diff options
Diffstat (limited to 'arch/m68k/ifpsp060/src/isp.S')
| -rw-r--r-- | arch/m68k/ifpsp060/src/isp.S | 4299 |
1 files changed, 4299 insertions, 0 deletions
diff --git a/arch/m68k/ifpsp060/src/isp.S b/arch/m68k/ifpsp060/src/isp.S new file mode 100644 index 000000000..29a9f8629 --- /dev/null +++ b/arch/m68k/ifpsp060/src/isp.S @@ -0,0 +1,4299 @@ +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP +M68000 Hi-Performance Microprocessor Division +M68060 Software Package +Production Release P1.00 -- October 10, 1994 + +M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. + +THE SOFTWARE is provided on an "AS IS" basis and without warranty. +To the maximum extent permitted by applicable law, +MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, +INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE +and any warranty against infringement with regard to the SOFTWARE +(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials. + +To the maximum extent permitted by applicable law, +IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER +(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, +BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) +ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE. +Motorola assumes no responsibility for the maintenance and support of the SOFTWARE. + +You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE +so long as this entire notice is retained without alteration in any modified and/or +redistributed versions, and that such modified versions are clearly identified as such. +No licenses are granted by implication, estoppel or otherwise under any patents +or trademarks of Motorola, Inc. +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +# ireal.s: +# This file is appended to the top of the 060ISP package +# and contains the entry points into the package. The user, in +# effect, branches to one of the branch table entries located +# after _060ISP_TABLE. +# Also, subroutine stubs exist in this file (_isp_done for +# example) that are referenced by the ISP package itself in order +# to call a given routine. The stub routine actually performs the +# callout. The ISP code does a "bsr" to the stub routine. This +# extra layer of hierarchy adds a slight performance penalty but +# it makes the ISP code easier to read and more mainatinable. +# + +set _off_chk, 0x00 +set _off_divbyzero, 0x04 +set _off_trace, 0x08 +set _off_access, 0x0c +set _off_done, 0x10 + +set _off_cas, 0x14 +set _off_cas2, 0x18 +set _off_lock, 0x1c +set _off_unlock, 0x20 + +set _off_imr, 0x40 +set _off_dmr, 0x44 +set _off_dmw, 0x48 +set _off_irw, 0x4c +set _off_irl, 0x50 +set _off_drb, 0x54 +set _off_drw, 0x58 +set _off_drl, 0x5c +set _off_dwb, 0x60 +set _off_dww, 0x64 +set _off_dwl, 0x68 + +_060ISP_TABLE: + +# Here's the table of ENTRY POINTS for those linking the package. + bra.l _isp_unimp + short 0x0000 + + bra.l _isp_cas + short 0x0000 + + bra.l _isp_cas2 + short 0x0000 + + bra.l _isp_cas_finish + short 0x0000 + + bra.l _isp_cas2_finish + short 0x0000 + + bra.l _isp_cas_inrange + short 0x0000 + + bra.l _isp_cas_terminate + short 0x0000 + + bra.l _isp_cas_restart + short 0x0000 + + space 64 + +############################################################# + + global _real_chk +_real_chk: + mov.l %d0,-(%sp) + mov.l (_060ISP_TABLE-0x80+_off_chk,%pc),%d0 + pea.l (_060ISP_TABLE-0x80,%pc,%d0) + mov.l 0x4(%sp),%d0 + rtd &0x4 + + global _real_divbyzero +_real_divbyzero: + mov.l %d0,-(%sp) + mov.l (_060ISP_TABLE-0x80+_off_divbyzero,%pc),%d0 + pea.l (_060ISP_TABLE-0x80,%pc,%d0) + mov.l 0x4(%sp),%d0 + rtd &0x4 + + global _real_trace +_real_trace: + mov.l %d0,-(%sp) + mov.l (_060ISP_TABLE-0x80+_off_trace,%pc),%d0 + pea.l (_060ISP_TABLE-0x80,%pc,%d0) + mov.l 0x4(%sp),%d0 + rtd &0x4 + + global _real_access +_real_access: + mov.l %d0,-(%sp) + mov.l (_060ISP_TABLE-0x80+_off_access,%pc),%d0 + pea.l (_060ISP_TABLE-0x80,%pc,%d0) + mov.l 0x4(%sp),%d0 + rtd &0x4 + + global _isp_done +_isp_done: + mov.l %d0,-(%sp) + mov.l (_060ISP_TABLE-0x80+_off_done,%pc),%d0 + pea.l (_060ISP_TABLE-0x80,%pc,%d0) + mov.l 0x4(%sp),%d0 + rtd &0x4 + +####################################### + + global _real_cas +_real_cas: + mov.l %d0,-(%sp) + mov.l (_060ISP_TABLE-0x80+_off_cas,%pc),%d0 + pea.l (_060ISP_TABLE-0x80,%pc,%d0) + mov.l 0x4(%sp),%d0 + rtd &0x4 + + global _real_cas2 +_real_cas2: + mov.l %d0,-(%sp) + mov.l (_060ISP_TABLE-0x80+_off_cas2,%pc),%d0 + pea.l (_060ISP_TABLE-0x80,%pc,%d0) + mov.l 0x4(%sp),%d0 + rtd &0x4 + + global _real_lock_page +_real_lock_page: + mov.l %d0,-(%sp) + mov.l (_060ISP_TABLE-0x80+_off_lock,%pc),%d0 + pea.l (_060ISP_TABLE-0x80,%pc,%d0) + mov.l 0x4(%sp),%d0 + rtd &0x4 + + global _real_unlock_page +_real_unlock_page: + mov.l %d0,-(%sp) + mov.l (_060ISP_TABLE-0x80+_off_unlock,%pc),%d0 + pea.l (_060ISP_TABLE-0x80,%pc,%d0) + mov.l 0x4(%sp),%d0 + rtd &0x4 + +####################################### + + global _imem_read +_imem_read: + mov.l %d0,-(%sp) + mov.l (_060ISP_TABLE-0x80+_off_imr,%pc),%d0 + pea.l (_060ISP_TABLE-0x80,%pc,%d0) + mov.l 0x4(%sp),%d0 + rtd &0x4 + + global _dmem_read +_dmem_read: + mov.l %d0,-(%sp) + mov.l (_060ISP_TABLE-0x80+_off_dmr,%pc),%d0 + pea.l (_060ISP_TABLE-0x80,%pc,%d0) + mov.l 0x4(%sp),%d0 + rtd &0x4 + + global _dmem_write +_dmem_write: + mov.l %d0,-(%sp) + mov.l (_060ISP_TABLE-0x80+_off_dmw,%pc),%d0 + pea.l (_060ISP_TABLE-0x80,%pc,%d0) + mov.l 0x4(%sp),%d0 + rtd &0x4 + + global _imem_read_word +_imem_read_word: + mov.l %d0,-(%sp) + mov.l (_060ISP_TABLE-0x80+_off_irw,%pc),%d0 + pea.l (_060ISP_TABLE-0x80,%pc,%d0) + mov.l 0x4(%sp),%d0 + rtd &0x4 + + global _imem_read_long +_imem_read_long: + mov.l %d0,-(%sp) + mov.l (_060ISP_TABLE-0x80+_off_irl,%pc),%d0 + pea.l (_060ISP_TABLE-0x80,%pc,%d0) + mov.l 0x4(%sp),%d0 + rtd &0x4 + + global _dmem_read_byte +_dmem_read_byte: + mov.l %d0,-(%sp) + mov.l (_060ISP_TABLE-0x80+_off_drb,%pc),%d0 + pea.l (_060ISP_TABLE-0x80,%pc,%d0) + mov.l 0x4(%sp),%d0 + rtd &0x4 + + global _dmem_read_word +_dmem_read_word: + mov.l %d0,-(%sp) + mov.l (_060ISP_TABLE-0x80+_off_drw,%pc),%d0 + pea.l (_060ISP_TABLE-0x80,%pc,%d0) + mov.l 0x4(%sp),%d0 + rtd &0x4 + + global _dmem_read_long +_dmem_read_long: + mov.l %d0,-(%sp) + mov.l (_060ISP_TABLE-0x80+_off_drl,%pc),%d0 + pea.l (_060ISP_TABLE-0x80,%pc,%d0) + mov.l 0x4(%sp),%d0 + rtd &0x4 + + global _dmem_write_byte +_dmem_write_byte: + mov.l %d0,-(%sp) + mov.l (_060ISP_TABLE-0x80+_off_dwb,%pc),%d0 + pea.l (_060ISP_TABLE-0x80,%pc,%d0) + mov.l 0x4(%sp),%d0 + rtd &0x4 + + global _dmem_write_word +_dmem_write_word: + mov.l %d0,-(%sp) + mov.l (_060ISP_TABLE-0x80+_off_dww,%pc),%d0 + pea.l (_060ISP_TABLE-0x80,%pc,%d0) + mov.l 0x4(%sp),%d0 + rtd &0x4 + + global _dmem_write_long +_dmem_write_long: + mov.l %d0,-(%sp) + mov.l (_060ISP_TABLE-0x80+_off_dwl,%pc),%d0 + pea.l (_060ISP_TABLE-0x80,%pc,%d0) + mov.l 0x4(%sp),%d0 + rtd &0x4 + +# +# This file contains a set of define statements for constants +# in oreder to promote readability within the core code itself. +# + +set LOCAL_SIZE, 96 # stack frame size(bytes) +set LV, -LOCAL_SIZE # stack offset + +set EXC_ISR, 0x4 # stack status register +set EXC_IPC, 0x6 # stack pc +set EXC_IVOFF, 0xa # stacked vector offset + +set EXC_AREGS, LV+64 # offset of all address regs +set EXC_DREGS, LV+32 # offset of all data regs + +set EXC_A7, EXC_AREGS+(7*4) # offset of a7 +set EXC_A6, EXC_AREGS+(6*4) # offset of a6 +set EXC_A5, EXC_AREGS+(5*4) # offset of a5 +set EXC_A4, EXC_AREGS+(4*4) # offset of a4 +set EXC_A3, EXC_AREGS+(3*4) # offset of a3 +set EXC_A2, EXC_AREGS+(2*4) # offset of a2 +set EXC_A1, EXC_AREGS+(1*4) # offset of a1 +set EXC_A0, EXC_AREGS+(0*4) # offset of a0 +set EXC_D7, EXC_DREGS+(7*4) # offset of d7 +set EXC_D6, EXC_DREGS+(6*4) # offset of d6 +set EXC_D5, EXC_DREGS+(5*4) # offset of d5 +set EXC_D4, EXC_DREGS+(4*4) # offset of d4 +set EXC_D3, EXC_DREGS+(3*4) # offset of d3 +set EXC_D2, EXC_DREGS+(2*4) # offset of d2 +set EXC_D1, EXC_DREGS+(1*4) # offset of d1 +set EXC_D0, EXC_DREGS+(0*4) # offset of d0 + +set EXC_TEMP, LV+16 # offset of temp stack space + +set EXC_SAVVAL, LV+12 # offset of old areg value +set EXC_SAVREG, LV+11 # offset of old areg index + +set SPCOND_FLG, LV+10 # offset of spc condition flg + +set EXC_CC, LV+8 # offset of cc register +set EXC_EXTWPTR, LV+4 # offset of current PC +set EXC_EXTWORD, LV+2 # offset of current ext opword +set EXC_OPWORD, LV+0 # offset of current opword + +########################### +# SPecial CONDition FLaGs # +########################### +set mia7_flg, 0x04 # (a7)+ flag +set mda7_flg, 0x08 # -(a7) flag +set ichk_flg, 0x10 # chk exception flag +set idbyz_flg, 0x20 # divbyzero flag +set restore_flg, 0x40 # restore -(an)+ flag +set immed_flg, 0x80 # immediate data flag + +set mia7_bit, 0x2 # (a7)+ bit +set mda7_bit, 0x3 # -(a7) bit +set ichk_bit, 0x4 # chk exception bit +set idbyz_bit, 0x5 # divbyzero bit +set restore_bit, 0x6 # restore -(a7)+ bit +set immed_bit, 0x7 # immediate data bit + +######### +# Misc. # +######### +set BYTE, 1 # len(byte) == 1 byte +set WORD, 2 # len(word) == 2 bytes +set LONG, 4 # len(longword) == 4 bytes + +######################################################################### +# XDEF **************************************************************** # +# _isp_unimp(): 060ISP entry point for Unimplemented Instruction # +# # +# This handler should be the first code executed upon taking the # +# "Unimplemented Integer Instruction" exception in an operating # +# system. # +# # +# XREF **************************************************************** # +# _imem_read_{word,long}() - read instruction word/longword # +# _mul64() - emulate 64-bit multiply # +# _div64() - emulate 64-bit divide # +# _moveperipheral() - emulate "movep" # +# _compandset() - emulate misaligned "cas" # +# _compandset2() - emulate "cas2" # +# _chk2_cmp2() - emulate "cmp2" and "chk2" # +# _isp_done() - "callout" for normal final exit # +# _real_trace() - "callout" for Trace exception # +# _real_chk() - "callout" for Chk exception # +# _real_divbyzero() - "callout" for DZ exception # +# _real_access() - "callout" for access error exception # +# # +# INPUT *************************************************************** # +# - The system stack contains the Unimp Int Instr stack frame # +# # +# OUTPUT ************************************************************** # +# If Trace exception: # +# - The system stack changed to contain Trace exc stack frame # +# If Chk exception: # +# - The system stack changed to contain Chk exc stack frame # +# If DZ exception: # +# - The system stack changed to contain DZ exc stack frame # +# If access error exception: # +# - The system stack changed to contain access err exc stk frame # +# Else: # +# - Results saved as appropriate # +# # +# ALGORITHM *********************************************************** # +# This handler fetches the first instruction longword from # +# memory and decodes it to determine which of the unimplemented # +# integer instructions caused this exception. This handler then calls # +# one of _mul64(), _div64(), _moveperipheral(), _compandset(), # +# _compandset2(), or _chk2_cmp2() as appropriate. # +# Some of these instructions, by their nature, may produce other # +# types of exceptions. "div" can produce a divide-by-zero exception, # +# and "chk2" can cause a "Chk" exception. In both cases, the current # +# exception stack frame must be converted to an exception stack frame # +# of the correct exception type and an exit must be made through # +# _real_divbyzero() or _real_chk() as appropriate. In addition, all # +# instructions may be executing while Trace is enabled. If so, then # +# a Trace exception stack frame must be created and an exit made # +# through _real_trace(). # +# Meanwhile, if any read or write to memory using the # +# _mem_{read,write}() "callout"s returns a failing value, then an # +# access error frame must be created and an exit made through # +# _real_access(). # +# If none of these occur, then a normal exit is made through # +# _isp_done(). # +# # +# This handler, upon entry, saves almost all user-visible # +# address and data registers to the stack. Although this may seem to # +# cause excess memory traffic, it was found that due to having to # +# access these register files for things like data retrieval and <ea> # +# calculations, it was more efficient to have them on the stack where # +# they could be accessed by indexing rather than to make subroutine # +# calls to retrieve a register of a particular index. # +# # +######################################################################### + + global _isp_unimp +_isp_unimp: + link.w %a6,&-LOCAL_SIZE # create room for stack frame + + movm.l &0x3fff,EXC_DREGS(%a6) # store d0-d7/a0-a5 + mov.l (%a6),EXC_A6(%a6) # store a6 + + btst &0x5,EXC_ISR(%a6) # from s or u mode? + bne.b uieh_s # supervisor mode +uieh_u: + mov.l %usp,%a0 # fetch user stack pointer + mov.l %a0,EXC_A7(%a6) # store a7 + bra.b uieh_cont +uieh_s: + lea 0xc(%a6),%a0 + mov.l %a0,EXC_A7(%a6) # store corrected sp + +############################################################################### + +uieh_cont: + clr.b SPCOND_FLG(%a6) # clear "special case" flag + + mov.w EXC_ISR(%a6),EXC_CC(%a6) # store cc copy on stack + mov.l EXC_IPC(%a6),EXC_EXTWPTR(%a6) # store extwptr on stack + +# +# fetch the opword and first extension word pointed to by the stacked pc +# and store them to the stack for now +# + mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr + addq.l &0x4,EXC_EXTWPTR(%a6) # incr instruction ptr + bsr.l _imem_read_long # fetch opword & extword + mov.l %d0,EXC_OPWORD(%a6) # store extword on stack + + +######################################################################### +# muls.l 0100 1100 00 |<ea>| 0*** 1100 0000 0*** # +# mulu.l 0100 1100 00 |<ea>| 0*** 0100 0000 0*** # +# # +# divs.l 0100 1100 01 |<ea>| 0*** 1100 0000 0*** # +# divu.l 0100 1100 01 |<ea>| 0*** 0100 0000 0*** # +# # +# movep.w m2r 0000 ***1 00 001*** | <displacement> | # +# movep.l m2r 0000 ***1 01 001*** | <displacement> | # +# movep.w r2m 0000 ***1 10 001*** | <displacement> | # +# movep.l r2m 0000 ***1 11 001*** | <displacement> | # +# # +# cas.w 0000 1100 11 |<ea>| 0000 000* **00 0*** # +# cas.l 0000 1110 11 |<ea>| 0000 000* **00 0*** # +# # +# cas2.w 0000 1100 11 111100 **** 000* **00 0*** # +# **** 000* **00 0*** # +# cas2.l 0000 1110 11 111100 **** 000* **00 0*** # +# **** 000* **00 0*** # +# # +# chk2.b 0000 0000 11 |<ea>| **** 1000 0000 0000 # +# chk2.w 0000 0010 11 |<ea>| **** 1000 0000 0000 # +# chk2.l 0000 0100 11 |<ea>| **** 1000 0000 0000 # +# # +# cmp2.b 0000 0000 11 |<ea>| **** 0000 0000 0000 # +# cmp2.w 0000 0010 11 |<ea>| **** 0000 0000 0000 # +# cmp2.l 0000 0100 11 |<ea>| **** 0000 0000 0000 # +######################################################################### + +# +# using bit 14 of the operation word, separate into 2 groups: +# (group1) mul64, div64 +# (group2) movep, chk2, cmp2, cas2, cas +# + btst &0x1e,%d0 # group1 or group2 + beq.b uieh_group2 # go handle group2 + +# +# now, w/ group1, make mul64's decode the fastest since it will +# most likely be used the most. +# +uieh_group1: + btst &0x16,%d0 # test for div64 + bne.b uieh_div64 # go handle div64 + +uieh_mul64: +# mul64() may use ()+ addressing and may, therefore, alter a7 + + bsr.l _mul64 # _mul64() + + btst &0x5,EXC_ISR(%a6) # supervisor mode? + beq.w uieh_done + btst &mia7_bit,SPCOND_FLG(%a6) # was a7 changed? + beq.w uieh_done # no + btst &0x7,EXC_ISR(%a6) # is trace enabled? + bne.w uieh_trace_a7 # yes + bra.w uieh_a7 # no + +uieh_div64: +# div64() may use ()+ addressing and may, therefore, alter