diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm/boot/dts/rv1108-elgin-r1.dts | 207 |
1 files changed, 207 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/rv1108-elgin-r1.dts b/arch/arm/boot/dts/rv1108-elgin-r1.dts new file mode 100644 index 000000000..b1db92471 --- /dev/null +++ b/arch/arm/boot/dts/rv1108-elgin-r1.dts @@ -0,0 +1,207 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/* + * Copyright (C) 2018 O.S. Systems Software LTDA. + */ + +/dts-v1/; + +#include "rv1108.dtsi" + +/ { + model = "Elgin RV1108 R1 board"; + compatible = "elgin,rv1108-r1", "rockchip,rv1108"; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x08000000>; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vsys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_core>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + no-sd; + no-sdio; + non-removable; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + status = "okay"; +}; + +&gmac { + clock_in_out = "output"; + pinctrl-names = "default"; + pinctrl-0 = <&rmii_pins>; + snps,reset-gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <275>; + i2c-scl-falling-time-ns = <16>; + status = "okay"; + + rk805: pmic@18 { + compatible = "rockchip,rk805"; + reg = <0x18>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>; + rockchip,system-power-controller; + + vcc1-supply = <&vcc_sys>; + vcc2-supply = <&vcc_sys>; + vcc3-supply = <&vcc_sys>; + vcc4-supply = <&vcc_sys>; + vcc5-supply = <&vdd_buck2>; + vcc6-supply = <&vdd_buck2>; + + regulators { + vdd_core: DCDC_REG1 { + regulator-name= "vdd_core"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vdd_buck2: DCDC_REG2 { + regulator-name= "vdd_buck2"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name= "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_io: DCDC_REG4 { + regulator-name= "vcc_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vdd_10: LDO_REG1 { + regulator-name= "vdd_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_18: LDO_REG2 { + regulator-name= "vcc_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd10_pmu: LDO_REG3 { + regulator-name= "vdd10_pmu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + }; + }; +}; + +&spi { + pinctrl-names = "default"; + pinctrl-0 = <&spim1_clk &spim1_cs0 &spim1_tx &spim1_rx>; + status = "okay"; + + dh2228fv: dac@0 { + compatible = "rohm,dh2228fv"; + reg = <0>; + spi-max-frequency = <24000000>; + spi-cpha; + spi-cpol; + }; +}; + +&u2phy { + status = "okay"; + + u2phy_host: host-port { + status = "okay"; + }; + + u2phy_otg: otg-port { + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host_ehci { + status = "okay"; +}; + +&usb_host_ohci { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; |