summaryrefslogtreecommitdiffstats
path: root/arch/mips/sibyte/common/sb_tbprof.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/sibyte/common/sb_tbprof.c')
-rw-r--r--arch/mips/sibyte/common/sb_tbprof.c595
1 files changed, 595 insertions, 0 deletions
diff --git a/arch/mips/sibyte/common/sb_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c
new file mode 100644
index 000000000..f80d7a710
--- /dev/null
+++ b/arch/mips/sibyte/common/sb_tbprof.c
@@ -0,0 +1,595 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *
+ * Copyright (C) 2001, 2002, 2003 Broadcom Corporation
+ * Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org>
+ * Copyright (C) 2007 MIPS Technologies, Inc.
+ * written by Ralf Baechle <ralf@linux-mips.org>
+ */
+
+#undef DEBUG
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/vmalloc.h>
+#include <linux/fs.h>
+#include <linux/errno.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+#include <asm/sibyte/sb1250.h>
+
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#include <asm/sibyte/bcm1480_regs.h>
+#include <asm/sibyte/bcm1480_scd.h>
+#include <asm/sibyte/bcm1480_int.h>
+#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
+#include <asm/sibyte/sb1250_regs.h>
+#include <asm/sibyte/sb1250_scd.h>
+#include <asm/sibyte/sb1250_int.h>
+#else
+#error invalid SiByte UART configuration
+#endif
+
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+#undef K_INT_TRACE_FREEZE
+#define K_INT_TRACE_FREEZE K_BCM1480_INT_TRACE_FREEZE
+#undef K_INT_PERF_CNT
+#define K_INT_PERF_CNT K_BCM1480_INT_PERF_CNT
+#endif
+
+#include <linux/uaccess.h>
+
+#define SBPROF_TB_MAJOR 240
+
+typedef u64 tb_sample_t[6*256];
+
+enum open_status {
+ SB_CLOSED,
+ SB_OPENING,
+ SB_OPEN
+};
+
+struct sbprof_tb {
+ wait_queue_head_t tb_sync;
+ wait_queue_head_t tb_read;
+ struct mutex lock;
+ enum open_status open;
+ tb_sample_t *sbprof_tbbuf;
+ int next_tb_sample;
+
+ volatile int tb_enable;
+ volatile int tb_armed;
+
+};
+
+static struct sbprof_tb sbp;
+
+#define MAX_SAMPLE_BYTES (24*1024*1024)
+#define MAX_TBSAMPLE_BYTES (12*1024*1024)
+
+#define MAX_SAMPLES (MAX_SAMPLE_BYTES/sizeof(u_int32_t))
+#define TB_SAMPLE_SIZE (sizeof(tb_sample_t))
+#define MAX_TB_SAMPLES (MAX_TBSAMPLE_BYTES/TB_SAMPLE_SIZE)
+
+/* ioctls */
+#define SBPROF_ZBSTART _IOW('s', 0, int)
+#define SBPROF_ZBSTOP _IOW('s', 1, int)
+#define SBPROF_ZBWAITFULL _IOW('s', 2, int)
+
+/*
+ * Routines for using 40-bit SCD cycle counter
+ *
+ * Client responsible for either handling interrupts or making sure
+ * the cycles counter never saturates, e.g., by doing
+ * zclk_timer_init(0) at least every 2^40 - 1 ZCLKs.
+ */
+
+/*
+ * Configures SCD counter 0 to count ZCLKs starting from val;
+ * Configures SCD counters1,2,3 to count nothing.
+ * Must not be called while gathering ZBbus profiles.
