contiguous run of 1,000 blocks +requires an indirect block to map all 1,000 entries; with extents, the +mapping is reduced to a single ``struct ext4_extent`` with +``ee_len = 1000``. If flex\_bg is enabled, it is possible to allocate +very large files with a single extent, at a considerable reduction in +metadata block use, and some improvement in disk efficiency. The inode +must have the extents flag (0x80000) flag set for this feature to be in +use. + +Extents are arranged as a tree. Each node of the tree begins with a +``struct ext4_extent_header``. If the node is an interior node +(``eh.eh_depth`` > 0), the header is followed by ``eh.eh_entries`` +instances of ``struct ext4_extent_idx``; each of these index entries +points to a block containing more nodes in the extent tree. If the node +is a leaf node (``eh.eh_depth == 0``), then the header is followed by +``eh.eh_entries`` instances of ``struct ext4_extent``; these instances +point to the file's data blocks. The root node of the extent tree is +stored in ``inode.i_block``, which allows for the first four extents to +be recorded without the use of extra metadata blocks. + +The extent tree header is recorded in ``struct ext4_extent_header``, +which is 12 bytes long: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Size + - Name + - Description + * - 0x0 + - \_\_le16 + - eh\_magic + - Magic number, 0xF30A. + * - 0x2 + - \_\_le16 + - eh\_entries + - Number of valid entries following the header. + * - 0x4 + - \_\_le16 + - eh\_max + - Maximum number of entries that could follow the header. + * - 0x6 + - \_\_le16 + - eh\_depth + - Depth of this extent node in the extent tree. 0 = this extent node + points to data blocks; otherwise, this extent node points to other + extent nodes. The extent tree can be at most 5 levels deep: a logical + block number can be at most ``2^32``, and the smallest ``n`` that + satisfies ``4*(((blocksize - 12)/12)^n) >= 2^32`` is 5. + * - 0x8 + - \_\_le32 + - eh\_generation + - Generation of the tree. (Used by Lustre, but not standard ext4). + +Internal nodes of the extent tree, also known as index nodes, are +recorded as ``struct ext4_extent_idx``, and are 12 bytes long: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Size + - Name + - Description + * - 0x0 + - \_\_le32 + - ei\_block + - This index node covers file blocks from 'block' onward. + * - 0x4 + - \_\_le32 + - ei\_leaf\_lo + - Lower 32-bits of the block number of the extent node that is the next + level lower in the tree. The tree node pointed to can be either another + internal node or a leaf node, described below. + * - 0x8 + - \_\_le16 + - ei\_leaf\_hi + - Upper 16-bits of the previous field. + * - 0xA + - \_\_u16 + - ei\_unused + - + +Leaf nodes of the extent tree are recorded as ``struct ext4_extent``, +and are also 12 bytes long: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Size + - Name + - Description + * - 0x0 + - \_\_le32 + - ee\_block + - First file block number that this extent covers. + * - 0x4 + - \_\_le16 + - ee\_len + - Number of blocks covered by extent. If the value of this field is <= + 32768, the extent is initialized. If the value of the field is > 32768, + the extent is uninitialized and the actual extent length is ``ee_len`` - + 32768. Therefore, the maximum length of a initialized extent is 32768 + blocks, and the maximum length of an uninitialized extent is 32767. + * - 0x6 + - \_\_le16 + - ee\_start\_hi + - Upper 16-bits of the block number to which this extent points. + * - 0x8 + - \_\_le32 + - ee\_start\_lo + - Lower 32-bits of the block number to which this extent points. + +Prior to the introduction of metadata checksums, the extent header + +extent entries always left at least 4 bytes of unallocated space at the +end of each extent tree data block (because (2^x % 12) >= 4). Therefore, +the 32-bit checksum is inserted into this space. The 4 extents in the +inode do not need checksumming, since the inode is already checksummed. +The checksum is calculated against the FS UUID, the inode number, the +inode generation, and the entire extent block leading up to (but not +including) the checksum itself. + +``struct ext4_extent_tail`` is 4 bytes long: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Size + - Name + - Description + * - 0x0 + - \_\_le32 + - eb\_checksum + - Checksum of the extent block, crc32c(uuid+inum+igeneration+extentblock) + +Inline Data +~~~~~~~~~~~ + +If the inline data feature is enabled for the filesystem and the flag is +set for the inode, it is possible that the first 60 bytes of the file +data are stored here. diff --git a/Documentation/filesystems/ext4/index.rst b/Documentation/filesystems/ext4/index.rst new file mode 100644 index 000000000..705d813d5 --- /dev/null +++ b/Documentation/filesystems/ext4/index.rst @@ -0,0 +1,14 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================================== +ext4 Data Structures and Algorithms +=================================== + +.. toctree:: + :maxdepth: 6 + :numbered: + + about + overview + globals + dynamic diff --git a/Documentation/filesystems/ext4/inlinedata.rst b/Documentation/filesystems/ext4/inlinedata.rst new file mode 100644 index 000000000..d1075178c --- /dev/null +++ b/Documentation/filesystems/ext4/inlinedata.rst @@ -0,0 +1,37 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Inline Data +----------- + +The inline data feature was designed to handle the case that a file's +data is so tiny that it readily fits inside the inode, which +(theoretically) reduces disk block consumption and reduces seeks. If the +file is smaller than 60 bytes, then the data are stored inline in +``inode.i_block``. If the rest of the file would fit inside the extended +attribute space, then it might be found as an extended attribute +“system.data” within the inode body (“ibody EA”). This of course +constrains the amount of extended attributes one can attach to an inode. +If the data size increases beyond i\_block + ibody EA, a regular block +is allocated and the contents moved to that block. + +Pending a change to compact the extended attribute key used to store +inline data, one ought to be able to store 160 bytes of data in a +256-byte inode (as of June 2015, when i\_extra\_isize is 28). Prior to +that, the limit was 156 bytes due to inefficient use of inode space. + +The inline data feature requires the presence of an extended attribute +for “system.data”, even if the attribute value is zero length. + +Inline Directories +~~~~~~~~~~~~~~~~~~ + +The first four bytes of i\_block are the inode number of the parent +directory. Following that is a 56-byte space for an array of directory +entries; see ``struct ext4_dir_entry``. If there is a “system.data” +attribute in the inode body, the EA value is an array of +``struct ext4_dir_entry`` as well. Note that for inline directories, the +i\_block and EA space are treated as separate dirent blocks; directory +entries cannot span the two. + +Inline directory entries are not checksummed, as the inode checksum +should protect all inline data contents. diff --git a/Documentation/filesystems/ext4/inodes.rst b/Documentation/filesystems/ext4/inodes.rst new file mode 100644 index 000000000..a65baffb4 --- /dev/null +++ b/Documentation/filesystems/ext4/inodes.rst @@ -0,0 +1,578 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Index Nodes +----------- + +In a regular UNIX filesystem, the inode stores all the metadata +pertaining to the file (time stamps, block maps, extended attributes, +etc), not the directory entry. To find the information associated with a +file, one must traverse the directory files to find the directory entry +associated with a file, then load the inode to find the metadata for +that file. ext4 appears to cheat (for performance reasons) a little bit +by storing a copy of the file type (normally stored in the inode) in the +directory entry. (Compare all this to FAT, which stores all the file +information directly in the directory entry, but does not support hard +links and is in general more seek-happy than ext4 due to its simpler +block allocator and extensive use of linked lists.) + +The inode table is a linear array of ``struct ext4_inode``. The table is +sized to have enough blocks to store at least +``sb.s_inode_size * sb.s_inodes_per_group`` bytes. The number of the +block group containing an inode can be calculated as +``(inode_number - 1) / sb.s_inodes_per_group``, and the offset into the +group's table is ``(inode_number - 1) % sb.s_inodes_per_group``. There +is no inode 0. + +The inode checksum is calculated against the FS UUID, the inode number, +and the inode structure itself. + +The inode table entry is laid out in ``struct ext4_inode``. + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + :class: longtable + + * - Offset + - Size + - Name + - Description + * - 0x0 + - \_\_le16 + - i\_mode + - File mode. See the table i_mode_ below. + * - 0x2 + - \_\_le16 + - i\_uid + - Lower 16-bits of Owner UID. + * - 0x4 + - \_\_le32 + - i\_size\_lo + - Lower 32-bits of size in bytes. + * - 0x8 + - \_\_le32 + - i\_atime + - Last access time, in seconds since the epoch. However, if the EA\_INODE + inode flag is set, this inode stores an extended attribute value and + this field contains the checksum of the value. + * - 0xC + - \_\_le32 + - i\_ctime + - Last inode change time, in seconds since the epoch. However, if the + EA\_INODE inode flag is set, this inode stores an extended attribute + value and this field contains the lower 32 bits of the attribute value's + reference count. + * - 0x10 + - \_\_le32 + - i\_mtime + - Last data modification time, in seconds since the epoch. However, if the + EA\_INODE inode flag is set, this inode stores an extended attribute + value and this field contains the number of the inode that owns the + extended attribute. + * - 0x14 + - \_\_le32 + - i\_dtime + - Deletion Time, in seconds since the epoch. + * - 0x18 + - \_\_le16 + - i\_gid + - Lower 16-bits of GID. + * - 0x1A + - \_\_le16 + - i\_links\_count + - Hard link count. Normally, ext4 does not permit an inode to have more + than 65,000 hard links. This applies to files as well as directories, + which means that there cannot be more than 64,998 subdirectories in a + directory (each subdirectory's '..' entry counts as a hard link, as does + the '.' entry in the directory itself). With the DIR\_NLINK feature + enabled, ext4 supports more than 64,998 subdirectories by setting this + field to 1 to indicate that the number of hard links is not known. + * - 0x1C + - \_\_le32 + - i\_blocks\_lo + - Lower 32-bits of “block” count. If the huge\_file feature flag is not + set on the filesystem, the file consumes ``i_blocks_lo`` 512-byte blocks + on disk. If huge\_file is set and EXT4\_HUGE\_FILE\_FL is NOT set in + ``inode.i_flags``, then the file consumes ``i_blocks_lo + (i_blocks_hi + << 32)`` 512-byte blocks on disk. If huge\_file is set and + EXT4\_HUGE\_FILE\_FL IS set in ``inode.i_flags``, then this file + consumes (``i_blocks_lo + i_blocks_hi`` << 32) filesystem blocks on + disk. + * - 0x20 + - \_\_le32 + - i\_flags + - Inode flags. See the table i_flags_ below. + * - 0x24 + - 4 bytes + - i\_osd1 + - See the table i_osd1_ for more details. + * - 0x28 + - 60 bytes + - i\_block[EXT4\_N\_BLOCKS=15] + - Block map or extent tree. See the section “The Contents of inode.i\_block”. + * - 0x64 + - \_\_le32 + - i\_generation + - File version (for NFS). + * - 0x68 + - \_\_le32 + - i\_file\_acl\_lo + - Lower 32-bits of extended attribute block. ACLs are of course one of + many possible extended attributes; I think the name of this field is a + result of the first use of extended attributes being for ACLs. + * - 0x6C + - \_\_le32 + - i\_size\_high / i\_dir\_acl + - Upper 32-bits of file/directory size. In ext2/3 this field was named + i\_dir\_acl, though it was usually set to zero and never used. + * - 0x70 + - \_\_le32 + - i\_obso\_faddr + - (Obsolete) fragment address. + * - 0x74 + - 12 bytes + - i\_osd2 + - See the table i_osd2_ for more details. + * - 0x80 + - \_\_le16 + - i\_extra\_isize + - Size of this inode - 128. Alternately, the size of the extended inode + fields beyond the original ext2 inode, including this field. + * - 0x82 + - \_\_le16 + - i\_checksum\_hi + - Upper 16-bits of the inode checksum. + * - 0x84 + - \_\_le32 + - i\_ctime\_extra + - Extra change time bits. This provides sub-second precision. See Inode + Timestamps section. + * - 0x88 + - \_\_le32 + - i\_mtime\_extra + - Extra modification time bits. This provides sub-second precision. + * - 0x8C + - \_\_le32 + - i\_atime\_extra + - Extra access time bits. This provides sub-second precision. + * - 0x90 + - \_\_le32 + - i\_crtime + - File creation time, in seconds since the epoch. + * - 0x94 + - \_\_le32 + - i\_crtime\_extra + - Extra file creation time bits. This provides sub-second precision. + * - 0x98 + - \_\_le32 + - i\_version\_hi + - Upper 32-bits for version number. + * - 0x9C + - \_\_le32 + - i\_projid + - Project ID. + +.. _i_mode: + +The ``i_mode`` value is a combination of the following flags: + +.. list-table:: + :widths: 16 64 + :header-rows: 1 + + * - Value + - Description + * - 0x1 + - S\_IXOTH (Others may execute) + * - 0x2 + - S\_IWOTH (Others may write) + * - 0x4 + - S\_IROTH (Others may read) + * - 0x8 + - S\_IXGRP (Group members may execute) + * - 0x10 + - S\_IWGRP (Group members may write) + * - 0x20 + - S\_IRGRP (Group members may read) + * - 0x40 + - S\_IXUSR (Owner may execute) + * - 0x80 + - S\_IWUSR (Owner may write) + * - 0x100 + - S\_IRUSR (Owner may read) + * - 0x200 + - S\_ISVTX (Sticky bit) + * - 0x400 + - S\_ISGID (Set GID) + * - 0x800 + - S\_ISUID (Set UID) + * - + - These are mutually-exclusive file types: + * - 0x1000 + - S\_IFIFO (FIFO) + * - 0x2000 + - S\_IFCHR (Character device) + * - 0x4000 + - S\_IFDIR (Directory) + * - 0x6000 + - S\_IFBLK (Block device) + * - 0x8000 + - S\_IFREG (Regular file) + * - 0xA000 + - S\_IFLNK (Symbolic link) + * - 0xC000 + - S\_IFSOCK (Socket) + +.. _i_flags: + +The ``i_flags`` field is a combination of these values: + +.. list-table:: + :widths: 16 64 + :header-rows: 1 + + * - Value + - Description + * - 0x1 + - This file requires secure deletion (EXT4\_SECRM\_FL). (not implemented) + * - 0x2 + - This file should be preserved, should undeletion be desired + (EXT4\_UNRM\_FL). (not implemented) + * - 0x4 + - File is compressed (EXT4\_COMPR\_FL). (not really implemented) + * - 0x8 + - All writes to the file must be synchronous (EXT4\_SYNC\_FL). + * - 0x10 + - File is immutable (EXT4\_IMMUTABLE\_FL). + * - 0x20 + - File can only be appended (EXT4\_APPEND\_FL). + * - 0x40 + - The dump(1) utility should not dump this file (EXT4\_NODUMP\_FL). + * - 0x80 + - Do not update access time (EXT4\_NOATIME\_FL). + * - 0x100 + - Dirty compressed file (EXT4\_DIRTY\_FL). (not used) + * - 0x200 + - File has one or more compressed clusters (EXT4\_COMPRBLK\_FL). (not used) + * - 0x400 + - Do not compress file (EXT4\_NOCOMPR\_FL). (not used) + * - 0x800 + - Encrypted inode (EXT4\_ENCRYPT\_FL). This bit value previously was + EXT4\_ECOMPR\_FL (compression error), which was never used. + * - 0x1000 + - Directory has hashed indexes (EXT4\_INDEX\_FL). + * - 0x2000 + - AFS magic directory (EXT4\_IMAGIC\_FL). + * - 0x4000 + - File data must always be written through the journal + (EXT4\_JOURNAL\_DATA\_FL). + * - 0x8000 + - File tail should not be merged (EXT4\_NOTAIL\_FL). (not used by ext4) + * - 0x10000 + - All directory entry data should be written synchronously (see + ``dirsync``) (EXT4\_DIRSYNC\_FL). + * - 0x20000 + - Top of directory hierarchy (EXT4\_TOPDIR\_FL). + * - 0x40000 + - This is a huge file (EXT4\_HUGE\_FILE\_FL). + * - 0x80000 + - Inode uses extents (EXT4\_EXTENTS\_FL). + * - 0x100000 + - Verity protected file (EXT4\_VERITY\_FL). + * - 0x200000 + - Inode stores a large extended attribute value in its data blocks + (EXT4\_EA\_INODE\_FL). + * - 0x400000 + - This file has blocks allocated past EOF (EXT4\_EOFBLOCKS\_FL). + (deprecated) + * - 0x01000000 + - Inode is a snapshot (``EXT4_SNAPFILE_FL``). (not in mainline) + * - 0x04000000 + - Snapshot is being deleted (``EXT4_SNAPFILE_DELETED_FL``). (not in + mainline) + * - 0x08000000 + - Snapshot shrink has completed (``EXT4_SNAPFILE_SHRUNK_FL``). (not in + mainline) + * - 0x10000000 + - Inode has inline data (EXT4\_INLINE\_DATA\_FL). + * - 0x20000000 + - Create children with the same project ID (EXT4\_PROJINHERIT\_FL). + * - 0x80000000 + - Reserved for ext4 library (EXT4\_RESERVED\_FL). + * - + - Aggregate flags: + * - 0x705BDFFF + - User-visible flags. + * - 0x604BC0FF + - User-modifiable flags. Note that while EXT4\_JOURNAL\_DATA\_FL and + EXT4\_EXTENTS\_FL can be set with setattr, they are not in the kernel's + EXT4\_FL\_USER\_MODIFIABLE mask, since it needs to handle the setting of + these flags in a special manner and they are masked out of the set of + flags that are saved directly to i\_flags. + +.. _i_osd1: + +The ``osd1`` field has multiple meanings depending on the creator: + +Linux: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Size + - Name + - Description + * - 0x0 + - \_\_le32 + - l\_i\_version + - Inode version. However, if the EA\_INODE inode flag is set, this inode + stores an extended attribute value and this field contains the upper 32 + bits of the attribute value's reference count. + +Hurd: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Size + - Name + - Description + * - 0x0 + - \_\_le32 + - h\_i\_translator + - ?? + +Masix: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Size + - Name + - Description + * - 0x0 + - \_\_le32 + - m\_i\_reserved + - ?? + +.. _i_osd2: + +The ``osd2`` field has multiple meanings depending on the filesystem creator: + +Linux: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Size + - Name + - Description + * - 0x0 + - \_\_le16 + - l\_i\_blocks\_high + - Upper 16-bits of the block count. Please see the note attached to + i\_blocks\_lo. + * - 0x2 + - \_\_le16 + - l\_i\_file\_acl\_high + - Upper 16-bits of the extended attribute block (historically, the file + ACL location). See the Extended Attributes section below. + * - 0x4 + - \_\_le16 + - l\_i\_uid\_high + - Upper 16-bits of the Owner UID. + * - 0x6 + - \_\_le16 + - l\_i\_gid\_high + - Upper 16-bits of the GID. + * - 0x8 + - \_\_le16 + - l\_i\_checksum\_lo + - Lower 16-bits of the inode checksum. + * - 0xA + - \_\_le16 + - l\_i\_reserved + - Unused. + +Hurd: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Size + - Name + - Description + * - 0x0 + - \_\_le16 + - h\_i\_reserved1 + - ?? + * - 0x2 + - \_\_u16 + - h\_i\_mode\_high + - Upper 16-bits of the file mode. + * - 0x4 + - \_\_le16 + - h\_i\_uid\_high + - Upper 16-bits of the Owner UID. + * - 0x6 + - \_\_le16 + - h\_i\_gid\_high + - Upper 16-bits of the GID. + * - 0x8 + - \_\_u32 + - h\_i\_author + - Author code? + +Masix: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Size + - Name + - Description + * - 0x0 + - \_\_le16 + - h\_i\_reserved1 + - ?? + * - 0x2 + - \_\_u16 + - m\_i\_file\_acl\_high + - Upper 16-bits of the extended attribute block (historically, the file + ACL location). + * - 0x4 + - \_\_u32 + - m\_i\_reserved2[2] + - ?? + +Inode Size +~~~~~~~~~~ + +In ext2 and ext3, the inode structure size was fixed at 128 bytes +(``EXT2_GOOD_OLD_INODE_SIZE``) and each inode had a disk record size of +128 bytes. Starting with ext4, it is possible to allocate a larger +on-disk inode at format time for all inodes in the filesystem to provide +space beyond the end of the original ext2 inode. The on-disk inode +record size is recorded in the superblock as ``s_inode_size``. The +number of bytes actually used by struct ext4\_inode beyond the original +128-byte ext2 inode is recorded in the ``i_extra_isize`` field for each +inode, which allows struct ext4\_inode to grow for a new kernel without +having to upgrade all of the on-disk inodes. Access to fields beyond +EXT2\_GOOD\_OLD\_INODE\_SIZE should be verified to be within +``i_extra_isize``. By default, ext4 inode records are 256 bytes, and (as +of August 2019) the inode structure is 160 bytes +(``i_extra_isize = 32``). The extra space between the end of the inode +structure and the end of the inode record can be used to store extended +attributes. Each inode record can be as large as the filesystem block +size, though this is not terribly efficient. + +Finding an Inode +~~~~~~~~~~~~~~~~ + +Each block group contains ``sb->s_inodes_per_group`` inodes. Because +inode 0 is defined not to exist, this formula can be used to find the +block group that an inode lives in: +``bg = (inode_num - 1) / sb->s_inodes_per_group``. The particular inode +can be found within the block group's inode table at +``index = (inode_num - 1) % sb->s_inodes_per_group``. To get the byte +address within the inode table, use +``offset = index * sb->s_inode_size``. + +Inode Timestamps +~~~~~~~~~~~~~~~~ + +Four timestamps are recorded in the lower 128 bytes of the inode +structure -- inode change time (ctime), access time (atime), data +modification time (mtime), and deletion time (dtime). The four fields +are 32-bit signed integers that represent seconds since the Unix epoch +(1970-01-01 00:00:00 GMT), which means that the fields will overflow in +January 2038. For inodes that are not linked from any directory but are +still open (orphan inodes), the dtime field is overloaded for use with +the orphan list. The superblock field ``s_last_orphan`` points to the +first inode in the orphan list; dtime is then the number of the next +orphaned inode, or zero if there are no more orphans. + +If the inode structure size ``sb->s_inode_size`` is larger than 128 +bytes and the ``i_inode_extra`` field is large enough to encompass the +respective ``i_[cma]time_extra`` field, the ctime, atime, and mtime +inode fields are widened to 64 bits. Within this “extra” 32-bit field, +the lower two bits are used to extend the 32-bit seconds field to be 34 +bit wide; the upper 30 bits are used to provide nanosecond timestamp +accuracy. Therefore, timestamps should not overflow until May 2446. +dtime was not widened. There is also a fifth timestamp to record inode +creation time (crtime); this field is 64-bits wide and decoded in the +same manner as 64-bit [cma]time. Neither crtime nor dtime are accessible +through the regular stat() interface, though debugfs will report them. + +We use the 32-bit signed time value plus (2^32 \* (extra epoch bits)). +In other words: + +.. list-table:: + :widths: 20 20 20 20 20 + :header-rows: 1 + + * - Extra epoch bits + - MSB of 32-bit time + - Adjustment for signed 32-bit to 64-bit tv\_sec + - Decoded 64-bit tv\_sec + - valid time range + * - 0 0 + - 1 + - 0 + - ``-0x80000000 - -0x00000001`` + - 1901-12-13 to 1969-12-31 + * - 0 0 + - 0 + - 0 + - ``0x000000000 - 0x07fffffff`` + - 1970-01-01 to 2038-01-19 + * - 0 1 + - 1 + - 0x100000000 + - ``0x080000000 - 0x0ffffffff`` + - 2038-01-19 to 2106-02-07 + * - 0 1 + - 0 + - 0x100000000 + - ``0x100000000 - 0x17fffffff`` + - 2106-02-07 to 2174-02-25 + * - 1 0 + - 1 + - 0x200000000 + - ``0x180000000 - 0x1ffffffff`` + - 2174-02-25 to 2242-03-16 + * - 1 0 + - 0 + - 0x200000000 + - ``0x200000000 - 0x27fffffff`` + - 2242-03-16 to 2310-04-04 + * - 1 1 + - 1 + - 0x300000000 + - ``0x280000000 - 0x2ffffffff`` + - 2310-04-04 to 2378-04-22 + * - 1 1 + - 0 + - 0x300000000 + - ``0x300000000 - 0x37fffffff`` + - 2378-04-22 to 2446-05-10 + +This is a somewhat odd encoding since there are effectively seven times +as many positive values as negative values. There have also been +long-standing bugs decoding and encoding dates beyond 2038, which don't +seem to be fixed as of kernel 3.12 and e2fsprogs 1.42.8. 64-bit kernels +incorrectly use the extra epoch bits 1,1 for dates between 1901 and +1970. At some point the kernel will be fixed and e2fsck will fix this +situation, assuming that it is run before 2310. diff --git a/Documentation/filesystems/ext4/journal.rst b/Documentation/filesystems/ext4/journal.rst new file mode 100644 index 000000000..849d5b119 --- /dev/null +++ b/Documentation/filesystems/ext4/journal.rst @@ -0,0 +1,683 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Journal (jbd2) +-------------- + +Introduced in ext3, the ext4 filesystem employs a journal to protect the +filesystem against corruption in the case of a system crash. A small +continuous region of disk (default 128MiB) is reserved inside the +filesystem as a place to land “important” data writes on-disk as quickly +as possible. Once the important data transaction is fully written to the +disk and flushed from the disk write cache, a record of the data being +committed is also written to the journal. At some later point in time, +the journal code writes the transactions to their final locations on +disk (this could involve a lot of seeking or a lot of small +read-write-erases) before erasing the commit record. Should the system +crash during the second slow write, the journal can be replayed all the +way to the latest commit record, guaranteeing the atomicity of whatever +gets written through the journal to the disk. The effect of this is to +guarantee that the filesystem does not become stuck midway through a +metadata update. + +For performance reasons, ext4 by default only writes filesystem metadata +through the journal. This means that file data blocks are /not/ +guaranteed to be in any consistent state after a crash. If this default +guarantee level (``data=ordered``) is not satisfactory, there is a mount +option to control journal behavior. If ``data=journal``, all data and +metadata are written to disk through the journal. This is slower but +safest. If ``data=writeback``, dirty data blocks are not flushed to the +disk before the metadata are written to disk through the journal. + +In case of ``data=ordered`` mode, Ext4 also supports fast commits which +help reduce commit latency significantly. The default ``data=ordered`` +mode works by logging metadata blocks to the journal. In fast commit +mode, Ext4 only stores the minimal delta needed to recreate the +affected metadata in fast commit space that is shared with JBD2. +Once the fast commit area fills in or if fast commit is not possible +or if JBD2 commit timer goes off, Ext4 performs a traditional full commit. +A full commit invalidates all the fast commits that happened before +it and thus it makes the fast commit area empty for further fast +commits. This feature needs to be enabled at mkfs time. + +The journal inode is typically inode 8. The first 68 bytes of the +journal inode are replicated in the ext4 superblock. The journal itself +is normal (but hidden) file within the filesystem. The file usually +consumes an entire block group, though mke2fs tries to put it in the +middle of the disk. + +All fields in jbd2 are written to disk in big-endian order. This is the +opposite of ext4. + +NOTE: Both ext4 and ocfs2 use jbd2. + +The maximum size of a journal embedded in an ext4 filesystem is 2^32 +blocks. jbd2 itself does not seem to care. + +Layout +~~~~~~ + +Generally speaking, the journal has this format: + +.. list-table:: + :widths: 16 48 16 + :header-rows: 1 + + * - Superblock + - descriptor\_block (data\_blocks or revocation\_block) [more data or + revocations] commmit\_block + - [more transactions...] + * - + - One transaction + - + +Notice that a transaction begins with either a descriptor and some data, +or a block revocation list. A finished transaction always ends with a +commit. If there is no commit record (or the checksums don't match), the +transaction will be discarded during replay. + +External Journal +~~~~~~~~~~~~~~~~ + +Optionally, an ext4 filesystem can be created with an external journal +device (as opposed to an internal journal, which uses a reserved inode). +In this case, on the filesystem device, ``s_journal_inum`` should be +zero and ``s_journal_uuid`` should be set. On the journal device there +will be an ext4 super block in the usual place, with a matching UUID. +The journal superblock will be in the next full block after the +superblock. + +.. list-table:: + :widths: 12 12 12 32 12 + :header-rows: 1 + + * - 1024 bytes of padding + - ext4 Superblock + - Journal Superblock + - descriptor\_block (data\_blocks or revocation\_block) [more data or + revocations] commmit\_block + - [more transactions...] + * - + - + - + - One transaction + - + +Block Header +~~~~~~~~~~~~ + +Every block in the journal starts with a common 12-byte header +``struct journal_header_s``: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Type + - Name + - Description + * - 0x0 + - \_\_be32 + - h\_magic + - jbd2 magic number, 0xC03B3998. + * - 0x4 + - \_\_be32 + - h\_blocktype + - Description of what this block contains. See the jbd2_blocktype_ table + below. + * - 0x8 + - \_\_be32 + - h\_sequence + - The transaction ID that goes with this block. + +.. _jbd2_blocktype: + +The journal block type can be any one of: + +.. list-table:: + :widths: 16 64 + :header-rows: 1 + + * - Value + - Description + * - 1 + - Descriptor. This block precedes a series of data blocks that were + written through the journal during a transaction. + * - 2 + - Block commit record. This block signifies the completion of a + transaction. + * - 3 + - Journal superblock, v1. + * - 4 + - Journal superblock, v2. + * - 5 + - Block revocation records. This speeds up recovery by enabling the + journal to skip writing blocks that were subsequently rewritten. + +Super Block +~~~~~~~~~~~ + +The super block for the journal is much simpler as compared to ext4's. +The key data kept within are size of the journal, and where to find the +start of the log of transactions. + +The journal superblock is recorded as ``struct journal_superblock_s``, +which is 1024 bytes long: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Type + - Name + - Description + * - + - + - + - Static information describing the journal. + * - 0x0 + - journal\_header\_t (12 bytes) + - s\_header + - Common header identifying this as a superblock. + * - 0xC + - \_\_be32 + - s\_blocksize + - Journal device block size. + * - 0x10 + - \_\_be32 + - s\_maxlen + - Total number of blocks in this journal. + * - 0x14 + - \_\_be32 + - s\_first + - First block of log information. + * - + - + - + - Dynamic information describing the current state of the log. + * - 0x18 + - \_\_be32 + - s\_sequence + - First commit ID expected in log. + * - 0x1C + - \_\_be32 + - s\_start + - Block number of the start of log. Contrary to the comments, this field + being zero does not imply that the journal is clean! + * - 0x20 + - \_\_be32 + - s\_errno + - Error value, as set by jbd2\_journal\_abort(). + * - + - + - + - The remaining fields are only valid in a v2 superblock. + * - 0x24 + - \_\_be32 + - s\_feature\_compat; + - Compatible feature set. See the table jbd2_compat_ below. + * - 0x28 + - \_\_be32 + - s\_feature\_incompat + - Incompatible feature set. See the table jbd2_incompat_ below. + * - 0x2C + - \_\_be32 + - s\_feature\_ro\_compat + - Read-only compatible feature set. There aren't any of these currently. + * - 0x30 + - \_\_u8 + - s\_uuid[16] + - 128-bit uuid for journal. This is compared against the copy in the ext4 + super block at mount time. + * - 0x40 + - \_\_be32 + - s\_nr\_users + - Number of file systems sharing this journal. + * - 0x44 + - \_\_be32 + - s\_dynsuper + - Location of dynamic super block copy. (Not used?) + * - 0x48 + - \_\_be32 + - s\_max\_transaction + - Limit of journal blocks per transaction. (Not used?) + * - 0x4C + - \_\_be32 + - s\_max\_trans\_data + - Limit of data blocks per transaction. (Not used?) + * - 0x50 + - \_\_u8 + - s\_checksum\_type + - Checksum algorithm used for the journal. See jbd2_checksum_type_ for + more info. + * - 0x51 + - \_\_u8[3] + - s\_padding2 + - + * - 0x54 + - \_\_be32 + - s\_num\_fc\_blocks + - Number of fast commit blocks in the journal. + * - 0x58 + - \_\_u32 + - s\_padding[42] + - + * - 0xFC + - \_\_be32 + - s\_checksum + - Checksum of the entire superblock, with this field set to zero. + * - 0x100 + - \_\_u8 + - s\_users[16\*48] + - ids of all file systems sharing the log. e2fsprogs/Linux don't allow + shared external journals, but I imagine Lustre (or ocfs2?), which use + the jbd2 code, might. + +.. _jbd2_compat: + +The journal compat features are any combination of the following: + +.. list-table:: + :widths: 16 64 + :header-rows: 1 + + * - Value + - Description + * - 0x1 + - Journal maintains checksums on the data blocks. + (JBD2\_FEATURE\_COMPAT\_CHECKSUM) + +.. _jbd2_incompat: + +The journal incompat features are any combination of the following: + +.. list-table:: + :widths: 16 64 + :header-rows: 1 + + * - Value + - Description + * - 0x1 + - Journal has block revocation records. (JBD2\_FEATURE\_INCOMPAT\_REVOKE) + * - 0x2 + - Journal can deal with 64-bit block numbers. + (JBD2\_FEATURE\_INCOMPAT\_64BIT) + * - 0x4 + - Journal commits asynchronously. (JBD2\_FEATURE\_INCOMPAT\_ASYNC\_COMMIT) + * - 0x8 + - This journal uses v2 of the checksum on-disk format. Each journal + metadata block gets its own checksum, and the block tags in the + descriptor table contain checksums for each of the data blocks in the + journal. (JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2) + * - 0x10 + - This journal uses v3 of the checksum on-disk format. This is the same as + v2, but the journal block tag size is fixed regardless of the size of + block numbers. (JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3) + * - 0x20 + - Journal has fast commit blocks. (JBD2\_FEATURE\_INCOMPAT\_FAST\_COMMIT) + +.. _jbd2_checksum_type: + +Journal checksum type codes are one of the following. crc32 or crc32c are the +most likely choices. + +.. list-table:: + :widths: 16 64 + :header-rows: 1 + + * - Value + - Description + * - 1 + - CRC32 + * - 2 + - MD5 + * - 3 + - SHA1 + * - 4 + - CRC32C + +Descriptor Block +~~~~~~~~~~~~~~~~ + +The descriptor block contains an array of journal block tags that +describe the final locations of the data blocks that follow in the +journal. Descriptor blocks are open-coded instead of being completely +described by a data structure, but here is the block structure anyway. +Descriptor blocks consume at least 36 bytes, but use a full block: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Type + - Name + - Descriptor + * - 0x0 + - journal\_header\_t + - (open coded) + - Common block header. + * - 0xC + - struct journal\_block\_tag\_s + - open coded array[] + - Enough tags either to fill up the block or to describe all the data + blocks that follow this descriptor block. + +Journal block tags have any of the following formats, depending on which +journal feature and block tag flags are set. + +If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 is set, the journal block tag is +defined as ``struct journal_block_tag3_s``, which looks like the +following. The size is 16 or 32 bytes. + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Type + - Name + - Descriptor + * - 0x0 + - \_\_be32 + - t\_blocknr + - Lower 32-bits of the location of where the corresponding data block + should end up on disk. + * - 0x4 + - \_\_be32 + - t\_flags + - Flags that go with the descriptor. See the table jbd2_tag_flags_ for + more info. + * - 0x8 + - \_\_be32 + - t\_blocknr\_high + - Upper 32-bits of the location of where the corresponding data block + should end up on disk. This is zero if JBD2\_FEATURE\_INCOMPAT\_64BIT is + not enabled. + * - 0xC + - \_\_be32 + - t\_checksum + - Checksum of the journal UUID, the sequence number, and the data block. + * - + - + - + - This field appears to be open coded. It always comes at the end of the + tag, after t_checksum. This field is not present if the "same UUID" flag + is set. + * - 0x8 or 0xC + - char + - uuid[16] + - A UUID to go with this tag. This field appears to be copied from the + ``j_uuid`` field in ``struct journal_s``, but only tune2fs touches that + field. + +.. _jbd2_tag_flags: + +The journal tag flags are any combination of the following: + +.. list-table:: + :widths: 16 64 + :header-rows: 1 + + * - Value + - Description + * - 0x1 + - On-disk block is escaped. The first four bytes of the data block just + happened to match the jbd2 magic number. + * - 0x2 + - This block has the same UUID as previous, therefore the UUID field is + omitted. + * - 0x4 + - The data block was deleted by the transaction. (Not used?) + * - 0x8 + - This is the last tag in this descriptor block. + +If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 is NOT set, the journal block tag +is defined as ``struct journal_block_tag_s``, which looks like the +following. The size is 8, 12, 24, or 28 bytes: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Type + - Name + - Descriptor + * - 0x0 + - \_\_be32 + - t\_blocknr + - Lower 32-bits of the location of where the corresponding data block + should end up on disk. + * - 0x4 + - \_\_be16 + - t\_checksum + - Checksum of the journal UUID, the sequence number, and the data block. + Note that only the lower 16 bits are stored. + * - 0x6 + - \_\_be16 + - t\_flags + - Flags that go with the descriptor. See the table jbd2_tag_flags_ for + more info. + * - + - + - + - This next field is only present if the super block indicates support for + 64-bit block numbers. + * - 0x8 + - \_\_be32 + - t\_blocknr\_high + - Upper 32-bits of the location of where the corresponding data block + should end up on disk. + * - + - + - + - This field appears to be open coded. It always comes at the end of the + tag, after t_flags or t_blocknr_high. This field is not present if the + "same UUID" flag is set. + * - 0x8 or 0xC + - char + - uuid[16] + - A UUID to go with this tag. This field appears to be copied from the + ``j_uuid`` field in ``struct journal_s``, but only tune2fs touches that + field. + +If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2 or +JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 are set, the end of the block is a +``struct jbd2_journal_block_tail``, which looks like this: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Type + - Name + - Descriptor + * - 0x0 + - \_\_be32 + - t\_checksum + - Checksum of the journal UUID + the descriptor block, with this field set + to zero. + +Data Block +~~~~~~~~~~ + +In general, the data blocks being written to disk through the journal +are written verbatim into the journal file after the descriptor block. +However, if the first four bytes of the block match the jbd2 magic +number then those four bytes are replaced with zeroes and the “escaped” +flag is set in the descriptor block tag. + +Revocation Block +~~~~~~~~~~~~~~~~ + +A revocation block is used to prevent replay of a block in an earlier +transaction. This is used to mark blocks that were journalled at one +time but are no longer journalled. Typically this happens if a metadata +block is freed and re-allocated as a file data block; in this case, a +journal replay after the file block was written to disk will cause +corruption. + +**NOTE**: This mechanism is NOT used to express “this journal block is +superseded by this other journal block”, as the author (djwong) +mistakenly thought. Any block being added to a transaction will cause +the removal of all existing revocation records for that block. + +Revocation blocks are described in +``struct jbd2_journal_revoke_header_s``, are at least 16 bytes in +length, but use a full block: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Type + - Name + - Description + * - 0x0 + - journal\_header\_t + - r\_header + - Common block header. + * - 0xC + - \_\_be32 + - r\_count + - Number of bytes used in this block. + * - 0x10 + - \_\_be32 or \_\_be64 + - blocks[0] + - Blocks to revoke. + +After r\_count is a linear array of block numbers that are effectively +revoked by this transaction. The size of each block number is 8 bytes if +the superblock advertises 64-bit block number support, or 4 bytes +otherwise. + +If JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2 or +JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 are set, the end of the revocation +block is a ``struct jbd2_journal_revoke_tail``, which has this format: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Type + - Name + - Description + * - 0x0 + - \_\_be32 + - r\_checksum + - Checksum of the journal UUID + revocation block + +Commit Block +~~~~~~~~~~~~ + +The commit block is a sentry that indicates that a transaction has been +completely written to the journal. Once this commit block reaches the +journal, the data stored with this transaction can be written to their +final locations on disk. + +The commit block is described by ``struct commit_header``, which is 32 +bytes long (but uses a full block): + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Type + - Name + - Descriptor + * - 0x0 + - journal\_header\_s + - (open coded) + - Common block header. + * - 0xC + - unsigned char + - h\_chksum\_type + - The type of checksum to use to verify the integrity of the data blocks + in the transaction. See jbd2_checksum_type_ for more info. + * - 0xD + - unsigned char + - h\_chksum\_size + - The number of bytes used by the checksum. Most likely 4. + * - 0xE + - unsigned char + - h\_padding[2] + - + * - 0x10 + - \_\_be32 + - h\_chksum[JBD2\_CHECKSUM\_BYTES] + - 32 bytes of space to store checksums. If + JBD2\_FEATURE\_INCOMPAT\_CSUM\_V2 or JBD2\_FEATURE\_INCOMPAT\_CSUM\_V3 + are set, the first ``__be32`` is the checksum of the journal UUID and + the entire commit block, with this field zeroed. If + JBD2\_FEATURE\_COMPAT\_CHECKSUM is set, the first ``__be32`` is the + crc32 of all the blocks already written to the transaction. + * - 0x30 + - \_\_be64 + - h\_commit\_sec + - The time that the transaction was committed, in seconds since the epoch. + * - 0x38 + - \_\_be32 + - h\_commit\_nsec + - Nanoseconds component of the above timestamp. + +Fast commits +~~~~~~~~~~~~ + +Fast commit area is organized as a log of tag length values. Each TLV has +a ``struct ext4_fc_tl`` in the beginning which stores the tag and the length +of the entire field. It is followed by variable length tag specific value. +Here is the list of supported tags and their meanings: + +.. list-table:: + :widths: 8 20 20 32 + :header-rows: 1 + + * - Tag + - Meaning + - Value struct + - Description + * - EXT4_FC_TAG_HEAD + - Fast commit area header + - ``struct ext4_fc_head`` + - Stores the TID of the transaction after which these fast commits should + be applied. + * - EXT4_FC_TAG_ADD_RANGE + - Add extent to inode + - ``struct ext4_fc_add_range`` + - Stores the inode number and extent to be added in this inode + * - EXT4_FC_TAG_DEL_RANGE + - Remove logical offsets to inode + - ``struct ext4_fc_del_range`` + - Stores the inode number and the logical offset range that needs to be + removed + * - EXT4_FC_TAG_CREAT + - Create directory entry for a newly created file + - ``struct ext4_fc_dentry_info`` + - Stores the parent inode number, inode number and directory entry of the + newly created file + * - EXT4_FC_TAG_LINK + - Link a directory entry to an inode + - ``struct ext4_fc_dentry_info`` + - Stores the parent inode number, inode number and directory entry + * - EXT4_FC_TAG_UNLINK + - Unlink a directory entry of an inode + - ``struct ext4_fc_dentry_info`` + - Stores the parent inode number, inode number and directory entry + + * - EXT4_FC_TAG_PAD + - Padding (unused area) + - None + - Unused bytes in the fast commit area. + + * - EXT4_FC_TAG_TAIL + - Mark the end of a fast commit + - ``struct ext4_fc_tail`` + - Stores the TID of the commit, CRC of the fast commit of which this tag + represents the end of + diff --git a/Documentation/filesystems/ext4/mmp.rst b/Documentation/filesystems/ext4/mmp.rst new file mode 100644 index 000000000..25660981d --- /dev/null +++ b/Documentation/filesystems/ext4/mmp.rst @@ -0,0 +1,77 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Multiple Mount Protection +------------------------- + +Multiple mount protection (MMP) is a feature that protects the +filesystem against multiple hosts trying to use the filesystem +simultaneously. When a filesystem is opened (for mounting, or fsck, +etc.), the MMP code running on the node (call it node A) checks a +sequence number. If the sequence number is EXT4\_MMP\_SEQ\_CLEAN, the +open continues. If the sequence number is EXT4\_MMP\_SEQ\_FSCK, then +fsck is (hopefully) running, and open fails immediately. Otherwise, the +open code will wait for twice the specified MMP check interval and check +the sequence number again. If the sequence number has changed, then the +filesystem is active on another machine and the open fails. If the MMP +code passes all of those checks, a new MMP sequence number is generated +and written to the MMP block, and the mount proceeds. + +While the filesystem is live, the kernel sets up a timer to re-check the +MMP block at the specified MMP check interval. To perform the re-check, +the MMP sequence number is re-read; if it does not match the in-memory +MMP sequence number, then another node (node B) has mounted the +filesystem, and node A remounts the filesystem read-only. If the +sequence numbers match, the sequence number is incremented both in +memory and on disk, and the re-check is complete. + +The hostname and device filename are written into the MMP block whenever +an open operation succeeds. The MMP code does not use these values; they +are provided purely for informational purposes. + +The checksum is calculated against the FS UUID and the MMP structure. +The MMP structure (``struct mmp_struct``) is as follows: + +.. list-table:: + :widths: 8 12 20 40 + :header-rows: 1 + + * - Offset + - Type + - Name + - Description + * - 0x0 + - \_\_le32 + - mmp\_magic + - Magic number for MMP, 0x004D4D50 (“MMP”). + * - 0x4 + - \_\_le32 + - mmp\_seq + - Sequence number, updated periodically. + * - 0x8 + - \_\_le64 + - mmp\_time + - Time that the MMP block was last updated. + * - 0x10 + - char[64] + - mmp\_nodename + - Hostname of the node that opened the filesystem. + * - 0x50 + - char[32] + - mmp\_bdevname + - Block device name of the filesystem. + * - 0x70 + - \_\_le16 + - mmp\_check\_interval + - The MMP re-check interval, in seconds. + * - 0x72 + - \_\_le16 + - mmp\_pad1 + - Zero. + * - 0x74 + - \_\_le32[226] + - mmp\_pad2 + - Zero. + * - 0x3FC + - \_\_le32 + - mmp\_checksum + - Checksum of the MMP block. diff --git a/Documentation/filesystems/ext4/overview.rst b/Documentation/filesystems/ext4/overview.rst new file mode 100644 index 000000000..123ebfde4 --- /dev/null +++ b/Documentation/filesystems/ext4/overview.rst @@ -0,0 +1,27 @@ +.. SPDX-License-Identifier: GPL-2.0 + +High Level Design +================= + +An ext4 file system is split into a series of block groups. To reduce +performance difficulties due to fragmentation, the block allocator tries +very hard to keep each file's blocks within the same group, thereby +reducing seek times. The size of a block group is specified in +``sb.s_blocks_per_group`` blocks, though it can also calculated as 8 \* +``block_size_in_bytes``. With the default block size of 4KiB, each group +will contain 32,768 blocks, for a length of 128MiB. The number of block +groups is the size of the device divided by the size of a block group. + +All fields in ext4 are written to disk in little-endian order. HOWEVER, +all fields in jbd2 (the journal) are written to disk in big-endian +order. + +.. include:: blocks.rst +.. include:: blockgroup.rst +.. include:: special_inodes.rst +.. include:: allocators.rst +.. include:: checksums.rst +.. include:: bigalloc.rst +.. include:: inlinedata.rst +.. include:: eainode.rst +.. include:: verity.rst diff --git a/Documentation/filesystems/ext4/special_inodes.rst b/Documentation/filesystems/ext4/special_inodes.rst new file mode 100644 index 000000000..9061aabba --- /dev/null +++ b/Documentation/filesystems/ext4/special_inodes.rst @@ -0,0 +1,38 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Special inodes +-------------- + +ext4 reserves some inode for special features, as follows: + +.. list-table:: + :widths: 6 70 + :header-rows: 1 + + * - inode Number + - Purpose + * - 0 + - Doesn't exist; there is no inode 0. + * - 1 + - List of defective blocks. + * - 2 + - Root directory. + * - 3 + - User quota. + * - 4 + - Group quota. + * - 5 + - Boot loader. + * - 6 + - Undelete directory. + * - 7 + - Reserved group descriptors inode. (“resize inode”) + * - 8 + - Journal inode. + * - 9 + - The “exclude” inode, for snapshots(?) + * - 10 + - Replica inode, used for some non-upstream feature? + * - 11 + - Traditional first non-reserved inode. Usually this is the lost+found directory. See s\_first\_ino in the superblock. + diff --git a/Documentation/filesystems/ext4/super.rst b/Documentation/filesystems/ext4/super.rst new file mode 100644 index 000000000..2eb1ab204 --- /dev/null +++ b/Documentation/filesystems/ext4/super.rst @@ -0,0 +1,818 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Super Block +----------- + +The superblock records various information about the enclosing +filesystem, such as block counts, inode counts, supported features, +maintenance information, and more. + +If the sparse\_super feature flag is set, redundant copies of the +superblock and group descriptors are kept only in the groups whose group +number is either 0 or a power of 3, 5, or 7. If the flag is not set, +redundant copies are kept in all groups. + +The superblock checksum is calculated against the superblock structure, +which includes the FS UUID. + +The ext4 superblock is laid out as follows in +``struct ext4_super_block``: + +.. list-table:: + :widths: 8 8 24 40 + :header-rows: 1 + + * - Offset + - Size + - Name + - Description + * - 0x0 + - \_\_le32 + - s\_inodes\_count + - Total inode count. + * - 0x4 + - \_\_le32 + - s\_blocks\_count\_lo + - Total block count. + * - 0x8 + - \_\_le32 + - s\_r\_blocks\_count\_lo + - This number of blocks can only be allocated by the super-user. + * - 0xC + - \_\_le32 + - s\_free\_blocks\_count\_lo + - Free block count. + * - 0x10 + - \_\_le32 + - s\_free\_inodes\_count + - Free inode count. + * - 0x14 + - \_\_le32 + - s\_first\_data\_block + - First data block. This must be at least 1 for 1k-block filesystems and + is typically 0 for all other block sizes. + * - 0x18 + - \_\_le32 + - s\_log\_block\_size + - Block size is 2 ^ (10 + s\_log\_block\_size). + * - 0x1C + - \_\_le32 + - s\_log\_cluster\_size + - Cluster size is 2 ^ (10 + s\_log\_cluster\_size) blocks if bigalloc is + enabled. Otherwise s\_log\_cluster\_size must equal s\_log\_block\_size. + * - 0x20 + - \_\_le32 + - s\_blocks\_per\_group + - Blocks per group. + * - 0x24 + - \_\_le32 + - s\_clusters\_per\_group + - Clusters per group, if bigalloc is enabled. Otherwise + s\_clusters\_per\_group must equal s\_blocks\_per\_group. + * - 0x28 + - \_\_le32 + - s\_inodes\_per\_group + - Inodes per group. + * - 0x2C + - \_\_le32 + - s\_mtime + - Mount time, in seconds since the epoch. + * - 0x30 + - \_\_le32 + - s\_wtime + - Write time, in seconds since the epoch. + * - 0x34 + - \_\_le16 + - s\_mnt\_count + - Number of mounts since the last fsck. + * - 0x36 + - \_\_le16 + - s\_max\_mnt\_count + - Number of mounts beyond which a fsck is needed. + * - 0x38 + - \_\_le16 + - s\_magic + - Magic signature, 0xEF53 + * - 0x3A + - \_\_le16 + - s\_state + - File system state. See super_state_ for more info. + * - 0x3C + - \_\_le16 + - s\_errors + - Behaviour when detecting errors. See super_errors_ for more info. + * - 0x3E + - \_\_le16 + - s\_minor\_rev\_level + - Minor revision level. + * - 0x40 + - \_\_le32 + - s\_lastcheck + - Time of last check, in seconds since the epoch. + * - 0x44 + - \_\_le32 + - s\_checkinterval + - Maximum time between checks, in seconds. + * - 0x48 + - \_\_le32 + - s\_creator\_os + - Creator OS. See the table super_creator_ for more info. + * - 0x4C + - \_\_le32 + - s\_rev\_level + - Revision level. See the table super_revision_ for more info. + * - 0x50 + - \_\_le16 + - s\_def\_resuid + - Default uid for reserved blocks. + * - 0x52 + - \_\_le16 + - s\_def\_resgid + - Default gid for reserved blocks. + * - + - + - + - These fields are for EXT4_DYNAMIC_REV superblocks only. + + Note: the difference between the compatible feature set and the + incompatible feature set is that if there is a bit set in the + incompatible feature set that the kernel doesn't know about, it should + refuse to mount the filesystem. + + e2fsck's requirements are more strict; if it doesn't know + about a feature in either the compatible or incompatible feature set, it + must abort and not try to meddle with things it doesn't understand... + * - 0x54 + - \_\_le32 + - s\_first\_ino + - First non-reserved inode. + * - 0x58 + - \_\_le16 + - s\_inode\_size + - Size of inode structure, in bytes. + * - 0x5A + - \_\_le16 + - s\_block\_group\_nr + - Block group # of this superblock. + * - 0x5C + - \_\_le32 + - s\_feature\_compat + - Compatible feature set flags. Kernel can still read/write this fs even + if it doesn't understand a flag; fsck should not do that. See the + super_compat_ table for more info. + * - 0x60 + - \_\_le32 + - s\_feature\_incompat + - Incompatible feature set. If the kernel or fsck doesn't understand one + of these bits, it should stop. See the super_incompat_ table for more + info. + * - 0x64 + - \_\_le32 + - s\_feature\_ro\_compat + - Readonly-compatible feature set. If the kernel doesn't understand one of + these bits, it can still mount read-only. See the super_rocompat_ table + for more info. + * - 0x68 + - \_\_u8 + - s\_uuid[16] + - 128-bit UUID for volume. + * - 0x78 + - char + - s\_volume\_name[16] + - Volume label. + * - 0x88 + - char + - s\_last\_mounted[64] + - Directory where filesystem was last mounted. + * - 0xC8 + - \_\_le32 + - s\_algorithm\_usage\_bitmap + - For compression (Not used in e2fsprogs/Linux) + * - + - + - + - Performance hints. Directory preallocation should only happen if the + EXT4_FEATURE_COMPAT_DIR_PREALLOC flag is on. + * - 0xCC + - \_\_u8 + - s\_prealloc\_blocks + - #. of blocks to try to preallocate for ... files? (Not used in + e2fsprogs/Linux) + * - 0xCD + - \_\_u8 + - s\_prealloc\_dir\_blocks + - #. of blocks to preallocate for directories. (Not used in + e2fsprogs/Linux) + * - 0xCE + - \_\_le16 + - s\_reserved\_gdt\_blocks + - Number of reserved GDT entries for future filesystem expansion. + * - + - + - + - Journalling support is valid only if EXT4_FEATURE_COMPAT_HAS_JOURNAL is + set. + * - 0xD0 + - \_\_u8 + - s\_journal\_uuid[16] + - UUID of journal superblock + * - 0xE0 + - \_\_le32 + - s\_journal\_inum + - inode number of journal file. + * - 0xE4 + - \_\_le32 + - s\_journal\_dev + - Device number of journal file, if the external journal feature flag is + set. + * - 0xE8 + - \_\_le32 + - s\_last\_orphan + - Start of list of orphaned inodes to delete. + * - 0xEC + - \_\_le32 + - s\_hash\_seed[4] + - HTREE hash seed. + * - 0xFC + - \_\_u8 + - s\_def\_hash\_version + - Default hash algorithm to use for directory hashes. See super_def_hash_ + for more info. + * - 0xFD + - \_\_u8 + - s\_jnl\_backup\_type + - If this value is 0 or EXT3\_JNL\_BACKUP\_BLOCKS (1), then the + ``s_jnl_blocks`` field contains a duplicate copy of the inode's + ``i_block[]`` array and ``i_size``. + * - 0xFE + - \_\_le16 + - s\_desc\_size + - Size of group descriptors, in bytes, if the 64bit incompat feature flag + is set. + * - 0x100 + - \_\_le32 + - s\_default\_mount\_opts + - Default mount options. See the super_mountopts_ table for more info. + * - 0x104 + - \_\_le32 + - s\_first\_meta\_bg + - First metablock block group, if the meta\_bg feature is enabled. + * - 0x108 + - \_\_le32 + - s\_mkfs\_time + - When the filesystem was created, in seconds since the epoch. + * - 0x10C + - \_\_le32 + - s\_jnl\_blocks[17] + - Backup copy of the journal inode's ``i_block[]`` array in the first 15 + elements and i\_size\_high and i\_size in the 16th and 17th elements, + respectively. + * - + - + - + - 64bit support is valid only if EXT4_FEATURE_COMPAT_64BIT is set. + * - 0x150 + - \_\_le32 + - s\_blocks\_count\_hi + - High 32-bits of the block count. + * - 0x154 + - \_\_le32 + - s\_r\_blocks\_count\_hi + - High 32-bits of the reserved block count. + * - 0x158 + - \_\_le32 + - s\_free\_blocks\_count\_hi + - High 32-bits of the free block count. + * - 0x15C + - \_\_le16 + - s\_min\_extra\_isize + - All inodes have at least # bytes. + * - 0x15E + - \_\_le16 + - s\_want\_extra\_isize + - New inodes should reserve # bytes. + * - 0x160 + - \_\_le32 + - s\_flags + - Miscellaneous flags. See the super_flags_ table for more info. + * - 0x164 + - \_\_le16 + - s\_raid\_stride + - RAID stride. This is the number of logical blocks read from or written + to the disk before moving to the next disk. This affects the placement + of filesystem metadata, which will hopefully make RAID storage faster. + * - 0x166 + - \_\_le16 + - s\_mmp\_interval + - #. seconds to wait in multi-mount prevention (MMP) checking. In theory, + MMP is a mechanism to record in the superblock which host and device + have mounted the filesystem, in order to prevent multiple mounts. This + feature does not seem to be implemented... + * - 0x168 + - \_\_le64 + - s\_mmp\_block + - Block # for multi-mount protection data. + * - 0x170 + - \_\_le32 + - s\_raid\_stripe\_width + - RAID stripe width. This is the number of logical blocks read from or + written to the disk before coming back to the current disk. This is used + by the block allocator to try to reduce the number of read-modify-write + operations in a RAID5/6. + * - 0x174 + - \_\_u8 + - s\_log\_groups\_per\_flex + - Size of a flexible block group is 2 ^ ``s_log_groups_per_flex``. + * - 0x175 + - \_\_u8 + - s\_checksum\_type + - Metadata checksum algorithm type. The only valid value is 1 (crc32c). + * - 0x176 + - \_\_le16 + - s\_reserved\_pad + - + * - 0x178 + - \_\_le64 + - s\_kbytes\_written + - Number of KiB written to this filesystem over its lifetime. + * - 0x180 + - \_\_le32 + - s\_snapshot\_inum + - inode number of active snapshot. (Not used in e2fsprogs/Linux.) + * - 0x184 + - \_\_le32 + - s\_snapshot\_id + - Sequential ID of active snapshot. (Not used in e2fsprogs/Linux.) + * - 0x188 + - \_\_le64 + - s\_snapshot\_r\_blocks\_count + - Number of blocks reserved for active snapshot's future use. (Not used in + e2fsprogs/Linux.) + * - 0x190 + - \_\_le32 + - s\_snapshot\_list + - inode number of the head of the on-disk snapshot list. (Not used in + e2fsprogs/Linux.) + * - 0x194 + - \_\_le32 + - s\_error\_count + - Number of errors seen. + * - 0x198 + - \_\_le32 + - s\_first\_error\_time + - First time an error happened, in seconds since the epoch. + * - 0x19C + - \_\_le32 + - s\_first\_error\_ino + - inode involved in first error. + * - 0x1A0 + - \_\_le64 + - s\_first\_error\_block + - Number of block involved of first error. + * - 0x1A8 + - \_\_u8 + - s\_first\_error\_func[32] + - Name of function where the error happened. + * - 0x1C8 + - \_\_le32 + - s\_first\_error\_line + - Line number where error happened. + * - 0x1CC + - \_\_le32 + - s\_last\_error\_time + - Time of most recent error, in seconds since the epoch. + * - 0x1D0 + - \_\_le32 + - s\_last\_error\_ino + - inode involved in most recent error. + * - 0x1D4 + - \_\_le32 + - s\_last\_error\_line + - Line number where most recent error happened. + * - 0x1D8 + - \_\_le64 + - s\_last\_error\_block + - Number of block involved in most recent error. + * - 0x1E0 + - \_\_u8 + - s\_last\_error\_func[32] + - Name of function where the most recent error happened. + * - 0x200 + - \_\_u8 + - s\_mount\_opts[64] + - ASCIIZ string of mount options. + * - 0x240 + - \_\_le32 + - s\_usr\_quota\_inum + - Inode number of user `quota <quota>`__ file. + * - 0x244 + - \_\_le32 + - s\_grp\_quota\_inum + - Inode number of group `quota <quota>`__ file. + * - 0x248 + - \_\_le32 + - s\_overhead\_blocks + - Overhead blocks/clusters in fs. (Huh? This field is always zero, which + means that the kernel calculates it dynamically.) + * - 0x24C + - \_\_le32 + - s\_backup\_bgs[2] + - Block groups containing superblock backups (if sparse\_super2) + * - 0x254 + - \_\_u8 + - s\_encrypt\_algos[4] + - Encryption algorithms in use. There can be up to four algorithms in use + at any time; valid algorithm codes are given in the super_encrypt_ table + below. + * - 0x258 + - \_\_u8 + - s\_encrypt\_pw\_salt[16] + - Salt for the string2key algorithm for encryption. + * - 0x268 + - \_\_le32 + - s\_lpf\_ino + - Inode number of lost+found + * - 0x26C + - \_\_le32 + - s\_prj\_quota\_inum + - Inode that tracks project quotas. + * - 0x270 + - \_\_le32 + - s\_checksum\_seed + - Checksum seed used for metadata\_csum calculations. This value is + crc32c(~0, $orig\_fs\_uuid). + * - 0x274 + - \_\_u8 + - s\_wtime_hi + - Upper 8 bits of the s_wtime field. + * - 0x275 + - \_\_u8 + - s\_mtime_hi + - Upper 8 bits of the s_mtime field. + * - 0x276 + - \_\_u8 + - s\_mkfs_time_hi + - Upper 8 bits of the s_mkfs_time field. + * - 0x277 + - \_\_u8 + - s\_lastcheck_hi + - Upper 8 bits of the s_lastcheck_hi field. + * - 0x278 + - \_\_u8 + - s\_first_error_time_hi + - Upper 8 bits of the s_first_error_time_hi field. + * - 0x279 + - \_\_u8 + - s\_last_error_time_hi + - Upper 8 bits of the s_last_error_time_hi field. + * - 0x27A + - \_\_u8 + - s\_pad[2] + - Zero padding. + * - 0x27C + - \_\_le16 + - s\_encoding + - Filename charset encoding. + * - 0x27E + - \_\_le16 + - s\_encoding_flags + - Filename charset encoding flags. + * - 0x280 + - \_\_le32 + - s\_reserved[95] + - Padding to the end of the block. + * - 0x3FC + - \_\_le32 + - s\_checksum + - Superblock checksum. + +.. _super_state: + +The superblock state is some combination of the following: + +.. list-table:: + :widths: 8 72 + :header-rows: 1 + + * - Value + - Description + * - 0x0001 + - Cleanly umounted + * - 0x0002 + - Errors detected + * - 0x0004 + - Orphans being recovered + +.. _super_errors: + +The superblock error policy is one of the following: + +.. list-table:: + :widths: 8 72 + :header-rows: 1 + + * - Value + - Description + * - 1 + - Continue + * - 2 + - Remount read-only + * - 3 + - Panic + +.. _super_creator: + +The filesystem creator is one of the following: + +.. list-table:: + :widths: 8 72 + :header-rows: 1 + + * - Value + - Description + * - 0 + - Linux + * - 1 + - Hurd + * - 2 + - Masix + * - 3 + - FreeBSD + * - 4 + - Lites + +.. _super_revision: + +The superblock revision is one of the following: + +.. list-table:: + :widths: 8 72 + :header-rows: 1 + + * - Value + - Description + * - 0 + - Original format + * - 1 + - v2 format w/ dynamic inode sizes + +Note that ``EXT4_DYNAMIC_REV`` refers to a revision 1 or newer filesystem. + +.. _super_compat: + +The superblock compatible features field is a combination of any of the +following: + +.. list-table:: + :widths: 16 64 + :header-rows: 1 + + * - Value + - Description + * - 0x1 + - Directory preallocation (COMPAT\_DIR\_PREALLOC). + * - 0x2 + - “imagic inodes”. Not clear from the code what this does + (COMPAT\_IMAGIC\_INODES). + * - 0x4 + - Has a journal (COMPAT\_HAS\_JOURNAL). + * - 0x8 + - Supports extended attributes (COMPAT\_EXT\_ATTR). + * - 0x10 + - Has reserved GDT blocks for filesystem expansion + (COMPAT\_RESIZE\_INODE). Requires RO\_COMPAT\_SPARSE\_SUPER. + * - 0x20 + - Has directory indices (COMPAT\_DIR\_INDEX). + * - 0x40 + - “Lazy BG”. Not in Linux kernel, seems to have been for uninitialized + block groups? (COMPAT\_LAZY\_BG) + * - 0x80 + - “Exclude inode”. Not used. (COMPAT\_EXCLUDE\_INODE). + * - 0x100 + - “Exclude bitmap”. Seems to be used to indicate the presence of + snapshot-related exclude bitmaps? Not defined in kernel or used in + e2fsprogs (COMPAT\_EXCLUDE\_BITMAP). + * - 0x200 + - Sparse Super Block, v2. If this flag is set, the SB field s\_backup\_bgs + points to the two block groups that contain backup superblocks + (COMPAT\_SPARSE\_SUPER2). + * - 0x400 + - Fast commits supported. Although fast commits blocks are + backward incompatible, fast commit blocks are not always + present in the journal. If fast commit blocks are present in + the journal, JBD2 incompat feature + (JBD2\_FEATURE\_INCOMPAT\_FAST\_COMMIT) gets + set (COMPAT\_FAST\_COMMIT). + +.. _super_incompat: + +The superblock incompatible features field is a combination of any of the +following: + +.. list-table:: + :widths: 16 64 + :header-rows: 1 + + * - Value + - Description + * - 0x1 + - Compression (INCOMPAT\_COMPRESSION). + * - 0x2 + - Directory entries record the file type. See ext4\_dir\_entry\_2 below + (INCOMPAT\_FILETYPE). + * - 0x4 + - Filesystem needs recovery (INCOMPAT\_RECOVER). + * - 0x8 + - Filesystem has a separate journal device (INCOMPAT\_JOURNAL\_DEV). + * - 0x10 + - Meta block groups. See the earlier discussion of this feature + (INCOMPAT\_META\_BG). + * - 0x40 + - Files in this filesystem use extents (INCOMPAT\_EXTENTS). + * - 0x80 + - Enable a filesystem size of 2^64 blocks (INCOMPAT\_64BIT). + * - 0x100 + - Multiple mount protection (INCOMPAT\_MMP). + * - 0x200 + - Flexible block groups. See the earlier discussion of this feature + (INCOMPAT\_FLEX\_BG). + * - 0x400 + - Inodes can be used to store large extended attribute values + (INCOMPAT\_EA\_INODE). + * - 0x1000 + - Data in directory entry (INCOMPAT\_DIRDATA). (Not implemented?) + * - 0x2000 + - Metadata checksum seed is stored in the superblock. This feature enables + the administrator to change the UUID of a metadata\_csum filesystem + while the filesystem is mounted; without it, the checksum definition + requires all metadata blocks to be rewritten (INCOMPAT\_CSUM\_SEED). + * - 0x4000 + - Large directory >2GB or 3-level htree (INCOMPAT\_LARGEDIR). Prior to + this feature, directories could not be larger than 4GiB and could not + have an htree more than 2 levels deep. If this feature is enabled, + directories can be larger than 4GiB and have a maximum htree depth of 3. + * - 0x8000 + - Data in inode (INCOMPAT\_INLINE\_DATA). + * - 0x10000 + - Encrypted inodes are present on the filesystem. (INCOMPAT\_ENCRYPT). + +.. _super_rocompat: + +The superblock read-only compatible features field is a combination of any of +the following: + +.. list-table:: + :widths: 16 64 + :header-rows: 1 + + * - Value + - Description + * - 0x1 + - Sparse superblocks. See the earlier discussion of this feature + (RO\_COMPAT\_SPARSE\_SUPER). + * - 0x2 + - This filesystem has been used to store a file greater than 2GiB + (RO\_COMPAT\_LARGE\_FILE). + * - 0x4 + - Not used in kernel or e2fsprogs (RO\_COMPAT\_BTREE\_DIR). + * - 0x8 + - This filesystem has files whose sizes are represented in units of + logical blocks, not 512-byte sectors. This implies a very large file + indeed! (RO\_COMPAT\_HUGE\_FILE) + * - 0x10 + - Group descriptors have checksums. In addition to detecting corruption, + this is useful for lazy formatting with uninitialized groups + (RO\_COMPAT\_GDT\_CSUM). + * - 0x20 + - Indicates that the old ext3 32,000 subdirectory limit no longer applies + (RO\_COMPAT\_DIR\_NLINK). A directory's i\_links\_count will be set to 1 + if it is incremented past 64,999. + * - 0x40 + - Indicates that large inodes exist on this filesystem + (RO\_COMPAT\_EXTRA\_ISIZE). + * - 0x80 + - This filesystem has a snapshot (RO\_COMPAT\_HAS\_SNAPSHOT). + * - 0x100 + - `Quota <Quota>`__ (RO\_COMPAT\_QUOTA). + * - 0x200 + - This filesystem supports “bigalloc”, which means that file extents are + tracked in units of clusters (of blocks) instead of blocks + (RO\_COMPAT\_BIGALLOC). + * - 0x400 + - This filesystem supports metadata checksumming. + (RO\_COMPAT\_METADATA\_CSUM; implies RO\_COMPAT\_GDT\_CSUM, though + GDT\_CSUM must not be set) + * - 0x800 + - Filesystem supports replicas. This feature is neither in the kernel nor + e2fsprogs. (RO\_COMPAT\_REPLICA) + * - 0x1000 + - Read-only filesystem image; the kernel will not mount this image + read-write and most tools will refuse to write to the image. + (RO\_COMPAT\_READONLY) + * - 0x2000 + - Filesystem tracks project quotas. (RO\_COMPAT\_PROJECT) + * - 0x8000 + - Verity inodes may be present on the filesystem. (RO\_COMPAT\_VERITY) + +.. _super_def_hash: + +The ``s_def_hash_version`` field is one of the following: + +.. list-table:: + :widths: 8 72 + :header-rows: 1 + + * - Value + - Description + * - 0x0 + - Legacy. + * - 0x1 + - Half MD4. + * - 0x2 + - Tea. + * - 0x3 + - Legacy, unsigned. + * - 0x4 + - Half MD4, unsigned. + * - 0x5 + - Tea, unsigned. + +.. _super_mountopts: + +The ``s_default_mount_opts`` field is any combination of the following: + +.. list-table:: + :widths: 8 72 + :header-rows: 1 + + * - Value + - Description + * - 0x0001 + - Print debugging info upon (re)mount. (EXT4\_DEFM\_DEBUG) + * - 0x0002 + - New files take the gid of the containing directory (instead of the fsgid + of the current process). (EXT4\_DEFM\_BSDGROUPS) + * - 0x0004 + - Support userspace-provided extended attributes. (EXT4\_DEFM\_XATTR\_USER) + * - 0x0008 + - Support POSIX access control lists (ACLs). (EXT4\_DEFM\_ACL) + * - 0x0010 + - Do not support 32-bit UIDs. (EXT4\_DEFM\_UID16) + * - 0x0020 + - All data and metadata are commited to the journal. + (EXT4\_DEFM\_JMODE\_DATA) + * - 0x0040 + - All data are flushed to the disk before metadata are committed to the + journal. (EXT4\_DEFM\_JMODE\_ORDERED) + * - 0x0060 + - Data ordering is not preserved; data may be written after the metadata + has been written. (EXT4\_DEFM\_JMODE\_WBACK) + * - 0x0100 + - Disable write flushes. (EXT4\_DEFM\_NOBARRIER) + * - 0x0200 + - Track which blocks in a filesystem are metadata and therefore should not + be used as data blocks. This option will be enabled by default on 3.18, + hopefully. (EXT4\_DEFM\_BLOCK\_VALIDITY) + * - 0x0400 + - Enable DISCARD support, where the storage device is told about blocks + becoming unused. (EXT4\_DEFM\_DISCARD) + * - 0x0800 + - Disable delayed allocation. (EXT4\_DEFM\_NODELALLOC) + +.. _super_flags: + +The ``s_flags`` field is any combination of the following: + +.. list-table:: + :widths: 8 72 + :header-rows: 1 + + * - Value + - Description + * - 0x0001 + - Signed directory hash in use. + * - 0x0002 + - Unsigned directory hash in use. + * - 0x0004 + - To test development code. + +.. _super_encrypt: + +The ``s_encrypt_algos`` list can contain any of the following: + +.. list-table:: + :widths: 8 72 + :header-rows: 1 + + * - Value + - Description + * - 0 + - Invalid algorithm (ENCRYPTION\_MODE\_INVALID). + * - 1 + - 256-bit AES in XTS mode (ENCRYPTION\_MODE\_AES\_256\_XTS). + * - 2 + - 256-bit AES in GCM mode (ENCRYPTION\_MODE\_AES\_256\_GCM). + * - 3 + - 256-bit AES in CBC mode (ENCRYPTION\_MODE\_AES\_256\_CBC). + +Total size of the superblock is 1024 bytes. diff --git a/Documentation/filesystems/ext4/verity.rst b/Documentation/filesystems/ext4/verity.rst new file mode 100644 index 000000000..e99ff3fd0 --- /dev/null +++ b/Documentation/filesystems/ext4/verity.rst @@ -0,0 +1,44 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Verity files +------------ + +ext4 supports fs-verity, which is a filesystem feature that provides +Merkle tree based hashing for individual readonly files. Most of +fs-verity is common to all filesystems that support it; see +:ref:`Documentation/filesystems/fsverity.rst <fsverity>` for the +fs-verity documentation. However, the on-disk layout of the verity +metadata is filesystem-specific. On ext4, the verity metadata is +stored after the end of the file data itself, in the following format: + +- Zero-padding to the next 65536-byte boundary. This padding need not + actually be allocated on-disk, i.e. it may be a hole. + +- The Merkle tree, as documented in + :ref:`Documentation/filesystems/fsverity.rst + <fsverity_merkle_tree>`, with the tree levels stored in order from + root to leaf, and the tree blocks within each level stored in their + natural order. + +- Zero-padding to the next filesystem block boundary. + +- The verity descriptor, as documented in + :ref:`Documentation/filesystems/fsverity.rst <fsverity_descriptor>`, + with optionally appended signature blob. + +- Zero-padding to the next offset that is 4 bytes before a filesystem + block boundary. + +- The size of the verity descriptor in bytes, as a 4-byte little + endian integer. + +Verity inodes have EXT4_VERITY_FL set, and they must use extents, i.e. +EXT4_EXTENTS_FL must be set and EXT4_INLINE_DATA_FL must be clear. +They can have EXT4_ENCRYPT_FL set, in which case the verity metadata +is encrypted as well as the data itself. + +Verity files cannot have blocks allocated past the end of the verity +metadata. + +Verity and DAX are not compatible and attempts to set both of these flags +on a file will fail. diff --git a/Documentation/filesystems/f2fs.rst b/Documentation/filesystems/f2fs.rst new file mode 100644 index 000000000..8c0fbdd8c --- /dev/null +++ b/Documentation/filesystems/f2fs.rst @@ -0,0 +1,826 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================================== +WHAT IS Flash-Friendly File System (F2FS)? +========================================== + +NAND flash memory-based storage devices, such as SSD, eMMC, and SD cards, have +been equipped on a variety systems ranging from mobile to server systems. Since +they are known to have different characteristics from the conventional rotating +disks, a file system, an upper layer to the storage device, should adapt to the +changes from the sketch in the design level. + +F2FS is a file system exploiting NAND flash memory-based storage devices, which +is based on Log-structured File System (LFS). The design has been focused on +addressing the fundamental issues in LFS, which are snowball effect of wandering +tree and high cleaning overhead. + +Since a NAND flash memory-based storage device shows different characteristic +according to its internal geometry or flash memory management scheme, namely FTL, +F2FS and its tools support various parameters not only for configuring on-disk +layout, but also for selecting allocation and cleaning algorithms. + +The following git tree provides the file system formatting tool (mkfs.f2fs), +a consistency checking tool (fsck.f2fs), and a debugging tool (dump.f2fs). + +- git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git + +For reporting bugs and sending patches, please use the following mailing list: + +- linux-f2fs-devel@lists.sourceforge.net + +Background and Design issues +============================ + +Log-structured File System (LFS) +-------------------------------- +"A log-structured file system writes all modifications to disk sequentially in +a log-like structure, thereby speeding up both file writing and crash recovery. +The log is the only structure on disk; it contains indexing information so that +files can be read back from the log efficiently. In order to maintain large free +areas on disk for fast writing, we divide the log into segments and use a +segment cleaner to compress the live information from heavily fragmented +segments." from Rosenblum, M. and Ousterhout, J. K., 1992, "The design and +implementation of a log-structured file system", ACM Trans. Computer Systems +10, 1, 26–52. + +Wandering Tree Problem +---------------------- +In LFS, when a file data is updated and written to the end of log, its direct +pointer block is updated due to the changed location. Then the indirect pointer +block is also updated due to the direct pointer block update. In this manner, +the upper index structures such as inode, inode map, and checkpoint block are +also updated recursively. This problem is called as wandering tree problem [1], +and in order to enhance the performance, it should eliminate or relax the update +propagation as much as possible. + +[1] Bityutskiy, A. 2005. JFFS3 design issues. http://www.linux-mtd.infradead.org/ + +Cleaning Overhead +----------------- +Since LFS is based on out-of-place writes, it produces so many obsolete blocks +scattered across the whole storage. In order to serve new empty log space, it +needs to reclaim these obsolete blocks seamlessly to users. This job is called +as a cleaning process. + +The process consists of three operations as follows. + +1. A victim segment is selected through referencing segment usage table. +2. It loads parent index structures of all the data in the victim identified by + segment summary blocks. +3. It checks the cross-reference between the data and its parent index structure. +4. It moves valid data selectively. + +This cleaning job may cause unexpected long delays, so the most important goal +is to hide the latencies to users. And also definitely, it should reduce the +amount of valid data to be moved, and move them quickly as well. + +Key Features +============ + +Flash Awareness +--------------- +- Enlarge the random write area for better performance, but provide the high + spatial locality +- Align FS data structures to the operational units in FTL as best efforts + +Wandering Tree Problem +---------------------- +- Use a term, “node”, that represents inodes as well as various pointer blocks +- Introduce Node Address Table (NAT) containing the locations of all the “node” + blocks; this will cut off the update propagation. + +Cleaning Overhead +----------------- +- Support a background cleaning process +- Support greedy and cost-benefit algorithms for victim selection policies +- Support multi-head logs for static/dynamic hot and cold data separation +- Introduce adaptive logging for efficient block allocation + +Mount Options +============= + + +======================== ============================================================ +background_gc=%s Turn on/off cleaning operations, namely garbage + collection, triggered in background when I/O subsystem is + idle. If background_gc=on, it will turn on the garbage + collection and if background_gc=off, garbage collection + will be turned off. If background_gc=sync, it will turn + on synchronous garbage collection running in background. + Default value for this option is on. So garbage + collection is on by default. +disable_roll_forward Disable the roll-forward recovery routine +norecovery Disable the roll-forward recovery routine, mounted read- + only (i.e., -o ro,disable_roll_forward) +discard/nodiscard Enable/disable real-time discard in f2fs, if discard is + enabled, f2fs will issue discard/TRIM commands when a + segment is cleaned. +no_heap Disable heap-style segment allocation which finds free + segments for data from the beginning of main area, while + for node from the end of main area. +nouser_xattr Disable Extended User Attributes. Note: xattr is enabled + by default if CONFIG_F2FS_FS_XATTR is selected. +noacl Disable POSIX Access Control List. Note: acl is enabled + by default if CONFIG_F2FS_FS_POSIX_ACL is selected. +active_logs=%u Support configuring the number of active logs. In the + current design, f2fs supports only 2, 4, and 6 logs. + Default number is 6. +disable_ext_identify Disable the extension list configured by mkfs, so f2fs + is not aware of cold files such as media files. +inline_xattr Enable the inline xattrs feature. +noinline_xattr Disable the inline xattrs feature. +inline_xattr_size=%u Support configuring inline xattr size, it depends on + flexible inline xattr feature. +inline_data Enable the inline data feature: Newly created small (<~3.4k) + files can be written into inode block. +inline_dentry Enable the inline dir feature: data in newly created + directory entries can be written into inode block. The + space of inode block which is used to store inline + dentries is limited to ~3.4k. +noinline_dentry Disable the inline dentry feature. +flush_merge Merge concurrent cache_flush commands as much as possible + to eliminate redundant command issues. If the underlying + device handles the cache_flush command relatively slowly, + recommend to enable this option. +nobarrier This option can be used if underlying storage guarantees + its cached data should be written to the novolatile area. + If this option is set, no cache_flush commands are issued + but f2fs still guarantees the write ordering of all the + data writes. +fastboot This option is used when a system wants to reduce mount + time as much as possible, even though normal performance + can be sacrificed. +extent_cache Enable an extent cache based on rb-tree, it can cache + as many as extent which map between contiguous logical + address and physical address per inode, resulting in + increasing the cache hit ratio. Set by default. +noextent_cache Disable an extent cache based on rb-tree explicitly, see + the above extent_cache mount option. +noinline_data Disable the inline data feature, inline data feature is + enabled by default. +data_flush Enable data flushing before checkpoint in order to + persist data of regular and symlink. +reserve_root=%d Support configuring reserved space which is used for + allocation from a privileged user with specified uid or + gid, unit: 4KB, the default limit is 0.2% of user blocks. +resuid=%d The user ID which may use the reserved blocks. +resgid=%d The group ID which may use the reserved blocks. +fault_injection=%d Enable fault injection in all supported types with + specified injection rate. +fault_type=%d Support configuring fault injection type, should be + enabled with fault_injection option, fault type value + is shown below, it supports single or combined type. + + =================== =========== + Type_Name Type_Value + =================== =========== + FAULT_KMALLOC 0x000000001 + FAULT_KVMALLOC 0x000000002 + FAULT_PAGE_ALLOC 0x000000004 + FAULT_PAGE_GET 0x000000008 + FAULT_ALLOC_BIO 0x000000010 + FAULT_ALLOC_NID 0x000000020 + FAULT_ORPHAN 0x000000040 + FAULT_BLOCK 0x000000080 + FAULT_DIR_DEPTH 0x000000100 + FAULT_EVICT_INODE 0x000000200 + FAULT_TRUNCATE 0x000000400 + FAULT_READ_IO 0x000000800 + FAULT_CHECKPOINT 0x000001000 + FAULT_DISCARD 0x000002000 + FAULT_WRITE_IO 0x000004000 + =================== =========== +mode=%s Control block allocation mode which supports "adaptive" + and "lfs". In "lfs" mode, there should be no random + writes towards main area. +io_bits=%u Set the bit size of write IO requests. It should be set + with "mode=lfs". +usrquota Enable plain user disk quota accounting. +grpquota Enable plain group disk quota accounting. +prjquota Enable plain project quota accounting. +usrjquota=<file> Appoint specified file and type during mount, so that quota +grpjquota=<file> information can be properly updated during recovery flow, +prjjquota=<file> <quota file>: must be in root directory; +jqfmt=<quota type> <quota type>: [vfsold,vfsv0,vfsv1]. +offusrjquota Turn off user journalled quota. +offgrpjquota Turn off group journalled quota. +offprjjquota Turn off project journalled quota. +quota Enable plain user disk quota accounting. +noquota Disable all plain disk quota option. +whint_mode=%s Control which write hints are passed down to block + layer. This supports "off", "user-based", and + "fs-based". In "off" mode (default), f2fs does not pass + down hints. In "user-based" mode, f2fs tries to pass + down hints given by users. And in "fs-based" mode, f2fs + passes down hints with its policy. +alloc_mode=%s Adjust block allocation policy, which supports "reuse" + and "default". +fsync_mode=%s Control the policy of fsync. Currently supports "posix", + "strict", and "nobarrier". In "posix" mode, which is + default, fsync will follow POSIX semantics and does a + light operation to improve the filesystem performance. + In "strict" mode, fsync will be heavy and behaves in line + with xfs, ext4 and btrfs, where xfstest generic/342 will + pass, but the performance will regress. "nobarrier" is + based on "posix", but doesn't issue flush command for + non-atomic files likewise "nobarrier" mount option. +test_dummy_encryption +test_dummy_encryption=%s + Enable dummy encryption, which provides a fake fscrypt + context. The fake fscrypt context is used by xfstests. + The argument may be either "v1" or "v2", in order to + select the corresponding fscrypt policy version. +checkpoint=%s[:%u[%]] Set to "disable" to turn off checkpointing. Set to "enable" + to reenable checkpointing. Is enabled by default. While + disabled, any unmounting or unexpected shutdowns will cause + the filesystem contents to appear as they did when the + filesystem was mounted with that option. + While mounting with checkpoint=disabled, the filesystem must + run garbage collection to ensure that all available space can + be used. If this takes too much time, the mount may return + EAGAIN. You may optionally add a value to indicate how much + of the disk you would be willing to temporarily give up to + avoid additional garbage collection. This can be given as a + number of blocks, or as a percent. For instance, mounting + with checkpoint=disable:100% would always succeed, but it may + hide up to all remaining free space. The actual space that + would be unusable can be viewed at /sys/fs/f2fs/<disk>/unusable + This space is reclaimed once checkpoint=enable. +compress_algorithm=%s Control compress algorithm, currently f2fs supports "lzo", + "lz4", "zstd" and "lzo-rle" algorithm. +compress_log_size=%u Support configuring compress cluster size, the size will + be 4KB * (1 << %u), 16KB is minimum size, also it's + default size. +compress_extension=%s Support adding specified extension, so that f2fs can enable + compression on those corresponding files, e.g. if all files + with '.ext' has high compression rate, we can set the '.ext' + on compression extension list and enable compression on + these file by default rather than to enable it via ioctl. + For other files, we can still enable compression via ioctl. + Note that, there is one reserved special extension '*', it + can be set to enable compression for all files. +inlinecrypt When possible, encrypt/decrypt the contents of encrypted + files using the blk-crypto framework rather than + filesystem-layer encryption. This allows the use of + inline encryption hardware. The on-disk format is + unaffected. For more details, see + Documentation/block/inline-encryption.rst. +atgc Enable age-threshold garbage collection, it provides high + effectiveness and efficiency on background GC. +======================== ============================================================ + +Debugfs Entries +=============== + +/sys/kernel/debug/f2fs/ contains information about all the partitions mounted as +f2fs. Each file shows the whole f2fs information. + +/sys/kernel/debug/f2fs/status includes: + + - major file system information managed by f2fs currently + - average SIT information about whole segments + - current memory footprint consumed by f2fs. + +Sysfs Entries +============= + +Information about mounted f2fs file systems can be found in +/sys/fs/f2fs. Each mounted filesystem will have a directory in +/sys/fs/f2fs based on its device name (i.e., /sys/fs/f2fs/sda). +The files in each per-device directory are shown in table below. + +Files in /sys/fs/f2fs/<devname> +(see also Documentation/ABI/testing/sysfs-fs-f2fs) + +Usage +===== + +1. Download userland tools and compile them. + +2. Skip, if f2fs was compiled statically inside kernel. + Otherwise, insert the f2fs.ko module:: + + # insmod f2fs.ko + +3. Create a directory to use when mounting:: + + # mkdir /mnt/f2fs + +4. Format the block device, and then mount as f2fs:: + + # mkfs.f2fs -l label /dev/block_device + # mount -t f2fs /dev/block_device /mnt/f2fs + +mkfs.f2fs +--------- +The mkfs.f2fs is for the use of formatting a partition as the f2fs filesystem, +which builds a basic on-disk layout. + +The quick options consist of: + +=============== =========================================================== +``-l [label]`` Give a volume label, up to 512 unicode name. +``-a [0 or 1]`` Split start location of each area for heap-based allocation. + + 1 is set by default, which performs this. +``-o [int]`` Set overprovision ratio in percent over volume size. + + 5 is set by default. +``-s [int]`` Set the number of segments per section. + + 1 is set by default. +``-z [int]`` Set the number of sections per zone. + + 1 is set by default. +``-e [str]`` Set basic extension list. e.g. "mp3,gif,mov" +``-t [0 or 1]`` Disable discard command or not. + + 1 is set by default, which conducts discard. +=============== =========================================================== + +Note: please refer to the manpage of mkfs.f2fs(8) to get full option list. + +fsck.f2fs +--------- +The fsck.f2fs is a tool to check the consistency of an f2fs-formatted +partition, which examines whether the filesystem metadata and user-made data +are cross-referenced correctly or not. +Note that, initial version of the tool does not fix any inconsistency. + +The quick options consist of:: + + -d debug level [default:0] + +Note: please refer to the manpage of fsck.f2fs(8) to get full option list. + +dump.f2fs +--------- +The dump.f2fs shows the information of specific inode and dumps SSA and SIT to +file. Each file is dump_ssa and dump_sit. + +The dump.f2fs is used to debug on-disk data structures of the f2fs filesystem. +It shows on-disk inode information recognized by a given inode number, and is +able to dump all the SSA and SIT entries into predefined files, ./dump_ssa and +./dump_sit respectively. + +The options consist of:: + + -d debug level [default:0] + -i inode no (hex) + -s [SIT dump segno from #1~#2 (decimal), for all 0~-1] + -a [SSA dump segno from #1~#2 (decimal), for all 0~-1] + +Examples:: + + # dump.f2fs -i [ino] /dev/sdx + # dump.f2fs -s 0~-1 /dev/sdx (SIT dump) + # dump.f2fs -a 0~-1 /dev/sdx (SSA dump) + +Note: please refer to the manpage of dump.f2fs(8) to get full option list. + +sload.f2fs +---------- +The sload.f2fs gives a way to insert files and directories in the exisiting disk +image. This tool is useful when building f2fs images given compiled files. + +Note: please refer to the manpage of sload.f2fs(8) to get full option list. + +resize.f2fs +----------- +The resize.f2fs lets a user resize the f2fs-formatted disk image, while preserving +all the files and directories stored in the image. + +Note: please refer to the manpage of resize.f2fs(8) to get full option list. + +defrag.f2fs +----------- +The defrag.f2fs can be used to defragment scattered written data as well as +filesystem metadata across the disk. This can improve the write speed by giving +more free consecutive space. + +Note: please refer to the manpage of defrag.f2fs(8) to get full option list. + +f2fs_io +------- +The f2fs_io is a simple tool to issue various filesystem APIs as well as +f2fs-specific ones, which is very useful for QA tests. + +Note: please refer to the manpage of f2fs_io(8) to get full option list. + +Design +====== + +On-disk Layout +-------------- + +F2FS divides the whole volume into a number of segments, each of which is fixed +to 2MB in size. A section is composed of consecutive segments, and a zone +consists of a set of sections. By default, section and zone sizes are set to one +segment size identically, but users can easily modify the sizes by mkfs. + +F2FS splits the entire volume into six areas, and all the areas except superblock +consist of multiple segments as described below:: + + align with the zone size <-| + |-> align with the segment size + _________________________________________________________________________ + | | | Segment | Node | Segment | | + | Superblock | Checkpoint | Info. | Address | Summary | Main | + | (SB) | (CP) | Table (SIT) | Table (NAT) | Area (SSA) | | + |____________|_____2______|______N______|______N______|______N_____|__N___| + . . + . . + . . + ._________________________________________. + |_Segment_|_..._|_Segment_|_..._|_Segment_| + . . + ._________._________ + |_section_|__...__|_ + . . + .________. + |__zone__| + +- Superblock (SB) + It is located at the beginning of the partition, and there exist two copies + to avoid file system crash. It contains basic partition information and some + default parameters of f2fs. + +- Checkpoint (CP) + It contains file system information, bitmaps for valid NAT/SIT sets, orphan + inode lists, and summary entries of current active segments. + +- Segment Information Table (SIT) + It contains segment information such as valid block count and bitmap for the + validity of all the blocks. + +- Node Address Table (NAT) + It is composed of a block address table for all the node blocks stored in + Main area. + +- Segment Summary Area (SSA) + It contains summary entries which contains the owner information of all the + data and node blocks stored in Main area. + +- Main Area + It contains file and directory data including their indices. + +In order to avoid misalignment between file system and flash-based storage, F2FS +aligns the start block address of CP with the segment size. Also, it aligns the +start block address of Main area with the zone size by reserving some segments +in SSA area. + +Reference the following survey for additional technical details. +https://wiki.linaro.org/WorkingGroups/Kernel/Projects/FlashCardSurvey + +File System Metadata Structure +------------------------------ + +F2FS adopts the checkpointing scheme to maintain file system consistency. At +mount time, F2FS first tries to find the last valid checkpoint data by scanning +CP area. In order to reduce the scanning time, F2FS uses only two copies of CP. +One of them always indicates the last valid data, which is called as shadow copy +mechanism. In addition to CP, NAT and SIT also adopt the shadow copy mechanism. + +For file system consistency, each CP points to which NAT and SIT copies are +valid, as shown as below:: + + +--------+----------+---------+ + | CP | SIT | NAT | + +--------+----------+---------+ + . . . . + . . . . + . . . . + +-------+-------+--------+--------+--------+--------+ + | CP #0 | CP #1 | SIT #0 | SIT #1 | NAT #0 | NAT #1 | + +-------+-------+--------+--------+--------+--------+ + | ^ ^ + | | | + `----------------------------------------' + +Index Structure +--------------- + +The key data structure to manage the data locations is a "node". Similar to +traditional file structures, F2FS has three types of node: inode, direct node, +indirect node. F2FS assigns 4KB to an inode block which contains 923 data block +indices, two direct node pointers, two indirect node pointers, and one double +indirect node pointer as described below. One direct node block contains 1018 +data blocks, and one indirect node block contains also 1018 node blocks. Thus, +one inode block (i.e., a file) covers:: + + 4KB * (923 + 2 * 1018 + 2 * 1018 * 1018 + 1018 * 1018 * 1018) := 3.94TB. + + Inode block (4KB) + |- data (923) + |- direct node (2) + | `- data (1018) + |- indirect node (2) + | `- direct node (1018) + | `- data (1018) + `- double indirect node (1) + `- indirect node (1018) + `- direct node (1018) + `- data (1018) + +Note that all the node blocks are mapped by NAT which means the location of +each node is translated by the NAT table. In the consideration of the wandering +tree problem, F2FS is able to cut off the propagation of node updates caused by +leaf data writes. + +Directory Structure +------------------- + +A directory entry occupies 11 bytes, which consists of the following attributes. + +- hash hash value of the file name +- ino inode number +- len the length of file name +- type file type such as directory, symlink, etc + +A dentry block consists of 214 dentry slots and file names. Therein a bitmap is +used to represent whether each dentry is valid or not. A dentry block occupies +4KB with the following composition. + +:: + + Dentry Block(4 K) = bitmap (27 bytes) + reserved (3 bytes) + + dentries(11 * 214 bytes) + file name (8 * 214 bytes) + + [Bucket] + +--------------------------------+ + |dentry block 1 | dentry block 2 | + +--------------------------------+ + . . + . . + . [Dentry Block Structure: 4KB] . + +--------+----------+----------+------------+ + | bitmap | reserved | dentries | file names | + +--------+----------+----------+------------+ + [Dentry Block: 4KB] . . + . . + . . + +------+------+-----+------+ + | hash | ino | len | type | + +------+------+-----+------+ + [Dentry Structure: 11 bytes] + +F2FS implements multi-level hash tables for directory structure. Each level has +a hash table with dedicated number of hash buckets as shown below. Note that +"A(2B)" means a bucket includes 2 data blocks. + +:: + + ---------------------- + A : bucket + B : block + N : MAX_DIR_HASH_DEPTH + ---------------------- + + level #0 | A(2B) + | + level #1 | A(2B) - A(2B) + | + level #2 | A(2B) - A(2B) - A(2B) - A(2B) + . | . . . . + level #N/2 | A(2B) - A(2B) - A(2B) - A(2B) - A(2B) - ... - A(2B) + . | . . . . + level #N | A(4B) - A(4B) - A(4B) - A(4B) - A(4B) - ... - A(4B) + +The number of blocks and buckets are determined by:: + + ,- 2, if n < MAX_DIR_HASH_DEPTH / 2, + # of blocks in level #n = | + `- 4, Otherwise + + ,- 2^(n + dir_level), + | if n + dir_level < MAX_DIR_HASH_DEPTH / 2, + # of buckets in level #n = | + `- 2^((MAX_DIR_HASH_DEPTH / 2) - 1), + Otherwise + +When F2FS finds a file name in a directory, at first a hash value of the file +name is calculated. Then, F2FS scans the hash table in level #0 to find the +dentry consisting of the file name and its inode number. If not found, F2FS +scans the next hash table in level #1. In this way, F2FS scans hash tables in +each levels incrementally from 1 to N. In each level F2FS needs to scan only +one bucket determined by the following equation, which shows O(log(# of files)) +complexity:: + + bucket number to scan in level #n = (hash value) % (# of buckets in level #n) + +In the case of file creation, F2FS finds empty consecutive slots that cover the +file name. F2FS searches the empty slots in the hash tables of whole levels from +1 to N in the same way as the lookup operation. + +The following figure shows an example of two cases holding children:: + + --------------> Dir <-------------- + | | + child child + + child - child [hole] - child + + child - child - child [hole] - [hole] - child + + Case 1: Case 2: + Number of children = 6, Number of children = 3, + File size = 7 File size = 7 + +Default Block Allocation +------------------------ + +At runtime, F2FS manages six active logs inside "Main" area: Hot/Warm/Cold node +and Hot/Warm/Cold data. + +- Hot node contains direct node blocks of directories. +- Warm node contains direct node blocks except hot node blocks. +- Cold node contains indirect node blocks +- Hot data contains dentry blocks +- Warm data contains data blocks except hot and cold data blocks +- Cold data contains multimedia data or migrated data blocks + +LFS has two schemes for free space management: threaded log and copy-and-compac- +tion. The copy-and-compaction scheme which is known as cleaning, is well-suited +for devices showing very good sequential write performance, since free segments +are served all the time for writing new data. However, it suffers from cleaning +overhead under high utilization. Contrarily, the threaded log scheme suffers +from random writes, but no cleaning process is needed. F2FS adopts a hybrid +scheme where the copy-and-compaction scheme is adopted by default, but the +policy is dynamically changed to the threaded log scheme according to the file +system status. + +In order to align F2FS with underlying flash-based storage, F2FS allocates a +segment in a unit of section. F2FS expects that the section size would be the +same as the unit size of garbage collection in FTL. Furthermore, with respect +to the mapping granularity in FTL, F2FS allocates each section of the active +logs from different zones as much as possible, since FTL can write the data in +the active logs into one allocation unit according to its mapping granularity. + +Cleaning process +---------------- + +F2FS does cleaning both on demand and in the background. On-demand cleaning is +triggered when there are not enough free segments to serve VFS calls. Background +cleaner is operated by a kernel thread, and triggers the cleaning job when the +system is idle. + +F2FS supports two victim selection policies: greedy and cost-benefit algorithms. +In the greedy algorithm, F2FS selects a victim segment having the smallest number +of valid blocks. In the cost-benefit algorithm, F2FS selects a victim segment +according to the segment age and the number of valid blocks in order to address +log block thrashing problem in the greedy algorithm. F2FS adopts the greedy +algorithm for on-demand cleaner, while background cleaner adopts cost-benefit +algorithm. + +In order to identify whether the data in the victim segment are valid or not, +F2FS manages a bitmap. Each bit represents the validity of a block, and the +bitmap is composed of a bit stream covering whole blocks in main area. + +Write-hint Policy +----------------- + +1) whint_mode=off. F2FS only passes down WRITE_LIFE_NOT_SET. + +2) whint_mode=user-based. F2FS tries to pass down hints given by +users. + +===================== ======================== =================== +User F2FS Block +===================== ======================== =================== +N/A META WRITE_LIFE_NOT_SET +N/A HOT_NODE " +N/A WARM_NODE " +N/A COLD_NODE " +ioctl(COLD) COLD_DATA WRITE_LIFE_EXTREME +extension list " " + +-- buffered io +WRITE_LIFE_EXTREME COLD_DATA WRITE_LIFE_EXTREME +WRITE_LIFE_SHORT HOT_DATA WRITE_LIFE_SHORT +WRITE_LIFE_NOT_SET WARM_DATA WRITE_LIFE_NOT_SET +WRITE_LIFE_NONE " " +WRITE_LIFE_MEDIUM " " +WRITE_LIFE_LONG " " + +-- direct io +WRITE_LIFE_EXTREME COLD_DATA WRITE_LIFE_EXTREME +WRITE_LIFE_SHORT HOT_DATA WRITE_LIFE_SHORT +WRITE_LIFE_NOT_SET WARM_DATA WRITE_LIFE_NOT_SET +WRITE_LIFE_NONE " WRITE_LIFE_NONE +WRITE_LIFE_MEDIUM " WRITE_LIFE_MEDIUM +WRITE_LIFE_LONG " WRITE_LIFE_LONG +===================== ======================== =================== + +3) whint_mode=fs-based. F2FS passes down hints with its policy. + +===================== ======================== =================== +User F2FS Block +===================== ======================== =================== +N/A META WRITE_LIFE_MEDIUM; +N/A HOT_NODE WRITE_LIFE_NOT_SET +N/A WARM_NODE " +N/A COLD_NODE WRITE_LIFE_NONE +ioctl(COLD) COLD_DATA WRITE_LIFE_EXTREME +extension list " " + +-- buffered io +WRITE_LIFE_EXTREME COLD_DATA WRITE_LIFE_EXTREME +WRITE_LIFE_SHORT HOT_DATA WRITE_LIFE_SHORT +WRITE_LIFE_NOT_SET WARM_DATA WRITE_LIFE_LONG +WRITE_LIFE_NONE " " +WRITE_LIFE_MEDIUM " " +WRITE_LIFE_LONG " " + +-- direct io +WRITE_LIFE_EXTREME COLD_DATA WRITE_LIFE_EXTREME +WRITE_LIFE_SHORT HOT_DATA WRITE_LIFE_SHORT +WRITE_LIFE_NOT_SET WARM_DATA WRITE_LIFE_NOT_SET +WRITE_LIFE_NONE " WRITE_LIFE_NONE +WRITE_LIFE_MEDIUM " WRITE_LIFE_MEDIUM +WRITE_LIFE_LONG " WRITE_LIFE_LONG +===================== ======================== =================== + +Fallocate(2) Policy +------------------- + +The default policy follows the below POSIX rule. + +Allocating disk space + The default operation (i.e., mode is zero) of fallocate() allocates + the disk space within the range specified by offset and len. The + file size (as reported by stat(2)) will be changed if offset+len is + greater than the file size. Any subregion within the range specified + by offset and len that did not contain data before the call will be + initialized to zero. This default behavior closely resembles the + behavior of the posix_fallocate(3) library function, and is intended + as a method of optimally implementing that function. + +However, once F2FS receives ioctl(fd, F2FS_IOC_SET_PIN_FILE) in prior to +fallocate(fd, DEFAULT_MODE), it allocates on-disk block addressess having +zero or random data, which is useful to the below scenario where: + + 1. create(fd) + 2. ioctl(fd, F2FS_IOC_SET_PIN_FILE) + 3. fallocate(fd, 0, 0, size) + 4. address = fibmap(fd, offset) + 5. open(blkdev) + 6. write(blkdev, address) + +Compression implementation +-------------------------- + +- New term named cluster is defined as basic unit of compression, file can + be divided into multiple clusters logically. One cluster includes 4 << n + (n >= 0) logical pages, compression size is also cluster size, each of + cluster can be compressed or not. + +- In cluster metadata layout, one special block address is used to indicate + a cluster is a compressed one or normal one; for compressed cluster, following + metadata maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs + stores data including compress header and compressed data. + +- In order to eliminate write amplification during overwrite, F2FS only + support compression on write-once file, data can be compressed only when + all logical blocks in cluster contain valid data and compress ratio of + cluster data is lower than specified threshold. + +- To enable compression on regular inode, there are three ways: + + * chattr +c file + * chattr +c dir; touch dir/file + * mount w/ -o compress_extension=ext; touch file.ext + +Compress metadata layout:: + + [Dnode Structure] + +-----------------------------------------------+ + | cluster 1 | cluster 2 | ......... | cluster N | + +-----------------------------------------------+ + . . . . + . . . . + . Compressed Cluster . . Normal Cluster . + +----------+---------+---------+---------+ +---------+---------+---------+---------+ + |compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 | + +----------+---------+---------+---------+ +---------+---------+---------+---------+ + . . + . . + . . + +-------------+-------------+----------+----------------------------+ + | data length | data chksum | reserved | compressed data | + +-------------+-------------+----------+----------------------------+ + +NVMe Zoned Namespace devices +---------------------------- + +- ZNS defines a per-zone capacity which can be equal or less than the + zone-size. Zone-capacity is the number of usable blocks in the zone. + F2FS checks if zone-capacity is less than zone-size, if it is, then any + segment which starts after the zone-capacity is marked as not-free in + the free segment bitmap at initial mount time. These segments are marked + as permanently used so they are not allocated for writes and + consequently are not needed to be garbage collected. In case the + zone-capacity is not aligned to default segment size(2MB), then a segment + can start before the zone-capacity and span across zone-capacity boundary. + Such spanning segments are also considered as usable segments. All blocks + past the zone-capacity are considered unusable in these segments. diff --git a/Documentation/filesystems/fiemap.rst b/Documentation/filesystems/fiemap.rst new file mode 100644 index 000000000..93fc96f76 --- /dev/null +++ b/Documentation/filesystems/fiemap.rst @@ -0,0 +1,236 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============ +Fiemap Ioctl +============ + +The fiemap ioctl is an efficient method for userspace to get file +extent mappings. Instead of block-by-block mapping (such as bmap), fiemap +returns a list of extents. + + +Request Basics +-------------- + +A fiemap request is encoded within struct fiemap:: + + struct fiemap { + __u64 fm_start; /* logical offset (inclusive) at + * which to start mapping (in) */ + __u64 fm_length; /* logical length of mapping which + * userspace cares about (in) */ + __u32 fm_flags; /* FIEMAP_FLAG_* flags for request (in/out) */ + __u32 fm_mapped_extents; /* number of extents that were + * mapped (out) */ + __u32 fm_extent_count; /* size of fm_extents array (in) */ + __u32 fm_reserved; + struct fiemap_extent fm_extents[0]; /* array of mapped extents (out) */ + }; + + +fm_start, and fm_length specify the logical range within the file +which the process would like mappings for. Extents returned mirror +those on disk - that is, the logical offset of the 1st returned extent +may start before fm_start, and the range covered by the last returned +extent may end after fm_length. All offsets and lengths are in bytes. + +Certain flags to modify the way in which mappings are looked up can be +set in fm_flags. If the kernel doesn't understand some particular +flags, it will return EBADR and the contents of fm_flags will contain +the set of flags which caused the error. If the kernel is compatible +with all flags passed, the contents of fm_flags will be unmodified. +It is up to userspace to determine whether rejection of a particular +flag is fatal to its operation. This scheme is intended to allow the +fiemap interface to grow in the future but without losing +compatibility with old software. + +fm_extent_count specifies the number of elements in the fm_extents[] array +that can be used to return extents. If fm_extent_count is zero, then the +fm_extents[] array is ignored (no extents will be returned), and the +fm_mapped_extents count will hold the number of extents needed in +fm_extents[] to hold the file's current mapping. Note that there is +nothing to prevent the file from changing between calls to FIEMAP. + +The following flags can be set in fm_flags: + +FIEMAP_FLAG_SYNC + If this flag is set, the kernel will sync the file before mapping extents. + +FIEMAP_FLAG_XATTR + If this flag is set, the extents returned will describe the inodes + extended attribute lookup tree, instead of its data tree. + + +Extent Mapping +-------------- + +Extent information is returned within the embedded fm_extents array +which userspace must allocate along with the fiemap structure. The +number of elements in the fiemap_extents[] array should be passed via +fm_extent_count. The number of extents mapped by kernel will be +returned via fm_mapped_extents. If the number of fiemap_extents +allocated is less than would be required to map the requested range, +the maximum number of extents that can be mapped in the fm_extent[] +array will be returned and fm_mapped_extents will be equal to +fm_extent_count. In that case, the last extent in the array will not +complete the requested range and will not have the FIEMAP_EXTENT_LAST +flag set (see the next section on extent flags). + +Each extent is described by a single fiemap_extent structure as +returned in fm_extents:: + + struct fiemap_extent { + __u64 fe_logical; /* logical offset in bytes for the start of + * the extent */ + __u64 fe_physical; /* physical offset in bytes for the start + * of the extent */ + __u64 fe_length; /* length in bytes for the extent */ + __u64 fe_reserved64[2]; + __u32 fe_flags; /* FIEMAP_EXTENT_* flags for this extent */ + __u32 fe_reserved[3]; + }; + +All offsets and lengths are in bytes and mirror those on disk. It is valid +for an extents logical offset to start before the request or its logical +length to extend past the request. Unless FIEMAP_EXTENT_NOT_ALIGNED is +returned, fe_logical, fe_physical, and fe_length will be aligned to the +block size of the file system. With the exception of extents flagged as +FIEMAP_EXTENT_MERGED, adjacent extents will not be merged. + +The fe_flags field contains flags which describe the extent returned. +A special flag, FIEMAP_EXTENT_LAST is always set on the last extent in +the file so that the process making fiemap calls can determine when no +more extents are available, without having to call the ioctl again. + +Some flags are intentionally vague and will always be set in the +presence of other more specific flags. This way a program looking for +a general property does not have to know all existing and future flags +which imply that property. + +For example, if FIEMAP_EXTENT_DATA_INLINE or FIEMAP_EXTENT_DATA_TAIL +are set, FIEMAP_EXTENT_NOT_ALIGNED will also be set. A program looking +for inline or tail-packed data can key on the specific flag. Software +which simply cares not to try operating on non-aligned extents +however, can just key on FIEMAP_EXTENT_NOT_ALIGNED, and not have to +worry about all present and future flags which might imply unaligned +data. Note that the opposite is not true - it would be valid for +FIEMAP_EXTENT_NOT_ALIGNED to appear alone. + +FIEMAP_EXTENT_LAST + This is generally the last extent in the file. A mapping attempt past + this extent may return nothing. Some implementations set this flag to + indicate this extent is the last one in the range queried by the user + (via fiemap->fm_length). + +FIEMAP_EXTENT_UNKNOWN + The location of this extent is currently unknown. This may indicate + the data is stored on an inaccessible volume or that no storage has + been allocated for the file yet. + +FIEMAP_EXTENT_DELALLOC + This will also set FIEMAP_EXTENT_UNKNOWN. + + Delayed allocation - while there is data for this extent, its + physical location has not been allocated yet. + +FIEMAP_EXTENT_ENCODED + This extent does not consist of plain filesystem blocks but is + encoded (e.g. encrypted or compressed). Reading the data in this + extent via I/O to the block device will have undefined results. + +Note that it is *always* undefined to try to update the data +in-place by writing to the indicated location without the +assistance of the filesystem, or to access the data using the +information returned by the FIEMAP interface while the filesystem +is mounted. In other words, user applications may only read the +extent data via I/O to the block device while the filesystem is +unmounted, and then only if the FIEMAP_EXTENT_ENCODED flag is +clear; user applications must not try reading or writing to the +filesystem via the block device under any other circumstances. + +FIEMAP_EXTENT_DATA_ENCRYPTED + This will also set FIEMAP_EXTENT_ENCODED + The data in this extent has been encrypted by the file system. + +FIEMAP_EXTENT_NOT_ALIGNED + Extent offsets and length are not guaranteed to be block aligned. + +FIEMAP_EXTENT_DATA_INLINE + This will also set FIEMAP_EXTENT_NOT_ALIGNED + Data is located within a meta data block. + +FIEMAP_EXTENT_DATA_TAIL + This will also set FIEMAP_EXTENT_NOT_ALIGNED + Data is packed into a block with data from other files. + +FIEMAP_EXTENT_UNWRITTEN + Unwritten extent - the extent is allocated but its data has not been + initialized. This indicates the extent's data will be all zero if read + through the filesystem but the contents are undefined if read directly from + the device. + +FIEMAP_EXTENT_MERGED + This will be set when a file does not support extents, i.e., it uses a block + based addressing scheme. Since returning an extent for each block back to + userspace would be highly inefficient, the kernel will try to merge most + adjacent blocks into 'extents'. + + +VFS -> File System Implementation +--------------------------------- + +File systems wishing to support fiemap must implement a ->fiemap callback on +their inode_operations structure. The fs ->fiemap call is responsible for +defining its set of supported fiemap flags, and calling a helper function on +each discovered extent:: + + struct inode_operations { + ... + + int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start, + u64 len); + +->fiemap is passed struct fiemap_extent_info which describes the +fiemap request:: + + struct fiemap_extent_info { + unsigned int fi_flags; /* Flags as passed from user */ + unsigned int fi_extents_mapped; /* Number of mapped extents */ + unsigned int fi_extents_max; /* Size of fiemap_extent array */ + struct fiemap_extent *fi_extents_start; /* Start of fiemap_extent array */ + }; + +It is intended that the file system should not need to access any of this +structure directly. Filesystem handlers should be tolerant to signals and return +EINTR once fatal signal received. + + +Flag checking should be done at the beginning of the ->fiemap callback via the +fiemap_prep() helper:: + + int fiemap_prep(struct inode *inode, struct fiemap_extent_info *fieinfo, + u64 start, u64 *len, u32 supported_flags); + +The struct fieinfo should be passed in as received from ioctl_fiemap(). The +set of fiemap flags which the fs understands should be passed via fs_flags. If +fiemap_prep finds invalid user flags, it will place the bad values in +fieinfo->fi_flags and return -EBADR. If the file system gets -EBADR, from +fiemap_prep(), it should immediately exit, returning that error back to +ioctl_fiemap(). Additionally the range is validate against the supported +maximum file size. + + +For each extent in the request range, the file system should call +the helper function, fiemap_fill_next_extent():: + + int fiemap_fill_next_extent(struct fiemap_extent_info *info, u64 logical, + u64 phys, u64 len, u32 flags, u32 dev); + +fiemap_fill_next_extent() will use the passed values to populate the +next free extent in the fm_extents array. 'General' extent flags will +automatically be set from specific flags on behalf of the calling file +system so that the userspace API is not broken. + +fiemap_fill_next_extent() returns 0 on success, and 1 when the +user-supplied fm_extents array is full. If an error is encountered +while copying the extent to user memory, -EFAULT will be returned. diff --git a/Documentation/filesystems/files.rst b/Documentation/filesystems/files.rst new file mode 100644 index 000000000..cbf8e5737 --- /dev/null +++ b/Documentation/filesystems/files.rst @@ -0,0 +1,128 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================================== +File management in the Linux kernel +=================================== + +This document describes how locking for files (struct file) +and file descriptor table (struct files) works. + +Up until 2.6.12, the file descriptor table has been protected +with a lock (files->file_lock) and reference count (files->count). +->file_lock protected accesses to all the file related fields +of the table. ->count was used for sharing the file descriptor +table between tasks cloned with CLONE_FILES flag. Typically +this would be the case for posix threads. As with the common +refcounting model in the kernel, the last task doing +a put_files_struct() frees the file descriptor (fd) table. +The files (struct file) themselves are protected using +reference count (->f_count). + +In the new lock-free model of file descriptor management, +the reference counting is similar, but the locking is +based on RCU. The file descriptor table contains multiple +elements - the fd sets (open_fds and close_on_exec, the +array of file pointers, the sizes of the sets and the array +etc.). In order for the updates to appear atomic to +a lock-free reader, all the elements of the file descriptor +table are in a separate structure - struct fdtable. +files_struct contains a pointer to struct fdtable through +which the actual fd table is accessed. Initially the +fdtable is embedded in files_struct itself. On a subsequent +expansion of fdtable, a new fdtable structure is allocated +and files->fdtab points to the new structure. The fdtable +structure is freed with RCU and lock-free readers either +see the old fdtable or the new fdtable making the update +appear atomic. Here are the locking rules for +the fdtable structure - + +1. All references to the fdtable must be done through + the files_fdtable() macro:: + + struct fdtable *fdt; + + rcu_read_lock(); + + fdt = files_fdtable(files); + .... + if (n <= fdt->max_fds) + .... + ... + rcu_read_unlock(); + + files_fdtable() uses rcu_dereference() macro which takes care of + the memory barrier requirements for lock-free dereference. + The fdtable pointer must be read within the read-side + critical section. + +2. Reading of the fdtable as described above must be protected + by rcu_read_lock()/rcu_read_unlock(). + +3. For any update to the fd table, files->file_lock must + be held. + +4. To look up the file structure given an fd, a reader + must use either fcheck() or fcheck_files() APIs. These + take care of barrier requirements due to lock-free lookup. + + An example:: + + struct file *file; + + rcu_read_lock(); + file = fcheck(fd); + if (file) { + ... + } + .... + rcu_read_unlock(); + +5. Handling of the file structures is special. Since the look-up + of the fd (fget()/fget_light()) are lock-free, it is possible + that look-up may race with the last put() operation on the + file structure. This is avoided using atomic_long_inc_not_zero() + on ->f_count:: + + rcu_read_lock(); + file = fcheck_files(files, fd); + if (file) { + if (atomic_long_inc_not_zero(&file->f_count)) + *fput_needed = 1; + else + /* Didn't get the reference, someone's freed */ + file = NULL; + } + rcu_read_unlock(); + .... + return file; + + atomic_long_inc_not_zero() detects if refcounts is already zero or + goes to zero during increment. If it does, we fail + fget()/fget_light(). + +6. Since both fdtable and file structures can be looked up + lock-free, they must be installed using rcu_assign_pointer() + API. If they are looked up lock-free, rcu_dereference() + must be used. However it is advisable to use files_fdtable() + and fcheck()/fcheck_files() which take care of these issues. + +7. While updating, the fdtable pointer must be looked up while + holding files->file_lock. If ->file_lock is dropped, then + another thread expand the files thereby creating a new + fdtable and making the earlier fdtable pointer stale. + + For example:: + + spin_lock(&files->file_lock); + fd = locate_fd(files, file, start); + if (fd >= 0) { + /* locate_fd() may have expanded fdtable, load the ptr */ + fdt = files_fdtable(files); + __set_open_fd(fd, fdt); + __clear_close_on_exec(fd, fdt); + spin_unlock(&files->file_lock); + ..... + + Since locate_fd() can drop ->file_lock (and reacquire ->file_lock), + the fdtable pointer (fdt) must be loaded after locate_fd(). + diff --git a/Documentation/filesystems/fscrypt.rst b/Documentation/filesystems/fscrypt.rst new file mode 100644 index 000000000..936fae06d --- /dev/null +++ b/Documentation/filesystems/fscrypt.rst @@ -0,0 +1,1300 @@ +===================================== +Filesystem-level encryption (fscrypt) +===================================== + +Introduction +============ + +fscrypt is a library which filesystems can hook into to support +transparent encryption of files and directories. + +Note: "fscrypt" in this document refers to the kernel-level portion, +implemented in ``fs/crypto/``, as opposed to the userspace tool +`fscrypt <https://github.com/google/fscrypt>`_. This document only +covers the kernel-level portion. For command-line examples of how to +use encryption, see the documentation for the userspace tool `fscrypt +<https://github.com/google/fscrypt>`_. Also, it is recommended to use +the fscrypt userspace tool, or other existing userspace tools such as +`fscryptctl <https://github.com/google/fscryptctl>`_ or `Android's key +management system +<https://source.android.com/security/encryption/file-based>`_, over +using the kernel's API directly. Using existing tools reduces the +chance of introducing your own security bugs. (Nevertheless, for +completeness this documentation covers the kernel's API anyway.) + +Unlike dm-crypt, fscrypt operates at the filesystem level rather than +at the block device level. This allows it to encrypt different files +with different keys and to have unencrypted files on the same +filesystem. This is useful for multi-user systems where each user's +data-at-rest needs to be cryptographically isolated from the others. +However, except for filenames, fscrypt does not encrypt filesystem +metadata. + +Unlike eCryptfs, which is a stacked filesystem, fscrypt is integrated +directly into supported filesystems --- currently ext4, F2FS, and +UBIFS. This allows encrypted files to be read and written without +caching both the decrypted and encrypted pages in the pagecache, +thereby nearly halving the memory used and bringing it in line with +unencrypted files. Similarly, half as many dentries and inodes are +needed. eCryptfs also limits encrypted filenames to 143 bytes, +causing application compatibility issues; fscrypt allows the full 255 +bytes (NAME_MAX). Finally, unlike eCryptfs, the fscrypt API can be +used by unprivileged users, with no need to mount anything. + +fscrypt does not support encrypting files in-place. Instead, it +supports marking an empty directory as encrypted. Then, after +userspace provides the key, all regular files, directories, and +symbolic links created in that directory tree are transparently +encrypted. + +Threat model +============ + +Offline attacks +--------------- + +Provided that userspace chooses a strong encryption key, fscrypt +protects the confidentiality of file contents and filenames in the +event of a single point-in-time permanent offline compromise of the +block device content. fscrypt does not protect the confidentiality of +non-filename metadata, e.g. file sizes, file permissions, file +timestamps, and extended attributes. Also, the existence and location +of holes (unallocated blocks which logically contain all zeroes) in +files is not protected. + +fscrypt is not guaranteed to protect confidentiality or authenticity +if an attacker is able to manipulate the filesystem offline prior to +an authorized user later accessing the filesystem. + +Online attacks +-------------- + +fscrypt (and storage encryption in general) can only provide limited +protection, if any at all, against online attacks. In detail: + +Side-channel attacks +~~~~~~~~~~~~~~~~~~~~ + +fscrypt is only resistant to side-channel attacks, such as timing or +electromagnetic attacks, to the extent that the underlying Linux +Cryptographic API algorithms are. If a vulnerable algorithm is used, +such as a table-based implementation of AES, it may be possible for an +attacker to mount a side channel attack against the online system. +Side channel attacks may also be mounted against applications +consuming decrypted data. + +Unauthorized file access +~~~~~~~~~~~~~~~~~~~~~~~~ + +After an encryption key has been added, fscrypt does not hide the +plaintext file contents or filenames from other users on the same +system. Instead, existing access control mechanisms such as file mode +bits, POSIX ACLs, LSMs, or namespaces should be used for this purpose. + +(For the reasoning behind this, understand that while the key is +added, the confidentiality of the data, from the perspective of the +system itself, is *not* protected by the mathematical properties of +encryption but rather only by the correctness of the kernel. +Therefore, any encryption-specific access control checks would merely +be enforced by kernel *code* and therefore would be largely redundant +with the wide variety of access control mechanisms already available.) + +Kernel memory compromise +~~~~~~~~~~~~~~~~~~~~~~~~ + +An attacker who compromises the system enough to read from arbitrary +memory, e.g. by mounting a physical attack or by exploiting a kernel +security vulnerability, can compromise all encryption keys that are +currently in use. + +However, fscrypt allows encryption keys to be removed from the kernel, +which may protect them from later compromise. + +In more detail, the FS_IOC_REMOVE_ENCRYPTION_KEY ioctl (or the +FS_IOC_REMOVE_ENCRYPTION_KEY_ALL_USERS ioctl) can wipe a master +encryption key from kernel memory. If it does so, it will also try to +evict all cached inodes which had been "unlocked" using the key, +thereby wiping their per-file keys and making them once again appear +"locked", i.e. in ciphertext or encrypted form. + +However, these ioctls have some limitations: + +- Per-file keys for in-use files will *not* be removed or wiped. + Therefore, for maximum effect, userspace should close the relevant + encrypted files and directories before removing a master key, as + well as kill any processes whose working directory is in an affected + encrypted directory. + +- The kernel cannot magically wipe copies of the master key(s) that + userspace might have as well. Therefore, userspace must wipe all + copies of the master key(s) it makes as well; normally this should + be done immediately after FS_IOC_ADD_ENCRYPTION_KEY, without waiting + for FS_IOC_REMOVE_ENCRYPTION_KEY. Naturally, the same also applies + to all higher levels in the key hierarchy. Userspace should also + follow other security precautions such as mlock()ing memory + containing keys to prevent it from being swapped out. + +- In general, decrypted contents and filenames in the kernel VFS + caches are freed but not wiped. Therefore, portions thereof may be + recoverable from freed memory, even after the corresponding key(s) + were wiped. To partially solve this, you can set + CONFIG_PAGE_POISONING=y in your kernel config and add page_poison=1 + to your kernel command line. However, this has a performance cost. + +- Secret keys might still exist in CPU registers, in crypto + accelerator hardware (if used by the crypto API to implement any of + the algorithms), or in other places not explicitly considered here. + +Limitations of v1 policies +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +v1 encryption policies have some weaknesses with respect to online +attacks: + +- There is no verification that the provided master key is correct. + Therefore, a malicious user can temporarily associate the wrong key + with another user's encrypted files to which they have read-only + access. Because of filesystem caching, the wrong key will then be + used by the other user's accesses to those files, even if the other + user has the correct key in their own keyring. This violates the + meaning of "read-only access". + +- A compromise of a per-file key also compromises the master key from + which it was derived. + +- Non-root users cannot securely remove encryption keys. + +All the above problems are fixed with v2 encryption policies. For +this reason among others, it is recommended to use v2 encryption +policies on all new encrypted directories. + +Key hierarchy +============= + +Master Keys +----------- + +Each encrypted directory tree is protected by a *master key*. Master +keys can be up to 64 bytes long, and must be at least as long as the +greater of the security strength of the contents and filenames +encryption modes being used. For example, if any AES-256 mode is +used, the master key must be at least 256 bits, i.e. 32 bytes. A +stricter requirement applies if the key is used by a v1 encryption +policy and AES-256-XTS is used; such keys must be 64 bytes. + +To "unlock" an encrypted directory tree, userspace must provide the +appropriate master key. There can be any number of master keys, each +of which protects any number of directory trees on any number of +filesystems. + +Master keys must be real cryptographic keys, i.e. indistinguishable +from random bytestrings of the same length. This implies that users +**must not** directly use a password as a master key, zero-pad a +shorter key, or repeat a shorter key. Security cannot be guaranteed +if userspace makes any such error, as the cryptographic proofs and +analysis would no longer apply. + +Instead, users should generate master keys either using a +cryptographically secure random number generator, or by using a KDF +(Key Derivation Function). The kernel does not do any key stretching; +therefore, if userspace derives the key from a low-entropy secret such +as a passphrase, it is critical that a KDF designed for this purpose +be used, such as scrypt, PBKDF2, or Argon2. + +Key derivation function +----------------------- + +With one exception, fscrypt never uses the master key(s) for +encryption directly. Instead, they are only used as input to a KDF +(Key Derivation Function) to derive the actual keys. + +The KDF used for a particular master key differs depending on whether +the key is used for v1 encryption policies or for v2 encryption +policies. Users **must not** use the same key for both v1 and v2 +encryption policies. (No real-world attack is currently known on this +specific case of key reuse, but its security cannot be guaranteed +since the cryptographic proofs and analysis would no longer apply.) + +For v1 encryption policies, the KDF only supports deriving per-file +encryption keys. It works by encrypting the master key with +AES-128-ECB, using the file's 16-byte nonce as the AES key. The +resulting ciphertext is used as the derived key. If the ciphertext is +longer than needed, then it is truncated to the needed length. + +For v2 encryption policies, the KDF is HKDF-SHA512. The master key is +passed as the "input keying material", no salt is used, and a distinct +"application-specific information string" is used for each distinct +key to be derived. For example, when a per-file encryption key is +derived, the application-specific information string is the file's +nonce prefixed with "fscrypt\\0" and a context byte. Different +context bytes are used for other types of derived keys. + +HKDF-SHA512 is preferred to the original AES-128-ECB based KDF because +HKDF is more flexible, is nonreversible, and evenly distributes +entropy from the master key. HKDF is also standardized and widely +used by other software, whereas the AES-128-ECB based KDF is ad-hoc. + +Per-file encryption keys +------------------------ + +Since each master key can protect many files, it is necessary to +"tweak" the encryption of each file so that the same plaintext in two +files doesn't map to the same ciphertext, or vice versa. In most +cases, fscrypt does this by deriving per-file keys. When a new +encrypted inode (regular file, directory, or symlink) is created, +fscrypt randomly generates a 16-byte nonce and stores it in the +inode's encryption xattr. Then, it uses a KDF (as described in `Key +derivation function`_) to derive the file's key from the master key +and nonce. + +Key derivation was chosen over key wrapping because wrapped keys would +require larger xattrs which would be less likely to fit in-line in the +filesystem's inode table, and there didn't appear to be any +significant advantages to key wrapping. In particular, currently +there is no requirement to support unlocking a file with multiple +alternative master keys or to support rotating master keys. Instead, +the master keys may be wrapped in userspace, e.g. as is done by the +`fscrypt <https://github.com/google/fscrypt>`_ tool. + +DIRECT_KEY policies +------------------- + +The Adiantum encryption mode (see `Encryption modes and usage`_) is +suitable for both contents and filenames encryption, and it accepts +long IVs --- long enough to hold both an 8-byte logical block number +and a 16-byte per-file nonce. Also, the overhead of each Adiantum key +is greater than that of an AES-256-XTS key. + +Therefore, to improve performance and save memory, for Adiantum a +"direct key" configuration is supported. When the user has enabled +this by setting FSCRYPT_POLICY_FLAG_DIRECT_KEY in the fscrypt policy, +per-file encryption keys are not used. Instead, whenever any data +(contents or filenames) is encrypted, the file's 16-byte nonce is +included in the IV. Moreover: + +- For v1 encryption policies, the encryption is done directly with the + master key. Because of this, users **must not** use the same master + key for any other purpose, even for other v1 policies. + +- For v2 encryption policies, the encryption is done with a per-mode + key derived using the KDF. Users may use the same master key for + other v2 encryption policies. + +IV_INO_LBLK_64 policies +----------------------- + +When FSCRYPT_POLICY_FLAG_IV_INO_LBLK_64 is set in the fscrypt policy, +the encryption keys are derived from the master key, encryption mode +number, and filesystem UUID. This normally results in all files +protected by the same master key sharing a single contents encryption +key and a single filenames encryption key. To still encrypt different +files' data differently, inode numbers are included in the IVs. +Consequently, shrinking the filesystem may not be allowed. + +This format is optimized for use with inline encryption hardware +compliant with the UFS standard, which supports only 64 IV bits per +I/O request and may have only a small number of keyslots. + +IV_INO_LBLK_32 policies +----------------------- + +IV_INO_LBLK_32 policies work like IV_INO_LBLK_64, except that for +IV_INO_LBLK_32, the inode number is hashed with SipHash-2-4 (where the +SipHash key is derived from the master key) and added to the file +logical block number mod 2^32 to produce a 32-bit IV. + +This format is optimized for use with inline encryption hardware +compliant with the eMMC v5.2 standard, which supports only 32 IV bits +per I/O request and may have only a small number of keyslots. This +format results in some level of IV reuse, so it should only be used +when necessary due to hardware limitations. + +Key identifiers +--------------- + +For master keys used for v2 encryption policies, a unique 16-byte "key +identifier" is also derived using the KDF. This value is stored in +the clear, since it is needed to reliably identify the key itself. + +Dirhash keys +------------ + +For directories that are indexed using a secret-keyed dirhash over the +plaintext filenames, the KDF is also used to derive a 128-bit +SipHash-2-4 key per directory in order to hash filenames. This works +just like deriving a per-file encryption key, except that a different +KDF context is used. Currently, only casefolded ("case-insensitive") +encrypted directories use this style of hashing. + +Encryption modes and usage +========================== + +fscrypt allows one encryption mode to be specified for file contents +and one encryption mode to be specified for filenames. Different +directory trees are permitted to use different encryption modes. +Currently, the following pairs of encryption modes are supported: + +- AES-256-XTS for contents and AES-256-CTS-CBC for filenames +- AES-128-CBC for contents and AES-128-CTS-CBC for filenames +- Adiantum for both contents and filenames + +If unsure, you should use the (AES-256-XTS, AES-256-CTS-CBC) pair. + +AES-128-CBC was added only for low-powered embedded devices with +crypto accelerators such as CAAM or CESA that do not support XTS. To +use AES-128-CBC, CONFIG_CRYPTO_ESSIV and CONFIG_CRYPTO_SHA256 (or +another SHA-256 implementation) must be enabled so that ESSIV can be +used. + +Adiantum is a (primarily) stream cipher-based mode that is fast even +on CPUs without dedicated crypto instructions. It's also a true +wide-block mode, unlike XTS. It can also eliminate the need to derive +per-file encryption keys. However, it depends on the security of two +primitives, XChaCha12 and AES-256, rather than just one. See the +paper "Adiantum: length-preserving encryption for entry-level +processors" (https://eprint.iacr.org/2018/720.pdf) for more details. +To use Adiantum, CONFIG_CRYPTO_ADIANTUM must be enabled. Also, fast +implementations of ChaCha and NHPoly1305 should be enabled, e.g. +CONFIG_CRYPTO_CHACHA20_NEON and CONFIG_CRYPTO_NHPOLY1305_NEON for ARM. + +New encryption modes can be added relatively easily, without changes +to individual filesystems. However, authenticated encryption (AE) +modes are not currently supported because of the difficulty of dealing +with ciphertext expansion. + +Contents encryption +------------------- + +For file contents, each filesystem block is encrypted independently. +Starting from Linux kernel 5.5, encryption of filesystems with block +size less than system's page size is supported. + +Each block's IV is set to the logical block number within the file as +a little endian number, except that: + +- With CBC mode encryption, ESSIV is also used. Specifically, each IV + is encrypted with AES-256 where the AES-256 key is the SHA-256 hash + of the file's data encryption key. + +- With `DIRECT_KEY policies`_, the file's nonce is appended to the IV. + Currently this is only allowed with the Adiantum encryption mode. + +- With `IV_INO_LBLK_64 policies`_, the logical block number is limited + to 32 bits and is placed in bits 0-31 of the IV. The inode number + (which is also limited to 32 bits) is placed in bits 32-63. + +- With `IV_INO_LBLK_32 policies`_, the logical block number is limited + to 32 bits and is placed in bits 0-31 of the IV. The inode number + is then hashed and added mod 2^32. + +Note that because file logical block numbers are included in the IVs, +filesystems must enforce that blocks are never shifted around within +encrypted files, e.g. via "collapse range" or "insert range". + +Filenames encryption +-------------------- + +For filenames, each full filename is encrypted at once. Because of +the requirements to retain support for efficient directory lookups and +filenames of up to 255 bytes, the same IV is used for every filename +in a directory. + +However, each encrypted directory still uses a unique key, or +alternatively has the file's nonce (for `DIRECT_KEY policies`_) or +inode number (for `IV_INO_LBLK_64 policies`_) included in the IVs. +Thus, IV reuse is limited to within a single directory. + +With CTS-CBC, the IV reuse means that when the plaintext filenames +share a common prefix at least as long as the cipher block size (16 +bytes for AES), the corresponding encrypted filenames will also share +a common prefix. This is undesirable. Adiantum does not have this +weakness, as it is a wide-block encryption mode. + +All supported filenames encryption modes accept any plaintext length +>= 16 bytes; cipher block alignment is not required. However, +filenames shorter than 16 bytes are NUL-padded to 16 bytes before +being encrypted. In addition, to reduce leakage of filename lengths +via their ciphertexts, all filenames are NUL-padded to the next 4, 8, +16, or 32-byte boundary (configurable). 