diff options
Diffstat (limited to '')
67 files changed, 11074 insertions, 0 deletions
diff --git a/arch/x86/boot/.gitignore b/arch/x86/boot/.gitignore new file mode 100644 index 000000000..9cc7f1357 --- /dev/null +++ b/arch/x86/boot/.gitignore @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: GPL-2.0-only +bootsect +bzImage +cpustr.h +mkcpustr +voffset.h +zoffset.h +setup +setup.bin +setup.elf +fdimage +mtools.conf +image.iso diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile new file mode 100644 index 000000000..59a42342b --- /dev/null +++ b/arch/x86/boot/Makefile @@ -0,0 +1,161 @@ +# +# arch/x86/boot/Makefile +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 1994 by Linus Torvalds +# Changed by many, many contributors over the years. +# + +# Sanitizer runtimes are unavailable and cannot be linked for early boot code. +KASAN_SANITIZE := n +KCSAN_SANITIZE := n +OBJECT_FILES_NON_STANDARD := y + +# Kernel does not boot with kcov instrumentation here. +# One of the problems observed was insertion of __sanitizer_cov_trace_pc() +# callback into middle of per-cpu data enabling code. Thus the callback observed +# inconsistent state and crashed. We are interested mostly in syscall coverage, +# so boot code is not interesting anyway. +KCOV_INSTRUMENT := n + +# If you want to preset the SVGA mode, uncomment the next line and +# set SVGA_MODE to whatever number you want. +# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode. +# The number is the same as you would ordinarily press at bootup. + +SVGA_MODE := -DSVGA_MODE=NORMAL_VGA + +targets := vmlinux.bin setup.bin setup.elf bzImage +targets += fdimage fdimage144 fdimage288 image.iso mtools.conf +subdir- := compressed + +setup-y += a20.o bioscall.o cmdline.o copy.o cpu.o cpuflags.o cpucheck.o +setup-y += early_serial_console.o edd.o header.o main.o memory.o +setup-y += pm.o pmjump.o printf.o regs.o string.o tty.o video.o +setup-y += video-mode.o version.o +setup-$(CONFIG_X86_APM_BOOT) += apm.o + +# The link order of the video-*.o modules can matter. In particular, +# video-vga.o *must* be listed first, followed by video-vesa.o. +# Hardware-specific drivers should follow in the order they should be +# probed, and video-bios.o should typically be last. +setup-y += video-vga.o +setup-y += video-vesa.o +setup-y += video-bios.o + +targets += $(setup-y) +hostprogs := tools/build +hostprogs += mkcpustr + +HOST_EXTRACFLAGS += -I$(srctree)/tools/include \ + -include include/generated/autoconf.h \ + -D__EXPORTED_HEADERS__ + +ifdef CONFIG_X86_FEATURE_NAMES +$(obj)/cpu.o: $(obj)/cpustr.h + +quiet_cmd_cpustr = CPUSTR $@ + cmd_cpustr = $(obj)/mkcpustr > $@ +$(obj)/cpustr.h: $(obj)/mkcpustr FORCE + $(call if_changed,cpustr) +endif +targets += cpustr.h + +# --------------------------------------------------------------------------- + +KBUILD_CFLAGS := $(REALMODE_CFLAGS) -D_SETUP +KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__ +KBUILD_CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=) +KBUILD_CFLAGS += -fno-asynchronous-unwind-tables +GCOV_PROFILE := n +UBSAN_SANITIZE := n + +$(obj)/bzImage: asflags-y := $(SVGA_MODE) + +quiet_cmd_image = BUILD $@ +silent_redirect_image = >/dev/null +cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin \ + $(obj)/zoffset.h $@ $($(quiet)redirect_image) + +$(obj)/bzImage: $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/tools/build FORCE + $(call if_changed,image) + @$(kecho) 'Kernel: $@ is ready' ' (#'`cat .version`')' + +OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note -R .comment -S +$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE + $(call if_changed,objcopy) + +SETUP_OBJS = $(addprefix $(obj)/,$(setup-y)) + +sed-zoffset := -e 's/^\([0-9a-fA-F]*\) [a-zA-Z] \(startup_32\|startup_64\|efi32_stub_entry\|efi64_stub_entry\|efi_pe_entry\|efi32_pe_entry\|input_data\|kernel_info\|_end\|_ehead\|_text\|z_.*\)$$/\#define ZO_\2 0x\1/p' + +quiet_cmd_zoffset = ZOFFSET $@ + cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@ + +targets += zoffset.h +$(obj)/zoffset.h: $(obj)/compressed/vmlinux FORCE + $(call if_changed,zoffset) + + +AFLAGS_header.o += -I$(objtree)/$(obj) +$(obj)/header.o: $(obj)/zoffset.h + +LDFLAGS_setup.elf := -m elf_i386 -z noexecstack -T +$(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE + $(call if_changed,ld) + +OBJCOPYFLAGS_setup.bin := -O binary +$(obj)/setup.bin: $(obj)/setup.elf FORCE + $(call if_changed,objcopy) + +$(obj)/compressed/vmlinux: FORCE + $(Q)$(MAKE) $(build)=$(obj)/compressed $@ + +# Set this if you want to pass append arguments to the +# bzdisk/fdimage/isoimage kernel +FDARGS = +# Set this if you want an initrd included with the +# bzdisk/fdimage/isoimage kernel +FDINITRD = + +image_cmdline = default linux $(FDARGS) $(if $(FDINITRD),initrd=initrd.img,) + +$(obj)/mtools.conf: $(src)/mtools.conf.in + sed -e 's|@OBJ@|$(obj)|g' < $< > $@ + +quiet_cmd_genimage = GENIMAGE $3 +cmd_genimage = sh $(srctree)/$(src)/genimage.sh $2 $3 $(obj)/bzImage \ + $(obj)/mtools.conf '$(image_cmdline)' $(FDINITRD) + +PHONY += bzdisk fdimage fdimage144 fdimage288 isoimage bzlilo install + +# This requires write access to /dev/fd0 +bzdisk: $(obj)/bzImage $(obj)/mtools.conf + $(call cmd,genimage,bzdisk,/dev/fd0) + +# These require being root or having syslinux 2.02 or higher installed +fdimage fdimage144: $(obj)/bzImage $(obj)/mtools.conf + $(call cmd,genimage,fdimage144,$(obj)/fdimage) + @$(kecho) 'Kernel: $(obj)/fdimage is ready' + +fdimage288: $(obj)/bzImage $(obj)/mtools.conf + $(call cmd,genimage,fdimage288,$(obj)/fdimage) + @$(kecho) 'Kernel: $(obj)/fdimage is ready' + +isoimage: $(obj)/bzImage + $(call cmd,genimage,isoimage,$(obj)/image.iso) + @$(kecho) 'Kernel: $(obj)/image.iso is ready' + +bzlilo: + if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi + if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi + cat $(obj)/bzImage > $(INSTALL_PATH)/vmlinuz + cp System.map $(INSTALL_PATH)/ + if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi + +install: + sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(obj)/bzImage \ + System.map "$(INSTALL_PATH)" diff --git a/arch/x86/boot/a20.c b/arch/x86/boot/a20.c new file mode 100644 index 000000000..a2b6b4289 --- /dev/null +++ b/arch/x86/boot/a20.c @@ -0,0 +1,163 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007-2008 rPath, Inc. - All Rights Reserved + * Copyright 2009 Intel Corporation; author H. Peter Anvin + * + * ----------------------------------------------------------------------- */ + +/* + * Enable A20 gate (return -1 on failure) + */ + +#include "boot.h" + +#define MAX_8042_LOOPS 100000 +#define MAX_8042_FF 32 + +static int empty_8042(void) +{ + u8 status; + int loops = MAX_8042_LOOPS; + int ffs = MAX_8042_FF; + + while (loops--) { + io_delay(); + + status = inb(0x64); + if (status == 0xff) { + /* FF is a plausible, but very unlikely status */ + if (!--ffs) + return -1; /* Assume no KBC present */ + } + if (status & 1) { + /* Read and discard input data */ + io_delay(); + (void)inb(0x60); + } else if (!(status & 2)) { + /* Buffers empty, finished! */ + return 0; + } + } + + return -1; +} + +/* Returns nonzero if the A20 line is enabled. The memory address + used as a test is the int $0x80 vector, which should be safe. */ + +#define A20_TEST_ADDR (4*0x80) +#define A20_TEST_SHORT 32 +#define A20_TEST_LONG 2097152 /* 2^21 */ + +static int a20_test(int loops) +{ + int ok = 0; + int saved, ctr; + + set_fs(0x0000); + set_gs(0xffff); + + saved = ctr = rdfs32(A20_TEST_ADDR); + + while (loops--) { + wrfs32(++ctr, A20_TEST_ADDR); + io_delay(); /* Serialize and make delay constant */ + ok = rdgs32(A20_TEST_ADDR+0x10) ^ ctr; + if (ok) + break; + } + + wrfs32(saved, A20_TEST_ADDR); + return ok; +} + +/* Quick test to see if A20 is already enabled */ +static int a20_test_short(void) +{ + return a20_test(A20_TEST_SHORT); +} + +/* Longer test that actually waits for A20 to come on line; this + is useful when dealing with the KBC or other slow external circuitry. */ +static int a20_test_long(void) +{ + return a20_test(A20_TEST_LONG); +} + +static void enable_a20_bios(void) +{ + struct biosregs ireg; + + initregs(&ireg); + ireg.ax = 0x2401; + intcall(0x15, &ireg, NULL); +} + +static void enable_a20_kbc(void) +{ + empty_8042(); + + outb(0xd1, 0x64); /* Command write */ + empty_8042(); + + outb(0xdf, 0x60); /* A20 on */ + empty_8042(); + + outb(0xff, 0x64); /* Null command, but UHCI wants it */ + empty_8042(); +} + +static void enable_a20_fast(void) +{ + u8 port_a; + + port_a = inb(0x92); /* Configuration port A */ + port_a |= 0x02; /* Enable A20 */ + port_a &= ~0x01; /* Do not reset machine */ + outb(port_a, 0x92); +} + +/* + * Actual routine to enable A20; return 0 on ok, -1 on failure + */ + +#define A20_ENABLE_LOOPS 255 /* Number of times to try */ + +int enable_a20(void) +{ + int loops = A20_ENABLE_LOOPS; + int kbc_err; + + while (loops--) { + /* First, check to see if A20 is already enabled + (legacy free, etc.) */ + if (a20_test_short()) + return 0; + + /* Next, try the BIOS (INT 0x15, AX=0x2401) */ + enable_a20_bios(); + if (a20_test_short()) + return 0; + + /* Try enabling A20 through the keyboard controller */ + kbc_err = empty_8042(); + + if (a20_test_short()) + return 0; /* BIOS worked, but with delayed reaction */ + + if (!kbc_err) { + enable_a20_kbc(); + if (a20_test_long()) + return 0; + } + + /* Finally, try enabling the "fast A20 gate" */ + enable_a20_fast(); + if (a20_test_long()) + return 0; + } + + return -1; +} diff --git a/arch/x86/boot/apm.c b/arch/x86/boot/apm.c new file mode 100644 index 000000000..bda15f967 --- /dev/null +++ b/arch/x86/boot/apm.c @@ -0,0 +1,73 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * Copyright 2009 Intel Corporation; author H. Peter Anvin + * + * Original APM BIOS checking by Stephen Rothwell, May 1994 + * (sfr@canb.auug.org.au) + * + * ----------------------------------------------------------------------- */ + +/* + * Get APM BIOS information + */ + +#include "boot.h" + +int query_apm_bios(void) +{ + struct biosregs ireg, oreg; + + /* APM BIOS installation check */ + initregs(&ireg); + ireg.ah = 0x53; + intcall(0x15, &ireg, &oreg); + + if (oreg.flags & X86_EFLAGS_CF) + return -1; /* No APM BIOS */ + + if (oreg.bx != 0x504d) /* "PM" signature */ + return -1; + + if (!(oreg.cx & 0x02)) /* 32 bits supported? */ + return -1; + + /* Disconnect first, just in case */ + ireg.al = 0x04; + intcall(0x15, &ireg, NULL); + + /* 32-bit connect */ + ireg.al = 0x03; + intcall(0x15, &ireg, &oreg); + + boot_params.apm_bios_info.cseg = oreg.ax; + boot_params.apm_bios_info.offset = oreg.ebx; + boot_params.apm_bios_info.cseg_16 = oreg.cx; + boot_params.apm_bios_info.dseg = oreg.dx; + boot_params.apm_bios_info.cseg_len = oreg.si; + boot_params.apm_bios_info.cseg_16_len = oreg.hsi; + boot_params.apm_bios_info.dseg_len = oreg.di; + + if (oreg.flags & X86_EFLAGS_CF) + return -1; + + /* Redo the installation check as the 32-bit connect; + some BIOSes return different flags this way... */ + + ireg.al = 0x00; + intcall(0x15, &ireg, &oreg); + + if ((oreg.eflags & X86_EFLAGS_CF) || oreg.bx != 0x504d) { + /* Failure with 32-bit connect, try to disconnect and ignore */ + ireg.al = 0x04; + intcall(0x15, &ireg, NULL); + return -1; + } + + boot_params.apm_bios_info.version = oreg.ax; + boot_params.apm_bios_info.flags = oreg.cx; + return 0; +} + diff --git a/arch/x86/boot/bioscall.S b/arch/x86/boot/bioscall.S new file mode 100644 index 000000000..aa9b96457 --- /dev/null +++ b/arch/x86/boot/bioscall.S @@ -0,0 +1,79 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* ----------------------------------------------------------------------- + * + * Copyright 2009-2014 Intel Corporation; author H. Peter Anvin + * + * ----------------------------------------------------------------------- */ + +/* + * "Glove box" for BIOS calls. Avoids the constant problems with BIOSes + * touching registers they shouldn't be. + */ + + .code16 + .section ".inittext","ax" + .globl intcall + .type intcall, @function +intcall: + /* Self-modify the INT instruction. Ugly, but works. */ + cmpb %al, 3f + je 1f + movb %al, 3f + jmp 1f /* Synchronize pipeline */ +1: + /* Save state */ + pushfl + pushw %fs + pushw %gs + pushal + + /* Copy input state to stack frame */ + subw $44, %sp + movw %dx, %si + movw %sp, %di + movw $11, %cx + rep; movsl + + /* Pop full state from the stack */ + popal + popw %gs + popw %fs + popw %es + popw %ds + popfl + + /* Actual INT */ + .byte 0xcd /* INT opcode */ +3: .byte 0 + + /* Push full state to the stack */ + pushfl + pushw %ds + pushw %es + pushw %fs + pushw %gs + pushal + + /* Re-establish C environment invariants */ + cld + movzwl %sp, %esp + movw %cs, %ax + movw %ax, %ds + movw %ax, %es + + /* Copy output state from stack frame */ + movw 68(%esp), %di /* Original %cx == 3rd argument */ + andw %di, %di + jz 4f + movw %sp, %si + movw $11, %cx + rep; movsl +4: addw $44, %sp + + /* Restore state and return */ + popal + popw %gs + popw %fs + popfl + retl + .size intcall, .-intcall diff --git a/arch/x86/boot/bitops.h b/arch/x86/boot/bitops.h new file mode 100644 index 000000000..02e1dea11 --- /dev/null +++ b/arch/x86/boot/bitops.h @@ -0,0 +1,44 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * ----------------------------------------------------------------------- */ + +/* + * Very simple bitops for the boot code. + */ + +#ifndef BOOT_BITOPS_H +#define BOOT_BITOPS_H +#define _LINUX_BITOPS_H /* Inhibit inclusion of <linux/bitops.h> */ + +#include <linux/types.h> +#include <asm/asm.h> + +static inline bool constant_test_bit(int nr, const void *addr) +{ + const u32 *p = (const u32 *)addr; + return ((1UL << (nr & 31)) & (p[nr >> 5])) != 0; +} +static inline bool variable_test_bit(int nr, const void *addr) +{ + bool v; + const u32 *p = (const u32 *)addr; + + asm("btl %2,%1" CC_SET(c) : CC_OUT(c) (v) : "m" (*p), "Ir" (nr)); + return v; +} + +#define test_bit(nr,addr) \ +(__builtin_constant_p(nr) ? \ + constant_test_bit((nr),(addr)) : \ + variable_test_bit((nr),(addr))) + +static inline void set_bit(int nr, void *addr) +{ + asm("btsl %1,%0" : "+m" (*(u32 *)addr) : "Ir" (nr)); +} + +#endif /* BOOT_BITOPS_H */ diff --git a/arch/x86/boot/boot.h b/arch/x86/boot/boot.h new file mode 100644 index 000000000..4d79391bb --- /dev/null +++ b/arch/x86/boot/boot.h @@ -0,0 +1,366 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * Copyright 2009 Intel Corporation; author H. Peter Anvin + * + * ----------------------------------------------------------------------- */ + +/* + * Header file for the real-mode kernel code + */ + +#ifndef BOOT_BOOT_H +#define BOOT_BOOT_H + +#define STACK_SIZE 1024 /* Minimum number of bytes for stack */ + +#ifndef __ASSEMBLY__ + +#include <stdarg.h> +#include <linux/types.h> +#include <linux/edd.h> +#include <asm/setup.h> +#include <asm/asm.h> +#include "bitops.h" +#include "ctype.h" +#include "cpuflags.h" + +/* Useful macros */ +#define ARRAY_SIZE(x) (sizeof(x) / sizeof(*(x))) + +extern struct setup_header hdr; +extern struct boot_params boot_params; + +#define cpu_relax() asm volatile("rep; nop") + +/* Basic port I/O */ +static inline void outb(u8 v, u16 port) +{ + asm volatile("outb %0,%1" : : "a" (v), "dN" (port)); +} +static inline u8 inb(u16 port) +{ + u8 v; + asm volatile("inb %1,%0" : "=a" (v) : "dN" (port)); + return v; +} + +static inline void outw(u16 v, u16 port) +{ + asm volatile("outw %0,%1" : : "a" (v), "dN" (port)); +} +static inline u16 inw(u16 port) +{ + u16 v; + asm volatile("inw %1,%0" : "=a" (v) : "dN" (port)); + return v; +} + +static inline void outl(u32 v, u16 port) +{ + asm volatile("outl %0,%1" : : "a" (v), "dN" (port)); +} +static inline u32 inl(u16 port) +{ + u32 v; + asm volatile("inl %1,%0" : "=a" (v) : "dN" (port)); + return v; +} + +static inline void io_delay(void) +{ + const u16 DELAY_PORT = 0x80; + asm volatile("outb %%al,%0" : : "dN" (DELAY_PORT)); +} + +/* These functions are used to reference data in other segments. */ + +static inline u16 ds(void) +{ + u16 seg; + asm("movw %%ds,%0" : "=rm" (seg)); + return seg; +} + +static inline void set_fs(u16 seg) +{ + asm volatile("movw %0,%%fs" : : "rm" (seg)); +} +static inline u16 fs(void) +{ + u16 seg; + asm volatile("movw %%fs,%0" : "=rm" (seg)); + return seg; +} + +static inline void set_gs(u16 seg) +{ + asm volatile("movw %0,%%gs" : : "rm" (seg)); +} +static inline u16 gs(void) +{ + u16 seg; + asm volatile("movw %%gs,%0" : "=rm" (seg)); + return seg; +} + +typedef unsigned int addr_t; + +static inline u8 rdfs8(addr_t addr) +{ + u8 *ptr = (u8 *)absolute_pointer(addr); + u8 v; + asm volatile("movb %%fs:%1,%0" : "=q" (v) : "m" (*ptr)); + return v; +} +static inline u16 rdfs16(addr_t addr) +{ + u16 *ptr = (u16 *)absolute_pointer(addr); + u16 v; + asm volatile("movw %%fs:%1,%0" : "=r" (v) : "m" (*ptr)); + return v; +} +static inline u32 rdfs32(addr_t addr) +{ + u32 *ptr = (u32 *)absolute_pointer(addr); + u32 v; + asm volatile("movl %%fs:%1,%0" : "=r" (v) : "m" (*ptr)); + return v; +} + +static inline void wrfs8(u8 v, addr_t addr) +{ + u8 *ptr = (u8 *)absolute_pointer(addr); + asm volatile("movb %1,%%fs:%0" : "+m" (*ptr) : "qi" (v)); +} +static inline void wrfs16(u16 v, addr_t addr) +{ + u16 *ptr = (u16 *)absolute_pointer(addr); + asm volatile("movw %1,%%fs:%0" : "+m" (*ptr) : "ri" (v)); +} +static inline void wrfs32(u32 v, addr_t addr) +{ + u32 *ptr = (u32 *)absolute_pointer(addr); + asm volatile("movl %1,%%fs:%0" : "+m" (*ptr) : "ri" (v)); +} + +static inline u8 rdgs8(addr_t addr) +{ + u8 *ptr = (u8 *)absolute_pointer(addr); + u8 v; + asm volatile("movb %%gs:%1,%0" : "=q" (v) : "m" (*ptr)); + return v; +} +static inline u16 rdgs16(addr_t addr) +{ + u16 *ptr = (u16 *)absolute_pointer(addr); + u16 v; + asm volatile("movw %%gs:%1,%0" : "=r" (v) : "m" (*ptr)); + return v; +} +static inline u32 rdgs32(addr_t addr) +{ + u32 *ptr = (u32 *)absolute_pointer(addr); + u32 v; + asm volatile("movl %%gs:%1,%0" : "=r" (v) : "m" (*ptr)); + return v; +} + +static inline void wrgs8(u8 v, addr_t addr) +{ + u8 *ptr = (u8 *)absolute_pointer(addr); + asm volatile("movb %1,%%gs:%0" : "+m" (*ptr) : "qi" (v)); +} +static inline void wrgs16(u16 v, addr_t addr) +{ + u16 *ptr = (u16 *)absolute_pointer(addr); + asm volatile("movw %1,%%gs:%0" : "+m" (*ptr) : "ri" (v)); +} +static inline void wrgs32(u32 v, addr_t addr) +{ + u32 *ptr = (u32 *)absolute_pointer(addr); + asm volatile("movl %1,%%gs:%0" : "+m" (*ptr) : "ri" (v)); +} + +/* Note: these only return true/false, not a signed return value! */ +static inline bool memcmp_fs(const void *s1, addr_t s2, size_t len) +{ + bool diff; + asm volatile("fs; repe; cmpsb" CC_SET(nz) + : CC_OUT(nz) (diff), "+D" (s1), "+S" (s2), "+c" (len)); + return diff; +} +static inline bool memcmp_gs(const void *s1, addr_t s2, size_t len) +{ + bool diff; + asm volatile("gs; repe; cmpsb" CC_SET(nz) + : CC_OUT(nz) (diff), "+D" (s1), "+S" (s2), "+c" (len)); + return diff; +} + +/* Heap -- available for dynamic lists. */ +extern char _end[]; +extern char *HEAP; +extern char *heap_end; +#define RESET_HEAP() ((void *)( HEAP = _end )) +static inline char *__get_heap(size_t s, size_t a, size_t n) +{ + char *tmp; + + HEAP = (char *)(((size_t)HEAP+(a-1)) & ~(a-1)); + tmp = HEAP; + HEAP += s*n; + return tmp; +} +#define GET_HEAP(type, n) \ + ((type *)__get_heap(sizeof(type),__alignof__(type),(n))) + +static inline bool heap_free(size_t n) +{ + return (int)(heap_end-HEAP) >= (int)n; +} + +/* copy.S */ + +void copy_to_fs(addr_t dst, void *src, size_t len); +void *copy_from_fs(void *dst, addr_t src, size_t len); +void copy_to_gs(addr_t dst, void *src, size_t len); +void *copy_from_gs(void *dst, addr_t src, size_t len); + +/* a20.c */ +int enable_a20(void); + +/* apm.c */ +int query_apm_bios(void); + +/* bioscall.c */ +struct biosregs { + union { + struct { + u32 edi; + u32 esi; + u32 ebp; + u32 _esp; + u32 ebx; + u32 edx; + u32 ecx; + u32 eax; + u32 _fsgs; + u32 _dses; + u32 eflags; + }; + struct { + u16 di, hdi; + u16 si, hsi; + u16 bp, hbp; + u16 _sp, _hsp; + u16 bx, hbx; + u16 dx, hdx; + u16 cx, hcx; + u16 ax, hax; + u16 gs, fs; + u16 es, ds; + u16 flags, hflags; + }; + struct { + u8 dil, dih, edi2, edi3; + u8 sil, sih, esi2, esi3; + u8 bpl, bph, ebp2, ebp3; + u8 _spl, _sph, _esp2, _esp3; + u8 bl, bh, ebx2, ebx3; + u8 dl, dh, edx2, edx3; + u8 cl, ch, ecx2, ecx3; + u8 al, ah, eax2, eax3; + }; + }; +}; +void intcall(u8 int_no, const struct biosregs *ireg, struct biosregs *oreg); + +/* cmdline.c */ +int __cmdline_find_option(unsigned long cmdline_ptr, const char *option, char *buffer, int bufsize); +int __cmdline_find_option_bool(unsigned long cmdline_ptr, const char *option); +static inline int cmdline_find_option(const char *option, char *buffer, int bufsize) +{ + unsigned long cmd_line_ptr = boot_params.hdr.cmd_line_ptr; + + if (cmd_line_ptr >= 0x100000) + return -1; /* inaccessible */ + + return __cmdline_find_option(cmd_line_ptr, option, buffer, bufsize); +} + +static inline int cmdline_find_option_bool(const char *option) +{ + unsigned long cmd_line_ptr = boot_params.hdr.cmd_line_ptr; + + if (cmd_line_ptr >= 0x100000) + return -1; /* inaccessible */ + + return __cmdline_find_option_bool(cmd_line_ptr, option); +} + +/* cpu.c, cpucheck.c */ +int check_cpu(int *cpu_level_ptr, int *req_level_ptr, u32 **err_flags_ptr); +int check_knl_erratum(void); +int validate_cpu(void); + +/* early_serial_console.c */ +extern int early_serial_base; +void console_init(void); + +/* edd.c */ +void query_edd(void); + +/* header.S */ +void __attribute__((noreturn)) die(void); + +/* memory.c */ +void detect_memory(void); + +/* pm.c */ +void __attribute__((noreturn)) go_to_protected_mode(void); + +/* pmjump.S */ +void __attribute__((noreturn)) + protected_mode_jump(u32 entrypoint, u32 bootparams); + +/* printf.c */ +int sprintf(char *buf, const char *fmt, ...); +int vsprintf(char *buf, const char *fmt, va_list args); +int printf(const char *fmt, ...); + +/* regs.c */ +void initregs(struct biosregs *regs); + +/* string.c */ +int strcmp(const char *str1, const char *str2); +int strncmp(const char *cs, const char *ct, size_t count); +size_t strnlen(const char *s, size_t maxlen); +unsigned int atou(const char *s); +unsigned long long simple_strtoull(const char *cp, char **endp, unsigned int base); +size_t strlen(const char *s); +char *strchr(const char *s, int c); + +/* tty.c */ +void puts(const char *); +void putchar(int); +int getchar(void); +void kbd_flush(void); +int getchar_timeout(void); + +/* video.c */ +void set_video(void); + +/* video-mode.c */ +int set_mode(u16 mode); +int mode_defined(u16 mode); +void probe_cards(int unsafe); + +/* video-vesa.c */ +void vesa_store_edid(void); + +#endif /* __ASSEMBLY__ */ + +#endif /* BOOT_BOOT_H */ diff --git a/arch/x86/boot/cmdline.c b/arch/x86/boot/cmdline.c new file mode 100644 index 000000000..21d56ae83 --- /dev/null +++ b/arch/x86/boot/cmdline.c @@ -0,0 +1,156 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * ----------------------------------------------------------------------- */ + +/* + * Simple command-line parser for early boot. + */ + +#include "boot.h" + +static inline int myisspace(u8 c) +{ + return c <= ' '; /* Close enough approximation */ +} + +/* + * Find a non-boolean option, that is, "option=argument". In accordance + * with standard Linux practice, if this option is repeated, this returns + * the last instance on the command line. + * + * Returns the length of the argument (regardless of if it was + * truncated to fit in the buffer), or -1 on not found. + */ +int __cmdline_find_option(unsigned long cmdline_ptr, const char *option, char *buffer, int bufsize) +{ + addr_t cptr; + char c; + int len = -1; + const char *opptr = NULL; + char *bufptr = buffer; + enum { + st_wordstart, /* Start of word/after whitespace */ + st_wordcmp, /* Comparing this word */ + st_wordskip, /* Miscompare, skip */ + st_bufcpy /* Copying this to buffer */ + } state = st_wordstart; + + if (!cmdline_ptr) + return -1; /* No command line */ + + cptr = cmdline_ptr & 0xf; + set_fs(cmdline_ptr >> 4); + + while (cptr < 0x10000 && (c = rdfs8(cptr++))) { + switch (state) { + case st_wordstart: + if (myisspace(c)) + break; + + /* else */ + state = st_wordcmp; + opptr = option; + fallthrough; + + case st_wordcmp: + if (c == '=' && !