diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/alpha/kernel/sys_sio.c | 484 |
1 files changed, 484 insertions, 0 deletions
diff --git a/arch/alpha/kernel/sys_sio.c b/arch/alpha/kernel/sys_sio.c new file mode 100644 index 000000000..7c420d8da --- /dev/null +++ b/arch/alpha/kernel/sys_sio.c @@ -0,0 +1,484 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * linux/arch/alpha/kernel/sys_sio.c + * + * Copyright (C) 1995 David A Rusling + * Copyright (C) 1996 Jay A Estabrook + * Copyright (C) 1998, 1999 Richard Henderson + * + * Code for all boards that route the PCI interrupts through the SIO + * PCI/ISA bridge. This includes Noname (AXPpci33), Multia (UDB), + * Kenetics's Platform 2000, Avanti (AlphaStation), XL, and AlphaBook1. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/screen_info.h> + +#include <asm/compiler.h> +#include <asm/ptrace.h> +#include <asm/dma.h> +#include <asm/irq.h> +#include <asm/mmu_context.h> +#include <asm/io.h> +#include <asm/core_apecs.h> +#include <asm/core_lca.h> +#include <asm/tlbflush.h> + +#include "proto.h" +#include "irq_impl.h" +#include "pci_impl.h" +#include "machvec_impl.h" +#include "pc873xx.h" + +#if defined(ALPHA_RESTORE_SRM_SETUP) +/* Save LCA configuration data as the console had it set up. */ +struct +{ + unsigned int orig_route_tab; /* for SAVE/RESTORE */ +} saved_config __attribute((common)); +#endif + + +static void __init +sio_init_irq(void) +{ + if (alpha_using_srm) + alpha_mv.device_interrupt = srm_device_interrupt; + + init_i8259a_irqs(); + common_init_isa_dma(); +} + +static inline void __init +alphabook1_init_arch(void) +{ + /* The AlphaBook1 has LCD video fixed at 800x600, + 37 rows and 100 cols. */ + screen_info.orig_y = 37; + screen_info.orig_video_cols = 100; + screen_info.orig_video_lines = 37; + + lca_init_arch(); +} + + +/* + * sio_route_tab selects irq routing in PCI/ISA bridge so that: + * PIRQ0 -> irq 15 + * PIRQ1 -> irq 9 + * PIRQ2 -> irq 10 + * PIRQ3 -> irq 11 + * + * This probably ought to be configurable via MILO. For + * example, sound boards seem to like using IRQ 9. + * + * This is NOT how we should do it. PIRQ0-X should have + * their own IRQs, the way intel uses the IO-APIC IRQs. + */ + +static void __init +sio_pci_route(void) +{ + unsigned int orig_route_tab; + + /* First, ALWAYS read and print the original setting. */ + pci_bus_read_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60, + &orig_route_tab); + printk("%s: PIRQ original 0x%x new 0x%x\n", __func__, + orig_route_tab, alpha_mv.sys.sio.route_tab); + +#if defined(ALPHA_RESTORE_SRM_SETUP) + saved_config.orig_route_tab = orig_route_tab; +#endif + + /* Now override with desired setting. */ + pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60, + alpha_mv.sys.sio.route_tab); +} + +static bool sio_pci_dev_irq_needs_level(const struct pci_dev *dev) +{ + if ((dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) && + (dev->class >> 8 != PCI_CLASS_BRIDGE_PCMCIA)) + return false; + + return true; +} + +static unsigned int __init +sio_collect_irq_levels(void) +{ + unsigned int level_bits = 0; + struct pci_dev *dev = NULL; + + /* Iterate through the devices, collecting IRQ levels. */ + for_each_pci_dev(dev) { + if (!sio_pci_dev_irq_needs_level(dev)) + continue; + + if (dev->irq) + level_bits |= (1 << dev->irq); + } + return level_bits; +} + +static void __sio_fixup_irq_levels(unsigned int level_bits, bool reset) +{ + unsigned int old_level_bits; + + /* + * Now, make all PCI interrupts level sensitive. Notice: + * these registers must be accessed byte-wise. inw()/outw() + * don't work. + * + * Make sure to turn off any level bits set for IRQs 9,10,11,15, + * so that the only bits getting set are for devices actually found. + * Note that we do preserve the remainder of the bits, which we hope + * will be set correctly by ARC/SRM. + * + * Note: we at least preserve any level-set bits on AlphaBook1 + */ + old_level_bits = inb(0x4d0) | (inb(0x4d1) << 8); + + if (reset) + old_level_bits &= 0x71ff; + + level_bits |= old_level_bits; + + outb((level_bits >> 0) & 0xff, 0x4d0); + outb((level_bits >> 8) & 0xff, 0x4d1); +} + +static inline void +sio_fixup_irq_levels(unsigned int level_bits) +{ + __sio_fixup_irq_levels(level_bits, true); +} + +static inline int +noname_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + /* + * The Noname board has 5 PCI slots with each of the 4 + * interrupt pins routed to different pins on the PCI/ISA + * bridge (PIRQ0-PIRQ3). The table below is based on + * information available at: + * + * http://ftp.digital.com/pub/DEC/axppci/ref_interrupts.txt + * + * I have no information on the Avanti interrupt routing, but + * the routing seems to be identical to the Noname except + * that the Avanti has an additional slot whose routing I'm + * unsure of. + * + * pirq_tab[0] is a fake entry to deal with old PCI boards + * that have the interrupt pin number hardwired to 0 (meaning + * that they use the default INTA line, if they are interrupt + * driven at all). + */ + static char irq_tab[][5] = { + /*INT A B C D */ + { 3, 3, 3, 3, 3}, /* idsel 6 (53c810) */ + {-1, -1, -1, -1, -1}, /* idsel 7 (SIO: PCI/ISA bridge) */ + { 2, 2, -1, -1, -1}, /* idsel 8 (Hack: slot closest ISA) */ + {-1, -1, -1, -1, -1}, /* idsel 9 (unused) */ + {-1, -1, -1, -1, -1}, /* idsel 10 (unused) */ + { 0, 0, 2, 1, 0}, /* idsel 11 KN25_PCI_SLOT0 */ + { 1, 1, 0, 2, 1}, /* idsel 12 KN25_PCI_SLOT1 */ + { 2, 2, 1, 0, 2}, /* idsel 13 KN25_PCI_SLOT2 */ + { 0, 0, 0, 0, 0}, /* idsel 14 AS255 TULIP */ + }; + const long min_idsel = 6, max_idsel = 14, irqs_per_slot = 5; + int irq = COMMON_TABLE_LOOKUP, tmp; + tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq); + + irq = irq >= 0 ? tmp : -1; + + /* Fixup IRQ level if an actual IRQ mapping is detected */ + if (sio_pci_dev_irq_needs_level(dev) && irq >= 0) + __sio_fixup_irq_levels(1 << irq, false); + + return irq; +} + +static inline int +p2k_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + static char irq_tab[][5] = { + /*INT A B C D */ + { 0, 0, -1, -1, -1}, /* idsel 6 (53c810) */ + {-1, -1, -1, -1, -1}, /* idsel 7 (SIO: PCI/ISA bridge) */ + { 1, 1, 2, 3, 0}, /* idsel 8 (slot A) */ + { 2, 2, 3, 0, 1}, /* idsel 9 (slot B) */ + {-1, -1, -1, -1, -1}, /* idsel 10 (unused) */ + {-1, -1, -1, -1, -1}, /* idsel 11 (unused) */ + { 3, 3, -1, -1, -1}, /* idsel 12 (CMD0646) */ + }; + const long min_idsel = 6, max_idsel = 12, irqs_per_slot = 5; + int irq = COMMON_TABLE_LOOKUP, tmp; + tmp = __kernel_extbl(alpha_mv.sys.sio.route_tab, irq); + return irq >= 0 ? tmp : -1; +} + +static inline void __init +noname_init_pci(void) +{ + common_init_pci(); + sio_pci_route(); + sio_fixup_irq_levels(sio_collect_irq_levels()); + + if (pc873xx_probe() == -1) { + printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n"); + } else { + printk(KERN_INFO "Found %s Super IO chip at 0x%x\n", + pc873xx_get_model(), pc873xx_get_base()); + + /* Enabling things in the Super IO chip doesn't actually + * configure and enable things, the legacy drivers still + * need to do the actual configuration and enabling. + * This only unblocks them. + */ + +#if !defined(CONFIG_ALPHA_AVANTI) + /* Don't bother on the Avanti family. + * None of them had on-board IDE. + */ + pc873xx_enable_ide(); +#endif + pc873xx_enable_epp19(); + } +} + +static inline void __init +alphabook1_init_pci(void) +{ + struct pci_dev *dev; + unsigned char orig, config; + + common_init_pci(); + sio_pci_route(); + + /* + * On the AlphaBook1, the PCMCIA chip (Cirrus 6729) + * is sensitive to PCI bus bursts, so we must DISABLE + * burst mode for the NCR 8xx SCSI... :-( + * + * Note that the NCR810 SCSI driver must preserve the + * setting of the bit in order for this to work. At the + * moment (2.0.29), ncr53c8xx.c does NOT do this, but + * 53c7,8xx.c DOES. + */ + + dev = NULL; + while ((dev = pci_get_device(PCI_VENDOR_ID_NCR, PCI_ANY_ID, dev))) { + if (dev->device == PCI_DEVICE_ID_NCR_53C810 + || dev->device == PCI_DEVICE_ID_NCR_53C815 + || dev->device == PCI_DEVICE_ID_NCR_53C820 + || dev->device == PCI_DEVICE_ID_NCR_53C825) { + unsigned long io_port; + unsigned char ctest4; + + io_port = dev->resource[0].start; + ctest4 = inb(io_port+0x21); + if (!(ctest4 & 0x80)) { + printk("AlphaBook1 NCR init: setting" + " burst disable\n"); + outb(ctest4 | 0x80, io_port+0x21); + } + } + } + + /* Do not set *ANY* level triggers for AlphaBook1. */ + sio_fixup_irq_levels(0); + + /* Make sure that register PR1 indicates 1Mb mem */ + outb(0x0f, 0x3ce); orig = inb(0x3cf); /* read PR5 */ + outb(0x0f, 0x3ce); outb(0x05, 0x3cf); /* unlock PR0-4 */ + outb(0x0b, 0x3ce); config = inb(0x3cf); /* read PR1 */ + if ((config & 0xc0) != 0xc0) { + printk("AlphaBook1 VGA init: setting 1Mb memory\n"); + config |= 0xc0; + outb(0x0b, 0x3ce); outb(config, 0x3cf); /* write PR1 */ + } + outb(0x0f, 0x3ce); outb(orig, 0x3cf); /* (re)lock PR0-4 */ +} + +void +sio_kill_arch(int mode) +{ +#if defined(ALPHA_RESTORE_SRM_SETUP) + /* Since we cannot read the PCI DMA Window CSRs, we + * cannot restore them here. + * + * However, we CAN read the PIRQ route register, so restore it + * now... + */ + pci_bus_write_config_dword(pci_isa_hose->bus, PCI_DEVFN(7, 0), 0x60, + saved_config.orig_route_tab); +#endif +} + + +/* + * The System Vectors + */ + +#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_BOOK1) +struct alpha_machine_vector alphabook1_mv __initmv = { + .vector_name = "AlphaBook1", + DO_EV4_MMU, + DO_DEFAULT_RTC, + DO_LCA_IO, + .machine_check = lca_machine_check, + .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, + .min_io_address = DEFAULT_IO_BASE, + .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE, + + .nr_irqs = 16, + .device_interrupt = isa_device_interrupt, + + .init_arch = alphabook1_init_arch, + .init_irq = sio_init_irq, + .init_rtc = common_init_rtc, + .init_pci = alphabook1_init_pci, + .kill_arch = sio_kill_arch, + .pci_map_irq = noname_map_irq, + .pci_swizzle = common_swizzle, + + .sys = { .sio = { + /* NCR810 SCSI is 14, PCMCIA controller is 15. */ + .route_tab = 0x0e0f0a0a, + }} +}; +ALIAS_MV(alphabook1) +#endif + +#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_AVANTI) +struct alpha_machine_vector avanti_mv __initmv = { + .vector_name = "Avanti", + DO_EV4_MMU, + DO_DEFAULT_RTC, + DO_APECS_IO, + .machine_check = apecs_machine_check, + .