+ */
+
+#define zclk_timer_init(val) \
+ __asm__ __volatile__ (".set push;" \
+ ".set mips64;" \
+ "la $8, 0xb00204c0;" /* SCD perf_cnt_cfg */ \
+ "sd %0, 0x10($8);" /* write val to counter0 */ \
+ "sd %1, 0($8);" /* config counter0 for zclks*/ \
+ ".set pop" \
+ : /* no outputs */ \
+ /* enable, counter0 */ \
+ : /* inputs */ "r"(val), "r" ((1ULL << 33) | 1ULL) \
+ : /* modifies */ "$8" )
+
+
+/* Reads SCD counter 0 and puts result in value
+ unsigned long long val; */
+#define zclk_get(val) \
+ __asm__ __volatile__ (".set push;" \
+ ".set mips64;" \
+ "la $8, 0xb00204c0;" /* SCD perf_cnt_cfg */ \
+ "ld %0, 0x10($8);" /* write val to counter0 */ \
+ ".set pop" \
+ : /* outputs */ "=r"(val) \
+ : /* inputs */ \
+ : /* modifies */ "$8" )
+
+#define DEVNAME "sb_tbprof"
+
+#define TB_FULL (sbp.next_tb_sample == MAX_TB_SAMPLES)
+
+/*
+ * Support for ZBbus sampling using the trace buffer
+ *
+ * We use the SCD performance counter interrupt, caused by a Zclk counter
+ * overflow, to trigger the start of tracing.
+ *
+ * We set the trace buffer to sample everything and freeze on
+ * overflow.
+ *
+ * We map the interrupt for trace_buffer_freeze to handle it on CPU 0.
+ *
+ */
+
+static u64 tb_period;
+
+static void arm_tb(void)
+{
+ u64 scdperfcnt;
+ u64 next = (1ULL << 40) - tb_period;
+ u64 tb_options = M_SCD_TRACE_CFG_FREEZE_FULL;
+
+ /*
+ * Generate an SCD_PERFCNT interrupt in TB_PERIOD Zclks to
+ * trigger start of trace. XXX vary sampling period
+ */
+ __raw_writeq(0, IOADDR(A_SCD_PERF_CNT_1));
+ scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG));
+
+ /*
+ * Unfortunately, in Pass 2 we must clear all counters to knock down
+ * a previous interrupt request. This means that bus profiling
+ * requires ALL of the SCD perf counters.
+ */
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+ __raw_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) |
+ /* keep counters 0,2,3,4,5,6,7 as is */
+ V_SPC_CFG_SRC1(1), /* counter 1 counts cycles */
+ IOADDR(A_BCM1480_SCD_PERF_CNT_CFG0));
+ __raw_writeq(
+ M_SPC_CFG_ENABLE | /* enable counting */
+ M_SPC_CFG_CLEAR | /* clear all counters */
+ V_SPC_CFG_SRC1(1), /* counter 1 counts cycles */
+ IOADDR(A_BCM1480_SCD_PERF_CNT_CFG1));
+#else
+ __raw_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) |
+ /* keep counters 0,2,3 as is */
+ M_SPC_CFG_ENABLE | /* enable counting */
+ M_SPC_CFG_CLEAR | /* clear all counters */
+ V_SPC_CFG_SRC1(1), /* counter 1 counts cycles */
+ IOADDR(A_SCD_PERF_CNT_CFG));
+#endif
+ __raw_writeq(next, IOADDR(A_SCD_PERF_CNT_1));
+ /* Reset the trace buffer */
+ __raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
+#if 0 && defined(M_SCD_TRACE_CFG_FORCECNT)
+ /* XXXKW may want to expose control to the data-collector */
+ tb_options |= M_SCD_TRACE_CFG_FORCECNT;
+#endif
+ __raw_writeq(tb_options, IOADDR(A_SCD_TRACE_CFG));
+ sbp.tb_armed = 1;
+}
+
+static irqreturn_t sbprof_tb_intr(int irq, void *dev_id)
+{
+ int i;
+
+ pr_debug(DEVNAME ": tb_intr\n");
+
+ if (sbp.next_tb_sample < MAX_TB_SAMPLES) {
+ /* XXX should use XKPHYS to make writes bypass L2 */
+ u64 *p = sbp.sbprof_tbbuf[sbp.next_tb_sample++];
+ /* Read out trace */
+ __raw_writeq(M_SCD_TRACE_CFG_START_READ,
+ IOADDR(A_SCD_TRACE_CFG));
+ __asm__ __volatile__ ("sync" : : : "memory");
+ /* Loop runs backwards because bundles are read out in reverse order */
+ for (i = 256 * 6; i > 0; i -= 6) {
+ /* Subscripts decrease to put bundle in the order */
+ /* t0 lo, t0 hi, t1 lo, t1 hi, t2 lo, t2 hi */
+ p[i - 1] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+ /* read t2 hi */
+ p[i - 2] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+ /* read t2 lo */
+ p[i - 3] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+ /* read t1 hi */
+ p[i - 4] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+ /* read t1 lo */
+ p[i - 5] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+ /* read t0 hi */
+ p[i - 6] = __raw_readq(IOADDR(A_SCD_TRACE_READ));
+ /* read t0 lo */
+ }
+ if (!sbp.tb_enable) {
+ pr_debug(DEVNAME ": tb_intr shutdown\n");
+ __raw_writeq(M_SCD_TRACE_CFG_RESET,
+ IOADDR(A_SCD_TRACE_CFG));
+ sbp.tb_armed = 0;
+ wake_up_interruptible(&sbp.tb_sync);
+ } else {
+ /* knock down current interrupt and get another one later */
+ arm_tb();
+ }
+ } else {
+ /* No more trace buffer samples */
+ pr_debug(DEVNAME ": tb_intr full\n");
+ __raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG));
+ sbp.tb_armed = 0;