*opptr) { + len = 0; + bufptr = buffer; + state = st_bufcpy; + } else if (myisspace(c)) { + state = st_wordstart; + } else if (c != *opptr++) { + state = st_wordskip; + } + break; + + case st_wordskip: + if (myisspace(c)) + state = st_wordstart; + break; + + case st_bufcpy: + if (myisspace(c)) { + state = st_wordstart; + } else { + if (len < bufsize-1) + *bufptr++ = c; + len++; + } + break; + } + } + + if (bufsize) + *bufptr = '\0'; + + return len; +} + +/* + * Find a boolean option (like quiet,noapic,nosmp....) + * + * Returns the position of that option (starts counting with 1) + * or 0 on not found + */ +int __cmdline_find_option_bool(unsigned long cmdline_ptr, const char *option) +{ + addr_t cptr; + char c; + int pos = 0, wstart = 0; + const char *opptr = NULL; + enum { + st_wordstart, /* Start of word/after whitespace */ + st_wordcmp, /* Comparing this word */ + st_wordskip, /* Miscompare, skip */ + } state = st_wordstart; + + if (!cmdline_ptr) + return -1; /* No command line */ + + cptr = cmdline_ptr & 0xf; + set_fs(cmdline_ptr >> 4); + + while (cptr < 0x10000) { + c = rdfs8(cptr++); + pos++; + + switch (state) { + case st_wordstart: + if (!c) + return 0; + else if (myisspace(c)) + break; + + state = st_wordcmp; + opptr = option; + wstart = pos; + fallthrough; + + case st_wordcmp: + if (!*opptr) + if (!c || myisspace(c)) + return wstart; + else + state = st_wordskip; + else if (!c) + return 0; + else if (c != *opptr++) + state = st_wordskip; + break; + + case st_wordskip: + if (!c) + return 0; + else if (myisspace(c)) + state = st_wordstart; + break; + } + } + + return 0; /* Buffer overrun */ +} diff --git a/arch/x86/boot/code16gcc.h b/arch/x86/boot/code16gcc.h new file mode 100644 index 000000000..e19fd7536 --- /dev/null +++ b/arch/x86/boot/code16gcc.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +# +# code16gcc.h +# +# This file is added to the assembler via -Wa when compiling 16-bit C code. +# This is done this way instead via asm() to make sure gcc does not reorder +# things around us. +# +# gcc 4.9+ has a real -m16 option so we can drop this hack long term. +# + + .code16gcc diff --git a/arch/x86/boot/compressed/.gitignore b/arch/x86/boot/compressed/.gitignore new file mode 100644 index 000000000..25805199a --- /dev/null +++ b/arch/x86/boot/compressed/.gitignore @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0-only +relocs +vmlinux.bin.all +vmlinux.relocs +vmlinux.lds +mkpiggy +piggy.S diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile new file mode 100644 index 000000000..ad268a15b --- /dev/null +++ b/arch/x86/boot/compressed/Makefile @@ -0,0 +1,155 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# linux/arch/x86/boot/compressed/Makefile +# +# create a compressed vmlinux image from the original vmlinux +# +# vmlinuz is: +# decompression code (*.o) +# asm globals (piggy.S), including: +# vmlinux.bin.(gz|bz2|lzma|...) +# +# vmlinux.bin is: +# vmlinux stripped of debugging and comments +# vmlinux.bin.all is: +# vmlinux.bin + vmlinux.relocs +# vmlinux.bin.(gz|bz2|lzma|...) is: +# (see scripts/Makefile.lib size_append) +# compressed vmlinux.bin.all + u32 size of vmlinux.bin.all + +# Sanitizer runtimes are unavailable and cannot be linked for early boot code. +KASAN_SANITIZE := n +KCSAN_SANITIZE := n +OBJECT_FILES_NON_STANDARD := y + +# Prevents link failures: __sanitizer_cov_trace_pc() is not linked in. +KCOV_INSTRUMENT := n + +targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma \ + vmlinux.bin.xz vmlinux.bin.lzo vmlinux.bin.lz4 vmlinux.bin.zst + +# CLANG_FLAGS must come before any cc-disable-warning or cc-option calls in +# case of cross compiling, as it has the '--target=' flag, which is needed to +# avoid errors with '-march=i386', and future flags may depend on the target to +# be valid. +KBUILD_CFLAGS := -m$(BITS) -O2 $(CLANG_FLAGS) +KBUILD_CFLAGS += -fno-strict-aliasing -fPIE +KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING +cflags-$(CONFIG_X86_32) := -march=i386 +cflags-$(CONFIG_X86_64) := -mcmodel=small -mno-red-zone +KBUILD_CFLAGS += $(cflags-y) +KBUILD_CFLAGS += -mno-mmx -mno-sse +KBUILD_CFLAGS += -ffreestanding +KBUILD_CFLAGS += -fno-stack-protector +KBUILD_CFLAGS += $(call cc-disable-warning, address-of-packed-member) +KBUILD_CFLAGS += $(call cc-disable-warning, gnu) +KBUILD_CFLAGS += -Wno-pointer-sign +KBUILD_CFLAGS += $(call cc-option,-fmacro-prefix-map=$(srctree)/=) +KBUILD_CFLAGS += -fno-asynchronous-unwind-tables +KBUILD_CFLAGS += -D__DISABLE_EXPORTS +# Disable relocation relaxation in case the link is not PIE. +KBUILD_CFLAGS += $(call as-option,-Wa$(comma)-mrelax-relocations=no) +KBUILD_CFLAGS += -include $(srctree)/include/linux/hidden.h + +# sev-es.c indirectly inludes inat-table.h which is generated during +# compilation and stored in $(objtree). Add the directory to the includes so +# that the compiler finds it even with out-of-tree builds (make O=/some/path). +CFLAGS_sev-es.o += -I$(objtree)/arch/x86/lib/ + +KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__ +GCOV_PROFILE := n +UBSAN_SANITIZE :=n + +KBUILD_LDFLAGS := -m elf_$(UTS_MACHINE) +KBUILD_LDFLAGS += $(call ld-option,--no-ld-generated-unwind-info) +# Compressed kernel should be built as PIE since it may be loaded at any +# address by the bootloader. +LDFLAGS_vmlinux := -pie $(call ld-option, --no-dynamic-linker) +ifdef CONFIG_LD_ORPHAN_WARN +LDFLAGS_vmlinux += --orphan-handling=warn +endif +LDFLAGS_vmlinux += -z noexecstack +LDFLAGS_vmlinux += $(call ld-option,--no-warn-rwx-segments) +LDFLAGS_vmlinux += -T + +hostprogs := mkpiggy +HOST_EXTRACFLAGS += -I$(srctree)/tools/include + +sed-voffset := -e 's/^\([0-9a-fA-F]*\) [ABCDGRSTVW] \(_text\|__bss_start\|_end\)$$/\#define VO_\2 _AC(0x\1,UL)/p' + +quiet_cmd_voffset = VOFFSET $@ + cmd_voffset = $(NM) $< | sed -n $(sed-voffset) > $@ + +targets += ../voffset.h + +$(obj)/../voffset.h: vmlinux FORCE + $(call if_changed,voffset) + +$(obj)/misc.o: $(obj)/../voffset.h + +vmlinux-objs-y := $(obj)/vmlinux.lds $(obj)/kernel_info.o $(obj)/head_$(BITS).o \ + $(obj)/misc.o $(obj)/string.o $(obj)/cmdline.o $(obj)/error.o \ + $(obj)/piggy.o $(obj)/cpuflags.o + +vmlinux-objs-$(CONFIG_EARLY_PRINTK) += $(obj)/early_serial_console.o +vmlinux-objs-$(CONFIG_RANDOMIZE_BASE) += $(obj)/kaslr.o +ifdef CONFIG_X86_64 + vmlinux-objs-y += $(obj)/ident_map_64.o + vmlinux-objs-y += $(obj)/idt_64.o $(obj)/idt_handlers_64.o + vmlinux-objs-y += $(obj)/mem_encrypt.o + vmlinux-objs-y += $(obj)/pgtable_64.o + vmlinux-objs-$(CONFIG_AMD_MEM_ENCRYPT) += $(obj)/sev-es.o +endif + +vmlinux-objs-$(CONFIG_ACPI) += $(obj)/acpi.o + +vmlinux-objs-$(CONFIG_EFI_MIXED) += $(obj)/efi_thunk_$(BITS).o +efi-obj-$(CONFIG_EFI_STUB) = $(objtree)/drivers/firmware/efi/libstub/lib.a + +$(obj)/vmlinux: $(vmlinux-objs-y) $(efi-obj-y) FORCE + $(call if_changed,ld) + +OBJCOPYFLAGS_vmlinux.bin := -R .comment -S +$(obj)/vmlinux.bin: vmlinux FORCE + $(call if_changed,objcopy) + +targets += $(patsubst $(obj)/%,%,$(vmlinux-objs-y)) vmlinux.bin.all vmlinux.relocs + +CMD_RELOCS = arch/x86/tools/relocs +quiet_cmd_relocs = RELOCS $@ + cmd_relocs = $(CMD_RELOCS) $< > $@;$(CMD_RELOCS) --abs-relocs $< +$(obj)/vmlinux.relocs: vmlinux FORCE + $(call if_changed,relocs) + +vmlinux.bin.all-y := $(obj)/vmlinux.bin +vmlinux.bin.all-$(CONFIG_X86_NEED_RELOCS) += $(obj)/vmlinux.relocs + +$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE + $(call if_changed,gzip) +$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE + $(call if_changed,bzip2) +$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE + $(call if_changed,lzma) +$(obj)/vmlinux.bin.xz: $(vmlinux.bin.all-y) FORCE + $(call if_changed,xzkern) +$(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y) FORCE + $(call if_changed,lzo) +$(obj)/vmlinux.bin.lz4: $(vmlinux.bin.all-y) FORCE + $(call if_changed,lz4) +$(obj)/vmlinux.bin.zst: $(vmlinux.bin.all-y) FORCE + $(call if_changed,zstd22) + +suffix-$(CONFIG_KERNEL_GZIP) := gz +suffix-$(CONFIG_KERNEL_BZIP2) := bz2 +suffix-$(CONFIG_KERNEL_LZMA) := lzma +suffix-$(CONFIG_KERNEL_XZ) := xz +suffix-$(CONFIG_KERNEL_LZO) := lzo +suffix-$(CONFIG_KERNEL_LZ4) := lz4 +suffix-$(CONFIG_KERNEL_ZSTD) := zst + +quiet_cmd_mkpiggy = MKPIGGY $@ + cmd_mkpiggy = $(obj)/mkpiggy $< > $@ + +targets += piggy.S +$(obj)/piggy.S: $(obj)/vmlinux.bin.$(suffix-y) $(obj)/mkpiggy FORCE + $(call if_changed,mkpiggy) diff --git a/arch/x86/boot/compressed/acpi.c b/arch/x86/boot/compressed/acpi.c new file mode 100644 index 000000000..8bcbcee54 --- /dev/null +++ b/arch/x86/boot/compressed/acpi.c @@ -0,0 +1,421 @@ +// SPDX-License-Identifier: GPL-2.0 +#define BOOT_CTYPE_H +#include "misc.h" +#include "error.h" +#include "../string.h" + +#include <linux/numa.h> +#include <linux/efi.h> +#include <asm/efi.h> + +/* + * Longest parameter of 'acpi=' is 'copy_dsdt', plus an extra '\0' + * for termination. + */ +#define MAX_ACPI_ARG_LENGTH 10 + +/* + * Immovable memory regions representation. Max amount of memory regions is + * MAX_NUMNODES*2. + */ +struct mem_vector immovable_mem[MAX_NUMNODES*2]; + +/* + * Search EFI system tables for RSDP. If both ACPI_20_TABLE_GUID and + * ACPI_TABLE_GUID are found, take the former, which has more features. + */ +static acpi_physical_address +__efi_get_rsdp_addr(unsigned long config_tables, unsigned int nr_tables, + bool efi_64) +{ + acpi_physical_address rsdp_addr = 0; + +#ifdef CONFIG_EFI + int i; + + /* Get EFI tables from systab. */ + for (i = 0; i < nr_tables; i++) { + acpi_physical_address table; + efi_guid_t guid; + + if (efi_64) { + efi_config_table_64_t *tbl = (efi_config_table_64_t *)config_tables + i; + + guid = tbl->guid; + table = tbl->table; + + if (!IS_ENABLED(CONFIG_X86_64) && table >> 32) { + debug_putstr("Error getting RSDP address: EFI config table located above 4GB.\n"); + return 0; + } + } else { + efi_config_table_32_t *tbl = (efi_config_table_32_t *)config_tables + i; + + guid = tbl->guid; + table = tbl->table; + } + + if (!(efi_guidcmp(guid, ACPI_TABLE_GUID))) + rsdp_addr = table; + else if (!(efi_guidcmp(guid, ACPI_20_TABLE_GUID))) + return table; + } +#endif + return rsdp_addr; +} + +/* EFI/kexec support is 64-bit only. */ +#ifdef CONFIG_X86_64 +static struct efi_setup_data *get_kexec_setup_data_addr(void) +{ + struct setup_data *data; + u64 pa_data; + + pa_data = boot_params->hdr.setup_data; + while (pa_data) { + data = (struct setup_data *)pa_data; + if (data->type == SETUP_EFI) + return (struct efi_setup_data *)(pa_data + sizeof(struct setup_data)); + + pa_data = data->next; + } + return NULL; +} + +static acpi_physical_address kexec_get_rsdp_addr(void) +{ + efi_system_table_64_t *systab; + struct efi_setup_data *esd; + struct efi_info *ei; + char *sig; + + esd = (struct efi_setup_data *)get_kexec_setup_data_addr(); + if (!esd) + return 0; + + if (!esd->tables) { + debug_putstr("Wrong kexec SETUP_EFI data.\n"); + return 0; + } + + ei = &boot_params->efi_info; + sig = (char *)&ei->efi_loader_signature; + if (strncmp(sig, EFI64_LOADER_SIGNATURE, 4)) { + debug_putstr("Wrong kexec EFI loader signature.\n"); + return 0; + } + + /* Get systab from boot params. */ + systab = (efi_system_table_64_t *) (ei->efi_systab | ((__u64)ei->efi_systab_hi << 32)); + if (!systab) + error("EFI system table not found in kexec boot_params."); + + return __efi_get_rsdp_addr((unsigned long)esd->tables, systab->nr_tables, true); +} +#else +static acpi_physical_address kexec_get_rsdp_addr(void) { return 0; } +#endif /* CONFIG_X86_64 */ + +static acpi_physical_address efi_get_rsdp_addr(void) +{ +#ifdef CONFIG_EFI + unsigned long systab, config_tables; + unsigned int nr_tables; + struct efi_info *ei; + bool efi_64; + char *sig; + + ei = &boot_params->efi_info; + sig = (char *)&ei->efi_loader_signature; + + if (!strncmp(sig, EFI64_LOADER_SIGNATURE, 4)) { + efi_64 = true; + } else if (!strncmp(sig, EFI32_LOADER_SIGNATURE, 4)) { + efi_64 = false; + } else { + debug_putstr("Wrong EFI loader signature.\n"); + return 0; + } + + /* Get systab from boot params. */ +#ifdef CONFIG_X86_64 + systab = ei->efi_systab | ((__u64)ei->efi_systab_hi << 32); +#else + if (ei->efi_systab_hi || ei->efi_memmap_hi) { + debug_putstr("Error getting RSDP address: EFI system table located above 4GB.\n"); + return 0; + } + systab = ei->efi_systab; +#endif + if (!systab) + error("EFI system table not found."); + + /* Handle EFI bitness properly */ + if (efi_64) { + efi_system_table_64_t *stbl = (efi_system_table_64_t *)systab; + + config_tables = stbl->tables; + nr_tables = stbl->nr_tables; + } else { + efi_system_table_32_t *stbl = (efi_system_table_32_t *)systab; + + config_tables = stbl->tables; + nr_tables = stbl->nr_tables; + } + + if (!config_tables) + error("EFI config tables not found."); + + return __efi_get_rsdp_addr(config_tables, nr_tables, efi_64); +#else + return 0; +#endif +} + +static u8 compute_checksum(u8 *buffer, u32 length) +{ + u8 *end = buffer + length; + u8 sum = 0; + + while (buffer < end) + sum += *(buffer++); + + return sum; +} + +/* Search a block of memory for the RSDP signature. */ +static u8 *scan_mem_for_rsdp(u8 *start, u32 length) +{ + struct acpi_table_rsdp *rsdp; + u8 *address, *end; + + end = start + length; + + /* Search from given start address for the requested length */ + for (address = start; address < end; address += ACPI_RSDP_SCAN_STEP) { + /* + * Both RSDP signature and checksum must be correct. + * Note: Sometimes there exists more than one RSDP in memory; + * the valid RSDP has a valid checksum, all others have an + * invalid checksum. + */ + rsdp = (struct acpi_table_rsdp *)address; + + /* BAD Signature */ + if (!ACPI_VALIDATE_RSDP_SIG(rsdp->signature)) + continue; + + /* Check the standard checksum */ + if (compute_checksum((u8 *)rsdp, ACPI_RSDP_CHECKSUM_LENGTH)) + continue; + + /* Check extended checksum if table version >= 2 */ + if ((rsdp->revision >= 2) && + (compute_checksum((u8 *)rsdp, ACPI_RSDP_XCHECKSUM_LENGTH))) + continue; + + /* Signature and checksum valid, we have found a real RSDP */ + return address; + } + return NULL; +} + +/* Search RSDP address in EBDA. */ +static acpi_physical_address bios_get_rsdp_addr(void) +{ + unsigned long address; + u8 *rsdp; + + /* Get the location of the Extended BIOS Data Area (EBDA) */ + address = *(u16 *)ACPI_EBDA_PTR_LOCATION; + address <<= 4; + + /* + * Search EBDA paragraphs (EBDA is required to be a minimum of + * 1K length) + */ + if (address > 0x400) { + rsdp = scan_mem_for_rsdp((u8 *)address, ACPI_EBDA_WINDOW_SIZE); + if (rsdp) + return (acpi_physical_address)(unsigned long)rsdp; + } + + /* Search upper memory: 16-byte boundaries in E0000h-FFFFFh */ + rsdp = scan_mem_for_rsdp((u8 *) ACPI_HI_RSDP_WINDOW_BASE, + ACPI_HI_RSDP_WINDOW_SIZE); + if (rsdp) + return (acpi_physical_address)(unsigned long)rsdp; + + return 0; +} + +/* Return RSDP address on success, otherwise 0. */ +acpi_physical_address get_rsdp_addr(void) +{ + acpi_physical_address pa; + + pa = boot_params->acpi_rsdp_addr; + + /* + * Try to get EFI data from setup_data. This can happen when we're a + * kexec'ed kernel and kexec(1) has passed all the required EFI info to + * us. + */ + if (!pa) + pa = kexec_get_rsdp_addr(); + + if (!pa) + pa = efi_get_rsdp_addr(); + + if (!pa) + pa = bios_get_rsdp_addr(); + + return pa; +} + +#if defined(CONFIG_RANDOMIZE_BASE) && defined(CONFIG_MEMORY_HOTREMOVE) +/* + * Max length of 64-bit hex address string is 19, prefix "0x" + 16 hex + * digits, and '\0' for termination. + */ +#define MAX_ADDR_LEN 19 + +static unsigned long get_cmdline_acpi_rsdp(void) +{ + unsigned long addr = 0; + +#ifdef CONFIG_KEXEC + char val[MAX_ADDR_LEN] = { }; + int ret; + + ret = cmdline_find_option("acpi_rsdp", val, MAX_ADDR_LEN); + if (ret < 0) + return 0; + + if (boot_kstrtoul(val, 16, &addr)) + return 0; +#endif + return addr; +} + +/* Compute SRAT address from RSDP. */ +static unsigned long get_acpi_srat_table(void) +{ + unsigned long root_table, acpi_table; + struct acpi_table_header *header; + struct acpi_table_rsdp *rsdp; + u32 num_entries, size, len; + char arg[10]; + u8 *entry; + + /* + * Check whether we were given an RSDP on the command line. We don't + * stash this in boot params because the kernel itself may have + * different ideas about whether to trust a command-line parameter. + */ + rsdp = (struct acpi_table_rsdp *)get_cmdline_acpi_rsdp(); + if (!rsdp) + rsdp = (struct acpi_table_rsdp *)(long) + boot_params->acpi_rsdp_addr; + + if (!rsdp) + return 0; + + /* Get ACPI root table from RSDP.*/ + if (!(cmdline_find_option("acpi", arg, sizeof(arg)) == 4 && + !strncmp(arg, "rsdt", 4)) && + rsdp->xsdt_physical_address && + rsdp->revision > 1) { + root_table = rsdp->xsdt_physical_address; + size = ACPI_XSDT_ENTRY_SIZE; + } else { + root_table = rsdp->rsdt_physical_address; + size = ACPI_RSDT_ENTRY_SIZE; + } + + if (!root_table) + return 0; + + header = (struct acpi_table_header *)root_table; + len = header->length; + if (len < sizeof(struct acpi_table_header) + size) + return 0; + + num_entries = (len - sizeof(struct acpi_table_header)) / size; + entry = (u8 *)(root_table + sizeof(struct acpi_table_header)); + + while (num_entries--) { + if (size == ACPI_RSDT_ENTRY_SIZE) + acpi_table = *(u32 *)entry; + else + acpi_table = *(u64 *)entry; + + if (acpi_table) { + header = (struct acpi_table_header *)acpi_table; + + if (ACPI_COMPARE_NAMESEG(header->signature, ACPI_SIG_SRAT)) + return acpi_table; + } + entry += size; + } + return 0; +} + +/** + * count_immovable_mem_regions - Parse SRAT and cache the immovable + * memory regions into the immovable_mem array. + * + * Return the number of immovable memory regions on success, 0 on failure: + * + * - Too many immovable memory regions + * - ACPI off or no SRAT found + * - No immovable memory region found. + */ +int count_immovable_mem_regions(void) +{ + unsigned long table_addr, table_end, table; + struct acpi_subtable_header *sub_table; + struct acpi_table_header *table_header; + char arg[MAX_ACPI_ARG_LENGTH]; + int num = 0; + + if (cmdline_find_option("acpi", arg, sizeof(arg)) == 3 && + !strncmp(arg, "off", 3)) + return 0; + + table_addr = get_acpi_srat_table(); + if (!table_addr) + return 0; + + table_header = (struct acpi_table_header *)table_addr; + table_end = table_addr + table_header->length; + table = table_addr + sizeof(struct acpi_table_srat); + + while (table + sizeof(struct acpi_subtable_header) < table_end) { + + sub_table = (struct acpi_subtable_header *)table; + if (!sub_table->length) { + debug_putstr("Invalid zero length SRAT subtable.\n"); + return 0; + } + + if (sub_table->type == ACPI_SRAT_TYPE_MEMORY_AFFINITY) { + struct acpi_srat_mem_affinity *ma; + + ma = (struct acpi_srat_mem_affinity *)sub_table; + if (!(ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) && ma->length) { + immovable_mem[num].start = ma->base_address; + immovable_mem[num].size = ma->length; + num++; + } + + if (num >= MAX_NUMNODES*2) { + debug_putstr("Too many immovable memory regions, aborting.