32 is recommended since this +provides the best confidentiality, at the cost of making directory +entries consume slightly more space. Note that since NUL (``\0``) is +not otherwise a valid character in filenames, the padding will never +produce duplicate plaintexts. + +Symbolic link targets are considered a type of filename and are +encrypted in the same way as filenames in directory entries, except +that IV reuse is not a problem as each symlink has its own inode. + +User API +======== + +Setting an encryption policy +---------------------------- + +FS_IOC_SET_ENCRYPTION_POLICY +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The FS_IOC_SET_ENCRYPTION_POLICY ioctl sets an encryption policy on an +empty directory or verifies that a directory or regular file already +has the specified encryption policy. It takes in a pointer to +struct fscrypt_policy_v1 or struct fscrypt_policy_v2, defined as +follows:: + + #define FSCRYPT_POLICY_V1 0 + #define FSCRYPT_KEY_DESCRIPTOR_SIZE 8 + struct fscrypt_policy_v1 { + __u8 version; + __u8 contents_encryption_mode; + __u8 filenames_encryption_mode; + __u8 flags; + __u8 master_key_descriptor[FSCRYPT_KEY_DESCRIPTOR_SIZE]; + }; + #define fscrypt_policy fscrypt_policy_v1 + + #define FSCRYPT_POLICY_V2 2 + #define FSCRYPT_KEY_IDENTIFIER_SIZE 16 + struct fscrypt_policy_v2 { + __u8 version; + __u8 contents_encryption_mode; + __u8 filenames_encryption_mode; + __u8 flags; + __u8 __reserved[4]; + __u8 master_key_identifier[FSCRYPT_KEY_IDENTIFIER_SIZE]; + }; + +This structure must be initialized as follows: + +- ``version`` must be FSCRYPT_POLICY_V1 (0) if + struct fscrypt_policy_v1 is used or FSCRYPT_POLICY_V2 (2) if + struct fscrypt_policy_v2 is used. (Note: we refer to the original + policy version as "v1", though its version code is really 0.) + For new encrypted directories, use v2 policies. + +- ``contents_encryption_mode`` and ``filenames_encryption_mode`` must + be set to constants from ``<linux/fscrypt.h>`` which identify the + encryption modes to use. If unsure, use FSCRYPT_MODE_AES_256_XTS + (1) for ``contents_encryption_mode`` and FSCRYPT_MODE_AES_256_CTS + (4) for ``filenames_encryption_mode``. + +- ``flags`` contains optional flags from ``<linux/fscrypt.h>``: + + - FSCRYPT_POLICY_FLAGS_PAD_*: The amount of NUL padding to use when + encrypting filenames. If unsure, use FSCRYPT_POLICY_FLAGS_PAD_32 + (0x3). + - FSCRYPT_POLICY_FLAG_DIRECT_KEY: See `DIRECT_KEY policies`_. + - FSCRYPT_POLICY_FLAG_IV_INO_LBLK_64: See `IV_INO_LBLK_64 + policies`_. + - FSCRYPT_POLICY_FLAG_IV_INO_LBLK_32: See `IV_INO_LBLK_32 + policies`_. + + v1 encryption policies only support the PAD_* and DIRECT_KEY flags. + The other flags are only supported by v2 encryption policies. + + The DIRECT_KEY, IV_INO_LBLK_64, and IV_INO_LBLK_32 flags are + mutually exclusive. + +- For v2 encryption policies, ``__reserved`` must be zeroed. + +- For v1 encryption policies, ``master_key_descriptor`` specifies how + to find the master key in a keyring; see `Adding keys`_. It is up + to userspace to choose a unique ``master_key_descriptor`` for each + master key. The e4crypt and fscrypt tools use the first 8 bytes of + ``SHA-512(SHA-512(master_key))``, but this particular scheme is not + required. Also, the master key need not be in the keyring yet when + FS_IOC_SET_ENCRYPTION_POLICY is executed. However, it must be added + before any files can be created in the encrypted directory. + + For v2 encryption policies, ``master_key_descriptor`` has been + replaced with ``master_key_identifier``, which is longer and cannot + be arbitrarily chosen. Instead, the key must first be added using + `FS_IOC_ADD_ENCRYPTION_KEY`_. Then, the ``key_spec.u.identifier`` + the kernel returned in the struct fscrypt_add_key_arg must + be used as the ``master_key_identifier`` in + struct fscrypt_policy_v2. + +If the file is not yet encrypted, then FS_IOC_SET_ENCRYPTION_POLICY +verifies that the file is an empty directory. If so, the specified +encryption policy is assigned to the directory, turning it into an +encrypted directory. After that, and after providing the +corresponding master key as described in `Adding keys`_, all regular +files, directories (recursively), and symlinks created in the +directory will be encrypted, inheriting the same encryption policy. +The filenames in the directory's entries will be encrypted as well. + +Alternatively, if the file is already encrypted, then +FS_IOC_SET_ENCRYPTION_POLICY validates that the specified encryption +policy exactly matches the actual one. If they match, then the ioctl +returns 0. Otherwise, it fails with EEXIST. This works on both +regular files and directories, including nonempty directories. + +When a v2 encryption policy is assigned to a directory, it is also +required that either the specified key has been added by the current +user or that the caller has CAP_FOWNER in the initial user namespace. +(This is needed to prevent a user from encrypting their data with +another user's key.) The key must remain added while +FS_IOC_SET_ENCRYPTION_POLICY is executing. However, if the new +encrypted directory does not need to be accessed immediately, then the +key can be removed right away afterwards. + +Note that the ext4 filesystem does not allow the root directory to be +encrypted, even if it is empty. Users who want to encrypt an entire +filesystem with one key should consider using dm-crypt instead. + +FS_IOC_SET_ENCRYPTION_POLICY can fail with the following errors: + +- ``EACCES``: the file is not owned by the process's uid, nor does the + process have the CAP_FOWNER capability in a namespace with the file + owner's uid mapped +- ``EEXIST``: the file is already encrypted with an encryption policy + different from the one specified +- ``EINVAL``: an invalid encryption policy was specified (invalid + version, mode(s), or flags; or reserved bits were set); or a v1 + encryption policy was specified but the directory has the casefold + flag enabled (casefolding is incompatible with v1 policies). +- ``ENOKEY``: a v2 encryption policy was specified, but the key with + the specified ``master_key_identifier`` has not been added, nor does + the process have the CAP_FOWNER capability in the initial user + namespace +- ``ENOTDIR``: the file is unencrypted and is a regular file, not a + directory +- ``ENOTEMPTY``: the file is unencrypted and is a nonempty directory +- ``ENOTTY``: this type of filesystem does not implement encryption +- ``EOPNOTSUPP``: the kernel was not configured with encryption + support for filesystems, or the filesystem superblock has not + had encryption enabled on it. (For example, to use encryption on an + ext4 filesystem, CONFIG_FS_ENCRYPTION must be enabled in the + kernel config, and the superblock must have had the "encrypt" + feature flag enabled using ``tune2fs -O encrypt`` or ``mkfs.ext4 -O + encrypt``.) +- ``EPERM``: this directory may not be encrypted, e.g. because it is + the root directory of an ext4 filesystem +- ``EROFS``: the filesystem is readonly + +Getting an encryption policy +---------------------------- + +Two ioctls are available to get a file's encryption policy: + +- `FS_IOC_GET_ENCRYPTION_POLICY_EX`_ +- `FS_IOC_GET_ENCRYPTION_POLICY`_ + +The extended (_EX) version of the ioctl is more general and is +recommended to use when possible. However, on older kernels only the +original ioctl is available. Applications should try the extended +version, and if it fails with ENOTTY fall back to the original +version. + +FS_IOC_GET_ENCRYPTION_POLICY_EX +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The FS_IOC_GET_ENCRYPTION_POLICY_EX ioctl retrieves the encryption +policy, if any, for a directory or regular file. No additional +permissions are required beyond the ability to open the file. It +takes in a pointer to struct fscrypt_get_policy_ex_arg, +defined as follows:: + + struct fscrypt_get_policy_ex_arg { + __u64 policy_size; /* input/output */ + union { + __u8 version; + struct fscrypt_policy_v1 v1; + struct fscrypt_policy_v2 v2; + } policy; /* output */ + }; + +The caller must initialize ``policy_size`` to the size available for +the policy struct, i.e. ``sizeof(arg.policy)``. + +On success, the policy struct is returned in ``policy``, and its +actual size is returned in ``policy_size``. ``policy.version`` should +be checked to determine the version of policy returned. Note that the +version code for the "v1" policy is actually 0 (FSCRYPT_POLICY_V1). + +FS_IOC_GET_ENCRYPTION_POLICY_EX can fail with the following errors: + +- ``EINVAL``: the file is encrypted, but it uses an unrecognized + encryption policy version +- ``ENODATA``: the file is not encrypted +- ``ENOTTY``: this type of filesystem does not implement encryption, + or this kernel is too old to support FS_IOC_GET_ENCRYPTION_POLICY_EX + (try FS_IOC_GET_ENCRYPTION_POLICY instead) +- ``EOPNOTSUPP``: the kernel was not configured with encryption + support for this filesystem, or the filesystem superblock has not + had encryption enabled on it +- ``EOVERFLOW``: the file is encrypted and uses a recognized + encryption policy version, but the policy struct does not fit into + the provided buffer + +Note: if you only need to know whether a file is encrypted or not, on +most filesystems it is also possible to use the FS_IOC_GETFLAGS ioctl +and check for FS_ENCRYPT_FL, or to use the statx() system call and +check for STATX_ATTR_ENCRYPTED in stx_attributes. + +FS_IOC_GET_ENCRYPTION_POLICY +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The FS_IOC_GET_ENCRYPTION_POLICY ioctl can also retrieve the +encryption policy, if any, for a directory or regular file. However, +unlike `FS_IOC_GET_ENCRYPTION_POLICY_EX`_, +FS_IOC_GET_ENCRYPTION_POLICY only supports the original policy +version. It takes in a pointer directly to struct fscrypt_policy_v1 +rather than struct fscrypt_get_policy_ex_arg. + +The error codes for FS_IOC_GET_ENCRYPTION_POLICY are the same as those +for FS_IOC_GET_ENCRYPTION_POLICY_EX, except that +FS_IOC_GET_ENCRYPTION_POLICY also returns ``EINVAL`` if the file is +encrypted using a newer encryption policy version. + +Getting the per-filesystem salt +------------------------------- + +Some filesystems, such as ext4 and F2FS, also support the deprecated +ioctl FS_IOC_GET_ENCRYPTION_PWSALT. This ioctl retrieves a randomly +generated 16-byte value stored in the filesystem superblock. This +value is intended to used as a salt when deriving an encryption key +from a passphrase or other low-entropy user credential. + +FS_IOC_GET_ENCRYPTION_PWSALT is deprecated. Instead, prefer to +generate and manage any needed salt(s) in userspace. + +Getting a file's encryption nonce +--------------------------------- + +Since Linux v5.7, the ioctl FS_IOC_GET_ENCRYPTION_NONCE is supported. +On encrypted files and directories it gets the inode's 16-byte nonce. +On unencrypted files and directories, it fails with ENODATA. + +This ioctl can be useful for automated tests which verify that the +encryption is being done correctly. It is not needed for normal use +of fscrypt. + +Adding keys +----------- + +FS_IOC_ADD_ENCRYPTION_KEY +~~~~~~~~~~~~~~~~~~~~~~~~~ + +The FS_IOC_ADD_ENCRYPTION_KEY ioctl adds a master encryption key to +the filesystem, making all files on the filesystem which were +encrypted using that key appear "unlocked", i.e. in plaintext form. +It can be executed on any file or directory on the target filesystem, +but using the filesystem's root directory is recommended. It takes in +a pointer to struct fscrypt_add_key_arg, defined as follows:: + + struct fscrypt_add_key_arg { + struct fscrypt_key_specifier key_spec; + __u32 raw_size; + __u32 key_id; + __u32 __reserved[8]; + __u8 raw[]; + }; + + #define FSCRYPT_KEY_SPEC_TYPE_DESCRIPTOR 1 + #define FSCRYPT_KEY_SPEC_TYPE_IDENTIFIER 2 + + struct fscrypt_key_specifier { + __u32 type; /* one of FSCRYPT_KEY_SPEC_TYPE_* */ + __u32 __reserved; + union { + __u8 __reserved[32]; /* reserve some extra space */ + __u8 descriptor[FSCRYPT_KEY_DESCRIPTOR_SIZE]; + __u8 identifier[FSCRYPT_KEY_IDENTIFIER_SIZE]; + } u; + }; + + struct fscrypt_provisioning_key_payload { + __u32 type; + __u32 __reserved; + __u8 raw[]; + }; + +struct fscrypt_add_key_arg must be zeroed, then initialized +as follows: + +- If the key is being added for use by v1 encryption policies, then + ``key_spec.type`` must contain FSCRYPT_KEY_SPEC_TYPE_DESCRIPTOR, and + ``key_spec.u.descriptor`` must contain the descriptor of the key + being added, corresponding to the value in the + ``master_key_descriptor`` field of struct fscrypt_policy_v1. + To add this type of key, the calling process must have the + CAP_SYS_ADMIN capability in the initial user namespace. + + Alternatively, if the key is being added for use by v2 encryption + policies, then ``key_spec.type`` must contain + FSCRYPT_KEY_SPEC_TYPE_IDENTIFIER, and ``key_spec.u.identifier`` is + an *output* field which the kernel fills in with a cryptographic + hash of the key. To add this type of key, the calling process does + not need any privileges. However, the number of keys that can be + added is limited by the user's quota for the keyrings service (see + ``Documentation/security/keys/core.rst``). + +- ``raw_size`` must be the size of the ``raw`` key provided, in bytes. + Alternatively, if ``key_id`` is nonzero, this field must be 0, since + in that case the size is implied by the specified Linux keyring key. + +- ``key_id`` is 0 if the raw key is given directly in the ``raw`` + field. Otherwise ``key_id`` is the ID of a Linux keyring key of + type "fscrypt-provisioning" whose payload is + struct fscrypt_provisioning_key_payload whose ``raw`` field contains + the raw key and whose ``type`` field matches ``key_spec.type``. + Since ``raw`` is variable-length, the total size of this key's + payload must be ``sizeof(struct fscrypt_provisioning_key_payload)`` + plus the raw key size. The process must have Search permission on + this key. + + Most users should leave this 0 and specify the raw key directly. + The support for specifying a Linux keyring key is intended mainly to + allow re-adding keys after a filesystem is unmounted and re-mounted, + without having to store the raw keys in userspace memory. + +- ``raw`` is a variable-length field which must contain the actual + key, ``raw_size`` bytes long. Alternatively, if ``key_id`` is + nonzero, then this field is unused. + +For v2 policy keys, the kernel keeps track of which user (identified +by effective user ID) added the key, and only allows the key to be +removed by that user --- or by "root", if they use +`FS_IOC_REMOVE_ENCRYPTION_KEY_ALL_USERS`_. + +However, if another user has added the key, it may be desirable to +prevent that other user from unexpectedly removing it. Therefore, +FS_IOC_ADD_ENCRYPTION_KEY may also be used to add a v2 policy key +*again*, even if it's already added by other user(s). In this case, +FS_IOC_ADD_ENCRYPTION_KEY will just install a claim to the key for the +current user, rather than actually add the key again (but the raw key +must still be provided, as a proof of knowledge). + +FS_IOC_ADD_ENCRYPTION_KEY returns 0 if either the key or a claim to +the key was either added or already exists. + +FS_IOC_ADD_ENCRYPTION_KEY can fail with the following errors: + +- ``EACCES``: FSCRYPT_KEY_SPEC_TYPE_DESCRIPTOR was specified, but the + caller does not have the CAP_SYS_ADMIN capability in the initial + user namespace; or the raw key was specified by Linux key ID but the + process lacks Search permission on the key. +- ``EDQUOT``: the key quota for this user would be exceeded by adding + the key +- ``EINVAL``: invalid key size or key specifier type, or reserved bits + were set +- ``EKEYREJECTED``: the raw key was specified by Linux key ID, but the + key has the wrong type +- ``ENOKEY``: the raw key was specified by Linux key ID, but no key + exists with that ID +- ``ENOTTY``: this type of filesystem does not implement encryption +- ``EOPNOTSUPP``: the kernel was not configured with encryption + support for this filesystem, or the filesystem superblock has not + had encryption enabled on it + +Legacy method +~~~~~~~~~~~~~ + +For v1 encryption policies, a master encryption key can also be +provided by adding it to a process-subscribed keyring, e.g. to a +session keyring, or to a user keyring if the user keyring is linked +into the session keyring. + +This method is deprecated (and not supported for v2 encryption +policies) for several reasons. First, it cannot be used in +combination with FS_IOC_REMOVE_ENCRYPTION_KEY (see `Removing keys`_), +so for removing a key a workaround such as keyctl_unlink() in +combination with ``sync; echo 2 > /proc/sys/vm/drop_caches`` would +have to be used. Second, it doesn't match the fact that the +locked/unlocked status of encrypted files (i.e. whether they appear to +be in plaintext form or in ciphertext form) is global. This mismatch +has caused much confusion as well as real problems when processes +running under different UIDs, such as a ``sudo`` command, need to +access encrypted files. + +Nevertheless, to add a key to one of the process-subscribed keyrings, +the add_key() system call can be used (see: +``Documentation/security/keys/core.rst``). The key type must be +"logon"; keys of this type are kept in kernel memory and cannot be +read back by userspace. The key description must be "fscrypt:" +followed by the 16-character lower case hex representation of the +``master_key_descriptor`` that was set in the encryption policy. The +key payload must conform to the following structure:: + + #define FSCRYPT_MAX_KEY_SIZE 64 + + struct fscrypt_key { + __u32 mode; + __u8 raw[FSCRYPT_MAX_KEY_SIZE]; + __u32 size; + }; + +``mode`` is ignored; just set it to 0. The actual key is provided in +``raw`` with ``size`` indicating its size in bytes. That is, the +bytes ``raw[0..size-1]`` (inclusive) are the actual key. + +The key description prefix "fscrypt:" may alternatively be replaced +with a filesystem-specific prefix such as "ext4:". However, the +filesystem-specific prefixes are deprecated and should not be used in +new programs. + +Removing keys +------------- + +Two ioctls are available for removing a key that was added by +`FS_IOC_ADD_ENCRYPTION_KEY`_: + +- `FS_IOC_REMOVE_ENCRYPTION_KEY`_ +- `FS_IOC_REMOVE_ENCRYPTION_KEY_ALL_USERS`_ + +These two ioctls differ only in cases where v2 policy keys are added +or removed by non-root users. + +These ioctls don't work on keys that were added via the legacy +process-subscribed keyrings mechanism. + +Before using these ioctls, read the `Kernel memory compromise`_ +section for a discussion of the security goals and limitations of +these ioctls. + +FS_IOC_REMOVE_ENCRYPTION_KEY +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The FS_IOC_REMOVE_ENCRYPTION_KEY ioctl removes a claim to a master +encryption key from the filesystem, and possibly removes the key +itself. It can be executed on any file or directory on the target +filesystem, but using the filesystem's root directory is recommended. +It takes in a pointer to struct fscrypt_remove_key_arg, defined +as follows:: + + struct fscrypt_remove_key_arg { + struct fscrypt_key_specifier key_spec; + #define FSCRYPT_KEY_REMOVAL_STATUS_FLAG_FILES_BUSY 0x00000001 + #define FSCRYPT_KEY_REMOVAL_STATUS_FLAG_OTHER_USERS 0x00000002 + __u32 removal_status_flags; /* output */ + __u32 __reserved[5]; + }; + +This structure must be zeroed, then initialized as follows: + +- The key to remove is specified by ``key_spec``: + + - To remove a key used by v1 encryption policies, set + ``key_spec.type`` to FSCRYPT_KEY_SPEC_TYPE_DESCRIPTOR and fill + in ``key_spec.u.descriptor``. To remove this type of key, the + calling process must have the CAP_SYS_ADMIN capability in the + initial user namespace. + + - To remove a key used by v2 encryption policies, set + ``key_spec.type`` to FSCRYPT_KEY_SPEC_TYPE_IDENTIFIER and fill + in ``key_spec.u.identifier``. + +For v2 policy keys, this ioctl is usable by non-root users. However, +to make this possible, it actually just removes the current user's +claim to the key, undoing a single call to FS_IOC_ADD_ENCRYPTION_KEY. +Only after all claims are removed is the key really removed. + +For example, if FS_IOC_ADD_ENCRYPTION_KEY was called with uid 1000, +then the key will be "claimed" by uid 1000, and +FS_IOC_REMOVE_ENCRYPTION_KEY will only succeed as uid 1000. Or, if +both uids 1000 and 2000 added the key, then for each uid +FS_IOC_REMOVE_ENCRYPTION_KEY will only remove their own claim. Only +once *both* are removed is the key really removed. (Think of it like +unlinking a file that may have hard links.) + +If FS_IOC_REMOVE_ENCRYPTION_KEY really removes the key, it will also +try to "lock" all files that had been unlocked with the key. It won't +lock files that are still in-use, so this ioctl is expected to be used +in cooperation with userspace ensuring that none of the files are +still open. However, if necessary, this ioctl can be executed again +later to retry locking any remaining files. + +FS_IOC_REMOVE_ENCRYPTION_KEY returns 0 if either the key was removed +(but may still have files remaining to be locked), the user's claim to +the key was removed, or the key was already removed but had files +remaining to be the locked so the ioctl retried locking them. In any +of these cases, ``removal_status_flags`` is filled in with the +following informational status flags: + +- ``FSCRYPT_KEY_REMOVAL_STATUS_FLAG_FILES_BUSY``: set if some file(s) + are still in-use. Not guaranteed to be set in the case where only + the user's claim to the key was removed. +- ``FSCRYPT_KEY_REMOVAL_STATUS_FLAG_OTHER_USERS``: set if only the + user's claim to the key was removed, not the key itself + +FS_IOC_REMOVE_ENCRYPTION_KEY can fail with the following errors: + +- ``EACCES``: The FSCRYPT_KEY_SPEC_TYPE_DESCRIPTOR key specifier type + was specified, but the caller does not have the CAP_SYS_ADMIN + capability in the initial user namespace +- ``EINVAL``: invalid key specifier type, or reserved bits were set +- ``ENOKEY``: the key object was not found at all, i.e. it was never + added in the first place or was already fully removed including all + files locked; or, the user does not have a claim to the key (but + someone else does). +- ``ENOTTY``: this type of filesystem does not implement encryption +- ``EOPNOTSUPP``: the kernel was not configured with encryption + support for this filesystem, or the filesystem superblock has not + had encryption enabled on it + +FS_IOC_REMOVE_ENCRYPTION_KEY_ALL_USERS +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +FS_IOC_REMOVE_ENCRYPTION_KEY_ALL_USERS is exactly the same as +`FS_IOC_REMOVE_ENCRYPTION_KEY`_, except that for v2 policy keys, the +ALL_USERS version of the ioctl will remove all users' claims to the +key, not just the current user's. I.e., the key itself will always be +removed, no matter how many users have added it. This difference is +only meaningful if non-root users are adding and removing keys. + +Because of this, FS_IOC_REMOVE_ENCRYPTION_KEY_ALL_USERS also requires +"root", namely the CAP_SYS_ADMIN capability in the initial user +namespace. Otherwise it will fail with EACCES. + +Getting key status +------------------ + +FS_IOC_GET_ENCRYPTION_KEY_STATUS +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The FS_IOC_GET_ENCRYPTION_KEY_STATUS ioctl retrieves the status of a +master encryption key. It can be executed on any file or directory on +the target filesystem, but using the filesystem's root directory is +recommended. It takes in a pointer to +struct fscrypt_get_key_status_arg, defined as follows:: + + struct fscrypt_get_key_status_arg { + /* input */ + struct fscrypt_key_specifier key_spec; + __u32 __reserved[6]; + + /* output */ + #define FSCRYPT_KEY_STATUS_ABSENT 1 + #define FSCRYPT_KEY_STATUS_PRESENT 2 + #define FSCRYPT_KEY_STATUS_INCOMPLETELY_REMOVED 3 + __u32 status; + #define FSCRYPT_KEY_STATUS_FLAG_ADDED_BY_SELF 0x00000001 + __u32 status_flags; + __u32 user_count; + __u32 __out_reserved[13]; + }; + +The caller must zero all input fields, then fill in ``key_spec``: + + - To get the status of a key for v1 encryption policies, set + ``key_spec.type`` to FSCRYPT_KEY_SPEC_TYPE_DESCRIPTOR and fill + in ``key_spec.u.descriptor``. + + - To get the status of a key for v2 encryption policies, set + ``key_spec.type`` to FSCRYPT_KEY_SPEC_TYPE_IDENTIFIER and fill + in ``key_spec.u.identifier``. + +On success, 0 is returned and the kernel fills in the output fields: + +- ``status`` indicates whether the key is absent, present, or + incompletely removed. Incompletely removed means that the master + secret has been removed, but some files are still in use; i.e., + `FS_IOC_REMOVE_ENCRYPTION_KEY`_ returned 0 but set the informational + status flag FSCRYPT_KEY_REMOVAL_STATUS_FLAG_FILES_BUSY. + +- ``status_flags`` can contain the following flags: + + - ``FSCRYPT_KEY_STATUS_FLAG_ADDED_BY_SELF`` indicates that the key + has added by the current user. This is only set for keys + identified by ``identifier`` rather than by ``descriptor``. + +- ``user_count`` specifies the number of users who have added the key. + This is only set for keys identified by ``identifier`` rather than + by ``descriptor``. + +FS_IOC_GET_ENCRYPTION_KEY_STATUS can fail with the following errors: + +- ``EINVAL``: invalid key specifier type, or reserved bits were set +- ``ENOTTY``: this type of filesystem does not implement encryption +- ``EOPNOTSUPP``: the kernel was not configured with encryption + support for this filesystem, or the filesystem superblock has not + had encryption enabled on it + +Among other use cases, FS_IOC_GET_ENCRYPTION_KEY_STATUS can be useful +for determining whether the key for a given encrypted directory needs +to be added before prompting the user for the passphrase needed to +derive the key. + +FS_IOC_GET_ENCRYPTION_KEY_STATUS can only get the status of keys in +the filesystem-level keyring, i.e. the keyring managed by +`FS_IOC_ADD_ENCRYPTION_KEY`_ and `FS_IOC_REMOVE_ENCRYPTION_KEY`_. It +cannot get the status of a key that has only been added for use by v1 +encryption policies using the legacy mechanism involving +process-subscribed keyrings. + +Access semantics +================ + +With the key +------------ + +With the encryption key, encrypted regular files, directories, and +symlinks behave very similarly to their unencrypted counterparts --- +after all, the encryption is intended to be transparent. However, +astute users may notice some differences in behavior: + +- Unencrypted files, or files encrypted with a different encryption + policy (i.e. different key, modes, or flags), cannot be renamed or + linked into an encrypted directory; see `Encryption policy + enforcement`_. Attempts to do so will fail with EXDEV. However, + encrypted files can be renamed within an encrypted directory, or + into an unencrypted directory. + + Note: "moving" an unencrypted file into an encrypted directory, e.g. + with the `mv` program, is implemented in userspace by a copy + followed by a delete. Be aware that the original unencrypted data + may remain recoverable from free space on the disk; prefer to keep + all files encrypted from the very beginning. The `shred` program + may be used to overwrite the source files but isn't guaranteed to be + effective on all filesystems and storage devices. + +- Direct I/O is not supported on encrypted files. Attempts to use + direct I/O on such files will fall back to buffered I/O. + +- The fallocate operations FALLOC_FL_COLLAPSE_RANGE and + FALLOC_FL_INSERT_RANGE are not supported on encrypted files and will + fail with EOPNOTSUPP. + +- Online defragmentation of encrypted files is not supported. The + EXT4_IOC_MOVE_EXT and F2FS_IOC_MOVE_RANGE ioctls will fail with + EOPNOTSUPP. + +- The ext4 filesystem does not support data journaling with encrypted + regular files. It will fall back to ordered data mode instead. + +- DAX (Direct Access) is not supported on encrypted files. + +- The st_size of an encrypted symlink will not necessarily give the + length of the symlink target as required by POSIX. It will actually + give the length of the ciphertext, which will be slightly longer + than the plaintext due to NUL-padding and an extra 2-byte overhead. + +- The maximum length of an encrypted symlink is 2 bytes shorter than + the maximum length of an unencrypted symlink. For example, on an + EXT4 filesystem with a 4K block size, unencrypted symlinks can be up + to 4095 bytes long, while encrypted symlinks can only be up to 4093 + bytes long (both lengths excluding the terminating null). + +Note that mmap *is* supported. This is possible because the pagecache +for an encrypted file contains the plaintext, not the ciphertext. + +Without the key +--------------- + +Some filesystem operations may be performed on encrypted regular +files, directories, and symlinks even before their encryption key has +been added, or after their encryption key has been removed: + +- File metadata may be read, e.g. using stat(). + +- Directories may be listed, in which case the filenames will be + listed in an encoded form derived from their ciphertext. The + current encoding algorithm is described in `Filename hashing and + encoding`_. The algorithm is subject to change, but it is + guaranteed that the presented filenames will be no longer than + NAME_MAX bytes, will not contain the ``/`` or ``\0`` characters, and + will uniquely identify directory entries. + + The ``.`` and ``..`` directory entries are special. They are always + present and are not encrypted or encoded. + +- Files may be deleted. That is, nondirectory files may be deleted + with unlink() as usual, and empty directories may be deleted with + rmdir() as usual. Therefore, ``rm`` and ``rm -r`` will work as + expected. + +- Symlink targets may be read and followed, but they will be presented + in encrypted form, similar to filenames in directories. Hence, they + are unlikely to point to anywhere useful. + +Without the key, regular files cannot be opened or truncated. +Attempts to do so will fail with ENOKEY. This implies that any +regular file operations that require a file descriptor, such as +read(), write(), mmap(), fallocate(), and ioctl(), are also forbidden. + +Also without the key, files of any type (including directories) cannot +be created or linked into an encrypted directory, nor can a name in an +encrypted directory be the source or target of a rename, nor can an +O_TMPFILE temporary file be created in an encrypted directory. All +such operations will fail with ENOKEY. + +It is not currently possible to backup and restore encrypted files +without the encryption key. This would require special APIs which +have not yet been implemented. + +Encryption policy enforcement +============================= + +After an encryption policy has been set on a directory, all regular +files, directories, and symbolic links created in that directory +(recursively) will inherit that encryption policy. Special files --- +that is, named pipes, device nodes, and UNIX domain sockets --- will +not be encrypted. + +Except for those special files, it is forbidden to have unencrypted +files, or files encrypted with a different encryption policy, in an +encrypted directory tree. Attempts to link or rename such a file into +an encrypted directory will fail with EXDEV. This is also enforced +during ->lookup() to provide limited protection against offline +attacks that try to disable or downgrade encryption in known locations +where applications may later write sensitive data. It is recommended +that systems implementing a form of "verified boot" take advantage of +this by validating all top-level encryption policies prior to access. + +Implementation details +====================== + +Encryption context +------------------ + +An encryption policy is represented on-disk by +struct fscrypt_context_v1 or struct fscrypt_context_v2. It is up to +individual filesystems to decide where to store it, but normally it +would be stored in a hidden extended attribute. It should *not* be +exposed by the xattr-related system calls such as getxattr() and +setxattr() because of the special semantics of the encryption xattr. +(In particular, there would be much confusion if an encryption policy +were to be added to or removed from anything other than an empty +directory.) These structs are defined as follows:: + + #define FSCRYPT_FILE_NONCE_SIZE 16 + + #define FSCRYPT_KEY_DESCRIPTOR_SIZE 8 + struct fscrypt_context_v1 { + u8 version; + u8 contents_encryption_mode; + u8 filenames_encryption_mode; + u8 flags; + u8 master_key_descriptor[FSCRYPT_KEY_DESCRIPTOR_SIZE]; + u8 nonce[FSCRYPT_FILE_NONCE_SIZE]; + }; + + #define FSCRYPT_KEY_IDENTIFIER_SIZE 16 + struct fscrypt_context_v2 { + u8 version; + u8 contents_encryption_mode; + u8 filenames_encryption_mode; + u8 flags; + u8 __reserved[4]; + u8 master_key_identifier[FSCRYPT_KEY_IDENTIFIER_SIZE]; + u8 nonce[FSCRYPT_FILE_NONCE_SIZE]; + }; + +The context structs contain the same information as the corresponding +policy structs (see `Setting an encryption policy`_), except that the +context structs also contain a nonce. The nonce is randomly generated +by the kernel and is used as KDF input or as a tweak to cause +different files to be encrypted differently; see `Per-file encryption +keys`_ and `DIRECT_KEY policies`_. + +Data path changes +----------------- + +For the read path (->readpage()) of regular files, filesystems can +read the ciphertext into the page cache and decrypt it in-place. The +page lock must be held until decryption has finished, to prevent the +page from becoming visible to userspace prematurely. + +For the write path (->writepage()) of regular files, filesystems +cannot encrypt data in-place in the page cache, since the cached +plaintext must be preserved. Instead, filesystems must encrypt into a +temporary buffer or "bounce page", then write out the temporary +buffer. Some filesystems, such as UBIFS, already use temporary +buffers regardless of encryption. Other filesystems, such as ext4 and +F2FS, have to allocate bounce pages specially for encryption. + +Fscrypt is also able to use inline encryption hardware instead of the +kernel crypto API for en/decryption of file contents. When possible, +and if directed to do so (by specifying the 'inlinecrypt' mount option +for an ext4/F2FS filesystem), it adds encryption contexts to bios and +uses blk-crypto to perform the en/decryption instead of making use of +the above read/write path changes. Of course, even if directed to +make use of inline encryption, fscrypt will only be able to do so if +either hardware inline encryption support is available for the +selected encryption algorithm or CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK +is selected. If neither is the case, fscrypt will fall back to using +the above mentioned read/write path changes for en/decryption. + +Filename hashing and encoding +----------------------------- + +Modern filesystems accelerate directory lookups by using indexed +directories. An indexed directory is organized as a tree keyed by +filename hashes. When a ->lookup() is requested, the filesystem +normally hashes the filename being looked up so that it can quickly +find the corresponding directory entry, if any. + +With encryption, lookups must be supported and efficient both with and +without the encryption key. Clearly, it would not work to hash the +plaintext filenames, since the plaintext filenames are unavailable +without the key. (Hashing the plaintext filenames would also make it +impossible for the filesystem's fsck tool to optimize encrypted +directories.) Instead, filesystems hash the ciphertext filenames, +i.e. the bytes actually stored on-disk in the directory entries. When +asked to do a ->lookup() with the key, the filesystem just encrypts +the user-supplied name to get the ciphertext. + +Lookups without the key are more complicated. The raw ciphertext may +contain the ``\0`` and ``/`` characters, which are illegal in +filenames. Therefore, readdir() must base64-encode the ciphertext for +presentation. For most filenames, this works fine; on ->lookup(), the +filesystem just base64-decodes the user-supplied name to get back to +the raw ciphertext. + +However, for very long filenames, base64 encoding would cause the +filename length to exceed NAME_MAX. To prevent this, readdir() +actually presents long filenames in an abbreviated form which encodes +a strong "hash" of the ciphertext filename, along with the optional +filesystem-specific hash(es) needed for directory lookups. This +allows the filesystem to still, with a high degree of confidence, map +the filename given in ->lookup() back to a particular directory entry +that was previously listed by readdir(). See +struct fscrypt_nokey_name in the source for more details. + +Note that the precise way that filenames are presented to userspace +without the key is subject to change in the future. It is only meant +as a way to temporarily present valid filenames so that commands like +``rm -r`` work as expected on encrypted directories. + +Tests +===== + +To test fscrypt, use xfstests, which is Linux's de facto standard +filesystem test suite. First, run all the tests in the "encrypt" +group on the relevant filesystem(s). One can also run the tests +with the 'inlinecrypt' mount option to test the implementation for +inline encryption support. For example, to test ext4 and +f2fs encryption using `kvm-xfstests +<https://github.com/tytso/xfstests-bld/blob/master/Documentation/kvm-quickstart.md>`_:: + + kvm-xfstests -c ext4,f2fs -g encrypt + kvm-xfstests -c ext4,f2fs -g encrypt -m inlinecrypt + +UBIFS encryption can also be tested this way, but it should be done in +a separate command, and it takes some time for kvm-xfstests to set up +emulated UBI volumes:: + + kvm-xfstests -c ubifs -g encrypt + +No tests should fail. However, tests that use non-default encryption +modes (e.g. generic/549 and generic/550) will be skipped if the needed +algorithms were not built into the kernel's crypto API. Also, tests +that access the raw block device (e.g. generic/399, generic/548, +generic/549, generic/550) will be skipped on UBIFS. + +Besides running the "encrypt" group tests, for ext4 and f2fs it's also +possible to run most xfstests with the "test_dummy_encryption" mount +option. This option causes all new files to be automatically +encrypted with a dummy key, without having to make any API calls. +This tests the encrypted I/O paths more thoroughly. To do this with +kvm-xfstests, use the "encrypt" filesystem configuration:: + + kvm-xfstests -c ext4/encrypt,f2fs/encrypt -g auto + kvm-xfstests -c ext4/encrypt,f2fs/encrypt -g auto -m inlinecrypt + +Because this runs many more tests than "-g encrypt" does, it takes +much longer to run; so also consider using `gce-xfstests +<https://github.com/tytso/xfstests-bld/blob/master/Documentation/gce-xfstests.md>`_ +instead of kvm-xfstests:: + + gce-xfstests -c ext4/encrypt,f2fs/encrypt -g auto + gce-xfstests -c ext4/encrypt,f2fs/encrypt -g auto -m inlinecrypt diff --git a/Documentation/filesystems/fsverity.rst b/Documentation/filesystems/fsverity.rst new file mode 100644 index 000000000..895e9711e --- /dev/null +++ b/Documentation/filesystems/fsverity.rst @@ -0,0 +1,734 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _fsverity: + +======================================================= +fs-verity: read-only file-based authenticity protection +======================================================= + +Introduction +============ + +fs-verity (``fs/verity/``) is a support layer that filesystems can +hook into to support transparent integrity and authenticity protection +of read-only files. Currently, it is supported by the ext4 and f2fs +filesystems. Like fscrypt, not too much filesystem-specific code is +needed to support fs-verity. + +fs-verity is similar to `dm-verity +<https://www.kernel.org/doc/Documentation/device-mapper/verity.txt>`_ +but works on files rather than block devices. On regular files on +filesystems supporting fs-verity, userspace can execute an ioctl that +causes the filesystem to build a Merkle tree for the file and persist +it to a filesystem-specific location associated with the file. + +After this, the file is made readonly, and all reads from the file are +automatically verified against the file's Merkle tree. Reads of any +corrupted data, including mmap reads, will fail. + +Userspace can use another ioctl to retrieve the root hash (actually +the "file measurement", which is a hash that includes the root hash) +that fs-verity is enforcing for the file. This ioctl executes in +constant time, regardless of the file size. + +fs-verity is essentially a way to hash a file in constant time, +subject to the caveat that reads which would violate the hash will +fail at runtime. + +Use cases +========= + +By itself, the base fs-verity feature only provides integrity +protection, i.e. detection of accidental (non-malicious) corruption. + +However, because fs-verity makes retrieving the file hash extremely +efficient, it's primarily meant to be used as a tool to support +authentication (detection of malicious modifications) or auditing +(logging file hashes before use). + +Trusted userspace code (e.g. operating system code running on a +read-only partition that is itself authenticated by dm-verity) can +authenticate the contents of an fs-verity file by using the +`FS_IOC_MEASURE_VERITY`_ ioctl to retrieve its hash, then verifying a +digital signature of it. + +A standard file hash could be used instead of fs-verity. However, +this is inefficient if the file is large and only a small portion may +be accessed. This is often the case for Android application package +(APK) files, for example. These typically contain many translations, +classes, and other resources that are infrequently or even never +accessed on a particular device. It would be slow and wasteful to +read and hash the entire file before starting the application. + +Unlike an ahead-of-time hash, fs-verity also re-verifies data each +time it's paged in. This ensures that malicious disk firmware can't +undetectably change the contents of the file at runtime. + +fs-verity does not replace or obsolete dm-verity. dm-verity should +still be used on read-only filesystems. fs-verity is for files that +must live on a read-write filesystem because they are independently +updated and potentially user-installed, so dm-verity cannot be used. + +The base fs-verity feature is a hashing mechanism only; actually +authenticating the files is up to userspace. However, to meet some +users' needs, fs-verity optionally supports a simple signature +verification mechanism where users can configure the kernel to require +that all fs-verity files be signed by a key loaded into a keyring; see +`Built-in signature verification`_. Support for fs-verity file hashes +in IMA (Integrity Measurement Architecture) policies is also planned. + +User API +======== + +FS_IOC_ENABLE_VERITY +-------------------- + +The FS_IOC_ENABLE_VERITY ioctl enables fs-verity on a file. It takes +in a pointer to a struct fsverity_enable_arg, defined as +follows:: + + struct fsverity_enable_arg { + __u32 version; + __u32 hash_algorithm; + __u32 block_size; + __u32 salt_size; + __u64 salt_ptr; + __u32 sig_size; + __u32 __reserved1; + __u64 sig_ptr; + __u64 __reserved2[11]; + }; + +This structure contains the parameters of the Merkle tree to build for +the file, and optionally contains a signature. It must be initialized +as follows: + +- ``version`` must be 1. +- ``hash_algorithm`` must be the identifier for the hash algorithm to + use for the Merkle tree, such as FS_VERITY_HASH_ALG_SHA256. See + ``include/uapi/linux/fsverity.h`` for the list of possible values. +- ``block_size`` must be the Merkle tree block size. Currently, this + must be equal to the system page size, which is usually 4096 bytes. + Other sizes may be supported in the future. This value is not + necessarily the same as the filesystem block size. +- ``salt_size`` is the size of the salt in bytes, or 0 if no salt is + provided. The salt is a value that is prepended to every hashed + block; it can be used to personalize the hashing for a particular + file or device. Currently the maximum salt size is 32 bytes. +- ``salt_ptr`` is the pointer to the salt, or NULL if no salt is + provided. +- ``sig_size`` is the size of the signature in bytes, or 0 if no + signature is provided. Currently the signature is (somewhat + arbitrarily) limited to 16128 bytes. See `Built-in signature + verification`_ for more information. +- ``sig_ptr`` is the pointer to the signature, or NULL if no + signature is provided. +- All reserved fields must be zeroed. + +FS_IOC_ENABLE_VERITY causes the filesystem to build a Merkle tree for +the file and persist it to a filesystem-specific location associated +with the file, then mark the file as a verity file. This ioctl may +take a long time to execute on large files, and it is interruptible by +fatal signals. + +FS_IOC_ENABLE_VERITY checks for write access to the inode. However, +it must be executed on an O_RDONLY file descriptor and no processes +can have the file open for writing. Attempts to open the file for +writing while this ioctl is executing will fail with ETXTBSY. (This +is necessary to guarantee that no writable file descriptors will exist +after verity is enabled, and to guarantee that the file's contents are +stable while the Merkle tree is being built over it.) + +On success, FS_IOC_ENABLE_VERITY returns 0, and the file becomes a +verity file. On failure (including the case of interruption by a +fatal signal), no changes are made to the file. + +FS_IOC_ENABLE_VERITY can fail with the following errors: + +- ``EACCES``: the process does not have write access to the file +- ``EBADMSG``: the signature is malformed +- ``EBUSY``: this ioctl is already running on the file +- ``EEXIST``: the file already has verity enabled +- ``EFAULT``: the caller provided inaccessible memory +- ``EINTR``: the operation was interrupted by a fatal signal +- ``EINVAL``: unsupported version, hash algorithm, or block size; or + reserved bits are set; or the file descriptor refers to neither a + regular file nor a directory. +- ``EISDIR``: the file descriptor refers to a directory +- ``EKEYREJECTED``: the signature doesn't match the file +- ``EMSGSIZE``: the salt or signature is too long +- ``ENOKEY``: the fs-verity keyring doesn't contain the certificate + needed to verify the signature +- ``ENOPKG``: fs-verity recognizes the hash algorithm, but it's not + available in the kernel's crypto API as currently configured (e.g. + for SHA-512, missing CONFIG_CRYPTO_SHA512). +- ``ENOTTY``: this type of filesystem does not implement fs-verity +- ``EOPNOTSUPP``: the kernel was not configured with fs-verity + support; or the filesystem superblock has not had the 'verity' + feature enabled on it; or the filesystem does not support fs-verity + on this file. (See `Filesystem support`_.) +- ``EPERM``: the file is append-only; or, a signature is required and + one was not provided. +- ``EROFS``: the filesystem is read-only +- ``ETXTBSY``: someone has the file open for writing. This can be the + caller's file descriptor, another open file descriptor, or the file + reference held by a writable memory map. + +FS_IOC_MEASURE_VERITY +--------------------- + +The FS_IOC_MEASURE_VERITY ioctl retrieves the measurement of a verity +file. The file measurement is a digest that cryptographically +identifies the file contents that are being enforced on reads. + +This ioctl takes in a pointer to a variable-length structure:: + + struct fsverity_digest { + __u16 digest_algorithm; + __u16 digest_size; /* input/output */ + __u8 digest[]; + }; + +``digest_size`` is an input/output field. On input, it must be +initialized to the number of bytes allocated for the variable-length +``digest`` field. + +On success, 0 is returned and the kernel fills in the structure as +follows: + +- ``digest_algorithm`` will be the hash algorithm used for the file + measurement. It will match ``fsverity_enable_arg::hash_algorithm``. +- ``digest_size`` will be the size of the digest in bytes, e.g. 32 + for SHA-256. (This can be redundant with ``digest_algorithm``.) +- ``digest`` will be the actual bytes of the digest. + +FS_IOC_MEASURE_VERITY is guaranteed to execute in constant time, +regardless of the size of the file. + +FS_IOC_MEASURE_VERITY can fail with the following errors: + +- ``EFAULT``: the caller provided inaccessible memory +- ``ENODATA``: the file is not a verity file +- ``ENOTTY``: this type of filesystem does not implement fs-verity +- ``EOPNOTSUPP``: the kernel was not configured with fs-verity + support, or the filesystem superblock has not had the 'verity' + feature enabled on it. (See `Filesystem support`_.) +- ``EOVERFLOW``: the digest is longer than the specified + ``digest_size`` bytes. Try providing a larger buffer. + +FS_IOC_GETFLAGS +--------------- + +The existing ioctl FS_IOC_GETFLAGS (which isn't specific to fs-verity) +can also be used to check whether a file has fs-verity enabled or not. +To do so, check for FS_VERITY_FL (0x00100000) in the returned flags. + +The verity flag is not settable via FS_IOC_SETFLAGS. You must use +FS_IOC_ENABLE_VERITY instead, since parameters must be provided. + +statx +----- + +Since Linux v5.5, the statx() system call sets STATX_ATTR_VERITY if +the file has fs-verity enabled. This can perform better than +FS_IOC_GETFLAGS and FS_IOC_MEASURE_VERITY because it doesn't require +opening the file, and opening verity files can be expensive. + +Accessing verity files +====================== + +Applications can transparently access a verity file just like a +non-verity one, with the following exceptions: + +- Verity files are readonly. They cannot be opened for writing or + truncate()d, even if the file mode bits allow it. Attempts to do + one of these things will fail with EPERM. However, changes to + metadata such as owner, mode, timestamps, and xattrs are still + allowed, since these are not measured by fs-verity. Verity files + can also still be renamed, deleted, and linked to. + +- Direct I/O is not supported on verity files. Attempts to use direct + I/O on such files will fall back to buffered I/O. + +- DAX (Direct Access) is not supported on verity files, because this + would circumvent the data verification. + +- Reads of data that doesn't match the verity Merkle tree will fail + with EIO (for read()) or SIGBUS (for mmap() reads). + +- If the sysctl "fs.verity.require_signatures" is set to 1 and the + file's verity measurement is not signed by a key in the fs-verity + keyring, then opening the file will fail. See `Built-in signature + verification`_. + +Direct access to the Merkle tree is not supported. Therefore, if a +verity file is copied, or is backed up and restored, then it will lose +its "verity"-ness. fs-verity is primarily meant for files like +executables that are managed by a package manager. + +File measurement computation +============================ + +This section describes how fs-verity hashes the file contents using a +Merkle tree to produce the "file measurement" which cryptographically +identifies the file contents. This algorithm is the same for all +filesystems that support fs-verity. + +Userspace only needs to be aware of this algorithm if it needs to +compute the file measurement itself, e.g. in order to sign the file. + +.. _fsverity_merkle_tree: + +Merkle tree +----------- + +The file contents is divided into blocks, where the block size is +configurable but is usually 4096 bytes. The end of the last block is +zero-padded if needed. Each block is then hashed, producing the first +level of hashes. Then, the hashes in this first level are grouped +into 'blocksize'-byte blocks (zero-padding the ends as needed) and +these blocks are hashed, producing the second level of hashes. This +proceeds up the tree until only a single block remains. The hash of +this block is the "Merkle tree root hash". + +If the file fits in one block and is nonempty, then the "Merkle tree +root hash" is simply the hash of the single data block. If the file +is empty, then the "Merkle tree root hash" is all zeroes. + +The "blocks" here are not necessarily the same as "filesystem blocks". + +If a salt was specified, then it's zero-padded to the closest multiple +of the input size of the hash algorithm's compression function, e.g. +64 bytes for SHA-256 or 128 bytes for SHA-512. The padded salt is +prepended to every data or Merkle tree block that is hashed. + +The purpose of the block padding is to cause every hash to be taken +over the same amount of data, which simplifies the implementation and +keeps open more possibilities for hardware acceleration. The purpose +of the salt padding is to make the salting "free" when the salted hash +state is precomputed, then imported for each hash. + +Example: in the recommended configuration of SHA-256 and 4K blocks, +128 hash values fit in each block. Thus, each level of the Merkle +tree is approximately 128 times smaller than the previous, and for +large files the Merkle tree's size converges to approximately 1/127 of +the original file size. However, for small files, the padding is +significant, making the space overhead proportionally more. + +.. _fsverity_descriptor: + +fs-verity descriptor +-------------------- + +By itself, the Merkle tree root hash is ambiguous. For example, it +can't a distinguish a large file from a small second file whose data +is exactly the top-level hash block of the first file. Ambiguities +also arise from the convention of padding to the next block boundary. + +To solve this problem, the verity file measurement is actually +computed as a hash of the following structure, which contains the +Merkle tree root hash as well as other fields such as the file size:: + + struct fsverity_descriptor { + __u8 version; /* must be 1 */ + __u8 hash_algorithm; /* Merkle tree hash algorithm */ + __u8 log_blocksize; /* log2 of size of data and tree blocks */ + __u8 salt_size; /* size of salt in bytes; 0 if none */ + __le32 sig_size; /* must be 0 */ + __le64 data_size; /* size of file the Merkle tree is built over */ + __u8 root_hash[64]; /* Merkle tree root hash */ + __u8 salt[32]; /* salt prepended to each hashed block */ + __u8 __reserved[144]; /* must be 0's */ + }; + +Note that the ``sig_size`` field must be set to 0 for the purpose of +computing the file measurement, even if a signature was provided (or +will be provided) to `FS_IOC_ENABLE_VERITY`_. + +Built-in signature verification +=============================== + +With CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y, fs-verity supports putting +a portion of an authentication policy (see `Use cases`_) in the +kernel. Specifically, it adds support for: + +1. At fs-verity module initialization time, a keyring ".fs-verity" is + created. The root user can add trusted X.509 certificates to this + keyring using the add_key() system call, then (when done) + optionally use keyctl_restrict_keyring() to prevent additional + certificates from being added. + +2. `FS_IOC_ENABLE_VERITY`_ accepts a pointer to a PKCS#7 formatted + detached signature in DER format of the file measurement. On + success, this signature is persisted alongside the Merkle tree. + Then, any time the file is opened, the kernel will verify the + file's actual measurement against this signature, using the + certificates in the ".fs-verity" keyring. + +3. A new sysctl "fs.verity.require_signatures" is made available. + When set to 1, the kernel requires that all verity files have a + correctly signed file measurement as described in (2). + +File measurements must be signed in the following format, which is +similar to the structure used by `FS_IOC_MEASURE_VERITY`_:: + + struct fsverity_signed_digest { + char magic[8]; /* must be "FSVerity" */ + __le16 digest_algorithm; + __le16 digest_size; + __u8 digest[]; + }; + +fs-verity's built-in signature verification support is meant as a +relatively simple mechanism that can be used to provide some level of +authenticity protection for verity files, as an alternative to doing +the signature verification in userspace or using IMA-appraisal. +However, with this mechanism, userspace programs still need to check +that the verity bit is set, and there is no protection against verity +files being swapped around. + +Filesystem support +================== + +fs-verity is currently supported by the ext4 and f2fs filesystems. +The CONFIG_FS_VERITY kconfig option must be enabled to use fs-verity +on either filesystem. + +``include/linux/fsverity.h`` declares the interface between the +``fs/verity/`` support layer and filesystems. Briefly, filesystems +must provide an ``fsverity_operations`` structure that provides +methods to read and write the verity metadata to a filesystem-specific +location, including the Merkle tree blocks and +``fsverity_descriptor``. Filesystems must also call functions in +``fs/verity/`` at certain times, such as when a file is opened or when +pages have been read into the pagecache. (See `Verifying data`_.) + +ext4 +---- + +ext4 supports fs-verity since Linux v5.4 and e2fsprogs v1.45.2. + +To create verity files on an ext4 filesystem, the filesystem must have +been formatted with ``-O verity`` or had ``tune2fs -O verity`` run on +it. "verity" is an RO_COMPAT filesystem feature, so once set, old +kernels will only be able to mount the filesystem readonly, and old +versions of e2fsck will be unable to check the filesystem. Moreover, +currently ext4 only supports mounting a filesystem with the "verity" +feature when its block size is equal to PAGE_SIZE (often 4096 bytes). + +ext4 sets the EXT4_VERITY_FL on-disk inode flag on verity files. It +can only be set by `FS_IOC_ENABLE_VERITY`_, and it cannot be cleared. + +ext4 also supports encryption, which can be used simultaneously with +fs-verity. In this case, the plaintext data is verified rather than +the ciphertext. This is necessary in order to make the file +measurement meaningful, since every file is encrypted differently. + +ext4 stores the verity metadata (Merkle tree and fsverity_descriptor) +past the end of the file, starting at the first 64K boundary beyond +i_size. This approach works because (a) verity files are readonly, +and (b) pages fully beyond i_size aren't visible to userspace but can +be read/written internally by ext4 with only some relatively small +changes to ext4. This approach avoids having to depend on the +EA_INODE feature and on rearchitecturing ext4's xattr support to +support paging multi-gigabyte xattrs into memory, and to support +encrypting xattrs. Note that the verity metadata *must* be encrypted +when the file is, since it contains hashes of the plaintext data. + +Currently, ext4 verity only supports the case where the Merkle tree +block size, filesystem block size, and page size are all the same. It +also only supports extent-based files. + +f2fs +---- + +f2fs supports fs-verity since Linux v5.4 and f2fs-tools v1.11.0. + +To create verity files on an f2fs filesystem, the filesystem must have +been formatted with ``-O verity``. + +f2fs sets the FADVISE_VERITY_BIT on-disk inode flag on verity files. +It can only be set by `FS_IOC_ENABLE_VERITY`_, and it cannot be +cleared. + +Like ext4, f2fs stores the verity metadata (Merkle tree and +fsverity_descriptor) past the end of the file, starting at the first +64K boundary beyond i_size. See explanation for ext4 above. +Moreover, f2fs supports at most 4096 bytes of xattr entries per inode +which wouldn't be enough for even a single Merkle tree block. + +Currently, f2fs verity only supports a Merkle tree block size of 4096. +Also, f2fs doesn't support enabling verity on files that currently +have atomic or volatile writes pending. + +Implementation details +====================== + +Verifying data +-------------- + +fs-verity ensures that all reads of a verity file's data are verified, +regardless of which syscall is used to do the read (e.g. mmap(), +read(), pread()) and regardless of whether it's the first read or a +later read (unless the later read can return cached data that was +already verified). Below, we describe how filesystems implement this. + +Pagecache +~~~~~~~~~ + +For filesystems using Linux's pagecache, the ``->readpage()`` and +``->readpages()`` methods must be modified to verify pages before they +are marked Uptodate. Merely hooking ``->read_iter()`` would be +insufficient, since ``->read_iter()`` is not used for memory maps. + +Therefore, fs/verity/ provides a function fsverity_verify_page() which +verifies a page that has been read into the pagecache of a verity +inode, but is still locked and not Uptodate, so it's not yet readable +by userspace. As needed to do the verification, +fsverity_verify_page() will call back into the filesystem to read +Merkle tree pages via fsverity_operations::read_merkle_tree_page(). + +fsverity_verify_page() returns false if verification failed; in this +case, the filesystem must not set the page Uptodate. Following this, +as per the usual Linux pagecache behavior, attempts by userspace to +read() from the part of the file containing the page will fail with +EIO, and accesses to the page within a memory map will raise SIGBUS. + +fsverity_verify_page() currently only supports the case where the +Merkle tree block size is equal to PAGE_SIZE (often 4096 bytes). + +In principle, fsverity_verify_page() verifies the entire path in the +Merkle tree from the data page to the root hash. However, for +efficiency the filesystem may cache the hash pages. Therefore, +fsverity_verify_page() only ascends the tree reading hash pages until +an already-verified hash page is seen, as indicated by the PageChecked +bit being set. It then verifies the path to that page. + +This optimization, which is also used by dm-verity, results in +excellent sequential read performance. This is because usually (e.g. +127 in 128 times for 4K blocks and SHA-256) the hash page from the +bottom level of the tree will already be cached and checked from +reading a previous data page. However, random reads perform worse. + +Block device based filesystems +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Block device based filesystems (e.g. ext4 and f2fs) in Linux also use +the pagecache, so the above subsection applies too. However, they +also usually read many pages from a file at once, grouped into a +structure called a "bio". To make it easier for these types of +filesystems to support fs-verity, fs/verity/ also provides a function +fsverity_verify_bio() which verifies all pages in a bio. + +ext4 and f2fs also support encryption. If a verity file is also +encrypted, the pages must be decrypted before being verified. To +support this, these filesystems allocate a "post-read context" for +each bio and store it in ``->bi_private``:: + + struct bio_post_read_ctx { + struct bio *bio; + struct work_struct work; + unsigned int cur_step; + unsigned int enabled_steps; + }; + +``enabled_steps`` is a bitmask that specifies whether decryption, +verity, or both is enabled. After the bio completes, for each needed +postprocessing step the filesystem enqueues the bio_post_read_ctx on a +workqueue, and then the workqueue work does the decryption or +verification. Finally, pages where no decryption or verity error +occurred are marked Uptodate, and the pages are unlocked. + +Files on ext4 and f2fs may contain holes. Normally, ``->readpages()`` +simply zeroes holes and sets the corresponding pages Uptodate; no bios +are issued. To prevent this case from bypassing fs-verity, these +filesystems use fsverity_verify_page() to verify hole pages. + +ext4 and f2fs disable direct I/O on verity files, since otherwise +direct I/O would bypass fs-verity. (They also do the same for +encrypted files.) + +Userspace utility +================= + +This document focuses on the kernel, but a userspace utility for +fs-verity can be found at: + + https://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/fsverity-utils.git + +See the README.md file in the fsverity-utils source tree for details, +including examples of setting up fs-verity protected files. + +Tests +===== + +To test fs-verity, use xfstests. For example, using `kvm-xfstests +<https://github.com/tytso/xfstests-bld/blob/master/Documentation/kvm-quickstart.md>`_:: + + kvm-xfstests -c ext4,f2fs -g verity + +FAQ +=== + +This section answers frequently asked questions about fs-verity that +weren't already directly answered in other parts of this document. + +:Q: Why isn't fs-verity part of IMA? +:A: fs-verity and IMA (Integrity Measurement Architecture) have + different focuses. fs-verity is a filesystem-level mechanism for + hashing individual files using a Merkle tree. In contrast, IMA + specifies a system-wide policy that specifies which files are + hashed and what to do with those hashes, such as log them, + authenticate them, or add them to a measurement list. + + IMA is planned to support the fs-verity hashing mechanism as an + alternative to doing full file hashes, for people who want the + performance and security benefits of the Merkle tree based hash. + But it doesn't make sense to force all uses of fs-verity to be + through IMA. As a standalone filesystem feature, fs-verity + already meets many users' needs, and it's testable like other + filesystem features e.g. with xfstests. + +:Q: Isn't fs-verity useless because the attacker can just modify the + hashes in the Merkle tree, which is stored on-disk? +:A: To verify the authenticity of an fs-verity file you must verify + the authenticity of the "file measurement", which is basically the + root hash of the Merkle tree. See `Use cases`_. + +:Q: Isn't fs-verity useless because the attacker can just replace a + verity file with a non-verity one? +:A: See `Use cases`_. In the initial use case, it's really trusted + userspace code that authenticates the files; fs-verity is just a + tool to do this job efficiently and securely. The trusted + userspace code will consider non-verity files to be inauthentic. + +:Q: Why does the Merkle tree need to be stored on-disk? Couldn't you + store just the root hash? +:A: If the Merkle tree wasn't stored on-disk, then you'd have to + compute the entire tree when the file is first accessed, even if + just one byte is being read. This is a fundamental consequence of + how Merkle tree hashing works. To verify a leaf node, you need to + verify the whole path to the root hash, including the root node + (the thing which the root hash is a hash of). But if the root + node isn't stored on-disk, you have to compute it by hashing its + children, and so on until you've actually hashed the entire file. + + That defeats most of the point of doing a Merkle tree-based hash, + since if you have to hash the whole file ahead of time anyway, + then you could simply do sha256(file) instead. That would be much + simpler, and a bit faster too. + + It's true that an in-memory Merkle tree could still provide the + advantage of verification on every read rather than just on the + first read. However, it would be inefficient because every time a + hash page gets evicted (you can't pin the entire Merkle tree into + memory, since it may be very large), in order to restore it you + again need to hash everything below it in the tree. This again + defeats most of the point of doing a Merkle tree-based hash, since + a single block read could trigger re-hashing gigabytes of data. + +:Q: But couldn't you store just the leaf nodes and compute the rest? +:A: See previous answer; this really just moves up one level, since + one could alternatively interpret the data blocks as being the + leaf nodes of the Merkle tree. It's true that the tree can be + computed much faster if the leaf level is stored rather than just + the data, but that's only because each level is less than 1% the + size of the level below (assuming the recommended settings of + SHA-256 and 4K blocks). For the exact same reason, by storing + "just the leaf nodes" you'd already be storing over 99% of the + tree, so you might as well simply store the whole tree. + +:Q: Can the Merkle tree be built ahead of time, e.g. distributed as + part of a package that is installed to many computers? +:A: This isn't currently supported. It was part of the original + design, but was removed to simplify the kernel UAPI and because it + wasn't a critical use case. Files are usually installed once and + used many times, and cryptographic hashing is somewhat fast on + most modern processors. + +:Q: Why doesn't fs-verity support writes? +:A: Write support would be very difficult and would require a + completely different design, so it's well outside the scope of + fs-verity. Write support would require: + + - A way to maintain consistency between the data and hashes, + including all levels of hashes, since corruption after a crash + (especially of potentially the entire file!) is unacceptable. + The main options for solving this are data journalling, + copy-on-write, and log-structured volume. But it's very hard to + retrofit existing filesystems with new consistency mechanisms. + Data journalling is available on ext4, but is very slow. + + - Rebuilding the Merkle tree after every write, which would be + extremely inefficient. Alternatively, a different authenticated + dictionary structure such as an "authenticated skiplist" could + be used. However, this would be far more complex. + + Compare it to dm-verity vs. dm-integrity. dm-verity is very + simple: the kernel just verifies read-only data against a + read-only Merkle tree. In contrast, dm-integrity supports writes + but is slow, is much more complex, and doesn't actually support + full-device authentication since it authenticates each sector + independently, i.e. there is no "root hash". It doesn't really + make sense for the same device-mapper target to support these two + very different cases; the same applies to fs-verity. + +:Q: Since verity files are immutable, why isn't the immutable bit set? +:A: The existing "immutable" bit (FS_IMMUTABLE_FL) already has a + specific set of semantics which not only make the file contents + read-only, but also prevent the file from being deleted, renamed, + linked to, or having its owner or mode changed. These extra + properties are unwanted for fs-verity, so reusing the immutable + bit isn't appropriate. + +:Q: Why does the API use ioctls instead of setxattr() and getxattr()? +:A: Abusing the xattr interface for basically arbitrary syscalls is + heavily frowned upon by most of the Linux filesystem developers. + An xattr should really just be an xattr on-disk, not an API to + e.g. magically trigger construction of a Merkle tree. + +:Q: Does fs-verity support remote filesystems? +:A: Only ext4 and f2fs support is implemented currently, but in + principle any filesystem that can store per-file verity metadata + can support fs-verity, regardless of whether it's local or remote. + Some filesystems may have fewer options of where to store the + verity metadata; one possibility is to store it past the end of + the file and "hide" it from userspace by manipulating i_size. The + data verification functions provided by ``fs/verity/`` also assume + that the filesystem uses the Linux pagecache, but both local and + remote filesystems normally do so. + +:Q: Why is anything filesystem-specific at all? Shouldn't fs-verity + be implemented entirely at the VFS level? +:A: There are many reasons why this is not possible or would be very + difficult, including the following: + + - To prevent bypassing verification, pages must not be marked + Uptodate until they've been verified. Currently, each + filesystem is responsible for marking pages Uptodate via + ``->readpages()``. Therefore, currently it's not possible for + the VFS to do the verification on its own. Changing this would + require significant changes to the VFS and all filesystems. + + - It would require defining a filesystem-independent way to store + the verity metadata. Extended attributes don't work for this + because (a) the Merkle tree may be gigabytes, but many + filesystems assume that all xattrs fit into a single 4K + filesystem block, and (b) ext4 and f2fs encryption doesn't + encrypt xattrs, yet the Merkle tree *must* be encrypted when the + file contents are, because it stores hashes of the plaintext + file contents. + + So the verity metadata would have to be stored in an actual + file. Using a separate file would be very ugly, since the + metadata is fundamentally part of the file to be protected, and + it could cause problems where users could delete the real file + but not the metadata file or vice versa. On the other hand, + having it be in the same file would break applications unless + filesystems' notion of i_size were divorced from the VFS's, + which would be complex and require changes to all filesystems. + + - It's desirable that FS_IOC_ENABLE_VERITY uses the filesystem's + transaction mechanism so that either the file ends up with + verity enabled, or no changes were made. Allowing intermediate + states to occur after a crash may cause problems. diff --git a/Documentation/filesystems/fuse-io.rst b/Documentation/filesystems/fuse-io.rst new file mode 100644 index 000000000..255a368fe --- /dev/null +++ b/Documentation/filesystems/fuse-io.rst @@ -0,0 +1,44 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============== +Fuse I/O Modes +============== + +Fuse supports the following I/O modes: + +- direct-io +- cached + + write-through + + writeback-cache + +The direct-io mode can be selected with the FOPEN_DIRECT_IO flag in the +FUSE_OPEN reply. + +In direct-io mode the page cache is completely bypassed for reads and writes. +No read-ahead takes place. Shared mmap is disabled. + +In cached mode reads may be satisfied from the page cache, and data may be +read-ahead by the kernel to fill the cache. The cache is always kept consistent +after any writes to the file. All mmap modes are supported. + +The cached mode has two sub modes controlling how writes are handled. The +write-through mode is the default and is supported on all kernels. The +writeback-cache mode may be selected by the FUSE_WRITEBACK_CACHE flag in the +FUSE_INIT reply. + +In write-through mode each write is immediately sent to userspace as one or more +WRITE requests, as well as updating any cached pages (and caching previously +uncached, but fully written pages). No READ requests are ever sent for writes, +so when an uncached page is partially written, the page is discarded. + +In writeback-cache mode (enabled by the FUSE_WRITEBACK_CACHE flag) writes go to +the cache only, which means that the write(2) syscall can often complete very +fast. Dirty pages are written back implicitly (background writeback or page +reclaim on memory pressure) or explicitly (invoked by close(2), fsync(2) and +when the last ref to the file is being released on munmap(2)). This mode +assumes that all changes to the filesystem go through the FUSE kernel module +(size and atime/ctime/mtime attributes are kept up-to-date by the kernel), so +it's generally not suitable for network filesystems. If a partial page is +written, then the page needs to be first read from userspace. This means, that +even for files opened for O_WRONLY it is possible that READ requests will be +generated by the kernel. diff --git a/Documentation/filesystems/fuse.rst b/Documentation/filesystems/fuse.rst new file mode 100644 index 000000000..8120c3c0c --- /dev/null +++ b/Documentation/filesystems/fuse.rst @@ -0,0 +1,407 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==== +FUSE +==== + +Definitions +=========== + +Userspace filesystem: + A filesystem in which data and metadata are provided by an ordinary + userspace process. The filesystem can be accessed normally through + the kernel interface. + +Filesystem daemon: + The process(es) providing the data and metadata of the filesystem. + +Non-privileged mount (or user mount): + A userspace filesystem mounted by a non-privileged (non-root) user. + The filesystem daemon is running with the privileges of the mounting + user. NOTE: this is not the same as mounts allowed with the "user" + option in /etc/fstab, which is not discussed here. + +Filesystem connection: + A connection between the filesystem daemon and the kernel. The + connection exists until either the daemon dies, or the filesystem is + umounted. Note that detaching (or lazy umounting) the filesystem + does *not* break the connection, in this case it will exist until + the last reference to the filesystem is released. + +Mount owner: + The user who does the mounting. + +User: + The user who is performing filesystem operations. + +What is FUSE? +============= + +FUSE is a userspace filesystem framework. It consists of a kernel +module (fuse.ko), a userspace library (libfuse.*) and a mount utility +(fusermount). + +One of the most important features of FUSE is allowing secure, +non-privileged mounts. This opens up new possibilities for the use of +filesystems. A good example is sshfs: a secure network filesystem +using the sftp protocol. + +The userspace library and utilities are available from the +`FUSE homepage: <https://github.com/libfuse/>`_ + +Filesystem type +=============== + +The filesystem type given to mount(2) can be one of the following: + + fuse + This is the usual way to mount a FUSE filesystem. The first + argument of the mount system call may contain an arbitrary string, + which is not interpreted by the kernel. + + fuseblk + The filesystem is block device based. The first argument of the + mount system call is interpreted as the name of the device. + +Mount options +============= + +fd=N + The file descriptor to use for communication between the userspace + filesystem and the kernel. The file descriptor must have been + obtained by opening the FUSE device ('/dev/fuse'). + +rootmode=M + The file mode of the filesystem's root in octal representation. + +user_id=N + The numeric user id of the mount owner. + +group_id=N + The numeric group id of the mount owner. + +default_permissions + By default FUSE doesn't check file access permissions, the + filesystem is free to implement its access policy or leave it to + the underlying file access mechanism (e.g. in case of network + filesystems). This option enables permission checking, restricting + access based on file mode. It is usually useful together with the + 'allow_other' mount option. + +allow_other + This option overrides the security measure restricting file access + to the user mounting the filesystem. This option is by default only + allowed to root, but this restriction can be removed with a + (userspace) configuration option. + +max_read=N + With this option the maximum size of read operations can be set. + The default is infinite. Note that the size of read requests is + limited anyway to 32 pages (which is 128kbyte on i386). + +blksize=N + Set the block size for the filesystem. The default is 512. This + option is only valid for 'fuseblk' type mounts. + +Control filesystem +================== + +There's a control filesystem for FUSE, which can be mounted by:: + + mount -t fusectl none /sys/fs/fuse/connections + +Mounting it under the '/sys/fs/fuse/connections' directory makes it +backwards compatible with earlier versions. + +Under the fuse control filesystem each connection has a directory +named by a unique number. + +For each connection the following files exist within this directory: + + waiting + The number of requests which are waiting to be transferred to + userspace or being processed by the filesystem daemon. If there is + no filesystem activity and 'waiting' is non-zero, then the + filesystem is hung or deadlocked. + + abort + Writing anything into this file will abort the filesystem + connection. This means that all waiting requests will be aborted an + error returned for all aborted and new requests. + +Only the owner of the mount may read or write these files. + +Interrupting filesystem operations +################################## + +If a process issuing a FUSE filesystem request is interrupted, the +following will happen: + + - If the request is not yet sent to userspace AND the signal is + fatal (SIGKILL or unhandled fatal signal), then the request is + dequeued and returns immediately. + + - If the request is not yet sent to userspace AND the signal is not + fatal, then an interrupted flag is set for the request. When + the request has been successfully transferred to userspace and + this flag is set, an INTERRUPT request is queued. + + - If the request is already sent to userspace, then an INTERRUPT + request is queued. + +INTERRUPT requests take precedence over other requests, so the +userspace filesystem will receive queued INTERRUPTs before any others. + +The userspace filesystem may ignore the INTERRUPT requests entirely, +or may honor them by sending a reply to the *original* request, with +the error set to EINTR. + +It is also possible that there's a race between processing the +original request and its INTERRUPT request. There are two possibilities: + + 1. The INTERRUPT request is processed before the original request is + processed + + 2. The INTERRUPT request is processed after the original request has + been answered + +If the filesystem cannot find the original request, it should wait for +some timeout and/or a number of new requests to arrive, after which it +should reply to the INTERRUPT request with an EAGAIN error. In case +1) the INTERRUPT request will be requeued. In case 2) the INTERRUPT +reply will be ignored. + +Aborting a filesystem connection +================================ + +It is possible to get into certain situations where the filesystem is +not responding. Reasons for this may be: + + a) Broken userspace filesystem implementation + + b) Network connection down + + c) Accidental deadlock + + d) Malicious deadlock + +(For more on c) and d) see later sections) + +In either of these cases it may be useful to abort the connection to +the filesystem. There are several ways to do this: + + - Kill the filesystem daemon. Works in case of a) and b) + + - Kill the filesystem daemon and all users of the filesystem. Works + in all cases except some malicious deadlocks + + - Use forced umount (umount -f). Works in all cases but only if + filesystem is still attached (it hasn't been lazy unmounted) + + - Abort filesystem through the FUSE control filesystem. Most + powerful method, always works. + +How do non-privileged mounts work? +================================== + +Since the mount() system call is a privileged operation, a helper +program (fusermount) is needed, which is installed setuid root. + +The implication of providing non-privileged mounts is that the mount +owner must not be able to use this capability to compromise the +system. Obvious requirements arising from this are: + + A) mount owner should not be able to get elevated privileges with the + help of the mounted filesystem + + B) mount owner should not get illegitimate access to information from + other users' and the super user's processes + + C) mount owner should not be able to induce undesired behavior in + other users' or the super user's processes + +How are requirements fulfilled? +=============================== + + A) The mount owner could gain elevated privileges by either: + + 1. creating a filesystem containing a device file, then opening this device + + 2. creating a filesystem containing a suid or sgid application, then executing this application + + The solution is not to allow opening device files and ignore + setuid and setgid bits when executing programs. To ensure this + fusermount always adds "nosuid" and "nodev" to the mount options + for non-privileged mounts. + + B) If another user is accessing files or directories in the + filesystem, the filesystem daemon serving requests can record the + exact sequence and timing of operations performed. This + information is otherwise inaccessible to the mount owner, so this + counts as an information leak. + + The solution to this problem will be presented in point 2) of C). + + C) There are several ways in which the mount owner can induce + undesired behavior in other users' processes, such as: + + 1) mounting a filesystem over a file or directory which the mount + owner could otherwise not be able to modify (or could only + make limited modifications). + + This is solved in fusermount, by checking the access + permissions on the mountpoint and only allowing the mount if + the mount owner can do unlimited modification (has write + access to the mountpoint, and mountpoint is not a "sticky" + directory) + + 2) Even if 1) is solved the mount owner can change the behavior + of other users' processes. + + i) It can slow down or indefinitely delay the execution of a + filesystem operation creating a DoS against the user or the + whole system. For example a suid application locking a + system file, and then accessing a file on the mount owner's + filesystem could be stopped, and thus causing the system + file to be locked forever. + + ii) It can present files or directories of unlimited length, or + directory structures of unlimited depth, possibly causing a + system process to eat up diskspace, memory or other + resources, again causing *DoS*. + + The solution to this as well as B) is not to allow processes + to access the filesystem, which could otherwise not be + monitored or manipulated by the mount owner. Since if the + mount owner can ptrace a process, it can do all of the above + without using a FUSE mount, the same criteria as used in + ptrace can be used to check if a process is allowed to access + the filesystem or not. + + Note that the *ptrace* check is not strictly necessary to + prevent B/2/i, it is enough to check if mount owner has enough + privilege to send signal to the process accessing the + filesystem, since *SIGSTOP* can be used to get a similar effect. + +I think these limitations are unacceptable? +=========================================== + +If a sysadmin trusts the users enough, or can ensure through other +measures, that system processes will never enter non-privileged +mounts, it can relax the last limitation with a 'user_allow_other' +config option. If this config option is set, the mounting user can +add the 'allow_other' mount option which disables the check for other +users' processes. + +Kernel - userspace interface +============================ + +The following diagram shows how a filesystem operation (in this +example unlink) is performed in FUSE. :: + + + | "rm /mnt/fuse/file" | FUSE filesystem daemon + | | + | | >sys_read() + | | >fuse_dev_read() + | | >request_wait() + | | [sleep on fc->waitq] + | | + | >sys_unlink() | + | >fuse_unlink() | + | [get request from | + | fc->unused_list] | + | >request_send() | + | [queue req on fc->pending] | + | [wake up fc->waitq] | [woken up] + | >request_wait_answer() | + | [sleep on req->waitq] | + | | <request_wait() + | | [remove req from fc->pending] + | | [copy req to read buffer] + | | [add req to fc->processing] + | | <fuse_dev_read() + | | <sys_read() + | | + | | [perform unlink] + | | + | | >sys_write() + | | >fuse_dev_write() + | | [look up req in fc->processing] + | | [remove from fc->processing] + | | [copy write buffer to req] + | [woken up] | [wake up req->waitq] + | | <fuse_dev_write() + | | <sys_write() + | <request_wait_answer() | + | <request_send() | + | [add request to | + | fc->unused_list] | + | <fuse_unlink() | + | <sys_unlink() | + +.. note:: Everything in the description above is greatly simplified + +There are a couple of ways in which to deadlock a FUSE filesystem. +Since we are talking about unprivileged userspace programs, +something must be done about these. + +**Scenario 1 - Simple deadlock**:: + + | "rm /mnt/fuse/file" | FUSE filesystem daemon + | | + | >sys_unlink("/mnt/fuse/file") | + | [acquire inode semaphore | + | for "file"] | + | >fuse_unlink() | + | [sleep on req->waitq] | + | | <sys_read() + | | >sys_unlink("/mnt/fuse/file") + | | [acquire inode semaphore + | | for "file"] + | | *DEADLOCK* + +The solution for this is to allow the filesystem to be aborted. + +**Scenario 2 - Tricky deadlock** + + +This one needs a carefully crafted filesystem. It's a variation on +the above, only the call back to the filesystem is not explicit, +but is caused by a pagefault. :: + + | Kamikaze filesystem thread 1 | Kamikaze filesystem thread 2 + | | + | [fd = open("/mnt/fuse/file")] | [request served normally] + | [mmap fd to 'addr'] | + | [close fd] | [FLUSH triggers 'magic' flag] + | [read a byte from addr] | + | >do_page_fault() | + | [find or create page] | + | [lock page] | + | >fuse_readpage() | + | [queue READ request] | + | [sleep on req->waitq] | + | | [read request to buffer] + | | [create reply header before addr] + | | >sys_write(addr - headerlength) + | | >fuse_dev_write() + | | [look up req in fc->processing] + | | [remove from fc->processing] + | | [copy write buffer to req] + | | >do_page_fault() + | | [find or create page] + | | [lock page] + | | * DEADLOCK * + +The solution is basically the same as above. + +An additional problem is that while the write buffer is being copied +to the request, the request must not be interrupted/aborted. This is +because the destination address of the copy may not be valid after the +request has returned. + +This is solved with doing the copy atomically, and allowing abort +while the page(s) belonging to the write buffer are faulted with +get_user_pages(). The 'req->locked' flag indicates when the copy is +taking place, and abort is delayed until this flag is unset. diff --git a/Documentation/filesystems/gfs2-glocks.rst b/Documentation/filesystems/gfs2-glocks.rst new file mode 100644 index 000000000..d14f230f0 --- /dev/null +++ b/Documentation/filesystems/gfs2-glocks.rst @@ -0,0 +1,253 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================ +Glock internal locking rules +============================ + +This documents the basic principles of the glock state machine +internals. Each glock (struct gfs2_glock in fs/gfs2/incore.h) +has two main (internal) locks: + + 1. A spinlock (gl_lockref.lock) which protects the internal state such + as gl_state, gl_target and the list of holders (gl_holders) + 2. A non-blocking bit lock, GLF_LOCK, which is used to prevent other + threads from making calls to the DLM, etc. at the same time. If a + thread takes this lock, it must then call run_queue (usually via the + workqueue) when it releases it in order to ensure any pending tasks + are completed. + +The gl_holders list contains all the queued lock requests (not +just the holders) associated with the glock. If there are any +held locks, then they will be contiguous entries at the head +of the list. Locks are granted in strictly the order that they +are queued, except for those marked LM_FLAG_PRIORITY which are +used only during recovery, and even then only for journal locks. + +There are three lock states that users of the glock layer can request, +namely shared (SH), deferred (DF) and exclusive (EX). Those translate +to the following DLM lock modes: + +========== ====== ===================================================== +Glock mode DLM lock mode +========== ====== ===================================================== + UN IV/NL Unlocked (no DLM lock associated with glock) or NL + SH PR (Protected read) + DF CW (Concurrent write) + EX EX (Exclusive) +========== ====== ===================================================== + +Thus DF is basically a shared mode which is incompatible with the "normal" +shared lock mode, SH. In GFS2 the DF mode is used exclusively for direct I/O +operations. The glocks are basically a lock plus some routines which deal +with cache management. The following rules apply for the cache: + +========== ========== ============== ========== ============== +Glock mode Cache data Cache Metadata Dirty Data Dirty Metadata +========== ========== ============== ========== ============== + UN No No No No + SH Yes Yes No No + DF No Yes No No + EX Yes Yes Yes Yes +========== ========== ============== ========== ============== + +These rules are implemented using the various glock operations which +are defined for each type of glock. Not all types of glocks use +all the modes. Only inode glocks use the DF mode for example. + +Table of glock operations and per type constants: + +============= ============================================================= +Field Purpose +============= ============================================================= +go_xmote_th Called before remote state change (e.g. to sync dirty data) +go_xmote_bh Called after remote state change (e.g. to refill cache) +go_inval Called if remote state change requires invalidating the cache +go_demote_ok Returns boolean value of whether its ok to demote a glock + (e.g. checks timeout, and that there is no cached data) +go_lock Called for the first local holder of a lock +go_unlock Called on the final local unlock of a lock +go_dump Called to print content of object for debugfs file, or on + error to dump glock to the log. +go_type The type of the glock, ``LM_TYPE_*`` +go_callback Called if the DLM sends a callback to drop this lock +go_flags GLOF_ASPACE is set, if the glock has an address space + associated with it +============= ============================================================= + +The minimum hold time for each lock is the time after a remote lock +grant for which we ignore remote demote requests. This is in order to +prevent a situation where locks are being bounced around the cluster +from node to node with none of the nodes making any progress. This +tends to show up most with shared mmaped files which are being written +to by multiple nodes. By delaying the demotion in response to a +remote callback, that gives the userspace program time to make +some progress before the pages are unmapped. + +There is a plan to try and remove the go_lock and go_unlock callbacks +if possible, in order to try and speed up the fast path though the locking. +Also, eventually we hope to make the glock "EX" mode locally shared +such that any local locking will be done with the i_mutex as required +rather than via the glock. + +Locking rules for glock operations: + +============= ====================== ============================= +Operation GLF_LOCK bit lock held gl_lockref.lock spinlock held +============= ====================== ============================= +go_xmote_th Yes No +go_xmote_bh Yes No +go_inval Yes No +go_demote_ok Sometimes Yes +go_lock Yes No +go_unlock Yes No +go_dump Sometimes Yes +go_callback Sometimes (N/A) Yes +============= ====================== ============================= + +.. Note:: + + Operations must not drop either the bit lock or the spinlock + if its held on entry. go_dump and do_demote_ok must never block. + Note that go_dump will only be called if the glock's state + indicates that it is caching uptodate data. + +Glock locking order within GFS2: + + 1. i_rwsem (if required) + 2. Rename glock (for rename only) + 3. Inode glock(s) + (Parents before children, inodes at "same level" with same parent in + lock number order) + 4. Rgrp glock(s) (for (de)allocation operations) + 5. Transaction glock (via gfs2_trans_begin) for non-read operations + 6. i_rw_mutex (if required) + 7. Page lock (always last, very important!) + +There are two glocks per inode. One deals with access to the inode +itself (locking order as above), and the other, known as the iopen +glock is used in conjunction with the i_nlink field in the inode to +determine the lifetime of the inode in question. Locking of inodes +is on a per-inode basis. Locking of rgrps is on a per rgrp basis. +In general we prefer to lock local locks prior to cluster locks. + +Glock Statistics +---------------- + +The stats are divided into two sets: those relating to the +super block and those relating to an individual glock. The +super block stats are done on a per cpu basis in order to +try and reduce the overhead of gathering them. They are also +further divided by glock type. All timings are in nanoseconds. + +In the case of both the super block and glock statistics, +the same information is gathered in each case. The super +block timing statistics are used to provide default values for +the glock timing statistics, so that newly created glocks +should have, as far as possible, a sensible starting point. +The per-glock counters are initialised to zero when the +glock is created. The per-glock statistics are lost when +the glock is ejected from memory. + +The statistics are divided into three pairs of mean and +variance, plus two counters. The mean/variance pairs are +smoothed exponential estimates and the algorithm used is +one which will be very familiar to those used to calculation +of round trip times in network code. See "TCP/IP Illustrated, +Volume 1", W. Richard Stevens, sect 21.3, "Round-Trip Time Measurement", +p. 299 and onwards. Also, Volume 2, Sect. 25.10, p. 838 and onwards. +Unlike the TCP/IP Illustrated case, the mean and variance are +not scaled, but are in units of integer nanoseconds. + +The three pairs of mean/variance measure the following +things: + + 1. DLM lock time (non-blocking requests) + 2. DLM lock time (blocking requests) + 3. Inter-request time (again to the DLM) + +A non-blocking request is one which will complete right +away, whatever the state of the DLM lock in question. That +currently means any requests when (a) the current state of +the lock is exclusive, i.e. a lock demotion (b) the requested +state is either null or unlocked (again, a demotion) or (c) the +"try lock" flag is set. A blocking request covers all the other +lock requests. + +There are two counters. The first is there primarily to show +how many lock requests have been made, and thus how much data +has gone into the mean/variance calculations. The other counter +is counting queuing of holders at the top layer of the glock +code. Hopefully that number will be a lot larger than the number +of dlm lock requests issued. + +So why gather these statistics? There are several reasons +we'd like to get a better idea of these timings: + +1. To be able to better set the glock "min hold time" +2. To spot performance issues more easily +3. To improve the algorithm for selecting resource groups for + allocation (to base it on lock wait time, rather than blindly + using a "try lock") + +Due to the smoothing action of the updates, a step change in +some input quantity being sampled will only fully be taken +into account after 8 samples (or 4 for the variance) and this +needs to be carefully considered when interpreting the +results. + +Knowing both the time it takes a lock request to complete and +the average time between lock requests for a glock means we +can compute the total percentage of the time for which the +node is able to use a glock vs. time that the rest of the +cluster has its share. That will be very useful when setting +the lock min hold time. + +Great care has been taken to ensure that we +measure exactly the quantities that we want, as accurately +as possible. There are always inaccuracies in any +measuring system, but I hope this is as accurate as we +can reasonably make it. + +Per sb stats can be found here:: + + /sys/kernel/debug/gfs2/<fsname>/sbstats + +Per glock stats can be found here:: + + /sys/kernel/debug/gfs2/<fsname>/glstats + +Assuming that debugfs is mounted on /sys/kernel/debug and also +that <fsname> is replaced with the name of the gfs2 filesystem +in question. + +The abbreviations used in the output as are follows: + +========= ================================================================ +srtt Smoothed round trip time for non blocking dlm requests +srttvar Variance estimate for srtt +srttb Smoothed round trip time for (potentially) blocking dlm requests +srttvarb Variance estimate for srttb +sirt Smoothed inter request time (for dlm requests) +sirtvar Variance estimate for sirt +dlm Number of dlm requests made (dcnt in glstats file) +queue Number of glock requests queued (qcnt in glstats file) +========= ================================================================ + +The sbstats file contains a set of these stats for each glock type (so 8 lines +for each type) and for each cpu (one column per cpu). The glstats file contains +a set of these stats for each glock in a similar format to the glocks file, but +using the format mean/variance for each of the timing stats. + +The gfs2_glock_lock_time tracepoint prints out the current values of the stats +for the glock in question, along with some addition information on each dlm +reply that is received: + +====== ======================================= +status The status of the dlm request +flags The dlm request flags +tdiff The time taken by this specific request +====== ======================================= + +(remaining fields as per above list) + + diff --git a/Documentation/filesystems/gfs2-uevents.rst b/Documentation/filesystems/gfs2-uevents.rst new file mode 100644 index 000000000..f162a2c76 --- /dev/null +++ b/Documentation/filesystems/gfs2-uevents.rst @@ -0,0 +1,112 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================ +uevents and GFS2 +================ + +During the lifetime of a GFS2 mount, a number of uevents are generated. +This document explains what the events are and what they are used +for (by gfs_controld in gfs2-utils). + +A list of GFS2 uevents +====================== + +1. ADD +------ + +The ADD event occurs at mount time. It will always be the first +uevent generated by the newly created filesystem. If the mount +is successful, an ONLINE uevent will follow. If it is not successful +then a REMOVE uevent will follow. + +The ADD uevent has two environment variables: SPECTATOR=[0|1] +and RDONLY=[0|1] that specify the spectator status (a read-only mount +with no journal assigned), and read-only (with journal assigned) status +of the filesystem respectively. + +2. ONLINE +--------- + +The ONLINE uevent is generated after a successful mount or remount. It +has the same environment variables as the ADD uevent. The ONLINE +uevent, along with the two environment variables for spectator and +RDONLY are a relatively recent addition (2.6.32-rc+) and will not +be generated by older kernels. + +3. CHANGE +--------- + +The CHANGE uevent is used in two places. One is when reporting the +successful mount of the filesystem by the first node (FIRSTMOUNT=Done). +This is used as a signal by gfs_controld that it is then ok for other +nodes in the cluster to mount the filesystem. + +The other CHANGE uevent is used to inform of the completion +of journal recovery for one of the filesystems journals. It has +two environment variables, JID= which specifies the journal id which +has just been recovered, and RECOVERY=[Done|Failed] to indicate the +success (or otherwise) of the operation. These uevents are generated +for every journal recovered, whether it is during the initial mount +process or as the result of gfs_controld requesting a specific journal +recovery via the /sys/fs/gfs2/<fsname>/lock_module/recovery file. + +Because the CHANGE uevent was used (in early versions of gfs_controld) +without checking the environment variables to discover the state, we +cannot add any more functions to it without running the risk of +someone using an older version of the user tools and breaking their +cluster. For this reason the ONLINE uevent was used when adding a new +uevent for a successful mount or remount. + +4. OFFLINE +---------- + +The OFFLINE uevent is only generated due to filesystem errors and is used +as part of the "withdraw" mechanism. Currently this doesn't give any +information about what the error is, which is something that needs to +be fixed. + +5. REMOVE +--------- + +The REMOVE uevent is generated at the end of an unsuccessful mount +or at the end of a umount of the filesystem. All REMOVE uevents will +have been preceded by at least an ADD uevent for the same filesystem, +and unlike the other uevents is generated automatically by the kernel's +kobject subsystem. + + +Information common to all GFS2 uevents (uevent environment variables) +===================================================================== + +1. LOCKTABLE= +-------------- + +The LOCKTABLE is a string, as supplied on the mount command +line (locktable=) or via fstab. It is used as a filesystem label +as well as providing the information for a lock_dlm mount to be +able to join the cluster. + +2. LOCKPROTO= +------------- + +The LOCKPROTO is a string, and its value depends on what is set +on the mount command line, or via fstab. It will be either +lock_nolock or lock_dlm. In the future other lock managers +may be supported. + +3. JOURNALID= +------------- + +If a journal is in use by the filesystem (journals are not +assigned for spectator mounts) then this will give the +numeric journal id in all GFS2 uevents. + +4. UUID= +-------- + +With recent versions of gfs2-utils, mkfs.gfs2 writes a UUID +into the filesystem superblock. If it exists, this will +be included in every uevent relating to the filesystem. + + + diff --git a/Documentation/filesystems/gfs2.rst b/Documentation/filesystems/gfs2.rst new file mode 100644 index 000000000..8d1ab589c --- /dev/null +++ b/Documentation/filesystems/gfs2.rst @@ -0,0 +1,53 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================== +Global File System +================== + +https://fedorahosted.org/cluster/wiki/HomePage + +GFS is a cluster file system. It allows a cluster of computers to +simultaneously use a block device that is shared between them (with FC, +iSCSI, NBD, etc). GFS reads and writes to the block device like a local +file system, but also uses a lock module to allow the computers coordinate +their I/O so file system consistency is maintained. One of the nifty +features of GFS is perfect consistency -- changes made to the file system +on one machine show up immediately on all other machines in the cluster. + +GFS uses interchangeable inter-node locking mechanisms, the currently +supported mechanisms are: + + lock_nolock + - allows gfs to be used as a local file system + + lock_dlm + - uses a distributed lock manager (dlm) for inter-node locking. + The dlm is found at linux/fs/dlm/ + +Lock_dlm depends on user space cluster management systems found +at the URL above. + +To use gfs as a local file system, no external clustering systems are +needed, simply:: + + $ mkfs -t gfs2 -p lock_nolock -j 1 /dev/block_device + $ mount -t gfs2 /dev/block_device /dir + +If you are using Fedora, you need to install the gfs2-utils package +and, for lock_dlm, you will also need to install the cman package +and write a cluster.conf as per the documentation. For F17 and above +cman has been replaced by the dlm package. + +GFS2 is not on-disk compatible with previous versions of GFS, but it +is pretty close. + +The following man pages can be found at the URL above: + + ============ ============================================= + fsck.gfs2 to repair a filesystem + gfs2_grow to expand a filesystem online + gfs2_jadd to add journals to a filesystem online + tunegfs2 to manipulate, examine and tune a filesystem + gfs2_convert to convert a gfs filesystem to gfs2 in-place + mkfs.gfs2 to make a filesystem + ============ ============================================= diff --git a/Documentation/filesystems/hfs.rst b/Documentation/filesystems/hfs.rst new file mode 100644 index 000000000..776015c80 --- /dev/null +++ b/Documentation/filesystems/hfs.rst @@ -0,0 +1,87 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================================== +Macintosh HFS Filesystem for Linux +================================== + + +.. Note:: This filesystem doesn't have a maintainer. + + +HFS stands for ``Hierarchical File System`` and is the filesystem used +by the Mac Plus and all later Macintosh models. Earlier Macintosh +models used MFS (``Macintosh File System``), which is not supported, +MacOS 8.1 and newer support a filesystem called HFS+ that's similar to +HFS but is extended in various areas. Use the hfsplus filesystem driver +to access such filesystems from Linux. + + +Mount options +============= + +When mounting an HFS filesystem, the following options are accepted: + + creator=cccc, type=cccc + Specifies the creator/type values as shown by the MacOS finder + used for creating new files. Default values: '????'. + + uid=n, gid=n + Specifies the user/group that owns all files on the filesystems. + Default: user/group id of the mounting process. + + dir_umask=n, file_umask=n, umask=n + Specifies the umask used for all files , all directories or all + files and directories. Defaults to the umask of the mounting process. + + session=n + Select the CDROM session to mount as HFS filesystem. Defaults to + leaving that decision to the CDROM driver. This option will fail + with anything but a CDROM as underlying devices. + + part=n + Select partition number n from the devices. Does only makes + sense for CDROMS because they can't be partitioned under Linux. + For disk devices the generic partition parsing code does this + for us. Defaults to not parsing the partition table at all. + + quiet + Ignore invalid mount options instead of complaining. + + +Writing to HFS Filesystems +========================== + +HFS is not a UNIX filesystem, thus it does not have the usual features you'd +expect: + + * You can't modify the set-uid, set-gid, sticky or executable bits or the uid + and gid of files. + * You can't create hard- or symlinks, device files, sockets or FIFOs. + +HFS does on the other have the concepts of multiple forks per file. These +non-standard forks are represented as hidden additional files in the normal +filesystems namespace which is kind of a cludge and makes the semantics for +the a little strange: + + * You can't create, delete or rename resource forks of files or the + Finder's metadata. + * They are however created (with default values), deleted and renamed + along with the corresponding data fork or directory. + * Copying files to a different filesystem will loose those attributes + that are essential for MacOS to work. + + +Creating HFS filesystems +======================== + +The hfsutils package from Robert Leslie contains a program called +hformat that can be used to create HFS filesystem. See +<https://www.mars.org/home/rob/proj/hfs/> for details. + + +Credits +======= + +The HFS drivers was written by Paul H. Hargrovea (hargrove@sccm.Stanford.EDU). +Roman Zippel (roman@ardistech.com) rewrote large parts of the code and brought +in btree routines derived from Brad Boyer's hfsplus driver. diff --git a/Documentation/filesystems/hfsplus.rst b/Documentation/filesystems/hfsplus.rst new file mode 100644 index 000000000..f02f4f5fc --- /dev/null +++ b/Documentation/filesystems/hfsplus.rst @@ -0,0 +1,61 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================================== +Macintosh HFSPlus Filesystem for Linux +====================================== + +HFSPlus is a filesystem first introduced in MacOS 8.1. +HFSPlus has several extensions to HFS, including 32-bit allocation +blocks, 255-character unicode filenames, and file sizes of 2^63 bytes. + + +Mount options +============= + +When mounting an HFSPlus filesystem, the following options are accepted: + + creator=cccc, type=cccc + Specifies the creator/type values as shown by the MacOS finder + used for creating new files. Default values: '????'. + + uid=n, gid=n + Specifies the user/group that owns all files on the filesystem + that have uninitialized permissions structures. + Default: user/group id of the mounting process. + + umask=n + Specifies the umask (in octal) used for files and directories + that have uninitialized permissions structures. + Default: umask of the mounting process. + + session=n + Select the CDROM session to mount as HFSPlus filesystem. Defaults to + leaving that decision to the CDROM driver. This option will fail + with anything but a CDROM as underlying devices. + + part=n + Select partition number n from the devices. This option only makes + sense for CDROMs because they can't be partitioned under Linux. + For disk devices the generic partition parsing code does this + for us. Defaults to not parsing the partition table at all. + + decompose + Decompose file name characters. + + nodecompose + Do not decompose file name characters. + + force + Used to force write access to volumes that are marked as journalled + or locked. Use at your own risk. + + nls=cccc + Encoding to use when presenting file names. + + +References +========== + +kernel source: <file:fs/hfsplus> + +Apple Technote 1150 https://developer.apple.com/legacy/library/technotes/tn/tn1150.html diff --git a/Documentation/filesystems/hpfs.rst b/Documentation/filesystems/hpfs.rst new file mode 100644 index 000000000..7e0dd2f43 --- /dev/null +++ b/Documentation/filesystems/hpfs.rst @@ -0,0 +1,353 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================== +Read/Write HPFS 2.09 +==================== + +1998-2004, Mikulas Patocka + +:email: mikulas@artax.karlin.mff.cuni.cz +:homepage: https://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi + +Credits +======= +Chris Smith, 1993, original read-only HPFS, some code and hpfs structures file + is taken from it + +Jacques Gelinas, MSDos mmap, Inspired by fs/nfs/mmap.c (Jon Tombs 15 Aug 1993) + +Werner Almesberger, 1992, 1993, MSDos option parser & CR/LF conversion + +Mount options + +uid=xxx,gid=xxx,umask=xxx (default uid=gid=0 umask=default_system_umask) + Set owner/group/mode for files that do not have it specified in extended + attributes. Mode is inverted umask - for example umask 027 gives owner + all permission, group read permission and anybody else no access. Note + that for files mode is anded with 0666. If you want files to have 'x' + rights, you must use extended attributes. +case=lower,asis (default asis) + File name lowercasing in readdir. +conv=binary,text,auto (default binary) + CR/LF -> LF conversion, if auto, decision is made according to extension + - there is a list of text extensions (I thing it's better to not convert + text file than to damage binary file). If you want to change that list, + change it in the source. Original readonly HPFS contained some strange + heuristic algorithm that I removed. I thing it's danger to let the + computer decide whether file is text or binary. For example, DJGPP + binaries contain small text message at the beginning and they could be + misidentified and damaged under some circumstances. +check=none,normal,strict (default normal) + Check level. Selecting none will cause only little speedup and big + danger. I tried to write it so that it won't crash if check=normal on + corrupted filesystems. check=strict means many superfluous checks - + used for debugging (for example it checks if file is allocated in + bitmaps when accessing it). +errors=continue,remount-ro,panic (default remount-ro) + Behaviour when filesystem errors found. +chkdsk=no,errors,always (default errors) + When to mark filesystem dirty so that OS/2 checks it. +eas=no,ro,rw (default rw) + What to do with extended attributes. 'no' - ignore them and use always + values specified in uid/gid/mode options. 'ro' - read extended + attributes but do not create them. 