1 files changed, 265 insertions, 0 deletions
diff --git a/arch/mips/lantiq/falcon/sysctrl.c b/arch/mips/lantiq/falcon/sysctrl.c
new file mode 100644
index 000000000..446a25369
--- /dev/null
+++ b/arch/mips/lantiq/falcon/sysctrl.c
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
+ * Copyright (C) 2011 John Crispin <john@phrozen.org>
+ */
+
+#include <linux/ioport.h>
+#include <linux/export.h>
+#include <linux/clkdev.h>
+#include <linux/of_address.h>
+#include <asm/delay.h>
+
+#include <lantiq_soc.h>
+
+#include "../clk.h"
+
+/* infrastructure control register */
+#define SYS1_INFRAC		0x00bc
+/* Configuration fuses for drivers and pll */
+#define STATUS_CONFIG		0x0040
+
+/* GPE frequency selection */
+#define GPPC_OFFSET		24
+#define GPEFREQ_MASK		0x0000C00
+#define GPEFREQ_OFFSET		10
+/* Clock status register */
+#define SYSCTL_CLKS		0x0000
+/* Clock enable register */
+#define SYSCTL_CLKEN		0x0004
+/* Clock clear register */
+#define SYSCTL_CLKCLR		0x0008
+/* Activation Status Register */
+#define SYSCTL_ACTS		0x0020
+/* Activation Register */
+#define SYSCTL_ACT		0x0024
+/* Deactivation Register */
+#define SYSCTL_DEACT		0x0028
+/* reboot Register */
+#define SYSCTL_RBT		0x002c
+/* CPU0 Clock Control Register */
+#define SYS1_CPU0CC		0x0040
+/* HRST_OUT_N Control Register */
+#define SYS1_HRSTOUTC		0x00c0
+/* clock divider bit */
+#define CPU0CC_CPUDIV		0x0001
+
+/* Activation Status Register */
+#define ACTS_ASC0_ACT	0x00001000
+#define ACTS_SSC0	0x00002000
+#define ACTS_ASC1_ACT	0x00000800
+#define ACTS_I2C_ACT	0x00004000
+#define ACTS_P0		0x00010000
+#define ACTS_P1		0x00010000
+#define ACTS_P2		0x00020000
+#define ACTS_P3		0x00020000
+#define ACTS_P4		0x00040000
+#define ACTS_PADCTRL0	0x00100000
+#define ACTS_PADCTRL1	0x00100000
+#define ACTS_PADCTRL2	0x00200000
+#define ACTS_PADCTRL3	0x00200000
+#define ACTS_PADCTRL4	0x00400000
+
+#define sysctl_w32(m, x, y)	ltq_w32((x), sysctl_membase[m] + (y))
+#define sysctl_r32(m, x)	ltq_r32(sysctl_membase[m] + (x))
+#define sysctl_w32_mask(m, clear, set, reg)	\
+		sysctl_w32(m, (sysctl_r32(m, reg) & ~(clear)) | (set), reg)
+
+#define status_w32(x, y)	ltq_w32((x), status_membase + (y))
+#define status_r32(x)		ltq_r32(status_membase + (x))
+
+static void __iomem *sysctl_membase[3], *status_membase;
+void __iomem *ltq_sys1_membase, *ltq_ebu_membase;
+
+void falcon_trigger_hrst(int level)
+{
+	sysctl_w32(SYSCTL_SYS1, level & 1, SYS1_HRSTOUTC);
+}
+
+static inline void sysctl_wait(struct clk *clk,
+		unsigned int test, unsigned int reg)
+{
+	int err = 1000000;
+
+	do {} while (--err && ((sysctl_r32(clk->module, reg)
+					& clk->bits) != test));
+	if (!err)
+		pr_err("module de/activation failed %d %08X %08X %08X\n",
+			clk->module, clk->bits, test,
+			sysctl_r32(clk->module, reg) & clk->bits);
+}
+
