diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm/boot/dts/kirkwood-goflexnet.dts | 190 |
1 files changed, 190 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts new file mode 100644 index 000000000..02d87e0a1 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -0,0 +1,190 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" + +/ { + model = "Seagate GoFlex Net"; + compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; + stdout-path = &uart0; + }; + + ocp@f1000000 { + pinctrl: pin-controller@10000 { + pmx_usb_power_enable: pmx-usb-power-enable { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + pmx_led_right_cap_0: pmx-led_right_cap_0 { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_right_cap_1: pmx-led_right_cap_1 { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_led_right_cap_2: pmx-led_right_cap_2 { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_led_right_cap_3: pmx-led_right_cap_3 { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_led_left_cap_0: pmx-led_left_cap_0 { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_led_left_cap_1: pmx-led_left_cap_1 { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_led_left_cap_2: pmx-led_left_cap_2 { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_led_left_cap_3: pmx-led_left_cap_3 { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_led_green: pmx-led_green { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_led_orange: pmx-led_orange { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + }; + serial@12000 { + status = "ok"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + }; + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = < &pmx_led_orange + &pmx_led_left_cap_0 &pmx_led_left_cap_1 + &pmx_led_left_cap_2 &pmx_led_left_cap_3 + &pmx_led_right_cap_0 &pmx_led_right_cap_1 + &pmx_led_right_cap_2 &pmx_led_right_cap_3 + >; + pinctrl-names = "default"; + + health { + label = "status:green:health"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + fault { + label = "status:orange:fault"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + left0 { + label = "status:white:left0"; + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + }; + left1 { + label = "status:white:left1"; + gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; + }; + left2 { + label = "status:white:left2"; + gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + }; + left3 { + label = "status:white:left3"; + gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; + }; + right0 { + label = "status:white:right0"; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + }; + right1 { + label = "status:white:right1"; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + }; + right2 { + label = "status:white:right2"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + }; + right3 { + label = "status:white:right3"; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + }; + }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_usb_power_enable>; + pinctrl-names = "default"; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&nand { + chip-delay = <40>; + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x400000>; + }; + + partition@500000 { + label = "pogoplug"; + reg = <0x0500000 0x2000000>; + }; + + partition@2500000 { + label = "root"; + reg = <0x02500000 0xd800000>; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; |