'rw' - create extended attributes + when you use chmod/chown/chgrp/mknod/ln -s on the filesystem. +timeshift=(-)nnn (default 0) + Shifts the time by nnn seconds. For example, if you see under linux + one hour more, than under os/2, use timeshift=-3600. + + +File names +========== + +As in OS/2, filenames are case insensitive. However, shell thinks that names +are case sensitive, so for example when you create a file FOO, you can use +'cat FOO', 'cat Foo', 'cat foo' or 'cat F*' but not 'cat f*'. Note, that you +also won't be able to compile linux kernel (and maybe other things) on HPFS +because kernel creates different files with names like bootsect.S and +bootsect.s. When searching for file thats name has characters >= 128, codepages +are used - see below. +OS/2 ignores dots and spaces at the end of file name, so this driver does as +well. If you create 'a. ...', the file 'a' will be created, but you can still +access it under names 'a.', 'a..', 'a . . . ' etc. + + +Extended attributes +=================== + +On HPFS partitions, OS/2 can associate to each file a special information called +extended attributes. Extended attributes are pairs of (key,value) where key is +an ascii string identifying that attribute and value is any string of bytes of +variable length. OS/2 stores window and icon positions and file types there. So +why not use it for unix-specific info like file owner or access rights? This +driver can do it. If you chown/chgrp/chmod on a hpfs partition, extended +attributes with keys "UID", "GID" or "MODE" and 2-byte values are created. Only +that extended attributes those value differs from defaults specified in mount +options are created. Once created, the extended attributes are never deleted, +they're just changed. It means that when your default uid=0 and you type +something like 'chown luser file; chown root file' the file will contain +extended attribute UID=0. And when you umount the fs and mount it again with +uid=luser_uid, the file will be still owned by root! If you chmod file to 444, +extended attribute "MODE" will not be set, this special case is done by setting +read-only flag. When you mknod a block or char device, besides "MODE", the +special 4-byte extended attribute "DEV" will be created containing the device +number. Currently this driver cannot resize extended attributes - it means +that if somebody (I don't know who?) has set "UID", "GID", "MODE" or "DEV" +attributes with different sizes, they won't be rewritten and changing these +values doesn't work. + + +Symlinks +======== + +You can do symlinks on HPFS partition, symlinks are achieved by setting extended +attribute named "SYMLINK" with symlink value. Like on ext2, you can chown and +chgrp symlinks but I don't know what is it good for. chmoding symlink results +in chmoding file where symlink points. These symlinks are just for Linux use and +incompatible with OS/2. OS/2 PmShell symlinks are not supported because they are +stored in very crazy way. They tried to do it so that link changes when file is +moved ... sometimes it works. But the link is partly stored in directory +extended attributes and partly in OS2SYS.INI. I don't want (and don't know how) +to analyze or change OS2SYS.INI. + + +Codepages +========= + +HPFS can contain several uppercasing tables for several codepages and each +file has a pointer to codepage its name is in. However OS/2 was created in +America where people don't care much about codepages and so multiple codepages +support is quite buggy. I have Czech OS/2 working in codepage 852 on my disk. +Once I booted English OS/2 working in cp 850 and I created a file on my 852 +partition. It marked file name codepage as 850 - good. But when I again booted +Czech OS/2, the file was completely inaccessible under any name. It seems that +OS/2 uppercases the search pattern with its system code page (852) and file +name it's comparing to with its code page (850). These could never match. Is it +really what IBM developers wanted? But problems continued. When I created in +Czech OS/2 another file in that directory, that file was inaccessible too. OS/2 +probably uses different uppercasing method when searching where to place a file +(note, that files in HPFS directory must be sorted) and when searching for +a file. Finally when I opened this directory in PmShell, PmShell crashed (the +funny thing was that, when rebooted, PmShell tried to reopen this directory +again :-). chkdsk happily ignores these errors and only low-level disk +modification saved me. Never mix different language versions of OS/2 on one +system although HPFS was designed to allow that. +OK, I could implement complex codepage support to this driver but I think it +would cause more problems than benefit with such buggy implementation in OS/2. +So this driver simply uses first codepage it finds for uppercasing and +lowercasing no matter what's file codepage index. Usually all file names are in +this codepage - if you don't try to do what I described above :-) + + +Known bugs +========== + +HPFS386 on OS/2 server is not supported. HPFS386 installed on normal OS/2 client +should work. If you have OS/2 server, use only read-only mode. I don't know how +to handle some HPFS386 structures like access control list or extended perm +list, I don't know how to delete them when file is deleted and how to not +overwrite them with extended attributes. Send me some info on these structures +and I'll make it. However, this driver should detect presence of HPFS386 +structures, remount read-only and not destroy them (I hope). + +When there's not enough space for extended attributes, they will be truncated +and no error is returned. + +OS/2 can't access files if the path is longer than about 256 chars but this +driver allows you to do it. chkdsk ignores such errors. + +Sometimes you won't be able to delete some files on a very full filesystem +(returning error ENOSPC). That's because file in non-leaf node in directory tree +(one directory, if it's large, has dirents in tree on HPFS) must be replaced +with another node when deleted. And that new file might have larger name than +the old one so the new name doesn't fit in directory node (dnode). And that +would result in directory tree splitting, that takes disk space. Workaround is +to delete other files that are leaf (probability that the file is non-leaf is +about 1/50) or to truncate file first to make some space. +You encounter this problem only if you have many directories so that +preallocated directory band is full i.e.:: + + number_of_directories / size_of_filesystem_in_mb > 4. + +You can't delete open directories. + +You can't rename over directories (what is it good for?). + +Renaming files so that only case changes doesn't work. This driver supports it +but vfs doesn't. Something like 'mv file FILE' won't work. + +All atimes and directory mtimes are not updated. That's because of performance +reasons. If you extremely wish to update them, let me know, I'll write it (but +it will be slow). + +When the system is out of memory and swap, it may slightly corrupt filesystem +(lost files, unbalanced directories). (I guess all filesystem may do it). + +When compiled, you get warning: function declaration isn't a prototype. Does +anybody know what does it mean? + + +What does "unbalanced tree" message mean? +========================================= + +Old versions of this driver created sometimes unbalanced dnode trees. OS/2 +chkdsk doesn't scream if the tree is unbalanced (and sometimes creates +unbalanced trees too :-) but both HPFS and HPFS386 contain bug that it rarely +crashes when the tree is not balanced. This driver handles unbalanced trees +correctly and writes warning if it finds them. If you see this message, this is +probably because of directories created with old version of this driver. +Workaround is to move all files from that directory to another and then back +again. Do it in Linux, not OS/2! If you see this message in directory that is +whole created by this driver, it is BUG - let me know about it. + + +Bugs in OS/2 +============ + +When you have two (or more) lost directories pointing each to other, chkdsk +locks up when repairing filesystem. + +Sometimes (I think it's random) when you create a file with one-char name under +OS/2, OS/2 marks it as 'long'. chkdsk then removes this flag saying "Minor fs +error corrected". + +File names like "a .b" are marked as 'long' by OS/2 but chkdsk "corrects" it and +marks them as short (and writes "minor fs error corrected"). This bug is not in +HPFS386. + +Codepage bugs described above +============================= + +If you don't install fixpacks, there are many, many more... + + +History +======= + +====== ========================================================================= +0.90 First public release +0.91 Fixed bug that caused shooting to memory when write_inode was called on + open inode (rarely happened) +0.92 Fixed a little memory leak in freeing directory inodes +0.93 Fixed bug that locked up the machine when there were too many filenames + with first 15 characters same + Fixed write_file to zero file when writing behind file end +0.94 Fixed a little memory leak when trying to delete busy file or directory +0.95 Fixed a bug that i_hpfs_parent_dir was not updated when moving files +1.90 First version for 2.1.1xx kernels +1.91 Fixed a bug that chk_sectors failed when sectors were at the end of disk + Fixed a race-condition when write_inode is called while deleting file + Fixed a bug that could possibly happen (with very low probability) when + using 0xff in filenames. + + Rewritten locking to avoid race-conditions + + Mount option 'eas' now works + + Fsync no longer returns error + + Files beginning with '.' are marked hidden + + Remount support added + + Alloc is not so slow when filesystem becomes full + + Atimes are no more updated because it slows down operation + + Code cleanup (removed all commented debug prints) +1.92 Corrected a bug when sync was called just before closing file +1.93 Modified, so that it works with kernels >= 2.1.131, I don't know if it + works with previous versions + + Fixed a possible problem with disks > 64G (but I don't have one, so I can't + test it) + + Fixed a file overflow at 2G + + Added new option 'timeshift' + + Changed behaviour on HPFS386: It is now possible to operate on HPFS386 in + read-only mode + + Fixed a bug that slowed down alloc and prevented allocating 100% space + (this bug was not destructive) +1.94 Added workaround for one bug in Linux + + Fixed one buffer leak + + Fixed some incompatibilities with large extended attributes (but it's still + not 100% ok, I have no info on it and OS/2 doesn't want to create them) + + Rewritten allocation + + Fixed a bug with i_blocks (du sometimes didn't display correct values) + + Directories have no longer archive attribute set (some programs don't like + it) + + Fixed a bug that it set badly one flag in large anode tree (it was not + destructive) +1.95 Fixed one buffer leak, that could happen on corrupted filesystem + + Fixed one bug in allocation in 1.94 +1.96 Added workaround for one bug in OS/2 (HPFS locked up, HPFS386 reported + error sometimes when opening directories in PMSHELL) + + Fixed a possible bitmap race + + Fixed possible problem on large disks + + You can now delete open files + + Fixed a nondestructive race in rename +1.97 Support for HPFS v3 (on large partitions) + + ZFixed a bug that it didn't allow creation of files > 128M + (it should be 2G) +1.97.1 Changed names of global symbols + + Fixed a bug when chmoding or chowning root directory +1.98 Fixed a deadlock when using old_readdir + Better directory handling; workaround for "unbalanced tree" bug in OS/2 +1.99 Corrected a possible problem when there's not enough space while deleting + file + + Now it tries to truncate the file if there's not enough space when + deleting + + Removed a lot of redundant code +2.00 Fixed a bug in rename (it was there since 1.96) + Better anti-fragmentation strategy +2.01 Fixed problem with directory listing over NFS + + Directory lseek now checks for proper parameters + + Fixed race-condition in buffer code - it is in all filesystems in Linux; + when reading device (cat /dev/hda) while creating files on it, files + could be damaged +2.02 Workaround for bug in breada in Linux. breada could cause accesses beyond + end of partition +2.03 Char, block devices and pipes are correctly created + + Fixed non-crashing race in unlink (Alexander Viro) + + Now it works with Japanese version of OS/2 +2.04 Fixed error when ftruncate used to extend file +2.05 Fixed crash when got mount parameters without = + + Fixed crash when allocation of anode failed due to full disk + + Fixed some crashes when block io or inode allocation failed +2.06 Fixed some crash on corrupted disk structures + + Better allocation strategy + + Reschedule points added so that it doesn't lock CPU long time + + It should work in read-only mode on Warp Server +2.07 More fixes for Warp Server. Now it really works +2.08 Creating new files is not so slow on large disks + + An attempt to sync deleted file does not generate filesystem error +2.09 Fixed error on extremely fragmented files +====== ========================================================================= diff --git a/Documentation/filesystems/index.rst b/Documentation/filesystems/index.rst new file mode 100644 index 000000000..98f59a864 --- /dev/null +++ b/Documentation/filesystems/index.rst @@ -0,0 +1,122 @@ +.. _filesystems_index: + +=============================== +Filesystems in the Linux kernel +=============================== + +This under-development manual will, some glorious day, provide +comprehensive information on how the Linux virtual filesystem (VFS) layer +works, along with the filesystems that sit below it. For now, what we have +can be found below. + +Core VFS documentation +====================== + +See these manuals for documentation about the VFS layer itself and how its +algorithms work. + +.. toctree:: + :maxdepth: 2 + + vfs + path-lookup + api-summary + splice + locking + directory-locking + devpts + dnotify + fiemap + files + locks + mandatory-locking + mount_api + quota + seq_file + sharedsubtree + + automount-support + + caching/index + + porting + +Filesystem support layers +========================= + +Documentation for the support code within the filesystem layer for use in +filesystem implementations. + +.. toctree:: + :maxdepth: 2 + + journalling + fscrypt + fsverity + +Filesystems +=========== + +Documentation for filesystem implementations. + +.. toctree:: + :maxdepth: 2 + + 9p + adfs + affs + afs + autofs + autofs-mount-control + befs + bfs + btrfs + cifs/cifsroot + ceph + coda + configfs + cramfs + debugfs + dlmfs + ecryptfs + efivarfs + erofs + ext2 + ext3 + f2fs + gfs2 + gfs2-uevents + gfs2-glocks + hfs + hfsplus + hpfs + fuse + fuse-io + inotify + isofs + nilfs2 + nfs/index + ntfs + ocfs2 + ocfs2-online-filecheck + omfs + orangefs + overlayfs + proc + qnx6 + ramfs-rootfs-initramfs + relay + romfs + spufs/index + squashfs + sysfs + sysv-fs + tmpfs + ubifs + ubifs-authentication.rst + udf + virtiofs + vfat + xfs-delayed-logging-design + xfs-self-describing-metadata + zonefs diff --git a/Documentation/filesystems/inotify.rst b/Documentation/filesystems/inotify.rst new file mode 100644 index 000000000..7f7ef8af0 --- /dev/null +++ b/Documentation/filesystems/inotify.rst @@ -0,0 +1,90 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============================================================== +Inotify - A Powerful yet Simple File Change Notification System +=============================================================== + + + +Document started 15 Mar 2005 by Robert Love <rml@novell.com> + +Document updated 4 Jan 2015 by Zhang Zhen <zhenzhang.zhang@huawei.com> + + - Deleted obsoleted interface, just refer to manpages for user interface. + +(i) Rationale + +Q: + What is the design decision behind not tying the watch to the open fd of + the watched object? + +A: + Watches are associated with an open inotify device, not an open file. + This solves the primary problem with dnotify: keeping the file open pins + the file and thus, worse, pins the mount. Dnotify is therefore infeasible + for use on a desktop system with removable media as the media cannot be + unmounted. Watching a file should not require that it be open. + +Q: + What is the design decision behind using an-fd-per-instance as opposed to + an fd-per-watch? + +A: + An fd-per-watch quickly consumes more file descriptors than are allowed, + more fd's than are feasible to manage, and more fd's than are optimally + select()-able. Yes, root can bump the per-process fd limit and yes, users + can use epoll, but requiring both is a silly and extraneous requirement. + A watch consumes less memory than an open file, separating the number + spaces is thus sensible. The current design is what user-space developers + want: Users initialize inotify, once, and add n watches, requiring but one + fd and no twiddling with fd limits. Initializing an inotify instance two + thousand times is silly. If we can implement user-space's preferences + cleanly--and we can, the idr layer makes stuff like this trivial--then we + should. + + There are other good arguments. With a single fd, there is a single + item to block on, which is mapped to a single queue of events. The single + fd returns all watch events and also any potential out-of-band data. If + every fd was a separate watch, + + - There would be no way to get event ordering. Events on file foo and + file bar would pop poll() on both fd's, but there would be no way to tell + which happened first. A single queue trivially gives you ordering. Such + ordering is crucial to existing applications such as Beagle. Imagine + "mv a b ; mv b a" events without ordering. + + - We'd have to maintain n fd's and n internal queues with state, + versus just one. It is a lot messier in the kernel. A single, linear + queue is the data structure that makes sense. + + - User-space developers prefer the current API. The Beagle guys, for + example, love it. Trust me, I asked. It is not a surprise: Who'd want + to manage and block on 1000 fd's via select? + + - No way to get out of band data. + + - 1024 is still too low. ;-) + + When you talk about designing a file change notification system that + scales to 1000s of directories, juggling 1000s of fd's just does not seem + the right interface. It is too heavy. + + Additionally, it _is_ possible to more than one instance and + juggle more than one queue and thus more than one associated fd. There + need not be a one-fd-per-process mapping; it is one-fd-per-queue and a + process can easily want more than one queue. + +Q: + Why the system call approach? + +A: + The poor user-space interface is the second biggest problem with dnotify. + Signals are a terrible, terrible interface for file notification. Or for + anything, for that matter. The ideal solution, from all perspectives, is a + file descriptor-based one that allows basic file I/O and poll/select. + Obtaining the fd and managing the watches could have been done either via a + device file or a family of new system calls. We decided to implement a + family of system calls because that is the preferred approach for new kernel + interfaces. The only real difference was whether we wanted to use open(2) + and ioctl(2) or a couple of new system calls. System calls beat ioctls. + diff --git a/Documentation/filesystems/isofs.rst b/Documentation/filesystems/isofs.rst new file mode 100644 index 000000000..08fd46909 --- /dev/null +++ b/Documentation/filesystems/isofs.rst @@ -0,0 +1,64 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================== +ISO9660 Filesystem +================== + +Mount options that are the same as for msdos and vfat partitions. + + ========= ======================================================== + gid=nnn All files in the partition will be in group nnn. + uid=nnn All files in the partition will be owned by user id nnn. + umask=nnn The permission mask (see umask(1)) for the partition. + ========= ======================================================== + +Mount options that are the same as vfat partitions. These are only useful +when using discs encoded using Microsoft's Joliet extensions. + + ============== ============================================================= + iocharset=name Character set to use for converting from Unicode to + ASCII. Joliet filenames are stored in Unicode format, but + Unix for the most part doesn't know how to deal with Unicode. + There is also an option of doing UTF-8 translations with the + utf8 option. + utf8 Encode Unicode names in UTF-8 format. Default is no. + ============== ============================================================= + +Mount options unique to the isofs filesystem. + + ================= ============================================================ + block=512 Set the block size for the disk to 512 bytes + block=1024 Set the block size for the disk to 1024 bytes + block=2048 Set the block size for the disk to 2048 bytes + check=relaxed Matches filenames with different cases + check=strict Matches only filenames with the exact same case + cruft Try to handle badly formatted CDs. + map=off Do not map non-Rock Ridge filenames to lower case + map=normal Map non-Rock Ridge filenames to lower case + map=acorn As map=normal but also apply Acorn extensions if present + mode=xxx Sets the permissions on files to xxx unless Rock Ridge + extensions set the permissions otherwise + dmode=xxx Sets the permissions on directories to xxx unless Rock Ridge + extensions set the permissions otherwise + overriderockperm Set permissions on files and directories according to + 'mode' and 'dmode' even though Rock Ridge extensions are + present. + nojoliet Ignore Joliet extensions if they are present. + norock Ignore Rock Ridge extensions if they are present. + hide Completely strip hidden files from the file system. + showassoc Show files marked with the 'associated' bit + unhide Deprecated; showing hidden files is now default; + If given, it is a synonym for 'showassoc' which will + recreate previous unhide behavior + session=x Select number of session on multisession CD + sbsector=xxx Session begins from sector xxx + ================= ============================================================ + +Recommended documents about ISO 9660 standard are located at: + +- http://www.y-adagio.com/ +- ftp://ftp.ecma.ch/ecma-st/Ecma-119.pdf + +Quoting from the PDF "This 2nd Edition of Standard ECMA-119 is technically +identical with ISO 9660.", so it is a valid and gratis substitute of the +official ISO specification. diff --git a/Documentation/filesystems/journalling.rst b/Documentation/filesystems/journalling.rst new file mode 100644 index 000000000..e18f90ffc --- /dev/null +++ b/Documentation/filesystems/journalling.rst @@ -0,0 +1,215 @@ +The Linux Journalling API +========================= + +Overview +-------- + +Details +~~~~~~~ + +The journalling layer is easy to use. You need to first of all create a +journal_t data structure. There are two calls to do this dependent on +how you decide to allocate the physical media on which the journal +resides. The jbd2_journal_init_inode() call is for journals stored in +filesystem inodes, or the jbd2_journal_init_dev() call can be used +for journal stored on a raw device (in a continuous range of blocks). A +journal_t is a typedef for a struct pointer, so when you are finally +finished make sure you call jbd2_journal_destroy() on it to free up +any used kernel memory. + +Once you have got your journal_t object you need to 'mount' or load the +journal file. The journalling layer expects the space for the journal +was already allocated and initialized properly by the userspace tools. +When loading the journal you must call jbd2_journal_load() to process +journal contents. If the client file system detects the journal contents +does not need to be processed (or even need not have valid contents), it +may call jbd2_journal_wipe() to clear the journal contents before +calling jbd2_journal_load(). + +Note that jbd2_journal_wipe(..,0) calls +jbd2_journal_skip_recovery() for you if it detects any outstanding +transactions in the journal and similarly jbd2_journal_load() will +call jbd2_journal_recover() if necessary. I would advise reading +ext4_load_journal() in fs/ext4/super.c for examples on this stage. + +Now you can go ahead and start modifying the underlying filesystem. +Almost. + +You still need to actually journal your filesystem changes, this is done +by wrapping them into transactions. Additionally you also need to wrap +the modification of each of the buffers with calls to the journal layer, +so it knows what the modifications you are actually making are. To do +this use jbd2_journal_start() which returns a transaction handle. + +jbd2_journal_start() and its counterpart jbd2_journal_stop(), +which indicates the end of a transaction are nestable calls, so you can +reenter a transaction if necessary, but remember you must call +jbd2_journal_stop() the same number of times as +jbd2_journal_start() before the transaction is completed (or more +accurately leaves the update phase). Ext4/VFS makes use of this feature to +simplify handling of inode dirtying, quota support, etc. + +Inside each transaction you need to wrap the modifications to the +individual buffers (blocks). Before you start to modify a buffer you +need to call jbd2_journal_get_create_access() / +jbd2_journal_get_write_access() / +jbd2_journal_get_undo_access() as appropriate, this allows the +journalling layer to copy the unmodified +data if it needs to. After all the buffer may be part of a previously +uncommitted transaction. At this point you are at last ready to modify a +buffer, and once you are have done so you need to call +jbd2_journal_dirty_metadata(). Or if you've asked for access to a +buffer you now know is now longer required to be pushed back on the +device you can call jbd2_journal_forget() in much the same way as you +might have used bforget() in the past. + +A jbd2_journal_flush() may be called at any time to commit and +checkpoint all your transactions. + +Then at umount time , in your put_super() you can then call +jbd2_journal_destroy() to clean up your in-core journal object. + +Unfortunately there a couple of ways the journal layer can cause a +deadlock. The first thing to note is that each task can only have a +single outstanding transaction at any one time, remember nothing commits +until the outermost jbd2_journal_stop(). This means you must complete +the transaction at the end of each file/inode/address etc. operation you +perform, so that the journalling system isn't re-entered on another +journal. Since transactions can't be nested/batched across differing +journals, and another filesystem other than yours (say ext4) may be +modified in a later syscall. + +The second case to bear in mind is that jbd2_journal_start() can block +if there isn't enough space in the journal for your transaction (based +on the passed nblocks param) - when it blocks it merely(!) needs to wait +for transactions to complete and be committed from other tasks, so +essentially we are waiting for jbd2_journal_stop(). So to avoid +deadlocks you must treat jbd2_journal_start() / +jbd2_journal_stop() as if they were semaphores and include them in +your semaphore ordering rules to prevent +deadlocks. Note that jbd2_journal_extend() has similar blocking +behaviour to jbd2_journal_start() so you can deadlock here just as +easily as on jbd2_journal_start(). + +Try to reserve the right number of blocks the first time. ;-). This will +be the maximum number of blocks you are going to touch in this +transaction. I advise having a look at at least ext4_jbd.h to see the +basis on which ext4 uses to make these decisions. + +Another wriggle to watch out for is your on-disk block allocation +strategy. Why? Because, if you do a delete, you need to ensure you +haven't reused any of the freed blocks until the transaction freeing +these blocks commits. If you reused these blocks and crash happens, +there is no way to restore the contents of the reallocated blocks at the +end of the last fully committed transaction. One simple way of doing +this is to mark blocks as free in internal in-memory block allocation +structures only after the transaction freeing them commits. Ext4 uses +journal commit callback for this purpose. + +With journal commit callbacks you can ask the journalling layer to call +a callback function when the transaction is finally committed to disk, +so that you can do some of your own management. You ask the journalling +layer for calling the callback by simply setting +``journal->j_commit_callback`` function pointer and that function is +called after each transaction commit. You can also use +``transaction->t_private_list`` for attaching entries to a transaction +that need processing when the transaction commits. + +JBD2 also provides a way to block all transaction updates via +jbd2_journal_lock_updates() / +jbd2_journal_unlock_updates(). Ext4 uses this when it wants a +window with a clean and stable fs for a moment. E.g. + +:: + + + jbd2_journal_lock_updates() //stop new stuff happening.. + jbd2_journal_flush() // checkpoint everything. + ..do stuff on stable fs + jbd2_journal_unlock_updates() // carry on with filesystem use. + +The opportunities for abuse and DOS attacks with this should be obvious, +if you allow unprivileged userspace to trigger codepaths containing +these calls. + +Fast commits +~~~~~~~~~~~~ + +JBD2 to also allows you to perform file-system specific delta commits known as +fast commits. In order to use fast commits, you will need to set following +callbacks that perform correspodning work: + +`journal->j_fc_cleanup_cb`: Cleanup function called after every full commit and +fast commit. + +`journal->j_fc_replay_cb`: Replay function called for replay of fast commit +blocks. + +File system is free to perform fast commits as and when it wants as long as it +gets permission from JBD2 to do so by calling the function +:c:func:`jbd2_fc_begin_commit()`. Once a fast commit is done, the client +file system should tell JBD2 about it by calling +:c:func:`jbd2_fc_end_commit()`. If file system wants JBD2 to perform a full +commit immediately after stopping the fast commit it can do so by calling +:c:func:`jbd2_fc_end_commit_fallback()`. This is useful if fast commit operation +fails for some reason and the only way to guarantee consistency is for JBD2 to +perform the full traditional commit. + +JBD2 helper functions to manage fast commit buffers. File system can use +:c:func:`jbd2_fc_get_buf()` and :c:func:`jbd2_fc_wait_bufs()` to allocate +and wait on IO completion of fast commit buffers. + +Currently, only Ext4 implements fast commits. For details of its implementation +of fast commits, please refer to the top level comments in +fs/ext4/fast_commit.c. + +Summary +~~~~~~~ + +Using the journal is a matter of wrapping the different context changes, +being each mount, each modification (transaction) and each changed +buffer to tell the journalling layer about them. + +Data Types +---------- + +The journalling layer uses typedefs to 'hide' the concrete definitions +of the structures used. As a client of the JBD2 layer you can just rely +on the using the pointer as a magic cookie of some sort. Obviously the +hiding is not enforced as this is 'C'. + +Structures +~~~~~~~~~~ + +.. kernel-doc:: include/linux/jbd2.h + :internal: + +Functions +--------- + +The functions here are split into two groups those that affect a journal +as a whole, and those which are used to manage transactions + +Journal Level +~~~~~~~~~~~~~ + +.. kernel-doc:: fs/jbd2/journal.c + :export: + +.. kernel-doc:: fs/jbd2/recovery.c + :internal: + +Transasction Level +~~~~~~~~~~~~~~~~~~ + +.. kernel-doc:: fs/jbd2/transaction.c + +See also +-------- + +`Journaling the Linux ext2fs Filesystem, LinuxExpo 98, Stephen +Tweedie <http://kernel.org/pub/linux/kernel/people/sct/ext3/journal-design.ps.gz>`__ + +`Ext3 Journalling FileSystem, OLS 2000, Dr. Stephen +Tweedie <http://olstrans.sourceforge.net/release/OLS2000-ext3/OLS2000-ext3.html>`__ + diff --git a/Documentation/filesystems/locking.rst b/Documentation/filesystems/locking.rst new file mode 100644 index 000000000..c0f2c7586 --- /dev/null +++ b/Documentation/filesystems/locking.rst @@ -0,0 +1,666 @@ +======= +Locking +======= + +The text below describes the locking rules for VFS-related methods. +It is (believed to be) up-to-date. *Please*, if you change anything in +prototypes or locking protocols - update this file. And update the relevant +instances in the tree, don't leave that to maintainers of filesystems/devices/ +etc. At the very least, put the list of dubious cases in the end of this file. +Don't turn it into log - maintainers of out-of-the-tree code are supposed to +be able to use diff(1). + +Thing currently missing here: socket operations. Alexey? + +dentry_operations +================= + +prototypes:: + + int (*d_revalidate)(struct dentry *, unsigned int); + int (*d_weak_revalidate)(struct dentry *, unsigned int); + int (*d_hash)(const struct dentry *, struct qstr *); + int (*d_compare)(const struct dentry *, + unsigned int, const char *, const struct qstr *); + int (*d_delete)(struct dentry *); + int (*d_init)(struct dentry *); + void (*d_release)(struct dentry *); + void (*d_iput)(struct dentry *, struct inode *); + char *(*d_dname)((struct dentry *dentry, char *buffer, int buflen); + struct vfsmount *(*d_automount)(struct path *path); + int (*d_manage)(const struct path *, bool); + struct dentry *(*d_real)(struct dentry *, const struct inode *); + +locking rules: + +================== =========== ======== ============== ======== +ops rename_lock ->d_lock may block rcu-walk +================== =========== ======== ============== ======== +d_revalidate: no no yes (ref-walk) maybe +d_weak_revalidate: no no yes no +d_hash no no no maybe +d_compare: yes no no maybe +d_delete: no yes no no +d_init: no no yes no +d_release: no no yes no +d_prune: no yes no no +d_iput: no no yes no +d_dname: no no no no +d_automount: no no yes no +d_manage: no no yes (ref-walk) maybe +d_real no no yes no +================== =========== ======== ============== ======== + +inode_operations +================ + +prototypes:: + + int (*create) (struct inode *,struct dentry *,umode_t, bool); + struct dentry * (*lookup) (struct inode *,struct dentry *, unsigned int); + int (*link) (struct dentry *,struct inode *,struct dentry *); + int (*unlink) (struct inode *,struct dentry *); + int (*symlink) (struct inode *,struct dentry *,const char *); + int (*mkdir) (struct inode *,struct dentry *,umode_t); + int (*rmdir) (struct inode *,struct dentry *); + int (*mknod) (struct inode *,struct dentry *,umode_t,dev_t); + int (*rename) (struct inode *, struct dentry *, + struct inode *, struct dentry *, unsigned int); + int (*readlink) (struct dentry *, char __user *,int); + const char *(*get_link) (struct dentry *, struct inode *, struct delayed_call *); + void (*truncate) (struct inode *); + int (*permission) (struct inode *, int, unsigned int); + int (*get_acl)(struct inode *, int); + int (*setattr) (struct dentry *, struct iattr *); + int (*getattr) (const struct path *, struct kstat *, u32, unsigned int); + ssize_t (*listxattr) (struct dentry *, char *, size_t); + int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start, u64 len); + void (*update_time)(struct inode *, struct timespec *, int); + int (*atomic_open)(struct inode *, struct dentry *, + struct file *, unsigned open_flag, + umode_t create_mode); + int (*tmpfile) (struct inode *, struct dentry *, umode_t); + +locking rules: + all may block + +============ ============================================= +ops i_rwsem(inode) +============ ============================================= +lookup: shared +create: exclusive +link: exclusive (both) +mknod: exclusive +symlink: exclusive +mkdir: exclusive +unlink: exclusive (both) +rmdir: exclusive (both)(see below) +rename: exclusive (all) (see below) +readlink: no +get_link: no +setattr: exclusive +permission: no (may not block if called in rcu-walk mode) +get_acl: no +getattr: no +listxattr: no +fiemap: no +update_time: no +atomic_open: shared (exclusive if O_CREAT is set in open flags) +tmpfile: no +============ ============================================= + + + Additionally, ->rmdir(), ->unlink() and ->rename() have ->i_rwsem + exclusive on victim. + cross-directory ->rename() has (per-superblock) ->s_vfs_rename_sem. + +See Documentation/filesystems/directory-locking.rst for more detailed discussion +of the locking scheme for directory operations. + +xattr_handler operations +======================== + +prototypes:: + + bool (*list)(struct dentry *dentry); + int (*get)(const struct xattr_handler *handler, struct dentry *dentry, + struct inode *inode, const char *name, void *buffer, + size_t size); + int (*set)(const struct xattr_handler *handler, struct dentry *dentry, + struct inode *inode, const char *name, const void *buffer, + size_t size, int flags); + +locking rules: + all may block + +===== ============== +ops i_rwsem(inode) +===== ============== +list: no +get: no +set: exclusive +===== ============== + +super_operations +================ + +prototypes:: + + struct inode *(*alloc_inode)(struct super_block *sb); + void (*free_inode)(struct inode *); + void (*destroy_inode)(struct inode *); + void (*dirty_inode) (struct inode *, int flags); + int (*write_inode) (struct inode *, struct writeback_control *wbc); + int (*drop_inode) (struct inode *); + void (*evict_inode) (struct inode *); + void (*put_super) (struct super_block *); + int (*sync_fs)(struct super_block *sb, int wait); + int (*freeze_fs) (struct super_block *); + int (*unfreeze_fs) (struct super_block *); + int (*statfs) (struct dentry *, struct kstatfs *); + int (*remount_fs) (struct super_block *, int *, char *); + void (*umount_begin) (struct super_block *); + int (*show_options)(struct seq_file *, struct dentry *); + ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t); + ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t); + int (*bdev_try_to_free_page)(struct super_block*, struct page*, gfp_t); + +locking rules: + All may block [not true, see below] + +====================== ============ ======================== +ops s_umount note +====================== ============ ======================== +alloc_inode: +free_inode: called from RCU callback +destroy_inode: +dirty_inode: +write_inode: +drop_inode: !!!inode->i_lock!!! +evict_inode: +put_super: write +sync_fs: read +freeze_fs: write +unfreeze_fs: write +statfs: maybe(read) (see below) +remount_fs: write +umount_begin: no +show_options: no (namespace_sem) +quota_read: no (see below) +quota_write: no (see below) +bdev_try_to_free_page: no (see below) +====================== ============ ======================== + +->statfs() has s_umount (shared) when called by ustat(2) (native or +compat), but that's an accident of bad API; s_umount is used to pin +the superblock down when we only have dev_t given us by userland to +identify the superblock. Everything else (statfs(), fstatfs(), etc.) +doesn't hold it when calling ->statfs() - superblock is pinned down +by resolving the pathname passed to syscall. + +->quota_read() and ->quota_write() functions are both guaranteed to +be the only ones operating on the quota file by the quota code (via +dqio_sem) (unless an admin really wants to screw up something and +writes to quota files with quotas on). For other details about locking +see also dquot_operations section. + +->bdev_try_to_free_page is called from the ->releasepage handler of +the block device inode. See there for more details. + +file_system_type +================ + +prototypes:: + + struct dentry *(*mount) (struct file_system_type *, int, + const char *, void *); + void (*kill_sb) (struct super_block *); + +locking rules: + +======= ========= +ops may block +======= ========= +mount yes +kill_sb yes +======= ========= + +->mount() returns ERR_PTR or the root dentry; its superblock should be locked +on return. + +->kill_sb() takes a write-locked superblock, does all shutdown work on it, +unlocks and drops the reference. + +address_space_operations +======================== +prototypes:: + + int (*writepage)(struct page *page, struct writeback_control *wbc); + int (*readpage)(struct file *, struct page *); + int (*writepages)(struct address_space *, struct writeback_control *); + int (*set_page_dirty)(struct page *page); + void (*readahead)(struct readahead_control *); + int (*readpages)(struct file *filp, struct address_space *mapping, + struct list_head *pages, unsigned nr_pages); + int (*write_begin)(struct file *, struct address_space *mapping, + loff_t pos, unsigned len, unsigned flags, + struct page **pagep, void **fsdata); + int (*write_end)(struct file *, struct address_space *mapping, + loff_t pos, unsigned len, unsigned copied, + struct page *page, void *fsdata); + sector_t (*bmap)(struct address_space *, sector_t); + void (*invalidatepage) (struct page *, unsigned int, unsigned int); + int (*releasepage) (struct page *, int); + void (*freepage)(struct page *); + int (*direct_IO)(struct kiocb *, struct iov_iter *iter); + bool (*isolate_page) (struct page *, isolate_mode_t); + int (*migratepage)(struct address_space *, struct page *, struct page *); + void (*putback_page) (struct page *); + int (*launder_page)(struct page *); + int (*is_partially_uptodate)(struct page *, unsigned long, unsigned long); + int (*error_remove_page)(struct address_space *, struct page *); + int (*swap_activate)(struct file *); + int (*swap_deactivate)(struct file *); + +locking rules: + All except set_page_dirty and freepage may block + +====================== ======================== ========= +ops PageLocked(page) i_rwsem +====================== ======================== ========= +writepage: yes, unlocks (see below) +readpage: yes, unlocks +writepages: +set_page_dirty no +readahead: yes, unlocks +readpages: no +write_begin: locks the page exclusive +write_end: yes, unlocks exclusive +bmap: +invalidatepage: yes +releasepage: yes +freepage: yes +direct_IO: +isolate_page: yes +migratepage: yes (both) +putback_page: yes +launder_page: yes +is_partially_uptodate: yes +error_remove_page: yes +swap_activate: no +swap_deactivate: no +====================== ======================== ========= + +->write_begin(), ->write_end() and ->readpage() may be called from +the request handler (/dev/loop). + +->readpage() unlocks the page, either synchronously or via I/O +completion. + +->readahead() unlocks the pages that I/O is attempted on like ->readpage(). + +->readpages() populates the pagecache with the passed pages and starts +I/O against them. They come unlocked upon I/O completion. + +->writepage() is used for two purposes: for "memory cleansing" and for +"sync". These are quite different operations and the behaviour may differ +depending upon the mode. + +If writepage is called for sync (wbc->sync_mode != WBC_SYNC_NONE) then +it *must* start I/O against the page, even if that would involve +blocking on in-progress I/O. + +If writepage is called for memory cleansing (sync_mode == +WBC_SYNC_NONE) then its role is to get as much writeout underway as +possible. So writepage should try to avoid blocking against +currently-in-progress I/O. + +If the filesystem is not called for "sync" and it determines that it +would need to block against in-progress I/O to be able to start new I/O +against the page the filesystem should redirty the page with +redirty_page_for_writepage(), then unlock the page and return zero. +This may also be done to avoid internal deadlocks, but rarely. + +If the filesystem is called for sync then it must wait on any +in-progress I/O and then start new I/O. + +The filesystem should unlock the page synchronously, before returning to the +caller, unless ->writepage() returns special WRITEPAGE_ACTIVATE +value. WRITEPAGE_ACTIVATE means that page cannot really be written out +currently, and VM should stop calling ->writepage() on this page for some +time. VM does this by moving page to the head of the active list, hence the +name. + +Unless the filesystem is going to redirty_page_for_writepage(), unlock the page +and return zero, writepage *must* run set_page_writeback() against the page, +followed by unlocking it. Once set_page_writeback() has been run against the +page, write I/O can be submitted and the write I/O completion handler must run +end_page_writeback() once the I/O is complete. If no I/O is submitted, the +filesystem must run end_page_writeback() against the page before returning from +writepage. + +That is: after 2.5.12, pages which are under writeout are *not* locked. Note, +if the filesystem needs the page to be locked during writeout, that is ok, too, +the page is allowed to be unlocked at any point in time between the calls to +set_page_writeback() and end_page_writeback(). + +Note, failure to run either redirty_page_for_writepage() or the combination of +set_page_writeback()/end_page_writeback() on a page submitted to writepage +will leave the page itself marked clean but it will be tagged as dirty in the +radix tree. This incoherency can lead to all sorts of hard-to-debug problems +in the filesystem like having dirty inodes at umount and losing written data. + +->writepages() is used for periodic writeback and for syscall-initiated +sync operations. The address_space should start I/O against at least +``*nr_to_write`` pages. ``*nr_to_write`` must be decremented for each page +which is written. The address_space implementation may write more (or less) +pages than ``*nr_to_write`` asks for, but it should try to be reasonably close. +If nr_to_write is NULL, all dirty pages must be written. + +writepages should _only_ write pages which are present on +mapping->io_pages. + +->set_page_dirty() is called from various places in the kernel +when the target page is marked as needing writeback. It may be called +under spinlock (it cannot block) and is sometimes called with the page +not locked. + +->bmap() is currently used by legacy ioctl() (FIBMAP) provided by some +filesystems and by the swapper. The latter will eventually go away. Please, +keep it that way and don't breed new callers. + +->invalidatepage() is called when the filesystem must attempt to drop +some or all of the buffers from the page when it is being truncated. It +returns zero on success. If ->invalidatepage is zero, the kernel uses +block_invalidatepage() instead. + +->releasepage() is called when the kernel is about to try to drop the +buffers from the page in preparation for freeing it. It returns zero to +indicate that the buffers are (or may be) freeable. If ->releasepage is zero, +the kernel assumes that the fs has no private interest in the buffers. + +->freepage() is called when the kernel is done dropping the page +from the page cache. + +->launder_page() may be called prior to releasing a page if +it is still found to be dirty. It returns zero if the page was successfully +cleaned, or an error value if not. Note that in order to prevent the page +getting mapped back in and redirtied, it needs to be kept locked +across the entire operation. + +->swap_activate will be called with a non-zero argument on +files backing (non block device backed) swapfiles. A return value +of zero indicates success, in which case this file can be used for +backing swapspace. The swapspace operations will be proxied to the +address space operations. + +->swap_deactivate() will be called in the sys_swapoff() +path after ->swap_activate() returned success. + +file_lock_operations +==================== + +prototypes:: + + void (*fl_copy_lock)(struct file_lock *, struct file_lock *); + void (*fl_release_private)(struct file_lock *); + + +locking rules: + +=================== ============= ========= +ops inode->i_lock may block +=================== ============= ========= +fl_copy_lock: yes no +fl_release_private: maybe maybe[1]_ +=================== ============= ========= + +.. [1]: + ->fl_release_private for flock or POSIX locks is currently allowed + to block. Leases however can still be freed while the i_lock is held and + so fl_release_private called on a lease should not block. + +lock_manager_operations +======================= + +prototypes:: + + void (*lm_notify)(struct file_lock *); /* unblock callback */ + int (*lm_grant)(struct file_lock *, struct file_lock *, int); + void (*lm_break)(struct file_lock *); /* break_lease callback */ + int (*lm_change)(struct file_lock **, int); + bool (*lm_breaker_owns_lease)(struct file_lock *); + +locking rules: + +====================== ============= ================= ========= +ops inode->i_lock blocked_lock_lock may block +====================== ============= ================= ========= +lm_notify: yes yes no +lm_grant: no no no +lm_break: yes no no +lm_change yes no no +lm_breaker_owns_lease: no no no +====================== ============= ================= ========= + +buffer_head +=========== + +prototypes:: + + void (*b_end_io)(struct buffer_head *bh, int uptodate); + +locking rules: + +called from interrupts. In other words, extreme care is needed here. +bh is locked, but that's all warranties we have here. Currently only RAID1, +highmem, fs/buffer.c, and fs/ntfs/aops.c are providing these. Block devices +call this method upon the IO completion. + +block_device_operations +======================= +prototypes:: + + int (*open) (struct block_device *, fmode_t); + int (*release) (struct gendisk *, fmode_t); + int (*ioctl) (struct block_device *, fmode_t, unsigned, unsigned long); + int (*compat_ioctl) (struct block_device *, fmode_t, unsigned, unsigned long); + int (*direct_access) (struct block_device *, sector_t, void **, + unsigned long *); + void (*unlock_native_capacity) (struct gendisk *); + int (*revalidate_disk) (struct gendisk *); + int (*getgeo)(struct block_device *, struct hd_geometry *); + void (*swap_slot_free_notify) (struct block_device *, unsigned long); + +locking rules: + +======================= =================== +ops bd_mutex +======================= =================== +open: yes +release: yes +ioctl: no +compat_ioctl: no +direct_access: no +unlock_native_capacity: no +revalidate_disk: no +getgeo: no +swap_slot_free_notify: no (see below) +======================= =================== + +swap_slot_free_notify is called with swap_lock and sometimes the page lock +held. + + +file_operations +=============== + +prototypes:: + + loff_t (*llseek) (struct file *, loff_t, int); + ssize_t (*read) (struct file *, char __user *, size_t, loff_t *); + ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *); + ssize_t (*read_iter) (struct kiocb *, struct iov_iter *); + ssize_t (*write_iter) (struct kiocb *, struct iov_iter *); + int (*iterate) (struct file *, struct dir_context *); + int (*iterate_shared) (struct file *, struct dir_context *); + __poll_t (*poll) (struct file *, struct poll_table_struct *); + long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long); + long (*compat_ioctl) (struct file *, unsigned int, unsigned long); + int (*mmap) (struct file *, struct vm_area_struct *); + int (*open) (struct inode *, struct file *); + int (*flush) (struct file *); + int (*release) (struct inode *, struct file *); + int (*fsync) (struct file *, loff_t start, loff_t end, int datasync); + int (*fasync) (int, struct file *, int); + int (*lock) (struct file *, int, struct file_lock *); + ssize_t (*readv) (struct file *, const struct iovec *, unsigned long, + loff_t *); + ssize_t (*writev) (struct file *, const struct iovec *, unsigned long, + loff_t *); + ssize_t (*sendfile) (struct file *, loff_t *, size_t, read_actor_t, + void __user *); + ssize_t (*sendpage) (struct file *, struct page *, int, size_t, + loff_t *, int); + unsigned long (*get_unmapped_area)(struct file *, unsigned long, + unsigned long, unsigned long, unsigned long); + int (*check_flags)(int); + int (*flock) (struct file *, int, struct file_lock *); + ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, loff_t *, + size_t, unsigned int); + ssize_t (*splice_read)(struct file *, loff_t *, struct pipe_inode_info *, + size_t, unsigned int); + int (*setlease)(struct file *, long, struct file_lock **, void **); + long (*fallocate)(struct file *, int, loff_t, loff_t); + +locking rules: + All may block. + +->llseek() locking has moved from llseek to the individual llseek +implementations. If your fs is not using generic_file_llseek, you +need to acquire and release the appropriate locks in your ->llseek(). +For many filesystems, it is probably safe to acquire the inode +mutex or just to use i_size_read() instead. +Note: this does not protect the file->f_pos against concurrent modifications +since this is something the userspace has to take care about. + +->iterate() is called with i_rwsem exclusive. + +->iterate_shared() is called with i_rwsem at least shared. + +->fasync() is responsible for maintaining the FASYNC bit in filp->f_flags. +Most instances call fasync_helper(), which does that maintenance, so it's +not normally something one needs to worry about. Return values > 0 will be +mapped to zero in the VFS layer. + +->readdir() and ->ioctl() on directories must be changed. Ideally we would +move ->readdir() to inode_operations and use a separate method for directory +->ioctl() or kill the latter completely. One of the problems is that for +anything that resembles union-mount we won't have a struct file for all +components. And there are other reasons why the current interface is a mess... + +->read on directories probably must go away - we should just enforce -EISDIR +in sys_read() and friends. + +->setlease operations should call generic_setlease() before or after setting +the lease within the individual filesystem to record the result of the +operation + +dquot_operations +================ + +prototypes:: + + int (*write_dquot) (struct dquot *); + int (*acquire_dquot) (struct dquot *); + int (*release_dquot) (struct dquot *); + int (*mark_dirty) (struct dquot *); + int (*write_info) (struct super_block *, int); + +These operations are intended to be more or less wrapping functions that ensure +a proper locking wrt the filesystem and call the generic quota operations. + +What filesystem should expect from the generic quota functions: + +============== ============ ========================= +ops FS recursion Held locks when called +============== ============ ========================= +write_dquot: yes dqonoff_sem or dqptr_sem +acquire_dquot: yes dqonoff_sem or dqptr_sem +release_dquot: yes dqonoff_sem or dqptr_sem +mark_dirty: no - +write_info: yes dqonoff_sem +============== ============ ========================= + +FS recursion means calling ->quota_read() and ->quota_write() from superblock +operations. + +More details about quota locking can be found in fs/dquot.c. + +vm_operations_struct +==================== + +prototypes:: + + void (*open)(struct vm_area_struct*); + void (*close)(struct vm_area_struct*); + vm_fault_t (*fault)(struct vm_area_struct*, struct vm_fault *); + vm_fault_t (*page_mkwrite)(struct vm_area_struct *, struct vm_fault *); + vm_fault_t (*pfn_mkwrite)(struct vm_area_struct *, struct vm_fault *); + int (*access)(struct vm_area_struct *, unsigned long, void*, int, int); + +locking rules: + +============= ========= =========================== +ops mmap_lock PageLocked(page) +============= ========= =========================== +open: yes +close: yes +fault: yes can return with page locked +map_pages: yes +page_mkwrite: yes can return with page locked +pfn_mkwrite: yes +access: yes +============= ========= =========================== + +->fault() is called when a previously not present pte is about +to be faulted in. The filesystem must find and return the page associated +with the passed in "pgoff" in the vm_fault structure. If it is possible that +the page may be truncated and/or invalidated, then the filesystem must lock +the page, then ensure it is not already truncated (the page lock will block +subsequent truncate), and then return with VM_FAULT_LOCKED, and the page +locked. The VM will unlock the page. + +->map_pages() is called when VM asks to map easy accessible pages. +Filesystem should find and map pages associated with offsets from "start_pgoff" +till "end_pgoff". ->map_pages() is called with page table locked and must +not block. If it's not possible to reach a page without blocking, +filesystem should skip it. Filesystem should use do_set_pte() to setup +page table entry. Pointer to entry associated with the page is passed in +"pte" field in vm_fault structure. Pointers to entries for other offsets +should be calculated relative to "pte". + +->page_mkwrite() is called when a previously read-only pte is +about to become writeable. The filesystem again must ensure that there are +no truncate/invalidate races, and then return with the page locked. If +the page has been truncated, the filesystem should not look up a new page +like the ->fault() handler, but simply return with VM_FAULT_NOPAGE, which +will cause the VM to retry the fault. + +->pfn_mkwrite() is the same as page_mkwrite but when the pte is +VM_PFNMAP or VM_MIXEDMAP with a page-less entry. Expected return is +VM_FAULT_NOPAGE. Or one of the VM_FAULT_ERROR types. The default behavior +after this call is to make the pte read-write, unless pfn_mkwrite returns +an error. + +->access() is called when get_user_pages() fails in +access_process_vm(), typically used to debug a process through +/proc/pid/mem or ptrace. This function is needed only for +VM_IO | VM_PFNMAP VMAs. + +-------------------------------------------------------------------------------- + + Dubious stuff + +(if you break something or notice that it is broken and do not fix it yourself +- at least put it here) diff --git a/Documentation/filesystems/locks.rst b/Documentation/filesystems/locks.rst new file mode 100644 index 000000000..c5ae858b1 --- /dev/null +++ b/Documentation/filesystems/locks.rst @@ -0,0 +1,72 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================== +File Locking Release Notes +========================== + + Andy Walker <andy@lysaker.kvaerner.no> + + 12 May 1997 + + +1. What's New? +============== + +1.1 Broken Flock Emulation +-------------------------- + +The old flock(2) emulation in the kernel was swapped for proper BSD +compatible flock(2) support in the 1.3.x series of kernels. With the +release of the 2.1.x kernel series, support for the old emulation has +been totally removed, so that we don't need to carry this baggage +forever. + +This should not cause problems for anybody, since everybody using a +2.1.x kernel should have updated their C library to a suitable version +anyway (see the file "Documentation/process/changes.rst".) + +1.2 Allow Mixed Locks Again +--------------------------- + +1.2.1 Typical Problems - Sendmail +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +Because sendmail was unable to use the old flock() emulation, many sendmail +installations use fcntl() instead of flock(). This is true of Slackware 3.0 +for example. This gave rise to some other subtle problems if sendmail was +configured to rebuild the alias file. Sendmail tried to lock the aliases.dir +file with fcntl() at the same time as the GDBM routines tried to lock this +file with flock(). With pre 1.3.96 kernels this could result in deadlocks that, +over time, or under a very heavy mail load, would eventually cause the kernel +to lock solid with deadlocked processes. + + +1.2.2 The Solution +^^^^^^^^^^^^^^^^^^ +The solution I have chosen, after much experimentation and discussion, +is to make flock() and fcntl() locks oblivious to each other. Both can +exists, and neither will have any effect on the other. + +I wanted the two lock styles to be cooperative, but there were so many +race and deadlock conditions that the current solution was the only +practical one. It puts us in the same position as, for example, SunOS +4.1.x and several other commercial Unices. The only OS's that support +cooperative flock()/fcntl() are those that emulate flock() using +fcntl(), with all the problems that implies. + + +1.3 Mandatory Locking As A Mount Option +--------------------------------------- + +Mandatory locking, as described in +'Documentation/filesystems/mandatory-locking.rst' was prior to this release a +general configuration option that was valid for all mounted filesystems. This +had a number of inherent dangers, not the least of which was the ability to +freeze an NFS server by asking it to read a file for which a mandatory lock +existed. + +From this release of the kernel, mandatory locking can be turned on and off +on a per-filesystem basis, using the mount options 'mand' and 'nomand'. +The default is to disallow mandatory locking. The intention is that +mandatory locking only be enabled on a local filesystem as the specific need +arises. + diff --git a/Documentation/filesystems/mandatory-locking.rst b/Documentation/filesystems/mandatory-locking.rst new file mode 100644 index 000000000..9ce73544a --- /dev/null +++ b/Documentation/filesystems/mandatory-locking.rst @@ -0,0 +1,188 @@ +.. SPDX-License-Identifier: GPL-2.0 + +===================================================== +Mandatory File Locking For The Linux Operating System +===================================================== + + Andy Walker <andy@lysaker.kvaerner.no> + + 15 April 1996 + + (Updated September 2007) + +0. Why you should avoid mandatory locking +----------------------------------------- + +The Linux implementation is prey to a number of difficult-to-fix race +conditions which in practice make it not dependable: + + - The write system call checks for a mandatory lock only once + at its start. It is therefore possible for a lock request to + be granted after this check but before the data is modified. + A process may then see file data change even while a mandatory + lock was held. + - Similarly, an exclusive lock may be granted on a file after + the kernel has decided to proceed with a read, but before the + read has actually completed, and the reading process may see + the file data in a state which should not have been visible + to it. + - Similar races make the claimed mutual exclusion between lock + and mmap similarly unreliable. + +1. What is mandatory locking? +------------------------------ + +Mandatory locking is kernel enforced file locking, as opposed to the more usual +cooperative file locking used to guarantee sequential access to files among +processes. File locks are applied using the flock() and fcntl() system calls +(and the lockf() library routine which is a wrapper around fcntl().) It is +normally a process' responsibility to check for locks on a file it wishes to +update, before applying its own lock, updating the file and unlocking it again. +The most commonly used example of this (and in the case of sendmail, the most +troublesome) is access to a user's mailbox. The mail user agent and the mail +transfer agent must guard against updating the mailbox at the same time, and +prevent reading the mailbox while it is being updated. + +In a perfect world all processes would use and honour a cooperative, or +"advisory" locking scheme. However, the world isn't perfect, and there's +a lot of poorly written code out there. + +In trying to address this problem, the designers of System V UNIX came up +with a "mandatory" locking scheme, whereby the operating system kernel would +block attempts by a process to write to a file that another process holds a +"read" -or- "shared" lock on, and block attempts to both read and write to a +file that a process holds a "write " -or- "exclusive" lock on. + +The System V mandatory locking scheme was intended to have as little impact as +possible on existing user code. The scheme is based on marking individual files +as candidates for mandatory locking, and using the existing fcntl()/lockf() +interface for applying locks just as if they were normal, advisory locks. + +.. Note:: + + 1. In saying "file" in the paragraphs above I am actually not telling + the whole truth. System V locking is based on fcntl(). The granularity of + fcntl() is such that it allows the locking of byte ranges in files, in + addition to entire files, so the mandatory locking rules also have byte + level granularity. + + 2. POSIX.1 does not specify any scheme for mandatory locking, despite + borrowing the fcntl() locking scheme from System V. The mandatory locking + scheme is defined by the System V Interface Definition (SVID) Version 3. + +2. Marking a file for mandatory locking +--------------------------------------- + +A file is marked as a candidate for mandatory locking by setting the group-id +bit in its file mode but removing the group-execute bit. This is an otherwise +meaningless combination, and was chosen by the System V implementors so as not +to break existing user programs. + +Note that the group-id bit is usually automatically cleared by the kernel when +a setgid file is written to. This is a security measure. The kernel has been +modified to recognize the special case of a mandatory lock candidate and to +refrain from clearing this bit. Similarly the kernel has been modified not +to run mandatory lock candidates with setgid privileges. + +3. Available implementations +---------------------------- + +I have considered the implementations of mandatory locking available with +SunOS 4.1.x, Solaris 2.x and HP-UX 9.x. + +Generally I have tried to make the most sense out of the behaviour exhibited +by these three reference systems. There are many anomalies. + +All the reference systems reject all calls to open() for a file on which +another process has outstanding mandatory locks. This is in direct +contravention of SVID 3, which states that only calls to open() with the +O_TRUNC flag set should be rejected. The Linux implementation follows the SVID +definition, which is the "Right Thing", since only calls with O_TRUNC can +modify the contents of the file. + +HP-UX even disallows open() with O_TRUNC for a file with advisory locks, not +just mandatory locks. That would appear to contravene POSIX.1. + +mmap() is another interesting case. All the operating systems mentioned +prevent mandatory locks from being applied to an mmap()'ed file, but HP-UX +also disallows advisory locks for such a file. SVID actually specifies the +paranoid HP-UX behaviour. + +In my opinion only MAP_SHARED mappings should be immune from locking, and then +only from mandatory locks - that is what is currently implemented. + +SunOS is so hopeless that it doesn't even honour the O_NONBLOCK flag for +mandatory locks, so reads and writes to locked files always block when they +should return EAGAIN. + +I'm afraid that this is such an esoteric area that the semantics described +below are just as valid as any others, so long as the main points seem to +agree. + +4. Semantics +------------ + +1. Mandatory locks can only be applied via the fcntl()/lockf() locking + interface - in other words the System V/POSIX interface. BSD style + locks using flock() never result in a mandatory lock. + +2. If a process has locked a region of a file with a mandatory read lock, then + other processes are permitted to read from that region. If any of these + processes attempts to write to the region it will block until the lock is + released, unless the process has opened the file with the O_NONBLOCK + flag in which case the system call will return immediately with the error + status EAGAIN. + +3. If a process has locked a region of a file with a mandatory write lock, all + attempts to read or write to that region block until the lock is released, + unless a process has opened the file with the O_NONBLOCK flag in which case + the system call will return immediately with the error status EAGAIN. + +4. Calls to open() with O_TRUNC, or to creat(), on a existing file that has + any mandatory locks owned by other processes will be rejected with the + error status EAGAIN. + +5. Attempts to apply a mandatory lock to a file that is memory mapped and + shared (via mmap() with MAP_SHARED) will be rejected with the error status + EAGAIN. + +6. Attempts to create a shared memory map of a file (via mmap() with MAP_SHARED) + that has any mandatory locks in effect will be rejected with the error status + EAGAIN. + +5. Which system calls are affected? +----------------------------------- + +Those which modify a file's contents, not just the inode. That gives read(), +write(), readv(), writev(), open(), creat(), mmap(), truncate() and +ftruncate(). truncate() and ftruncate() are considered to be "write" actions +for the purposes of mandatory locking. + +The affected region is usually defined as stretching from the current position +for the total number of bytes read or written. For the truncate calls it is +defined as the bytes of a file removed or added (we must also consider bytes +added, as a lock can specify just "the whole file", rather than a specific +range of bytes.) + +Note 3: I may have overlooked some system calls that need mandatory lock +checking in my eagerness to get this code out the door. Please let me know, or +better still fix the system calls yourself and submit a patch to me or Linus. + +6. Warning! +----------- + +Not even root can override a mandatory lock, so runaway processes can wreak +havoc if they lock crucial files. The way around it is to change the file +permissions (remove the setgid bit) before trying to read or write to it. +Of course, that might be a bit tricky if the system is hung :-( + +7. The "mand" mount option +-------------------------- +Mandatory locking is disabled on all filesystems by default, and must be +administratively enabled by mounting with "-o mand". That mount option +is only allowed if the mounting task has the CAP_SYS_ADMIN capability. + +Since kernel v4.5, it is possible to disable mandatory locking +altogether by setting CONFIG_MANDATORY_FILE_LOCKING to "n". A kernel +with this disabled will reject attempts to mount filesystems with the +"mand" mount option with the error status EPERM. diff --git a/Documentation/filesystems/mount_api.rst b/Documentation/filesystems/mount_api.rst new file mode 100644 index 000000000..d7f53d62b --- /dev/null +++ b/Documentation/filesystems/mount_api.rst @@ -0,0 +1,824 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================== +Filesystem Mount API +==================== + +.. CONTENTS + + (1) Overview. + + (2) The filesystem context. + + (3) The filesystem context operations. + + (4) Filesystem context security. + + (5) VFS filesystem context API. + + (6) Superblock creation helpers. + + (7) Parameter description. + + (8) Parameter helper functions. + + +Overview +======== + +The creation of new mounts is now to be done in a multistep process: + + (1) Create a filesystem context. + + (2) Parse the parameters and attach them to the context. Parameters are + expected to be passed individually from userspace, though legacy binary + parameters can also be handled. + + (3) Validate and pre-process the context. + + (4) Get or create a superblock and mountable root. + + (5) Perform the mount. + + (6) Return an error message attached to the context. + + (7) Destroy the context. + +To support this, the file_system_type struct gains two new fields:: + + int (*init_fs_context)(struct fs_context *fc); + const struct fs_parameter_description *parameters; + +The first is invoked to set up the filesystem-specific parts of a filesystem +context, including the additional space, and the second points to the +parameter description for validation at registration time and querying by a +future system call. + +Note that security initialisation is done *after* the filesystem is called so +that the namespaces may be adjusted first. + + +The Filesystem context +====================== + +The creation and reconfiguration of a superblock is governed by a filesystem +context. This is represented by the fs_context structure:: + + struct fs_context { + const struct fs_context_operations *ops; + struct file_system_type *fs_type; + void *fs_private; + struct dentry *root; + struct user_namespace *user_ns; + struct net *net_ns; + const struct cred *cred; + char *source; + char *subtype; + void *security; + void *s_fs_info; + unsigned int sb_flags; + unsigned int sb_flags_mask; + unsigned int s_iflags; + unsigned int lsm_flags; + enum fs_context_purpose purpose:8; + ... + }; + +The fs_context fields are as follows: + + * :: + + const struct fs_context_operations *ops + + These are operations that can be done on a filesystem context (see + below). This must be set by the ->init_fs_context() file_system_type + operation. + + * :: + + struct file_system_type *fs_type + + A pointer to the file_system_type of the filesystem that is being + constructed or reconfigured. This retains a reference on the type owner. + + * :: + + void *fs_private + + A pointer to the file system's private data. This is where the filesystem + will need to store any options it parses. + + * :: + + struct dentry *root + + A pointer to the root of the mountable tree (and indirectly, the + superblock thereof). This is filled in by the ->get_tree() op. If this + is set, an active reference on root->d_sb must also be held. + + * :: + + struct user_namespace *user_ns + struct net *net_ns + + There are a subset of the namespaces in use by the invoking process. They + retain references on each namespace. The subscribed namespaces may be + replaced by the filesystem to reflect other sources, such as the parent + mount superblock on an automount. + + * :: + + const struct cred *cred + + The mounter's credentials. This retains a reference on the credentials. + + * :: + + char *source + + This specifies the source. It may be a block device (e.g. /dev/sda1) or + something more exotic, such as the "host:/path" that NFS desires. + + * :: + + char *subtype + + This is a string to be added to the type displayed in /proc/mounts to + qualify it (used by FUSE). This is available for the filesystem to set if + desired. + + * :: + + void *security + + A place for the LSMs to hang their security data for the superblock. The + relevant security operations are described below. + + * :: + + void *s_fs_info + + The proposed s_fs_info for a new superblock, set in the superblock by + sget_fc(). This can be used to distinguish superblocks. + + * :: + + unsigned int sb_flags + unsigned int sb_flags_mask + + Which bits SB_* flags are to be set/cleared in super_block::s_flags. + + * :: + + unsigned int s_iflags + + These will be bitwise-OR'd with s->s_iflags when a superblock is created. + + * :: + + enum fs_context_purpose + + This indicates the purpose for which the context is intended. The + available values are: + + ========================== ====================================== + FS_CONTEXT_FOR_MOUNT, New superblock for explicit mount + FS_CONTEXT_FOR_SUBMOUNT New automatic submount of extant mount + FS_CONTEXT_FOR_RECONFIGURE Change an existing mount + ========================== ====================================== + +The mount context is created by calling vfs_new_fs_context() or +vfs_dup_fs_context() and is destroyed with put_fs_context(). Note that the +structure is not refcounted. + +VFS, security and filesystem mount options are set individually with +vfs_parse_mount_option(). Options provided by the old mount(2) system call as +a page of data can be parsed with generic_parse_monolithic(). + +When mounting, the filesystem is allowed to take data from any of the pointers +and attach it to the superblock (or whatever), provided it clears the pointer +in the mount context. + +The filesystem is also allowed to allocate resources and pin them with the +mount context. For instance, NFS might pin the appropriate protocol version +module. + + +The Filesystem Context Operations +================================= + +The filesystem context points to a table of operations:: + + struct fs_context_operations { + void (*free)(struct fs_context *fc); + int (*dup)(struct fs_context *fc, struct fs_context *src_fc); + int (*parse_param)(struct fs_context *fc, + struct fs_parameter *param); + int (*parse_monolithic)(struct fs_context *fc, void *data); + int (*get_tree)(struct fs_context *fc); + int (*reconfigure)(struct fs_context *fc); + }; + +These operations are invoked by the various stages of the mount procedure to +manage the filesystem context. They are as follows: + + * :: + + void (*free)(struct fs_context *fc); + + Called to clean up the filesystem-specific part of the filesystem context + when the context is destroyed. It should be aware that parts of the + context may have been removed and NULL'd out by ->get_tree(). + + * :: + + int (*dup)(struct fs_context *fc, struct fs_context *src_fc); + + Called when a filesystem context has been duplicated to duplicate the + filesystem-private data. An error may be returned to indicate failure to + do this. + + .. Warning:: + + Note that even if this fails, put_fs_context() will be called + immediately thereafter, so ->dup() *must* make the + filesystem-private data safe for ->free(). + + * :: + + int (*parse_param)(struct fs_context *fc, + struct fs_parameter *param); + + Called when a parameter is being added to the filesystem context. param + points to the key name and maybe a value object. VFS-specific options + will have been weeded out and fc->sb_flags updated in the context. + Security options will also have been weeded out and fc->security updated. + + The parameter can be parsed with fs_parse() and fs_lookup_param(). Note + that the source(s) are presented as parameters named "source". + + If successful, 0 should be returned or a negative error code otherwise. + + * :: + + int (*parse_monolithic)(struct fs_context *fc, void *data); + + Called when the mount(2) system call is invoked to pass the entire data + page in one go. If this is expected to be just a list of "key[=val]" + items separated by commas, then this may be set to NULL. + + The return value is as for ->parse_param(). + + If the filesystem (e.g. NFS) needs to examine the data first and then + finds it's the standard key-val list then it may pass it off to + generic_parse_monolithic(). + + * :: + + int (*get_tree)(struct fs_context *fc); + + Called to get or create the mountable root and superblock, using the + information stored in the filesystem context (reconfiguration goes via a + different vector). It may detach any resources it desires from the + filesystem context and transfer them to the superblock it creates. + + On success it should set fc->root to the mountable root and return 0. In + the case of an error, it should return a negative error code. + + The phase on a userspace-driven context will be set to only allow this to + be called once on any particular context. + + * :: + + int (*reconfigure)(struct fs_context *fc); + + Called to effect reconfiguration of a superblock using information stored + in the filesystem context. It may detach any resources it desires from + the filesystem context and transfer them to the superblock. The + superblock can be found from fc->root->d_sb. + + On success it should return 0. In the case of an error, it should return + a negative error code. + + .. Note:: reconfigure is intended as a replacement for remount_fs. + + +Filesystem context Security +=========================== + +The filesystem context contains a security pointer that the LSMs can use for +building up a security context for the superblock to be mounted. There are a +number of operations used by the new mount code for this purpose: + + * :: + + int security_fs_context_alloc(struct fs_context *fc, + struct dentry *reference); + + Called to initialise fc->security (which is preset to NULL) and allocate + any resources needed. It should return 0 on success or a negative error + code on failure. + + reference will be non-NULL if the context is being created for superblock + reconfiguration (FS_CONTEXT_FOR_RECONFIGURE) in which case it indicates + the root dentry of the superblock to be reconfigured. It will also be + non-NULL in the case of a submount (FS_CONTEXT_FOR_SUBMOUNT) in which case + it indicates the automount point. + + * :: + + int security_fs_context_dup(struct fs_context *fc, + struct fs_context *src_fc); + + Called to initialise fc->security (which is preset to NULL) and allocate + any resources needed. The original filesystem context is pointed to by + src_fc and may be used for reference. It should return 0 on success or a + negative error code on failure. + + * :: + + void security_fs_context_free(struct fs_context *fc); + + Called to clean up anything attached to fc->security. Note that the + contents may have been transferred to a superblock and the pointer cleared + during get_tree. + + * :: + + int security_fs_context_parse_param(struct fs_context *fc, + struct fs_parameter *param); + + Called for each mount parameter, including the source. The arguments are + as for the ->parse_param() method. It should return 0 to indicate that + the parameter should be passed on to the filesystem, 1 to indicate that + the parameter should be discarded or an error to indicate that the + parameter should be rejected. + + The value pointed to by param may be modified (if a string) or stolen + (provided the value pointer is NULL'd out). If it is stolen, 1 must be + returned to prevent it being passed to the filesystem. + + * :: + + int security_fs_context_validate(struct fs_context *fc); + + Called after all the options have been parsed to validate the collection + as a whole and to do any necessary allocation so that + security_sb_get_tree() and security_sb_reconfigure() are less likely to + fail. It should return 0 or a negative error code. + + In the case of reconfiguration, the target superblock will be accessible + via fc->root. + + * :: + + int security_sb_get_tree(struct fs_context *fc); + + Called during the mount procedure to verify that the specified superblock + is allowed to be mounted and to transfer the security data there. It + should return 0 or a negative error code. + + * :: + + void security_sb_reconfigure(struct fs_context *fc); + + Called to apply any reconfiguration to an LSM's context. It must not + fail. Error checking and resource allocation must be done in advance by + the parameter parsing and validation hooks. + + * :: + + int security_sb_mountpoint(struct fs_context *fc, + struct path *mountpoint, + unsigned int mnt_flags); + + Called during the mount procedure to verify that the root dentry attached + to the context is permitted to be attached to the specified mountpoint. + It should return 0 on success or a negative error code on failure. + + +VFS Filesystem context API +========================== + +There are four operations for creating a filesystem context and one for +destroying a context: + + * :: + + struct fs_context *fs_context_for_mount(struct file_system_type *fs_type, + unsigned int sb_flags); + + Allocate a filesystem context for the purpose of setting up a new mount, + whether that be with a new superblock or sharing an existing one. This + sets the superblock flags, initialises the security and calls + fs_type->init_fs_context() to initialise the filesystem private data. + + fs_type specifies the filesystem type that will manage the context and + sb_flags presets the superblock flags stored therein. + + * :: + + struct fs_context *fs_context_for_reconfigure( + struct dentry *dentry, + unsigned int sb_flags, + unsigned int sb_flags_mask); + + Allocate a filesystem context for the purpose of reconfiguring an + existing superblock. dentry provides a reference to the superblock to be + configured. sb_flags and sb_flags_mask indicate which superblock flags + need changing and to what. + + * :: + + struct fs_context *fs_context_for_submount( + struct file_system_type *fs_type, + struct dentry *reference); + + Allocate a filesystem context for the purpose of creating a new mount for + an automount point or other derived superblock. fs_type specifies the + filesystem type that will manage the context and the reference dentry + supplies the parameters. Namespaces are propagated from the reference + dentry's superblock also. + + Note that it's not a requirement that the reference dentry be of the same + filesystem type as fs_type. + + * :: + + struct fs_context *vfs_dup_fs_context(struct fs_context *src_fc); + + Duplicate a filesystem context, copying any options noted and duplicating + or additionally referencing any resources held therein. This is available + for use where a filesystem has to get a mount within a mount, such as NFS4 + does by internally mounting the root of the target server and then doing a + private pathwalk to the target directory. + + The purpose in the new context is inherited from the old one. + + * :: + + void put_fs_context(struct fs_context *fc); + + Destroy a filesystem context, releasing any resources it holds. This + calls the ->free() operation. This is intended to be called by anyone who + created a filesystem context. + + .. Warning:: + + filesystem contexts are not refcounted, so this causes unconditional + destruction. + +In all the above operations, apart from the put op, the return is a mount +context pointer or a negative error code. + +For the remaining operations, if an error occurs, a negative error code will be +returned. + + * :: + + int vfs_parse_fs_param(struct fs_context *fc, + struct fs_parameter *param); + + Supply a single mount parameter to the filesystem context. This includes + the specification of the source/device which is specified as the "source" + parameter (which may be specified multiple times if the filesystem + supports that). + + param specifies the parameter key name and the value. The parameter is + first checked to see if it corresponds to a standard mount flag (in which + case it is used to set an SB_xxx flag and consumed) or a security option + (in which case the LSM consumes it) before it is passed on to the + filesystem. + + The parameter value is typed and can be one of: + + ==================== ============================= + fs_value_is_flag Parameter not given a value + fs_value_is_string Value is a string + fs_value_is_blob Value is a binary blob + fs_value_is_filename Value is a filename* + dirfd + fs_value_is_file Value is an open file (file*) + ==================== ============================= + + If there is a value, that value is stored in a union in the struct in one + of param->{string,blob,name,file}. Note that the function may steal and + clear the pointer, but then becomes responsible for disposing of the + object. + + * :: + + int vfs_parse_fs_string(struct fs_context *fc, const char *key, + const char *value, size_t v_size); + + A wrapper around vfs_parse_fs_param() that copies the value string it is + passed. + + * :: + + int generic_parse_monolithic(struct fs_context *fc, void *data); + + Parse a sys_mount() data page, assuming the form to be a text list + consisting of key[=val] options separated by commas. Each item in the + list is passed to vfs_mount_option(). This is the default when the + ->parse_monolithic() method is NULL. + + * :: + + int vfs_get_tree(struct fs_context *fc); + + Get or create the mountable root and superblock, using the parameters in + the filesystem context to select/configure the superblock. This invokes + the ->get_tree() method. + + * :: + + struct vfsmount *vfs_create_mount(struct fs_context *fc); + + Create a mount given the parameters in the specified filesystem context. + Note that this does not attach the mount to anything. + + +Superblock Creation Helpers +=========================== + +A number of VFS helpers are available for use by filesystems for the creation +or looking up of superblocks. + + * :: + + struct super_block * + sget_fc(struct fs_context *fc, + int (*test)(struct super_block *sb, struct fs_context *fc), + int (*set)(struct super_block *sb, struct fs_context *fc)); + + This is the core routine. If test is non-NULL, it searches for an + existing superblock matching the criteria held in the fs_context, using + the test function to match them. If no match is found, a new superblock + is created and the set function is called to set it up. + + Prior to the set function being called, fc->s_fs_info will be transferred + to sb->s_fs_info - and fc->s_fs_info will be cleared if set returns + success (ie. 0). + +The following helpers all wrap sget_fc(): + + * :: + + int vfs_get_super(struct fs_context *fc, + enum vfs_get_super_keying keying, + int (*fill_super)(struct super_block *sb, + struct fs_context *fc)) + + This creates/looks up a deviceless superblock. The keying indicates how + many superblocks of this type may exist and in what manner they may be + shared: + + (1) vfs_get_single_super + + Only one such superblock may exist in the system. Any further + attempt to get a new superblock gets this one (and any parameter + differences are ignored). + + (2) vfs_get_keyed_super + + Multiple superblocks of this type may exist and they're keyed on + their s_fs_info pointer (for example this may refer to a + namespace). + + (3) vfs_get_independent_super + + Multiple independent superblocks of this type may exist. This + function never matches an existing one and always creates a new + one. + + +Parameter Description +===================== + +Parameters are described using structures defined in linux/fs_parser.h. +There's a core description struct that links everything together:: + + struct fs_parameter_description { + const struct fs_parameter_spec *specs; + const struct fs_parameter_enum *enums; + }; + +For example:: + + enum { + Opt_autocell, + Opt_bar, + Opt_dyn, + Opt_foo, + Opt_source, + }; + + static const struct fs_parameter_description afs_fs_parameters = { + .specs = afs_param_specs, + .enums = afs_param_enums, + }; + +The members are as follows: + + (1) :: + + const struct fs_parameter_specification *specs; + + Table of parameter specifications, terminated with a null entry, where the + entries are of type:: + + struct fs_parameter_spec { + const char *name; + u8 opt; + enum fs_parameter_type type:8; + unsigned short flags; + }; + + The 'name' field is a string to match exactly to the parameter key (no + wildcards, patterns and no case-independence) and 'opt' is the value that + will be returned by the fs_parser() function in the case of a successful + match. + + The 'type' field indicates the desired value type and must be one of: + + ======================= ======================= ===================== + TYPE NAME EXPECTED VALUE RESULT IN + ======================= ======================= ===================== + fs_param_is_flag No value n/a + fs_param_is_bool Boolean value result->boolean + fs_param_is_u32 32-bit unsigned int result->uint_32 + fs_param_is_u32_octal 32-bit octal int result->uint_32 + fs_param_is_u32_hex 32-bit hex int result->uint_32 + fs_param_is_s32 32-bit signed int result->int_32 + fs_param_is_u64 64-bit unsigned int result->uint_64 + fs_param_is_enum Enum value name result->uint_32 + fs_param_is_string Arbitrary string param->string + fs_param_is_blob Binary blob param->blob + fs_param_is_blockdev Blockdev path * Needs lookup + fs_param_is_path Path * Needs lookup + fs_param_is_fd File descriptor result->int_32 + ======================= ======================= ===================== + + Note that if the value is of fs_param_is_bool type, fs_parse() will try + to match any string value against "0", "1", "no", "yes", "false", "true". + + Each parameter can also be qualified with 'flags': + + ======================= ================================================ + fs_param_v_optional The value is optional + fs_param_neg_with_no result->negated set if key is prefixed with "no" + fs_param_neg_with_empty result->negated set if value is "" + fs_param_deprecated The parameter is deprecated. + ======================= ================================================ + + These are wrapped with a number of convenience wrappers: + + ======================= =============================================== + MACRO SPECIFIES + ======================= =============================================== + fsparam_flag() fs_param_is_flag + fsparam_flag_no() fs_param_is_flag, fs_param_neg_with_no + fsparam_bool() fs_param_is_bool + fsparam_u32() fs_param_is_u32 + fsparam_u32oct() fs_param_is_u32_octal + fsparam_u32hex() fs_param_is_u32_hex + fsparam_s32() fs_param_is_s32 + fsparam_u64() fs_param_is_u64 + fsparam_enum() fs_param_is_enum + fsparam_string() fs_param_is_string + fsparam_blob() fs_param_is_blob + fsparam_bdev() fs_param_is_blockdev + fsparam_path() fs_param_is_path + fsparam_fd() fs_param_is_fd + ======================= =============================================== + + all of which take two arguments, name string and option number - for + example:: + + static const struct fs_parameter_spec afs_param_specs[] = { + fsparam_flag ("autocell", Opt_autocell), + fsparam_flag ("dyn", Opt_dyn), + fsparam_string ("source", Opt_source), + fsparam_flag_no ("foo", Opt_foo), + {} + }; + + An addition macro, __fsparam() is provided that takes an additional pair + of arguments to specify the type and the flags for anything that doesn't + match one of the above macros. + + (2) :: + + const struct fs_parameter_enum *enums; + + Table of enum value names to integer mappings, terminated with a null + entry. This is of type:: + + struct fs_parameter_enum { + u8 opt; + char name[14]; + u8 value; + }; + + Where the array is an unsorted list of { parameter ID, name }-keyed + elements that indicate the value to map to, e.g.:: + + static const struct fs_parameter_enum afs_param_enums[] = { + { Opt_bar, "x", 1}, + { Opt_bar, "y", 23}, + { Opt_bar, "z", 42}, + }; + + If a parameter of type fs_param_is_enum is encountered, fs_parse() will + try to look the value up in the enum table and the result will be stored + in the parse result. + +The parser should be pointed to by the parser pointer in the file_system_type +struct as this will provide validation on registration (if +CONFIG_VALIDATE_FS_PARSER=y) and will allow the description to be queried from +userspace using the fsinfo() syscall. + + +Parameter Helper Functions +========================== + +A number of helper functions are provided to help a filesystem or an LSM +process the parameters it is given. + + * :: + + int lookup_constant(const struct constant_table tbl[], + const char *name, int not_found); + + Look up a constant by name in a table of name -> integer mappings. The + table is an array of elements of the following type:: + + struct constant_table { + const char *name; + int value; + }; + + If a match is found, the corresponding value is returned. If a match + isn't found, the not_found value is returned instead. + + * :: + + bool validate_constant_table(const struct constant_table *tbl, + size_t tbl_size, + int low, int high, int special); + + Validate a constant table. Checks that all the elements are appropriately + ordered, that there are no duplicates and that the values are between low + and high inclusive, though provision is made for one allowable special + value outside of that range. If no special value is required, special + should just be set to lie inside the low-to-high range. + + If all is good, true is returned. If the table is invalid, errors are + logged to dmesg and false is returned. + + * :: + + bool fs_validate_description(const struct fs_parameter_description *desc); + + This performs some validation checks on a parameter description. It + returns true if the description is good and false if it is not. It will + log errors to dmesg if validation fails. + + * :: + + int fs_parse(struct fs_context *fc, + const struct fs_parameter_description *desc, + struct fs_parameter *param, + struct fs_parse_result *result); + + This is the main interpreter of parameters. It uses the parameter + description to look up a parameter by key name and to convert that to an + option number (which it returns). + + If successful, and if the parameter type indicates the result is a + boolean, integer or enum type, the value is converted by this function and + the result stored in result->{boolean,int_32,uint_32,uint_64}. + + If a match isn't initially made, the key is prefixed with "no" and no + value is present then an attempt will be made to look up the key with the + prefix removed. If this matches a parameter for which the type has flag + fs_param_neg_with_no set, then a match will be made and result->negated + will be set to true. + + If the parameter isn't matched, -ENOPARAM will be returned; if the + parameter is matched, but the value is erroneous, -EINVAL will be + returned; otherwise the parameter's option number will be returned. + + * :: + + int fs_lookup_param(struct fs_context *fc, + struct fs_parameter *value, + bool want_bdev, + struct path *_path); + + This takes a parameter that carries a string or filename type and attempts + to do a path lookup on it. If the parameter expects a blockdev, a check + is made that the inode actually represents one. + + Returns 0 if successful and ``*_path`` will be set; returns a negative + error code if not. diff --git a/Documentation/filesystems/nfs/exporting.rst b/Documentation/filesystems/nfs/exporting.rst new file mode 100644 index 000000000..33d588a01 --- /dev/null +++ b/Documentation/filesystems/nfs/exporting.rst @@ -0,0 +1,165 @@ +:orphan: + +Making Filesystems Exportable +============================= + +Overview +-------- + +All filesystem operations require a dentry (or two) as a starting +point. Local applications have a reference-counted hold on suitable +dentries via open file descriptors or cwd/root. However remote +applications that access a filesystem via a remote filesystem protocol +such as NFS may not be able to hold such a reference, and so need a +different way to refer to a particular dentry. As the alternative +form of reference needs to be stable across renames, truncates, and +server-reboot (among other things, though these tend to be the most +problematic), there is no simple answer like 'filename'. + +The mechanism discussed here allows each filesystem implementation to +specify how to generate an opaque (outside of the filesystem) byte +string for any dentry, and how to find an appropriate dentry for any +given opaque byte string. +This byte string will be called a "filehandle fragment" as it +corresponds to part of an NFS filehandle. + +A filesystem which supports the mapping between filehandle fragments +and dentries will be termed "exportable". + + + +Dcache Issues +------------- + +The dcache normally contains a proper prefix of any given filesystem +tree. This means that if any filesystem object is in the dcache, then +all of the ancestors of that filesystem object are also in the dcache. +As normal access is by filename this prefix is created naturally and +maintained easily (by each object maintaining a reference count on +its parent). + +However when objects are included into the dcache by interpreting a +filehandle fragment, there is no automatic creation of a path prefix +for the object. This leads to two related but distinct features of +the dcache that are not needed for normal filesystem access. + +1. The dcache must sometimes contain objects that are not part of the + proper prefix. i.e that are not connected to the root. +2. The dcache must be prepared for a newly found (via ->lookup) directory + to already have a (non-connected) dentry, and must be able to move + that dentry into place (based on the parent and name in the + ->lookup). This is particularly needed for directories as + it is a dcache invariant that directories only have one dentry. + +To implement these features, the dcache has: + +a. A dentry flag DCACHE_DISCONNECTED which is set on + any dentry that might not be part of the proper prefix. + This is set when anonymous dentries are created, and cleared when a + dentry is noticed to be a child of a dentry which is in the proper + prefix. If the refcount on a dentry with this flag set + becomes zero, the dentry is immediately discarded, rather than being + kept in the dcache. If a dentry that is not already in the dcache + is repeatedly accessed by filehandle (as NFSD might do), an new dentry + will be a allocated for each access, and discarded at the end of + the access. + + Note that such a dentry can acquire children, name, ancestors, etc. + without losing DCACHE_DISCONNECTED - that flag is only cleared when + subtree is successfully reconnected to root. Until then dentries + in such subtree are retained only as long as there are references; + refcount reaching zero means immediate eviction, same as for unhashed + dentries. That guarantees that we won't need to hunt them down upon + umount. + +b. A primitive for creation of secondary roots - d_obtain_root(inode). + Those do _not_ bear DCACHE_DISCONNECTED. They are placed on the + per-superblock list (->s_roots), so they can be located at umount + time for eviction purposes. + +c. Helper routines to allocate anonymous dentries, and to help attach + loose directory dentries at lookup time. They are: + + d_obtain_alias(inode) will return a dentry for the given inode. + If the inode already has a dentry, one of those is returned. + + If it doesn't, a new anonymous (IS_ROOT and + DCACHE_DISCONNECTED) dentry is allocated and attached. + + In the case of a directory, care is taken that only one dentry + can ever be attached. + + d_splice_alias(inode, dentry) will introduce a new dentry into the tree; + either the passed-in dentry or a preexisting alias for the given inode + (such as an anonymous one created by d_obtain_alias), if appropriate. + It returns NULL when the passed-in dentry is used, following the calling + convention of ->lookup. + +Filesystem Issues +----------------- + +For a filesystem to be exportable it must: + + 1. provide the filehandle fragment routines described below. + 2. make sure that d_splice_alias is used rather than d_add + when ->lookup finds an inode for a given parent and name. + + If inode is NULL, d_splice_alias(inode, dentry) is equivalent to:: + + d_add(dentry, inode), NULL + + Similarly, d_splice_alias(ERR_PTR(err), dentry) = ERR_PTR(err) + + Typically the ->lookup routine will simply end with a:: + + return d_splice_alias(inode, dentry); + } + + + +A file system implementation declares that instances of the filesystem +are exportable by setting the s_export_op field in the struct +super_block. This field must point to a "struct export_operations" +struct which has the following members: + + encode_fh (optional) + Takes a dentry and creates a filehandle fragment which can later be used + to find or create a dentry for the same object. The default + implementation creates a filehandle fragment that encodes a 32bit inode + and generation number for the inode encoded, and if necessary the + same information for the parent. + + fh_to_dentry (mandatory) + Given a filehandle fragment, this should find the implied object and + create a dentry for it (possibly with d_obtain_alias). + + fh_to_parent (optional but strongly recommended) + Given a filehandle fragment, this should find the parent of the + implied object and create a dentry for it (possibly with + d_obtain_alias). May fail if the filehandle fragment is too small. + + get_parent (optional but strongly recommended) + When given a dentry for a directory, this should return a dentry for + the parent. Quite possibly the parent dentry will have been allocated + by d_alloc_anon. The default get_parent function just returns an error + so any filehandle lookup that requires finding a parent will fail. + ->lookup("..") is *not* used as a default as it can leave ".." entries + in the dcache which are too messy to work with. + + get_name (optional) + When given a parent dentry and a child dentry, this should find a name + in the directory identified by the parent dentry, which leads to the + object identified by the child dentry. If no get_name function is + supplied, a default implementation is provided which uses vfs_readdir + to find potential names, and matches inode numbers to find the correct + match. + + +A filehandle fragment consists of an array of 1 or more 4byte words, +together with a one byte "type". +The decode_fh routine should not depend on the stated size that is +passed to it. This size may be larger than the original filehandle +generated by encode_fh, in which case it will have been padded with +nuls. Rather, the encode_fh routine should choose a "type" which +indicates the decode_fh how much of the filehandle is valid, and how +it should be interpreted. diff --git a/Documentation/filesystems/nfs/index.rst b/Documentation/filesystems/nfs/index.rst new file mode 100644 index 000000000..65805624e --- /dev/null +++ b/Documentation/filesystems/nfs/index.rst @@ -0,0 +1,13 @@ +=============================== +NFS +=============================== + + +.. toctree:: + :maxdepth: 1 + + pnfs + rpc-cache + rpc-server-gss + nfs41-server + knfsd-stats diff --git a/Documentation/filesystems/nfs/knfsd-stats.rst b/Documentation/filesystems/nfs/knfsd-stats.rst new file mode 100644 index 000000000..80bcf1355 --- /dev/null +++ b/Documentation/filesystems/nfs/knfsd-stats.rst @@ -0,0 +1,122 @@ +============================ +Kernel NFS Server Statistics +============================ + +:Authors: Greg Banks <gnb@sgi.com> - 26 Mar 2009 + +This document describes the format and semantics of the statistics +which the kernel NFS server makes available to userspace. These +statistics are available in several text form pseudo files, each of +which is described separately below. + +In most cases you don't need to know these formats, as the nfsstat(8) +program from the nfs-utils distribution provides a helpful command-line +interface for extracting and printing them. + +All the files described here are formatted as a sequence of text lines, +separated by newline '\n' characters. Lines beginning with a hash +'#' character are comments intended for humans and should be ignored +by parsing routines. All other lines contain a sequence of fields +separated by whitespace. + +/proc/fs/nfsd/pool_stats +======================== + +This file is available in kernels from 2.6.30 onwards, if the +/proc/fs/nfsd filesystem is mounted (it almost always should be). + +The first line is a comment which describes the fields present in +all the other lines. The other lines present the following data as +a sequence of unsigned decimal numeric fields. One line is shown +for each NFS thread pool. + +All counters are 64 bits wide and wrap naturally. There is no way +to zero these counters, instead applications should do their own +rate conversion. + +pool + The id number of the NFS thread pool to which this line applies. + This number does not change. + + Thread pool ids are a contiguous set of small integers starting + at zero. The maximum value depends on the thread pool mode, but + currently cannot be larger than the number of CPUs in the system. + Note that in the default case there will be a single thread pool + which contains all the nfsd threads and all the CPUs in the system, + and thus this file will have a single line with a pool id of "0". + +packets-arrived + Counts how many NFS packets have arrived. More precisely, this + is the number of times that the network stack has notified the + sunrpc server layer that new data may be available on a transport + (e.g. an NFS or UDP socket or an NFS/RDMA endpoint). + + Depending on the NFS workload patterns and various network stack + effects (such as Large Receive Offload) which can combine packets + on the wire, this may be either more or less than the number + of NFS calls received (which statistic is available elsewhere). + However this is a more accurate and less workload-dependent measure + of how much CPU load is being placed on the sunrpc server layer + due to NFS network traffic. + +sockets-enqueued + Counts how many times an NFS transport is enqueued to wait for + an nfsd thread to service it, i.e. no nfsd thread was considered + available. + + The circumstance this statistic tracks indicates that there was NFS + network-facing work to be done but it couldn't be done immediately, + thus introducing a small delay in servicing NFS calls. The ideal + rate of change for this counter is zero; significantly non-zero + values may indicate a performance limitation. + + This can happen because there are too few nfsd threads in the thread + pool for the NFS workload (the workload is thread-limited), in which + case configuring more nfsd threads will probably improve the + performance of the NFS workload. + +threads-woken + Counts how many times an idle nfsd thread is woken to try to + receive some data from an NFS transport. + + This statistic tracks the circumstance where incoming + network-facing NFS work is being handled quickly, which is a good + thing. The ideal rate of change for this counter will be close + to but less than the rate of change of the packets-arrived counter. + +threads-timedout + Counts how many times an nfsd thread triggered an idle timeout, + i.e. was not woken to handle any incoming network packets for + some time. + + This statistic counts a circumstance where there are more nfsd + threads configured than can be used by the NFS workload. This is + a clue that the number of nfsd threads can be reduced without + affecting performance. Unfortunately, it's only a clue and not + a strong indication, for a couple of reasons: + + - Currently the rate at which the counter is incremented is quite + slow; the idle timeout is 60 minutes. Unless the NFS workload + remains constant for hours at a time, this counter is unlikely + to be providing information that is still useful. + + - It is usually a wise policy to provide some slack, + i.e. configure a few more nfsds than are currently needed, + to allow for future spikes in load. + + +Note that incoming packets on NFS transports will be dealt with in +one of three ways. An nfsd thread can be woken (threads-woken counts +this case), or the transport can be enqueued for later attention +(sockets-enqueued counts this case), or the packet can be temporarily +deferred because the transport is currently being used by an nfsd +thread. This last case is not very interesting and is not explicitly +counted, but can be inferred from the other counters thus:: + + packets-deferred = packets-arrived - ( sockets-enqueued + threads-woken ) + + +More +==== + +Descriptions of the other statistics file should go here. diff --git a/Documentation/filesystems/nfs/nfs41-server.rst b/Documentation/filesystems/nfs/nfs41-server.rst new file mode 100644 index 000000000..16b5f02f8 --- /dev/null +++ b/Documentation/filesystems/nfs/nfs41-server.rst @@ -0,0 +1,256 @@ +============================= +NFSv4.1 Server Implementation +============================= + +Server support for minorversion 1 can be controlled using the +/proc/fs/nfsd/versions control file. The string output returned +by reading this file will contain either "+4.1" or "-4.1" +correspondingly. + +Currently, server support for minorversion 1 is enabled by default. +It can be disabled at run time by writing the string "-4.1" to +the /proc/fs/nfsd/versions control file. Note that to write this +control file, the nfsd service must be taken down. You can use rpc.nfsd +for this; see rpc.nfsd(8). + +(Warning: older servers will interpret "+4.1" and "-4.1" as "+4" and +"-4", respectively. Therefore, code meant to work on both new and old +kernels must turn 4.1 on or off *before* turning support for version 4 +on or off; rpc.nfsd does this correctly.) + +The NFSv4 minorversion 1 (NFSv4.1) implementation in nfsd is based +on RFC 5661. + +From the many new features in NFSv4.1 the current implementation +focuses on the mandatory-to-implement NFSv4.1 Sessions, providing +"exactly once" semantics and better control and throttling of the +resources allocated for each client. + +The table below, taken from the NFSv4.1 document, lists +the operations that are mandatory to implement (REQ), optional +(OPT), and NFSv4.0 operations that are required not to implement (MNI) +in minor version 1. The first column indicates the operations that +are not supported yet by the linux server implementation. + +The OPTIONAL features identified and their abbreviations are as follows: + +- **pNFS** Parallel NFS +- **FDELG** File Delegations +- **DDELG** Directory Delegations + +The following abbreviations indicate the linux server implementation status. + +- **I** Implemented NFSv4.1 operations. +- **NS** Not Supported. +- **NS\*** Unimplemented optional feature. + +Operations +========== + ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| Implementation status | Operation | REQ,REC, OPT or NMI | Feature (REQ, REC or OPT) | Definition | ++=======================+======================+=====================+===========================+================+ +| | ACCESS | REQ | | Section 18.1 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| I | BACKCHANNEL_CTL | REQ | | Section 18.33 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| I | BIND_CONN_TO_SESSION | REQ | | Section 18.34 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | CLOSE | REQ | | Section 18.2 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | COMMIT | REQ | | Section 18.3 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | CREATE | REQ | | Section 18.4 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| I | CREATE_SESSION | REQ | | Section 18.36 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| NS* | DELEGPURGE | OPT | FDELG (REQ) | Section 18.5 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | DELEGRETURN | OPT | FDELG, | Section 18.6 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | | | DDELG, pNFS | | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | | | (REQ) | | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| I | DESTROY_CLIENTID | REQ | | Section 18.50 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| I | DESTROY_SESSION | REQ | | Section 18.37 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| I | EXCHANGE_ID | REQ | | Section 18.35 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| I | FREE_STATEID | REQ | | Section 18.38 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | GETATTR | REQ | | Section 18.7 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| I | GETDEVICEINFO | OPT | pNFS (REQ) | Section 18.40 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| NS* | GETDEVICELIST | OPT | pNFS (OPT) | Section 18.41 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | GETFH | REQ | | Section 18.8 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| NS* | GET_DIR_DELEGATION | OPT | DDELG (REQ) | Section 18.39 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| I | LAYOUTCOMMIT | OPT | pNFS (REQ) | Section 18.42 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| I | LAYOUTGET | OPT | pNFS (REQ) | Section 18.43 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| I | LAYOUTRETURN | OPT | pNFS (REQ) | Section 18.44 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | LINK | OPT | | Section 18.9 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | LOCK | REQ | | Section 18.10 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | LOCKT | REQ | | Section 18.11 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | LOCKU | REQ | | Section 18.12 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | LOOKUP | REQ | | Section 18.13 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | LOOKUPP | REQ | | Section 18.14 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | NVERIFY | REQ | | Section 18.15 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | OPEN | REQ | | Section 18.16 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| NS* | OPENATTR | OPT | | Section 18.17 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | OPEN_CONFIRM | MNI | | N/A | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | OPEN_DOWNGRADE | REQ | | Section 18.18 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | PUTFH | REQ | | Section 18.19 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | PUTPUBFH | REQ | | Section 18.20 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | PUTROOTFH | REQ | | Section 18.21 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | READ | REQ | | Section 18.22 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | READDIR | REQ | | Section 18.23 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | READLINK | OPT | | Section 18.24 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | RECLAIM_COMPLETE | REQ | | Section 18.51 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | RELEASE_LOCKOWNER | MNI | | N/A | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | REMOVE | REQ | | Section 18.25 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | RENAME | REQ | | Section 18.26 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | RENEW | MNI | | N/A | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | RESTOREFH | REQ | | Section 18.27 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | SAVEFH | REQ | | Section 18.28 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | SECINFO | REQ | | Section 18.29 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| I | SECINFO_NO_NAME | REC | pNFS files | Section 18.45, | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | | | layout (REQ) | Section 13.12 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| I | SEQUENCE | REQ | | Section 18.46 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | SETATTR | REQ | | Section 18.30 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | SETCLIENTID | MNI | | N/A | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | SETCLIENTID_CONFIRM | MNI | | N/A | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| NS | SET_SSV | REQ | | Section 18.47 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| I | TEST_STATEID | REQ | | Section 18.48 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | VERIFY | REQ | | Section 18.31 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| NS* | WANT_DELEGATION | OPT | FDELG (OPT) | Section 18.49 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ +| | WRITE | REQ | | Section 18.32 | ++-----------------------+----------------------+---------------------+---------------------------+----------------+ + + +Callback Operations +=================== ++-----------------------+-------------------------+---------------------+---------------------------+---------------+ +| Implementation status | Operation | REQ,REC, OPT or NMI | Feature (REQ, REC or OPT) | Definition | ++=======================+=========================+=====================+===========================+===============+ +| | CB_GETATTR | OPT | FDELG (REQ) | Section 20.1 | ++-----------------------+-------------------------+---------------------+---------------------------+---------------+ +| I | CB_LAYOUTRECALL | OPT | pNFS (REQ) | Section 20.3 | ++-----------------------+-------------------------+---------------------+---------------------------+---------------+ +| NS* | CB_NOTIFY | OPT | DDELG (REQ) | Section 20.4 | ++-----------------------+-------------------------+---------------------+---------------------------+---------------+ +| NS* | CB_NOTIFY_DEVICEID | OPT | pNFS (OPT) | Section 20.12 | ++-----------------------+-------------------------+---------------------+---------------------------+---------------+ +| NS* | CB_NOTIFY_LOCK | OPT | | Section 20.11 | ++-----------------------+-------------------------+---------------------+---------------------------+---------------+ +| NS* | CB_PUSH_DELEG | OPT | FDELG (OPT) | Section 20.5 | ++-----------------------+-------------------------+---------------------+---------------------------+---------------+ +| | CB_RECALL | OPT | FDELG, | Section 20.2 | ++-----------------------+-------------------------+---------------------+---------------------------+---------------+ +| | | | DDELG, pNFS | | ++-----------------------+-------------------------+---------------------+---------------------------+---------------+ +| | | | (REQ) | | ++-----------------------+-------------------------+---------------------+---------------------------+---------------+ +| NS* | CB_RECALL_ANY | OPT | FDELG, | Section 20.6 | ++-----------------------+-------------------------+---------------------+---------------------------+---------------+ +| | | | DDELG, pNFS | | ++-----------------------+-------------------------+---------------------+---------------------------+---------------+ +| | | | (REQ) | | ++-----------------------+-------------------------+---------------------+---------------------------+---------------+ +| NS | CB_RECALL_SLOT | REQ | | Section 20.8 | ++-----------------------+-------------------------+---------------------+---------------------------+---------------+ +| NS* | CB_RECALLABLE_OBJ_AVAIL | OPT | DDELG, pNFS | Section 20.7 | ++-----------------------+-------------------------+---------------------+---------------------------+---------------+ +| | | | (REQ) | | ++-----------------------+-------------------------+---------------------+---------------------------+---------------+ +| I | CB_SEQUENCE | OPT | FDELG, | Section 20.9 | ++-----------------------+-------------------------+---------------------+---------------------------+---------------+ +| | | | DDELG, pNFS | | ++-----------------------+-------------------------+---------------------+---------------------------+---------------+ +| | | | (REQ) | | ++-----------------------+-------------------------+---------------------+---------------------------+---------------+ +| NS* | CB_WANTS_CANCELLED | OPT | FDELG, | Section 20.10 | ++-----------------------+-------------------------+---------------------+---------------------------+---------------+ +| | | | DDELG, pNFS | | ++-----------------------+-------------------------+---------------------+---------------------------+---------------+ +| | | | (REQ) | | ++-----------------------+-------------------------+---------------------+---------------------------+---------------+ + + +Implementation notes: +===================== + +SSV: + The spec claims this is mandatory, but we don't actually know of any + implementations, so we're ignoring it for now. The server returns + NFS4ERR_ENCR_ALG_UNSUPP on EXCHANGE_ID, which should be future-proof. + +GSS on the backchannel: + Again, theoretically required but not widely implemented (in + particular, the current Linux client doesn't request it). We return + NFS4ERR_ENCR_ALG_UNSUPP on CREATE_SESSION. + +DELEGPURGE: + mandatory only for servers that support CLAIM_DELEGATE_PREV and/or + CLAIM_DELEG_PREV_FH (which allows clients to keep delegations that + persist across client reboots). Thus we need not implement this for + now. + +EXCHANGE_ID: + implementation ids are ignored + +CREATE_SESSION: + backchannel attributes are ignored + +SEQUENCE: + no support for dynamic slot table renegotiation (optional) + +Nonstandard compound limitations: + No support for a sessions fore channel RPC compound that requires both a + ca_maxrequestsize request and a ca_maxresponsesize reply, so we may + fail to live up to the promise we made in CREATE_SESSION fore channel + negotiation. + +See also http://wiki.linux-nfs.org/wiki/index.php/Server_4.0_and_4.1_issues. diff --git a/Documentation/filesystems/nfs/pnfs.rst b/Documentation/filesystems/nfs/pnfs.rst new file mode 100644 index 000000000..7c470ecdc --- /dev/null +++ b/Documentation/filesystems/nfs/pnfs.rst @@ -0,0 +1,78 @@ +========================== +Reference counting in pnfs +========================== + +The are several inter-related caches. We have layouts which can +reference multiple devices, each of which can reference multiple data servers. +Each data server can be referenced by multiple devices. Each device +can be referenced by multiple layouts. To keep all of this straight, +we need to reference count. + + +struct pnfs_layout_hdr +====================== + +The on-the-wire command LAYOUTGET corresponds to struct +pnfs_layout_segment, usually referred to by the variable name lseg. +Each nfs_inode may hold a pointer to a cache of these layout +segments in nfsi->layout, of type struct pnfs_layout_hdr. + +We reference the header for the inode pointing to it, across each +outstanding RPC call that references it (LAYOUTGET, LAYOUTRETURN, +LAYOUTCOMMIT), and for each lseg held within. + +Each header is also (when non-empty) put on a list associated with +struct nfs_client (cl_layouts). Being put on this list does not bump +the reference count, as the layout is kept around by the lseg that +keeps it in the list. + +deviceid_cache +============== + +lsegs reference device ids, which are resolved per nfs_client and +layout driver type. The device ids are held in a RCU cache (struct +nfs4_deviceid_cache). The cache itself is referenced across each +mount. The entries (struct nfs4_deviceid) themselves are held across +the lifetime of each lseg referencing them. + +RCU is used because the deviceid is basically a write once, read many +data structure. The hlist size of 32 buckets needs better +justification, but seems reasonable given that we can have multiple +deviceid's per filesystem, and multiple filesystems per nfs_client. + +The hash code is copied from the nfsd code base. A discussion of +hashing and variations of this algorithm can be found `here. +<http://groups.google.com/group/comp.lang.c/browse_thread/thread/9522965e2b8d3809>`_ + +data server cache +================= + +file driver devices refer to data servers, which are kept in a module +level cache. Its reference is held over the lifetime of the deviceid +pointing to it. + +lseg +==== + +lseg maintains an extra reference corresponding to the NFS_LSEG_VALID +bit which holds it in the pnfs_layout_hdr's list. When the final lseg +is removed from the pnfs_layout_hdr's list, the NFS_LAYOUT_DESTROYED +bit is set, preventing any new lsegs from being added. + +layout drivers +============== + +PNFS utilizes what is called layout drivers. The STD defines 4 basic +layout types: "files", "objects", "blocks", and "flexfiles". For each +of these types there is a layout-driver with a common function-vectors +table which are called by the nfs-client pnfs-core to implement the +different layout types. + +Files-layout-driver code is in: fs/nfs/filelayout/.. directory +Blocks-layout-driver code is in: fs/nfs/blocklayout/.. directory +Flexfiles-layout-driver code is in: fs/nfs/flexfilelayout/.. directory + +blocks-layout setup +=================== + +TODO: Document the setup needs of the blocks layout driver diff --git a/Documentation/filesystems/nfs/rpc-cache.rst b/Documentation/filesystems/nfs/rpc-cache.rst new file mode 100644 index 000000000..bb164eea9 --- /dev/null +++ b/Documentation/filesystems/nfs/rpc-cache.rst @@ -0,0 +1,220 @@ +========= +RPC Cache +========= + +This document gives a brief introduction to the caching +mechanisms in the sunrpc layer that is used, in particular, +for NFS authentication. + +Caches +====== + +The caching replaces the old exports table and allows for +a wide variety of values to be caches. + +There are a number of caches that are similar in structure though +quite possibly very different in content and use. There is a corpus +of common code for managing these caches. + +Examples of caches that are likely to be needed are: + + - mapping from IP address to client name + - mapping from client name and filesystem to export options + - mapping from UID to list of GIDs, to work around NFS's limitation + of 16 gids. + - mappings between local UID/GID and remote UID/GID for sites that + do not have uniform uid assignment + - mapping from network identify to public key for crypto authentication. + +The common code handles such things as: + + - general cache lookup with correct locking + - supporting 'NEGATIVE' as well as positive entries + - allowing an EXPIRED time on cache items, and removing + items after they expire, and are no longer in-use. + - making requests to user-space to fill in cache entries + - allowing user-space to directly set entries in the cache + - delaying RPC requests that depend on as-yet incomplete + cache entries, and replaying those requests when the cache entry + is complete. + - clean out old entries as they expire. + +Creating a Cache +---------------- + +- A cache needs a datum to store. This is in the form of a + structure definition that must contain a struct cache_head + as an element, usually the first. + It will also contain a key and some content. + Each cache element is reference counted and contains + expiry and update times for use in cache management. +- A cache needs a "cache_detail" structure that + describes the cache. This stores the hash table, some + parameters for cache management, and some operations detailing how + to work with particular cache items. + + The operations are: + + struct cache_head \*alloc(void) + This simply allocates appropriate memory and returns + a pointer to the cache_detail embedded within the + structure + + void cache_put(struct kref \*) + This is called when the last reference to an item is + dropped. The pointer passed is to the 'ref' field + in the cache_head. cache_put should release any + references create by 'cache_init' and, if CACHE_VALID + is set, any references created by cache_update. + It should then release the memory allocated by + 'alloc'. + + int match(struct cache_head \*orig, struct cache_head \*new) + test if the keys in the two structures match. Return + 1 if they do, 0 if they don't. + + void init(struct cache_head \*orig, struct cache_head \*new) + Set the 'key' fields in 'new' from 'orig'. This may + include taking references to shared objects. + + void update(struct cache_head \*orig, struct cache_head \*new) + Set the 'content' fileds in 'new' from 'orig'. + + int cache_show(struct seq_file \*m, struct cache_detail \*cd, struct cache_head \*h) + Optional. Used to provide a /proc file that lists the + contents of a cache. This should show one item, + usually on just one line. + + int cache_request(struct cache_detail \*cd, struct cache_head \*h, char \*\*bpp, int \*blen) + Format a request to be send to user-space for an item + to be instantiated. \*bpp is a buffer of size \*blen. + bpp should be moved forward over the encoded message, + and \*blen should be reduced to show how much free + space remains. Return 0 on success or <0 if not + enough room or other problem. + + int cache_parse(struct cache_detail \*cd, char \*buf, int len) + A message from user space has arrived to fill out a + cache entry. It is in 'buf' of length 'len'. + cache_parse should parse this, find the item in the + cache with sunrpc_cache_lookup_rcu, and update the item + with sunrpc_cache_update. + + +- A cache needs to be registered using cache_register(). This + includes it on a list of caches that will be regularly + cleaned to discard old data. + +Using a cache +------------- + +To find a value in a cache, call sunrpc_cache_lookup_rcu passing a pointer +to the cache_head in a sample item with the 'key' fields filled in. +This will be passed to ->match to identify the target entry. If no +entry is found, a new entry will be create, added to the cache, and +marked as not containing valid data. + +The item returned is typically passed to cache_check which will check +if the data is valid, and may initiate an up-call to get fresh data. +cache_check will return -ENOENT in the entry is negative or if an up +call is needed but not possible, -EAGAIN if an upcall is pending, +or 0 if the data is valid; + +cache_check can be passed a "struct cache_req\*". This structure is +typically embedded in the actual request and can be used to create a +deferred copy of the request (struct cache_deferred_req). This is +done when the found cache item is not uptodate, but the is reason to +believe that userspace might provide information soon. When the cache +item does become valid, the deferred copy of the request will be +revisited (->revisit). It is expected that this method will +reschedule the request for processing. + +The value returned by sunrpc_cache_lookup_rcu can also be passed to +sunrpc_cache_update to set the content for the item. A second item is +passed which should hold the content. If the item found by _lookup +has valid data, then it is discarded and a new item is created. This +saves any user of an item from worrying about content changing while +it is being inspected. If the item found by _lookup does not contain +valid data, then the content is copied across and CACHE_VALID is set. + +Populating a cache +------------------ + +Each cache has a name, and when the cache is registered, a directory +with that name is created in /proc/net/rpc + +This directory contains a file called 'channel' which is a channel +for communicating between kernel and user for populating the cache. +This directory may later contain other files of interacting +with the cache. + +The 'channel' works a bit like a datagram socket. Each 'write' is +passed as a whole to the cache for parsing and interpretation. +Each cache can treat the write requests differently, but it is +expected that a message written will contain: + + - a key + - an expiry time + - a content. + +with the intention that an item in the cache with the give key +should be create or updated to have the given content, and the +expiry time should be set on that item. + +Reading from a channel is a bit more interesting. When a cache +lookup fails, or when it succeeds but finds an entry that may soon +expire, a request is lodged for that cache item to be updated by +user-space. These requests appear in the channel file. + +Successive reads will return successive requests. +If there are no more requests to return, read will return EOF, but a +select or poll for read will block waiting for another request to be +added. + +Thus a user-space helper is likely to:: + + open the channel. + select for readable + read a request + write a response + loop. + +If it dies and needs to be restarted, any requests that have not been +answered will still appear in the file and will be read by the new +instance of the helper. + +Each cache should define a "cache_parse" method which takes a message +written from user-space and processes it. It should return an error +(which propagates back to the write syscall) or 0. + +Each cache should also define a "cache_request" method which +takes a cache item and encodes a request into the buffer +provided. + +.. note:: + If a cache has no active readers on the channel, and has had not + active readers for more than 60 seconds, further requests will not be + added to the channel but instead all lookups that do not find a valid + entry will fail. This is partly for backward compatibility: The + previous nfs exports table was deemed to be authoritative and a + failed lookup meant a definite 'no'. + +request/response format +----------------------- + +While each cache is free to use its own format for requests +and responses over channel, the following is recommended as +appropriate and support routines are available to help: +Each request or response record should be printable ASCII +with precisely one newline character which should be at the end. +Fields within the record should be separated by spaces, normally one. +If spaces, newlines, or nul characters are needed in a field they +much be quoted. two mechanisms are available: + +- If a field begins '\x' then it must contain an even number of + hex digits, and pairs of these digits provide the bytes in the + field. +- otherwise a \ in the field must be followed by 3 octal digits + which give the code for a byte. Other characters are treated + as them selves. At the very least, space, newline, nul, and + '\' must be quoted in this way. diff --git a/Documentation/filesystems/nfs/rpc-server-gss.rst b/Documentation/filesystems/nfs/rpc-server-gss.rst new file mode 100644 index 000000000..ccaea9e7c --- /dev/null +++ b/Documentation/filesystems/nfs/rpc-server-gss.rst @@ -0,0 +1,93 @@ +========================================= +rpcsec_gss support for kernel RPC servers +========================================= + +This document gives references to the standards and protocols used to +implement RPCGSS authentication in kernel RPC servers such as the NFS +server and the NFS client's NFSv4.0 callback server. (But note that +NFSv4.1 and higher don't require the client to act as a server for the +purposes of authentication.) + +RPCGSS is specified in a few IETF documents: + + - RFC2203 v1: https://tools.ietf.org/rfc/rfc2203.txt + - RFC5403 v2: https://tools.ietf.org/rfc/rfc5403.txt + +There is a third version that we don't currently implement: + + - RFC7861 v3: https://tools.ietf.org/rfc/rfc7861.txt + +Background +========== + +The RPCGSS Authentication method describes a way to perform GSSAPI +Authentication for NFS. Although GSSAPI is itself completely mechanism +agnostic, in many cases only the KRB5 mechanism is supported by NFS +implementations. + +The Linux kernel, at the moment, supports only the KRB5 mechanism, and +depends on GSSAPI extensions that are KRB5 specific. + +GSSAPI is a complex library, and implementing it completely in kernel is +unwarranted. However GSSAPI operations are fundementally separable in 2 +parts: + +- initial context establishment +- integrity/privacy protection (signing and encrypting of individual + packets) + +The former is more complex and policy-independent, but less +performance-sensitive. The latter is simpler and needs to be very fast. + +Therefore, we perform per-packet integrity and privacy protection in the +kernel, but leave the initial context establishment to userspace. We +need upcalls to request userspace to perform context establishment. + +NFS Server Legacy Upcall Mechanism +================================== + +The classic upcall mechanism uses a custom text based upcall mechanism +to talk to a custom daemon called rpc.svcgssd that is provide by the +nfs-utils package. + +This upcall mechanism has 2 limitations: + +A) It can handle tokens that are no bigger than 2KiB + +In some Kerberos deployment GSSAPI tokens can be quite big, up and +beyond 64KiB in size due to various authorization extensions attacked to +the Kerberos tickets, that needs to be sent through the GSS layer in +order to perform context establishment. + +B) It does not properly handle creds where the user is member of more +than a few thousand groups (the current hard limit in the kernel is 65K +groups) due to limitation on the size of the buffer that can be send +back to the kernel (4KiB). + +NFS Server New RPC Upcall Mechanism +=================================== + +The newer upcall mechanism uses RPC over a unix socket to a daemon +called gss-proxy, implemented by a userspace program called Gssproxy. + +The gss_proxy RPC protocol is currently documented `here +<https://fedorahosted.org/gss-proxy/wiki/ProtocolDocumentation>`_. + +This upcall mechanism uses the kernel rpc client and connects to the gssproxy +userspace program over a regular unix socket. The gssproxy protocol does not +suffer from the size limitations of the legacy protocol. + +Negotiating Upcall Mechanisms +============================= + +To provide backward compatibility, the kernel defaults to using the +legacy mechanism. To switch to the new mechanism, gss-proxy must bind +to /var/run/gssproxy.sock and then write "1" to +/proc/net/rpc/use-gss-proxy. If gss-proxy dies, it must repeat both +steps. + +Once the upcall mechanism is chosen, it cannot be changed. To prevent +locking into the legacy mechanisms, the above steps must be performed +before starting nfsd. Whoever starts nfsd can guarantee this by reading +from /proc/net/rpc/use-gss-proxy and checking that it contains a +"1"--the read will block until gss-proxy has done its write to the file. diff --git a/Documentation/filesystems/nilfs2.rst b/Documentation/filesystems/nilfs2.rst new file mode 100644 index 000000000..6c49f04e9 --- /dev/null +++ b/Documentation/filesystems/nilfs2.rst @@ -0,0 +1,286 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====== +NILFS2 +====== + +NILFS2 is a log-structured file system (LFS) supporting continuous +snapshotting. In addition to versioning capability of the entire file +system, users can even restore files mistakenly overwritten or +destroyed just a few seconds ago. Since NILFS2 can keep consistency +like conventional LFS, it achieves quick recovery after system +crashes. + +NILFS2 creates a number of checkpoints every few seconds or per +synchronous write basis (unless there is no change). Users can select +significant versions among continuously created checkpoints, and can +change them into snapshots which will be preserved until they are +changed back to checkpoints. + +There is no limit on the number of snapshots until the volume gets +full. Each snapshot is mountable as a read-only file system +concurrently with its writable mount, and this feature is convenient +for online backup. + +The userland tools are included in nilfs-utils package, which is +available from the following download page. At least "mkfs.nilfs2", +"mount.nilfs2", "umount.nilfs2", and "nilfs_cleanerd" (so called +cleaner or garbage collector) are required. Details on the tools are +described in the man pages included in the package. + +:Project web page: https://nilfs.sourceforge.io/ +:Download page: https://nilfs.sourceforge.io/en/download.html +:List info: http://vger.kernel.org/vger-lists.html#linux-nilfs + +Caveats +======= + +Features which NILFS2 does not support yet: + + - atime + - extended attributes + - POSIX ACLs + - quotas + - fsck + - defragmentation + +Mount options +============= + +NILFS2 supports the following mount options: +(*) == default + +======================= ======================================================= +barrier(*) This enables/disables the use of write barriers. This +nobarrier requires an IO stack which can support barriers, and + if nilfs gets an error on a barrier write, it will + disable again with a warning. +errors=continue Keep going on a filesystem error. +errors=remount-ro(*) Remount the filesystem read-only on an error. +errors=panic Panic and halt the machine if an error occurs. +cp=n Specify the checkpoint-number of the snapshot to be + mounted. Checkpoints and snapshots are listed by lscp + user command. Only the checkpoints marked as snapshot + are mountable with this option. Snapshot is read-only, + so a read-only mount option must be specified together. +order=relaxed(*) Apply relaxed order semantics that allows modified data + blocks to be written to disk without making a + checkpoint if no metadata update is going. This mode + is equivalent to the ordered data mode of the ext3 + filesystem except for the updates on data blocks still + conserve atomicity. This will improve synchronous + write performance for overwriting. +order=strict Apply strict in-order semantics that preserves sequence + of all file operations including overwriting of data + blocks. That means, it is guaranteed that no + overtaking of events occurs in the recovered file + system after a crash. +norecovery Disable recovery of the filesystem on mount. + This disables every write access on the device for + read-only mounts or snapshots. This option will fail + for r/w mounts on an unclean volume. +discard This enables/disables the use of discard/TRIM commands. +nodiscard(*) The discard/TRIM commands are sent to the underlying + block device when blocks are freed. This is useful + for SSD devices and sparse/thinly-provisioned LUNs. +======================= ======================================================= + +Ioctls +====== + +There is some NILFS2 specific functionality which can be accessed by applications +through the system call interfaces. The list of all NILFS2 specific ioctls are +shown in the table below. + +Table of NILFS2 specific ioctls: + + ============================== =============================================== + Ioctl Description + ============================== =============================================== + NILFS_IOCTL_CHANGE_CPMODE Change mode of given checkpoint between + checkpoint and snapshot state. This ioctl is + used in chcp and mkcp utilities. + + NILFS_IOCTL_DELETE_CHECKPOINT Remove checkpoint from NILFS2 file system. + This ioctl is used in rmcp utility. + + NILFS_IOCTL_GET_CPINFO Return info about requested checkpoints. This + ioctl is used in lscp utility and by + nilfs_cleanerd daemon. + + NILFS_IOCTL_GET_CPSTAT Return checkpoints statistics. This ioctl is + used by lscp, rmcp utilities and by + nilfs_cleanerd daemon. + + NILFS_IOCTL_GET_SUINFO Return segment usage info about requested + segments. This ioctl is used in lssu, + nilfs_resize utilities and by nilfs_cleanerd + daemon. + + NILFS_IOCTL_SET_SUINFO Modify segment usage info of requested + segments. This ioctl is used by + nilfs_cleanerd daemon to skip unnecessary + cleaning operation of segments and reduce + performance penalty or wear of flash device + due to redundant move of in-use blocks. + + NILFS_IOCTL_GET_SUSTAT Return segment usage statistics. This ioctl + is used in lssu, nilfs_resize utilities and + by nilfs_cleanerd daemon. + + NILFS_IOCTL_GET_VINFO Return information on virtual block addresses. + This ioctl is used by nilfs_cleanerd daemon. + + NILFS_IOCTL_GET_BDESCS Return information about descriptors of disk + block numbers. This ioctl is used by + nilfs_cleanerd daemon. + + NILFS_IOCTL_CLEAN_SEGMENTS Do garbage collection operation in the + environment of requested parameters from + userspace. This ioctl is used by + nilfs_cleanerd daemon. + + NILFS_IOCTL_SYNC Make a checkpoint. This ioctl is used in + mkcp utility. + + NILFS_IOCTL_RESIZE Resize NILFS2 volume. This ioctl is used + by nilfs_resize utility. + + NILFS_IOCTL_SET_ALLOC_RANGE Define lower limit of segments in bytes and + upper limit of segments in bytes. This ioctl + is used by nilfs_resize utility. + ============================== =============================================== + +NILFS2 usage +============ + +To use nilfs2 as a local file system, simply:: + + # mkfs -t nilfs2 /dev/block_device + # mount -t nilfs2 /dev/block_device /dir + +This will also invoke the cleaner through the mount helper program +(mount.nilfs2). + +Checkpoints and snapshots are managed by the following commands. +Their manpages are included in the nilfs-utils package above. + + ==== =========================================================== + lscp list checkpoints or snapshots. + mkcp make a checkpoint or a snapshot. + chcp change an existing checkpoint to a snapshot or vice versa. + rmcp invalidate specified checkpoint(s). + ==== =========================================================== + +To mount a snapshot:: + + # mount -t nilfs2 -r -o cp=<cno> /dev/block_device /snap_dir + +where <cno> is the checkpoint number of the snapshot. + +To unmount the NILFS2 mount point or snapshot, simply:: + + # umount /dir + +Then, the cleaner daemon is automatically shut down by the umount +helper program (umount.nilfs2). + +Disk format +=========== + +A nilfs2 volume is equally divided into a number of segments except +for the super block (SB) and segment #0. A segment is the container +of logs. Each log is composed of summary information blocks, payload +blocks, and an optional super root block (SR):: + + ______________________________________________________ + | |SB| | Segment | Segment | Segment | ... | Segment | | + |_|__|_|____0____|____1____|____2____|_____|____N____|_| + 0 +1K +4K +8M +16M +24M +(8MB x N) + . . (Typical offsets for 4KB-block) + . . + .