\n"); + return 0; + } + } + table += sub_table->length; + } + return num; +} +#endif /* CONFIG_RANDOMIZE_BASE && CONFIG_MEMORY_HOTREMOVE */ diff --git a/arch/x86/boot/compressed/cmdline.c b/arch/x86/boot/compressed/cmdline.c new file mode 100644 index 000000000..f1add5d85 --- /dev/null +++ b/arch/x86/boot/compressed/cmdline.c @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "misc.h" + +static unsigned long fs; +static inline void set_fs(unsigned long seg) +{ + fs = seg << 4; /* shift it back */ +} +typedef unsigned long addr_t; +static inline char rdfs8(addr_t addr) +{ + return *((char *)(fs + addr)); +} +#include "../cmdline.c" +unsigned long get_cmd_line_ptr(void) +{ + unsigned long cmd_line_ptr = boot_params->hdr.cmd_line_ptr; + + cmd_line_ptr |= (u64)boot_params->ext_cmd_line_ptr << 32; + + return cmd_line_ptr; +} +int cmdline_find_option(const char *option, char *buffer, int bufsize) +{ + return __cmdline_find_option(get_cmd_line_ptr(), option, buffer, bufsize); +} +int cmdline_find_option_bool(const char *option) +{ + return __cmdline_find_option_bool(get_cmd_line_ptr(), option); +} diff --git a/arch/x86/boot/compressed/cpuflags.c b/arch/x86/boot/compressed/cpuflags.c new file mode 100644 index 000000000..0cc132389 --- /dev/null +++ b/arch/x86/boot/compressed/cpuflags.c @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "../cpuflags.c" + +bool has_cpuflag(int flag) +{ + get_cpuflags(); + + return test_bit(flag, cpu.flags); +} diff --git a/arch/x86/boot/compressed/early_serial_console.c b/arch/x86/boot/compressed/early_serial_console.c new file mode 100644 index 000000000..261e81fb9 --- /dev/null +++ b/arch/x86/boot/compressed/early_serial_console.c @@ -0,0 +1,5 @@ +#include "misc.h" + +int early_serial_base; + +#include "../early_serial_console.c" diff --git a/arch/x86/boot/compressed/efi_thunk_64.S b/arch/x86/boot/compressed/efi_thunk_64.S new file mode 100644 index 000000000..c8052a141 --- /dev/null +++ b/arch/x86/boot/compressed/efi_thunk_64.S @@ -0,0 +1,175 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2014, 2015 Intel Corporation; author Matt Fleming + * + * Early support for invoking 32-bit EFI services from a 64-bit kernel. + * + * Because this thunking occurs before ExitBootServices() we have to + * restore the firmware's 32-bit GDT before we make EFI serivce calls, + * since the firmware's 32-bit IDT is still currently installed and it + * needs to be able to service interrupts. + * + * On the plus side, we don't have to worry about mangling 64-bit + * addresses into 32-bits because we're executing with an identity + * mapped pagetable and haven't transitioned to 64-bit virtual addresses + * yet. + */ + +#include <linux/linkage.h> +#include <asm/msr.h> +#include <asm/page_types.h> +#include <asm/processor-flags.h> +#include <asm/segment.h> + + .code64 + .text +SYM_FUNC_START(__efi64_thunk) + push %rbp + push %rbx + + leaq 1f(%rip), %rbp + + movl %ds, %eax + push %rax + movl %es, %eax + push %rax + movl %ss, %eax + push %rax + + /* + * Convert x86-64 ABI params to i386 ABI + */ + subq $32, %rsp + movl %esi, 0x0(%rsp) + movl %edx, 0x4(%rsp) + movl %ecx, 0x8(%rsp) + movl %r8d, 0xc(%rsp) + movl %r9d, 0x10(%rsp) + + leaq 0x14(%rsp), %rbx + sgdt (%rbx) + + /* + * Switch to gdt with 32-bit segments. This is the firmware GDT + * that was installed when the kernel started executing. This + * pointer was saved at the EFI stub entry point in head_64.S. + * + * Pass the saved DS selector to the 32-bit code, and use far return to + * restore the saved CS selector. + */ + leaq efi32_boot_gdt(%rip), %rax + lgdt (%rax) + + movzwl efi32_boot_ds(%rip), %edx + movzwq efi32_boot_cs(%rip), %rax + pushq %rax + leaq efi_enter32(%rip), %rax + pushq %rax + lretq + +1: addq $32, %rsp + movq %rdi, %rax + + pop %rbx + movl %ebx, %ss + pop %rbx + movl %ebx, %es + pop %rbx + movl %ebx, %ds + /* Clear out 32-bit selector from FS and GS */ + xorl %ebx, %ebx + movl %ebx, %fs + movl %ebx, %gs + + /* + * Convert 32-bit status code into 64-bit. + */ + roll $1, %eax + rorq $1, %rax + + pop %rbx + pop %rbp + RET +SYM_FUNC_END(__efi64_thunk) + + .code32 +/* + * EFI service pointer must be in %edi. + * + * The stack should represent the 32-bit calling convention. + */ +SYM_FUNC_START_LOCAL(efi_enter32) + /* Load firmware selector into data and stack segment registers */ + movl %edx, %ds + movl %edx, %es + movl %edx, %fs + movl %edx, %gs + movl %edx, %ss + + /* Reload pgtables */ + movl %cr3, %eax + movl %eax, %cr3 + + /* Disable paging */ + movl %cr0, %eax + btrl $X86_CR0_PG_BIT, %eax + movl %eax, %cr0 + + /* Disable long mode via EFER */ + movl $MSR_EFER, %ecx + rdmsr + btrl $_EFER_LME, %eax + wrmsr + + call *%edi + + /* We must preserve return value */ + movl %eax, %edi + + /* + * Some firmware will return with interrupts enabled. Be sure to + * disable them before we switch GDTs. + */ + cli + + lgdtl (%ebx) + + movl %cr4, %eax + btsl $(X86_CR4_PAE_BIT), %eax + movl %eax, %cr4 + + movl %cr3, %eax + movl %eax, %cr3 + + movl $MSR_EFER, %ecx + rdmsr + btsl $_EFER_LME, %eax + wrmsr + + xorl %eax, %eax + lldt %ax + + pushl $__KERNEL_CS + pushl %ebp + + /* Enable paging */ + movl %cr0, %eax + btsl $X86_CR0_PG_BIT, %eax + movl %eax, %cr0 + lret +SYM_FUNC_END(efi_enter32) + + .data + .balign 8 +SYM_DATA_START(efi32_boot_gdt) + .word 0 + .quad 0 +SYM_DATA_END(efi32_boot_gdt) + +SYM_DATA_START(efi32_boot_cs) + .word 0 +SYM_DATA_END(efi32_boot_cs) + +SYM_DATA_START(efi32_boot_ds) + .word 0 +SYM_DATA_END(efi32_boot_ds) diff --git a/arch/x86/boot/compressed/error.c b/arch/x86/boot/compressed/error.c new file mode 100644 index 000000000..c881878e5 --- /dev/null +++ b/arch/x86/boot/compressed/error.c @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Callers outside of misc.c need access to the error reporting routines, + * but the *_putstr() functions need to stay in misc.c because of how + * memcpy() and memmove() are defined for the compressed boot environment. + */ +#include "misc.h" +#include "error.h" + +void warn(char *m) +{ + error_putstr("\n\n"); + error_putstr(m); + error_putstr("\n\n"); +} + +void error(char *m) +{ + warn(m); + error_putstr(" -- System halted"); + + while (1) + asm("hlt"); +} diff --git a/arch/x86/boot/compressed/error.h b/arch/x86/boot/compressed/error.h new file mode 100644 index 000000000..1de582118 --- /dev/null +++ b/arch/x86/boot/compressed/error.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef BOOT_COMPRESSED_ERROR_H +#define BOOT_COMPRESSED_ERROR_H + +#include <linux/compiler.h> + +void warn(char *m); +void error(char *m) __noreturn; + +#endif /* BOOT_COMPRESSED_ERROR_H */ diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S new file mode 100644 index 000000000..659fad53c --- /dev/null +++ b/arch/x86/boot/compressed/head_32.S @@ -0,0 +1,225 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * linux/boot/head.S + * + * Copyright (C) 1991, 1992, 1993 Linus Torvalds + */ + +/* + * head.S contains the 32-bit startup code. + * + * NOTE!!! Startup happens at absolute address 0x00001000, which is also where + * the page directory will exist. The startup code will be overwritten by + * the page directory. [According to comments etc elsewhere on a compressed + * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC] + * + * Page 0 is deliberately kept safe, since System Management Mode code in + * laptops may need to access the BIOS data stored there. This is also + * useful for future device drivers that either access the BIOS via VM86 + * mode. + */ + +/* + * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 + */ + .text + +#include <linux/init.h> +#include <linux/linkage.h> +#include <asm/segment.h> +#include <asm/page_types.h> +#include <asm/boot.h> +#include <asm/asm-offsets.h> +#include <asm/bootparam.h> + +/* + * These symbols needed to be marked as .hidden to prevent the BFD linker from + * generating R_386_32 (rather than R_386_RELATIVE) relocations for them when + * the 32-bit compressed kernel is linked as PIE. This is no longer necessary, + * but it doesn't hurt to keep them .hidden. + */ + .hidden _bss + .hidden _ebss + .hidden _end + + __HEAD +SYM_FUNC_START(startup_32) + cld + cli + +/* + * Calculate the delta between where we were compiled to run + * at and where we were actually loaded at. This can only be done + * with a short local call on x86. Nothing else will tell us what + * address we are running at. The reserved chunk of the real-mode + * data at 0x1e4 (defined as a scratch field) are used as the stack + * for this calculation. Only 4 bytes are needed. + */ + leal (BP_scratch+4)(%esi), %esp + call 1f +1: popl %edx + addl $_GLOBAL_OFFSET_TABLE_+(.-1b), %edx + + /* Load new GDT */ + leal gdt@GOTOFF(%edx), %eax + movl %eax, 2(%eax) + lgdt (%eax) + + /* Load segment registers with our descriptors */ + movl $__BOOT_DS, %eax + movl %eax, %ds + movl %eax, %es + movl %eax, %fs + movl %eax, %gs + movl %eax, %ss + +/* + * %edx contains the address we are loaded at by the boot loader (plus the + * offset to the GOT). The below code calculates %ebx to be the address where + * we should move the kernel image temporarily for safe in-place decompression + * (again, plus the offset to the GOT). + * + * %ebp is calculated to be the address that the kernel will be decompressed to. + */ + +#ifdef CONFIG_RELOCATABLE + leal startup_32@GOTOFF(%edx), %ebx + +#ifdef CONFIG_EFI_STUB +/* + * If we were loaded via the EFI LoadImage service, startup_32() will be at an + * offset to the start of the space allocated for the image. efi_pe_entry() will + * set up image_offset to tell us where the image actually starts, so that we + * can use the full available buffer. + * image_offset = startup_32 - image_base + * Otherwise image_offset will be zero and has no effect on the calculations. + */ + subl image_offset@GOTOFF(%edx), %ebx +#endif + + movl BP_kernel_alignment(%esi), %eax + decl %eax + addl %eax, %ebx + notl %eax + andl %eax, %ebx + cmpl $LOAD_PHYSICAL_ADDR, %ebx + jae 1f +#endif + movl $LOAD_PHYSICAL_ADDR, %ebx +1: + + movl %ebx, %ebp // Save the output address for later + /* Target address to relocate to for decompression */ + addl BP_init_size(%esi), %ebx + subl $_end@GOTOFF, %ebx + + /* Set up the stack */ + leal boot_stack_end@GOTOFF(%ebx), %esp + + /* Zero EFLAGS */ + pushl $0 + popfl + +/* + * Copy the compressed kernel to the end of our buffer + * where decompression in place becomes safe. + */ + pushl %esi + leal (_bss@GOTOFF-4)(%edx), %esi + leal (_bss@GOTOFF-4)(%ebx), %edi + movl $(_bss - startup_32), %ecx + shrl $2, %ecx + std + rep movsl + cld + popl %esi + + /* + * The GDT may get overwritten either during the copy we just did or + * during extract_kernel below. To avoid any issues, repoint the GDTR + * to the new copy of the GDT. + */ + leal gdt@GOTOFF(%ebx), %eax + movl %eax, 2(%eax) + lgdt (%eax) + +/* + * Jump to the relocated address. + */ + leal .Lrelocated@GOTOFF(%ebx), %eax + jmp *%eax +SYM_FUNC_END(startup_32) + +#ifdef CONFIG_EFI_STUB +SYM_FUNC_START(efi32_stub_entry) +SYM_FUNC_START_ALIAS(efi_stub_entry) + add $0x4, %esp + movl 8(%esp), %esi /* save boot_params pointer */ + call efi_main + /* efi_main returns the possibly relocated address of startup_32 */ + jmp *%eax +SYM_FUNC_END(efi32_stub_entry) +SYM_FUNC_END_ALIAS(efi_stub_entry) +#endif + + .text +SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated) + +/* + * Clear BSS (stack is currently empty) + */ + xorl %eax, %eax + leal _bss@GOTOFF(%ebx), %edi + leal _ebss@GOTOFF(%ebx), %ecx + subl %edi, %ecx + shrl $2, %ecx + rep stosl + +/* + * Do the extraction, and jump to the new kernel.. + */ + /* push arguments for extract_kernel: */ + + pushl output_len@GOTOFF(%ebx) /* decompressed length, end of relocs */ + pushl %ebp /* output address */ + pushl input_len@GOTOFF(%ebx) /* input_len */ + leal input_data@GOTOFF(%ebx), %eax + pushl %eax /* input_data */ + leal boot_heap@GOTOFF(%ebx), %eax + pushl %eax /* heap area */ + pushl %esi /* real mode pointer */ + call extract_kernel /* returns kernel location in %eax */ + addl $24, %esp + +/* + * Jump to the extracted kernel. + */ + xorl %ebx, %ebx + jmp *%eax +SYM_FUNC_END(.Lrelocated) + + .data + .balign 8 +SYM_DATA_START_LOCAL(gdt) + .word gdt_end - gdt - 1 + .long 0 + .word 0 + .quad 0x0000000000000000 /* Reserved */ + .quad 0x00cf9a000000ffff /* __KERNEL_CS */ + .quad 0x00cf92000000ffff /* __KERNEL_DS */ +SYM_DATA_END_LABEL(gdt, SYM_L_LOCAL, gdt_end) + +#ifdef CONFIG_EFI_STUB +SYM_DATA(image_offset, .long 0) +#endif + +/* + * Stack and heap for uncompression + */ + .bss + .balign 4 +boot_heap: + .fill BOOT_HEAP_SIZE, 1, 0 +boot_stack: + .fill BOOT_STACK_SIZE, 1, 0 +boot_stack_end: diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S new file mode 100644 index 000000000..473d84eb5 --- /dev/null +++ b/arch/x86/boot/compressed/head_64.S @@ -0,0 +1,913 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * linux/boot/head.S + * + * Copyright (C) 1991, 1992, 1993 Linus Torvalds + */ + +/* + * head.S contains the 32-bit startup code. + * + * NOTE!!! Startup happens at absolute address 0x00001000, which is also where + * the page directory will exist. The startup code will be overwritten by + * the page directory. [According to comments etc elsewhere on a compressed + * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC] + * + * Page 0 is deliberately kept safe, since System Management Mode code in + * laptops may need to access the BIOS data stored there. This is also + * useful for future device drivers that either access the BIOS via VM86 + * mode. + */ + +/* + * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 + */ + .code32 + .text + +#include <linux/init.h> +#include <linux/linkage.h> +#include <asm/segment.h> +#include <asm/boot.h> +#include <asm/msr.h> +#include <asm/processor-flags.h> +#include <asm/asm-offsets.h> +#include <asm/bootparam.h> +#include <asm/desc_defs.h> +#include "pgtable.h" + +/* + * Locally defined symbols should be marked hidden: + */ + .hidden _bss + .hidden _ebss + .hidden _end + + __HEAD + +/* + * This macro gives the relative virtual address of X, i.e. the offset of X + * from startup_32. This is the same as the link-time virtual address of X, + * since startup_32 is at 0, but defining it this way tells the + * assembler/linker that we do not want the actual run-time address of X. This + * prevents the linker from trying to create unwanted run-time relocation + * entries for the reference when the compressed kernel is linked as PIE. + * + * A reference X(%reg) will result in the link-time VA of X being stored with + * the instruction, and a run-time R_X86_64_RELATIVE relocation entry that + * adds the 64-bit base address where the kernel is loaded. + * + * Replacing it with (X-startup_32)(%reg) results in the offset being stored, + * and no run-time relocation. + * + * The macro should be used as a displacement with a base register containing + * the run-time address of startup_32 [i.e. rva(X)(%reg)], or as an immediate + * [$ rva(X)]. + * + * This macro can only be used from within the .head.text section, since the + * expression requires startup_32 to be in the same section as the code being + * assembled. + */ +#define rva(X) ((X) - startup_32) + + .code32 +SYM_FUNC_START(startup_32) + /* + * 32bit entry is 0 and it is ABI so immutable! + * If we come here directly from a bootloader, + * kernel(text+data+bss+brk) ramdisk, zero_page, command line + * all need to be under the 4G limit. + */ + cld + cli + +/* + * Calculate the delta between where we were compiled to run + * at and where we were actually loaded at. This can only be done + * with a short local call on x86. Nothing else will tell us what + * address we are running at. The reserved chunk of the real-mode + * data at 0x1e4 (defined as a scratch field) are used as the stack + * for this calculation. Only 4 bytes are needed. + */ + leal (BP_scratch+4)(%esi), %esp + call 1f +1: popl %ebp + subl $ rva(1b), %ebp + + /* Load new GDT with the 64bit segments using 32bit descriptor */ + leal rva(gdt)(%ebp), %eax + movl %eax, 2(%eax) + lgdt (%eax) + + /* Load segment registers with our descriptors */ + movl $__BOOT_DS, %eax + movl %eax, %ds + movl %eax, %es + movl %eax, %fs + movl %eax, %gs + movl %eax, %ss + +/* setup a stack and make sure cpu supports long mode. */ + leal rva(boot_stack_end)(%ebp), %esp + + call verify_cpu + testl %eax, %eax + jnz .Lno_longmode + +/* + * Compute the delta between where we were compiled to run at + * and where the code will actually run at. + * + * %ebp contains the address we are loaded at by the boot loader and %ebx + * contains the address where we should move the kernel image temporarily + * for safe in-place decompression. + */ + +#ifdef CONFIG_RELOCATABLE + movl %ebp, %ebx + +#ifdef CONFIG_EFI_STUB +/* + * If we were loaded via the EFI LoadImage service, startup_32 will be at an + * offset to the start of the space allocated for the image. efi_pe_entry will + * set up image_offset to tell us where the image actually starts, so that we + * can use the full available buffer. + * image_offset = startup_32 - image_base + * Otherwise image_offset will be zero and has no effect on the calculations. + */ + subl rva(image_offset)(%ebp), %ebx +#endif + + movl BP_kernel_alignment(%esi), %eax + decl %eax + addl %eax, %ebx + notl %eax + andl %eax, %ebx + cmpl $LOAD_PHYSICAL_ADDR, %ebx + jae 1f +#endif + movl $LOAD_PHYSICAL_ADDR, %ebx +1: + + /* Target address to relocate to for decompression */ + addl BP_init_size(%esi), %ebx + subl $ rva(_end), %ebx + +/* + * Prepare for entering 64 bit mode + */ + + /* Enable PAE mode */ + movl %cr4, %eax + orl $X86_CR4_PAE, %eax + movl %eax, %cr4 + + /* + * Build early 4G boot pagetable + */ + /* + * If SEV is active then set the encryption mask in the page tables. + * This will insure that when the kernel is copied and decompressed + * it will be done so encrypted. + */ + call get_sev_encryption_bit + xorl %edx, %edx +#ifdef CONFIG_AMD_MEM_ENCRYPT + testl %eax, %eax + jz 1f + subl $32, %eax /* Encryption bit is always above bit 31 */ + bts %eax, %edx /* Set encryption mask for page tables */ + /* + * Mark SEV as active in sev_status so that startup32_check_sev_cbit() + * will do a check. The sev_status memory will be fully initialized + * with the contents of MSR_AMD_SEV_STATUS later in + * set_sev_encryption_mask(). For now it is sufficient to know that SEV + * is active. + */ + movl $1, rva(sev_status)(%ebp) +1: +#endif + + /* Initialize Page tables to 0 */ + leal rva(pgtable)(%ebx), %edi + xorl %eax, %eax + movl $(BOOT_INIT_PGT_SIZE/4), %ecx + rep stosl + + /* Build Level 4 */ + leal rva(pgtable + 0)(%ebx), %edi + leal 0x1007 (%edi), %eax + movl %eax, 0(%edi) + addl %edx, 4(%edi) + + /* Build Level 3 */ + leal rva(pgtable + 0x1000)(%ebx), %edi + leal 0x1007(%edi), %eax + movl $4, %ecx +1: movl %eax, 0x00(%edi) + addl %edx, 0x04(%edi) + addl $0x00001000, %eax + addl $8, %edi + decl %ecx + jnz 1b + + /* Build Level 2 */ + leal rva(pgtable + 0x2000)(%ebx), %edi + movl $0x00000183, %eax + movl $2048, %ecx +1: movl %eax, 0(%edi) + addl %edx, 4(%edi) + addl $0x00200000, %eax + addl $8, %edi + decl %ecx + jnz 1b + + /* Enable the boot page tables */ + leal rva(pgtable)(%ebx), %eax + movl %eax, %cr3 + + /* Enable Long mode in EFER (Extended Feature Enable Register) */ + movl $MSR_EFER, %ecx + rdmsr + btsl $_EFER_LME, %eax + wrmsr + + /* After gdt is loaded */ + xorl %eax, %eax + lldt %ax + movl $__BOOT_TSS, %eax + ltr %ax + + /* + * Setup for the jump to 64bit mode + * + * When the jump is performend we will be in long mode but + * in 32bit compatibility mode with EFER.LME = 1, CS.L = 0, CS.D = 1 + * (and in turn EFER.LMA = 1). To jump into 64bit mode we use + * the new gdt/idt that has __KERNEL_CS with CS.L = 1. + * We place all of the values on our mini stack so lret can + * used to perform that far jump. + */ + leal rva(startup_64)(%ebp), %eax +#ifdef CONFIG_EFI_MIXED + movl rva(efi32_boot_args)(%ebp), %edi + cmp $0, %edi + jz 1f + leal rva(efi64_stub_entry)(%ebp), %eax + movl rva(efi32_boot_args+4)(%ebp), %esi + movl rva(efi32_boot_args+8)(%ebp), %edx // saved bootparams pointer + cmpl $0, %edx + jnz 1f + /* + * efi_pe_entry uses MS calling convention, which requires 32 bytes of + * shadow space on the stack even if all arguments are passed in + * registers. We also need an additional 8 bytes for the space that + * would be occupied by the return address, and this also results in + * the correct stack alignment for entry. + */ + subl $40, %esp + leal rva(efi_pe_entry)(%ebp), %eax + movl %edi, %ecx // MS calling convention + movl %esi, %edx +1: +#endif + /* Check if the C-bit position is correct when SEV is active */ + call startup32_check_sev_cbit + + pushl $__KERNEL_CS + pushl %eax + + /* Enter paged protected Mode, activating Long Mode */ + movl $(X86_CR0_PG | X86_CR0_PE), %eax /* Enable Paging and Protected mode */ + movl %eax, %cr0 + + /* Jump from 32bit compatibility mode into 64bit mode. */ + lret +SYM_FUNC_END(startup_32) + +#ifdef CONFIG_EFI_MIXED + .org 0x190 +SYM_FUNC_START(efi32_stub_entry) + add $0x4, %esp /* Discard return address */ + popl %ecx + popl %edx + popl %esi + + call 1f +1: pop %ebp + subl $ rva(1b), %ebp + + movl %esi, rva(efi32_boot_args+8)(%ebp) +SYM_INNER_LABEL(efi32_pe_stub_entry, SYM_L_LOCAL) + movl %ecx, rva(efi32_boot_args)(%ebp) + movl %edx, rva(efi32_boot_args+4)(%ebp) + movb $0, rva(efi_is64)(%ebp) + + /* Save firmware GDTR and code/data selectors */ + sgdtl rva(efi32_boot_gdt)(%ebp) + movw %cs, rva(efi32_boot_cs)(%ebp) + movw %ds, rva(efi32_boot_ds)(%ebp) + + /* Disable paging */ + movl %cr0, %eax + btrl $X86_CR0_PG_BIT, %eax + movl %eax, %cr0 + + jmp startup_32 +SYM_FUNC_END(efi32_stub_entry) +#endif + + .code64 + .org 0x200 +SYM_CODE_START(startup_64) + /* + * 64bit entry is 0x200 and it is ABI so immutable! + * We come here either from startup_32 or directly from a + * 64bit bootloader. + * If we come here from a bootloader, kernel(text+data+bss+brk), + * ramdisk, zero_page, command line could be above 4G. + * We depend on an identity mapped page table being provided + * that maps our entire kernel(text+data+bss+brk), zero page + * and command line. + */ + + cld + cli + + /* Setup data segments. */ + xorl %eax, %eax + movl %eax, %ds + movl %eax, %es + movl %eax, %ss + movl %eax, %fs + movl %eax, %gs + + /* + * Compute the decompressed kernel start address. It is where + * we were loaded at aligned to a 2M boundary. %rbp contains the + * decompressed kernel start address. + * + * If it is a relocatable kernel then decompress and run the kernel + * from load address aligned to 2MB addr, otherwise decompress and + * run the kernel from LOAD_PHYSICAL_ADDR + * + * We cannot rely on the calculation done in 32-bit mode, since we + * may have been invoked via the 64-bit entry point. + */ + + /* Start with the delta to where the kernel will run at. */ +#ifdef CONFIG_RELOCATABLE + leaq startup_32(%rip) /* - $startup_32 */, %rbp + +#ifdef CONFIG_EFI_STUB +/* + * If we were loaded via the EFI LoadImage service, startup_32 will be at an + * offset to the start of the space allocated for the image. efi_pe_entry will + * set up image_offset to tell us where the image actually starts, so that we + * can use the full available buffer. + * image_offset = startup_32 - image_base + * Otherwise image_offset will be zero and has no effect on the calculations. + */ + movl image_offset(%rip), %eax + subq %rax, %rbp +#endif + + movl BP_kernel_alignment(%rsi), %eax + decl %eax + addq %rax, %rbp + notq %rax + andq %rax, %rbp + cmpq $LOAD_PHYSICAL_ADDR, %rbp + jae 1f +#endif + movq $LOAD_PHYSICAL_ADDR, %rbp +1: + + /* Target address to relocate to for decompression */ + movl BP_init_size(%rsi), %ebx + subl $ rva(_end), %ebx + addq %rbp, %rbx + + /* Set up the stack */ + leaq rva(boot_stack_end)(%rbx), %rsp + + /* + * At this point we are in long mode with 4-level paging enabled, + * but we might want to enable 5-level paging or vice versa. + * + * The problem is that we cannot do it directly. Setting or clearing + * CR4.LA57 in long mode would trigger #GP. So we need to switch off + * long mode and paging first. + * + * We also need a trampoline in lower memory to switch over from + * 4- to 5-level paging for cases when the bootloader puts the kernel + * above 4G, but didn't enable 5-level paging for us. + * + * The same trampoline can be used to switch from 5- to 4-level paging + * mode, like when starting 4-level paging kernel via kexec() when + * original kernel worked in 5-level paging mode. + * + * For the trampoline, we need the top page table to reside in lower + * memory as we don't have a way to load 64-bit values into CR3 in + * 32-bit mode. + * + * We go though the trampoline