diff options
Diffstat (limited to 'arch/mips/ath25/ar5312.c')
-rw-r--r-- | arch/mips/ath25/ar5312.c | 391 |
1 files changed, 391 insertions, 0 deletions
diff --git a/arch/mips/ath25/ar5312.c b/arch/mips/ath25/ar5312.c new file mode 100644 index 000000000..23c879f4b --- /dev/null +++ b/arch/mips/ath25/ar5312.c @@ -0,0 +1,391 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. + * Copyright (C) 2006 FON Technology, SL. + * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> + * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org> + * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com> + */ + +/* + * Platform devices for Atheros AR5312 SoCs + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/bitops.h> +#include <linux/irqdomain.h> +#include <linux/interrupt.h> +#include <linux/memblock.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/reboot.h> +#include <asm/bootinfo.h> +#include <asm/reboot.h> +#include <asm/time.h> + +#include <ath25_platform.h> + +#include "devices.h" +#include "ar5312.h" +#include "ar5312_regs.h" + +static void __iomem *ar5312_rst_base; +static struct irq_domain *ar5312_misc_irq_domain; + +static inline u32 ar5312_rst_reg_read(u32 reg) +{ + return __raw_readl(ar5312_rst_base + reg); +} + +static inline void ar5312_rst_reg_write(u32 reg, u32 val) +{ + __raw_writel(val, ar5312_rst_base + reg); +} + +static inline void ar5312_rst_reg_mask(u32 reg, u32 mask, u32 val) +{ + u32 ret = ar5312_rst_reg_read(reg); + + ret &= ~mask; + ret |= val; + ar5312_rst_reg_write(reg, ret); +} + +static irqreturn_t ar5312_ahb_err_handler(int cpl, void *dev_id) +{ + u32 proc1 = ar5312_rst_reg_read(AR5312_PROC1); + u32 proc_addr = ar5312_rst_reg_read(AR5312_PROCADDR); /* clears error */ + u32 dma1 = ar5312_rst_reg_read(AR5312_DMA1); + u32 dma_addr = ar5312_rst_reg_read(AR5312_DMAADDR); /* clears error */ + + pr_emerg("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n", + proc_addr, proc1, dma_addr, dma1); + + machine_restart("AHB error"); /* Catastrophic failure */ + return IRQ_HANDLED; +} + +static void ar5312_misc_irq_handler(struct irq_desc *desc) +{ + u32 pending = ar5312_rst_reg_read(AR5312_ISR) & + ar5312_rst_reg_read(AR5312_IMR); + unsigned nr, misc_irq = 0; + + if (pending) { + struct irq_domain *domain = irq_desc_get_handler_data(desc); + + nr = __ffs(pending); + misc_irq = irq_find_mapping(domain, nr); + } + + if (misc_irq) { + generic_handle_irq(misc_irq); + if (nr == AR5312_MISC_IRQ_TIMER) + ar5312_rst_reg_read(AR5312_TIMER); + } else { + spurious_interrupt(); + } +} + +/* Enable the specified AR5312_MISC_IRQ interrupt */ +static void ar5312_misc_irq_unmask(struct irq_data *d) +{ + ar5312_rst_reg_mask(AR5312_IMR, 0, BIT(d->hwirq)); +} + +/* Disable the specified AR5312_MISC_IRQ interrupt */ +static void ar5312_misc_irq_mask(struct irq_data *d) +{ + ar5312_rst_reg_mask(AR5312_IMR, BIT(d->hwirq), 0); + ar5312_rst_reg_read(AR5312_IMR); /* flush write buffer */ +} + +static struct irq_chip ar5312_misc_irq_chip = { + .name = "ar5312-misc", + .irq_unmask = ar5312_misc_irq_unmask, + .irq_mask = ar5312_misc_irq_mask, +}; + +static int ar5312_misc_irq_map(struct irq_domain *d, unsigned irq, + irq_hw_number_t hw) +{ + irq_set_chip_and_handler(irq, &ar5312_misc_irq_chip, handle_level_irq); + return 0; +} + +static struct irq_domain_ops ar5312_misc_irq_domain_ops = { + .map = ar5312_misc_irq_map, +}; + +static void ar5312_irq_dispatch(void) +{ + u32 pending = read_c0_status() & read_c0_cause(); + + if (pending & CAUSEF_IP2) + do_IRQ(AR5312_IRQ_WLAN0); + else if (pending & CAUSEF_IP5) + do_IRQ(AR5312_IRQ_WLAN1); + else if (pending & CAUSEF_IP6) + do_IRQ(AR5312_IRQ_MISC); + else if (pending & CAUSEF_IP7) + do_IRQ(ATH25_IRQ_CPU_CLOCK); + else + spurious_interrupt(); +} + +void __init ar5312_arch_init_irq(void) +{ + struct irq_domain *domain; + unsigned irq; + + ath25_irq_dispatch = ar5312_irq_dispatch; + + domain = irq_domain_add_linear(NULL, AR5312_MISC_IRQ_COUNT, + &ar5312_misc_irq_domain_ops, NULL); + if (!domain) + panic("Failed to add IRQ domain"); + + irq = irq_create_mapping(domain, AR5312_MISC_IRQ_AHB_PROC); + if (request_irq(irq, ar5312_ahb_err_handler, 0, "ar5312-ahb-error", + NULL)) + pr_err("Failed to register ar5312-ahb-error interrupt\n"); + + irq_set_chained_handler_and_data(AR5312_IRQ_MISC, + ar5312_misc_irq_handler, domain); + + ar5312_misc_irq_domain = domain; +} + +static struct physmap_flash_data ar5312_flash_data = { + .width = 2, +}; + +static struct resource ar5312_flash_resource = { + .start = AR5312_FLASH_BASE, + .end = AR5312_FLASH_BASE + AR5312_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ar5312_physmap_flash = { + .name = "physmap-flash", + .id = 0, + .dev.platform_data = &ar5312_flash_data, + .resource = &ar5312_flash_resource, + .num_resources = 1, +}; + +static void __init ar5312_flash_init(void) +{ + void __iomem *flashctl_base; + u32 ctl; + + flashctl_base = ioremap(AR5312_FLASHCTL_BASE, + AR5312_FLASHCTL_SIZE); + + ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL0); + ctl &= AR5312_FLASHCTL_MW; + + /* fixup flash width */ + switch (ctl) { + case AR5312_FLASHCTL_MW16: + ar5312_flash_data.width = 2; + break; + case AR5312_FLASHCTL_MW8: + default: + ar5312_flash_data.width = 1; + break; + } + + /* + * Configure flash bank 0. + * Assume 8M window size. Flash will be aliased if it's smaller + */ + ctl |= AR5312_FLASHCTL_E | AR5312_FLASHCTL_AC_8M | AR5312_FLASHCTL_RBLE; + ctl |= 0x01 << AR5312_FLASHCTL_IDCY_S; + ctl |= 0x07 << AR5312_FLASHCTL_WST1_S; + ctl |= 0x07 << AR5312_FLASHCTL_WST2_S; + __raw_writel(ctl, flashctl_base + AR5312_FLASHCTL0); + + /* Disable other flash banks */ + ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL1); + ctl &= ~(AR5312_FLASHCTL_E | AR5312_FLASHCTL_AC); + __raw_writel(ctl, flashctl_base + AR5312_FLASHCTL1); + ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL2); + ctl &= ~(AR5312_FLASHCTL_E | AR5312_FLASHCTL_AC); + __raw_writel(ctl, flashctl_base + AR5312_FLASHCTL2); + + iounmap(flashctl_base); +} + +void __init ar5312_init_devices(void) +{ + struct ath25_boarddata *config; + + ar5312_flash_init(); + + /* Locate board/radio config data */ + ath25_find_config(AR5312_FLASH_BASE, AR5312_FLASH_SIZE); + config = ath25_board.config; + + /* AR2313 has CPU minor rev. 10 */ + if ((current_cpu_data.processor_id & 0xff) == 0x0a) + ath25_soc = ATH25_SOC_AR2313; + + /* AR2312 shares the same Silicon ID as AR5312 */ + else if (config->flags & BD_ISCASPER) + ath25_soc = ATH25_SOC_AR2312; + + /* Everything else is probably AR5312 or compatible */ + else + ath25_soc = ATH25_SOC_AR5312; + + platform_device_register(&ar5312_physmap_flash); + + switch (ath25_soc) { + case ATH25_SOC_AR5312: + if (!ath25_board.radio) + return; + + if (!