______________________. + | log | log |... | log | + |__1__|__2__|____|__m__| + . . + . . + . . + .______________________________. + | Summary | Payload blocks |SR| + |_blocks__|_________________|__| + +The payload blocks are organized per file, and each file consists of +data blocks and B-tree node blocks:: + + |<--- File-A --->|<--- File-B --->| + _______________________________________________________________ + | Data blocks | B-tree blocks | Data blocks | B-tree blocks | ... + _|_____________|_______________|_____________|_______________|_ + + +Since only the modified blocks are written in the log, it may have +files without data blocks or B-tree node blocks. + +The organization of the blocks is recorded in the summary information +blocks, which contains a header structure (nilfs_segment_summary), per +file structures (nilfs_finfo), and per block structures (nilfs_binfo):: + + _________________________________________________________________________ + | Summary | finfo | binfo | ... | binfo | finfo | binfo | ... | binfo |... + |_blocks__|___A___|_(A,1)_|_____|(A,Na)_|___B___|_(B,1)_|_____|(B,Nb)_|___ + + +The logs include regular files, directory files, symbolic link files +and several meta data files. The mata data files are the files used +to maintain file system meta data. The current version of NILFS2 uses +the following meta data files:: + + 1) Inode file (ifile) -- Stores on-disk inodes + 2) Checkpoint file (cpfile) -- Stores checkpoints + 3) Segment usage file (sufile) -- Stores allocation state of segments + 4) Data address translation file -- Maps virtual block numbers to usual + (DAT) block numbers. This file serves to + make on-disk blocks relocatable. + +The following figure shows a typical organization of the logs:: + + _________________________________________________________________________ + | Summary | regular file | file | ... | ifile | cpfile | sufile | DAT |SR| + |_blocks__|_or_directory_|_______|_____|_______|________|________|_____|__| + + +To stride over segment boundaries, this sequence of files may be split +into multiple logs. The sequence of logs that should be treated as +logically one log, is delimited with flags marked in the segment +summary. The recovery code of nilfs2 looks this boundary information +to ensure atomicity of updates. + +The super root block is inserted for every checkpoints. It includes +three special inodes, inodes for the DAT, cpfile, and sufile. Inodes +of regular files, directories, symlinks and other special files, are +included in the ifile. The inode of ifile itself is included in the +corresponding checkpoint entry in the cpfile. Thus, the hierarchy +among NILFS2 files can be depicted as follows:: + + Super block (SB) + | + v + Super root block (the latest cno=xx) + |-- DAT + |-- sufile + `-- cpfile + |-- ifile (cno=c1) + |-- ifile (cno=c2) ---- file (ino=i1) + : : |-- file (ino=i2) + `-- ifile (cno=xx) |-- file (ino=i3) + : : + `-- file (ino=yy) + ( regular file, directory, or symlink ) + +For detail on the format of each file, please see nilfs2_ondisk.h +located at include/uapi/linux directory. + +There are no patents or other intellectual property that we protect +with regard to the design of NILFS2. It is allowed to replicate the +design in hopes that other operating systems could share (mount, read, +write, etc.) data stored in this format. diff --git a/Documentation/filesystems/ntfs.rst b/Documentation/filesystems/ntfs.rst new file mode 100644 index 000000000..5bb093a26 --- /dev/null +++ b/Documentation/filesystems/ntfs.rst @@ -0,0 +1,466 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================================ +The Linux NTFS filesystem driver +================================ + + +.. Table of contents + + - Overview + - Web site + - Features + - Supported mount options + - Known bugs and (mis-)features + - Using NTFS volume and stripe sets + - The Device-Mapper driver + - The Software RAID / MD driver + - Limitations when using the MD driver + + +Overview +======== + +Linux-NTFS comes with a number of user-space programs known as ntfsprogs. +These include mkntfs, a full-featured ntfs filesystem format utility, +ntfsundelete used for recovering files that were unintentionally deleted +from an NTFS volume and ntfsresize which is used to resize an NTFS partition. +See the web site for more information. + +To mount an NTFS 1.2/3.x (Windows NT4/2000/XP/2003) volume, use the file +system type 'ntfs'. The driver currently supports read-only mode (with no +fault-tolerance, encryption or journalling) and very limited, but safe, write +support. + +For fault tolerance and raid support (i.e. volume and stripe sets), you can +use the kernel's Software RAID / MD driver. See section "Using Software RAID +with NTFS" for details. + + +Web site +======== + +There is plenty of additional information on the linux-ntfs web site +at http://www.linux-ntfs.org/ + +The web site has a lot of additional information, such as a comprehensive +FAQ, documentation on the NTFS on-disk format, information on the Linux-NTFS +userspace utilities, etc. + + +Features +======== + +- This is a complete rewrite of the NTFS driver that used to be in the 2.4 and + earlier kernels. This new driver implements NTFS read support and is + functionally equivalent to the old ntfs driver and it also implements limited + write support. The biggest limitation at present is that files/directories + cannot be created or deleted. See below for the list of write features that + are so far supported. Another limitation is that writing to compressed files + is not implemented at all. Also, neither read nor write access to encrypted + files is so far implemented. +- The new driver has full support for sparse files on NTFS 3.x volumes which + the old driver isn't happy with. +- The new driver supports execution of binaries due to mmap() now being + supported. +- The new driver supports loopback mounting of files on NTFS which is used by + some Linux distributions to enable the user to run Linux from an NTFS + partition by creating a large file while in Windows and then loopback + mounting the file while in Linux and creating a Linux filesystem on it that + is used to install Linux on it. +- A comparison of the two drivers using:: + + time find . -type f -exec md5sum "{}" \; + + run three times in sequence with each driver (after a reboot) on a 1.4GiB + NTFS partition, showed the new driver to be 20% faster in total time elapsed + (from 9:43 minutes on average down to 7:53). The time spent in user space + was unchanged but the time spent in the kernel was decreased by a factor of + 2.5 (from 85 CPU seconds down to 33). +- The driver does not support short file names in general. For backwards + compatibility, we implement access to files using their short file names if + they exist. The driver will not create short file names however, and a + rename will discard any existing short file name. +- The new driver supports exporting of mounted NTFS volumes via NFS. +- The new driver supports async io (aio). +- The new driver supports fsync(2), fdatasync(2), and msync(2). +- The new driver supports readv(2) and writev(2). +- The new driver supports access time updates (including mtime and ctime). +- The new driver supports truncate(2) and open(2) with O_TRUNC. But at present + only very limited support for highly fragmented files, i.e. ones which have + their data attribute split across multiple extents, is included. Another + limitation is that at present truncate(2) will never create sparse files, + since to mark a file sparse we need to modify the directory entry for the + file and we do not implement directory modifications yet. +- The new driver supports write(2) which can both overwrite existing data and + extend the file size so that you can write beyond the existing data. Also, + writing into sparse regions is supported and the holes are filled in with + clusters. But at present only limited support for highly fragmented files, + i.e. ones which have their data attribute split across multiple extents, is + included. Another limitation is that write(2) will never create sparse + files, since to mark a file sparse we need to modify the directory entry for + the file and we do not implement directory modifications yet. + +Supported mount options +======================= + +In addition to the generic mount options described by the manual page for the +mount command (man 8 mount, also see man 5 fstab), the NTFS driver supports the +following mount options: + +======================= ======================================================= +iocharset=name Deprecated option. Still supported but please use + nls=name in the future. See description for nls=name. + +nls=name Character set to use when returning file names. + Unlike VFAT, NTFS suppresses names that contain + unconvertible characters. Note that most character + sets contain insufficient characters to represent all + possible Unicode characters that can exist on NTFS. + To be sure you are not missing any files, you are + advised to use nls=utf8 which is capable of + representing all Unicode characters. + +utf8=<bool> Option no longer supported. Currently mapped to + nls=utf8 but please use nls=utf8 in the future and + make sure utf8 is compiled either as module or into + the kernel. See description for nls=name. + +uid= +gid= +umask= Provide default owner, group, and access mode mask. + These options work as documented in mount(8). By + default, the files/directories are owned by root and + he/she has read and write permissions, as well as + browse permission for directories. No one else has any + access permissions. I.e. the mode on all files is by + default rw------- and for directories rwx------, a + consequence of the default fmask=0177 and dmask=0077. + Using a umask of zero will grant all permissions to + everyone, i.e. all files and directories will have mode + rwxrwxrwx. + +fmask= +dmask= Instead of specifying umask which applies both to + files and directories, fmask applies only to files and + dmask only to directories. + +sloppy=<BOOL> If sloppy is specified, ignore unknown mount options. + Otherwise the default behaviour is to abort mount if + any unknown options are found. + +show_sys_files=<BOOL> If show_sys_files is specified, show the system files + in directory listings. Otherwise the default behaviour + is to hide the system files. + Note that even when show_sys_files is specified, "$MFT" + will not be visible due to bugs/mis-features in glibc. + Further, note that irrespective of show_sys_files, all + files are accessible by name, i.e. you can always do + "ls -l \$UpCase" for example to specifically show the + system file containing the Unicode upcase table. + +case_sensitive=<BOOL> If case_sensitive is specified, treat all file names as + case sensitive and create file names in the POSIX + namespace. Otherwise the default behaviour is to treat + file names as case insensitive and to create file names + in the WIN32/LONG name space. Note, the Linux NTFS + driver will never create short file names and will + remove them on rename/delete of the corresponding long + file name. + Note that files remain accessible via their short file + name, if it exists. If case_sensitive, you will need + to provide the correct case of the short file name. + +disable_sparse=<BOOL> If disable_sparse is specified, creation of sparse + regions, i.e. holes, inside files is disabled for the + volume (for the duration of this mount only). By + default, creation of sparse regions is enabled, which + is consistent with the behaviour of traditional Unix + filesystems. + +errors=opt What to do when critical filesystem errors are found. + Following values can be used for "opt": + + ======== ========================================= + continue DEFAULT, try to clean-up as much as + possible, e.g. marking a corrupt inode as + bad so it is no longer accessed, and then + continue. + recover At present only supported is recovery of + the boot sector from the backup copy. + If read-only mount, the recovery is done + in memory only and not written to disk. + ======== ========================================= + + Note that the options are additive, i.e. specifying:: + + errors=continue,errors=recover + + means the driver will attempt to recover and if that + fails it will clean-up as much as possible and + continue. + +mft_zone_multiplier= Set the MFT zone multiplier for the volume (this + setting is not persistent across mounts and can be + changed from mount to mount but cannot be changed on + remount). Values of 1 to 4 are allowed, 1 being the + default. The MFT zone multiplier determines how much + space is reserved for the MFT on the volume. If all + other space is used up, then the MFT zone will be + shrunk dynamically, so this has no impact on the + amount of free space. However, it can have an impact + on performance by affecting fragmentation of the MFT. + In general use the default. If you have a lot of small + files then use a higher value. The values have the + following meaning: + + ===== ================================= + Value MFT zone size (% of volume size) + ===== ================================= + 1 12.5% + 2 25% + 3 37.5% + 4 50% + ===== ================================= + + Note this option is irrelevant for read-only mounts. +======================= ======================================================= + + +Known bugs and (mis-)features +============================= + +- The link count on each directory inode entry is set to 1, due to Linux not + supporting directory hard links. This may well confuse some user space + applications, since the directory names will have the same inode numbers. + This also speeds up ntfs_read_inode() immensely. And we haven't found any + problems with this approach so far. If you find a problem with this, please + let us know. + + +Please send bug reports/comments/feedback/abuse to the Linux-NTFS development +list at sourceforge: linux-ntfs-dev@lists.sourceforge.net + + +Using NTFS volume and stripe sets +================================= + +For support of volume and stripe sets, you can either use the kernel's +Device-Mapper driver or the kernel's Software RAID / MD driver. The former is +the recommended one to use for linear raid. But the latter is required for +raid level 5. For striping and mirroring, either driver should work fine. + + +The Device-Mapper driver +------------------------ + +You will need to create a table of the components of the volume/stripe set and +how they fit together and load this into the kernel using the dmsetup utility +(see man 8 dmsetup). + +Linear volume sets, i.e. linear raid, has been tested and works fine. Even +though untested, there is no reason why stripe sets, i.e. raid level 0, and +mirrors, i.e. raid level 1 should not work, too. Stripes with parity, i.e. +raid level 5, unfortunately cannot work yet because the current version of the +Device-Mapper driver does not support raid level 5. You may be able to use the +Software RAID / MD driver for raid level 5, see the next section for details. + +To create the table describing your volume you will need to know each of its +components and their sizes in sectors, i.e. multiples of 512-byte blocks. + +For NT4 fault tolerant volumes you can obtain the sizes using fdisk. So for +example if one of your partitions is /dev/hda2 you would do:: + + $ fdisk -ul /dev/hda + + Disk /dev/hda: 81.9 GB, 81964302336 bytes + 255 heads, 63 sectors/track, 9964 cylinders, total 160086528 sectors + Units = sectors of 1 * 512 = 512 bytes + + Device Boot Start End Blocks Id System + /dev/hda1 * 63 4209029 2104483+ 83 Linux + /dev/hda2 4209030 37768814 16779892+ 86 NTFS + /dev/hda3 37768815 46170809 4200997+ 83 Linux + +And you would know that /dev/hda2 has a size of 37768814 - 4209030 + 1 = +33559785 sectors. + +For Win2k and later dynamic disks, you can for example use the ldminfo utility +which is part of the Linux LDM tools (the latest version at the time of +writing is linux-ldm-0.0.8.tar.bz2). You can download it from: + + http://www.linux-ntfs.org/ + +Simply extract the downloaded archive (tar xvjf linux-ldm-0.0.8.tar.bz2), go +into it (cd linux-ldm-0.0.8) and change to the test directory (cd test). You +will find the precompiled (i386) ldminfo utility there. NOTE: You will not be +able to compile this yourself easily so use the binary version! + +Then you would use ldminfo in dump mode to obtain the necessary information:: + + $ ./ldminfo --dump /dev/hda + +This would dump the LDM database found on /dev/hda which describes all of your +dynamic disks and all the volumes on them. At the bottom you will see the +VOLUME DEFINITIONS section which is all you really need. You may need to look +further above to determine which of the disks in the volume definitions is +which device in Linux. Hint: Run ldminfo on each of your dynamic disks and +look at the Disk Id close to the top of the output for each (the PRIVATE HEADER +section). You can then find these Disk Ids in the VBLK DATABASE section in the +<Disk> components where you will get the LDM Name for the disk that is found in +the VOLUME DEFINITIONS section. + +Note you will also need to enable the LDM driver in the Linux kernel. If your +distribution did not enable it, you will need to recompile the kernel with it +enabled. This will create the LDM partitions on each device at boot time. You +would then use those devices (for /dev/hda they would be /dev/hda1, 2, 3, etc) +in the Device-Mapper table. + +You can also bypass using the LDM driver by using the main device (e.g. +/dev/hda) and then using the offsets of the LDM partitions into this device as +the "Start sector of device" when creating the table. Once again ldminfo would +give you the correct information to do this. + +Assuming you know all your devices and their sizes things are easy. + +For a linear raid the table would look like this (note all values are in +512-byte sectors):: + + # Offset into Size of this Raid type Device Start sector + # volume device of device + 0 1028161 linear /dev/hda1 0 + 1028161 3903762 linear /dev/hdb2 0 + 4931923 2103211 linear /dev/hdc1 0 + +For a striped volume, i.e. raid level 0, you will need to know the chunk size +you used when creating the volume. Windows uses 64kiB as the default, so it +will probably be this unless you changes the defaults when creating the array. + +For a raid level 0 the table would look like this (note all values are in +512-byte sectors):: + + # Offset Size Raid Number Chunk 1st Start 2nd Start + # into of the type of size Device in Device in + # volume volume stripes device device + 0 2056320 striped 2 128 /dev/hda1 0 /dev/hdb1 0 + +If there are more than two devices, just add each of them to the end of the +line. + +Finally, for a mirrored volume, i.e. raid level 1, the table would look like +this (note all values are in 512-byte sectors):: + + # Ofs Size Raid Log Number Region Should Number Source Start Target Start + # in of the type type of log size sync? of Device in Device in + # vol volume params mirrors Device Device + 0 2056320 mirror core 2 16 nosync 2 /dev/hda1 0 /dev/hdb1 0 + +If you are mirroring to multiple devices you can specify further targets at the +end of the line. + +Note the "Should sync?" parameter "nosync" means that the two mirrors are +already in sync which will be the case on a clean shutdown of Windows. If the +mirrors are not clean, you can specify the "sync" option instead of "nosync" +and the Device-Mapper driver will then copy the entirety of the "Source Device" +to the "Target Device" or if you specified multiple target devices to all of +them. + +Once you have your table, save it in a file somewhere (e.g. /etc/ntfsvolume1), +and hand it over to dmsetup to work with, like so:: + + $ dmsetup create myvolume1 /etc/ntfsvolume1 + +You can obviously replace "myvolume1" with whatever name you like. + +If it all worked, you will now have the device /dev/device-mapper/myvolume1 +which you can then just use as an argument to the mount command as usual to +mount the ntfs volume. For example:: + + $ mount -t ntfs -o ro /dev/device-mapper/myvolume1 /mnt/myvol1 + +(You need to create the directory /mnt/myvol1 first and of course you can use +anything you like instead of /mnt/myvol1 as long as it is an existing +directory.) + +It is advisable to do the mount read-only to see if the volume has been setup +correctly to avoid the possibility of causing damage to the data on the ntfs +volume. + + +The Software RAID / MD driver +----------------------------- + +An alternative to using the Device-Mapper driver is to use the kernel's +Software RAID / MD driver. For which you need to set up your /etc/raidtab +appropriately (see man 5 raidtab). + +Linear volume sets, i.e. linear raid, as well as stripe sets, i.e. raid level +0, have been tested and work fine (though see section "Limitations when using +the MD driver with NTFS volumes" especially if you want to use linear raid). +Even though untested, there is no reason why mirrors, i.e. raid level 1, and +stripes with parity, i.e. raid level 5, should not work, too. + +You have to use the "persistent-superblock 0" option for each raid-disk in the +NTFS volume/stripe you are configuring in /etc/raidtab as the persistent +superblock used by the MD driver would damage the NTFS volume. + +Windows by default uses a stripe chunk size of 64k, so you probably want the +"chunk-size 64k" option for each raid-disk, too. + +For example, if you have a stripe set consisting of two partitions /dev/hda5 +and /dev/hdb1 your /etc/raidtab would look like this:: + + raiddev /dev/md0 + raid-level 0 + nr-raid-disks 2 + nr-spare-disks 0 + persistent-superblock 0 + chunk-size 64k + device /dev/hda5 + raid-disk 0 + device /dev/hdb1 + raid-disk 1 + +For linear raid, just change the raid-level above to "raid-level linear", for +mirrors, change it to "raid-level 1", and for stripe sets with parity, change +it to "raid-level 5". + +Note for stripe sets with parity you will also need to tell the MD driver +which parity algorithm to use by specifying the option "parity-algorithm +which", where you need to replace "which" with the name of the algorithm to +use (see man 5 raidtab for available algorithms) and you will have to try the +different available algorithms until you find one that works. Make sure you +are working read-only when playing with this as you may damage your data +otherwise. If you find which algorithm works please let us know (email the +linux-ntfs developers list linux-ntfs-dev@lists.sourceforge.net or drop in on +IRC in channel #ntfs on the irc.freenode.net network) so we can update this +documentation. + +Once the raidtab is setup, run for example raid0run -a to start all devices or +raid0run /dev/md0 to start a particular md device, in this case /dev/md0. + +Then just use the mount command as usual to mount the ntfs volume using for +example:: + + mount -t ntfs -o ro /dev/md0 /mnt/myntfsvolume + +It is advisable to do the mount read-only to see if the md volume has been +setup correctly to avoid the possibility of causing damage to the data on the +ntfs volume. + + +Limitations when using the Software RAID / MD driver +----------------------------------------------------- + +Using the md driver will not work properly if any of your NTFS partitions have +an odd number of sectors. This is especially important for linear raid as all +data after the first partition with an odd number of sectors will be offset by +one or more sectors so if you mount such a partition with write support you +will cause massive damage to the data on the volume which will only become +apparent when you try to use the volume again under Windows. + +So when using linear raid, make sure that all your partitions have an even +number of sectors BEFORE attempting to use it. You have been warned! + +Even better is to simply use the Device-Mapper for linear raid and then you do +not have this problem with odd numbers of sectors. diff --git a/Documentation/filesystems/ocfs2-online-filecheck.rst b/Documentation/filesystems/ocfs2-online-filecheck.rst new file mode 100644 index 000000000..2257bb53e --- /dev/null +++ b/Documentation/filesystems/ocfs2-online-filecheck.rst @@ -0,0 +1,99 @@ +.. SPDX-License-Identifier: GPL-2.0 + +===================================== +OCFS2 file system - online file check +===================================== + +This document will describe OCFS2 online file check feature. + +Introduction +============ +OCFS2 is often used in high-availability systems. However, OCFS2 usually +converts the filesystem to read-only when encounters an error. This may not be +necessary, since turning the filesystem read-only would affect other running +processes as well, decreasing availability. +Then, a mount option (errors=continue) is introduced, which would return the +-EIO errno to the calling process and terminate further processing so that the +filesystem is not corrupted further. The filesystem is not converted to +read-only, and the problematic file's inode number is reported in the kernel +log. The user can try to check/fix this file via online filecheck feature. + +Scope +===== +This effort is to check/fix small issues which may hinder day-to-day operations +of a cluster filesystem by turning the filesystem read-only. The scope of +checking/fixing is at the file level, initially for regular files and eventually +to all files (including system files) of the filesystem. + +In case of directory to file links is incorrect, the directory inode is +reported as erroneous. + +This feature is not suited for extravagant checks which involve dependency of +other components of the filesystem, such as but not limited to, checking if the +bits for file blocks in the allocation has been set. In case of such an error, +the offline fsck should/would be recommended. + +Finally, such an operation/feature should not be automated lest the filesystem +may end up with more damage than before the repair attempt. So, this has to +be performed using user interaction and consent. + +User interface +============== +When there are errors in the OCFS2 filesystem, they are usually accompanied +by the inode number which caused the error. This inode number would be the +input to check/fix the file. + +There is a sysfs directory for each OCFS2 file system mounting:: + + /sys/fs/ocfs2/<devname>/filecheck + +Here, <devname> indicates the name of OCFS2 volume device which has been already +mounted. The file above would accept inode numbers. This could be used to +communicate with kernel space, tell which file(inode number) will be checked or +fixed. Currently, three operations are supported, which includes checking +inode, fixing inode and setting the size of result record history. + +1. If you want to know what error exactly happened to <inode> before fixing, do:: + + # echo "<inode>" > /sys/fs/ocfs2/<devname>/filecheck/check + # cat /sys/fs/ocfs2/<devname>/filecheck/check + +The output is like this:: + + INO DONE ERROR + 39502 1 GENERATION + + <INO> lists the inode numbers. + <DONE> indicates whether the operation has been finished. + <ERROR> says what kind of errors was found. For the detailed error numbers, + please refer to the file linux/fs/ocfs2/filecheck.h. + +2. If you determine to fix this inode, do:: + + # echo "<inode>" > /sys/fs/ocfs2/<devname>/filecheck/fix + # cat /sys/fs/ocfs2/<devname>/filecheck/fix + +The output is like this::: + + INO DONE ERROR + 39502 1 SUCCESS + +This time, the <ERROR> column indicates whether this fix is successful or not. + +3. The record cache is used to store the history of check/fix results. It's +default size is 10, and can be adjust between the range of 10 ~ 100. You can +adjust the size like this:: + + # echo "<size>" > /sys/fs/ocfs2/<devname>/filecheck/set + +Fixing stuff +============ +On receiving the inode, the filesystem would read the inode and the +file metadata. In case of errors, the filesystem would fix the errors +and report the problems it fixed in the kernel log. As a precautionary measure, +the inode must first be checked for errors before performing a final fix. + +The inode and the result history will be maintained temporarily in a +small linked list buffer which would contain the last (N) inodes +fixed/checked, the detailed errors which were fixed/checked are printed in the +kernel log. diff --git a/Documentation/filesystems/ocfs2.rst b/Documentation/filesystems/ocfs2.rst new file mode 100644 index 000000000..42ca9a3d4 --- /dev/null +++ b/Documentation/filesystems/ocfs2.rst @@ -0,0 +1,117 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================ +OCFS2 filesystem +================ + +OCFS2 is a general purpose extent based shared disk cluster file +system with many similarities to ext3. It supports 64 bit inode +numbers, and has automatically extending metadata groups which may +also make it attractive for non-clustered use. + +You'll want to install the ocfs2-tools package in order to at least +get "mount.ocfs2" and "ocfs2_hb_ctl". + +Project web page: http://ocfs2.wiki.kernel.org +Tools git tree: https://github.com/markfasheh/ocfs2-tools +OCFS2 mailing lists: https://oss.oracle.com/projects/ocfs2/mailman/ + +All code copyright 2005 Oracle except when otherwise noted. + +Credits +======= + +Lots of code taken from ext3 and other projects. + +Authors in alphabetical order: + +- Joel Becker <joel.becker@oracle.com> +- Zach Brown <zach.brown@oracle.com> +- Mark Fasheh <mfasheh@suse.com> +- Kurt Hackel <kurt.hackel@oracle.com> +- Tao Ma <tao.ma@oracle.com> +- Sunil Mushran <sunil.mushran@oracle.com> +- Manish Singh <manish.singh@oracle.com> +- Tiger Yang <tiger.yang@oracle.com> + +Caveats +======= +Features which OCFS2 does not support yet: + + - Directory change notification (F_NOTIFY) + - Distributed Caching (F_SETLEASE/F_GETLEASE/break_lease) + +Mount options +============= + +OCFS2 supports the following mount options: + +(*) == default + +======================= ======================================================== +barrier=1 This enables/disables barriers. barrier=0 disables it, + barrier=1 enables it. +errors=remount-ro(*) Remount the filesystem read-only on an error. +errors=panic Panic and halt the machine if an error occurs. +intr (*) Allow signals to interrupt cluster operations. +nointr Do not allow signals to interrupt cluster + operations. +noatime Do not update access time. +relatime(*) Update atime if the previous atime is older than + mtime or ctime +strictatime Always update atime, but the minimum update interval + is specified by atime_quantum. +atime_quantum=60(*) OCFS2 will not update atime unless this number + of seconds has passed since the last update. + Set to zero to always update atime. This option need + work with strictatime. +data=ordered (*) All data are forced directly out to the main file + system prior to its metadata being committed to the + journal. +data=writeback Data ordering is not preserved, data may be written + into the main file system after its metadata has been + committed to the journal. +preferred_slot=0(*) During mount, try to use this filesystem slot first. If + it is in use by another node, the first empty one found + will be chosen. Invalid values will be ignored. +commit=nrsec (*) Ocfs2 can be told to sync all its data and metadata + every 'nrsec' seconds. The default value is 5 seconds. + This means that if you lose your power, you will lose + as much as the latest 5 seconds of work (your + filesystem will not be damaged though, thanks to the + journaling). This default value (or any low value) + will hurt performance, but it's good for data-safety. + Setting it to 0 will have the same effect as leaving + it at the default (5 seconds). + Setting it to very large values will improve + performance. +localalloc=8(*) Allows custom localalloc size in MB. If the value is too + large, the fs will silently revert it to the default. +localflocks This disables cluster aware flock. +inode64 Indicates that Ocfs2 is allowed to create inodes at + any location in the filesystem, including those which + will result in inode numbers occupying more than 32 + bits of significance. +user_xattr (*) Enables Extended User Attributes. +nouser_xattr Disables Extended User Attributes. +acl Enables POSIX Access Control Lists support. +noacl (*) Disables POSIX Access Control Lists support. +resv_level=2 (*) Set how aggressive allocation reservations will be. + Valid values are between 0 (reservations off) to 8 + (maximum space for reservations). +dir_resv_level= (*) By default, directory reservations will scale with file + reservations - users should rarely need to change this + value. If allocation reservations are turned off, this + option will have no effect. +coherency=full (*) Disallow concurrent O_DIRECT writes, cluster inode + lock will be taken to force other nodes drop cache, + therefore full cluster coherency is guaranteed even + for O_DIRECT writes. +coherency=buffered Allow concurrent O_DIRECT writes without EX lock among + nodes, which gains high performance at risk of getting + stale data on other nodes. +journal_async_commit Commit block can be written to disk without waiting + for descriptor blocks. If enabled older kernels cannot + mount the device. This will enable 'journal_checksum' + internally. +======================= ======================================================== diff --git a/Documentation/filesystems/omfs.rst b/Documentation/filesystems/omfs.rst new file mode 100644 index 000000000..a104c25b7 --- /dev/null +++ b/Documentation/filesystems/omfs.rst @@ -0,0 +1,112 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================================ +Optimized MPEG Filesystem (OMFS) +================================ + +Overview +======== + +OMFS is a filesystem created by SonicBlue for use in the ReplayTV DVR +and Rio Karma MP3 player. The filesystem is extent-based, utilizing +block sizes from 2k to 8k, with hash-based directories. This +filesystem driver may be used to read and write disks from these +devices. + +Note, it is not recommended that this FS be used in place of a general +filesystem for your own streaming media device. Native Linux filesystems +will likely perform better. + +More information is available at: + + http://linux-karma.sf.net/ + +Various utilities, including mkomfs and omfsck, are included with +omfsprogs, available at: + + https://bobcopeland.com/karma/ + +Instructions are included in its README. + +Options +======= + +OMFS supports the following mount-time options: + + ============ ======================================== + uid=n make all files owned by specified user + gid=n make all files owned by specified group + umask=xxx set permission umask to xxx + fmask=xxx set umask to xxx for files + dmask=xxx set umask to xxx for directories + ============ ======================================== + +Disk format +=========== + +OMFS discriminates between "sysblocks" and normal data blocks. The sysblock +group consists of super block information, file metadata, directory structures, +and extents. Each sysblock has a header containing CRCs of the entire +sysblock, and may be mirrored in successive blocks on the disk. A sysblock may +have a smaller size than a data block, but since they are both addressed by the +same 64-bit block number, any remaining space in the smaller sysblock is +unused. + +Sysblock header information:: + + struct omfs_header { + __be64 h_self; /* FS block where this is located */ + __be32 h_body_size; /* size of useful data after header */ + __be16 h_crc; /* crc-ccitt of body_size bytes */ + char h_fill1[2]; + u8 h_version; /* version, always 1 */ + char h_type; /* OMFS_INODE_X */ + u8 h_magic; /* OMFS_IMAGIC */ + u8 h_check_xor; /* XOR of header bytes before this */ + __be32 h_fill2; + }; + +Files and directories are both represented by omfs_inode:: + + struct omfs_inode { + struct omfs_header i_head; /* header */ + __be64 i_parent; /* parent containing this inode */ + __be64 i_sibling; /* next inode in hash bucket */ + __be64 i_ctime; /* ctime, in milliseconds */ + char i_fill1[35]; + char i_type; /* OMFS_[DIR,FILE] */ + __be32 i_fill2; + char i_fill3[64]; + char i_name[OMFS_NAMELEN]; /* filename */ + __be64 i_size; /* size of file, in bytes */ + }; + +Directories in OMFS are implemented as a large hash table. Filenames are +hashed then prepended into the bucket list beginning at OMFS_DIR_START. +Lookup requires hashing the filename, then seeking across i_sibling pointers +until a match is found on i_name. Empty buckets are represented by block +pointers with all-1s (~0). + +A file is an omfs_inode structure followed by an extent table beginning at +OMFS_EXTENT_START:: + + struct omfs_extent_entry { + __be64 e_cluster; /* start location of a set of blocks */ + __be64 e_blocks; /* number of blocks after e_cluster */ + }; + + struct omfs_extent { + __be64 e_next; /* next extent table location */ + __be32 e_extent_count; /* total # extents in this table */ + __be32 e_fill; + struct omfs_extent_entry e_entry; /* start of extent entries */ + }; + +Each extent holds the block offset followed by number of blocks allocated to +the extent. The final extent in each table is a terminator with e_cluster +being ~0 and e_blocks being ones'-complement of the total number of blocks +in the table. + +If this table overflows, a continuation inode is written and pointed to by +e_next. These have a header but lack the rest of the inode structure. + diff --git a/Documentation/filesystems/orangefs.rst b/Documentation/filesystems/orangefs.rst new file mode 100644 index 000000000..463e37694 --- /dev/null +++ b/Documentation/filesystems/orangefs.rst @@ -0,0 +1,556 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======== +ORANGEFS +======== + +OrangeFS is an LGPL userspace scale-out parallel storage system. It is ideal +for large storage problems faced by HPC, BigData, Streaming Video, +Genomics, Bioinformatics. + +Orangefs, originally called PVFS, was first developed in 1993 by +Walt Ligon and Eric Blumer as a parallel file system for Parallel +Virtual Machine (PVM) as part of a NASA grant to study the I/O patterns +of parallel programs. + +Orangefs features include: + + * Distributes file data among multiple file servers + * Supports simultaneous access by multiple clients + * Stores file data and metadata on servers using local file system + and access methods + * Userspace implementation is easy to install and maintain + * Direct MPI support + * Stateless + + +Mailing List Archives +===================== + +http://lists.orangefs.org/pipermail/devel_lists.orangefs.org/ + + +Mailing List Submissions +======================== + +devel@lists.orangefs.org + + +Documentation +============= + +http://www.orangefs.org/documentation/ + +Running ORANGEFS On a Single Server +=================================== + +OrangeFS is usually run in large installations with multiple servers and +clients, but a complete filesystem can be run on a single machine for +development and testing. + +On Fedora, install orangefs and orangefs-server:: + + dnf -y install orangefs orangefs-server + +There is an example server configuration file in +/etc/orangefs/orangefs.conf. Change localhost to your hostname if +necessary. + +To generate a filesystem to run xfstests against, see below. + +There is an example client configuration file in /etc/pvfs2tab. It is a +single line. Uncomment it and change the hostname if necessary. This +controls clients which use libpvfs2. This does not control the +pvfs2-client-core. + +Create the filesystem:: + + pvfs2-server -f /etc/orangefs/orangefs.conf + +Start the server:: + + systemctl start orangefs-server + +Test the server:: + + pvfs2-ping -m /pvfsmnt + +Start the client. The module must be compiled in or loaded before this +point:: + + systemctl start orangefs-client + +Mount the filesystem:: + + mount -t pvfs2 tcp://localhost:3334/orangefs /pvfsmnt + +Userspace Filesystem Source +=========================== + +http://www.orangefs.org/download + +Orangefs versions prior to 2.9.3 would not be compatible with the +upstream version of the kernel client. + + +Building ORANGEFS on a Single Server +==================================== + +Where OrangeFS cannot be installed from distribution packages, it may be +built from source. + +You can omit --prefix if you don't care that things are sprinkled around +in /usr/local. As of version 2.9.6, OrangeFS uses Berkeley DB by +default, we will probably be changing the default to LMDB soon. + +:: + + ./configure --prefix=/opt/ofs --with-db-backend=lmdb --disable-usrint + + make + + make install + +Create an orangefs config file by running pvfs2-genconfig and +specifying a target config file. Pvfs2-genconfig will prompt you +through. Generally it works fine to take the defaults, but you +should use your server's hostname, rather than "localhost" when +it comes to that question:: + + /opt/ofs/bin/pvfs2-genconfig /etc/pvfs2.conf + +Create an /etc/pvfs2tab file (localhost is fine):: + + echo tcp://localhost:3334/orangefs /pvfsmnt pvfs2 defaults,noauto 0 0 > \ + /etc/pvfs2tab + +Create the mount point you specified in the tab file if needed:: + + mkdir /pvfsmnt + +Bootstrap the server:: + + /opt/ofs/sbin/pvfs2-server -f /etc/pvfs2.conf + +Start the server:: + + /opt/ofs/sbin/pvfs2-server /etc/pvfs2.conf + +Now the server should be running. Pvfs2-ls is a simple +test to verify that the server is running:: + + /opt/ofs/bin/pvfs2-ls /pvfsmnt + +If stuff seems to be working, load the kernel module and +turn on the client core:: + + /opt/ofs/sbin/pvfs2-client -p /opt/ofs/sbin/pvfs2-client-core + +Mount your filesystem:: + + mount -t pvfs2 tcp://`hostname`:3334/orangefs /pvfsmnt + + +Running xfstests +================ + +It is useful to use a scratch filesystem with xfstests. This can be +done with only one server. + +Make a second copy of the FileSystem section in the server configuration +file, which is /etc/orangefs/orangefs.conf. Change the Name to scratch. +Change the ID to something other than the ID of the first FileSystem +section (2 is usually a good choice). + +Then there are two FileSystem sections: orangefs and scratch. + +This change should be made before creating the filesystem. + +:: + + pvfs2-server -f /etc/orangefs/orangefs.conf + +To run xfstests, create /etc/xfsqa.config:: + + TEST_DIR=/orangefs + TEST_DEV=tcp://localhost:3334/orangefs + SCRATCH_MNT=/scratch + SCRATCH_DEV=tcp://localhost:3334/scratch + +Then xfstests can be run:: + + ./check -pvfs2 + + +Options +======= + +The following mount options are accepted: + + acl + Allow the use of Access Control Lists on files and directories. + + intr + Some operations between the kernel client and the user space + filesystem can be interruptible, such as changes in debug levels + and the setting of tunable parameters. + + local_lock + Enable posix locking from the perspective of "this" kernel. The + default file_operations lock action is to return ENOSYS. Posix + locking kicks in if the filesystem is mounted with -o local_lock. + Distributed locking is being worked on for the future. + + +Debugging +========= + +If you want the debug (GOSSIP) statements in a particular +source file (inode.c for example) go to syslog:: + + echo inode > /sys/kernel/debug/orangefs/kernel-debug + +No debugging (the default):: + + echo none > /sys/kernel/debug/orangefs/kernel-debug + +Debugging from several source files:: + + echo inode,dir > /sys/kernel/debug/orangefs/kernel-debug + +All debugging:: + + echo all > /sys/kernel/debug/orangefs/kernel-debug + +Get a list of all debugging keywords:: + + cat /sys/kernel/debug/orangefs/debug-help + + +Protocol between Kernel Module and Userspace +============================================ + +Orangefs is a user space filesystem and an associated kernel module. +We'll just refer to the user space part of Orangefs as "userspace" +from here on out. Orangefs descends from PVFS, and userspace code +still uses PVFS for function and variable names. Userspace typedefs +many of the important structures. Function and variable names in +the kernel module have been transitioned to "orangefs", and The Linux +Coding Style avoids typedefs, so kernel module structures that +correspond to userspace structures are not typedefed. + +The kernel module implements a pseudo device that userspace +can read from and write to. Userspace can also manipulate the +kernel module through the pseudo device with ioctl. + +The Bufmap +---------- + +At startup userspace allocates two page-size-aligned (posix_memalign) +mlocked memory buffers, one is used for IO and one is used for readdir +operations. The IO buffer is 41943040 bytes and the readdir buffer is +4194304 bytes. Each buffer contains logical chunks, or partitions, and +a pointer to each buffer is added to its own PVFS_dev_map_desc structure +which also describes its total size, as well as the size and number of +the partitions. + +A pointer to the IO buffer's PVFS_dev_map_desc structure is sent to a +mapping routine in the kernel module with an ioctl. The structure is +copied from user space to kernel space with copy_from_user and is used +to initialize the kernel module's "bufmap" (struct orangefs_bufmap), which +then contains: + + * refcnt + - a reference counter + * desc_size - PVFS2_BUFMAP_DEFAULT_DESC_SIZE (4194304) - the IO buffer's + partition size, which represents the filesystem's block size and + is used for s_blocksize in super blocks. + * desc_count - PVFS2_BUFMAP_DEFAULT_DESC_COUNT (10) - the number of + partitions in the IO buffer. + * desc_shift - log2(desc_size), used for s_blocksize_bits in super blocks. + * total_size - the total size of the IO buffer. + * page_count - the number of 4096 byte pages in the IO buffer. + * page_array - a pointer to ``page_count * (sizeof(struct page*))`` bytes + of kcalloced memory. This memory is used as an array of pointers + to each of the pages in the IO buffer through a call to get_user_pages. + * desc_array - a pointer to ``desc_count * (sizeof(struct orangefs_bufmap_desc))`` + bytes of kcalloced memory. This memory is further intialized: + + user_desc is the kernel's copy of the IO buffer's ORANGEFS_dev_map_desc + structure. user_desc->ptr points to the IO buffer. + + :: + + pages_per_desc = bufmap->desc_size / PAGE_SIZE + offset = 0 + + bufmap->desc_array[0].page_array = &bufmap->page_array[offset] + bufmap->desc_array[0].array_count = pages_per_desc = 1024 + bufmap->desc_array[0].uaddr = (user_desc->ptr) + (0 * 1024 * 4096) + offset += 1024 + . + . + . + bufmap->desc_array[9].page_array = &bufmap->page_array[offset] + bufmap->desc_array[9].array_count = pages_per_desc = 1024 + bufmap->desc_array[9].uaddr = (user_desc->ptr) + + (9 * 1024 * 4096) + offset += 1024 + + * buffer_index_array - a desc_count sized array of ints, used to + indicate which of the IO buffer's partitions are available to use. + * buffer_index_lock - a spinlock to protect buffer_index_array during update. + * readdir_index_array - a five (ORANGEFS_READDIR_DEFAULT_DESC_COUNT) element + int array used to indicate which of the readdir buffer's partitions are + available to use. + * readdir_index_lock - a spinlock to protect readdir_index_array during + update. + +Operations +---------- + +The kernel module builds an "op" (struct orangefs_kernel_op_s) when it +needs to communicate with userspace. Part of the op contains the "upcall" +which expresses the request to userspace. Part of the op eventually +contains the "downcall" which expresses the results of the request. + +The slab allocator is used to keep a cache of op structures handy. + +At init time the kernel module defines and initializes a request list +and an in_progress hash table to keep track of all the ops that are +in flight at any given time. + +Ops are stateful: + + * unknown + - op was just initialized + * waiting + - op is on request_list (upward bound) + * inprogr + - op is in progress (waiting for downcall) + * serviced + - op has matching downcall; ok + * purged + - op has to start a timer since client-core + exited uncleanly before servicing op + * given up + - submitter has given up waiting for it + +When some arbitrary userspace program needs to perform a +filesystem operation on Orangefs (readdir, I/O, create, whatever) +an op structure is initialized and tagged with a distinguishing ID +number. The upcall part of the op is filled out, and the op is +passed to the "service_operation" function. + +Service_operation changes the op's state to "waiting", puts +it on the request list, and signals the Orangefs file_operations.poll +function through a wait queue. Userspace is polling the pseudo-device +and thus becomes aware of the upcall request that needs to be read. + +When the Orangefs file_operations.read function is triggered, the +request list is searched for an op that seems ready-to-process. +The op is removed from the request list. The tag from the op and +the filled-out upcall struct are copy_to_user'ed back to userspace. + +If any of these (and some additional protocol) copy_to_users fail, +the op's state is set to "waiting" and the op is added back to +the request list. Otherwise, the op's state is changed to "in progress", +and the op is hashed on its tag and put onto the end of a list in the +in_progress hash table at the index the tag hashed to. + +When userspace has assembled the response to the upcall, it +writes the response, which includes the distinguishing tag, back to +the pseudo device in a series of io_vecs. This triggers the Orangefs +file_operations.write_iter function to find the op with the associated +tag and remove it from the in_progress hash table. As long as the op's +state is not "canceled" or "given up", its state is set to "serviced". +The file_operations.write_iter function returns to the waiting vfs, +and back to service_operation through wait_for_matching_downcall. + +Service operation returns to its caller with the op's downcall +part (the response to the upcall) filled out. + +The "client-core" is the bridge between the kernel module and +userspace. The client-core is a daemon. The client-core has an +associated watchdog daemon. If the client-core is ever signaled +to die, the watchdog daemon restarts the client-core. Even though +the client-core is restarted "right away", there is a period of +time during such an event that the client-core is dead. A dead client-core +can't be triggered by the Orangefs file_operations.poll function. +Ops that pass through service_operation during a "dead spell" can timeout +on the wait queue and one attempt is made to recycle them. Obviously, +if the client-core stays dead too long, the arbitrary userspace processes +trying to use Orangefs will be negatively affected. Waiting ops +that can't be serviced will be removed from the request list and +have their states set to "given up". In-progress ops that can't +be serviced will be removed from the in_progress hash table and +have their states set to "given up". + +Readdir and I/O ops are atypical with respect to their payloads. + + - readdir ops use the smaller of the two pre-allocated pre-partitioned + memory buffers. The readdir buffer is only available to userspace. + The kernel module obtains an index to a free partition before launching + a readdir op. Userspace deposits the results into the indexed partition + and then writes them to back to the pvfs device. + + - io (read and write) ops use the larger of the two pre-allocated + pre-partitioned memory buffers. The IO buffer is accessible from + both userspace and the kernel module. The kernel module obtains an + index to a free partition before launching an io op. The kernel module + deposits write data into the indexed partition, to be consumed + directly by userspace. Userspace deposits the results of read + requests into the indexed partition, to be consumed directly + by the kernel module. + +Responses to kernel requests are all packaged in pvfs2_downcall_t +structs. Besides a few other members, pvfs2_downcall_t contains a +union of structs, each of which is associated with a particular +response type. + +The several members outside of the union are: + + ``int32_t type`` + - type of operation. + ``int32_t status`` + - return code for the operation. + ``int64_t trailer_size`` + - 0 unless readdir operation. + ``char *trailer_buf`` + - initialized to NULL, used during readdir operations. + +The appropriate member inside the union is filled out for any +particular response. + + PVFS2_VFS_OP_FILE_IO + fill a pvfs2_io_response_t + + PVFS2_VFS_OP_LOOKUP + fill a PVFS_object_kref + + PVFS2_VFS_OP_CREATE + fill a PVFS_object_kref + + PVFS2_VFS_OP_SYMLINK + fill a PVFS_object_kref + + PVFS2_VFS_OP_GETATTR + fill in a PVFS_sys_attr_s (tons of stuff the kernel doesn't need) + fill in a string with the link target when the object is a symlink. + + PVFS2_VFS_OP_MKDIR + fill a PVFS_object_kref + + PVFS2_VFS_OP_STATFS + fill a pvfs2_statfs_response_t with useless info <g>. It is hard for + us to know, in a timely fashion, these statistics about our + distributed network filesystem. + + PVFS2_VFS_OP_FS_MOUNT + fill a pvfs2_fs_mount_response_t which is just like a PVFS_object_kref + except its members are in a different order and "__pad1" is replaced + with "id". + + PVFS2_VFS_OP_GETXATTR + fill a pvfs2_getxattr_response_t + + PVFS2_VFS_OP_LISTXATTR + fill a pvfs2_listxattr_response_t + + PVFS2_VFS_OP_PARAM + fill a pvfs2_param_response_t + + PVFS2_VFS_OP_PERF_COUNT + fill a pvfs2_perf_count_response_t + + PVFS2_VFS_OP_FSKEY + file a pvfs2_fs_key_response_t + + PVFS2_VFS_OP_READDIR + jamb everything needed to represent a pvfs2_readdir_response_t into + the readdir buffer descriptor specified in the upcall. + +Userspace uses writev() on /dev/pvfs2-req to pass responses to the requests +made by the kernel side. + +A buffer_list containing: + + - a pointer to the prepared response to the request from the + kernel (struct pvfs2_downcall_t). + - and also, in the case of a readdir request, a pointer to a + buffer containing descriptors for the objects in the target + directory. + +... is sent to the function (PINT_dev_write_list) which performs +the writev. + +PINT_dev_write_list has a local iovec array: struct iovec io_array[10]; + +The first four elements of io_array are initialized like this for all +responses:: + + io_array[0].iov_base = address of local variable "proto_ver" (int32_t) + io_array[0].iov_len = sizeof(int32_t) + + io_array[1].iov_base = address of global variable "pdev_magic" (int32_t) + io_array[1].iov_len = sizeof(int32_t) + + io_array[2].iov_base = address of parameter "tag" (PVFS_id_gen_t) + io_array[2].iov_len = sizeof(int64_t) + + io_array[3].iov_base = address of out_downcall member (pvfs2_downcall_t) + of global variable vfs_request (vfs_request_t) + io_array[3].iov_len = sizeof(pvfs2_downcall_t) + +Readdir responses initialize the fifth element io_array like this:: + + io_array[4].iov_base = contents of member trailer_buf (char *) + from out_downcall member of global variable + vfs_request + io_array[4].iov_len = contents of member trailer_size (PVFS_size) + from out_downcall member of global variable + vfs_request + +Orangefs exploits the dcache in order to avoid sending redundant +requests to userspace. We keep object inode attributes up-to-date with +orangefs_inode_getattr. Orangefs_inode_getattr uses two arguments to +help it decide whether or not to update an inode: "new" and "bypass". +Orangefs keeps private data in an object's inode that includes a short +timeout value, getattr_time, which allows any iteration of +orangefs_inode_getattr to know how long it has been since the inode was +updated. When the object is not new (new == 0) and the bypass flag is not +set (bypass == 0) orangefs_inode_getattr returns without updating the inode +if getattr_time has not timed out. Getattr_time is updated each time the +inode is updated. + +Creation of a new object (file, dir, sym-link) includes the evaluation of +its pathname, resulting in a negative directory entry for the object. +A new inode is allocated and associated with the dentry, turning it from +a negative dentry into a "productive full member of society". Orangefs +obtains the new inode from Linux with new_inode() and associates +the inode with the dentry by sending the pair back to Linux with +d_instantiate(). + +The evaluation of a pathname for an object resolves to its corresponding +dentry. If there is no corresponding dentry, one is created for it in +the dcache. Whenever a dentry is modified or verified Orangefs stores a +short timeout value in the dentry's d_time, and the dentry will be trusted +for that amount of time. Orangefs is a network filesystem, and objects +can potentially change out-of-band with any particular Orangefs kernel module +instance, so trusting a dentry is risky. The alternative to trusting +dentries is to always obtain the needed information from userspace - at +least a trip to the client-core, maybe to the servers. Obtaining information +from a dentry is cheap, obtaining it from userspace is relatively expensive, +hence the motivation to use the dentry when possible. + +The timeout values d_time and getattr_time are jiffy based, and the +code is designed to avoid the jiffy-wrap problem:: + + "In general, if the clock may have wrapped around more than once, there + is no way to tell how much time has elapsed. However, if the times t1 + and t2 are known to be fairly close, we can reliably compute the + difference in a way that takes into account the possibility that the + clock may have wrapped between times." + +from course notes by instructor Andy Wang + diff --git a/Documentation/filesystems/overlayfs.rst b/Documentation/filesystems/overlayfs.rst new file mode 100644 index 000000000..137afeb3f --- /dev/null +++ b/Documentation/filesystems/overlayfs.rst @@ -0,0 +1,605 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Written by: Neil Brown +Please see MAINTAINERS file for where to send questions. + +Overlay Filesystem +================== + +This document describes a prototype for a new approach to providing +overlay-filesystem functionality in Linux (sometimes referred to as +union-filesystems). An overlay-filesystem tries to present a +filesystem which is the result over overlaying one filesystem on top +of the other. + + +Overlay objects +--------------- + +The overlay filesystem approach is 'hybrid', because the objects that +appear in the filesystem do not always appear to belong to that filesystem. +In many cases, an object accessed in the union will be indistinguishable +from accessing the corresponding object from the original filesystem. +This is most obvious from the 'st_dev' field returned by stat(2). + +While directories will report an st_dev from the overlay-filesystem, +non-directory objects may report an st_dev from the lower filesystem or +upper filesystem that is providing the object. Similarly st_ino will +only be unique when combined with st_dev, and both of these can change +over the lifetime of a non-directory object. Many applications and +tools ignore these values and will not be affected. + +In the special case of all overlay layers on the same underlying +filesystem, all objects will report an st_dev from the overlay +filesystem and st_ino from the underlying filesystem. This will +make the overlay mount more compliant with filesystem scanners and +overlay objects will be distinguishable from the corresponding +objects in the original filesystem. + +On 64bit systems, even if all overlay layers are not on the same +underlying filesystem, the same compliant behavior could be achieved +with the "xino" feature. The "xino" feature composes a unique object +identifier from the real object st_ino and an underlying fsid index. + +If all underlying filesystems support NFS file handles and export file +handles with 32bit inode number encoding (e.g. ext4), overlay filesystem +will use the high inode number bits for fsid. Even when the underlying +filesystem uses 64bit inode numbers, users can still enable the "xino" +feature with the "-o xino=on" overlay mount option. That is useful for the +case of underlying filesystems like xfs and tmpfs, which use 64bit inode +numbers, but are very unlikely to use the high inode number bits. In case +the underlying inode number does overflow into the high xino bits, overlay +filesystem will fall back to the non xino behavior for that inode. + +The following table summarizes what can be expected in different overlay +configurations. + +Inode properties +```````````````` + ++--------------+------------+------------+-----------------+----------------+ +|Configuration | Persistent | Uniform | st_ino == d_ino | d_ino == i_ino | +| | st_ino | st_dev | | [*] | ++==============+=====+======+=====+======+========+========+========+=======+ +| | dir | !dir | dir | !dir | dir + !dir | dir | !dir | ++--------------+-----+------+-----+------+--------+--------+--------+-------+ +| All layers | Y | Y | Y | Y | Y | Y | Y | Y | +| on same fs | | | | | | | | | ++--------------+-----+------+-----+------+--------+--------+--------+-------+ +| Layers not | N | Y | Y | N | N | Y | N | Y | +| on same fs, | | | | | | | | | +| xino=off | | | | | | | | | ++--------------+-----+------+-----+------+--------+--------+--------+-------+ +| xino=on/auto | Y | Y | Y | Y | Y | Y | Y | Y | +| | | | | | | | | | ++--------------+-----+------+-----+------+--------+--------+--------+-------+ +| xino=on/auto,| N | Y | Y | N | N | Y | N | Y | +| ino overflow | | | | | | | | | ++--------------+-----+------+-----+------+--------+--------+--------+-------+ + +[*] nfsd v3 readdirplus verifies d_ino == i_ino. i_ino is exposed via several +/proc files, such as /proc/locks and /proc/self/fdinfo/<fd> of an inotify +file descriptor. + + +Upper and Lower +--------------- + +An overlay filesystem combines two filesystems - an 'upper' filesystem +and a 'lower' filesystem. When a name exists in both filesystems, the +object in the 'upper' filesystem is visible while the object in the +'lower' filesystem is either hidden or, in the case of directories, +merged with the 'upper' object. + +It would be more correct to refer to an upper and lower 'directory +tree' rather than 'filesystem' as it is quite possible for both +directory trees to be in the same filesystem and there is no +requirement that the root of a filesystem be given for either upper or +lower. + +The lower filesystem can be any filesystem supported by Linux and does +not need to be writable. The lower filesystem can even be another +overlayfs. The upper filesystem will normally be writable and if it +is it must support the creation of trusted.* extended attributes, and +must provide valid d_type in readdir responses, so NFS is not suitable. + +A read-only overlay of two read-only filesystems may use any +filesystem type. + +Directories +----------- + +Overlaying mainly involves directories. If a given name appears in both +upper and lower filesystems and refers to a non-directory in either, +then the lower object is hidden - the name refers only to the upper +object. + +Where both upper and lower objects are directories, a merged directory +is formed. + +At mount time, the two directories given as mount options "lowerdir" and +"upperdir" are combined into a merged directory: + + mount -t overlay overlay -olowerdir=/lower,upperdir=/upper,\ + workdir=/work /merged + +The "workdir" needs to be an empty directory on the same filesystem +as upperdir. + +Then whenever a lookup is requested in such a merged directory, the +lookup is performed in each actual directory and the combined result +is cached in the dentry belonging to the overlay filesystem. If both +actual lookups find directories, both are stored and a merged +directory is created, otherwise only one is stored: the upper if it +exists, else the lower. + +Only the lists of names from directories are merged. Other content +such as metadata and extended attributes are reported for the upper +directory only. These attributes of the lower directory are hidden. + +whiteouts and opaque directories +-------------------------------- + +In order to support rm and rmdir without changing the lower +filesystem, an overlay filesystem needs to record in the upper filesystem +that files have been removed. This is done using whiteouts and opaque +directories (non-directories are always opaque). + +A whiteout is created as a character device with 0/0 device number. +When a whiteout is found in the upper level of a merged directory, any +matching name in the lower level is ignored, and the whiteout itself +is also hidden. + +A directory is made opaque by setting the xattr "trusted.overlay.opaque" +to "y". Where the upper filesystem contains an opaque directory, any +directory in the lower filesystem with the same name is ignored. + +readdir +------- + +When a 'readdir' request is made on a merged directory, the upper and +lower directories are each read and the name lists merged in the +obvious way (upper is read first, then lower - entries that already +exist are not re-added). This merged name list is cached in the +'struct file' and so remains as long as the file is kept open. If the +directory is opened and read by two processes at the same time, they +will each have separate caches. A seekdir to the start of the +directory (offset 0) followed by a readdir will cause the cache to be +discarded and rebuilt. + +This means that changes to the merged directory do not appear while a +directory is being read. This is unlikely to be noticed by many +programs. + +seek offsets are assigned sequentially when the directories are read. +Thus if + + - read part of a directory + - remember an offset, and close the directory + - re-open the directory some time later + - seek to the remembered offset + +there may be little correlation between the old and new locations in +the list of filenames, particularly if anything has changed in the +directory. + +Readdir on directories that are not merged is simply handled by the +underlying directory (upper or lower). + +renaming directories +-------------------- + +When renaming a directory that is on the lower layer or merged (i.e. the +directory was not created on the upper layer to start with) overlayfs can +handle it in two different ways: + +1. return EXDEV error: this error is returned by rename(2) when trying to + move a file or directory across filesystem boundaries. Hence + applications are usually prepared to hande this error (mv(1) for example + recursively copies the directory tree). This is the default behavior. + +2. If the "redirect_dir" feature is enabled, then the directory will be + copied up (but not the contents). Then the "trusted.overlay.redirect" + extended attribute is set to the path of the original location from the + root of the overlay. Finally the directory is moved to the new + location. + +There are several ways to tune the "redirect_dir" feature. + +Kernel config options: + +- OVERLAY_FS_REDIRECT_DIR: + If this is enabled, then redirect_dir is turned on by default. +- OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW: + If this is enabled, then redirects are always followed by default. Enabling + this results in a less secure configuration. Enable this option only when + worried about backward compatibility with kernels that have the redirect_dir + feature and follow redirects even if turned off. + +Module options (can also be changed through /sys/module/overlay/parameters/): + +- "redirect_dir=BOOL": + See OVERLAY_FS_REDIRECT_DIR kernel config option above. +- "redirect_always_follow=BOOL": + See OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW kernel config option above. +- "redirect_max=NUM": + The maximum number of bytes in an absolute redirect (default is 256). + +Mount options: + +- "redirect_dir=on": + Redirects are enabled. +- "redirect_dir=follow": + Redirects are not created, but followed. +- "redirect_dir=off": + Redirects are not created and only followed if "redirect_always_follow" + feature is enabled in the kernel/module config. +- "redirect_dir=nofollow": + Redirects are not created and not followed (equivalent to "redirect_dir=off" + if "redirect_always_follow" feature is not enabled). + +When the NFS export feature is enabled, every copied up directory is +indexed by the file handle of the lower inode and a file handle of the +upper directory is stored in a "trusted.overlay.upper" extended attribute +on the index entry. On lookup of a merged directory, if the upper +directory does not match the file handle stores in the index, that is an +indication that multiple upper directories may be redirected to the same +lower directory. In that case, lookup returns an error and warns about +a possible inconsistency. + +Because lower layer redirects cannot be verified with the index, enabling +NFS export support on an overlay filesystem with no upper layer requires +turning off redirect follow (e.g. "redirect_dir=nofollow"). + + +Non-directories +--------------- + +Objects that are not directories (files, symlinks, device-special +files etc.) are presented either from the upper or lower filesystem as +appropriate. When a file in the lower filesystem is accessed in a way +the requires write-access, such as opening for write access, changing +some metadata etc., the file is first copied from the lower filesystem +to the upper filesystem (copy_up). Note that creating a hard-link +also requires copy_up, though of course creation of a symlink does +not. + +The copy_up may turn out to be unnecessary, for example if the file is +opened for read-write but the data is not modified. + +The copy_up process first makes sure that the containing directory +exists in the upper filesystem - creating it and any parents as +necessary. It then creates the object with the same metadata (owner, +mode, mtime, symlink-target etc.) and then if the object is a file, the +data is copied from the lower to the upper filesystem. Finally any +extended attributes are copied up. + +Once the copy_up is complete, the overlay filesystem simply +provides direct access to the newly created file in the upper +filesystem - future operations on the file are barely noticed by the +overlay filesystem (though an operation on the name of the file such as +rename or unlink will of course be noticed and handled). + + +Permission model +---------------- + +Permission checking in the overlay filesystem follows these principles: + + 1) permission check SHOULD return the same result before and after copy up + + 2) task creating the overlay mount MUST NOT gain additional privileges + + 3) non-mounting task MAY gain additional privileges through the overlay, + compared to direct access on underlying lower or upper filesystems + +This is achieved by performing two permission checks on each access + + a) check if current task is allowed access based on local DAC (owner, + group, mode and posix acl), as well as MAC checks + + b) check if mounting task would be allowed real operation on lower or + upper layer based on underlying filesystem permissions, again including + MAC checks + +Check (a) ensures consistency (1) since owner, group, mode and posix acls +are copied up. On the other hand it can result in server enforced +permissions (used by NFS, for example) being ignored (3). + +Check (b) ensures that no task gains permissions to underlying layers that +the mounting task does not have (2). This also means that it is possible +to create setups where the consistency rule (1) does not hold; normally, +however, the mounting task will have sufficient privileges to perform all +operations. + +Another way to demonstrate this model is drawing parallels between + + mount -t overlay overlay -olowerdir=/lower,upperdir=/upper,... /merged + +and + + cp -a /lower /upper + mount --bind /upper /merged + +The resulting access permissions should be the same. The difference is in +the time of copy (on-demand vs. up-front). + + +Multiple lower layers +--------------------- + +Multiple lower layers can now be given using the colon (":") as a +separator character between the directory names. For example: + + mount -t overlay overlay -olowerdir=/lower1:/lower2:/lower3 /merged + +As the example shows, "upperdir=" and "workdir=" may be omitted. In +that case the overlay will be read-only. + +The specified lower directories will be stacked beginning from the +rightmost one and going left. In the above example lower1 will be the +top, lower2 the middle and lower3 the bottom layer. + + +Metadata only copy up +--------------------- + +When metadata only copy up feature is enabled, overlayfs will only copy +up metadata (as opposed to whole file), when a metadata specific operation +like chown/chmod is performed. Full file will be copied up later when +file is opened for WRITE operation. + +In other words, this is delayed data copy up operation and data is copied +up when there is a need to actually modify data. + +There are multiple ways to enable/disable this feature. A config option +CONFIG_OVERLAY_FS_METACOPY can be set/unset to enable/disable this feature +by default. Or one can enable/disable it at module load time with module +parameter metacopy=on/off. Lastly, there is also a per mount option +metacopy=on/off to enable/disable this feature per mount. + +Do not use metacopy=on with untrusted upper/lower directories. Otherwise +it is possible that an attacker can create a handcrafted file with +appropriate REDIRECT and METACOPY xattrs, and gain access to file on lower +pointed by REDIRECT. This should not be possible on local system as setting +"trusted." xattrs will require CAP_SYS_ADMIN. But it should be possible +for untrusted layers like from a pen drive. + +Note: redirect_dir={off|nofollow|follow[*]} and nfs_export=on mount options +conflict with metacopy=on, and will result in an error. + +[*] redirect_dir=follow only conflicts with metacopy=on if upperdir=... is +given. + +Sharing and copying layers +-------------------------- + +Lower layers may be shared among several overlay mounts and that is indeed +a very common practice. An overlay mount may use the same lower layer +path as another overlay mount and it may use a lower layer path that is +beneath or above the path of another overlay lower layer path. + +Using an upper layer path and/or a workdir path that are already used by +another overlay mount is not allowed and may fail with EBUSY. Using +partially overlapping paths is not allowed and may fail with EBUSY. +If files are accessed from two overlayfs mounts which share or overlap the +upper layer and/or workdir path the behavior of the overlay is undefined, +though it will not result in a crash or deadlock. + +Mounting an overlay using an upper layer path, where the upper layer path +was previously used by another mounted overlay in combination with a +different lower layer path, is allowed, unless the "inodes index" feature +or "metadata only copy up" feature is enabled. + +With the "inodes index" feature, on the first time mount, an NFS file +handle of the lower layer root directory, along with the UUID of the lower +filesystem, are encoded and stored in the "trusted.overlay.origin" extended +attribute on the upper layer root directory. On subsequent mount attempts, +the lower root directory file handle and lower filesystem UUID are compared +to the stored origin in upper root directory. On failure to verify the +lower root origin, mount will fail with ESTALE. An overlayfs mount with +"inodes index" enabled will fail with EOPNOTSUPP if the lower filesystem +does not support NFS export, lower filesystem does not have a valid UUID or +if the upper filesystem does not support extended attributes. + +For "metadata only copy up" feature there is no verification mechanism at +mount time. So if same upper is mounted with different set of lower, mount +probably will succeed but expect the unexpected later on. So don't do it. + +It is quite a common practice to copy overlay layers to a different +directory tree on the same or different underlying filesystem, and even +to a different machine. With the "inodes index" feature, trying to mount +the copied layers will fail the verification of the lower root file handle. + + +Non-standard behavior +--------------------- + +Current version of overlayfs can act as a mostly POSIX compliant +filesystem. + +This is the list of cases that overlayfs doesn't currently handle: + +a) POSIX mandates updating st_atime for reads. This is currently not +done in the case when the file resides on a lower layer. + +b) If a file residing on a lower layer is opened for read-only and then +memory mapped with MAP_SHARED, then subsequent changes to the file are not +reflected in the memory mapping. + +The following options allow overlayfs to act more like a standards +compliant filesystem: + +1) "redirect_dir" + +Enabled with the mount option or module option: "redirect_dir=on" or with +the kernel config option CONFIG_OVERLAY_FS_REDIRECT_DIR=y. + +If this feature is disabled, then rename(2) on a lower or merged directory +will fail with EXDEV ("Invalid cross-device link"). + +2) "inode index" + +Enabled with the mount option or module option "index=on" or with the +kernel config option CONFIG_OVERLAY_FS_INDEX=y. + +If this feature is disabled and a file with multiple hard links is copied +up, then this will "break" the link. Changes will not be propagated to +other names referring to the same inode. + +3) "xino" + +Enabled with the mount option "xino=auto" or "xino=on", with the module +option "xino_auto=on" or with the kernel config option +CONFIG_OVERLAY_FS_XINO_AUTO=y. Also implicitly enabled by using the same +underlying filesystem for all layers making up the overlay. + +If this feature is disabled or the underlying filesystem doesn't have +enough free bits in the inode number, then overlayfs will not be able to +guarantee that the values of st_ino and st_dev returned by stat(2) and the +value of d_ino returned by readdir(3) will act like on a normal filesystem. +E.g. the value of st_dev may be different for two objects in the same +overlay filesystem and the value of st_ino for directory objects may not be +persistent and could change even while the overlay filesystem is mounted, as +summarized in the `Inode properties`_ table above. + + +Changes to underlying filesystems +--------------------------------- + +Offline changes, when the overlay is not mounted, are allowed to either +the upper or the lower trees. + +Changes to the underlying filesystems while part of a mounted overlay +filesystem are not allowed. If the underlying filesystem is changed, +the behavior of the overlay is undefined, though it will not result in +a crash or deadlock. + +When the overlay NFS export feature is enabled, overlay filesystems +behavior on offline changes of the underlying lower layer is different +than the behavior when NFS export is disabled. + +On every copy_up, an NFS file handle of the lower inode, along with the +UUID of the lower filesystem, are encoded and stored in an extended +attribute "trusted.overlay.origin" on the upper inode. + +When the NFS export feature is enabled, a lookup of a merged directory, +that found a lower directory at the lookup path or at the path pointed +to by the "trusted.overlay.redirect" extended attribute, will verify +that the found lower directory file handle and lower filesystem UUID +match the origin file handle that was stored at copy_up time. If a +found lower directory does not match the stored origin, that directory +will not be merged with the upper directory. + + + +NFS export +---------- + +When the underlying filesystems supports NFS export and the "nfs_export" +feature is enabled, an overlay filesystem may be exported to NFS. + +With the "nfs_export" feature, on copy_up of any lower object, an index +entry is created under the index directory. The index entry name is the +hexadecimal representation of the copy up origin file handle. For a +non-directory object, the index entry is a hard link to the upper inode. +For a directory object, the index entry has an extended attribute +"trusted.overlay.upper" with an encoded file handle of the upper +directory inode. + +When encoding a file handle from an overlay filesystem object, the +following rules apply: + +1. For a non-upper object, encode a lower file handle from lower inode +2. For an indexed object, encode a lower file handle from copy_up origin +3. For a pure-upper object and for an existing non-indexed upper object, + encode an upper file handle from upper inode + +The encoded overlay file handle includes: + - Header including path type information (e.g. lower/upper) + - UUID of the underlying filesystem + - Underlying filesystem encoding of underlying inode + +This encoding format is identical to the encoding format file handles that +are stored in extended attribute "trusted.overlay.origin". + +When decoding an overlay file handle, the following steps are followed: + +1. Find underlying layer by UUID and path type information. +2. Decode the underlying filesystem file handle to underlying dentry. +3. For a lower file handle, lookup the handle in index directory by name. +4. If a whiteout is found in index, return ESTALE. This represents an + overlay object that was deleted after its file handle was encoded. +5. For a non-directory, instantiate a disconnected overlay dentry from the + decoded underlying dentry, the path type and index inode, if found. +6. For a directory, use the connected underlying decoded dentry, path type + and index, to lookup a connected overlay dentry. + +Decoding a non-directory file handle may return a disconnected dentry. +copy_up of that disconnected dentry will create an upper index entry with +no upper alias. + +When overlay filesystem has multiple lower layers, a middle layer +directory may have a "redirect" to lower directory. Because middle layer +"redirects" are not indexed, a lower file handle that was encoded from the +"redirect" origin directory, cannot be used to find the middle or upper +layer directory. Similarly, a lower file handle that was encoded from a +descendant of the "redirect" origin directory, cannot be used to +reconstruct a connected overlay path. To mitigate the cases of +directories that cannot be decoded from a lower file handle, these +directories are copied up on encode and encoded as an upper file handle. +On an overlay filesystem with no upper layer this mitigation cannot be +used NFS export in this setup requires turning off redirect follow (e.g. +"redirect_dir=nofollow"). + +The overlay filesystem does not support non-directory connectable file +handles, so exporting with the 'subtree_check' exportfs configuration will +cause failures to lookup files over NFS. + +When the NFS export feature is enabled, all directory index entries are +verified on mount time to check that upper file handles are not stale. +This verification may cause significant overhead in some cases. + +Note: the mount options index=off,nfs_export=on are conflicting for a +read-write mount and will result in an error. + + +Volatile mount +-------------- + +This is enabled with the "volatile" mount option. Volatile mounts are not +guaranteed to survive a crash. It is strongly recommended that volatile +mounts are only used if data written to the overlay can be recreated +without significant effort. + +The advantage of mounting with the "volatile" option is that all forms of +sync calls to the upper filesystem are omitted. + +In order to avoid a giving a false sense of safety, the syncfs (and fsync) +semantics of volatile mounts are slightly different than that of the rest of +VFS. If any writeback error occurs on the upperdir's filesystem after a +volatile mount takes place, all sync functions will return an error. Once this +condition is reached, the filesystem will not recover, and every subsequent sync +call will return an error, even if the upperdir has not experience a new error +since the last sync call. + +When overlay is mounted with "volatile" option, the directory +"$workdir/work/incompat/volatile" is created. During next mount, overlay +checks for this directory and refuses to mount if present. This is a strong +indicator that user should throw away upper and work directories and create +fresh one. In very limited cases where the user knows that the system has +not crashed and contents of upperdir are intact, The "volatile" directory +can be removed. + +Testsuite +--------- + +There's a testsuite originally developed by David Howells and currently +maintained by Amir Goldstein at: + + https://github.com/amir73il/unionmount-testsuite.git + +Run as root: + + # cd unionmount-testsuite + # ./run --ov --verify diff --git a/Documentation/filesystems/path-lookup.rst b/Documentation/filesystems/path-lookup.rst new file mode 100644 index 000000000..c482e1619 --- /dev/null +++ b/Documentation/filesystems/path-lookup.rst @@ -0,0 +1,1414 @@ +=============== +Pathname lookup +=============== + +This write-up is based on three articles published at lwn.net: + +- <https://lwn.net/Articles/649115/> Pathname lookup in Linux +- <https://lwn.net/Articles/649729/> RCU-walk: faster pathname lookup in Linux +- <https://lwn.net/Articles/650786/> A walk among the symlinks + +Written by Neil Brown with help from Al Viro and Jon Corbet. +It has subsequently been updated to reflect changes in the kernel +including: + +- per-directory parallel name lookup. +- ``openat2()`` resolution restriction flags. + +Introduction to pathname lookup +=============================== + +The most obvious aspect of pathname lookup, which very little +exploration is needed to discover, is that it is complex. There are +many rules, special cases, and implementation alternatives that all +combine to confuse the unwary reader. Computer science has long been +acquainted with such complexity and has tools to help manage it. One +tool that we will make extensive use of is "divide and conquer". For +the early parts of the analysis we will divide off symlinks - leaving +them until the final part. Well before we get to symlinks we have +another major division based on the VFS's approach to locking which +will allow us to review "REF-walk" and "RCU-walk" separately. But we +are getting ahead of ourselves. There are some important low level +distinctions we need to clarify first. + +There are two sorts of ... +-------------------------- + +.. _openat: http://man7.org/linux/man-pages/man2/openat.2.html + +Pathnames (sometimes "file names"), used to identify objects in the +filesystem, will be familiar to most readers. They contain two sorts +of elements: "slashes" that are sequences of one or more "``/``" +characters, and "components" that are sequences of one or more +non-"``/``" characters. These form two kinds of paths. Those that +start with slashes are "absolute" and start from the filesystem root. +The others are "relative" and start from the current directory, or +from some other location specified by a file descriptor given to +"``*at()``" system calls such as `openat() <openat_>`_. + +.. _execveat: http://man7.org/linux/man-pages/man2/execveat.2.html + +It is tempting to describe the second kind as starting with a +component, but that isn't always accurate: a pathname can lack both +slashes and components, it can be empty, in other words. This is +generally forbidden in POSIX, but some of those "``*at()``" system calls +in Linux permit it when the ``AT_EMPTY_PATH`` flag is given. For +example, if you have an open file descriptor on an executable file you +can execute it by calling `execveat() <execveat_>`_ passing +the file descriptor, an empty path, and the ``AT_EMPTY_PATH`` flag. + +These paths can be divided into two sections: the final component and +everything else. The "everything else" is the easy bit. In all cases +it must identify a directory that already exists, otherwise an error +such as ``ENOENT`` or ``ENOTDIR`` will be reported. + +The final component is not so simple. Not only do different system +calls interpret it quite differently (e.g. some create it, some do +not), but it might not even exist: neither the empty pathname nor the +pathname that is just slashes have a final component. If it does +exist, it could be "``.``" or "``..``" which are handled quite differently +from other components. + +.. _POSIX: https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap04.html#tag_04_12 + +If a pathname ends with a slash, such as "``/tmp/foo/``" it might be +tempting to consider that to have an empty final component. In many +ways that would lead to correct results, but not always. In +particular, ``mkdir()`` and ``rmdir()`` each create or remove a directory named +by the final component, and they are required to work with pathnames +ending in "``/``". According to POSIX_: + + A pathname that contains at least one non-<slash> character and + that ends with one or more trailing <slash> characters shall not + be resolved successfully unless the last pathname component before + the trailing <slash> characters names an existing directory or a + directory entry that is to be created for a directory immediately + after the pathname is resolved. + +The Linux pathname walking code (mostly in ``fs/namei.c``) deals with +all of these issues: breaking the path into components, handling the +"everything else" quite separately from the final component, and +checking that the trailing slash is not used where it isn't +permitted. It also addresses the important issue of concurrent +access. + +While one process is looking up a pathname, another might be making +changes that affect that lookup. One fairly extreme case is that if +"a/b" were renamed to "a/c/b" while another process were looking up +"a/b/..", that process might successfully resolve on "a/c". +Most races are much more subtle, and a big part of the task of +pathname lookup is to prevent them from having damaging effects. Many +of the possible races are seen most clearly in the context of the +"dcache" and an understanding of that is central to understanding +pathname lookup. + +More than just a cache +---------------------- + +The "dcache" caches information about names in each filesystem to +make them quickly available for lookup. Each entry (known as a +"dentry") contains three significant fields: a component name, a +pointer to a parent dentry, and a pointer to the "inode" which +contains further information about the object in that parent with +the given name. The inode pointer can be ``NULL`` indicating that the +name doesn't exist in the parent. While there can be linkage in the +dentry of a directory to the dentries of the children, that linkage is +not used for pathname lookup, and so will not be considered here. + +The dcache has a number of uses apart from accelerating lookup. One +that will be particularly relevant is that it is closely integrated +with the mount table that records which filesystem is mounted where. +What the mount table actually stores is which dentry is mounted on top +of which other dentry. + +When considering the dcache, we have another of our "two types" +distinctions: there are two types of filesystems. + +Some filesystems ensure that the information in the dcache is always +completely accurate (though not necessarily complete). This can allow +the VFS to determine if a particular file does or doesn't exist +without checking with the filesystem, and means that the VFS can +protect the filesystem against certain races and other problems. +These are typically "local" filesystems such as ext3, XFS, and Btrfs. + +Other filesystems don't provide that guarantee because they cannot. +These are typically filesystems that are shared across a network, +whether remote filesystems like NFS and 9P, or cluster filesystems +like ocfs2 or cephfs. These filesystems allow the VFS to revalidate +cached information, and must provide their own protection against +awkward races. The VFS can detect these filesystems by the +``DCACHE_OP_REVALIDATE`` flag being set in the dentry. + +REF-walk: simple concurrency management with refcounts and spinlocks +-------------------------------------------------------------------- + +With all of those divisions carefully classified, we can now start +looking at the actual process of walking along a path. In particular +we will start with the handling of the "everything else" part of a +pathname, and focus on the "REF-walk" approach to concurrency +management. This code is found in the ``link_path_walk()`` function, if +you ignore all the places that only run when "``LOOKUP_RCU``" +(indicating the use of RCU-walk) is set. + +.. _Meet the Lockers: https://lwn.net/Articles/453685/ + +REF-walk is fairly heavy-handed with locks and reference counts. Not +as heavy-handed as in the old "big kernel lock" days, but certainly not +afraid of taking a lock when one is needed. It uses a variety of +different concurrency controls. A background understanding of the +various primitives is assumed, or can be gleaned from elsewhere such +as in `Meet the Lockers`_. + +The locking mechanisms used by REF-walk include: + +dentry->d_lockref +~~~~~~~~~~~~~~~~~ + +This uses the lockref primitive to provide both a spinlock and a +reference count. The special-sauce of this primitive is that the +conceptual sequence "lock; inc_ref; unlock;" can often be performed +with a single atomic memory operation. + +Holding a reference on a dentry ensures that the dentry won't suddenly +be freed and used for something else, so the values in various fields +will behave as expected. It also protects the ``->d_inode`` reference +to the inode to some extent. + +The association between a dentry and its inode is fairly permanent. +For example, when a file is renamed, the dentry and inode move +together to the new location. When a file is created the dentry will +initially be negative (i.e. ``d_inode`` is ``NULL``), and will be assigned +to the new inode as part of the act of creation. + +When a file is deleted, this can be reflected in the cache either by +setting ``d_inode`` to ``NULL``, or by removing it from the hash table +(described shortly) used to look up the name in the parent directory. +If the dentry is still in use the second option is used as it is +perfectly legal to keep using an open file after it has been deleted +and having the dentry around helps. If the dentry is not otherwise in +use (i.e. if the refcount in ``d_lockref`` is one), only then will +``d_inode`` be set to ``NULL``. Doing it this way is more efficient for a +very common case. + +So as long as a counted reference is held to a dentry, a non-``NULL`` ``->d_inode`` +value will never be changed. + +dentry->d_lock +~~~~~~~~~~~~~~ + +``d_lock`` is a synonym for the spinlock that is part of ``d_lockref`` above. +For our purposes, holding this lock protects against the dentry being +renamed or unlinked. In particular, its parent (``d_parent``), and its +name (``d_name``) cannot be changed, and it cannot be removed from the +dentry hash table. + +When looking for a name in a directory, REF-walk takes ``d_lock`` on +each candidate dentry that it finds in the hash table and then checks +that the parent and name are correct. So it doesn't lock the parent +while searching in the cache; it only locks children. + +When looking for the parent for a given name (to handle "``..``"), +REF-walk can take ``d_lock`` to get a stable reference to ``d_parent``, +but it first tries a more lightweight approach. As seen in +``dget_parent()``, if a reference can be claimed on the parent, and if +subsequently ``d_parent`` can be seen to have not changed, then there is +no need to actually take the lock on the child. + +rename_lock +~~~~~~~~~~~ + +Looking up a given name in a given directory involves computing a hash +from the two values (the name and the dentry of the directory), +accessing that slot in a hash table, and searching the linked list +that is found there. + +When a dentry is renamed, the name and the parent dentry can both +change so the hash will almost certainly change too. This would move the +dentry to a different chain in the hash table. If a filename search +happened to be looking at a dentry that was moved in this way, +it might end up continuing the search down the wrong chain, +and so miss out on part of the correct chain. + +The name-lookup process (``d_lookup()``) does *not* try to prevent this +from happening, but only to detect when it happens. +``rename_lock`` is a seqlock that is updated whenever any dentry is +renamed. If ``d_lookup`` finds that a rename happened while it +unsuccessfully scanned a chain in the hash table, it simply tries +again. + +``rename_lock`` is also used to detect and defend against potential attacks +against ``LOOKUP_BENEATH`` and ``LOOKUP_IN_ROOT`` when resolving ".." (where +the parent directory is moved outside the root, bypassing the ``path_equal()`` +check). If ``rename_lock`` is updated during the lookup and the path encounters +a "..", a potential attack occurred and ``handle_dots()`` will bail out with +``-EAGAIN``. + +inode->i_rwsem +~~~~~~~~~~~~~~ + +``i_rwsem`` is a read/write semaphore that serializes all changes to a particular +directory. This ensures that, for example, an ``unlink()`` and a ``rename()`` +cannot both happen at the same time. It also keeps the directory +stable while the filesystem is asked to look up a name that is not +currently in the dcache or, optionally, when the list of entries in a +directory is being retrieved with ``readdir()``. + +This has a complementary role to that of ``d_lock``: ``i_rwsem`` on a +directory protects all of the names in that directory, while ``d_lock`` +on a name protects just one name in a directory. Most changes to the +dcache hold ``i_rwsem`` on the relevant directory inode and briefly take +``d_lock`` on one or more the dentries while the change happens. One +exception is when idle dentries are removed from the dcache due to +memory pressure. This uses ``d_lock``, but ``i_rwsem`` plays no role. + +The semaphore affects pathname lookup in two distinct ways. Firstly it +prevents changes during lookup of a name in a directory. ``walk_component()`` uses +``lookup_fast()`` first which, in turn, checks to see if the name is in the cache, +using only ``d_lock`` locking. If the name isn't found, then ``walk_component()`` +falls back to ``lookup_slow()`` which takes a shared lock on ``i_rwsem``, checks again that +the name isn't in the cache, and then calls in to the filesystem to get a +definitive answer. A new dentry will be added to the cache regardless of +the result. + +Secondly, when pathname lookup reaches the final component, it will +sometimes need to take an exclusive lock on ``i_rwsem`` before performing the last lookup so +that the required exclusion can be achieved. How path lookup chooses +to take, or not take, ``i_rwsem`` is one of the +issues addressed in a subsequent section. + +If two threads attempt to look up the same name at the same time - a +name that is not yet in the dcache - the shared lock on ``i_rwsem`` will +not prevent them both adding new dentries with the same name. As this +would result in confusion an extra level of interlocking is used, +based around a secondary hash table (``in_lookup_hashtable``) and a +per-dentry flag bit (``DCACHE_PAR_LOOKUP``). + +To add a new dentry to the cache while only holding a shared lock on +``i_rwsem``, a thread must call ``d_alloc_parallel()``. This allocates a +dentry, stores the required name and parent in it, checks if there +is already a matching dentry in the primary or secondary hash +tables, and if not, stores the newly allocated dentry in the secondary +hash table, with ``DCACHE_PAR_LOOKUP`` set. + +If a matching dentry was found in the primary hash table then that is +returned and the caller can know that it lost a race with some other +thread adding the entry. If no matching dentry is found in either +cache, the newly allocated dentry is returned and the caller can +detect this from the presence of ``DCACHE_PAR_LOOKUP``. In this case it +knows that it has won any race and now is responsible for asking the +filesystem to perform the lookup and find the matching inode. When +the lookup is complete, it must call ``d_lookup_done()`` which clears +the flag and does some other house keeping, including removing the +dentry from the secondary hash table - it will normally have been +added to the primary hash table already. Note that a ``struct +waitqueue_head`` is passed to ``d_alloc_parallel()``, and +``d_lookup_done()`` must be called while this ``waitqueue_head`` is still +in scope. + +If a matching dentry is found in the secondary hash table, +``d_alloc_parallel()`` has a little more work to do. It first waits for +``DCACHE_PAR_LOOKUP`` to be cleared, using a wait_queue that was passed +to the instance of ``d_alloc_parallel()`` that won the race and that +will be woken by the call to ``d_lookup_done()``. It then checks to see +if the dentry has now been added to the primary hash table. If it +has, the dentry is returned and the caller just sees that it lost any +race. If it hasn't been added to the primary hash table, the most +likely explanation is that some other dentry was added instead using +``d_splice_alias()``. In any case, ``d_alloc_parallel()`` repeats all the +look ups from the start and will normally return something from the +primary hash table. + +mnt->mnt_count +~~~~~~~~~~~~~~ + +``mnt_count`` is a per-CPU reference counter on "``mount``" structures. +Per-CPU here means that incrementing the count is cheap as it only +uses CPU-local memory, but checking if the count is zero is expensive as +it needs to check with every CPU. Taking a ``mnt_count`` reference +prevents the mount structure from disappearing as the result of regular +unmount operations, but does not prevent a "lazy" unmount. So holding +``mnt_count`` doesn't ensure that the mount remains in the namespace and, +in particular, doesn't stabilize the link to the mounted-on dentry. It +does, however, ensure that the ``mount`` data structure remains coherent, +and it provides a reference to the root dentry of the mounted +filesystem. So a reference through ``->mnt_count`` provides a stable +reference to the mounted dentry, but not the mounted-on dentry. + +mount_lock +~~~~~~~~~~ + +``mount_lock`` is a global seqlock, a bit like ``rename_lock``. It can be used to +check if any change has been made to any mount points. + +While walking down the tree (away from the root) this lock is used when +crossing a mount point to check that the crossing was safe. That is, +the value in the seqlock is read, then the code finds the mount that +is mounted on the current directory, if there is one, and increments +the ``mnt_count``. Finally the value in ``mount_lock`` is checked against +the old value. If there is no change, then the crossing was safe. If there +was a change, the ``mnt_count`` is decremented and the whole process is +retried. + +When walking up the tree (towards the root) by following a ".." link, +a little more care is needed. In this case the seqlock (which +contains both a counter and a spinlock) is fully locked to prevent +any changes to any mount points while stepping up. This locking is +needed to stabilize the link to the mounted-on dentry, which the +refcount on the mount itself doesn't ensure. + +``mount_lock`` is also used to detect and defend against potential attacks +against ``LOOKUP_BENEATH`` and ``LOOKUP_IN_ROOT`` when resolving ".." (where +the parent directory is moved outside the root, bypassing the ``path_equal()`` +check). If ``mount_lock`` is updated during the lookup and the path encounters +a "..", a potential attack occurred and ``handle_dots()`` will bail out with +``-EAGAIN``. + +RCU +~~~ + +Finally the global (but extremely lightweight) RCU read lock is held +from time to time to ensure certain data structures don't get freed +unexpectedly. + +In particular it is held while scanning chains in the dcache hash +table, and the mount point hash table. + +Bringing it together with ``struct nameidata`` +---------------------------------------------- + +.. _First edition Unix: https://minnie.tuhs.org/cgi-bin/utree.pl?file=V1/u2.s + +Throughout the process of walking a path, the current status is stored +in a ``struct nameidata``, "namei" being the traditional name - dating +all the way back to `First Edition Unix`_ - of the function that +converts a "name" to an "inode". ``struct nameidata`` contains (among +other fields): + +``struct path path`` +~~~~~~~~~~~~~~~~~~~~ + +A ``path`` contains a ``struct vfsmount`` (which is +embedded in a ``struct mount``) and a ``struct dentry``. Together these +record the current status of the walk. They start out referring to the +starting point (the current working directory, the root directory, or some other +directory identified by a file descriptor), and are updated on each +step. A reference through ``d_lockref`` and ``mnt_count`` is always +held. + +``struct qstr last`` +~~~~~~~~~~~~~~~~~~~~ + +This is a string together with a length (i.e. *not* ``nul`` terminated) +that is the "next" component in the pathname. + +``int last_type`` +~~~~~~~~~~~~~~~~~ + +This is one of ``LAST_NORM``, ``LAST_ROOT``, ``LAST_DOT`` or ``LAST_DOTDOT``. +The ``last`` field is only valid if the type is ``LAST_NORM``. + +``struct path root`` +~~~~~~~~~~~~~~~~~~~~ + +This is used to hold a reference to the effective root of the +filesystem. Often that reference won't be needed, so this field is +only assigned the first time it is used, or when a non-standard root +is requested. Keeping a reference in the ``nameidata`` ensures that +only one root is in effect for the entire path walk, even if it races +with a ``chroot()`` system call. + +It should be noted that in the case of ``LOOKUP_IN_ROOT`` or +``LOOKUP_BENEATH``, the effective root becomes the directory file descriptor +passed to ``openat2()`` (which exposes these ``LOOKUP_`` flags). + +The root is needed when either of two conditions holds: (1) either the +pathname or a symbolic link starts with a "'/'", or (2) a "``..``" +component is being handled, since "``..``" from the root must always stay +at the root. The value used is usually the current root directory of +the calling process. An alternate root can be provided as when +``sysctl()`` calls ``file_open_root()``, and when NFSv4 or Btrfs call +``mount_subtree()``. In each case a pathname is being looked up in a very +specific part of the filesystem, and the lookup must not be allowed to +escape that subtree. It works a bit like a local ``chroot()``. + +Ignoring the handling of symbolic links, we can now describe the +"``link_path_walk()``" function, which handles the lookup of everything +except the final component as: + + Given a path (``name``) and a nameidata structure (``nd``), check that the + current directory has execute permission and then advance ``name`` + over one component while updating ``last_type`` and ``last``. If that + was the final component, then return, otherwise call + ``walk_component()`` and repeat from the top. + +``walk_component()`` is even easier. If the component is ``LAST_DOTS``, +it calls ``handle_dots()`` which does the necessary locking as already +described. If it finds a ``LAST_NORM`` component it first calls +"``lookup_fast()``" which only looks in the dcache, but will ask the +filesystem to revalidate the result if it is that sort of filesystem. +If that doesn't get a good result, it calls "``lookup_slow()``" which +takes ``i_rwsem``, rechecks the cache, and then asks the filesystem +to find a definitive answer. Each of these will call +``follow_managed()`` (as described below) to handle any mount points. + +In the absence of symbolic links, ``walk_component()`` creates a new +``struct path`` containing a counted reference to the new dentry and a +reference to the new ``vfsmount`` which is only counted if it is +different from the previous ``vfsmount``. It then calls +``path_to_nameidata()`` to install the new ``struct path`` in the +``struct nameidata`` and drop the unneeded references. + +This "hand-over-hand" sequencing of getting a reference to the new +dentry before dropping the reference to the previous dentry may +seem obvious, but is worth pointing out so that we will recognize its +analogue in the "RCU-walk" version. + +Handling the final component +---------------------------- + +``link_path_walk()`` only walks as far as setting ``nd->last`` and +``nd->last_type`` to refer to the final component of the path. It does +not call ``walk_component()`` that last time. Handling that final +component remains for the caller to sort out. Those callers are +``path_lookupat()``, ``path_parentat()``, ``path_mountpoint()`` and +``path_openat()`` each of which handles the differing requirements of +different system calls. + +``path_parentat()`` is clearly the simplest - it just wraps a little bit +of housekeeping around ``link_path_walk()`` and returns the parent +directory and final component to the caller. The caller will be either +aiming to create a name (via ``filename_create()``) or remove or rename +a name (in which case ``user_path_parent()`` is used). They will use +``i_rwsem`` to exclude other changes while they validate and then +perform their operation. + +``path_lookupat()`` is nearly as simple - it is used when an existing +object is wanted such as by ``stat()`` or ``chmod()``. It essentially just +calls ``walk_component()`` on the final component through a call to +``lookup_last()``. ``path_lookupat()`` returns just the final dentry. + +``path_mountpoint()`` handles the special case of unmounting which must +not try to revalidate the mounted filesystem. It effectively +contains, through a call to ``mountpoint_last()``, an alternate +implementation of ``lookup_slow()`` which skips that step. This is +important when unmounting a filesystem that is inaccessible, such as +one provided by a dead NFS server. + +Finally ``path_openat()`` is used for the ``open()`` system call; it +contains, in support functions starting with "``do_last()``", all the +complexity needed to handle the different subtleties of O_CREAT (with +or without O_EXCL), final "``/``" characters, and trailing symbolic +links. We will revisit this in the final part of this series, which +focuses on those symbolic links. "``do_last()``" will sometimes, but +not always, take ``i_rwsem``, depending on what it finds. + +Each of these, or the functions which call them, need to be alert to +the possibility that the final component is not ``LAST_NORM``. If the +goal of the lookup is to create something, then any value for +``last_type`` other than ``LAST_NORM`` will result in an error. For +example if ``path_parentat()`` reports ``LAST_DOTDOT``, then the caller +won't try to create that name. They also check for trailing slashes +by testing ``last.name[last.len]``. If there is any character beyond +the final component, it must be a trailing slash. + +Revalidation and automounts +--------------------------- + +Apart from symbolic links, there are only two parts of the "REF-walk" +process not yet covered. One is the handling of stale cache entries +and the other is automounts. + +On filesystems that require it, the lookup routines will call the +``->d_revalidate()`` dentry method to ensure that the cached information +is current. This will often confirm validity or update a few details +from a server. In some cases it may find that there has been change +further up the path and that something that was thought to be valid +previously isn't really. When this happens the lookup of the whole +path is aborted and retried with the "``LOOKUP_REVAL``" flag set. This +forces revalidation to be more thorough. We will see more details of +this retry process in the next article. + +Automount points are locations in the filesystem where an attempt to +lookup a name can trigger changes to how that lookup should be +handled, in particular by mounting a filesystem there. These are +covered in greater detail in autofs.txt in the Linux documentation +tree, but a few notes specifically related to path lookup are in order +here. + +The Linux VFS has a concept of "managed" dentries which is reflected +in function names such as "``follow_managed()``". There are three +potentially interesting things about these dentries corresponding +to three different flags that might be set in ``dentry->d_flags``: + +``DCACHE_MANAGE_TRANSIT`` +~~~~~~~~~~~~~~~~~~~~~~~~~ + +If this flag has been set, then the filesystem has requested that the +``d_manage()`` dentry operation be called before handling any possible +mount point. This can perform two particular services: + +It can block to avoid races. If an automount point is being +unmounted, the ``d_manage()`` function will usually wait for that +process to complete before letting the new lookup proceed and possibly +trigger a new automount. + +It can selectively allow only some processes to transit through a +mount point. When a server process is managing automounts, it may +need to access a directory without triggering normal automount +processing. That server process can identify itself to the ``autofs`` +filesystem, which will then give it a special pass through +``d_manage()`` by returning ``-EISDIR``. + +``DCACHE_MOUNTED`` +~~~~~~~~~~~~~~~~~~ + +This flag is set on every dentry that is mounted on. As Linux +supports multiple filesystem namespaces, it is possible that the +dentry may not be mounted on in *this* namespace, just in some +other. So this flag is seen as a hint, not a promise. + +If this flag is set, and ``d_manage()`` didn't return ``-EISDIR``, +``lookup_mnt()`` is called to examine the mount hash table (honoring the +``mount_lock`` described earlier) and possibly return a new ``vfsmount`` +and a new ``dentry`` (both with counted references). + +``DCACHE_NEED_AUTOMOUNT`` +~~~~~~~~~~~~~~~~~~~~~~~~~ + +If ``d_manage()`` allowed us to get this far, and ``lookup_mnt()`` didn't +find a mount point, then this flag causes the ``d_automount()`` dentry +operation to be called. + +The ``d_automount()`` operation can be arbitrarily complex and may +communicate with server processes etc. but it should ultimately either +report that there was an error, that there was nothing to mount, or +should provide an updated ``struct path`` with new ``dentry`` and ``vfsmount``. + +In the latter case, ``finish_automount()`` will be called to safely +install the new mount point into the mount table. + +There is no new locking of import here and it is important that no +locks (only counted references) are held over this processing due to +the very real possibility of extended delays. +This will become more important next time when we examine RCU-walk +which is particularly sensitive to delays. + +RCU-walk - faster pathname lookup in Linux +========================================== + +RCU-walk is another algorithm for performing pathname lookup in Linux. +It is in many ways similar to REF-walk and the two share quite a bit +of code. The significant difference in RCU-walk is how it allows for +the possibility of concurrent access. + +We noted that REF-walk is complex because there are numerous details +and special cases. RCU-walk reduces this complexity by simply +refusing to handle a number of cases -- it instead falls back to +REF-walk. The difficulty with RCU-walk comes from a different +direction: unfamiliarity. The locking rules when depending on RCU are +quite different from traditional locking, so we will spend a little extra +time when we come to those. + +Clear demarcation of roles +-------------------------- + +The easiest way to manage concurrency is to forcibly stop any other +thread from changing the data structures that a given thread is +looking at. In cases where no other thread would even think of +changing the data and lots of different threads want to read at the +same time, this can be very costly. Even when using locks that permit +multiple concurrent readers, the simple act of updating the count of +the number of current readers can impose an unwanted cost. So the +goal when reading a shared data structure that no other process is +changing is to avoid writing anything to memory at all. Take no +locks, increment no counts, leave no footprints. + +The REF-walk mechanism already described certainly doesn't follow this +principle, but then it is really designed to work when there may well +be other threads modifying the data. RCU-walk, in contrast, is +designed for the common situation where there are lots of frequent +readers and only occasional writers. This may not be common in all +parts of the filesystem tree, but in many parts it will be. For the +other parts it is important that RCU-walk can quickly fall back to +using REF-walk. + +Pathname lookup always starts in RCU-walk mode but only remains there +as long as what it is looking for is in the cache and is stable. It +dances lightly down the cached filesystem image, leaving no footprints +and carefully watching where it is, to be sure it doesn't trip. If it +notices that something has changed or is changing, or if something +isn't in the cache, then it tries to stop gracefully and switch to +REF-walk. + +This stopping requires getting a counted reference on the current +``vfsmount`` and ``dentry``, and ensuring that these are still valid - +that a path walk with REF-walk would have found the same entries. +This is an invariant that RCU-walk must guarantee. It can only make +decisions, such as selecting the next step, that are decisions which +REF-walk could also have made if it were walking down the tree at the +same time. If the graceful stop succeeds, the rest of the path is +processed with the reliable, if slightly sluggish, REF-walk. If +RCU-walk finds it cannot stop gracefully, it simply gives up and +restarts from the top with REF-walk. + +This pattern of "try RCU-walk, if that fails try REF-walk" can be +clearly seen in functions like ``filename_lookup()``, +``filename_parentat()``, ``filename_mountpoint()``, +``do_filp_open()``, and ``do_file_open_root()``. These five +correspond roughly to the four ``path_*()`` functions we met earlier, +each of which calls ``link_path_walk()``. The ``path_*()`` functions are +called using different mode flags until a mode is found which works. +They are first called with ``LOOKUP_RCU`` set to request "RCU-walk". If +that fails with the error ``ECHILD`` they are called again with no +special flag to request "REF-walk". If either of those report the +error ``ESTALE`` a final attempt is made with ``LOOKUP_REVAL`` set (and no +``LOOKUP_RCU``) to ensure that entries found in the cache are forcibly +revalidated - normally entries are only revalidated if the filesystem +determines that they are too old to trust. + +The ``LOOKUP_RCU`` attempt may drop that flag internally and switch to +REF-walk, but will never then try to switch back to RCU-walk. Places +that trip up RCU-walk are much more likely to be near the leaves and +so it is very unlikely that there will be much, if any, benefit from +switching back. + +RCU and seqlocks: fast and light +-------------------------------- + +RCU is, unsurprisingly, critical to RCU-walk mode. The +``rcu_read_lock()`` is held for the entire time that RCU-walk is walking +down a path. The particular guarantee it provides is that the key +data structures - dentries, inodes, super_blocks, and mounts - will +not be freed while the lock is held. They might be unlinked or +invalidated in one way or another, but the memory will not be +repurposed so values in various fields will still be meaningful. This +is the only guarantee that RCU provides; everything else is done using +seqlocks. + +As we saw above, REF-walk holds a counted reference to the current +dentry and the current vfsmount, and does not release those references +before taking references to the "next" dentry or vfsmount. It also +sometimes takes the ``d_lock`` spinlock. These references and locks are +taken to prevent certain changes from happening. RCU-walk must not +take those references or locks and so cannot prevent such changes. +Instead, it checks to see if a change has been made, and aborts or +retries if it has. + +To preserve the invariant mentioned above (that RCU-walk may only make +decisions that REF-walk could have made), it must make the checks at +or near the same places that REF-walk holds the references. So, when +REF-walk increments a reference count or takes a spinlock, RCU-walk +samples the status of a seqlock using ``read_seqcount_begin()`` or a +similar function. When REF-walk decrements the count or drops the +lock, RCU-walk checks if the sampled status is still valid using +``read_seqcount_retry()`` or similar. + +However, there is a little bit more to seqlocks than that. If +RCU-walk accesses two different fields in a seqlock-protected +structure, or accesses the same field twice, there is no a priori +guarantee of any consistency between those accesses. When consistency +is needed - which it usually is - RCU-walk must take a copy and then +use ``read_seqcount_retry()`` to validate that copy. + +``read_seqcount_retry()`` not only checks the sequence number, but also +imposes a memory barrier so that no memory-read instruction from +*before* the call can be delayed until *after* the call, either by the +CPU or by the compiler. A simple example of this can be seen in +``slow_dentry_cmp()`` which, for filesystems which do not use simple +byte-wise name equality, calls into the filesystem to compare a name +against a dentry. The length and name pointer are copied into local +variables, then ``read_seqcount_retry()`` is called to confirm the two +are consistent, and only then is ``->d_compare()`` called. When +standard filename comparison is used, ``dentry_cmp()`` is called +instead. Notably it does *not* use ``read_seqcount_retry()``, but +instead has a large comment explaining why the consistency guarantee +isn't necessary. A subsequent ``read_seqcount_retry()`` will be +sufficient to catch any problem that could occur at this point. + +With that little refresher on seqlocks out of the way we can look at +the bigger picture of how RCU-walk uses seqlocks. + +``mount_lock`` and ``nd->m_seq`` +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +We already met the ``mount_lock`` seqlock when REF-walk used it to +ensure that crossing a mount point is performed safely. RCU-walk uses +it for that too, but for quite a bit more. + +Instead of taking a counted reference to each ``vfsmount`` as it +descends the tree, RCU-walk samples the state of ``mount_lock`` at the +start of the walk and stores this initial sequence number in the +``struct nameidata`` in the ``m_seq`` field. This one lock and one +sequence number are used to validate all accesses to all ``vfsmounts``, +and all mount point crossings. As changes to the mount table are +relatively rare, it is reasonable to fall back on REF-walk any time +that any "mount" or "unmount" happens. + +``m_seq`` is checked (using ``read_seqretry()``) at the end of an RCU-walk +sequence, whether switching to REF-walk for the rest of the path or +when the end of the path is reached. It is also checked when stepping +down over a mount point (in ``__follow_mount_rcu()``) or up (in +``follow_dotdot_rcu()``). If it is ever found to have changed, the +whole RCU-walk sequence is aborted and the path is processed again by +REF-walk. + +If RCU-walk finds that ``mount_lock`` hasn't changed then it can be sure +that, had REF-walk taken counted references on each vfsmount, the +results would have been the same. This ensures the invariant holds, +at least for vfsmount structures. + +``dentry->d_seq`` and ``nd->seq`` +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +In place of taking a count or lock on ``d_reflock``, RCU-walk samples +the per-dentry ``d_seq`` seqlock, and stores the sequence number in the +``seq`` field of the nameidata structure, so ``nd->seq`` should always be +the current sequence number of ``nd->dentry``. This number needs to be +revalidated after copying, and before using, the name, parent, or +inode of the dentry. + +The handling of the name we have already looked at, and the parent is +only accessed in ``follow_dotdot_rcu()`` which fairly trivially follows +the required pattern, though it does so for three different cases. + +When not at a mount point, ``d_parent`` is followed and its ``d_seq`` is +collected. When we are at a mount point, we instead follow the +``mnt->mnt_mountpoint`` link to get a new dentry and collect its +``d_seq``. Then, after finally finding a ``d_parent`` to follow, we must +check if we have landed on a mount point and, if so, must find that +mount point and follow the ``mnt->mnt_root`` link. This would imply a +somewhat unusual, but certainly possible, circumstance where the +starting point of the path lookup was in part of the filesystem that +was mounted on, and so not visible from the root. + +The inode pointer, stored in ``->d_inode``, is a little more +interesting. The inode will always need to be accessed at least +twice, once to determine if it is NULL and once to verify access +permissions. Symlink handling requires a validated inode pointer too. +Rather than revalidating on each access, a copy is made on the first +access and it is stored in the ``inode`` field of ``nameidata`` from where +it can be safely accessed without further validation. + +``lookup_fast()`` is the only lookup routine that is used in RCU-mode, +``lookup_slow()`` being too slow and requiring locks. It is in +``lookup_fast()`` that we find the important "hand over hand" tracking +of the current dentry. + +The current ``dentry`` and current ``seq`` number are passed to +``__d_lookup_rcu()`` which, on success, returns a new ``dentry`` and a +new ``seq`` number. ``lookup_fast()`` then copies the inode pointer and +revalidates the new ``seq`` number. It then validates the old ``dentry`` +with the old ``seq`` number one last time and only then continues. This +process of getting the ``seq`` number of the new dentry and then +checking the ``seq`` number of the old exactly mirrors the process of +getting a counted reference to the new dentry before dropping that for +the old dentry which we saw in REF-walk. + +No ``inode->i_rwsem`` or even ``rename_lock`` +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +A semaphore is a fairly heavyweight lock that can only be taken when it is +permissible to sleep. As ``rcu_read_lock()`` forbids sleeping, +``inode->i_rwsem`` plays no role in RCU-walk. If some other thread does +take ``i_rwsem`` and modifies the directory in a way that RCU-walk needs +to notice, the result will be either that RCU-walk fails to find the +dentry that it is looking for, or it will find a dentry which +``read_seqretry()`` won't validate. In either case it will drop down to +REF-walk mode which can take whatever locks are needed. + +Though ``rename_lock`` could be used by RCU-walk as it doesn't require +any sleeping, RCU-walk doesn't bother. REF-walk uses ``rename_lock`` to +protect against the possibility of hash chains in the dcache changing +while they are being searched. This can result in failing to find +something that actually is there. When RCU-walk fails to find +something in the dentry cache, whether it is really there or not, it +already drops down to REF-walk and tries again with appropriate +locking. This neatly handles all cases, so adding extra checks on +rename_lock would bring no significant value. + +``unlazy walk()`` and ``complete_walk()`` +----------------------------------------- + +That "dropping down to REF-walk" typically involves a call to +``unlazy_walk()``, so named because "RCU-walk" is also sometimes +referred to as "lazy walk". ``unlazy_walk()`` is called when +following the path down to the current vfsmount/dentry pair seems to +have proceeded successfully, but the next step is problematic. This +can happen if the next name cannot be found in the dcache, if +permission checking or name revalidation couldn't be achieved while +the ``rcu_read_lock()`` is held (which forbids sleeping), if an +automount point is found, or in a couple of cases involving symlinks. +It is also called from ``complete_walk()`` when the lookup has reached +the final component, or the very end of the path, depending on which +particular flavor of lookup is used. + +Other reasons for dropping out of RCU-walk that do not trigger a call +to ``unlazy_walk()`` are when some inconsistency is found that cannot be +handled immediately, such as ``mount_lock`` or one of the ``d_seq`` +seqlocks reporting a change. In these cases the relevant function +will return ``-ECHILD`` which will percolate up until it triggers a new +attempt from the top using REF-walk. + +For those cases where ``unlazy_walk()`` is an option, it essentially +takes a reference on each of the pointers that it holds (vfsmount, +dentry, and possibly some symbolic links) and then verifies that the +relevant seqlocks have not been changed. If there have been changes, +it, too, aborts with ``-ECHILD``, otherwise the transition to REF-walk +has been a success and the lookup process continues. + +Taking a reference on those pointers is not quite as simple as just +incrementing a counter. That works to take a second reference if you +already have one (often indirectly through another object), but it +isn't sufficient if you don't actually have a counted reference at +all. For ``dentry->d_lockref``, it is safe to increment the reference +counter to get a reference unless it has been explicitly marked as +"dead" which involves setting the counter to ``-128``. +``lockref_get_not_dead()`` achieves this. + +For ``mnt->mnt_count`` it is safe to take a reference as long as +``mount_lock`` is then used to validate the reference. If that +validation fails, it may *not* be safe to just drop that reference in +the standard way of calling ``mnt_put()`` - an unmount may have +progressed too far. So the code in ``legitimize_mnt()``, when it +finds that the reference it got might not be safe, checks the +``MNT_SYNC_UMOUNT`` flag to determine if a simple ``mnt_put()`` is +correct, or if it should just decrement the count and pretend none of +this ever happened. + +Taking care in filesystems +-------------------------- + +RCU-walk depends almost entirely on cached information and often will +not call into the filesystem at all. However there are two places, +besides the already-mentioned component-name comparison, where the +file system might be included in RCU-walk, and it must know to be +careful. + +If the filesystem has non-standard permission-checking requirements - +such as a networked filesystem which may need to check with the server +- the ``i_op->permission`` interface might be called during RCU-walk. +In this case an extra "``MAY_NOT_BLOCK``" flag is passed so that it +knows not to sleep, but to return ``-ECHILD`` if it cannot complete +promptly. ``i_op->permission`` is given the inode pointer, not the +dentry, so it doesn't need to worry about further consistency checks. +However if it accesses any other filesystem data structures, it must +ensure they are safe to be accessed with only the ``rcu_read_lock()`` +held. This typically means they must be freed using ``kfree_rcu()`` or +similar. + +.. _READ_ONCE: https://lwn.net/Articles/624126/ + +If the filesystem may need to revalidate dcache entries, then +``d_op->d_revalidate`` may be called in RCU-walk too. This interface +*is* passed the dentry but does not have access to the ``inode`` or the +``seq`` number from the ``nameidata``, so it needs to be extra careful +when accessing fields in the dentry. This "extra care" typically +involves using `READ_ONCE() <READ_ONCE_>`_ to access fields, and verifying the +result is not NULL before using it. This pattern can be seen in +``nfs_lookup_revalidate()``. + +A pair of patterns +------------------ + +In various places in the details of REF-walk and RCU-walk, and also in +the big picture, there are a couple of related patterns that are worth +being aware of. + +The first is "try quickly and check, if that fails try slowly". We +can see that in the high-level approach of first trying RCU-walk and +then trying REF-walk, and in places where ``unlazy_walk()`` is used to +switch to REF-walk for the rest of the path. We also saw it earlier +in ``dget_parent()`` when following a "``..