+ if (!sbp.tb_enable)
+ wake_up_interruptible(&sbp.tb_sync);
+ wake_up_interruptible(&sbp.tb_read);
+ }
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sbprof_pc_intr(int irq, void *dev_id)
+{
+ printk(DEVNAME ": unexpected pc_intr");
+ return IRQ_NONE;
+}
+
+/*
+ * Requires: Already called zclk_timer_init with a value that won't
+ * saturate 40 bits. No subsequent use of SCD performance counters
+ * or trace buffer.
+ */
+
+static int sbprof_zbprof_start(struct file *filp)
+{
+ u64 scdperfcnt;
+ int err;
+
+ if (xchg(&sbp.tb_enable, 1))
+ return -EBUSY;
+
+ pr_debug(DEVNAME ": starting\n");
+
+ sbp.next_tb_sample = 0;
+ filp->f_pos = 0;
+
+ err = request_irq(K_INT_TRACE_FREEZE, sbprof_tb_intr, 0,
+ DEVNAME " trace freeze", &sbp);
+ if (err)
+ return -EBUSY;
+
+ /* Make sure there isn't a perf-cnt interrupt waiting */
+ scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG));
+ /* Disable and clear counters, override SRC_1 */
+ __raw_writeq((scdperfcnt & ~(M_SPC_CFG_SRC1 | M_SPC_CFG_ENABLE)) |
+ M_SPC_CFG_ENABLE | M_SPC_CFG_CLEAR | V_SPC_CFG_SRC1(1),
+ IOADDR(A_SCD_PERF_CNT_CFG));
+
+ /*
+ * We grab this interrupt to prevent others from trying to use
+ * it, even though we don't want to service the interrupts
+ * (they only feed into the trace-on-interrupt mechanism)
+ */
+ if (request_irq(K_INT_PERF_CNT, sbprof_pc_intr, 0, DEVNAME " scd perfcnt", &sbp)) {
+ free_irq(K_INT_TRACE_FREEZE, &sbp);
+ return -EBUSY;
+ }
+
+ /*
+ * I need the core to mask these, but the interrupt mapper to
+ * pass them through. I am exploiting my knowledge that
+ * cp0_status masks out IP[5]. krw
+ */
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+ __raw_writeq(K_BCM1480_INT_MAP_I3,
+ IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_L) +
+ ((K_BCM1480_INT_PERF_CNT & 0x3f) << 3)));
+#else
+ __raw_writeq(K_INT_MAP_I3,
+ IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
+ (K_INT_PERF_CNT << 3)));
+#endif
+
+ /* Initialize address traps */
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_0));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_1));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_2));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_3));
+
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_0));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_1));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_2));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_3));
+
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_0));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_1));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_2));
+ __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3));
+
+ /* Initialize Trace Event 0-7 */
+ /* when interrupt */
+ __raw_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_3));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_4));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_5));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_6));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_7));
+
+ /* Initialize Trace Sequence 0-7 */
+ /* Start on event 0 (interrupt) */
+ __raw_writeq(V_SCD_TRSEQ_FUNC_START | 0x0fff,
+ IOADDR(A_SCD_TRACE_SEQUENCE_0));
+ /* dsamp when d used | asamp when a used */
+ __raw_writeq(M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE |
+ K_SCD_TRSEQ_TRIGGER_ALL,
+ IOADDR(A_SCD_TRACE_SEQUENCE_1));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_2));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_3));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_4));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_5));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_6));
+ __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_7));
+
+ /* Now indicate the PERF_CNT interrupt as a trace-relevant interrupt */
+#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
+ __raw_writeq(1ULL << (K_BCM1480_INT_PERF_CNT & 0x3f),
+ IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_TRACE_L)));
+#else
+ __raw_writeq(1ULL << K_INT_PERF_CNT,
+ IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_TRACE)));
+#endif
+ arm_tb();
+
+ pr_debug(DEVNAME ": done starting\n");
+
+ return 0;
+}
+
+static int sbprof_zbprof_stop(void)
+{
+ int err = 0;
+
+ pr_debug(DEVNAME ": stopping\n");
+
+ if (sbp.tb_enable) {
+ /*
+ * XXXKW there is a window here where the intr handler may run,
+ * see the disable, and do the wake_up before this sleep
+ * happens.
