diff options
Diffstat (limited to 'arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts')
| -rw-r--r-- | arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts | 643 |
1 files changed, 643 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts new file mode 100644 index 000000000..701b39671 --- /dev/null +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-castor.dts @@ -0,0 +1,643 @@ +#include "qcom-msm8974pro.dtsi" +#include "qcom-pm8841.dtsi" +#include "qcom-pm8941.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "Sony Xperia Z2 Tablet"; + compatible = "sony,xperia-castor", "qcom,msm8974"; + + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + input-name = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + volume-down { + label = "volume_down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA>; + }; + + camera-focus { + label = "camera_focus"; + gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_CAMERA_FOCUS>; + }; + + volume-up { + label = "volume_up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + smd { + rpm { + rpm_requests { + pm8941-regulators { + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-system-load = <154000>; + }; + + s4 { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + + regulator-always-on; + regulator-boot-on; + }; + + l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + }; + + l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-boot-on; + }; + + l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + l11 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + }; + + l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + l17 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-allow-set-load; + regulator-boot-on; + regulator-allow-set-load; + regulator-system-load = <500000>; + }; + + l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-boot-on; + }; + + l22 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + l23 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + + regulator-boot-on; + }; + }; + }; + }; + }; + + vreg_bl_vddio: lcd-backlight-vddio { + compatible = "regulator-fixed"; + regulator-name = "vreg_bl_vddio"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + gpio = <&msmgpio 69 0>; + enable-active-high; + + vin-supply = <&pm8941_s3>; + startup-delay-us = <70000>; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_backlight_en_pin_a>; + }; + + vreg_vsp: lcd-dcdc-regulator { + compatible = "regulator-fixed"; + regulator-name = "vreg_vsp"; + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; + + gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_dcdc_en_pin_a>; + }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_regulator_pin>; + }; +}; + +&soc { + sdhci@f9824900 { + status = "ok"; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + bus-width = <8>; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc1_pin_a>; + }; + + sdhci@f9864900 { + status = "ok"; + + max-frequency = <100000000>; + non-removable; + vmmc-supply = <&vreg_wlan>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc3_pin_a>; + + #address-cells = <1>; + #size-cells = <0>; + + bcrmf@1 { + compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + brcm,drive-strength = <10>; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin>; + }; + }; + + sdhci@f98a4900 { + status = "ok"; + + bus-width = <4>; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + cd-gpios = <&msmgpio 62 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc2_pin_a>, <&sdhc2_cd_pin_a>; + }; + + serial@f991e000 { + status = "ok"; + + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart2_pin_a>; + }; + + usb@f9a55000 { + status = "ok"; + + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + ulpi { + phy@a { + status = "ok"; + + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x64>; + }; + }; + }; + + pinctrl@fd510000 { + blsp1_uart2_pin_a: blsp1-uart2-pin-active { + rx { + pins = "gpio5"; + function = "blsp_uart2"; + + drive-strength = <2>; + bias-pull-up; + }; + + tx { + pins = "gpio4"; + function = "blsp_uart2"; + + drive-strength = <4>; + bias-disable; + }; + }; + + i2c8_pins: i2c8 { + mux { + pins = "gpio47", "gpio48"; + function = "blsp_i2c8"; + + drive-strength = <2>; + bias-disable; + }; + }; + + i2c11_pins: i2c11 { + mux { + pins = "gpio83", "gpio84"; + function = "blsp_i2c11"; + + drive-strength = <2>; + bias-disable; + }; + }; + + lcd_backlight_en_pin_a: lcd-backlight-vddio { + pins = "gpio69"; + drive-strength = <10>; + output-low; + bias-disable; + }; + + sdhc1_pin_a: sdhc1-pin-active { + clk { + pins = "sdc1_clk"; + drive-strength = <16>; + bias-disable; + }; + + cmd-data { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + sdhc2_cd_pin_a: sdhc2-cd-pin-active { + pins = "gpio62"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + sdhc2_pin_a: sdhc2-pin-active { + clk { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + sdhc3_pin_a: sdhc3-pin-active { + clk { + pins = "gpio40"; + function = "sdc3"; + + drive-strength = <10>; + bias-disable; + }; + + cmd { + pins = "gpio39"; + function = "sdc3"; + + drive-strength = <10>; + bias-pull-up; + }; + + data { + pins = "gpio35", "gpio36", "gpio37", "gpio38"; + function = "sdc3"; + + drive-strength = <10>; + bias-pull-up; + }; + }; + + ts_int_pin: synaptics { + pin { + pins = "gpio86"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + input-enable; + }; + }; + }; + + i2c@f9964000 { + status = "ok"; + + clock-frequency = <355000>; + qcom,src-freq = <50000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&i2c8_pins>; + + synaptics@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + + interrupt-parent = <&msmgpio>; + interrupts = <86 IRQ_TYPE_EDGE_FALLING>; + + #address-cells = <1>; + #size-cells = <0>; + + vdd-supply = <&pm8941_l22>; + vio-supply = <&pm8941_lvs3>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_pin>; + + syna,startup-delay-ms = <10>; + + rmi-f01@1 { + reg = <0x1>; + syna,nosleep = <1>; + }; + + rmi-f11@11 { + reg = <0x11>; + syna,f11-flip-x = <1>; + syna,sensor-type = <1>; + }; + }; + }; + + i2c@f9967000 { + status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c11_pins>; + clock-frequency = <355000>; + qcom,src-freq = <50000000>; + + lp8566_wled: backlight@2c { + compatible = "ti,lp8556"; + reg = <0x2c>; + power-supply = <&vreg_bl_vddio>; + + bl-name = "backlight"; + dev-ctrl = /bits/ 8 <0x05>; + init-brt = /bits/ 8 <0x3f>; + rom_a0h { + rom-addr = /bits/ 8 <0xa0>; + rom-val = /bits/ 8 <0xff>; + }; + rom_a1h { + rom-addr = /bits/ 8 <0xa1>; + rom-val = /bits/ 8 <0x3f>; + }; + rom_a2h { + rom-addr = /bits/ 8 <0xa2>; + rom-val = /bits/ 8 <0x20>; + }; + rom_a3h { + rom-addr = /bits/ 8 <0xa3>; + rom-val = /bits/ 8 <0x5e>; + }; + rom_a4h { + rom-addr = /bits/ 8 <0xa4>; + rom-val = /bits/ 8 <0x02>; + }; + rom_a5h { + rom-addr = /bits/ 8 <0xa5>; + rom-val = /bits/ 8 <0x04>; + }; + rom_a6h { + rom-addr = /bits/ 8 <0xa6>; + rom-val = /bits/ 8 <0x80>; + }; + rom_a7h { + rom-addr = /bits/ 8 <0xa7>; + rom-val = /bits/ 8 <0xf7>; + }; + rom_a9h { + rom-addr = /bits/ 8 <0xa9>; + rom-val = /bits/ 8 <0x80>; + }; + rom_aah { + rom-addr = /bits/ 8 <0xaa>; + rom-val = /bits/ 8 <0x0f>; + }; + rom_aeh { + rom-addr = /bits/ 8 <0xae>; + rom-val = /bits/ 8 <0x0f>; + }; + }; + }; +}; + +&spmi_bus { + pm8941@0 { + charger@1000 { + qcom,fast-charge-safe-current = <1500000>; + qcom,fast-charge-current-limit = <1500000>; + qcom,dc-current-limit = <1800000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,fast-charge-low-threshold-voltage = <3400000>; + qcom,auto-recharge-threshold-voltage = <4200000>; + qcom,minimum-input-voltage = <4300000>; + }; + + gpios@c000 { + gpio_keys_pin_a: gpio-keys-active { + pins = "gpio2", "gpio5"; + function = "normal"; + + bias-pull-up; + power-source = <PM8941_GPIO_S3>; + }; + + wlan_sleep_clk_pin: wl-sleep-clk { + pins = "gpio17"; + function = "func2"; + + output-high; + power-source = <PM8941_GPIO_S3>; + }; + + wlan_regulator_pin: wl-reg-active { + pins = "gpio18"; + function = "normal"; + + bias-disable; + power-source = <PM8941_GPIO_S3>; + }; + + lcd_dcdc_en_pin_a: lcd-dcdc-en-active { + pins = "gpio20"; + function = "normal"; + + bias-disable; + power-source = <PM8941_GPIO_S3>; + input-disable; + output-low; + }; + + }; + + coincell@2800 { + status = "ok"; + qcom,rset-ohms = <2100>; + qcom,vset-millivolts = <3000>; + }; + }; +}; |