``" link. It tries a quick way +to get a reference, then falls back to taking locks if needed. + +The second pattern is "try quickly and check, if that fails try +again - repeatedly". This is seen with the use of ``rename_lock`` and +``mount_lock`` in REF-walk. RCU-walk doesn't make use of this pattern - +if anything goes wrong it is much safer to just abort and try a more +sedate approach. + +The emphasis here is "try quickly and check". It should probably be +"try quickly *and carefully*, then check". The fact that checking is +needed is a reminder that the system is dynamic and only a limited +number of things are safe at all. The most likely cause of errors in +this whole process is assuming something is safe when in reality it +isn't. Careful consideration of what exactly guarantees the safety of +each access is sometimes necessary. + +A walk among the symlinks +========================= + +There are several basic issues that we will examine to understand the +handling of symbolic links: the symlink stack, together with cache +lifetimes, will help us understand the overall recursive handling of +symlinks and lead to the special care needed for the final component. +Then a consideration of access-time updates and summary of the various +flags controlling lookup will finish the story. + +The symlink stack +----------------- + +There are only two sorts of filesystem objects that can usefully +appear in a path prior to the final component: directories and symlinks. +Handling directories is quite straightforward: the new directory +simply becomes the starting point at which to interpret the next +component on the path. Handling symbolic links requires a bit more +work. + +Conceptually, symbolic links could be handled by editing the path. If +a component name refers to a symbolic link, then that component is +replaced by the body of the link and, if that body starts with a '/', +then all preceding parts of the path are discarded. This is what the +"``readlink -f``" command does, though it also edits out "``.``" and +"``..``" components. + +Directly editing the path string is not really necessary when looking +up a path, and discarding early components is pointless as they aren't +looked at anyway. Keeping track of all remaining components is +important, but they can of course be kept separately; there is no need +to concatenate them. As one symlink may easily refer to another, +which in turn can refer to a third, we may need to keep the remaining +components of several paths, each to be processed when the preceding +ones are completed. These path remnants are kept on a stack of +limited size. + +There are two reasons for placing limits on how many symlinks can +occur in a single path lookup. The most obvious is to avoid loops. +If a symlink referred to itself either directly or through +intermediaries, then following the symlink can never complete +successfully - the error ``ELOOP`` must be returned. Loops can be +detected without imposing limits, but limits are the simplest solution +and, given the second reason for restriction, quite sufficient. + +.. _outlined recently: http://thread.gmane.org/gmane.linux.kernel/1934390/focus=1934550 + +The second reason was `outlined recently`_ by Linus: + + Because it's a latency and DoS issue too. We need to react well to + true loops, but also to "very deep" non-loops. It's not about memory + use, it's about users triggering unreasonable CPU resources. + +Linux imposes a limit on the length of any pathname: ``PATH_MAX``, which +is 4096. There are a number of reasons for this limit; not letting the +kernel spend too much time on just one path is one of them. With +symbolic links you can effectively generate much longer paths so some +sort of limit is needed for the same reason. Linux imposes a limit of +at most 40 symlinks in any one path lookup. It previously imposed a +further limit of eight on the maximum depth of recursion, but that was +raised to 40 when a separate stack was implemented, so there is now +just the one limit. + +The ``nameidata`` structure that we met in an earlier article contains a +small stack that can be used to store the remaining part of up to two +symlinks. In many cases this will be sufficient. If it isn't, a +separate stack is allocated with room for 40 symlinks. Pathname +lookup will never exceed that stack as, once the 40th symlink is +detected, an error is returned. + +It might seem that the name remnants are all that needs to be stored on +this stack, but we need a bit more. To see that, we need to move on to +cache lifetimes. + +Storage and lifetime of cached symlinks +--------------------------------------- + +Like other filesystem resources, such as inodes and directory +entries, symlinks are cached by Linux to avoid repeated costly access +to external storage. It is particularly important for RCU-walk to be +able to find and temporarily hold onto these cached entries, so that +it doesn't need to drop down into REF-walk. + +.. _object-oriented design pattern: https://lwn.net/Articles/446317/ + +While each filesystem is free to make its own choice, symlinks are +typically stored in one of two places. Short symlinks are often +stored directly in the inode. When a filesystem allocates a ``struct +inode`` it typically allocates extra space to store private data (a +common `object-oriented design pattern`_ in the kernel). This will +sometimes include space for a symlink. The other common location is +in the page cache, which normally stores the content of files. The +pathname in a symlink can be seen as the content of that symlink and +can easily be stored in the page cache just like file content. + +When neither of these is suitable, the next most likely scenario is +that the filesystem will allocate some temporary memory and copy or +construct the symlink content into that memory whenever it is needed. + +When the symlink is stored in the inode, it has the same lifetime as +the inode which, itself, is protected by RCU or by a counted reference +on the dentry. This means that the mechanisms that pathname lookup +uses to access the dcache and icache (inode cache) safely are quite +sufficient for accessing some cached symlinks safely. In these cases, +the ``i_link`` pointer in the inode is set to point to wherever the +symlink is stored and it can be accessed directly whenever needed. + +When the symlink is stored in the page cache or elsewhere, the +situation is not so straightforward. A reference on a dentry or even +on an inode does not imply any reference on cached pages of that +inode, and even an ``rcu_read_lock()`` is not sufficient to ensure that +a page will not disappear. So for these symlinks the pathname lookup +code needs to ask the filesystem to provide a stable reference and, +significantly, needs to release that reference when it is finished +with it. + +Taking a reference to a cache page is often possible even in RCU-walk +mode. It does require making changes to memory, which is best avoided, +but that isn't necessarily a big cost and it is better than dropping +out of RCU-walk mode completely. Even filesystems that allocate +space to copy the symlink into can use ``GFP_ATOMIC`` to often successfully +allocate memory without the need to drop out of RCU-walk. If a +filesystem cannot successfully get a reference in RCU-walk mode, it +must return ``-ECHILD`` and ``unlazy_walk()`` will be called to return to +REF-walk mode in which the filesystem is allowed to sleep. + +The place for all this to happen is the ``i_op->follow_link()`` inode +method. In the present mainline code this is never actually called in +RCU-walk mode as the rewrite is not quite complete. It is likely that +in a future release this method will be passed an ``inode`` pointer when +called in RCU-walk mode so it both (1) knows to be careful, and (2) has the +validated pointer. Much like the ``i_op->permission()`` method we +looked at previously, ``->follow_link()`` would need to be careful that +all the data structures it references are safe to be accessed while +holding no counted reference, only the RCU lock. Though getting a +reference with ``->follow_link()`` is not yet done in RCU-walk mode, the +code is ready to release the reference when that does happen. + +This need to drop the reference to a symlink adds significant +complexity. It requires a reference to the inode so that the +``i_op->put_link()`` inode operation can be called. In REF-walk, that +reference is kept implicitly through a reference to the dentry, so +keeping the ``struct path`` of the symlink is easiest. For RCU-walk, +the pointer to the inode is kept separately. To allow switching from +RCU-walk back to REF-walk in the middle of processing nested symlinks +we also need the seq number for the dentry so we can confirm that +switching back was safe. + +Finally, when providing a reference to a symlink, the filesystem also +provides an opaque "cookie" that must be passed to ``->put_link()`` so that it +knows what to free. This might be the allocated memory area, or a +pointer to the ``struct page`` in the page cache, or something else +completely. Only the filesystem knows what it is. + +In order for the reference to each symlink to be dropped when the walk completes, +whether in RCU-walk or REF-walk, the symlink stack needs to contain, +along with the path remnants: + +- the ``struct path`` to provide a reference to the inode in REF-walk +- the ``struct inode *`` to provide a reference to the inode in RCU-walk +- the ``seq`` to allow the path to be safely switched from RCU-walk to REF-walk +- the ``cookie`` that tells ``->put_path()`` what to put. + +This means that each entry in the symlink stack needs to hold five +pointers and an integer instead of just one pointer (the path +remnant). On a 64-bit system, this is about 40 bytes per entry; +with 40 entries it adds up to 1600 bytes total, which is less than +half a page. So it might seem like a lot, but is by no means +excessive. + +Note that, in a given stack frame, the path remnant (``name``) is not +part of the symlink that the other fields refer to. It is the remnant +to be followed once that symlink has been fully parsed. + +Following the symlink +--------------------- + +The main loop in ``link_path_walk()`` iterates seamlessly over all +components in the path and all of the non-final symlinks. As symlinks +are processed, the ``name`` pointer is adjusted to point to a new +symlink, or is restored from the stack, so that much of the loop +doesn't need to notice. Getting this ``name`` variable on and off the +stack is very straightforward; pushing and popping the references is +a little more complex. + +When a symlink is found, ``walk_component()`` returns the value ``1`` +(``0`` is returned for any other sort of success, and a negative number +is, as usual, an error indicator). This causes ``get_link()`` to be +called; it then gets the link from the filesystem. Providing that +operation is successful, the old path ``name`` is placed on the stack, +and the new value is used as the ``name`` for a while. When the end of +the path is found (i.e. ``*name`` is ``'\0'``) the old ``name`` is restored +off the stack and path walking continues. + +Pushing and popping the reference pointers (inode, cookie, etc.) is more +complex in part because of the desire to handle tail recursion. When +the last component of a symlink itself points to a symlink, we +want to pop the symlink-just-completed off the stack before pushing +the symlink-just-found to avoid leaving empty path remnants that would +just get in the way. + +It is most convenient to push the new symlink references onto the +stack in ``walk_component()`` immediately when the symlink is found; +``walk_component()`` is also the last piece of code that needs to look at the +old symlink as it walks that last component. So it is quite +convenient for ``walk_component()`` to release the old symlink and pop +the references just before pushing the reference information for the +new symlink. It is guided in this by two flags; ``WALK_GET``, which +gives it permission to follow a symlink if it finds one, and +``WALK_PUT``, which tells it to release the current symlink after it has been +followed. ``WALK_PUT`` is tested first, leading to a call to +``put_link()``. ``WALK_GET`` is tested subsequently (by +``should_follow_link()``) leading to a call to ``pick_link()`` which sets +up the stack frame. + +Symlinks with no final component +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +A pair of special-case symlinks deserve a little further explanation. +Both result in a new ``struct path`` (with mount and dentry) being set +up in the ``nameidata``, and result in ``get_link()`` returning ``NULL``. + +The more obvious case is a symlink to "``/``". All symlinks starting +with "``/``" are detected in ``get_link()`` which resets the ``nameidata`` +to point to the effective filesystem root. If the symlink only +contains "``/``" then there is nothing more to do, no components at all, +so ``NULL`` is returned to indicate that the symlink can be released and +the stack frame discarded. + +The other case involves things in ``/proc`` that look like symlinks but +aren't really (and are therefore commonly referred to as "magic-links"):: + + $ ls -l /proc/self/fd/1 + lrwx------ 1 neilb neilb 64 Jun 13 10:19 /proc/self/fd/1 -> /dev/pts/4 + +Every open file descriptor in any process is represented in ``/proc`` by +something that looks like a symlink. It is really a reference to the +target file, not just the name of it. When you ``readlink`` these +objects you get a name that might refer to the same file - unless it +has been unlinked or mounted over. When ``walk_component()`` follows +one of these, the ``->follow_link()`` method in "procfs" doesn't return +a string name, but instead calls ``nd_jump_link()`` which updates the +``nameidata`` in place to point to that target. ``->follow_link()`` then +returns ``NULL``. Again there is no final component and ``get_link()`` +reports this by leaving the ``last_type`` field of ``nameidata`` as +``LAST_BIND``. + +Following the symlink in the final component +-------------------------------------------- + +All this leads to ``link_path_walk()`` walking down every component, and +following all symbolic links it finds, until it reaches the final +component. This is just returned in the ``last`` field of ``nameidata``. +For some callers, this is all they need; they want to create that +``last`` name if it doesn't exist or give an error if it does. Other +callers will want to follow a symlink if one is found, and possibly +apply special handling to the last component of that symlink, rather +than just the last component of the original file name. These callers +potentially need to call ``link_path_walk()`` again and again on +successive symlinks until one is found that doesn't point to another +symlink. + +This case is handled by the relevant caller of ``link_path_walk()``, such as +``path_lookupat()`` using a loop that calls ``link_path_walk()``, and then +handles the final component. If the final component is a symlink +that needs to be followed, then ``trailing_symlink()`` is called to set +things up properly and the loop repeats, calling ``link_path_walk()`` +again. This could loop as many as 40 times if the last component of +each symlink is another symlink. + +The various functions that examine the final component and possibly +report that it is a symlink are ``lookup_last()``, ``mountpoint_last()`` +and ``do_last()``, each of which use the same convention as +``walk_component()`` of returning ``1`` if a symlink was found that needs +to be followed. + +Of these, ``do_last()`` is the most interesting as it is used for +opening a file. Part of ``do_last()`` runs with ``i_rwsem`` held and this +part is in a separate function: ``lookup_open()``. + +Explaining ``do_last()`` completely is beyond the scope of this article, +but a few highlights should help those interested in exploring the +code. + +1. Rather than just finding the target file, ``do_last()`` needs to open + it. If the file was found in the dcache, then ``vfs_open()`` is used for + this. If not, then ``lookup_open()`` will either call ``atomic_open()`` (if + the filesystem provides it) to combine the final lookup with the open, or + will perform the separate ``lookup_real()`` and ``vfs_create()`` steps + directly. In the later case the actual "open" of this newly found or + created file will be performed by ``vfs_open()``, just as if the name + were found in the dcache. + +2. ``vfs_open()`` can fail with ``-EOPENSTALE`` if the cached information + wasn't quite current enough. Rather than restarting the lookup from + the top with ``LOOKUP_REVAL`` set, ``lookup_open()`` is called instead, + giving the filesystem a chance to resolve small inconsistencies. + If that doesn't work, only then is the lookup restarted from the top. + +3. An open with O_CREAT **does** follow a symlink in the final component, + unlike other creation system calls (like ``mkdir``). So the sequence:: + + ln -s bar /tmp/foo + echo hello > /tmp/foo + + will create a file called ``/tmp/bar``. This is not permitted if + ``O_EXCL`` is set but otherwise is handled for an O_CREAT open much + like for a non-creating open: ``should_follow_link()`` returns ``1``, and + so does ``do_last()`` so that ``trailing_symlink()`` gets called and the + open process continues on the symlink that was found. + +Updating the access time +------------------------ + +We previously said of RCU-walk that it would "take no locks, increment +no counts, leave no footprints." We have since seen that some +"footprints" can be needed when handling symlinks as a counted +reference (or even a memory allocation) may be needed. But these +footprints are best kept to a minimum. + +One other place where walking down a symlink can involve leaving +footprints in a way that doesn't affect directories is in updating access times. +In Unix (and Linux) every filesystem object has a "last accessed +time", or "``atime``". Passing through a directory to access a file +within is not considered to be an access for the purposes of +``atime``; only listing the contents of a directory can update its ``atime``. +Symlinks are different it seems. Both reading a symlink (with ``readlink()``) +and looking up a symlink on the way to some other destination can +update the atime on that symlink. + +.. _clearest statement: https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap04.html#tag_04_08 + +It is not clear why this is the case; POSIX has little to say on the +subject. The `clearest statement`_ is that, if a particular implementation +updates a timestamp in a place not specified by POSIX, this must be +documented "except that any changes caused by pathname resolution need +not be documented". This seems to imply that POSIX doesn't really +care about access-time updates during pathname lookup. + +.. _Linux 1.3.87: https://git.kernel.org/cgit/linux/kernel/git/history/history.git/diff/fs/ext2/symlink.c?id=f806c6db77b8eaa6e00dcfb6b567706feae8dbb8 + +An examination of history shows that prior to `Linux 1.3.87`_, the ext2 +filesystem, at least, didn't update atime when following a link. +Unfortunately we have no record of why that behavior was changed. + +In any case, access time must now be updated and that operation can be +quite complex. Trying to stay in RCU-walk while doing it is best +avoided. Fortunately it is often permitted to skip the ``atime`` +update. Because ``atime`` updates cause performance problems in various +areas, Linux supports the ``relatime`` mount option, which generally +limits the updates of ``atime`` to once per day on files that aren't +being changed (and symlinks never change once created). Even without +``relatime``, many filesystems record ``atime`` with a one-second +granularity, so only one update per second is required. + +It is easy to test if an ``atime`` update is needed while in RCU-walk +mode and, if it isn't, the update can be skipped and RCU-walk mode +continues. Only when an ``atime`` update is actually required does the +path walk drop down to REF-walk. All of this is handled in the +``get_link()`` function. + +A few flags +----------- + +A suitable way to wrap up this tour of pathname walking is to list +the various flags that can be stored in the ``nameidata`` to guide the +lookup process. Many of these are only meaningful on the final +component, others reflect the current state of the pathname lookup, and some +apply restrictions to all path components encountered in the path lookup. + +And then there is ``LOOKUP_EMPTY``, which doesn't fit conceptually with +the others. If this is not set, an empty pathname causes an error +very early on. If it is set, empty pathnames are not considered to be +an error. + +Global state flags +~~~~~~~~~~~~~~~~~~ + +We have already met two global state flags: ``LOOKUP_RCU`` and +``LOOKUP_REVAL``. These select between one of three overall approaches +to lookup: RCU-walk, REF-walk, and REF-walk with forced revalidation. + +``LOOKUP_PARENT`` indicates that the final component hasn't been reached +yet. This is primarily used to tell the audit subsystem the full +context of a particular access being audited. + +``LOOKUP_ROOT`` indicates that the ``root`` field in the ``nameidata`` was +provided by the caller, so it shouldn't be released when it is no +longer needed. + +``LOOKUP_JUMPED`` means that the current dentry was chosen not because +it had the right name but for some other reason. This happens when +following "``..``", following a symlink to ``/``, crossing a mount point +or accessing a "``/proc/$PID/fd/$FD``" symlink (also known as a "magic +link"). In this case the filesystem has not been asked to revalidate the +name (with ``d_revalidate()``). In such cases the inode may still need +to be revalidated, so ``d_op->d_weak_revalidate()`` is called if +``LOOKUP_JUMPED`` is set when the look completes - which may be at the +final component or, when creating, unlinking, or renaming, at the penultimate component. + +Resolution-restriction flags +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +In order to allow userspace to protect itself against certain race conditions +and attack scenarios involving changing path components, a series of flags are +available which apply restrictions to all path components encountered during +path lookup. These flags are exposed through ``openat2()``'s ``resolve`` field. + +``LOOKUP_NO_SYMLINKS`` blocks all symlink traversals (including magic-links). +This is distinctly different from ``LOOKUP_FOLLOW``, because the latter only +relates to restricting the following of trailing symlinks. + +``LOOKUP_NO_MAGICLINKS`` blocks all magic-link traversals. Filesystems must +ensure that they return errors from ``nd_jump_link()``, because that is how +``LOOKUP_NO_MAGICLINKS`` and other magic-link restrictions are implemented. + +``LOOKUP_NO_XDEV`` blocks all ``vfsmount`` traversals (this includes both +bind-mounts and ordinary mounts). Note that the ``vfsmount`` which contains the +lookup is determined by the first mountpoint the path lookup reaches -- +absolute paths start with the ``vfsmount`` of ``/``, and relative paths start +with the ``dfd``'s ``vfsmount``. Magic-links are only permitted if the +``vfsmount`` of the path is unchanged. + +``LOOKUP_BENEATH`` blocks any path components which resolve outside the +starting point of the resolution. This is done by blocking ``nd_jump_root()`` +as well as blocking ".." if it would jump outside the starting point. +``rename_lock`` and ``mount_lock`` are used to detect attacks against the +resolution of "..". Magic-links are also blocked. + +``LOOKUP_IN_ROOT`` resolves all path components as though the starting point +were the filesystem root. ``nd_jump_root()`` brings the resolution back to +the starting point, and ".." at the starting point will act as a no-op. As with +``LOOKUP_BENEATH``, ``rename_lock`` and ``mount_lock`` are used to detect +attacks against ".." resolution. Magic-links are also blocked. + +Final-component flags +~~~~~~~~~~~~~~~~~~~~~ + +Some of these flags are only set when the final component is being +considered. Others are only checked for when considering that final +component. + +``LOOKUP_AUTOMOUNT`` ensures that, if the final component is an automount +point, then the mount is triggered. Some operations would trigger it +anyway, but operations like ``stat()`` deliberately don't. ``statfs()`` +needs to trigger the mount but otherwise behaves a lot like ``stat()``, so +it sets ``LOOKUP_AUTOMOUNT``, as does "``quotactl()``" and the handling of +"``mount --bind``". + +``LOOKUP_FOLLOW`` has a similar function to ``LOOKUP_AUTOMOUNT`` but for +symlinks. Some system calls set or clear it implicitly, while +others have API flags such as ``AT_SYMLINK_FOLLOW`` and +``UMOUNT_NOFOLLOW`` to control it. Its effect is similar to +``WALK_GET`` that we already met, but it is used in a different way. + +``LOOKUP_DIRECTORY`` insists that the final component is a directory. +Various callers set this and it is also set when the final component +is found to be followed by a slash. + +Finally ``LOOKUP_OPEN``, ``LOOKUP_CREATE``, ``LOOKUP_EXCL``, and +``LOOKUP_RENAME_TARGET`` are not used directly by the VFS but are made +available to the filesystem and particularly the ``->d_revalidate()`` +method. A filesystem can choose not to bother revalidating too hard +if it knows that it will be asked to open or create the file soon. +These flags were previously useful for ``->lookup()`` too but with the +introduction of ``->atomic_open()`` they are less relevant there. + +End of the road +--------------- + +Despite its complexity, all this pathname lookup code appears to be +in good shape - various parts are certainly easier to understand now +than even a couple of releases ago. But that doesn't mean it is +"finished". As already mentioned, RCU-walk currently only follows +symlinks that are stored in the inode so, while it handles many ext4 +symlinks, it doesn't help with NFS, XFS, or Btrfs. That support +is not likely to be long delayed. diff --git a/Documentation/filesystems/path-lookup.txt b/Documentation/filesystems/path-lookup.txt new file mode 100644 index 000000000..1aa7ce099 --- /dev/null +++ b/Documentation/filesystems/path-lookup.txt @@ -0,0 +1,382 @@ +Path walking and name lookup locking +==================================== + +Path resolution is the finding a dentry corresponding to a path name string, by +performing a path walk. Typically, for every open(), stat() etc., the path name +will be resolved. Paths are resolved by walking the namespace tree, starting +with the first component of the pathname (eg. root or cwd) with a known dentry, +then finding the child of that dentry, which is named the next component in the +path string. Then repeating the lookup from the child dentry and finding its +child with the next element, and so on. + +Since it is a frequent operation for workloads like multiuser environments and +web servers, it is important to optimize this code. + +Path walking synchronisation history: +Prior to 2.5.10, dcache_lock was acquired in d_lookup (dcache hash lookup) and +thus in every component during path look-up. Since 2.5.10 onwards, fast-walk +algorithm changed this by holding the dcache_lock at the beginning and walking +as many cached path component dentries as possible. This significantly +decreases the number of acquisition of dcache_lock. However it also increases +the lock hold time significantly and affects performance in large SMP machines. +Since 2.5.62 kernel, dcache has been using a new locking model that uses RCU to +make dcache look-up lock-free. + +All the above algorithms required taking a lock and reference count on the +dentry that was looked up, so that may be used as the basis for walking the +next path element. This is inefficient and unscalable. It is inefficient +because of the locks and atomic operations required for every dentry element +slows things down. It is not scalable because many parallel applications that +are path-walk intensive tend to do path lookups starting from a common dentry +(usually, the root "/" or current working directory). So contention on these +common path elements causes lock and cacheline queueing. + +Since 2.6.38, RCU is used to make a significant part of the entire path walk +(including dcache look-up) completely "store-free" (so, no locks, atomics, or +even stores into cachelines of common dentries). This is known as "rcu-walk" +path walking. + +Path walking overview +===================== + +A name string specifies a start (root directory, cwd, fd-relative) and a +sequence of elements (directory entry names), which together refer to a path in +the namespace. A path is represented as a (dentry, vfsmount) tuple. The name +elements are sub-strings, separated by '/'. + +Name lookups will want to find a particular path that a name string refers to +(usually the final element, or parent of final element). This is done by taking +the path given by the name's starting point (which we know in advance -- eg. +current->fs->cwd or current->fs->root) as the first parent of the lookup. Then +iteratively for each subsequent name element, look up the child of the current +parent with the given name and if it is not the desired entry, make it the +parent for the next lookup. + +A parent, of course, must be a directory, and we must have appropriate +permissions on the parent inode to be able to walk into it. + +Turning the child into a parent for the next lookup requires more checks and +procedures. Symlinks essentially substitute the symlink name for the target +name in the name string, and require some recursive path walking. Mount points +must be followed into (thus changing the vfsmount that subsequent path elements +refer to), switching from the mount point path to the root of the particular +mounted vfsmount. These behaviours are variously modified depending on the +exact path walking flags. + +Path walking then must, broadly, do several particular things: +- find the start point of the walk; +- perform permissions and validity checks on inodes; +- perform dcache hash name lookups on (parent, name element) tuples; +- traverse mount points; +- traverse symlinks; +- lookup and create missing parts of the path on demand. + +Safe store-free look-up of dcache hash table +============================================ + +Dcache name lookup +------------------ +In order to lookup a dcache (parent, name) tuple, we take a hash on the tuple +and use that to select a bucket in the dcache-hash table. The list of entries +in that bucket is then walked, and we do a full comparison of each entry +against our (parent, name) tuple. + +The hash lists are RCU protected, so list walking is not serialised with +concurrent updates (insertion, deletion from the hash). This is a standard RCU +list application with the exception of renames, which will be covered below. + +Parent and name members of a dentry, as well as its membership in the dcache +hash, and its inode are protected by the per-dentry d_lock spinlock. A +reference is taken on the dentry (while the fields are verified under d_lock), +and this stabilises its d_inode pointer and actual inode. This gives a stable +point to perform the next step of our path walk against. + +These members are also protected by d_seq seqlock, although this offers +read-only protection and no durability of results, so care must be taken when +using d_seq for synchronisation (see seqcount based lookups, below). + +Renames +------- +Back to the rename case. In usual RCU protected lists, the only operations that +will happen to an object is insertion, and then eventually removal from the +list. The object will not be reused until an RCU grace period is complete. +This ensures the RCU list traversal primitives can run over the object without +problems (see RCU documentation for how this works). + +However when a dentry is renamed, its hash value can change, requiring it to be +moved to a new hash list. Allocating and inserting a new alias would be +expensive and also problematic for directory dentries. Latency would be far to +high to wait for a grace period after removing the dentry and before inserting +it in the new hash bucket. So what is done is to insert the dentry into the +new list immediately. + +However, when the dentry's list pointers are updated to point to objects in the +new list before waiting for a grace period, this can result in a concurrent RCU +lookup of the old list veering off into the new (incorrect) list and missing +the remaining dentries on the list. + +There is no fundamental problem with walking down the wrong list, because the +dentry comparisons will never match. However it is fatal to miss a matching +dentry. So a seqlock is used to detect when a rename has occurred, and so the +lookup can be retried. + + 1 2 3 + +---+ +---+ +---+ +hlist-->| N-+->| N-+->| N-+-> +head <--+-P |<-+-P |<-+-P | + +---+ +---+ +---+ + +Rename of dentry 2 may require it deleted from the above list, and inserted +into a new list. Deleting 2 gives the following list. + + 1 3 + +---+ +---+ (don't worry, the longer pointers do not +hlist-->| N-+-------->| N-+-> impose a measurable performance overhead +head <--+-P |<--------+-P | on modern CPUs) + +---+ +---+ + ^ 2 ^ + | +---+ | + | | N-+----+ + +----+-P | + +---+ + +This is a standard RCU-list deletion, which leaves the deleted object's +pointers intact, so a concurrent list walker that is currently looking at +object 2 will correctly continue to object 3 when it is time to traverse the +next object. + +However, when inserting object 2 onto a new list, we end up with this: + + 1 3 + +---+ +---+ +hlist-->| N-+-------->| N-+-> +head <--+-P |<--------+-P | + +---+ +---+ + 2 + +---+ + | N-+----> + <----+-P | + +---+ + +Because we didn't wait for a grace period, there may be a concurrent lookup +still at 2. Now when it follows 2's 'next' pointer, it will walk off into +another list without ever having checked object 3. + +A related, but distinctly different, issue is that of rename atomicity versus +lookup operations. If a file is renamed from 'A' to 'B', a lookup must only +find either 'A' or 'B'. So if a lookup of 'A' returns NULL, a subsequent lookup +of 'B' must succeed (note the reverse is not true). + +Between deleting the dentry from the old hash list, and inserting it on the new +hash list, a lookup may find neither 'A' nor 'B' matching the dentry. The same +rename seqlock is also used to cover this race in much the same way, by +retrying a negative lookup result if a rename was in progress. + +Seqcount based lookups +---------------------- +In refcount based dcache lookups, d_lock is used to serialise access to +the dentry, stabilising it while comparing its name and parent and then +taking a reference count (the reference count then gives a stable place to +start the next part of the path walk from). + +As explained above, we would like to do path walking without taking locks or +reference counts on intermediate dentries along the path. To do this, a per +dentry seqlock (d_seq) is used to take a "coherent snapshot" of what the dentry +looks like (its name, parent, and inode). That snapshot is then used to start +the next part of the path walk. When loading the coherent snapshot under d_seq, +care must be taken to load the members up-front, and use those pointers rather +than reloading from the dentry later on (otherwise we'd have interesting things +like d_inode going NULL underneath us, if the name was unlinked). + +Also important is to avoid performing any destructive operations (pretty much: +no non-atomic stores to shared data), and to recheck the seqcount when we are +"done" with the operation. Retry or abort if the seqcount does not match. +Avoiding destructive or changing operations means we can easily unwind from +failure. + +What this means is that a caller, provided they are holding RCU lock to +protect the dentry object from disappearing, can perform a seqcount based +lookup which does not increment the refcount on the dentry or write to +it in any way. This returned dentry can be used for subsequent operations, +provided that d_seq is rechecked after that operation is complete. + +Inodes are also rcu freed, so the seqcount lookup dentry's inode may also be +queried for permissions. + +With this two parts of the puzzle, we can do path lookups without taking +locks or refcounts on dentry elements. + +RCU-walk path walking design +============================ + +Path walking code now has two distinct modes, ref-walk and rcu-walk. ref-walk +is the traditional[*] way of performing dcache lookups using d_lock to +serialise concurrent modifications to the dentry and take a reference count on +it. ref-walk is simple and obvious, and may sleep, take locks, etc while path +walking is operating on each dentry. rcu-walk uses seqcount based dentry +lookups, and can perform lookup of intermediate elements without any stores to +shared data in the dentry or inode. rcu-walk can not be applied to all cases, +eg. if the filesystem must sleep or perform non trivial operations, rcu-walk +must be switched to ref-walk mode. + +[*] RCU is still used for the dentry hash lookup in ref-walk, but not the full + path walk. + +Where ref-walk uses a stable, refcounted ``parent'' to walk the remaining +path string, rcu-walk uses a d_seq protected snapshot. When looking up a +child of this parent snapshot, we open d_seq critical section on the child +before closing d_seq critical section on the parent. This gives an interlocking +ladder of snapshots to walk down. + + + proc 101 + /----------------\ + / comm: "vi" \ + / fs.root: dentry0 \ + \ fs.cwd: dentry2 / + \ / + \----------------/ + +So when vi wants to open("/home/npiggin/test.c", O_RDWR), then it will +start from current->fs->root, which is a pinned dentry. Alternatively, +"./test.c" would start from cwd; both names refer to the same path in +the context of proc101. + + dentry 0 + +---------------------+ rcu-walk begins here, we note d_seq, check the + | name: "/" | inode's permission, and then look up the next + | inode: 10 | path element which is "home"... + | children:"home", ...| + +---------------------+ + | + dentry 1 V + +---------------------+ ... which brings us here. We find dentry1 via + | name: "home" | hash lookup, then note d_seq and compare name + | inode: 678 | string and parent pointer. When we have a match, + | children:"npiggin" | we now recheck the d_seq of dentry0. Then we + +---------------------+ check inode and look up the next element. + | + dentry2 V + +---------------------+ Note: if dentry0 is now modified, lookup is + | name: "npiggin" | not necessarily invalid, so we need only keep a + | inode: 543 | parent for d_seq verification, and grandparents + | children:"a.c", ... | can be forgotten. + +---------------------+ + | + dentry3 V + +---------------------+ At this point we have our destination dentry. + | name: "a.c" | We now take its d_lock, verify d_seq of this + | inode: 14221 | dentry. If that checks out, we can increment + | children:NULL | its refcount because we're holding d_lock. + +---------------------+ + +Taking a refcount on a dentry from rcu-walk mode, by taking its d_lock, +re-checking its d_seq, and then incrementing its refcount is called +"dropping rcu" or dropping from rcu-walk into ref-walk mode. + +It is, in some sense, a bit of a house of cards. If the seqcount check of the +parent snapshot fails, the house comes down, because we had closed the d_seq +section on the grandparent, so we have nothing left to stand on. In that case, +the path walk must be fully restarted (which we do in ref-walk mode, to avoid +live locks). It is costly to have a full restart, but fortunately they are +quite rare. + +When we reach a point where sleeping is required, or a filesystem callout +requires ref-walk, then instead of restarting the walk, we attempt to drop rcu +at the last known good dentry we have. Avoiding a full restart in ref-walk in +these cases is fundamental for performance and scalability because blocking +operations such as creates and unlinks are not uncommon. + +The detailed design for rcu-walk is like this: +* LOOKUP_RCU is set in nd->flags, which distinguishes rcu-walk from ref-walk. +* Take the RCU lock for the entire path walk, starting with the acquiring + of the starting path (eg. root/cwd/fd-path). So now dentry refcounts are + not required for dentry persistence. +* synchronize_rcu is called when unregistering a filesystem, so we can + access d_ops and i_ops during rcu-walk. +* Similarly take the vfsmount lock for the entire path walk. So now mnt + refcounts are not required for persistence. Also we are free to perform mount + lookups, and to assume dentry mount points and mount roots are stable up and + down the path. +* Have a per-dentry seqlock to protect the dentry name, parent, and inode, + so we can load this tuple atomically, and also check whether any of its + members have changed. +* Dentry lookups (based on parent, candidate string tuple) recheck the parent + sequence after the child is found in case anything changed in the parent + during the path walk. +* inode is also RCU protected so we can load d_inode and use the inode for + limited things. +* i_mode, i_uid, i_gid can be tested for exec permissions during path walk. +* i_op can be loaded. +* When the destination dentry is reached, drop rcu there (ie. take d_lock, + verify d_seq, increment refcount). +* If seqlock verification fails anywhere along the path, do a full restart + of the path lookup in ref-walk mode. -ECHILD tends to be used (for want of + a better errno) to signal an rcu-walk failure. + +The cases where rcu-walk cannot continue are: +* NULL dentry (ie. any uncached path element) +* Following links + +It may be possible eventually to make following links rcu-walk aware. + +Uncached path elements will always require dropping to ref-walk mode, at the +very least because i_mutex needs to be grabbed, and objects allocated. + +Final note: +"store-free" path walking is not strictly store free. We take vfsmount lock +and refcounts (both of which can be made per-cpu), and we also store to the +stack (which is essentially CPU-local), and we also have to take locks and +refcount on final dentry. + +The point is that shared data, where practically possible, is not locked +or stored into. The result is massive improvements in performance and +scalability of path resolution. + + +Interesting statistics +====================== + +The following table gives rcu lookup statistics for a few simple workloads +(2s12c24t Westmere, debian non-graphical system). Ungraceful are attempts to +drop rcu that fail due to d_seq failure and requiring the entire path lookup +again. Other cases are successful rcu-drops that are required before the final +element, nodentry for missing dentry, revalidate for filesystem revalidate +routine requiring rcu drop, permission for permission check requiring drop, +and link for symlink traversal requiring drop. + + rcu-lookups restart nodentry link revalidate permission +bootup 47121 0 4624 1010 10283 7852 +dbench 25386793 0 6778659(26.7%) 55 549 1156 +kbuild 2696672 10 64442(2.3%) 108764(4.0%) 1 1590 +git diff 39605 0 28 2 0 106 +vfstest 24185492 4945 708725(2.9%) 1076136(4.4%) 0 2651 + +What this shows is that failed rcu-walk lookups, ie. ones that are restarted +entirely with ref-walk, are quite rare. Even the "vfstest" case which +specifically has concurrent renames/mkdir/rmdir/ creat/unlink/etc to exercise +such races is not showing a huge amount of restarts. + +Dropping from rcu-walk to ref-walk mean that we have encountered a dentry where +the reference count needs to be taken for some reason. This is either because +we have reached the target of the path walk, or because we have encountered a +condition that can't be resolved in rcu-walk mode. Ideally, we drop rcu-walk +only when we have reached the target dentry, so the other statistics show where +this does not happen. + +Note that a graceful drop from rcu-walk mode due to something such as the +dentry not existing (which can be common) is not necessarily a failure of +rcu-walk scheme, because some elements of the path may have been walked in +rcu-walk mode. The further we get from common path elements (such as cwd or +root), the less contended the dentry is likely to be. The closer we are to +common path elements, the more likely they will exist in dentry cache. + + +Papers and other documentation on dcache locking +================================================ + +1. Scaling dcache with RCU (https://linuxjournal.com/article.php?sid=7124). + +2. http://lse.sourceforge.net/locking/dcache/dcache.html + +3. path-lookup.md in this directory. diff --git a/Documentation/filesystems/porting.rst b/Documentation/filesystems/porting.rst new file mode 100644 index 000000000..867036aa9 --- /dev/null +++ b/Documentation/filesystems/porting.rst @@ -0,0 +1,867 @@ +==================== +Changes since 2.5.0: +==================== + +--- + +**recommended** + +New helpers: sb_bread(), sb_getblk(), sb_find_get_block(), set_bh(), +sb_set_blocksize() and sb_min_blocksize(). + +Use them. + +(sb_find_get_block() replaces 2.4's get_hash_table()) + +--- + +**recommended** + +New methods: ->alloc_inode() and ->destroy_inode(). + +Remove inode->u.foo_inode_i + +Declare:: + + struct foo_inode_info { + /* fs-private stuff */ + struct inode vfs_inode; + }; + static inline struct foo_inode_info *FOO_I(struct inode *inode) + { + return list_entry(inode, struct foo_inode_info, vfs_inode); + } + +Use FOO_I(inode) instead of &inode->u.foo_inode_i; + +Add foo_alloc_inode() and foo_destroy_inode() - the former should allocate +foo_inode_info and return the address of ->vfs_inode, the latter should free +FOO_I(inode) (see in-tree filesystems for examples). + +Make them ->alloc_inode and ->destroy_inode in your super_operations. + +Keep in mind that now you need explicit initialization of private data +typically between calling iget_locked() and unlocking the inode. + +At some point that will become mandatory. + +--- + +**mandatory** + +Change of file_system_type method (->read_super to ->get_sb) + +->read_super() is no more. Ditto for DECLARE_FSTYPE and DECLARE_FSTYPE_DEV. + +Turn your foo_read_super() into a function that would return 0 in case of +success and negative number in case of error (-EINVAL unless you have more +informative error value to report). Call it foo_fill_super(). Now declare:: + + int foo_get_sb(struct file_system_type *fs_type, + int flags, const char *dev_name, void *data, struct vfsmount *mnt) + { + return get_sb_bdev(fs_type, flags, dev_name, data, foo_fill_super, + mnt); + } + +(or similar with s/bdev/nodev/ or s/bdev/single/, depending on the kind of +filesystem). + +Replace DECLARE_FSTYPE... with explicit initializer and have ->get_sb set as +foo_get_sb. + +--- + +**mandatory** + +Locking change: ->s_vfs_rename_sem is taken only by cross-directory renames. +Most likely there is no need to change anything, but if you relied on +global exclusion between renames for some internal purpose - you need to +change your internal locking. Otherwise exclusion warranties remain the +same (i.e. parents and victim are locked, etc.). + +--- + +**informational** + +Now we have the exclusion between ->lookup() and directory removal (by +->rmdir() and ->rename()). If you used to need that exclusion and do +it by internal locking (most of filesystems couldn't care less) - you +can relax your locking. + +--- + +**mandatory** + +->lookup(), ->truncate(), ->create(), ->unlink(), ->mknod(), ->mkdir(), +->rmdir(), ->link(), ->lseek(), ->symlink(), ->rename() +and ->readdir() are called without BKL now. Grab it on entry, drop upon return +- that will guarantee the same locking you used to have. If your method or its +parts do not need BKL - better yet, now you can shift lock_kernel() and +unlock_kernel() so that they would protect exactly what needs to be +protected. + +--- + +**mandatory** + +BKL is also moved from around sb operations. BKL should have been shifted into +individual fs sb_op functions. If you don't need it, remove it. + +--- + +**informational** + +check for ->link() target not being a directory is done by callers. Feel +free to drop it... + +--- + +**informational** + +->link() callers hold ->i_mutex on the object we are linking to. Some of your +problems might be over... + +--- + +**mandatory** + +new file_system_type method - kill_sb(superblock). If you are converting +an existing filesystem, set it according to ->fs_flags:: + + FS_REQUIRES_DEV - kill_block_super + FS_LITTER - kill_litter_super + neither - kill_anon_super + +FS_LITTER is gone - just remove it from fs_flags. + +--- + +**mandatory** + +FS_SINGLE is gone (actually, that had happened back when ->get_sb() +went in - and hadn't been documented ;-/). Just remove it from fs_flags +(and see ->get_sb() entry for other actions). + +--- + +**mandatory** + +->setattr() is called without BKL now. Caller _always_ holds ->i_mutex, so +watch for ->i_mutex-grabbing code that might be used by your ->setattr(). +Callers of notify_change() need ->i_mutex now. + +--- + +**recommended** + +New super_block field ``struct export_operations *s_export_op`` for +explicit support for exporting, e.g. via NFS. The structure is fully +documented at its declaration in include/linux/fs.h, and in +Documentation/filesystems/nfs/exporting.rst. + +Briefly it allows for the definition of decode_fh and encode_fh operations +to encode and decode filehandles, and allows the filesystem to use +a standard helper function for decode_fh, and provide file-system specific +support for this helper, particularly get_parent. + +It is planned that this will be required for exporting once the code +settles down a bit. + +**mandatory** + +s_export_op is now required for exporting a filesystem. +isofs, ext2, ext3, resierfs, fat +can be used as examples of very different filesystems. + +--- + +**mandatory** + +iget4() and the read_inode2 callback have been superseded by iget5_locked() +which has the following prototype:: + + struct inode *iget5_locked(struct super_block *sb, unsigned long ino, + int (*test)(struct inode *, void *), + int (*set)(struct inode *, void *), + void *data); + +'test' is an additional function that can be used when the inode +number is not sufficient to identify the actual file object. 'set' +should be a non-blocking function that initializes those parts of a +newly created inode to allow the test function to succeed. 'data' is +passed as an opaque value to both test and set functions. + +When the inode has been created by iget5_locked(), it will be returned with the +I_NEW flag set and will still be locked. The filesystem then needs to finalize +the initialization. Once the inode is initialized it must be unlocked by +calling unlock_new_inode(). + +The filesystem is responsible for setting (and possibly testing) i_ino +when appropriate. There is also a simpler iget_locked function that +just takes the superblock and inode number as arguments and does the +test and set for you. + +e.g.:: + + inode = iget_locked(sb, ino); + if (inode->i_state & I_NEW) { + err = read_inode_from_disk(inode); + if (err < 0) { + iget_failed(inode); + return err; + } + unlock_new_inode(inode); + } + +Note that if the process of setting up a new inode fails, then iget_failed() +should be called on the inode to render it dead, and an appropriate error +should be passed back to the caller. + +--- + +**recommended** + +->getattr() finally getting used. See instances in nfs, minix, etc. + +--- + +**mandatory** + +->revalidate() is gone. If your filesystem had it - provide ->getattr() +and let it call whatever you had as ->revlidate() + (for symlinks that +had ->revalidate()) add calls in ->follow_link()/->readlink(). + +--- + +**mandatory** + +->d_parent changes are not protected by BKL anymore. Read access is safe +if at least one of the following is true: + + * filesystem has no cross-directory rename() + * we know that parent had been locked (e.g. we are looking at + ->d_parent of ->lookup() argument). + * we are called from ->rename(). + * the child's ->d_lock is held + +Audit your code and add locking if needed. Notice that any place that is +not protected by the conditions above is risky even in the old tree - you +had been relying on BKL and that's prone to screwups. Old tree had quite +a few holes of that kind - unprotected access to ->d_parent leading to +anything from oops to silent memory corruption. + +--- + +**mandatory** + +FS_NOMOUNT is gone. If you use it - just set SB_NOUSER in flags +(see rootfs for one kind of solution and bdev/socket/pipe for another). + +--- + +**recommended** + +Use bdev_read_only(bdev) instead of is_read_only(kdev). The latter +is still alive, but only because of the mess in drivers/s390/block/dasd.c. +As soon as it gets fixed is_read_only() will die. + +--- + +**mandatory** + +->permission() is called without BKL now. Grab it on entry, drop upon +return - that will guarantee the same locking you used to have. If +your method or its parts do not need BKL - better yet, now you can +shift lock_kernel() and unlock_kernel() so that they would protect +exactly what needs to be protected. + +--- + +**mandatory** + +->statfs() is now called without BKL held. BKL should have been +shifted into individual fs sb_op functions where it's not clear that +it's safe to remove it. If you don't need it, remove it. + +--- + +**mandatory** + +is_read_only() is gone; use bdev_read_only() instead. + +--- + +**mandatory** + +destroy_buffers() is gone; use invalidate_bdev(). + +--- + +**mandatory** + +fsync_dev() is gone; use fsync_bdev(). NOTE: lvm breakage is +deliberate; as soon as struct block_device * is propagated in a reasonable +way by that code fixing will become trivial; until then nothing can be +done. + +**mandatory** + +block truncatation on error exit from ->write_begin, and ->direct_IO +moved from generic methods (block_write_begin, cont_write_begin, +nobh_write_begin, blockdev_direct_IO*) to callers. Take a look at +ext2_write_failed and callers for an example. + +**mandatory** + +->truncate is gone. The whole truncate sequence needs to be +implemented in ->setattr, which is now mandatory for filesystems +implementing on-disk size changes. Start with a copy of the old inode_setattr +and vmtruncate, and the reorder the vmtruncate + foofs_vmtruncate sequence to +be in order of zeroing blocks using block_truncate_page or similar helpers, +size update and on finally on-disk truncation which should not fail. +setattr_prepare (which used to be inode_change_ok) now includes the size checks +for ATTR_SIZE and must be called in the beginning of ->setattr unconditionally. + +**mandatory** + +->clear_inode() and ->delete_inode() are gone; ->evict_inode() should +be used instead. It gets called whenever the inode is evicted, whether it has +remaining links or not. Caller does *not* evict the pagecache or inode-associated +metadata buffers; the method has to use truncate_inode_pages_final() to get rid +of those. Caller makes sure async writeback cannot be running for the inode while +(or after) ->evict_inode() is called. + +->drop_inode() returns int now; it's called on final iput() with +inode->i_lock held and it returns true if filesystems wants the inode to be +dropped. As before, generic_drop_inode() is still the default and it's been +updated appropriately. generic_delete_inode() is also alive and it consists +simply of return 1. Note that all actual eviction work is done by caller after +->drop_inode() returns. + +As before, clear_inode() must be called exactly once on each call of +->evict_inode() (as it used to be for each call of ->delete_inode()). Unlike +before, if you are using inode-associated metadata buffers (i.e. +mark_buffer_dirty_inode()), it's your responsibility to call +invalidate_inode_buffers() before clear_inode(). + +NOTE: checking i_nlink in the beginning of ->write_inode() and bailing out +if it's zero is not *and* *never* *had* *been* enough. Final unlink() and iput() +may happen while the inode is in the middle of ->write_inode(); e.g. if you blindly +free the on-disk inode, you may end up doing that while ->write_inode() is writing +to it. + +--- + +**mandatory** + +.d_delete() now only advises the dcache as to whether or not to cache +unreferenced dentries, and is now only called when the dentry refcount goes to +0. Even on 0 refcount transition, it must be able to tolerate being called 0, +1, or more times (eg. constant, idempotent). + +--- + +**mandatory** + +.d_compare() calling convention and locking rules are significantly +changed. Read updated documentation in Documentation/filesystems/vfs.rst (and +look at examples of other filesystems) for guidance. + +--- + +**mandatory** + +.d_hash() calling convention and locking rules are significantly +changed. Read updated documentation in Documentation/filesystems/vfs.rst (and +look at examples of other filesystems) for guidance. + +--- + +**mandatory** + +dcache_lock is gone, replaced by fine grained locks. See fs/dcache.c +for details of what locks to replace dcache_lock with in order to protect +particular things. Most of the time, a filesystem only needs ->d_lock, which +protects *all* the dcache state of a given dentry. + +--- + +**mandatory** + +Filesystems must RCU-free their inodes, if they can have been accessed +via rcu-walk path walk (basically, if the file can have had a path name in the +vfs namespace). + +Even though i_dentry and i_rcu share storage in a union, we will +initialize the former in inode_init_always(), so just leave it alone in +the callback. It used to be necessary to clean it there, but not anymore +(starting at 3.2). + +--- + +**recommended** + +vfs now tries to do path walking in "rcu-walk mode", which avoids +atomic operations and scalability hazards on dentries and inodes (see +Documentation/filesystems/path-lookup.txt). d_hash and d_compare changes +(above) are examples of the changes required to support this. For more complex +filesystem callbacks, the vfs drops out of rcu-walk mode before the fs call, so +no changes are required to the filesystem. However, this is costly and loses +the benefits of rcu-walk mode. We will begin to add filesystem callbacks that +are rcu-walk aware, shown below. Filesystems should take advantage of this +where possible. + +--- + +**mandatory** + +d_revalidate is a callback that is made on every path element (if +the filesystem provides it), which requires dropping out of rcu-walk mode. This +may now be called in rcu-walk mode (nd->flags & LOOKUP_RCU). -ECHILD should be +returned if the filesystem cannot handle rcu-walk. See +Documentation/filesystems/vfs.rst for more details. + +permission is an inode permission check that is called on many or all +directory inodes on the way down a path walk (to check for exec permission). It +must now be rcu-walk aware (mask & MAY_NOT_BLOCK). See +Documentation/filesystems/vfs.rst for more details. + +--- + +**mandatory** + +In ->fallocate() you must check the mode option passed in. If your +filesystem does not support hole punching (deallocating space in the middle of a +file) you must return -EOPNOTSUPP if FALLOC_FL_PUNCH_HOLE is set in mode. +Currently you can only have FALLOC_FL_PUNCH_HOLE with FALLOC_FL_KEEP_SIZE set, +so the i_size should not change when hole punching, even when puching the end of +a file off. + +--- + +**mandatory** + +->get_sb() is gone. Switch to use of ->mount(). Typically it's just +a matter of switching from calling ``get_sb_``... to ``mount_``... and changing +the function type. If you were doing it manually, just switch from setting +->mnt_root to some pointer to returning that pointer. On errors return +ERR_PTR(...). + +--- + +**mandatory** + +->permission() and generic_permission()have lost flags +argument; instead of passing IPERM_FLAG_RCU we add MAY_NOT_BLOCK into mask. + +generic_permission() has also lost the check_acl argument; ACL checking +has been taken to VFS and filesystems need to provide a non-NULL ->i_op->get_acl +to read an ACL from disk. + +--- + +**mandatory** + +If you implement your own ->llseek() you must handle SEEK_HOLE and +SEEK_DATA. You can hanle this by returning -EINVAL, but it would be nicer to +support it in some way. The generic handler assumes that the entire file is +data and there is a virtual hole at the end of the file. So if the provided +offset is less than i_size and SEEK_DATA is specified, return the same offset. +If the above is true for the offset and you are given SEEK_HOLE, return the end +of the file. If the offset is i_size or greater return -ENXIO in either case. + +**mandatory** + +If you have your own ->fsync() you must make sure to call +filemap_write_and_wait_range() so that all dirty pages are synced out properly. +You must also keep in mind that ->fsync() is not called with i_mutex held +anymore, so if you require i_mutex locking you must make sure to take it and +release it yourself. + +--- + +**mandatory** + +d_alloc_root() is gone, along with a lot of bugs caused by code +misusing it. Replacement: d_make_root(inode). On success d_make_root(inode) +allocates and returns a new dentry instantiated with the passed in inode. +On failure NULL is returned and the passed in inode is dropped so the reference +to inode is consumed in all cases and failure handling need not do any cleanup +for the inode. If d_make_root(inode) is passed a NULL inode it returns NULL +and also requires no further error handling. Typical usage is:: + + inode = foofs_new_inode(....); + s->s_root = d_make_root(inode); + if (!s->s_root) + /* Nothing needed for the inode cleanup */ + return -ENOMEM; + ... + +--- + +**mandatory** + +The witch is dead! Well, 2/3 of it, anyway. ->d_revalidate() and +->lookup() do *not* take struct nameidata anymore; just the flags. + +--- + +**mandatory** + +->create() doesn't take ``struct nameidata *``; unlike the previous +two, it gets "is it an O_EXCL or equivalent?" boolean argument. Note that +local filesystems can ignore tha argument - they are guaranteed that the +object doesn't exist. It's remote/distributed ones that might care... + +--- + +**mandatory** + +FS_REVAL_DOT is gone; if you used to have it, add ->d_weak_revalidate() +in your dentry operations instead. + +--- + +**mandatory** + +vfs_readdir() is gone; switch to iterate_dir() instead + +--- + +**mandatory** + +->readdir() is gone now; switch to ->iterate() + +**mandatory** + +vfs_follow_link has been removed. Filesystems must use nd_set_link +from ->follow_link for normal symlinks, or nd_jump_link for magic +/proc/<pid> style links. + +--- + +**mandatory** + +iget5_locked()/ilookup5()/ilookup5_nowait() test() callback used to be +called with both ->i_lock and inode_hash_lock held; the former is *not* +taken anymore, so verify that your callbacks do not rely on it (none +of the in-tree instances did). inode_hash_lock is still held, +of course, so they are still serialized wrt removal from inode hash, +as well as wrt set() callback of iget5_locked(). + +--- + +**mandatory** + +d_materialise_unique() is gone; d_splice_alias() does everything you +need now. Remember that they have opposite orders of arguments ;-/ + +--- + +**mandatory** + +f_dentry is gone; use f_path.dentry, or, better yet, see if you can avoid +it entirely. + +--- + +**mandatory** + +never call ->read() and ->write() directly; use __vfs_{read,write} or +wrappers; instead of checking for ->write or ->read being NULL, look for +FMODE_CAN_{WRITE,READ} in file->f_mode. + +--- + +**mandatory** + +do _not_ use new_sync_{read,write} for ->read/->write; leave it NULL +instead. + +--- + +**mandatory** + ->aio_read/->aio_write are gone. Use ->read_iter/->write_iter. + +--- + +**recommended** + +for embedded ("fast") symlinks just set inode->i_link to wherever the +symlink body is and use simple_follow_link() as ->follow_link(). + +--- + +**mandatory** + +calling conventions for ->follow_link() have changed. Instead of returning +cookie and using nd_set_link() to store the body to traverse, we return +the body to traverse and store the cookie using explicit void ** argument. +nameidata isn't passed at all - nd_jump_link() doesn't need it and +nd_[gs]et_link() is gone. + +--- + +**mandatory** + +calling conventions for ->put_link() have changed. It gets inode instead of +dentry, it does not get nameidata at all and it gets called only when cookie +is non-NULL. Note that link body isn't available anymore, so if you need it, +store it as cookie. + +--- + +**mandatory** + +any symlink that might use page_follow_link_light/page_put_link() must +have inode_nohighmem(inode) called before anything might start playing with +its pagecache. No highmem pages should end up in the pagecache of such +symlinks. That includes any preseeding that might be done during symlink +creation. __page_symlink() will honour the mapping gfp flags, so once +you've done inode_nohighmem() it's safe to use, but if you allocate and +insert the page manually, make sure to use the right gfp flags. + +--- + +**mandatory** + +->follow_link() is replaced with ->get_link(); same API, except that + + * ->get_link() gets inode as a separate argument + * ->get_link() may be called in RCU mode - in that case NULL + dentry is passed + +--- + +**mandatory** + +->get_link() gets struct delayed_call ``*done`` now, and should do +set_delayed_call() where it used to set ``*cookie``. + +->put_link() is gone - just give the destructor to set_delayed_call() +in ->get_link(). + +--- + +**mandatory** + +->getxattr() and xattr_handler.get() get dentry and inode passed separately. +dentry might be yet to be attached to inode, so do _not_ use its ->d_inode +in the instances. Rationale: !@#!@# security_d_instantiate() needs to be +called before we attach dentry to inode. + +--- + +**mandatory** + +symlinks are no longer the only inodes that do *not* have i_bdev/i_cdev/ +i_pipe/i_link union zeroed out at inode eviction. As the result, you can't +assume that non-NULL value in ->i_nlink at ->destroy_inode() implies that +it's a symlink. Checking ->i_mode is really needed now. In-tree we had +to fix shmem_destroy_callback() that used to take that kind of shortcut; +watch out, since that shortcut is no longer valid. + +--- + +**mandatory** + +->i_mutex is replaced with ->i_rwsem now. inode_lock() et.al. work as +they used to - they just take it exclusive. However, ->lookup() may be +called with parent locked shared. Its instances must not + + * use d_instantiate) and d_rehash() separately - use d_add() or + d_splice_alias() instead. + * use d_rehash() alone - call d_add(new_dentry, NULL) instead. + * in the unlikely case when (read-only) access to filesystem + data structures needs exclusion for some reason, arrange it + yourself. None of the in-tree filesystems needed that. + * rely on ->d_parent and ->d_name not changing after dentry has + been fed to d_add() or d_splice_alias(). Again, none of the + in-tree instances relied upon that. + +We are guaranteed that lookups of the same name in the same directory +will not happen in parallel ("same" in the sense of your ->d_compare()). +Lookups on different names in the same directory can and do happen in +parallel now. + +--- + +**recommended** + +->iterate_shared() is added; it's a parallel variant of ->iterate(). +Exclusion on struct file level is still provided (as well as that +between it and lseek on the same struct file), but if your directory +has been opened several times, you can get these called in parallel. +Exclusion between that method and all directory-modifying ones is +still provided, of course. + +Often enough ->iterate() can serve as ->iterate_shared() without any +changes - it is a read-only operation, after all. If you have any +per-inode or per-dentry in-core data structures modified by ->iterate(), +you might need something to serialize the access to them. If you +do dcache pre-seeding, you'll need to switch to d_alloc_parallel() for +that; look for in-tree examples. + +Old method is only used if the new one is absent; eventually it will +be removed. Switch while you still can; the old one won't stay. + +--- + +**mandatory** + +->atomic_open() calls without O_CREAT may happen in parallel. + +--- + +**mandatory** + +->setxattr() and xattr_handler.set() get dentry and inode passed separately. +dentry might be yet to be attached to inode, so do _not_ use its ->d_inode +in the instances. Rationale: !@#!@# security_d_instantiate() needs to be +called before we attach dentry to inode and !@#!@##!@$!$#!@#$!@$!@$ smack +->d_instantiate() uses not just ->getxattr() but ->setxattr() as well. + +--- + +**mandatory** + +->d_compare() doesn't get parent as a separate argument anymore. If you +used it for finding the struct super_block involved, dentry->d_sb will +work just as well; if it's something more complicated, use dentry->d_parent. +Just be careful not to assume that fetching it more than once will yield +the same value - in RCU mode it could change under you. + +--- + +**mandatory** + +->rename() has an added flags argument. Any flags not handled by the +filesystem should result in EINVAL being returned. + +--- + + +**recommended** + +->readlink is optional for symlinks. Don't set, unless filesystem needs +to fake something for readlink(2). + +--- + +**mandatory** + +->getattr() is now passed a struct path rather than a vfsmount and +dentry separately, and it now has request_mask and query_flags arguments +to specify the fields and sync type requested by statx. Filesystems not +supporting any statx-specific features may ignore the new arguments. + +--- + +**mandatory** + +->atomic_open() calling conventions have changed. Gone is ``int *opened``, +along with FILE_OPENED/FILE_CREATED. In place of those we have +FMODE_OPENED/FMODE_CREATED, set in file->f_mode. Additionally, return +value for 'called finish_no_open(), open it yourself' case has become +0, not 1. Since finish_no_open() itself is returning 0 now, that part +does not need any changes in ->atomic_open() instances. + +--- + +**mandatory** + +alloc_file() has become static now; two wrappers are to be used instead. +alloc_file_pseudo(inode, vfsmount, name, flags, ops) is for the cases +when dentry needs to be created; that's the majority of old alloc_file() +users. Calling conventions: on success a reference to new struct file +is returned and callers reference to inode is subsumed by that. On +failure, ERR_PTR() is returned and no caller's references are affected, +so the caller needs to drop the inode reference it held. +alloc_file_clone(file, flags, ops) does not affect any caller's references. +On success you get a new struct file sharing the mount/dentry with the +original, on failure - ERR_PTR(). + +--- + +**mandatory** + +->clone_file_range() and ->dedupe_file_range have been replaced with +->remap_file_range(). See Documentation/filesystems/vfs.rst for more +information. + +--- + +**recommended** + +->lookup() instances doing an equivalent of:: + + if (IS_ERR(inode)) + return ERR_CAST(inode); + return d_splice_alias(inode, dentry); + +don't need to bother with the check - d_splice_alias() will do the +right thing when given ERR_PTR(...) as inode. Moreover, passing NULL +inode to d_splice_alias() will also do the right thing (equivalent of +d_add(dentry, NULL); return NULL;), so that kind of special cases +also doesn't need a separate treatment. + +--- + +**strongly recommended** + +take the RCU-delayed parts of ->destroy_inode() into a new method - +->free_inode(). If ->destroy_inode() becomes empty - all the better, +just get rid of it. Synchronous work (e.g. the stuff that can't +be done from an RCU callback, or any WARN_ON() where we want the +stack trace) *might* be movable to ->evict_inode(); however, +that goes only for the things that are not needed to balance something +done by ->alloc_inode(). IOW, if it's cleaning up the stuff that +might have accumulated over the life of in-core inode, ->evict_inode() +might be a fit. + +Rules for inode destruction: + + * if ->destroy_inode() is non-NULL, it gets called + * if ->free_inode() is non-NULL, it gets scheduled by call_rcu() + * combination of NULL ->destroy_inode and NULL ->free_inode is + treated as NULL/free_inode_nonrcu, to preserve the compatibility. + +Note that the callback (be it via ->free_inode() or explicit call_rcu() +in ->destroy_inode()) is *NOT* ordered wrt superblock destruction; +as the matter of fact, the superblock and all associated structures +might be already gone. The filesystem driver is guaranteed to be still +there, but that's it. Freeing memory in the callback is fine; doing +more than that is possible, but requires a lot of care and is best +avoided. + +--- + +**mandatory** + +DCACHE_RCUACCESS is gone; having an RCU delay on dentry freeing is the +default. DCACHE_NORCU opts out, and only d_alloc_pseudo() has any +business doing so. + +--- + +**mandatory** + +d_alloc_pseudo() is internal-only; uses outside of alloc_file_pseudo() are +very suspect (and won't work in modules). Such uses are very likely to +be misspelled d_alloc_anon(). + +--- + +**mandatory** + +[should've been added in 2016] stale comment in finish_open() nonwithstanding, +failure exits in ->atomic_open() instances should *NOT* fput() the file, +no matter what. Everything is handled by the caller. + +--- + +**mandatory** + +clone_private_mount() returns a longterm mount now, so the proper destructor of +its result is kern_unmount() or kern_unmount_array(). diff --git a/Documentation/filesystems/proc.rst b/Documentation/filesystems/proc.rst new file mode 100644 index 000000000..533c79e8d --- /dev/null +++ b/Documentation/filesystems/proc.rst @@ -0,0 +1,2216 @@ +.. SPDX-License-Identifier: GPL-2.0 + +==================== +The /proc Filesystem +==================== + +===================== ======================================= ================ +/proc/sys Terrehon Bowden <terrehon@pacbell.net>, October 7 1999 + Bodo Bauer <bb@ricochet.net> +2.4.x update Jorge Nerin <comandante@zaralinux.com> November 14 2000 +move /proc/sys Shen Feng <shen@cn.fujitsu.com> April 1 2009 +fixes/update part 1.1 Stefani Seibold <stefani@seibold.net> June 9 2009 +===================== ======================================= ================ + + + +.. Table of Contents + + 0 Preface + 0.1 Introduction/Credits + 0.2 Legal Stuff + + 1 Collecting System Information + 1.1 Process-Specific Subdirectories + 1.2 Kernel data + 1.3 IDE devices in /proc/ide + 1.4 Networking info in /proc/net + 1.5 SCSI info + 1.6 Parallel port info in /proc/parport + 1.7 TTY info in /proc/tty + 1.8 Miscellaneous kernel statistics in /proc/stat + 1.9 Ext4 file system parameters + + 2 Modifying System Parameters + + 3 Per-Process Parameters + 3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj - Adjust the oom-killer + score + 3.2 /proc/<pid>/oom_score - Display current oom-killer score + 3.3 /proc/<pid>/io - Display the IO accounting fields + 3.4 /proc/<pid>/coredump_filter - Core dump filtering settings + 3.5 /proc/<pid>/mountinfo - Information about mounts + 3.6 /proc/<pid>/comm & /proc/<pid>/task/<tid>/comm + 3.7 /proc/<pid>/task/<tid>/children - Information about task children + 3.8 /proc/<pid>/fdinfo/<fd> - Information about opened file + 3.9 /proc/<pid>/map_files - Information about memory mapped files + 3.10 /proc/<pid>/timerslack_ns - Task timerslack value + 3.11 /proc/<pid>/patch_state - Livepatch patch operation state + 3.12 /proc/<pid>/arch_status - Task architecture specific information + + 4 Configuring procfs + 4.1 Mount options + + 5 Filesystem behavior + +Preface +======= + +0.1 Introduction/Credits +------------------------ + +This documentation is part of a soon (or so we hope) to be released book on +the SuSE Linux distribution. As there is no complete documentation for the +/proc file system and we've used many freely available sources to write these +chapters, it seems only fair to give the work back to the Linux community. +This work is based on the 2.2.* kernel version and the upcoming 2.4.*. I'm +afraid it's still far from complete, but we hope it will be useful. As far as +we know, it is the first 'all-in-one' document about the /proc file system. It +is focused on the Intel x86 hardware, so if you are looking for PPC, ARM, +SPARC, AXP, etc., features, you probably won't find what you are looking for. +It also only covers IPv4 networking, not IPv6 nor other protocols - sorry. But +additions and patches are welcome and will be added to this document if you +mail them to Bodo. + +We'd like to thank Alan Cox, Rik van Riel, and Alexey Kuznetsov and a lot of +other people for help compiling this documentation. We'd also like to extend a +special thank you to Andi Kleen for documentation, which we relied on heavily +to create this document, as well as the additional information he provided. +Thanks to everybody else who contributed source or docs to the Linux kernel +and helped create a great piece of software... :) + +If you have any comments, corrections or additions, please don't hesitate to +contact Bodo Bauer at bb@ricochet.net. We'll be happy to add them to this +document. + +The latest version of this document is available online at +http://tldp.org/LDP/Linux-Filesystem-Hierarchy/html/proc.html + +If the above direction does not works for you, you could try the kernel +mailing list at linux-kernel@vger.kernel.org and/or try to reach me at +comandante@zaralinux.com. + +0.2 Legal Stuff +--------------- + +We don't guarantee the correctness of this document, and if you come to us +complaining about how you screwed up your system because of incorrect +documentation, we won't feel responsible... + +Chapter 1: Collecting System Information +======================================== + +In This Chapter +--------------- +* Investigating the properties of the pseudo file system /proc and its + ability to provide information on the running Linux system +* Examining /proc's structure +* Uncovering various information about the kernel and the processes running + on the system + +------------------------------------------------------------------------------ + +The proc file system acts as an interface to internal data structures in the +kernel. It can be used to obtain information about the system and to change +certain kernel parameters at runtime (sysctl). + +First, we'll take a look at the read-only parts of /proc. In Chapter 2, we +show you how you can use /proc/sys to change settings. + +1.1 Process-Specific Subdirectories +----------------------------------- + +The directory /proc contains (among other things) one subdirectory for each +process running on the system, which is named after the process ID (PID). + +The link 'self' points to the process reading the file system. Each process +subdirectory has the entries listed in Table 1-1. + +Note that an open file descriptor to /proc/<pid> or to any of its +contained files or subdirectories does not prevent <pid> being reused +for some other process in the event that <pid> exits. Operations on +open /proc/<pid> file descriptors corresponding to dead processes +never act on any new process that the kernel may, through chance, have +also assigned the process ID <pid>. Instead, operations on these FDs +usually fail with ESRCH. + +.. table:: Table 1-1: Process specific entries in /proc + + ============= =============================================================== + File Content + ============= =============================================================== + clear_refs Clears page referenced bits shown in smaps output + cmdline Command line arguments + cpu Current and last cpu in which it was executed (2.4)(smp) + cwd Link to the current working directory + environ Values of environment variables + exe Link to the executable of this process + fd Directory, which contains all file descriptors + maps Memory maps to executables and library files (2.4) + mem Memory held by this process + root Link to the root directory of this process + stat Process status + statm Process memory status information + status Process status in human readable form + wchan Present with CONFIG_KALLSYMS=y: it shows the kernel function + symbol the task is blocked in - or "0" if not blocked. + pagemap Page table + stack Report full stack trace, enable via CONFIG_STACKTRACE + smaps An extension based on maps, showing the memory consumption of + each mapping and flags associated with it + smaps_rollup Accumulated smaps stats for all mappings of the process. This + can be derived from smaps, but is faster and more convenient + numa_maps An extension based on maps, showing the memory locality and + binding policy as well as mem usage (in pages) of each mapping. + ============= =============================================================== + +For example, to get the status information of a process, all you have to do is +read the file /proc/PID/status:: + + >cat /proc/self/status + Name: cat + State: R (running) + Tgid: 5452 + Pid: 5452 + PPid: 743 + TracerPid: 0 (2.4) + Uid: 501 501 501 501 + Gid: 100 100 100 100 + FDSize: 256 + Groups: 100 14 16 + VmPeak: 5004 kB + VmSize: 5004 kB + VmLck: 0 kB + VmHWM: 476 kB + VmRSS: 476 kB + RssAnon: 352 kB + RssFile: 120 kB + RssShmem: 4 kB + VmData: 156 kB + VmStk: 88 kB + VmExe: 68 kB + VmLib: 1412 kB + VmPTE: 20 kb + VmSwap: 0 kB + HugetlbPages: 0 kB + CoreDumping: 0 + THP_enabled: 1 + Threads: 1 + SigQ: 0/28578 + SigPnd: 0000000000000000 + ShdPnd: 0000000000000000 + SigBlk: 0000000000000000 + SigIgn: 0000000000000000 + SigCgt: 0000000000000000 + CapInh: 00000000fffffeff + CapPrm: 0000000000000000 + CapEff: 0000000000000000 + CapBnd: ffffffffffffffff + CapAmb: 0000000000000000 + NoNewPrivs: 0 + Seccomp: 0 + Speculation_Store_Bypass: thread vulnerable + voluntary_ctxt_switches: 0 + nonvoluntary_ctxt_switches: 1 + +This shows you nearly the same information you would get if you viewed it with +the ps command. In fact, ps uses the proc file system to obtain its +information. But you get a more detailed view of the process by reading the +file /proc/PID/status. It fields are described in table 1-2. + +The statm file contains more detailed information about the process +memory usage. Its seven fields are explained in Table 1-3. The stat file +contains detailed information about the process itself. Its fields are +explained in Table 1-4. + +(for SMP CONFIG users) + +For making accounting scalable, RSS related information are handled in an +asynchronous manner and the value may not be very precise. To see a precise +snapshot of a moment, you can see /proc/<pid>/smaps file and scan page table. +It's slow but very precise. + +.. table:: Table 1-2: Contents of the status files (as of 4.19) + + ========================== =================================================== + Field Content + ========================== =================================================== + Name filename of the executable + Umask file mode creation mask + State state (R is running, S is sleeping, D is sleeping + in an uninterruptible wait, Z is zombie, + T is traced or stopped) + Tgid thread group ID + Ngid NUMA group ID (0 if none) + Pid process id + PPid process id of the parent process + TracerPid PID of process tracing this process (0 if not) + Uid Real, effective, saved set, and file system UIDs + Gid Real, effective, saved set, and file system GIDs + FDSize number of file descriptor slots currently allocated + Groups supplementary group list + NStgid descendant namespace thread group ID hierarchy + NSpid descendant namespace process ID hierarchy + NSpgid descendant namespace process group ID hierarchy + NSsid descendant namespace session ID hierarchy + VmPeak peak virtual memory size + VmSize total program size + VmLck locked memory size + VmPin pinned memory size + VmHWM peak resident set size ("high water mark") + VmRSS size of memory portions. It contains the three + following parts + (VmRSS = RssAnon + RssFile + RssShmem) + RssAnon size of resident anonymous memory + RssFile size of resident file mappings + RssShmem size of resident shmem memory (includes SysV shm, + mapping of tmpfs and shared anonymous mappings) + VmData size of private data segments + VmStk size of stack segments + VmExe size of text segment + VmLib size of shared library code + VmPTE size of page table entries + VmSwap amount of swap used by anonymous private data + (shmem swap usage is not included) + HugetlbPages size of hugetlb memory portions + CoreDumping process's memory is currently being dumped + (killing the process may lead to a corrupted core) + THP_enabled process is allowed to use THP (returns 0 when + PR_SET_THP_DISABLE is set on the process + Threads number of threads + SigQ number of signals queued/max. number for queue + SigPnd bitmap of pending signals for the thread + ShdPnd bitmap of shared pending signals for the process + SigBlk bitmap of blocked signals + SigIgn bitmap of ignored signals + SigCgt bitmap of caught signals + CapInh bitmap of inheritable capabilities + CapPrm bitmap of permitted capabilities + CapEff bitmap of effective capabilities + CapBnd bitmap of capabilities bounding set + CapAmb bitmap of ambient capabilities + NoNewPrivs no_new_privs, like prctl(PR_GET_NO_NEW_PRIV, ...) + Seccomp seccomp mode, like prctl(PR_GET_SECCOMP, ...) + Speculation_Store_Bypass speculative store bypass mitigation status + Cpus_allowed mask of CPUs on which this process may run + Cpus_allowed_list Same as previous, but in "list format" + Mems_allowed mask of memory nodes allowed to this process + Mems_allowed_list Same as previous, but in "list format" + voluntary_ctxt_switches number of voluntary context switches + nonvoluntary_ctxt_switches number of non voluntary context switches + ========================== =================================================== + + +.. table:: Table 1-3: Contents of the statm files (as of 2.6.8-rc3) + + ======== =============================== ============================== + Field Content + ======== =============================== ============================== + size total program size (pages) (same as VmSize in status) + resident size of memory portions (pages) (same as VmRSS in status) + shared number of pages that are shared (i.e. backed by a file, same + as RssFile+RssShmem in status) + trs number of pages that are 'code' (not including libs; broken, + includes data segment) + lrs number of pages of library (always 0 on 2.6) + drs number of pages of data/stack (including libs; broken, + includes library text) + dt number of dirty pages (always 0 on 2.6) + ======== =============================== ============================== + + +.. table:: Table 1-4: Contents of the stat files (as of 2.6.30-rc7) + + ============= =============================================================== + Field Content + ============= =============================================================== + pid process id + tcomm filename of the executable + state state (R is running, S is sleeping, D is sleeping in an + uninterruptible wait, Z is zombie, T is traced or stopped) + ppid process id of the parent process + pgrp pgrp of the process + sid session id + tty_nr tty the process uses + tty_pgrp pgrp of the tty + flags task flags + min_flt number of minor faults + cmin_flt number of minor faults with child's + maj_flt number of major faults + cmaj_flt number of major faults with child's + utime user mode jiffies + stime kernel mode jiffies + cutime user mode jiffies with child's + cstime kernel mode jiffies with child's + priority priority level + nice nice level + num_threads number of threads + it_real_value (obsolete, always 0) + start_time time the process started after system boot + vsize virtual memory size + rss resident set memory size + rsslim current limit in bytes on the rss + start_code address above which program text can run + end_code address below which program text can run + start_stack address of the start of the main process stack + esp current value of ESP + eip current value of EIP + pending bitmap of pending signals + blocked bitmap of blocked signals + sigign bitmap of ignored signals + sigcatch bitmap of caught signals + 0 (place holder, used to be the wchan address, + use /proc/PID/wchan instead) + 0 (place holder) + 0 (place holder) + exit_signal signal to send to parent thread on exit + task_cpu which CPU the task is scheduled on + rt_priority realtime priority + policy scheduling policy (man sched_setscheduler) + blkio_ticks time spent waiting for block IO + gtime guest time of the task in jiffies + cgtime guest time of the task children in jiffies + start_data address above which program data+bss is placed + end_data address below which program data+bss is placed + start_brk address above which program heap can be expanded with brk() + arg_start address above which program command line is placed + arg_end address below which program command line is placed + env_start address above which program environment is placed + env_end address below which program environment is placed + exit_code the thread's exit_code in the form reported by the waitpid + system call + ============= =============================================================== + +The /proc/PID/maps file contains the currently mapped memory regions and +their access permissions. + +The format is:: + + address perms offset dev inode pathname + + 08048000-08049000 r-xp 00000000 03:00 8312 /opt/test + 08049000-0804a000 rw-p 00001000 03:00 8312 /opt/test + 0804a000-0806b000 rw-p 00000000 00:00 0 [heap] + a7cb1000-a7cb2000 ---p 00000000 00:00 0 + a7cb2000-a7eb2000 rw-p 00000000 00:00 0 + a7eb2000-a7eb3000 ---p 00000000 00:00 0 + a7eb3000-a7ed5000 rw-p 00000000 00:00 0 + a7ed5000-a8008000 r-xp 00000000 03:00 4222 /lib/libc.so.6 + a8008000-a800a000 r--p 00133000 03:00 4222 /lib/libc.so.6 + a800a000-a800b000 rw-p 00135000 03:00 4222 /lib/libc.so.6 + a800b000-a800e000 rw-p 00000000 00:00 0 + a800e000-a8022000 r-xp 00000000 03:00 14462 /lib/libpthread.so.0 + a8022000-a8023000 r--p 00013000 03:00 14462 /lib/libpthread.so.0 + a8023000-a8024000 rw-p 00014000 03:00 14462 /lib/libpthread.so.0 + a8024000-a8027000 rw-p 00000000 00:00 0 + a8027000-a8043000 r-xp 00000000 03:00 8317 /lib/ld-linux.so.2 + a8043000-a8044000 r--p 0001b000 03:00 8317 /lib/ld-linux.so.2 + a8044000-a8045000 rw-p 0001c000 03:00 8317 /lib/ld-linux.so.2 + aff35000-aff4a000 rw-p 00000000 00:00 0 [stack] + ffffe000-fffff000 r-xp 00000000 00:00 0 [vdso] + +where "address" is the address space in the process that it occupies, "perms" +is a set of permissions:: + + r = read + w = write + x = execute + s = shared + p = private (copy on write) + +"offset" is the offset into the mapping, "dev" is the device (major:minor), and +"inode" is the inode on that device. 0 indicates that no inode is associated +with the memory region, as the case would be with BSS (uninitialized data). +The "pathname" shows the name associated file for this mapping. If the mapping +is not associated with a file: + + ======= ==================================== + [heap] the heap of the program + [stack] the stack of the main process + [vdso] the "virtual dynamic shared object", + the kernel system call handler + ======= ==================================== + + or if empty, the mapping is anonymous. + +The /proc/PID/smaps is an extension based on maps, showing the memory +consumption for each of the process's mappings. For each mapping (aka Virtual +Memory Area, or VMA) there is a series of lines such as the following:: + + 08048000-080bc000 r-xp 00000000 03:02 13130 /bin/bash + + Size: 1084 kB + KernelPageSize: 4 kB + MMUPageSize: 4 kB + Rss: 892 kB + Pss: 374 kB + Shared_Clean: 892 kB + Shared_Dirty: 0 kB + Private_Clean: 0 kB + Private_Dirty: 0 kB + Referenced: 892 kB + Anonymous: 0 kB + LazyFree: 0 kB + AnonHugePages: 0 kB + ShmemPmdMapped: 0 kB + Shared_Hugetlb: 0 kB + Private_Hugetlb: 0 kB + Swap: 0 kB + SwapPss: 0 kB + KernelPageSize: 4 kB + MMUPageSize: 4 kB + Locked: 0 kB + THPeligible: 0 + VmFlags: rd ex mr mw me dw + +The first of these lines shows the same information as is displayed for the +mapping in /proc/PID/maps. Following lines show the size of the mapping +(size); the size of each page allocated when backing a VMA (KernelPageSize), +which is usually the same as the size in the page table entries; the page size +used by the MMU when backing a VMA (in most cases, the same as KernelPageSize); +the amount of the mapping that is currently resident in RAM (RSS); the +process' proportional share of this mapping (PSS); and the number of clean and +dirty shared and private pages in the mapping. + +The "proportional set size" (PSS) of a process is the count of pages it has +in memory, where each page is divided by the number of processes sharing it. +So if a process has 1000 pages all to itself, and 1000 shared with one other +process, its PSS will be 1500. + +Note that even a page which is part of a MAP_SHARED mapping, but has only +a single pte mapped, i.e. is currently used by only one process, is accounted +as private and not as shared. + +"Referenced" indicates the amount of memory currently marked as referenced or +accessed. + +"Anonymous" shows the amount of memory that does not belong to any file. Even +a mapping associated with a file may contain anonymous pages: when MAP_PRIVATE +and a page is modified, the file page is replaced by a private anonymous copy. + +"LazyFree" shows the amount of memory which is marked by madvise(MADV_FREE). +The memory isn't freed immediately with madvise(). It's freed in memory +pressure if the memory is clean. Please note that the printed value might +be lower than the real value due to optimizations used in the current +implementation. If this is not desirable please file a bug report. + +"AnonHugePages" shows the ammount of memory backed by transparent hugepage. + +"ShmemPmdMapped" shows the ammount of shared (shmem/tmpfs) memory backed by +huge pages. + +"Shared_Hugetlb" and "Private_Hugetlb" show the ammounts of memory backed by +hugetlbfs page which is *not* counted in "RSS" or "PSS" field for historical +reasons. And these are not included in {Shared,Private}_{Clean,Dirty} field. + +"Swap" shows how much would-be-anonymous memory is also used, but out on swap. + +For shmem mappings, "Swap" includes also the size of the mapped (and not +replaced by copy-on-write) part of the underlying shmem object out on swap. +"SwapPss" shows proportional swap share of this mapping. Unlike "Swap", this +does not take into account swapped out page of underlying shmem objects. +"Locked" indicates whether the mapping is locked in memory or not. +"THPeligible" indicates whether the mapping is eligible for allocating THP +pages - 1 if true, 0 otherwise. It just shows the current status. + +"VmFlags" field deserves a separate description. This member represents the +kernel flags associated with the particular virtual memory area in two letter +encoded manner. The codes are the following: + + == ======================================= + rd readable + wr writeable + ex executable + sh shared + mr may read + mw may write + me may execute + ms may share + gd stack segment growns down + pf pure PFN range + dw disabled write to the mapped file + lo pages are locked in memory + io memory mapped I/O area + sr sequential read advise provided + rr random read advise provided + dc do not copy area on fork + de do not expand area on remapping + ac area is accountable + nr swap space is not reserved for the area + ht area uses huge tlb pages + ar architecture specific flag + dd do not include area into core dump + sd soft dirty flag + mm mixed map area + hg huge page advise flag + nh no huge page advise flag + mg mergable advise flag + bt arm64 BTI guarded page + == ======================================= + +Note that there is no guarantee that every flag and associated mnemonic will +be present in all further kernel releases. Things get changed, the flags may +be vanished or the reverse -- new added. Interpretation of their meaning +might change in future as well. So each consumer of these flags has to +follow each specific kernel version for the exact semantic. + +This file is only present if the CONFIG_MMU kernel configuration option is +enabled. + +Note: reading /proc/PID/maps or /proc/PID/smaps is inherently racy (consistent +output can be achieved only in the single read call). + +This typically manifests when doing partial reads of these files while the +memory map is being modified. Despite the races, we do provide the following +guarantees: + +1) The mapped addresses never go backwards, which implies no two + regions will ever overlap. +2) If there is something at a given vaddr during the entirety of the + life of the smaps/maps walk, there will be some output for it. + +The /proc/PID/smaps_rollup file includes the same fields as /proc/PID/smaps, +but their values are the sums of the corresponding values for all mappings of +the process. Additionally, it contains these fields: + +- Pss_Anon +- Pss_File +- Pss_Shmem + +They represent the proportional shares of anonymous, file, and shmem pages, as +described for smaps above. These fields are omitted in smaps since each +mapping identifies the type (anon, file, or shmem) of all pages it contains. +Thus all information in smaps_rollup can be derived from smaps, but at a +significantly higher cost. + +The /proc/PID/clear_refs is used to reset the PG_Referenced and ACCESSED/YOUNG +bits on both physical and virtual pages associated with a process, and the +soft-dirty bit on pte (see Documentation/admin-guide/mm/soft-dirty.rst +for details). +To clear the bits for all the pages associated with the process:: + + > echo 1 > /proc/PID/clear_refs + +To clear the bits for the anonymous pages associated with the process:: + + > echo 2 > /proc/PID/clear_refs + +To clear the bits for the file mapped pages associated with the process:: + + > echo 3 > /proc/PID/clear_refs + +To clear the soft-dirty bit:: + + > echo 4 > /proc/PID/clear_refs + +To reset the peak resident set size ("high water mark") to the process's +current value:: + + > echo 5 > /proc/PID/clear_refs + +Any other value written to /proc/PID/clear_refs will have no effect. + +The /proc/pid/pagemap gives the PFN, which can be used to find the pageflags +using /proc/kpageflags and number of times a page is mapped using +/proc/kpagecount. For detailed explanation, see +Documentation/admin-guide/mm/pagemap.rst. + +The /proc/pid/numa_maps is an extension based on maps, showing the memory +locality and binding policy, as well as the memory usage (in pages) of +each mapping. The output follows a general format where mapping details get +summarized separated by blank spaces, one mapping per each file line:: + + address policy mapping details + + 00400000 default file=/usr/local/bin/app mapped=1 active=0 N3=1 kernelpagesize_kB=4 + 00600000 default file=/usr/local/bin/app anon=1 dirty=1 N3=1 kernelpagesize_kB=4 + 3206000000 default file=/lib64/ld-2.12.so mapped=26 mapmax=6 N0=24 N3=2 kernelpagesize_kB=4 + 320621f000 default file=/lib64/ld-2.12.so anon=1 dirty=1 N3=1 kernelpagesize_kB=4 + 3206220000 default file=/lib64/ld-2.12.so anon=1 dirty=1 N3=1 kernelpagesize_kB=4 + 3206221000 default anon=1 dirty=1 N3=1 kernelpagesize_kB=4 + 3206800000 default file=/lib64/libc-2.12.so mapped=59 mapmax=21 active=55 N0=41 N3=18 kernelpagesize_kB=4 + 320698b000 default file=/lib64/libc-2.12.so + 3206b8a000 default file=/lib64/libc-2.12.so anon=2 dirty=2 N3=2 kernelpagesize_kB=4 + 3206b8e000 default file=/lib64/libc-2.12.so anon=1 dirty=1 N3=1 kernelpagesize_kB=4 + 3206b8f000 default anon=3 dirty=3 active=1 N3=3 kernelpagesize_kB=4 + 7f4dc10a2000 default anon=3 dirty=3 N3=3 kernelpagesize_kB=4 + 7f4dc10b4000 default anon=2 dirty=2 active=1 N3=2 kernelpagesize_kB=4 + 7f4dc1200000 default file=/anon_hugepage\040(deleted) huge anon=1 dirty=1 N3=1 kernelpagesize_kB=2048 + 7fff335f0000 default stack anon=3 dirty=3 N3=3 kernelpagesize_kB=4 + 7fff3369d000 default mapped=1 mapmax=35 active=0 N3=1 kernelpagesize_kB=4 + +Where: + +"address" is the starting address for the mapping; + +"policy" reports the NUMA memory policy set for the mapping (see Documentation/admin-guide/mm/numa_memory_policy.rst); + +"mapping details" summarizes mapping data such as mapping type, page usage counters, +node locality page counters (N0 == node0, N1 == node1, ...) and the kernel page +size, in KB, that is backing the mapping up. + +1.2 Kernel data +--------------- + +Similar to the process entries, the kernel data files give information about +the running kernel. The files used to obtain this information are contained in +/proc and are listed in Table 1-5. Not all of these will be present in your +system. It depends on the kernel configuration and the loaded modules, which +files are there, and which are missing. + +.. table:: Table 1-5: Kernel info in /proc + + ============ =============================================================== + File Content + ============ =============================================================== + apm Advanced power management info + buddyinfo Kernel memory allocator information (see text) (2.5) + bus Directory containing bus specific information + cmdline Kernel command line + cpuinfo Info about the CPU + devices Available devices (block and character) + dma Used DMS channels + filesystems Supported filesystems + driver Various drivers grouped here, currently rtc (2.4) + execdomains Execdomains, related to security (2.4) + fb Frame Buffer devices (2.4) + fs File system parameters, currently nfs/exports (2.4) + ide Directory containing info about the IDE subsystem + interrupts Interrupt usage + iomem Memory map (2.4) + ioports I/O port usage + irq Masks for irq to cpu affinity (2.4)(smp?) + isapnp ISA PnP (Plug&Play) Info (2.4) + kcore Kernel core image (can be ELF or A.OUT(deprecated in 2.4)) + kmsg Kernel messages + ksyms Kernel symbol table + loadavg Load average of last 1, 5 & 15 minutes + locks Kernel locks + meminfo Memory info + misc Miscellaneous + modules List of loaded modules + mounts Mounted filesystems + net Networking info (see text) + pagetypeinfo Additional page allocator information (see text) (2.5) + partitions Table of partitions known to the system + pci Deprecated info of PCI bus (new way -> /proc/bus/pci/, + decoupled by lspci (2.4) + rtc Real time clock + scsi SCSI info (see text) + slabinfo Slab pool info + softirqs softirq usage + stat Overall statistics + swaps Swap space utilization + sys See chapter 2 + sysvipc Info of SysVIPC Resources (msg, sem, shm) (2.4) + tty Info of tty drivers + uptime Wall clock since boot, combined idle time of all cpus + version Kernel version + video bttv info of video resources (2.4) + vmallocinfo Show vmalloced areas + ============ =============================================================== + +You can, for example, check which interrupts are currently in use and what +they are used for by looking in the file /proc/interrupts:: + + > cat /proc/interrupts + CPU0 + 0: 8728810 XT-PIC timer + 1: 895 XT-PIC keyboard + 2: 0 XT-PIC cascade + 3: 531695 XT-PIC aha152x + 4: 2014133 XT-PIC serial + 5: 44401 XT-PIC pcnet_cs + 8: 2 XT-PIC rtc + 11: 8 XT-PIC i82365 + 12: 182918 XT-PIC PS/2 Mouse + 13: 1 XT-PIC fpu + 14: 1232265 XT-PIC ide0 + 15: 7 XT-PIC ide1 + NMI: 0 + +In 2.4.* a couple of lines where added to this file LOC & ERR (this time is the +output of a SMP machine):: + + > cat /proc/interrupts + + CPU0 CPU1 + 0: 1243498 1214548 IO-APIC-edge timer + 1: 8949 8958 IO-APIC-edge keyboard + 2: 0 0 XT-PIC cascade + 5: 11286 10161 IO-APIC-edge soundblaster + 8: 1 0 IO-APIC-edge rtc + 9: 27422 27407 IO-APIC-edge 3c503 + 12: 113645 113873 IO-APIC-edge PS/2 Mouse + 13: 0 0 XT-PIC fpu + 14: 22491 24012 IO-APIC-edge ide0 + 15: 2183 2415 IO-APIC-edge ide1 + 17: 30564 30414 IO-APIC-level eth0 + 18: 177 164 IO-APIC-level bttv + NMI: 2457961 2457959 + LOC: 2457882 2457881 + ERR: 2155 + +NMI is incremented in this case because every timer interrupt generates a NMI +(Non Maskable Interrupt) which is used by the NMI Watchdog to detect lockups. + +LOC is the local interrupt counter of the internal APIC of every CPU. + +ERR is incremented in the case of errors in the IO-APIC bus (the bus that +connects the CPUs in a SMP system. This means that an error has been detected, +the IO-APIC automatically retry the transmission, so it should not be a big +problem, but you should read the SMP-FAQ. + +In 2.6.2* /proc/interrupts was expanded again. This time the goal was for +/proc/interrupts to display every IRQ vector in use by the system, not +just those considered 'most important'. The new vectors are: + +THR + interrupt raised when a machine check threshold counter + (typically counting ECC corrected errors of memory or cache) exceeds + a configurable threshold. Only available on some systems. + +TRM + a thermal event interrupt occurs when a temperature threshold + has been exceeded for the CPU. This interrupt may also be generated + when the temperature drops back to normal. + +SPU + a spurious interrupt is some interrupt that was raised then lowered + by some IO device before it could be fully processed by the APIC. Hence + the APIC sees the interrupt but does not know what device it came from. + For this case the APIC will generate the interrupt with a IRQ vector + of 0xff. This might also be generated by chipset bugs. + +RES, CAL, TLB + rescheduling, call and TLB flush interrupts are + sent from one CPU to another per the needs of the OS. Typically, + their statistics are used by kernel developers and interested users to + determine the occurrence of interrupts of the given type. + +The above IRQ vectors are displayed only when relevant. For example, +the threshold vector does not exist on x86_64 platforms. Others are +suppressed when the system is a uniprocessor. As of this writing, only +i386 and x86_64 platforms support the new IRQ vector displays. + +Of some interest is the introduction of the /proc/irq directory to 2.4. +It could be used to set IRQ to CPU affinity. This means that you can "hook" an +IRQ to only one CPU, or to exclude a CPU of handling IRQs. The contents of the +irq subdir is one subdir for each IRQ, and two files; default_smp_affinity and +prof_cpu_mask. + +For example:: + + > ls /proc/irq/ + 0 10 12 14 16 18 2 4 6 8 prof_cpu_mask + 1 11 13 15 17 19 3 5 7 9 default_smp_affinity + > ls /proc/irq/0/ + smp_affinity + +smp_affinity is a bitmask, in which you can specify which CPUs can handle the +IRQ. You can set it by doing:: + + > echo 1 > /proc/irq/10/smp_affinity + +This means that only the first CPU will handle the IRQ, but you can also echo +5 which means that only the first and third CPU can handle the IRQ. + +The contents of each smp_affinity file is the same by default:: + + > cat /proc/irq/0/smp_affinity + ffffffff + +There is an alternate interface, smp_affinity_list which allows specifying +a CPU range instead of a bitmask:: + + > cat /proc/irq/0/smp_affinity_list + 1024-1031 + +The default_smp_affinity mask applies to all non-active IRQs, which are the +IRQs which have not yet been allocated/activated, and hence which lack a +/proc/irq/[0-9]* directory. + +The node file on an SMP system shows the node to which the device using the IRQ +reports itself as being attached. This hardware locality information does not +include information about any possible driver locality preference. + +prof_cpu_mask specifies which CPUs are to be profiled by the system wide +profiler. Default value is ffffffff (all CPUs if there are only 32 of them). + +The way IRQs are routed is handled by the IO-APIC, and it's Round Robin +between all the CPUs which are allowed to handle it. As usual the kernel has +more info than you and does a better job than you, so the defaults are the +best choice for almost everyone. [Note this applies only to those IO-APIC's +that support "Round Robin" interrupt distribution.] + +There are three more important subdirectories in /proc: net, scsi, and sys. +The general rule is that the contents, or even the existence of these +directories, depend on your kernel configuration. If SCSI is not enabled, the +directory scsi may not exist. The same is true with the net, which is there +only when networking support is present in the running kernel. + +The slabinfo file gives information about memory usage at the slab level. +Linux uses slab pools for memory management above page level in version 2.2. +Commonly used objects have their own slab pool (such as network buffers, +directory cache, and so on). + +:: + + > cat /proc/buddyinfo + + Node 0, zone DMA 0 4 5 4 4 3 ... + Node 0, zone Normal 1 0 0 1 101 8 ... + Node 0, zone HighMem 2 0 0 1 1 0 ... + +External fragmentation is a problem under some workloads, and buddyinfo is a +useful tool for helping diagnose these problems. Buddyinfo will give you a +clue as to how big an area you can safely allocate, or why a previous +allocation failed. + +Each column represents the number of pages of a certain order which are +available. In this case, there are 0 chunks of 2^0*PAGE_SIZE available in +ZONE_DMA, 4 chunks of 2^1*PAGE_SIZE in ZONE_DMA, 101 chunks of 2^4*PAGE_SIZE +available in ZONE_NORMAL, etc... + +More information relevant to external fragmentation can be found in +pagetypeinfo:: + + > cat /proc/pagetypeinfo + Page block order: 9 + Pages per block: 512 + + Free pages count per migrate type at order 0 1 2 3 4 5 6 7 8 9 10 + Node 0, zone DMA, type Unmovable 0 0 0 1 1 1 1 1 1 1 0 + Node 0, zone DMA, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0 + Node 0, zone DMA, type Movable 1 1 2 1 2 1 1 0 1 0 2 + Node 0, zone DMA, type Reserve 0 0 0 0 0 0 0 0 0 1 0 + Node 0, zone DMA, type Isolate 0 0 0 0 0 0 0 0 0 0 0 + Node 0, zone DMA32, type Unmovable 103 54 77 1 1 1 11 8 7 1 9 + Node 0, zone DMA32, type Reclaimable 0 0 2 1 0 0 0 0 1 0 0 + Node 0, zone DMA32, type Movable 169 152 113 91 77 54 39 13 6 1 452 + Node 0, zone DMA32, type Reserve 1 2 2 2 2 0 1 1 1 1 0 + Node 0, zone DMA32, type Isolate 0 0 0 0 0 0 0 0 0 0 0 + + Number of blocks type Unmovable Reclaimable Movable Reserve Isolate + Node 0, zone DMA 2 0 5 1 0 + Node 0, zone DMA32 41 6 967 2 0 + +Fragmentation avoidance in the kernel works by grouping pages of different +migrate types into the same contiguous regions of memory called page blocks. +A page block is typically the size of the default hugepage size, e.g. 2MB on +X86-64. By keeping pages grouped based on their ability to move, the kernel +can reclaim pages within a page block to satisfy a high-order allocation. + +The pagetypinfo begins with information on the size of a page block. It +then gives the same type of information as buddyinfo except broken down +by migrate-type and finishes with details on how many page blocks of each +type exist. + +If min_free_kbytes has been tuned correctly (recommendations made by hugeadm +from libhugetlbfs https://github.com/libhugetlbfs/libhugetlbfs/), one can +make an estimate of the likely number of huge pages that can be allocated +at a given point in time. All the "Movable" blocks should be allocatable +unless memory has been mlock()'d. Some of the Reclaimable blocks should +also be allocatable although a lot of filesystem metadata may have to be +reclaimed to achieve this. + + +meminfo +~~~~~~~ + +Provides information about distribution and utilization of memory. This +varies by architecture and compile options. The following is from a +16GB PIII, which has highmem enabled. You may not have all of these fields. + +:: + + > cat /proc/meminfo + + MemTotal: 16344972 kB + MemFree: 13634064 kB + MemAvailable: 14836172 kB + Buffers: 3656 kB + Cached: 1195708 kB + SwapCached: 0 kB + Active: 891636 kB + Inactive: 1077224 kB + HighTotal: 15597528 kB + HighFree: 13629632 kB + LowTotal: 747444 kB + LowFree: 4432 kB + SwapTotal: 0 kB + SwapFree: 0 kB + Dirty: 968 kB + Writeback: 0 kB + AnonPages: 861800 kB + Mapped: 280372 kB + Shmem: 644 kB + KReclaimable: 168048 kB + Slab: 284364 kB + SReclaimable: 159856 kB + SUnreclaim: 124508 kB + PageTables: 24448 kB + NFS_Unstable: 0 kB + Bounce: 0 kB + WritebackTmp: 0 kB + CommitLimit: 7669796 kB + Committed_AS: 100056 kB + VmallocTotal: 112216 kB + VmallocUsed: 428 kB + VmallocChunk: 111088 kB + Percpu: 62080 kB + HardwareCorrupted: 0 kB + AnonHugePages: 49152 kB + ShmemHugePages: 0 kB + ShmemPmdMapped: 0 kB + +MemTotal + Total usable RAM (i.e. physical RAM minus a few reserved + bits and the kernel binary code) +MemFree + The sum of LowFree+HighFree +MemAvailable + An estimate of how much memory is available for starting new + applications, without swapping. Calculated from MemFree, + SReclaimable, the size of the file LRU lists, and the low + watermarks in each zone. + The estimate takes into account that the system needs some + page cache to function well, and that not all reclaimable + slab will be reclaimable, due to items being in use. The + impact of those factors will vary from system to system. +Buffers + Relatively temporary storage for raw disk blocks + shouldn't get tremendously large (20MB or so) +Cached + in-memory cache for files read from the disk (the + pagecache). Doesn't include SwapCached +SwapCached + Memory that once was swapped out, is swapped back in but + still also is in the swapfile (if memory is needed it + doesn't need to be swapped out AGAIN because it is already + in the swapfile. This saves I/O) +Active + Memory that has been used more recently and usually not + reclaimed unless absolutely necessary. +Inactive + Memory which has been less recently used. It is more + eligible to be reclaimed for other purposes +HighTotal, HighFree + Highmem is all memory above ~860MB of physical memory. + Highmem areas are for use by userspace programs, or + for the pagecache. The kernel must use tricks to access + this memory, making it slower to access than lowmem. +LowTotal, LowFree + Lowmem is memory which can be used for everything that + highmem can be used for, but it is also available for the + kernel's use for its own data structures. Among many + other things, it is where everything from the Slab is + allocated. Bad things happen when you're out of lowmem. +SwapTotal + total amount of swap space available +SwapFree + Memory which has been evicted from RAM, and is temporarily + on the disk +Dirty + Memory which is waiting to get written back to the disk +Writeback + Memory which is actively being written back to the disk +AnonPages + Non-file backed pages mapped into userspace page tables +HardwareCorrupted + The amount of RAM/memory in KB, the kernel identifies as + corrupted. +AnonHugePages + Non-file backed huge pages mapped into userspace page tables +Mapped + files which have been mmaped, such as libraries +Shmem + Total memory used by shared memory (shmem) and tmpfs +ShmemHugePages + Memory used by shared memory (shmem) and tmpfs allocated + with huge pages +ShmemPmdMapped + Shared memory mapped into userspace with huge pages +KReclaimable + Kernel allocations that the kernel will attempt to reclaim + under memory pressure. Includes SReclaimable (below), and other + direct allocations with a shrinker. +Slab + in-kernel data structures cache +SReclaimable + Part of Slab, that might be reclaimed, such as caches +SUnreclaim + Part of Slab, that cannot be reclaimed on memory pressure +PageTables + amount of memory dedicated to the lowest level of page + tables. +NFS_Unstable + Always zero. Previous counted pages which had been written to + the server, but has not been committed to stable storage. +Bounce + Memory used for block device "bounce buffers" +WritebackTmp + Memory used by FUSE for temporary writeback buffers +CommitLimit + Based on the overcommit ratio ('vm.overcommit_ratio'), + this is the total amount of memory currently available to + be allocated on the system. This limit is only adhered to + if strict overcommit accounting is enabled (mode 2 in + 'vm.overcommit_memory'). + + The CommitLimit is calculated with the following formula:: + + CommitLimit = ([total RAM pages] - [total huge TLB pages]) * + overcommit_ratio / 100 + [total swap pages] + + For example, on a system with 1G of physical RAM and 7G + of swap with a `vm.overcommit_ratio` of 30 it would + yield a CommitLimit of 7.3G. + + For more details, see the memory overcommit documentation + in vm/overcommit-accounting. +Committed_AS + The amount of memory presently allocated on the system. + The committed memory is a sum of all of the memory which + has been allocated by processes, even if it has not been + "used" by them as of yet. A process which malloc()'s 1G + of memory, but only touches 300M of it will show up as + using 1G. This 1G is memory which has been "committed" to + by the VM and can be used at any time by the allocating + application. With strict overcommit enabled on the system + (mode 2 in 'vm.overcommit_memory'), allocations which would + exceed the CommitLimit (detailed above) will not be permitted. + This is useful if one needs to guarantee that processes will + not fail due to lack of memory once that memory has been + successfully allocated. +VmallocTotal + total size of vmalloc memory area +VmallocUsed + amount of vmalloc area which is used +VmallocChunk + largest contiguous block of vmalloc area which is free +Percpu + Memory allocated to the percpu allocator used to back percpu + allocations. This stat excludes the cost of metadata. + +vmallocinfo +~~~~~~~~~~~ + +Provides information about vmalloced/vmaped areas. One line per area, +containing the virtual address range of the area, size in bytes, +caller information of the creator, and optional information depending +on the kind of area: + + ========== =================================================== + pages=nr number of pages + phys=addr if a physical address was specified + ioremap I/O mapping (ioremap() and friends) + vmalloc vmalloc() area + vmap vmap()ed pages + user VM_USERMAP area + vpages buffer for pages pointers was vmalloced (huge area) + N<node>=nr (Only on NUMA kernels) + Number of pages allocated on memory node <node> + ========== =================================================== + +:: + + > cat /proc/vmallocinfo + 0xffffc20000000000-0xffffc20000201000 2101248 alloc_large_system_hash+0x204 ... + /0x2c0 pages=512 vmalloc N0=128 N1=128 N2=128 N3=128 + 0xffffc20000201000-0xffffc20000302000 1052672 alloc_large_system_hash+0x204 ... + /0x2c0 pages=256 vmalloc N0=64 N1=64 N2=64 N3=64 + 0xffffc20000302000-0xffffc20000304000 8192 acpi_tb_verify_table+0x21/0x4f... + phys=7fee8000 ioremap + 0xffffc20000304000-0xffffc20000307000 12288 acpi_tb_verify_table+0x21/0x4f... + phys=7fee7000 ioremap + 0xffffc2000031d000-0xffffc2000031f000 8192 init_vdso_vars+0x112/0x210 + 0xffffc2000031f000-0xffffc2000032b000 49152 cramfs_uncompress_init+0x2e ... + /0x80 pages=11 vmalloc N0=3 N1=3 N2=2 N3=3 + 0xffffc2000033a000-0xffffc2000033d000 12288 sys_swapon+0x640/0xac0 ... + pages=2 vmalloc N1=2 + 0xffffc20000347000-0xffffc2000034c000 20480 xt_alloc_table_info+0xfe ... + /0x130 [x_tables] pages=4 vmalloc N0=4 + 0xffffffffa0000000-0xffffffffa000f000 61440 sys_init_module+0xc27/0x1d00 ... + pages=14 vmalloc N2=14 + 0xffffffffa000f000-0xffffffffa0014000 20480 sys_init_module+0xc27/0x1d00 ... + pages=4 vmalloc N1=4 + 0xffffffffa0014000-0xffffffffa0017000 12288 sys_init_module+0xc27/0x1d00 ... + pages=2 vmalloc N1=2 + 0xffffffffa0017000-0xffffffffa0022000 45056 sys_init_module+0xc27/0x1d00 ... + pages=10 vmalloc N0=10 + + +softirqs +~~~~~~~~ + +Provides counts of softirq handlers serviced since boot time, for each CPU. + +:: + + > cat /proc/softirqs + CPU0 CPU1 CPU2 CPU3 + HI: 0 0 0 0 + TIMER: 27166 27120 27097 27034 + NET_TX: 0 0 0 17 + NET_RX: 42 0 0 39 + BLOCK: 0 0 107 1121 + TASKLET: 0 0 0 290 + SCHED: 27035 26983 26971 26746 + HRTIMER: 0 0 0 0 + RCU: 1678 1769 2178 2250 + + +1.3 IDE devices in /proc/ide +---------------------------- + +The subdirectory /proc/ide contains information about all IDE devices of which +the kernel is aware. There is one subdirectory for each IDE controller, the +file drivers and a link for each IDE device, pointing to the device directory +in the controller specific subtree. + +The file 'drivers' contains general information about the drivers used for the +IDE devices:: + + > cat /proc/ide/drivers + ide-cdrom version 4.53 + ide-disk version 1.08 + +More detailed information can be found in the controller specific +subdirectories. These are named ide0, ide1 and so on. Each of these +directories contains the files shown in table 1-6. + + +.. table:: Table 1-6: IDE controller info in /proc/ide/ide? + + ======= ======================================= + File Content + ======= ======================================= + channel IDE channel (0 or 1) + config Configuration (only for PCI/IDE bridge) + mate Mate name + model Type/Chipset of IDE controller + ======= ======================================= + +Each device connected to a controller has a separate subdirectory in the +controllers directory. The files listed in table 1-7 are contained in these +directories. + + +.. table:: Table 1-7: IDE device information + + ================ ========================================== + File Content + ================ ========================================== + cache The cache + capacity Capacity of the medium (in 512Byte blocks) + driver driver and version + geometry physical and logical geometry + identify device identify block + media media type + model device identifier + settings device setup + smart_thresholds IDE disk management thresholds + smart_values IDE disk management values + ================ ========================================== + +The most interesting file is ``settings``. This file contains a nice +overview of the drive parameters:: + + # cat /proc/ide/ide0/hda/settings + name value min max mode + ---- ----- --- --- ---- + bios_cyl 526 0 65535 rw + bios_head 255 0 255 rw + bios_sect 63 0 63 rw + breada_readahead 4 0 127 rw + bswap 0 0 1 r + file_readahead 72 0 2097151 rw + io_32bit 0 0 3 rw + keepsettings 0 0 1 rw + max_kb_per_request 122 1 127 rw + multcount 0 0 8 rw + nice1 1 0 1 rw + nowerr 0 0 1 rw + pio_mode write-only 0 255 w + slow 0 0 1 rw + unmaskirq 0 0 1 rw + using_dma 0 0 1 rw + + +1.4 Networking info in /proc/net +-------------------------------- + +The subdirectory /proc/net follows the usual pattern. Table 1-8 shows the +additional values you get for IP version 6 if you configure the kernel to +support this. Table 1-9 lists the files and their meaning. + + +.. table:: Table 1-8: IPv6 info in /proc/net + + ========== ===================================================== + File Content + ========== ===================================================== + udp6 UDP sockets (IPv6) + tcp6 TCP sockets (IPv6) + raw6 Raw device statistics (IPv6) + igmp6 IP multicast addresses, which this host joined (IPv6) + if_inet6 List of IPv6 interface addresses + ipv6_route Kernel routing table for IPv6 + rt6_stats Global IPv6 routing tables statistics + sockstat6 Socket statistics (IPv6) + snmp6 Snmp data (IPv6) + ========== ===================================================== + +.. table:: Table 1-9: Network info in /proc/net + + ============= ================================================================ + File Content + ============= ================================================================ + arp Kernel ARP table + dev network devices with statistics + dev_mcast the Layer2 multicast groups a device is listening too + (interface index, label, number of references, number of bound + addresses). + dev_stat network device status + ip_fwchains Firewall chain linkage + ip_fwnames Firewall chain names + ip_masq Directory containing the masquerading tables + ip_masquerade Major masquerading table + netstat Network statistics + raw raw device statistics + route Kernel routing table + rpc Directory containing rpc info + rt_cache Routing cache + snmp SNMP data + sockstat Socket statistics + tcp TCP sockets + udp UDP sockets + unix UNIX domain sockets + wireless Wireless interface data (Wavelan etc) + igmp IP multicast addresses, which this host joined + psched Global packet scheduler parameters. + netlink List of PF_NETLINK sockets + ip_mr_vifs List of multicast virtual interfaces + ip_mr_cache List of multicast routing cache + ============= ================================================================ + +You can use this information to see which network devices are available in +your system and how much traffic was routed over those devices:: + + > cat /proc/net/dev + Inter-|Receive |[... + face |bytes packets errs drop fifo frame compressed multicast|[... + lo: 908188 5596 0 0 0 0 0 0 [... + ppp0:15475140 20721 410 0 0 410 0 0 [... + eth0: 614530 7085 0 0 0 0 0 1 [... + + ...] Transmit + ...] bytes packets errs drop fifo colls carrier compressed + ...] 