+ */
+ pr_debug(DEVNAME ": wait for disarm\n");
+ err = wait_event_interruptible(sbp.tb_sync, !sbp.tb_armed);
+ pr_debug(DEVNAME ": disarm complete, stat %d\n", err);
+
+ if (err)
+ return err;
+
+ sbp.tb_enable = 0;
+ free_irq(K_INT_TRACE_FREEZE, &sbp);
+ free_irq(K_INT_PERF_CNT, &sbp);
+ }
+
+ pr_debug(DEVNAME ": done stopping\n");
+
+ return err;
+}
+
+static int sbprof_tb_open(struct inode *inode, struct file *filp)
+{
+ int minor;
+
+ minor = iminor(inode);
+ if (minor != 0)
+ return -ENODEV;
+
+ if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED)
+ return -EBUSY;
+
+ memset(&sbp, 0, sizeof(struct sbprof_tb));
+ sbp.sbprof_tbbuf = vzalloc(MAX_TBSAMPLE_BYTES);
+ if (!sbp.sbprof_tbbuf) {
+ sbp.open = SB_CLOSED;
+ wmb();
+ return -ENOMEM;
+ }
+
+ init_waitqueue_head(&sbp.tb_sync);
+ init_waitqueue_head(&sbp.tb_read);
+ mutex_init(&sbp.lock);
+
+ sbp.open = SB_OPEN;
+ wmb();
+
+ return 0;
+}
+
+static int sbprof_tb_release(struct inode *inode, struct file *filp)
+{
+ int minor;
+
+ minor = iminor(inode);
+ if (minor != 0 || sbp.open != SB_CLOSED)
+ return -ENODEV;
+
+ mutex_lock(&sbp.lock);
+
+ if (sbp.tb_armed || sbp.tb_enable)
+ sbprof_zbprof_stop();
+
+ vfree(sbp.sbprof_tbbuf);
+ sbp.open = SB_CLOSED;
+ wmb();
+
+ mutex_unlock(&sbp.lock);
+
+ return 0;
+}
+
+static ssize_t sbprof_tb_read(struct file *filp, char *buf,
+ size_t size, loff_t *offp)
+{
+ int cur_sample, sample_off, cur_count, sample_left;
+ char *src;
+ int count = 0;
+ char *dest = buf;
+ long cur_off = *offp;
+
+ if (!access_ok(buf, size))
+ return -EFAULT;
+
+ mutex_lock(&sbp.lock);
+
+ count = 0;
+ cur_sample = cur_off / TB_SAMPLE_SIZE;
+ sample_off = cur_off % TB_SAMPLE_SIZE;
+ sample_left = TB_SAMPLE_SIZE - sample_off;
+
+ while (size && (cur_sample < sbp.next_tb_sample)) {
+ int err;
+
+ cur_count = size < sample_left ? size : sample_left;
+ src = (char *)(((long)sbp.sbprof_tbbuf[cur_sample])+sample_off);
+ err = __copy_to_user(dest, src, cur_count);
+ if (err) {
+ *offp = cur_off + cur_count - err;
+ mutex_unlock(&sbp.lock);
+ return err;
+ }
+ pr_debug(DEVNAME ": read from sample %d, %d bytes\n",
+ cur_sample, cur_count);
+ size -= cur_count;
+ sample_left -= cur_count;
+ if (!sample_left) {
+ cur_sample++;
+ sample_off = 0;
+ sample_left = TB_SAMPLE_SIZE;
+ } else {
+ sample_off += cur_count;
+ }
+ cur_off += cur_count;
