diff options
Diffstat (limited to 'arch/arm/boot/dts/integratorap-im-pd1.dts')
| -rw-r--r-- | arch/arm/boot/dts/integratorap-im-pd1.dts | 270 |
1 files changed, 270 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/integratorap-im-pd1.dts b/arch/arm/boot/dts/integratorap-im-pd1.dts new file mode 100644 index 000000000..1412a1a96 --- /dev/null +++ b/arch/arm/boot/dts/integratorap-im-pd1.dts @@ -0,0 +1,270 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree for the ARM Integrator/AP platform + * with the IM-PD1 example logical module mounted. + */ + +#include "integratorap.dts" + +/ { + model = "ARM Integrator/AP with IM-PD1"; + compatible = "arm,integrator-ap"; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + impd1_ram: vram@c2000000 { + /* 1 MB of designated video RAM on the IM-PD1 */ + compatible = "shared-dma-pool"; + reg = <0xc2000000 0x00100000>; + no-map; + }; + }; +}; + +&lm0 { + syscon@0 { + compatible = "arm,im-pd1-syscon", "syscon"; + reg = <0x00000000 0x1000>; + + vco1: clock@00 { + compatible = "arm,impd1-vco1"; + #clock-cells = <0>; + lock-offset = <0x08>; + vco-offset = <0x00>; + clocks = <&sysclk>; + clock-output-names = "IM-PD1-VCO1"; + }; + + vco2: clock@04 { + compatible = "arm,impd1-vco2"; + #clock-cells = <0>; + lock-offset = <0x08>; + vco-offset = <0x04>; + clocks = <&sysclk>; + clock-output-names = "IM-PD1-VCO2"; + }; + }; + + /* Also used for the Smart Card Interface SCI */ + impd1_uartclk: clock@1_4 { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clocks = <&vco2>; + clock-output-names = "VCO2_DIV4"; + }; + + /* For the SSP the clock is divided by 64 */ + impd1_sspclk: clock@1_64 { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <64>; + clock-mult = <1>; + clocks = <&vco2>; + clock-output-names = "VCO2_DIV64"; + }; + + /* Fixed regulator for the MMC */ + impd1_3v3: regulator { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* Push buttons on the IM-PD1 */ + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@0 { + debounce-interval = <50>; + linux,code = <KEY_UP>; + label = "UP"; + gpios = <&impd1_gpio1 0 GPIO_ACTIVE_HIGH>; + }; + button@1 { + debounce-interval = <50>; + linux,code = <KEY_DOWN>; + label = "DOWN"; + gpios = <&impd1_gpio1 1 GPIO_ACTIVE_HIGH>; + }; + button@2 { + debounce-interval = <50>; + linux,code = <KEY_LEFT>; + label = "LEFT"; + gpios = <&impd1_gpio1 2 GPIO_ACTIVE_HIGH>; + }; + button@3 { + debounce-interval = <50>; + linux,code = <KEY_RIGHT>; + label = "UP"; + gpios = <&impd1_gpio1 3 GPIO_ACTIVE_HIGH>; + }; + button@4 { + debounce-interval = <50>; + linux,code = <KEY_ESC>; + label = "ESC"; + gpios = <&impd1_gpio1 4 GPIO_ACTIVE_HIGH>; + }; + button@5 { + debounce-interval = <50>; + linux,code = <KEY_ENTER>; + label = "ENTER"; + gpios = <&impd1_gpio1 5 GPIO_ACTIVE_HIGH>; + }; + }; + + + bridge { + compatible = "ti,ths8134b", "ti,ths8134"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + vga_bridge_in: endpoint { + remote-endpoint = <&clcd_pads_vga_dac>; + }; + }; + + port@1 { + reg = <1>; + + vga_bridge_out: endpoint { + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_bridge_out>; + }; + }; + }; + + uart@100000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x00100000 0x1000>; + interrupts-extended = <&impd1_vic 1>; + clocks = <&impd1_uartclk>, <&sysclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + uart@200000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x00200000 0x1000>; + interrupts-extended = <&impd1_vic 2>; + clocks = <&impd1_uartclk>, <&sysclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + ssp@300000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x00300000 0x1000>; + interrupts-extended = <&impd1_vic 3>; + clocks = <&impd1_sspclk>, <&sysclk>; + clock-names = "spiclk", "apb_pclk"; + }; + + impd1_gpio0: gpio@400000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x00400000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts-extended = <&impd1_vic 4>; + clocks = <&sysclk>; + clock-names = "apb_pclk"; + }; + + impd1_gpio1: gpio@500000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x00500000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts-extended = <&impd1_vic 5>; + clocks = <&sysclk>; + clock-names = "apb_pclk"; + }; + + rtc@600000 { + compatible = "arm,pl030", "arm,primecell"; + reg = <0x00600000 0x1000>; + interrupts-extended = <&impd1_vic 6>; + clocks = <&sysclk>; + clock-names = "apb_pclk"; + }; + + mmc@700000 { + compatible = "arm,pl181", "arm,primecell"; + reg = <0x00700000 0x1000>; + interrupts-extended = <&impd1_vic 7>, + <&impd1_vic 8>; + clocks = <&sysclk>, <&sysclk>; + clock-names = "mclk", "apb_pclk"; + bus-width = <1>; + max-frequency = <515633>; + vmmc-supply = <&impd1_3v3>; + wp-gpios = <&impd1_gpio0 3 GPIO_ACTIVE_HIGH>; + cd-gpios = <&impd1_gpio0 4 GPIO_ACTIVE_LOW>; + }; + + aaci@800000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x00800000 0x1000>; + interrupts-extended = <&impd1_vic 9>; + clocks = <&sysclk>; + clock-names = "apb_pclk"; + }; + + display@1000000 { + compatible = "arm,pl110", "arm,primecell"; + reg = <0x01000000 0x1000>; + interrupts-extended = <&impd1_vic 11>; + clocks = <&vco1>, <&sysclk>; + clock-names = "clcdclk", "apb_pclk"; + /* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */ + max-memory-bandwidth = <40000000>; + memory-region = <&impd1_ram>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + + clcd_pads_vga_dac: endpoint@0 { + reg = <0>; + remote-endpoint = <&vga_bridge_in>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; + }; + + impd1_vic: interrupt-controller@3000000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x03000000 0x1000>; + /* Valid interrupts, 0-9 and 11 */ + valid-mask = <0x00000bff>; + /* LM site 0 has IRQ 9 on the PIC */ + interrupts-extended = <&pic 9>; + }; +}; |