even if we don't have to: if we're + * already in a desired paging mode. This way the trampoline code gets + * tested on every boot. + */ + + /* Make sure we have GDT with 32-bit code segment */ + leaq gdt64(%rip), %rax + addq %rax, 2(%rax) + lgdt (%rax) + + /* Reload CS so IRET returns to a CS actually in the GDT */ + pushq $__KERNEL_CS + leaq .Lon_kernel_cs(%rip), %rax + pushq %rax + lretq + +.Lon_kernel_cs: + + pushq %rsi + call load_stage1_idt + popq %rsi + + /* + * paging_prepare() sets up the trampoline and checks if we need to + * enable 5-level paging. + * + * paging_prepare() returns a two-quadword structure which lands + * into RDX:RAX: + * - Address of the trampoline is returned in RAX. + * - Non zero RDX means trampoline needs to enable 5-level + * paging. + * + * RSI holds real mode data and needs to be preserved across + * this function call. + */ + pushq %rsi + movq %rsi, %rdi /* real mode address */ + call paging_prepare + popq %rsi + + /* Save the trampoline address in RCX */ + movq %rax, %rcx + + /* Set up 32-bit addressable stack */ + leaq TRAMPOLINE_32BIT_STACK_END(%rcx), %rsp + + /* + * Preserve live 64-bit registers on the stack: this is necessary + * because the architecture does not guarantee that GPRs will retain + * their full 64-bit values across a 32-bit mode switch. + */ + pushq %rbp + pushq %rbx + pushq %rsi + + /* + * Push the 64-bit address of trampoline_return() onto the new stack. + * It will be used by the trampoline to return to the main code. Due to + * the 32-bit mode switch, it cannot be kept it in a register either. + */ + leaq trampoline_return(%rip), %rdi + pushq %rdi + + /* Switch to compatibility mode (CS.L = 0 CS.D = 1) via far return */ + pushq $__KERNEL32_CS + leaq TRAMPOLINE_32BIT_CODE_OFFSET(%rax), %rax + pushq %rax + lretq +trampoline_return: + /* Restore live 64-bit registers */ + popq %rsi + popq %rbx + popq %rbp + + /* Restore the stack, the 32-bit trampoline uses its own stack */ + leaq rva(boot_stack_end)(%rbx), %rsp + + /* + * cleanup_trampoline() would restore trampoline memory. + * + * RDI is address of the page table to use instead of page table + * in trampoline memory (if required). + * + * RSI holds real mode data and needs to be preserved across + * this function call. + */ + pushq %rsi + leaq rva(top_pgtable)(%rbx), %rdi + call cleanup_trampoline + popq %rsi + + /* Zero EFLAGS */ + pushq $0 + popfq + +/* + * Copy the compressed kernel to the end of our buffer + * where decompression in place becomes safe. + */ + pushq %rsi + leaq (_bss-8)(%rip), %rsi + leaq rva(_bss-8)(%rbx), %rdi + movl $(_bss - startup_32), %ecx + shrl $3, %ecx + std + rep movsq + cld + popq %rsi + + /* + * The GDT may get overwritten either during the copy we just did or + * during extract_kernel below. To avoid any issues, repoint the GDTR + * to the new copy of the GDT. + */ + leaq rva(gdt64)(%rbx), %rax + leaq rva(gdt)(%rbx), %rdx + movq %rdx, 2(%rax) + lgdt (%rax) + +/* + * Jump to the relocated address. + */ + leaq rva(.Lrelocated)(%rbx), %rax + jmp *%rax +SYM_CODE_END(startup_64) + +#ifdef CONFIG_EFI_STUB + .org 0x390 +SYM_FUNC_START(efi64_stub_entry) +SYM_FUNC_START_ALIAS(efi_stub_entry) + and $~0xf, %rsp /* realign the stack */ + movq %rdx, %rbx /* save boot_params pointer */ + call efi_main + movq %rbx,%rsi + leaq rva(startup_64)(%rax), %rax + jmp *%rax +SYM_FUNC_END(efi64_stub_entry) +SYM_FUNC_END_ALIAS(efi_stub_entry) +#endif + + .text +SYM_FUNC_START_LOCAL_NOALIGN(.Lrelocated) + +/* + * Clear BSS (stack is currently empty) + */ + xorl %eax, %eax + leaq _bss(%rip), %rdi + leaq _ebss(%rip), %rcx + subq %rdi, %rcx + shrq $3, %rcx + rep stosq + +/* + * If running as an SEV guest, the encryption mask is required in the + * page-table setup code below. When the guest also has SEV-ES enabled + * set_sev_encryption_mask() will cause #VC exceptions, but the stage2 + * handler can't map its GHCB because the page-table is not set up yet. + * So set up the encryption mask here while still on the stage1 #VC + * handler. Then load stage2 IDT and switch to the kernel's own + * page-table. + */ + pushq %rsi + call set_sev_encryption_mask + call load_stage2_idt + + /* Pass boot_params to initialize_identity_maps() */ + movq (%rsp), %rdi + call initialize_identity_maps + popq %rsi + +/* + * Do the extraction, and jump to the new kernel.. + */ + pushq %rsi /* Save the real mode argument */ + movq %rsi, %rdi /* real mode address */ + leaq boot_heap(%rip), %rsi /* malloc area for uncompression */ + leaq input_data(%rip), %rdx /* input_data */ + movl input_len(%rip), %ecx /* input_len */ + movq %rbp, %r8 /* output target address */ + movl output_len(%rip), %r9d /* decompressed length, end of relocs */ + call extract_kernel /* returns kernel location in %rax */ + popq %rsi + +/* + * Jump to the decompressed kernel. + */ + jmp *%rax +SYM_FUNC_END(.Lrelocated) + + .code32 +/* + * This is the 32-bit trampoline that will be copied over to low memory. + * + * Return address is at the top of the stack (might be above 4G). + * ECX contains the base address of the trampoline memory. + * Non zero RDX means trampoline needs to enable 5-level paging. + */ +SYM_CODE_START(trampoline_32bit_src) + /* Set up data and stack segments */ + movl $__KERNEL_DS, %eax + movl %eax, %ds + movl %eax, %ss + + /* Disable paging */ + movl %cr0, %eax + btrl $X86_CR0_PG_BIT, %eax + movl %eax, %cr0 + + /* Check what paging mode we want to be in after the trampoline */ + cmpl $0, %edx + jz 1f + + /* We want 5-level paging: don't touch CR3 if it already points to 5-level page tables */ + movl %cr4, %eax + testl $X86_CR4_LA57, %eax + jnz 3f + jmp 2f +1: + /* We want 4-level paging: don't touch CR3 if it already points to 4-level page tables */ + movl %cr4, %eax + testl $X86_CR4_LA57, %eax + jz 3f +2: + /* Point CR3 to the trampoline's new top level page table */ + leal TRAMPOLINE_32BIT_PGTABLE_OFFSET(%ecx), %eax + movl %eax, %cr3 +3: + /* Set EFER.LME=1 as a precaution in case hypervsior pulls the rug */ + pushl %ecx + pushl %edx + movl $MSR_EFER, %ecx + rdmsr + btsl $_EFER_LME, %eax + wrmsr + popl %edx + popl %ecx + + /* Enable PAE and LA57 (if required) paging modes */ + movl $X86_CR4_PAE, %eax + cmpl $0, %edx + jz 1f + orl $X86_CR4_LA57, %eax +1: + movl %eax, %cr4 + + /* Calculate address of paging_enabled() once we are executing in the trampoline */ + leal .Lpaging_enabled - trampoline_32bit_src + TRAMPOLINE_32BIT_CODE_OFFSET(%ecx), %eax + + /* Prepare the stack for far return to Long Mode */ + pushl $__KERNEL_CS + pushl %eax + + /* Enable paging again */ + movl $(X86_CR0_PG | X86_CR0_PE), %eax + movl %eax, %cr0 + + lret +SYM_CODE_END(trampoline_32bit_src) + + .code64 +SYM_FUNC_START_LOCAL_NOALIGN(.Lpaging_enabled) + /* Return from the trampoline */ + retq +SYM_FUNC_END(.Lpaging_enabled) + + /* + * The trampoline code has a size limit. + * Make sure we fail to compile if the trampoline code grows + * beyond TRAMPOLINE_32BIT_CODE_SIZE bytes. + */ + .org trampoline_32bit_src + TRAMPOLINE_32BIT_CODE_SIZE + + .code32 +SYM_FUNC_START_LOCAL_NOALIGN(.Lno_longmode) + /* This isn't an x86-64 CPU, so hang intentionally, we cannot continue */ +1: + hlt + jmp 1b +SYM_FUNC_END(.Lno_longmode) + +#include "../../kernel/verify_cpu.S" + + .data +SYM_DATA_START_LOCAL(gdt64) + .word gdt_end - gdt - 1 + .quad gdt - gdt64 +SYM_DATA_END(gdt64) + .balign 8 +SYM_DATA_START_LOCAL(gdt) + .word gdt_end - gdt - 1 + .long 0 + .word 0 + .quad 0x00cf9a000000ffff /* __KERNEL32_CS */ + .quad 0x00af9a000000ffff /* __KERNEL_CS */ + .quad 0x00cf92000000ffff /* __KERNEL_DS */ + .quad 0x0080890000000000 /* TS descriptor */ + .quad 0x0000000000000000 /* TS continued */ +SYM_DATA_END_LABEL(gdt, SYM_L_LOCAL, gdt_end) + +SYM_DATA_START(boot_idt_desc) + .word boot_idt_end - boot_idt - 1 + .quad 0 +SYM_DATA_END(boot_idt_desc) + .balign 8 +SYM_DATA_START(boot_idt) + .rept BOOT_IDT_ENTRIES + .quad 0 + .quad 0 + .endr +SYM_DATA_END_LABEL(boot_idt, SYM_L_GLOBAL, boot_idt_end) + +#ifdef CONFIG_EFI_STUB +SYM_DATA(image_offset, .long 0) +#endif +#ifdef CONFIG_EFI_MIXED +SYM_DATA_LOCAL(efi32_boot_args, .long 0, 0, 0) +SYM_DATA(efi_is64, .byte 1) + +#define ST32_boottime 60 // offsetof(efi_system_table_32_t, boottime) +#define BS32_handle_protocol 88 // offsetof(efi_boot_services_32_t, handle_protocol) +#define LI32_image_base 32 // offsetof(efi_loaded_image_32_t, image_base) + + __HEAD + .code32 +SYM_FUNC_START(efi32_pe_entry) +/* + * efi_status_t efi32_pe_entry(efi_handle_t image_handle, + * efi_system_table_32_t *sys_table) + */ + + pushl %ebp + movl %esp, %ebp + pushl %eax // dummy push to allocate loaded_image + + pushl %ebx // save callee-save registers + pushl %edi + + call verify_cpu // check for long mode support + testl %eax, %eax + movl $0x80000003, %eax // EFI_UNSUPPORTED + jnz 2f + + call 1f +1: pop %ebx + subl $ rva(1b), %ebx + + /* Get the loaded image protocol pointer from the image handle */ + leal -4(%ebp), %eax + pushl %eax // &loaded_image + leal rva(loaded_image_proto)(%ebx), %eax + pushl %eax // pass the GUID address + pushl 8(%ebp) // pass the image handle + + /* + * Note the alignment of the stack frame. + * sys_table + * handle <-- 16-byte aligned on entry by ABI + * return address + * frame pointer + * loaded_image <-- local variable + * saved %ebx <-- 16-byte aligned here + * saved %edi + * &loaded_image + * &loaded_image_proto + * handle <-- 16-byte aligned for call to handle_protocol + */ + + movl 12(%ebp), %eax // sys_table + movl ST32_boottime(%eax), %eax // sys_table->boottime + call *BS32_handle_protocol(%eax) // sys_table->boottime->handle_protocol + addl $12, %esp // restore argument space + testl %eax, %eax + jnz 2f + + movl 8(%ebp), %ecx // image_handle + movl 12(%ebp), %edx // sys_table + movl -4(%ebp), %esi // loaded_image + movl LI32_image_base(%esi), %esi // loaded_image->image_base + movl %ebx, %ebp // startup_32 for efi32_pe_stub_entry + /* + * We need to set the image_offset variable here since startup_32() will + * use it before we get to the 64-bit efi_pe_entry() in C code. + */ + subl %esi, %ebx + movl %ebx, rva(image_offset)(%ebp) // save image_offset + jmp efi32_pe_stub_entry + +2: popl %edi // restore callee-save registers + popl %ebx + leave + RET +SYM_FUNC_END(efi32_pe_entry) + + .section ".rodata" + /* EFI loaded image protocol GUID */ + .balign 4 +SYM_DATA_START_LOCAL(loaded_image_proto) + .long 0x5b1b31a1 + .word 0x9562, 0x11d2 + .byte 0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b +SYM_DATA_END(loaded_image_proto) +#endif + +/* + * Check for the correct C-bit position when the startup_32 boot-path is used. + * + * The check makes use of the fact that all memory is encrypted when paging is + * disabled. The function creates 64 bits of random data using the RDRAND + * instruction. RDRAND is mandatory for SEV guests, so always available. If the + * hypervisor violates that the kernel will crash right here. + * + * The 64 bits of random data are stored to a memory location and at the same + * time kept in the %eax and %ebx registers. Since encryption is always active + * when paging is off the random data will be stored encrypted in main memory. + * + * Then paging is enabled. When the C-bit position is correct all memory is + * still mapped encrypted and comparing the register values with memory will + * succeed. An incorrect C-bit position will map all memory unencrypted, so that + * the compare will use the encrypted random data and fail. + */ + __HEAD + .code32 +SYM_FUNC_START(startup32_check_sev_cbit) +#ifdef CONFIG_AMD_MEM_ENCRYPT + pushl %eax + pushl %ebx + pushl %ecx + pushl %edx + + /* Check for non-zero sev_status */ + movl rva(sev_status)(%ebp), %eax + testl %eax, %eax + jz 4f + + /* + * Get two 32-bit random values - Don't bail out if RDRAND fails + * because it is better to prevent forward progress if no random value + * can be gathered. + */ +1: rdrand %eax + jnc 1b +2: rdrand %ebx + jnc 2b + + /* Store to memory and keep it in the registers */ + movl %eax, rva(sev_check_data)(%ebp) + movl %ebx, rva(sev_check_data+4)(%ebp) + + /* Enable paging to see if encryption is active */ + movl %cr0, %edx /* Backup %cr0 in %edx */ + movl $(X86_CR0_PG | X86_CR0_PE), %ecx /* Enable Paging and Protected mode */ + movl %ecx, %cr0 + + cmpl %eax, rva(sev_check_data)(%ebp) + jne 3f + cmpl %ebx, rva(sev_check_data+4)(%ebp) + jne 3f + + movl %edx, %cr0 /* Restore previous %cr0 */ + + jmp 4f + +3: /* Check failed - hlt the machine */ + hlt + jmp 3b + +4: + popl %edx + popl %ecx + popl %ebx + popl %eax +#endif + RET +SYM_FUNC_END(startup32_check_sev_cbit) + +/* + * Stack and heap for uncompression + */ + .bss + .balign 4 +SYM_DATA_LOCAL(boot_heap, .fill BOOT_HEAP_SIZE, 1, 0) + +SYM_DATA_START_LOCAL(boot_stack) + .fill BOOT_STACK_SIZE, 1, 0 + .balign 16 +SYM_DATA_END_LABEL(boot_stack, SYM_L_LOCAL, boot_stack_end) + +/* + * Space for page tables (not in .bss so not zeroed) + */ + .section ".pgtable","aw",@nobits + .balign 4096 +SYM_DATA_LOCAL(pgtable, .fill BOOT_PGT_SIZE, 1, 0) + +/* + * The page table is going to be used instead of page table in the trampoline + * memory. + */ +SYM_DATA_LOCAL(top_pgtable, .fill PAGE_SIZE, 1, 0) diff --git a/arch/x86/boot/compressed/ident_map_64.c b/arch/x86/boot/compressed/ident_map_64.c new file mode 100644 index 000000000..f4a2e6d37 --- /dev/null +++ b/arch/x86/boot/compressed/ident_map_64.c @@ -0,0 +1,369 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * This code is used on x86_64 to create page table identity mappings on + * demand by building up a new set of page tables (or appending to the + * existing ones), and then switching over to them when ready. + * + * Copyright (C) 2015-2016 Yinghai Lu + * Copyright (C) 2016 Kees Cook + */ + +/* + * Since we're dealing with identity mappings, physical and virtual + * addresses are the same, so override these defines which are ultimately + * used by the headers in misc.h. + */ +#define __pa(x) ((unsigned long)(x)) +#define __va(x) ((void *)((unsigned long)(x))) + +/* No PAGE_TABLE_ISOLATION support needed either: */ +#undef CONFIG_PAGE_TABLE_ISOLATION + +#include "error.h" +#include "misc.h" + +/* These actually do the work of building the kernel identity maps. */ +#include <linux/pgtable.h> +#include <asm/cmpxchg.h> +#include <asm/trap_pf.h> +#include <asm/trapnr.h> +#include <asm/init.h> +/* Use the static base for this part of the boot process */ +#undef __PAGE_OFFSET +#define __PAGE_OFFSET __PAGE_OFFSET_BASE +#include "../../mm/ident_map.c" + +#define _SETUP +#include <asm/setup.h> /* For COMMAND_LINE_SIZE */ +#undef _SETUP + +extern unsigned long get_cmd_line_ptr(void); + +/* Used by PAGE_KERN* macros: */ +pteval_t __default_kernel_pte_mask __read_mostly = ~0; + +/* Used to track our page table allocation area. */ +struct alloc_pgt_data { + unsigned char *pgt_buf; + unsigned long pgt_buf_size; + unsigned long pgt_buf_offset; +}; + +/* + * Allocates space for a page table entry, using struct alloc_pgt_data + * above. Besides the local callers, this is used as the allocation + * callback in mapping_info below. + */ +static void *alloc_pgt_page(void *context) +{ + struct alloc_pgt_data *pages = (struct alloc_pgt_data *)context; + unsigned char *entry; + + /* Validate there is space available for a new page. */ + if (pages->pgt_buf_offset >= pages->pgt_buf_size) { + debug_putstr("out of pgt_buf in " __FILE__ "!?\n"); + debug_putaddr(pages->pgt_buf_offset); + debug_putaddr(pages->pgt_buf_size); + return NULL; + } + + /* Consumed more tables than expected? */ + if (pages->pgt_buf_offset == BOOT_PGT_SIZE_WARN) { + debug_putstr("pgt_buf running low in " __FILE__ "\n"); + debug_putstr("Need to raise BOOT_PGT_SIZE?\n"); + debug_putaddr(pages->pgt_buf_offset); + debug_putaddr(pages->pgt_buf_size); + } + + entry = pages->pgt_buf + pages->pgt_buf_offset; + pages->pgt_buf_offset += PAGE_SIZE; + + return entry; +} + +/* Used to track our allocated page tables. */ +static struct alloc_pgt_data pgt_data; + +/* The top level page table entry pointer. */ +static unsigned long top_level_pgt; + +phys_addr_t physical_mask = (1ULL << __PHYSICAL_MASK_SHIFT) - 1; + +/* + * Mapping information structure passed to kernel_ident_mapping_init(). + * Due to relocation, pointers must be assigned at run time not build time. + */ +static struct x86_mapping_info mapping_info; + +/* + * Adds the specified range to the identity mappings. + */ +static void add_identity_map(unsigned long start, unsigned long end) +{ + int ret; + + /* Align boundary to 2M. */ + start = round_down(start, PMD_SIZE); + end = round_up(end, PMD_SIZE); + if (start >= end) + return; + + /* Build the mapping. */ + ret = kernel_ident_mapping_init(&mapping_info, (pgd_t *)top_level_pgt, start, end); + if (ret) + error("Error: kernel_ident_mapping_init() failed\n"); +} + +/* Locates and clears a region for a new top level page table. */ +void initialize_identity_maps(void *rmode) +{ + unsigned long cmdline; + + /* Exclude the encryption mask from __PHYSICAL_MASK */ + physical_mask &= ~sme_me_mask; + + /* Init mapping_info with run-time function/buffer pointers. */ + mapping_info.alloc_pgt_page = alloc_pgt_page; + mapping_info.context = &pgt_data; + mapping_info.page_flag = __PAGE_KERNEL_LARGE_EXEC | sme_me_mask; + mapping_info.kernpg_flag = _KERNPG_TABLE; + + /* + * It should be impossible for this not to already be true, + * but since calling this a second time would rewind the other + * counters, let's just make sure this is reset too. + */ + pgt_data.pgt_buf_offset = 0; + + /* + * If we came here via startup_32(), cr3 will be _pgtable already + * and we must append to the existing area instead of entirely + * overwriting it. + * + * With 5-level paging, we use '_pgtable' to allocate the p4d page table, + * the top-level page table is allocated separately. + * + * p4d_offset(top_level_pgt, 0) would cover both the 4- and 5-level + * cases. On 4-level paging it's equal to 'top_level_pgt'. + */ + top_level_pgt = read_cr3_pa(); + if (p4d_offset((pgd_t *)top_level_pgt, 0) == (p4d_t *)_pgtable) { + pgt_data.pgt_buf = _pgtable + BOOT_INIT_PGT_SIZE; + pgt_data.pgt_buf_size = BOOT_PGT_SIZE - BOOT_INIT_PGT_SIZE; + memset(pgt_data.pgt_buf, 0, pgt_data.pgt_buf_size); + } else { + pgt_data.pgt_buf = _pgtable; + pgt_data.pgt_buf_size = BOOT_PGT_SIZE; + memset(pgt_data.pgt_buf, 0, pgt_data.pgt_buf_size); + top_level_pgt = (unsigned long)alloc_pgt_page(&pgt_data); + } + + /* + * New page-table is set up - map the kernel image, boot_params and the + * command line. The uncompressed kernel requires boot_params and the + * command line to be mapped in the identity mapping. Map them + * explicitly here in case the compressed kernel does not touch them, + * or does not touch all the pages covering them. + */ + add_identity_map((unsigned long)_head, (unsigned long)_end); + boot_params = rmode; + add_identity_map((unsigned long)boot_params, (unsigned long)(boot_params + 1)); + cmdline = get_cmd_line_ptr(); + add_identity_map(cmdline, cmdline + COMMAND_LINE_SIZE); + + /* Load the new page-table. */ + sev_verify_cbit(top_level_pgt); + write_cr3(top_level_pgt); +} + +/* + * This switches the page tables to the new level4 that has been built + * via calls to add_identity_map() above. If booted via startup_32(), + * this is effectively a no-op. + */ +void finalize_identity_maps(void) +{ + write_cr3(top_level_pgt); +} + +static pte_t *split_large_pmd(struct x86_mapping_info *info, + pmd_t *pmdp, unsigned long __address) +{ + unsigned long page_flags; + unsigned long address; + pte_t *pte; + pmd_t pmd; + int i; + + pte = (pte_t *)info->alloc_pgt_page(info->context); + if (!pte) + return NULL; + + address = __address & PMD_MASK; + /* No large page - clear PSE flag */ + page_flags = info->page_flag & ~_PAGE_PSE; + + /* Populate the PTEs */ + for (i = 0; i < PTRS_PER_PMD; i++) { + set_pte(&pte[i], __pte(address | page_flags)); + address += PAGE_SIZE; + } + + /* + * Ideally we need to clear the large PMD first and do a TLB + * flush before we write the new PMD. But the 2M range of the + * PMD might contain the code we execute and/or the stack + * we are on, so we can't do that. But that should be safe here + * because we are going from large to small mappings and we are + * also the only user of the page-table, so there is no chance + * of a TLB multihit. + */ + pmd = __pmd((unsigned long)pte | info->kernpg_flag); + set_pmd(pmdp, pmd); + /* Flush TLB to establish the new PMD */ + write_cr3(top_level_pgt); + + return pte + pte_index(__address); +} + +static void clflush_page(unsigned long address) +{ + unsigned int flush_size; + char *cl, *start, *end; + + /* + * Hardcode cl-size to 64 - CPUID can't be used here because that might + * cause another #VC exception and the GHCB is not ready to use yet. + */ + flush_size = 64; + start = (char *)(address & PAGE_MASK); + end = start + PAGE_SIZE; + + /* + * First make sure there are no pending writes on the cache-lines to + * flush. + */ + asm volatile("mfence" : : : "memory"); + + for (cl = start; cl != end; cl += flush_size) + clflush(cl); +} + +static int set_clr_page_flags(struct x86_mapping_info *info, + unsigned long address, + pteval_t set, pteval_t clr) +{ + pgd_t *pgdp = (pgd_t *)top_level_pgt; + p4d_t *p4dp; + pud_t *pudp; + pmd_t *pmdp; + pte_t *ptep, pte; + + /* + * First make sure there is a PMD mapping for 'address'. + * It should already exist, but keep things generic. + * + * To map the page just read from it and fault it in if there is no + * mapping yet. add_identity_map() can't be called here because that + * would unconditionally map the address on PMD level, destroying any + * PTE-level mappings that might already exist. Use assembly here so + * the access won't be optimized away. + */ + asm volatile("mov %[address], %%r9" + :: [address] "g" (*(unsigned long *)address) + : "r9", "memory"); + + /* + * The page is mapped at least with PMD size - so skip checks and walk + * directly to the PMD. + */ + p4dp = p4d_offset(pgdp, address); + pudp = pud_offset(p4dp, address); + pmdp = pmd_offset(pudp, address); + + if (pmd_large(*pmdp)) + ptep = split_large_pmd(info, pmdp, address); + else + ptep = pte_offset_kernel(pmdp, address); + + if (!ptep) + return -ENOMEM; + + /* + * Changing encryption attributes of a page requires to flush it from + * the caches. + */ + if ((set | clr) & _PAGE_ENC) + clflush_page(address); + + /* Update PTE */ + pte = *ptep; + pte = pte_set_flags(pte, set); + pte = pte_clear_flags(pte, clr); + set_pte(ptep, pte); + + /* Flush TLB after changing encryption attribute */ + write_cr3(top_level_pgt); + + return 0; +} + +int set_page_decrypted(unsigned long address) +{ + return set_clr_page_flags(&mapping_info, address, 0, _PAGE_ENC); +} + +int set_page_encrypted(unsigned long address) +{ + return set_clr_page_flags(&mapping_info, address, _PAGE_ENC, 0); +} + +int set_page_non_present(unsigned long address) +{ + return set_clr_page_flags(&mapping_info, address, 0, _PAGE_PRESENT); +} + +static void do_pf_error(const char *msg, unsigned long error_code, + unsigned long address, unsigned long ip) +{ + error_putstr(msg); + + error_putstr("\nError Code: "); + error_puthex(error_code); + error_putstr("\nCR2: 0x"); + error_puthex(address); + error_putstr("\nRIP relative to _head: 0x"); + error_puthex(ip - (unsigned long)_head); + error_putstr("\n"); + + error("Stopping.