a7. +# div64() may take a divide by zero exception. + + bsr.l _div64 # _div64() + +# here, we sort out all of the special cases that may have happened. + btst &mia7_bit,SPCOND_FLG(%a6) # was a7 changed? + bne.b uieh_div64_a7 # yes +uieh_div64_dbyz: + btst &idbyz_bit,SPCOND_FLG(%a6) # did divide-by-zero occur? + bne.w uieh_divbyzero # yes + bra.w uieh_done # no +uieh_div64_a7: + btst &0x5,EXC_ISR(%a6) # supervisor mode? + beq.b uieh_div64_dbyz # no +# here, a7 has been incremented by 4 bytes in supervisor mode. we still +# may have the following 3 cases: +# (i) (a7)+ +# (ii) (a7)+; trace +# (iii) (a7)+; divide-by-zero +# + btst &idbyz_bit,SPCOND_FLG(%a6) # did divide-by-zero occur? + bne.w uieh_divbyzero_a7 # yes + tst.b EXC_ISR(%a6) # no; is trace enabled? + bmi.w uieh_trace_a7 # yes + bra.w uieh_a7 # no + +# +# now, w/ group2, make movep's decode the fastest since it will +# most likely be used the most. +# +uieh_group2: + btst &0x18,%d0 # test for not movep + beq.b uieh_not_movep + + + bsr.l _moveperipheral # _movep() + bra.w uieh_done + +uieh_not_movep: + btst &0x1b,%d0 # test for chk2,cmp2 + beq.b uieh_chk2cmp2 # go handle chk2,cmp2 + + swap %d0 # put opword in lo word + cmpi.b %d0,&0xfc # test for cas2 + beq.b uieh_cas2 # go handle cas2 + +uieh_cas: + + bsr.l _compandset # _cas() + +# the cases of "cas Dc,Du,(a7)+" and "cas Dc,Du,-(a7)" used from supervisor +# mode are simply not considered valid and therefore are not handled. + + bra.w uieh_done + +uieh_cas2: + + mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr + addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr + bsr.l _imem_read_word # read extension word + + tst.l %d1 # ifetch error? + bne.w isp_iacc # yes + + bsr.l _compandset2 # _cas2() + bra.w uieh_done + +uieh_chk2cmp2: +# chk2 may take a chk exception + + bsr.l _chk2_cmp2 # _chk2_cmp2() + +# here we check to see if a chk trap should be taken + cmpi.b SPCOND_FLG(%a6),&ichk_flg + bne.w uieh_done + bra.b uieh_chk_trap + +########################################################################### + +# +# the required emulation has been completed. now, clean up the necessary stack +# info and prepare for rte +# +uieh_done: + mov.b EXC_CC+1(%a6),EXC_ISR+1(%a6) # insert new ccodes + +# if exception occurred in user mode, then we have to restore a7 in case it +# changed. we don't have to update a7 for supervisor mose because that case +# doesn't flow through here + btst &0x5,EXC_ISR(%a6) # user or supervisor? + bne.b uieh_finish # supervisor + + mov.l EXC_A7(%a6),%a0 # fetch user stack pointer + mov.l %a0,%usp # restore it + +uieh_finish: + movm.l EXC_DREGS(%a6),&0x3fff # restore d0-d7/a0-a5 + + btst &0x7,EXC_ISR(%a6) # is trace mode on? + bne.b uieh_trace # yes;go handle trace mode + + mov.l EXC_EXTWPTR(%a6),EXC_IPC(%a6) # new pc on stack frame + mov.l EXC_A6(%a6),(%a6) # prepare new a6 for unlink + unlk %a6 # unlink stack frame + bra.l _isp_done + +# +# The instruction that was just emulated was also being traced. The trace +# trap for this instruction will be lost unless we jump to the trace handler. +# So, here we create a Trace Exception format number two exception stack +# frame from the Unimplemented Integer Intruction Exception stack frame +# format number zero and jump to the user supplied hook "_real_trace()". +# +# UIEH FRAME TRACE FRAME +# ***************** ***************** +# * 0x0 * 0x0f4 * * Current * +# ***************** * PC * +# * Current * ***************** +# * PC * * 0x2 * 0x024 * +# ***************** ***************** +# * SR * * Next * +# ***************** * PC * +# ->* Old * ***************** +# from link -->* A6 * * SR * +# ***************** ***************** +# /* A7 * * New * <-- for final unlink +# / * * * A6 * +# link frame < ***************** ***************** +# \ ~ ~ ~ ~ +# \***************** ***************** +# +uieh_trace: + mov.l EXC_A6(%a6),-0x4(%a6) + mov.w EXC_ISR(%a6),0x0(%a6) + mov.l EXC_IPC(%a6),0x8(%a6) + mov.l EXC_EXTWPTR(%a6),0x2(%a6) + mov.w &0x2024,0x6(%a6) + sub.l &0x4,%a6 + unlk %a6 + bra.l _real_trace + +# +# UIEH FRAME CHK FRAME +# ***************** ***************** +# * 0x0 * 0x0f4 * * Current * +# ***************** * PC * +# * Current * ***************** +# * PC * * 0x2 * 0x018 * +# ***************** ***************** +# * SR * * Next * +# ***************** * PC * +# (4 words) ***************** +# * SR * +# ***************** +# (6 words) +# +# the chk2 instruction should take a chk trap. so, here we must create a +# chk stack frame from an unimplemented integer instruction exception frame +# and jump to the user supplied entry point "_real_chk()". +# +uieh_chk_trap: + mov.b EXC_CC+1(%a6),EXC_ISR+1(%a6) # insert new ccodes + movm.l EXC_DREGS(%a6),&0x3fff # restore d0-d7/a0-a5 + + mov.w EXC_ISR(%a6),(%a6) # put new SR on stack + mov.l EXC_IPC(%a6),0x8(%a6) # put "Current PC" on stack + mov.l EXC_EXTWPTR(%a6),0x2(%a6) # put "Next PC" on stack + mov.w &0x2018,0x6(%a6) # put Vector Offset on stack + + mov.l EXC_A6(%a6),%a6 # restore a6 + add.l &LOCAL_SIZE,%sp # clear stack frame + + bra.l _real_chk + +# +# UIEH FRAME DIVBYZERO FRAME +# ***************** ***************** +# * 0x0 * 0x0f4 * * Current * +# ***************** * PC * +# * Current * ***************** +# * PC * * 0x2 * 0x014 * +# ***************** ***************** +# * SR * * Next * +# ***************** * PC * +# (4 words) ***************** +# * SR * +# ***************** +# (6 words) +# +# the divide instruction should take an integer divide by zero trap. so, here +# we must create a divbyzero stack frame from an unimplemented integer +# instruction exception frame and jump to the user supplied entry point +# "_real_divbyzero()". +# +uieh_divbyzero: + mov.b EXC_CC+1(%a6),EXC_ISR+1(%a6) # insert new ccodes + movm.l EXC_DREGS(%a6),&0x3fff # restore d0-d7/a0-a5 + + mov.w EXC_ISR(%a6),(%a6) # put new SR on stack + mov.l EXC_IPC(%a6),0x8(%a6) # put "Current PC" on stack + mov.l EXC_EXTWPTR(%a6),0x2(%a6) # put "Next PC" on stack + mov.w &0x2014,0x6(%a6) # put Vector Offset on stack + + mov.l EXC_A6(%a6),%a6 # restore a6 + add.l &LOCAL_SIZE,%sp # clear stack frame + + bra.l _real_divbyzero + +# +# DIVBYZERO FRAME +# ***************** +# * Current * +# UIEH FRAME * PC * +# ***************** ***************** +# * 0x0 * 0x0f4 * * 0x2 * 0x014 * +# ***************** ***************** +# * Current * * Next * +# * PC * * PC * +# ***************** ***************** +# * SR * * SR * +# ***************** ***************** +# (4 words) (6 words) +# +# the divide instruction should take an integer divide by zero trap. so, here +# we must create a divbyzero stack frame from an unimplemented integer +# instruction exception frame and jump to the user supplied entry point +# "_real_divbyzero()". +# +# However, we must also deal with the fact that (a7)+ was used from supervisor +# mode, thereby shifting the stack frame up 4 bytes. +# +uieh_divbyzero_a7: + mov.b EXC_CC+1(%a6),EXC_ISR+1(%a6) # insert new ccodes + movm.l EXC_DREGS(%a6),&0x3fff # restore d0-d7/a0-a5 + + mov.l EXC_IPC(%a6),0xc(%a6) # put "Current PC" on stack + mov.w &0x2014,0xa(%a6) # put Vector Offset on stack + mov.l EXC_EXTWPTR(%a6),0x6(%a6) # put "Next PC" on stack + + mov.l EXC_A6(%a6),%a6 # restore a6 + add.l &4+LOCAL_SIZE,%sp # clear stack frame + + bra.l _real_divbyzero + +# +# TRACE FRAME +# ***************** +# * Current * +# UIEH FRAME * PC * +# ***************** ***************** +# * 0x0 * 0x0f4 * * 0x2 * 0x024 * +# ***************** ***************** +# * Current * * Next * +# * PC * * PC * +# ***************** ***************** +# * SR * * SR * +# ***************** ***************** +# (4 words) (6 words) +# +# +# The instruction that was just emulated was also being traced. The trace +# trap for this instruction will be lost unless we jump to the trace handler. +# So, here we create a Trace Exception format number two exception stack +# frame from the Unimplemented Integer Intruction Exception stack frame +# format number zero and jump to the user supplied hook "_real_trace()". +# +# However, we must also deal with the fact that (a7)+ was used from supervisor +# mode, thereby shifting the stack frame up 4 bytes. +# +uieh_trace_a7: + mov.b EXC_CC+1(%a6),EXC_ISR+1(%a6) # insert new ccodes + movm.l EXC_DREGS(%a6),&0x3fff # restore d0-d7/a0-a5 + + mov.l EXC_IPC(%a6),0xc(%a6) # put "Current PC" on stack + mov.w &0x2024,0xa(%a6) # put Vector Offset on stack + mov.l EXC_EXTWPTR(%a6),0x6(%a6) # put "Next PC" on stack + + mov.l EXC_A6(%a6),%a6 # restore a6 + add.l &4+LOCAL_SIZE,%sp # clear stack frame + + bra.l _real_trace + +# +# UIEH FRAME +# ***************** +# * 0x0 * 0x0f4 * +# UIEH FRAME ***************** +# ***************** * Next * +# * 0x0 * 0x0f4 * * PC * +# ***************** ***************** +# * Current * * SR * +# * PC * ***************** +# ***************** (4 words) +# * SR * +# ***************** +# (4 words) +uieh_a7: + mov.b EXC_CC+1(%a6),EXC_ISR+1(%a6) # insert new ccodes + movm.l EXC_DREGS(%a6),&0x3fff # restore d0-d7/a0-a5 + + mov.w &0x00f4,0xe(%a6) # put Vector Offset on stack + mov.l EXC_EXTWPTR(%a6),0xa(%a6) # put "Next PC" on stack + mov.w EXC_ISR(%a6),0x8(%a6) # put SR on stack + + mov.l EXC_A6(%a6),%a6 # restore a6 + add.l &8+LOCAL_SIZE,%sp # clear stack frame + bra.l _isp_done + +########## + +# this is the exit point if a data read or write fails. +# a0 = failing address +# d0 = fslw +isp_dacc: + mov.l %a0,(%a6) # save address + mov.l %d0,-0x4(%a6) # save partial fslw + + lea -64(%a6),%sp + movm.l (%sp)+,&0x7fff # restore d0-d7/a0-a6 + + mov.l 0xc(%sp),-(%sp) # move voff,hi(pc) + mov.l 0x4(%sp),0x10(%sp) # store fslw + mov.l 0xc(%sp),0x4(%sp) # store sr,lo(pc) + mov.l 0x8(%sp),0xc(%sp) # store address + mov.l (%sp)+,0x4(%sp) # store voff,hi(pc) + mov.w &0x4008,0x6(%sp) # store new voff + + bra.b isp_acc_exit + +# this is the exit point if an instruction word read fails. +# FSLW: +# misaligned = true +# read = true +# size = word +# instruction = true +# software emulation error = true +isp_iacc: + movm.l EXC_DREGS(%a6),&0x3fff # restore d0-d7/a0-a5 + unlk %a6 # unlink frame + sub.w &0x8,%sp # make room for acc frame + mov.l 0x8(%sp),(%sp) # store sr,lo(pc) + mov.w 0xc(%sp),0x4(%sp) # store hi(pc) + mov.w &0x4008,0x6(%sp) # store new voff + mov.l 0x2(%sp),0x8(%sp) # store address (=pc) + mov.l &0x09428001,0xc(%sp) # store fslw + +isp_acc_exit: + btst &0x5,(%sp) # user or supervisor? + beq.b isp_acc_exit2 # user + bset &0x2,0xd(%sp) # set supervisor TM bit +isp_acc_exit2: + bra.l _real_access + +# if the addressing mode was (an)+ or -(an), the address register must +# be restored to its pre-exception value before entering _real_access. +isp_restore: + cmpi.b SPCOND_FLG(%a6),&restore_flg # do we need a restore? + bne.b isp_restore_done # no + clr.l %d0 + mov.b EXC_SAVREG(%a6),%d0 # regno to restore + mov.l EXC_SAVVAL(%a6),(EXC_AREGS,%a6,%d0.l*4) # restore value +isp_restore_done: + rts + +######################################################################### +# XDEF **************************************************************** # +# _calc_ea(): routine to calculate effective address # +# # +# XREF **************************************************************** # +# _imem_read_word() - read instruction word # +# _imem_read_long() - read instruction longword # +# _dmem_read_long() - read data longword (for memory indirect) # +# isp_iacc() - handle instruction access error exception # +# isp_dacc() - handle data access error exception # +# # +# INPUT *************************************************************** # +# d0 = number of bytes related to effective address (w,l) # +# # +# OUTPUT ************************************************************** # +# If exiting through isp_dacc... # +# a0 = failing address # +# d0 = FSLW # +# elsif exiting though isp_iacc... # +# none # +# else # +# a0 = effective address # +# # +# ALGORITHM *********************************************************** # +# The effective address type is decoded from the opword residing # +# on the stack. A jump table is used to vector to a routine for the # +# appropriate mode. Since none of the emulated integer instructions # +# uses byte-sized operands, only handle word and long operations. # +# # +# Dn,An - shouldn't enter here # +# (An) - fetch An value from stack # +# -(An) - fetch An value from stack; return decr value; # +# place decr value on stack; store old value in case of # +# future access error; if -(a7), set mda7_flg in # +# SPCOND_FLG # +# (An)+ - fetch An value from stack; return value; # +# place incr value on stack; store old value in case of # +# future access error; if (a7)+, set mia7_flg in # +# SPCOND_FLG # +# (d16,An) - fetch An value from stack; read d16 using # +# _imem_read_word(); fetch may fail -> branch to # +# isp_iacc() # +# (xxx).w,(xxx).l - use _imem_read_{word,long}() to fetch # +# address; fetch may fail # +# #<data> - return address of immediate value; set immed_flg # +# in SPCOND_FLG # +# (d16,PC) - fetch stacked PC value; read d16 using # +# _imem_read_word(); fetch may fail -> branch to # +# isp_iacc() # +# everything else - read needed displacements as appropriate w/ # +# _imem_read_{word,long}(); read may fail; if memory # +# indirect, read indirect address using # +# _dmem_read_long() which may also fail # +# # +######################################################################### + + global _calc_ea +_calc_ea: + mov.l %d0,%a0 # move # bytes to a0 + +# MODE and REG are taken from the EXC_OPWORD. + mov.w EXC_OPWORD(%a6),%d0 # fetch opcode word + mov.w %d0,%d1 # make a copy + + andi.w &0x3f,%d0 # extract mode field + andi.l &0x7,%d1 # extract reg field + +# jump to the corresponding function for each {MODE,REG} pair. + mov.w (tbl_ea_mode.b,%pc,%d0.w*2), %d0 # fetch jmp distance + jmp (tbl_ea_mode.b,%pc,%d0.w*1) # jmp to correct ea mode + + swbeg &64 +tbl_ea_mode: + short tbl_ea_mode - tbl_ea_mode + short tbl_ea_mode - tbl_ea_mode + short tbl_ea_mode - tbl_ea_mode + short tbl_ea_mode - tbl_ea_mode + short tbl_ea_mode - tbl_ea_mode + short tbl_ea_mode - tbl_ea_mode + short tbl_ea_mode - tbl_ea_mode + short tbl_ea_mode - tbl_ea_mode + + short tbl_ea_mode - tbl_ea_mode + short tbl_ea_mode - tbl_ea_mode + short tbl_ea_mode - tbl_ea_mode + short tbl_ea_mode - tbl_ea_mode + short tbl_ea_mode - tbl_ea_mode + short tbl_ea_mode - tbl_ea_mode + short tbl_ea_mode - tbl_ea_mode + short tbl_ea_mode - tbl_ea_mode + + short addr_ind_a0 - tbl_ea_mode + short addr_ind_a1 - tbl_ea_mode + short addr_ind_a2 - tbl_ea_mode + short addr_ind_a3 - tbl_ea_mode + short addr_ind_a4 - tbl_ea_mode + short addr_ind_a5 - tbl_ea_mode + short addr_ind_a6 - tbl_ea_mode + short addr_ind_a7 - tbl_ea_mode + + short addr_ind_p_a0 - tbl_ea_mode + short addr_ind_p_a1 - tbl_ea_mode + short addr_ind_p_a2 - tbl_ea_mode + short addr_ind_p_a3 - tbl_ea_mode + short addr_ind_p_a4 - tbl_ea_mode + short addr_ind_p_a5 - tbl_ea_mode + short addr_ind_p_a6 - tbl_ea_mode + short addr_ind_p_a7 - tbl_ea_mode + + short addr_ind_m_a0 - tbl_ea_mode + short addr_ind_m_a1 - tbl_ea_mode + short addr_ind_m_a2 - tbl_ea_mode + short addr_ind_m_a3 - tbl_ea_mode + short addr_ind_m_a4 - tbl_ea_mode + short addr_ind_m_a5 - tbl_ea_mode + short addr_ind_m_a6 - tbl_ea_mode + short addr_ind_m_a7 - tbl_ea_mode + + short addr_ind_disp_a0 - tbl_ea_mode + short addr_ind_disp_a1 - tbl_ea_mode + short addr_ind_disp_a2 - tbl_ea_mode + short addr_ind_disp_a3 - tbl_ea_mode + short addr_ind_disp_a4 - tbl_ea_mode + short addr_ind_disp_a5 - tbl_ea_mode + short addr_ind_disp_a6 - tbl_ea_mode + short addr_ind_disp_a7 - tbl_ea_mode + + short _addr_ind_ext - tbl_ea_mode + short _addr_ind_ext - tbl_ea_mode + short _addr_ind_ext - tbl_ea_mode + short _addr_ind_ext - tbl_ea_mode + short _addr_ind_ext - tbl_ea_mode + short _addr_ind_ext - tbl_ea_mode + short _addr_ind_ext - tbl_ea_mode + short _addr_ind_ext - tbl_ea_mode + + short abs_short - tbl_ea_mode + short abs_long - tbl_ea_mode + short pc_ind - tbl_ea_mode + short pc_ind_ext - tbl_ea_mode + short immediate - tbl_ea_mode + short tbl_ea_mode - tbl_ea_mode + short tbl_ea_mode - tbl_ea_mode + short tbl_ea_mode - tbl_ea_mode + +################################### +# Address register indirect: (An) # +################################### +addr_ind_a0: + mov.l EXC_A0(%a6),%a0 # Get current a0 + rts + +addr_ind_a1: + mov.l EXC_A1(%a6),%a0 # Get current a1 + rts + +addr_ind_a2: + mov.l EXC_A2(%a6),%a0 # Get current a2 + rts + +addr_ind_a3: + mov.l EXC_A3(%a6),%a0 # Get current a3 + rts + +addr_ind_a4: + mov.l EXC_A4(%a6),%a0 # Get current a4 + rts + +addr_ind_a5: + mov.l EXC_A5(%a6),%a0 # Get current a5 + rts + +addr_ind_a6: + mov.l EXC_A6(%a6),%a0 # Get current a6 + rts + +addr_ind_a7: + mov.l EXC_A7(%a6),%a0 # Get current a7 + rts + +##################################################### +# Address register indirect w/ postincrement: (An)+ # +##################################################### +addr_ind_p_a0: + mov.l %a0,%d0 # copy no. bytes + mov.l EXC_A0(%a6),%a0 # load current value + add.l %a0,%d0 # increment + mov.l %d0,EXC_A0(%a6) # save incremented value + + mov.l %a0,EXC_SAVVAL(%a6) # save in case of access error + mov.b &0x0,EXC_SAVREG(%a6) # save regno, too + mov.b &restore_flg,SPCOND_FLG(%a6) # set flag + rts + +addr_ind_p_a1: + mov.l %a0,%d0 # copy no. bytes + mov.l EXC_A1(%a6),%a0 # load current value + add.l %a0,%d0 # increment + mov.l %d0,EXC_A1(%a6) # save incremented value + + mov.l %a0,EXC_SAVVAL(%a6) # save in case of access error + mov.b &0x1,EXC_SAVREG(%a6) # save regno, too + mov.b &restore_flg,SPCOND_FLG(%a6) # set flag + rts + +addr_ind_p_a2: + mov.l %a0,%d0 # copy no. bytes + mov.l EXC_A2(%a6),%a0 # load current value + add.l %a0,%d0 # increment + mov.l %d0,EXC_A2(%a6) # save incremented value + + mov.l %a0,EXC_SAVVAL(%a6) # save in case of access error + mov.b &0x2,EXC_SAVREG(%a6) # save regno, too + mov.b &restore_flg,SPCOND_FLG(%a6) # set flag + rts + +addr_ind_p_a3: + mov.l %a0,%d0 # copy no. bytes + mov.l EXC_A3(%a6),%a0 # load current value + add.l %a0,%d0 # increment + mov.l %d0,EXC_A3(%a6) # save incremented value + + mov.l %a0,EXC_SAVVAL(%a6) # save in case of access error + mov.b &0x3,EXC_SAVREG(%a6) # save regno, too + mov.b &restore_flg,SPCOND_FLG(%a6) # set flag + rts + +addr_ind_p_a4: + mov.l %a0,%d0 # copy no. bytes + mov.l EXC_A4(%a6),%a0 # load current value + add.l %a0,%d0 # increment + mov.l %d0,EXC_A4(%a6) # save incremented value + + mov.l %a0,EXC_SAVVAL(%a6) # save in case of access error + mov.b &0x4,EXC_SAVREG(%a6) # save regno, too + mov.b &restore_flg,SPCOND_FLG(%a6) # set flag + rts + +addr_ind_p_a5: + mov.l %a0,%d0 # copy no. bytes + mov.l EXC_A5(%a6),%a0 # load current value + add.l %a0,%d0 # increment + mov.l %d0,EXC_A5(%a6) # save incremented value + + mov.l %a0,EXC_SAVVAL(%a6) # save in case of access error + mov.b &0x5,EXC_SAVREG(%a6) # save regno, too + mov.b &restore_flg,SPCOND_FLG(%a6) # set flag + rts + +addr_ind_p_a6: + mov.l %a0,%d0 # copy no. bytes + mov.l EXC_A6(%a6),%a0 # load current value + add.l %a0,%d0 # increment + mov.l %d0,EXC_A6(%a6) # save incremented value + + mov.l %a0,EXC_SAVVAL(%a6) # save in case of access error + mov.b &0x6,EXC_SAVREG(%a6) # save regno, too + mov.b &restore_flg,SPCOND_FLG(%a6) # set flag + rts + +addr_ind_p_a7: + mov.b &mia7_flg,SPCOND_FLG(%a6) # set "special case" flag + + mov.l %a0,%d0 # copy no. bytes + mov.l EXC_A7(%a6),%a0 # load current value + add.l %a0,%d0 # increment + mov.l %d0,EXC_A7(%a6) # save incremented value + rts + +#################################################### +# Address register indirect w/ predecrement: -(An) # +#################################################### +addr_ind_m_a0: + mov.l EXC_A0(%a6),%d0 # Get current a0 + mov.l %d0,EXC_SAVVAL(%a6) # save in case of access error + sub.l %a0,%d0 # Decrement + mov.l %d0,EXC_A0(%a6) # Save decr value + mov.l %d0,%a0 + + mov.b &0x0,EXC_SAVREG(%a6) # save regno, too + mov.b &restore_flg,SPCOND_FLG(%a6) # set flag + rts + +addr_ind_m_a1: + mov.l EXC_A1(%a6),%d0 # Get current a1 + mov.l %d0,EXC_SAVVAL(%a6) # save in case of access error + sub.l %a0,%d0 # Decrement + mov.l %d0,EXC_A1(%a6) # Save decr value + mov.l %d0,%a0 + + mov.b &0x1,EXC_SAVREG(%a6) # save regno, too + mov.b &restore_flg,SPCOND_FLG(%a6) # set flag + rts + +addr_ind_m_a2: + mov.l EXC_A2(%a6),%d0 # Get current a2 + mov.l %d0,EXC_SAVVAL(%a6) # save in case of access error + sub.l %a0,%d0 # Decrement + mov.l %d0,EXC_A2(%a6) # Save decr value + mov.l %d0,%a0 + + mov.b &0x2,EXC_SAVREG(%a6) # save regno, too + mov.b &restore_flg,SPCOND_FLG(%a6) # set flag + rts + +addr_ind_m_a3: + mov.l EXC_A3(%a6),%d0 # Get current a3 + mov.l %d0,EXC_SAVVAL(%a6) # save in case of access error + sub.l %a0,%d0 # Decrement + mov.l %d0,EXC_A3(%a6) # Save decr value + mov.l %d0,%a0 + + mov.b &0x3,EXC_SAVREG(%a6) # save regno, too + mov.b &restore_flg,SPCOND_FLG(%a6) # set flag + rts + +addr_ind_m_a4: + mov.l EXC_A4(%a6),%d0 # Get current a4 + mov.l %d0,EXC_SAVVAL(%a6) # save in case of access error + sub.l %a0,%d0 # Decrement + mov.l %d0,EXC_A4(%a6) # Save decr value + mov.l %d0,%a0 + + mov.b &0x4,EXC_SAVREG(%a6) # save regno, too + mov.b &restore_flg,SPCOND_FLG(%a6) # set flag + rts + +addr_ind_m_a5: + mov.l EXC_A5(%a6),%d0 # Get current a5 + mov.l %d0,EXC_SAVVAL(%a6) # save in case of access error + sub.l %a0,%d0 # Decrement + mov.l %d0,EXC_A5(%a6) # Save decr value + mov.l %d0,%a0 + + mov.b &0x5,EXC_SAVREG(%a6) # save regno, too + mov.b &restore_flg,SPCOND_FLG(%a6) # set flag + rts + +addr_ind_m_a6: + mov.l EXC_A6(%a6),%d0 # Get current a6 + mov.l %d0,EXC_SAVVAL(%a6) # save in case of access error + sub.l %a0,%d0 # Decrement + mov.l %d0,EXC_A6(%a6) # Save decr value + mov.l %d0,%a0 + + mov.b &0x6,EXC_SAVREG(%a6) # save regno, too + mov.b &restore_flg,SPCOND_FLG(%a6) # set flag + rts + +addr_ind_m_a7: + mov.b &mda7_flg,SPCOND_FLG(%a6) # set "special case" flag + + mov.l EXC_A7(%a6),%d0 # Get current a7 + sub.l %a0,%d0 # Decrement + mov.l %d0,EXC_A7(%a6) # Save decr value + mov.l %d0,%a0 + rts + +######################################################## +# Address register indirect w/ displacement: (d16, An) # +######################################################## +addr_ind_disp_a0: + mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr + addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr + bsr.l _imem_read_word + + tst.l %d1 # ifetch error? + bne.l isp_iacc # yes + + mov.w %d0,%a0 # sign extend displacement + add.l EXC_A0(%a6),%a0 # a0 + d16 + rts + +addr_ind_disp_a1: + mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr + addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr + bsr.l _imem_read_word + + tst.l %d1 # ifetch error? + bne.l isp_iacc # yes + + mov.w %d0,%a0 # sign extend displacement + add.l EXC_A1(%a6),%a0 # a1 + d16 + rts + +addr_ind_disp_a2: + mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr + addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr + bsr.l _imem_read_word + + tst.l %d1 # ifetch error? + bne.l isp_iacc # yes + + mov.w %d0,%a0 # sign extend displacement + add.l EXC_A2(%a6),%a0 # a2 + d16 + rts + +addr_ind_disp_a3: + mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr + addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr + bsr.l _imem_read_word + + tst.l %d1 # ifetch error? + bne.l isp_iacc # yes + + mov.w %d0,%a0 # sign extend displacement + add.l EXC_A3(%a6),%a0 # a3 + d16 + rts + +addr_ind_disp_a4: + mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr + addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr + bsr.l _imem_read_word + + tst.l %d1 # ifetch error? + bne.l isp_iacc # yes + + mov.w %d0,%a0 # sign extend displacement + add.l EXC_A4(%a6),%a0 # a4 + d16 + rts + +addr_ind_disp_a5: + mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr + addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr + bsr.l _imem_read_word + + tst.l %d1 # ifetch error? + bne.l isp_iacc # yes + + mov.w %d0,%a0 # sign extend displacement + add.l EXC_A5(%a6),%a0 # a5 + d16 + rts + +addr_ind_disp_a6: + mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr + addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr + bsr.l _imem_read_word + + tst.l %d1 # ifetch error? + bne.l isp_iacc # yes + + mov.w %d0,%a0 # sign extend displacement + add.l EXC_A6(%a6),%a0 # a6 + d16 + rts + +addr_ind_disp_a7: + mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr + addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr + bsr.l _imem_read_word + + tst.l %d1 # ifetch error? + bne.l isp_iacc # yes + + mov.w %d0,%a0 # sign extend displacement + add.l EXC_A7(%a6),%a0 # a7 + d16 + rts + +######################################################################## +# Address register indirect w/ index(8-bit displacement): (dn, An, Xn) # +# " " " w/ " (base displacement): (bd, An, Xn) # +# Memory indirect postindexed: ([bd, An], Xn, od) # +# Memory indirect preindexed: ([bd, An, Xn], od) # +######################################################################## +_addr_ind_ext: + mov.l %d1,-(%sp) + + mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr + addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr + bsr.l _imem_read_word # fetch extword in d0 + + tst.l %d1 # ifetch error? + bne.l isp_iacc # yes + + mov.l (%sp)+,%d1 + + mov.l (EXC_AREGS,%a6,%d1.w*4),%a0 # put base in a0 + + btst &0x8,%d0 + beq.b addr_ind_index_8bit # for ext word or not? + + movm.l &0x3c00,-(%sp) # save d2-d5 + + mov.l %d0,%d5 # put extword in d5 + mov.l %a0,%d3 # put base in d3 + + bra.l calc_mem_ind # calc memory indirect + +addr_ind_index_8bit: + mov.l %d2,-(%sp) # save old d2 + + mov.l %d0,%d1 + rol.w &0x4,%d1 + andi.w &0xf,%d1 # extract index regno + + mov.l (EXC_DREGS,%a6,%d1.w*4),%d1 # fetch index reg value + + btst &0xb,%d0 # is it word or long? + bne.b aii8_long + ext.l %d1 # sign extend word index +aii8_long: + mov.l %d0,%d2 + rol.w &0x7,%d2 + andi.l &0x3,%d2 # extract scale value + + lsl.l %d2,%d1 # shift index by scale + + extb.l %d0 # sign extend displacement + add.l %d1,%d0 # index + disp + add.l %d0,%a0 # An + (index + disp) + + mov.l (%sp)+,%d2 # restore old d2 + rts + +###################### +# Immediate: #<data> # +######################################################################### +# word, long: <ea> of the data is the current extension word # +# pointer value. new extension word pointer is simply the old # +# plus the number of bytes in the data type(2 or 4). # +######################################################################### +immediate: + mov.b &immed_flg,SPCOND_FLG(%a6) # set immediate flag + + mov.l EXC_EXTWPTR(%a6),%a0 # fetch extension word ptr + rts + +########################### +# Absolute short: (XXX).W # +########################### +abs_short: + mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr + addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr + bsr.l _imem_read_word # fetch short address + + tst.l %d1 # ifetch error? + bne.l isp_iacc # yes + + mov.w %d0,%a0 # return <ea> in a0 + rts + +########################## +# Absolute long: (XXX).L # +########################## +abs_long: + mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr + addq.l &0x4,EXC_EXTWPTR(%a6) # incr instruction ptr + bsr.l _imem_read_long # fetch long address + + tst.l %d1 # ifetch error? + bne.l isp_iacc # yes + + mov.l %d0,%a0 # return <ea> in a0 + rts + +####################################################### +# Program counter indirect w/ displacement: (d16, PC) # +####################################################### +pc_ind: + mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr + addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr + bsr.l _imem_read_word # fetch word displacement + + tst.l %d1 # ifetch error? + bne.l isp_iacc # yes + + mov.w %d0,%a0 # sign extend displacement + + add.l EXC_EXTWPTR(%a6),%a0 # pc + d16 + +# _imem_read_word() increased the extwptr by 2. need to adjust here. + subq.l &0x2,%a0 # adjust <ea> + + rts + +########################################################## +# PC indirect w/ index(8-bit displacement): (d8, PC, An) # +# " " w/ " (base displacement): (bd, PC, An) # +# PC memory indirect postindexed: ([bd, PC], Xn, od) # +# PC memory indirect preindexed: ([bd, PC, Xn], od) # +########################################################## +pc_ind_ext: + mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr + addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr + bsr.l _imem_read_word # fetch ext word + + tst.l %d1 # ifetch error? + bne.l isp_iacc # yes + + mov.l EXC_EXTWPTR(%a6),%a0 # put base in a0 + subq.l &0x2,%a0 # adjust base + + btst &0x8,%d0 # is disp only 8 bits? + beq.b pc_ind_index_8bit # yes + +# the indexed addressing mode uses a base displacement of size +# word or long + movm.l &0x3c00,-(%sp) # save d2-d5 + + mov.l %d0,%d5 # put extword in d5 + mov.l %a0,%d3 # put base in d3 + + bra.l calc_mem_ind # calc memory indirect + +pc_ind_index_8bit: + mov.l %d2,-(%sp) # create a temp register + + mov.l %d0,%d1 # make extword copy + rol.w &0x4,%d1 # rotate reg num into place + andi.w &0xf,%d1 # extract register number + + mov.l (EXC_DREGS,%a6,%d1.w*4),%d1 # fetch index reg value + + btst &0xb,%d0 # is index word or long? + bne.b pii8_long # long + ext.l %d1 # sign extend word index +pii8_long: + mov.l %d0,%d2 # make extword copy + rol.w &0x7,%d2 # rotate scale value into place + andi.l &0x3,%d2 # extract scale value + + lsl.l %d2,%d1 # shift index by scale + + extb.l %d0 # sign extend displacement + add.l %d1,%d0 # index + disp + add.l %d0,%a0 # An + (index + disp) + + mov.l (%sp)+,%d2 # restore temp register + + rts + +# a5 = exc_extwptr (global to uaeh) +# a4 = exc_opword (global to uaeh) +# a3 = exc_dregs (global to uaeh) + +# d2 = index (internal " " ) +# d3 = base (internal " " ) +# d4 = od (internal " " ) +# d5 = extword (internal " " ) +calc_mem_ind: + btst &0x6,%d5 # is the index suppressed? + beq.b calc_index + clr.l %d2 # yes, so index = 0 + bra.b base_supp_ck +calc_index: + bfextu %d5{&16:&4},%d2 + mov.l (EXC_DREGS,%a6,%d2.w*4),%d2 + btst &0xb,%d5 # is index word or long? + bne.b no_ext + ext.l %d2 +no_ext: + bfextu %d5{&21:&2},%d0 + lsl.l %d0,%d2 +base_supp_ck: + btst &0x7,%d5 # is the bd suppressed? + beq.b no_base_sup + clr.l %d3 +no_base_sup: + bfextu %d5{&26:&2},%d0 # get bd size +# beq.l _error # if (size == 0) it's reserved + cmpi.b %d0,&2 + blt.b no_bd + beq.b get_word_bd + + mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr + addq.l &0x4,EXC_EXTWPTR(%a6) # incr instruction ptr + bsr.l _imem_read_long + + tst.l %d1 # ifetch error? + bne.l isp_iacc # yes + + bra.b chk_ind +get_word_bd: + mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr + addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr + bsr.l _imem_read_word + + tst.l %d1 # ifetch error? + bne.l isp_iacc # yes + + ext.l %d0 # sign extend bd + +chk_ind: + add.l %d0,%d3 # base += bd +no_bd: + bfextu %d5{&30:&2},%d0 # is od suppressed? + beq.w aii_bd + cmpi.b %d0,&0x2 + blt.b null_od + beq.b word_od + + mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr + addq.l &0x4,EXC_EXTWPTR(%a6) # incr instruction ptr + bsr.l _imem_read_long + + tst.l %d1 # ifetch error? + bne.l isp_iacc # yes + + bra.b add_them + +word_od: + mov.l EXC_EXTWPTR(%a6),%a0 # fetch instruction addr + addq.l &0x2,EXC_EXTWPTR(%a6) # incr instruction ptr + bsr.l _imem_read_word + + tst.l %d1 # ifetch error? + bne.l isp_iacc # yes + + ext.l %d0 # sign extend od + bra.b add_them + +null_od: + clr.l %d0 +add_them: + mov.l %d0,%d4 + btst &0x2,%d5 # pre or post indexing? + beq.b pre_indexed + + mov.l %d3,%a0 + bsr.l _dmem_read_long + + tst.l %d1 # dfetch error? + bne.b calc_ea_err # yes + + add.l %d2,%d0 # <ea> += index + add.l %d4,%d0 # <ea> += od + bra.b done_ea + +pre_indexed: + add.l %d2,%d3 # preindexing + mov.l %d3,%a0 + bsr.l _dmem_read_long + + tst.l %d1 # ifetch error? + bne.b calc_ea_err # yes + + add.l %d4,%d0 # ea += od + bra.b done_ea + +aii_bd: + add.l %d2,%d3 # ea = (base + bd) + index + mov.l %d3,%d0 +done_ea: + mov.l %d0,%a0 + + movm.l (%sp)+,&0x003c # restore d2-d5 + rts + +# if dmem_read_long() returns a fail message in d1, the package +# must create an access error frame. here, we pass a skeleton fslw +# and the failing address to the routine that creates the new frame. +# FSLW: +# read = true +# size = longword +# TM = data +# software emulation error = true +calc_ea_err: + mov.l %d3,%a0 # pass failing address + mov.l &0x01010001,%d0 # pass fslw + bra.l isp_dacc + +######################################################################### +# XDEF **************************************************************** # +# _moveperipheral(): routine to emulate movep instruction # +# # +# XREF **************************************************************** # +# _dmem_read_byte() - read byte from memory # +# _dmem_write_byte() - write byte to memory # +# isp_dacc() - handle data access error exception # +# # +# INPUT *************************************************************** # +# none # +# # +# OUTPUT ************************************************************** # +# If exiting through isp_dacc... # +# a0 = failing address # +# d0 = FSLW # +# else # +# none # +# # +# ALGORITHM *********************************************************** # +# Decode the movep instruction words stored at EXC_OPWORD and # +# either read or write the required bytes from/to memory. Use the # +# _dmem_{read,write}_byte() routines. If one of the memory routines # +# returns a failing value, we must pass the failing address and a FSLW # +# to the _isp_dacc() routine. # +# Since this instruction is used to access peripherals, make sure # +# to only access the required bytes. # +# # +######################################################################### + +########################### +# movep.(w,l) Dx,(d,Ay) # +# movep.(w,l) (d,Ay),Dx # +########################### + global _moveperipheral +_moveperipheral: + mov.w EXC_OPWORD(%a6),%d1 # fetch the opcode word + + mov.b %d1,%d0 + and.w &0x7,%d0 # extract Ay from opcode word + + mov.l (EXC_AREGS,%a6,%d0.w*4),%a0 # fetch ay + + add.w EXC_EXTWORD(%a6),%a0 # add: an + sgn_ext(disp) + + btst &0x7,%d1 # (reg 2 mem) or (mem 2 reg) + beq.w mem2reg + +# reg2mem: fetch dx, then write it to memory +reg2mem: + mov.w %d1,%d0 + rol.w &0x7,%d0 + and.w &0x7,%d0 # extract Dx from opcode word + + mov.l (EXC_DREGS,%a6,%d0.w*4), %d0 # fetch dx + + btst &0x6,%d1 # word or long operation? + beq.b r2mwtrans + +# a0 = dst addr +# d0 = Dx +r2mltrans: + mov.l %d0,%d2 # store data + mov.l %a0,%a2 # store addr + rol.l &0x8,%d2 + mov.l %d2,%d0 + + bsr.l _dmem_write_byte # os : write hi + + tst.l %d1 # dfetch error? + bne.w movp_write_err # yes + + add.w &0x2,%a2 # incr addr + mov.l %a2,%a0 + rol.l &0x8,%d2 + mov.l %d2,%d0 + + bsr.l _dmem_write_byte # os : write lo + + tst.l %d1 # dfetch error? + bne.w movp_write_err # yes + + add.w &0x2,%a2 # incr addr + mov.l %a2,%a0 + rol.l &0x8,%d2 + mov.l %d2,%d0 + + bsr.l _dmem_write_byte # os : write lo + + tst.l %d1 # dfetch error? + bne.w movp_write_err # yes + + add.w &0x2,%a2 # incr addr + mov.l %a2,%a0 + rol.l &0x8,%d2 + mov.l %d2,%d0 + + bsr.l _dmem_write_byte # os : write lo + + tst.l %d1 # dfetch error? + bne.w movp_write_err # yes + + rts + +# a0 = dst addr +# d0 = Dx +r2mwtrans: + mov.l %d0,%d2 # store data + mov.l %a0,%a2 # store addr + lsr.w &0x8,%d0 + + bsr.l _dmem_write_byte # os : write hi + + tst.l %d1 # dfetch error? + bne.w movp_write_err # yes + + add.w &0x2,%a2 + mov.l %a2,%a0 + mov.l %d2,%d0 + + bsr.l _dmem_write_byte # os : write lo + + tst.l %d1 # dfetch error? + bne.w movp_write_err # yes + + rts + +# mem2reg: read bytes from memory. +# determines the dest register, and then writes the bytes into it. +mem2reg: + btst &0x6,%d1 # word or long operation? + beq.b m2rwtrans + +# a0 = dst addr +m2rltrans: + mov.l %a0,%a2 # store addr + + bsr.l _dmem_read_byte # read first byte + + tst.l %d1 # dfetch error? + bne.w movp_read_err # yes + + mov.l %d0,%d2 + + add.w &0x2,%a2 # incr addr by 2 bytes + mov.l %a2,%a0 + + bsr.l _dmem_read_byte # read second byte + + tst.l %d1 # dfetch error? + bne.w movp_read_err # yes + + lsl.w &0x8,%d2 + mov.b %d0,%d2 # append bytes + + add.w &0x2,%a2 # incr addr by 2 bytes + mov.l %a2,%a0 + + bsr.l _dmem_read_byte # read second byte + + tst.l %d1 # dfetch error? + bne.w movp_read_err # yes + + lsl.l &0x8,%d2 + mov.b %d0,%d2 # append bytes + + add.w &0x2,%a2 # incr addr by 2 bytes + mov.l %a2,%a0 + + bsr.l _dmem_read_byte # read second byte + + tst.l %d1 # dfetch error? + bne.w movp_read_err # yes + + lsl.l &0x8,%d2 + mov.b %d0,%d2 # append bytes + + mov.b EXC_OPWORD(%a6),%d1 + lsr.b &0x1,%d1 + and.w &0x7,%d1 # extract Dx from opcode word + + mov.l %d2,(EXC_DREGS,%a6,%d1.w*4) # store dx + + rts + +# a0 = dst addr +m2rwtrans: + mov.l %a0,%a2 # store addr + + bsr.l _dmem_read_byte # read first byte + + tst.l %d1 # dfetch error? + bne.w movp_read_err # yes + + mov.l %d0,%d2 + + add.w &0x2,%a2 # incr addr by 2 bytes + mov.l %a2,%a0 + + bsr.l _dmem_read_byte # read second byte + + tst.l %d1 # dfetch error? + bne.w movp_read_err # yes + + lsl.w &0x8,%d2 + mov.b %d0,%d2 # append bytes + + mov.b EXC_OPWORD(%a6),%d1 + lsr.b &0x1,%d1 + and.w &0x7,%d1 # extract Dx from opcode word + + mov.w %d2,(EXC_DREGS+2,%a6,%d1.w*4) # store dx + + rts + +# if dmem_{read,write}_byte() returns a fail message in d1, the package +# must create an access error frame. here, we pass a skeleton fslw +# and the failing address to the routine that creates the new frame. +# FSLW: +# write = true +# size = byte +# TM = data +# software emulation error = true +movp_write_err: + mov.l %a2,%a0 # pass failing address + mov.l &0x00a10001,%d0 # pass fslw + bra.l isp_dacc + +# FSLW: +# read = true +# size = byte +# TM = data +# software emulation error = true +movp_read_err: + mov.l %a2,%a0 # pass failing address + mov.l &0x01210001,%d0 # pass fslw + bra.l isp_dacc + +######################################################################### +# XDEF **************************************************************** # +# _chk2_cmp2(): routine to emulate chk2/cmp2 instructions # +# # +# XREF **************************************************************** # +# _calc_ea(): calculate effective address # +# _dmem_read_long(): read operands # +# _dmem_read_word(): read operands # +# isp_dacc(): handle data access error exception # +# # +# INPUT *************************************************************** # +# none # +# # +# OUTPUT ************************************************************** # +# If exiting through isp_dacc... # +# a0 = failing address # +# d0 = FSLW # +# else # +# none # +# # +# ALGORITHM *********************************************************** # +# First, calculate the effective address, then fetch the byte, # +# word, or longword sized operands. Then, in the interest of # +# simplicity, all operands are converted to longword size whether the # +# operation is byte, word, or long. The bounds are sign extended # +# accordingly. If Rn is a data register, Rn is also sign extended. If # +# Rn is an address register, it need not be sign extended since the # +# full register is always used. # +# The comparisons are made and the condition codes calculated. # +# If the instruction is chk2 and the Rn value is out-of-bounds, set # +# the ichk_flg in SPCOND_FLG. # +# If the memory fetch returns a failing value, pass the failing # +# address and FSLW to the isp_dacc() routine. # +# # +######################################################################### + + global _chk2_cmp2 +_chk2_cmp2: + +# passing size parameter doesn't matter since chk2 & cmp2 can't do +# either predecrement, postincrement, or immediate. + bsr.l _calc_ea # calculate <ea> + + mov.b EXC_EXTWORD(%a6), %d0 # fetch hi extension word + rol.b &0x4, %d0 # rotate reg bits into lo + and.w &0xf, %d0 # extract reg bits + + mov.l (EXC_DREGS,%a6,%d0.w*4), %d2 # get regval + + cmpi.b EXC_OPWORD(%a6), &0x2 # what size is operation? + blt.b chk2_cmp2_byte # size == byte + beq.b chk2_cmp2_word # size == word + +# the bounds are longword size. call routine to read the lower +# bound into d0 and the higher bound into d1. +chk2_cmp2_long: + mov.l %a0,%a2 # save copy of <ea> + bsr.l _dmem_read_long # fetch long lower bound + + tst.l %d1 # dfetch error? + bne.w chk2_cmp2_err_l # yes + + mov.l %d0,%d3 # save long lower bound + addq.l &0x4,%a2 + mov.l %a2,%a0 # pass <ea> of long upper bound + bsr.l _dmem_read_long # fetch long upper bound + + tst.l %d1 # dfetch error? + bne.w chk2_cmp2_err_l # yes + + mov.l %d0,%d1 # long upper bound in d1 + mov.l %d3,%d0 # long lower bound in d0 + bra.w chk2_cmp2_compare # go do the compare emulation + +# the bounds are word size. fetch them in one subroutine call by +# reading a longword. sign extend both. if it's a data operation, +# sign extend Rn to long, also. +chk2_cmp2_word: + mov.l %a0,%a2 + bsr.l _dmem_read_long # fetch 2 word bounds + + tst.l %d1 # dfetch error? + bne.w chk2_cmp2_err_l # yes + + mov.w %d0, %d1 # place hi in %d1 + swap %d0 # place lo in %d0 + + ext.l %d0 # sign extend lo bnd + ext.l %d1 # sign extend hi bnd + + btst &0x7, EXC_EXTWORD(%a6) # address compare? + bne.w chk2_cmp2_compare # yes; don't sign extend + +# operation is a data register compare. +# sign extend word to long so we can do simple longword compares. + ext.l %d2 # sign extend data word + bra.w chk2_cmp2_compare # go emulate compare + +# the bounds are byte size. fetch them in one subroutine call by +# reading a word. sign extend both. if it's a data operation, +# sign extend Rn to long, also. +chk2_cmp2_byte: + mov.l %a0,%a2 + bsr.l _dmem_read_word # fetch 2 byte bounds + + tst.l %d1 # dfetch error? + bne.w chk2_cmp2_err_w # yes + + mov.b %d0, %d1 # place hi in %d1 + lsr.w &0x8, %d0 # place lo in %d0 + + extb.l %d0 # sign extend lo bnd + extb.l %d1 # sign extend hi bnd + + btst &0x7, EXC_EXTWORD(%a6) # address compare? + bne.b chk2_cmp2_compare # yes; don't sign extend + +# operation is a data register compare. +# sign extend byte to long so we can do simple longword compares. + extb.l %d2 # sign extend data byte + +# +# To set the ccodes correctly: +# (1) save 'Z' bit from (Rn - lo) +# (2) save 'Z' and 'N' bits from ((hi - lo) - (Rn - hi)) +# (3) keep 'X', 'N', and 'V' from before instruction +# (4) combine ccodes +# +chk2_cmp2_compare: + sub.l %d0, %d2 # (Rn - lo) + mov.w %cc, %d3 # fetch resulting ccodes + andi.b &0x4, %d3 # keep 'Z' bit + sub.l %d0, %d1 # (hi - lo) + cmp.l %d1,%d2 # ((hi - lo) - (Rn - hi)) + + mov.w %cc, %d4 # fetch resulting ccodes + or.b %d4, %d3 # combine w/ earlier ccodes + andi.b &0x5, %d3 # keep 'Z' and 'N' + + mov.w EXC_CC(%a6), %d4 # fetch old ccodes + andi.b &0x1a, %d4 # keep 'X','N','V' bits + or.b %d3, %d4 # insert new ccodes + mov.w %d4, EXC_CC(%a6) # save new ccodes + + btst &0x3, EXC_EXTWORD(%a6) # separate chk2,cmp2 + bne.b chk2_finish # it's a chk2 + + rts + +# this code handles the only difference between chk2 and cmp2. chk2 would +# have trapped out if the value was out of bounds. we check this by seeing +# if the 'N' bit was set by the operation. +chk2_finish: + btst &0x0, %d4 # is 'N' bit set? + bne.b chk2_trap # yes;chk2 should trap + rts +chk2_trap: + mov.b &ichk_flg,SPCOND_FLG(%a6) # set "special case" flag + rts + +# if dmem_read_{long,word}() returns a fail message in d1, the package +# must create an access error frame. here, we pass a skeleton fslw +# and the failing address to the routine that creates the new frame. +# FSLW: +# read = true +# size = longword +# TM = data +# software emulation error = true +chk2_cmp2_err_l: + mov.l %a2,%a0 # pass failing address + mov.l &0x01010001,%d0 # pass fslw + bra.l isp_dacc + +# FSLW: +# read = true +# size = word +# TM = data +# software emulation error = true +chk2_cmp2_err_w: + mov.l %a2,%a0 # pass failing address + mov.l &0x01410001,%d0 # pass fslw + bra.l isp_dacc + +######################################################################### +# XDEF **************************************************************** # +# _div64(): routine to emulate div{u,s}.l <ea>,Dr:Dq # +# 64/32->32r:32q # +# # +# XREF **************************************************************** # +# _calc_ea() - calculate effective address # +# isp_iacc() - handle instruction access error exception # +# isp_dacc() - handle data access error exception # +# isp_restore() - restore An on access error w/ -() or ()+ # +# # +# INPUT *************************************************************** # +# none # +# # +# OUTPUT ************************************************************** # +# If exiting through isp_dacc... # +# a0 = failing address # +# d0 = FSLW # +# else # +# none # +# # +# ALGORITHM *********************************************************** # +# First, decode the operand location. If it's in Dn, fetch from # +# the stack. If it's in memory, use _calc_ea() to calculate the # +# effective address. Use _dmem_read_long() to fetch at that address. # +# Unless the operand is immediate data. Then use _imem_read_long(). # +# Send failures to isp_dacc() or isp_iacc() as appropriate. # +# If the operands are signed, make them unsigned and save the # +# sign info for later. Separate out special cases like divide-by-zero # +# or 32-bit divides if possible. Else, use a special math algorithm # +# to calculate the result. # +# Restore sign info if signed instruction. Set the condition # +# codes. Set idbyz_flg in SPCOND_FLG if divisor was zero. Store the # +# quotient and remainder in the appropriate data registers on the stack.