908188 5596 0 0 0 0 0 0 + ...] 1375103 17405 0 0 0 0 0 0 + ...] 1703981 5535 0 0 0 3 0 0 + +In addition, each Channel Bond interface has its own directory. For +example, the bond0 device will have a directory called /proc/net/bond0/. +It will contain information that is specific to that bond, such as the +current slaves of the bond, the link status of the slaves, and how +many times the slaves link has failed. + +1.5 SCSI info +------------- + +If you have a SCSI host adapter in your system, you'll find a subdirectory +named after the driver for this adapter in /proc/scsi. You'll also see a list +of all recognized SCSI devices in /proc/scsi:: + + >cat /proc/scsi/scsi + Attached devices: + Host: scsi0 Channel: 00 Id: 00 Lun: 00 + Vendor: IBM Model: DGHS09U Rev: 03E0 + Type: Direct-Access ANSI SCSI revision: 03 + Host: scsi0 Channel: 00 Id: 06 Lun: 00 + Vendor: PIONEER Model: CD-ROM DR-U06S Rev: 1.04 + Type: CD-ROM ANSI SCSI revision: 02 + + +The directory named after the driver has one file for each adapter found in +the system. These files contain information about the controller, including +the used IRQ and the IO address range. The amount of information shown is +dependent on the adapter you use. The example shows the output for an Adaptec +AHA-2940 SCSI adapter:: + + > cat /proc/scsi/aic7xxx/0 + + Adaptec AIC7xxx driver version: 5.1.19/3.2.4 + Compile Options: + TCQ Enabled By Default : Disabled + AIC7XXX_PROC_STATS : Disabled + AIC7XXX_RESET_DELAY : 5 + Adapter Configuration: + SCSI Adapter: Adaptec AHA-294X Ultra SCSI host adapter + Ultra Wide Controller + PCI MMAPed I/O Base: 0xeb001000 + Adapter SEEPROM Config: SEEPROM found and used. + Adaptec SCSI BIOS: Enabled + IRQ: 10 + SCBs: Active 0, Max Active 2, + Allocated 15, HW 16, Page 255 + Interrupts: 160328 + BIOS Control Word: 0x18b6 + Adapter Control Word: 0x005b + Extended Translation: Enabled + Disconnect Enable Flags: 0xffff + Ultra Enable Flags: 0x0001 + Tag Queue Enable Flags: 0x0000 + Ordered Queue Tag Flags: 0x0000 + Default Tag Queue Depth: 8 + Tagged Queue By Device array for aic7xxx host instance 0: + {255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255} + Actual queue depth per device for aic7xxx host instance 0: + {1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1} + Statistics: + (scsi0:0:0:0) + Device using Wide/Sync transfers at 40.0 MByte/sec, offset 8 + Transinfo settings: current(12/8/1/0), goal(12/8/1/0), user(12/15/1/0) + Total transfers 160151 (74577 reads and 85574 writes) + (scsi0:0:6:0) + Device using Narrow/Sync transfers at 5.0 MByte/sec, offset 15 + Transinfo settings: current(50/15/0/0), goal(50/15/0/0), user(50/15/0/0) + Total transfers 0 (0 reads and 0 writes) + + +1.6 Parallel port info in /proc/parport +--------------------------------------- + +The directory /proc/parport contains information about the parallel ports of +your system. It has one subdirectory for each port, named after the port +number (0,1,2,...). + +These directories contain the four files shown in Table 1-10. + + +.. table:: Table 1-10: Files in /proc/parport + + ========= ==================================================================== + File Content + ========= ==================================================================== + autoprobe Any IEEE-1284 device ID information that has been acquired. + devices list of the device drivers using that port. A + will appear by the + name of the device currently using the port (it might not appear + against any). + hardware Parallel port's base address, IRQ line and DMA channel. + irq IRQ that parport is using for that port. This is in a separate + file to allow you to alter it by writing a new value in (IRQ + number or none). + ========= ==================================================================== + +1.7 TTY info in /proc/tty +------------------------- + +Information about the available and actually used tty's can be found in the +directory /proc/tty. You'll find entries for drivers and line disciplines in +this directory, as shown in Table 1-11. + + +.. table:: Table 1-11: Files in /proc/tty + + ============= ============================================== + File Content + ============= ============================================== + drivers list of drivers and their usage + ldiscs registered line disciplines + driver/serial usage statistic and status of single tty lines + ============= ============================================== + +To see which tty's are currently in use, you can simply look into the file +/proc/tty/drivers:: + + > cat /proc/tty/drivers + pty_slave /dev/pts 136 0-255 pty:slave + pty_master /dev/ptm 128 0-255 pty:master + pty_slave /dev/ttyp 3 0-255 pty:slave + pty_master /dev/pty 2 0-255 pty:master + serial /dev/cua 5 64-67 serial:callout + serial /dev/ttyS 4 64-67 serial + /dev/tty0 /dev/tty0 4 0 system:vtmaster + /dev/ptmx /dev/ptmx 5 2 system + /dev/console /dev/console 5 1 system:console + /dev/tty /dev/tty 5 0 system:/dev/tty + unknown /dev/tty 4 1-63 console + + +1.8 Miscellaneous kernel statistics in /proc/stat +------------------------------------------------- + +Various pieces of information about kernel activity are available in the +/proc/stat file. All of the numbers reported in this file are aggregates +since the system first booted. For a quick look, simply cat the file:: + + > cat /proc/stat + cpu 2255 34 2290 22625563 6290 127 456 0 0 0 + cpu0 1132 34 1441 11311718 3675 127 438 0 0 0 + cpu1 1123 0 849 11313845 2614 0 18 0 0 0 + intr 114930548 113199788 3 0 5 263 0 4 [... lots more numbers ...] + ctxt 1990473 + btime 1062191376 + processes 2915 + procs_running 1 + procs_blocked 0 + softirq 183433 0 21755 12 39 1137 231 21459 2263 + +The very first "cpu" line aggregates the numbers in all of the other "cpuN" +lines. These numbers identify the amount of time the CPU has spent performing +different kinds of work. Time units are in USER_HZ (typically hundredths of a +second). The meanings of the columns are as follows, from left to right: + +- user: normal processes executing in user mode +- nice: niced processes executing in user mode +- system: processes executing in kernel mode +- idle: twiddling thumbs +- iowait: In a word, iowait stands for waiting for I/O to complete. But there + are several problems: + + 1. CPU will not wait for I/O to complete, iowait is the time that a task is + waiting for I/O to complete. When CPU goes into idle state for + outstanding task I/O, another task will be scheduled on this CPU. + 2. In a multi-core CPU, the task waiting for I/O to complete is not running + on any CPU, so the iowait of each CPU is difficult to calculate. + 3. The value of iowait field in /proc/stat will decrease in certain + conditions. + + So, the iowait is not reliable by reading from /proc/stat. +- irq: servicing interrupts +- softirq: servicing softirqs +- steal: involuntary wait +- guest: running a normal guest +- guest_nice: running a niced guest + +The "intr" line gives counts of interrupts serviced since boot time, for each +of the possible system interrupts. The first column is the total of all +interrupts serviced including unnumbered architecture specific interrupts; +each subsequent column is the total for that particular numbered interrupt. +Unnumbered interrupts are not shown, only summed into the total. + +The "ctxt" line gives the total number of context switches across all CPUs. + +The "btime" line gives the time at which the system booted, in seconds since +the Unix epoch. + +The "processes" line gives the number of processes and threads created, which +includes (but is not limited to) those created by calls to the fork() and +clone() system calls. + +The "procs_running" line gives the total number of threads that are +running or ready to run (i.e., the total number of runnable threads). + +The "procs_blocked" line gives the number of processes currently blocked, +waiting for I/O to complete. + +The "softirq" line gives counts of softirqs serviced since boot time, for each +of the possible system softirqs. The first column is the total of all +softirqs serviced; each subsequent column is the total for that particular +softirq. + + +1.9 Ext4 file system parameters +------------------------------- + +Information about mounted ext4 file systems can be found in +/proc/fs/ext4. Each mounted filesystem will have a directory in +/proc/fs/ext4 based on its device name (i.e., /proc/fs/ext4/hdc or +/proc/fs/ext4/dm-0). The files in each per-device directory are shown +in Table 1-12, below. + +.. table:: Table 1-12: Files in /proc/fs/ext4/<devname> + + ============== ========================================================== + File Content + mb_groups details of multiblock allocator buddy cache of free blocks + ============== ========================================================== + +1.10 /proc/consoles +------------------- +Shows registered system console lines. + +To see which character device lines are currently used for the system console +/dev/console, you may simply look into the file /proc/consoles:: + + > cat /proc/consoles + tty0 -WU (ECp) 4:7 + ttyS0 -W- (Ep) 4:64 + +The columns are: + ++--------------------+-------------------------------------------------------+ +| device | name of the device | ++====================+=======================================================+ +| operations | * R = can do read operations | +| | * W = can do write operations | +| | * U = can do unblank | ++--------------------+-------------------------------------------------------+ +| flags | * E = it is enabled | +| | * C = it is preferred console | +| | * B = it is primary boot console | +| | * p = it is used for printk buffer | +| | * b = it is not a TTY but a Braille device | +| | * a = it is safe to use when cpu is offline | ++--------------------+-------------------------------------------------------+ +| major:minor | major and minor number of the device separated by a | +| | colon | ++--------------------+-------------------------------------------------------+ + +Summary +------- + +The /proc file system serves information about the running system. It not only +allows access to process data but also allows you to request the kernel status +by reading files in the hierarchy. + +The directory structure of /proc reflects the types of information and makes +it easy, if not obvious, where to look for specific data. + +Chapter 2: Modifying System Parameters +====================================== + +In This Chapter +--------------- + +* Modifying kernel parameters by writing into files found in /proc/sys +* Exploring the files which modify certain parameters +* Review of the /proc/sys file tree + +------------------------------------------------------------------------------ + +A very interesting part of /proc is the directory /proc/sys. This is not only +a source of information, it also allows you to change parameters within the +kernel. Be very careful when attempting this. You can optimize your system, +but you can also cause it to crash. Never alter kernel parameters on a +production system. Set up a development machine and test to make sure that +everything works the way you want it to. You may have no alternative but to +reboot the machine once an error has been made. + +To change a value, simply echo the new value into the file. +You need to be root to do this. You can create your own boot script +to perform this every time your system boots. + +The files in /proc/sys can be used to fine tune and monitor miscellaneous and +general things in the operation of the Linux kernel. Since some of the files +can inadvertently disrupt your system, it is advisable to read both +documentation and source before actually making adjustments. In any case, be +very careful when writing to any of these files. The entries in /proc may +change slightly between the 2.1.* and the 2.2 kernel, so if there is any doubt +review the kernel documentation in the directory /usr/src/linux/Documentation. +This chapter is heavily based on the documentation included in the pre 2.2 +kernels, and became part of it in version 2.2.1 of the Linux kernel. + +Please see: Documentation/admin-guide/sysctl/ directory for descriptions of these +entries. + +Summary +------- + +Certain aspects of kernel behavior can be modified at runtime, without the +need to recompile the kernel, or even to reboot the system. The files in the +/proc/sys tree can not only be read, but also modified. You can use the echo +command to write value into these files, thereby changing the default settings +of the kernel. + + +Chapter 3: Per-process Parameters +================================= + +3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj- Adjust the oom-killer score +-------------------------------------------------------------------------------- + +These files can be used to adjust the badness heuristic used to select which +process gets killed in out of memory (oom) conditions. + +The badness heuristic assigns a value to each candidate task ranging from 0 +(never kill) to 1000 (always kill) to determine which process is targeted. The +units are roughly a proportion along that range of allowed memory the process +may allocate from based on an estimation of its current memory and swap use. +For example, if a task is using all allowed memory, its badness score will be +1000. If it is using half of its allowed memory, its score will be 500. + +The amount of "allowed" memory depends on the context in which the oom killer +was called. If it is due to the memory assigned to the allocating task's cpuset +being exhausted, the allowed memory represents the set of mems assigned to that +cpuset. If it is due to a mempolicy's node(s) being exhausted, the allowed +memory represents the set of mempolicy nodes. If it is due to a memory +limit (or swap limit) being reached, the allowed memory is that configured +limit. Finally, if it is due to the entire system being out of memory, the +allowed memory represents all allocatable resources. + +The value of /proc/<pid>/oom_score_adj is added to the badness score before it +is used to determine which task to kill. Acceptable values range from -1000 +(OOM_SCORE_ADJ_MIN) to +1000 (OOM_SCORE_ADJ_MAX). This allows userspace to +polarize the preference for oom killing either by always preferring a certain +task or completely disabling it. The lowest possible value, -1000, is +equivalent to disabling oom killing entirely for that task since it will always +report a badness score of 0. + +Consequently, it is very simple for userspace to define the amount of memory to +consider for each task. Setting a /proc/<pid>/oom_score_adj value of +500, for +example, is roughly equivalent to allowing the remainder of tasks sharing the +same system, cpuset, mempolicy, or memory controller resources to use at least +50% more memory. A value of -500, on the other hand, would be roughly +equivalent to discounting 50% of the task's allowed memory from being considered +as scoring against the task. + +For backwards compatibility with previous kernels, /proc/<pid>/oom_adj may also +be used to tune the badness score. Its acceptable values range from -16 +(OOM_ADJUST_MIN) to +15 (OOM_ADJUST_MAX) and a special value of -17 +(OOM_DISABLE) to disable oom killing entirely for that task. Its value is +scaled linearly with /proc/<pid>/oom_score_adj. + +The value of /proc/<pid>/oom_score_adj may be reduced no lower than the last +value set by a CAP_SYS_RESOURCE process. To reduce the value any lower +requires CAP_SYS_RESOURCE. + + +3.2 /proc/<pid>/oom_score - Display current oom-killer score +------------------------------------------------------------- + +This file can be used to check the current score used by the oom-killer for +any given <pid>. Use it together with /proc/<pid>/oom_score_adj to tune which +process should be killed in an out-of-memory situation. + +Please note that the exported value includes oom_score_adj so it is +effectively in range [0,2000]. + + +3.3 /proc/<pid>/io - Display the IO accounting fields +------------------------------------------------------- + +This file contains IO statistics for each running process. + +Example +~~~~~~~ + +:: + + test:/tmp # dd if=/dev/zero of=/tmp/test.dat & + [1] 3828 + + test:/tmp # cat /proc/3828/io + rchar: 323934931 + wchar: 323929600 + syscr: 632687 + syscw: 632675 + read_bytes: 0 + write_bytes: 323932160 + cancelled_write_bytes: 0 + + +Description +~~~~~~~~~~~ + +rchar +^^^^^ + +I/O counter: chars read +The number of bytes which this task has caused to be read from storage. This +is simply the sum of bytes which this process passed to read() and pread(). +It includes things like tty IO and it is unaffected by whether or not actual +physical disk IO was required (the read might have been satisfied from +pagecache). + + +wchar +^^^^^ + +I/O counter: chars written +The number of bytes which this task has caused, or shall cause to be written +to disk. Similar caveats apply here as with rchar. + + +syscr +^^^^^ + +I/O counter: read syscalls +Attempt to count the number of read I/O operations, i.e. syscalls like read() +and pread(). + + +syscw +^^^^^ + +I/O counter: write syscalls +Attempt to count the number of write I/O operations, i.e. syscalls like +write() and pwrite(). + + +read_bytes +^^^^^^^^^^ + +I/O counter: bytes read +Attempt to count the number of bytes which this process really did cause to +be fetched from the storage layer. Done at the submit_bio() level, so it is +accurate for block-backed filesystems. <please add status regarding NFS and +CIFS at a later time> + + +write_bytes +^^^^^^^^^^^ + +I/O counter: bytes written +Attempt to count the number of bytes which this process caused to be sent to +the storage layer. This is done at page-dirtying time. + + +cancelled_write_bytes +^^^^^^^^^^^^^^^^^^^^^ + +The big inaccuracy here is truncate. If a process writes 1MB to a file and +then deletes the file, it will in fact perform no writeout. But it will have +been accounted as having caused 1MB of write. +In other words: The number of bytes which this process caused to not happen, +by truncating pagecache. A task can cause "negative" IO too. If this task +truncates some dirty pagecache, some IO which another task has been accounted +for (in its write_bytes) will not be happening. We _could_ just subtract that +from the truncating task's write_bytes, but there is information loss in doing +that. + + +.. Note:: + + At its current implementation state, this is a bit racy on 32-bit machines: + if process A reads process B's /proc/pid/io while process B is updating one + of those 64-bit counters, process A could see an intermediate result. + + +More information about this can be found within the taskstats documentation in +Documentation/accounting. + +3.4 /proc/<pid>/coredump_filter - Core dump filtering settings +--------------------------------------------------------------- +When a process is dumped, all anonymous memory is written to a core file as +long as the size of the core file isn't limited. But sometimes we don't want +to dump some memory segments, for example, huge shared memory or DAX. +Conversely, sometimes we want to save file-backed memory segments into a core +file, not only the individual files. + +/proc/<pid>/coredump_filter allows you to customize which memory segments +will be dumped when the <pid> process is dumped. coredump_filter is a bitmask +of memory types. If a bit of the bitmask is set, memory segments of the +corresponding memory type are dumped, otherwise they are not dumped. + +The following 9 memory types are supported: + + - (bit 0) anonymous private memory + - (bit 1) anonymous shared memory + - (bit 2) file-backed private memory + - (bit 3) file-backed shared memory + - (bit 4) ELF header pages in file-backed private memory areas (it is + effective only if the bit 2 is cleared) + - (bit 5) hugetlb private memory + - (bit 6) hugetlb shared memory + - (bit 7) DAX private memory + - (bit 8) DAX shared memory + + Note that MMIO pages such as frame buffer are never dumped and vDSO pages + are always dumped regardless of the bitmask status. + + Note that bits 0-4 don't affect hugetlb or DAX memory. hugetlb memory is + only affected by bit 5-6, and DAX is only affected by bits 7-8. + +The default value of coredump_filter is 0x33; this means all anonymous memory +segments, ELF header pages and hugetlb private memory are dumped. + +If you don't want to dump all shared memory segments attached to pid 1234, +write 0x31 to the process's proc file:: + + $ echo 0x31 > /proc/1234/coredump_filter + +When a new process is created, the process inherits the bitmask status from its +parent. It is useful to set up coredump_filter before the program runs. +For example:: + + $ echo 0x7 > /proc/self/coredump_filter + $ ./some_program + +3.5 /proc/<pid>/mountinfo - Information about mounts +-------------------------------------------------------- + +This file contains lines of the form:: + + 36 35 98:0 /mnt1 /mnt2 rw,noatime master:1 - ext3 /dev/root rw,errors=continue + (1)(2)(3) (4) (5) (6) (7) (8) (9) (10) (11) + + (1) mount ID: unique identifier of the mount (may be reused after umount) + (2) parent ID: ID of parent (or of self for the top of the mount tree) + (3) major:minor: value of st_dev for files on filesystem + (4) root: root of the mount within the filesystem + (5) mount point: mount point relative to the process's root + (6) mount options: per mount options + (7) optional fields: zero or more fields of the form "tag[:value]" + (8) separator: marks the end of the optional fields + (9) filesystem type: name of filesystem of the form "type[.subtype]" + (10) mount source: filesystem specific information or "none" + (11) super options: per super block options + +Parsers should ignore all unrecognised optional fields. Currently the +possible optional fields are: + +================ ============================================================== +shared:X mount is shared in peer group X +master:X mount is slave to peer group X +propagate_from:X mount is slave and receives propagation from peer group X [#]_ +unbindable mount is unbindable +================ ============================================================== + +.. [#] X is the closest dominant peer group under the process's root. If + X is the immediate master of the mount, or if there's no dominant peer + group under the same root, then only the "master:X" field is present + and not the "propagate_from:X" field. + +For more information on mount propagation see: + + Documentation/filesystems/sharedsubtree.rst + + +3.6 /proc/<pid>/comm & /proc/<pid>/task/<tid>/comm +-------------------------------------------------------- +These files provide a method to access a task's comm value. It also allows for +a task to set its own or one of its thread siblings comm value. The comm value +is limited in size compared to the cmdline value, so writing anything longer +then the kernel's TASK_COMM_LEN (currently 16 chars) will result in a truncated +comm value. + + +3.7 /proc/<pid>/task/<tid>/children - Information about task children +------------------------------------------------------------------------- +This file provides a fast way to retrieve first level children pids +of a task pointed by <pid>/<tid> pair. The format is a space separated +stream of pids. + +Note the "first level" here -- if a child has its own children they will +not be listed here; one needs to read /proc/<children-pid>/task/<tid>/children +to obtain the descendants. + +Since this interface is intended to be fast and cheap it doesn't +guarantee to provide precise results and some children might be +skipped, especially if they've exited right after we printed their +pids, so one needs to either stop or freeze processes being inspected +if precise results are needed. + + +3.8 /proc/<pid>/fdinfo/<fd> - Information about opened file +--------------------------------------------------------------- +This file provides information associated with an opened file. The regular +files have at least three fields -- 'pos', 'flags' and 'mnt_id'. The 'pos' +represents the current offset of the opened file in decimal form [see lseek(2) +for details], 'flags' denotes the octal O_xxx mask the file has been +created with [see open(2) for details] and 'mnt_id' represents mount ID of +the file system containing the opened file [see 3.5 /proc/<pid>/mountinfo +for details]. + +A typical output is:: + + pos: 0 + flags: 0100002 + mnt_id: 19 + +All locks associated with a file descriptor are shown in its fdinfo too:: + + lock: 1: FLOCK ADVISORY WRITE 359 00:13:11691 0 EOF + +The files such as eventfd, fsnotify, signalfd, epoll among the regular pos/flags +pair provide additional information particular to the objects they represent. + +Eventfd files +~~~~~~~~~~~~~ + +:: + + pos: 0 + flags: 04002 + mnt_id: 9 + eventfd-count: 5a + +where 'eventfd-count' is hex value of a counter. + +Signalfd files +~~~~~~~~~~~~~~ + +:: + + pos: 0 + flags: 04002 + mnt_id: 9 + sigmask: 0000000000000200 + +where 'sigmask' is hex value of the signal mask associated +with a file. + +Epoll files +~~~~~~~~~~~ + +:: + + pos: 0 + flags: 02 + mnt_id: 9 + tfd: 5 events: 1d data: ffffffffffffffff pos:0 ino:61af sdev:7 + +where 'tfd' is a target file descriptor number in decimal form, +'events' is events mask being watched and the 'data' is data +associated with a target [see epoll(7) for more details]. + +The 'pos' is current offset of the target file in decimal form +[see lseek(2)], 'ino' and 'sdev' are inode and device numbers +where target file resides, all in hex format. + +Fsnotify files +~~~~~~~~~~~~~~ +For inotify files the format is the following:: + + pos: 0 + flags: 02000000 + inotify wd:3 ino:9e7e sdev:800013 mask:800afce ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:7e9e0000640d1b6d + +where 'wd' is a watch descriptor in decimal form, i.e. a target file +descriptor number, 'ino' and 'sdev' are inode and device where the +target file resides and the 'mask' is the mask of events, all in hex +form [see inotify(7) for more details]. + +If the kernel was built with exportfs support, the path to the target +file is encoded as a file handle. The file handle is provided by three +fields 'fhandle-bytes', 'fhandle-type' and 'f_handle', all in hex +format. + +If the kernel is built without exportfs support the file handle won't be +printed out. + +If there is no inotify mark attached yet the 'inotify' line will be omitted. + +For fanotify files the format is:: + + pos: 0 + flags: 02 + mnt_id: 9 + fanotify flags:10 event-flags:0 + fanotify mnt_id:12 mflags:40 mask:38 ignored_mask:40000003 + fanotify ino:4f969 sdev:800013 mflags:0 mask:3b ignored_mask:40000000 fhandle-bytes:8 fhandle-type:1 f_handle:69f90400c275b5b4 + +where fanotify 'flags' and 'event-flags' are values used in fanotify_init +call, 'mnt_id' is the mount point identifier, 'mflags' is the value of +flags associated with mark which are tracked separately from events +mask. 'ino' and 'sdev' are target inode and device, 'mask' is the events +mask and 'ignored_mask' is the mask of events which are to be ignored. +All are in hex format. Incorporation of 'mflags', 'mask' and 'ignored_mask' +provide information about flags and mask used in fanotify_mark +call [see fsnotify manpage for details]. + +While the first three lines are mandatory and always printed, the rest is +optional and may be omitted if no marks created yet. + +Timerfd files +~~~~~~~~~~~~~ + +:: + + pos: 0 + flags: 02 + mnt_id: 9 + clockid: 0 + ticks: 0 + settime flags: 01 + it_value: (0, 49406829) + it_interval: (1, 0) + +where 'clockid' is the clock type and 'ticks' is the number of the timer expirations +that have occurred [see timerfd_create(2) for details]. 'settime flags' are +flags in octal form been used to setup the timer [see timerfd_settime(2) for +details]. 'it_value' is remaining time until the timer expiration. +'it_interval' is the interval for the timer. Note the timer might be set up +with TIMER_ABSTIME option which will be shown in 'settime flags', but 'it_value' +still exhibits timer's remaining time. + +3.9 /proc/<pid>/map_files - Information about memory mapped files +--------------------------------------------------------------------- +This directory contains symbolic links which represent memory mapped files +the process is maintaining. Example output:: + + | lr-------- 1 root root 64 Jan 27 11:24 333c600000-333c620000 -> /usr/lib64/ld-2.18.so + | lr-------- 1 root root 64 Jan 27 11:24 333c81f000-333c820000 -> /usr/lib64/ld-2.18.so + | lr-------- 1 root root 64 Jan 27 11:24 333c820000-333c821000 -> /usr/lib64/ld-2.18.so + | ... + | lr-------- 1 root root 64 Jan 27 11:24 35d0421000-35d0422000 -> /usr/lib64/libselinux.so.1 + | lr-------- 1 root root 64 Jan 27 11:24 400000-41a000 -> /usr/bin/ls + +The name of a link represents the virtual memory bounds of a mapping, i.e. +vm_area_struct::vm_start-vm_area_struct::vm_end. + +The main purpose of the map_files is to retrieve a set of memory mapped +files in a fast way instead of parsing /proc/<pid>/maps or +/proc/<pid>/smaps, both of which contain many more records. At the same +time one can open(2) mappings from the listings of two processes and +comparing their inode numbers to figure out which anonymous memory areas +are actually shared. + +3.10 /proc/<pid>/timerslack_ns - Task timerslack value +--------------------------------------------------------- +This file provides the value of the task's timerslack value in nanoseconds. +This value specifies an amount of time that normal timers may be deferred +in order to coalesce timers and avoid unnecessary wakeups. + +This allows a task's interactivity vs power consumption tradeoff to be +adjusted. + +Writing 0 to the file will set the task's timerslack to the default value. + +Valid values are from 0 - ULLONG_MAX + +An application setting the value must have PTRACE_MODE_ATTACH_FSCREDS level +permissions on the task specified to change its timerslack_ns value. + +3.11 /proc/<pid>/patch_state - Livepatch patch operation state +----------------------------------------------------------------- +When CONFIG_LIVEPATCH is enabled, this file displays the value of the +patch state for the task. + +A value of '-1' indicates that no patch is in transition. + +A value of '0' indicates that a patch is in transition and the task is +unpatched. If the patch is being enabled, then the task hasn't been +patched yet. If the patch is being disabled, then the task has already +been unpatched. + +A value of '1' indicates that a patch is in transition and the task is +patched. If the patch is being enabled, then the task has already been +patched. If the patch is being disabled, then the task hasn't been +unpatched yet. + +3.12 /proc/<pid>/arch_status - task architecture specific status +------------------------------------------------------------------- +When CONFIG_PROC_PID_ARCH_STATUS is enabled, this file displays the +architecture specific status of the task. + +Example +~~~~~~~ + +:: + + $ cat /proc/6753/arch_status + AVX512_elapsed_ms: 8 + +Description +~~~~~~~~~~~ + +x86 specific entries +~~~~~~~~~~~~~~~~~~~~~ + +AVX512_elapsed_ms +^^^^^^^^^^^^^^^^^^ + + If AVX512 is supported on the machine, this entry shows the milliseconds + elapsed since the last time AVX512 usage was recorded. The recording + happens on a best effort basis when a task is scheduled out. This means + that the value depends on two factors: + + 1) The time which the task spent on the CPU without being scheduled + out. With CPU isolation and a single runnable task this can take + several seconds. + + 2) The time since the task was scheduled out last. Depending on the + reason for being scheduled out (time slice exhausted, syscall ...) + this can be arbitrary long time. + + As a consequence the value cannot be considered precise and authoritative + information. The application which uses this information has to be aware + of the overall scenario on the system in order to determine whether a + task is a real AVX512 user or not. Precise information can be obtained + with performance counters. + + A special value of '-1' indicates that no AVX512 usage was recorded, thus + the task is unlikely an AVX512 user, but depends on the workload and the + scheduling scenario, it also could be a false negative mentioned above. + +Chapter 4: Configuring procfs +============================= + +4.1 Mount options +--------------------- + +The following mount options are supported: + + ========= ======================================================== + hidepid= Set /proc/<pid>/ access mode. + gid= Set the group authorized to learn processes information. + subset= Show only the specified subset of procfs. + ========= ======================================================== + +hidepid=off or hidepid=0 means classic mode - everybody may access all +/proc/<pid>/ directories (default). + +hidepid=noaccess or hidepid=1 means users may not access any /proc/<pid>/ +directories but their own. Sensitive files like cmdline, sched*, status are now +protected against other users. This makes it impossible to learn whether any +user runs specific program (given the program doesn't reveal itself by its +behaviour). As an additional bonus, as /proc/<pid>/cmdline is unaccessible for +other users, poorly written programs passing sensitive information via program +arguments are now protected against local eavesdroppers. + +hidepid=invisible or hidepid=2 means hidepid=1 plus all /proc/<pid>/ will be +fully invisible to other users. It doesn't mean that it hides a fact whether a +process with a specific pid value exists (it can be learned by other means, e.g. +by "kill -0 $PID"), but it hides process' uid and gid, which may be learned by +stat()'ing /proc/<pid>/ otherwise. It greatly complicates an intruder's task of +gathering information about running processes, whether some daemon runs with +elevated privileges, whether other user runs some sensitive program, whether +other users run any program at all, etc. + +hidepid=ptraceable or hidepid=4 means that procfs should only contain +/proc/<pid>/ directories that the caller can ptrace. + +gid= defines a group authorized to learn processes information otherwise +prohibited by hidepid=. If you use some daemon like identd which needs to learn +information about processes information, just add identd to this group. + +subset=pid hides all top level files and directories in the procfs that +are not related to tasks. + +Chapter 5: Filesystem behavior +============================== + +Originally, before the advent of pid namepsace, procfs was a global file +system. It means that there was only one procfs instance in the system. + +When pid namespace was added, a separate procfs instance was mounted in +each pid namespace. So, procfs mount options are global among all +mountpoints within the same namespace:: + + # grep ^proc /proc/mounts + proc /proc proc rw,relatime,hidepid=2 0 0 + + # strace -e mount mount -o hidepid=1 -t proc proc /tmp/proc + mount("proc", "/tmp/proc", "proc", 0, "hidepid=1") = 0 + +++ exited with 0 +++ + + # grep ^proc /proc/mounts + proc /proc proc rw,relatime,hidepid=2 0 0 + proc /tmp/proc proc rw,relatime,hidepid=2 0 0 + +and only after remounting procfs mount options will change at all +mountpoints:: + + # mount -o remount,hidepid=1 -t proc proc /tmp/proc + + # grep ^proc /proc/mounts + proc /proc proc rw,relatime,hidepid=1 0 0 + proc /tmp/proc proc rw,relatime,hidepid=1 0 0 + +This behavior is different from the behavior of other filesystems. + +The new procfs behavior is more like other filesystems. Each procfs mount +creates a new procfs instance. Mount options affect own procfs instance. +It means that it became possible to have several procfs instances +displaying tasks with different filtering options in one pid namespace:: + + # mount -o hidepid=invisible -t proc proc /proc + # mount -o hidepid=noaccess -t proc proc /tmp/proc + # grep ^proc /proc/mounts + proc /proc proc rw,relatime,hidepid=invisible 0 0 + proc /tmp/proc proc rw,relatime,hidepid=noaccess 0 0 diff --git a/Documentation/filesystems/qnx6.rst b/Documentation/filesystems/qnx6.rst new file mode 100644 index 000000000..fd13433d3 --- /dev/null +++ b/Documentation/filesystems/qnx6.rst @@ -0,0 +1,196 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================== +The QNX6 Filesystem +=================== + +The qnx6fs is used by newer QNX operating system versions. (e.g. Neutrino) +It got introduced in QNX 6.4.0 and is used default since 6.4.1. + +Option +====== + +mmi_fs Mount filesystem as used for example by Audi MMI 3G system + +Specification +============= + +qnx6fs shares many properties with traditional Unix filesystems. It has the +concepts of blocks, inodes and directories. + +On QNX it is possible to create little endian and big endian qnx6 filesystems. +This feature makes it possible to create and use a different endianness fs +for the target (QNX is used on quite a range of embedded systems) platform +running on a different endianness. + +The Linux driver handles endianness transparently. (LE and BE) + +Blocks +------ + +The space in the device or file is split up into blocks. These are a fixed +size of 512, 1024, 2048 or 4096, which is decided when the filesystem is +created. + +Blockpointers are 32bit, so the maximum space that can be addressed is +2^32 * 4096 bytes or 16TB + +The superblocks +--------------- + +The superblock contains all global information about the filesystem. +Each qnx6fs got two superblocks, each one having a 64bit serial number. +That serial number is used to identify the "active" superblock. +In write mode with reach new snapshot (after each synchronous write), the +serial of the new master superblock is increased (old superblock serial + 1) + +So basically the snapshot functionality is realized by an atomic final +update of the serial number. Before updating that serial, all modifications +are done by copying all modified blocks during that specific write request +(or period) and building up a new (stable) filesystem structure under the +inactive superblock. + +Each superblock holds a set of root inodes for the different filesystem +parts. (Inode, Bitmap and Longfilenames) +Each of these root nodes holds information like total size of the stored +data and the addressing levels in that specific tree. +If the level value is 0, up to 16 direct blocks can be addressed by each +node. + +Level 1 adds an additional indirect addressing level where each indirect +addressing block holds up to blocksize / 4 bytes pointers to data blocks. +Level 2 adds an additional indirect addressing block level (so, already up +to 16 * 256 * 256 = 1048576 blocks that can be addressed by such a tree). + +Unused block pointers are always set to ~0 - regardless of root node, +indirect addressing blocks or inodes. + +Data leaves are always on the lowest level. So no data is stored on upper +tree levels. + +The first Superblock is located at 0x2000. (0x2000 is the bootblock size) +The Audi MMI 3G first superblock directly starts at byte 0. + +Second superblock position can either be calculated from the superblock +information (total number of filesystem blocks) or by taking the highest +device address, zeroing the last 3 bytes and then subtracting 0x1000 from +that address. + +0x1000 is the size reserved for each superblock - regardless of the +blocksize of the filesystem. + +Inodes +------ + +Each object in the filesystem is represented by an inode. (index node) +The inode structure contains pointers to the filesystem blocks which contain +the data held in the object and all of the metadata about an object except +its longname. (filenames longer than 27 characters) +The metadata about an object includes the permissions, owner, group, flags, +size, number of blocks used, access time, change time and modification time. + +Object mode field is POSIX format. (which makes things easier) + +There are also pointers to the first 16 blocks, if the object data can be +addressed with 16 direct blocks. + +For more than 16 blocks an indirect addressing in form of another tree is +used. (scheme is the same as the one used for the superblock root nodes) + +The filesize is stored 64bit. Inode counting starts with 1. (while long +filename inodes start with 0) + +Directories +----------- + +A directory is a filesystem object and has an inode just like a file. +It is a specially formatted file containing records which associate each +name with an inode number. + +'.' inode number points to the directory inode + +'..' inode number points to the parent directory inode + +Eeach filename record additionally got a filename length field. + +One special case are long filenames or subdirectory names. + +These got set a filename length field of 0xff in the corresponding directory +record plus the longfile inode number also stored in that record. + +With that longfilename inode number, the longfilename tree can be walked +starting with the superblock longfilename root node pointers. + +Special files +------------- + +Symbolic links are also filesystem objects with inodes. They got a specific +bit in the inode mode field identifying them as symbolic link. + +The directory entry file inode pointer points to the target file inode. + +Hard links got an inode, a directory entry, but a specific mode bit set, +no block pointers and the directory file record pointing to the target file +inode. + +Character and block special devices do not exist in QNX as those files +are handled by the QNX kernel/drivers and created in /dev independent of the +underlaying filesystem. + +Long filenames +-------------- + +Long filenames are stored in a separate addressing tree. The staring point +is the longfilename root node in the active superblock. + +Each data block (tree leaves) holds one long filename. That filename is +limited to 510 bytes. The first two starting bytes are used as length field +for the actual filename. + +If that structure shall fit for all allowed blocksizes, it is clear why there +is a limit of 510 bytes for the actual filename stored. + +Bitmap +------ + +The qnx6fs filesystem allocation bitmap is stored in a tree under bitmap +root node in the superblock and each bit in the bitmap represents one +filesystem block. + +The first block is block 0, which starts 0x1000 after superblock start. +So for a normal qnx6fs 0x3000 (bootblock + superblock) is the physical +address at which block 0 is located. + +Bits at the end of the last bitmap block are set to 1, if the device is +smaller than addressing space in the bitmap. + +Bitmap system area +------------------ + +The bitmap itself is divided into three parts. + +First the system area, that is split into two halves. + +Then userspace. + +The requirement for a static, fixed preallocated system area comes from how +qnx6fs deals with writes. + +Each superblock got it's own half of the system area. So superblock #1 +always uses blocks from the lower half while superblock #2 just writes to +blocks represented by the upper half bitmap system area bits. + +Bitmap blocks, Inode blocks and indirect addressing blocks for those two +tree structures are treated as system blocks. + +The rational behind that is that a write request can work on a new snapshot +(system area of the inactive - resp. lower serial numbered superblock) while +at the same time there is still a complete stable filesystem structure in the +other half of the system area. + +When finished with writing (a sync write is completed, the maximum sync leap +time or a filesystem sync is requested), serial of the previously inactive +superblock atomically is increased and the fs switches over to that - then +stable declared - superblock. + +For all data outside the system area, blocks are just copied while writing. diff --git a/Documentation/filesystems/quota.rst b/Documentation/filesystems/quota.rst new file mode 100644 index 000000000..abd4303c5 --- /dev/null +++ b/Documentation/filesystems/quota.rst @@ -0,0 +1,85 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============== +Quota subsystem +=============== + +Quota subsystem allows system administrator to set limits on used space and +number of used inodes (inode is a filesystem structure which is associated with +each file or directory) for users and/or groups. For both used space and number +of used inodes there are actually two limits. The first one is called softlimit +and the second one hardlimit. A user can never exceed a hardlimit for any +resource (unless he has CAP_SYS_RESOURCE capability). User is allowed to exceed +softlimit but only for limited period of time. This period is called "grace +period" or "grace time". When grace time is over, user is not able to allocate +more space/inodes until he frees enough of them to get below softlimit. + +Quota limits (and amount of grace time) are set independently for each +filesystem. + +For more details about quota design, see the documentation in quota-tools package +(https://sourceforge.net/projects/linuxquota). + +Quota netlink interface +======================= +When user exceeds a softlimit, runs out of grace time or reaches hardlimit, +quota subsystem traditionally printed a message to the controlling terminal of +the process which caused the excess. This method has the disadvantage that +when user is using a graphical desktop he usually cannot see the message. +Thus quota netlink interface has been designed to pass information about +the above events to userspace. There they can be captured by an application +and processed accordingly. + +The interface uses generic netlink framework (see +https://lwn.net/Articles/208755/ and http://www.infradead.org/~tgr/libnl/ for +more details about this layer). The name of the quota generic netlink interface +is "VFS_DQUOT". Definitions of constants below are in <linux/quota.h>. Since +the quota netlink protocol is not namespace aware, quota netlink messages are +sent only in initial network namespace. + +Currently, the interface supports only one message type QUOTA_NL_C_WARNING. +This command is used to send a notification about any of the above mentioned +events. Each message has six attributes. These are (type of the argument is +in parentheses): + + QUOTA_NL_A_QTYPE (u32) + - type of quota being exceeded (one of USRQUOTA, GRPQUOTA) + QUOTA_NL_A_EXCESS_ID (u64) + - UID/GID (depends on quota type) of user / group whose limit + is being exceeded. + QUOTA_NL_A_CAUSED_ID (u64) + - UID of a user who caused the event + QUOTA_NL_A_WARNING (u32) + - what kind of limit is exceeded: + + QUOTA_NL_IHARDWARN + inode hardlimit + QUOTA_NL_ISOFTLONGWARN + inode softlimit is exceeded longer + than given grace period + QUOTA_NL_ISOFTWARN + inode softlimit + QUOTA_NL_BHARDWARN + space (block) hardlimit + QUOTA_NL_BSOFTLONGWARN + space (block) softlimit is exceeded + longer than given grace period. + QUOTA_NL_BSOFTWARN + space (block) softlimit + + - four warnings are also defined for the event when user stops + exceeding some limit: + + QUOTA_NL_IHARDBELOW + inode hardlimit + QUOTA_NL_ISOFTBELOW + inode softlimit + QUOTA_NL_BHARDBELOW + space (block) hardlimit + QUOTA_NL_BSOFTBELOW + space (block) softlimit + + QUOTA_NL_A_DEV_MAJOR (u32) + - major number of a device with the affected filesystem + QUOTA_NL_A_DEV_MINOR (u32) + - minor number of a device with the affected filesystem diff --git a/Documentation/filesystems/ramfs-rootfs-initramfs.rst b/Documentation/filesystems/ramfs-rootfs-initramfs.rst new file mode 100644 index 000000000..164960631 --- /dev/null +++ b/Documentation/filesystems/ramfs-rootfs-initramfs.rst @@ -0,0 +1,369 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=========================== +Ramfs, rootfs and initramfs +=========================== + +October 17, 2005 + +Rob Landley <rob@landley.net> +============================= + +What is ramfs? +-------------- + +Ramfs is a very simple filesystem that exports Linux's disk caching +mechanisms (the page cache and dentry cache) as a dynamically resizable +RAM-based filesystem. + +Normally all files are cached in memory by Linux. Pages of data read from +backing store (usually the block device the filesystem is mounted on) are kept +around in case it's needed again, but marked as clean (freeable) in case the +Virtual Memory system needs the memory for something else. Similarly, data +written to files is marked clean as soon as it has been written to backing +store, but kept around for caching purposes until the VM reallocates the +memory. A similar mechanism (the dentry cache) greatly speeds up access to +directories. + +With ramfs, there is no backing store. Files written into ramfs allocate +dentries and page cache as usual, but there's nowhere to write them to. +This means the pages are never marked clean, so they can't be freed by the +VM when it's looking to recycle memory. + +The amount of code required to implement ramfs is tiny, because all the +work is done by the existing Linux caching infrastructure. Basically, +you're mounting the disk cache as a filesystem. Because of this, ramfs is not +an optional component removable via menuconfig, since there would be negligible +space savings. + +ramfs and ramdisk: +------------------ + +The older "ram disk" mechanism created a synthetic block device out of +an area of RAM and used it as backing store for a filesystem. This block +device was of fixed size, so the filesystem mounted on it was of fixed +size. Using a ram disk also required unnecessarily copying memory from the +fake block device into the page cache (and copying changes back out), as well +as creating and destroying dentries. Plus it needed a filesystem driver +(such as ext2) to format and interpret this data. + +Compared to ramfs, this wastes memory (and memory bus bandwidth), creates +unnecessary work for the CPU, and pollutes the CPU caches. (There are tricks +to avoid this copying by playing with the page tables, but they're unpleasantly +complicated and turn out to be about as expensive as the copying anyway.) +More to the point, all the work ramfs is doing has to happen _anyway_, +since all file access goes through the page and dentry caches. The RAM +disk is simply unnecessary; ramfs is internally much simpler. + +Another reason ramdisks are semi-obsolete is that the introduction of +loopback devices offered a more flexible and convenient way to create +synthetic block devices, now from files instead of from chunks of memory. +See losetup (8) for details. + +ramfs and tmpfs: +---------------- + +One downside of ramfs is you can keep writing data into it until you fill +up all memory, and the VM can't free it because the VM thinks that files +should get written to backing store (rather than swap space), but ramfs hasn't +got any backing store. Because of this, only root (or a trusted user) should +be allowed write access to a ramfs mount. + +A ramfs derivative called tmpfs was created to add size limits, and the ability +to write the data to swap space. Normal users can be allowed write access to +tmpfs mounts. See Documentation/filesystems/tmpfs.rst for more information. + +What is rootfs? +--------------- + +Rootfs is a special instance of ramfs (or tmpfs, if that's enabled), which is +always present in 2.6 systems. You can't unmount rootfs for approximately the +same reason you can't kill the init process; rather than having special code +to check for and handle an empty list, it's smaller and simpler for the kernel +to just make sure certain lists can't become empty. + +Most systems just mount another filesystem over rootfs and ignore it. The +amount of space an empty instance of ramfs takes up is tiny. + +If CONFIG_TMPFS is enabled, rootfs will use tmpfs instead of ramfs by +default. To force ramfs, add "rootfstype=ramfs" to the kernel command +line. + +What is initramfs? +------------------ + +All 2.6 Linux kernels contain a gzipped "cpio" format archive, which is +extracted into rootfs when the kernel boots up. After extracting, the kernel +checks to see if rootfs contains a file "init", and if so it executes it as PID +1. If found, this init process is responsible for bringing the system the +rest of the way up, including locating and mounting the real root device (if +any). If rootfs does not contain an init program after the embedded cpio +archive is extracted into it, the kernel will fall through to the older code +to locate and mount a root partition, then exec some variant of /sbin/init +out of that. + +All this differs from the old initrd in several ways: + + - The old initrd was always a separate file, while the initramfs archive is + linked into the linux kernel image. (The directory ``linux-*/usr`` is + devoted to generating this archive during the build.) + + - The old initrd file was a gzipped filesystem image (in some file format, + such as ext2, that needed a driver built into the kernel), while the new + initramfs archive is a gzipped cpio archive (like tar only simpler, + see cpio(1) and Documentation/driver-api/early-userspace/buffer-format.rst). + The kernel's cpio extraction code is not only extremely small, it's also + __init text and data that can be discarded during the boot process. + + - The program run by the old initrd (which was called /initrd, not /init) did + some setup and then returned to the kernel, while the init program from + initramfs is not expected to return to the kernel. (If /init needs to hand + off control it can overmount / with a new root device and exec another init + program. See the switch_root utility, below.) + + - When switching another root device, initrd would pivot_root and then + umount the ramdisk. But initramfs is rootfs: you can neither pivot_root + rootfs, nor unmount it. Instead delete everything out of rootfs to + free up the space (find -xdev / -exec rm '{}' ';'), overmount rootfs + with the new root (cd /newmount; mount --move . /; chroot .), attach + stdin/stdout/stderr to the new /dev/console, and exec the new init. + + Since this is a remarkably persnickety process (and involves deleting + commands before you can run them), the klibc package introduced a helper + program (utils/run_init.c) to do all this for you. Most other packages + (such as busybox) have named this command "switch_root". + +Populating initramfs: +--------------------- + +The 2.6 kernel build process always creates a gzipped cpio format initramfs +archive and links it into the resulting kernel binary. By default, this +archive is empty (consuming 134 bytes on x86). + +The config option CONFIG_INITRAMFS_SOURCE (in General Setup in menuconfig, +and living in usr/Kconfig) can be used to specify a source for the +initramfs archive, which will automatically be incorporated into the +resulting binary. This option can point to an existing gzipped cpio +archive, a directory containing files to be archived, or a text file +specification such as the following example:: + + dir /dev 755 0 0 + nod /dev/console 644 0 0 c 5 1 + nod /dev/loop0 644 0 0 b 7 0 + dir /bin 755 1000 1000 + slink /bin/sh busybox 777 0 0 + file /bin/busybox initramfs/busybox 755 0 0 + dir /proc 755 0 0 + dir /sys 755 0 0 + dir /mnt 755 0 0 + file /init initramfs/init.sh 755 0 0 + +Run "usr/gen_init_cpio" (after the kernel build) to get a usage message +documenting the above file format. + +One advantage of the configuration file is that root access is not required to +set permissions or create device nodes in the new archive. (Note that those +two example "file" entries expect to find files named "init.sh" and "busybox" in +a directory called "initramfs", under the linux-2.6.* directory. See +Documentation/driver-api/early-userspace/early_userspace_support.rst for more details.) + +The kernel does not depend on external cpio tools. If you specify a +directory instead of a configuration file, the kernel's build infrastructure +creates a configuration file from that directory (usr/Makefile calls +usr/gen_initramfs.sh), and proceeds to package up that directory +using the config file (by feeding it to usr/gen_init_cpio, which is created +from usr/gen_init_cpio.c). The kernel's build-time cpio creation code is +entirely self-contained, and the kernel's boot-time extractor is also +(obviously) self-contained. + +The one thing you might need external cpio utilities installed for is creating +or extracting your own preprepared cpio files to feed to the kernel build +(instead of a config file or directory). + +The following command line can extract a cpio image (either by the above script +or by the kernel build) back into its component files:: + + cpio -i -d -H newc -F initramfs_data.cpio --no-absolute-filenames + +The following shell script can create a prebuilt cpio archive you can +use in place of the above config file:: + + #!/bin/sh + + # Copyright 2006 Rob Landley <rob@landley.net> and TimeSys Corporation. + # Licensed under GPL version 2 + + if [ $# -ne 2 ] + then + echo "usage: mkinitramfs directory imagename.cpio.gz" + exit 1 + fi + + if [ -d "$1" ] + then + echo "creating $2 from $1" + (cd "$1"; find . | cpio -o -H newc | gzip) > "$2" + else + echo "First argument must be a directory" + exit 1 + fi + +.. Note:: + + The cpio man page contains some bad advice that will break your initramfs + archive if you follow it. It says "A typical way to generate the list + of filenames is with the find command; you should give find the -depth + option to minimize problems with permissions on directories that are + unwritable or not searchable." Don't do this when creating + initramfs.cpio.gz images, it won't work. The Linux kernel cpio extractor + won't create files in a directory that doesn't exist, so the directory + entries must go before the files that go in those directories. + The above script gets them in the right order. + +External initramfs images: +-------------------------- + +If the kernel has initrd support enabled, an external cpio.gz archive can also +be passed into a 2.6 kernel in place of an initrd. In this case, the kernel +will autodetect the type (initramfs, not initrd) and extract the external cpio +archive into rootfs before trying to run /init. + +This has the memory efficiency advantages of initramfs (no ramdisk block +device) but the separate packaging of initrd (which is nice if you have +non-GPL code you'd like to run from initramfs, without conflating it with +the GPL licensed Linux kernel binary). + +It can also be used to supplement the kernel's built-in initramfs image. The +files in the external archive will overwrite any conflicting files in +the built-in initramfs archive. Some distributors also prefer to customize +a single kernel image with task-specific initramfs images, without recompiling. + +Contents of initramfs: +---------------------- + +An initramfs archive is a complete self-contained root filesystem for Linux. +If you don't already understand what shared libraries, devices, and paths +you need to get a minimal root filesystem up and running, here are some +references: + +- https://www.tldp.org/HOWTO/Bootdisk-HOWTO/ +- https://www.tldp.org/HOWTO/From-PowerUp-To-Bash-Prompt-HOWTO.html +- http://www.linuxfromscratch.org/lfs/view/stable/ + +The "klibc" package (https://www.kernel.org/pub/linux/libs/klibc) is +designed to be a tiny C library to statically link early userspace +code against, along with some related utilities. It is BSD licensed. + +I use uClibc (https://www.uclibc.org) and busybox (https://www.busybox.net) +myself. These are LGPL and GPL, respectively. (A self-contained initramfs +package is planned for the busybox 1.3 release.) + +In theory you could use glibc, but that's not well suited for small embedded +uses like this. (A "hello world" program statically linked against glibc is +over 400k. With uClibc it's 7k. Also note that glibc dlopens libnss to do +name lookups, even when otherwise statically linked.) + +A good first step is to get initramfs to run a statically linked "hello world" +program as init, and test it under an emulator like qemu (www.qemu.org) or +User Mode Linux, like so:: + + cat > hello.c << EOF + #include <stdio.h> + #include <unistd.h> + + int main(int argc, char *argv[]) + { + printf("Hello world!\n"); + sleep(999999999); + } + EOF + gcc -static hello.c -o init + echo init | cpio -o -H newc | gzip > test.cpio.gz + # Testing external initramfs using the initrd loading mechanism. + qemu -kernel /boot/vmlinuz -initrd test.cpio.gz /dev/zero + +When debugging a normal root filesystem, it's nice to be able to boot with +"init=/bin/sh". The initramfs equivalent is "rdinit=/bin/sh", and it's +just as useful. + +Why cpio rather than tar? +------------------------- + +This decision was made back in December, 2001. The discussion started here: + + http://www.uwsg.iu.edu/hypermail/linux/kernel/0112.2/1538.html + +And spawned a second thread (specifically on tar vs cpio), starting here: + + http://www.uwsg.iu.edu/hypermail/linux/kernel/0112.2/1587.html + +The quick and dirty summary version (which is no substitute for reading +the above threads) is: + +1) cpio is a standard. It's decades old (from the AT&T days), and already + widely used on Linux (inside RPM, Red Hat's device driver disks). Here's + a Linux Journal article about it from 1996: + + http://www.linuxjournal.com/article/1213 + + It's not as popular as tar because the traditional cpio command line tools + require _truly_hideous_ command line arguments. But that says nothing + either way about the archive format, and there are alternative tools, + such as: + + http://freecode.com/projects/afio + +2) The cpio archive format chosen by the kernel is simpler and cleaner (and + thus easier to create and parse) than any of the (literally dozens of) + various tar archive formats. The complete initramfs archive format is + explained in buffer-format.txt, created in usr/gen_init_cpio.c, and + extracted in init/initramfs.c. All three together come to less than 26k + total of human-readable text. + +3) The GNU project standardizing on tar is approximately as relevant as + Windows standardizing on zip. Linux is not part of either, and is free + to make its own technical decisions. + +4) Since this is a kernel internal format, it could easily have been + something brand new. The kernel provides its own tools to create and + extract this format anyway. Using an existing standard was preferable, + but not essential. + +5) Al Viro made the decision (quote: "tar is ugly as hell and not going to be + supported on the kernel side"): + + http://www.uwsg.iu.edu/hypermail/linux/kernel/0112.2/1540.html + + explained his reasoning: + + - http://www.uwsg.iu.edu/hypermail/linux/kernel/0112.2/1550.html + - http://www.uwsg.iu.edu/hypermail/linux/kernel/0112.2/1638.html + + and, most importantly, designed and implemented the initramfs code. + +Future directions: +------------------ + +Today (2.6.16), initramfs is always compiled in, but not always used. The +kernel falls back to legacy boot code that is reached only if initramfs does +not contain an /init program. The fallback is legacy code, there to ensure a +smooth transition and allowing early boot functionality to gradually move to +"early userspace" (I.E. initramfs). + +The move to early userspace is necessary because finding and mounting the real +root device is complex. Root partitions can span multiple devices (raid or +separate journal). They can be out on the network (requiring dhcp, setting a +specific MAC address, logging into a server, etc). They can live on removable +media, with dynamically allocated major/minor numbers and persistent naming +issues requiring a full udev implementation to sort out. They can be +compressed, encrypted, copy-on-write, loopback mounted, strangely partitioned, +and so on. + +This kind of complexity (which inevitably includes policy) is rightly handled +in userspace. Both klibc and busybox/uClibc are working on simple initramfs +packages to drop into a kernel build. + +The klibc package has now been accepted into Andrew Morton's 2.6.17-mm tree. +The kernel's current early boot code (partition detection, etc) will probably +be migrated into a default initramfs, automatically created and used by the +kernel build. diff --git a/Documentation/filesystems/relay.rst b/Documentation/filesystems/relay.rst new file mode 100644 index 000000000..04ad083cf --- /dev/null +++ b/Documentation/filesystems/relay.rst @@ -0,0 +1,501 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================================== +relay interface (formerly relayfs) +================================== + +The relay interface provides a means for kernel applications to +efficiently log and transfer large quantities of data from the kernel +to userspace via user-defined 'relay channels'. + +A 'relay channel' is a kernel->user data relay mechanism implemented +as a set of per-cpu kernel buffers ('channel buffers'), each +represented as a regular file ('relay file') in user space. Kernel +clients write into the channel buffers using efficient write +functions; these automatically log into the current cpu's channel +buffer. User space applications mmap() or read() from the relay files +and retrieve the data as it becomes available. The relay files +themselves are files created in a host filesystem, e.g. debugfs, and +are associated with the channel buffers using the API described below. + +The format of the data logged into the channel buffers is completely +up to the kernel client; the relay interface does however provide +hooks which allow kernel clients to impose some structure on the +buffer data. The relay interface doesn't implement any form of data +filtering - this also is left to the kernel client. The purpose is to +keep things as simple as possible. + +This document provides an overview of the relay interface API. The +details of the function parameters are documented along with the +functions in the relay interface code - please see that for details. + +Semantics +========= + +Each relay channel has one buffer per CPU, each buffer has one or more +sub-buffers. Messages are written to the first sub-buffer until it is +too full to contain a new message, in which case it is written to +the next (if available). Messages are never split across sub-buffers. +At this point, userspace can be notified so it empties the first +sub-buffer, while the kernel continues writing to the next. + +When notified that a sub-buffer is full, the kernel knows how many +bytes of it are padding i.e. unused space occurring because a complete +message couldn't fit into a sub-buffer. Userspace can use this +knowledge to copy only valid data. + +After copying it, userspace can notify the kernel that a sub-buffer +has been consumed. + +A relay channel can operate in a mode where it will overwrite data not +yet collected by userspace, and not wait for it to be consumed. + +The relay channel itself does not provide for communication of such +data between userspace and kernel, allowing the kernel side to remain +simple and not impose a single interface on userspace. It does +provide a set of examples and a separate helper though, described +below. + +The read() interface both removes padding and internally consumes the +read sub-buffers; thus in cases where read(2) is being used to drain +the channel buffers, special-purpose communication between kernel and +user isn't necessary for basic operation. + +One of the major goals of the relay interface is to provide a low +overhead mechanism for conveying kernel data to userspace. While the +read() interface is easy to use, it's not as efficient as the mmap() +approach; the example code attempts to make the tradeoff between the +two approaches as small as possible. + +klog and relay-apps example code +================================ + +The relay interface itself is ready to use, but to make things easier, +a couple simple utility functions and a set of examples are provided. + +The relay-apps example tarball, available on the relay sourceforge +site, contains a set of self-contained examples, each consisting of a +pair of .c files containing boilerplate code for each of the user and +kernel sides of a relay application. When combined these two sets of +boilerplate code provide glue to easily stream data to disk, without +having to bother with mundane housekeeping chores. + +The 'klog debugging functions' patch (klog.patch in the relay-apps +tarball) provides a couple of high-level logging functions to the +kernel which allow writing formatted text or raw data to a channel, +regardless of whether a channel to write into exists or not, or even +whether the relay interface is compiled into the kernel or not. These +functions allow you to put unconditional 'trace' statements anywhere +in the kernel or kernel modules; only when there is a 'klog handler' +registered will data actually be logged (see the klog and kleak +examples for details). + +It is of course possible to use the relay interface from scratch, +i.e. without using any of the relay-apps example code or klog, but +you'll have to implement communication between userspace and kernel, +allowing both to convey the state of buffers (full, empty, amount of +padding). The read() interface both removes padding and internally +consumes the read sub-buffers; thus in cases where read(2) is being +used to drain the channel buffers, special-purpose communication +between kernel and user isn't necessary for basic operation. Things +such as buffer-full conditions would still need to be communicated via +some channel though. + +klog and the relay-apps examples can be found in the relay-apps +tarball on http://relayfs.sourceforge.net + +The relay interface user space API +================================== + +The relay interface implements basic file operations for user space +access to relay channel buffer data. Here are the file operations +that are available and some comments regarding their behavior: + +=========== ============================================================ +open() enables user to open an _existing_ channel buffer. + +mmap() results in channel buffer being mapped into the caller's + memory space. Note that you can't do a partial mmap - you + must map the entire file, which is NRBUF * SUBBUFSIZE. + +read() read the contents of a channel buffer. The bytes read are + 'consumed' by the reader, i.e. they won't be available + again to subsequent reads. If the channel is being used + in no-overwrite mode (the default), it can be read at any + time even if there's an active kernel writer. If the + channel is being used in overwrite mode and there are + active channel writers, results may be unpredictable - + users should make sure that all logging to the channel has + ended before using read() with overwrite mode. Sub-buffer + padding is automatically removed and will not be seen by + the reader. + +sendfile() transfer data from a channel buffer to an output file + descriptor. Sub-buffer padding is automatically removed + and will not be seen by the reader. + +poll() POLLIN/POLLRDNORM/POLLERR supported. User applications are + notified when sub-buffer boundaries are crossed. + +close() decrements the channel buffer's refcount. When the refcount + reaches 0, i.e. when no process or kernel client has the + buffer open, the channel buffer is freed. +=========== ============================================================ + +In order for a user application to make use of relay files, the +host filesystem must be mounted. For example:: + + mount -t debugfs debugfs /sys/kernel/debug + +.. Note:: + + the host filesystem doesn't need to be mounted for kernel + clients to create or use channels - it only needs to be + mounted when user space applications need access to the buffer + data. + + +The relay interface kernel API +============================== + +Here's a summary of the API the relay interface provides to in-kernel clients: + +TBD(curr. line MT:/API/) + channel management functions:: + + relay_open(base_filename, parent, subbuf_size, n_subbufs, + callbacks, private_data) + relay_close(chan) + relay_flush(chan) + relay_reset(chan) + + channel management typically called on instigation of userspace:: + + relay_subbufs_consumed(chan, cpu, subbufs_consumed) + + write functions:: + + relay_write(chan, data, length) + __relay_write(chan, data, length) + relay_reserve(chan, length) + + callbacks:: + + subbuf_start(buf, subbuf, prev_subbuf, prev_padding) + buf_mapped(buf, filp) + buf_unmapped(buf, filp) + create_buf_file(filename, parent, mode, buf, is_global) + remove_buf_file(dentry) + + helper functions:: + + relay_buf_full(buf) + subbuf_start_reserve(buf, length) + + +Creating a channel +------------------ + +relay_open() is used to create a channel, along with its per-cpu +channel buffers. Each channel buffer will have an associated file +created for it in the host filesystem, which can be and mmapped or +read from in user space. The files are named basename0...basenameN-1 +where N is the number of online cpus, and by default will be created +in the root of the filesystem (if the parent param is NULL). If you +want a directory structure to contain your relay files, you should +create it using the host filesystem's directory creation function, +e.g. debugfs_create_dir(), and pass the parent directory to +relay_open(). Users are responsible for cleaning up any directory +structure they create, when the channel is closed - again the host +filesystem's directory removal functions should be used for that, +e.g. debugfs_remove(). + +In order for a channel to be created and the host filesystem's files +associated with its channel buffers, the user must provide definitions +for two callback functions, create_buf_file() and remove_buf_file(). +create_buf_file() is called once for each per-cpu buffer from +relay_open() and allows the user to create the file which will be used +to represent the corresponding channel buffer. The callback should +return the dentry of the file created to represent the channel buffer. +remove_buf_file() must also be defined; it's responsible for deleting +the file(s) created in create_buf_file() and is called during +relay_close(). + +Here are some typical definitions for these callbacks, in this case +using debugfs:: + + /* + * create_buf_file() callback. Creates relay file in debugfs. + */ + static struct dentry *create_buf_file_handler(const char *filename, + struct dentry *parent, + umode_t mode, + struct rchan_buf *buf, + int *is_global) + { + return debugfs_create_file(filename, mode, parent, buf, + &relay_file_operations); + } + + /* + * remove_buf_file() callback. Removes relay file from debugfs. + */ + static int remove_buf_file_handler(struct dentry *dentry) + { + debugfs_remove(dentry); + + return 0; + } + + /* + * relay interface callbacks + */ + static struct rchan_callbacks relay_callbacks = + { + .create_buf_file = create_buf_file_handler, + .remove_buf_file = remove_buf_file_handler, + }; + +And an example relay_open() invocation using them:: + + chan = relay_open("cpu", NULL, SUBBUF_SIZE, N_SUBBUFS, &relay_callbacks, NULL); + +If the create_buf_file() callback fails, or isn't defined, channel +creation and thus relay_open() will fail. + +The total size of each per-cpu buffer is calculated by multiplying the +number of sub-buffers by the sub-buffer size passed into relay_open(). +The idea behind sub-buffers is that they're basically an extension of +double-buffering to N buffers, and they also allow applications to +easily implement random-access-on-buffer-boundary schemes, which can +be important for some high-volume applications. The number and size +of sub-buffers is completely dependent on the application and even for +the same application, different conditions will warrant different +values for these parameters at different times. Typically, the right +values to use are best decided after some experimentation; in general, +though, it's safe to assume that having only 1 sub-buffer is a bad +idea - you're guaranteed to either overwrite data or lose events +depending on the channel mode being used. + +The create_buf_file() implementation can also be defined in such a way +as to allow the creation of a single 'global' buffer instead of the +default per-cpu set. This can be useful for applications interested +mainly in seeing the relative ordering of system-wide events without +the need to bother with saving explicit timestamps for the purpose of +merging/sorting per-cpu files in a postprocessing step. + +To have relay_open() create a global buffer, the create_buf_file() +implementation should set the value of the is_global outparam to a +non-zero value in addition to creating the file that will be used to +represent the single buffer. In the case of a global buffer, +create_buf_file() and remove_buf_file() will be called only once. The +normal channel-writing functions, e.g. relay_write(), can still be +used - writes from any cpu will transparently end up in the global +buffer - but since it is a global buffer, callers should make sure +they use the proper locking for such a buffer, either by wrapping +writes in a spinlock, or by copying a write function from relay.h and +creating a local version that internally does the proper locking. + +The private_data passed into relay_open() allows clients to associate +user-defined data with a channel, and is immediately available +(including in create_buf_file()) via chan->private_data or +buf->chan->private_data. + +Buffer-only channels +-------------------- + +These channels have no files associated and can be created with +relay_open(NULL, NULL, ...). Such channels are useful in scenarios such +as when doing early tracing in the kernel, before the VFS is up. In these +cases, one may open a buffer-only channel and then call +relay_late_setup_files() when the kernel is ready to handle files, +to expose the buffered data to the userspace. + +Channel 'modes' +--------------- + +relay channels can be used in either of two modes - 'overwrite' or +'no-overwrite'. The mode is entirely determined by the implementation +of the subbuf_start() callback, as described below. The default if no +subbuf_start() callback is defined is 'no-overwrite' mode. If the +default mode suits your needs, and you plan to use the read() +interface to retrieve channel data, you can ignore the details of this +section, as it pertains mainly to mmap() implementations. + +In 'overwrite' mode, also known as 'flight recorder' mode, writes +continuously cycle around the buffer and will never fail, but will +unconditionally overwrite old data regardless of whether it's actually +been consumed. In no-overwrite mode, writes will fail, i.e. data will +be lost, if the number of unconsumed sub-buffers equals the total +number of sub-buffers in the channel. It should be clear that if +there is no consumer or if the consumer can't consume sub-buffers fast +enough, data will be lost in either case; the only difference is +whether data is lost from the beginning or the end of a buffer. + +As explained above, a relay channel is made of up one or more +per-cpu channel buffers, each implemented as a circular buffer +subdivided into one or more sub-buffers. Messages are written into +the current sub-buffer of the channel's current per-cpu buffer via the +write functions described below. Whenever a message can't fit into +the current sub-buffer, because there's no room left for it, the +client is notified via the subbuf_start() callback that a switch to a +new sub-buffer is about to occur. The client uses this callback to 1) +initialize the next sub-buffer if appropriate 2) finalize the previous +sub-buffer if appropriate and 3) return a boolean value indicating +whether or not to actually move on to the next sub-buffer. + +To implement 'no-overwrite' mode, the userspace client would provide +an implementation of the subbuf_start() callback something like the +following:: + + static int subbuf_start(struct rchan_buf *buf, + void *subbuf, + void *prev_subbuf, + unsigned int prev_padding) + { + if (prev_subbuf) + *((unsigned *)prev_subbuf) = prev_padding; + + if (relay_buf_full(buf)) + return 0; + + subbuf_start_reserve(buf, sizeof(unsigned int)); + + return 1; + } + +If the current buffer is full, i.e. all sub-buffers remain unconsumed, +the callback returns 0 to indicate that the buffer switch should not +occur yet, i.e. until the consumer has had a chance to read the +current set of ready sub-buffers. For the relay_buf_full() function +to make sense, the consumer is responsible for notifying the relay +interface when sub-buffers have been consumed via +relay_subbufs_consumed(). Any subsequent attempts to write into the +buffer will again invoke the subbuf_start() callback with the same +parameters; only when the consumer has consumed one or more of the +ready sub-buffers will relay_buf_full() return 0, in which case the +buffer switch can continue. + +The implementation of the subbuf_start() callback for 'overwrite' mode +would be very similar:: + + static int subbuf_start(struct rchan_buf *buf, + void *subbuf, + void *prev_subbuf, + size_t prev_padding) + { + if (prev_subbuf) + *((unsigned *)prev_subbuf) = prev_padding; + + subbuf_start_reserve(buf, sizeof(unsigned int)); + + return 1; + } + +In this case, the relay_buf_full() check is meaningless and the +callback always returns 1, causing the buffer switch to occur +unconditionally. It's also meaningless for the client to use the +relay_subbufs_consumed() function in this mode, as it's never +consulted. + +The default subbuf_start() implementation, used if the client doesn't +define any callbacks, or doesn't define the subbuf_start() callback, +implements the simplest possible 'no-overwrite' mode, i.e. it does +nothing but return 0. + +Header information can be reserved at the beginning of each sub-buffer +by calling the subbuf_start_reserve() helper function from within the +subbuf_start() callback. This reserved area can be used to store +whatever information the client wants. In the example above, room is +reserved in each sub-buffer to store the padding count for that +sub-buffer. This is filled in for the previous sub-buffer in the +subbuf_start() implementation; the padding value for the previous +sub-buffer is passed into the subbuf_start() callback along with a +pointer to the previous sub-buffer, since the padding value isn't +known until a sub-buffer is filled. The subbuf_start() callback is +also called for the first sub-buffer when the channel is opened, to +give the client a chance to reserve space in it. In this case the +previous sub-buffer pointer passed into the callback will be NULL, so +the client should check the value of the prev_subbuf pointer before +writing into the previous sub-buffer. + +Writing to a channel +-------------------- + +Kernel clients write data into the current cpu's channel buffer using +relay_write() or __relay_write(). relay_write() is the main logging +function - it uses local_irqsave() to protect the buffer and should be +used if you might be logging from interrupt context. If you know +you'll never be logging from interrupt context, you can use +__relay_write(), which only disables preemption. These functions +don't return a value, so you can't determine whether or not they +failed - the assumption is that you wouldn't want to check a return +value in the fast logging path anyway, and that they'll always succeed +unless the buffer is full and no-overwrite mode is being used, in +which case you can detect a failed write in the subbuf_start() +callback by calling the relay_buf_full() helper function. + +relay_reserve() is used to reserve a slot in a channel buffer which +can be written to later. This would typically be used in applications +that need to write directly into a channel buffer without having to +stage data in a temporary buffer beforehand. Because the actual write +may not happen immediately after the slot is reserved, applications +using relay_reserve() can keep a count of the number of bytes actually +written, either in space reserved in the sub-buffers themselves or as +a separate array. See the 'reserve' example in the relay-apps tarball +at http://relayfs.sourceforge.net for an example of how this can be +done. Because the write is under control of the client and is +separated from the reserve, relay_reserve() doesn't protect the buffer +at all - it's up to the client to provide the appropriate +synchronization when using relay_reserve(). + +Closing a channel +----------------- + +The client calls relay_close() when it's finished using the channel. +The channel and its associated buffers are destroyed when there are no +longer any references to any of the channel buffers. relay_flush() +forces a sub-buffer switch on all the channel buffers, and can be used +to finalize and process the last sub-buffers before the channel is +closed. + +Misc +---- + +Some applications may want to keep a channel around and re-use it +rather than open and close a new channel for each use. relay_reset() +can be used for this purpose - it resets a channel to its initial +state without reallocating channel buffer memory or destroying +existing mappings. It should however only be called when it's safe to +do so, i.e. when the channel isn't currently being written to. + +Finally, there are a couple of utility callbacks that can be used for +different purposes. buf_mapped() is called whenever a channel buffer +is mmapped from user space and buf_unmapped() is called when it's +unmapped. The client can use this notification to trigger actions +within the kernel application, such as enabling/disabling logging to +the channel. + + +Resources +========= + +For news, example code, mailing list, etc. see the relay interface homepage: + + http://relayfs.sourceforge.net + + +Credits +======= + +The ideas and specs for the relay interface came about as a result of +discussions on tracing involving the following: + +Michel Dagenais <michel.dagenais@polymtl.ca> +Richard Moore <richardj_moore@uk.ibm.com> +Bob Wisniewski <bob@watson.ibm.com> +Karim Yaghmour <karim@opersys.com> +Tom Zanussi <zanussi@us.ibm.com> + +Also thanks to Hubertus Franke for a lot of useful suggestions and bug +reports. diff --git a/Documentation/filesystems/romfs.rst b/Documentation/filesystems/romfs.rst new file mode 100644 index 000000000..465b11efa --- /dev/null +++ b/Documentation/filesystems/romfs.rst @@ -0,0 +1,194 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================= +ROMFS - ROM File System +======================= + +This is a quite dumb, read only filesystem, mainly for initial RAM +disks of installation disks. It has grown up by the need of having +modules linked at boot time. Using this filesystem, you get a very +similar feature, and even the possibility of a small kernel, with a +file system which doesn't take up useful memory from the router +functions in the basement of your office. + +For comparison, both the older minix and xiafs (the latter is now +defunct) filesystems, compiled as module need more than 20000 bytes, +while romfs is less than a page, about 4000 bytes (assuming i586 +code). Under the same conditions, the msdos filesystem would need +about 30K (and does not support device nodes or symlinks), while the +nfs module with nfsroot is about 57K. Furthermore, as a bit unfair +comparison, an actual rescue disk used up 3202 blocks with ext2, while +with romfs, it needed 3079 blocks. + +To create such a file system, you'll need a user program named +genromfs. It is available on http://romfs.sourceforge.net/ + +As the name suggests, romfs could be also used (space-efficiently) on +various read-only media, like (E)EPROM disks if someone will have the +motivation.. :) + +However, the main purpose of romfs is to have a very small kernel, +which has only this filesystem linked in, and then can load any module +later, with the current module utilities. It can also be used to run +some program to decide if you need SCSI devices, and even IDE or +floppy drives can be loaded later if you use the "initrd"--initial +RAM disk--feature of the kernel. This would not be really news +flash, but with romfs, you can even spare off your ext2 or minix or +maybe even affs filesystem until you really know that you need it. + +For example, a distribution boot disk can contain only the cd disk +drivers (and possibly the SCSI drivers), and the ISO 9660 filesystem +module. The kernel can be small enough, since it doesn't have other +filesystems, like the quite large ext2fs module, which can then be +loaded off the CD at a later stage of the installation. Another use +would be for a recovery disk, when you are reinstalling a workstation +from the network, and you will have all the tools/modules available +from a nearby server, so you don't want to carry two disks for this +purpose, just because it won't fit into ext2. + +romfs operates on block devices as you can expect, and the underlying +structure is very simple. Every accessible structure begins on 16 +byte boundaries for fast access. The minimum space a file will take +is 32 bytes (this is an empty file, with a less than 16 character +name). The maximum overhead for any non-empty file is the header, and +the 16 byte padding for the name and the contents, also 16+14+15 = 45 +bytes. This is quite rare however, since most file names are longer +than 3 bytes, and shorter than 15 bytes. + +The layout of the filesystem is the following:: + + offset content + + +---+---+---+---+ + 0 | - | r | o | m | \ + +---+---+---+---+ The ASCII representation of those bytes + 4 | 1 | f | s | - | / (i.e. "-rom1fs-") + +---+---+---+---+ + 8 | full size | The number of accessible bytes in this fs. + +---+---+---+---+ + 12 | checksum | The checksum of the FIRST 512 BYTES. + +---+---+---+---+ + 16 | volume name | The zero terminated name of the volume, + : : padded to 16 byte boundary. + +---+---+---+---+ + xx | file | + : headers : + +Every multi byte value (32 bit words, I'll use the longwords term from +now on) must be in big endian order. + +The first eight bytes identify the filesystem, even for the casual +inspector. After that, in the 3rd longword, it contains the number of +bytes accessible from the start of this filesystem. The 4th longword +is the checksum of the first 512 bytes (or the number of bytes +accessible, whichever is smaller). The applied algorithm is the same +as in the AFFS filesystem, namely a simple sum of the longwords +(assuming bigendian quantities again). For details, please consult +the source. This algorithm was chosen because although it's not quite +reliable, it does not require any tables, and it is very simple. + +The following bytes are now part of the file system; each file header +must begin on a 16 byte boundary:: + + offset content + + +---+---+---+---+ + 0 | next filehdr|X| The offset of the next file header + +---+---+---+---+ (zero if no more files) + 4 | spec.info | Info for directories/hard links/devices + +---+---+---+---+ + 8 | size | The size of this file in bytes + +---+---+---+---+ + 12 | checksum | Covering the meta data, including the file + +---+---+---+---+ name, and padding + 16 | file name | The zero terminated name of the file, + : : padded to 16 byte boundary + +---+---+---+---+ + xx | file data | + : : + +Since the file headers begin always at a 16 byte boundary, the lowest +4 bits would be always zero in the next filehdr pointer. These four +bits are used for the mode information. Bits 0..2 specify the type of +the file; while bit 4 shows if the file is executable or not. The +permissions are assumed to be world readable, if this bit is not set, +and world executable if it is; except the character and block devices, +they are never accessible for other than owner. The owner of every +file is user and group 0, this should never be a problem for the +intended use. The mapping of the 8 possible values to file types is +the following: + +== =============== ============================================ + mapping spec.info means +== =============== ============================================ + 0 hard link link destination [file header] + 1 directory first file's header + 2 regular file unused, must be zero [MBZ] + 3 symbolic link unused, MBZ (file data is the link content) + 4 block device 16/16 bits major/minor number + 5 char device - " - + 6 socket unused, MBZ + 7 fifo unused, MBZ +== =============== ============================================ + +Note that hard links are specifically marked in this filesystem, but +they will behave as you can expect (i.e. share the inode number). +Note also that it is your responsibility to not create hard link +loops, and creating all the . and .. links for directories. This is +normally done correctly by the genromfs program. Please refrain from +using the executable bits for special purposes on the socket and fifo +special files, they may have other uses in the future. Additionally, +please remember that only regular files, and symlinks are supposed to +have a nonzero size field; they contain the number of bytes available +directly after the (padded) file name. + +Another thing to note is that romfs works on file headers and data +aligned to 16 byte boundaries, but most hardware devices and the block +device drivers are unable to cope with smaller than block-sized data. +To overcome this limitation, the whole size of the file system must be +padded to an 1024 byte boundary. + +If you have any problems or suggestions concerning this file system, +please contact me. However, think twice before wanting me to add +features and code, because the primary and most important advantage of +this file system is the small code. On the other hand, don't be +alarmed, I'm not getting that much romfs related mail. Now I can +understand why Avery wrote poems in the ARCnet docs to get some more +feedback. :) + +romfs has also a mailing list, and to date, it hasn't received any +traffic, so you are welcome to join it to discuss your ideas. :) + +It's run by ezmlm, so you can subscribe to it by sending a message +to romfs-subscribe@shadow.banki.hu, the content is irrelevant. + +Pending issues: + +- Permissions and owner information are pretty essential features of a + Un*x like system, but romfs does not provide the full possibilities. + I have never found this limiting, but others might. + +- The file system is read only, so it can be very small, but in case + one would want to write _anything_ to a file system, he still needs + a writable file system, thus negating the size advantages. Possible + solutions: implement write access as a compile-time option, or a new, + similarly small writable filesystem for RAM disks. + +- Since the files are only required to have alignment on a 16 byte + boundary, it is currently possibly suboptimal to read or execute files + from the filesystem. It might be resolved by reordering file data to + have most of it (i.e. except the start and the end) laying at "natural" + boundaries, thus it would be possible to directly map a big portion of + the file contents to the mm subsystem. + +- Compression might be an useful feature, but memory is quite a + limiting factor in my eyes. + +- Where it is used? + +- Does it work on other architectures than intel and motorola? + + +Have fun, + +Janos Farkas <chexum@shadow.banki.hu> diff --git a/Documentation/filesystems/seq_file.rst b/Documentation/filesystems/seq_file.rst new file mode 100644 index 000000000..a6726082a --- /dev/null +++ b/Documentation/filesystems/seq_file.rst @@ -0,0 +1,396 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================== +The seq_file Interface +====================== + + Copyright 2003 Jonathan Corbet <corbet@lwn.net> + + This file is originally from the LWN.net Driver Porting series at + https://lwn.net/Articles/driver-porting/ + + +There are numerous ways for a device driver (or other kernel component) to +provide information to the user or system administrator. One useful +technique is the creation of virtual files, in debugfs, /proc or elsewhere. +Virtual files can provide human-readable output that is easy to get at +without any special utility programs; they can also make life easier for +script writers. It is not surprising that the use of virtual files has +grown over the years. + +Creating those files correctly has always been a bit of a challenge, +however. It is not that hard to make a virtual file which returns a +string. But life gets trickier if the output is long - anything greater +than an application is likely to read in a single operation. Handling +multiple reads (and seeks) requires careful attention to the reader's +position within the virtual file - that position is, likely as not, in the +middle of a line of output. The kernel has traditionally had a number of +implementations that got this wrong. + +The 2.6 kernel contains a set of functions (implemented by Alexander Viro) +which are designed to make it easy for virtual file creators to get it +right. + +The seq_file interface is available via <linux/seq_file.h>. There are +three aspects to seq_file: + + * An iterator interface which lets a virtual file implementation + step through the objects it is presenting. + + * Some utility functions for formatting objects for output without + needing to worry about things like output buffers. + + * A set of canned file_operations which implement most operations on + the virtual file. + +We'll look at the seq_file interface via an extremely simple example: a +loadable module which creates a file called /proc/sequence. The file, when +read, simply produces a set of increasing integer values, one per line. The +sequence will continue until the user loses patience and finds something +better to do. The file is seekable, in that one can do something like the +following:: + + dd if=/proc/sequence of=out1 count=1 + dd if=/proc/sequence skip=1 of=out2 count=1 + +Then concatenate the output files out1 and out2 and get the right +result. Yes, it is a thoroughly useless module, but the point is to show +how the mechanism works without getting lost in other details. (Those +wanting to see the full source for this module can find it at +https://lwn.net/Articles/22359/). + +Deprecated create_proc_entry +============================ + +Note that the above article uses create_proc_entry which was removed in +kernel 3.10. Current versions require the following update:: + + - entry = create_proc_entry("sequence", 0, NULL); + - if (entry) + - entry->proc_fops = &ct_file_ops; + + entry = proc_create("sequence", 0, NULL, &ct_file_ops); + +The iterator interface +====================== + +Modules implementing a virtual file with seq_file must implement an +iterator object that allows stepping through the data of interest +during a "session" (roughly one read() system call). If the iterator +is able to move to a specific position - like the file they implement, +though with freedom to map the position number to a sequence location +in whatever way is convenient - the iterator need only exist +transiently during a session. If the iterator cannot easily find a +numerical position but works well with a first/next interface, the +iterator can be stored in the private data area and continue from one +session to the next. + +A seq_file implementation that is formatting firewall rules from a +table, for example, could provide a simple iterator that interprets +position N as the Nth rule in the chain. A seq_file implementation +that presents the content of a, potentially volatile, linked list +might record a pointer into that list, providing that can be done +without risk of the current location being removed. + +Positioning can thus be done in whatever way makes the most sense for +the generator of the data, which need not be aware of how a position +translates to an offset in the virtual file. The one obvious exception +is that a position of zero should indicate the beginning of the file. + +The /proc/sequence iterator just uses the count of the next number it +will output as its position. + +Four functions must be implemented to make the iterator work. The +first, called start(), starts a session and takes a position as an +argument, returning an iterator which will start reading at that +position. The pos passed to start() will always be either zero, or +the most recent pos used in the previous session. + +For our simple sequence example, +the start() function looks like:: + + static void *ct_seq_start(struct seq_file *s, loff_t *pos) + { + loff_t *spos = kmalloc(sizeof(loff_t), GFP_KERNEL); + if (! spos) + return NULL; + *spos = *pos; + return spos; + } + +The entire data structure for this iterator is a single loff_t value +holding the current position. There is no upper bound for the sequence +iterator, but that will not be the case for most other seq_file +implementations; in most cases the start() function should check for a +"past end of file" condition and return NULL if need be. + +For more complicated applications, the private field of the seq_file +structure can be used to hold state from session to session. There is +also a special value which can be returned by the start() function +called SEQ_START_TOKEN; it can be used if you wish to instruct your +show() function (described below) to print a header at the top of the +output. SEQ_START_TOKEN should only be used if the offset is zero, +however. SEQ_START_TOKEN has no special meaning to the core seq_file +code. It is provided as a convenience for a start() funciton to +communicate with the next() and show() functions. + +The next function to implement is called, amazingly, next(); its job is to +move the iterator forward to the next position in the sequence. The +example module can simply increment the position by one; more useful +modules will do what is needed to step through some data structure. The +next() function returns a new iterator, or NULL if the sequence is +complete. Here's the example version:: + + static void *ct_seq_next(struct seq_file *s, void *v, loff_t *pos) + { + loff_t *spos = v; + *pos = ++*spos; + return spos; + } + +The next() function should set ``*pos`` to a value that start() can use +to find the new location in the sequence. When the iterator is being +stored in the private data area, rather than being reinitialized on each +start(), it might seem sufficient to simply set ``*pos`` to any non-zero +value (zero always tells start() to restart the sequence). This is not +sufficient due to historical problems. + +Historically, many next() functions have *not* updated ``*pos`` at +end-of-file. If the value is then used by start() to initialise the +iterator, this can result in corner cases where the last entry in the +sequence is reported twice in the file. In order to discourage this bug +from being resurrected, the core seq_file code now produces a warning if +a next() function does not change the value of ``*pos``. Consequently a +next() function *must* change the value of ``*pos``, and of course must +set it to a non-zero value. + +The stop() function closes a session; its job, of course, is to clean +up. If dynamic memory is allocated for the iterator, stop() is the +place to free it; if a lock was taken by start(), stop() must release +that lock. The value that ``*pos`` was set to by the last next() call +before stop() is remembered, and used for the first start() call of +the next session unless lseek() has been called on the file; in that +case next start() will be asked to start at position zero:: + + static void ct_seq_stop(struct seq_file *s, void *v) + { + kfree(v); + } + +Finally, the show() function should format the object currently pointed to +by the iterator for output. The example module's show() function is:: + + static int ct_seq_show(struct seq_file *s, void *v) + { + loff_t *spos = v; + seq_printf(s, "%lld\n", (long long)*spos); + return 0; + } + +If all is well, the show() function should return zero. A negative error +code in the usual manner indicates that something went wrong; it will be +passed back to user space. This function can also return SEQ_SKIP, which +causes the current item to be skipped; if the show() function has already +generated output before returning SEQ_SKIP, that output will be dropped. + +We will look at seq_printf() in a moment. But first, the definition of the +seq_file iterator is finished by creating a seq_operations structure with +the four functions we have just defined:: + + static const struct seq_operations ct_seq_ops = { + .start = ct_seq_start, + .next = ct_seq_next, + .stop = ct_seq_stop, + .show = ct_seq_show + }; + +This structure will be needed to tie our iterator to the /proc file in +a little bit. + +It's worth noting that the iterator value returned by start() and +manipulated by the other functions is considered to be completely opaque by +the seq_file code. It can thus be anything that is useful in stepping +through the data to be output. Counters can be useful, but it could also be +a direct pointer into an array or linked list. Anything goes, as long as +the programmer is aware that things can happen between calls to the +iterator function. However, the seq_file code (by design) will not sleep +between the calls to start() and stop(), so holding a lock during that time +is a reasonable thing to do. The seq_file code will also avoid taking any +other locks while the iterator is active. + +The iterater value returned by start() or next() is guaranteed to be +passed to a subsequent next() or stop() call. This allows resources +such as locks that were taken to be reliably released. There is *no* +guarantee that the iterator will be passed to show(), though in practice +it often will be. + + +Formatted output +================ + +The seq_file code manages positioning within the output created by the +iterator and getting it into the user's buffer. But, for that to work, that +output must be passed to the seq_file code. Some utility functions have +been defined which make this task easy. + +Most code will simply use seq_printf(), which works pretty much like +printk(), but which requires the seq_file pointer as an argument. + +For straight character output, the following functions may be used:: + + seq_putc(struct seq_file *m, char c); + seq_puts(struct seq_file *m, const char *s); + seq_escape(struct seq_file *m, const char *s, const char *esc); + +The first two output a single character and a string, just like one would +expect. seq_escape() is like seq_puts(), except that any character in s +which is in the string esc will be represented in octal form in the output. + +There are also a pair of functions for printing filenames:: + + int seq_path(struct seq_file *m, const struct path *path, + const char *esc); + int seq_path_root(struct seq_file *m, const struct path *path, + const struct path *root, const char *esc) + +Here, path indicates the file of interest, and esc is a set of characters +which should be escaped in the output. A call to seq_path() will output +the path relative to the current process's filesystem root. If a different +root is desired, it can be used with seq_path_root(). If it turns out that +path cannot be reached from root, seq_path_root() returns SEQ_SKIP. + +A function producing complicated output may want to check:: + + bool seq_has_overflowed(struct seq_file *m); + +and avoid further seq_<output> calls if true is returned. + +A true return from seq_has_overflowed means that the seq_file buffer will +be discarded and the seq_show function will attempt to allocate a larger +buffer and retry printing. + + +Making it all work +================== + +So far, we have a nice set of functions which can produce output within the +seq_file system, but we have not yet turned them into a file that a user +can see. Creating a file within the kernel requires, of course, the +creation of a set of file_operations which implement the operations on that +file. The seq_file interface provides a set of canned operations which do +most of the work. The virtual file author still must implement the open() +method, however, to hook everything up. The open function is often a single +line, as in the example module:: + + static int ct_open(struct inode *inode, struct file *file) + { + return seq_open(file, &ct_seq_ops); + } + +Here, the call to seq_open() takes the seq_operations structure we created +before, and gets set up to iterate through the virtual file. + +On a successful open, seq_open() stores the struct seq_file pointer in +file->private_data. If you have an application where the same iterator can +be used for more than one file, you can store an arbitrary pointer in the +private field of the seq_file structure; that value can then be retrieved +by the iterator functions. + +There is also a wrapper function to seq_open() called seq_open_private(). It +kmallocs a zero filled block of memory and stores a pointer to it in the +private field of the seq_file structure, returning 0 on success. The +block size is specified in a third parameter to the function, e.g.:: + + static int ct_open(struct inode *inode, struct file *file) + { + return seq_open_private(file, &ct_seq_ops, + sizeof(struct mystruct)); + } + +There is also a variant function, __seq_open_private(), which is functionally +identical except that, if successful, it returns the pointer to the allocated +memory block, allowing further initialisation e.g.:: + + static int ct_open(struct inode *inode, struct file *file) + { + struct mystruct *p = + __seq_open_private(file, &ct_seq_ops, sizeof(*p)); + + if (!p) + return -ENOMEM; + + p->foo = bar; /* initialize my stuff */ + ... + p->baz = true; + + return 0; + } + +A corresponding close function, seq_release_private() is available which +frees the memory allocated in the corresponding open. + +The other operations of interest - read(), llseek(), and release() - are +all implemented by the seq_file code itself. So a virtual file's +file_operations structure will look like:: + + static const struct file_operations ct_file_ops = { + .owner = THIS_MODULE, + .open = ct_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release + }; + +There is also a seq_release_private() which passes the contents of the +seq_file private field to kfree() before releasing the structure. + +The final step is the creation of the /proc file itself. In the example +code, that is done in the initialization code in the usual way:: + + static int ct_init(void) + { + struct proc_dir_entry *entry; + + proc_create("sequence", 0, NULL, &ct_file_ops); + return 0; + } + + module_init(ct_init); + +And that is pretty much it. + + +seq_list +======== + +If your file will be iterating through a linked list, you may find these +routines useful:: + + struct list_head *seq_list_start(struct list_head *head, + loff_t pos); + struct list_head *seq_list_start_head(struct list_head *head, + loff_t pos); + struct list_head *seq_list_next(void *v, struct list_head *head, + loff_t *ppos); + +These helpers will interpret pos as a position within the list and iterate +accordingly. Your start() and next() functions need only invoke the +``seq_list_*`` helpers with a pointer to the appropriate list_head structure. + + +The extra-simple version +======================== + +For extremely simple virtual files, there is an even easier interface. A +module can define only the show() function, which should create all the +output that the virtual file will contain. The file's open() method then +calls:: + + int single_open(struct file *file, + int (*show)(struct seq_file *m, void *p), + void *data); + +When output time comes, the show() function will be called once. The data +value given to single_open() can be found in the private field of the +seq_file structure. When using single_open(), the programmer should use +single_release() instead of seq_release() in the file_operations structure +to avoid a memory leak. diff --git a/Documentation/filesystems/sharedsubtree.rst b/Documentation/filesystems/sharedsubtree.rst new file mode 100644 index 000000000..d83395354 --- /dev/null +++ b/Documentation/filesystems/sharedsubtree.rst @@ -0,0 +1,995 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============== +Shared Subtrees +=============== + +.. Contents: + 1) Overview + 2) Features + 3) Setting mount states + 4) Use-case + 5) Detailed semantics + 6) Quiz + 7) FAQ + 8) Implementation + + +1) Overview +----------- + +Consider the following situation: + +A process wants to clone its own namespace, but still wants to access the CD +that got mounted recently. Shared subtree semantics provide the necessary +mechanism to accomplish the above. + +It provides the necessary building blocks for features like per-user-namespace +and versioned filesystem. + +2) Features +----------- + +Shared subtree provides four different flavors of mounts; struct vfsmount to be +precise + + a. shared mount + b. slave mount + c. private mount + d. unbindable mount + + +2a) A shared mount can be replicated to as many mountpoints and all the +replicas continue to be exactly same. + + Here is an example: + + Let's say /mnt has a mount that is shared:: + + mount --make-shared /mnt + + Note: mount(8) command now supports the --make-shared flag, + so the sample 'smount' program is no longer needed and has been + removed. + + :: + + # mount --bind /mnt /tmp + + The above command replicates the mount at /mnt to the mountpoint /tmp + and the contents of both the mounts remain identical. + + :: + + #ls /mnt + a b c + + #ls /tmp + a b c + + Now let's say we mount a device at /tmp/a:: + + # mount /dev/sd0 /tmp/a + + #ls /tmp/a + t1 t2 t3 + + #ls /mnt/a + t1 t2 t3 + + Note that the mount has propagated to the mount at /mnt as well. + + And the same is true even when /dev/sd0 is mounted on /mnt/a. The + contents will be visible under /tmp/a too. + + +2b) A slave mount is like a shared mount except that mount and umount events + only propagate towards it. + + All slave mounts have a master mount which is a shared. + + Here is an example: + + Let's say /mnt has a mount which is shared. + # mount --make-shared /mnt + + Let's bind mount /mnt to /tmp + # mount --bind /mnt /tmp + + the new mount at /tmp becomes a shared mount and it is a replica of + the mount at /mnt. + + Now let's make the mount at /tmp; a slave of /mnt + # mount --make-slave /tmp + + let's mount /dev/sd0 on /mnt/a + # mount /dev/sd0 /mnt/a + + #ls /mnt/a + t1 t2 t3 + + #ls /tmp/a + t1 t2 t3 + + Note the mount event has propagated to the mount at /tmp + + However let's see what happens if we mount something on the mount at /tmp + + # mount /dev/sd1 /tmp/b + + #ls /tmp/b + s1 s2 s3 + + #ls /mnt/b + + Note how the mount event has not propagated to the mount at + /mnt + + +2c) A private mount does not forward or receive propagation. + + This is the mount we are familiar with. Its the default type. + + +2d) A unbindable mount is a unbindable private mount + + let's say we have a mount at /mnt and we make it unbindable:: + + # mount --make-unbindable /mnt + + Let's try to bind mount this mount somewhere else:: + + # mount --bind /mnt /tmp + mount: wrong fs type, bad option, bad superblock on /mnt, + or too many mounted file systems + + Binding a unbindable mount is a invalid operation. + + +3) Setting mount states + + The mount command (util-linux package) can be used to set mount + states:: + + mount --make-shared mountpoint + mount --make-slave mountpoint + mount --make-private mountpoint + mount --make-unbindable mountpoint + + +4) Use cases +------------ + + A) A process wants to clone its own namespace, but still wants to + access the CD that got mounted recently. + + Solution: + + The system administrator can make the mount at /cdrom shared:: + + mount --bind /cdrom /cdrom + mount --make-shared /cdrom + + Now any process that clones off a new namespace will have a + mount at /cdrom which is a replica of the same mount in the + parent namespace. + + So when a CD is inserted and mounted at /cdrom that mount gets + propagated to the other mount at /cdrom in all the other clone + namespaces. + + B) A process wants its mounts invisible to any other process, but + still be able to see the other system mounts. + + Solution: + + To begin with, the administrator can mark the entire mount tree + as shareable:: + + mount --make-rshared / + + A new process can clone off a new namespace. And mark some part + of its namespace as slave:: + + mount --make-rslave /myprivatetree + + Hence forth any mounts within the /myprivatetree done by the + process will not show up in any other namespace. However mounts + done in the parent namespace under /myprivatetree still shows + up in the process's namespace. + + + Apart from the above semantics this feature provides the + building blocks to solve the following problems: + + C) Per-user namespace + + The above semantics allows a way to share mounts across + namespaces. But namespaces are associated with processes. If + namespaces are made first class objects with user API to + associate/disassociate a namespace with userid, then each user + could have his/her own namespace and tailor it to his/her + requirements. This needs to be supported in PAM. + + D) Versioned files + + If the entire mount tree is visible at multiple locations, then + an underlying versioning file system can return different + versions of the file depending on the path used to access that + file. + + An example is:: + + mount --make-shared / + mount --rbind / /view/v1 + mount --rbind / /view/v2 + mount --rbind / /view/v3 + mount --rbind / /view/v4 + + and if /usr has a versioning filesystem mounted, then that + mount appears at /view/v1/usr, /view/v2/usr, /view/v3/usr and + /view/v4/usr too + + A user can request v3 version of the file /usr/fs/namespace.c + by accessing /view/v3/usr/fs/namespace.c . The underlying + versioning filesystem can then decipher that v3 version of the + filesystem is being requested and return the corresponding + inode. + +5) Detailed semantics +--------------------- + The section below explains the detailed semantics of + bind, rbind, move, mount, umount and clone-namespace operations. + + Note: the word 'vfsmount' and the noun 'mount' have been used + to mean the same thing, throughout this document. + +5a) Mount states + + A given mount can be in one of the following states + + 1) shared + 2) slave + 3) shared and slave + 4) private + 5) unbindable + + A 'propagation event' is defined as event generated on a vfsmount + that leads to mount or unmount actions in other vfsmounts. + + A 'peer group' is defined as a group of vfsmounts that propagate + events to each other. + + (1) Shared mounts + + A 'shared mount' is defined as a vfsmount that belongs to a + 'peer group'. + + For example:: + + mount --make-shared /mnt + mount --bind /mnt /tmp + + The mount at /mnt and that at /tmp are both shared and belong + to the same peer group. Anything mounted or unmounted under + /mnt or /tmp reflect in all the other mounts of its peer + group. + + + (2) Slave mounts + + A 'slave mount' is defined as a vfsmount that receives + propagation events and does not forward propagation events. + + A slave mount as the name implies has a master mount from which + mount/unmount events are received. Events do not propagate from + the slave mount to the master. Only a shared mount can be made + a slave by executing the following command:: + + mount --make-slave mount + + A shared mount that is made as a slave is no more shared unless + modified to become shared. + + (3) Shared and Slave + + A vfsmount can be both shared as well as slave. This state + indicates that the mount is a slave of some vfsmount, and + has its own peer group too. This vfsmount receives propagation + events from its master vfsmount, and also forwards propagation + events to its 'peer group' and to its slave vfsmounts. + + Strictly speaking, the vfsmount is shared having its own + peer group, and this peer-group is a slave of some other + peer group. + + Only a slave vfsmount can be made as 'shared and slave' by + either executing the following command:: + + mount --make-shared mount + + or by moving the slave vfsmount under a shared vfsmount. + + (4) Private mount + + A 'private mount' is defined as vfsmount that does not + receive or forward any propagation events. + + (5) Unbindable mount + + A 'unbindable mount' is defined as vfsmount that does not + receive or forward any propagation events and cannot + be bind mounted. + + + State diagram: + + The state diagram below explains the state transition of a mount, + in response to various commands:: + + ----------------------------------------------------------------------- + | |make-shared | make-slave | make-private |make-unbindab| + --------------|------------|--------------|--------------|-------------| + |shared |shared |*slave/private| private | unbindable | + | | | | | | + |-------------|------------|--------------|--------------|-------------| + |slave |shared | **slave | private | unbindable | + | |and slave | | | | + |-------------|------------|--------------|--------------|-------------| + |shared |shared | slave | private | unbindable | + |and slave |and slave | | | | + |-------------|------------|--------------|--------------|-------------| + |private |shared | **private | private | unbindable | + |-------------|------------|--------------|--------------|-------------| + |unbindable |shared |**unbindable | private | unbindable | + ------------------------------------------------------------------------ + + * if the shared mount is the only mount in its peer group, making it + slave, makes it private automatically. Note that there is no master to + which it can be slaved to. + + ** slaving a non-shared mount has no effect on the mount. + + Apart from the commands listed below, the 'move' operation also changes + the state of a mount depending on type of the destination mount. Its + explained in section 5d. + +5b) Bind semantics + + Consider the following command:: + + mount --bind A/a B/b + + where 'A' is the source mount, 'a' is the dentry in the mount 'A', 'B' + is the destination mount and 'b' is the dentry in the destination mount. + + The outcome depends on the type of mount of 'A' and 'B'. The table + below contains quick reference:: + + -------------------------------------------------------------------------- + | BIND MOUNT OPERATION | + |************************************************************************| + |source(A)->| shared | private | slave | unbindable | + | dest(B) | | | | | + | | | | | | | + | v | | | | | + |************************************************************************| + | shared | shared | shared | shared & slave | invalid | + | | | | | | + |non-shared| shared | private | slave | invalid | + ************************************************************************** + + Details: + + 1. 'A' is a shared mount and 'B' is a shared mount. A new mount 'C' + which is clone of 'A', is created. Its root dentry is 'a' . 'C' is + mounted on mount 'B' at dentry 'b'. Also new mount 'C1', 'C2', 'C3' ... + are created and mounted at the dentry 'b' on all mounts where 'B' + propagates to. A new propagation tree containing 'C1',..,'Cn' is + created. This propagation tree is identical to the propagation tree of + 'B'. And finally the peer-group of 'C' is merged with the peer group + of 'A'. + + 2. 'A' is a private mount and 'B' is a shared mount. A new mount 'C' + which is clone of 'A', is created. Its root dentry is 'a'. 'C' is + mounted on mount 'B' at dentry 'b'. Also new mount 'C1', 'C2', 'C3' ... + are created and mounted at the dentry 'b' on all mounts where 'B' + propagates to. A new propagation tree is set containing all new mounts + 'C', 'C1', .., 'Cn' with exactly the same configuration as the + propagation tree for 'B'. + + 3. 'A' is a slave mount of mount 'Z' and 'B' is a shared mount. A new + mount 'C' which is clone of 'A', is created. Its root dentry is 'a' . + 'C' is mounted on mount 'B' at dentry 'b'. Also new mounts 'C1', 'C2', + 'C3' ... are created and mounted at the dentry 'b' on all mounts where + 'B' propagates to. A new propagation tree containing the new mounts + 'C','C1',.. 'Cn' is created. This propagation tree is identical to the + propagation tree for 'B'. And finally the mount 'C' and its peer group + is made the slave of mount 'Z'. In other words, mount 'C' is in the + state 'slave and shared'. + + 4. 'A' is a unbindable mount and 'B' is a shared mount. This is a + invalid operation. + + 5. 'A' is a private mount and 'B' is a non-shared(private or slave or + unbindable) mount. A new mount 'C' which is clone of 'A', is created. + Its root dentry is 'a'. 'C' is mounted on mount 'B' at dentry 'b'. + + 6. 'A' is a shared mount and 'B' is a non-shared mount. A new mount 'C' + which is a clone of 'A' is created. Its root dentry is 'a'. 'C' is + mounted on mount 'B' at dentry 'b'. 'C' is made a member of the + peer-group of 'A'. + + 7. 'A' is a slave mount of mount 'Z' and 'B' is a non-shared mount. A + new mount 'C' which is a clone of 'A' is created. Its root dentry is + 'a'. 