+static int sysctl_activate(struct clk *clk)
+{
+	sysctl_w32(clk->module, clk->bits, SYSCTL_CLKEN);
+	sysctl_w32(clk->module, clk->bits, SYSCTL_ACT);
+	sysctl_wait(clk, clk->bits, SYSCTL_ACTS);
+	return 0;
+}
+
+static void sysctl_deactivate(struct clk *clk)
+{
+	sysctl_w32(clk->module, clk->bits, SYSCTL_CLKCLR);
+	sysctl_w32(clk->module, clk->bits, SYSCTL_DEACT);
+	sysctl_wait(clk, 0, SYSCTL_ACTS);
+}
+
+static int sysctl_clken(struct clk *clk)
+{
+	sysctl_w32(clk->module, clk->bits, SYSCTL_CLKEN);
+	sysctl_w32(clk->module, clk->bits, SYSCTL_ACT);
+	sysctl_wait(clk, clk->bits, SYSCTL_CLKS);
+	return 0;
+}
+
+static void sysctl_clkdis(struct clk *clk)
+{
+	sysctl_w32(clk->module, clk->bits, SYSCTL_CLKCLR);
+	sysctl_wait(clk, 0, SYSCTL_CLKS);
+}
+
+static void sysctl_reboot(struct clk *clk)
+{
+	unsigned int act;
+	unsigned int bits;
+
+	act = sysctl_r32(clk->module, SYSCTL_ACT);
+	bits = ~act & clk->bits;
+	if (bits != 0) {
+		sysctl_w32(clk->module, bits, SYSCTL_CLKEN);
+		sysctl_w32(clk->module, bits, SYSCTL_ACT);
+		sysctl_wait(clk, bits, SYSCTL_ACTS);
+	}
+	sysctl_w32(clk->module, act & clk->bits, SYSCTL_RBT);
+	sysctl_wait(clk, clk->bits, SYSCTL_ACTS);
+}
+
+/* enable the ONU core */
+static void falcon_gpe_enable(void)
+{
+	unsigned int freq;
+	unsigned int status;
+
+	/* if if the clock is already enabled */
+	status = sysctl_r32(SYSCTL_SYS1, SYS1_INFRAC);
+	if (status & (1 << (GPPC_OFFSET + 1)))
+		return;
+
+	freq = (status_r32(STATUS_CONFIG) &
+		GPEFREQ_MASK) >>
+		GPEFREQ_OFFSET;
+	if (freq == 0)
+		freq = 1; /* use 625MHz on unfused chip */
+
+	/* apply new frequency */
+	sysctl_w32_mask(SYSCTL_SYS1, 7 << (GPPC_OFFSET + 1),
+		freq << (GPPC_OFFSET + 2) , SYS1_INFRAC);
+	udelay(1);
+
+	/* enable new frequency */
+	sysctl_w32_mask(SYSCTL_SYS1, 0, 1 << (GPPC_OFFSET + 1), SYS1_INFRAC);
+	udelay(1);
+}
+
+static inline void clkdev_add_sys(const char *dev, unsigned int module,
+					unsigned int bits)
+{
+	struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
+
+	if (!clk)
+		return;
+	clk->cl.dev_id = dev;
+	clk->cl.con_id = NULL;
+	clk->cl.clk = clk;
+	clk->module = module;
+	clk->bits = bits;
+	clk->activate = sysctl_activate;
+	clk->deactivate = sysctl_deactivate;
+	clk->enable = sysctl_clken;
+	clk->disable = sysctl_clkdis;
+	clk->reboot = sysctl_reboot;
+	clkdev_add(&clk->cl);
+}
+
+void __init ltq_soc_init(void)
+{
+	struct device_node *np_status =
+		of_find_compatible_node(NULL, NULL, "lantiq,status-falcon");
+	struct device_node *np_ebu =
+		of_find_compatible_node(NULL, NULL, "lantiq,ebu-falcon");
+	struct device_node *np_sys1 =
+		of_find_compatible_node(NULL, NULL, "lantiq,sys1-falcon");
+	struct device_node *np_syseth =
+		of_find_compatible_node(NULL, NULL, "lantiq,syseth-falcon");
+	struct device_node *np_sysgpe =