\n"); +} + +void do_boot_page_fault(struct pt_regs *regs, unsigned long error_code) +{ + unsigned long address = native_read_cr2(); + unsigned long end; + bool ghcb_fault; + + ghcb_fault = sev_es_check_ghcb_fault(address); + + address &= PMD_MASK; + end = address + PMD_SIZE; + + /* + * Check for unexpected error codes. Unexpected are: + * - Faults on present pages + * - User faults + * - Reserved bits set + */ + if (error_code & (X86_PF_PROT | X86_PF_USER | X86_PF_RSVD)) + do_pf_error("Unexpected page-fault:", error_code, address, regs->ip); + else if (ghcb_fault) + do_pf_error("Page-fault on GHCB page:", error_code, address, regs->ip); + + /* + * Error code is sane - now identity map the 2M region around + * the faulting address. + */ + add_identity_map(address, end); +} diff --git a/arch/x86/boot/compressed/idt_64.c b/arch/x86/boot/compressed/idt_64.c new file mode 100644 index 000000000..804a502ee --- /dev/null +++ b/arch/x86/boot/compressed/idt_64.c @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include <asm/trap_pf.h> +#include <asm/segment.h> +#include <asm/trapnr.h> +#include "misc.h" + +static void set_idt_entry(int vector, void (*handler)(void)) +{ + unsigned long address = (unsigned long)handler; + gate_desc entry; + + memset(&entry, 0, sizeof(entry)); + + entry.offset_low = (u16)(address & 0xffff); + entry.segment = __KERNEL_CS; + entry.bits.type = GATE_TRAP; + entry.bits.p = 1; + entry.offset_middle = (u16)((address >> 16) & 0xffff); + entry.offset_high = (u32)(address >> 32); + + memcpy(&boot_idt[vector], &entry, sizeof(entry)); +} + +/* Have this here so we don't need to include <asm/desc.h> */ +static void load_boot_idt(const struct desc_ptr *dtr) +{ + asm volatile("lidt %0"::"m" (*dtr)); +} + +/* Setup IDT before kernel jumping to .Lrelocated */ +void load_stage1_idt(void) +{ + boot_idt_desc.address = (unsigned long)boot_idt; + + + if (IS_ENABLED(CONFIG_AMD_MEM_ENCRYPT)) + set_idt_entry(X86_TRAP_VC, boot_stage1_vc); + + load_boot_idt(&boot_idt_desc); +} + +/* Setup IDT after kernel jumping to .Lrelocated */ +void load_stage2_idt(void) +{ + boot_idt_desc.address = (unsigned long)boot_idt; + + set_idt_entry(X86_TRAP_PF, boot_page_fault); + +#ifdef CONFIG_AMD_MEM_ENCRYPT + set_idt_entry(X86_TRAP_VC, boot_stage2_vc); +#endif + + load_boot_idt(&boot_idt_desc); +} diff --git a/arch/x86/boot/compressed/idt_handlers_64.S b/arch/x86/boot/compressed/idt_handlers_64.S new file mode 100644 index 000000000..22890e199 --- /dev/null +++ b/arch/x86/boot/compressed/idt_handlers_64.S @@ -0,0 +1,77 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Early IDT handler entry points + * + * Copyright (C) 2019 SUSE + * + * Author: Joerg Roedel <jroedel@suse.de> + */ + +#include <asm/segment.h> + +/* For ORIG_RAX */ +#include "../../entry/calling.h" + +.macro EXCEPTION_HANDLER name function error_code=0 +SYM_FUNC_START(\name) + + /* Build pt_regs */ + .if \error_code == 0 + pushq $0 + .endif + + pushq %rdi + pushq %rsi + pushq %rdx + pushq %rcx + pushq %rax + pushq %r8 + pushq %r9 + pushq %r10 + pushq %r11 + pushq %rbx + pushq %rbp + pushq %r12 + pushq %r13 + pushq %r14 + pushq %r15 + + /* Call handler with pt_regs */ + movq %rsp, %rdi + /* Error code is second parameter */ + movq ORIG_RAX(%rsp), %rsi + call \function + + /* Restore regs */ + popq %r15 + popq %r14 + popq %r13 + popq %r12 + popq %rbp + popq %rbx + popq %r11 + popq %r10 + popq %r9 + popq %r8 + popq %rax + popq %rcx + popq %rdx + popq %rsi + popq %rdi + + /* Remove error code and return */ + addq $8, %rsp + + iretq +SYM_FUNC_END(\name) + .endm + + .text + .code64 + +EXCEPTION_HANDLER boot_page_fault do_boot_page_fault error_code=1 + +#ifdef CONFIG_AMD_MEM_ENCRYPT +EXCEPTION_HANDLER boot_stage1_vc do_vc_no_ghcb error_code=1 +EXCEPTION_HANDLER boot_stage2_vc do_boot_stage2_vc error_code=1 +#endif diff --git a/arch/x86/boot/compressed/kaslr.c b/arch/x86/boot/compressed/kaslr.c new file mode 100644 index 000000000..b92fffbe7 --- /dev/null +++ b/arch/x86/boot/compressed/kaslr.c @@ -0,0 +1,877 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * kaslr.c + * + * This contains the routines needed to generate a reasonable level of + * entropy to choose a randomized kernel base address offset in support + * of Kernel Address Space Layout Randomization (KASLR). Additionally + * handles walking the physical memory maps (and tracking memory regions + * to avoid) in order to select a physical memory location that can + * contain the entire properly aligned running kernel image. + * + */ + +/* + * isspace() in linux/ctype.h is expected by next_args() to filter + * out "space/lf/tab". While boot/ctype.h conflicts with linux/ctype.h, + * since isdigit() is implemented in both of them. Hence disable it + * here. + */ +#define BOOT_CTYPE_H + +#include "misc.h" +#include "error.h" +#include "../string.h" + +#include <generated/compile.h> +#include <linux/module.h> +#include <linux/uts.h> +#include <linux/utsname.h> +#include <linux/ctype.h> +#include <linux/efi.h> +#include <generated/utsrelease.h> +#include <asm/efi.h> + +/* Macros used by the included decompressor code below. */ +#define STATIC +#include <linux/decompress/mm.h> + +#define _SETUP +#include <asm/setup.h> /* For COMMAND_LINE_SIZE */ +#undef _SETUP + +extern unsigned long get_cmd_line_ptr(void); + +/* Simplified build-specific string for starting entropy. */ +static const char build_str[] = UTS_RELEASE " (" LINUX_COMPILE_BY "@" + LINUX_COMPILE_HOST ") (" LINUX_COMPILER ") " UTS_VERSION; + +static unsigned long rotate_xor(unsigned long hash, const void *area, + size_t size) +{ + size_t i; + unsigned long *ptr = (unsigned long *)area; + + for (i = 0; i < size / sizeof(hash); i++) { + /* Rotate by odd number of bits and XOR. */ + hash = (hash << ((sizeof(hash) * 8) - 7)) | (hash >> 7); + hash ^= ptr[i]; + } + + return hash; +} + +/* Attempt to create a simple but unpredictable starting entropy. */ +static unsigned long get_boot_seed(void) +{ + unsigned long hash = 0; + + hash = rotate_xor(hash, build_str, sizeof(build_str)); + hash = rotate_xor(hash, boot_params, sizeof(*boot_params)); + + return hash; +} + +#define KASLR_COMPRESSED_BOOT +#include "../../lib/kaslr.c" + + +/* Only supporting at most 4 unusable memmap regions with kaslr */ +#define MAX_MEMMAP_REGIONS 4 + +static bool memmap_too_large; + + +/* + * Store memory limit: MAXMEM on 64-bit and KERNEL_IMAGE_SIZE on 32-bit. + * It may be reduced by "mem=nn[KMG]" or "memmap=nn[KMG]" command line options. + */ +static u64 mem_limit; + +/* Number of immovable memory regions */ +static int num_immovable_mem; + +enum mem_avoid_index { + MEM_AVOID_ZO_RANGE = 0, + MEM_AVOID_INITRD, + MEM_AVOID_CMDLINE, + MEM_AVOID_BOOTPARAMS, + MEM_AVOID_MEMMAP_BEGIN, + MEM_AVOID_MEMMAP_END = MEM_AVOID_MEMMAP_BEGIN + MAX_MEMMAP_REGIONS - 1, + MEM_AVOID_MAX, +}; + +static struct mem_vector mem_avoid[MEM_AVOID_MAX]; + +static bool mem_overlaps(struct mem_vector *one, struct mem_vector *two) +{ + /* Item one is entirely before item two. */ + if (one->start + one->size <= two->start) + return false; + /* Item one is entirely after item two. */ + if (one->start >= two->start + two->size) + return false; + return true; +} + +char *skip_spaces(const char *str) +{ + while (isspace(*str)) + ++str; + return (char *)str; +} +#include "../../../../lib/ctype.c" +#include "../../../../lib/cmdline.c" + +enum parse_mode { + PARSE_MEMMAP, + PARSE_EFI, +}; + +static int +parse_memmap(char *p, u64 *start, u64 *size, enum parse_mode mode) +{ + char *oldp; + + if (!p) + return -EINVAL; + + /* We don't care about this option here */ + if (!strncmp(p, "exactmap", 8)) + return -EINVAL; + + oldp = p; + *size = memparse(p, &p); + if (p == oldp) + return -EINVAL; + + switch (*p) { + case '#': + case '$': + case '!': + *start = memparse(p + 1, &p); + return 0; + case '@': + if (mode == PARSE_MEMMAP) { + /* + * memmap=nn@ss specifies usable region, should + * be skipped + */ + *size = 0; + } else { + u64 flags; + + /* + * efi_fake_mem=nn@ss:attr the attr specifies + * flags that might imply a soft-reservation. + */ + *start = memparse(p + 1, &p); + if (p && *p == ':') { + p++; + if (kstrtoull(p, 0, &flags) < 0) + *size = 0; + else if (flags & EFI_MEMORY_SP) + return 0; + } + *size = 0; + } + fallthrough; + default: + /* + * If w/o offset, only size specified, memmap=nn[KMG] has the + * same behaviour as mem=nn[KMG]. It limits the max address + * system can use. Region above the limit should be avoided. + */ + *start = 0; + return 0; + } + + return -EINVAL; +} + +static void mem_avoid_memmap(enum parse_mode mode, char *str) +{ + static int i; + + if (i >= MAX_MEMMAP_REGIONS) + return; + + while (str && (i < MAX_MEMMAP_REGIONS)) { + int rc; + u64 start, size; + char *k = strchr(str, ','); + + if (k) + *k++ = 0; + + rc = parse_memmap(str, &start, &size, mode); + if (rc < 0) + break; + str = k; + + if (start == 0) { + /* Store the specified memory limit if size > 0 */ + if (size > 0 && size < mem_limit) + mem_limit = size; + + continue; + } + + mem_avoid[MEM_AVOID_MEMMAP_BEGIN + i].start = start; + mem_avoid[MEM_AVOID_MEMMAP_BEGIN + i].size = size; + i++; + } + + /* More than 4 memmaps, fail kaslr */ + if ((i >= MAX_MEMMAP_REGIONS) && str) + memmap_too_large = true; +} + +/* Store the number of 1GB huge pages which users specified: */ +static unsigned long max_gb_huge_pages; + +static void parse_gb_huge_pages(char *param, char *val) +{ + static bool gbpage_sz; + char *p; + + if (!strcmp(param, "hugepagesz")) { + p = val; + if (memparse(p, &p) != PUD_SIZE) { + gbpage_sz = false; + return; + } + + if (gbpage_sz) + warn("Repeatedly set hugeTLB page size of 1G!\n"); + gbpage_sz = true; + return; + } + + if (!strcmp(param, "hugepages") && gbpage_sz) { + p = val; + max_gb_huge_pages = simple_strtoull(p, &p, 0); + return; + } +} + +static void handle_mem_options(void) +{ + char *args = (char *)get_cmd_line_ptr(); + size_t len; + char *tmp_cmdline; + char *param, *val; + u64 mem_size; + + if (!args) + return; + + len = strnlen(args, COMMAND_LINE_SIZE-1); + tmp_cmdline = malloc(len + 1); + if (!tmp_cmdline) + error("Failed to allocate space for tmp_cmdline"); + + memcpy(tmp_cmdline, args, len); + tmp_cmdline[len] = 0; + args = tmp_cmdline; + + /* Chew leading spaces */ + args = skip_spaces(args); + + while (*args) { + args = next_arg(args, ¶m, &val); + /* Stop at -- */ + if (!val && strcmp(param, "--") == 0) + break; + + if (!strcmp(param, "memmap")) { + mem_avoid_memmap(PARSE_MEMMAP, val); + } else if (IS_ENABLED(CONFIG_X86_64) && strstr(param, "hugepages")) { + parse_gb_huge_pages(param, val); + } else if (!strcmp(param, "mem")) { + char *p = val; + + if (!strcmp(p, "nopentium")) + continue; + mem_size = memparse(p, &p); + if (mem_size == 0) + break; + + if (mem_size < mem_limit) + mem_limit = mem_size; + } else if (!strcmp(param, "efi_fake_mem")) { + mem_avoid_memmap(PARSE_EFI, val); + } + } + + free(tmp_cmdline); + return; +} + +/* + * In theory, KASLR can put the kernel anywhere in the range of [16M, MAXMEM) + * on 64-bit, and [16M, KERNEL_IMAGE_SIZE) on 32-bit. + * + * The mem_avoid array is used to store the ranges that need to be avoided + * when KASLR searches for an appropriate random address. We must avoid any + * regions that are unsafe to overlap with during decompression, and other + * things like the initrd, cmdline and boot_params. This comment seeks to + * explain mem_avoid as clearly as possible since incorrect mem_avoid + * memory ranges lead to really hard to debug boot failures. + * + * The initrd, cmdline, and boot_params are trivial to identify for + * avoiding. They are MEM_AVOID_INITRD, MEM_AVOID_CMDLINE, and + * MEM_AVOID_BOOTPARAMS respectively below. + * + * What is not obvious how to avoid is the range of memory that is used + * during decompression (MEM_AVOID_ZO_RANGE below). This range must cover + * the compressed kernel (ZO) and its run space, which is used to extract + * the uncompressed kernel (VO) and relocs. + * + * ZO's full run size sits against the end of the decompression buffer, so + * we can calculate where text, data, bss, etc of ZO are positioned more + * easily. + * + * For additional background, the decompression calculations can be found + * in header.S, and the memory diagram is based on the one found in misc.c. + * + * The following conditions are already enforced by the image layouts and + * associated code: + * - input + input_size >= output + output_size + * - kernel_total_size <= init_size + * - kernel_total_size <= output_size (see Note below) + * - output + init_size >= output + output_size + * + * (Note that kernel_total_size and output_size have no fundamental + * relationship, but output_size is passed to choose_random_location + * as a maximum of the two. The diagram is showing a case where + * kernel_total_size is larger than output_size, but this case is + * handled by bumping output_size.) + * + * The above conditions can be illustrated by a diagram: + * + * 0 output input input+input_size output+init_size + * | | | | | + * | | | | | + * |-----|--------|--------|--------------|-----------|--|-------------| + * | | | + * | | | + * output+init_size-ZO_INIT_SIZE output+output_size output+kernel_total_size + * + * [output, output+init_size) is the entire memory range used for + * extracting the compressed image. + * + * [output, output+kernel_total_size) is the range needed for the + * uncompressed kernel (VO) and its run size (bss, brk, etc). + * + * [output, output+output_size) is VO plus relocs (i.e. the entire + * uncompressed payload contained by ZO). This is the area of the buffer + * written to during decompression. + * + * [output+init_size-ZO_INIT_SIZE, output+init_size) is the worst-case + * range of the copied ZO and decompression code. (i.e. the range + * covered backwards of size ZO_INIT_SIZE, starting from output+init_size.) + * + * [input, input+input_size) is the original copied compressed image (ZO) + * (i.e. it does not include its run size). This range must be avoided + * because it contains the data used for decompression. + * + * [input+input_size, output+init_size) is [_text, _end) for ZO. This + * range includes ZO's heap and stack, and must be avoided since it + * performs the decompression. + * + * Since the above two ranges need to be avoided and they are adjacent, + * they can be merged, resulting in: [input, output+init_size) which + * becomes the MEM_AVOID_ZO_RANGE below. + */ +static void mem_avoid_init(unsigned long input, unsigned long input_size, + unsigned long output) +{ + unsigned long init_size = boot_params->hdr.init_size; + u64 initrd_start, initrd_size; + unsigned long cmd_line, cmd_line_size; + + /* + * Avoid the region that is unsafe to overlap during + * decompression. + */ + mem_avoid[MEM_AVOID_ZO_RANGE].start = input; + mem_avoid[MEM_AVOID_ZO_RANGE].size = (output + init_size) - input; + + /* Avoid initrd. */ + initrd_start = (u64)boot_params->ext_ramdisk_image << 32; + initrd_start |= boot_params->hdr.ramdisk_image; + initrd_size = (u64)boot_params->ext_ramdisk_size << 32; + initrd_size |= boot_params->hdr.ramdisk_size; + mem_avoid[MEM_AVOID_INITRD].start = initrd_start; + mem_avoid[MEM_AVOID_INITRD].size = initrd_size; + /* No need to set mapping for initrd, it will be handled in VO. */ + + /* Avoid kernel command line. */ + cmd_line = get_cmd_line_ptr(); + /* Calculate size of cmd_line. */ + if (cmd_line) { + cmd_line_size = strnlen((char *)cmd_line, COMMAND_LINE_SIZE-1) + 1; + mem_avoid[MEM_AVOID_CMDLINE].start = cmd_line; + mem_avoid[MEM_AVOID_CMDLINE].size = cmd_line_size; + } + + /* Avoid boot parameters. */ + mem_avoid[MEM_AVOID_BOOTPARAMS].start = (unsigned long)boot_params; + mem_avoid[MEM_AVOID_BOOTPARAMS].size = sizeof(*boot_params); + + /* We don't need to set a mapping for setup_data. */ + + /* Mark the memmap regions we need to avoid */ + handle_mem_options(); + + /* Enumerate the immovable memory regions */ + num_immovable_mem = count_immovable_mem_regions(); +} + +/* + * Does this memory vector overlap a known avoided area? If so, record the + * overlap region with the lowest address. + */ +static bool mem_avoid_overlap(struct mem_vector *img, + struct mem_vector *overlap) +{ + int i; + struct setup_data *ptr; + u64 earliest = img->start + img->size; + bool is_overlapping = false; + + for (i = 0; i < MEM_AVOID_MAX; i++) { + if (mem_overlaps(img, &mem_avoid[i]) && + mem_avoid[i].start < earliest) { + *overlap = mem_avoid[i]; + earliest = overlap->start; + is_overlapping = true; + } + } + + /* Avoid all entries in the setup_data linked list. */ + ptr = (struct setup_data *)(unsigned long)boot_params->hdr.setup_data; + while (ptr) { + struct mem_vector avoid; + + avoid.start = (unsigned long)ptr; + avoid.size = sizeof(*ptr) + ptr->len; + + if (mem_overlaps(img, &avoid) && (avoid.start < earliest)) { + *overlap = avoid; + earliest = overlap->start; + is_overlapping = true; + } + + if (ptr->type == SETUP_INDIRECT && + ((struct setup_indirect *)ptr->data)->type != SETUP_INDIRECT) { + avoid.start = ((struct setup_indirect *)ptr->data)->addr; + avoid.size = ((struct setup_indirect *)ptr->data)->len; + + if (mem_overlaps(img, &avoid) && (avoid.start < earliest)) { + *overlap = avoid; + earliest = overlap->start; + is_overlapping = true; + } + } + + ptr = (struct setup_data *)(unsigned long)ptr->next; + } + + return is_overlapping; +} + +struct slot_area { + u64 addr; + unsigned long num; +}; + +#define MAX_SLOT_AREA 100 + +static struct slot_area slot_areas[MAX_SLOT_AREA]; +static unsigned int slot_area_index; +static unsigned long slot_max; + +static void store_slot_info(struct mem_vector *region, unsigned long image_size) +{ + struct slot_area slot_area; + + if (slot_area_index == MAX_SLOT_AREA) + return; + + slot_area.addr = region->start; + slot_area.num = 1 + (region->size - image_size) / CONFIG_PHYSICAL_ALIGN; + + slot_areas[slot_area_index++] = slot_area; + slot_max += slot_area.num; +} + +/* + * Skip as many 1GB huge pages as possible in the passed region + * according to the number which users specified: + */ +static void +process_gb_huge_pages(struct mem_vector *region, unsigned long image_size) +{ + u64 pud_start, pud_end; + unsigned long gb_huge_pages; + struct mem_vector tmp; + + if (!IS_ENABLED(CONFIG_X86_64) || !max_gb_huge_pages) { + store_slot_info(region, image_size); + return; + } + + /* Are there any 1GB pages in the region? */ + pud_start = ALIGN(region->start, PUD_SIZE); + pud_end = ALIGN_DOWN(region->start + region->size, PUD_SIZE); + + /* No good 1GB huge pages found: */ + if (pud_start >= pud_end) { + store_slot_info(region, image_size); + return; + } + + /* Check if the head part of the region is usable. */ + if (pud_start >= region->start + image_size) { + tmp.start = region->start; + tmp.size = pud_start - region->start; + store_slot_info(&tmp, image_size); + } + + /* Skip the good 1GB pages. */ + gb_huge_pages = (pud_end - pud_start) >> PUD_SHIFT; + if (gb_huge_pages > max_gb_huge_pages) { + pud_end = pud_start + (max_gb_huge_pages << PUD_SHIFT); + max_gb_huge_pages = 0; + } else { + max_gb_huge_pages -= gb_huge_pages; + } + + /* Check if the tail part of the region is usable. */ + if (region->start + region->size >= pud_end + image_size) { + tmp.start = pud_end; + tmp.size = region->start + region->size - pud_end; + store_slot_info(&tmp, image_size); + } +} + +static u64 slots_fetch_random(void) +{ + unsigned long slot; + unsigned int i; + + /* Handle case of no slots stored. */ + if (slot_max == 0) + return 0; + + slot = kaslr_get_random_long("Physical") % slot_max; + + for (i = 0; i < slot_area_index; i++) { + if (slot >= slot_areas[i].num) { + slot -= slot_areas[i].num; + continue; + } + return slot_areas[i].addr + ((u64)slot * CONFIG_PHYSICAL_ALIGN); + } + + if (i == slot_area_index) + debug_putstr("slots_fetch_random() failed!?\n"); + return 0; +} + +static void __process_mem_region(struct mem_vector *entry, + unsigned long minimum, + unsigned long image_size) +{ + struct mem_vector region, overlap; + u64 region_end; + + /* Enforce minimum and memory limit. */ + region.start = max_t(u64, entry->start, minimum); + region_end = min(entry->start + entry->size, mem_limit); + + /* Give up if slot area array is full. */ + while (slot_area_index < MAX_SLOT_AREA) { + /* Potentially raise address to meet alignment needs. */ + region.start = ALIGN(region.start, CONFIG_PHYSICAL_ALIGN); + + /* Did we raise the address above the passed in memory entry? */ + if (region.start > region_end) + return; + + /* Reduce size by any delta from the original address. */ + region.size = region_end - region.start; + + /* Return if region can't contain decompressed kernel */ + if (region.size < image_size) + return; + + /* If nothing overlaps, store the region and return. */ + if (!mem_avoid_overlap(®ion, &overlap)) { + process_gb_huge_pages(®ion, image_size); + return; + } + + /* Store beginning of region if holds at least image_size. */ + if (overlap.start >= region.start + image_size) { + region.size = overlap.start - region.start; + process_gb_huge_pages(®ion, image_size); + } + + /* Clip off the overlapping region and start over. */ + region.start = overlap.start + overlap.size; + } +} + +static bool process_mem_region(struct mem_vector *region, + unsigned long minimum, + unsigned long image_size) +{ + int i; + /* + * If no immovable memory found, or MEMORY_HOTREMOVE disabled, + * use @region directly. + */ + if (!num_immovable_mem) { + __process_mem_region(region, minimum, image_size); + + if (slot_area_index == MAX_SLOT_AREA) { + debug_putstr("Aborted e820/efi memmap scan (slot_areas full)!