diff options
Diffstat (limited to 'arch/arm/mach-mmp/pm-pxa910.c')
| -rw-r--r-- | arch/arm/mach-mmp/pm-pxa910.c | 272 |
1 files changed, 272 insertions, 0 deletions
diff --git a/arch/arm/mach-mmp/pm-pxa910.c b/arch/arm/mach-mmp/pm-pxa910.c new file mode 100644 index 000000000..1d71d73c1 --- /dev/null +++ b/arch/arm/mach-mmp/pm-pxa910.c @@ -0,0 +1,272 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * PXA910 Power Management Routines + * + * (C) Copyright 2009 Marvell International Ltd. + * All Rights Reserved + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/time.h> +#include <linux/delay.h> +#include <linux/suspend.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <asm/mach-types.h> +#include <asm/outercache.h> + +#include <linux/soc/mmp/cputype.h> +#include "addr-map.h" +#include "pm-pxa910.h" +#include "regs-icu.h" +#include "irqs.h" + +int pxa910_set_wake(struct irq_data *data, unsigned int on) +{ + uint32_t awucrm = 0, apcr = 0; + int irq = data->irq; + + /* setting wakeup sources */ + switch (irq) { + /* wakeup line 2 */ + case IRQ_PXA910_AP_GPIO: + awucrm = MPMU_AWUCRM_WAKEUP(2); + apcr |= MPMU_APCR_SLPWP2; + break; + /* wakeup line 3 */ + case IRQ_PXA910_KEYPAD: + awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_KEYPRESS; + apcr |= MPMU_APCR_SLPWP3; + break; + case IRQ_PXA910_ROTARY: + awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_NEWROTARY; + apcr |= MPMU_APCR_SLPWP3; + break; + case IRQ_PXA910_TRACKBALL: + awucrm = MPMU_AWUCRM_WAKEUP(3) | MPMU_AWUCRM_TRACKBALL; + apcr |= MPMU_APCR_SLPWP3; + break; + /* wakeup line 4 */ + case IRQ_PXA910_AP1_TIMER1: + awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_1; + apcr |= MPMU_APCR_SLPWP4; + break; + case IRQ_PXA910_AP1_TIMER2: + awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_2; + apcr |= MPMU_APCR_SLPWP4; + break; + case IRQ_PXA910_AP1_TIMER3: + awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP1_TIMER_3; + apcr |= MPMU_APCR_SLPWP4; + break; + case IRQ_PXA910_AP2_TIMER1: + awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_1; + apcr |= MPMU_APCR_SLPWP4; + break; + case IRQ_PXA910_AP2_TIMER2: + awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_2; + apcr |= MPMU_APCR_SLPWP4; + break; + case IRQ_PXA910_AP2_TIMER3: + awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_AP2_TIMER_3; + apcr |= MPMU_APCR_SLPWP4; + break; + case IRQ_PXA910_RTC_ALARM: + awucrm = MPMU_AWUCRM_WAKEUP(4) | MPMU_AWUCRM_RTC_ALARM; + apcr |= MPMU_APCR_SLPWP4; + break; + /* wakeup line 5 */ + case IRQ_PXA910_USB1: + case IRQ_PXA910_USB2: + awucrm = MPMU_AWUCRM_WAKEUP(5); + apcr |= MPMU_APCR_SLPWP5; + break; + /* wakeup line 6 */ + case IRQ_PXA910_MMC: + awucrm = MPMU_AWUCRM_WAKEUP(6) + | MPMU_AWUCRM_SDH1 + | MPMU_AWUCRM_SDH2; + apcr |= MPMU_APCR_SLPWP6; + break; + /* wakeup line 7 */ + case IRQ_PXA910_PMIC_INT: + awucrm = MPMU_AWUCRM_WAKEUP(7); + apcr |= MPMU_APCR_SLPWP7; + break; + default: + if (irq >= IRQ_GPIO_START && irq < IRQ_BOARD_START) { + awucrm = MPMU_AWUCRM_WAKEUP(2); + apcr |= MPMU_APCR_SLPWP2; + } else { + /* FIXME: This should return a proper error code ! */ + printk(KERN_ERR "Error: no defined wake up source irq: %d\n", + irq); + } + } + + if (on) { + if (awucrm) { + awucrm |= __raw_readl(MPMU_AWUCRM); + __raw_writel(awucrm, MPMU_AWUCRM); + } + if (apcr) { + apcr = ~apcr & __raw_readl(MPMU_APCR); + __raw_writel(apcr, MPMU_APCR); + } + } else { + if (awucrm) { + awucrm = ~awucrm & __raw_readl(MPMU_AWUCRM); + __raw_writel(awucrm, MPMU_AWUCRM); + } + if (apcr) { + apcr |= __raw_readl(MPMU_APCR); + __raw_writel(apcr, MPMU_APCR); + } + } + return 0; +} + +void pxa910_pm_enter_lowpower_mode(int state) +{ + uint32_t