1 files changed, 243 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/sram.c b/arch/arm/mach-omap2/sram.c
new file mode 100644
index 000000000..c98855f55
--- /dev/null
+++ b/arch/arm/mach-omap2/sram.c
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * OMAP SRAM detection and management
+ *
+ * Copyright (C) 2005 Nokia Corporation
+ * Written by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009-2012 Texas Instruments
+ * Added OMAP4/5 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/fncpy.h>
+#include <asm/tlb.h>
+#include <asm/cacheflush.h>
+
+#include <asm/mach/map.h>
+
+#include "soc.h"
+#include "iomap.h"
+#include "prm2xxx_3xxx.h"
+#include "sdrc.h"
+#include "sram.h"
+
+#define OMAP2_SRAM_PUB_PA	(OMAP2_SRAM_PA + 0xf800)
+#define OMAP3_SRAM_PUB_PA       (OMAP3_SRAM_PA + 0x8000)
+
+#define SRAM_BOOTLOADER_SZ	0x00
+
+#define OMAP24XX_VA_REQINFOPERM0	OMAP2_L3_IO_ADDRESS(0x68005048)
+#define OMAP24XX_VA_READPERM0		OMAP2_L3_IO_ADDRESS(0x68005050)
+#define OMAP24XX_VA_WRITEPERM0		OMAP2_L3_IO_ADDRESS(0x68005058)
+
+#define OMAP34XX_VA_REQINFOPERM0	OMAP2_L3_IO_ADDRESS(0x68012848)
+#define OMAP34XX_VA_READPERM0		OMAP2_L3_IO_ADDRESS(0x68012850)
+#define OMAP34XX_VA_WRITEPERM0		OMAP2_L3_IO_ADDRESS(0x68012858)
+#define OMAP34XX_VA_ADDR_MATCH2		OMAP2_L3_IO_ADDRESS(0x68012880)
+#define OMAP34XX_VA_SMS_RG_ATT0		OMAP2_L3_IO_ADDRESS(0x6C000048)
+
+#define GP_DEVICE		0x300
+
+#define ROUND_DOWN(value,boundary)	((value) & (~((boundary)-1)))
+
+static unsigned long omap_sram_start;
+static unsigned long omap_sram_skip;
+static unsigned long omap_sram_size;
+
+/*
+ * Depending on the target RAMFS firewall setup, the public usable amount of
+ * SRAM varies.  The default accessible size for all device types is 2k. A GP
+ * device allows ARM11 but not other initiators for full size. This
+ * functionality seems ok until some nice security API happens.
+ */
+static int is_sram_locked(void)
+{
+	if (OMAP2_DEVICE_TYPE_GP == omap_type()) {
+		/* RAMFW: R/W access to all initiators for all qualifier sets */
+		if (cpu_is_omap242x()) {
+			writel_relaxed(0xFF, OMAP24XX_VA_REQINFOPERM0); /* all q-vects */
+			writel_relaxed(0xCFDE, OMAP24XX_VA_READPERM0);  /* all i-read */
+			writel_relaxed(0xCFDE, OMAP24XX_VA_WRITEPERM0); /* all i-write */
+		}
+		if (cpu_is_omap34xx()) {
+			writel_relaxed(0xFFFF, OMAP34XX_VA_REQINFOPERM0); /* all q-vects */
+			writel_relaxed(0xFFFF, OMAP34XX_VA_READPERM0);  /* all i-read */
+			writel_relaxed(0xFFFF, OMAP34XX_VA_WRITEPERM0); /* all i-write */
+			writel_relaxed(0x0, OMAP34XX_VA_ADDR_MATCH2);
+			writel_relaxed(0xFFFFFFFF, OMAP34XX_VA_SMS_RG_ATT0);
+		}
+		return 0;
+	} else
+		return 1; /* assume locked with no PPA or security driver */
+}
+
+/*
+ * The amount of SRAM depends on the core type.
+ * Note that we cannot try to test for SRAM here because writes
+ * to secure SRAM will hang the system. Also the SRAM is not
+ * yet mapped at this point.