\n"); + return 1; + } + return 0; + } + +#if defined(CONFIG_MEMORY_HOTREMOVE) && defined(CONFIG_ACPI) + /* + * If immovable memory found, filter the intersection between + * immovable memory and @region. + */ + for (i = 0; i < num_immovable_mem; i++) { + u64 start, end, entry_end, region_end; + struct mem_vector entry; + + if (!mem_overlaps(region, &immovable_mem[i])) + continue; + + start = immovable_mem[i].start; + end = start + immovable_mem[i].size; + region_end = region->start + region->size; + + entry.start = clamp(region->start, start, end); + entry_end = clamp(region_end, start, end); + entry.size = entry_end - entry.start; + + __process_mem_region(&entry, minimum, image_size); + + if (slot_area_index == MAX_SLOT_AREA) { + debug_putstr("Aborted e820/efi memmap scan when walking immovable regions(slot_areas full)!\n"); + return 1; + } + } +#endif + return 0; +} + +#ifdef CONFIG_EFI +/* + * Returns true if we processed the EFI memmap, which we prefer over the E820 + * table if it is available. + */ +static bool +process_efi_entries(unsigned long minimum, unsigned long image_size) +{ + struct efi_info *e = &boot_params->efi_info; + bool efi_mirror_found = false; + struct mem_vector region; + efi_memory_desc_t *md; + unsigned long pmap; + char *signature; + u32 nr_desc; + int i; + + signature = (char *)&e->efi_loader_signature; + if (strncmp(signature, EFI32_LOADER_SIGNATURE, 4) && + strncmp(signature, EFI64_LOADER_SIGNATURE, 4)) + return false; + +#ifdef CONFIG_X86_32 + /* Can't handle data above 4GB at this time */ + if (e->efi_memmap_hi) { + warn("EFI memmap is above 4GB, can't be handled now on x86_32. EFI should be disabled.\n"); + return false; + } + pmap = e->efi_memmap; +#else + pmap = (e->efi_memmap | ((__u64)e->efi_memmap_hi << 32)); +#endif + + nr_desc = e->efi_memmap_size / e->efi_memdesc_size; + for (i = 0; i < nr_desc; i++) { + md = efi_early_memdesc_ptr(pmap, e->efi_memdesc_size, i); + if (md->attribute & EFI_MEMORY_MORE_RELIABLE) { + efi_mirror_found = true; + break; + } + } + + for (i = 0; i < nr_desc; i++) { + md = efi_early_memdesc_ptr(pmap, e->efi_memdesc_size, i); + + /* + * Here we are more conservative in picking free memory than + * the EFI spec allows: + * + * According to the spec, EFI_BOOT_SERVICES_{CODE|DATA} are also + * free memory and thus available to place the kernel image into, + * but in practice there's firmware where using that memory leads + * to crashes. + * + * Only EFI_CONVENTIONAL_MEMORY is guaranteed to be free. + */ + if (md->type != EFI_CONVENTIONAL_MEMORY) + continue; + + if (efi_soft_reserve_enabled() && + (md->attribute & EFI_MEMORY_SP)) + continue; + + if (efi_mirror_found && + !(md->attribute & EFI_MEMORY_MORE_RELIABLE)) + continue; + + region.start = md->phys_addr; + region.size = md->num_pages << EFI_PAGE_SHIFT; + if (process_mem_region(®ion, minimum, image_size)) + break; + } + return true; +} +#else +static inline bool +process_efi_entries(unsigned long minimum, unsigned long image_size) +{ + return false; +} +#endif + +static void process_e820_entries(unsigned long minimum, + unsigned long image_size) +{ + int i; + struct mem_vector region; + struct boot_e820_entry *entry; + + /* Verify potential e820 positions, appending to slots list. */ + for (i = 0; i < boot_params->e820_entries; i++) { + entry = &boot_params->e820_table[i]; + /* Skip non-RAM entries. */ + if (entry->type != E820_TYPE_RAM) + continue; + region.start = entry->addr; + region.size = entry->size; + if (process_mem_region(®ion, minimum, image_size)) + break; + } +} + +static unsigned long find_random_phys_addr(unsigned long minimum, + unsigned long image_size) +{ + u64 phys_addr; + + /* Bail out early if it's impossible to succeed. */ + if (minimum + image_size > mem_limit) + return 0; + + /* Check if we had too many memmaps. */ + if (memmap_too_large) { + debug_putstr("Aborted memory entries scan (more than 4 memmap= args)!\n"); + return 0; + } + + if (!process_efi_entries(minimum, image_size)) + process_e820_entries(minimum, image_size); + + phys_addr = slots_fetch_random(); + + /* Perform a final check to make sure the address is in range. */ + if (phys_addr < minimum || phys_addr + image_size > mem_limit) { + warn("Invalid physical address chosen!\n"); + return 0; + } + + return (unsigned long)phys_addr; +} + +static unsigned long find_random_virt_addr(unsigned long minimum, + unsigned long image_size) +{ + unsigned long slots, random_addr; + + /* + * There are how many CONFIG_PHYSICAL_ALIGN-sized slots + * that can hold image_size within the range of minimum to + * KERNEL_IMAGE_SIZE? + */ + slots = 1 + (KERNEL_IMAGE_SIZE - minimum - image_size) / CONFIG_PHYSICAL_ALIGN; + + random_addr = kaslr_get_random_long("Virtual") % slots; + + return random_addr * CONFIG_PHYSICAL_ALIGN + minimum; +} + +/* + * Since this function examines addresses much more numerically, + * it takes the input and output pointers as 'unsigned long'. + */ +void choose_random_location(unsigned long input, + unsigned long input_size, + unsigned long *output, + unsigned long output_size, + unsigned long *virt_addr) +{ + unsigned long random_addr, min_addr; + + if (cmdline_find_option_bool("nokaslr")) { + warn("KASLR disabled: 'nokaslr' on cmdline."); + return; + } + + boot_params->hdr.loadflags |= KASLR_FLAG; + + if (IS_ENABLED(CONFIG_X86_32)) + mem_limit = KERNEL_IMAGE_SIZE; + else + mem_limit = MAXMEM; + + /* Record the various known unsafe memory ranges. */ + mem_avoid_init(input, input_size, *output); + + /* + * Low end of the randomization range should be the + * smaller of 512M or the initial kernel image + * location: + */ + min_addr = min(*output, 512UL << 20); + /* Make sure minimum is aligned. */ + min_addr = ALIGN(min_addr, CONFIG_PHYSICAL_ALIGN); + + /* Walk available memory entries to find a random address. */ + random_addr = find_random_phys_addr(min_addr, output_size); + if (!random_addr) { + warn("Physical KASLR disabled: no suitable memory region!"); + } else { + /* Update the new physical address location. */ + if (*output != random_addr) + *output = random_addr; + } + + + /* Pick random virtual address starting from LOAD_PHYSICAL_ADDR. */ + if (IS_ENABLED(CONFIG_X86_64)) + random_addr = find_random_virt_addr(LOAD_PHYSICAL_ADDR, output_size); + *virt_addr = random_addr; +} diff --git a/arch/x86/boot/compressed/kernel_info.S b/arch/x86/boot/compressed/kernel_info.S new file mode 100644 index 000000000..f818ee8fb --- /dev/null +++ b/arch/x86/boot/compressed/kernel_info.S @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#include <asm/bootparam.h> + + .section ".rodata.kernel_info", "a" + + .global kernel_info + +kernel_info: + /* Header, Linux top (structure). */ + .ascii "LToP" + /* Size. */ + .long kernel_info_var_len_data - kernel_info + /* Size total. */ + .long kernel_info_end - kernel_info + + /* Maximal allowed type for setup_data and setup_indirect structs. */ + .long SETUP_TYPE_MAX + +kernel_info_var_len_data: + /* Empty for time being... */ +kernel_info_end: diff --git a/arch/x86/boot/compressed/mem_encrypt.S b/arch/x86/boot/compressed/mem_encrypt.S new file mode 100644 index 000000000..484a9c06f --- /dev/null +++ b/arch/x86/boot/compressed/mem_encrypt.S @@ -0,0 +1,112 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * AMD Memory Encryption Support + * + * Copyright (C) 2017 Advanced Micro Devices, Inc. + * + * Author: Tom Lendacky <thomas.lendacky@amd.com> + */ + +#include <linux/linkage.h> + +#include <asm/processor-flags.h> +#include <asm/msr.h> +#include <asm/asm-offsets.h> + + .text + .code32 +SYM_FUNC_START(get_sev_encryption_bit) + xor %eax, %eax + +#ifdef CONFIG_AMD_MEM_ENCRYPT + push %ebx + push %ecx + push %edx + + movl $0x80000000, %eax /* CPUID to check the highest leaf */ + cpuid + cmpl $0x8000001f, %eax /* See if 0x8000001f is available */ + jb .Lno_sev + + /* + * Check for the SEV feature: + * CPUID Fn8000_001F[EAX] - Bit 1 + * CPUID Fn8000_001F[EBX] - Bits 5:0 + * Pagetable bit position used to indicate encryption + */ + movl $0x8000001f, %eax + cpuid + bt $1, %eax /* Check if SEV is available */ + jnc .Lno_sev + + movl $MSR_AMD64_SEV, %ecx /* Read the SEV MSR */ + rdmsr + bt $MSR_AMD64_SEV_ENABLED_BIT, %eax /* Check if SEV is active */ + jnc .Lno_sev + + movl %ebx, %eax + andl $0x3f, %eax /* Return the encryption bit location */ + jmp .Lsev_exit + +.Lno_sev: + xor %eax, %eax + +.Lsev_exit: + pop %edx + pop %ecx + pop %ebx + +#endif /* CONFIG_AMD_MEM_ENCRYPT */ + + RET +SYM_FUNC_END(get_sev_encryption_bit) + + .code64 + +#include "../../kernel/sev_verify_cbit.S" + +SYM_FUNC_START(set_sev_encryption_mask) +#ifdef CONFIG_AMD_MEM_ENCRYPT + push %rbp + push %rdx + + movq %rsp, %rbp /* Save current stack pointer */ + + call get_sev_encryption_bit /* Get the encryption bit position */ + testl %eax, %eax + jz .Lno_sev_mask + + bts %rax, sme_me_mask(%rip) /* Create the encryption mask */ + + /* + * Read MSR_AMD64_SEV again and store it to sev_status. Can't do this in + * get_sev_encryption_bit() because this function is 32-bit code and + * shared between 64-bit and 32-bit boot path. + */ + movl $MSR_AMD64_SEV, %ecx /* Read the SEV MSR */ + rdmsr + + /* Store MSR value in sev_status */ + shlq $32, %rdx + orq %rdx, %rax + movq %rax, sev_status(%rip) + +.Lno_sev_mask: + movq %rbp, %rsp /* Restore original stack pointer */ + + pop %rdx + pop %rbp +#endif + + xor %rax, %rax + RET +SYM_FUNC_END(set_sev_encryption_mask) + + .data + +#ifdef CONFIG_AMD_MEM_ENCRYPT + .balign 8 +SYM_DATA(sme_me_mask, .quad 0) +SYM_DATA(sev_status, .quad 0) +SYM_DATA(sev_check_data, .quad 0) +#endif diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c new file mode 100644 index 000000000..267e7f930 --- /dev/null +++ b/arch/x86/boot/compressed/misc.c @@ -0,0 +1,458 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * misc.c + * + * This is a collection of several routines used to extract the kernel + * which includes KASLR relocation, decompression, ELF parsing, and + * relocation processing. Additionally included are the screen and serial + * output functions and related debugging support functions. + * + * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 + * puts by Nick Holloway 1993, better puts by Martin Mares 1995 + * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 + */ + +#include "misc.h" +#include "error.h" +#include "pgtable.h" +#include "../string.h" +#include "../voffset.h" +#include <asm/bootparam_utils.h> + +/* + * WARNING!! + * This code is compiled with -fPIC and it is relocated dynamically at + * run time, but no relocation processing is performed. This means that + * it is not safe to place pointers in static structures. + */ + +/* Macros used by the included decompressor code below. */ +#define STATIC static + +/* + * Provide definitions of memzero and memmove as some of the decompressors will + * try to define their own functions if these are not defined as macros. + */ +#define memzero(s, n) memset((s), 0, (n)) +#define memmove memmove + +/* Functions used by the included decompressor code below. */ +void *memmove(void *dest, const void *src, size_t n); + +/* + * This is set up by the setup-routine at boot-time + */ +struct boot_params *boot_params; + +memptr free_mem_ptr; +memptr free_mem_end_ptr; + +static char *vidmem; +static int vidport; +static int lines, cols; + +#ifdef CONFIG_KERNEL_GZIP +#include "../../../../lib/decompress_inflate.c" +#endif + +#ifdef CONFIG_KERNEL_BZIP2 +#include "../../../../lib/decompress_bunzip2.c" +#endif + +#ifdef CONFIG_KERNEL_LZMA +#include "../../../../lib/decompress_unlzma.c" +#endif + +#ifdef CONFIG_KERNEL_XZ +#include "../../../../lib/decompress_unxz.c" +#endif + +#ifdef CONFIG_KERNEL_LZO +#include "../../../../lib/decompress_unlzo.c" +#endif + +#ifdef CONFIG_KERNEL_LZ4 +#include "../../../../lib/decompress_unlz4.c" +#endif + +#ifdef CONFIG_KERNEL_ZSTD +#include "../../../../lib/decompress_unzstd.c" +#endif +/* + * NOTE: When adding a new decompressor, please update the analysis in + * ../header.S. + */ + +static void scroll(void) +{ + int i; + + memmove(vidmem, vidmem + cols * 2, (lines - 1) * cols * 2); + for (i = (lines - 1) * cols * 2; i < lines * cols * 2; i += 2) + vidmem[i] = ' '; +} + +#define XMTRDY 0x20 + +#define TXR 0 /* Transmit register (WRITE) */ +#define LSR 5 /* Line Status */ +static void serial_putchar(int ch) +{ + unsigned timeout = 0xffff; + + while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout) + cpu_relax(); + + outb(ch, early_serial_base + TXR); +} + +void __putstr(const char *s) +{ + int x, y, pos; + char c; + + if (early_serial_base) { + const char *str = s; + while (*str) { + if (*str == '\n') + serial_putchar('\r'); + serial_putchar(*str++); + } + } + + if (lines == 0 || cols == 0) + return; + + x = boot_params->screen_info.orig_x; + y = boot_params->screen_info.orig_y; + + while ((c = *s++) != '\0') { + if (c == '\n') { + x = 0; + if (++y >= lines) { + scroll(); + y--; + } + } else { + vidmem[(x + cols * y) * 2] = c; + if (++x >= cols) { + x = 0; + if (++y >= lines) { + scroll(); + y--; + } + } + } + } + + boot_params->screen_info.orig_x = x; + boot_params->screen_info.orig_y = y; + + pos = (x + cols * y) * 2; /* Update cursor position */ + outb(14, vidport); + outb(0xff & (pos >> 9), vidport+1); + outb(15, vidport); + outb(0xff & (pos >> 1), vidport+1); +} + +void __puthex(unsigned long value) +{ + char alpha[2] = "0"; + int bits; + + for (bits = sizeof(value) * 8 - 4; bits >= 0; bits -= 4) { + unsigned long digit = (value >> bits) & 0xf; + + if (digit < 0xA) + alpha[0] = '0' + digit; + else + alpha[0] = 'a' + (digit - 0xA); + + __putstr(alpha); + } +} + +#if CONFIG_X86_NEED_RELOCS +static void handle_relocations(void *output, unsigned long output_len, + unsigned long virt_addr) +{ + int *reloc; + unsigned long delta, map, ptr; + unsigned long min_addr = (unsigned long)output; + unsigned long max_addr = min_addr + (VO___bss_start - VO__text); + + /* + * Calculate the delta between where vmlinux was linked to load + * and where it was actually loaded. + */ + delta = min_addr - LOAD_PHYSICAL_ADDR; + + /* + * The kernel contains a table of relocation addresses. Those + * addresses have the final load address of the kernel in virtual + * memory. We are currently working in the self map. So we need to + * create an adjustment for kernel memory addresses to the self map. + * This will involve subtracting out the base address of the kernel. + */ + map = delta - __START_KERNEL_map; + + /* + * 32-bit always performs relocations. 64-bit relocations are only + * needed if KASLR has chosen a different starting address offset + * from __START_KERNEL_map. + */ + if (IS_ENABLED(CONFIG_X86_64)) + delta = virt_addr - LOAD_PHYSICAL_ADDR; + + if (!delta) { + debug_putstr("No relocation needed... "); + return; + } + debug_putstr("Performing relocations... "); + + /* + * Process relocations: 32 bit relocations first then 64 bit after. + * Three sets of binary relocations are added to the end of the kernel + * before compression. Each relocation table entry is the kernel + * address of the location which needs to be updated stored as a + * 32-bit value which is sign extended to 64 bits. + * + * Format is: + * + * kernel bits... + * 0 - zero terminator for 64 bit relocations + * 64 bit relocation repeated + * 0 - zero terminator for inverse 32 bit relocations + * 32 bit inverse relocation repeated + * 0 - zero terminator for 32 bit relocations + * 32 bit relocation repeated + * + * So we work backwards from the end of the decompressed image. + */ + for (reloc = output + output_len - sizeof(*reloc); *reloc; reloc--) { + long extended = *reloc; + extended += map; + + ptr = (unsigned long)extended; + if (ptr < min_addr || ptr > max_addr) + error("32-bit relocation outside of kernel!\n"); + + *(uint32_t *)ptr += delta; + } +#ifdef CONFIG_X86_64 + while (*--reloc) { + long extended = *reloc; + extended += map; + + ptr = (unsigned long)extended; + if (ptr < min_addr || ptr > max_addr) + error("inverse 32-bit relocation outside of kernel!\n"); + + *(int32_t *)ptr -= delta; + } + for (reloc--; *reloc; reloc--) { + long extended = *reloc; + extended += map; + + ptr = (unsigned long)extended; + if (ptr < min_addr || ptr > max_addr) + error("64-bit relocation outside of kernel!\n"); + + *(uint64_t *)ptr += delta; + } +#endif +} +#else +static inline void handle_relocations(void *output, unsigned long output_len, + unsigned long virt_addr) +{ } +#endif + +static void parse_elf(void *output) +{ +#ifdef CONFIG_X86_64 + Elf64_Ehdr ehdr; + Elf64_Phdr *phdrs, *phdr; +#else + Elf32_Ehdr ehdr; + Elf32_Phdr *phdrs, *phdr; +#endif + void *dest; + int i; + + memcpy(&ehdr, output, sizeof(ehdr)); + if (ehdr.e_ident[EI_MAG0] != ELFMAG0 || + ehdr.e_ident[EI_MAG1] != ELFMAG1 || + ehdr.e_ident[EI_MAG2] != ELFMAG2 || + ehdr.e_ident[EI_MAG3] != ELFMAG3) { + error("Kernel is not a valid ELF file"); + return; + } + + debug_putstr("Parsing ELF... "); + + phdrs = malloc(sizeof(*phdrs) * ehdr.e_phnum); + if (!phdrs) + error("Failed to allocate space for phdrs"); + + memcpy(phdrs, output + ehdr.e_phoff, sizeof(*phdrs) * ehdr.e_phnum); + + for (i = 0; i < ehdr.e_phnum; i++) { + phdr = &phdrs[i]; + + switch (phdr->p_type) { + case PT_LOAD: +#ifdef CONFIG_X86_64 + if ((phdr->p_align % 0x200000) != 0) + error("Alignment of LOAD segment isn't multiple of 2MB"); +#endif +#ifdef CONFIG_RELOCATABLE + dest = output; + dest += (phdr->p_paddr - LOAD_PHYSICAL_ADDR); +#else + dest = (void *)(phdr->p_paddr); +#endif + memmove(dest, output + phdr->p_offset, phdr->p_filesz); + break; + default: /* Ignore other PT_* */ break; + } + } + + free(phdrs); +} + +/* + * The compressed kernel image (ZO), has been moved so that its position + * is against the end of the buffer used to hold the uncompressed kernel + * image (VO) and the execution environment (.bss, .brk), which makes sure + * there is room to do the in-place decompression. (See header.S for the + * calculations.) + * + * |-----compressed kernel image------| + * V V + * 0 extract_offset +INIT_SIZE + * |-----------|---------------|-------------------------|--------| + * | | | | + * VO__text startup_32 of ZO VO__end ZO__end + * ^ ^ + * |-------uncompressed kernel image---------| + * + */ +asmlinkage __visible void *extract_kernel(void *rmode, memptr heap, + unsigned char *input_data, + unsigned long input_len, + unsigned char *output, + unsigned long output_len) +{ + const unsigned long kernel_total_size = VO__end - VO__text; + unsigned long virt_addr = LOAD_PHYSICAL_ADDR; + unsigned long needed_size; + + /* Retain x86 boot parameters pointer passed from startup_32/64. */ + boot_params = rmode; + + /* Clear flags intended for solely in-kernel use. */ + boot_params->hdr.loadflags &= ~KASLR_FLAG; + + sanitize_boot_params(boot_params); + + if (boot_params->screen_info.orig_video_mode == 7) { + vidmem = (char *) 0xb0000; + vidport = 0x3b4; + } else { + vidmem = (char *) 0xb8000; + vidport = 0x3d4; + } + + lines = boot_params->screen_info.orig_video_lines; + cols = boot_params->screen_info.orig_video_cols; + + console_init(); + + /* + * Save RSDP address for later use. Have this after console_init() + * so that early debugging output from the RSDP parsing code can be + * collected. + */ + boot_params->acpi_rsdp_addr = get_rsdp_addr(); + + debug_putstr("early console in extract_kernel\n"); + + free_mem_ptr = heap; /* Heap */ + free_mem_end_ptr = heap + BOOT_HEAP_SIZE; + + /* + * The memory hole needed for the kernel is the larger of either + * the entire decompressed kernel plus relocation table, or the + * entire decompressed kernel plus .bss and .brk sections. + * + * On X86_64, the memory is mapped with PMD pages. Round the + * size up so that the full extent of PMD pages mapped is + * included in the check against the valid memory table + * entries. This ensures the full mapped area is usable RAM + * and doesn't include any reserved areas. + */ + needed_size = max(output_len, kernel_total_size); +#ifdef CONFIG_X86_64 + needed_size = ALIGN(needed_size, MIN_KERNEL_ALIGN); +#endif + + /* Report initial kernel position details. */ + debug_putaddr(input_data); + debug_putaddr(input_len); + debug_putaddr(output); + debug_putaddr(output_len); + debug_putaddr(kernel_total_size); + debug_putaddr(needed_size); + +#ifdef CONFIG_X86_64 + /* Report address of 32-bit trampoline */ + debug_putaddr(trampoline_32bit); +#endif + + choose_random_location((unsigned long)input_data, input_len, + (unsigned long *)&output, + needed_size, + &virt_addr); + + /* Validate memory location choices. */ + if ((unsigned long)output & (MIN_KERNEL_ALIGN - 1)) + error("Destination physical address inappropriately aligned"); + if (virt_addr & (MIN_KERNEL_ALIGN - 1)) + error("Destination virtual address inappropriately aligned"); +#ifdef CONFIG_X86_64 + if (heap > 0x3fffffffffffUL) + error("Destination address too large"); + if (virt_addr + max(output_len, kernel_total_size) > KERNEL_IMAGE_SIZE) + error("Destination virtual address is beyond the kernel mapping area"); +#else + if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff)) + error("Destination address too large"); +#endif +#ifndef CONFIG_RELOCATABLE + if ((unsigned long)output != LOAD_PHYSICAL_ADDR) + error("Destination address does not match LOAD_PHYSICAL_ADDR"); + if (virt_addr != LOAD_PHYSICAL_ADDR) + error("Destination virtual address changed when not relocatable"); +#endif + + debug_putstr("\nDecompressing Linux... "); + __decompress(input_data, input_len, NULL, NULL, output, output_len, + NULL, error); + parse_elf(output); + handle_relocations(output, output_len, virt_addr); + debug_putstr("done.\nBooting the kernel.