diff options
Diffstat (limited to 'arch/arm/boot/dts/imx6dl-prtrvt.dts')
| -rw-r--r-- | arch/arm/boot/dts/imx6dl-prtrvt.dts | 188 |
1 files changed, 188 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/imx6dl-prtrvt.dts b/arch/arm/boot/dts/imx6dl-prtrvt.dts new file mode 100644 index 000000000..90e01de8c --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-prtrvt.dts @@ -0,0 +1,188 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* + * Copyright (c) 2014 Protonic Holland + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-prti6q.dtsi" +#include <dt-bindings/leds/common.h> + +/ { + model = "Protonic RVT board"; + compatible = "prt,prtrvt", "fsl,imx6dl"; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x10000000>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-debug0 { + function = LED_FUNCTION_STATUS; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <20000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&ecspi3 { + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + status = "okay"; + + nfc@0 { + compatible = "ti,trf7970a"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nfc>; + spi-max-frequency = <2000000>; + interrupts-extended = <&gpio5 14 IRQ_TYPE_LEVEL_LOW>; + ti,enable-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>, + <&gpio5 11 GPIO_ACTIVE_LOW>; + vin-supply = <®_3v3>; + vin-voltage-override = <3100000>; + autosuspend-delay = <30000>; + irq-status-read-quirk; + en2-rf-quirk; + t5t-rmb-extra-byte-quirk; + status = "okay"; + }; +}; + +&i2c3 { + adc@49 { + compatible = "ti,ads1015"; + reg = <0x49>; + #address-cells = <1>; + #size-cells = <0>; + + /* nc */ + channel@4 { + reg = <4>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + /* nc */ + channel@5 { + reg = <5>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + /* can1_l */ + channel@6 { + reg = <6>; + ti,gain = <3>; + ti,datarate = <3>; + }; + + /* can1_h */ + channel@7 { + reg = <7>; + ti,gain = <3>; + ti,datarate = <3>; + }; + }; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&pcie { + status = "okay"; +}; + +&usbh1 { + status = "disabled"; +}; + +&usbotg { + disable-over-current; +}; + +&vpu { + status = "disabled"; +}; + +&iomuxc { + pinctrl_can1phy: can1phy { + fsl,pins = < + /* CAN1_SR */ + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070 + /* CAN1_TERM */ + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + /* CS */ + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x000b1 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + >; + }; + + pinctrl_nfc: nfcgrp { + fsl,pins = < + /* NFC_ASK_OOK */ + MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x100b1 + /* NFC_PWR_EN */ + MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x100b1 + /* NFC_EN2 */ + MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x100b1 + /* NFC_EN */ + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1 + /* NFC_MOD */ + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x100b1 + /* NFC_IRQ */ + MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x100b1 + >; + }; +}; |