diff options
Diffstat (limited to 'arch/mips/boot/dts/ingenic/qi_lb60.dts')
-rw-r--r-- | arch/mips/boot/dts/ingenic/qi_lb60.dts | 363 |
1 files changed, 363 insertions, 0 deletions
diff --git a/arch/mips/boot/dts/ingenic/qi_lb60.dts b/arch/mips/boot/dts/ingenic/qi_lb60.dts new file mode 100644 index 000000000..ba0218971 --- /dev/null +++ b/arch/mips/boot/dts/ingenic/qi_lb60.dts @@ -0,0 +1,363 @@ +// SPDX-License-Identifier: GPL-2.0 +/dts-v1/; + +#include "jz4740.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/iio/adc/ingenic,adc.h> +#include <dt-bindings/clock/ingenic,tcu.h> +#include <dt-bindings/input/input.h> + +#define KEY_QI_QI KEY_F13 +#define KEY_QI_UPRED KEY_RIGHTALT +#define KEY_QI_VOLUP KEY_VOLUMEUP +#define KEY_QI_VOLDOWN KEY_VOLUMEDOWN +#define KEY_QI_FN KEY_LEFTCTRL + +/ { + compatible = "qi,lb60", "ingenic,jz4740"; + model = "Ben Nanonote"; + + memory { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + chosen { + stdout-path = &uart0; + }; + + vcc: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vcc"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + mmc_power: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "mmc_vcc"; + gpio = <&gpd 2 0>; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + amp_supply: regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "amp_supply"; + gpio = <&gpd 4 0>; + enable-active-high; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + amp: analog-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpb 29 GPIO_ACTIVE_HIGH>; + VCC-supply = <&_supply>; + }; + + sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "QI LB60"; + simple-audio-card,format = "i2s"; + + simple-audio-card,widgets = + "Speaker", "Speaker", + "Microphone", "Mic"; + simple-audio-card,routing = + "MIC", "Mic", + "Speaker", "OUTL", + "Speaker", "OUTR", + "INL", "LOUT", + "INR", "ROUT"; + + simple-audio-card,aux-devs = <&>; + + simple-audio-card,bitclock-master = <&dai_codec>; + simple-audio-card,frame-master = <&dai_codec>; + + dai_cpu: simple-audio-card,cpu { + sound-dai = <&aic>; + }; + + dai_codec: simple-audio-card,codec { + sound-dai = <&codec>; + }; + }; + + keys { + compatible = "gpio-keys"; + + key { + label = "Power"; + wakeup-source; + linux,code = <KEY_POWER>; + gpios = <&gpd 29 GPIO_ACTIVE_LOW>; + }; + }; + + keyboard { + compatible = "gpio-matrix-keypad"; + + col-scan-delay-us = <10>; + debounce-delay-ms = <10>; + wakeup-source; + + row-gpios = <&gpd 18 0>, <&gpd 19 0>, <&gpd 20 0>, <&gpd 21 0>, + <&gpd 22 0>, <&gpd 23 0>, <&gpd 24 0>, <&gpd 26 0>; + col-gpios = <&gpc 10 0>, <&gpc 11 0>, <&gpc 12 0>, <&gpc 13 0>, + <&gpc 14 0>, <&gpc 15 0>, <&gpc 16 0>, <&gpc 17 0>; + gpio-activelow; + + linux,keymap = + <MATRIX_KEY(0, 0, KEY_F1)>, /* S2 */ + <MATRIX_KEY(0, 1, KEY_F2)>, /* S3 */ + <MATRIX_KEY(0, 2, KEY_F3)>, /* S4 */ + <MATRIX_KEY(0, 3, KEY_F4)>, /* S5 */ + <MATRIX_KEY(0, 4, KEY_F5)>, /* S6 */ + <MATRIX_KEY(0, 5, KEY_F6)>, /* S7 */ + <MATRIX_KEY(0, 6, KEY_F7)>, /* S8 */ + + <MATRIX_KEY(1, 0, KEY_Q)>, /* S10 */ + <MATRIX_KEY(1, 1, KEY_W)>, /* S11 */ + <MATRIX_KEY(1, 2, KEY_E)>, /* S12 */ + <MATRIX_KEY(1, 3, KEY_R)>, /* S13 */ + <MATRIX_KEY(1, 4, KEY_T)>, /* S14 */ + <MATRIX_KEY(1, 5, KEY_Y)>, /* S15 */ + <MATRIX_KEY(1, 6, KEY_U)>, /* S16 */ + <MATRIX_KEY(1, 7, KEY_I)>, /* S17 */ + <MATRIX_KEY(2, 0, KEY_A)>, /* S18 */ + <MATRIX_KEY(2, 1, KEY_S)>, /* S19 */ + <MATRIX_KEY(2, 2, KEY_D)>, /* S20 */ + <MATRIX_KEY(2, 3, KEY_F)>, /* S21 */ + <MATRIX_KEY(2, 4, KEY_G)>, /* S22 */ + <MATRIX_KEY(2, 5, KEY_H)>, /* S23 */ + <MATRIX_KEY(2, 6, KEY_J)>, /* S24 */ + <MATRIX_KEY(2, 7, KEY_K)>, /* S25 */ + <MATRIX_KEY(3, 0, KEY_ESC)>, /* S26 */ + <MATRIX_KEY(3, 1, KEY_Z)>, /* S27 */ + <MATRIX_KEY(3, 2, KEY_X)>, /* S28 */ + <MATRIX_KEY(3, 3, KEY_C)>, /* S29 */ + <MATRIX_KEY(3, 4, KEY_V)>, /* S30 */ + <MATRIX_KEY(3, 5, KEY_B)>, /* S31 */ + <MATRIX_KEY(3, 6, KEY_N)>, /* S32 */ + <MATRIX_KEY(3, 7, KEY_M)>, /* S33 */ + <MATRIX_KEY(4, 0, KEY_TAB)>, /* S34 */ + <MATRIX_KEY(4, 1, KEY_CAPSLOCK)>, /* S35 */ + <MATRIX_KEY(4, 2, KEY_BACKSLASH)>, /* S36 */ + <MATRIX_KEY(4, 3, KEY_APOSTROPHE)>, /* S37 */ + <MATRIX_KEY(4, 4, KEY_COMMA)>, /* S38 */ + <MATRIX_KEY(4, 5, KEY_DOT)>, /* S39 */ + <MATRIX_KEY(4, 6, KEY_SLASH)>, /* S40 */ + <MATRIX_KEY(4, 7, KEY_UP)>, /* S41 */ + <MATRIX_KEY(5, 0, KEY_O)>, /* S42 */ + <MATRIX_KEY(5, 1, KEY_L)>, /* S43 */ + <MATRIX_KEY(5, 2, KEY_EQUAL)>, /* S44 */ + <MATRIX_KEY(5, 3, KEY_QI_UPRED)>, /* S45 */ + <MATRIX_KEY(5, 4, KEY_SPACE)>, /* S46 */ + <MATRIX_KEY(5, 5, KEY_QI_QI)>, /* S47 */ + <MATRIX_KEY(5, 6, KEY_RIGHTCTRL)>, /* S48 */ + <MATRIX_KEY(5, 7, KEY_LEFT)>, /* S49 */ + <MATRIX_KEY(6, 0, KEY_F8)>, /* S50 */ + <MATRIX_KEY(6, 1, KEY_P)>, /* S51 */ + <MATRIX_KEY(6, 2, KEY_BACKSPACE)>,/* S52 */ + <MATRIX_KEY(6, 3, KEY_ENTER)>, /* S53 */ + <MATRIX_KEY(6, 4, KEY_QI_VOLUP)>, /* S54 */ + <MATRIX_KEY(6, 5, KEY_QI_VOLDOWN)>, /* S55 */ + <MATRIX_KEY(6, 6, KEY_DOWN)>, /* S56 */ + <MATRIX_KEY(6, 7, KEY_RIGHT)>, /* S57 */ + + <MATRIX_KEY(7, 0, KEY_LEFTSHIFT)>, /* S58 */ + <MATRIX_KEY(7, 1, KEY_LEFTALT)>, /* S59 */ + <MATRIX_KEY(7, 2, KEY_QI_FN)>; /* S60 */ + }; + + spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sck-gpios = <&gpc 23 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpc 22 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpc 21 GPIO_ACTIVE_LOW>; + num-chipselects = <1>; + }; + + usb_charger: charger { + compatible = "gpio-charger"; + charger-type = "usb-sdp"; + gpios = <&gpd 28 GPIO_ACTIVE_LOW>; + status-gpios = <&gpc 27 GPIO_ACTIVE_LOW>; + }; + + simple_battery: battery { + compatible = "simple-battery"; + voltage-min-design-microvolt = <3600000>; + voltage-max-design-microvolt = <4200000>; + }; + + pmu { + compatible = "ingenic,jz4740-battery"; + io-channels = <&adc INGENIC_ADC_BATTERY>; + io-channel-names = "battery"; + power-supplies = <&usb_charger>; + monitored-battery = <&simple_battery>; + }; + + hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc INGENIC_ADC_AUX>; + }; + + panel: panel { + compatible = "giantplus,gpm940b0"; + + power-supply = <&vcc>; + + port { + panel_input: endpoint { + remote-endpoint = <&panel_output>; + }; + }; + }; + + usb_phy: usb-phy { + compatible = "usb-nop-xceiv"; + #phy-cells = <0>; + + vcc-supply = <&vcc>; + }; +}; + +&ext { + clock-frequency = <12000000>; +}; + +&rtc_dev { + system-power-controller; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pins_uart0>; +}; + +&uart1 { + status = "disabled"; +}; + +&nemc { + nandc: nand-controller@1 { + compatible = "ingenic,jz4740-nand"; + reg = <1 0 0x4000000>; + + #address-cells = <1>; + #size-cells = <0>; + + ecc-engine = <&ecc>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_nemc>; + + rb-gpios = <&gpc 30 GPIO_ACTIVE_HIGH>; + + nand@1 { + reg = <1>; + + nand-ecc-step-size = <512>; + nand-ecc-strength = <4>; + nand-ecc-mode = "hw"; + nand-is-boot-medium; + nand-on-flash-bbt; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "boot"; + reg = <0x0 0x400000>; + }; + + partition@400000 { + label = "kernel"; + reg = <0x400000 0x400000>; + }; + + partition@800000 { + label = "rootfs"; + reg = <0x800000 0x0>; + }; + }; + }; + }; +}; + +&lcd { + pinctrl-names = "default"; + pinctrl-0 = <&pins_lcd>; + + port { + panel_output: endpoint { + remote-endpoint = <&panel_input>; + }; + }; +}; + +&udc { + phys = <&usb_phy>; +}; + +&pinctrl { + pins_lcd: lcd { + function = "lcd"; + groups = "lcd-8bit"; + }; + + pins_nemc: nemc { + function = "nand"; + groups = "nand-fre-fwe", "nand-cs1"; + }; + + pins_uart0: uart0 { + function = "uart0"; + groups = "uart0-data"; + bias-disable; + }; + + pins_mmc: mmc { + mmc { + function = "mmc"; + groups = "mmc-1bit", "mmc-4bit"; + bias-disable; + }; + + mmc-gpios { + pins = "PD0", "PD2"; + bias-disable; + }; + }; +}; + +&mmc { + bus-width = <4>; + max-frequency = <24000000>; + cd-gpios = <&gpd 0 GPIO_ACTIVE_HIGH>; + vmmc-supply = <&mmc_power>; + + pinctrl-names = "default"; + pinctrl-0 = <&pins_mmc>; +}; + +&tcu { + /* 750 kHz for the system timer and clocksource */ + assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>; + assigned-clock-rates = <750000>, <750000>; +}; |