\n"); + + /* + * Flush GHCB from cache and map it encrypted again when running as + * SEV-ES guest. + */ + sev_es_shutdown_ghcb(); + + return output; +} + +void fortify_panic(const char *name) +{ + error("detected buffer overflow"); +} diff --git a/arch/x86/boot/compressed/misc.h b/arch/x86/boot/compressed/misc.h new file mode 100644 index 000000000..d9a631c59 --- /dev/null +++ b/arch/x86/boot/compressed/misc.h @@ -0,0 +1,164 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef BOOT_COMPRESSED_MISC_H +#define BOOT_COMPRESSED_MISC_H + +/* + * Special hack: we have to be careful, because no indirections are allowed here, + * and paravirt_ops is a kind of one. As it will only run in baremetal anyway, + * we just keep it from happening. (This list needs to be extended when new + * paravirt and debugging variants are added.) + */ +#undef CONFIG_PARAVIRT +#undef CONFIG_PARAVIRT_XXL +#undef CONFIG_PARAVIRT_SPINLOCKS +#undef CONFIG_KASAN + +/* cpu_feature_enabled() cannot be used this early */ +#define USE_EARLY_PGTABLE_L5 + +#include <linux/linkage.h> +#include <linux/screen_info.h> +#include <linux/elf.h> +#include <linux/io.h> +#include <asm/page.h> +#include <asm/boot.h> +#include <asm/bootparam.h> +#include <asm/desc_defs.h> + +#define BOOT_CTYPE_H +#include <linux/acpi.h> + +#define BOOT_BOOT_H +#include "../ctype.h" + +#ifdef CONFIG_X86_64 +#define memptr long +#else +#define memptr unsigned +#endif + +/* boot/compressed/vmlinux start and end markers */ +extern char _head[], _end[]; + +/* misc.c */ +extern memptr free_mem_ptr; +extern memptr free_mem_end_ptr; +extern struct boot_params *boot_params; +void __putstr(const char *s); +void __puthex(unsigned long value); +#define error_putstr(__x) __putstr(__x) +#define error_puthex(__x) __puthex(__x) + +#ifdef CONFIG_X86_VERBOSE_BOOTUP + +#define debug_putstr(__x) __putstr(__x) +#define debug_puthex(__x) __puthex(__x) +#define debug_putaddr(__x) { \ + debug_putstr(#__x ": 0x"); \ + debug_puthex((unsigned long)(__x)); \ + debug_putstr("\n"); \ + } + +#else + +static inline void debug_putstr(const char *s) +{ } +static inline void debug_puthex(unsigned long value) +{ } +#define debug_putaddr(x) /* */ + +#endif + +/* cmdline.c */ +int cmdline_find_option(const char *option, char *buffer, int bufsize); +int cmdline_find_option_bool(const char *option); + +struct mem_vector { + u64 start; + u64 size; +}; + +#if CONFIG_RANDOMIZE_BASE +/* kaslr.c */ +void choose_random_location(unsigned long input, + unsigned long input_size, + unsigned long *output, + unsigned long output_size, + unsigned long *virt_addr); +#else +static inline void choose_random_location(unsigned long input, + unsigned long input_size, + unsigned long *output, + unsigned long output_size, + unsigned long *virt_addr) +{ +} +#endif + +/* cpuflags.c */ +bool has_cpuflag(int flag); + +#ifdef CONFIG_X86_64 +extern int set_page_decrypted(unsigned long address); +extern int set_page_encrypted(unsigned long address); +extern int set_page_non_present(unsigned long address); +extern unsigned char _pgtable[]; +#endif + +#ifdef CONFIG_EARLY_PRINTK +/* early_serial_console.c */ +extern int early_serial_base; +void console_init(void); +#else +static const int early_serial_base; +static inline void console_init(void) +{ } +#endif + +void set_sev_encryption_mask(void); + +#ifdef CONFIG_AMD_MEM_ENCRYPT +void sev_es_shutdown_ghcb(void); +extern bool sev_es_check_ghcb_fault(unsigned long address); +#else +static inline void sev_es_shutdown_ghcb(void) { } +static inline bool sev_es_check_ghcb_fault(unsigned long address) +{ + return false; +} +#endif + +/* acpi.c */ +#ifdef CONFIG_ACPI +acpi_physical_address get_rsdp_addr(void); +#else +static inline acpi_physical_address get_rsdp_addr(void) { return 0; } +#endif + +#if defined(CONFIG_RANDOMIZE_BASE) && defined(CONFIG_MEMORY_HOTREMOVE) && defined(CONFIG_ACPI) +extern struct mem_vector immovable_mem[MAX_NUMNODES*2]; +int count_immovable_mem_regions(void); +#else +static inline int count_immovable_mem_regions(void) { return 0; } +#endif + +/* ident_map_64.c */ +#ifdef CONFIG_X86_5LEVEL +extern unsigned int __pgtable_l5_enabled, pgdir_shift, ptrs_per_p4d; +#endif + +/* Used by PAGE_KERN* macros: */ +extern pteval_t __default_kernel_pte_mask; + +/* idt_64.c */ +extern gate_desc boot_idt[BOOT_IDT_ENTRIES]; +extern struct desc_ptr boot_idt_desc; + +/* IDT Entry Points */ +void boot_page_fault(void); +void boot_stage1_vc(void); +void boot_stage2_vc(void); + +unsigned long sev_verify_cbit(unsigned long cr3); + +#endif /* BOOT_COMPRESSED_MISC_H */ diff --git a/arch/x86/boot/compressed/mkpiggy.c b/arch/x86/boot/compressed/mkpiggy.c new file mode 100644 index 000000000..52aa56cdb --- /dev/null +++ b/arch/x86/boot/compressed/mkpiggy.c @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* ----------------------------------------------------------------------- * + * + * Copyright (C) 2009 Intel Corporation. All rights reserved. + * + * H. Peter Anvin <hpa@linux.intel.com> + * + * ----------------------------------------------------------------------- + * + * Outputs a small assembly wrapper with the appropriate symbols defined. + */ + +#include <stdlib.h> +#include <stdio.h> +#include <string.h> +#include <inttypes.h> +#include <tools/le_byteshift.h> + +int main(int argc, char *argv[]) +{ + uint32_t olen; + long ilen; + FILE *f = NULL; + int retval = 1; + + if (argc < 2) { + fprintf(stderr, "Usage: %s compressed_file\n", argv[0]); + goto bail; + } + + /* Get the information for the compressed kernel image first */ + + f = fopen(argv[1], "r"); + if (!f) { + perror(argv[1]); + goto bail; + } + + + if (fseek(f, -4L, SEEK_END)) { + perror(argv[1]); + } + + if (fread(&olen, sizeof(olen), 1, f) != 1) { + perror(argv[1]); + goto bail; + } + + ilen = ftell(f); + olen = get_unaligned_le32(&olen); + + printf(".section \".rodata..compressed\",\"a\",@progbits\n"); + printf(".globl z_input_len\n"); + printf("z_input_len = %lu\n", ilen); + printf(".globl z_output_len\n"); + printf("z_output_len = %lu\n", (unsigned long)olen); + + printf(".globl input_data, input_data_end\n"); + printf("input_data:\n"); + printf(".incbin \"%s\"\n", argv[1]); + printf("input_data_end:\n"); + + printf(".section \".rodata\",\"a\",@progbits\n"); + printf(".globl input_len\n"); + printf("input_len:\n\t.long %lu\n", ilen); + printf(".globl output_len\n"); + printf("output_len:\n\t.long %lu\n", (unsigned long)olen); + + retval = 0; +bail: + if (f) + fclose(f); + return retval; +} diff --git a/arch/x86/boot/compressed/pgtable.h b/arch/x86/boot/compressed/pgtable.h new file mode 100644 index 000000000..6ff7e81b5 --- /dev/null +++ b/arch/x86/boot/compressed/pgtable.h @@ -0,0 +1,20 @@ +#ifndef BOOT_COMPRESSED_PAGETABLE_H +#define BOOT_COMPRESSED_PAGETABLE_H + +#define TRAMPOLINE_32BIT_SIZE (2 * PAGE_SIZE) + +#define TRAMPOLINE_32BIT_PGTABLE_OFFSET 0 + +#define TRAMPOLINE_32BIT_CODE_OFFSET PAGE_SIZE +#define TRAMPOLINE_32BIT_CODE_SIZE 0x70 + +#define TRAMPOLINE_32BIT_STACK_END TRAMPOLINE_32BIT_SIZE + +#ifndef __ASSEMBLER__ + +extern unsigned long *trampoline_32bit; + +extern void trampoline_32bit_src(void *return_ptr); + +#endif /* __ASSEMBLER__ */ +#endif /* BOOT_COMPRESSED_PAGETABLE_H */ diff --git a/arch/x86/boot/compressed/pgtable_64.c b/arch/x86/boot/compressed/pgtable_64.c new file mode 100644 index 000000000..2a78746f5 --- /dev/null +++ b/arch/x86/boot/compressed/pgtable_64.c @@ -0,0 +1,217 @@ +#include <linux/efi.h> +#include <asm/e820/types.h> +#include <asm/processor.h> +#include <asm/efi.h> +#include "pgtable.h" +#include "../string.h" + +#define BIOS_START_MIN 0x20000U /* 128K, less than this is insane */ +#define BIOS_START_MAX 0x9f000U /* 640K, absolute maximum */ + +#ifdef CONFIG_X86_5LEVEL +/* __pgtable_l5_enabled needs to be in .data to avoid being cleared along with .bss */ +unsigned int __section(".data") __pgtable_l5_enabled; +unsigned int __section(".data") pgdir_shift = 39; +unsigned int __section(".data") ptrs_per_p4d = 1; +#endif + +struct paging_config { + unsigned long trampoline_start; + unsigned long l5_required; +}; + +/* Buffer to preserve trampoline memory */ +static char trampoline_save[TRAMPOLINE_32BIT_SIZE]; + +/* + * Trampoline address will be printed by extract_kernel() for debugging + * purposes. + * + * Avoid putting the pointer into .bss as it will be cleared between + * paging_prepare() and extract_kernel(). + */ +unsigned long *trampoline_32bit __section(".data"); + +extern struct boot_params *boot_params; +int cmdline_find_option_bool(const char *option); + +static unsigned long find_trampoline_placement(void) +{ + unsigned long bios_start = 0, ebda_start = 0; + struct boot_e820_entry *entry; + char *signature; + int i; + + /* + * Find a suitable spot for the trampoline. + * This code is based on reserve_bios_regions(). + */ + + /* + * EFI systems may not provide legacy ROM. The memory may not be mapped + * at all. + * + * Only look for values in the legacy ROM for non-EFI system. + */ + signature = (char *)&boot_params->efi_info.efi_loader_signature; + if (strncmp(signature, EFI32_LOADER_SIGNATURE, 4) && + strncmp(signature, EFI64_LOADER_SIGNATURE, 4)) { + ebda_start = *(unsigned short *)0x40e << 4; + bios_start = *(unsigned short *)0x413 << 10; + } + + if (bios_start < BIOS_START_MIN || bios_start > BIOS_START_MAX) + bios_start = BIOS_START_MAX; + + if (ebda_start > BIOS_START_MIN && ebda_start < bios_start) + bios_start = ebda_start; + + bios_start = round_down(bios_start, PAGE_SIZE); + + /* Find the first usable memory region under bios_start. */ + for (i = boot_params->e820_entries - 1; i >= 0; i--) { + unsigned long new = bios_start; + + entry = &boot_params->e820_table[i]; + + /* Skip all entries above bios_start. */ + if (bios_start <= entry->addr) + continue; + + /* Skip non-RAM entries. */ + if (entry->type != E820_TYPE_RAM) + continue; + + /* Adjust bios_start to the end of the entry if needed. */ + if (bios_start > entry->addr + entry->size) + new = entry->addr + entry->size; + + /* Keep bios_start page-aligned. */ + new = round_down(new, PAGE_SIZE); + + /* Skip the entry if it's too small. */ + if (new - TRAMPOLINE_32BIT_SIZE < entry->addr) + continue; + + /* Protect against underflow. */ + if (new - TRAMPOLINE_32BIT_SIZE > bios_start) + break; + + bios_start = new; + break; + } + + /* Place the trampoline just below the end of low memory */ + return bios_start - TRAMPOLINE_32BIT_SIZE; +} + +struct paging_config paging_prepare(void *rmode) +{ + struct paging_config paging_config = {}; + + /* Initialize boot_params. Required for cmdline_find_option_bool(). */ + boot_params = rmode; + + /* + * Check if LA57 is desired and supported. + * + * There are several parts to the check: + * - if the kernel supports 5-level paging: CONFIG_X86_5LEVEL=y + * - if user asked to disable 5-level paging: no5lvl in cmdline + * - if the machine supports 5-level paging: + * + CPUID leaf 7 is supported + * + the leaf has the feature bit set + * + * That's substitute for boot_cpu_has() in early boot code. + */ + if (IS_ENABLED(CONFIG_X86_5LEVEL) && + !cmdline_find_option_bool("no5lvl") && + native_cpuid_eax(0) >= 7 && + (native_cpuid_ecx(7) & (1 << (X86_FEATURE_LA57 & 31)))) { + paging_config.l5_required = 1; + } + + paging_config.trampoline_start = find_trampoline_placement(); + + trampoline_32bit = (unsigned long *)paging_config.trampoline_start; + + /* Preserve trampoline memory */ + memcpy(trampoline_save, trampoline_32bit, TRAMPOLINE_32BIT_SIZE); + + /* Clear trampoline memory first */ + memset(trampoline_32bit, 0, TRAMPOLINE_32BIT_SIZE); + + /* Copy trampoline code in place */ + memcpy(trampoline_32bit + TRAMPOLINE_32BIT_CODE_OFFSET / sizeof(unsigned long), + &trampoline_32bit_src, TRAMPOLINE_32BIT_CODE_SIZE); + + /* + * The code below prepares page table in trampoline memory. + * + * The new page table will be used by trampoline code for switching + * from 4- to 5-level paging or vice versa. + * + * If switching is not required, the page table is unused: trampoline + * code wouldn't touch CR3. + */ + + /* + * We are not going to use the page table in trampoline memory if we + * are already in the desired paging mode. + */ + if (paging_config.l5_required == !!(native_read_cr4() & X86_CR4_LA57)) + goto out; + + if (paging_config.l5_required) { + /* + * For 4- to 5-level paging transition, set up current CR3 as + * the first and the only entry in a new top-level page table. + */ + trampoline_32bit[TRAMPOLINE_32BIT_PGTABLE_OFFSET] = __native_read_cr3() | _PAGE_TABLE_NOENC; + } else { + unsigned long src; + + /* + * For 5- to 4-level paging transition, copy page table pointed + * by first entry in the current top-level page table as our + * new top-level page table. + * + * We cannot just point to the page table from trampoline as it + * may be above 4G. + */ + src = *(unsigned long *)__native_read_cr3() & PAGE_MASK; + memcpy(trampoline_32bit + TRAMPOLINE_32BIT_PGTABLE_OFFSET / sizeof(unsigned long), + (void *)src, PAGE_SIZE); + } + +out: + return paging_config; +} + +void cleanup_trampoline(void *pgtable) +{ + void *trampoline_pgtable; + + trampoline_pgtable = trampoline_32bit + TRAMPOLINE_32BIT_PGTABLE_OFFSET / sizeof(unsigned long); + + /* + * Move the top level page table out of trampoline memory, + * if it's there. + */ + if ((void *)__native_read_cr3() == trampoline_pgtable) { + memcpy(pgtable, trampoline_pgtable, PAGE_SIZE); + native_write_cr3((unsigned long)pgtable); + } + + /* Restore trampoline memory */ + memcpy(trampoline_32bit, trampoline_save, TRAMPOLINE_32BIT_SIZE); + + /* Initialize variables for 5-level paging */ +#ifdef CONFIG_X86_5LEVEL + if (__read_cr4() & X86_CR4_LA57) { + __pgtable_l5_enabled = 1; + pgdir_shift = 48; + ptrs_per_p4d = 512; + } +#endif +} diff --git a/arch/x86/boot/compressed/sev-es.c b/arch/x86/boot/compressed/sev-es.c new file mode 100644 index 000000000..e23748fa2 --- /dev/null +++ b/arch/x86/boot/compressed/sev-es.c @@ -0,0 +1,223 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * AMD Encrypted Register State Support + * + * Author: Joerg Roedel <jroedel@suse.de> + */ + +/* + * misc.h needs to be first because it knows how to include the other kernel + * headers in the pre-decompression code in a way that does not break + * compilation. + */ +#include "misc.h" + +#include <asm/pgtable_types.h> +#include <asm/sev-es.h> +#include <asm/trapnr.h> +#include <asm/trap_pf.h> +#include <asm/msr-index.h> +#include <asm/fpu/xcr.h> +#include <asm/ptrace.h> +#include <asm/svm.h> + +#include "error.h" + +struct ghcb boot_ghcb_page __aligned(PAGE_SIZE); +struct ghcb *boot_ghcb; + +/* + * Copy a version of this function here - insn-eval.c can't be used in + * pre-decompression code. + */ +static bool insn_has_rep_prefix(struct insn *insn) +{ + insn_byte_t p; + int i; + + insn_get_prefixes(insn); + + for_each_insn_prefix(insn, i, p) { + if (p == 0xf2 || p == 0xf3) + return true; + } + + return false; +} + +/* + * Only a dummy for insn_get_seg_base() - Early boot-code is 64bit only and + * doesn't use segments. + */ +static unsigned long insn_get_seg_base(struct pt_regs *regs, int seg_reg_idx) +{ + return 0UL; +} + +static inline u64 sev_es_rd_ghcb_msr(void) +{ + unsigned long low, high; + + asm volatile("rdmsr" : "=a" (low), "=d" (high) : + "c" (MSR_AMD64_SEV_ES_GHCB)); + + return ((high << 32) | low); +} + +static inline void sev_es_wr_ghcb_msr(u64 val) +{ + u32 low, high; + + low = val & 0xffffffffUL; + high = val >> 32; + + asm volatile("wrmsr" : : "c" (MSR_AMD64_SEV_ES_GHCB), + "a"(low), "d" (high) : "memory"); +} + +static enum es_result vc_decode_insn(struct es_em_ctxt *ctxt) +{ + char buffer[MAX_INSN_SIZE]; + enum es_result ret; + + memcpy(buffer, (unsigned char *)ctxt->regs->ip, MAX_INSN_SIZE); + + insn_init(&ctxt->insn, buffer, MAX_INSN_SIZE, 1); + insn_get_length(&ctxt->insn); + + ret = ctxt->insn.immediate.got ? ES_OK : ES_DECODE_FAILED; + + return ret; +} + +static enum es_result vc_write_mem(struct es_em_ctxt *ctxt, + void *dst, char *buf, size_t size) +{ + memcpy(dst, buf, size); + + return ES_OK; +} + +static enum es_result vc_read_mem(struct es_em_ctxt *ctxt, + void *src, char *buf, size_t size) +{ + memcpy(buf, src, size); + + return ES_OK; +} + +static enum es_result vc_ioio_check(struct es_em_ctxt *ctxt, u16 port, size_t size) +{ + return ES_OK; +} + +static bool fault_in_kernel_space(unsigned long address) +{ + return false; +} + +#undef __init +#undef __pa +#define __init +#define __pa(x) ((unsigned long)(x)) + +#define __BOOT_COMPRESSED + +/* Basic instruction decoding support needed */ +#include "../../lib/inat.c" +#include "../../lib/insn.c" + +/* Include code for early handlers */ +#include "../../kernel/sev-es-shared.c" + +static bool early_setup_sev_es(void) +{ + if (!sev_es_negotiate_protocol()) + sev_es_terminate(GHCB_SEV_ES_REASON_PROTOCOL_UNSUPPORTED); + + if (set_page_decrypted((unsigned long)&boot_ghcb_page)) + return false; + + /* Page is now mapped decrypted, clear it */ + memset(&boot_ghcb_page, 0, sizeof(boot_ghcb_page)); + + boot_ghcb = &boot_ghcb_page; + + /* Initialize lookup tables for the instruction decoder */ + inat_init_tables(); + + return true; +} + +void sev_es_shutdown_ghcb(void) +{ + if (!boot_ghcb) + return; + + if (!sev_es_check_cpu_features()) + error("SEV-ES CPU Features missing."); + + /* + * GHCB Page must be flushed from the cache and mapped encrypted again. + * Otherwise the running kernel will see strange cache effects when + * trying to use that page. + */ + if (set_page_encrypted((unsigned long)&boot_ghcb_page)) + error("Can't map GHCB page encrypted"); + + /* + * GHCB page is mapped encrypted again and flushed from the cache. + * Mark it non-present now to catch bugs when #VC exceptions trigger + * after this point. + */ + if (set_page_non_present((unsigned long)&boot_ghcb_page)) + error("Can't unmap GHCB page"); +} + +bool sev_es_check_ghcb_fault(unsigned long address) +{ + /* Check whether the fault was on the GHCB page */ + return ((address & PAGE_MASK) == (unsigned long)&boot_ghcb_page); +} + +void do_boot_stage2_vc(struct pt_regs *regs, unsigned long exit_code) +{ + struct es_em_ctxt ctxt; + enum es_result result; + + if (!boot_ghcb && !early_setup_sev_es()) + sev_es_terminate(GHCB_SEV_ES_REASON_GENERAL_REQUEST); + + vc_ghcb_invalidate(boot_ghcb); + result = vc_init_em_ctxt(&ctxt, regs, exit_code); + if (result != ES_OK) + goto finish; + + switch (exit_code) { + case SVM_EXIT_RDTSC: + case SVM_EXIT_RDTSCP: + result = vc_handle_rdtsc(boot_ghcb, &ctxt, exit_code); + break; + case SVM_EXIT_IOIO: + result = vc_handle_ioio(boot_ghcb, &ctxt); + break; + case SVM_EXIT_CPUID: + result = vc_handle_cpuid(boot_ghcb, &ctxt); + break; + default: + result = ES_UNSUPPORTED; + break; + } + +finish: + if (result == ES_OK) { + vc_finish_insn(&ctxt); + } else if (result != ES_RETRY) { + /* + * For now, just halt the machine. That makes debugging easier, + * later we just call sev_es_terminate() here. + */ + while (true) + asm volatile("hlt\n"); + } +} diff --git a/arch/x86/boot/compressed/string.c b/arch/x86/boot/compressed/string.c new file mode 100644 index 000000000..81fc1eaa3 --- /dev/null +++ b/arch/x86/boot/compressed/string.c @@ -0,0 +1,81 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * This provides an optimized implementation of memcpy, and a simplified + * implementation of memset and memmove. These are used here because the + * standard kernel runtime versions are not yet available and we don't + * trust the gcc built-in implementations as they may do unexpected things + * (e.g. FPU ops) in the minimal decompression stub execution environment. + */ +#include "error.h" + +#include "../string.c" + +#ifdef CONFIG_X86_32 +static void *____memcpy(void *dest, const void *src, size_t n) +{ + int d0, d1, d2; + asm volatile( + "rep ; movsl\n\t" + "movl %4,%%ecx\n\t" + "rep ; movsb\n\t" + : "=&c" (d0), "=&D" (d1), "=&S" (d2) + : "0" (n >> 2), "g" (n & 3), "1" (dest), "2" (src) + : "memory"); + + return dest; +} +#else +static void *____memcpy(void *dest, const void *src, size_t n) +{ + long d0, d1, d2; + asm volatile( + "rep ; movsq\n\t" + "movq %4,%%rcx\n\t" + "rep ; movsb\n\t" + : "=&c" (d0), "=&D" (d1), "=&S" (d2) + : "0" (n >> 3), "g" (n & 7), "1" (dest), "2" (src) + : "memory"); + + return dest; +} +#endif + +void *memset(void *s, int c, size_t n) +{ + int i; + char *ss = s; + + for (i = 0; i < n; i++) + ss[i] = c; + return s; +} + +void *memmove(void *dest, const void *src, size_t n) +{ + unsigned char *d = dest; + const unsigned char *s = src; + + if (d <= s || d - s >= n) + return ____memcpy(dest, src, n); + + while (n-- > 0) + d[n] = s[n]; + + return dest; +} + +/* Detect and warn about potential overlaps, but handle them with memmove. */ +void *memcpy(void *dest, const void *src, size_t n) +{ + if (dest > src && dest - src < n) { + warn("Avoiding potentially unsafe overlapping memcpy()!"); + return memmove(dest, src, n); + } + return ____memcpy(dest, src, n); +} + +#ifdef CONFIG_KASAN +extern void *__memset(void *s, int c, size_t n) __alias(memset); +extern void *__memmove(void *dest, const void *src, size_t n) __alias(memmove); +extern void *__memcpy(void *dest, const void *src, size_t n) __alias(memcpy); +#endif diff --git a/arch/x86/boot/compressed/vmlinux.lds.S b/arch/x86/boot/compressed/vmlinux.lds.S new file mode 100644 index 000000000..112b2375d --- /dev/null +++ b/arch/x86/boot/compressed/vmlinux.lds.S @@ -0,0 +1,117 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#include <asm-generic/vmlinux.lds.h> + +OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT) + +#undef i386 + +#include <asm/cache.h> +#include <asm/page_types.h> + +#ifdef CONFIG_X86_64 +OUTPUT_ARCH(i386:x86-64) +ENTRY(startup_64) +#else +OUTPUT_ARCH(i386) +ENTRY(startup_32) +#endif + +SECTIONS +{ + /* Be careful parts of head_64.S assume startup_32 is at + * address 0. + */ + . = 0; + .head.text : { + _head = . ; + HEAD_TEXT + _ehead = . ; + } + .rodata..compressed : { + *(.rodata..compressed) + } + .text : { + _text = .; /* Text */ + *(.text) + *(.text.*) + _etext = . ; + } + .rodata : { + _rodata = . ; + *(.rodata) /* read-only data */ + *(.rodata.*) + _erodata = . ; + } + .data : { + _data = . ; + *(.data) + *(.data.*) + *(.bss.efistub) + _edata = . ; + } + . = ALIGN(L1_CACHE_BYTES); + .bss : { + _bss = . ; + *(.bss) + *(.bss.*) + *(COMMON) + . = ALIGN(8); /* For convenience during zeroing */ + _ebss = .; + } +#ifdef CONFIG_X86_64 + . = ALIGN(PAGE_SIZE); + .pgtable : { + _pgtable = . ; + *(.pgtable) + _epgtable = . ; + } +#endif + . = ALIGN(PAGE_SIZE); /* keep ZO size page aligned */ + _end = .; + + STABS_DEBUG + DWARF_DEBUG + ELF_DETAILS + + DISCARDS + /DISCARD/ : { + *(.dynamic) *(.dynsym) *(.dynstr) *(.dynbss) + *(.hash) *(.gnu.hash) + *(.note.*) + } + + .got.plt (INFO) : { + *(.got.plt) + } + ASSERT(SIZEOF(.got.plt) == 0 || +#ifdef CONFIG_X86_64 + SIZEOF(.got.plt) == 0x18, +#else + SIZEOF(.got.plt) == 0xc, +#endif + "Unexpected GOT/PLT entries detected!") + + /* + * Sections that should stay zero sized, which is safer to + * explicitly check instead of blindly discarding. + */ + .got : { + *(.got) + } + ASSERT(SIZEOF(.got) == 0, "Unexpected GOT entries detected!") + + .plt : { + *(.plt) *(.plt.*) + } + ASSERT(SIZEOF(.plt) == 0, "Unexpected run-time procedure linkages detected!") + + .rel.dyn : { + *(.rel.*) *(.rel_*) + } + ASSERT(SIZEOF(.rel.dyn) == 0, "Unexpected run-time relocations (.rel) detected!") + + .rela.dyn : { + *(.rela.