diff options
Diffstat (limited to 'arch/riscv/boot/dts/kendryte')
-rw-r--r-- | arch/riscv/boot/dts/kendryte/Makefile | 4 | ||||
-rw-r--r-- | arch/riscv/boot/dts/kendryte/k210.dts | 23 | ||||
-rw-r--r-- | arch/riscv/boot/dts/kendryte/k210.dtsi | 125 |
3 files changed, 152 insertions, 0 deletions
diff --git a/arch/riscv/boot/dts/kendryte/Makefile b/arch/riscv/boot/dts/kendryte/Makefile new file mode 100644 index 000000000..1a88e616f --- /dev/null +++ b/arch/riscv/boot/dts/kendryte/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 +dtb-$(CONFIG_SOC_KENDRYTE_K210_DTB) += k210.dtb + +obj-$(CONFIG_SOC_KENDRYTE_K210_DTB_BUILTIN) += $(addsuffix .o, $(dtb-y)) diff --git a/arch/riscv/boot/dts/kendryte/k210.dts b/arch/riscv/boot/dts/kendryte/k210.dts new file mode 100644 index 000000000..0d1f28fce --- /dev/null +++ b/arch/riscv/boot/dts/kendryte/k210.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2020 Western Digital Corporation or its affiliates. + */ + +/dts-v1/; + +#include "k210.dtsi" + +/ { + model = "Kendryte K210 generic"; + compatible = "kendryte,k210"; + + chosen { + bootargs = "earlycon console=ttySIF0"; + stdout-path = "serial0"; + }; +}; + +&uarths0 { + status = "okay"; +}; + diff --git a/arch/riscv/boot/dts/kendryte/k210.dtsi b/arch/riscv/boot/dts/kendryte/k210.dtsi new file mode 100644 index 000000000..d2d0ff645 --- /dev/null +++ b/arch/riscv/boot/dts/kendryte/k210.dtsi @@ -0,0 +1,125 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Sean Anderson <seanga2@gmail.com> + * Copyright (C) 2020 Western Digital Corporation or its affiliates. + */ +#include <dt-bindings/clock/k210-clk.h> + +/ { + /* + * Although the K210 is a 64-bit CPU, the address bus is only 32-bits + * wide, and the upper half of all addresses is ignored. + */ + #address-cells = <1>; + #size-cells = <1>; + compatible = "kendryte,k210"; + + aliases { + serial0 = &uarths0; + }; + + /* + * The K210 has an sv39 MMU following the priviledge specification v1.9. + * Since this is a non-ratified draft specification, the kernel does not + * support it and the K210 support enabled only for the !MMU case. + * Be consistent with this by setting the CPUs MMU type to "none". + */ + cpus { + #address-cells = <1>; + #size-cells = <0>; + timebase-frequency = <7800000>; + cpu0: cpu@0 { + device_type = "cpu"; + reg = <0>; + compatible = "kendryte,k210", "sifive,rocket0", "riscv"; + riscv,isa = "rv64imafdc"; + mmu-type = "none"; + i-cache-size = <0x8000>; + i-cache-block-size = <64>; + d-cache-size = <0x8000>; + d-cache-block-size = <64>; + clocks = <&sysctl K210_CLK_CPU>; + clock-frequency = <390000000>; + cpu0_intc: interrupt-controller { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "riscv,cpu-intc"; + }; + }; + cpu1: cpu@1 { + device_type = "cpu"; + reg = <1>; + compatible = "kendryte,k210", "sifive,rocket0", "riscv"; + riscv,isa = "rv64imafdc"; + mmu-type = "none"; + i-cache-size = <0x8000>; + i-cache-block-size = <64>; + d-cache-size = <0x8000>; + d-cache-block-size = <64>; + clocks = <&sysctl K210_CLK_CPU>; + clock-frequency = <390000000>; + cpu1_intc: interrupt-controller { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "riscv,cpu-intc"; + }; + }; + }; + + sram: memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x400000>, + <0x80400000 0x200000>, + <0x80600000 0x200000>; + reg-names = "sram0", "sram1", "aisram"; + }; + + clocks { + in0: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "kendryte,k210-soc", "simple-bus"; + ranges; + interrupt-parent = <&plic0>; + + sysctl: sysctl@50440000 { + compatible = "kendryte,k210-sysctl", "simple-mfd"; + reg = <0x50440000 0x1000>; + #clock-cells = <1>; + }; + + clint0: clint@2000000 { + #interrupt-cells = <1>; + compatible = "riscv,clint0"; + reg = <0x2000000 0xC000>; + interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7 + &cpu1_intc 3 &cpu1_intc 7>; + clocks = <&sysctl K210_CLK_ACLK>; + }; + + plic0: interrupt-controller@c000000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "kendryte,k210-plic0", "riscv,plic0"; + reg = <0xC000000 0x4000000>; + interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 0xffffffff>, + <&cpu1_intc 11>, <&cpu1_intc 0xffffffff>; + riscv,ndev = <65>; + riscv,max-priority = <7>; + }; + + uarths0: serial@38000000 { + compatible = "kendryte,k210-uarths", "sifive,uart0"; + reg = <0x38000000 0x1000>; + interrupts = <33>; + clocks = <&sysctl K210_CLK_CPU>; + }; + }; +}; |