diff options
Diffstat (limited to '')
30 files changed, 3380 insertions, 0 deletions
diff --git a/arch/arc/boot/.gitignore b/arch/arc/boot/.gitignore new file mode 100644 index 000000000..675db1494 --- /dev/null +++ b/arch/arc/boot/.gitignore @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +uImage diff --git a/arch/arc/boot/Makefile b/arch/arc/boot/Makefile new file mode 100644 index 000000000..3b1f8a69a --- /dev/null +++ b/arch/arc/boot/Makefile @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: GPL-2.0 +targets := vmlinux.bin vmlinux.bin.gz + +# uImage build relies on mkimage being availble on your host for ARC target +# You will need to build u-boot for ARC, rename mkimage to arc-elf32-mkimage +# and make sure it's reacable from your PATH + +OBJCOPYFLAGS= -O binary -R .note -R .note.gnu.build-id -R .comment -S + +LINUX_START_TEXT = $$(readelf -h vmlinux | \ + grep "Entry point address" | grep -o 0x.*) + +UIMAGE_LOADADDR = $(CONFIG_LINUX_LINK_BASE) +UIMAGE_ENTRYADDR = $(LINUX_START_TEXT) + +targets += uImage.bin +targets += uImage.gz +targets += uImage.lzma +extra-y += vmlinux.bin +extra-y += vmlinux.bin.gz +extra-y += vmlinux.bin.lzma + +$(obj)/vmlinux.bin: vmlinux FORCE + $(call if_changed,objcopy) + +$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE + $(call if_changed,gzip) + +$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE + $(call if_changed,lzma) + +$(obj)/uImage.bin: $(obj)/vmlinux.bin FORCE + $(call if_changed,uimage,none) + +$(obj)/uImage.gz: $(obj)/vmlinux.bin.gz FORCE + $(call if_changed,uimage,gzip) + +$(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma FORCE + $(call if_changed,uimage,lzma) diff --git a/arch/arc/boot/dts/Makefile b/arch/arc/boot/dts/Makefile new file mode 100644 index 000000000..8483a86c7 --- /dev/null +++ b/arch/arc/boot/dts/Makefile @@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0 +# Built-in dtb +builtindtb-y := nsim_700 + +ifneq ($(CONFIG_ARC_BUILTIN_DTB_NAME),"") + builtindtb-y := $(patsubst "%",%,$(CONFIG_ARC_BUILTIN_DTB_NAME)) +endif + +obj-y += $(builtindtb-y).dtb.o +dtb-y := $(builtindtb-y).dtb + +# for CONFIG_OF_ALL_DTBS test +dtstree := $(srctree)/$(src) +dtb- := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) + +# board-specific dtc flags +DTC_FLAGS_hsdk += --pad 20 diff --git a/arch/arc/boot/dts/abilis_tb100.dtsi b/arch/arc/boot/dts/abilis_tb100.dtsi new file mode 100644 index 000000000..41026a3bf --- /dev/null +++ b/arch/arc/boot/dts/abilis_tb100.dtsi @@ -0,0 +1,336 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Abilis Systems TB100 SOC device tree + * + * Copyright (C) Abilis Systems 2013 + * + * Author: Christian Ruppert <christian.ruppert@abilis.com> + */ + +/include/ "abilis_tb10x.dtsi" + + +/ { + soc100 { + bus-frequency = <166666666>; + + pll0: oscillator { + clock-frequency = <1000000000>; + }; + cpu_clk: clkdiv_cpu { + clock-mult = <1>; + clock-div = <2>; + }; + ahb_clk: clkdiv_ahb { + clock-mult = <1>; + clock-div = <6>; + }; + + iomux: iomux@ff10601c { + /* Port 1 */ + pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */ + abilis,function = "mis0"; + }; + pctl_tsin_s1: pctl-tsin-s1 { /* Serial TS-in 1 */ + abilis,function = "mis1"; + }; + pctl_gpio_a: pctl-gpio-a { /* GPIO bank A */ + abilis,function = "gpioa"; + }; + pctl_tsin_p1: pctl-tsin-p1 { /* Parallel TS-in 1 */ + abilis,function = "mip1"; + }; + /* Port 2 */ + pctl_tsin_s2: pctl-tsin-s2 { /* Serial TS-in 2 */ + abilis,function = "mis2"; + }; + pctl_tsin_s3: pctl-tsin-s3 { /* Serial TS-in 3 */ + abilis,function = "mis3"; + }; + pctl_gpio_c: pctl-gpio-c { /* GPIO bank C */ + abilis,function = "gpioc"; + }; + pctl_tsin_p3: pctl-tsin-p3 { /* Parallel TS-in 3 */ + abilis,function = "mip3"; + }; + /* Port 3 */ + pctl_tsin_s4: pctl-tsin-s4 { /* Serial TS-in 4 */ + abilis,function = "mis4"; + }; + pctl_tsin_s5: pctl-tsin-s5 { /* Serial TS-in 5 */ + abilis,function = "mis5"; + }; + pctl_gpio_e: pctl-gpio-e { /* GPIO bank E */ + abilis,function = "gpioe"; + }; + pctl_tsin_p5: pctl-tsin-p5 { /* Parallel TS-in 5 */ + abilis,function = "mip5"; + }; + /* Port 4 */ + pctl_tsin_s6: pctl-tsin-s6 { /* Serial TS-in 6 */ + abilis,function = "mis6"; + }; + pctl_tsin_s7: pctl-tsin-s7 { /* Serial TS-in 7 */ + abilis,function = "mis7"; + }; + pctl_gpio_g: pctl-gpio-g { /* GPIO bank G */ + abilis,function = "gpiog"; + }; + pctl_tsin_p7: pctl-tsin-p7 { /* Parallel TS-in 7 */ + abilis,function = "mip7"; + }; + /* Port 5 */ + pctl_gpio_j: pctl-gpio-j { /* GPIO bank J */ + abilis,function = "gpioj"; + }; + pctl_gpio_k: pctl-gpio-k { /* GPIO bank K */ + abilis,function = "gpiok"; + }; + pctl_ciplus: pctl-ciplus { /* CI+ interface */ + abilis,function = "ciplus"; + }; + pctl_mcard: pctl-mcard { /* M-Card interface */ + abilis,function = "mcard"; + }; + /* Port 6 */ + pctl_tsout_p: pctl-tsout-p { /* Parallel TS-out */ + abilis,function = "mop"; + }; + pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */ + abilis,function = "mos0"; + }; + pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */ + abilis,function = "mos1"; + }; + pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */ + abilis,function = "mos2"; + }; + pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */ + abilis,function = "mos3"; + }; + /* Port 7 */ + pctl_uart0: pctl-uart0 { /* UART 0 */ + abilis,function = "uart0"; + }; + pctl_uart1: pctl-uart1 { /* UART 1 */ + abilis,function = "uart1"; + }; + pctl_gpio_l: pctl-gpio-l { /* GPIO bank L */ + abilis,function = "gpiol"; + }; + pctl_gpio_m: pctl-gpio-m { /* GPIO bank M */ + abilis,function = "gpiom"; + }; + /* Port 8 */ + pctl_spi3: pctl-spi3 { + abilis,function = "spi3"; + }; + /* Port 9 */ + pctl_spi1: pctl-spi1 { + abilis,function = "spi1"; + }; + pctl_gpio_n: pctl-gpio-n { + abilis,function = "gpion"; + }; + /* Unmuxed GPIOs */ + pctl_gpio_b: pctl-gpio-b { + abilis,function = "gpiob"; + }; + pctl_gpio_d: pctl-gpio-d { + abilis,function = "gpiod"; + }; + pctl_gpio_f: pctl-gpio-f { + abilis,function = "gpiof"; + }; + pctl_gpio_h: pctl-gpio-h { + abilis,function = "gpioh"; + }; + pctl_gpio_i: pctl-gpio-i { + abilis,function = "gpioi"; + }; + }; + + gpioa: gpio@ff140000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff140000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <3>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioa"; + }; + gpiob: gpio@ff141000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff141000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <2>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiob"; + }; + gpioc: gpio@ff142000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff142000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <3>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioc"; + }; + gpiod: gpio@ff143000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff143000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <2>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiod"; + }; + gpioe: gpio@ff144000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff144000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <3>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioe"; + }; + gpiof: gpio@ff145000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff145000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <2>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiof"; + }; + gpiog: gpio@ff146000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff146000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <3>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiog"; + }; + gpioh: gpio@ff147000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff147000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <2>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioh"; + }; + gpioi: gpio@ff148000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff148000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <12>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioi"; + }; + gpioj: gpio@ff149000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff149000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <32>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioj"; + }; + gpiok: gpio@ff14a000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff14a000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <22>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiok"; + }; + gpiol: gpio@ff14b000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff14b000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <4>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiol"; + }; + gpiom: gpio@ff14c000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff14c000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <4>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiom"; + }; + gpion: gpio@ff14d000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff14d000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <5>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpion"; + }; + }; +}; diff --git a/arch/arc/boot/dts/abilis_tb100_dvk.dts