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, + .min_io_address = DEFAULT_IO_BASE, + .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE, + + .nr_irqs = 16, + .device_interrupt = isa_device_interrupt, + + .init_arch = apecs_init_arch, + .init_irq = sio_init_irq, + .init_rtc = common_init_rtc, + .init_pci = noname_init_pci, + .kill_arch = sio_kill_arch, + .pci_map_irq = noname_map_irq, + .pci_swizzle = common_swizzle, + + .sys = { .sio = { + .route_tab = 0x0b0a050f, /* leave 14 for IDE, 9 for SND */ + }} +}; +ALIAS_MV(avanti) +#endif + +#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_NONAME) +struct alpha_machine_vector noname_mv __initmv = { + .vector_name = "Noname", + DO_EV4_MMU, + DO_DEFAULT_RTC, + DO_LCA_IO, + .machine_check = lca_machine_check, + .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, + .min_io_address = DEFAULT_IO_BASE, + .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE, + + .nr_irqs = 16, + .device_interrupt = srm_device_interrupt, + + .init_arch = lca_init_arch, + .init_irq = sio_init_irq, + .init_rtc = common_init_rtc, + .init_pci = noname_init_pci, + .kill_arch = sio_kill_arch, + .pci_map_irq = noname_map_irq, + .pci_swizzle = common_swizzle, + + .sys = { .sio = { + /* For UDB, the only available PCI slot must not map to IRQ 9, + since that's the builtin MSS sound chip. That PCI slot + will map to PIRQ1 (for INTA at least), so we give it IRQ 15 + instead. + + Unfortunately we have to do this for NONAME as well, since + they are co-indicated when the platform type "Noname" is + selected... :-( */ + + .route_tab = 0x0b0a0f0d, + }} +}; +ALIAS_MV(noname) +#endif + +#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_P2K) +struct alpha_machine_vector p2k_mv __initmv = { + .vector_name = "Platform2000", + DO_EV4_MMU, + DO_DEFAULT_RTC, + DO_LCA_IO, + .machine_check = lca_machine_check, + .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, + .min_io_address = DEFAULT_IO_BASE, + .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE, + + .nr_irqs = 16, + .device_interrupt = srm_device_interrupt, + + .init_arch = lca_init_arch, + .init_irq = sio_init_irq, + .init_rtc = common_init_rtc, + .init_pci = noname_init_pci, + .kill_arch = sio_kill_arch, + .pci_map_irq = p2k_map_irq, + .pci_swizzle = common_swizzle, + + .sys = { .sio = { + .route_tab = 0x0b0a090f, + }} +}; +ALIAS_MV(p2k) +#endif + +#if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_XL) +struct alpha_machine_vector xl_mv __initmv = { + .vector_name = "XL", + DO_EV4_MMU, + DO_DEFAULT_RTC, + DO_APECS_IO, + .machine_check = apecs_machine_check, + .max_isa_dma_address = ALPHA_XL_MAX_ISA_DMA_ADDRESS, + .min_io_address = DEFAULT_IO_BASE, + .min_mem_address = XL_DEFAULT_MEM_BASE, + + .nr_irqs = 16, + .device_interrupt = isa_device_interrupt, + + .init_arch = apecs_init_arch, + .init_irq = sio_init_irq, + .init_rtc = common_init_rtc, + .init_pci = noname_init_pci, + .kill_arch = sio_kill_arch, + .pci_map_irq = noname_map_irq, + .pci_swizzle = common_swizzle, + + .sys = { .sio = { + .route_tab = 0x0b0a090f, + }} +}; +ALIAS_MV(xl) +#endif |