+ */
+static void __init omap_detect_sram(void)
+{
+	omap_sram_skip = SRAM_BOOTLOADER_SZ;
+	if (is_sram_locked()) {
+		if (cpu_is_omap34xx()) {
+			omap_sram_start = OMAP3_SRAM_PUB_PA;
+			if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
+			    (omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
+				omap_sram_size = 0x7000; /* 28K */
+				omap_sram_skip += SZ_16K;
+			} else {
+				omap_sram_size = 0x8000; /* 32K */
+			}
+		} else {
+			omap_sram_start = OMAP2_SRAM_PUB_PA;
+			omap_sram_size = 0x800; /* 2K */
+		}
+	} else {
+		if (cpu_is_omap34xx()) {
+			omap_sram_start = OMAP3_SRAM_PA;
+			omap_sram_size = 0x10000; /* 64K */
+		} else {
+			omap_sram_start = OMAP2_SRAM_PA;
+			if (cpu_is_omap242x())
+				omap_sram_size = 0xa0000; /* 640K */
+			else if (cpu_is_omap243x())
+				omap_sram_size = 0x10000; /* 64K */
+		}
+	}
+}
+
+/*
+ * Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
+ */
+static void __init omap2_map_sram(void)
+{
+	int cached = 1;
+
+	if (cpu_is_omap34xx()) {
+		/*
+		 * SRAM must be marked as non-cached on OMAP3 since the
+		 * CORE DPLL M2 divider change code (in SRAM) runs with the
+		 * SDRAM controller disabled, and if it is marked cached,
+		 * the ARM may attempt to write cache lines back to SDRAM
+		 * which will cause the system to hang.
+		 */
+		cached = 0;
+	}
+
+	omap_map_sram(omap_sram_start, omap_sram_size,
+			omap_sram_skip, cached);
+}
+
+static void (*_omap2_sram_ddr_init)(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+			      u32 base_cs, u32 force_unlock);
+
+void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
+		   u32 base_cs, u32 force_unlock)
+{
+	BUG_ON(!_omap2_sram_ddr_init);
+	_omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
+			     base_cs, force_unlock);
+}
+
+static void (*_omap2_sram_reprogram_sdrc)(u32 perf_level, u32 dll_val,
+					  u32 mem_type);
+
+void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
+{
+	BUG_ON(!_omap2_sram_reprogram_sdrc);
+	_omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
+}
+
+static u32 (*_omap2_set_prcm)(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass);
+
+u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
+{
+	BUG_ON(!_omap2_set_prcm);
+	return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
+}
+
+#ifdef CONFIG_SOC_OMAP2420
+static int __init omap242x_sram_init(void)
+{
+	_omap2_sram_ddr_init = omap_sram_push(omap242x_sram_ddr_init,
+					omap242x_sram_ddr_init_sz);
+
+	_omap2_sram_reprogram_sdrc = omap_sram_push(omap242x_sram_reprogram_sdrc,
+					    omap242x_sram_reprogram_sdrc_sz);
+
+	_omap2_set_prcm = omap_sram_push(omap242x_sram_set_prcm,
+					 omap242x_sram_set_prcm_sz);
+
+	return 0;
+}
+#else
+static inline int omap242x_sram_init(void)
+{
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAP2430
+static int __init omap243x_sram_init(void)
+{
+	_omap2_sram_ddr_init = omap_sram_push(omap243x_sram_ddr_init,
+					omap243x_sram_ddr_init_sz);
+
+	_omap2_sram_reprogram_sdrc = omap_sram_push(omap243x_sram_reprogram_sdrc,
+					    omap243x_sram_reprogram_sdrc_sz);
+
+	_omap2_set_prcm = omap_sram_push(omap243x_sram_set_prcm,
+					 omap243x_sram_set_prcm_sz);
+
+	return 0;
+}
+#else
+static inline int omap243x_sram_init(void)
+{
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+
+void omap3_sram_restore_context(void)
+{
+	omap_sram_reset();
+
+	omap_push_sram_idle();
+}
+
+static inline int omap34xx_sram_init(void)
+{
+	omap3_sram_restore_context();
+	return 0;
+}
+#else
+static inline int omap34xx_sram_init(void)
+{
+	return 0;
+}
+#endif /* CONFIG_ARCH_OMAP3 */
+
+int __init omap_sram_init(void)
+{
+	omap_detect_sram();
+	omap2_map_sram();
+
+	if (cpu_is_omap242x())
+		omap242x_sram_init();
+	else if (cpu_is_omap2430())
+		omap243x_sram_init();
+	else if (cpu_is_omap34xx())
+		omap34xx_sram_init();
+
+	return 0;
+}