b/arch/arc/boot/dts/abilis_tb100_dvk.dts new file mode 100644 index 000000000..6d346de5e --- /dev/null +++ b/arch/arc/boot/dts/abilis_tb100_dvk.dts @@ -0,0 +1,116 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Abilis Systems TB100 Development Kit PCB device tree + * + * Copyright (C) Abilis Systems 2013 + * + * Author: Christian Ruppert <christian.ruppert@abilis.com> + */ + +/dts-v1/; + +/include/ "abilis_tb100.dtsi" + +/ { + model = "abilis,tb100"; + chosen { + bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8"; + }; + + aliases { }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x08000000>; /* 128M */ + }; + + soc100 { + uart@ff100000 { + pinctrl-names = "default"; + pinctrl-0 = <&pctl_uart0>; + }; + ethernet@fe100000 { + phy-mode = "rgmii"; + }; + + i2c0: i2c@ff120000 { + i2c-sda-hold-time-ns = <432>; + }; + i2c1: i2c@ff121000 { + i2c-sda-hold-time-ns = <432>; + }; + i2c2: i2c@ff122000 { + i2c-sda-hold-time-ns = <432>; + }; + i2c3: i2c@ff123000 { + i2c-sda-hold-time-ns = <432>; + }; + i2c4: i2c@ff124000 { + i2c-sda-hold-time-ns = <432>; + }; + + leds { + compatible = "gpio-leds"; + power { + label = "Power"; + gpios = <&gpioi 0 0>; + linux,default-trigger = "default-on"; + }; + heartbeat { + label = "Heartbeat"; + gpios = <&gpioi 1 0>; + linux,default-trigger = "heartbeat"; + }; + led2 { + label = "LED2"; + gpios = <&gpioi 2 0>; + default-state = "off"; + }; + led3 { + label = "LED3"; + gpios = <&gpioi 3 0>; + default-state = "off"; + }; + led4 { + label = "LED4"; + gpios = <&gpioi 4 0>; + default-state = "off"; + }; + led5 { + label = "LED5"; + gpios = <&gpioi 5 0>; + default-state = "off"; + }; + led6 { + label = "LED6"; + gpios = <&gpioi 6 0>; + default-state = "off"; + }; + led7 { + label = "LED7"; + gpios = <&gpioi 7 0>; + default-state = "off"; + }; + led8 { + label = "LED8"; + gpios = <&gpioi 8 0>; + default-state = "off"; + }; + led9 { + label = "LED9"; + gpios = <&gpioi 9 0>; + default-state = "off"; + }; + led10 { + label = "LED10"; + gpios = <&gpioi 10 0>; + default-state = "off"; + }; + led11 { + label = "LED11"; + gpios = <&gpioi 11 0>; + default-state = "off"; + }; + }; + }; +}; diff --git a/arch/arc/boot/dts/abilis_tb101.dtsi b/arch/arc/boot/dts/abilis_tb101.dtsi new file mode 100644 index 000000000..041ab1ba0 --- /dev/null +++ b/arch/arc/boot/dts/abilis_tb101.dtsi @@ -0,0 +1,345 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Abilis Systems TB101 SOC device tree + * + * Copyright (C) Abilis Systems 2013 + * + * Author: Christian Ruppert <christian.ruppert@abilis.com> + */ + +/include/ "abilis_tb10x.dtsi" + + +/ { + soc100 { + bus-frequency = <166666666>; + + pll0: oscillator { + clock-frequency = <1000000000>; + }; + cpu_clk: clkdiv_cpu { + clock-mult = <1>; + clock-div = <2>; + }; + ahb_clk: clkdiv_ahb { + clock-mult = <1>; + clock-div = <6>; + }; + + iomux: iomux@ff10601c { + /* Port 1 */ + pctl_tsin_s0: pctl-tsin-s0 { /* Serial TS-in 0 */ + abilis,function = "mis0"; + }; + pctl_tsin_s1: pctl-tsin-s1 { /* Serial TS-in 1 */ + abilis,function = "mis1"; + }; + pctl_gpio_a: pctl-gpio-a { /* GPIO bank A */ + abilis,function = "gpioa"; + }; + pctl_tsin_p1: pctl-tsin-p1 { /* Parallel TS-in 1 */ + abilis,function = "mip1"; + }; + /* Port 2 */ + pctl_tsin_s2: pctl-tsin-s2 { /* Serial TS-in 2 */ + abilis,function = "mis2"; + }; + pctl_tsin_s3: pctl-tsin-s3 { /* Serial TS-in 3 */ + abilis,function = "mis3"; + }; + pctl_gpio_c: pctl-gpio-c { /* GPIO bank C */ + abilis,function = "gpioc"; + }; + pctl_tsin_p3: pctl-tsin-p3 { /* Parallel TS-in 3 */ + abilis,function = "mip3"; + }; + /* Port 3 */ + pctl_tsin_s4: pctl-tsin-s4 { /* Serial TS-in 4 */ + abilis,function = "mis4"; + }; + pctl_tsin_s5: pctl-tsin-s5 { /* Serial TS-in 5 */ + abilis,function = "mis5"; + }; + pctl_gpio_e: pctl-gpio-e { /* GPIO bank E */ + abilis,function = "gpioe"; + }; + pctl_tsin_p5: pctl-tsin-p5 { /* Parallel TS-in 5 */ + abilis,function = "mip5"; + }; + /* Port 4 */ + pctl_tsin_s6: pctl-tsin-s6 { /* Serial TS-in 6 */ + abilis,function = "mis6"; + }; + pctl_tsin_s7: pctl-tsin-s7 { /* Serial TS-in 7 */ + abilis,function = "mis7"; + }; + pctl_gpio_g: pctl-gpio-g { /* GPIO bank G */ + abilis,function = "gpiog"; + }; + pctl_tsin_p7: pctl-tsin-p7 { /* Parallel TS-in 7 */ + abilis,function = "mip7"; + }; + /* Port 5 */ + pctl_gpio_j: pctl-gpio-j { /* GPIO bank J */ + abilis,function = "gpioj"; + }; + pctl_gpio_k: pctl-gpio-k { /* GPIO bank K */ + abilis,function = "gpiok"; + }; + pctl_ciplus: pctl-ciplus { /* CI+ interface */ + abilis,function = "ciplus"; + }; + pctl_mcard: pctl-mcard { /* M-Card interface */ + abilis,function = "mcard"; + }; + pctl_stc0: pctl-stc0 { /* Smart card I/F 0 */ + abilis,function = "stc0"; + }; + pctl_stc1: pctl-stc1 { /* Smart card I/F 1 */ + abilis,function = "stc1"; + }; + /* Port 6 */ + pctl_tsout_p: pctl-tsout-p { /* Parallel TS-out */ + abilis,function = "mop"; + }; + pctl_tsout_s0: pctl-tsout-s0 { /* Serial TS-out 0 */ + abilis,function = "mos0"; + }; + pctl_tsout_s1: pctl-tsout-s1 { /* Serial TS-out 1 */ + abilis,function = "mos1"; + }; + pctl_tsout_s2: pctl-tsout-s2 { /* Serial TS-out 2 */ + abilis,function = "mos2"; + }; + pctl_tsout_s3: pctl-tsout-s3 { /* Serial TS-out 3 */ + abilis,function = "mos3"; + }; + /* Port 7 */ + pctl_uart0: pctl-uart0 { /* UART 0 */ + abilis,function = "uart0"; + }; + pctl_uart1: pctl-uart1 { /* UART 1 */ + abilis,function = "uart1"; + }; + pctl_gpio_l: pctl-gpio-l { /* GPIO bank L */ + abilis,function = "gpiol"; + }; + pctl_gpio_m: pctl-gpio-m { /* GPIO bank M */ + abilis,function = "gpiom"; + }; + /* Port 8 */ + pctl_spi3: pctl-spi3 { + abilis,function = "spi3"; + }; + pctl_jtag: pctl-jtag { + abilis,function = "jtag"; + }; + /* Port 9 */ + pctl_spi1: pctl-spi1 { + abilis,function = "spi1"; + }; + pctl_gpio_n: pctl-gpio-n { + abilis,function = "gpion"; + }; + /* Unmuxed GPIOs */ + pctl_gpio_b: pctl-gpio-b { + abilis,function = "gpiob"; + }; + pctl_gpio_d: pctl-gpio-d { + abilis,function = "gpiod"; + }; + pctl_gpio_f: pctl-gpio-f { + abilis,function = "gpiof"; + }; + pctl_gpio_h: pctl-gpio-h { + abilis,function = "gpioh"; + }; + pctl_gpio_i: pctl-gpio-i { + abilis,function = "gpioi"; + }; + }; + + gpioa: gpio@ff140000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff140000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <3>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioa"; + }; + gpiob: gpio@ff141000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff141000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <2>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiob"; + }; + gpioc: gpio@ff142000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff142000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <3>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioc"; + }; + gpiod: gpio@ff143000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff143000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <2>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiod"; + }; + gpioe: gpio@ff144000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff144000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <3>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioe"; + }; + gpiof: gpio@ff145000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff145000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <2>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiof"; + }; + gpiog: gpio@ff146000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff146000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <3>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiog"; + }; + gpioh: gpio@ff147000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff147000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <2>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioh"; + }; + gpioi: gpio@ff148000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff148000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <12>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioi"; + }; + gpioj: gpio@ff149000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff149000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <32>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpioj"; + }; + gpiok: gpio@ff14a000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff14a000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <22>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiok"; + }; + gpiol: gpio@ff14b000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff14b000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <4>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiol"; + }; + gpiom: gpio@ff14c000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff14c000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <4>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpiom"; + }; + gpion: gpio@ff14d000 { + compatible = "abilis,tb10x-gpio"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <27 2>; + reg = <0xff14d000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + abilis,ngpio = <5>; + gpio-ranges = <&iomux 0 0 0>; + gpio-ranges-group-names = "gpion"; + }; + }; +}; diff --git a/arch/arc/boot/dts/abilis_tb101_dvk.dts b/arch/arc/boot/dts/abilis_tb101_dvk.dts new file mode 100644 index 000000000..d11b790f8 --- /dev/null +++ b/arch/arc/boot/dts/abilis_tb101_dvk.dts @@ -0,0 +1,116 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Abilis Systems TB101 Development Kit PCB device tree + * + * Copyright (C) Abilis Systems 2013 + * + * Author: Christian Ruppert <christian.ruppert@abilis.com> + */ + +/dts-v1/; + +/include/ "abilis_tb101.dtsi" + +/ { + model = "abilis,tb101"; + chosen { + bootargs = "earlycon=uart8250,mmio32,0xff100000,9600n8 console=ttyS0,9600n8"; + }; + + aliases { }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x08000000>; /* 128M */ + }; + + soc100 { + uart@ff100000 { + pinctrl-names = "default"; + pinctrl-0 = <&pctl_uart0>; + }; + ethernet@fe100000 { + phy-mode = "rgmii"; + }; + + i2c0: i2c@ff120000 { + i2c-sda-hold-time-ns = <432>; + }; + i2c1: i2c@ff121000 { + i2c-sda-hold-time-ns = <432>; + }; + i2c2: i2c@ff122000 { + i2c-sda-hold-time-ns = <432>; + }; + i2c3: i2c@ff123000 { + i2c-sda-hold-time-ns = <432>; + }; + i2c4: i2c@ff124000 { + i2c-sda-hold-time-ns = <432>; + }; + + leds { + compatible = "gpio-leds"; + power { + label = "Power"; + gpios = <&gpioi 0 0>; + linux,default-trigger = "default-on"; + }; + heartbeat { + label = "Heartbeat"; + gpios = <&gpioi 1 0>; + linux,default-trigger = "heartbeat"; + }; + led2 { + label = "LED2"; + gpios = <&gpioi 2 0>; + default-state = "off"; + }; + led3 { + label = "LED3"; + gpios = <&gpioi 3 0>; + default-state = "off"; + }; + led4 { + label = "LED4"; + gpios = <&gpioi 4 0>; + default-state = "off"; + }; + led5 { + label = "LED5"; + gpios = <&gpioi 5 0>; + default-state = "off"; + }; + led6 { + label = "LED6"; + gpios = <&gpioi 6 0>; + default-state = "off"; + }; + led7 { + label = "LED7"; + gpios = <&gpioi 7 0>; + default-state = "off"; + }; + led8 { + label = "LED8"; + gpios = <&gpioi 8 0>; + default-state = "off"; + }; + led9 { + label = "LED9"; + gpios = <&gpioi 9 0>; + default-state = "off"; + }; + led10 { + label = "LED10"; + gpios = <&gpioi 10 0>; + default-state = "off"; + }; + led11 { + label = "LED11"; + gpios = <&gpioi 11 0>; + default-state = "off"; + }; + }; + }; +}; diff --git a/arch/arc/boot/dts/abilis_tb10x.dtsi b/arch/arc/boot/dts/abilis_tb10x.dtsi new file mode 100644 index 000000000..aa62619f2 --- /dev/null +++ b/arch/arc/boot/dts/abilis_tb10x.dtsi @@ -0,0 +1,243 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Abilis Systems TB10X SOC device tree + * + * Copyright (C) Abilis Systems 2013 + * + * Author: Christian Ruppert <christian.ruppert@abilis.com> + */ + + +/ { + compatible = "abilis,arc-tb10x"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + device_type = "cpu"; + compatible = "snps,arc770d"; + reg = <0>; + }; + }; + + /* TIMER0 with interrupt for clockevent */ + timer0 { + compatible = "snps,arc-timer"; + interrupts = <3>; + interrupt-parent = <&intc>; + clocks = <&cpu_clk>; + }; + + /* TIMER1 for free running clocksource */ + timer1 { + compatible = "snps,arc-timer"; + clocks = <&cpu_clk>; + }; + + soc100 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + ranges = <0xfe000000 0xfe000000 0x02000000 + 0x000f0000 0x000f0000 0x00010000>; + compatible = "abilis,tb10x", "simple-bus"; + + pll0: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "pll0"; + }; + cpu_clk: clkdiv_cpu { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&pll0>; + clock-output-names = "cpu_clk"; + }; + ahb_clk: clkdiv_ahb { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clocks = <&pll0>; + clock-output-names = "ahb_clk"; + }; + + iomux: iomux@ff10601c { + compatible = "abilis,tb10x-iomux"; + #gpio-range-cells = <3>; + reg = <0xff10601c 0x4>; + }; + + intc: interrupt-controller { + compatible = "snps,arc700-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + tb10x_ictl: pic@fe002000 { + compatible = "abilis,tb10x-ictl"; + reg = <0xfe002000 0x20>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupts = <5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 30 31>; + }; + + uart@ff100000 { + compatible = "snps,dw-apb-uart"; + reg = <0xff100000 0x100>; + clock-frequency = <166666666>; + interrupts = <25 8>; + reg-shift = <2>; + reg-io-width = <4>; + interrupt-parent = <&tb10x_ictl>; + }; + ethernet@fe100000 { + compatible = "snps,dwmac-3.70a","snps,dwmac"; + reg = <0xfe100000 0x1058>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <6 8>; + interrupt-names = "macirq"; + clocks = <&ahb_clk>; + clock-names = "stmmaceth"; + }; + dma@fe000000 { + compatible = "snps,dma-spear1340"; + reg = <0xfe000000 0x400>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <14 8>; + dma-channels = <6>; + dma-requests = <0>; + dma-masters = <1>; + #dma-cells = <3>; + chan_allocation_order = <0>; + chan_priority = <1>; + block_size = <0x7ff>; + data-width = <4>; + clocks = <&ahb_clk>; + clock-names = "hclk"; + multi-block = <1 1 1 1 1 1>; + }; + + i2c0: i2c@ff120000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xff120000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <12 8>; + clocks = <&ahb_clk>; + }; + i2c1: i2c@ff121000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xff121000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <12 8>; + clocks = <&ahb_clk>; + }; + i2c2: i2c@ff122000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xff122000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <12 8>; + clocks = <&ahb_clk>; + }; + i2c3: i2c@ff123000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xff123000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <12 8>; + clocks = <&ahb_clk>; + }; + i2c4: i2c@ff124000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xff124000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <12 8>; + clocks = <&ahb_clk>; + }; + + spi0: spi@fe010000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "abilis,tb100-spi"; + num-cs = <1>; + reg = <0xfe010000 0x20>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <26 8>; + clocks = <&ahb_clk>; + }; + spi1: spi@fe011000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + compatible = "abilis,tb100-spi"; + num-cs = <2>; + reg = <0xfe011000 0x20>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <10 8>; + clocks = <&ahb_clk>; + }; + + tb10x_tsm: tb10x-tsm@ff316000 { + compatible = "abilis,tb100-tsm"; + reg = <0xff316000 0x400>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <17 8>; + output-clkdiv = <4>; + global-packet-delay = <0x21>; + port-packet-delay = <0>; + }; + tb10x_stream_proc: tb10x-stream-proc { + compatible = "abilis,tb100-streamproc"; + reg = <0xfff00000 0x200>, + <0x000f0000 0x10000>, + <0xfff00200 0x105>, + <0xff10600c 0x1>, + <0xfe001018 0x1>; + reg-names = "mbox", + "sp_iccm", + "mbox_irq", + "cpuctrl", + "a6it_int_force"; + interrupt-parent = <&tb10x_ictl>; + interrupts = <20 2>, <19 2>; + interrupt-names = "cmd_irq", "event_irq"; + }; + tb10x_mdsc0: tb10x-mdscr@ff300000 { + compatible = "abilis,tb100-mdscr"; + reg = <0xff300000 0x7000>; + tb100-mdscr-manage-tsin; + }; + tb10x_mscr0: tb10x-mdscr@ff307000 { + compatible = "abilis,tb100-mdscr"; + reg = <0xff307000 0x7000>; + }; + tb10x_scr0: tb10x-mdscr@ff30e000 { + compatible = "abilis,tb100-mdscr"; + reg = <0xff30e000 0x4000>; + tb100-mdscr-manage-tsin; + }; + tb10x_scr1: tb10x-mdscr@ff312000 { + compatible = "abilis,tb100-mdscr"; + reg = <0xff312000 0x4000>; + tb100-mdscr-manage-tsin; + }; + tb10x_wfb: tb10x-wfb@ff319000 { + compatible = "abilis,tb100-wfb"; + reg = <0xff319000 0x1000>; + interrupt-parent = <&tb10x_ictl>; + interrupts = <16 8>; + }; + }; +}; diff --git a/arch/arc/boot/dts/axc001.dtsi b/arch/arc/boot/dts/axc001.dtsi new file mode 100644 index 000000000..2a151607b --- /dev/null +++ b/arch/arc/boot/dts/axc001.dtsi @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com) + */ + +/* + * Device tree for AXC001 770D/EM6/AS221 CPU card + * Note that this file only supports the 770D CPU + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "snps,arc"; + #address-cells = <2>; + #size-cells = <2>; + + cpu_card { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x00000000 0x0 0xf0000000 0x10000000>; + + core_clk: core_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <750000000>; + }; + + input_clk: input-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <33333333>; + }; + + core_intc: arc700-intc@cpu { + compatible = "snps,arc700-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + /* + * this GPIO block ORs all interrupts on CPU card (creg,..) + * to uplink only 1 IRQ to ARC core intc + */ + dw-apb-gpio@2000 { + compatible = "snps,dw-apb-gpio"; + reg = < 0x2000 0x80 >; + #address-cells = <1>; + #size-cells = <0>; + + ictl_intc: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <30>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&core_intc>; + interrupts = <15>; + }; + }; + + debug_uart: dw-apb-uart@5000 { + compatible = "snps,dw-apb-uart"; + reg = <0x5000 0x100>; + clock-frequency = <33333000>; + interrupt-parent = <&ictl_intc>; + interrupts = <19 4>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + arcpct0: pct { + compatible = "snps,arc700-pct"; + }; + }; + + /* + * This INTC is actually connected to DW APB GPIO + * which acts as a wire between MB INTC and CPU INTC. + * GPIO INTC is configured in platform init code + * and here we mimic direct connection from MB INTC to + * CPU INTC, thus we set "interrupts = <7>" instead of + * "interrupts = <12>" + * + * This intc actually resides on MB, but we move it here to + * avoid duplicating the MB dtsi file given that IRQ from + * this intc to cpu intc are different for axs101 and axs103 + */ + mb_intc: interrupt-controller@e0012000 { + #interrupt-cells = <1>; + compatible = "snps,dw-apb-ictl"; + reg = < 0x0 0xe0012000 0x0 0x200 >; + interrupt-controller; + interrupt-parent = <&core_intc>; + interrupts = < 7 >; + }; + + memory { + device_type = "memory"; + /* CONFIG_LINUX_RAM_BASE needs to match low mem start */ + reg = <0x0 0x80000000 0x0 0x1b000000>; /* (512 - 32) MiB */ + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + /* + * We just move frame buffer area to the very end of + * available DDR. And even though in case of ARC770 there's + * no strict requirement for a frame-buffer to be in any + * particular location it allows us to use the same + * base board's DT node for ARC PGU as for ARc HS38. + */ + frame_buffer: frame_buffer@9e000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9e000000 0x0 0x2000000>; + no-map; + }; + }; +}; diff --git a/arch/arc/boot/dts/axc003.dtsi b/arch/arc/boot/dts/axc003.dtsi new file mode 100644 index 000000000..cd1edcf4f --- /dev/null +++ b/arch/arc/boot/dts/axc003.dtsi @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + */ + +/* + * Device tree for AXC003 CPU card: HS38x UP configuration + */ + +/include/ "skeleton_hs.dtsi" + +/ { + compatible = "snps,arc"; + #address-cells = <2>; + #size-cells = <2>; + + cpu_card { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x00000000 0x0 0xf0000000 0x10000000>; + + input_clk: input-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <33333333>; + }; + + core_clk: core-clk@80 { + compatible = "snps,axs10x-arc-pll-clock"; + reg = <0x80 0x10>, <0x100 0x10>; + #clock-cells = <0>; + clocks = <&input_clk>; + + /* + * Set initial core pll output frequency to 90MHz. + * It will be applied at the core pll driver probing + * on early boot. + */ + assigned-clocks = <&core_clk>; + assigned-clock-rates = <90000000>; + }; + + core_intc: archs-intc@cpu { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + /* + * this GPIO block ORs all interrupts on CPU card (creg,..) + * to uplink only 1 IRQ to ARC core intc + */ + dw-apb-gpio@2000 { + compatible = "snps,dw-apb-gpio"; + reg = < 0x2000 0x80 >; + #address-cells = <1>; + #size-cells = <0>; + + ictl_intc: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <30>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&core_intc>; + interrupts = <25>; + }; + }; + + debug_uart: dw-apb-uart@5000 { + compatible = "snps,dw-apb-uart"; + reg = <0x5000 0x100>; + clock-frequency = <33333000>; + interrupt-parent = <&ictl_intc>; + interrupts = <2 4>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + arcpct0: pct { + compatible = "snps,archs-pct"; + #interrupt-cells = <1>; + interrupt-parent = <&core_intc>; + interrupts = <20>; + }; + }; + + /* + * Mark DMA peripherals connected via IOC port as dma-coherent. We do + * it via overlay because peripherals defined in axs10x_mb.dtsi are + * used for both AXS101 and AXS103 boards and only AXS103 has IOC (so + * only AXS103 board has HW-coherent DMA peripherals) + * We don't need to mark pgu@17000 as dma-coherent because it uses + * external DMA buffer located outside of IOC aperture. + */ + axs10x_mb { + ethernet@18000 { + dma-coherent; + }; + + ehci@40000 { + dma-coherent; + }; + + ohci@60000 { + dma-coherent; + }; + + mmc@15000 { + dma-coherent; + }; + }; + + /* + * The DW APB ICTL intc on MB is connected to CPU intc via a + * DT "invisible" DW APB GPIO block, configured to simply pass thru + * interrupts - setup accordinly in platform init (plat-axs10x/ax10x.c) + * + * So here we mimic a direct connection betwen them, ignoring the + * ABPG GPIO. Thus set "interrupts = <24>" (DW APB GPIO to core) + * instead of "interrupts = <12>" (DW APB ICTL to DW APB GPIO) + * + * This intc actually resides on MB, but we move it here to + * avoid duplicating the MB dtsi file given that IRQ from + * this intc to cpu intc are different for axs101 and axs103 + */ + mb_intc: interrupt-controller@e0012000 { + #interrupt-cells = <1>; + compatible = "snps,dw-apb-ictl"; + reg = < 0x0 0xe0012000 0x0 0x200 >; + interrupt-controller; + interrupt-parent = <&core_intc>; + interrupts = < 24 >; + }; + + memory { + device_type = "memory"; + /* CONFIG_LINUX_RAM_BASE needs to match low mem start */ + reg = <0x0 0x80000000 0x0 0x20000000 /* 512 MiB low mem */ + 0x1 0xc0000000 0x0 0x40000000>; /* 1 GiB highmem */ + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + /* + * Move frame buffer out of IOC aperture (0x8z-0xaz). + */ + frame_buffer: frame_buffer@be000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xbe000000 0x0 0x2000000>; + no-map; + }; + }; +}; diff --git a/arch/arc/boot/dts/axc003_idu.dtsi b/arch/arc/boot/dts/axc003_idu.dtsi new file mode 100644 index 000000000..70779386c --- /dev/null +++ b/arch/arc/boot/dts/axc003_idu.dtsi @@ -0,0 +1,167 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2014, 2015 Synopsys, Inc. (www.synopsys.com) + */ + +/* + * Device tree for AXC003 CPU card: HS38x2 (Dual Core) with IDU intc + */ + +/include/ "skeleton_hs_idu.dtsi" + +/ { + compatible = "snps,arc"; + #address-cells = <2>; + #size-cells = <2>; + + cpu_card { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x00000000 0x0 0xf0000000 0x10000000>; + + input_clk: input-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <33333333>; + }; + + core_clk: core-clk@80 { + compatible = "snps,axs10x-arc-pll-clock"; + reg = <0x80 0x10>, <0x100 0x10>; + #clock-cells = <0>; + clocks = <&input_clk>; + + /* + * Set initial core pll output frequency to 100MHz. + * It will be applied at the core pll driver probing + * on early boot. + */ + assigned-clocks = <&core_clk>; + assigned-clock-rates = <100000000>; + }; + + core_intc: archs-intc@cpu { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + idu_intc: idu-interrupt-controller { + compatible = "snps,archs-idu-intc"; + interrupt-controller; + interrupt-parent = <&core_intc>; + #interrupt-cells = <1>; + }; + + /* + * this GPIO block ORs all interrupts on CPU card (creg,..) + * to uplink only 1 IRQ to ARC core intc + */ + dw-apb-gpio@2000 { + compatible = "snps,dw-apb-gpio"; + reg = < 0x2000 0x80 >; + #address-cells = <1>; + #size-cells = <0>; + + ictl_intc: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <30>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&idu_intc>; + interrupts = <1>; + }; + }; + + debug_uart: dw-apb-uart@5000 { + compatible = "snps,dw-apb-uart"; + reg = <0x5000 0x100>; + clock-frequency = <33333000>; + interrupt-parent = <&ictl_intc>; + interrupts = <2 4>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + arcpct0: pct { + compatible = "snps,archs-pct"; + #interrupt-cells = <1>; + interrupt-parent = <&core_intc>; + interrupts = <20>; + }; + }; + + /* + * Mark DMA peripherals connected via IOC port as dma-coherent. We do + * it via overlay because peripherals defined in axs10x_mb.dtsi are + * used for both AXS101 and AXS103 boards and only AXS103 has IOC (so + * only AXS103 board has HW-coherent DMA peripherals) + * We don't need to mark pgu@17000 as dma-coherent because it uses + * external DMA buffer located outside of IOC aperture. + */ + axs10x_mb { + ethernet@18000 { + dma-coherent; + }; + + ehci@40000 { + dma-coherent; + }; + + ohci@60000 { + dma-coherent; + }; + + mmc@15000 { + dma-coherent; + }; + }; + + /* + * This INTC is actually connected to DW APB GPIO + * which acts as a wire between MB INTC and CPU INTC. + * GPIO INTC is configured in platform init code + * and here we mimic direct connection from MB INTC to + * CPU INTC, thus we set "interrupts = <0 1>" instead of + * "interrupts = <12>" + * + * This intc actually resides on MB, but we move it here to + * avoid duplicating the MB dtsi file given that IRQ from + * this intc to cpu intc are different for axs101 and axs103 + */ + mb_intc: interrupt-controller@e0012000 { + #interrupt-cells = <1>; + compatible = "snps,dw-apb-ictl"; + reg = < 0x0 0xe0012000 0x0 0x200 >; + interrupt-controller; + interrupt-parent = <&idu_intc>; + interrupts = <0>; + }; + + memory { + device_type = "memory"; + /* CONFIG_LINUX_RAM_BASE needs to match low mem start */ + reg = <0x0 0x80000000 0x0 0x20000000 /* 512 MiB low mem */ + 0x1 0xc0000000 0x0 0x40000000>; /* 1 GiB highmem */ + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + /* + * Move frame buffer out of IOC aperture (0x8z-0xaz). + */ + frame_buffer: frame_buffer@be000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xbe000000 0x0 0x2000000>; + no-map; + }; + }; +}; diff --git a/arch/arc/boot/dts/axs101.dts b/arch/arc/boot/dts/axs101.dts new file mode 100644 index 000000000..c4cfc5f4f --- /dev/null +++ b/arch/arc/boot/dts/axs101.