'C' is mounted on mount 'B' at dentry 'b'. Also 'C' is set as a + slave mount of 'Z'. In other words 'A' and 'C' are both slave mounts of + 'Z'. All mount/unmount events on 'Z' propagates to 'A' and 'C'. But + mount/unmount on 'A' do not propagate anywhere else. Similarly + mount/unmount on 'C' do not propagate anywhere else. + + 8. 'A' is a unbindable mount and 'B' is a non-shared mount. This is a + invalid operation. A unbindable mount cannot be bind mounted. + +5c) Rbind semantics + + rbind is same as bind. Bind replicates the specified mount. Rbind + replicates all the mounts in the tree belonging to the specified mount. + Rbind mount is bind mount applied to all the mounts in the tree. + + If the source tree that is rbind has some unbindable mounts, + then the subtree under the unbindable mount is pruned in the new + location. + + eg: + + let's say we have the following mount tree:: + + A + / \ + B C + / \ / \ + D E F G + + Let's say all the mount except the mount C in the tree are + of a type other than unbindable. + + If this tree is rbound to say Z + + We will have the following tree at the new location:: + + Z + | + A' + / + B' Note how the tree under C is pruned + / \ in the new location. + D' E' + + + +5d) Move semantics + + Consider the following command + + mount --move A B/b + + where 'A' is the source mount, 'B' is the destination mount and 'b' is + the dentry in the destination mount. + + The outcome depends on the type of the mount of 'A' and 'B'. The table + below is a quick reference:: + + --------------------------------------------------------------------------- + | MOVE MOUNT OPERATION | + |************************************************************************** + | source(A)->| shared | private | slave | unbindable | + | dest(B) | | | | | + | | | | | | | + | v | | | | | + |************************************************************************** + | shared | shared | shared |shared and slave| invalid | + | | | | | | + |non-shared| shared | private | slave | unbindable | + *************************************************************************** + + .. Note:: moving a mount residing under a shared mount is invalid. + + Details follow: + + 1. 'A' is a shared mount and 'B' is a shared mount. The mount 'A' is + mounted on mount 'B' at dentry 'b'. Also new mounts 'A1', 'A2'...'An' + are created and mounted at dentry 'b' on all mounts that receive + propagation from mount 'B'. A new propagation tree is created in the + exact same configuration as that of 'B'. This new propagation tree + contains all the new mounts 'A1', 'A2'... 'An'. And this new + propagation tree is appended to the already existing propagation tree + of 'A'. + + 2. 'A' is a private mount and 'B' is a shared mount. The mount 'A' is + mounted on mount 'B' at dentry 'b'. Also new mount 'A1', 'A2'... 'An' + are created and mounted at dentry 'b' on all mounts that receive + propagation from mount 'B'. The mount 'A' becomes a shared mount and a + propagation tree is created which is identical to that of + 'B'. This new propagation tree contains all the new mounts 'A1', + 'A2'... 'An'. + + 3. 'A' is a slave mount of mount 'Z' and 'B' is a shared mount. The + mount 'A' is mounted on mount 'B' at dentry 'b'. Also new mounts 'A1', + 'A2'... 'An' are created and mounted at dentry 'b' on all mounts that + receive propagation from mount 'B'. A new propagation tree is created + in the exact same configuration as that of 'B'. This new propagation + tree contains all the new mounts 'A1', 'A2'... 'An'. And this new + propagation tree is appended to the already existing propagation tree of + 'A'. Mount 'A' continues to be the slave mount of 'Z' but it also + becomes 'shared'. + + 4. 'A' is a unbindable mount and 'B' is a shared mount. The operation + is invalid. Because mounting anything on the shared mount 'B' can + create new mounts that get mounted on the mounts that receive + propagation from 'B'. And since the mount 'A' is unbindable, cloning + it to mount at other mountpoints is not possible. + + 5. 'A' is a private mount and 'B' is a non-shared(private or slave or + unbindable) mount. The mount 'A' is mounted on mount 'B' at dentry 'b'. + + 6. 'A' is a shared mount and 'B' is a non-shared mount. The mount 'A' + is mounted on mount 'B' at dentry 'b'. Mount 'A' continues to be a + shared mount. + + 7. 'A' is a slave mount of mount 'Z' and 'B' is a non-shared mount. + The mount 'A' is mounted on mount 'B' at dentry 'b'. Mount 'A' + continues to be a slave mount of mount 'Z'. + + 8. 'A' is a unbindable mount and 'B' is a non-shared mount. The mount + 'A' is mounted on mount 'B' at dentry 'b'. Mount 'A' continues to be a + unbindable mount. + +5e) Mount semantics + + Consider the following command:: + + mount device B/b + + 'B' is the destination mount and 'b' is the dentry in the destination + mount. + + The above operation is the same as bind operation with the exception + that the source mount is always a private mount. + + +5f) Unmount semantics + + Consider the following command:: + + umount A + + where 'A' is a mount mounted on mount 'B' at dentry 'b'. + + If mount 'B' is shared, then all most-recently-mounted mounts at dentry + 'b' on mounts that receive propagation from mount 'B' and does not have + sub-mounts within them are unmounted. + + Example: Let's say 'B1', 'B2', 'B3' are shared mounts that propagate to + each other. + + let's say 'A1', 'A2', 'A3' are first mounted at dentry 'b' on mount + 'B1', 'B2' and 'B3' respectively. + + let's say 'C1', 'C2', 'C3' are next mounted at the same dentry 'b' on + mount 'B1', 'B2' and 'B3' respectively. + + if 'C1' is unmounted, all the mounts that are most-recently-mounted on + 'B1' and on the mounts that 'B1' propagates-to are unmounted. + + 'B1' propagates to 'B2' and 'B3'. And the most recently mounted mount + on 'B2' at dentry 'b' is 'C2', and that of mount 'B3' is 'C3'. + + So all 'C1', 'C2' and 'C3' should be unmounted. + + If any of 'C2' or 'C3' has some child mounts, then that mount is not + unmounted, but all other mounts are unmounted. However if 'C1' is told + to be unmounted and 'C1' has some sub-mounts, the umount operation is + failed entirely. + +5g) Clone Namespace + + A cloned namespace contains all the mounts as that of the parent + namespace. + + Let's say 'A' and 'B' are the corresponding mounts in the parent and the + child namespace. + + If 'A' is shared, then 'B' is also shared and 'A' and 'B' propagate to + each other. + + If 'A' is a slave mount of 'Z', then 'B' is also the slave mount of + 'Z'. + + If 'A' is a private mount, then 'B' is a private mount too. + + If 'A' is unbindable mount, then 'B' is a unbindable mount too. + + +6) Quiz + + A. What is the result of the following command sequence? + + :: + + mount --bind /mnt /mnt + mount --make-shared /mnt + mount --bind /mnt /tmp + mount --move /tmp /mnt/1 + + what should be the contents of /mnt /mnt/1 /mnt/1/1 should be? + Should they all be identical? or should /mnt and /mnt/1 be + identical only? + + + B. What is the result of the following command sequence? + + :: + + mount --make-rshared / + mkdir -p /v/1 + mount --rbind / /v/1 + + what should be the content of /v/1/v/1 be? + + + C. What is the result of the following command sequence? + + :: + + mount --bind /mnt /mnt + mount --make-shared /mnt + mkdir -p /mnt/1/2/3 /mnt/1/test + mount --bind /mnt/1 /tmp + mount --make-slave /mnt + mount --make-shared /mnt + mount --bind /mnt/1/2 /tmp1 + mount --make-slave /mnt + + At this point we have the first mount at /tmp and + its root dentry is 1. Let's call this mount 'A' + And then we have a second mount at /tmp1 with root + dentry 2. Let's call this mount 'B' + Next we have a third mount at /mnt with root dentry + mnt. Let's call this mount 'C' + + 'B' is the slave of 'A' and 'C' is a slave of 'B' + A -> B -> C + + at this point if we execute the following command + + mount --bind /bin /tmp/test + + The mount is attempted on 'A' + + will the mount propagate to 'B' and 'C' ? + + what would be the contents of + /mnt/1/test be? + +7) FAQ + + Q1. Why is bind mount needed? How is it different from symbolic links? + symbolic links can get stale if the destination mount gets + unmounted or moved. Bind mounts continue to exist even if the + other mount is unmounted or moved. + + Q2. Why can't the shared subtree be implemented using exportfs? + + exportfs is a heavyweight way of accomplishing part of what + shared subtree can do. I cannot imagine a way to implement the + semantics of slave mount using exportfs? + + Q3 Why is unbindable mount needed? + + Let's say we want to replicate the mount tree at multiple + locations within the same subtree. + + if one rbind mounts a tree within the same subtree 'n' times + the number of mounts created is an exponential function of 'n'. + Having unbindable mount can help prune the unneeded bind + mounts. Here is an example. + + step 1: + let's say the root tree has just two directories with + one vfsmount:: + + root + / \ + tmp usr + + And we want to replicate the tree at multiple + mountpoints under /root/tmp + + step 2: + :: + + + mount --make-shared /root + + mkdir -p /tmp/m1 + + mount --rbind /root /tmp/m1 + + the new tree now looks like this:: + + root + / \ + tmp usr + / + m1 + / \ + tmp usr + / + m1 + + it has two vfsmounts + + step 3: + :: + + mkdir -p /tmp/m2 + mount --rbind /root /tmp/m2 + + the new tree now looks like this:: + + root + / \ + tmp usr + / \ + m1 m2 + / \ / \ + tmp usr tmp usr + / \ / + m1 m2 m1 + / \ / \ + tmp usr tmp usr + / / \ + m1 m1 m2 + / \ + tmp usr + / \ + m1 m2 + + it has 6 vfsmounts + + step 4: + :: + mkdir -p /tmp/m3 + mount --rbind /root /tmp/m3 + + I won't draw the tree..but it has 24 vfsmounts + + + at step i the number of vfsmounts is V[i] = i*V[i-1]. + This is an exponential function. And this tree has way more + mounts than what we really needed in the first place. + + One could use a series of umount at each step to prune + out the unneeded mounts. But there is a better solution. + Unclonable mounts come in handy here. + + step 1: + let's say the root tree has just two directories with + one vfsmount:: + + root + / \ + tmp usr + + How do we set up the same tree at multiple locations under + /root/tmp + + step 2: + :: + + + mount --bind /root/tmp /root/tmp + + mount --make-rshared /root + mount --make-unbindable /root/tmp + + mkdir -p /tmp/m1 + + mount --rbind /root /tmp/m1 + + the new tree now looks like this:: + + root + / \ + tmp usr + / + m1 + / \ + tmp usr + + step 3: + :: + + mkdir -p /tmp/m2 + mount --rbind /root /tmp/m2 + + the new tree now looks like this:: + + root + / \ + tmp usr + / \ + m1 m2 + / \ / \ + tmp usr tmp usr + + step 4: + :: + + mkdir -p /tmp/m3 + mount --rbind /root /tmp/m3 + + the new tree now looks like this:: + + root + / \ + tmp usr + / \ \ + m1 m2 m3 + / \ / \ / \ + tmp usr tmp usr tmp usr + +8) Implementation + +8A) Datastructure + + 4 new fields are introduced to struct vfsmount: + + * ->mnt_share + * ->mnt_slave_list + * ->mnt_slave + * ->mnt_master + + ->mnt_share + links together all the mount to/from which this vfsmount + send/receives propagation events. + + ->mnt_slave_list + links all the mounts to which this vfsmount propagates + to. + + ->mnt_slave + links together all the slaves that its master vfsmount + propagates to. + + ->mnt_master + points to the master vfsmount from which this vfsmount + receives propagation. + + ->mnt_flags + takes two more flags to indicate the propagation status of + the vfsmount. MNT_SHARE indicates that the vfsmount is a shared + vfsmount. MNT_UNCLONABLE indicates that the vfsmount cannot be + replicated. + + All the shared vfsmounts in a peer group form a cyclic list through + ->mnt_share. + + All vfsmounts with the same ->mnt_master form on a cyclic list anchored + in ->mnt_master->mnt_slave_list and going through ->mnt_slave. + + ->mnt_master can point to arbitrary (and possibly different) members + of master peer group. To find all immediate slaves of a peer group + you need to go through _all_ ->mnt_slave_list of its members. + Conceptually it's just a single set - distribution among the + individual lists does not affect propagation or the way propagation + tree is modified by operations. + + All vfsmounts in a peer group have the same ->mnt_master. If it is + non-NULL, they form a contiguous (ordered) segment of slave list. + + A example propagation tree looks as shown in the figure below. + [ NOTE: Though it looks like a forest, if we consider all the shared + mounts as a conceptual entity called 'pnode', it becomes a tree]:: + + + A <--> B <--> C <---> D + /|\ /| |\ + / F G J K H I + / + E<-->K + /|\ + M L N + + In the above figure A,B,C and D all are shared and propagate to each + other. 'A' has got 3 slave mounts 'E' 'F' and 'G' 'C' has got 2 slave + mounts 'J' and 'K' and 'D' has got two slave mounts 'H' and 'I'. + 'E' is also shared with 'K' and they propagate to each other. And + 'K' has 3 slaves 'M', 'L' and 'N' + + A's ->mnt_share links with the ->mnt_share of 'B' 'C' and 'D' + + A's ->mnt_slave_list links with ->mnt_slave of 'E', 'K', 'F' and 'G' + + E's ->mnt_share links with ->mnt_share of K + + 'E', 'K', 'F', 'G' have their ->mnt_master point to struct vfsmount of 'A' + + 'M', 'L', 'N' have their ->mnt_master point to struct vfsmount of 'K' + + K's ->mnt_slave_list links with ->mnt_slave of 'M', 'L' and 'N' + + C's ->mnt_slave_list links with ->mnt_slave of 'J' and 'K' + + J and K's ->mnt_master points to struct vfsmount of C + + and finally D's ->mnt_slave_list links with ->mnt_slave of 'H' and 'I' + + 'H' and 'I' have their ->mnt_master pointing to struct vfsmount of 'D'. + + + NOTE: The propagation tree is orthogonal to the mount tree. + +8B Locking: + + ->mnt_share, ->mnt_slave, ->mnt_slave_list, ->mnt_master are protected + by namespace_sem (exclusive for modifications, shared for reading). + + Normally we have ->mnt_flags modifications serialized by vfsmount_lock. + There are two exceptions: do_add_mount() and clone_mnt(). + The former modifies a vfsmount that has not been visible in any shared + data structures yet. + The latter holds namespace_sem and the only references to vfsmount + are in lists that can't be traversed without namespace_sem. + +8C Algorithm: + + The crux of the implementation resides in rbind/move operation. + + The overall algorithm breaks the operation into 3 phases: (look at + attach_recursive_mnt() and propagate_mnt()) + + 1. prepare phase. + 2. commit phases. + 3. abort phases. + + Prepare phase: + + for each mount in the source tree: + + a) Create the necessary number of mount trees to + be attached to each of the mounts that receive + propagation from the destination mount. + b) Do not attach any of the trees to its destination. + However note down its ->mnt_parent and ->mnt_mountpoint + c) Link all the new mounts to form a propagation tree that + is identical to the propagation tree of the destination + mount. + + If this phase is successful, there should be 'n' new + propagation trees; where 'n' is the number of mounts in the + source tree. Go to the commit phase + + Also there should be 'm' new mount trees, where 'm' is + the number of mounts to which the destination mount + propagates to. + + if any memory allocations fail, go to the abort phase. + + Commit phase + attach each of the mount trees to their corresponding + destination mounts. + + Abort phase + delete all the newly created trees. + + .. Note:: + all the propagation related functionality resides in the file pnode.c + + +------------------------------------------------------------------------ + +version 0.1 (created the initial document, Ram Pai linuxram@us.ibm.com) + +version 0.2 (Incorporated comments from Al Viro) diff --git a/Documentation/filesystems/splice.rst b/Documentation/filesystems/splice.rst new file mode 100644 index 000000000..edd874808 --- /dev/null +++ b/Documentation/filesystems/splice.rst @@ -0,0 +1,22 @@ +================ +splice and pipes +================ + +splice API +========== + +splice is a method for moving blocks of data around inside the kernel, +without continually transferring them between the kernel and user space. + +.. kernel-doc:: fs/splice.c + +pipes API +========= + +Pipe interfaces are all for in-kernel (builtin image) use. They are not +exported for use by modules. + +.. kernel-doc:: include/linux/pipe_fs_i.h + :internal: + +.. kernel-doc:: fs/pipe.c diff --git a/Documentation/filesystems/spufs/index.rst b/Documentation/filesystems/spufs/index.rst new file mode 100644 index 000000000..5ed4a8494 --- /dev/null +++ b/Documentation/filesystems/spufs/index.rst @@ -0,0 +1,13 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============== +SPU Filesystem +============== + + +.. toctree:: + :maxdepth: 1 + + spufs + spu_create + spu_run diff --git a/Documentation/filesystems/spufs/spu_create.rst b/Documentation/filesystems/spufs/spu_create.rst new file mode 100644 index 000000000..83108c099 --- /dev/null +++ b/Documentation/filesystems/spufs/spu_create.rst @@ -0,0 +1,131 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========== +spu_create +========== + +Name +==== + spu_create - create a new spu context + + +Synopsis +======== + + :: + + #include <sys/types.h> + #include <sys/spu.h> + + int spu_create(const char *pathname, int flags, mode_t mode); + +Description +=========== + The spu_create system call is used on PowerPC machines that implement + the Cell Broadband Engine Architecture in order to access Synergistic + Processor Units (SPUs). It creates a new logical context for an SPU in + pathname and returns a handle to associated with it. pathname must + point to a non-existing directory in the mount point of the SPU file + system (spufs). When spu_create is successful, a directory gets cre- + ated on pathname and it is populated with files. + + The returned file handle can only be passed to spu_run(2) or closed, + other operations are not defined on it. When it is closed, all associ- + ated directory entries in spufs are removed. When the last file handle + pointing either inside of the context directory or to this file + descriptor is closed, the logical SPU context is destroyed. + + The parameter flags can be zero or any bitwise or'd combination of the + following constants: + + SPU_RAWIO + Allow mapping of some of the hardware registers of the SPU into + user space. This flag requires the CAP_SYS_RAWIO capability, see + capabilities(7). + + The mode parameter specifies the permissions used for creating the new + directory in spufs. mode is modified with the user's umask(2) value + and then used for both the directory and the files contained in it. The + file permissions mask out some more bits of mode because they typically + support only read or write access. See stat(2) for a full list of the + possible mode values. + + +Return Value +============ + spu_create returns a new file descriptor. It may return -1 to indicate + an error condition and set errno to one of the error codes listed + below. + + +Errors +====== + EACCES + The current user does not have write access on the spufs mount + point. + + EEXIST An SPU context already exists at the given path name. + + EFAULT pathname is not a valid string pointer in the current address + space. + + EINVAL pathname is not a directory in the spufs mount point. + + ELOOP Too many symlinks were found while resolving pathname. + + EMFILE The process has reached its maximum open file limit. + + ENAMETOOLONG + pathname was too long. + + ENFILE The system has reached the global open file limit. + + ENOENT Part of pathname could not be resolved. + + ENOMEM The kernel could not allocate all resources required. + + ENOSPC There are not enough SPU resources available to create a new + context or the user specific limit for the number of SPU con- + texts has been reached. + + ENOSYS the functionality is not provided by the current system, because + either the hardware does not provide SPUs or the spufs module is + not loaded. + + ENOTDIR + A part of pathname is not a directory. + + + +Notes +===== + spu_create is meant to be used from libraries that implement a more + abstract interface to SPUs, not to be used from regular applications. + See http://www.bsc.es/projects/deepcomputing/linuxoncell/ for the rec- + ommended libraries. + + +Files +===== + pathname must point to a location beneath the mount point of spufs. By + convention, it gets mounted in /spu. + + +Conforming to +============= + This call is Linux specific and only implemented by the ppc64 architec- + ture. Programs using this system call are not portable. + + +Bugs +==== + The code does not yet fully implement all features lined out here. + + +Author +====== + Arnd Bergmann <arndb@de.ibm.com> + +See Also +======== + capabilities(7), close(2), spu_run(2), spufs(7) diff --git a/Documentation/filesystems/spufs/spu_run.rst b/Documentation/filesystems/spufs/spu_run.rst new file mode 100644 index 000000000..7fdb1c31c --- /dev/null +++ b/Documentation/filesystems/spufs/spu_run.rst @@ -0,0 +1,138 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======= +spu_run +======= + + +Name +==== + spu_run - execute an spu context + + +Synopsis +======== + + :: + + #include <sys/spu.h> + + int spu_run(int fd, unsigned int *npc, unsigned int *event); + +Description +=========== + The spu_run system call is used on PowerPC machines that implement the + Cell Broadband Engine Architecture in order to access Synergistic Pro- + cessor Units (SPUs). It uses the fd that was returned from spu_cre- + ate(2) to address a specific SPU context. When the context gets sched- + uled to a physical SPU, it starts execution at the instruction pointer + passed in npc. + + Execution of SPU code happens synchronously, meaning that spu_run does + not return while the SPU is still running. If there is a need to exe- + cute SPU code in parallel with other code on either the main CPU or + other SPUs, you need to create a new thread of execution first, e.g. + using the pthread_create(3) call. + + When spu_run returns, the current value of the SPU instruction pointer + is written back to npc, so you can call spu_run again without updating + the pointers. + + event can be a NULL pointer or point to an extended status code that + gets filled when spu_run returns. It can be one of the following con- + stants: + + SPE_EVENT_DMA_ALIGNMENT + A DMA alignment error + + SPE_EVENT_SPE_DATA_SEGMENT + A DMA segmentation error + + SPE_EVENT_SPE_DATA_STORAGE + A DMA storage error + + If NULL is passed as the event argument, these errors will result in a + signal delivered to the calling process. + +Return Value +============ + spu_run returns the value of the spu_status register or -1 to indicate + an error and set errno to one of the error codes listed below. The + spu_status register value contains a bit mask of status codes and + optionally a 14 bit code returned from the stop-and-signal instruction + on the SPU. The bit masks for the status codes are: + + 0x02 + SPU was stopped by stop-and-signal. + + 0x04 + SPU was stopped by halt. + + 0x08 + SPU is waiting for a channel. + + 0x10 + SPU is in single-step mode. + + 0x20 + SPU has tried to execute an invalid instruction. + + 0x40 + SPU has tried to access an invalid channel. + + 0x3fff0000 + The bits masked with this value contain the code returned from + stop-and-signal. + + There are always one or more of the lower eight bits set or an error + code is returned from spu_run. + +Errors +====== + EAGAIN or EWOULDBLOCK + fd is in non-blocking mode and spu_run would block. + + EBADF fd is not a valid file descriptor. + + EFAULT npc is not a valid pointer or status is neither NULL nor a valid + pointer. + + EINTR A signal occurred while spu_run was in progress. The npc value + has been updated to the new program counter value if necessary. + + EINVAL fd is not a file descriptor returned from spu_create(2). + + ENOMEM Insufficient memory was available to handle a page fault result- + ing from an MFC direct memory access. + + ENOSYS the functionality is not provided by the current system, because + either the hardware does not provide SPUs or the spufs module is + not loaded. + + +Notes +===== + spu_run is meant to be used from libraries that implement a more + abstract interface to SPUs, not to be used from regular applications. + See http://www.bsc.es/projects/deepcomputing/linuxoncell/ for the rec- + ommended libraries. + + +Conforming to +============= + This call is Linux specific and only implemented by the ppc64 architec- + ture. Programs using this system call are not portable. + + +Bugs +==== + The code does not yet fully implement all features lined out here. + + +Author +====== + Arnd Bergmann <arndb@de.ibm.com> + +See Also +======== + capabilities(7), close(2), spu_create(2), spufs(7) diff --git a/Documentation/filesystems/spufs/spufs.rst b/Documentation/filesystems/spufs/spufs.rst new file mode 100644 index 000000000..8a42859bb --- /dev/null +++ b/Documentation/filesystems/spufs/spufs.rst @@ -0,0 +1,273 @@ +.. SPDX-License-Identifier: GPL-2.0 + +===== +spufs +===== + +Name +==== + + spufs - the SPU file system + + +Description +=========== + + The SPU file system is used on PowerPC machines that implement the Cell + Broadband Engine Architecture in order to access Synergistic Processor + Units (SPUs). + + The file system provides a name space similar to posix shared memory or + message queues. Users that have write permissions on the file system + can use spu_create(2) to establish SPU contexts in the spufs root. + + Every SPU context is represented by a directory containing a predefined + set of files. These files can be used for manipulating the state of the + logical SPU. Users can change permissions on those files, but not actu- + ally add or remove files. + + +Mount Options +============= + + uid=<uid> + set the user owning the mount point, the default is 0 (root). + + gid=<gid> + set the group owning the mount point, the default is 0 (root). + + +Files +===== + + The files in spufs mostly follow the standard behavior for regular sys- + tem calls like read(2) or write(2), but often support only a subset of + the operations supported on regular file systems. This list details the + supported operations and the deviations from the behaviour in the + respective man pages. + + All files that support the read(2) operation also support readv(2) and + all files that support the write(2) operation also support writev(2). + All files support the access(2) and stat(2) family of operations, but + only the st_mode, st_nlink, st_uid and st_gid fields of struct stat + contain reliable information. + + All files support the chmod(2)/fchmod(2) and chown(2)/fchown(2) opera- + tions, but will not be able to grant permissions that contradict the + possible operations, e.g. read access on the wbox file. + + The current set of files is: + + + /mem + the contents of the local storage memory of the SPU. This can be + accessed like a regular shared memory file and contains both code and + data in the address space of the SPU. The possible operations on an + open mem file are: + + read(2), pread(2), write(2), pwrite(2), lseek(2) + These operate as documented, with the exception that seek(2), + write(2) and pwrite(2) are not supported beyond the end of the + file. The file size is the size of the local storage of the SPU, + which normally is 256 kilobytes. + + mmap(2) + Mapping mem into the process address space gives access to the + SPU local storage within the process address space. Only + MAP_SHARED mappings are allowed. + + + /mbox + The first SPU to CPU communication mailbox. This file is read-only and + can be read in units of 32 bits. The file can only be used in non- + blocking mode and it even poll() will not block on it. The possible + operations on an open mbox file are: + + read(2) + If a count smaller than four is requested, read returns -1 and + sets errno to EINVAL. If there is no data available in the mail + box, the return value is set to -1 and errno becomes EAGAIN. + When data has been read successfully, four bytes are placed in + the data buffer and the value four is returned. + + + /ibox + The second SPU to CPU communication mailbox. This file is similar to + the first mailbox file, but can be read in blocking I/O mode, and the + poll family of system calls can be used to wait for it. The possible + operations on an open ibox file are: + + read(2) + If a count smaller than four is requested, read returns -1 and + sets errno to EINVAL. If there is no data available in the mail + box and the file descriptor has been opened with O_NONBLOCK, the + return value is set to -1 and errno becomes EAGAIN. + + If there is no data available in the mail box and the file + descriptor has been opened without O_NONBLOCK, the call will + block until the SPU writes to its interrupt mailbox channel. + When data has been read successfully, four bytes are placed in + the data buffer and the value four is returned. + + poll(2) + Poll on the ibox file returns (POLLIN | POLLRDNORM) whenever + data is available for reading. + + + /wbox + The CPU to SPU communation mailbox. It is write-only and can be written + in units of 32 bits. If the mailbox is full, write() will block and + poll can be used to wait for it becoming empty again. The possible + operations on an open wbox file are: write(2) If a count smaller than + four is requested, write returns -1 and sets errno to EINVAL. If there + is no space available in the mail box and the file descriptor has been + opened with O_NONBLOCK, the return value is set to -1 and errno becomes + EAGAIN. + + If there is no space available in the mail box and the file descriptor + has been opened without O_NONBLOCK, the call will block until the SPU + reads from its PPE mailbox channel. When data has been read success- + fully, four bytes are placed in the data buffer and the value four is + returned. + + poll(2) + Poll on the ibox file returns (POLLOUT | POLLWRNORM) whenever + space is available for writing. + + + /mbox_stat, /ibox_stat, /wbox_stat + Read-only files that contain the length of the current queue, i.e. how + many words can be read from mbox or ibox or how many words can be + written to wbox without blocking. The files can be read only in 4-byte + units and return a big-endian binary integer number. The possible + operations on an open ``*box_stat`` file are: + + read(2) + If a count smaller than four is requested, read returns -1 and + sets errno to EINVAL. Otherwise, a four byte value is placed in + the data buffer, containing the number of elements that can be + read from (for mbox_stat and ibox_stat) or written to (for + wbox_stat) the respective mail box without blocking or resulting + in EAGAIN. + + + /npc, /decr, /decr_status, /spu_tag_mask, /event_mask, /srr0 + Internal registers of the SPU. The representation is an ASCII string + with the numeric value of the next instruction to be executed. These + can be used in read/write mode for debugging, but normal operation of + programs should not rely on them because access to any of them except + npc requires an SPU context save and is therefore very inefficient. + + The contents of these files are: + + =================== =================================== + npc Next Program Counter + decr SPU Decrementer + decr_status Decrementer Status + spu_tag_mask MFC tag mask for SPU DMA + event_mask Event mask for SPU interrupts + srr0 Interrupt Return address register + =================== =================================== + + + The possible operations on an open npc, decr, decr_status, + spu_tag_mask, event_mask or srr0 file are: + + read(2) + When the count supplied to the read call is shorter than the + required length for the pointer value plus a newline character, + subsequent reads from the same file descriptor will result in + completing the string, regardless of changes to the register by + a running SPU task. When a complete string has been read, all + subsequent read operations will return zero bytes and a new file + descriptor needs to be opened to read the value again. + + write(2) + A write operation on the file results in setting the register to + the value given in the string. The string is parsed from the + beginning to the first non-numeric character or the end of the + buffer. Subsequent writes to the same file descriptor overwrite + the previous setting. + + + /fpcr + This file gives access to the Floating Point Status and Control Regis- + ter as a four byte long file. The operations on the fpcr file are: + + read(2) + If a count smaller than four is requested, read returns -1 and + sets errno to EINVAL. Otherwise, a four byte value is placed in + the data buffer, containing the current value of the fpcr regis- + ter. + + write(2) + If a count smaller than four is requested, write returns -1 and + sets errno to EINVAL. Otherwise, a four byte value is copied + from the data buffer, updating the value of the fpcr register. + + + /signal1, /signal2 + The two signal notification channels of an SPU. These are read-write + files that operate on a 32 bit word. Writing to one of these files + triggers an interrupt on the SPU. The value written to the signal + files can be read from the SPU through a channel read or from host user + space through the file. After the value has been read by the SPU, it + is reset to zero. The possible operations on an open signal1 or sig- + nal2 file are: + + read(2) + If a count smaller than four is requested, read returns -1 and + sets errno to EINVAL. Otherwise, a four byte value is placed in + the data buffer, containing the current value of the specified + signal notification register. + + write(2) + If a count smaller than four is requested, write returns -1 and + sets errno to EINVAL. Otherwise, a four byte value is copied + from the data buffer, updating the value of the specified signal + notification register. The signal notification register will + either be replaced with the input data or will be updated to the + bitwise OR or the old value and the input data, depending on the + contents of the signal1_type, or signal2_type respectively, + file. + + + /signal1_type, /signal2_type + These two files change the behavior of the signal1 and signal2 notifi- + cation files. The contain a numerical ASCII string which is read as + either "1" or "0". In mode 0 (overwrite), the hardware replaces the + contents of the signal channel with the data that is written to it. in + mode 1 (logical OR), the hardware accumulates the bits that are subse- + quently written to it. The possible operations on an open signal1_type + or signal2_type file are: + + read(2) + When the count supplied to the read call is shorter than the + required length for the digit plus a newline character, subse- + quent reads from the same file descriptor will result in com- + pleting the string. When a complete string has been read, all + subsequent read operations will return zero bytes and a new file + descriptor needs to be opened to read the value again. + + write(2) + A write operation on the file results in setting the register to + the value given in the string. The string is parsed from the + beginning to the first non-numeric character or the end of the + buffer. Subsequent writes to the same file descriptor overwrite + the previous setting. + + +Examples +======== + /etc/fstab entry + none /spu spufs gid=spu 0 0 + + +Authors +======= + Arnd Bergmann <arndb@de.ibm.com>, Mark Nutter <mnutter@us.ibm.com>, + Ulrich Weigand <Ulrich.Weigand@de.ibm.com> + +See Also +======== + capabilities(7), close(2), spu_create(2), spu_run(2), spufs(7) diff --git a/Documentation/filesystems/squashfs.rst b/Documentation/filesystems/squashfs.rst new file mode 100644 index 000000000..df42106ba --- /dev/null +++ b/Documentation/filesystems/squashfs.rst @@ -0,0 +1,265 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================= +Squashfs 4.0 Filesystem +======================= + +Squashfs is a compressed read-only filesystem for Linux. + +It uses zlib, lz4, lzo, or xz compression to compress files, inodes and +directories. Inodes in the system are very small and all blocks are packed to +minimise data overhead. Block sizes greater than 4K are supported up to a +maximum of 1Mbytes (default block size 128K). + +Squashfs is intended for general read-only filesystem use, for archival +use (i.e. in cases where a .tar.gz file may be used), and in constrained +block device/memory systems (e.g. embedded systems) where low overhead is +needed. + +Mailing list: squashfs-devel@lists.sourceforge.net +Web site: www.squashfs.org + +1. Filesystem Features +---------------------- + +Squashfs filesystem features versus Cramfs: + +============================== ========= ========== + Squashfs Cramfs +============================== ========= ========== +Max filesystem size 2^64 256 MiB +Max file size ~ 2 TiB 16 MiB +Max files unlimited unlimited +Max directories unlimited unlimited +Max entries per directory unlimited unlimited +Max block size 1 MiB 4 KiB +Metadata compression yes no +Directory indexes yes no +Sparse file support yes no +Tail-end packing (fragments) yes no +Exportable (NFS etc.) yes no +Hard link support yes no +"." and ".." in readdir yes no +Real inode numbers yes no +32-bit uids/gids yes no +File creation time yes no +Xattr support yes no +ACL support no no +============================== ========= ========== + +Squashfs compresses data, inodes and directories. In addition, inode and +directory data are highly compacted, and packed on byte boundaries. Each +compressed inode is on average 8 bytes in length (the exact length varies on +file type, i.e. regular file, directory, symbolic link, and block/char device +inodes have different sizes). + +2. Using Squashfs +----------------- + +As squashfs is a read-only filesystem, the mksquashfs program must be used to +create populated squashfs filesystems. This and other squashfs utilities +can be obtained from http://www.squashfs.org. Usage instructions can be +obtained from this site also. + +The squashfs-tools development tree is now located on kernel.org + git://git.kernel.org/pub/scm/fs/squashfs/squashfs-tools.git + +3. Squashfs Filesystem Design +----------------------------- + +A squashfs filesystem consists of a maximum of nine parts, packed together on a +byte alignment:: + + --------------- + | superblock | + |---------------| + | compression | + | options | + |---------------| + | datablocks | + | & fragments | + |---------------| + | inode table | + |---------------| + | directory | + | table | + |---------------| + | fragment | + | table | + |---------------| + | export | + | table | + |---------------| + | uid/gid | + | lookup table | + |---------------| + | xattr | + | table | + --------------- + +Compressed data blocks are written to the filesystem as files are read from +the source directory, and checked for duplicates. Once all file data has been +written the completed inode, directory, fragment, export, uid/gid lookup and +xattr tables are written. + +3.1 Compression options +----------------------- + +Compressors can optionally support compression specific options (e.g. +dictionary size). If non-default compression options have been used, then +these are stored here. + +3.2 Inodes +---------- + +Metadata (inodes and directories) are compressed in 8Kbyte blocks. Each +compressed block is prefixed by a two byte length, the top bit is set if the +block is uncompressed. A block will be uncompressed if the -noI option is set, +or if the compressed block was larger than the uncompressed block. + +Inodes are packed into the metadata blocks, and are not aligned to block +boundaries, therefore inodes overlap compressed blocks. Inodes are identified +by a 48-bit number which encodes the location of the compressed metadata block +containing the inode, and the byte offset into that block where the inode is +placed (<block, offset>). + +To maximise compression there are different inodes for each file type +(regular file, directory, device, etc.), the inode contents and length +varying with the type. + +To further maximise compression, two types of regular file inode and +directory inode are defined: inodes optimised for frequently occurring +regular files and directories, and extended types where extra +information has to be stored. + +3.3 Directories +--------------- + +Like inodes, directories are packed into compressed metadata blocks, stored +in a directory table. Directories are accessed using the start address of +the metablock containing the directory and the offset into the +decompressed block (<block, offset>). + +Directories are organised in a slightly complex way, and are not simply +a list of file names. The organisation takes advantage of the +fact that (in most cases) the inodes of the files will be in the same +compressed metadata block, and therefore, can share the start block. +Directories are therefore organised in a two level list, a directory +header containing the shared start block value, and a sequence of directory +entries, each of which share the shared start block. A new directory header +is written once/if the inode start block changes. The directory +header/directory entry list is repeated as many times as necessary. + +Directories are sorted, and can contain a directory index to speed up +file lookup. Directory indexes store one entry per metablock, each entry +storing the index/filename mapping to the first directory header +in each metadata block. Directories are sorted in alphabetical order, +and at lookup the index is scanned linearly looking for the first filename +alphabetically larger than the filename being looked up. At this point the +location of the metadata block the filename is in has been found. +The general idea of the index is to ensure only one metadata block needs to be +decompressed to do a lookup irrespective of the length of the directory. +This scheme has the advantage that it doesn't require extra memory overhead +and doesn't require much extra storage on disk. + +3.4 File data +------------- + +Regular files consist of a sequence of contiguous compressed blocks, and/or a +compressed fragment block (tail-end packed block). The compressed size +of each datablock is stored in a block list contained within the +file inode. + +To speed up access to datablocks when reading 'large' files (256 Mbytes or +larger), the code implements an index cache that caches the mapping from +block index to datablock location on disk. + +The index cache allows Squashfs to handle large files (up to 1.75 TiB) while +retaining a simple and space-efficient block list on disk. The cache +is split into slots, caching up to eight 224 GiB files (128 KiB blocks). +Larger files use multiple slots, with 1.75 TiB files using all 8 slots. +The index cache is designed to be memory efficient, and by default uses +16 KiB. + +3.5 Fragment lookup table +------------------------- + +Regular files can contain a fragment index which is mapped to a fragment +location on disk and compressed size using a fragment lookup table. This +fragment lookup table is itself stored compressed into metadata blocks. +A second index table is used to locate these. This second index table for +speed of access (and because it is small) is read at mount time and cached +in memory. + +3.6 Uid/gid lookup table +------------------------ + +For space efficiency regular files store uid and gid indexes, which are +converted to 32-bit uids/gids using an id look up table. This table is +stored compressed into metadata blocks. A second index table is used to +locate these. This second index table for speed of access (and because it +is small) is read at mount time and cached in memory. + +3.7 Export table +---------------- + +To enable Squashfs filesystems to be exportable (via NFS etc.) filesystems +can optionally (disabled with the -no-exports Mksquashfs option) contain +an inode number to inode disk location lookup table. This is required to +enable Squashfs to map inode numbers passed in filehandles to the inode +location on disk, which is necessary when the export code reinstantiates +expired/flushed inodes. + +This table is stored compressed into metadata blocks. A second index table is +used to locate these. This second index table for speed of access (and because +it is small) is read at mount time and cached in memory. + +3.8 Xattr table +--------------- + +The xattr table contains extended attributes for each inode. The xattrs +for each inode are stored in a list, each list entry containing a type, +name and value field. The type field encodes the xattr prefix +("user.", "trusted." etc) and it also encodes how the name/value fields +should be interpreted. Currently the type indicates whether the value +is stored inline (in which case the value field contains the xattr value), +or if it is stored out of line (in which case the value field stores a +reference to where the actual value is stored). This allows large values +to be stored out of line improving scanning and lookup performance and it +also allows values to be de-duplicated, the value being stored once, and +all other occurrences holding an out of line reference to that value. + +The xattr lists are packed into compressed 8K metadata blocks. +To reduce overhead in inodes, rather than storing the on-disk +location of the xattr list inside each inode, a 32-bit xattr id +is stored. This xattr id is mapped into the location of the xattr +list using a second xattr id lookup table. + +4. TODOs and Outstanding Issues +------------------------------- + +4.1 TODO list +------------- + +Implement ACL support. + +4.2 Squashfs Internal Cache +--------------------------- + +Blocks in Squashfs are compressed. To avoid repeatedly decompressing +recently accessed data Squashfs uses two small metadata and fragment caches. + +The cache is not used for file datablocks, these are decompressed and cached in +the page-cache in the normal way. The cache is used to temporarily cache +fragment and metadata blocks which have been read as a result of a metadata +(i.e. inode or directory) or fragment access. Because metadata and fragments +are packed together into blocks (to gain greater compression) the read of a +particular piece of metadata or fragment will retrieve other metadata/fragments +which have been packed with it, these because of locality-of-reference may be +read in the near future. Temporarily caching them ensures they are available +for near future access without requiring an additional read and decompress. + +In the future this internal cache may be replaced with an implementation which +uses the kernel page cache. Because the page cache operates on page sized +units this may introduce additional complexity in terms of locking and +associated race conditions. diff --git a/Documentation/filesystems/sysfs.rst b/Documentation/filesystems/sysfs.rst new file mode 100644 index 000000000..004d49017 --- /dev/null +++ b/Documentation/filesystems/sysfs.rst @@ -0,0 +1,415 @@ +.. SPDX-License-Identifier: GPL-2.0 + +===================================================== +sysfs - _The_ filesystem for exporting kernel objects +===================================================== + +Patrick Mochel <mochel@osdl.org> + +Mike Murphy <mamurph@cs.clemson.edu> + +:Revised: 16 August 2011 +:Original: 10 January 2003 + + +What it is: +~~~~~~~~~~~ + +sysfs is a ram-based filesystem initially based on ramfs. It provides +a means to export kernel data structures, their attributes, and the +linkages between them to userspace. + +sysfs is tied inherently to the kobject infrastructure. Please read +Documentation/core-api/kobject.rst for more information concerning the kobject +interface. + + +Using sysfs +~~~~~~~~~~~ + +sysfs is always compiled in if CONFIG_SYSFS is defined. You can access +it by doing:: + + mount -t sysfs sysfs /sys + + +Directory Creation +~~~~~~~~~~~~~~~~~~ + +For every kobject that is registered with the system, a directory is +created for it in sysfs. That directory is created as a subdirectory +of the kobject's parent, expressing internal object hierarchies to +userspace. Top-level directories in sysfs represent the common +ancestors of object hierarchies; i.e. the subsystems the objects +belong to. + +Sysfs internally stores a pointer to the kobject that implements a +directory in the kernfs_node object associated with the directory. In +the past this kobject pointer has been used by sysfs to do reference +counting directly on the kobject whenever the file is opened or closed. +With the current sysfs implementation the kobject reference count is +only modified directly by the function sysfs_schedule_callback(). + + +Attributes +~~~~~~~~~~ + +Attributes can be exported for kobjects in the form of regular files in +the filesystem. Sysfs forwards file I/O operations to methods defined +for the attributes, providing a means to read and write kernel +attributes. + +Attributes should be ASCII text files, preferably with only one value +per file. It is noted that it may not be efficient to contain only one +value per file, so it is socially acceptable to express an array of +values of the same type. + +Mixing types, expressing multiple lines of data, and doing fancy +formatting of data is heavily frowned upon. Doing these things may get +you publicly humiliated and your code rewritten without notice. + + +An attribute definition is simply:: + + struct attribute { + char * name; + struct module *owner; + umode_t mode; + }; + + + int sysfs_create_file(struct kobject * kobj, const struct attribute * attr); + void sysfs_remove_file(struct kobject * kobj, const struct attribute * attr); + + +A bare attribute contains no means to read or write the value of the +attribute. Subsystems are encouraged to define their own attribute +structure and wrapper functions for adding and removing attributes for +a specific object type. + +For example, the driver model defines struct device_attribute like:: + + struct device_attribute { + struct attribute attr; + ssize_t (*show)(struct device *dev, struct device_attribute *attr, + char *buf); + ssize_t (*store)(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count); + }; + + int device_create_file(struct device *, const struct device_attribute *); + void device_remove_file(struct device *, const struct device_attribute *); + +It also defines this helper for defining device attributes:: + + #define DEVICE_ATTR(_name, _mode, _show, _store) \ + struct device_attribute dev_attr_##_name = __ATTR(_name, _mode, _show, _store) + +For example, declaring:: + + static DEVICE_ATTR(foo, S_IWUSR | S_IRUGO, show_foo, store_foo); + +is equivalent to doing:: + + static struct device_attribute dev_attr_foo = { + .attr = { + .name = "foo", + .mode = S_IWUSR | S_IRUGO, + }, + .show = show_foo, + .store = store_foo, + }; + +Note as stated in include/linux/kernel.h "OTHER_WRITABLE? Generally +considered a bad idea." so trying to set a sysfs file writable for +everyone will fail reverting to RO mode for "Others". + +For the common cases sysfs.h provides convenience macros to make +defining attributes easier as well as making code more concise and +readable. The above case could be shortened to: + +static struct device_attribute dev_attr_foo = __ATTR_RW(foo); + +the list of helpers available to define your wrapper function is: + +__ATTR_RO(name): + assumes default name_show and mode 0444 +__ATTR_WO(name): + assumes a name_store only and is restricted to mode + 0200 that is root write access only. +__ATTR_RO_MODE(name, mode): + fore more restrictive RO access currently + only use case is the EFI System Resource Table + (see drivers/firmware/efi/esrt.c) +__ATTR_RW(name): + assumes default name_show, name_store and setting + mode to 0644. +__ATTR_NULL: + which sets the name to NULL and is used as end of list + indicator (see: kernel/workqueue.c) + +Subsystem-Specific Callbacks +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +When a subsystem defines a new attribute type, it must implement a +set of sysfs operations for forwarding read and write calls to the +show and store methods of the attribute owners:: + + struct sysfs_ops { + ssize_t (*show)(struct kobject *, struct attribute *, char *); + ssize_t (*store)(struct kobject *, struct attribute *, const char *, size_t); + }; + +[ Subsystems should have already defined a struct kobj_type as a +descriptor for this type, which is where the sysfs_ops pointer is +stored. See the kobject documentation for more information. ] + +When a file is read or written, sysfs calls the appropriate method +for the type. The method then translates the generic struct kobject +and struct attribute pointers to the appropriate pointer types, and +calls the associated methods. + + +To illustrate:: + + #define to_dev_attr(_attr) container_of(_attr, struct device_attribute, attr) + + static ssize_t dev_attr_show(struct kobject *kobj, struct attribute *attr, + char *buf) + { + struct device_attribute *dev_attr = to_dev_attr(attr); + struct device *dev = kobj_to_dev(kobj); + ssize_t ret = -EIO; + + if (dev_attr->show) + ret = dev_attr->show(dev, dev_attr, buf); + if (ret >= (ssize_t)PAGE_SIZE) { + printk("dev_attr_show: %pS returned bad count\n", + dev_attr->show); + } + return ret; + } + + + +Reading/Writing Attribute Data +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +To read or write attributes, show() or store() methods must be +specified when declaring the attribute. The method types should be as +simple as those defined for device attributes:: + + ssize_t (*show)(struct device *dev, struct device_attribute *attr, char *buf); + ssize_t (*store)(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count); + +IOW, they should take only an object, an attribute, and a buffer as parameters. + + +sysfs allocates a buffer of size (PAGE_SIZE) and passes it to the +method. Sysfs will call the method exactly once for each read or +write. This forces the following behavior on the method +implementations: + +- On read(2), the show() method should fill the entire buffer. + Recall that an attribute should only be exporting one value, or an + array of similar values, so this shouldn't be that expensive. + + This allows userspace to do partial reads and forward seeks + arbitrarily over the entire file at will. If userspace seeks back to + zero or does a pread(2) with an offset of '0' the show() method will + be called again, rearmed, to fill the buffer. + +- On write(2), sysfs expects the entire buffer to be passed during the + first write. Sysfs then passes the entire buffer to the store() method. + A terminating null is added after the data on stores. This makes + functions like sysfs_streq() safe to use. + + When writing sysfs files, userspace processes should first read the + entire file, modify the values it wishes to change, then write the + entire buffer back. + + Attribute method implementations should operate on an identical + buffer when reading and writing values. + +Other notes: + +- Writing causes the show() method to be rearmed regardless of current + file position. + +- The buffer will always be PAGE_SIZE bytes in length. On i386, this + is 4096. + +- show() methods should return the number of bytes printed into the + buffer. + +- show() should only use sysfs_emit() or sysfs_emit_at() when formatting + the value to be returned to user space. + +- store() should return the number of bytes used from the buffer. If the + entire buffer has been used, just return the count argument. + +- show() or store() can always return errors. If a bad value comes + through, be sure to return an error. + +- The object passed to the methods will be pinned in memory via sysfs + referencing counting its embedded object. However, the physical + entity (e.g. device) the object represents may not be present. Be + sure to have a way to check this, if necessary. + + +A very simple (and naive) implementation of a device attribute is:: + + static ssize_t show_name(struct device *dev, struct device_attribute *attr, + char *buf) + { + return scnprintf(buf, PAGE_SIZE, "%s\n", dev->name); + } + + static ssize_t store_name(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) + { + snprintf(dev->name, sizeof(dev->name), "%.*s", + (int)min(count, sizeof(dev->name) - 1), buf); + return count; + } + + static DEVICE_ATTR(name, S_IRUGO, show_name, store_name); + + +(Note that the real implementation doesn't allow userspace to set the +name for a device.) + + +Top Level Directory Layout +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The sysfs directory arrangement exposes the relationship of kernel +data structures. + +The top level sysfs directory looks like:: + + block/ + bus/ + class/ + dev/ + devices/ + firmware/ + net/ + fs/ + +devices/ contains a filesystem representation of the device tree. It maps +directly to the internal kernel device tree, which is a hierarchy of +struct device. + +bus/ contains flat directory layout of the various bus types in the +kernel. Each bus's directory contains two subdirectories:: + + devices/ + drivers/ + +devices/ contains symlinks for each device discovered in the system +that point to the device's directory under root/. + +drivers/ contains a directory for each device driver that is loaded +for devices on that particular bus (this assumes that drivers do not +span multiple bus types). + +fs/ contains a directory for some filesystems. Currently each +filesystem wanting to export attributes must create its own hierarchy +below fs/ (see ./fuse.txt for an example). + +dev/ contains two directories char/ and block/. Inside these two +directories there are symlinks named <major>:<minor>. These symlinks +point to the sysfs directory for the given device. /sys/dev provides a +quick way to lookup the sysfs interface for a device from the result of +a stat(2) operation. + +More information can driver-model specific features can be found in +Documentation/driver-api/driver-model/. + + +TODO: Finish this section. + + +Current Interfaces +~~~~~~~~~~~~~~~~~~ + +The following interface layers currently exist in sysfs: + + +devices (include/linux/device.h) +-------------------------------- +Structure:: + + struct device_attribute { + struct attribute attr; + ssize_t (*show)(struct device *dev, struct device_attribute *attr, + char *buf); + ssize_t (*store)(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count); + }; + +Declaring:: + + DEVICE_ATTR(_name, _mode, _show, _store); + +Creation/Removal:: + + int device_create_file(struct device *dev, const struct device_attribute * attr); + void device_remove_file(struct device *dev, const struct device_attribute * attr); + + +bus drivers (include/linux/device.h) +------------------------------------ +Structure:: + + struct bus_attribute { + struct attribute attr; + ssize_t (*show)(struct bus_type *, char * buf); + ssize_t (*store)(struct bus_type *, const char * buf, size_t count); + }; + +Declaring:: + + static BUS_ATTR_RW(name); + static BUS_ATTR_RO(name); + static BUS_ATTR_WO(name); + +Creation/Removal:: + + int bus_create_file(struct bus_type *, struct bus_attribute *); + void bus_remove_file(struct bus_type *, struct bus_attribute *); + + +device drivers (include/linux/device.h) +--------------------------------------- + +Structure:: + + struct driver_attribute { + struct attribute attr; + ssize_t (*show)(struct device_driver *, char * buf); + ssize_t (*store)(struct device_driver *, const char * buf, + size_t count); + }; + +Declaring:: + + DRIVER_ATTR_RO(_name) + DRIVER_ATTR_RW(_name) + +Creation/Removal:: + + int driver_create_file(struct device_driver *, const struct driver_attribute *); + void driver_remove_file(struct device_driver *, const struct driver_attribute *); + + +Documentation +~~~~~~~~~~~~~ + +The sysfs directory structure and the attributes in each directory define an +ABI between the kernel and user space. As for any ABI, it is important that +this ABI is stable and properly documented. All new sysfs attributes must be +documented in Documentation/ABI. See also Documentation/ABI/README for more +information. diff --git a/Documentation/filesystems/sysv-fs.rst b/Documentation/filesystems/sysv-fs.rst new file mode 100644 index 000000000..89e40911a --- /dev/null +++ b/Documentation/filesystems/sysv-fs.rst @@ -0,0 +1,264 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================== +SystemV Filesystem +================== + +It implements all of + - Xenix FS, + - SystemV/386 FS, + - Coherent FS. + +To install: + +* Answer the 'System V and Coherent filesystem support' question with 'y' + when configuring the kernel. +* To mount a disk or a partition, use:: + + mount [-r] -t sysv device mountpoint + + The file system type names:: + + -t sysv + -t xenix + -t coherent + + may be used interchangeably, but the last two will eventually disappear. + +Bugs in the present implementation: + +- Coherent FS: + + - The "free list interleave" n:m is currently ignored. + - Only file systems with no filesystem name and no pack name are recognized. + (See Coherent "man mkfs" for a description of these features.) + +- SystemV Release 2 FS: + + The superblock is only searched in the blocks 9, 15, 18, which + corresponds to the beginning of track 1 on floppy disks. No support + for this FS on hard disk yet. + + +These filesystems are rather similar. Here is a comparison with Minix FS: + +* Linux fdisk reports on partitions + + - Minix FS 0x81 Linux/Minix + - Xenix FS ?? + - SystemV FS ?? + - Coherent FS 0x08 AIX bootable + +* Size of a block or zone (data allocation unit on disk) + + - Minix FS 1024 + - Xenix FS 1024 (also 512 ??) + - SystemV FS 1024 (also 512 and 2048) + - Coherent FS 512 + +* General layout: all have one boot block, one super block and + separate areas for inodes and for directories/data. + On SystemV Release 2 FS (e.g. Microport) the first track is reserved and + all the block numbers (including the super block) are offset by one track. + +* Byte ordering of "short" (16 bit entities) on disk: + + - Minix FS little endian 0 1 + - Xenix FS little endian 0 1 + - SystemV FS little endian 0 1 + - Coherent FS little endian 0 1 + + Of course, this affects only the file system, not the data of files on it! + +* Byte ordering of "long" (32 bit entities) on disk: + + - Minix FS little endian 0 1 2 3 + - Xenix FS little endian 0 1 2 3 + - SystemV FS little endian 0 1 2 3 + - Coherent FS PDP-11 2 3 0 1 + + Of course, this affects only the file system, not the data of files on it! + +* Inode on disk: "short", 0 means non-existent, the root dir ino is: + + ================================= == + Minix FS 1 + Xenix FS, SystemV FS, Coherent FS 2 + ================================= == + +* Maximum number of hard links to a file: + + =========== ========= + Minix FS 250 + Xenix FS ?? + SystemV FS ?? + Coherent FS >=10000 + =========== ========= + +* Free inode management: + + - Minix FS + a bitmap + - Xenix FS, SystemV FS, Coherent FS + There is a cache of a certain number of free inodes in the super-block. + When it is exhausted, new free inodes are found using a linear search. + +* Free block management: + + - Minix FS + a bitmap + - Xenix FS, SystemV FS, Coherent FS + Free blocks are organized in a "free list". Maybe a misleading term, + since it is not true that every free block contains a pointer to + the next free block. Rather, the free blocks are organized in chunks + of limited size, and every now and then a free block contains pointers + to the free blocks pertaining to the next chunk; the first of these + contains pointers and so on. The list terminates with a "block number" + 0 on Xenix FS and SystemV FS, with a block zeroed out on Coherent FS. + +* Super-block location: + + =========== ========================== + Minix FS block 1 = bytes 1024..2047 + Xenix FS block 1 = bytes 1024..2047 + SystemV FS bytes 512..1023 + Coherent FS block 1 = bytes 512..1023 + =========== ========================== + +* Super-block layout: + + - Minix FS:: + + unsigned short s_ninodes; + unsigned short s_nzones; + unsigned short s_imap_blocks; + unsigned short s_zmap_blocks; + unsigned short s_firstdatazone; + unsigned short s_log_zone_size; + unsigned long s_max_size; + unsigned short s_magic; + + - Xenix FS, SystemV FS, Coherent FS:: + + unsigned short s_firstdatazone; + unsigned long s_nzones; + unsigned short s_fzone_count; + unsigned long s_fzones[NICFREE]; + unsigned short s_finode_count; + unsigned short s_finodes[NICINOD]; + char s_flock; + char s_ilock; + char s_modified; + char s_rdonly; + unsigned long s_time; + short s_dinfo[4]; -- SystemV FS only + unsigned long s_free_zones; + unsigned short s_free_inodes; + short s_dinfo[4]; -- Xenix FS only + unsigned short s_interleave_m,s_interleave_n; -- Coherent FS only + char s_fname[6]; + char s_fpack[6]; + + then they differ considerably: + + Xenix FS:: + + char s_clean; + char s_fill[371]; + long s_magic; + long s_type; + + SystemV FS:: + + long s_fill[12 or 14]; + long s_state; + long s_magic; + long s_type; + + Coherent FS:: + + unsigned long s_unique; + + Note that Coherent FS has no magic. + +* Inode layout: + + - Minix FS:: + + unsigned short i_mode; + unsigned short i_uid; + unsigned long i_size; + unsigned long i_time; + unsigned char i_gid; + unsigned char i_nlinks; + unsigned short i_zone[7+1+1]; + + - Xenix FS, SystemV FS, Coherent FS:: + + unsigned short i_mode; + unsigned short i_nlink; + unsigned short i_uid; + unsigned short i_gid; + unsigned long i_size; + unsigned char i_zone[3*(10+1+1+1)]; + unsigned long i_atime; + unsigned long i_mtime; + unsigned long i_ctime; + + +* Regular file data blocks are organized as + + - Minix FS: + + - 7 direct blocks + - 1 indirect block (pointers to blocks) + - 1 double-indirect block (pointer to pointers to blocks) + + - Xenix FS, SystemV FS, Coherent FS: + + - 10 direct blocks + - 1 indirect block (pointers to blocks) + - 1 double-indirect block (pointer to pointers to blocks) + - 1 triple-indirect block (pointer to pointers to pointers to blocks) + + + =========== ========== ================ + Inode size inodes per block + =========== ========== ================ + Minix FS 32 32 + Xenix FS 64 16 + SystemV FS 64 16 + Coherent FS 64 8 + =========== ========== ================ + +* Directory entry on disk + + - Minix FS:: + + unsigned short inode; + char name[14/30]; + + - Xenix FS, SystemV FS, Coherent FS:: + + unsigned short inode; + char name[14]; + + =========== ============== ===================== + Dir entry size dir entries per block + =========== ============== ===================== + Minix FS 16/32 64/32 + Xenix FS 16 64 + SystemV FS 16 64 + Coherent FS 16 32 + =========== ============== ===================== + +* How to implement symbolic links such that the host fsck doesn't scream: + + - Minix FS normal + - Xenix FS kludge: as regular files with chmod 1000 + - SystemV FS ?? + - Coherent FS kludge: as regular files with chmod 1000 + + +Notation: We often speak of a "block" but mean a zone (the allocation unit) +and not the disk driver's notion of "block". diff --git a/Documentation/filesystems/tmpfs.rst b/Documentation/filesystems/tmpfs.rst new file mode 100644 index 000000000..c44f8b1d3 --- /dev/null +++ b/Documentation/filesystems/tmpfs.rst @@ -0,0 +1,181 @@ +.. SPDX-License-Identifier: GPL-2.0 + +===== +Tmpfs +===== + +Tmpfs is a file system which keeps all files in virtual memory. + + +Everything in tmpfs is temporary in the sense that no files will be +created on your hard drive. If you unmount a tmpfs instance, +everything stored therein is lost. + +tmpfs puts everything into the kernel internal caches and grows and +shrinks to accommodate the files it contains and is able to swap +unneeded pages out to swap space. It has maximum size limits which can +be adjusted on the fly via 'mount -o remount ...' + +If you compare it to ramfs (which was the template to create tmpfs) +you gain swapping and limit checking. Another similar thing is the RAM +disk (/dev/ram*), which simulates a fixed size hard disk in physical +RAM, where you have to create an ordinary filesystem on top. Ramdisks +cannot swap and you do not have the possibility to resize them. + +Since tmpfs lives completely in the page cache and on swap, all tmpfs +pages will be shown as "Shmem" in /proc/meminfo and "Shared" in +free(1). Notice that these counters also include shared memory +(shmem, see ipcs(1)). The most reliable way to get the count is +using df(1) and du(1). + +tmpfs has the following uses: + +1) There is always a kernel internal mount which you will not see at + all. This is used for shared anonymous mappings and SYSV shared + memory. + + This mount does not depend on CONFIG_TMPFS. If CONFIG_TMPFS is not + set, the user visible part of tmpfs is not build. But the internal + mechanisms are always present. + +2) glibc 2.2 and above expects tmpfs to be mounted at /dev/shm for + POSIX shared memory (shm_open, shm_unlink). Adding the following + line to /etc/fstab should take care of this:: + + tmpfs /dev/shm tmpfs defaults 0 0 + + Remember to create the directory that you intend to mount tmpfs on + if necessary. + + This mount is _not_ needed for SYSV shared memory. The internal + mount is used for that. (In the 2.3 kernel versions it was + necessary to mount the predecessor of tmpfs (shm fs) to use SYSV + shared memory) + +3) Some people (including me) find it very convenient to mount it + e.g. on /tmp and /var/tmp and have a big swap partition. And now + loop mounts of tmpfs files do work, so mkinitrd shipped by most + distributions should succeed with a tmpfs /tmp. + +4) And probably a lot more I do not know about :-) + + +tmpfs has three mount options for sizing: + +========= ============================================================ +size The limit of allocated bytes for this tmpfs instance. The + default is half of your physical RAM without swap. If you + oversize your tmpfs instances the machine will deadlock + since the OOM handler will not be able to free that memory. +nr_blocks The same as size, but in blocks of PAGE_SIZE. +nr_inodes The maximum number of inodes for this instance. The default + is half of the number of your physical RAM pages, or (on a + machine with highmem) the number of lowmem RAM pages, + whichever is the lower. +========= ============================================================ + +These parameters accept a suffix k, m or g for kilo, mega and giga and +can be changed on remount. The size parameter also accepts a suffix % +to limit this tmpfs instance to that percentage of your physical RAM: +the default, when neither size nor nr_blocks is specified, is size=50% + +If nr_blocks=0 (or size=0), blocks will not be limited in that instance; +if nr_inodes=0, inodes will not be limited. It is generally unwise to +mount with such options, since it allows any user with write access to +use up all the memory on the machine; but enhances the scalability of +that instance in a system with many cpus making intensive use of it. + + +tmpfs has a mount option to set the NUMA memory allocation policy for +all files in that instance (if CONFIG_NUMA is enabled) - which can be +adjusted on the fly via 'mount -o remount ...' + +======================== ============================================== +mpol=default use the process allocation policy + (see set_mempolicy(2)) +mpol=prefer:Node prefers to allocate memory from the given Node +mpol=bind:NodeList allocates memory only from nodes in NodeList +mpol=interleave prefers to allocate from each node in turn +mpol=interleave:NodeList allocates from each node of NodeList in turn +mpol=local prefers to allocate memory from the local node +======================== ============================================== + +NodeList format is a comma-separated list of decimal numbers and ranges, +a range being two hyphen-separated decimal numbers, the smallest and +largest node numbers in the range. For example, mpol=bind:0-3,5,7,9-15 + +A memory policy with a valid NodeList will be saved, as specified, for +use at file creation time. When a task allocates a file in the file +system, the mount option memory policy will be applied with a NodeList, +if any, modified by the calling task's cpuset constraints +[See Documentation/admin-guide/cgroup-v1/cpusets.rst] and any optional flags, +listed below. If the resulting NodeLists is the empty set, the effective +memory policy for the file will revert to "default" policy. + +NUMA memory allocation policies have optional flags that can be used in +conjunction with their modes. These optional flags can be specified +when tmpfs is mounted by appending them to the mode before the NodeList. +See Documentation/admin-guide/mm/numa_memory_policy.rst for a list of +all available memory allocation policy mode flags and their effect on +memory policy. + +:: + + =static is equivalent to MPOL_F_STATIC_NODES + =relative is equivalent to MPOL_F_RELATIVE_NODES + +For example, mpol=bind=static:NodeList, is the equivalent of an +allocation policy of MPOL_BIND | MPOL_F_STATIC_NODES. + +Note that trying to mount a tmpfs with an mpol option will fail if the +running kernel does not support NUMA; and will fail if its nodelist +specifies a node which is not online. If your system relies on that +tmpfs being mounted, but from time to time runs a kernel built without +NUMA capability (perhaps a safe recovery kernel), or with fewer nodes +online, then it is advisable to omit the mpol option from automatic +mount options. It can be added later, when the tmpfs is already mounted +on MountPoint, by 'mount -o remount,mpol=Policy:NodeList MountPoint'. + + +To specify the initial root directory you can use the following mount +options: + +==== ================================== +mode The permissions as an octal number +uid The user id +gid The group id +==== ================================== + +These options do not have any effect on remount. You can change these +parameters with chmod(1), chown(1) and chgrp(1) on a mounted filesystem. + + +tmpfs has a mount option to select whether it will wrap at 32- or 64-bit inode +numbers: + +======= ======================== +inode64 Use 64-bit inode numbers +inode32 Use 32-bit inode numbers +======= ======================== + +On a 32-bit kernel, inode32 is implicit, and inode64 is refused at mount time. +On a 64-bit kernel, CONFIG_TMPFS_INODE64 sets the default. inode64 avoids the +possibility of multiple files with the same inode number on a single device; +but risks glibc failing with EOVERFLOW once 33-bit inode numbers are reached - +if a long-lived tmpfs is accessed by 32-bit applications so ancient that +opening a file larger than 2GiB fails with EINVAL. + + +So 'mount -t tmpfs -o size=10G,nr_inodes=10k,mode=700 tmpfs /mytmpfs' +will give you tmpfs instance on /mytmpfs which can allocate 10GB +RAM/SWAP in 10240 inodes and it is only accessible by root. + + +:Author: + Christoph Rohland <cr@sap.com>, 1.12.01 +:Updated: + Hugh Dickins, 4 June 2007 +:Updated: + KOSAKI Motohiro, 16 Mar 2010 +:Updated: + Chris Down, 13 July 2020 diff --git a/Documentation/filesystems/ubifs-authentication.rst b/Documentation/filesystems/ubifs-authentication.rst new file mode 100644 index 000000000..5210aed2a --- /dev/null +++ b/Documentation/filesystems/ubifs-authentication.rst @@ -0,0 +1,448 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. UBIFS Authentication +.. sigma star gmbh +.. 2018 + +============================ +UBIFS Authentication Support +============================ + +Introduction +============ + +UBIFS utilizes the fscrypt framework to provide confidentiality for file +contents and file names. This prevents attacks where an attacker is able to +read contents of the filesystem on a single point in time. A classic example +is a lost smartphone where the attacker is unable to read personal data stored +on the device without the filesystem decryption key. + +At the current state, UBIFS encryption however does not prevent attacks where +the attacker is able to modify the filesystem contents and the user uses the +device afterwards. In such a scenario an attacker can modify filesystem +contents arbitrarily without the user noticing. One example is to modify a +binary to perform a malicious action when executed [DMC-CBC-ATTACK]. Since +most of the filesystem metadata of UBIFS is stored in plain, this makes it +fairly easy to swap files and replace their contents. + +Other full disk encryption systems like dm-crypt cover all filesystem metadata, +which makes such kinds of attacks more complicated, but not impossible. +Especially, if the attacker is given access to the device multiple points in +time. For dm-crypt and other filesystems that build upon the Linux block IO +layer, the dm-integrity or dm-verity subsystems [DM-INTEGRITY, DM-VERITY] +can be used to get full data authentication at the block layer. +These can also be combined with dm-crypt [CRYPTSETUP2]. + +This document describes an approach to get file contents _and_ full metadata +authentication for UBIFS. Since UBIFS uses fscrypt for file contents and file +name encryption, the authentication system could be tied into fscrypt such that +existing features like key derivation can be utilized. It should however also +be possible to use UBIFS authentication without using encryption. + + +MTD, UBI & UBIFS +---------------- + +On Linux, the MTD (Memory Technology Devices) subsystem provides a uniform +interface to access raw flash devices. One of the more prominent subsystems that +work on top of MTD is UBI (Unsorted Block Images). It provides volume management +for flash devices and is thus somewhat similar to LVM for block devices. In +addition, it deals with flash-specific wear-leveling and transparent I/O error +handling. UBI offers logical erase blocks (LEBs) to the layers on top of it +and maps them transparently to physical erase blocks (PEBs) on the flash. + +UBIFS is a filesystem for raw flash which operates on top of UBI. Thus, wear +leveling and some flash specifics are left to UBI, while UBIFS focuses on +scalability, performance and recoverability. + +:: + + +------------+ +*******+ +-----------+ +-----+ + | | * UBIFS * | UBI-BLOCK | | ... | + | JFFS/JFFS2 | +*******+ +-----------+ +-----+ + | | +-----------------------------+ +-----------+ +-----+ + | | | UBI | | MTD-BLOCK | | ... | + +------------+ +-----------------------------+ +-----------+ +-----+ + +------------------------------------------------------------------+ + | MEMORY TECHNOLOGY DEVICES (MTD) | + +------------------------------------------------------------------+ + +-----------------------------+ +--------------------------+ +-----+ + | NAND DRIVERS | | NOR DRIVERS | | ... | + +-----------------------------+ +--------------------------+ +-----+ + + Figure 1: Linux kernel subsystems for dealing with raw flash + + + +Internally, UBIFS maintains multiple data structures which are persisted on +the flash: + +- *Index*: an on-flash B+ tree where the leaf nodes contain filesystem data +- *Journal*: an additional data structure to collect FS changes before updating + the on-flash index and reduce flash wear. +- *Tree Node Cache (TNC)*: an in-memory B+ tree that reflects the current FS + state to avoid frequent flash reads. It is basically the in-memory + representation of the index, but contains additional attributes. +- *LEB property tree (LPT)*: an on-flash B+ tree for free space accounting per + UBI LEB. + +In the remainder of this section we will cover the on-flash UBIFS data +structures in more detail. The TNC is of less importance here since it is never +persisted onto the flash directly. More details on UBIFS can also be found in +[UBIFS-WP]. + + +UBIFS Index & Tree Node Cache +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Basic on-flash UBIFS entities are called *nodes*. UBIFS knows different types +of nodes. Eg. data nodes (``struct ubifs_data_node``) which store chunks of file +contents or inode nodes (``struct ubifs_ino_node``) which represent VFS inodes. +Almost all types of nodes share a common header (``ubifs_ch``) containing basic +information like node type, node length, a sequence number, etc. (see +``fs/ubifs/ubifs-media.h`` in kernel source). Exceptions are entries of the LPT +and some less important node types like padding nodes which are used to pad +unusable content at the end of LEBs. + +To avoid re-writing the whole B+ tree on every single change, it is implemented +as *wandering tree*, where only the changed nodes are re-written and previous +versions of them are obsoleted without erasing them right away. As a result, +the index is not stored in a single place on the flash, but *wanders* around +and there are obsolete parts on the flash as long as the LEB containing them is +not reused by UBIFS. To find the most recent version of the index, UBIFS stores +a special node called *master node* into UBI LEB 1 which always points to the +most recent root node of the UBIFS index. For recoverability, the master node +is additionally duplicated to LEB 2. Mounting UBIFS is thus a simple read of +LEB 1 and 2 to get the current master node and from there get the location of +the most recent on-flash index. + +The TNC is the in-memory representation of the on-flash index. It contains some +additional runtime attributes per node which are not persisted. One of these is +a dirty-flag which marks nodes that have to be persisted the next time the +index is written onto the flash. The TNC acts as a write-back cache and all +modifications of the on-flash index are done through the TNC. Like other caches, +the TNC does not have to mirror the full index into memory, but reads parts of +it from flash whenever needed. A *commit* is the UBIFS operation of updating the +on-flash filesystem structures like the index. On every commit, the TNC nodes +marked as dirty are written to the flash to update the persisted index. + + +Journal +~~~~~~~ + +To avoid wearing out the flash, the index is only persisted (*commited*) when +certain conditions are met (eg. ``fsync(2)``). The journal is used to record +any changes (in form of inode nodes, data nodes etc.) between commits +of the index. During mount, the journal is read from the flash and replayed +onto the TNC (which will be created on-demand from the on-flash index). + +UBIFS reserves a bunch of LEBs just for the journal called *log area*. The +amount of log area LEBs is configured on filesystem creation (using +``mkfs.ubifs``) and stored in the superblock node. The log area contains only +two types of nodes: *reference nodes* and *commit start nodes*. A commit start +node is written whenever an index commit is performed. Reference nodes are +written on every journal update. Each reference node points to the position of +other nodes (inode nodes, data nodes etc.) on the flash that are part of this +journal entry. These nodes are called *buds* and describe the actual filesystem +changes including their data. + +The log area is maintained as a ring. Whenever the journal is almost full, +a commit is initiated. This also writes a commit start node so that during +mount, UBIFS will seek for the most recent commit start node and just replay +every reference node after that. Every reference node before the commit start +node will be ignored as they are already part of the on-flash index. + +When writing a journal entry, UBIFS first ensures that enough space is +available to write the reference node and buds part of this entry. Then, the +reference node is written and afterwards the buds describing the file changes. +On replay, UBIFS will record every reference node and inspect the location of +the referenced LEBs to discover the buds. If these are corrupt or missing, +UBIFS will attempt to recover them by re-reading the LEB. This is however only +done for the last referenced LEB of the journal. Only this can become corrupt +because of a power cut. If the recovery fails, UBIFS will not mount. An error +for every other LEB will directly cause UBIFS to fail the mount operation. + +:: + + | ---- LOG AREA ---- | ---------- MAIN AREA ------------ | + + -----+------+-----+--------+---- ------+-----+-----+--------------- + \ | | | | / / | | | \ + / CS | REF | REF | | \ \ DENT | INO | INO | / + \ | | | | / / | | | \ + ----+------+-----+--------+--- -------+-----+-----+---------------- + | | ^ ^ + | | | | + +------------------------+ | + | | + +-------------------------------+ + + + Figure 2: UBIFS flash layout of log area with commit start nodes + (CS) and reference nodes (REF) pointing to main area + containing their buds + + +LEB Property Tree/Table +~~~~~~~~~~~~~~~~~~~~~~~ + +The LEB property tree is used to store per-LEB information. This includes the +LEB type and amount of free and *dirty* (old, obsolete content) space [1]_ on +the LEB. The type is important, because UBIFS never mixes index nodes with data +nodes on a single LEB and thus each LEB has a specific purpose. This again is +useful for free space calculations. See [UBIFS-WP] for more details. + +The LEB property tree again is a B+ tree, but it is much smaller than the +index. Due to its smaller size it is always written as one chunk on every +commit. Thus, saving the LPT is an atomic operation. + + +.. [1] Since LEBs can only be appended and never overwritten, there is a + difference between free space ie. the remaining space left on the LEB to be + written to without erasing it and previously written content that is obsolete + but can't be overwritten without erasing the full LEB. + + +UBIFS Authentication +==================== + +This chapter introduces UBIFS authentication which enables UBIFS to verify +the authenticity and integrity of metadata and file contents stored on flash. + + +Threat Model +------------ + +UBIFS authentication enables detection of offline data modification. While it +does not prevent it, it enables (trusted) code to check the integrity and +authenticity of on-flash file contents and filesystem metadata. This covers +attacks where file contents are swapped. + +UBIFS authentication will not protect against rollback of full flash contents. +Ie. an attacker can still dump the flash and restore it at a later time without +detection. It will also not protect against partial rollback of individual +index commits. That means that an attacker is able to partially undo changes. +This is possible because UBIFS does not immediately overwrites obsolete +versions of the index tree or the journal, but instead marks them as obsolete +and garbage collection erases them at a later time. An attacker can use this by +erasing parts of the current tree and restoring old versions that are still on +the flash and have not yet been erased. This is possible, because every commit +will always write a new version of the index root node and the master node +without overwriting the previous version. This is further helped by the +wear-leveling operations of UBI which copies contents from one physical +eraseblock to another and does not atomically erase the first eraseblock. + +UBIFS authentication does not cover attacks where an attacker is able to +execute code on the device after the authentication key was provided. +Additional measures like secure boot and trusted boot have to be taken to +ensure that only trusted code is executed on a device. + + +Authentication +-------------- + +To be able to fully trust data read from flash, all UBIFS data structures +stored on flash are authenticated. That is: + +- The index which includes file contents, file metadata like extended + attributes, file length etc. +- The journal which also contains file contents and metadata by recording changes + to the filesystem +- The LPT which stores UBI LEB metadata which UBIFS uses for free space accounting + + +Index Authentication +~~~~~~~~~~~~~~~~~~~~ + +Through UBIFS' concept of a wandering tree, it already takes care of only +updating and persisting changed parts from leaf node up to the root node +of the full B+ tree. This enables us to augment the index nodes of the tree +with a hash over each node's child nodes. As a result, the index basically also +a Merkle tree. Since the leaf nodes of the index contain the actual filesystem +data, the hashes of their parent index nodes thus cover all the file contents +and file metadata. When a file changes, the UBIFS index is updated accordingly +from the leaf nodes up to the root node including the master node. This process +can be hooked to recompute the hash only for each changed node at the same time. +Whenever a file is read, UBIFS can verify the hashes from each leaf node up to +the root node to ensure the node's integrity. + +To ensure the authenticity of the whole index, the UBIFS master node stores a +keyed hash (HMAC) over its own contents and a hash of the root node of the index +tree. As mentioned above, the master node is always written to the flash whenever +the index is persisted (ie. on index commit). + +Using this approach only UBIFS index nodes and the master node are changed to +include a hash. All other types of nodes will remain unchanged. This reduces +the storage overhead which is precious for users of UBIFS (ie. embedded +devices). + +:: + + +---------------+ + | Master Node | + | (hash) | + +---------------+ + | + v + +-------------------+ + | Index Node #1 | + | | + | branch0 branchn | + | (hash) (hash) | + +-------------------+ + | ... | (fanout: 8) + | | + +-------+ +------+ + | | + v v + +-------------------+ +-------------------+ + | Index Node #2 | | Index Node #3 | + | | | | + | branch0 branchn | | branch0 branchn | + | (hash) (hash) | | (hash) (hash) | + +-------------------+ +-------------------+ + | ... | ... | + v v v + +-----------+ +----------+ +-----------+ + | Data Node | | INO Node | | DENT Node | + +-----------+ +----------+ +-----------+ + + + Figure 3: Coverage areas of index node hash and master node HMAC + + + +The most important part for robustness and power-cut safety is to atomically +persist the hash and file contents. Here the existing UBIFS logic for how +changed nodes are persisted is already designed for this purpose such that +UBIFS can safely recover if a power-cut occurs while persisting. Adding +hashes to index nodes does not change this since each hash will be persisted +atomically together with its respective node. + + +Journal Authentication +~~~~~~~~~~~~~~~~~~~~~~ + +The journal is authenticated too. Since the journal is continuously written +it is necessary to also add authentication information frequently to the +journal so that in case of a powercut not too much data can't be authenticated. +This is done by creating a continuous hash beginning from the commit start node +over the previous reference nodes, the current reference node, and the bud +nodes. From time to time whenever it is suitable authentication nodes are added +between the bud nodes. This new node type contains a HMAC over the current state +of the hash chain. That way a journal can be authenticated up to the last +authentication node. The tail of the journal which may not have a authentication +node cannot be authenticated and is skipped during journal replay. + +We get this picture for journal authentication:: + + ,,,,,,,, + ,......,........................................... + ,. CS , hash1.----. hash2.----. + ,. | , . |hmac . |hmac + ,. v , . v . v + ,.REF#0,-> bud -> bud -> bud.-> auth -> bud -> bud.-> auth ... + ,..|...,........................................... + , | , + , | ,,,,,,,,,,,,,,, + . | hash3,----. + , | , |hmac + , v , v + , REF#1 -> bud -> bud,-> auth ... + ,,,|,,,,,,,,,,,,,,,,,, + v + REF#2 -> ... + | + V + ... + +Since the hash also includes the reference nodes an attacker cannot reorder or +skip any journal heads for replay. An attacker can only remove bud nodes or +reference nodes from the end of the journal, effectively rewinding the +filesystem at maximum back to the last commit. + +The location of the log area is stored in the master node. Since the master +node is authenticated with a HMAC as described above, it is not possible to +tamper with that without detection. The size of the log area is specified when +the filesystem is created using `mkfs.ubifs` and stored in the superblock node. +To avoid tampering with this and other values stored there, a HMAC is added to +the superblock struct. The superblock node is stored in LEB 0 and is only +modified on feature flag or similar changes, but never on file changes. + + +LPT Authentication +~~~~~~~~~~~~~~~~~~ + +The location of the LPT root node on the flash is stored in the UBIFS master +node. Since the LPT is written and read atomically on every commit, there is +no need to authenticate individual nodes of the tree. It suffices to +protect the integrity of the full LPT by a simple hash stored in the master +node. Since the master node itself is authenticated, the LPTs authenticity can +be verified by verifying the authenticity of the master node and comparing the +LTP hash stored there with the hash computed from the read on-flash LPT. + + +Key Management +-------------- + +For simplicity, UBIFS authentication uses a single key to compute the HMACs +of superblock, master, commit start and reference nodes. This key has to be +available on creation of the filesystem (`mkfs.ubifs`) to authenticate the +superblock node. Further, it has to be available on mount of the filesystem +to verify authenticated nodes and generate new HMACs for changes. + +UBIFS authentication is intended to operate side-by-side with UBIFS encryption +(fscrypt) to provide confidentiality and authenticity. Since UBIFS encryption +has a different approach of encryption policies per directory, there can be +multiple fscrypt master keys and there might be folders without encryption. +UBIFS authentication on the other hand has an all-or-nothing approach in the +sense that it either authenticates everything of the filesystem or nothing. +Because of this and because UBIFS authentication should also be usable without +encryption, it does not share the same master key with fscrypt, but manages +a dedicated authentication key. + +The API for providing the authentication key has yet to be defined, but the +key can eg. be provided by userspace through a keyring similar to the way it +is currently done in fscrypt. It should however be noted that the current +fscrypt approach has shown its flaws and the userspace API will eventually +change [FSCRYPT-POLICY2]. + +Nevertheless, it will be possible for a user to provide a single passphrase +or key in userspace that covers UBIFS authentication and encryption. This can +be solved by the corresponding userspace tools which derive a second key for +authentication in addition to the derived fscrypt master key used for +encryption. + +To be able to check if the proper key is available on mount, the UBIFS +superblock node will additionally store a hash of the authentication key. This +approach is similar to the approach proposed for fscrypt encryption policy v2 +[FSCRYPT-POLICY2]. + + +Future Extensions +================= + +In certain cases where a vendor wants to provide an authenticated filesystem +image to customers, it should be possible to do so without sharing the secret +UBIFS authentication key. Instead, in addition the each HMAC a digital +signature could be stored where the vendor shares the public key alongside the +filesystem image. In case this filesystem has to be modified afterwards, +UBIFS can exchange all digital signatures with HMACs on first mount similar +to the way the IMA/EVM subsystem deals with such situations. The HMAC key +will then have to be provided beforehand in the normal way. + + +References +========== + +[CRYPTSETUP2] https://www.saout.de/pipermail/dm-crypt/2017-November/005745.html + +[DMC-CBC-ATTACK] https://www.jakoblell.com/blog/2013/12/22/practical-malleability-attack-against-cbc-encrypted-luks-partitions/ + +[DM-INTEGRITY] https://www.kernel.org/doc/Documentation/device-mapper/dm-integrity.rst + +[DM-VERITY] https://www.kernel.org/doc/Documentation/device-mapper/verity.rst + +[FSCRYPT-POLICY2] https://www.spinics.net/lists/linux-ext4/msg58710.html + +[UBIFS-WP] http://www.linux-mtd.infradead.org/doc/ubifs_whitepaper.pdf diff --git a/Documentation/filesystems/ubifs.rst b/Documentation/filesystems/ubifs.rst new file mode 100644 index 000000000..e6ee99762 --- /dev/null +++ b/Documentation/filesystems/ubifs.rst @@ -0,0 +1,137 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============== +UBI File System +=============== + +Introduction +============ + +UBIFS file-system stands for UBI File System. UBI stands for "Unsorted +Block Images". UBIFS is a flash file system, which means it is designed +to work with flash devices. It is important to understand, that UBIFS +is completely different to any traditional file-system in Linux, like +Ext2, XFS, JFS, etc. UBIFS represents a separate class of file-systems +which work with MTD devices, not block devices. The other Linux +file-system of this class is JFFS2. + +To make it more clear, here is a small comparison of MTD devices and +block devices. + +1 MTD devices represent flash devices and they consist of eraseblocks of + rather large size, typically about 128KiB. Block devices consist of + small blocks, typically 512 bytes. +2 MTD devices support 3 main operations - read from some offset within an + eraseblock, write to some offset within an eraseblock, and erase a whole + eraseblock. Block devices support 2 main operations - read a whole + block and write a whole block. +3 The whole eraseblock has to be erased before it becomes possible to + re-write its contents. Blocks may be just re-written. +4 Eraseblocks become worn out after some number of erase cycles - + typically 100K-1G for SLC NAND and NOR flashes, and 1K-10K for MLC + NAND flashes. Blocks do not have the wear-out property. +5 Eraseblocks may become bad (only on NAND flashes) and software should + deal with this. Blocks on hard drives typically do not become bad, + because hardware has mechanisms to substitute bad blocks, at least in + modern LBA disks. + +It should be quite obvious why UBIFS is very different to traditional +file-systems. + +UBIFS works on top of UBI. UBI is a separate software layer which may be +found in drivers/mtd/ubi. UBI is basically a volume management and +wear-leveling layer. It provides so called UBI volumes which is a higher +level abstraction than a MTD device. The programming model of UBI devices +is very similar to MTD devices - they still consist of large eraseblocks, +they have read/write/erase operations, but UBI devices are devoid of +limitations like wear and bad blocks (items 4 and 5 in the above list). + +In a sense, UBIFS is a next generation of JFFS2 file-system, but it is +very different and incompatible to JFFS2. The following are the main +differences. + +* JFFS2 works on top of MTD devices, UBIFS depends on UBI and works on + top of UBI volumes. +* JFFS2 does not have on-media index and has to build it while mounting, + which requires full media scan. UBIFS maintains the FS indexing + information on the flash media and does not require full media scan, + so it mounts many times faster than JFFS2. +* JFFS2 is a write-through file-system, while UBIFS supports write-back, + which makes UBIFS much faster on writes. + +Similarly to JFFS2, UBIFS supports on-the-flight compression which makes +it possible to fit quite a lot of data to the flash. + +Similarly to JFFS2, UBIFS is tolerant of unclean reboots and power-cuts. +It does not need stuff like fsck.ext2. UBIFS automatically replays its +journal and recovers from crashes, ensuring that the on-flash data +structures are consistent. + +UBIFS scales logarithmically (most of the data structures it uses are +trees), so the mount time and memory consumption do not linearly depend +on the flash size, like in case of JFFS2. This is because UBIFS +maintains the FS index on the flash media. However, UBIFS depends on +UBI, which scales linearly. So overall UBI/UBIFS stack scales linearly. +Nevertheless, UBI/UBIFS scales considerably better than JFFS2. + +The authors of UBIFS believe, that it is possible to develop UBI2 which +would scale logarithmically as well. UBI2 would support the same API as UBI, +but it would be binary incompatible to UBI. So UBIFS would not need to be +changed to use UBI2 + + +Mount options +============= + +(*) == default. + +==================== ======================================================= +bulk_read read more in one go to take advantage of flash + media that read faster sequentially +no_bulk_read (*) do not bulk-read +no_chk_data_crc (*) skip checking of CRCs on data nodes in order to + improve read performance. Use this option only + if the flash media is highly reliable. The effect + of this option is that corruption of the contents + of a file can go unnoticed. +chk_data_crc do not skip checking CRCs on data nodes +compr=none override default compressor and set it to "none" +compr=lzo override default compressor and set it to "lzo" +compr=zlib override default compressor and set it to "zlib" +auth_key= specify the key used for authenticating the filesystem. + Passing this option makes authentication mandatory. + The passed key must be present in the kernel keyring + and must be of type 'logon' +auth_hash_name= The hash algorithm used for authentication. Used for + both hashing and for creating HMACs. Typical values + include "sha256" or "sha512" +==================== ======================================================= + + +Quick usage instructions +======================== + +The UBI volume to mount is specified using "ubiX_Y" or "ubiX:NAME" syntax, +where "X" is UBI device number, "Y" is UBI volume number, and "NAME" is +UBI volume name. + +Mount volume 0 on UBI device 0 to /mnt/ubifs:: + + $ mount -t ubifs ubi0_0 /mnt/ubifs + +Mount "rootfs" volume of UBI device 0 to /mnt/ubifs ("rootfs" is volume +name):: + + $ mount -t ubifs ubi0:rootfs /mnt/ubifs + +The following is an example of the kernel boot arguments to attach mtd0 +to UBI and mount volume "rootfs": +ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs + +References +========== + +UBIFS documentation and FAQ/HOWTO at the MTD web site: + +- http://www.linux-mtd.infradead.org/doc/ubifs.html +- http://www.linux-mtd.infradead.org/faq/ubifs.html diff --git a/Documentation/filesystems/udf.rst b/Documentation/filesystems/udf.rst new file mode 100644 index 000000000..f9489ddbb --- /dev/null +++ b/Documentation/filesystems/udf.rst @@ -0,0 +1,75 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=============== +UDF file system +=============== + +If you encounter problems with reading UDF discs using this driver, +please report them according to MAINTAINERS file. + +Write support requires a block driver which supports writing. Currently +dvd+rw drives and media support true random sector writes, and so a udf +filesystem on such devices can be directly mounted read/write. CD-RW +media however, does not support this. Instead the media can be formatted +for packet mode using the utility cdrwtool, then the pktcdvd driver can +be bound to the underlying cd device to provide the required buffering +and read-modify-write cycles to allow the filesystem random sector writes +while providing the hardware with only full packet writes. While not +required for dvd+rw media, use of the pktcdvd driver often enhances +performance due to very poor read-modify-write support supplied internally +by drive firmware. + +------------------------------------------------------------------------------- + +The following mount options are supported: + + =========== ====================================== + gid= Set the default group. + umask= Set the default umask. + mode= Set the default file permissions. + dmode= Set the default directory permissions. + uid= Set the default user. + bs= Set the block size. + unhide Show otherwise hidden files. + undelete Show deleted files in lists. + adinicb Embed data in the inode (default) + noadinicb Don't embed data in the inode + shortad Use short ad's + longad Use long ad's (default) + nostrict Unset strict conformance + iocharset= Set the NLS character set + =========== ====================================== + +The uid= and gid= options need a bit more explaining. They will accept a +decimal numeric value and all inodes on that mount will then appear as +belonging to that uid and gid. Mount options also accept the string "forget". +The forget option causes all IDs to be written to disk as -1 which is a way +of UDF standard to indicate that IDs are not supported for these files . + +For typical desktop use of removable media, you should set the ID to that of +the interactively logged on user, and also specify the forget option. This way +the interactive user will always see the files on the disk as belonging to him. + +The remaining are for debugging and disaster recovery: + + ===== ================================ + novrs Skip volume sequence recognition + ===== ================================ + +The following expect a offset from 0. + + ========== ================================================= + session= Set the CDROM session (default= last session) + anchor= Override standard anchor location. (default= 256) + lastblock= Set the last block of the filesystem/ + ========== ================================================= + +------------------------------------------------------------------------------- + + +For the latest version and toolset see: + https://github.com/pali/udftools + +Documentation on UDF and ECMA 167 is available FREE from: + - http://www.osta.org/ + - https://www.ecma-international.org/ diff --git a/Documentation/filesystems/vfat.rst b/Documentation/filesystems/vfat.rst new file mode 100644 index 000000000..e85d74e91 --- /dev/null +++ b/Documentation/filesystems/vfat.rst @@ -0,0 +1,387 @@ +==== +VFAT +==== + +USING VFAT +========== + +To use the vfat filesystem, use the filesystem type 'vfat'. i.e.:: + + mount -t vfat /dev/fd0 /mnt + + +No special partition formatter is required, +'mkdosfs' will work fine if you want to format from within Linux. + +VFAT MOUNT OPTIONS +================== + +**uid=###** + Set the owner of all files on this filesystem. + The default is the uid of current process. + +**gid=###** + Set the group of all files on this filesystem. + The default is the gid of current process. + +**umask=###** + The permission mask (for files and directories, see *umask(1)*). + The default is the umask of current process. + +**dmask=###** + The permission mask for the directory. + The default is the umask of current process. + +**fmask=###** + The permission mask for files. + The default is the umask of current process. + +**allow_utime=###** + This option controls the permission check of mtime/atime. + + **-20**: If current process is in group of file's group ID, + you can change timestamp. + + **-2**: Other users can change timestamp. + + The default is set from dmask option. If the directory is + writable, utime(2) is also allowed. i.e. ~dmask & 022. + + Normally utime(2) checks current process is owner of + the file, or it has CAP_FOWNER capability. But FAT + filesystem doesn't have uid/gid on disk, so normal + check is too unflexible. With this option you can + relax it. + +**codepage=###** + Sets the codepage number for converting to shortname + characters on FAT filesystem. + By default, FAT_DEFAULT_CODEPAGE setting is used. + +**iocharset=<name>** + Character set to use for converting between the + encoding is used for user visible filename and 16 bit + Unicode characters. Long filenames are stored on disk + in Unicode format, but Unix for the most part doesn't + know how to deal with Unicode. + By default, FAT_DEFAULT_IOCHARSET setting is used. + + There is also an option of doing UTF-8 translations + with the utf8 option. + +.. note:: ``iocharset=utf8`` is not recommended. If unsure, you should consider + the utf8 option instead. + +**utf8=<bool>** + UTF-8 is the filesystem safe version of Unicode that + is used by the console. It can be enabled or disabled + for the filesystem with this option. + If 'uni_xlate' gets set, UTF-8 gets disabled. + By default, FAT_DEFAULT_UTF8 setting is used. + +**uni_xlate=<bool>** + Translate unhandled Unicode characters to special + escaped sequences. This would let you backup and + restore filenames that are created with any Unicode + characters. Until Linux supports Unicode for real, + this gives you an alternative. Without this option, + a '?' is used when no translation is possible. The + escape character is ':' because it is otherwise + illegal on the vfat filesystem. The escape sequence + that gets used is ':' and the four digits of hexadecimal + unicode. + +**nonumtail=<bool>** + When creating 8.3 aliases, normally the alias will + end in '~1' or tilde followed by some number. If this + option is set, then if the filename is + "longfilename.txt" and "longfile.txt" does not + currently exist in the directory, longfile.txt will + be the short alias instead of longfi~1.txt. + +**usefree** + Use the "free clusters" value stored on FSINFO. It will + be used to determine number of free clusters without + scanning disk. But it's not used by default, because + recent Windows don't update it correctly in some + case. If you are sure the "free clusters" on FSINFO is + correct, by this option you can avoid scanning disk. + +**quiet** + Stops printing certain warning messages. + +**check=s|r|n** + Case sensitivity checking setting. + + **s**: strict, case sensitive + + **r**: relaxed, case insensitive + + **n**: normal, default setting, currently case insensitive + +**nocase** + This was deprecated for vfat. Use ``shortname=win95`` instead. + +**shortname=lower|win95|winnt|mixed** + Shortname display/create setting. + + **lower**: convert to lowercase for display, + emulate the Windows 95 rule for create. + + **win95**: emulate the Windows 95 rule for display/create. + + **winnt**: emulate the Windows NT rule for display/create. + + **mixed**: emulate the Windows NT rule for display, + emulate the Windows 95 rule for create. + + Default setting is `mixed`. + +**tz=UTC** + Interpret timestamps as UTC rather than local time. + This option disables the conversion of timestamps + between local time (as used by Windows on FAT) and UTC + (which Linux uses internally). This is particularly + useful when mounting devices (like digital cameras) + that are set to UTC in order to avoid the pitfalls of + local time. + +**time_offset=minutes** + Set offset for conversion of timestamps from local time + used by FAT to UTC. I.e. <minutes> minutes will be subtracted + from each timestamp to convert it to UTC used internally by + Linux. This is useful when time zone set in ``sys_tz`` is + not the time zone used by the filesystem. Note that this + option still does not provide correct time stamps in all + cases in presence of DST - time stamps in a different DST + setting will be off by one hour. + +**showexec** + If set, the execute permission bits of the file will be + allowed only if the extension part of the name is .EXE, + .COM, or .BAT. Not set by default. + +**debug** + Can be set, but unused by the current implementation. + +**sys_immutable** + If set, ATTR_SYS attribute on FAT is handled as + IMMUTABLE flag on Linux. Not set by default. + +**flush** + If set, the filesystem will try to flush to disk more + early than normal. Not set by default. + +**rodir** + FAT has the ATTR_RO (read-only) attribute. On Windows, + the ATTR_RO of the directory will just be ignored, + and is used only by applications as a flag (e.g. it's set + for the customized folder). + + If you want to use ATTR_RO as read-only flag even for + the directory, set this option. + +**errors=panic|continue|remount-ro** + specify FAT behavior on critical errors: panic, continue + without doing anything or remount the partition in + read-only mode (default behavior). + +**discard** + If set, issues discard/TRIM commands to the block + device when blocks are freed. This is useful for SSD devices + and sparse/thinly-provisoned LUNs. + +**nfs=stale_rw|nostale_ro** + Enable this only if you want to export the FAT filesystem + over NFS. + + **stale_rw**: This option maintains an index (cache) of directory + *inodes* by *i_logstart* which is used by the nfs-related code to + improve look-ups. Full file operations (read/write) over NFS is + supported but with cache eviction at NFS server, this could + result in ESTALE issues. + + **nostale_ro**: This option bases the *inode* number and filehandle + on the on-disk location of a file in the MS-DOS directory entry. + This ensures that ESTALE will not be returned after a file is + evicted from the inode cache. However, it means that operations + such as rename, create and unlink could cause filehandles that + previously pointed at one file to point at a different file, + potentially causing data corruption. For this reason, this + option also mounts the filesystem readonly. + + To maintain backward compatibility, ``'-o nfs'`` is also accepted, + defaulting to "stale_rw". + +**dos1xfloppy <bool>: 0,1,yes,no,true,false** + If set, use a fallback default BIOS Parameter Block + configuration, determined by backing device size. These static + parameters match defaults assumed by DOS 1.x for 160 kiB, + 180 kiB, 320 kiB, and 360 kiB floppies and floppy images. + + + +LIMITATION +========== + +The fallocated region of file is discarded at umount/evict time +when using fallocate with FALLOC_FL_KEEP_SIZE. +So, User should assume that fallocated region can be discarded at +last close if there is memory pressure resulting in eviction of +the inode from the memory. As a result, for any dependency on +the fallocated region, user should make sure to recheck fallocate +after reopening the file. + +TODO +==== +Need to get rid of the raw scanning stuff. Instead, always use +a get next directory entry approach. The only thing left that uses +raw scanning is the directory renaming code. + + +POSSIBLE PROBLEMS +================= + +- vfat_valid_longname does not properly checked reserved names. +- When a volume name is the same as a directory name in the root + directory of the filesystem, the directory name sometimes shows + up as an empty file. +- autoconv option does not work correctly. + + +TEST SUITE +========== +If you plan to make any modifications to the vfat filesystem, please +get the test suite that comes with the vfat distribution at + +`<http://web.archive.org/web/*/http://bmrc.berkeley.edu/people/chaffee/vfat.html>`_ + +This tests quite a few parts of the vfat filesystem and additional +tests for new features or untested features would be appreciated. + +NOTES ON THE STRUCTURE OF THE VFAT FILESYSTEM +============================================= +This documentation was provided by Galen C. Hunt gchunt@cs.rochester.edu and +lightly annotated by Gordon Chaffee. + +This document presents a very rough, technical overview of my +knowledge of the extended FAT file system used in Windows NT 3.5 and +Windows 95. I don't guarantee that any of the following is correct, +but it appears to be so. + +The extended FAT file system is almost identical to the FAT +file system used in DOS versions up to and including *6.223410239847* +:-). The significant change has been the addition of long file names. +These names support up to 255 characters including spaces and lower +case characters as opposed to the traditional 8.3 short names. + +Here is the description of the traditional FAT entry in the current +Windows 95 filesystem:: + + struct directory { // Short 8.3 names + unsigned char name[8]; // file name + unsigned char ext[3]; // file extension + unsigned char attr; // attribute byte + unsigned char lcase; // Case for base and extension + unsigned char ctime_ms; // Creation time, milliseconds + unsigned char ctime[2]; // Creation time + unsigned char cdate[2]; // Creation date + unsigned char adate[2]; // Last access date + unsigned char reserved[2]; // reserved values (ignored) + unsigned char time[2]; // time stamp + unsigned char date[2]; // date stamp + unsigned char start[2]; // starting cluster number + unsigned char size[4]; // size of the file + }; + + +The lcase field specifies if the base and/or the extension of an 8.3 +name should be capitalized. This field does not seem to be used by +Windows 95 but it is used by Windows NT. The case of filenames is not +completely compatible from Windows NT to Windows 95. It is not completely +compatible in the reverse direction, however. Filenames that fit in +the 8.3 namespace and are written on Windows NT to be lowercase will +show up as uppercase on Windows 95. + +.. note:: Note that the ``start`` and ``size`` values are actually little + endian integer values. The descriptions of the fields in this + structure are public knowledge and can be found elsewhere. + +With the extended FAT system, Microsoft has inserted extra +directory entries for any files with extended names. (Any name which +legally fits within the old 8.3 encoding scheme does not have extra +entries.) I call these extra entries slots. Basically, a slot is a +specially formatted directory entry which holds up to 13 characters of +a file's extended name. Think of slots as additional labeling for the +directory entry of the file to which they correspond. Microsoft +prefers to refer to the 8.3 entry for a file as its alias and the +extended slot directory entries as the file name. + +The C structure for a slot directory entry follows:: + + struct slot { // Up to 13 characters of a long name + unsigned char id; // sequence number for slot + unsigned char name0_4[10]; // first 5 characters in name + unsigned char attr; // attribute byte + unsigned char reserved; // always 0 + unsigned char alias_checksum; // checksum for 8.3 alias + unsigned char name5_10[12]; // 6 more characters in name + unsigned char start[2]; // starting cluster number + unsigned char name11_12[4]; // last 2 characters in name + }; + + +If the layout of the slots looks a little odd, it's only +because of Microsoft's efforts to maintain compatibility with old +software. The slots must be disguised to prevent old software from +panicking. To this end, a number of measures are taken: + + 1) The attribute byte for a slot directory entry is always set + to 0x0f. This corresponds to an old directory entry with + attributes of "hidden", "system", "read-only", and "volume + label". Most old software will ignore any directory + entries with the "volume label" bit set. Real volume label + entries don't have the other three bits set. + + 2) The starting cluster is always set to 0, an impossible + value for a DOS file. + +Because the extended FAT system is backward compatible, it is +possible for old software to modify directory entries. Measures must +be taken to ensure the validity of slots. An extended FAT system can +verify that a slot does in fact belong to an 8.3 directory entry by +the following: + + 1) Positioning. Slots for a file always immediately proceed + their corresponding 8.3 directory entry. In addition, each + slot has an id which marks its order in the extended file + name. Here is a very abbreviated view of an 8.3 directory + entry and its corresponding long name slots for the file + "My Big File.Extension which is long":: + + <proceeding files...