idle_cfg, apcr; + + idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG); + apcr = __raw_readl(MPMU_APCR); + + apcr &= ~(MPMU_APCR_DDRCORSD | MPMU_APCR_APBSD | MPMU_APCR_AXISD + | MPMU_APCR_VCTCXOSD | MPMU_APCR_STBYEN); + idle_cfg &= ~(APMU_MOH_IDLE_CFG_MOH_IDLE + | APMU_MOH_IDLE_CFG_MOH_PWRDWN); + + switch (state) { + case POWER_MODE_UDR: + /* only shutdown APB in UDR */ + apcr |= MPMU_APCR_STBYEN | MPMU_APCR_APBSD; + fallthrough; + case POWER_MODE_SYS_SLEEP: + apcr |= MPMU_APCR_SLPEN; /* set the SLPEN bit */ + apcr |= MPMU_APCR_VCTCXOSD; /* set VCTCXOSD */ + fallthrough; + case POWER_MODE_APPS_SLEEP: + apcr |= MPMU_APCR_DDRCORSD; /* set DDRCORSD */ + fallthrough; + case POWER_MODE_APPS_IDLE: + apcr |= MPMU_APCR_AXISD; /* set AXISDD bit */ + fallthrough; + case POWER_MODE_CORE_EXTIDLE: + idle_cfg |= APMU_MOH_IDLE_CFG_MOH_IDLE; + idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWRDWN; + idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWR_SW(3) + | APMU_MOH_IDLE_CFG_MOH_L2_PWR_SW(3); + fallthrough; + case POWER_MODE_CORE_INTIDLE: + break; + } + + /* program the memory controller hardware sleep type and auto wakeup */ + idle_cfg |= APMU_MOH_IDLE_CFG_MOH_DIS_MC_SW_REQ; + idle_cfg |= APMU_MOH_IDLE_CFG_MOH_MC_WAKE_EN; + __raw_writel(0x0, APMU_MC_HW_SLP_TYPE); /* auto refresh */ + + /* set DSPSD, DTCMSD, BBSD, MSASLPEN */ + apcr |= MPMU_APCR_DSPSD | MPMU_APCR_DTCMSD | MPMU_APCR_BBSD + | MPMU_APCR_MSASLPEN; + + /*always set SLEPEN bit mainly for MSA*/ + apcr |= MPMU_APCR_SLPEN; + + /* finally write the registers back */ + __raw_writel(idle_cfg, APMU_MOH_IDLE_CFG); + __raw_writel(apcr, MPMU_APCR); + +} + +static int pxa910_pm_enter(suspend_state_t state) +{ + unsigned int idle_cfg, reg = 0; + + /*pmic thread not completed,exit;otherwise system can't be waked up*/ + reg = __raw_readl(ICU_INT_CONF(IRQ_PXA910_PMIC_INT)); + if ((reg & 0x3) == 0) + return -EAGAIN; + + idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG); + idle_cfg |= APMU_MOH_IDLE_CFG_MOH_PWRDWN + | APMU_MOH_IDLE_CFG_MOH_SRAM_PWRDWN; + __raw_writel(idle_cfg, APMU_MOH_IDLE_CFG); + + /* disable L2 */ + outer_disable(); + /* wait for l2 idle */ + while (!(readl(CIU_REG(0x8)) & (1 << 16))) + udelay(1); + + cpu_do_idle(); + + /* enable L2 */ + outer_resume(); + /* wait for l2 idle */ + while (!(readl(CIU_REG(0x8)) & (1 << 16))) + udelay(1); + + idle_cfg = __raw_readl(APMU_MOH_IDLE_CFG); + idle_cfg &= ~(APMU_MOH_IDLE_CFG_MOH_PWRDWN + | APMU_MOH_IDLE_CFG_MOH_SRAM_PWRDWN); + __raw_writel(idle_cfg, APMU_MOH_IDLE_CFG); + + return 0; +} + +/* + * Called after processes are frozen, but before we shut down devices. + */ +static int pxa910_pm_prepare(void) +{ + pxa910_pm_enter_lowpower_mode(POWER_MODE_UDR); + return 0; +} + +/* + * Called after devices are re-setup, but before processes are thawed. + */ +static void pxa910_pm_finish(void) +{ + pxa910_pm_enter_lowpower_mode(POWER_MODE_CORE_INTIDLE); +} + +static int pxa910_pm_valid(suspend_state_t state) +{ + return ((state == PM_SUSPEND_STANDBY) || (state == PM_SUSPEND_MEM)); +} + +static const struct platform_suspend_ops pxa910_pm_ops = { + .valid = pxa910_pm_valid, + .prepare = pxa910_pm_prepare, + .enter = pxa910_pm_enter, + .finish = pxa910_pm_finish, +}; + +static int __init pxa910_pm_init(void) +{ + uint32_t awucrm = 0; + + if (!cpu_is_pxa910()) + return -EIO; + + suspend_set_ops(&pxa910_pm_ops); + + /* Set the following bits for MMP3 playback with VCTXO on */ + __raw_writel(__raw_readl(APMU_SQU_CLK_GATE_CTRL) | (1 << 30), + APMU_SQU_CLK_GATE_CTRL); + __raw_writel(__raw_readl(MPMU_FCCR) | (1 << 28), MPMU_FCCR); + + awucrm |= MPMU_AWUCRM_AP_ASYNC_INT | MPMU_AWUCRM_AP_FULL_IDLE; + __raw_writel(awucrm, MPMU_AWUCRM); + + return 0; +} + +late_initcall(pxa910_pm_init); |