# +# # +######################################################################### + +set NDIVISOR, EXC_TEMP+0x0 +set NDIVIDEND, EXC_TEMP+0x1 +set NDRSAVE, EXC_TEMP+0x2 +set NDQSAVE, EXC_TEMP+0x4 +set DDSECOND, EXC_TEMP+0x6 +set DDQUOTIENT, EXC_TEMP+0x8 +set DDNORMAL, EXC_TEMP+0xc + + global _div64 +############# +# div(u,s)l # +############# +_div64: + mov.b EXC_OPWORD+1(%a6), %d0 + andi.b &0x38, %d0 # extract src mode + + bne.w dcontrolmodel_s # %dn dest or control mode? + + mov.b EXC_OPWORD+1(%a6), %d0 # extract Dn from opcode + andi.w &0x7, %d0 + mov.l (EXC_DREGS,%a6,%d0.w*4), %d7 # fetch divisor from register + +dgotsrcl: + beq.w div64eq0 # divisor is = 0!!! + + mov.b EXC_EXTWORD+1(%a6), %d0 # extract Dr from extword + mov.b EXC_EXTWORD(%a6), %d1 # extract Dq from extword + and.w &0x7, %d0 + lsr.b &0x4, %d1 + and.w &0x7, %d1 + mov.w %d0, NDRSAVE(%a6) # save Dr for later + mov.w %d1, NDQSAVE(%a6) # save Dq for later + +# fetch %dr and %dq directly off stack since all regs are saved there + mov.l (EXC_DREGS,%a6,%d0.w*4), %d5 # get dividend hi + mov.l (EXC_DREGS,%a6,%d1.w*4), %d6 # get dividend lo + +# separate signed and unsigned divide + btst &0x3, EXC_EXTWORD(%a6) # signed or unsigned? + beq.b dspecialcases # use positive divide + +# save the sign of the divisor +# make divisor unsigned if it's negative + tst.l %d7 # chk sign of divisor + slt NDIVISOR(%a6) # save sign of divisor + bpl.b dsgndividend + neg.l %d7 # complement negative divisor + +# save the sign of the dividend +# make dividend unsigned if it's negative +dsgndividend: + tst.l %d5 # chk sign of hi(dividend) + slt NDIVIDEND(%a6) # save sign of dividend + bpl.b dspecialcases + + mov.w &0x0, %cc # clear 'X' cc bit + negx.l %d6 # complement signed dividend + negx.l %d5 + +# extract some special cases: +# - is (dividend == 0) ? +# - is (hi(dividend) == 0 && (divisor <= lo(dividend))) ? (32-bit div) +dspecialcases: + tst.l %d5 # is (hi(dividend) == 0) + bne.b dnormaldivide # no, so try it the long way + + tst.l %d6 # is (lo(dividend) == 0), too + beq.w ddone # yes, so (dividend == 0) + + cmp.l %d7,%d6 # is (divisor <= lo(dividend)) + bls.b d32bitdivide # yes, so use 32 bit divide + + exg %d5,%d6 # q = 0, r = dividend + bra.w divfinish # can't divide, we're done. + +d32bitdivide: + tdivu.l %d7, %d5:%d6 # it's only a 32/32 bit div! + + bra.b divfinish + +dnormaldivide: +# last special case: +# - is hi(dividend) >= divisor ? if yes, then overflow + cmp.l %d7,%d5 + bls.b ddovf # answer won't fit in 32 bits + +# perform the divide algorithm: + bsr.l dclassical # do int divide + +# separate into signed and unsigned finishes. +divfinish: + btst &0x3, EXC_EXTWORD(%a6) # do divs, divu separately + beq.b ddone # divu has no processing!!! + +# it was a divs.l, so ccode setting is a little more complicated... + tst.b NDIVIDEND(%a6) # remainder has same sign + beq.b dcc # as dividend. + neg.l %d5 # sgn(rem) = sgn(dividend) +dcc: + mov.b NDIVISOR(%a6), %d0 + eor.b %d0, NDIVIDEND(%a6) # chk if quotient is negative + beq.b dqpos # branch to quot positive + +# 0x80000000 is the largest number representable as a 32-bit negative +# number. the negative of 0x80000000 is 0x80000000. + cmpi.l %d6, &0x80000000 # will (-quot) fit in 32 bits? + bhi.b ddovf + + neg.l %d6 # make (-quot) 2's comp + + bra.b ddone + +dqpos: + btst &0x1f, %d6 # will (+quot) fit in 32 bits? + bne.b ddovf + +ddone: +# at this point, result is normal so ccodes are set based on result. + mov.w EXC_CC(%a6), %cc + tst.l %d6 # set %ccode bits + mov.w %cc, EXC_CC(%a6) + + mov.w NDRSAVE(%a6), %d0 # get Dr off stack + mov.w NDQSAVE(%a6), %d1 # get Dq off stack + +# if the register numbers are the same, only the quotient gets saved. +# so, if we always save the quotient second, we save ourselves a cmp&beq + mov.l %d5, (EXC_DREGS,%a6,%d0.w*4) # save remainder + mov.l %d6, (EXC_DREGS,%a6,%d1.w*4) # save quotient + + rts + +ddovf: + bset &0x1, EXC_CC+1(%a6) # 'V' set on overflow + bclr &0x0, EXC_CC+1(%a6) # 'C' cleared on overflow + + rts + +div64eq0: + andi.b &0x1e, EXC_CC+1(%a6) # clear 'C' bit on divbyzero + ori.b &idbyz_flg,SPCOND_FLG(%a6) # set "special case" flag + rts + +########################################################################### +######################################################################### +# This routine uses the 'classical' Algorithm D from Donald Knuth's # +# Art of Computer Programming, vol II, Seminumerical Algorithms. # +# For this implementation b=2**16, and the target is U1U2U3U4/V1V2, # +# where U,V are words of the quadword dividend and longword divisor, # +# and U1, V1 are the most significant words. # +# # +# The most sig. longword of the 64 bit dividend must be in %d5, least # +# in %d6. The divisor must be in the variable ddivisor, and the # +# signed/unsigned flag ddusign must be set (0=unsigned,1=signed). # +# The quotient is returned in %d6, remainder in %d5, unless the # +# v (overflow) bit is set in the saved %ccr. If overflow, the dividend # +# is unchanged. # +######################################################################### +dclassical: +# if the divisor msw is 0, use simpler algorithm then the full blown +# one at ddknuth: + + cmpi.l %d7, &0xffff + bhi.b ddknuth # go use D. Knuth algorithm + +# Since the divisor is only a word (and larger than the mslw of the dividend), +# a simpler algorithm may be used : +# In the general case, four quotient words would be created by +# dividing the divisor word into each dividend word. In this case, +# the first two quotient words must be zero, or overflow would occur. +# Since we already checked this case above, we can treat the most significant +# longword of the dividend as (0) remainder (see Knuth) and merely complete +# the last two divisions to get a quotient longword and word remainder: + + clr.l %d1 + swap %d5 # same as r*b if previous step rqd + swap %d6 # get u3 to lsw position + mov.w %d6, %d5 # rb + u3 + + divu.w %d7, %d5 + + mov.w %d5, %d1 # first quotient word + swap %d6 # get u4 + mov.w %d6, %d5 # rb + u4 + + divu.w %d7, %d5 + + swap %d1 + mov.w %d5, %d1 # 2nd quotient 'digit' + clr.w %d5 + swap %d5 # now remainder + mov.l %d1, %d6 # and quotient + + rts + +ddknuth: +# In this algorithm, the divisor is treated as a 2 digit (word) number +# which is divided into a 3 digit (word) dividend to get one quotient +# digit (word). After subtraction, the dividend is shifted and the +# process repeated. Before beginning, the divisor and quotient are +# 'normalized' so that the process of estimating the quotient digit +# will yield verifiably correct results.. + + clr.l DDNORMAL(%a6) # count of shifts for normalization + clr.b DDSECOND(%a6) # clear flag for quotient digits + clr.l %d1 # %d1 will hold trial quotient +ddnchk: + btst &31, %d7 # must we normalize? first word of + bne.b ddnormalized # divisor (V1) must be >= 65536/2 + addq.l &0x1, DDNORMAL(%a6) # count normalization shifts + lsl.l &0x1, %d7 # shift the divisor + lsl.l &0x1, %d6 # shift u4,u3 with overflow to u2 + roxl.l &0x1, %d5 # shift u1,u2 + bra.w ddnchk +ddnormalized: + +# Now calculate an estimate of the quotient words (msw first, then lsw). +# The comments use subscripts for the first quotient digit determination. + mov.l %d7, %d3 # divisor + mov.l %d5, %d2 # dividend mslw + swap %d2 + swap %d3 + cmp.w %d2, %d3 # V1 = U1 ? + bne.b ddqcalc1 + mov.w &0xffff, %d1 # use max trial quotient word + bra.b ddadj0 +ddqcalc1: + mov.l %d5, %d1 + + divu.w %d3, %d1 # use quotient of mslw/msw + + andi.l &0x0000ffff, %d1 # zero any remainder +ddadj0: + +# now test the trial quotient and adjust. This step plus the +# normalization assures (according to Knuth) that the trial +# quotient will be at worst 1 too large. + mov.l %d6, -(%sp) + clr.w %d6 # word u3 left + swap %d6 # in lsw position +ddadj1: mov.l %d7, %d3 + mov.l %d1, %d2 + mulu.w %d7, %d2 # V2q + swap %d3 + mulu.w %d1, %d3 # V1q + mov.l %d5, %d4 # U1U2 + sub.l %d3, %d4 # U1U2 - V1q + + swap %d4 + + mov.w %d4,%d0 + mov.w %d6,%d4 # insert lower word (U3) + + tst.w %d0 # is upper word set? + bne.w ddadjd1 + +# add.l %d6, %d4 # (U1U2 - V1q) + U3 + + cmp.l %d2, %d4 + bls.b ddadjd1 # is V2q > (U1U2-V1q) + U3 ? + subq.l &0x1, %d1 # yes, decrement and recheck + bra.b ddadj1 +ddadjd1: +# now test the word by multiplying it by the divisor (V1V2) and comparing +# the 3 digit (word) result with the current dividend words + mov.l %d5, -(%sp) # save %d5 (%d6 already saved) + mov.l %d1, %d6 + swap %d6 # shift answer to ms 3 words + mov.l %d7, %d5 + bsr.l dmm2 + mov.l %d5, %d2 # now %d2,%d3 are trial*divisor + mov.l %d6, %d3 + mov.l (%sp)+, %d5 # restore dividend + mov.l (%sp)+, %d6 + sub.l %d3, %d6 + subx.l %d2, %d5 # subtract double precision + bcc dd2nd # no carry, do next quotient digit + subq.l &0x1, %d1 # q is one too large +# need to add back divisor longword to current ms 3 digits of dividend +# - according to Knuth, this is done only 2 out of 65536 times for random +# divisor, dividend selection. + clr.l %d2 + mov.l %d7, %d3 + swap %d3 + clr.w %d3 # %d3 now ls word of divisor + add.l %d3, %d6 # aligned with 3rd word of dividend + addx.l %d2, %d5 + mov.l %d7, %d3 + clr.w %d3 # %d3 now ms word of divisor + swap %d3 # aligned with 2nd word of dividend + add.l %d3, %d5 +dd2nd: + tst.b DDSECOND(%a6) # both q words done? + bne.b ddremain +# first quotient digit now correct. store digit and shift the +# (subtracted) dividend + mov.w %d1, DDQUOTIENT(%a6) + clr.l %d1 + swap %d5 + swap %d6 + mov.w %d6, %d5 + clr.w %d6 + st DDSECOND(%a6) # second digit + bra.w ddnormalized +ddremain: +# add 2nd word to quotient, get the remainder. + mov.w %d1, DDQUOTIENT+2(%a6) +# shift down one word/digit to renormalize remainder. + mov.w %d5, %d6 + swap %d6 + swap %d5 + mov.l DDNORMAL(%a6), %d7 # get norm shift count + beq.b ddrn + subq.l &0x1, %d7 # set for loop count +ddnlp: + lsr.l &0x1, %d5 # shift into %d6 + roxr.l &0x1, %d6 + dbf %d7, ddnlp +ddrn: + mov.l %d6, %d5 # remainder + mov.l DDQUOTIENT(%a6), %d6 # quotient + + rts +dmm2: +# factors for the 32X32->64 multiplication are in %d5 and %d6. +# returns 64 bit result in %d5 (hi) %d6(lo). +# destroys %d2,%d3,%d4. + +# multiply hi,lo words of each factor to get 4 intermediate products + mov.l %d6, %d2 + mov.l %d6, %d3 + mov.l %d5, %d4 + swap %d3 + swap %d4 + mulu.w %d5, %d6 # %d6 <- lsw*lsw + mulu.w %d3, %d5 # %d5 <- msw-dest*lsw-source + mulu.w %d4, %d2 # %d2 <- msw-source*lsw-dest + mulu.w %d4, %d3 # %d3 <- msw*msw +# now use swap and addx to consolidate to two longwords + clr.l %d4 + swap %d6 + add.w %d5, %d6 # add msw of l*l to lsw of m*l product + addx.w %d4, %d3 # add any carry to m*m product + add.w %d2, %d6 # add in lsw of other m*l product + addx.w %d4, %d3 # add any carry to m*m product + swap %d6 # %d6 is low 32 bits of final product + clr.w %d5 + clr.w %d2 # lsw of two mixed products used, + swap %d5 # now use msws of longwords + swap %d2 + add.l %d2, %d5 + add.l %d3, %d5 # %d5 now ms 32 bits of final product + rts + +########## +dcontrolmodel_s: + movq.l &LONG,%d0 + bsr.l _calc_ea # calc <ea> + + cmpi.b SPCOND_FLG(%a6),&immed_flg # immediate addressing mode? + beq.b dimmed # yes + + mov.l %a0,%a2 + bsr.l _dmem_read_long # fetch divisor from <ea> + + tst.l %d1 # dfetch error? + bne.b div64_err # yes + + mov.l %d0, %d7 + bra.w dgotsrcl + +# we have to split out immediate data here because it must be read using +# imem_read() instead of dmem_read(). this becomes especially important +# if the fetch runs into some deadly fault. +dimmed: + addq.l &0x4,EXC_EXTWPTR(%a6) + bsr.l _imem_read_long # read immediate value + + tst.l %d1 # ifetch error? + bne.l isp_iacc # yes + + mov.l %d0,%d7 + bra.w dgotsrcl + +########## + +# if dmem_read_long() returns a fail message in d1, the package +# must create an access error frame. here, we pass a skeleton fslw +# and the failing address to the routine that creates the new frame. +# also, we call isp_restore in case the effective addressing mode was +# (an)+ or -(an) in which case the previous "an" value must be restored. +# FSLW: +# read = true +# size = longword +# TM = data +# software emulation error = true +div64_err: + bsr.l isp_restore # restore addr reg + mov.l %a2,%a0 # pass failing address + mov.l &0x01010001,%d0 # pass fslw + bra.l isp_dacc + +######################################################################### +# XDEF **************************************************************** # +# _mul64(): routine to emulate mul{u,s}.l <ea>,Dh:Dl 32x32->64 # +# # +# XREF **************************************************************** # +# _calc_ea() - calculate effective address # +# isp_iacc() - handle instruction access error exception # +# isp_dacc() - handle data access error exception # +# isp_restore() - restore An on access error w/ -() or ()+ # +# # +# INPUT *************************************************************** # +# none # +# # +# OUTPUT ************************************************************** # +# If exiting through isp_dacc... # +# a0 = failing address # +# d0 = FSLW # +# else # +# none # +# # +# ALGORITHM *********************************************************** # +# First, decode the operand location. If it's in Dn, fetch from # +# the stack. If it's in memory, use _calc_ea() to calculate the # +# effective address. Use _dmem_read_long() to fetch at that address. # +# Unless the operand is immediate data. Then use _imem_read_long(). # +# Send failures to isp_dacc() or isp_iacc() as appropriate. # +# If the operands are signed, make them unsigned and save the # +# sign info for later. Perform the multiplication using 16x16->32 # +# unsigned multiplies and "add" instructions. Store the high and low # +# portions of the result in the appropriate data registers on the # +# stack. Calculate the condition codes, also. # +# # +######################################################################### + +############# +# mul(u,s)l # +############# + global _mul64 +_mul64: + mov.b EXC_OPWORD+1(%a6), %d0 # extract src {mode,reg} + cmpi.b %d0, &0x7 # is src mode Dn or other? + bgt.w mul64_memop # src is in memory + +# multiplier operand in the data register file. +# must extract the register number and fetch the operand from the stack. +mul64_regop: + andi.w &0x7, %d0 # extract Dn + mov.l (EXC_DREGS,%a6,%d0.w*4), %d3 # fetch multiplier + +# multiplier is in %d3. now, extract Dl and Dh fields and fetch the +# multiplicand from the data register specified by Dl. +mul64_multiplicand: + mov.w EXC_EXTWORD(%a6), %d2 # fetch ext word + clr.w %d1 # clear Dh reg + mov.b %d2, %d1 # grab Dh + rol.w &0x4, %d2 # align Dl byte + andi.w &0x7, %d2 # extract Dl + + mov.l (EXC_DREGS,%a6,%d2.w*4), %d4 # get multiplicand + +# check for the case of "zero" result early + tst.l %d4 # test multiplicand + beq.w mul64_zero # handle zero separately + tst.l %d3 # test multiplier + beq.w mul64_zero # handle zero separately + +# multiplier is in %d3 and multiplicand is in %d4. +# if the operation is to be signed, then the operands are converted +# to unsigned and the result sign is saved for the end. + clr.b EXC_TEMP(%a6) # clear temp space + btst &0x3, EXC_EXTWORD(%a6) # signed or unsigned? + beq.b mul64_alg # unsigned; skip sgn calc + + tst.l %d3 # is multiplier negative? + bge.b mul64_chk_md_sgn # no + neg.l %d3 # make multiplier positive + ori.b &0x1, EXC_TEMP(%a6) # save multiplier sgn + +# the result sign is the exclusive or of the operand sign bits. +mul64_chk_md_sgn: + tst.l %d4 # is multiplicand negative? + bge.b mul64_alg # no + neg.l %d4 # make multiplicand positive + eori.b &0x1, EXC_TEMP(%a6) # calculate correct sign + +######################################################################### +# 63 32 0 # +# ---------------------------- # +# | hi(mplier) * hi(mplicand)| # +# ---------------------------- # +# ----------------------------- # +# | hi(mplier) * lo(mplicand) | # +# ----------------------------- # +# ----------------------------- # +# | lo(mplier) * hi(mplicand) | # +# ----------------------------- # +# | ----------------------------- # +# --|-- | lo(mplier) * lo(mplicand) | # +# | ----------------------------- # +# ======================================================== # +# -------------------------------------------------------- # +# | hi(result) | lo(result) | # +# -------------------------------------------------------- # +######################################################################### +mul64_alg: +# load temp registers with operands + mov.l %d3, %d5 # mr in %d5 + mov.l %d3, %d6 # mr in %d6 + mov.l %d4, %d7 # md in %d7 + swap %d6 # hi(mr) in lo %d6 + swap %d7 # hi(md) in lo %d7 + +# complete necessary multiplies: + mulu.w %d4, %d3 # [1] lo(mr) * lo(md) + mulu.w %d6, %d4 # [2] hi(mr) * lo(md) + mulu.w %d7, %d5 # [3] lo(mr) * hi(md) + mulu.w %d7, %d6 # [4] hi(mr) * hi(md) + +# add lo portions of [2],[3] to hi portion of [1]. +# add carries produced from these adds to [4]. +# lo([1]) is