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com) + * + * ARC AXS101 S/W development platform + */ +/dts-v1/; + +/include/ "axc001.dtsi" +/include/ "axs10x_mb.dtsi" + +/ { + model = "snps,axs101"; + compatible = "snps,axs101", "snps,arc-sdp"; + + chosen { + bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 print-fatal-signals=1"; + }; +}; diff --git a/arch/arc/boot/dts/axs103.dts b/arch/arc/boot/dts/axs103.dts new file mode 100644 index 000000000..16ccb7ba7 --- /dev/null +++ b/arch/arc/boot/dts/axs103.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + */ + +/* + * Device Tree for AXS103 SDP with AXS10X Main Board and + * AXC003 FPGA Card (with UP bitfile) + */ +/dts-v1/; + +/include/ "axc003.dtsi" +/include/ "axs10x_mb.dtsi" + +/ { + model = "snps,axs103"; + compatible = "snps,axs103", "snps,arc-sdp"; + + chosen { + bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=ttyS3,115200n8 debug print-fatal-signals=1"; + }; +}; diff --git a/arch/arc/boot/dts/axs103_idu.dts b/arch/arc/boot/dts/axs103_idu.dts new file mode 100644 index 000000000..a934b92a8 --- /dev/null +++ b/arch/arc/boot/dts/axs103_idu.dts @@ -0,0 +1,22 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + */ + +/* + * Device Tree for AXS103 SDP with AXS10X Main Board and + * AXC003 FPGA Card (with SMP bitfile) + */ +/dts-v1/; + +/include/ "axc003_idu.dtsi" +/include/ "axs10x_mb.dtsi" + +/ { + model = "snps,axs103-smp"; + compatible = "snps,axs103", "snps,arc-sdp"; + + chosen { + bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 print-fatal-signals=1 consoleblank=0"; + }; +}; diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi new file mode 100644 index 000000000..99d3e7175 --- /dev/null +++ b/arch/arc/boot/dts/axs10x_mb.dtsi @@ -0,0 +1,330 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Support for peripherals on the AXS10x mainboard + * + * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com) + */ + +/ { + aliases { + ethernet = &gmac; + }; + + axs10x_mb { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x0 0xe0000000 0x10000000>; + interrupt-parent = <&mb_intc>; + + creg_rst: reset-controller@11220 { + compatible = "snps,axs10x-reset"; + #reset-cells = <1>; + reg = <0x11220 0x4>; + }; + + i2sclk: i2sclk@100a0 { + compatible = "snps,axs10x-i2s-pll-clock"; + reg = <0x100a0 0x10>; + clocks = <&i2spll_clk>; + #clock-cells = <0>; + }; + + clocks { + i2spll_clk: i2spll_clk { + compatible = "fixed-clock"; + clock-frequency = <27000000>; + #clock-cells = <0>; + }; + + i2cclk: i2cclk { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + #clock-cells = <0>; + }; + + apbclk: apbclk { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + #clock-cells = <0>; + }; + + mmcclk: mmcclk { + compatible = "fixed-clock"; + /* + * DW sdio controller has external ciu clock divider + * controlled via register in SDIO IP. It divides + * sdio_ref_clk (which comes from CGU) by 16 for + * default. So default mmcclk clock (which comes + * to sdk_in) is 25000000 Hz. + */ + clock-frequency = <25000000>; + #clock-cells = <0>; + }; + }; + + pguclk: pguclk@10080 { + compatible = "snps,axs10x-pgu-pll-clock"; + reg = <0x10080 0x10>, <0x110 0x10>; + #clock-cells = <0>; + clocks = <&input_clk>; + }; + + gmac: ethernet@18000 { + #interrupt-cells = <1>; + compatible = "snps,dwmac"; + reg = < 0x18000 0x2000 >; + interrupts = < 4 >; + interrupt-names = "macirq"; + phy-mode = "rgmii"; + snps,pbl = < 32 >; + snps,multicast-filter-bins = <256>; + clocks = <&apbclk>; + clock-names = "stmmaceth"; + max-speed = <100>; + resets = <&creg_rst 5>; + reset-names = "stmmaceth"; + mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */ + }; + + ehci@40000 { + compatible = "generic-ehci"; + reg = < 0x40000 0x100 >; + interrupts = < 8 >; + }; + + ohci@60000 { + compatible = "generic-ohci"; + reg = < 0x60000 0x100 >; + interrupts = < 8 >; + }; + + /* + * According to DW Mobile Storage databook it is required + * to use "Hold Register" if card is enumerated in SDR12 or + * SDR25 modes. + * + * Utilization of "Hold Register" is already implemented via + * dw_mci_pltfm_prepare_command() which in its turn gets + * used through dw_mci_drv_data->prepare_command call-back. + * This call-back is used in Altera Socfpga platform and so + * we may reuse it saying that we're compatible with their + * "altr,socfpga-dw-mshc". + * + * Most probably "Hold Register" utilization is platform- + * independent requirement which means that single unified + * "snps,dw-mshc" should be enough for all users of DW MMC once + * dw_mci_pltfm_prepare_command() is used in generic platform + * code. + */ + mmc@15000 { + compatible = "altr,socfpga-dw-mshc"; + reg = < 0x15000 0x400 >; + fifo-depth = < 16 >; + card-detect-delay = < 200 >; + clocks = <&apbclk>, <&mmcclk>; + clock-names = "biu", "ciu"; + interrupts = < 7 >; + bus-width = < 4 >; + }; + + uart@20000 { + compatible = "snps,dw-apb-uart"; + reg = <0x20000 0x100>; + clock-frequency = <33333333>; + interrupts = <17>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + uart@21000 { + compatible = "snps,dw-apb-uart"; + reg = <0x21000 0x100>; + clock-frequency = <33333333>; + interrupts = <18>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + /* UART muxed with USB data port (ttyS3) */ + uart@22000 { + compatible = "snps,dw-apb-uart"; + reg = <0x22000 0x100>; + clock-frequency = <33333333>; + interrupts = <19>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + i2c@1d000 { + compatible = "snps,designware-i2c"; + reg = <0x1d000 0x100>; + clock-frequency = <400000>; + clocks = <&i2cclk>; + interrupts = <14>; + }; + + i2s: i2s@1e000 { + compatible = "snps,designware-i2s"; + reg = <0x1e000 0x100>; + clocks = <&i2sclk 0>; + clock-names = "i2sclk"; + interrupts = <15>; + #sound-dai-cells = <0>; + }; + + i2c@1f000 { + compatible = "snps,designware-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1f000 0x100>; + clock-frequency = <400000>; + clocks = <&i2cclk>; + interrupts = <16>; + + adv7511:adv7511@39{ + compatible="adi,adv7511"; + reg = <0x39>; + interrupts = <23>; + adi,input-depth = <8>; + adi,input-colorspace = "rgb"; + adi,input-clock = "1x"; + adi,clock-delay = <0x03>; + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* RGB/YUV input */ + port@0 { + reg = <0>; + adv7511_input:endpoint { + remote-endpoint = <&pgu_output>; + }; + }; + + /* HDMI output */ + port@1 { + reg = <1>; + adv7511_output: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + + eeprom@54{ + compatible = "atmel,24c01"; + reg = <0x54>; + pagesize = <0x8>; + }; + + eeprom@57{ + compatible = "atmel,24c04"; + reg = <0x57>; + pagesize = <0x8>; + }; + }; + + hdmi0: connector { + compatible = "hdmi-connector"; + type = "a"; + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&adv7511_output>; + }; + }; + }; + + gpio0:gpio@13000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x13000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + gpio0_banka: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + }; + + gpio0_bankb: gpio-controller@1 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <1>; + }; + + gpio0_bankc: gpio-controller@2 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <2>; + }; + }; + + gpio1:gpio@14000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x14000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + gpio1_banka: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <30>; + reg = <0>; + }; + + gpio1_bankb: gpio-controller@1 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <10>; + reg = <1>; + }; + + gpio1_bankc: gpio-controller@2 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <8>; + reg = <2>; + }; + }; + + pgu@17000 { + compatible = "snps,arcpgu"; + reg = <0x17000 0x400>; + clocks = <&pguclk>; + clock-names = "pxlclk"; + memory-region = <&frame_buffer>; + port { + pgu_output: endpoint { + remote-endpoint = <&adv7511_input>; + }; + }; + }; + + sound_playback { + compatible = "simple-audio-card"; + simple-audio-card,name = "AXS10x HDMI Audio"; + simple-audio-card,format = "i2s"; + simple-audio-card,cpu { + sound-dai = <&i2s>; + }; + simple-audio-card,codec { + sound-dai = <&adv7511>; + }; + }; + }; +}; diff --git a/arch/arc/boot/dts/haps_hs.dts b/arch/arc/boot/dts/haps_hs.dts new file mode 100644 index 000000000..60d578e27 --- /dev/null +++ b/arch/arc/boot/dts/haps_hs.dts @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2016-2014 Synopsys, Inc. (www.synopsys.com) + */ +/dts-v1/; + +/include/ "skeleton_hs.dtsi" + +/ { + model = "snps,zebu_hs"; + compatible = "snps,zebu_hs"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&core_intc>; + + memory { + device_type = "memory"; + /* CONFIG_LINUX_RAM_BASE needs to match low