> + <slot #3, id = 0x43, characters = "h is long"> + <slot #2, id = 0x02, characters = "xtension whic"> + <slot #1, id = 0x01, characters = "My Big File.E"> + <directory entry, name = "MYBIGFIL.EXT"> + + + .. note:: Note that the slots are stored from last to first. Slots + are numbered from 1 to N. The Nth slot is ``or'ed`` with + 0x40 to mark it as the last one. + + 2) Checksum. Each slot has an alias_checksum value. The + checksum is calculated from the 8.3 name using the + following algorithm:: + + for (sum = i = 0; i < 11; i++) { + sum = (((sum&1)<<7)|((sum&0xfe)>>1)) + name[i] + } + + + 3) If there is free space in the final slot, a Unicode ``NULL (0x0000)`` + is stored after the final character. After that, all unused + characters in the final slot are set to Unicode 0xFFFF. + +Finally, note that the extended name is stored in Unicode. Each Unicode +character takes either two or four bytes, UTF-16LE encoded. diff --git a/Documentation/filesystems/vfs.rst b/Documentation/filesystems/vfs.rst new file mode 100644 index 000000000..f7b69a0e7 --- /dev/null +++ b/Documentation/filesystems/vfs.rst @@ -0,0 +1,1443 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================================= +Overview of the Linux Virtual File System +========================================= + +Original author: Richard Gooch <rgooch@atnf.csiro.au> + +- Copyright (C) 1999 Richard Gooch +- Copyright (C) 2005 Pekka Enberg + + +Introduction +============ + +The Virtual File System (also known as the Virtual Filesystem Switch) is +the software layer in the kernel that provides the filesystem interface +to userspace programs. It also provides an abstraction within the +kernel which allows different filesystem implementations to coexist. + +VFS system calls open(2), stat(2), read(2), write(2), chmod(2) and so on +are called from a process context. Filesystem locking is described in +the document Documentation/filesystems/locking.rst. + + +Directory Entry Cache (dcache) +------------------------------ + +The VFS implements the open(2), stat(2), chmod(2), and similar system +calls. The pathname argument that is passed to them is used by the VFS +to search through the directory entry cache (also known as the dentry +cache or dcache). This provides a very fast look-up mechanism to +translate a pathname (filename) into a specific dentry. Dentries live +in RAM and are never saved to disc: they exist only for performance. + +The dentry cache is meant to be a view into your entire filespace. As +most computers cannot fit all dentries in the RAM at the same time, some +bits of the cache are missing. In order to resolve your pathname into a +dentry, the VFS may have to resort to creating dentries along the way, +and then loading the inode. This is done by looking up the inode. + + +The Inode Object +---------------- + +An individual dentry usually has a pointer to an inode. Inodes are +filesystem objects such as regular files, directories, FIFOs and other +beasts. They live either on the disc (for block device filesystems) or +in the memory (for pseudo filesystems). Inodes that live on the disc +are copied into the memory when required and changes to the inode are +written back to disc. A single inode can be pointed to by multiple +dentries (hard links, for example, do this). + +To look up an inode requires that the VFS calls the lookup() method of +the parent directory inode. This method is installed by the specific +filesystem implementation that the inode lives in. Once the VFS has the +required dentry (and hence the inode), we can do all those boring things +like open(2) the file, or stat(2) it to peek at the inode data. The +stat(2) operation is fairly simple: once the VFS has the dentry, it +peeks at the inode data and passes some of it back to userspace. + + +The File Object +--------------- + +Opening a file requires another operation: allocation of a file +structure (this is the kernel-side implementation of file descriptors). +The freshly allocated file structure is initialized with a pointer to +the dentry and a set of file operation member functions. These are +taken from the inode data. The open() file method is then called so the +specific filesystem implementation can do its work. You can see that +this is another switch performed by the VFS. The file structure is +placed into the file descriptor table for the process. + +Reading, writing and closing files (and other assorted VFS operations) +is done by using the userspace file descriptor to grab the appropriate +file structure, and then calling the required file structure method to +do whatever is required. For as long as the file is open, it keeps the +dentry in use, which in turn means that the VFS inode is still in use. + + +Registering and Mounting a Filesystem +===================================== + +To register and unregister a filesystem, use the following API +functions: + +.. code-block:: c + + #include <linux/fs.h> + + extern int register_filesystem(struct file_system_type *); + extern int unregister_filesystem(struct file_system_type *); + +The passed struct file_system_type describes your filesystem. When a +request is made to mount a filesystem onto a directory in your +namespace, the VFS will call the appropriate mount() method for the +specific filesystem. New vfsmount referring to the tree returned by +->mount() will be attached to the mountpoint, so that when pathname +resolution reaches the mountpoint it will jump into the root of that +vfsmount. + +You can see all filesystems that are registered to the kernel in the +file /proc/filesystems. + + +struct file_system_type +----------------------- + +This describes the filesystem. As of kernel 2.6.39, the following +members are defined: + +.. code-block:: c + + struct file_system_operations { + const char *name; + int fs_flags; + struct dentry *(*mount) (struct file_system_type *, int, + const char *, void *); + void (*kill_sb) (struct super_block *); + struct module *owner; + struct file_system_type * next; + struct list_head fs_supers; + struct lock_class_key s_lock_key; + struct lock_class_key s_umount_key; + }; + +``name`` + the name of the filesystem type, such as "ext2", "iso9660", + "msdos" and so on + +``fs_flags`` + various flags (i.e. FS_REQUIRES_DEV, FS_NO_DCACHE, etc.) + +``mount`` + the method to call when a new instance of this filesystem should + be mounted + +``kill_sb`` + the method to call when an instance of this filesystem should be + shut down + + +``owner`` + for internal VFS use: you should initialize this to THIS_MODULE + in most cases. + +``next`` + for internal VFS use: you should initialize this to NULL + + s_lock_key, s_umount_key: lockdep-specific + +The mount() method has the following arguments: + +``struct file_system_type *fs_type`` + describes the filesystem, partly initialized by the specific + filesystem code + +``int flags`` + mount flags + +``const char *dev_name`` + the device name we are mounting. + +``void *data`` + arbitrary mount options, usually comes as an ASCII string (see + "Mount Options" section) + +The mount() method must return the root dentry of the tree requested by +caller. An active reference to its superblock must be grabbed and the +superblock must be locked. On failure it should return ERR_PTR(error). + +The arguments match those of mount(2) and their interpretation depends +on filesystem type. E.g. for block filesystems, dev_name is interpreted +as block device name, that device is opened and if it contains a +suitable filesystem image the method creates and initializes struct +super_block accordingly, returning its root dentry to caller. + +->mount() may choose to return a subtree of existing filesystem - it +doesn't have to create a new one. The main result from the caller's +point of view is a reference to dentry at the root of (sub)tree to be +attached; creation of new superblock is a common side effect. + +The most interesting member of the superblock structure that the mount() +method fills in is the "s_op" field. This is a pointer to a "struct +super_operations" which describes the next level of the filesystem +implementation. + +Usually, a filesystem uses one of the generic mount() implementations +and provides a fill_super() callback instead. The generic variants are: + +``mount_bdev`` + mount a filesystem residing on a block device + +``mount_nodev`` + mount a filesystem that is not backed by a device + +``mount_single`` + mount a filesystem which shares the instance between all mounts + +A fill_super() callback implementation has the following arguments: + +``struct super_block *sb`` + the superblock structure. The callback must initialize this + properly. + +``void *data`` + arbitrary mount options, usually comes as an ASCII string (see + "Mount Options" section) + +``int silent`` + whether or not to be silent on error + + +The Superblock Object +===================== + +A superblock object represents a mounted filesystem. + + +struct super_operations +----------------------- + +This describes how the VFS can manipulate the superblock of your +filesystem. As of kernel 2.6.22, the following members are defined: + +.. code-block:: c + + struct super_operations { + struct inode *(*alloc_inode)(struct super_block *sb); + void (*destroy_inode)(struct inode *); + + void (*dirty_inode) (struct inode *, int flags); + int (*write_inode) (struct inode *, int); + void (*drop_inode) (struct inode *); + void (*delete_inode) (struct inode *); + void (*put_super) (struct super_block *); + int (*sync_fs)(struct super_block *sb, int wait); + int (*freeze_fs) (struct super_block *); + int (*unfreeze_fs) (struct super_block *); + int (*statfs) (struct dentry *, struct kstatfs *); + int (*remount_fs) (struct super_block *, int *, char *); + void (*clear_inode) (struct inode *); + void (*umount_begin) (struct super_block *); + + int (*show_options)(struct seq_file *, struct dentry *); + + ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t); + ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t); + int (*nr_cached_objects)(struct super_block *); + void (*free_cached_objects)(struct super_block *, int); + }; + +All methods are called without any locks being held, unless otherwise +noted. This means that most methods can block safely. All methods are +only called from a process context (i.e. not from an interrupt handler +or bottom half). + +``alloc_inode`` + this method is called by alloc_inode() to allocate memory for + struct inode and initialize it. If this function is not + defined, a simple 'struct inode' is allocated. Normally + alloc_inode will be used to allocate a larger structure which + contains a 'struct inode' embedded within it. + +``destroy_inode`` + this method is called by destroy_inode() to release resources + allocated for struct inode. It is only required if + ->alloc_inode was defined and simply undoes anything done by + ->alloc_inode. + +``dirty_inode`` + this method is called by the VFS to mark an inode dirty. + +``write_inode`` + this method is called when the VFS needs to write an inode to + disc. The second parameter indicates whether the write should + be synchronous or not, not all filesystems check this flag. + +``drop_inode`` + called when the last access to the inode is dropped, with the + inode->i_lock spinlock held. + + This method should be either NULL (normal UNIX filesystem + semantics) or "generic_delete_inode" (for filesystems that do + not want to cache inodes - causing "delete_inode" to always be + called regardless of the value of i_nlink) + + The "generic_delete_inode()" behavior is equivalent to the old + practice of using "force_delete" in the put_inode() case, but + does not have the races that the "force_delete()" approach had. + +``delete_inode`` + called when the VFS wants to delete an inode + +``put_super`` + called when the VFS wishes to free the superblock + (i.e. unmount). This is called with the superblock lock held + +``sync_fs`` + called when VFS is writing out all dirty data associated with a + superblock. The second parameter indicates whether the method + should wait until the write out has been completed. Optional. + +``freeze_fs`` + called when VFS is locking a filesystem and forcing it into a + consistent state. This method is currently used by the Logical + Volume Manager (LVM). + +``unfreeze_fs`` + called when VFS is unlocking a filesystem and making it writable + again. + +``statfs`` + called when the VFS needs to get filesystem statistics. + +``remount_fs`` + called when the filesystem is remounted. This is called with + the kernel lock held + +``clear_inode`` + called then the VFS clears the inode. Optional + +``umount_begin`` + called when the VFS is unmounting a filesystem. + +``show_options`` + called by the VFS to show mount options for /proc/<pid>/mounts. + (see "Mount Options" section) + +``quota_read`` + called by the VFS to read from filesystem quota file. + +``quota_write`` + called by the VFS to write to filesystem quota file. + +``nr_cached_objects`` + called by the sb cache shrinking function for the filesystem to + return the number of freeable cached objects it contains. + Optional. + +``free_cache_objects`` + called by the sb cache shrinking function for the filesystem to + scan the number of objects indicated to try to free them. + Optional, but any filesystem implementing this method needs to + also implement ->nr_cached_objects for it to be called + correctly. + + We can't do anything with any errors that the filesystem might + encountered, hence the void return type. This will never be + called if the VM is trying to reclaim under GFP_NOFS conditions, + hence this method does not need to handle that situation itself. + + Implementations must include conditional reschedule calls inside + any scanning loop that is done. This allows the VFS to + determine appropriate scan batch sizes without having to worry + about whether implementations will cause holdoff problems due to + large scan batch sizes. + +Whoever sets up the inode is responsible for filling in the "i_op" +field. This is a pointer to a "struct inode_operations" which describes +the methods that can be performed on individual inodes. + + +struct xattr_handlers +--------------------- + +On filesystems that support extended attributes (xattrs), the s_xattr +superblock field points to a NULL-terminated array of xattr handlers. +Extended attributes are name:value pairs. + +``name`` + Indicates that the handler matches attributes with the specified + name (such as "system.posix_acl_access"); the prefix field must + be NULL. + +``prefix`` + Indicates that the handler matches all attributes with the + specified name prefix (such as "user."); the name field must be + NULL. + +``list`` + Determine if attributes matching this xattr handler should be + listed for a particular dentry. Used by some listxattr + implementations like generic_listxattr. + +``get`` + Called by the VFS to get the value of a particular extended + attribute. This method is called by the getxattr(2) system + call. + +``set`` + Called by the VFS to set the value of a particular extended + attribute. When the new value is NULL, called to remove a + particular extended attribute. This method is called by the + setxattr(2) and removexattr(2) system calls. + +When none of the xattr handlers of a filesystem match the specified +attribute name or when a filesystem doesn't support extended attributes, +the various ``*xattr(2)`` system calls return -EOPNOTSUPP. + + +The Inode Object +================ + +An inode object represents an object within the filesystem. + + +struct inode_operations +----------------------- + +This describes how the VFS can manipulate an inode in your filesystem. +As of kernel 2.6.22, the following members are defined: + +.. code-block:: c + + struct inode_operations { + int (*create) (struct inode *,struct dentry *, umode_t, bool); + struct dentry * (*lookup) (struct inode *,struct dentry *, unsigned int); + int (*link) (struct dentry *,struct inode *,struct dentry *); + int (*unlink) (struct inode *,struct dentry *); + int (*symlink) (struct inode *,struct dentry *,const char *); + int (*mkdir) (struct inode *,struct dentry *,umode_t); + int (*rmdir) (struct inode *,struct dentry *); + int (*mknod) (struct inode *,struct dentry *,umode_t,dev_t); + int (*rename) (struct inode *, struct dentry *, + struct inode *, struct dentry *, unsigned int); + int (*readlink) (struct dentry *, char __user *,int); + const char *(*get_link) (struct dentry *, struct inode *, + struct delayed_call *); + int (*permission) (struct inode *, int); + int (*get_acl)(struct inode *, int); + int (*setattr) (struct dentry *, struct iattr *); + int (*getattr) (const struct path *, struct kstat *, u32, unsigned int); + ssize_t (*listxattr) (struct dentry *, char *, size_t); + void (*update_time)(struct inode *, struct timespec *, int); + int (*atomic_open)(struct inode *, struct dentry *, struct file *, + unsigned open_flag, umode_t create_mode); + int (*tmpfile) (struct inode *, struct dentry *, umode_t); + }; + +Again, all methods are called without any locks being held, unless +otherwise noted. + +``create`` + called by the open(2) and creat(2) system calls. Only required + if you want to support regular files. The dentry you get should + not have an inode (i.e. it should be a negative dentry). Here + you will probably call d_instantiate() with the dentry and the + newly created inode + +``lookup`` + called when the VFS needs to look up an inode in a parent + directory. The name to look for is found in the dentry. This + method must call d_add() to insert the found inode into the + dentry. The "i_count" field in the inode structure should be + incremented. If the named inode does not exist a NULL inode + should be inserted into the dentry (this is called a negative + dentry). Returning an error code from this routine must only be + done on a real error, otherwise creating inodes with system + calls like create(2), mknod(2), mkdir(2) and so on will fail. + If you wish to overload the dentry methods then you should + initialise the "d_dop" field in the dentry; this is a pointer to + a struct "dentry_operations". This method is called with the + directory inode semaphore held + +``link`` + called by the link(2) system call. Only required if you want to + support hard links. You will probably need to call + d_instantiate() just as you would in the create() method + +``unlink`` + called by the unlink(2) system call. Only required if you want + to support deleting inodes + +``symlink`` + called by the symlink(2) system call. Only required if you want + to support symlinks. You will probably need to call + d_instantiate() just as you would in the create() method + +``mkdir`` + called by the mkdir(2) system call. Only required if you want + to support creating subdirectories. You will probably need to + call d_instantiate() just as you would in the create() method + +``rmdir`` + called by the rmdir(2) system call. Only required if you want + to support deleting subdirectories + +``mknod`` + called by the mknod(2) system call to create a device (char, + block) inode or a named pipe (FIFO) or socket. Only required if + you want to support creating these types of inodes. You will + probably need to call d_instantiate() just as you would in the + create() method + +``rename`` + called by the rename(2) system call to rename the object to have + the parent and name given by the second inode and dentry. + + The filesystem must return -EINVAL for any unsupported or + unknown flags. Currently the following flags are implemented: + (1) RENAME_NOREPLACE: this flag indicates that if the target of + the rename exists the rename should fail with -EEXIST instead of + replacing the target. The VFS already checks for existence, so + for local filesystems the RENAME_NOREPLACE implementation is + equivalent to plain rename. + (2) RENAME_EXCHANGE: exchange source and target. Both must + exist; this is checked by the VFS. Unlike plain rename, source + and target may be of different type. + +``get_link`` + called by the VFS to follow a symbolic link to the inode it + points to. Only required if you want to support symbolic links. + This method returns the symlink body to traverse (and possibly + resets the current position with nd_jump_link()). If the body + won't go away until the inode is gone, nothing else is needed; + if it needs to be otherwise pinned, arrange for its release by + having get_link(..., ..., done) do set_delayed_call(done, + destructor, argument). In that case destructor(argument) will + be called once VFS is done with the body you've returned. May + be called in RCU mode; that is indicated by NULL dentry + argument. If request can't be handled without leaving RCU mode, + have it return ERR_PTR(-ECHILD). + + If the filesystem stores the symlink target in ->i_link, the + VFS may use it directly without calling ->get_link(); however, + ->get_link() must still be provided. ->i_link must not be + freed until after an RCU grace period. Writing to ->i_link + post-iget() time requires a 'release' memory barrier. + +``readlink`` + this is now just an override for use by readlink(2) for the + cases when ->get_link uses nd_jump_link() or object is not in + fact a symlink. Normally filesystems should only implement + ->get_link for symlinks and readlink(2) will automatically use + that. + +``permission`` + called by the VFS to check for access rights on a POSIX-like + filesystem. + + May be called in rcu-walk mode (mask & MAY_NOT_BLOCK). If in + rcu-walk mode, the filesystem must check the permission without + blocking or storing to the inode. + + If a situation is encountered that rcu-walk cannot handle, + return + -ECHILD and it will be called again in ref-walk mode. + +``setattr`` + called by the VFS to set attributes for a file. This method is + called by chmod(2) and related system calls. + +``getattr`` + called by the VFS to get attributes of a file. This method is + called by stat(2) and related system calls. + +``listxattr`` + called by the VFS to list all extended attributes for a given + file. This method is called by the listxattr(2) system call. + +``update_time`` + called by the VFS to update a specific time or the i_version of + an inode. If this is not defined the VFS will update the inode + itself and call mark_inode_dirty_sync. + +``atomic_open`` + called on the last component of an open. Using this optional + method the filesystem can look up, possibly create and open the + file in one atomic operation. If it wants to leave actual + opening to the caller (e.g. if the file turned out to be a + symlink, device, or just something filesystem won't do atomic + open for), it may signal this by returning finish_no_open(file, + dentry). This method is only called if the last component is + negative or needs lookup. Cached positive dentries are still + handled by f_op->open(). If the file was created, FMODE_CREATED + flag should be set in file->f_mode. In case of O_EXCL the + method must only succeed if the file didn't exist and hence + FMODE_CREATED shall always be set on success. + +``tmpfile`` + called in the end of O_TMPFILE open(). Optional, equivalent to + atomically creating, opening and unlinking a file in given + directory. + + +The Address Space Object +======================== + +The address space object is used to group and manage pages in the page +cache. It can be used to keep track of the pages in a file (or anything +else) and also track the mapping of sections of the file into process +address spaces. + +There are a number of distinct yet related services that an +address-space can provide. These include communicating memory pressure, +page lookup by address, and keeping track of pages tagged as Dirty or +Writeback. + +The first can be used independently to the others. The VM can try to +either write dirty pages in order to clean them, or release clean pages +in order to reuse them. To do this it can call the ->writepage method +on dirty pages, and ->releasepage on clean pages with PagePrivate set. +Clean pages without PagePrivate and with no external references will be +released without notice being given to the address_space. + +To achieve this functionality, pages need to be placed on an LRU with +lru_cache_add and mark_page_active needs to be called whenever the page +is used. + +Pages are normally kept in a radix tree index by ->index. This tree +maintains information about the PG_Dirty and PG_Writeback status of each +page, so that pages with either of these flags can be found quickly. + +The Dirty tag is primarily used by mpage_writepages - the default +->writepages method. It uses the tag to find dirty pages to call +->writepage on. If mpage_writepages is not used (i.e. the address +provides its own ->writepages) , the PAGECACHE_TAG_DIRTY tag is almost +unused. write_inode_now and sync_inode do use it (through +__sync_single_inode) to check if ->writepages has been successful in +writing out the whole address_space. + +The Writeback tag is used by filemap*wait* and sync_page* functions, via +filemap_fdatawait_range, to wait for all writeback to complete. + +An address_space handler may attach extra information to a page, +typically using the 'private' field in the 'struct page'. If such +information is attached, the PG_Private flag should be set. This will +cause various VM routines to make extra calls into the address_space +handler to deal with that data. + +An address space acts as an intermediate between storage and +application. Data is read into the address space a whole page at a +time, and provided to the application either by copying of the page, or +by memory-mapping the page. Data is written into the address space by +the application, and then written-back to storage typically in whole +pages, however the address_space has finer control of write sizes. + +The read process essentially only requires 'readpage'. The write +process is more complicated and uses write_begin/write_end or +set_page_dirty to write data into the address_space, and writepage and +writepages to writeback data to storage. + +Adding and removing pages to/from an address_space is protected by the +inode's i_mutex. + +When data is written to a page, the PG_Dirty flag should be set. It +typically remains set until writepage asks for it to be written. This +should clear PG_Dirty and set PG_Writeback. It can be actually written +at any point after PG_Dirty is clear. Once it is known to be safe, +PG_Writeback is cleared. + +Writeback makes use of a writeback_control structure to direct the +operations. This gives the writepage and writepages operations some +information about the nature of and reason for the writeback request, +and the constraints under which it is being done. It is also used to +return information back to the caller about the result of a writepage or +writepages request. + + +Handling errors during writeback +-------------------------------- + +Most applications that do buffered I/O will periodically call a file +synchronization call (fsync, fdatasync, msync or sync_file_range) to +ensure that data written has made it to the backing store. When there +is an error during writeback, they expect that error to be reported when +a file sync request is made. After an error has been reported on one +request, subsequent requests on the same file descriptor should return +0, unless further writeback errors have occurred since the previous file +syncronization. + +Ideally, the kernel would report errors only on file descriptions on +which writes were done that subsequently failed to be written back. The +generic pagecache infrastructure does not track the file descriptions +that have dirtied each individual page however, so determining which +file descriptors should get back an error is not possible. + +Instead, the generic writeback error tracking infrastructure in the +kernel settles for reporting errors to fsync on all file descriptions +that were open at the time that the error occurred. In a situation with +multiple writers, all of them will get back an error on a subsequent +fsync, even if all of the writes done through that particular file +descriptor succeeded (or even if there were no writes on that file +descriptor at all). + +Filesystems that wish to use this infrastructure should call +mapping_set_error to record the error in the address_space when it +occurs. Then, after writing back data from the pagecache in their +file->fsync operation, they should call file_check_and_advance_wb_err to +ensure that the struct file's error cursor has advanced to the correct +point in the stream of errors emitted by the backing device(s). + + +struct address_space_operations +------------------------------- + +This describes how the VFS can manipulate mapping of a file to page +cache in your filesystem. The following members are defined: + +.. code-block:: c + + struct address_space_operations { + int (*writepage)(struct page *page, struct writeback_control *wbc); + int (*readpage)(struct file *, struct page *); + int (*writepages)(struct address_space *, struct writeback_control *); + int (*set_page_dirty)(struct page *page); + void (*readahead)(struct readahead_control *); + int (*readpages)(struct file *filp, struct address_space *mapping, + struct list_head *pages, unsigned nr_pages); + int (*write_begin)(struct file *, struct address_space *mapping, + loff_t pos, unsigned len, unsigned flags, + struct page **pagep, void **fsdata); + int (*write_end)(struct file *, struct address_space *mapping, + loff_t pos, unsigned len, unsigned copied, + struct page *page, void *fsdata); + sector_t (*bmap)(struct address_space *, sector_t); + void (*invalidatepage) (struct page *, unsigned int, unsigned int); + int (*releasepage) (struct page *, int); + void (*freepage)(struct page *); + ssize_t (*direct_IO)(struct kiocb *, struct iov_iter *iter); + /* isolate a page for migration */ + bool (*isolate_page) (struct page *, isolate_mode_t); + /* migrate the contents of a page to the specified target */ + int (*migratepage) (struct page *, struct page *); + /* put migration-failed page back to right list */ + void (*putback_page) (struct page *); + int (*launder_page) (struct page *); + + int (*is_partially_uptodate) (struct page *, unsigned long, + unsigned long); + void (*is_dirty_writeback) (struct page *, bool *, bool *); + int (*error_remove_page) (struct mapping *mapping, struct page *page); + int (*swap_activate)(struct file *); + int (*swap_deactivate)(struct file *); + }; + +``writepage`` + called by the VM to write a dirty page to backing store. This + may happen for data integrity reasons (i.e. 'sync'), or to free + up memory (flush). The difference can be seen in + wbc->sync_mode. The PG_Dirty flag has been cleared and + PageLocked is true. writepage should start writeout, should set + PG_Writeback, and should make sure the page is unlocked, either + synchronously or asynchronously when the write operation + completes. + + If wbc->sync_mode is WB_SYNC_NONE, ->writepage doesn't have to + try too hard if there are problems, and may choose to write out + other pages from the mapping if that is easier (e.g. due to + internal dependencies). If it chooses not to start writeout, it + should return AOP_WRITEPAGE_ACTIVATE so that the VM will not + keep calling ->writepage on that page. + + See the file "Locking" for more details. + +``readpage`` + called by the VM to read a page from backing store. The page + will be Locked when readpage is called, and should be unlocked + and marked uptodate once the read completes. If ->readpage + discovers that it needs to unlock the page for some reason, it + can do so, and then return AOP_TRUNCATED_PAGE. In this case, + the page will be relocated, relocked and if that all succeeds, + ->readpage will be called again. + +``writepages`` + called by the VM to write out pages associated with the + address_space object. If wbc->sync_mode is WB_SYNC_ALL, then + the writeback_control will specify a range of pages that must be + written out. If it is WB_SYNC_NONE, then a nr_to_write is + given and that many pages should be written if possible. If no + ->writepages is given, then mpage_writepages is used instead. + This will choose pages from the address space that are tagged as + DIRTY and will pass them to ->writepage. + +``set_page_dirty`` + called by the VM to set a page dirty. This is particularly + needed if an address space attaches private data to a page, and + that data needs to be updated when a page is dirtied. This is + called, for example, when a memory mapped page gets modified. + If defined, it should set the PageDirty flag, and the + PAGECACHE_TAG_DIRTY tag in the radix tree. + +``readahead`` + Called by the VM to read pages associated with the address_space + object. The pages are consecutive in the page cache and are + locked. The implementation should decrement the page refcount + after starting I/O on each page. Usually the page will be + unlocked by the I/O completion handler. If the filesystem decides + to stop attempting I/O before reaching the end of the readahead + window, it can simply return. The caller will decrement the page + refcount and unlock the remaining pages for you. Set PageUptodate + if the I/O completes successfully. Setting PageError on any page + will be ignored; simply unlock the page if an I/O error occurs. + +``readpages`` + called by the VM to read pages associated with the address_space + object. This is essentially just a vector version of readpage. + Instead of just one page, several pages are requested. + readpages is only used for read-ahead, so read errors are + ignored. If anything goes wrong, feel free to give up. + This interface is deprecated and will be removed by the end of + 2020; implement readahead instead. + +``write_begin`` + Called by the generic buffered write code to ask the filesystem + to prepare to write len bytes at the given offset in the file. + The address_space should check that the write will be able to + complete, by allocating space if necessary and doing any other + internal housekeeping. If the write will update parts of any + basic-blocks on storage, then those blocks should be pre-read + (if they haven't been read already) so that the updated blocks + can be written out properly. + + The filesystem must return the locked pagecache page for the + specified offset, in ``*pagep``, for the caller to write into. + + It must be able to cope with short writes (where the length + passed to write_begin is greater than the number of bytes copied + into the page). + + flags is a field for AOP_FLAG_xxx flags, described in + include/linux/fs.h. + + A void * may be returned in fsdata, which then gets passed into + write_end. + + Returns 0 on success; < 0 on failure (which is the error code), + in which case write_end is not called. + +``write_end`` + After a successful write_begin, and data copy, write_end must be + called. len is the original len passed to write_begin, and + copied is the amount that was able to be copied. + + The filesystem must take care of unlocking the page and + releasing it refcount, and updating i_size. + + Returns < 0 on failure, otherwise the number of bytes (<= + 'copied') that were able to be copied into pagecache. + +``bmap`` + called by the VFS to map a logical block offset within object to + physical block number. This method is used by the FIBMAP ioctl + and for working with swap-files. To be able to swap to a file, + the file must have a stable mapping to a block device. The swap + system does not go through the filesystem but instead uses bmap + to find out where the blocks in the file are and uses those + addresses directly. + +``invalidatepage`` + If a page has PagePrivate set, then invalidatepage will be + called when part or all of the page is to be removed from the + address space. This generally corresponds to either a + truncation, punch hole or a complete invalidation of the address + space (in the latter case 'offset' will always be 0 and 'length' + will be PAGE_SIZE). Any private data associated with the page + should be updated to reflect this truncation. If offset is 0 + and length is PAGE_SIZE, then the private data should be + released, because the page must be able to be completely + discarded. This may be done by calling the ->releasepage + function, but in this case the release MUST succeed. + +``releasepage`` + releasepage is called on PagePrivate pages to indicate that the + page should be freed if possible. ->releasepage should remove + any private data from the page and clear the PagePrivate flag. + If releasepage() fails for some reason, it must indicate failure + with a 0 return value. releasepage() is used in two distinct + though related cases. The first is when the VM finds a clean + page with no active users and wants to make it a free page. If + ->releasepage succeeds, the page will be removed from the + address_space and become free. + + The second case is when a request has been made to invalidate + some or all pages in an address_space. This can happen through + the fadvise(POSIX_FADV_DONTNEED) system call or by the + filesystem explicitly requesting it as nfs and 9fs do (when they + believe the cache may be out of date with storage) by calling + invalidate_inode_pages2(). If the filesystem makes such a call, + and needs to be certain that all pages are invalidated, then its + releasepage will need to ensure this. Possibly it can clear the + PageUptodate bit if it cannot free private data yet. + +``freepage`` + freepage is called once the page is no longer visible in the + page cache in order to allow the cleanup of any private data. + Since it may be called by the memory reclaimer, it should not + assume that the original address_space mapping still exists, and + it should not block. + +``direct_IO`` + called by the generic read/write routines to perform direct_IO - + that is IO requests which bypass the page cache and transfer + data directly between the storage and the application's address + space. + +``isolate_page`` + Called by the VM when isolating a movable non-lru page. If page + is successfully isolated, VM marks the page as PG_isolated via + __SetPageIsolated. + +``migrate_page`` + This is used to compact the physical memory usage. If the VM + wants to relocate a page (maybe off a memory card that is + signalling imminent failure) it will pass a new page and an old + page to this function. migrate_page should transfer any private + data across and update any references that it has to the page. + +``putback_page`` + Called by the VM when isolated page's migration fails. + +``launder_page`` + Called before freeing a page - it writes back the dirty page. + To prevent redirtying the page, it is kept locked during the + whole operation. + +``is_partially_uptodate`` + Called by the VM when reading a file through the pagecache when + the underlying blocksize != pagesize. If the required block is + up to date then the read can complete without needing the IO to + bring the whole page up to date. + +``is_dirty_writeback`` + Called by the VM when attempting to reclaim a page. The VM uses + dirty and writeback information to determine if it needs to + stall to allow flushers a chance to complete some IO. + Ordinarily it can use PageDirty and PageWriteback but some + filesystems have more complex state (unstable pages in NFS + prevent reclaim) or do not set those flags due to locking + problems. This callback allows a filesystem to indicate to the + VM if a page should be treated as dirty or writeback for the + purposes of stalling. + +``error_remove_page`` + normally set to generic_error_remove_page if truncation is ok + for this address space. Used for memory failure handling. + Setting this implies you deal with pages going away under you, + unless you have them locked or reference counts increased. + +``swap_activate`` + Called when swapon is used on a file to allocate space if + necessary and pin the block lookup information in memory. A + return value of zero indicates success, in which case this file + can be used to back swapspace. + +``swap_deactivate`` + Called during swapoff on files where swap_activate was + successful. + + +The File Object +=============== + +A file object represents a file opened by a process. This is also known +as an "open file description" in POSIX parlance. + + +struct file_operations +---------------------- + +This describes how the VFS can manipulate an open file. As of kernel +4.18, the following members are defined: + +.. code-block:: c + + struct file_operations { + struct module *owner; + loff_t (*llseek) (struct file *, loff_t, int); + ssize_t (*read) (struct file *, char __user *, size_t, loff_t *); + ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *); + ssize_t (*read_iter) (struct kiocb *, struct iov_iter *); + ssize_t (*write_iter) (struct kiocb *, struct iov_iter *); + int (*iopoll)(struct kiocb *kiocb, bool spin); + int (*iterate) (struct file *, struct dir_context *); + int (*iterate_shared) (struct file *, struct dir_context *); + __poll_t (*poll) (struct file *, struct poll_table_struct *); + long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long); + long (*compat_ioctl) (struct file *, unsigned int, unsigned long); + int (*mmap) (struct file *, struct vm_area_struct *); + int (*open) (struct inode *, struct file *); + int (*flush) (struct file *, fl_owner_t id); + int (*release) (struct inode *, struct file *); + int (*fsync) (struct file *, loff_t, loff_t, int datasync); + int (*fasync) (int, struct file *, int); + int (*lock) (struct file *, int, struct file_lock *); + ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int); + unsigned long (*get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long); + int (*check_flags)(int); + int (*flock) (struct file *, int, struct file_lock *); + ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, loff_t *, size_t, unsigned int); + ssize_t (*splice_read)(struct file *, loff_t *, struct pipe_inode_info *, size_t, unsigned int); + int (*setlease)(struct file *, long, struct file_lock **, void **); + long (*fallocate)(struct file *file, int mode, loff_t offset, + loff_t len); + void (*show_fdinfo)(struct seq_file *m, struct file *f); + #ifndef CONFIG_MMU + unsigned (*mmap_capabilities)(struct file *); + #endif + ssize_t (*copy_file_range)(struct file *, loff_t, struct file *, loff_t, size_t, unsigned int); + loff_t (*remap_file_range)(struct file *file_in, loff_t pos_in, + struct file *file_out, loff_t pos_out, + loff_t len, unsigned int remap_flags); + int (*fadvise)(struct file *, loff_t, loff_t, int); + }; + +Again, all methods are called without any locks being held, unless +otherwise noted. + +``llseek`` + called when the VFS needs to move the file position index + +``read`` + called by read(2) and related system calls + +``read_iter`` + possibly asynchronous read with iov_iter as destination + +``write`` + called by write(2) and related system calls + +``write_iter`` + possibly asynchronous write with iov_iter as source + +``iopoll`` + called when aio wants to poll for completions on HIPRI iocbs + +``iterate`` + called when the VFS needs to read the directory contents + +``iterate_shared`` + called when the VFS needs to read the directory contents when + filesystem supports concurrent dir iterators + +``poll`` + called by the VFS when a process wants to check if there is + activity on this file and (optionally) go to sleep until there + is activity. Called by the select(2) and poll(2) system calls + +``unlocked_ioctl`` + called by the ioctl(2) system call. + +``compat_ioctl`` + called by the ioctl(2) system call when 32 bit system calls are + used on 64 bit kernels. + +``mmap`` + called by the mmap(2) system call + +``open`` + called by the VFS when an inode should be opened. When the VFS + opens a file, it creates a new "struct file". It then calls the + open method for the newly allocated file structure. You might + think that the open method really belongs in "struct + inode_operations", and you may be right. I think it's done the + way it is because it makes filesystems simpler to implement. + The open() method is a good place to initialize the + "private_data" member in the file structure if you want to point + to a device structure + +``flush`` + called by the close(2) system call to flush a file + +``release`` + called when the last reference to an open file is closed + +``fsync`` + called by the fsync(2) system call. Also see the section above + entitled "Handling errors during writeback". + +``fasync`` + called by the fcntl(2) system call when asynchronous + (non-blocking) mode is enabled for a file + +``lock`` + called by the fcntl(2) system call for F_GETLK, F_SETLK, and + F_SETLKW commands + +``get_unmapped_area`` + called by the mmap(2) system call + +``check_flags`` + called by the fcntl(2) system call for F_SETFL command + +``flock`` + called by the flock(2) system call + +``splice_write`` + called by the VFS to splice data from a pipe to a file. This + method is used by the splice(2) system call + +``splice_read`` + called by the VFS to splice data from file to a pipe. This + method is used by the splice(2) system call + +``setlease`` + called by the VFS to set or release a file lock lease. setlease + implementations should call generic_setlease to record or remove + the lease in the inode after setting it. + +``fallocate`` + called by the VFS to preallocate blocks or punch a hole. + +``copy_file_range`` + called by the copy_file_range(2) system call. + +``remap_file_range`` + called by the ioctl(2) system call for FICLONERANGE and FICLONE + and FIDEDUPERANGE commands to remap file ranges. An + implementation should remap len bytes at pos_in of the source + file into the dest file at pos_out. Implementations must handle + callers passing in len == 0; this means "remap to the end of the + source file". The return value should the number of bytes + remapped, or the usual negative error code if errors occurred + before any bytes were remapped. The remap_flags parameter + accepts REMAP_FILE_* flags. If REMAP_FILE_DEDUP is set then the + implementation must only remap if the requested file ranges have + identical contents. If REMAP_FILE_CAN_SHORTEN is set, the caller is + ok with the implementation shortening the request length to + satisfy alignment or EOF requirements (or any other reason). + +``fadvise`` + possibly called by the fadvise64() system call. + +Note that the file operations are implemented by the specific +filesystem in which the inode resides. When opening a device node +(character or block special) most filesystems will call special +support routines in the VFS which will locate the required device +driver information. These support routines replace the filesystem file +operations with those for the device driver, and then proceed to call +the new open() method for the file. This is how opening a device file +in the filesystem eventually ends up calling the device driver open() +method. + + +Directory Entry Cache (dcache) +============================== + + +struct dentry_operations +------------------------ + +This describes how a filesystem can overload the standard dentry +operations. Dentries and the dcache are the domain of the VFS and the +individual filesystem implementations. Device drivers have no business +here. These methods may be set to NULL, as they are either optional or +the VFS uses a default. As of kernel 2.6.22, the following members are +defined: + +.. code-block:: c + + struct dentry_operations { + int (*d_revalidate)(struct dentry *, unsigned int); + int (*d_weak_revalidate)(struct dentry *, unsigned int); + int (*d_hash)(const struct dentry *, struct qstr *); + int (*d_compare)(const struct dentry *, + unsigned int, const char *, const struct qstr *); + int (*d_delete)(const struct dentry *); + int (*d_init)(struct dentry *); + void (*d_release)(struct dentry *); + void (*d_iput)(struct dentry *, struct inode *); + char *(*d_dname)(struct dentry *, char *, int); + struct vfsmount *(*d_automount)(struct path *); + int (*d_manage)(const struct path *, bool); + struct dentry *(*d_real)(struct dentry *, const struct inode *); + }; + +``d_revalidate`` + called when the VFS needs to revalidate a dentry. This is + called whenever a name look-up finds a dentry in the dcache. + Most local filesystems leave this as NULL, because all their + dentries in the dcache are valid. Network filesystems are + different since things can change on the server without the + client necessarily being aware of it. + + This function should return a positive value if the dentry is + still valid, and zero or a negative error code if it isn't. + + d_revalidate may be called in rcu-walk mode (flags & + LOOKUP_RCU). If in rcu-walk mode, the filesystem must + revalidate the dentry without blocking or storing to the dentry, + d_parent and d_inode should not be used without care (because + they can change and, in d_inode case, even become NULL under + us). + + If a situation is encountered that rcu-walk cannot handle, + return + -ECHILD and it will be called again in ref-walk mode. + +``d_weak_revalidate`` + called when the VFS needs to revalidate a "jumped" dentry. This + is called when a path-walk ends at dentry that was not acquired + by doing a lookup in the parent directory. This includes "/", + "." and "..", as well as procfs-style symlinks and mountpoint + traversal. + + In this case, we are less concerned with whether the dentry is + still fully correct, but rather that the inode is still valid. + As with d_revalidate, most local filesystems will set this to + NULL since their dcache entries are always valid. + + This function has the same return code semantics as + d_revalidate. + + d_weak_revalidate is only called after leaving rcu-walk mode. + +``d_hash`` + called when the VFS adds a dentry to the hash table. The first + dentry passed to d_hash is the parent directory that the name is + to be hashed into. + + Same locking and synchronisation rules as d_compare regarding + what is safe to dereference etc. + +``d_compare`` + called to compare a dentry name with a given name. The first + dentry is the parent of the dentry to be compared, the second is + the child dentry. len and name string are properties of the + dentry to be compared. qstr is the name to compare it with. + + Must be constant and idempotent, and should not take locks if + possible, and should not or store into the dentry. Should not + dereference pointers outside the dentry without lots of care + (eg. d_parent, d_inode, d_name should not be used). + + However, our vfsmount is pinned, and RCU held, so the dentries + and inodes won't disappear, neither will our sb or filesystem + module. ->d_sb may be used. + + It is a tricky calling convention because it needs to be called + under "rcu-walk", ie. without any locks or references on things. + +``d_delete`` + called when the last reference to a dentry is dropped and the + dcache is deciding whether or not to cache it. Return 1 to + delete immediately, or 0 to cache the dentry. Default is NULL + which means to always cache a reachable dentry. d_delete must + be constant and idempotent. + +``d_init`` + called when a dentry is allocated + +``d_release`` + called when a dentry is really deallocated + +``d_iput`` + called when a dentry loses its inode (just prior to its being + deallocated). The default when this is NULL is that the VFS + calls iput(). If you define this method, you must call iput() + yourself + +``d_dname`` + called when the pathname of a dentry should be generated. + Useful for some pseudo filesystems (sockfs, pipefs, ...) to + delay pathname generation. (Instead of doing it when dentry is + created, it's done only when the path is needed.). Real + filesystems probably dont want to use it, because their dentries + are present in global dcache hash, so their hash should be an + invariant. As no lock is held, d_dname() should not try to + modify the dentry itself, unless appropriate SMP safety is used. + CAUTION : d_path() logic is quite tricky. The correct way to + return for example "Hello" is to put it at the end of the + buffer, and returns a pointer to the first char. + dynamic_dname() helper function is provided to take care of + this. + + Example : + +.. code-block:: c + + static char *pipefs_dname(struct dentry *dent, char *buffer, int buflen) + { + return dynamic_dname(dentry, buffer, buflen, "pipe:[%lu]", + dentry->d_inode->i_ino); + } + +``d_automount`` + called when an automount dentry is to be traversed (optional). + This should create a new VFS mount record and return the record + to the caller. The caller is supplied with a path parameter + giving the automount directory to describe the automount target + and the parent VFS mount record to provide inheritable mount + parameters. NULL should be returned if someone else managed to + make the automount first. If the vfsmount creation failed, then + an error code should be returned. If -EISDIR is returned, then + the directory will be treated as an ordinary directory and + returned to pathwalk to continue walking. + + If a vfsmount is returned, the caller will attempt to mount it + on the mountpoint and will remove the vfsmount from its + expiration list in the case of failure. The vfsmount should be + returned with 2 refs on it to prevent automatic expiration - the + caller will clean up the additional ref. + + This function is only used if DCACHE_NEED_AUTOMOUNT is set on + the dentry. This is set by __d_instantiate() if S_AUTOMOUNT is + set on the inode being added. + +``d_manage`` + called to allow the filesystem to manage the transition from a + dentry (optional). This allows autofs, for example, to hold up + clients waiting to explore behind a 'mountpoint' while letting + the daemon go past and construct the subtree there. 0 should be + returned to let the calling process continue. -EISDIR can be + returned to tell pathwalk to use this directory as an ordinary + directory and to ignore anything mounted on it and not to check + the automount flag. Any other error code will abort pathwalk + completely. + + If the 'rcu_walk' parameter is true, then the caller is doing a + pathwalk in RCU-walk mode. Sleeping is not permitted in this + mode, and the caller can be asked to leave it and call again by + returning -ECHILD. -EISDIR may also be returned to tell + pathwalk to ignore d_automount or any mounts. + + This function is only used if DCACHE_MANAGE_TRANSIT is set on + the dentry being transited from. + +``d_real`` + overlay/union type filesystems implement this method to return + one of the underlying dentries hidden by the overlay. It is + used in two different modes: + + Called from file_dentry() it returns the real dentry matching + the inode argument. The real dentry may be from a lower layer + already copied up, but still referenced from the file. This + mode is selected with a non-NULL inode argument. + + With NULL inode the topmost real underlying dentry is returned. + +Each dentry has a pointer to its parent dentry, as well as a hash list +of child dentries. Child dentries are basically like files in a +directory. + + +Directory Entry Cache API +-------------------------- + +There are a number of functions defined which permit a filesystem to +manipulate dentries: + +``dget`` + open a new handle for an existing dentry (this just increments + the usage count) + +``dput`` + close a handle for a dentry (decrements the usage count). If + the usage count drops to 0, and the dentry is still in its + parent's hash, the "d_delete" method is called to check whether + it should be cached. If it should not be cached, or if the + dentry is not hashed, it is deleted. Otherwise cached dentries + are put into an LRU list to be reclaimed on memory shortage. + +``d_drop`` + this unhashes a dentry from its parents hash list. A subsequent + call to dput() will deallocate the dentry if its usage count + drops to 0 + +``d_delete`` + delete a dentry. If there are no other open references to the + dentry then the dentry is turned into a negative dentry (the + d_iput() method is called). If there are other references, then + d_drop() is called instead + +``d_add`` + add a dentry to its parents hash list and then calls + d_instantiate() + +``d_instantiate`` + add a dentry to the alias hash list for the inode and updates + the "d_inode" member. The "i_count" member in the inode + structure should be set/incremented. If the inode pointer is + NULL, the dentry is called a "negative dentry". This function + is commonly called when an inode is created for an existing + negative dentry + +``d_lookup`` + look up a dentry given its parent and path name component It + looks up the child of that given name from the dcache hash + table. If it is found, the reference count is incremented and + the dentry is returned. The caller must use dput() to free the + dentry when it finishes using it. + + +Mount Options +============= + + +Parsing options +--------------- + +On mount and remount the filesystem is passed a string containing a +comma separated list of mount options. The options can have either of +these forms: + + option + option=value + +The <linux/parser.h> header defines an API that helps parse these +options. There are plenty of examples on how to use it in existing +filesystems. + + +Showing options +--------------- + +If a filesystem accepts mount options, it must define show_options() to +show all the currently active options. The rules are: + + - options MUST be shown which are not default or their values differ + from the default + + - options MAY be shown which are enabled by default or have their + default value + +Options used only internally between a mount helper and the kernel (such +as file descriptors), or which only have an effect during the mounting +(such as ones controlling the creation of a journal) are exempt from the +above rules. + +The underlying reason for the above rules is to make sure, that a mount +can be accurately replicated (e.g. umounting and mounting again) based +on the information found in /proc/mounts. + + +Resources +========= + +(Note some of these resources are not up-to-date with the latest kernel + version.) + +Creating Linux virtual filesystems. 2002 + <https://lwn.net/Articles/13325/> + +The Linux Virtual File-system Layer by Neil Brown. 1999 + <http://www.cse.unsw.edu.au/~neilb/oss/linux-commentary/vfs.html> + +A tour of the Linux VFS by Michael K. Johnson. 1996 + <https://www.tldp.org/LDP/khg/HyperNews/get/fs/vfstour.html> + +A small trail through the Linux kernel by Andries Brouwer. 2001 + <https://www.win.tue.nl/~aeb/linux/vfs/trail.html> diff --git a/Documentation/filesystems/virtiofs.rst b/Documentation/filesystems/virtiofs.rst new file mode 100644 index 000000000..fd4d2484e --- /dev/null +++ b/Documentation/filesystems/virtiofs.rst @@ -0,0 +1,76 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _virtiofs_index: + +=================================================== +virtiofs: virtio-fs host<->guest shared file system +=================================================== + +- Copyright (C) 2019 Red Hat, Inc. + +Introduction +============ +The virtiofs file system for Linux implements a driver for the paravirtualized +VIRTIO "virtio-fs" device for guest<->host file system sharing. It allows a +guest to mount a directory that has been exported on the host. + +Guests often require access to files residing on the host or remote systems. +Use cases include making files available to new guests during installation, +booting from a root file system located on the host, persistent storage for +stateless or ephemeral guests, and sharing a directory between guests. + +Although it is possible to use existing network file systems for some of these +tasks, they require configuration steps that are hard to automate and they +expose the storage network to the guest. The virtio-fs device was designed to +solve these problems by providing file system access without networking. + +Furthermore the virtio-fs device takes advantage of the co-location of the +guest and host to increase performance and provide semantics that are not +possible with network file systems. + +Usage +===== +Mount file system with tag ``myfs`` on ``/mnt``: + +.. code-block:: sh + + guest# mount -t virtiofs myfs /mnt + +Please see https://virtio-fs.gitlab.io/ for details on how to configure QEMU +and the virtiofsd daemon. + +Mount options +------------- + +virtiofs supports general VFS mount options, for example, remount, +ro, rw, context, etc. It also supports FUSE mount options. + +atime behavior +^^^^^^^^^^^^^^ + +The atime-related mount options, for example, noatime, strictatime, +are ignored. The atime behavior for virtiofs is the same as the +underlying filesystem of the directory that has been exported +on the host. + +Internals +========= +Since the virtio-fs device uses the FUSE protocol for file system requests, the +virtiofs file system for Linux is integrated closely with the FUSE file system +client. The guest acts as the FUSE client while the host acts as the FUSE +server. The /dev/fuse interface between the kernel and userspace is replaced +with the virtio-fs device interface. + +FUSE requests are placed into a virtqueue and processed by the host. The +response portion of the buffer is filled in by the host and the guest handles +the request completion. + +Mapping /dev/fuse to virtqueues requires solving differences in semantics +between /dev/fuse and virtqueues. Each time the /dev/fuse device is read, the +FUSE client may choose which request to transfer, making it possible to +prioritize certain requests over others. Virtqueues have queue semantics and +it is not possible to change the order of requests that have been enqueued. +This is especially important if the virtqueue becomes full since it is then +impossible to add high priority requests. In order to address this difference, +the virtio-fs device uses a "hiprio" virtqueue specifically for requests that +have priority over normal requests. diff --git a/Documentation/filesystems/xfs-delayed-logging-design.rst b/Documentation/filesystems/xfs-delayed-logging-design.rst new file mode 100644 index 000000000..464405d28 --- /dev/null +++ b/Documentation/filesystems/xfs-delayed-logging-design.rst @@ -0,0 +1,804 @@ +.. SPDX-License-Identifier: GPL-2.0 + +========================== +XFS Delayed Logging Design +========================== + +Introduction to Re-logging in XFS +================================= + +XFS logging is a combination of logical and physical logging. Some objects, +such as inodes and dquots, are logged in logical format where the details +logged are made up of the changes to in-core structures rather than on-disk +structures. Other objects - typically buffers - have their physical changes +logged. The reason for these differences is to reduce the amount of log space +required for objects that are frequently logged. Some parts of inodes are more +frequently logged than others, and inodes are typically more frequently logged +than any other object (except maybe the superblock buffer) so keeping the +amount of metadata logged low is of prime importance. + +The reason that this is such a concern is that XFS allows multiple separate +modifications to a single object to be carried in the log at any given time. +This allows the log to avoid needing to flush each change to disk before +recording a new change to the object. XFS does this via a method called +"re-logging". Conceptually, this is quite simple - all it requires is that any +new change to the object is recorded with a *new copy* of all the existing +changes in the new transaction that is written to the log. + +That is, if we have a sequence of changes A through to F, and the object was +written to disk after change D, we would see in the log the following series +of transactions, their contents and the log sequence number (LSN) of the +transaction:: + + Transaction Contents LSN + A A X + B A+B X+n + C A+B+C X+n+m + D A+B+C+D X+n+m+o + <object written to disk> + E E Y (> X+n+m+o) + F E+F Y+p + +In other words, each time an object is relogged, the new transaction contains +the aggregation of all the previous changes currently held only in the log. + +This relogging technique also allows objects to be moved forward in the log so +that an object being relogged does not prevent the tail of the log from ever +moving forward. This can be seen in the table above by the changing +(increasing) LSN of each subsequent transaction - the LSN is effectively a +direct encoding of the location in the log of the transaction. + +This relogging is also used to implement long-running, multiple-commit +transactions. These transaction are known as rolling transactions, and require +a special log reservation known as a permanent transaction reservation. A +typical example of a rolling transaction is the removal of extents from an +inode which can only be done at a rate of two extents per transaction because +of reservation size limitations. Hence a rolling extent removal transaction +keeps relogging the inode and btree buffers as they get modified in each +removal operation. This keeps them moving forward in the log as the operation +progresses, ensuring that current operation never gets blocked by itself if the +log wraps around. + +Hence it can be seen that the relogging operation is fundamental to the correct +working of the XFS journalling subsystem. From the above description, most +people should be able to see why the XFS metadata operations writes so much to +the log - repeated operations to the same objects write the same changes to +the log over and over again. Worse is the fact that objects tend to get +dirtier as they get relogged, so each subsequent transaction is writing more +metadata into the log. + +Another feature of the XFS transaction subsystem is that most transactions are +asynchronous. That is, they don't commit to disk until either a log buffer is +filled (a log buffer can hold multiple transactions) or a synchronous operation +forces the log buffers holding the transactions to disk. This means that XFS is +doing aggregation of transactions in memory - batching them, if you like - to +minimise the impact of the log IO on transaction throughput. + +The limitation on asynchronous transaction throughput is the number and size of +log buffers made available by the log manager. By default there are 8 log +buffers available and the size of each is 32kB - the size can be increased up +to 256kB by use of a mount option. + +Effectively, this gives us the maximum bound of outstanding metadata changes +that can be made to the filesystem at any point in time - if all the log +buffers are full and under IO, then no more transactions can be committed until +the current batch completes. It is now common for a single current CPU core to +be to able to issue enough transactions to keep the log buffers full and under +IO permanently. Hence the XFS journalling subsystem can be considered to be IO +bound. + +Delayed Logging: Concepts +========================= + +The key thing to note about the asynchronous logging combined with the +relogging technique XFS uses is that we can be relogging changed objects +multiple times before they are committed to disk in the log buffers. If we +return to the previous relogging example, it is entirely possible that +transactions A through D are committed to disk in the same log buffer. + +That is, a single log buffer may contain multiple copies of the same object, +but only one of those copies needs to be there - the last one "D", as it +contains all the changes from the previous changes. In other words, we have one +necessary copy in the log buffer, and three stale copies that are simply +wasting space. When we are doing repeated operations on the same set of +objects, these "stale objects" can be over 90% of the space used in the log +buffers. It is clear that reducing the number of stale objects written to the +log would greatly reduce the amount of metadata we write to the log, and this +is the fundamental goal of delayed logging. + +From a conceptual point of view, XFS is already doing relogging in memory (where +memory == log buffer), only it is doing it extremely inefficiently. It is using +logical to physical formatting to do the relogging because there is no +infrastructure to keep track of logical changes in memory prior to physically +formatting the changes in a transaction to the log buffer. Hence we cannot avoid +accumulating stale objects in the log buffers. + +Delayed logging is the name we've given to keeping and tracking transactional +changes to objects in memory outside the log buffer infrastructure. Because of +the relogging concept fundamental to the XFS journalling subsystem, this is +actually relatively easy to do - all the changes to logged items are already +tracked in the current infrastructure. The big problem is how to accumulate +them and get them to the log in a consistent, recoverable manner. +Describing the problems and how they have been solved is the focus of this +document. + +One of the key changes that delayed logging makes to the operation of the +journalling subsystem is that it disassociates the amount of outstanding +metadata changes from the size and number of log buffers available. In other +words, instead of there only being a maximum of 2MB of transaction changes not +written to the log at any point in time, there may be a much greater amount +being accumulated in memory. Hence the potential for loss of metadata on a +crash is much greater than for the existing logging mechanism. + +It should be noted that this does not change the guarantee that log recovery +will result in a consistent filesystem. What it does mean is that as far as the +recovered filesystem is concerned, there may be many thousands of transactions +that simply did not occur as a result of the crash. This makes it even more +important that applications that care about their data use fsync() where they +need to ensure application level data integrity is maintained. + +It should be noted that delayed logging is not an innovative new concept that +warrants rigorous proofs to determine whether it is correct or not. The method +of accumulating changes in memory for some period before writing them to the +log is used effectively in many filesystems including ext3 and ext4. Hence +no time is spent in this document trying to convince the reader that the +concept is sound. Instead it is simply considered a "solved problem" and as +such implementing it in XFS is purely an exercise in software engineering. + +The fundamental requirements for delayed logging in XFS are simple: + + 1. Reduce the amount of metadata written to the log by at least + an order of magnitude. + 2. Supply sufficient statistics to validate Requirement #1. + 3. Supply sufficient new tracing infrastructure to be able to debug + problems with the new code. + 4. No on-disk format change (metadata or log format). + 5. Enable and disable with a mount option. + 6. No performance regressions for synchronous transaction workloads. + +Delayed Logging: Design +======================= + +Storing Changes +--------------- + +The problem with accumulating changes at a logical level (i.e. just using the +existing log item dirty region tracking) is that when it comes to writing the +changes to the log buffers, we need to ensure that the object we are formatting +is not changing while we do this. This requires locking the object to prevent +concurrent modification. Hence flushing the logical changes to the log would +require us to lock every object, format them, and then unlock them again. + +This introduces lots of scope for deadlocks with transactions that are already +running. For example, a transaction has object A locked and modified, but needs +the delayed logging tracking lock to commit the transaction. However, the +flushing thread has the delayed logging tracking lock already held, and is +trying to get the lock on object A to flush it to the log buffer. This appears +to be an unsolvable deadlock condition, and it was solving this problem that +was the barrier to implementing delayed logging for so long. + +The solution is relatively simple - it just took a long time to recognise it. +Put simply, the current logging code formats the changes to each item into an +vector array that points to the changed regions in the item. The log write code +simply copies the memory these vectors point to into the log buffer during +transaction commit while the item is locked in the transaction. Instead of +using the log buffer as the destination of the formatting code, we can use an +allocated memory buffer big enough to fit the formatted vector. + +If we then copy the vector into the memory buffer and rewrite the vector to +point to the memory buffer rather than the object itself, we now have a copy of +the changes in a format that is compatible with the log buffer writing code. +that does not require us to lock the item to access. This formatting and +rewriting can all be done while the object is locked during transaction commit, +resulting in a vector that is transactionally consistent and can be accessed +without needing to lock the owning item. + +Hence we avoid the need to lock items when we need to flush outstanding +asynchronous transactions to the log. The differences between the existing +formatting method and the delayed logging formatting can be seen in the +diagram below. + +Current format log vector:: + + Object +---------------------------------------------+ + Vector 1 +----+ + Vector 2 +----+ + Vector 3 +----------+ + +After formatting:: + + Log Buffer +-V1-+-V2-+----V3----+ + +Delayed logging vector:: + + Object +---------------------------------------------+ + Vector 1 +----+ + Vector 2 +----+ + Vector 3 +----------+ + +After formatting:: + + Memory Buffer +-V1-+-V2-+----V3----+ + Vector 1 +----+ + Vector 2 +----+ + Vector 3 +----------+ + +The memory buffer and associated vector need to be passed as a single object, +but still need to be associated with the parent object so if the object is +relogged we can replace the current memory buffer with a new memory buffer that +contains the latest changes. + +The reason for keeping the vector around after we've formatted the memory +buffer is to support splitting vectors across log buffer boundaries correctly. +If we don't keep the vector around, we do not know where the region boundaries +are in the item, so we'd need a new encapsulation method for regions in the log +buffer writing (i.e. double encapsulation). This would be an on-disk format +change and as such is not desirable. It also means we'd have to write the log +region headers in the formatting stage, which is problematic as there is per +region state that needs to be placed into the headers during the log write. + +Hence we need to keep the vector, but by attaching the memory buffer to it and +rewriting the vector addresses to point at the memory buffer we end up with a +self-describing object that can be passed to the log buffer write code to be +handled in exactly the same manner as the existing log vectors are handled. +Hence we avoid needing a new on-disk format to handle items that have been +relogged in memory. + + +Tracking Changes +---------------- + +Now that we can record transactional changes in memory in a form that allows +them to be used without limitations, we need to be able to track and accumulate +them so that they can be written to the log at some later point in time. The +log item is the natural place to store this vector and buffer, and also makes sense +to be the object that is used to track committed objects as it will always +exist once the object has been included in a transaction. + +The log item is already used to track the log items that have been written to +the log but not yet written to disk. Such log items are considered "active" +and as such are stored in the Active Item List (AIL) which is a LSN-ordered +double linked list. Items are inserted into this list during log buffer IO +completion, after which they are unpinned and can be written to disk. An object +that is in the AIL can be relogged, which causes the object to be pinned again +and then moved forward in the AIL when the log buffer IO completes for that +transaction. + +Essentially, this shows that an item that is in the AIL can still be modified +and relogged, so any tracking must be separate to the AIL infrastructure. As +such, we cannot reuse the AIL list pointers for tracking committed items, nor +can we store state in any field that is protected by the AIL lock. Hence the +committed item tracking needs it's own locks, lists and state fields in the log +item. + +Similar to the AIL, tracking of committed items is done through a new list +called the Committed Item List (CIL). The list tracks log items that have been +committed and have formatted memory buffers attached to them. It tracks objects +in transaction commit order, so when an object is relogged it is removed from +it's place in the list and re-inserted at the tail. This is entirely arbitrary +and done to make it easy for debugging - the last items in the list are the +ones that are most recently modified. Ordering of the CIL is not necessary for +transactional integrity (as discussed in the next section) so the ordering is +done for convenience/sanity of the developers. + + +Delayed Logging: Checkpoints +---------------------------- + +When we have a log synchronisation event, commonly known as a "log force", +all the items in the CIL must be written into the log via the log buffers. +We need to write these items in the order that they exist in the CIL, and they +need to be written as an atomic transaction. The need for all the objects to be +written as an atomic transaction comes from the requirements of relogging and +log replay - all the changes in all the objects in a given transaction must +either be completely replayed during log recovery, or not replayed at all. If +a transaction is not replayed because it is not complete in the log, then +no later transactions should be replayed, either. + +To fulfill this requirement, we need to write the entire CIL in a single log +transaction. Fortunately, the XFS log code has no fixed limit on the size of a +transaction, nor does the log replay code. The only fundamental limit is that +the transaction cannot be larger than just under half the size of the log. The +reason for this limit is that to find the head and tail of the log, there must +be at least one complete transaction in the log at any given time. If a +transaction is larger than half the log, then there is the possibility that a +crash during the write of a such a transaction could partially overwrite the +only complete previous transaction in the log. This will result in a recovery +failure and an inconsistent filesystem and hence we must enforce the maximum +size of a checkpoint to be slightly less than a half the log. + +Apart from this size requirement, a checkpoint transaction looks no different +to any other transaction - it contains a transaction header, a series of +formatted log items and a commit record at the tail. From a recovery +perspective, the checkpoint transaction is also no different - just a lot +bigger with a lot more items in it. The worst case effect of this is that we +might need to tune the recovery transaction object hash size. + +Because the checkpoint is just another transaction and all the changes to log +items are stored as log vectors, we can use the existing log buffer writing +code to write the changes into the log. To do this efficiently, we need to +minimise the time we hold the CIL locked while writing the checkpoint +transaction. The current log write code enables us to do this easily with the +way it separates the writing of the transaction contents (the log vectors) from +the transaction commit record, but tracking this requires us to have a +per-checkpoint context that travels through the log write process through to +checkpoint completion. + +Hence a checkpoint has a context that tracks the state of the current +checkpoint from initiation to checkpoint completion. A new context is initiated +at the same time a checkpoint transaction is started. That is, when we remove +all the current items from the CIL during a checkpoint operation, we move all +those changes into the current checkpoint context. We then initialise a new +context and attach that to the CIL for aggregation of new transactions. + +This allows us to unlock the CIL immediately after transfer of all the +committed items and effectively allow new transactions to be issued while we +are formatting the checkpoint into the log. It also allows concurrent +checkpoints to be written into the log buffers in the case of log force heavy +workloads, just like the existing transaction commit code does. This, however, +requires that we strictly order the commit records in the log so that +checkpoint sequence order is maintained during log replay. + +To ensure that we can be writing an item into a checkpoint transaction at +the same time another transaction modifies the item and inserts the log item +into the new CIL, then checkpoint transaction commit code cannot use log items +to store the list of log vectors that need to be written into the transaction. +Hence log vectors need to be able to be chained together to allow them to be +detached from the log items. That is, when the CIL is flushed the memory +buffer and log vector attached to each log item needs to be attached to the +checkpoint context so that the log item can be released. In diagrammatic form, +the CIL would look like this before the flush:: + + CIL Head + | + V + Log Item <-> log vector 1 -> memory buffer + | -> vector array + V + Log Item <-> log vector 2 -> memory buffer + | -> vector array + V + ...... + | + V + Log Item <-> log vector N-1 -> memory buffer + | -> vector array + V + Log Item <-> log vector N -> memory buffer + -> vector array + +And after the flush the CIL head is empty, and the checkpoint context log +vector list would look like:: + + Checkpoint Context + | + V + log vector 1 -> memory buffer + | -> vector array + | -> Log Item + V + log vector 2 -> memory buffer + | -> vector array + | -> Log Item + V + ...... + | + V + log vector N-1 -> memory buffer + | -> vector array + | -> Log Item + V + log vector N -> memory buffer + -> vector array + -> Log Item + +Once this transfer is done, the CIL can be unlocked and new transactions can +start, while the checkpoint flush code works over the log vector chain to +commit the checkpoint. + +Once the checkpoint is written into the log buffers, the checkpoint context is +attached to the log buffer that the commit record was written to along with a +completion callback. Log IO completion will call that callback, which can then +run transaction committed processing for the log items (i.e. insert into AIL +and unpin) in the log vector chain and then free the log vector chain and +checkpoint context. + +Discussion Point: I am uncertain as to whether the log item is the most +efficient way to track vectors, even though it seems like the natural way to do +it. The fact that we walk the log items (in the CIL) just to chain the log +vectors and break the link between the log item and the log vector means that +we take a cache line hit for the log item list modification, then another for +the log vector chaining. If we track by the log vectors, then we only need to +break the link between the log item and the log vector, which means we should +dirty only the log item cachelines. Normally I wouldn't be concerned about one +vs two dirty cachelines except for the fact I've seen upwards of 80,000 log +vectors in one checkpoint transaction. I'd guess this is a "measure and +compare" situation that can be done after a working and reviewed implementation +is in the dev tree.... + +Delayed Logging: Checkpoint Sequencing +-------------------------------------- + +One of the key aspects of the XFS transaction subsystem is that it tags +committed transactions with the log sequence number of the transaction commit. +This allows transactions to be issued asynchronously even though there may be +future operations that cannot be completed until that transaction is fully +committed to the log. In the rare case that a dependent operation occurs (e.g. +re-using a freed metadata extent for a data extent), a special, optimised log +force can be issued to force the dependent transaction to disk immediately. + +To do this, transactions need to record the LSN of the commit record of the +transaction. This LSN comes directly from the log buffer the transaction is +written into. While this works just fine for the existing transaction +mechanism, it does not work for delayed logging because transactions are not +written directly into the log buffers. Hence some other method of sequencing +transactions is required. + +As discussed in the checkpoint section, delayed logging uses per-checkpoint +contexts, and as such it is simple to assign a sequence number to each +checkpoint. Because the switching of checkpoint contexts must be done +atomically, it is simple to ensure that each new context has a monotonically +increasing sequence number assigned to it without the need for an external +atomic counter - we can just take the current context sequence number and add +one to it for the new context. + +Then, instead of assigning a log buffer LSN to the transaction commit LSN +during the commit, we can assign the current checkpoint sequence. This allows +operations that track transactions that have not yet completed know what +checkpoint sequence needs to be committed before they can continue. As a +result, the code that forces the log to a specific LSN now needs to ensure that +the log forces to a specific checkpoint. + +To ensure that we can do this, we need to track all the checkpoint contexts +that are currently committing to the log. When we flush a checkpoint, the +context gets added to a "committing" list which can be searched. When a +checkpoint commit completes, it is removed from the committing list. Because +the checkpoint context records the LSN of the commit record for the checkpoint, +we can also wait on the log buffer that contains the commit record, thereby +using the existing log force mechanisms to execute synchronous forces. + +It should be noted that the synchronous forces may need to be extended with +mitigation algorithms similar to the current log buffer code to allow +aggregation of multiple synchronous transactions if there are already +synchronous transactions being flushed. Investigation of the performance of the +current design is needed before making any decisions here. + +The main concern with log forces is to ensure that all the previous checkpoints +are also committed to disk before the one we need to wait for. Therefore we +need to check that all the prior contexts in the committing list are also +complete before waiting on the one we need to complete. We do this +synchronisation in the log force code so that we don't need to wait anywhere +else for such serialisation - it only matters when we do a log force. + +The only remaining complexity is that a log force now also has to handle the +case where the forcing sequence number is the same as the current context. That +is, we need to flush the CIL and potentially wait for it to complete. This is a +simple addition to the existing log forcing code to check the sequence numbers +and push if required. Indeed, placing the current sequence checkpoint flush in +the log force code enables the current mechanism for issuing synchronous +transactions to remain untouched (i.e. commit an asynchronous transaction, then +force the log at the LSN of that transaction) and so the higher level code +behaves the same regardless of whether delayed logging is being used or not. + +Delayed Logging: Checkpoint Log Space Accounting +------------------------------------------------ + +The big issue for a checkpoint transaction is the log space reservation for the +transaction. We don't know how big a checkpoint transaction is going to be +ahead of time, nor how many log buffers it will take to write out, nor the +number of split log vector regions are going to be used. We can track the +amount of log space required as we add items to the commit item list, but we +still need to reserve the space in the log for the checkpoint. + +A typical transaction reserves enough space in the log for the worst case space +usage of the transaction. The reservation accounts for log record headers, +transaction and region headers, headers for split regions, buffer tail padding, +etc. as well as the actual space for all the changed metadata in the +transaction. While some of this is fixed overhead, much of it is dependent on +the size of the transaction and the number of regions being logged (the number +of log vectors in the transaction). + +An example of the differences would be logging directory changes versus logging +inode changes. If you modify lots of inode cores (e.g. ``chmod -R g+w *``), then +there are lots of transactions that only contain an inode core and an inode log +format structure. That is, two vectors totaling roughly 150 bytes. If we modify +10,000 inodes, we have about 1.5MB of metadata to write in 20,000 vectors. Each +vector is 12 bytes, so the total to be logged is approximately 1.75MB. In +comparison, if we are logging full directory buffers, they are typically 4KB +each, so we in 1.5MB of directory buffers we'd have roughly 400 buffers and a +buffer format structure for each buffer - roughly 800 vectors or 1.51MB total +space. From this, it should be obvious that a static log space reservation is +not particularly flexible and is difficult to select the "optimal value" for +all workloads. + +Further, if we are going to use a static reservation, which bit of the entire +reservation does it cover? We account for space used by the transaction +reservation by tracking the space currently used by the object in the CIL and +then calculating the increase or decrease in space used as the object is +relogged. This allows for a checkpoint reservation to only have to account for +log buffer metadata used such as log header records. + +However, even using a static reservation for just the log metadata is +problematic. Typically log record headers use at least 16KB of log space per +1MB of log space consumed (512 bytes per 32k) and the reservation needs to be +large enough to handle arbitrary sized checkpoint transactions. This +reservation needs to be made before the checkpoint is started, and we need to +be able to reserve the space without sleeping. For a 8MB checkpoint, we need a +reservation of around 150KB, which is a non-trivial amount of space. + +A static reservation needs to manipulate the log grant counters - we can take a +permanent reservation on the space, but we still need to make sure we refresh +the write reservation (the actual space available to the transaction) after +every checkpoint transaction completion. Unfortunately, if this space is not +available when required, then the regrant code will sleep waiting for it. + +The problem with this is that it can lead to deadlocks as we may need to commit +checkpoints to be able to free up log space (refer back to the description of +rolling transactions for an example of this). Hence we *must* always have +space available in the log if we are to use static reservations, and that is +very difficult and complex to arrange. It is possible to do, but there is a +simpler way. + +The simpler way of doing this is tracking the entire log space used by the +items in the CIL and using this to dynamically calculate the amount of log +space required by the log metadata. If this log metadata space changes as a +result of a transaction commit inserting a new memory buffer into the CIL, then +the difference in space required is removed from the transaction that causes +the change. Transactions at this level will *always* have enough space +available in their reservation for this as they have already reserved the +maximal amount of log metadata space they require, and such a delta reservation +will always be less than or equal to the maximal amount in the reservation. + +Hence we can grow the checkpoint transaction reservation dynamically as items +are added to the CIL and avoid the need for reserving and regranting log space +up front. This avoids deadlocks and removes a blocking point from the +checkpoint flush code. + +As mentioned early, transactions can't grow to more than half the size of the +log. Hence as part of the reservation growing, we need to also check the size +of the reservation against the maximum allowed transaction size. If we reach +the maximum threshold, we need to push the CIL to the log. This is effectively +a "background flush" and is done on demand. This is identical to +a CIL push triggered by a log force, only that there is no waiting for the +checkpoint commit to complete. This background push is checked and executed by +transaction commit code. + +If the transaction subsystem goes idle while we still have items in the CIL, +they will be flushed by the periodic log force issued by the xfssyncd. This log +force will push the CIL to disk, and if the transaction subsystem stays idle, +allow the idle log to be covered (effectively marked clean) in exactly the same +manner that is done for the existing logging method. A discussion point is +whether this log force needs to be done more frequently than the current rate +which is once every 30s. + + +Delayed Logging: Log Item Pinning +--------------------------------- + +Currently log items are pinned during transaction commit while the items are +still locked. This happens just after the items are formatted, though it could +be done any time before the items are unlocked. The result of this mechanism is +that items get pinned once for every transaction that is committed to the log +buffers. Hence items that are relogged in the log buffers will have a pin count +for every outstanding transaction they were dirtied in. When each of these +transactions is completed, they will unpin the item once. As a result, the item +only becomes unpinned when all the transactions complete and there are no +pending transactions. Thus the pinning and unpinning of a log item is symmetric +as there is a 1:1 relationship with transaction commit and log item completion. + +For delayed logging, however, we have an asymmetric transaction commit to +completion relationship. Every time an object is relogged in the CIL it goes +through the commit process without a corresponding completion being registered. +That is, we now have a many-to-one relationship between transaction commit and +log item completion. The result of this is that pinning and unpinning of the +log items becomes unbalanced if we retain the "pin on transaction commit, unpin +on transaction completion" model. + +To keep pin/unpin symmetry, the algorithm needs to change to a "pin on +insertion into the CIL, unpin on checkpoint completion". In other words, the +pinning and unpinning becomes symmetric around a checkpoint context. We have to +pin the object the first time it is inserted into the CIL - if it is already in +the CIL during a transaction commit, then we do not pin it again. Because there +can be multiple outstanding checkpoint contexts, we can still see elevated pin +counts, but as each checkpoint completes the pin count will retain the correct +value according to it's context. + +Just to make matters more slightly more complex, this checkpoint level context +for the pin count means that the pinning of an item must take place under the +CIL commit/flush lock. If we pin the object outside this lock, we cannot +guarantee which context the pin count is associated with. This is because of +the fact pinning the item is dependent on whether the item is present in the +current CIL or not. If we don't pin the CIL first before we check and pin the +object, we have a race with CIL being flushed between the check and the pin +(or not pinning, as the case may be). Hence we must hold the CIL flush/commit +lock to guarantee that we pin the items correctly. + +Delayed Logging: Concurrent Scalability +--------------------------------------- + +A fundamental requirement for the CIL is that accesses through transaction +commits must scale to many concurrent commits. The current transaction commit +code does not break down even when there are transactions coming from 2048 +processors at once. The current transaction code does not go any faster than if +there was only one CPU using it, but it does not slow down either. + +As a result, the delayed logging transaction commit code needs to be designed +for concurrency from the ground up. It is obvious that there are serialisation +points in the design - the three important ones are: + + 1. Locking out new transaction commits while flushing the CIL + 2. Adding items to the CIL and updating item space accounting + 3. Checkpoint commit ordering + +Looking at the transaction commit and CIL flushing interactions, it is clear +that we have a many-to-one interaction here. That is, the only restriction on +the number of concurrent transactions that can be trying to commit at once is +the amount of space available in the log for their reservations. The practical +limit here is in the order of several hundred concurrent transactions for a +128MB log, which means that it is generally one per CPU in a machine. + +The amount of time a transaction commit needs to hold out a flush is a +relatively long period of time - the pinning of log items needs to be done +while we are holding out a CIL flush, so at the moment that means it is held +across the formatting of the objects into memory buffers (i.e. while memcpy()s +are in progress). Ultimately a two pass algorithm where the formatting is done +separately to the pinning of objects could be used to reduce the hold time of +the transaction commit side. + +Because of the number of potential transaction commit side holders, the lock +really needs to be a sleeping lock - if the CIL flush takes the lock, we do not +want every other CPU in the machine spinning on the CIL lock. Given that +flushing the CIL could involve walking a list of tens of thousands of log +items, it will get held for a significant time and so spin contention is a +significant concern. Preventing lots of CPUs spinning doing nothing is the +main reason for choosing a sleeping lock even though nothing in either the +transaction commit or CIL flush side sleeps with the lock held. + +It should also be noted that CIL flushing is also a relatively rare operation +compared to transaction commit for asynchronous transaction workloads - only +time will tell if using a read-write semaphore for exclusion will limit +transaction commit concurrency due to cache line bouncing of the lock on the +read side. + +The second serialisation point is on the transaction commit side where items +are inserted into the CIL. Because transactions can enter this code +concurrently, the CIL needs to be protected separately from the above +commit/flush exclusion. It also needs to be an exclusive lock but it is only +held for a very short time and so a spin lock is appropriate here. It is +possible that this lock will become a contention point, but given the short +hold time once per transaction I think that contention is unlikely. + +The final serialisation point is the checkpoint commit record ordering code +that is run as part of the checkpoint commit and log force sequencing. The code +path that triggers a CIL flush (i.e. whatever triggers the log force) will enter +an ordering loop after writing all the log vectors into the log buffers but +before writing the commit record. This loop walks the list of committing +checkpoints and needs to block waiting for checkpoints to complete their commit +record write. As a result it needs a lock and a wait variable. Log force +sequencing also requires the same lock, list walk, and blocking mechanism to +ensure completion of checkpoints. + +These two sequencing operations can use the mechanism even though the +events they are waiting for are different. The checkpoint commit record +sequencing needs to wait until checkpoint contexts contain a commit LSN +(obtained through completion of a commit record write) while log force +sequencing needs to wait until previous checkpoint contexts are removed from +the committing list (i.e. they've completed). A simple wait variable and +broadcast wakeups (thundering herds) has been used to implement these two +serialisation queues. They use the same lock as the CIL, too. If we see too +much contention on the CIL lock, or too many context switches as a result of +the broadcast wakeups these operations can be put under a new spinlock and +given separate wait lists to reduce lock contention and the number of processes +woken by the wrong event. + + +Lifecycle Changes +----------------- + +The existing log item life cycle is as follows:: + + 1. Transaction allocate + 2. Transaction reserve + 3. Lock item + 4. Join item to transaction + If not already attached, + Allocate log item + Attach log item to owner item + Attach log item to transaction + 5. Modify item + Record modifications in log item + 6. Transaction commit + Pin item in memory + Format item into log buffer + Write commit LSN into transaction + Unlock item + Attach transaction to log buffer + + <log buffer IO dispatched> + <log buffer IO completes> + + 7. Transaction completion + Mark log item committed + Insert log item into AIL + Write commit LSN into log item + Unpin log item + 8. AIL traversal + Lock item + Mark log item clean + Flush item to disk + + <item IO completion> + + 9. Log item removed from AIL + Moves log tail + Item unlocked + +Essentially, steps 1-6 operate independently from step 7, which is also +independent of steps 8-9. An item can be locked in steps 1-6 or steps 8-9 +at the same time step 7 is occurring, but only steps 1-6 or 8-9 can occur +at the same time. If the log item is in the AIL or between steps 6 and 7 +and steps 1-6 are re-entered, then the item is relogged. Only when steps 8-9 +are entered and completed is the object considered clean. + +With delayed logging, there are new steps inserted into the life cycle:: + + 1. Transaction allocate + 2. Transaction reserve + 3. Lock item + 4. Join item to transaction + If not already attached, + Allocate log item + Attach log item to owner item + Attach log item to transaction + 5. Modify item + Record modifications in log item + 6. Transaction commit + Pin item in memory if not pinned in CIL + Format item into log vector + buffer + Attach log vector and buffer to log item + Insert log item into CIL + Write CIL context sequence into transaction + Unlock item + + <next log force> + + 7. CIL push + lock CIL flush + Chain log vectors and buffers together + Remove items from CIL + unlock CIL flush + write log vectors into log + sequence commit records + attach checkpoint context to log buffer + + <log buffer IO dispatched> + <log buffer IO completes> + + 8. Checkpoint completion + Mark log item committed + Insert item into AIL + Write commit LSN into log item + Unpin log item + 9. AIL traversal + Lock item + Mark log item clean + Flush item to disk + <item IO completion> + 10. Log item removed from AIL + Moves log tail + Item unlocked + +From this, it can be seen that the only life cycle differences between the two +logging methods are in the middle of the life cycle - they still have the same +beginning and end and execution constraints. The only differences are in the +committing of the log items to the log itself and the completion processing. +Hence delayed logging should not introduce any constraints on log item +behaviour, allocation or freeing that don't already exist. + +As a result of this zero-impact "insertion" of delayed logging infrastructure +and the design of the internal structures to avoid on disk format changes, we +can basically switch between delayed logging and the existing mechanism with a +mount option. Fundamentally, there is no reason why the log manager would not +be able to swap methods automatically and transparently depending on load +characteristics, but this should not be necessary if delayed logging works as +designed. diff --git a/Documentation/filesystems/xfs-self-describing-metadata.rst b/Documentation/filesystems/xfs-self-describing-metadata.rst new file mode 100644 index 000000000..b79dbf36d --- /dev/null +++ b/Documentation/filesystems/xfs-self-describing-metadata.rst @@ -0,0 +1,352 @@ +.. SPDX-License-Identifier: GPL-2.0 + +============================ +XFS Self Describing Metadata +============================ + +Introduction +============ + +The largest scalability problem facing XFS is not one of algorithmic +scalability, but of verification of the filesystem structure. Scalabilty of the +structures and indexes on disk and the algorithms for iterating them are +adequate for supporting PB scale filesystems with billions of inodes, however it +is this very scalability that causes the verification problem. + +Almost all metadata on XFS is dynamically allocated. The only fixed location +metadata is the allocation group headers (SB, AGF, AGFL and AGI), while all +other metadata structures need to be discovered by walking the filesystem +structure in different ways. While this is already done by userspace tools for +validating and repairing the structure, there are limits to what they can +verify, and this in turn limits the supportable size of an XFS filesystem. + +For example, it is entirely possible to manually use xfs_db and a bit of +scripting to analyse the structure of a 100TB filesystem when trying to +determine the root cause of a corruption problem, but it is still mainly a +manual task of verifying that things like single bit errors or misplaced writes +weren't the ultimate cause of a corruption event. It may take a few hours to a +few days to perform such forensic analysis, so for at this scale root cause +analysis is entirely possible. + +However, if we scale the filesystem up to 1PB, we now have 10x as much metadata +to analyse and so that analysis blows out towards weeks/months of forensic work. +Most of the analysis work is slow and tedious, so as the amount of analysis goes +up, the more likely that the cause will be lost in the noise. Hence the primary +concern for supporting PB scale filesystems is minimising the time and effort +required for basic forensic analysis of the filesystem structure. + + +Self Describing Metadata +======================== + +One of the problems with the current metadata format is that apart from the +magic number in the metadata block, we have no other way of identifying what it +is supposed to be. We can't even identify if it is the right place. Put simply, +you can't look at a single metadata block in isolation and say "yes, it is +supposed to be there and the contents are valid". + +Hence most of the time spent on forensic analysis is spent doing basic +verification of metadata values, looking for values that are in range (and hence +not detected by automated verification checks) but are not correct. Finding and +understanding how things like cross linked block lists (e.g. sibling +pointers in a btree end up with loops in them) are the key to understanding what +went wrong, but it is impossible to tell what order the blocks were linked into +each other or written to disk after the fact. + +Hence we need to record more information into the metadata to allow us to +quickly determine if the metadata is intact and can be ignored for the purpose +of analysis. We can't protect against every possible type of error, but we can +ensure that common types of errors are easily detectable. Hence the concept of +self describing metadata. + +The first, fundamental requirement of self describing metadata is that the +metadata object contains some form of unique identifier in a well known +location. This allows us to identify the expected contents of the block and +hence parse and verify the metadata object. IF we can't independently identify +the type of metadata in the object, then the metadata doesn't describe itself +very well at all! + +Luckily, almost all XFS metadata has magic numbers embedded already - only the +AGFL, remote symlinks and remote attribute blocks do not contain identifying +magic numbers. Hence we can change the on-disk format of all these objects to +add more identifying information and detect this simply by changing the magic +numbers in the metadata objects. That is, if it has the current magic number, +the metadata isn't self identifying. If it contains a new magic number, it is +self identifying and we can do much more expansive automated verification of the +metadata object at runtime, during forensic analysis or repair. + +As a primary concern, self describing metadata needs some form of overall +integrity checking. We cannot trust the metadata if we cannot verify that it has +not been changed as a result of external influences. Hence we need some form of +integrity check, and this is done by adding CRC32c validation to the metadata +block. If we can verify the block contains the metadata it was intended to +contain, a large amount of the manual verification work can be skipped. + +CRC32c was selected as metadata cannot be more than 64k in length in XFS and +hence a 32 bit CRC is more than sufficient to detect multi-bit errors in +metadata blocks. CRC32c is also now hardware accelerated on common CPUs so it is +fast. So while CRC32c is not the strongest of possible integrity checks that +could be used, it is more than sufficient for our needs and has relatively +little overhead. Adding support for larger integrity fields and/or algorithms +does really provide any extra value over CRC32c, but it does add a lot of +complexity and so there is no provision for changing the integrity checking +mechanism. + +Self describing metadata needs to contain enough information so that the +metadata block can be verified as being in the correct place without needing to +look at any other metadata. This means it needs to contain location information. +Just adding a block number to the metadata is not sufficient to protect against +mis-directed writes - a write might be misdirected to the wrong LUN and so be +written to the "correct block" of the wrong filesystem. Hence location +information must contain a filesystem identifier as well as a block number. + +Another key information point in forensic analysis is knowing who the metadata +block belongs to. We already know the type, the location, that it is valid +and/or corrupted, and how long ago that it was last modified. Knowing the owner +of the block is important as it allows us to find other related metadata to +determine the scope of the corruption. For example, if we have a extent btree +object, we don't know what inode it belongs to and hence have to walk the entire +filesystem to find the owner of the block. Worse, the corruption could mean that +no owner can be found (i.e. it's an orphan block), and so without an owner field +in the metadata we have no idea of the scope of the corruption. If we have an +owner field in the metadata object, we can immediately do top down validation to +determine the scope of the problem. + +Different types of metadata have different owner identifiers. For example, +directory, attribute and extent tree blocks are all owned by an inode, while +freespace btree blocks are owned by an allocation group. Hence the size and +contents of the owner field are determined by the type of metadata object we are +looking at. The owner information can also identify misplaced writes (e.g. +freespace btree block written to the wrong AG). + +Self describing metadata also needs to contain some indication of when it was +written to the filesystem. One of the key information points when doing forensic +analysis is how recently the block was modified. Correlation of set of corrupted +metadata blocks based on modification times is important as it can indicate +whether the corruptions are related, whether there's been multiple corruption +events that lead to the eventual failure, and even whether there are corruptions +present that the run-time verification is not detecting. + +For example, we can determine whether a metadata object is supposed to be free +space or still allocated if it is still referenced by its owner by looking at +when the free space btree block that contains the block was last written +compared to when the metadata object itself was last written. If the free space +block is more recent than the object and the object's owner, then there is a +very good chance that the block should have been removed from the owner. + +To provide this "written timestamp", each metadata block gets the Log Sequence +Number (LSN) of the most recent transaction it was modified on written into it. +This number will always increase over the life of the filesystem, and the only +thing that resets it is running xfs_repair on the filesystem. Further, by use of +the LSN we can tell if the corrupted metadata all belonged to the same log +checkpoint and hence have some idea of how much modification occurred between +the first and last instance of corrupt metadata on disk and, further, how much +modification occurred between the corruption being written and when it was +detected. + +Runtime Validation +================== + +Validation of self-describing metadata takes place at runtime in two places: + + - immediately after a successful read from disk + - immediately prior to write IO submission + +The verification is completely stateless - it is done independently of the +modification process, and seeks only to check that the metadata is what it says +it is and that the metadata fields are within bounds and internally consistent. +As such, we cannot catch all types of corruption that can occur within a block +as there may be certain limitations that operational state enforces of the +metadata, or there may be corruption of interblock relationships (e.g. corrupted +sibling pointer lists). Hence we still need stateful checking in the main code +body, but in general most of the per-field validation is handled by the +verifiers. + +For read verification, the caller needs to specify the expected type of metadata +that it should see, and the IO completion process verifies that the metadata +object matches what was expected. If the verification process fails, then it +marks the object being read as EFSCORRUPTED. The caller needs to catch this +error (same as for IO errors), and if it needs to take special action due to a +verification error it can do so by catching the EFSCORRUPTED error value. If we +need more discrimination of error type at higher levels, we can define new +error numbers for different errors as necessary. + +The first step in read verification is checking the magic number and determining +whether CRC validating is necessary. If it is, the CRC32c is calculated and +compared against the value stored in the object itself. Once this is validated, +further checks are made against the location information, followed by extensive +object specific metadata validation. If any of these checks fail, then the +buffer is considered corrupt and the EFSCORRUPTED error is set appropriately. + +Write verification is the opposite of the read verification - first the object +is extensively verified and if it is OK we then update the LSN from the last +modification made to the object, After this, we calculate the CRC and insert it +into the object. Once this is done the write IO is allowed to continue. If any +error occurs during this process, the buffer is again marked with a EFSCORRUPTED +error for the higher layers to catch. + +Structures +========== + +A typical on-disk structure needs to contain the following information:: + + struct xfs_ondisk_hdr { + __be32 magic; /* magic number */ + __be32 crc; /* CRC, not logged */ + uuid_t uuid; /* filesystem identifier */ + __be64 owner; /* parent object */ + __be64 blkno; /* location on disk */ + __be64 lsn; /* last modification in log, not logged */ + }; + +Depending on the metadata, this information may be part of a header structure +separate to the metadata contents, or may be distributed through an existing +structure. The latter occurs with metadata that already contains some of this +information, such as the superblock and AG headers. + +Other metadata may have different formats for the information, but the same +level of information is generally provided. For example: + + - short btree blocks have a 32 bit owner (ag number) and a 32 bit block + number for location. The two of these combined provide the same + information as @owner and @blkno in eh above structure, but using 8 + bytes less space on disk. + + - directory/attribute node blocks have a 16 bit magic number, and the + header that contains the magic number has other information in it as + well. hence the additional metadata headers change the overall format + of the metadata. + +A typical buffer read verifier is structured as follows:: + + #define XFS_FOO_CRC_OFF offsetof(struct xfs_ondisk_hdr, crc) + + static void + xfs_foo_read_verify( + struct xfs_buf *bp) + { + struct xfs_mount *mp = bp->b_mount; + + if ((xfs_sb_version_hascrc(&mp->m_sb) && + !xfs_verify_cksum(bp->b_addr, BBTOB(bp->b_length), + XFS_FOO_CRC_OFF)) || + !xfs_foo_verify(bp)) { + XFS_CORRUPTION_ERROR(__func__, XFS_ERRLEVEL_LOW, mp, bp->b_addr); + xfs_buf_ioerror(bp, EFSCORRUPTED); + } + } + +The code ensures that the CRC is only checked if the filesystem has CRCs enabled +by checking the superblock of the feature bit, and then if the CRC verifies OK +(or is not needed) it verifies the actual contents of the block. + +The verifier function will take a couple of different forms, depending on +whether the magic number can be used to determine the format of the block. In +the case it can't, the code is structured as follows:: + + static bool + xfs_foo_verify( + struct xfs_buf *bp) + { + struct xfs_mount *mp = bp->b_mount; + struct xfs_ondisk_hdr *hdr = bp->b_addr; + + if (hdr->magic != cpu_to_be32(XFS_FOO_MAGIC)) + return false; + + if (!xfs_sb_version_hascrc(&mp->m_sb)) { + if (!uuid_equal(&hdr->uuid, &mp->m_sb.sb_uuid)) + return false; + if (bp->b_bn != be64_to_cpu(hdr->blkno)) + return false; + if (hdr->owner == 0) + return false; + } + + /* object specific verification checks here */ + + return true; + } + +If there are different magic numbers for the different formats, the verifier +will look like:: + + static bool + xfs_foo_verify( + struct xfs_buf *bp) + { + struct xfs_mount *mp = bp->b_mount; + struct xfs_ondisk_hdr *hdr = bp->b_addr; + + if (hdr->magic == cpu_to_be32(XFS_FOO_CRC_MAGIC)) { + if (!uuid_equal(&hdr->uuid, &mp->m_sb.sb_uuid)) + return false; + if (bp->b_bn != be64_to_cpu(hdr->blkno)) + return false; + if (hdr->owner == 0) + return false; + } else if (hdr->magic != cpu_to_be32(XFS_FOO_MAGIC)) + return false; + + /* object specific verification checks here */ + + return true; + } + +Write verifiers are very similar to the read verifiers, they just do things in +the opposite order to the read verifiers. A typical write verifier:: + + static void + xfs_foo_write_verify( + struct xfs_buf *bp) + { + struct xfs_mount *mp = bp->b_mount; + struct xfs_buf_log_item *bip = bp->b_fspriv; + + if (!xfs_foo_verify(bp)) { + XFS_CORRUPTION_ERROR(__func__, XFS_ERRLEVEL_LOW, mp, bp->b_addr); + xfs_buf_ioerror(bp, EFSCORRUPTED); + return; + } + + if (!xfs_sb_version_hascrc(&mp->m_sb)) + return; + + + if (bip) { + struct xfs_ondisk_hdr *hdr = bp->b_addr; + hdr->lsn = cpu_to_be64(bip->bli_item.li_lsn); + } + xfs_update_cksum(bp->b_addr, BBTOB(bp->b_length), XFS_FOO_CRC_OFF); + } + +This will verify the internal structure of the metadata before we go any +further, detecting corruptions that have occurred as the metadata has been +modified in memory. If the metadata verifies OK, and CRCs are enabled, we then +update the LSN field (when it was last modified) and calculate the CRC on the +metadata. Once this is done, we can issue the IO. + +Inodes and Dquots +================= + +Inodes and dquots are special snowflakes. They have per-object CRC and +self-identifiers, but they are packed so that there are multiple objects per +buffer. Hence we do not use per-buffer verifiers to do the work of per-object +verification and CRC calculations. The per-buffer verifiers simply perform basic +identification of the buffer - that they contain inodes or dquots, and that +there are magic numbers in all the expected spots. All further CRC and +verification checks are done when each inode is read from or written back to the +buffer. + +The structure of the verifiers and the identifiers checks is very similar to the +buffer code described above. The only difference is where they are called. For +example, inode read verification is done in xfs_inode_from_disk() when the inode +is first read out of the buffer and the struct xfs_inode is instantiated. The +inode is already extensively verified during writeback in xfs_iflush_int, so the +only addition here is to add the LSN and CRC to the inode as it is copied back +into the buffer. + +XXX: inode unlinked list modification doesn't recalculate the inode CRC! None of +the unlinked list modifications check or update CRCs, neither during unlink nor +log recovery. So, it's gone unnoticed until now. This won't matter immediately - +repair will probably complain about it - but it needs to be fixed. diff --git a/Documentation/filesystems/zonefs.rst b/Documentation/filesystems/zonefs.rst new file mode 100644 index 000000000..6b213fe9a --- /dev/null +++ b/Documentation/filesystems/zonefs.rst @@ -0,0 +1,437 @@ +.. SPDX-License-Identifier: GPL-2.0 + +================================================ +ZoneFS - Zone filesystem for Zoned block devices +================================================ + +Introduction +============ + +zonefs is a very simple file system exposing each zone of a zoned block device +as a file. Unlike a regular POSIX-compliant file system with native zoned block +device support (e.g. f2fs), zonefs does not hide the sequential write +constraint of zoned block devices to the user. Files representing sequential +write zones of the device must be written sequentially starting from the end +of the file (append only writes). + +As such, zonefs is in essence closer to a raw block device access interface +than to a full-featured POSIX file system. The goal of zonefs is to simplify +the implementation of zoned block device support in applications by replacing +raw block device file accesses with a richer file API, avoiding relying on +direct block device file ioctls which may be more obscure to developers. One +example of this approach is the implementation of LSM (log-structured merge) +tree structures (such as used in RocksDB and LevelDB) on zoned block devices +by allowing SSTables to be stored in a zone file similarly to a regular file +system rather than as a range of sectors of the entire disk. The introduction +of the higher level construct "one file is one zone" can help reducing the +amount of changes needed in the application as well as introducing support for +different application programming languages. + +Zoned block devices +------------------- + +Zoned storage devices belong to a class of storage devices with an address +space that is divided into zones. A zone is a group of consecutive LBAs and all +zones are contiguous (there are no LBA gaps). Zones may have different types. + +* Conventional zones: there are no access constraints to LBAs belonging to + conventional zones. Any read or write access can be executed, similarly to a + regular block device. +* Sequential zones: these zones accept random reads but must be written + sequentially. Each sequential zone has a write pointer maintained by the + device that keeps track of the mandatory start LBA position of the next write + to the device. As a result of this write constraint, LBAs in a sequential zone + cannot be overwritten. Sequential zones must first be erased using a special + command (zone reset) before rewriting. + +Zoned storage devices can be implemented using various recording and media +technologies. The most common form of zoned storage today uses the SCSI Zoned +Block Commands (ZBC) and Zoned ATA Commands (ZAC) interfaces on Shingled +Magnetic Recording (SMR) HDDs. + +Solid State Disks (SSD) storage devices can also implement a zoned interface +to, for instance, reduce internal write amplification due to garbage collection. +The NVMe Zoned NameSpace (ZNS) is a technical proposal of the NVMe standard +committee aiming at adding a zoned storage interface to the NVMe protocol. + +Zonefs Overview +=============== + +Zonefs exposes the zones of a zoned block device as files. The files +representing zones are grouped by zone type, which are themselves represented +by sub-directories. This file structure is built entirely using zone information +provided by the device and so does not require any complex on-disk metadata +structure. + +On-disk metadata +---------------- + +zonefs on-disk metadata is reduced to an immutable super block which +persistently stores a magic number and optional feature flags and values. On +mount, zonefs uses blkdev_report_zones() to obtain the device zone configuration +and populates the mount point with a static file tree solely based on this +information. File sizes come from the device zone type and write pointer +position managed by the device itself. + +The super block is always written on disk at sector 0. The first zone of the +device storing the super block is never exposed as a zone file by zonefs. If +the zone containing the super block is a sequential zone, the mkzonefs format +tool always "finishes" the zone, that is, it transitions the zone to a full +state to make it read-only, preventing any data write. + +Zone type sub-directories +------------------------- + +Files representing zones of the same type are grouped together under the same +sub-directory automatically created on mount. + +For conventional zones, the sub-directory "cnv" is used. This directory is +however created if and only if the device has usable conventional zones. If +the device only has a single conventional zone at sector 0, the zone will not +be exposed as a file as it will be used to store the zonefs super block. For +such devices, the "cnv" sub-directory will not be created. + +For sequential write zones, the sub-directory "seq" is used. + +These two directories are the only directories that exist in zonefs. Users +cannot create other directories and cannot rename nor delete the "cnv" and +"seq" sub-directories. + +The size of the directories indicated by the st_size field of struct stat, +obtained with the stat() or fstat() system calls, indicates the number of files +existing under the directory. + +Zone files +---------- + +Zone files are named using the number of the zone they represent within the set +of zones of a particular type. That is, both the "cnv" and "seq" directories +contain files named "0", "1", "2", ... The file numbers also represent +increasing zone start sector on the device. + +All read and write operations to zone files are not allowed beyond the file +maximum size, that is, beyond the zone capacity. Any access exceeding the zone +capacity is failed with the -EFBIG error. + +Creating, deleting, renaming or modifying any attribute of files and +sub-directories is not allowed. + +The number of blocks of a file as reported by stat() and fstat() indicates the +capacity of the zone file, or in other words, the maximum file size. + +Conventional zone files +----------------------- + +The size of conventional zone files is fixed to the size of the zone they +represent. Conventional zone files cannot be truncated. + +These files can be randomly read and written using any type of I/O operation: +buffered I/Os, direct I/Os, memory mapped I/Os (mmap), etc. There are no I/O +constraint for these files beyond the file size limit mentioned above. + +Sequential zone files +--------------------- + +The size of sequential zone files grouped in the "seq" sub-directory represents +the file's zone write pointer position relative to the zone start sector. + +Sequential zone files can only be written sequentially, starting from the file +end, that is, write operations can only be append writes. Zonefs makes no +attempt at accepting random writes and will fail any write request that has a +start offset not corresponding to the end of the file, or to the end of the last +write issued and still in-flight (for asynchronous I/O operations). + +Since dirty page writeback by the page cache does not guarantee a sequential +write pattern, zonefs prevents buffered writes and writeable shared mappings +on sequential files. Only direct I/O writes are accepted for these files. +zonefs relies on the sequential delivery of write I/O requests to the device +implemented by the block layer elevator. An elevator implementing the sequential +write feature for zoned block device (ELEVATOR_F_ZBD_SEQ_WRITE elevator feature) +must be used. This type of elevator (e.g. mq-deadline) is set by default +for zoned block devices on device initialization. + +There are no restrictions on the type of I/O used for read operations in +sequential zone files. Buffered I/Os, direct I/Os and shared read mappings are +all accepted. + +Truncating sequential zone files is allowed only down to 0, in which case, the +zone is reset to rewind the file zone write pointer position to the start of +the zone, or up to the zone capacity, in which case the file's zone is +transitioned to the FULL state (finish zone operation). + +Format options +-------------- + +Several optional features of zonefs can be enabled at format time. + +* Conventional zone aggregation: ranges of contiguous conventional zones can be + aggregated into a single larger file instead of the default one file per zone. +* File ownership: The owner UID and GID of zone files is by default 0 (root) + but can be changed to any valid UID/GID. +* File access permissions: the default 640 access permissions can be changed. + +IO error handling +----------------- + +Zoned block devices may fail I/O requests for reasons similar to regular block +devices, e.g. due to bad sectors. However, in addition to such known I/O +failure pattern, the standards governing zoned block devices behavior define +additional conditions that result in I/O errors. + +* A zone may transition to the read-only condition (BLK_ZONE_COND_READONLY): + While the data already written in the zone is still readable, the zone can + no longer be written. No user action on the zone (zone management command or + read/write access) can change the zone condition back to a normal read/write + state. While the reasons for the device to transition a zone to read-only + state are not defined by the standards, a typical cause for such transition + would be a defective write head on an HDD (all zones under this head are + changed to read-only). + +* A zone may transition to the offline condition (BLK_ZONE_COND_OFFLINE): + An offline zone cannot be read nor written. No user action can transition an + offline zone back to an operational good state. Similarly to zone read-only + transitions, the reasons for a drive to transition a zone to the offline + condition are undefined. A typical cause would be a defective read-write head + on an HDD causing all zones on the platter under the broken head to be + inaccessible. + +* Unaligned write errors: These errors result from the host issuing write + requests with a start sector that does not correspond to a zone write pointer + position when the write request is executed by the device. Even though zonefs + enforces sequential file write for sequential zones, unaligned write errors + may still happen in the case of a partial failure of a very large direct I/O + operation split into multiple BIOs/requests or asynchronous I/O operations. + If one of the write request within the set of sequential write requests + issued to the device fails, all write requests queued after it will + become unaligned and fail. + +* Delayed write errors: similarly to regular block devices, if the device side + write cache is enabled, write errors may occur in ranges of previously + completed writes when the device write cache is flushed, e.g. on fsync(). + Similarly to the previous immediate unaligned write error case, delayed write + errors can propagate through a stream of cached sequential data for a zone + causing all data to be dropped after the sector that caused the error. + +All I/O errors detected by zonefs are notified to the user with an error code +return for the system call that triggered or detected the error. The recovery +actions taken by zonefs in response to I/O errors depend on the I/O type (read +vs write) and on the reason for the error (bad sector, unaligned writes or zone +condition change). + +* For read I/O errors, zonefs does not execute any particular recovery action, + but only if the file zone is still in a good condition and there is no + inconsistency between the file inode size and its zone write pointer position. + If a problem is detected, I/O error recovery is executed (see below table). + +* For write I/O errors, zonefs I/O error recovery is always executed. + +* A zone condition change to read-only or offline also always triggers zonefs + I/O error recovery. + +Zonefs minimal I/O error recovery may change a file size and file access +permissions. + +* File size changes: + Immediate or delayed write errors in a sequential zone file may cause the file + inode size to be inconsistent with the amount of data successfully written in + the file zone. For instance, the partial failure of a multi-BIO large write + operation will cause the zone write pointer to advance partially, even though + the entire write operation will be reported as failed to the user. In such + case, the file inode size must be advanced to reflect the zone write pointer + change and eventually allow the user to restart writing at the end of the + file. + A file size may also be reduced to reflect a delayed write error detected on + fsync(): in this case, the amount of data effectively written in the zone may + be less than originally indicated by the file inode size. After such I/O + error, zonefs always fixes the file inode size to reflect the amount of data + persistently stored in the file zone. + +* Access permission changes: + A zone condition change to read-only is indicated with a change in the file + access permissions to render the file read-only. This disables changes to the + file attributes and data modification. For offline zones, all permissions + (read and write) to the file are disabled. + +Further action taken by zonefs I/O error recovery can be controlled by the user +with the "errors=xxx" mount option. The table below summarizes the result of +zonefs I/O error processing depending on the mount option and on the zone +conditions:: + + +--------------+-----------+-----------------------------------------+ + | | | Post error state | + | "errors=xxx" | device | access permissions | + | mount | zone | file file device zone | + | option | condition | size read write read write | + +--------------+-----------+-----------------------------------------+ + | | good | fixed yes no yes yes | + | remount-ro | read-only | as is yes no yes no | + | (default) | offline | 0 no no no no | + +--------------+-----------+-----------------------------------------+ + | | good | fixed yes no yes yes | + | zone-ro | read-only | as is yes no yes no | + | | offline | 0 no no no no | + +--------------+-----------+-----------------------------------------+ + | | good | 0 no no yes yes | + | zone-offline | read-only | 0 no no yes no | + | | offline | 0 no no no no | + +--------------+-----------+-----------------------------------------+ + | | good | fixed yes yes yes yes | + | repair | read-only | as is yes no yes no | + | | offline | 0 no no no no | + +--------------+-----------+-----------------------------------------+ + +Further notes: + +* The "errors=remount-ro" mount option is the default behavior of zonefs I/O + error processing if no errors mount option is specified. +* With the "errors=remount-ro" mount option, the change of the file access + permissions to read-only applies to all files. The file system is remounted + read-only. +* Access permission and file size changes due to the device transitioning zones + to the offline condition are permanent. Remounting or reformatting the device + with mkfs.zonefs (mkzonefs) will not change back offline zone files to a good + state. +* File access permission changes to read-only due to the device transitioning + zones to the read-only condition are permanent. Remounting or reformatting + the device will not re-enable file write access. +* File access permission changes implied by the remount-ro, zone-ro and + zone-offline mount options are temporary for zones in a good condition. + Unmounting and remounting the file system will restore the previous default + (format time values) access rights to the files affected. +* The repair mount option triggers only the minimal set of I/O error recovery + actions, that is, file size fixes for zones in a good condition. Zones + indicated as being read-only or offline by the device still imply changes to + the zone file access permissions as noted in the table above. + +Mount options +------------- + +zonefs define the "errors=<behavior>" mount option to allow the user to specify +zonefs behavior in response to I/O errors, inode size inconsistencies or zone +condition changes. The defined behaviors are as follow: + +* remount-ro (default) +* zone-ro +* zone-offline +* repair + +The run-time I/O error actions defined for each behavior are detailed in the +previous section. Mount time I/O errors will cause the mount operation to fail. +The handling of read-only zones also differs between mount-time and run-time. +If a read-only zone is found at mount time, the zone is always treated in the +same manner as offline zones, that is, all accesses are disabled and the zone +file size set to 0. This is necessary as the write pointer of read-only zones +is defined as invalib by the ZBC and ZAC standards, making it impossible to +discover the amount of data that has been written to the zone. In the case of a +read-only zone discovered at run-time, as indicated in the previous section. +The size of the zone file is left unchanged from its last updated value. + +A zoned block device (e.g. an NVMe Zoned Namespace device) may have limits on +the number of zones that can be active, that is, zones that are in the +implicit open, explicit open or closed conditions. This potential limitation +translates into a risk for applications to see write IO errors due to this +limit being exceeded if the zone of a file is not already active when a write +request is issued by the user. + +To avoid these potential errors, the "explicit-open" mount option forces zones +to be made active using an open zone command when a file is opened for writing +for the first time. If the zone open command succeeds, the application is then +guaranteed that write requests can be processed. Conversely, the +"explicit-open" mount option will result in a zone close command being issued +to the device on the last close() of a zone file if the zone is not full nor +empty. + +Zonefs User Space Tools +======================= + +The mkzonefs tool is used to format zoned block devices for use with zonefs. +This tool is available on Github at: + +https://github.com/damien-lemoal/zonefs-tools + +zonefs-tools also includes a test suite which can be run against any zoned +block device, including null_blk block device created with zoned mode. + +Examples +-------- + +The following formats a 15TB host-managed SMR HDD with 256 MB zones +with the conventional zones aggregation feature enabled:: + + # mkzonefs -o aggr_cnv /dev/sdX + # mount -t zonefs /dev/sdX /mnt + # ls -l /mnt/ + total 0 + dr-xr-xr-x 2 root root 1 Nov 25 13:23 cnv + dr-xr-xr-x 2 root root 55356 Nov 25 13:23 seq + +The size of the zone files sub-directories indicate the number of files +existing for each type of zones. In this example, there is only one +conventional zone file (all conventional zones are aggregated under a single +file):: + + # ls -l /mnt/cnv + total 137101312 + -rw-r----- 1 root root 140391743488 Nov 25 13:23 0 + +This aggregated conventional zone file can be used as a regular file:: + + # mkfs.ext4 /mnt/cnv/0 + # mount -o loop /mnt/cnv/0 /data + +The "seq" sub-directory grouping files for sequential write zones has in this +example 55356 zones:: + + # ls -lv /mnt/seq + total 14511243264 + -rw-r----- 1 root root 0 Nov 25 13:23 0 + -rw-r----- 1 root root 0 Nov 25 13:23 1 + -rw-r----- 1 root root 0 Nov 25 13:23 2 + ... + -rw-r----- 1 root root 0 Nov 25 13:23 55354 + -rw-r----- 1 root root 0 Nov 25 13:23 55355 + +For sequential write zone files, the file size changes as data is appended at +the end of the file, similarly to any regular file system:: + + # dd if=/dev/zero of=/mnt/seq/0 bs=4096 count=1 conv=notrunc oflag=direct + 1+0 records in + 1+0 records out + 4096 bytes (4.1 kB, 4.0 KiB) copied, 0.00044121 s, 9.3 MB/s + + # ls -l /mnt/seq/0 + -rw-r----- 1 root root 4096 Nov 25 13:23 /mnt/seq/0 + +The written file can be truncated to the zone size, preventing any further +write operation:: + + # truncate -s 268435456 /mnt/seq/0 + # ls -l /mnt/seq/0 + -rw-r----- 1 root root 268435456 Nov 25 13:49 /mnt/seq/0 + +Truncation to 0 size allows freeing the file zone storage space and restart +append-writes to the file:: + + # truncate -s 0 /mnt/seq/0 + # ls -l /mnt/seq/0 + -rw-r----- 1 root root 0 Nov 25 13:49 /mnt/seq/0 + +Since files are statically mapped to zones on the disk, the number of blocks +of a file as reported by stat() and fstat() indicates the capacity of the file +zone:: + + # stat /mnt/seq/0 + File: /mnt/seq/0 + Size: 0 Blocks: 524288 IO Block: 4096 regular empty file + Device: 870h/2160d Inode: 50431 Links: 1 + Access: (0640/-rw-r-----) Uid: ( 0/ root) Gid: ( 0/ root) + Access: 2019-11-25 13:23:57.048971997 +0900 + Modify: 2019-11-25 13:52:25.553805765 +0900 + Change: 2019-11-25 13:52:25.553805765 +0900 + Birth: - + +The number of blocks of the file ("Blocks") in units of 512B blocks gives the +maximum file size of 524288 * 512 B = 256 MB, corresponding to the device zone +capacity in this example. Of note is that the "IO block" field always +indicates the minimum I/O size for writes and corresponds to the device +physical sector size. |