the final lo 16 bits of the result. + clr.l %d7 # load %d7 w/ zero value + swap %d3 # hi([1]) <==> lo([1]) + add.w %d4, %d3 # hi([1]) + lo([2]) + addx.l %d7, %d6 # [4] + carry + add.w %d5, %d3 # hi([1]) + lo([3]) + addx.l %d7, %d6 # [4] + carry + swap %d3 # lo([1]) <==> hi([1]) + +# lo portions of [2],[3] have been added in to final result. +# now, clear lo, put hi in lo reg, and add to [4] + clr.w %d4 # clear lo([2]) + clr.w %d5 # clear hi([3]) + swap %d4 # hi([2]) in lo %d4 + swap %d5 # hi([3]) in lo %d5 + add.l %d5, %d4 # [4] + hi([2]) + add.l %d6, %d4 # [4] + hi([3]) + +# unsigned result is now in {%d4,%d3} + tst.b EXC_TEMP(%a6) # should result be signed? + beq.b mul64_done # no + +# result should be a signed negative number. +# compute 2's complement of the unsigned number: +# -negate all bits and add 1 +mul64_neg: + not.l %d3 # negate lo(result) bits + not.l %d4 # negate hi(result) bits + addq.l &1, %d3 # add 1 to lo(result) + addx.l %d7, %d4 # add carry to hi(result) + +# the result is saved to the register file. +# for '040 compatibility, if Dl == Dh then only the hi(result) is +# saved. so, saving hi after lo accomplishes this without need to +# check Dl,Dh equality. +mul64_done: + mov.l %d3, (EXC_DREGS,%a6,%d2.w*4) # save lo(result) + mov.w &0x0, %cc + mov.l %d4, (EXC_DREGS,%a6,%d1.w*4) # save hi(result) + +# now, grab the condition codes. only one that can be set is 'N'. +# 'N' CAN be set if the operation is unsigned if bit 63 is set. + mov.w %cc, %d7 # fetch %ccr to see if 'N' set + andi.b &0x8, %d7 # extract 'N' bit + +mul64_ccode_set: + mov.b EXC_CC+1(%a6), %d6 # fetch previous %ccr + andi.b &0x10, %d6 # all but 'X' bit changes + + or.b %d7, %d6 # group 'X' and 'N' + mov.b %d6, EXC_CC+1(%a6) # save new %ccr + + rts + +# one or both of the operands is zero so the result is also zero. +# save the zero result to the register file and set the 'Z' ccode bit. +mul64_zero: + clr.l (EXC_DREGS,%a6,%d2.w*4) # save lo(result) + clr.l (EXC_DREGS,%a6,%d1.w*4) # save hi(result) + + movq.l &0x4, %d7 # set 'Z' ccode bit + bra.b mul64_ccode_set # finish ccode set + +########## + +# multiplier operand is in memory at the effective address. +# must calculate the <ea> and go fetch the 32-bit operand. +mul64_memop: + movq.l &LONG, %d0 # pass # of bytes + bsr.l _calc_ea # calculate <ea> + + cmpi.b SPCOND_FLG(%a6),&immed_flg # immediate addressing mode? + beq.b mul64_immed # yes + + mov.l %a0,%a2 + bsr.l _dmem_read_long # fetch src from addr (%a0) + + tst.l %d1 # dfetch error? + bne.w mul64_err # yes + + mov.l %d0, %d3 # store multiplier in %d3 + + bra.w mul64_multiplicand + +# we have to split out immediate data here because it must be read using +# imem_read() instead of dmem_read(). this becomes especially important +# if the fetch runs into some deadly fault. +mul64_immed: + addq.l &0x4,EXC_EXTWPTR(%a6) + bsr.l _imem_read_long # read immediate value + + tst.l %d1 # ifetch error? + bne.l isp_iacc # yes + + mov.l %d0,%d3 + bra.w mul64_multiplicand + +########## + +# if dmem_read_long() returns a fail message in d1, the package +# must create an access error frame. here, we pass a skeleton fslw +# and the failing address to the routine that creates the new frame. +# also, we call isp_restore in case the effective addressing mode was +# (an)+ or -(an) in which case the previous "an" value must be restored. +# FSLW: +# read = true +# size = longword +# TM = data +# software emulation error = true +mul64_err: + bsr.l isp_restore # restore addr reg + mov.l %a2,%a0 # pass failing address + mov.l &0x01010001,%d0 # pass fslw + bra.l isp_dacc + +######################################################################### +# XDEF **************************************************************** # +# _compandset2(): routine to emulate cas2() # +# (internal to package) # +# # +# _isp_cas2_finish(): store ccodes, store compare regs # +# (external to package) # +# # +# XREF **************************************************************** # +# _real_lock_page() - "callout" to lock op's page from page-outs # +# _cas_terminate2() - access error exit # +# _real_cas2() - "callout" to core cas2 emulation code # +# _real_unlock_page() - "callout" to unlock page # +# # +# INPUT *************************************************************** # +# _compandset2(): # +# d0 = instruction extension word # +# # +# _isp_cas2_finish(): # +# see cas2 core emulation code # +# # +# OUTPUT ************************************************************** # +# _compandset2(): # +# see cas2 core emulation code # +# # +# _isp_cas_finish(): # +# None (register file or memroy changed as appropriate) # +# # +# ALGORITHM *********************************************************** # +# compandset2(): # +# Decode the instruction and fetch the appropriate Update and # +# Compare operands. Then call the "callout" _real_lock_page() for each # +# memory operand address so that the operating system can keep these # +# pages from being paged out. If either _real_lock_page() fails, exit # +# through _cas_terminate2(). Don't forget to unlock the 1st locked page # +# using _real_unlock_paged() if the 2nd lock-page fails. # +# Finally, branch to the core cas2 emulation code by calling the # +# "callout" _real_cas2(). # +# # +# _isp_cas2_finish(): # +# Re-perform the comparison so we can determine the condition # +# codes which were too much trouble to keep around during the locked # +# emulation. Then unlock each operands page by calling the "callout" # +# _real_unlock_page(). # +# # +######################################################################### + +set ADDR1, EXC_TEMP+0xc +set ADDR2, EXC_TEMP+0x0 +set DC2, EXC_TEMP+0xa +set DC1, EXC_TEMP+0x8 + + global _compandset2 +_compandset2: + mov.l %d0,EXC_TEMP+0x4(%a6) # store for possible restart + mov.l %d0,%d1 # extension word in d0 + + rol.w &0x4,%d0 + andi.w &0xf,%d0 # extract Rn2 + mov.l (EXC_DREGS,%a6,%d0.w*4),%a1 # fetch ADDR2 + mov.l %a1,ADDR2(%a6) + + mov.l %d1,%d0 + + lsr.w &0x6,%d1 + andi.w &0x7,%d1 # extract Du2 + mov.l (EXC_DREGS,%a6,%d1.w*4),%d5 # fetch Update2 Op + + andi.w &0x7,%d0 # extract Dc2 + mov.l (EXC_DREGS,%a6,%d0.w*4),%d3 # fetch Compare2 Op + mov.w %d0,DC2(%a6) + + mov.w EXC_EXTWORD(%a6),%d0 + mov.l %d0,%d1 + + rol.w &0x4,%d0 + andi.w &0xf,%d0 # extract Rn1 + mov.l (EXC_DREGS,%a6,%d0.w*4),%a0 # fetch ADDR1 + mov.l %a0,ADDR1(%a6) + + mov.l %d1,%d0 + + lsr.w &0x6,%d1 + andi.w &0x7,%d1 # extract Du1 + mov.l (EXC_DREGS,%a6,%d1.w*4),%d4 # fetch Update1 Op + + andi.w &0x7,%d0 # extract Dc1 + mov.l (EXC_DREGS,%a6,%d0.w*4),%d2 # fetch Compare1 Op + mov.w %d0,DC1(%a6) + + btst &0x1,EXC_OPWORD(%a6) # word or long? + sne %d7 + + btst &0x5,EXC_ISR(%a6) # user or supervisor? + sne %d6 + + mov.l %a0,%a2 + mov.l %a1,%a3 + + mov.l %d7,%d1 # pass size + mov.l %d6,%d0 # pass mode + bsr.l _real_lock_page # lock page + mov.l %a2,%a0 + tst.l %d0 # error? + bne.l _cas_terminate2 # yes + + mov.l %d7,%d1 # pass size + mov.l %d6,%d0 # pass mode + mov.l %a3,%a0 # pass addr + bsr.l _real_lock_page # lock page + mov.l %a3,%a0 + tst.l %d0 # error? + bne.b cas_preterm # yes + + mov.l %a2,%a0 + mov.l %a3,%a1 + + bra.l _real_cas2 + +# if the 2nd lock attempt fails, then we must still unlock the +# first page(s). +cas_preterm: + mov.l %d0,-(%sp) # save FSLW + mov.l %d7,%d1 # pass size + mov.l %d6,%d0 # pass mode + mov.l %a2,%a0 # pass ADDR1 + bsr.l _real_unlock_page # unlock first page(s) + mov.l (%sp)+,%d0 # restore FSLW + mov.l %a3,%a0 # pass failing addr + bra.l _cas_terminate2 + +############################################################# + + global _isp_cas2_finish +_isp_cas2_finish: + btst &0x1,EXC_OPWORD(%a6) + bne.b cas2_finish_l + + mov.w EXC_CC(%a6),%cc # load old ccodes + cmp.w %d0,%d2 + bne.b cas2_finish_w_save + cmp.w %d1,%d3 +cas2_finish_w_save: + mov.w %cc,EXC_CC(%a6) # save new ccodes + + tst.b %d4 # update compare reg? + bne.b cas2_finish_w_done # no + + mov.w DC2(%a6),%d3 # fetch Dc2 + mov.w %d1,(2+EXC_DREGS,%a6,%d3.w*4) # store new Compare2 Op + + mov.w DC1(%a6),%d2 # fetch Dc1 + mov.w %d0,(2+EXC_DREGS,%a6,%d2.w*4) # store new Compare1 Op + +cas2_finish_w_done: + btst &0x5,EXC_ISR(%a6) + sne %d2 + mov.l %d2,%d0 # pass mode + sf %d1 # pass size + mov.l ADDR1(%a6),%a0 # pass ADDR1 + bsr.l _real_unlock_page # unlock page + + mov.l %d2,%d0 # pass mode + sf %d1 # pass size + mov.l ADDR2(%a6),%a0 # pass ADDR2 + bsr.l _real_unlock_page # unlock page + rts + +cas2_finish_l: + mov.w EXC_CC(%a6),%cc # load old ccodes + cmp.l %d0,%d2 + bne.b cas2_finish_l_save + cmp.l %d1,%d3 +cas2_finish_l_save: + mov.w %cc,EXC_CC(%a6) # save new ccodes + + tst.b %d4 # update compare reg? + bne.b cas2_finish_l_done # no + + mov.w DC2(%a6),%d3 # fetch Dc2 + mov.l %d1,(EXC_DREGS,%a6,%d3.w*4) # store new Compare2 Op + + mov.w DC1(%a6),%d2 # fetch Dc1 + mov.l %d0,(EXC_DREGS,%a6,%d2.w*4) # store new Compare1 Op + +cas2_finish_l_done: + btst &0x5,EXC_ISR(%a6) + sne %d2 + mov.l %d2,%d0 # pass mode + st %d1 # pass size + mov.l ADDR1(%a6),%a0 # pass ADDR1 + bsr.l _real_unlock_page # unlock page + + mov.l %d2,%d0 # pass mode + st %d1 # pass size + mov.l ADDR2(%a6),%a0 # pass ADDR2 + bsr.l _real_unlock_page # unlock page + rts + +######## + global cr_cas2 +cr_cas2: + mov.l EXC_TEMP+0x4(%a6),%d0 + bra.w _compandset2 + +######################################################################### +# XDEF **************************************************************** # +# _compandset(): routine to emulate cas w/ misaligned <ea> # +# (internal to package) # +# _isp_cas_finish(): routine called when cas emulation completes # +# (external and internal to package) # +# _isp_cas_restart(): restart cas emulation after a fault # +# (external to package) # +# _isp_cas_terminate(): create access error stack frame on fault # +# (external and internal to package) # +# _isp_cas_inrange(): checks whether instr addess is within range # +# of core cas/cas2emulation code # +# (external to package) # +# # +# XREF **************************************************************** # +# _calc_ea(): calculate effective address # +# # +# INPUT *************************************************************** # +# compandset(): # +# none # +# _isp_cas_restart(): # +# d6 = previous sfc/dfc # +# _isp_cas_finish(): # +# _isp_cas_terminate(): # +# a0 = failing address # +# d0 = FSLW # +# d6 = previous sfc/dfc # +# _isp_cas_inrange(): # +# a0 = instruction address to be checked # +# # +# OUTPUT ************************************************************** # +# compandset(): # +# none # +# _isp_cas_restart(): # +# a0 = effective address # +# d7 = word or longword flag # +# _isp_cas_finish(): # +# a0 = effective address # +# _isp_cas_terminate(): # +# initial register set before emulation exception # +# _isp_cas_inrange(): # +# d0 = 0 => in range; -1 => out of range # +# # +# ALGORITHM *********************************************************** # +# # +# compandset(): # +# First, calculate the effective address. Then, decode the # +# instruction word and fetch the "compare" (DC) and "update" (Du) # +# operands. # +# Next, call the external routine _real_lock_page() so that the # +# operating system can keep this page from being paged out while we're # +# in this routine. If this call fails, jump to _cas_terminate2(). # +# The routine then branches to _real_cas(). This external routine # +# that actually emulates cas can be supplied by the external os or # +# made to point directly back into the 060ISP which has a routine for # +# this purpose. # +# # +# _isp_cas_finish(): # +# Either way, after emulation, the package is re-entered at # +# _isp_cas_finish(). This routine re-compares the operands in order to # +# set the condition codes. Finally, these routines will call # +# _real_unlock_page() in order to unlock the pages that were previously # +# locked. # +# # +# _isp_cas_restart(): # +# This routine can be entered from an access error handler where # +# the emulation sequence should be re-started from the beginning. # +# # +# _isp_cas_terminate(): # +# This routine can be entered from an access error handler where # +# an emulation operand access failed and the operating system would # +# like an access error stack frame created instead of the current # +# unimplemented integer instruction frame. # +# Also, the package enters here if a call to _real_lock_page() # +# fails. # +# # +# _isp_cas_inrange(): # +# Checks to see whether the instruction address passed to it in # +# a0 is within the software package cas/cas2 emulation routines. This # +# can be helpful for an operating system to determine whether an access # +# error during emulation was due to a cas/cas2 emulation access. # +# # +######################################################################### + +set DC, EXC_TEMP+0x8 +set ADDR, EXC_TEMP+0x4 + + global _compandset +_compandset: + btst &0x1,EXC_OPWORD(%a6) # word or long operation? + bne.b compandsetl # long + +compandsetw: + movq.l &0x2,%d0 # size = 2 bytes + bsr.l _calc_ea # a0 = calculated <ea> + mov.l %a0,ADDR(%a6) # save <ea> for possible restart + sf %d7 # clear d7 for word size + bra.b compandsetfetch + +compandsetl: + movq.l &0x4,%d0 # size = 4 bytes + bsr.l _calc_ea # a0 = calculated <ea> + mov.l %a0,ADDR(%a6) # save <ea> for possible restart + st %d7 # set d7 for longword size + +compandsetfetch: + mov.w EXC_EXTWORD(%a6),%d0 # fetch cas extension word + mov.l %d0,%d1 # make a copy + + lsr.w &0x6,%d0 + andi.w &0x7,%d0 # extract Du + mov.l (EXC_DREGS,%a6,%d0.w*4),%d2 # get update operand + + andi.w &0x7,%d1 # extract Dc + mov.l (EXC_DREGS,%a6,%d1.w*4),%d4 # get compare operand + mov.w %d1,DC(%a6) # save Dc + + btst &0x5,EXC_ISR(%a6) # which mode for exception? + sne %d6 # set on supervisor mode + + mov.l %a0,%a2 # save temporarily + mov.l %d7,%d1 # pass size + mov.l %d6,%d0 # pass mode + bsr.l _real_lock_page # lock page + tst.l %d0 # did error occur? + bne.w _cas_terminate2 # yes, clean up the mess + mov.l %a2,%a0 # pass addr in a0 + + bra.l _real_cas + +######## + global _isp_cas_finish +_isp_cas_finish: + btst &0x1,EXC_OPWORD(%a6) + bne.b cas_finish_l + +# just do the compare again since it's faster than saving the ccodes +# from the locked routine... +cas_finish_w: + mov.w EXC_CC(%a6),%cc # restore cc + cmp.w %d0,%d4 # do word compare + mov.w %cc,EXC_CC(%a6) # save cc + + tst.b %d1 # update compare reg? + bne.b cas_finish_w_done # no + + mov.w DC(%a6),%d3 + mov.w %d0,(EXC_DREGS+2,%a6,%d3.w*4) # Dc = destination + +cas_finish_w_done: + mov.l ADDR(%a6),%a0 # pass addr + sf %d1 # pass size + btst &0x5,EXC_ISR(%a6) + sne %d0 # pass mode + bsr.l _real_unlock_page # unlock page + rts + +# just do the compare again since it's faster than saving the ccodes +# from the locked routine... +cas_finish_l: + mov.w EXC_CC(%a6),%cc # restore cc + cmp.l %d0,%d4 # do longword compare + mov.w %cc,EXC_CC(%a6) # save cc + + tst.b %d1 # update compare reg? + bne.b cas_finish_l_done # no + + mov.w DC(%a6),%d3 + mov.l %d0,(EXC_DREGS,%a6,%d3.w*4) # Dc = destination + +cas_finish_l_done: + mov.l ADDR(%a6),%a0 # pass addr + st %d1 # pass size + btst &0x5,EXC_ISR(%a6) + sne %d0 # pass mode + bsr.l _real_unlock_page # unlock page + rts + +######## + + global _isp_cas_restart +_isp_cas_restart: + mov.l %d6,%sfc # restore previous sfc + mov.l %d6,%dfc # restore previous dfc + + cmpi.b EXC_OPWORD+1(%a6),&0xfc # cas or cas2? + beq.l cr_cas2 # cas2 +cr_cas: + mov.l ADDR(%a6),%a0 # load <ea> + btst &0x1,EXC_OPWORD(%a6) # word or long operation? + sne %d7 # set d7 accordingly + bra.w compandsetfetch + +######## + +# At this stage, it would be nice if d0 held the FSLW. + global _isp_cas_terminate +_isp_cas_terminate: + mov.l %d6,%sfc # restore previous sfc + mov.l %d6,%dfc # restore previous dfc + + global _cas_terminate2 +_cas_terminate2: + mov.l %a0,%a2 # copy failing addr to a2 + + mov.l %d0,-(%sp) + bsr.l isp_restore # restore An (if ()+ or -()) + mov.l (%sp)+,%d0 + + addq.l &0x4,%sp # remove sub return addr + subq.l &0x8,%sp # make room for bigger stack + subq.l &0x8,%a6 # shift frame ptr down, too + mov.l &26,%d1 # want to move 51 longwords + lea 0x8(%sp),%a0 # get address of old stack + lea 0x0(%sp),%a1 # get address of new stack +cas_term_cont: + mov.l (%a0)+,(%a1)+ # move a longword + dbra.w %d1,cas_term_cont # keep going + + mov.w &0x4008,EXC_IVOFF(%a6) # put new stk fmt, voff + mov.l %a2,EXC_IVOFF+0x2(%a6) # put faulting addr on stack + mov.l %d0,EXC_IVOFF+0x6(%a6) # put FSLW on stack + movm.l EXC_DREGS(%a6),&0x3fff # restore user regs + unlk %a6 # unlink stack frame + bra.l _real_access + +######## + + global _isp_cas_inrange +_isp_cas_inrange: + clr.l %d0 # clear return result + lea _CASHI(%pc),%a1 # load end of CAS core code + cmp.l %a1,%a0 # is PC in range? + blt.b cin_no # no + lea _CASLO(%pc),%a1 # load begin of CAS core code + cmp.l %a0,%a1 # is PC in range? + blt.b cin_no # no + rts # yes; return d0 = 0 +cin_no: + mov.l &-0x1,%d0 # out of range; return d0 = -1 + rts + +################################################################# +################################################################# +################################################################# +# This is the start of the cas and cas2 "core" emulation code. # +# This is the section that may need to be replaced by the host # +# OS if it is too operating system-specific. # +# Please refer to the package documentation to see how to # +# "replace" this section, if necessary. # +################################################################# +################################################################# +################################################################# + +# ###### ## ###### #### +# # # # # # # +# # ###### ###### # +# # # # # # +# ###### # # ###### ###### + +######################################################################### +# XDEF **************************************************************** # +# _isp_cas2(): "core" emulation code for the cas2 instruction # +# # +# XREF **************************************************************** # +# _isp_cas2_finish() - only exit point for this emulation code; # +# do clean-up; calculate ccodes; store # +# Compare Ops if appropriate. # +# # +# INPUT *************************************************************** # +# *see chart below* # +# # +# OUTPUT ************************************************************** # +# *see chart below* # +# # +# ALGORITHM *********************************************************** # +# (1) Make several copies of the effective address. # +# (2) Save current SR; Then mask off all maskable interrupts. # +# (3) Save current SFC/DFC (ASSUMED TO BE EQUAL!!!); Then set # +# according to whether exception occurred in user or # +# supervisor mode. # +# (4) Use "plpaw" instruction to pre-load ATC with effective # +# address pages(s). THIS SHOULD NOT FAULT!!! The relevant # +# page(s) should have already been made resident prior to # +# entering this routine. # +# (5) Push the operand lines from the cache w/ "cpushl". # +# In the 68040, this was done within the locked region. In # +# the 68060, it is done outside of the locked region. # +# (6) Use "plpar" instruction to do a re-load of ATC entries for # +# ADDR1 since ADDR2 entries may have pushed ADDR1 out of the # +# ATC. # +# (7) Pre-fetch the core emulation instructions by executing # +# one branch within each physical line (16 bytes) of the code # +# before actually executing the code. # +# (8) Load the BUSCR w/ the bus lock value. # +# (9) Fetch the source operands using "moves". # +# (10)Do the compares. If both equal, go to step (13). # +# (11)Unequal. No update occurs. But, we do write the DST1 op # +# back to itself (as w/ the '040) so we can gracefully unlock # +# the bus (and assert LOCKE*) using BUSCR and the final move. # +# (12)Exit. # +# (13)Write update operand to the DST locations. Use BUSCR to # +# assert LOCKE* for the final write operation. # +# (14)Exit. # +# # +# The algorithm is actually implemented slightly differently # +# depending on the size of the operation and the misalignment of the # +# operands. A misaligned operand must be written in aligned chunks or # +# else the BUSCR register control gets confused. # +# # +######################################################################### + +################################################################# +# THIS IS THE STATE OF THE INTEGER REGISTER FILE UPON # +# ENTERING _isp_cas2(). # +# # +# D0 = xxxxxxxx # +# D1 = xxxxxxxx # +# D2 = cmp operand 1 # +# D3 = cmp operand 2 # +# D4 = update oper 1 # +# D5 = update oper 2 # +# D6 = 'xxxxxxff if supervisor mode; 'xxxxxx00 if user mode # +# D7 = 'xxxxxxff if longword operation; 'xxxxxx00 if word # +# A0 = ADDR1 # +# A1 = ADDR2 # +# A2 = xxxxxxxx # +# A3 = xxxxxxxx # +# A4 = xxxxxxxx # +# A5 = xxxxxxxx # +# A6 = frame pointer # +# A7 = stack pointer # +################################################################# + +# align 0x1000 +# beginning label used by _isp_cas_inrange() + global _CASLO +_CASLO: + + global _isp_cas2 +_isp_cas2: + tst.b %d6 # user or supervisor mode? + bne.b cas2_supervisor # supervisor +cas2_user: + movq.l &0x1,%d0 # load user data fc + bra.b cas2_cont +cas2_supervisor: + movq.l &0x5,%d0 # load supervisor data fc +cas2_cont: + tst.b %d7 # word or longword? + beq.w cas2w # word + +#### +cas2l: + mov.l %a0,%a2 # copy ADDR1 + mov.l %a1,%a3 # copy ADDR2 + mov.l %a0,%a4 # copy ADDR1 + mov.l %a1,%a5 # copy ADDR2 + + addq.l &0x3,%a4 # ADDR1+3 + addq.l &0x3,%a5 # ADDR2+3 + mov.l %a2,%d1 # ADDR1 + +# mask interrupts levels 0-6. save old mask value. + mov.w %sr,%d7 # save current SR + ori.w &0x0700,%sr # inhibit interrupts + +# load the SFC and DFC with the appropriate mode. + movc %sfc,%d6 # save old SFC/DFC + movc %d0,%sfc # store new SFC + movc %d0,%dfc # store new DFC + +# pre-load the operand ATC. no page faults should occur here because +# _real_lock_page() should have taken care of this. + plpaw (%a2) # load atc for ADDR1 + plpaw (%a4) # load atc for ADDR1+3 + plpaw (%a3) # load atc for ADDR2 + plpaw (%a5) # load atc for ADDR2+3 + +# push the operand lines from the cache if they exist. + cpushl %dc,(%a2) # push line for ADDR1 + cpushl %dc,(%a4) # push line for ADDR1+3 + cpushl %dc,(%a3) # push line for ADDR2 + cpushl %dc,(%a5) # push line for ADDR2+2 + + mov.l %d1,%a2 # ADDR1 + addq.l &0x3,%d1 + mov.l %d1,%a4 # ADDR1+3 +# if ADDR1 was ATC resident before the above "plpaw" and was executed +# and it was the next entry scheduled for replacement and ADDR2 +# shares the same set, then the "plpaw" for ADDR2 can push the ADDR1 +# entries from the ATC. so, we do a second set of "plpa"s. + plpar (%a2) # load atc for ADDR1 + plpar (%a4) # load atc for ADDR1+3 + +# load the BUSCR values. + mov.l &0x80000000,%a2 # assert LOCK* buscr value + mov.l &0xa0000000,%a3 # assert LOCKE* buscr value + mov.l &0x00000000,%a4 # buscr unlock value + +# there are three possible mis-aligned cases for longword cas. they +# are separated because the final write which asserts LOCKE* must +# be aligned. + mov.l %a0,%d0 # is ADDR1 misaligned? + andi.b &0x3,%d0 + beq.b CAS2L_ENTER # no + cmpi.b %d0,&0x2 + beq.w CAS2L2_ENTER # yes; word misaligned + bra.w CAS2L3_ENTER # yes; byte misaligned + +# +# D0 = dst operand 1 <- +# D1 = dst operand 2 <- +# D2 = cmp operand 1 +# D3 = cmp operand 2 +# D4 = update oper 1 +# D5 = update oper 2 +# D6 = old SFC/DFC +# D7 = old SR +# A0 = ADDR1 +# A1 = ADDR2 +# A2 = bus LOCK* value +# A3 = bus LOCKE* value +# A4 = bus unlock value +# A5 = xxxxxxxx +# + align 0x10 +CAS2L_START: + movc %a2,%buscr # assert LOCK* + movs.l (%a1),%d1 # fetch Dest2[31:0] + movs.l (%a0),%d0 # fetch Dest1[31:0] + bra.b CAS2L_CONT +CAS2L_ENTER: + bra.b ~+16 + +CAS2L_CONT: + cmp.l %d0,%d2 # Dest1 - Compare1 + bne.b CAS2L_NOUPDATE + cmp.l %d1,%d3 # Dest2 - Compare2 + bne.b CAS2L_NOUPDATE + movs.l %d5,(%a1) # Update2[31:0] -> DEST2 + bra.b CAS2L_UPDATE + bra.b ~+16 + +CAS2L_UPDATE: + movc %a3,%buscr # assert LOCKE* + movs.l %d4,(%a0) # Update1[31:0] -> DEST1 + movc %a4,%buscr # unlock the bus + bra.b cas2l_update_done + bra.b ~+16 + +CAS2L_NOUPDATE: + movc %a3,%buscr # assert LOCKE* + movs.l %d0,(%a0) # Dest1[31:0] -> DEST1 + movc %a4,%buscr # unlock the bus + bra.b cas2l_noupdate_done + bra.b ~+16 + +CAS2L_FILLER: + nop + nop + nop + nop + nop + nop + nop + bra.b CAS2L_START + +#### + +################################################################# +# THIS MUST BE THE STATE OF THE INTEGER REGISTER FILE UPON # +# ENTERING _isp_cas2(). # +# # +# D0 = destination[31:0] operand 1 # +# D1 = destination[31:0] operand 2 # +# D2 = cmp[31:0] operand 1 # +# D3 = cmp[31:0] operand 2 # +# D4 = 'xxxxxx11 -> no reg update; 'xxxxxx00 -> update required # +# D5 = xxxxxxxx # +# D6 = xxxxxxxx # +# D7 = xxxxxxxx # +# A0 = xxxxxxxx # +# A1 = xxxxxxxx # +# A2 = xxxxxxxx # +# A3 = xxxxxxxx # +# A4 = xxxxxxxx # +# A5 = xxxxxxxx # +# A6 = frame pointer # +# A7 = stack pointer # +################################################################# + +cas2l_noupdate_done: + +# restore previous SFC/DFC value. + movc %d6,%sfc # restore old SFC + movc %d6,%dfc # restore old DFC + +# restore previous interrupt mask level. + mov.w %d7,%sr # restore old SR + + sf %d4 # indicate no update was done + bra.l _isp_cas2_finish + +cas2l_update_done: + +# restore previous SFC/DFC value. + movc %d6,%sfc # restore old SFC + movc %d6,%dfc # restore old DFC + +# restore previous interrupt mask level. + mov.w %d7,%sr # restore old SR + + st %d4 # indicate update was done + bra.l _isp_cas2_finish +#### + + align 0x10 +CAS2L2_START: + movc %a2,%buscr # assert LOCK* + movs.l (%a1),%d1 # fetch Dest2[31:0] + movs.l (%a0),%d0 # fetch Dest1[31:0] + bra.b CAS2L2_CONT +CAS2L2_ENTER: + bra.b ~+16 + +CAS2L2_CONT: + cmp.l %d0,%d2 # Dest1 - Compare1 + bne.b CAS2L2_NOUPDATE + cmp.l %d1,%d3 # Dest2 - Compare2 + bne.b CAS2L2_NOUPDATE + movs.l %d5,(%a1) # Update2[31:0] -> Dest2 + bra.b CAS2L2_UPDATE + bra.b ~+16 + +CAS2L2_UPDATE: + swap %d4 # get Update1[31:16] + movs.w %d4,(%a0)+ # Update1[31:16] -> DEST1 + movc %a3,%buscr # assert LOCKE* + swap %d4 # get Update1[15:0] + bra.b CAS2L2_UPDATE2 + bra.b ~+16 + +CAS2L2_UPDATE2: + movs.w %d4,(%a0) # Update1[15:0] -> DEST1+0x2 + movc %a4,%buscr # unlock the bus + bra.w cas2l_update_done + nop + bra.b ~+16 + +CAS2L2_NOUPDATE: + swap %d0 # get Dest1[31:16] + movs.w %d0,(%a0)+ # Dest1[31:16] -> DEST1 + movc %a3,%buscr # assert LOCKE* + swap %d0 # get Dest1[15:0] + bra.b CAS2L2_NOUPDATE2 + bra.b ~+16 + +CAS2L2_NOUPDATE2: + movs.w %d0,(%a0) # Dest1[15:0] -> DEST1+0x2 + movc %a4,%buscr # unlock the bus + bra.w cas2l_noupdate_done + nop + bra.b ~+16 + +CAS2L2_FILLER: + nop + nop + nop + nop + nop + nop + nop + bra.b CAS2L2_START + +################################# + + align 0x10 +CAS2L3_START: + movc %a2,%buscr # assert LOCK* + movs.l (%a1),%d1 # fetch Dest2[31:0] + movs.l (%a0),%d0 # fetch Dest1[31:0] + bra.b CAS2L3_CONT +CAS2L3_ENTER: + bra.b ~+16 + +CAS2L3_CONT: + cmp.l %d0,%d2 # Dest1 - Compare1 + bne.b CAS2L3_NOUPDATE + cmp.l %d1,%d3 # Dest2 - Compare2 + bne.b CAS2L3_NOUPDATE + movs.l %d5,(%a1) # Update2[31:0] -> DEST2 + bra.b CAS2L3_UPDATE + bra.b ~+16 + +CAS2L3_UPDATE: + rol.l &0x8,%d4 # get Update1[31:24] + movs.b %d4,(%a0)+ # Update1[31:24] -> DEST1 + swap %d4 # get Update1[23:8] + movs.w %d4,(%a0)+ # Update1[23:8] -> DEST1+0x1 + bra.b CAS2L3_UPDATE2 + bra.b ~+16 + +CAS2L3_UPDATE2: + rol.l &0x8,%d4 # get Update1[7:0] + movc %a3,%buscr # assert LOCKE* + movs.b %d4,(%a0) # Update1[7:0] -> DEST1+0x3 + bra.b CAS2L3_UPDATE3 + nop + bra.b ~+16 + +CAS2L3_UPDATE3: + movc %a4,%buscr # unlock the bus + bra.w cas2l_update_done + nop + nop + nop + bra.b ~+16 + +CAS2L3_NOUPDATE: + rol.l &0x8,%d0 # get Dest1[31:24] + movs.b %d0,(%a0)+ # Dest1[31:24] -> DEST1 + swap %d0 # get Dest1[23:8] + movs.w %d0,(%a0)+ # Dest1[23:8] -> DEST1+0x1 + bra.b CAS2L3_NOUPDATE2 + bra.b ~+16 + +CAS2L3_NOUPDATE2: + rol.l &0x8,%d0 # get Dest1[7:0] + movc %a3,%buscr # assert LOCKE* + movs.b %d0,(%a0) # Update1[7:0] -> DEST1+0x3 + bra.b CAS2L3_NOUPDATE3 + nop + bra.b ~+16 + +CAS2L3_NOUPDATE3: + movc %a4,%buscr # unlock the bus + bra.w cas2l_noupdate_done + nop + nop + nop + bra.b ~+14 + +CAS2L3_FILLER: + nop + nop + nop + nop + nop + nop + bra.w CAS2L3_START + +############################################################# +############################################################# + +cas2w: + mov.l %a0,%a2 # copy ADDR1 + mov.l %a1,%a3 # copy ADDR2 + mov.l %a0,%a4 # copy ADDR1 + mov.l %a1,%a5 # copy ADDR2 + + addq.l &0x1,%a4 # ADDR1+1 + addq.l &0x1,%a5 # ADDR2+1 + mov.l %a2,%d1 # ADDR1 + +# mask interrupt levels 0-6. save old mask value. + mov.w %sr,%d7 # save current SR + ori.w &0x0700,%sr # inhibit interrupts + +# load the SFC and DFC with the appropriate mode. + movc %sfc,%d6 # save old SFC/DFC + movc %d0,%sfc # store new SFC + movc %d0,%dfc # store new DFC + +# pre-load the operand ATC. no page faults should occur because +# _real_lock_page() should have taken care of this. + plpaw (%a2) # load atc for ADDR1 + plpaw (%a4) # load atc for ADDR1+1 + plpaw (%a3) # load atc for ADDR2 + plpaw (%a5) # load atc for ADDR2+1 + +# push the operand cache lines from the cache if they exist. + cpushl %dc,(%a2) # push line for ADDR1 + cpushl %dc,(%a4) # push line for ADDR1+1 + cpushl %dc,(%a3) # push line for ADDR2 + cpushl %dc,(%a5) # push line for ADDR2+1 + + mov.l %d1,%a2 # ADDR1 + addq.l &0x3,%d1 + mov.l %d1,%a4 # ADDR1+3 +# if ADDR1 was ATC resident before the above "plpaw" and was executed +# and it was the next entry scheduled for replacement and ADDR2 +# shares the same set, then the "plpaw" for ADDR2 can push the ADDR1 +# entries from the ATC. so, we do a second set of "plpa"s. + plpar (%a2) # load atc for ADDR1 + plpar (%a4) # load atc for ADDR1+3 + +# load the BUSCR values. + mov.l &0x80000000,%a2 # assert LOCK* buscr value + mov.l &0xa0000000,%a3 # assert LOCKE* buscr value + mov.l &0x00000000,%a4 # buscr unlock value + +# there are two possible mis-aligned cases for word cas. they +# are separated because the final write which asserts LOCKE* must +# be aligned. + mov.l %a0,%d0 # is ADDR1 misaligned? + btst &0x0,%d0 + bne.w CAS2W2_ENTER # yes + bra.b CAS2W_ENTER # no + +# +# D0 = dst operand 1 <- +# D1 = dst operand 2 <- +# D2 = cmp operand 1 +# D3 = cmp operand 2 +# D4 = update oper 1 +# D5 = update oper 2 +# D6 = old SFC/DFC +# D7 = old SR +# A0 = ADDR1 +# A1 = ADDR2 +# A2 = bus LOCK* value +# A3 = bus LOCKE* value +# A4 = bus unlock value +# A5 = xxxxxxxx +# + align 0x10 +CAS2W_START: + movc %a2,%buscr # assert LOCK* + movs.w (%a1),%d1 # fetch Dest2[15:0] + movs.w (%a0),%d0 # fetch Dest1[15:0] + bra.b CAS2W_CONT2 +CAS2W_ENTER: + bra.b ~+16 + +CAS2W_CONT2: + cmp.w %d0,%d2 # Dest1 - Compare1 + bne.b CAS2W_NOUPDATE + cmp.w %d1,%d3 # Dest2 - Compare2 + bne.b CAS2W_NOUPDATE + movs.w %d5,(%a1) # Update2[15:0] -> DEST2 + bra.b CAS2W_UPDATE + bra.b ~+16 + +CAS2W_UPDATE: + movc %a3,%buscr # assert LOCKE* + movs.w %d4,(%a0) # Update1[15:0] -> DEST1 + movc %a4,%buscr # unlock the bus + bra.b cas2w_update_done + bra.b ~+16 + +CAS2W_NOUPDATE: + movc %a3,%buscr # assert LOCKE* + movs.w %d0,(%a0) # Dest1[15:0] -> DEST1 + movc %a4,%buscr # unlock the bus + bra.b cas2w_noupdate_done + bra.b ~+16 + +CAS2W_FILLER: + nop + nop + nop + nop + nop + nop + nop + bra.b CAS2W_START + +#### + +################################################################# +# THIS MUST BE THE STATE OF THE INTEGER REGISTER FILE UPON # +# ENTERING _isp_cas2(). # +# # +# D0 = destination[15:0] operand 1 # +# D1 = destination[15:0] operand 2 # +# D2 = cmp[15:0] operand 1 # +# D3 = cmp[15:0] operand 2 # +# D4 = 'xxxxxx11 -> no reg update; 'xxxxxx00 -> update required # +# D5 = xxxxxxxx # +# D6 = xxxxxxxx # +# D7 = xxxxxxxx # +# A0 = xxxxxxxx # +# A1 = xxxxxxxx # +# A2 = xxxxxxxx # +# A3 = xxxxxxxx # +# A4 = xxxxxxxx # +# A5 = xxxxxxxx # +# A6 = frame pointer # +# A7 = stack pointer # +################################################################# + +cas2w_noupdate_done: + +# restore previous SFC/DFC value. + movc %d6,%sfc # restore old SFC + movc %d6,%dfc # restore old DFC + +# restore previous interrupt mask level. + mov.w %d7,%sr # restore old SR + + sf %d4 # indicate no update was done + bra.l _isp_cas2_finish + +cas2w_update_done: + +# restore previous SFC/DFC value. + movc %d6,%sfc # restore old SFC + movc %d6,%dfc # restore old DFC + +# restore previous interrupt mask level. + mov.w %d7,%sr # restore old SR + + st %d4 # indicate update was done + bra.l _isp_cas2_finish +#### + + align 0x10 +CAS2W2_START: + movc %a2,%buscr # assert LOCK* + movs.w (%a1),%d1 # fetch Dest2[15:0] + movs.w (%a0),%d0 # fetch Dest1[15:0] + bra.b CAS2W2_CONT2 +CAS2W2_ENTER: + bra.b ~+16 + +CAS2W2_CONT2: + cmp.w %d0,%d2 # Dest1 - Compare1 + bne.b CAS2W2_NOUPDATE + cmp.w %d1,%d3 # Dest2 - Compare2 + bne.b CAS2W2_NOUPDATE + movs.w %d5,(%a1) # Update2[15:0] -> DEST2 + bra.b CAS2W2_UPDATE + bra.b ~+16 + +CAS2W2_UPDATE: + ror.l &0x8,%d4 # get Update1[15:8] + movs.b %d4,(%a0)+ # Update1[15:8] -> DEST1 + movc %a3,%buscr # assert LOCKE* + rol.l &0x8,%d4 # get Update1[7:0] + bra.b CAS2W2_UPDATE2 + bra.b ~+16 + +CAS2W2_UPDATE2: + movs.b %d4,(%a0) # Update1[7:0] -> DEST1+0x1 + movc %a4,%buscr # unlock the bus + bra.w cas2w_update_done + nop + bra.b ~+16 + +CAS2W2_NOUPDATE: + ror.l &0x8,%d0 # get Dest1[15:8] + movs.b %d0,(%a0)+ # Dest1[15:8] -> DEST1 + movc %a3,%buscr # assert LOCKE* + rol.l &0x8,%d0 # get Dest1[7:0] + bra.b CAS2W2_NOUPDATE2 + bra.b ~+16 + +CAS2W2_NOUPDATE2: + movs.b %d0,(%a0) # Dest1[7:0] -> DEST1+0x1 + movc %a4,%buscr # unlock the bus + bra.w cas2w_noupdate_done + nop + bra.b ~+16 + +CAS2W2_FILLER: + nop + nop + nop + nop + nop + nop + nop + bra.b CAS2W2_START + +# ###### ## ###### +# # # # # +# # ###### ###### +# # # # # +# ###### # # ###### + +######################################################################### +# XDEF **************************************************************** # +# _isp_cas(): "core" emulation code for the cas instruction # +# # +# XREF **************************************************************** # +# _isp_cas_finish() - only exit point for this emulation code; # +# do clean-up # +# # +# INPUT *************************************************************** # +# *see entry chart below* # +# # +# OUTPUT ************************************************************** # +# *see exit chart below* # +# # +# ALGORITHM *********************************************************** # +# (1) Make several copies of the effective address. # +# (2) Save current SR; Then mask off all maskable interrupts. # +# (3) Save current DFC/SFC (ASSUMED TO BE EQUAL!!!); Then set # +# SFC/DFC according to whether exception occurred in user or # +# supervisor mode. # +# (4) Use "plpaw" instruction to pre-load ATC with effective # +# address page(s). THIS SHOULD NOT FAULT!!! The relevant # +# page(s) should have been made resident prior to entering # +# this routine. # +# (5) Push the operand lines from the cache w/ "cpushl". # +# In the 68040, this was done within the locked region. In # +# the 68060, it is done outside of the locked region. # +# (6) Pre-fetch the core emulation instructions by executing one # +# branch within each physical line (16 bytes) of the code # +# before actually executing the code. # +# (7) Load the BUSCR with the bus lock value. # +# (8) Fetch the source operand. # +# (9) Do the compare. If equal, go to step (12). # +# (10)Unequal. No update occurs. But, we do write the DST op back # +# to itself (as w/ the '040) so we can gracefully unlock # +# the bus (and assert LOCKE*) using BUSCR and the final move. # +# (11)Exit. # +# (12)Write update operand to the DST location. Use BUSCR to # +# assert LOCKE* for the final write operation. # +# (13)Exit. # +# # +# The algorithm is actually implemented slightly differently # +# depending on the size of the operation and the misalignment of the # +# operand. A misaligned operand must be written in aligned chunks or # +# else the BUSCR register control gets confused. # +# # +######################################################################### + +######################################################### +# THIS IS THE STATE OF THE INTEGER REGISTER FILE UPON # +# ENTERING _isp_cas(). # +# # +# D0 = xxxxxxxx # +# D1 = xxxxxxxx # +# D2 = update operand # +# D3 = xxxxxxxx # +# D4 = compare operand # +# D5 = xxxxxxxx # +# D6 = supervisor ('xxxxxxff) or user mode ('xxxxxx00) # +# D7 = longword ('xxxxxxff) or word size ('xxxxxx00) # +# A0 = ADDR # +# A1 = xxxxxxxx # +# A2 = xxxxxxxx # +# A3 = xxxxxxxx # +# A4 = xxxxxxxx # +# A5 = xxxxxxxx # +# A6 = frame pointer # +# A7 = stack pointer # +######################################################### + + global _isp_cas +_isp_cas: + tst.b %d6 # user or supervisor mode? + bne.b cas_super # supervisor +cas_user: + movq.l &0x1,%d0 # load user data fc + bra.b cas_cont +cas_super: + movq.l &0x5,%d0 # load supervisor data fc + +cas_cont: + tst.b %d7 # word or longword? + bne.w casl # longword + +#### +casw: + mov.l %a0,%a1 # make copy for plpaw1 + mov.l %a0,%a2 # make copy for plpaw2 + addq.l &0x1,%a2 # plpaw2 points to end of word + + mov.l %d2,%d3 # d3 = update[7:0] + lsr.w &0x8,%d2 # d2 = update[15:8] + +# mask interrupt levels 0-6. save old mask value. + mov.w %sr,%d7 # save current SR + ori.w &0x0700,%sr # inhibit interrupts + +# load the SFC and DFC with the appropriate mode. + movc %sfc,%d6 # save old SFC/DFC + movc %d0,%sfc # load new sfc + movc %d0,%dfc # load new dfc + +# pre-load the operand ATC. no page faults should occur here because +# _real_lock_page() should have taken care of this. + plpaw (%a1) # load atc for ADDR + plpaw (%a2) # load atc for ADDR+1 + +# push the operand lines from the cache if they exist. + cpushl %dc,(%a1) # push dirty data + cpushl %dc,(%a2) # push dirty data + +# load the BUSCR values. + mov.l &0x80000000,%a1 # assert LOCK* buscr value + mov.l &0xa0000000,%a2 # assert LOCKE* buscr value + mov.l &0x00000000,%a3 # buscr unlock value + +# pre-load the instruction cache for the following algorithm. +# this will minimize the number of cycles that LOCK* will be asserted. + bra.b CASW_ENTER # start pre-loading icache + +# +# D0 = dst operand <- +# D1 = update[15:8] operand +# D2 = update[7:0] operand +# D3 = xxxxxxxx +# D4 = compare[15:0] operand +# D5 = xxxxxxxx +# D6 = old SFC/DFC +# D7 = old SR +# A0 = ADDR +# A1 = bus LOCK* value +# A2 = bus LOCKE* value +# A3 = bus unlock value +# A4 = xxxxxxxx +# A5 = xxxxxxxx +# + align 0x10 +CASW_START: + movc %a1,%buscr # assert LOCK* + movs.w (%a0),%d0 # fetch Dest[15:0] + cmp.w %d0,%d4 # Dest - Compare + bne.b CASW_NOUPDATE + bra.b CASW_UPDATE +CASW_ENTER: + bra.b ~+16 + +CASW_UPDATE: + movs.b %d2,(%a0)+ # Update[15:8] -> DEST + movc %a2,%buscr # assert LOCKE* + movs.b %d3,(%a0) # Update[7:0] -> DEST+0x1 + bra.b CASW_UPDATE2 + bra.b ~+16 + +CASW_UPDATE2: + movc %a3,%buscr # unlock the bus + bra.b casw_update_done + nop + nop + nop + nop + bra.b ~+16 + +CASW_NOUPDATE: + ror.l &0x8,%d0 # get Dest[15:8] + movs.b %d0,(%a0)+ # Dest[15:8] -> DEST + movc %a2,%buscr # assert LOCKE* + rol.l &0x8,%d0 # get Dest[7:0] + bra.b CASW_NOUPDATE2 + bra.b ~+16 + +CASW_NOUPDATE2: + movs.b %d0,(%a0) # Dest[7:0] -> DEST+0x1 + movc %a3,%buscr # unlock the bus + bra.b casw_noupdate_done + nop + nop + bra.b ~+16 + +CASW_FILLER: + nop + nop + nop + nop + nop + nop + nop + bra.b CASW_START + +################################################################# +# THIS MUST BE THE STATE OF THE INTEGER REGISTER FILE UPON # +# CALLING _isp_cas_finish(). # +# # +# D0 = destination[15:0] operand # +# D1 = 'xxxxxx11 -> no reg update; 'xxxxxx00 -> update required # +# D2 = xxxxxxxx # +# D3 = xxxxxxxx # +# D4 = compare[15:0] operand # +# D5 = xxxxxxxx # +# D6 = xxxxxxxx # +# D7 = xxxxxxxx # +# A0 = xxxxxxxx # +# A1 = xxxxxxxx # +# A2 = xxxxxxxx # +# A3 = xxxxxxxx # +# A4 = xxxxxxxx # +# A5 = xxxxxxxx # +# A6 = frame pointer # +# A7 = stack pointer # +################################################################# + +casw_noupdate_done: + +# restore previous SFC/DFC value. + movc %d6,%sfc # restore old SFC + movc %d6,%dfc # restore old DFC + +# restore previous interrupt mask level. + mov.w %d7,%sr # restore old SR + + sf %d1 # indicate no update was done + bra.l _isp_cas_finish + +casw_update_done: + +# restore previous SFC/DFC value. + movc %d6,%sfc # restore old SFC + movc %d6,%dfc # restore old DFC + +# restore previous interrupt mask level. + mov.w %d7,%sr # restore old SR + + st %d1 # indicate update was done + bra.l _isp_cas_finish + +################ + +# there are two possible mis-aligned cases for longword cas. they +# are separated because the final write which asserts LOCKE* must +# be an aligned write. +casl: + mov.l %a0,%a1 # make copy for plpaw1 + mov.l %a0,%a2 # make copy for plpaw2 + addq.l &0x3,%a2 # plpaw2 points to end of longword + + mov.l %a0,%d1 # byte or word misaligned? + btst &0x0,%d1 + bne.w casl2 # byte misaligned + + mov.l %d2,%d3 # d3 = update[15:0] + swap %d2 # d2 = update[31:16] + +# mask interrupts levels 0-6. save old mask value. + mov.w %sr,%d7 # save current SR + ori.w &0x0700,%sr # inhibit interrupts + +# load the SFC and DFC with the appropriate mode. + movc %sfc,%d6 # save old SFC/DFC + movc %d0,%sfc # load new sfc + movc %d0,%dfc # load new dfc + +# pre-load the operand ATC. no page faults should occur here because +# _real_lock_page() should have taken care of this. + plpaw (%a1) # load atc for ADDR + plpaw (%a2) # load atc for ADDR+3 + +# push the operand lines from the cache if they exist. + cpushl %dc,(%a1) # push dirty data + cpushl %dc,(%a2) # push dirty data + +# load the BUSCR values. + mov.l &0x80000000,%a1 # assert LOCK* buscr value + mov.l &0xa0000000,%a2 # assert LOCKE* buscr value + mov.l &0x00000000,%a3 # buscr unlock value + + bra.b CASL_ENTER # start pre-loading icache + +# +# D0 = dst operand <- +# D1 = xxxxxxxx +# D2 = update[31:16] operand +# D3 = update[15:0] operand +# D4 = compare[31:0] operand +# D5 = xxxxxxxx +# D6 = old SFC/DFC +# D7 = old SR +# A0 = ADDR +# A1 = bus LOCK* value +# A2 = bus LOCKE* value +# A3 = bus unlock value +# A4 = xxxxxxxx +# A5 = xxxxxxxx +# + align 0x10 +CASL_START: + movc %a1,%buscr # assert LOCK* + movs.l (%a0),%d0 # fetch Dest[31:0] + cmp.l %d0,%d4 # Dest - Compare + bne.b CASL_NOUPDATE + bra.b CASL_UPDATE +CASL_ENTER: + bra.b ~+16 + +CASL_UPDATE: + movs.w %d2,(%a0)+ # Update[31:16] -> DEST + movc %a2,%buscr # assert LOCKE* + movs.w %d3,(%a0) # Update[15:0] -> DEST+0x2 + bra.b CASL_UPDATE2 + bra.b ~+16 + +CASL_UPDATE2: + movc %a3,%buscr # unlock the bus + bra.b casl_update_done + nop + nop + nop + nop + bra.b ~+16 + +CASL_NOUPDATE: + swap %d0 # get Dest[31:16] + movs.w %d0,(%a0)+ # Dest[31:16] -> DEST + swap %d0 # get Dest[15:0] + movc %a2,%buscr # assert LOCKE* + bra.b CASL_NOUPDATE2 + bra.b ~+16 + +CASL_NOUPDATE2: + movs.w %d0,(%a0) # Dest[15:0] -> DEST+0x2 + movc %a3,%buscr # unlock the bus + bra.b casl_noupdate_done + nop + nop + bra.b ~+16 + +CASL_FILLER: + nop + nop + nop + nop + nop + nop + nop + bra.b CASL_START + +################################################################# +# THIS MUST BE THE STATE OF THE INTEGER REGISTER FILE UPON # +# CALLING _isp_cas_finish(). # +# # +# D0 = destination[31:0] operand # +# D1 = 'xxxxxx11 -> no reg update; 'xxxxxx00 -> update required # +# D2 = xxxxxxxx # +# D3 = xxxxxxxx # +# D4 = compare[31:0] operand # +# D5 = xxxxxxxx # +# D6 = xxxxxxxx # +# D7 = xxxxxxxx # +# A0 = xxxxxxxx # +# A1 = xxxxxxxx # +# A2 = xxxxxxxx # +# A3 = xxxxxxxx # +# A4 = xxxxxxxx # +# A5 = xxxxxxxx # +# A6 = frame pointer # +# A7 = stack pointer # +################################################################# + +casl_noupdate_done: + +# restore previous SFC/DFC value. + movc %d6,%sfc # restore old SFC + movc %d6,%dfc # restore old DFC + +# restore previous interrupt mask level. + mov.w %d7,%sr # restore old SR + + sf %d1 # indicate no update was done + bra.l _isp_cas_finish + +casl_update_done: + +# restore previous SFC/DFC value. + movc %d6,%sfc # restore old SFC + movc %d6,%dfc # restore old DFC + +# restore previous interrupts mask level. + mov.w %d7,%sr # restore old SR + + st %d1 # indicate update was done + bra.l _isp_cas_finish + +####################################### +casl2: + mov.l %d2,%d5 # d5 = Update[7:0] + lsr.l &0x8,%d2 + mov.l %d2,%d3 # d3 = Update[23:8] + swap %d2 # d2 = Update[31:24] + +# mask interrupts levels 0-6. save old mask value. + mov.w %sr,%d7 # save current SR + ori.w &0x0700,%sr # inhibit interrupts + +# load the SFC and DFC with the appropriate mode. + movc %sfc,%d6 # save old SFC/DFC + movc %d0,%sfc # load new sfc + movc %d0,%dfc # load new dfc + +# pre-load the operand ATC. no page faults should occur here because +# _real_lock_page() should have taken care of this already. + plpaw (%a1) # load atc for ADDR + plpaw (%a2) # load atc for ADDR+3 + +# puch the operand lines from the cache if they exist. + cpushl %dc,(%a1) # push dirty data + cpushl %dc,(%a2) # push dirty data + +# load the BUSCR values. + mov.l &0x80000000,%a1 # assert LOCK* buscr value + mov.l &0xa0000000,%a2 # assert LOCKE* buscr value + mov.l &0x00000000,%a3 # buscr unlock value + +# pre-load the instruction cache for the following algorithm. +# this will minimize the number of cycles that LOCK* will be asserted. + bra.b CASL2_ENTER # start pre-loading icache + +# +# D0 = dst operand <- +# D1 = xxxxxxxx +# D2 = update[31:24] operand +# D3 = update[23:8] operand +# D4 = compare[31:0] operand +# D5 = update[7:0] operand +# D6 = old SFC/DFC +# D7 = old SR +# A0 = ADDR +# A1 = bus LOCK* value +# A2 = bus LOCKE* value +# A3 = bus unlock value +# A4 = xxxxxxxx +# A5 = xxxxxxxx +# + align 0x10 +CASL2_START: + movc %a1,%buscr # assert LOCK* + movs.l (%a0),%d0 # fetch Dest[31:0] + cmp.l %d0,%d4 # Dest - Compare + bne.b CASL2_NOUPDATE + bra.b CASL2_UPDATE +CASL2_ENTER: + bra.b ~+16 + +CASL2_UPDATE: + movs.b %d2,(%a0)+ # Update[31:24] -> DEST + movs.w %d3,(%a0)+ # Update[23:8] -> DEST+0x1 + movc %a2,%buscr # assert LOCKE* + bra.b CASL2_UPDATE2 + bra.b ~+16 + +CASL2_UPDATE2: + movs.b %d5,(%a0) # Update[7:0] -> DEST+0x3 + movc %a3,%buscr # unlock the bus + bra.w casl_update_done + nop + bra.b ~+16 + +CASL2_NOUPDATE: + rol.l &0x8,%d0 # get Dest[31:24] + movs.b %d0,(%a0)+ # Dest[31:24] -> DEST + swap %d0 # get Dest[23:8] + movs.w %d0,(%a0)+ # Dest[23:8] -> DEST+0x1 + bra.b CASL2_NOUPDATE2 + bra.b ~+16 + +CASL2_NOUPDATE2: + rol.l &0x8,%d0 # get Dest[7:0] + movc %a2,%buscr # assert LOCKE* + movs.b %d0,(%a0) # Dest[7:0] -> DEST+0x3 + bra.b CASL2_NOUPDATE3 + nop + bra.b ~+16 + +CASL2_NOUPDATE3: + movc %a3,%buscr # unlock the bus + bra.w casl_noupdate_done + nop + nop + nop + bra.b ~+16 + +CASL2_FILLER: + nop + nop + nop + nop + nop + nop + nop + bra.b CASL2_START + +#### +#### +# end label used by _isp_cas_inrange() + global _CASHI +_CASHI: |