mem start */ + reg = <0x0 0x80000000 0x0 0x20000000 /* 512 MB low mem */ + 0x1 0x00000000 0x0 0x40000000>; /* 1 GB highmem */ + }; + + chosen { + bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1"; + }; + + aliases { + serial0 = &uart0; + }; + + fpga { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + /* only perip space at end of low mem accessible + bus addr, parent bus addr, size */ + ranges = <0x80000000 0x0 0x80000000 0x80000000>; + + core_clk: core_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + + core_intc: interrupt-controller { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uart0: serial@f0000000 { + compatible = "ns16550a"; + reg = <0xf0000000 0x2000>; + interrupts = <24>; + clock-frequency = <50000000>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + no-loopback-test = <1>; + }; + + arcpct0: pct { + compatible = "snps,archs-pct"; + #interrupt-cells = <1>; + interrupts = <20>; + }; + + virtio0: virtio@f0100000 { + compatible = "virtio,mmio"; + reg = <0xf0100000 0x2000>; + interrupts = <31>; + }; + + virtio1: virtio@f0102000 { + compatible = "virtio,mmio"; + reg = <0xf0102000 0x2000>; + interrupts = <32>; + }; + + virtio2: virtio@f0104000 { + compatible = "virtio,mmio"; + reg = <0xf0104000 0x2000>; + interrupts = <33>; + }; + + virtio3: virtio@f0106000 { + compatible = "virtio,mmio"; + reg = <0xf0106000 0x2000>; + interrupts = <34>; + }; + + virtio4: virtio@f0108000 { + compatible = "virtio,mmio"; + reg = <0xf0108000 0x2000>; + interrupts = <35>; + }; + }; +}; diff --git a/arch/arc/boot/dts/haps_hs_idu.dts b/arch/arc/boot/dts/haps_hs_idu.dts new file mode 100644 index 000000000..738c76cd0 --- /dev/null +++ b/arch/arc/boot/dts/haps_hs_idu.dts @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2016-2014 Synopsys, Inc. (www.synopsys.com) + */ +/dts-v1/; + +/include/ "skeleton_hs_idu.dtsi" + +/ { + model = "snps,zebu_hs-smp"; + compatible = "snps,zebu_hs"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&core_intc>; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 */ + }; + + chosen { + bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1"; + }; + + aliases { + serial0 = &uart0; + }; + + fpga { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + /* child and parent address space 1:1 mapped */ + ranges; + + core_clk: core_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; /* 50 MHZ */ + }; + + core_intc: interrupt-controller { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + idu_intc: idu-interrupt-controller { + compatible = "snps,archs-idu-intc"; + interrupt-controller; + interrupt-parent = <&core_intc>; + #interrupt-cells = <1>; + }; + + uart0: serial@f0000000 { + compatible = "ns16550a"; + reg = <0xf0000000 0x2000>; + interrupt-parent = <&idu_intc>; + interrupts = <0>; + clock-frequency = <50000000>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + no-loopback-test = <1>; + }; + + arcpct0: pct { + compatible = "snps,archs-pct"; + #interrupt-cells = <1>; + interrupts = <20>; + }; + }; +}; diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts new file mode 100644 index 000000000..dcaa44e40 --- /dev/null +++ b/arch/arc/boot/dts/hsdk.dts @@ -0,0 +1,351 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2017 Synopsys, Inc. (www.synopsys.com) + */ + +/* + * Device Tree for ARC HS Development Kit + */ +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/reset/snps,hsdk-reset.h> + +/ { + model = "snps,hsdk"; + compatible = "snps,hsdk"; + + #address-cells = <2>; + #size-cells = <2>; + + chosen { + bootargs = "earlycon=uart8250,mmio32,0xf0005000,115200n8 console=ttyS0,115200n8 debug print-fatal-signals=1"; + }; + + aliases { + ethernet = &gmac; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "snps,archs38"; + reg = <0>; + clocks = <&core_clk>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "snps,archs38"; + reg = <1>; + clocks = <&core_clk>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "snps,archs38"; + reg = <2>; + clocks = <&core_clk>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "snps,archs38"; + reg = <3>; + clocks = <&core_clk>; + }; + }; + + input_clk: input-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <33333333>; + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + + regulator-name = "5v0-supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + cpu_intc: cpu-interrupt-controller { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + idu_intc: idu-interrupt-controller { + compatible = "snps,archs-idu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&cpu_intc>; + }; + + arcpct: pct { + compatible = "snps,archs-pct"; + interrupt-parent = <&cpu_intc>; + interrupts = <20>; + }; + + /* TIMER0 with interrupt for clockevent */ + timer { + compatible = "snps,arc-timer"; + interrupts = <16>; + interrupt-parent = <&cpu_intc>; + clocks = <&core_clk>; + }; + + /* 64-bit Global Free Running Counter */ + gfrc { + compatible = "snps,archs-timer-gfrc"; + clocks = <&core_clk>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&idu_intc>; + + ranges = <0x00000000 0x0 0xf0000000 0x10000000>; + + cgu_rst: reset-controller@8a0 { + compatible = "snps,hsdk-reset"; + #reset-cells = <1>; + reg = <0x8a0 0x4>, <0xff0 0x4>; + }; + + core_clk: core-clk@0 { + compatible = "snps,hsdk-core-pll-clock"; + reg = <0x00 0x10>, <0x14b8 0x4>; + #clock-cells = <0>; + clocks = <&input_clk>; + + /* + * Set initial core pll output frequency to 1GHz. + * It will be applied at the core pll driver probing + * on early boot. + */ + assigned-clocks = <&core_clk>; + assigned-clock-rates = <1000000000>; + }; + + serial: serial@5000 { + compatible = "snps,dw-apb-uart"; + reg = <0x5000 0x100>; + clock-frequency = <33330000>; + interrupts = <6>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + gmacclk: gmacclk { + compatible = "fixed-clock"; + clock-frequency = <400000000>; + #clock-cells = <0>; + }; + + mmcclk_ciu: mmcclk-ciu { + compatible = "fixed-clock"; + /* + * DW sdio controller has external ciu clock divider + * controlled via register in SDIO IP. Due to its + * unexpected default value (it should divide by 1 + * but it divides by 8) SDIO IP uses wrong clock and + * works unstable (see STAR 9001204800) + * We switched to the minimum possible value of the + * divisor (div-by-2) in HSDK platform code. + * So add temporary fix and change clock frequency + * to 50000000 Hz until we fix dw sdio driver itself. + */ + clock-frequency = <50000000>; + #clock-cells = <0>; + }; + + mmcclk_biu: mmcclk-biu { + compatible = "fixed-clock"; + clock-frequency = <400000000>; + #clock-cells = <0>; + }; + + gpu_core_clk: gpu-core-clk { + compatible = "fixed-clock"; + clock-frequency = <400000000>; + #clock-cells = <0>; + }; + + gpu_dma_clk: gpu-dma-clk { + compatible = "fixed-clock"; + clock-frequency = <400000000>; + #clock-cells = <0>; + }; + + gpu_cfg_clk: gpu-cfg-clk { + compatible = "fixed-clock"; + clock-frequency = <200000000>; + #clock-cells = <0>; + }; + + dmac_core_clk: dmac-core-clk { + compatible = "fixed-clock"; + clock-frequency = <400000000>; + #clock-cells = <0>; + }; + + dmac_cfg_clk: dmac-gpu-cfg-clk { + compatible = "fixed-clock"; + clock-frequency = <200000000>; + #clock-cells = <0>; + }; + + gmac: ethernet@8000 { + #interrupt-cells = <1>; + compatible = "snps,dwmac"; + reg = <0x8000 0x2000>; + interrupts = <10>; + interrupt-names = "macirq"; + phy-mode = "rgmii-id"; + snps,pbl = <32>; + snps,multicast-filter-bins = <256>; + clocks = <&gmacclk>; + clock-names = "stmmaceth"; + phy-handle = <&phy0>; + resets = <&cgu_rst HSDK_ETH_RESET>; + reset-names = "stmmaceth"; + mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */ + dma-coherent; + + tx-fifo-depth = <4096>; + rx-fifo-depth = <4096>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy@0 { /* Micrel KSZ9031 */ + reg = <0>; + }; + }; + }; + + ohci@60000 { + compatible = "snps,hsdk-v1.0-ohci", "generic-ohci"; + reg = <0x60000 0x100>; + interrupts = <15>; + resets = <&cgu_rst HSDK_USB_RESET>; + dma-coherent; + }; + + ehci@40000 { + compatible = "snps,hsdk-v1.0-ehci", "generic-ehci"; + reg = <0x40000 0x100>; + interrupts = <15>; + resets = <&cgu_rst HSDK_USB_RESET>; + dma-coherent; + }; + + mmc@a000 { + compatible = "altr,socfpga-dw-mshc"; + reg = <0xa000 0x400>; + num-slots = <1>; + fifo-depth = <16>; + card-detect-delay = <200>; + clocks = <&mmcclk_biu>, <&mmcclk_ciu>; + clock-names = "biu", "ciu"; + interrupts = <12>; + bus-width = <4>; + dma-coherent; + }; + + spi0: spi@20000 { + compatible = "snps,dw-apb-ssi"; + reg = <0x20000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <16>; + num-cs = <2>; + reg-io-width = <4>; + clocks = <&input_clk>; + cs-gpios = <&creg_gpio 0 GPIO_ACTIVE_LOW>, + <&creg_gpio 1 GPIO_ACTIVE_LOW>; + + spi-flash@0 { + compatible = "sst26wf016b", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <4000000>; + }; + + adc@1 { + compatible = "ti,adc108s102"; + reg = <1>; + vref-supply = <®_5v0>; + spi-max-frequency = <1000000>; + }; + }; + + creg_gpio: gpio@14b0 { + compatible = "snps,creg-gpio-hsdk"; + reg = <0x14b0 0x4>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <2>; + }; + + gpio: gpio@3000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x3000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + + gpio_port_a: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <24>; + reg = <0>; + }; + }; + + gpu_3d: gpu@90000 { + compatible = "vivante,gc"; + reg = <0x90000 0x4000>; + clocks = <&gpu_dma_clk>, + <&gpu_cfg_clk>, + <&gpu_core_clk>, + <&gpu_core_clk>; + clock-names = "bus", "reg", "core", "shader"; + interrupts = <28>; + }; + + dmac: dmac@80000 { + compatible = "snps,axi-dma-1.01a"; + reg = <0x80000 0x400>; + interrupts = <27>; + clocks = <&dmac_core_clk>, <&dmac_cfg_clk>; + clock-names = "core-clk", "cfgr-clk"; + + dma-channels = <4>; + snps,dma-masters = <2>; + snps,data-width = <3>; + snps,block-size = <4096 4096 4096 4096>; + snps,priority = <0 1 2 3>; + snps,axi-max-burst-len = <16>; + }; + }; + + memory@80000000 { + #address-cells = <2>; + #size-cells = <2>; + device_type = "memory"; + reg = <0x0 0x80000000 0x0 0x40000000>; /* 1 GB lowmem */ + /* 0x1 0x00000000 0x0 0x40000000>; 1 GB highmem */ + }; +}; diff --git a/arch/arc/boot/dts/nsim_700.dts b/arch/arc/boot/dts/nsim_700.dts new file mode 100644 index 000000000..f8832a15e --- /dev/null +++ b/arch/arc/boot/dts/nsim_700.dts @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com) + */ +/dts-v1/; + +/include/ "skeleton.dtsi" + +/ { + model = "snps,nsim"; + compatible = "snps,nsim"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&core_intc>; + + chosen { + bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=ttyS0,115200n8 print-fatal-signals=1"; + }; + + aliases { + serial0 = &uart0; + }; + + fpga { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + /* child and parent address space 1:1 mapped */ + ranges; + + core_clk: core_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <80000000>; + }; + + core_intc: interrupt-controller { + compatible = "snps,arc700-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uart0: serial@f0000000 { + compatible = "ns16550a"; + reg = <0xf0000000 0x2000>; + interrupts = <24>; + clock-frequency = <50000000>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + no-loopback-test = <1>; + }; + + arcpct0: pct { + compatible = "snps,arc700-pct"; + }; + }; +}; diff --git a/arch/arc/boot/dts/nsimosci.dts b/arch/arc/boot/dts/nsimosci.dts new file mode 100644 index 000000000..fc207c4a4 --- /dev/null +++ b/arch/arc/boot/dts/nsimosci.dts @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com) + */ +/dts-v1/; + +/include/ "skeleton.dtsi" + +/ { + model = "snps,nsimosci"; + compatible = "snps,nsimosci"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&core_intc>; + + chosen { + /* this is for console on PGU */ + /* bootargs = "console=tty0 consoleblank=0"; */ + /* this is for console on serial */ + bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24 print-fatal-signals=1"; + }; + + aliases { + serial0 = &uart0; + }; + + fpga { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + /* child and parent address space 1:1 mapped */ + ranges; + + core_clk: core_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <20000000>; + }; + + core_intc: interrupt-controller { + compatible = "snps,arc700-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uart0: serial@f0000000 { + compatible = "ns8250"; + reg = <0xf0000000 0x2000>; + interrupts = <11>; + clock-frequency = <3686400>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + no-loopback-test = <1>; + }; + + pguclk: pguclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25175000>; + }; + + pgu@f9000000 { + compatible = "snps,arcpgu"; + reg = <0xf9000000 0x400>; + clocks = <&pguclk>; + clock-names = "pxlclk"; + }; + + ps2: ps2@f9001000 { + compatible = "snps,arc_ps2"; + reg = <0xf9000400 0x14>; + interrupts = <13>; + interrupt-names = "arc_ps2_irq"; + }; + + eth0: ethernet@f0003000 { + compatible = "ezchip,nps-mgt-enet"; + reg = <0xf0003000 0x44>; + interrupts = <7>; + }; + + arcpct0: pct { + compatible = "snps,arc700-pct"; + }; + }; +}; diff --git a/arch/arc/boot/dts/nsimosci_hs.dts b/arch/arc/boot/dts/nsimosci_hs.dts new file mode 100644 index 000000000..71f1f8416 --- /dev/null +++ b/arch/arc/boot/dts/nsimosci_hs.dts @@ -0,0 +1,90 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + */ +/dts-v1/; + +/include/ "skeleton_hs.dtsi" + +/ { + model = "snps,nsimosci_hs"; + compatible = "snps,nsimosci_hs"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&core_intc>; + + chosen { + /* this is for console on PGU */ + /* bootargs = "console=tty0 consoleblank=0"; */ + /* this is for console on serial */ + bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug video=640x480-24 print-fatal-signals=1"; + }; + + aliases { + serial0 = &uart0; + }; + + fpga { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + /* child and parent address space 1:1 mapped */ + ranges; + + core_clk: core_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <20000000>; + }; + + core_intc: core-interrupt-controller { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uart0: serial@f0000000 { + compatible = "ns8250"; + reg = <0xf0000000 0x2000>; + interrupts = <24>; + clock-frequency = <3686400>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + no-loopback-test = <1>; + }; + + pguclk: pguclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25175000>; + }; + + pgu@f9000000 { + compatible = "snps,arcpgu"; + reg = <0xf9000000 0x400>; + clocks = <&pguclk>; + clock-names = "pxlclk"; + }; + + ps2: ps2@f9001000 { + compatible = "snps,arc_ps2"; + reg = <0xf9000400 0x14>; + interrupts = <27>; + interrupt-names = "arc_ps2_irq"; + }; + + eth0: ethernet@f0003000 { + compatible = "ezchip,nps-mgt-enet"; + reg = <0xf0003000 0x44>; + interrupts = <25>; + }; + + arcpct0: pct { + compatible = "snps,archs-pct"; + #interrupt-cells = <1>; + interrupts = <20>; + }; + }; +}; diff --git a/arch/arc/boot/dts/nsimosci_hs_idu.dts b/arch/arc/boot/dts/nsimosci_hs_idu.dts new file mode 100644 index 000000000..69d794c59 --- /dev/null +++ b/arch/arc/boot/dts/nsimosci_hs_idu.dts @@ -0,0 +1,98 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com) + */ +/dts-v1/; + +/include/ "skeleton_hs_idu.dtsi" + +/ { + model = "snps,nsimosci_hs-smp"; + compatible = "snps,nsimosci_hs"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&core_intc>; + + chosen { + /* this is for console on serial */ + bootargs = "earlycon=uart8250,mmio32,0xf0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblan=0 debug video=640x480-24 print-fatal-signals=1"; + }; + + aliases { + serial0 = &uart0; + }; + + fpga { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + /* child and parent address space 1:1 mapped */ + ranges; + + core_clk: core_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <5000000>; + }; + + core_intc: core-interrupt-controller { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + idu_intc: idu-interrupt-controller { + compatible = "snps,archs-idu-intc"; + interrupt-controller; + interrupt-parent = <&core_intc>; + #interrupt-cells = <1>; + }; + + uart0: serial@f0000000 { + compatible = "ns8250"; + reg = <0xf0000000 0x2000>; + interrupt-parent = <&idu_intc>; + interrupts = <0>; + clock-frequency = <3686400>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + no-loopback-test = <1>; + }; + + pguclk: pguclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25175000>; + }; + + pgu@f9000000 { + compatible = "snps,arcpgu"; + reg = <0xf9000000 0x400>; + clocks = <&pguclk>; + clock-names = "pxlclk"; + }; + + ps2: ps2@f9001000 { + compatible = "snps,arc_ps2"; + reg = <0xf9000400 0x14>; + interrupts = <3>; + interrupt-parent = <&idu_intc>; + interrupt-names = "arc_ps2_irq"; + }; + + eth0: ethernet@f0003000 { + compatible = "ezchip,nps-mgt-enet"; + reg = <0xf0003000 0x44>; + interrupt-parent = <&idu_intc>; + interrupts = <1>; + }; + + arcpct0: pct { + compatible = "snps,archs-pct"; + #interrupt-cells = <1>; + interrupts = <20>; + }; + }; +}; diff --git a/arch/arc/boot/dts/skeleton.dtsi b/arch/arc/boot/dts/skeleton.dtsi new file mode 100644 index 000000000..ba86b8036 --- /dev/null +++ b/arch/arc/boot/dts/skeleton.dtsi @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com) + */ + +/* + * Skeleton device tree; the bare minimum needed to boot; just include and + * add a compatible value. + */ + +/ { + compatible = "snps,arc"; + #address-cells = <1>; + #size-cells = <1>; + chosen { }; + aliases { }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "snps,arc770d"; + reg = <0>; + clocks = <&core_clk>; + }; + }; + + /* TIMER0 with interrupt for clockevent */ + timer0 { + compatible = "snps,arc-timer"; + interrupts = <3>; + interrupt-parent = <&core_intc>; + clocks = <&core_clk>; + }; + + /* TIMER1 for free running clocksource */ + timer1 { + compatible = "snps,arc-timer"; + clocks = <&core_clk>; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256M */ + }; +}; diff --git a/arch/arc/boot/dts/skeleton_hs.dtsi b/arch/arc/boot/dts/skeleton_hs.dtsi