(config->flags & BD_WLAN0)) + break; + + ath25_add_wmac(0, AR5312_WLAN0_BASE, AR5312_IRQ_WLAN0); + break; + case ATH25_SOC_AR2312: + case ATH25_SOC_AR2313: + if (!ath25_board.radio) + return; + break; + default: + break; + } + + if (config->flags & BD_WLAN1) + ath25_add_wmac(1, AR5312_WLAN1_BASE, AR5312_IRQ_WLAN1); +} + +static void ar5312_restart(char *command) +{ + /* reset the system */ + local_irq_disable(); + while (1) + ar5312_rst_reg_write(AR5312_RESET, AR5312_RESET_SYSTEM); +} + +/* + * This table is indexed by bits 5..4 of the CLOCKCTL1 register + * to determine the predevisor value. + */ +static unsigned clockctl1_predivide_table[4] __initdata = { 1, 2, 4, 5 }; + +static unsigned __init ar5312_cpu_frequency(void) +{ + u32 scratch, devid, clock_ctl1; + u32 predivide_mask, multiplier_mask, doubler_mask; + unsigned predivide_shift, multiplier_shift; + unsigned predivide_select, predivisor, multiplier; + + /* Trust the bootrom's idea of cpu frequency. */ + scratch = ar5312_rst_reg_read(AR5312_SCRATCH); + if (scratch) + return scratch; + + devid = ar5312_rst_reg_read(AR5312_REV); + devid = (devid & AR5312_REV_MAJ) >> AR5312_REV_MAJ_S; + if (devid == AR5312_REV_MAJ_AR2313) { + predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK; + predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT; + multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK; + multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT; + doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK; + } else { /* AR5312 and AR2312 */ + predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK; + predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT; + multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK; + multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT; + doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK; + } + + /* + * Clocking is derived from a fixed 40MHz input clock. + * + * cpu_freq = input_clock * MULT (where MULT is PLL multiplier) + * sys_freq = cpu_freq / 4 (used for APB clock, serial, + * flash, Timer, Watchdog Timer) + * + * cnt_freq = cpu_freq / 2 (use for CPU count/compare) + * + * So, for example, with a PLL multiplier of 5, we have + * + * cpu_freq = 200MHz + * sys_freq = 50MHz + * cnt_freq = 100MHz + * + * We compute the CPU frequency, based on PLL settings. + */ + + clock_ctl1 = ar5312_rst_reg_read(AR5312_CLOCKCTL1); + predivide_select = (clock_ctl1 & predivide_mask) >> predivide_shift; + predivisor = clockctl1_predivide_table[predivide_select]; + multiplier = (clock_ctl1 & multiplier_mask) >> multiplier_shift; + + if (clock_ctl1 & doubler_mask) + multiplier <<= 1; + + return (40000000 / predivisor) * multiplier; +} + +static inline unsigned ar5312_sys_frequency(void) +{ + return ar5312_cpu_frequency() / 4; +} + +void __init ar5312_plat_time_init(void) +{ + mips_hpt_frequency = ar5312_cpu_frequency() / 2; +} + +void __init ar5312_plat_mem_setup(void) +{ + void __iomem *sdram_base; + u32 memsize, memcfg, bank0_ac, bank1_ac; + u32 devid; + + /* Detect memory size */ + sdram_base = ioremap(AR5312_SDRAMCTL_BASE, + AR5312_SDRAMCTL_SIZE); + memcfg = __raw_readl(sdram_base + AR5312_MEM_CFG1); + bank0_ac = ATH25_REG_MS(memcfg, AR5312_MEM_CFG1_AC0); + bank1_ac = ATH25_REG_MS(memcfg, AR5312_MEM_CFG1_AC1); + memsize = (bank0_ac ? (1 << (bank0_ac + 1)) : 0) + + (bank1_ac ? (1 << (bank1_ac + 1)) : 0); + memsize <<= 20; + memblock_add(0, memsize); + iounmap(sdram_base); + + ar5312_rst_base = ioremap(AR5312_RST_BASE, AR5312_RST_SIZE); + + devid = ar5312_rst_reg_read(AR5312_REV); + devid >>= AR5312_REV_WMAC_MIN_S; + devid &= AR5312_REV_CHIP; + ath25_board.devid = (u16)devid; + + /* Clear any lingering AHB errors */ + ar5312_rst_reg_read(AR5312_PROCADDR); + ar5312_rst_reg_read(AR5312_DMAADDR); + ar5312_rst_reg_write(AR5312_WDT_CTRL, AR5312_WDT_CTRL_IGNORE); + + _machine_restart = ar5312_restart; +} + +void __init ar5312_arch_init(void) +{ + unsigned irq = irq_create_mapping(ar5312_misc_irq_domain, + AR5312_MISC_IRQ_UART0); + + ath25_serial_setup(AR5312_UART0_BASE, irq, ar5312_sys_frequency()); +} |