+ dest += cur_count;
+ count += cur_count;
+ }
+ *offp = cur_off;
+ mutex_unlock(&sbp.lock);
+
+ return count;
+}
+
+static long sbprof_tb_ioctl(struct file *filp,
+ unsigned int command,
+ unsigned long arg)
+{
+ int err = 0;
+
+ switch (command) {
+ case SBPROF_ZBSTART:
+ mutex_lock(&sbp.lock);
+ err = sbprof_zbprof_start(filp);
+ mutex_unlock(&sbp.lock);
+ break;
+
+ case SBPROF_ZBSTOP:
+ mutex_lock(&sbp.lock);
+ err = sbprof_zbprof_stop();
+ mutex_unlock(&sbp.lock);
+ break;
+
+ case SBPROF_ZBWAITFULL: {
+ err = wait_event_interruptible(sbp.tb_read, TB_FULL);
+ if (err)
+ break;
+
+ err = put_user(TB_FULL, (int *) arg);
+ break;
+ }
+
+ default:
+ err = -EINVAL;
+ break;
+ }
+
+ return err;
+}
+
+static const struct file_operations sbprof_tb_fops = {
+ .owner = THIS_MODULE,
+ .open = sbprof_tb_open,
+ .release = sbprof_tb_release,
+ .read = sbprof_tb_read,
+ .unlocked_ioctl = sbprof_tb_ioctl,
+ .compat_ioctl = sbprof_tb_ioctl,
+ .mmap = NULL,
+ .llseek = default_llseek,
+};
+
+static struct class *tb_class;
+static struct device *tb_dev;
+
+static int __init sbprof_tb_init(void)
+{
+ struct device *dev;
+ struct class *tbc;
+ int err;
+
+ if (register_chrdev(SBPROF_TB_MAJOR, DEVNAME, &sbprof_tb_fops)) {
+ printk(KERN_WARNING DEVNAME ": initialization failed (dev %d)\n",
+ SBPROF_TB_MAJOR);
+ return -EIO;
+ }
+
+ tbc = class_create(THIS_MODULE, "sb_tracebuffer");
+ if (IS_ERR(tbc)) {
+ err = PTR_ERR(tbc);
+ goto out_chrdev;
+ }
+
+ tb_class = tbc;
+
+ dev = device_create(tbc, NULL, MKDEV(SBPROF_TB_MAJOR, 0), NULL, "tb");
+ if (IS_ERR(dev)) {
+ err = PTR_ERR(dev);
+ goto out_class;
+ }
+ tb_dev = dev;
+
+ sbp.open = SB_CLOSED;
+ wmb();
+ tb_period = zbbus_mhz * 10000LL;
+ pr_info(DEVNAME ": initialized - tb_period = %lld\n",
+ (long long) tb_period);
+ return 0;
+
+out_class:
+ class_destroy(tb_class);
+out_chrdev:
+ unregister_chrdev(SBPROF_TB_MAJOR, DEVNAME);
+
+ return err;
+}
+
+static void __exit sbprof_tb_cleanup(void)
+{
+ device_destroy(tb_class, MKDEV(SBPROF_TB_MAJOR, 0));
+ unregister_chrdev(SBPROF_TB_MAJOR, DEVNAME);
+ class_destroy(tb_class);
+}
+
+module_init(sbprof_tb_init);
+module_exit(sbprof_tb_cleanup);
+
+MODULE_ALIAS_CHARDEV_MAJOR(SBPROF_TB_MAJOR);
+MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>");
+MODULE_LICENSE("GPL");
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 04:40:49 +0000