new file mode 100644 index 000000000..8fb49890e --- /dev/null +++ b/arch/arc/boot/dts/skeleton_hs.dtsi @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com) + */ + +/ { + compatible = "snps,arc"; + #address-cells = <1>; + #size-cells = <1>; + chosen { }; + aliases { }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "snps,archs38"; + reg = <0>; + clocks = <&core_clk>; + }; + }; + + /* TIMER0 with interrupt for clockevent */ + timer0 { + compatible = "snps,arc-timer"; + interrupts = <16>; + interrupt-parent = <&core_intc>; + clocks = <&core_clk>; + }; + + /* 64-bit Local RTC: preferred clocksource for UP */ + rtc { + compatible = "snps,archs-timer-rtc"; + clocks = <&core_clk>; + }; + + /* TIMER1 for free running clocksource: Fallback if rtc not found */ + timer1 { + compatible = "snps,arc-timer"; + clocks = <&core_clk>; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256M */ + }; +}; diff --git a/arch/arc/boot/dts/skeleton_hs_idu.dtsi b/arch/arc/boot/dts/skeleton_hs_idu.dtsi new file mode 100644 index 000000000..75f5c9ecb --- /dev/null +++ b/arch/arc/boot/dts/skeleton_hs_idu.dtsi @@ -0,0 +1,61 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com) + */ + +/ { + compatible = "snps,arc"; + #address-cells = <1>; + #size-cells = <1>; + chosen { }; + aliases { }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "snps,archs38"; + reg = <0>; + clocks = <&core_clk>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "snps,archs38"; + reg = <1>; + clocks = <&core_clk>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "snps,archs38"; + reg = <2>; + clocks = <&core_clk>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "snps,archs38"; + reg = <3>; + clocks = <&core_clk>; + }; + }; + + /* TIMER0 with interrupt for clockevent */ + timer0 { + compatible = "snps,arc-timer"; + interrupts = <16>; + interrupt-parent = <&core_intc>; + clocks = <&core_clk>; + }; + + /* 64-bit Global Free Running Counter */ + gfrc { + compatible = "snps,archs-timer-gfrc"; + clocks = <&core_clk>; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256M */ + }; +}; diff --git a/arch/arc/boot/dts/vdk_axc003.dtsi b/arch/arc/boot/dts/vdk_axc003.dtsi new file mode 100644 index 000000000..c21d0eb07 --- /dev/null +++ b/arch/arc/boot/dts/vdk_axc003.dtsi @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2013, 2014 Synopsys, Inc. (www.synopsys.com) + */ + +/* + * Device tree for AXC003 CPU card: HS38x UP configuration (VDK version) + */ + +/include/ "skeleton_hs.dtsi" + +/ { + compatible = "snps,arc"; + #address-cells = <1>; + #size-cells = <1>; + + cpu_card { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x00000000 0xf0000000 0x10000000>; + + core_clk: core_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + + core_intc: archs-intc@cpu { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + debug_uart: dw-apb-uart@5000 { + compatible = "snps,dw-apb-uart"; + reg = <0x5000 0x100>; + clock-frequency = <2403200>; + interrupt-parent = <&core_intc>; + interrupts = <19>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + }; + + mb_intc: interrupt-controller@e0012000 { + #interrupt-cells = <1>; + compatible = "snps,dw-apb-ictl"; + reg = < 0xe0012000 0x200 >; + interrupt-controller; + interrupt-parent = <&core_intc>; + interrupts = < 18 >; + }; + + memory { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x80000000 0x40000000>; + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512MiB */ + }; +}; diff --git a/arch/arc/boot/dts/vdk_axc003_idu.dtsi b/arch/arc/boot/dts/vdk_axc003_idu.dtsi new file mode 100644 index 000000000..4d348853a --- /dev/null +++ b/arch/arc/boot/dts/vdk_axc003_idu.dtsi @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2014, 2015 Synopsys, Inc. (www.synopsys.com) + */ + +/* + * Device tree for AXC003 CPU card: + * HS38x2 (Dual Core) with IDU intc (VDK version) + */ + +/include/ "skeleton_hs_idu.dtsi" + +/ { + compatible = "snps,arc"; + #address-cells = <1>; + #size-cells = <1>; + + cpu_card { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x00000000 0xf0000000 0x10000000>; + + core_clk: core_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <50000000>; + }; + + core_intc: archs-intc@cpu { + compatible = "snps,archs-intc"; + interrupt-controller; + #interrupt-cells = <1>; + }; + + idu_intc: idu-interrupt-controller { + compatible = "snps,archs-idu-intc"; + interrupt-controller; + interrupt-parent = <&core_intc>; + #interrupt-cells = <1>; + }; + + debug_uart: dw-apb-uart@5000 { + compatible = "snps,dw-apb-uart"; + reg = <0x5000 0x100>; + clock-frequency = <2403200>; + interrupt-parent = <&idu_intc>; + interrupts = <2>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + }; + + mb_intc: interrupt-controller@e0012000 { + #interrupt-cells = <1>; + compatible = "snps,dw-apb-ictl"; + reg = < 0xe0012000 0x200 >; + interrupt-controller; + interrupt-parent = <&idu_intc>; + interrupts = <0>; + }; + + memory { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x80000000 0x40000000>; + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512MiB */ + }; +}; diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi new file mode 100644 index 000000000..cbb179770 --- /dev/null +++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Support for peripherals on the AXS10x mainboard (VDK version) + * + * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com) + */ + +/ { + axs10x_mb_vdk { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0xe0000000 0x10000000>; + interrupt-parent = <&mb_intc>; + + clocks { + apbclk: apbclk { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + #clock-cells = <0>; + }; + + mmcclk: mmcclk { + compatible = "fixed-clock"; + clock-frequency = <50000000>; + #clock-cells = <0>; + }; + + pguclk: pguclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25175000>; + }; + }; + + ethernet@18000 { + #interrupt-cells = <1>; + compatible = "snps,dwmac"; + reg = < 0x18000 0x2000 >; + interrupts = < 4 >; + interrupt-names = "macirq"; + phy-mode = "rgmii"; + snps,phy-addr = < 0 >; // VDK model phy address is 0 + snps,pbl = < 32 >; + clocks = <&apbclk>; + clock-names = "stmmaceth"; + }; + + ehci@40000 { + compatible = "generic-ehci"; + reg = < 0x40000 0x100 >; + interrupts = < 8 >; + }; + + uart@20000 { + compatible = "snps,dw-apb-uart"; + reg = <0x20000 0x100>; + clock-frequency = <2403200>; + interrupts = <17>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + uart@21000 { + compatible = "snps,dw-apb-uart"; + reg = <0x21000 0x100>; + clock-frequency = <2403200>; + interrupts = <18>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + uart@22000 { + compatible = "snps,dw-apb-uart"; + reg = <0x22000 0x100>; + clock-frequency = <2403200>; + interrupts = <19>; + baud = <115200>; + reg-shift = <2>; + reg-io-width = <4>; + }; + +/* PGU output directly sent to virtual LCD screen; hdmi controller not modelled */ + pgu@17000 { + compatible = "snps,arcpgu"; + reg = <0x17000 0x400>; + clocks = <&pguclk>; + clock-names = "pxlclk"; + }; + +/* VDK has additional ps2 keyboard/mouse interface integrated in LCD screen model */ + ps2: ps2@e0017400 { + compatible = "snps,arc_ps2"; + reg = <0x17400 0x14>; + interrupts = <5>; + interrupt-names = "arc_ps2_irq"; + }; + + mmc@15000 { + compatible = "snps,dw-mshc"; + reg = <0x15000 0x400>; + fifo-depth = <1024>; + card-detect-delay = <200>; + clocks = <&apbclk>, <&mmcclk>; + clock-names = "biu", "ciu"; + interrupts = <7>; + bus-width = <4>; + }; + }; + + /* + * Embedded Vision subsystem UIO mappings; only relevant for EV VDK + * + * This node is intentionally put outside of MB above becase + * it maps areas outside of MB's 0xez-0xfz. + */ + uio_ev: uio@d0000000 { + compatible = "generic-uio"; + reg = <0xd0000000 0x2000 0xd1000000 0x2000 0x90000000 0x10000000 0xc0000000 0x10000000>; + reg-names = "ev_gsa", "ev_ctrl", "ev_shared_mem", "ev_code_mem"; + interrupt-parent = <&mb_intc>; + interrupts = <23>; + }; +}; diff --git a/arch/arc/boot/dts/vdk_hs38.dts b/arch/arc/boot/dts/vdk_hs38.dts new file mode 100644 index 000000000..cddea7eac --- /dev/null +++ b/arch/arc/boot/dts/vdk_hs38.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com) + * + * ARC HS38 Virtual Development Kit (VDK) + */ +/dts-v1/; + +/include/ "vdk_axc003.dtsi" +/include/ "vdk_axs10x_mb.dtsi" + +/ { + model = "snps,vdk_archs"; + compatible = "snps,axs103"; + + chosen { + bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0"; + }; +}; diff --git a/arch/arc/boot/dts/vdk_hs38_smp.dts b/arch/arc/boot/dts/vdk_hs38_smp.dts new file mode 100644 index 000000000..f57d1922e --- /dev/null +++ b/arch/arc/boot/dts/vdk_hs38_smp.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com) + * + * ARC HS38 Virtual Development Kit, SMP version (VDK) + */ +/dts-v1/; + +/include/ "vdk_axc003_idu.dtsi" +/include/ "vdk_axs10x_mb.dtsi" + +/ { + model = "snps,vdk_archs-smp"; + compatible = "snps,axs103"; + + chosen { + bootargs = "earlycon=uart8250,mmio32,0xe0022000,115200n8 console=tty0 console=ttyS3,115200n8 consoleblank=0 video=640x480-24"; + }; +}; |