+		of_find_compatible_node(NULL, NULL, "lantiq,sysgpe-falcon");
+	struct resource res_status, res_ebu, res_sys[3];
+	int i;
+
+	/* check if all the core register ranges are available */
+	if (!np_status || !np_ebu || !np_sys1 || !np_syseth || !np_sysgpe)
+		panic("Failed to load core nodes from devicetree");
+
+	if (of_address_to_resource(np_status, 0, &res_status) ||
+			of_address_to_resource(np_ebu, 0, &res_ebu) ||
+			of_address_to_resource(np_sys1, 0, &res_sys[0]) ||
+			of_address_to_resource(np_syseth, 0, &res_sys[1]) ||
+			of_address_to_resource(np_sysgpe, 0, &res_sys[2]))
+		panic("Failed to get core resources");
+
+	if ((request_mem_region(res_status.start, resource_size(&res_status),
+				res_status.name) < 0) ||
+		(request_mem_region(res_ebu.start, resource_size(&res_ebu),
+				res_ebu.name) < 0) ||
+		(request_mem_region(res_sys[0].start,
+				resource_size(&res_sys[0]),
+				res_sys[0].name) < 0) ||
+		(request_mem_region(res_sys[1].start,
+				resource_size(&res_sys[1]),
+				res_sys[1].name) < 0) ||
+		(request_mem_region(res_sys[2].start,
+				resource_size(&res_sys[2]),
+				res_sys[2].name) < 0))
+		pr_err("Failed to request core resources");
+
+	status_membase = ioremap(res_status.start,
+					resource_size(&res_status));
+	ltq_ebu_membase = ioremap(res_ebu.start,
+					resource_size(&res_ebu));
+
+	if (!status_membase || !ltq_ebu_membase)
+		panic("Failed to remap core resources");
+
+	for (i = 0; i < 3; i++) {
+		sysctl_membase[i] = ioremap(res_sys[i].start,
+						resource_size(&res_sys[i]));
+		if (!sysctl_membase[i])
+			panic("Failed to remap sysctrl resources");
+	}
+	ltq_sys1_membase = sysctl_membase[0];
+
+	falcon_gpe_enable();
+
+	/* get our 3 static rates for cpu, fpi and io clocks */
+	if (ltq_sys1_r32(SYS1_CPU0CC) & CPU0CC_CPUDIV)
+		clkdev_add_static(CLOCK_200M, CLOCK_100M, CLOCK_200M, 0);
+	else
+		clkdev_add_static(CLOCK_400M, CLOCK_100M, CLOCK_200M, 0);
+
+	/* add our clock domains */
+	clkdev_add_sys("1d810000.gpio", SYSCTL_SYSETH, ACTS_P0);
+	clkdev_add_sys("1d810100.gpio", SYSCTL_SYSETH, ACTS_P2);
+	clkdev_add_sys("1e800100.gpio", SYSCTL_SYS1, ACTS_P1);
+	clkdev_add_sys("1e800200.gpio", SYSCTL_SYS1, ACTS_P3);
+	clkdev_add_sys("1e800300.gpio", SYSCTL_SYS1, ACTS_P4);
+	clkdev_add_sys("1db01000.pad", SYSCTL_SYSETH, ACTS_PADCTRL0);
+	clkdev_add_sys("1db02000.pad", SYSCTL_SYSETH, ACTS_PADCTRL2);
+	clkdev_add_sys("1e800400.pad", SYSCTL_SYS1, ACTS_PADCTRL1);
+	clkdev_add_sys("1e800500.pad", SYSCTL_SYS1, ACTS_PADCTRL3);
+	clkdev_add_sys("1e800600.pad", SYSCTL_SYS1, ACTS_PADCTRL4);
+	clkdev_add_sys("1e100b00.serial", SYSCTL_SYS1, ACTS_ASC1_ACT);
+	clkdev_add_sys("1e100c00.serial", SYSCTL_SYS1, ACTS_ASC0_ACT);
+	clkdev_add_sys("1e100d00.spi", SYSCTL_SYS1, ACTS_SSC0);
+	clkdev_add_sys("1e200000.i2c", SYSCTL_SYS1, ACTS_I2C_ACT);
+}