*) *(.rela_*) + } + ASSERT(SIZEOF(.rela.dyn) == 0, "Unexpected run-time relocations (.rela) detected!") +} diff --git a/arch/x86/boot/copy.S b/arch/x86/boot/copy.S new file mode 100644 index 000000000..6afd05e81 --- /dev/null +++ b/arch/x86/boot/copy.S @@ -0,0 +1,65 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* ----------------------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * ----------------------------------------------------------------------- */ + +#include <linux/linkage.h> + +/* + * Memory copy routines + */ + + .code16 + .text + +SYM_FUNC_START_NOALIGN(memcpy) + pushw %si + pushw %di + movw %ax, %di + movw %dx, %si + pushw %cx + shrw $2, %cx + rep; movsl + popw %cx + andw $3, %cx + rep; movsb + popw %di + popw %si + retl +SYM_FUNC_END(memcpy) + +SYM_FUNC_START_NOALIGN(memset) + pushw %di + movw %ax, %di + movzbl %dl, %eax + imull $0x01010101,%eax + pushw %cx + shrw $2, %cx + rep; stosl + popw %cx + andw $3, %cx + rep; stosb + popw %di + retl +SYM_FUNC_END(memset) + +SYM_FUNC_START_NOALIGN(copy_from_fs) + pushw %ds + pushw %fs + popw %ds + calll memcpy + popw %ds + retl +SYM_FUNC_END(copy_from_fs) + +SYM_FUNC_START_NOALIGN(copy_to_fs) + pushw %es + pushw %fs + popw %es + calll memcpy + popw %es + retl +SYM_FUNC_END(copy_to_fs) diff --git a/arch/x86/boot/cpu.c b/arch/x86/boot/cpu.c new file mode 100644 index 000000000..0bbf4f370 --- /dev/null +++ b/arch/x86/boot/cpu.c @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007-2008 rPath, Inc. - All Rights Reserved + * + * ----------------------------------------------------------------------- */ + +/* + * arch/x86/boot/cpu.c + * + * Check for obligatory CPU features and abort if the features are not + * present. + */ + +#include "boot.h" +#ifdef CONFIG_X86_FEATURE_NAMES +#include "cpustr.h" +#endif + +static char *cpu_name(int level) +{ + static char buf[6]; + + if (level == 64) { + return "x86-64"; + } else { + if (level == 15) + level = 6; + sprintf(buf, "i%d86", level); + return buf; + } +} + +static void show_cap_strs(u32 *err_flags) +{ + int i, j; +#ifdef CONFIG_X86_FEATURE_NAMES + const unsigned char *msg_strs = (const unsigned char *)x86_cap_strs; + for (i = 0; i < NCAPINTS; i++) { + u32 e = err_flags[i]; + for (j = 0; j < 32; j++) { + if (msg_strs[0] < i || + (msg_strs[0] == i && msg_strs[1] < j)) { + /* Skip to the next string */ + msg_strs += 2; + while (*msg_strs++) + ; + } + if (e & 1) { + if (msg_strs[0] == i && + msg_strs[1] == j && + msg_strs[2]) + printf("%s ", msg_strs+2); + else + printf("%d:%d ", i, j); + } + e >>= 1; + } + } +#else + for (i = 0; i < NCAPINTS; i++) { + u32 e = err_flags[i]; + for (j = 0; j < 32; j++) { + if (e & 1) + printf("%d:%d ", i, j); + e >>= 1; + } + } +#endif +} + +int validate_cpu(void) +{ + u32 *err_flags; + int cpu_level, req_level; + + check_cpu(&cpu_level, &req_level, &err_flags); + + if (cpu_level < req_level) { + printf("This kernel requires an %s CPU, ", + cpu_name(req_level)); + printf("but only detected an %s CPU.\n", + cpu_name(cpu_level)); + return -1; + } + + if (err_flags) { + puts("This kernel requires the following features " + "not present on the CPU:\n"); + show_cap_strs(err_flags); + putchar('\n'); + return -1; + } else if (check_knl_erratum()) { + return -1; + } else { + return 0; + } +} diff --git a/arch/x86/boot/cpucheck.c b/arch/x86/boot/cpucheck.c new file mode 100644 index 000000000..e1478d32d --- /dev/null +++ b/arch/x86/boot/cpucheck.c @@ -0,0 +1,227 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * ----------------------------------------------------------------------- */ + +/* + * Check for obligatory CPU features and abort if the features are not + * present. This code should be compilable as 16-, 32- or 64-bit + * code, so be very careful with types and inline assembly. + * + * This code should not contain any messages; that requires an + * additional wrapper. + * + * As written, this code is not safe for inclusion into the kernel + * proper (after FPU initialization, in particular). + */ + +#ifdef _SETUP +# include "boot.h" +#endif +#include <linux/types.h> +#include <asm/intel-family.h> +#include <asm/processor-flags.h> +#include <asm/required-features.h> +#include <asm/msr-index.h> +#include "string.h" + +static u32 err_flags[NCAPINTS]; + +static const int req_level = CONFIG_X86_MINIMUM_CPU_FAMILY; + +static const u32 req_flags[NCAPINTS] = +{ + REQUIRED_MASK0, + REQUIRED_MASK1, + 0, /* REQUIRED_MASK2 not implemented in this file */ + 0, /* REQUIRED_MASK3 not implemented in this file */ + REQUIRED_MASK4, + 0, /* REQUIRED_MASK5 not implemented in this file */ + REQUIRED_MASK6, + 0, /* REQUIRED_MASK7 not implemented in this file */ + 0, /* REQUIRED_MASK8 not implemented in this file */ + 0, /* REQUIRED_MASK9 not implemented in this file */ + 0, /* REQUIRED_MASK10 not implemented in this file */ + 0, /* REQUIRED_MASK11 not implemented in this file */ + 0, /* REQUIRED_MASK12 not implemented in this file */ + 0, /* REQUIRED_MASK13 not implemented in this file */ + 0, /* REQUIRED_MASK14 not implemented in this file */ + 0, /* REQUIRED_MASK15 not implemented in this file */ + REQUIRED_MASK16, +}; + +#define A32(a, b, c, d) (((d) << 24)+((c) << 16)+((b) << 8)+(a)) + +static int is_amd(void) +{ + return cpu_vendor[0] == A32('A', 'u', 't', 'h') && + cpu_vendor[1] == A32('e', 'n', 't', 'i') && + cpu_vendor[2] == A32('c', 'A', 'M', 'D'); +} + +static int is_centaur(void) +{ + return cpu_vendor[0] == A32('C', 'e', 'n', 't') && + cpu_vendor[1] == A32('a', 'u', 'r', 'H') && + cpu_vendor[2] == A32('a', 'u', 'l', 's'); +} + +static int is_transmeta(void) +{ + return cpu_vendor[0] == A32('G', 'e', 'n', 'u') && + cpu_vendor[1] == A32('i', 'n', 'e', 'T') && + cpu_vendor[2] == A32('M', 'x', '8', '6'); +} + +static int is_intel(void) +{ + return cpu_vendor[0] == A32('G', 'e', 'n', 'u') && + cpu_vendor[1] == A32('i', 'n', 'e', 'I') && + cpu_vendor[2] == A32('n', 't', 'e', 'l'); +} + +/* Returns a bitmask of which words we have error bits in */ +static int check_cpuflags(void) +{ + u32 err; + int i; + + err = 0; + for (i = 0; i < NCAPINTS; i++) { + err_flags[i] = req_flags[i] & ~cpu.flags[i]; + if (err_flags[i]) + err |= 1 << i; + } + + return err; +} + +/* + * Returns -1 on error. + * + * *cpu_level is set to the current CPU level; *req_level to the required + * level. x86-64 is considered level 64 for this purpose. + * + * *err_flags_ptr is set to the flags error array if there are flags missing. + */ +int check_cpu(int *cpu_level_ptr, int *req_level_ptr, u32 **err_flags_ptr) +{ + int err; + + memset(&cpu.flags, 0, sizeof(cpu.flags)); + cpu.level = 3; + + if (has_eflag(X86_EFLAGS_AC)) + cpu.level = 4; + + get_cpuflags(); + err = check_cpuflags(); + + if (test_bit(X86_FEATURE_LM, cpu.flags)) + cpu.level = 64; + + if (err == 0x01 && + !(err_flags[0] & + ~((1 << X86_FEATURE_XMM)|(1 << X86_FEATURE_XMM2))) && + is_amd()) { + /* If this is an AMD and we're only missing SSE+SSE2, try to + turn them on */ + + u32 ecx = MSR_K7_HWCR; + u32 eax, edx; + + asm("rdmsr" : "=a" (eax), "=d" (edx) : "c" (ecx)); + eax &= ~(1 << 15); + asm("wrmsr" : : "a" (eax), "d" (edx), "c" (ecx)); + + get_cpuflags(); /* Make sure it really did something */ + err = check_cpuflags(); + } else if (err == 0x01 && + !(err_flags[0] & ~(1 << X86_FEATURE_CX8)) && + is_centaur() && cpu.model >= 6) { + /* If this is a VIA C3, we might have to enable CX8 + explicitly */ + + u32 ecx = MSR_VIA_FCR; + u32 eax, edx; + + asm("rdmsr" : "=a" (eax), "=d" (edx) : "c" (ecx)); + eax |= (1<<1)|(1<<7); + asm("wrmsr" : : "a" (eax), "d" (edx), "c" (ecx)); + + set_bit(X86_FEATURE_CX8, cpu.flags); + err = check_cpuflags(); + } else if (err == 0x01 && is_transmeta()) { + /* Transmeta might have masked feature bits in word 0 */ + + u32 ecx = 0x80860004; + u32 eax, edx; + u32 level = 1; + + asm("rdmsr" : "=a" (eax), "=d" (edx) : "c" (ecx)); + asm("wrmsr" : : "a" (~0), "d" (edx), "c" (ecx)); + asm("cpuid" + : "+a" (level), "=d" (cpu.flags[0]) + : : "ecx", "ebx"); + asm("wrmsr" : : "a" (eax), "d" (edx), "c" (ecx)); + + err = check_cpuflags(); + } else if (err == 0x01 && + !(err_flags[0] & ~(1 << X86_FEATURE_PAE)) && + is_intel() && cpu.level == 6 && + (cpu.model == 9 || cpu.model == 13)) { + /* PAE is disabled on this Pentium M but can be forced */ + if (cmdline_find_option_bool("forcepae")) { + puts("WARNING: Forcing PAE in CPU flags\n"); + set_bit(X86_FEATURE_PAE, cpu.flags); + err = check_cpuflags(); + } + else { + puts("WARNING: PAE disabled. Use parameter 'forcepae' to enable at your own risk!\n"); + } + } + if (!err) + err = check_knl_erratum(); + + if (err_flags_ptr) + *err_flags_ptr = err ? err_flags : NULL; + if (cpu_level_ptr) + *cpu_level_ptr = cpu.level; + if (req_level_ptr) + *req_level_ptr = req_level; + + return (cpu.level < req_level || err) ? -1 : 0; +} + +int check_knl_erratum(void) +{ + /* + * First check for the affected model/family: + */ + if (!is_intel() || + cpu.family != 6 || + cpu.model != INTEL_FAM6_XEON_PHI_KNL) + return 0; + + /* + * This erratum affects the Accessed/Dirty bits, and can + * cause stray bits to be set in !Present PTEs. We have + * enough bits in our 64-bit PTEs (which we have on real + * 64-bit mode or PAE) to avoid using these troublesome + * bits. But, we do not have enough space in our 32-bit + * PTEs. So, refuse to run on 32-bit non-PAE kernels. + */ + if (IS_ENABLED(CONFIG_X86_64) || IS_ENABLED(CONFIG_X86_PAE)) + return 0; + + puts("This 32-bit kernel can not run on this Xeon Phi x200\n" + "processor due to a processor erratum. Use a 64-bit\n" + "kernel, or enable PAE in this 32-bit kernel.\n\n"); + + return -1; +} + + diff --git a/arch/x86/boot/cpuflags.c b/arch/x86/boot/cpuflags.c new file mode 100644 index 000000000..a0b75f73d --- /dev/null +++ b/arch/x86/boot/cpuflags.c @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/types.h> +#include "bitops.h" + +#include <asm/processor-flags.h> +#include <asm/required-features.h> +#include <asm/msr-index.h> +#include "cpuflags.h" + +struct cpu_features cpu; +u32 cpu_vendor[3]; + +static bool loaded_flags; + +static int has_fpu(void) +{ + u16 fcw = -1, fsw = -1; + unsigned long cr0; + + asm volatile("mov %%cr0,%0" : "=r" (cr0)); + if (cr0 & (X86_CR0_EM|X86_CR0_TS)) { + cr0 &= ~(X86_CR0_EM|X86_CR0_TS); + asm volatile("mov %0,%%cr0" : : "r" (cr0)); + } + + asm volatile("fninit ; fnstsw %0 ; fnstcw %1" + : "+m" (fsw), "+m" (fcw)); + + return fsw == 0 && (fcw & 0x103f) == 0x003f; +} + +/* + * For building the 16-bit code we want to explicitly specify 32-bit + * push/pop operations, rather than just saying 'pushf' or 'popf' and + * letting the compiler choose. But this is also included from the + * compressed/ directory where it may be 64-bit code, and thus needs + * to be 'pushfq' or 'popfq' in that case. + */ +#ifdef __x86_64__ +#define PUSHF "pushfq" +#define POPF "popfq" +#else +#define PUSHF "pushfl" +#define POPF "popfl" +#endif + +int has_eflag(unsigned long mask) +{ + unsigned long f0, f1; + + asm volatile(PUSHF " \n\t" + PUSHF " \n\t" + "pop %0 \n\t" + "mov %0,%1 \n\t" + "xor %2,%1 \n\t" + "push %1 \n\t" + POPF " \n\t" + PUSHF " \n\t" + "pop %1 \n\t" + POPF + : "=&r" (f0), "=&r" (f1) + : "ri" (mask)); + + return !!((f0^f1) & mask); +} + +/* Handle x86_32 PIC using ebx. */ +#if defined(__i386__) && defined(__PIC__) +# define EBX_REG "=r" +#else +# define EBX_REG "=b" +#endif + +static inline void cpuid_count(u32 id, u32 count, + u32 *a, u32 *b, u32 *c, u32 *d) +{ + asm volatile(".ifnc %%ebx,%3 ; movl %%ebx,%3 ; .endif \n\t" + "cpuid \n\t" + ".ifnc %%ebx,%3 ; xchgl %%ebx,%3 ; .endif \n\t" + : "=a" (*a), "=c" (*c), "=d" (*d), EBX_REG (*b) + : "a" (id), "c" (count) + ); +} + +#define cpuid(id, a, b, c, d) cpuid_count(id, 0, a, b, c, d) + +void get_cpuflags(void) +{ + u32 max_intel_level, max_amd_level; + u32 tfms; + u32 ignored; + + if (loaded_flags) + return; + loaded_flags = true; + + if (has_fpu()) + set_bit(X86_FEATURE_FPU, cpu.flags); + + if (has_eflag(X86_EFLAGS_ID)) { + cpuid(0x0, &max_intel_level, &cpu_vendor[0], &cpu_vendor[2], + &cpu_vendor[1]); + + if (max_intel_level >= 0x00000001 && + max_intel_level <= 0x0000ffff) { + cpuid(0x1, &tfms, &ignored, &cpu.flags[4], + &cpu.flags[0]); + cpu.level = (tfms >> 8) & 15; + cpu.family = cpu.level; + cpu.model = (tfms >> 4) & 15; + if (cpu.level >= 6) + cpu.model += ((tfms >> 16) & 0xf) << 4; + } + + if (max_intel_level >= 0x00000007) { + cpuid_count(0x00000007, 0, &ignored, &ignored, + &cpu.flags[16], &ignored); + } + + cpuid(0x80000000, &max_amd_level, &ignored, &ignored, + &ignored); + + if (max_amd_level >= 0x80000001 && + max_amd_level <= 0x8000ffff) { + cpuid(0x80000001, &ignored, &ignored, &cpu.flags[6], + &cpu.flags[1]); + } + } +} diff --git a/arch/x86/boot/cpuflags.h b/arch/x86/boot/cpuflags.h new file mode 100644 index 000000000..2e20814d3 --- /dev/null +++ b/arch/x86/boot/cpuflags.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef BOOT_CPUFLAGS_H +#define BOOT_CPUFLAGS_H + +#include <asm/cpufeatures.h> +#include <asm/processor-flags.h> + +struct cpu_features { + int level; /* Family, or 64 for x86-64 */ + int family; /* Family, always */ + int model; + u32 flags[NCAPINTS]; +}; + +extern struct cpu_features cpu; +extern u32 cpu_vendor[3]; + +int has_eflag(unsigned long mask); +void get_cpuflags(void); + +#endif diff --git a/arch/x86/boot/ctype.h b/arch/x86/boot/ctype.h new file mode 100644 index 000000000..8f5ef2994 --- /dev/null +++ b/arch/x86/boot/ctype.h @@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef BOOT_CTYPE_H +#define BOOT_CTYPE_H + +static inline int isdigit(int ch) +{ + return (ch >= '0') && (ch <= '9'); +} + +static inline int isxdigit(int ch) +{ + if (isdigit(ch)) + return true; + + if ((ch >= 'a') && (ch <= 'f')) + return true; + + return (ch >= 'A') && (ch <= 'F'); +} + +#endif diff --git a/arch/x86/boot/early_serial_console.c b/arch/x86/boot/early_serial_console.c new file mode 100644 index 000000000..023bf1c3d --- /dev/null +++ b/arch/x86/boot/early_serial_console.c @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Serial port routines for use during early boot reporting. This code is + * included from both the compressed kernel and the regular kernel. + */ +#include "boot.h" + +#define DEFAULT_SERIAL_PORT 0x3f8 /* ttyS0 */ + +#define DLAB 0x80 + +#define TXR 0 /* Transmit register (WRITE) */ +#define RXR 0 /* Receive register (READ) */ +#define IER 1 /* Interrupt Enable */ +#define IIR 2 /* Interrupt ID */ +#define FCR 2 /* FIFO control */ +#define LCR 3 /* Line control */ +#define MCR 4 /* Modem control */ +#define LSR 5 /* Line Status */ +#define MSR 6 /* Modem Status */ +#define DLL 0 /* Divisor Latch Low */ +#define DLH 1 /* Divisor latch High */ + +#define DEFAULT_BAUD 9600 + +static void early_serial_init(int port, int baud) +{ + unsigned char c; + unsigned divisor; + + outb(0x3, port + LCR); /* 8n1 */ + outb(0, port + IER); /* no interrupt */ + outb(0, port + FCR); /* no fifo */ + outb(0x3, port + MCR); /* DTR + RTS */ + + divisor = 115200 / baud; + c = inb(port + LCR); + outb(c | DLAB, port + LCR); + outb(divisor & 0xff, port + DLL); + outb((divisor >> 8) & 0xff, port + DLH); + outb(c & ~DLAB, port + LCR); + + early_serial_base = port; +} + +static void parse_earlyprintk(void) +{ + int baud = DEFAULT_BAUD; + char arg[32]; + int pos = 0; + int port = 0; + + if (cmdline_find_option("earlyprintk", arg, sizeof(arg)) > 0) { + char *e; + + if (!strncmp(arg, "serial", 6)) { + port = DEFAULT_SERIAL_PORT; + pos += 6; + } + + if (arg[pos] == ',') + pos++; + + /* + * make sure we have + * "serial,0x3f8,115200" + * "serial,ttyS0,115200" + * "ttyS0,115200" + */ + if (pos == 7 && !strncmp(arg + pos, "0x", 2)) { + port = simple_strtoull(arg + pos, &e, 16); + if (port == 0 || arg + pos == e) + port = DEFAULT_SERIAL_PORT; + else + pos = e - arg; + } else if (!strncmp(arg + pos, "ttyS", 4)) { + static const int bases[] = { 0x3f8, 0x2f8 }; + int idx = 0; + + /* += strlen("ttyS"); */ + pos += 4; + + if (arg[pos++] == '1') + idx = 1; + + port = bases[idx]; + } + + if (arg[pos] == ',') + pos++; + + baud = simple_strtoull(arg + pos, &e, 0); + if (baud == 0 || arg + pos == e) + baud = DEFAULT_BAUD; + } + + if (port) + early_serial_init(port, baud); +} + +#define BASE_BAUD (1843200/16) +static unsigned int probe_baud(int port) +{ + unsigned char lcr, dll, dlh; + unsigned int quot; + + lcr = inb(port + LCR); + outb(lcr | DLAB, port + LCR); + dll = inb(port + DLL); + dlh = inb(port + DLH); + outb(lcr, port + LCR); + quot = (dlh << 8) | dll; + + return BASE_BAUD / quot; +} + +static void parse_console_uart8250(void) +{ + char optstr[64], *options; + int baud = DEFAULT_BAUD; + int port = 0; + + /* + * console=uart8250,io,0x3f8,115200n8 + * need to make sure it is last one console ! + */ + if (cmdline_find_option("console", optstr, sizeof(optstr)) <= 0) + return; + + options = optstr; + + if (!strncmp(options, "uart8250,io,", 12)) + port = simple_strtoull(options + 12, &options, 0); + else if (!strncmp(options, "uart,io,", 8)) + port = simple_strtoull(options + 8, &options, 0); + else + return; + + if (options && (options[0] == ',')) + baud = simple_strtoull(options + 1, &options, 0); + else + baud = probe_baud(port); + + if (port) + early_serial_init(port, baud); +} + +void console_init(void) +{ + parse_earlyprintk(); + + if (!early_serial_base) + parse_console_uart8250(); +} diff --git a/arch/x86/boot/edd.c b/arch/x86/boot/edd.c new file mode 100644 index 000000000..1fb4bc70c --- /dev/null +++ b/arch/x86/boot/edd.c @@ -0,0 +1,180 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * Copyright 2009 Intel Corporation; author H. Peter Anvin + * + * ----------------------------------------------------------------------- */ + +/* + * Get EDD BIOS disk information + */ + +#include "boot.h" +#include <linux/edd.h> +#include "string.h" + +#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE) + +/* + * Read the MBR (first sector) from a specific device. + */ +static int read_mbr(u8 devno, void *buf) +{ + struct biosregs ireg, oreg; + + initregs(&ireg); + ireg.ax = 0x0201; /* Legacy Read, one sector */ + ireg.cx = 0x0001; /* Sector 0-0-1 */ + ireg.dl = devno; + ireg.bx = (size_t)buf; + + intcall(0x13, &ireg, &oreg); + + return -(oreg.eflags & X86_EFLAGS_CF); /* 0 or -1 */ +} + +static u32 read_mbr_sig(u8 devno, struct edd_info *ei, u32 *mbrsig) +{ + int sector_size; + char *mbrbuf_ptr, *mbrbuf_end; + u32 buf_base, mbr_base; + extern char _end[]; + u16 mbr_magic; + + sector_size = ei->params.bytes_per_sector; + if (!sector_size) + sector_size = 512; /* Best available guess */ + + /* Produce a naturally aligned buffer on the heap */ + buf_base = (ds() << 4) + (u32)&_end; + mbr_base = (buf_base+sector_size-1) & ~(sector_size-1); + mbrbuf_ptr = _end + (mbr_base-buf_base); + mbrbuf_end = mbrbuf_ptr + sector_size; + + /* Make sure we actually have space on the heap... */ + if (!(boot_params.hdr.loadflags & CAN_USE_HEAP)) + return -1; + if (mbrbuf_end > (char *)(size_t)boot_params.hdr.heap_end_ptr) + return -1; + + memset(mbrbuf_ptr, 0, sector_size); + if (read_mbr(devno, mbrbuf_ptr)) + return -1; + + *mbrsig = *(u32 *)&mbrbuf_ptr[EDD_MBR_SIG_OFFSET]; + mbr_magic = *(u16 *)&mbrbuf_ptr[510]; + + /* check for valid MBR magic */ + return mbr_magic == 0xAA55 ? 0 : -1; +} + +static int get_edd_info(u8 devno, struct edd_info *ei) +{ + struct biosregs ireg, oreg; + + memset(ei, 0, sizeof(*ei)); + + /* Check Extensions Present */ + + initregs(&ireg); + ireg.ah = 0x41; + ireg.bx = EDDMAGIC1; + ireg.dl = devno; + intcall(0x13, &ireg, &oreg); + + if (oreg.eflags & X86_EFLAGS_CF) + return -1; /* No extended information */ + + if (oreg.bx != EDDMAGIC2) + return -1; + + ei->device = devno; + ei->version = oreg.ah; /* EDD version number */ + ei->interface_support = oreg.cx; /* EDD functionality subsets */ + + /* Extended Get Device Parameters */ + + ei->params.length = sizeof(ei->params); + ireg.ah = 0x48; + ireg.si = (size_t)&ei->params; + intcall(0x13, &ireg, &oreg); + + /* Get legacy CHS parameters */ + + /* Ralf Brown recommends setting ES:DI to 0:0 */ + ireg.ah = 0x08; + ireg.es = 0; + intcall(0x13, &ireg, &oreg); + + if (!(oreg.eflags & X86_EFLAGS_CF)) { + ei->legacy_max_cylinder = oreg.ch + ((oreg.cl & 0xc0) << 2); + ei->legacy_max_head = oreg.dh; + ei->legacy_sectors_per_track = oreg.cl & 0x3f; + } + + return 0; +} + +void query_edd(void) +{ + char eddarg[8]; + int do_mbr = 1; +#ifdef CONFIG_EDD_OFF + int do_edd = 0; +#else + int do_edd = 1; +#endif + int be_quiet; + int devno; + struct edd_info ei, *edp; + u32 *mbrptr; + + if (cmdline_find_option("edd", eddarg, sizeof(eddarg)) > 0) { + if (!strcmp(eddarg, "skipmbr") || !strcmp(eddarg, "skip")) { + do_edd = 1; + do_mbr = 0; + } + else if (!strcmp(eddarg, "off")) + do_edd = 0; + else if (!strcmp(eddarg, "on")) + do_edd = 1; + } + + be_quiet = cmdline_find_option_bool("quiet"); + + edp = boot_params.eddbuf; + mbrptr = boot_params.edd_mbr_sig_buffer; + + if (!do_edd) + return; + + /* Bugs in OnBoard or AddOnCards Bios may hang the EDD probe, + * so give a hint if this happens. + */ + + if (!be_quiet) + printf("Probing EDD (edd=off to disable)... "); + + for (devno = 0x80; devno < 0x80+EDD_MBR_SIG_MAX; devno++) { + /* + * Scan the BIOS-supported hard disks and query EDD + * information... + */ + if (!get_edd_info(devno, &ei) + && boot_params.eddbuf_entries < EDDMAXNR) { + memcpy(edp, &ei, sizeof(ei)); + edp++; + boot_params.eddbuf_entries++; + } + + if (do_mbr && !read_mbr_sig(devno, &ei, mbrptr++)) + boot_params.edd_mbr_sig_buf_entries = devno-0x80+1; + } + + if (!be_quiet) + printf("ok\n"); +} + +#endif diff --git a/arch/x86/boot/genimage.sh b/arch/x86/boot/genimage.sh new file mode 100644 index 000000000..6a10d52a4 --- /dev/null +++ b/arch/x86/boot/genimage.sh @@ -0,0 +1,130 @@ +#!/bin/sh +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 2017 by Changbin Du <changbin.du@intel.com> +# +# Adapted from code in arch/x86/boot/Makefile by H. Peter Anvin and others +# +# "make fdimage/fdimage144/fdimage288/isoimage" script for x86 architecture +# +# Arguments: +# $1 - fdimage format +# $2 - target image file +# $3 - kernel bzImage file +# $4 - mtool configuration file +# $5 - kernel cmdline +# $6 - inird image file +# + +# Use "make V=1" to debug this script +case "${KBUILD_VERBOSE}" in +*1*) + set -x + ;; +esac + +verify () { + if [ ! -f "$1" ]; then + echo "" 1>&2 + echo " *** Missing file: $1" 1>&2 + echo "" 1>&2 + exit 1 + fi +} + + +export MTOOLSRC=$4 +FIMAGE=$2 +FBZIMAGE=$3 +KCMDLINE=$5 +FDINITRD=$6 + +# Make sure the files actually exist +verify "$FBZIMAGE" + +genbzdisk() { + verify "$MTOOLSRC" + mformat a: + syslinux $FIMAGE + echo "$KCMDLINE" | mcopy - a:syslinux.cfg + if [ -f "$FDINITRD" ] ; then + mcopy "$FDINITRD" a:initrd.img + fi + mcopy $FBZIMAGE a:linux +} + +genfdimage144() { + verify "$MTOOLSRC" + dd if=/dev/zero of=$FIMAGE bs=1024 count=1440 2> /dev/null + mformat v: + syslinux $FIMAGE + echo "$KCMDLINE" | mcopy - v:syslinux.cfg + if [ -f "$FDINITRD" ] ; then + mcopy "$FDINITRD" v:initrd.img + fi + mcopy $FBZIMAGE v:linux +} + +genfdimage288() { + verify "$MTOOLSRC" + dd if=/dev/zero of=$FIMAGE bs=1024 count=2880 2> /dev/null + mformat w: + syslinux $FIMAGE + echo "$KCMDLINE" | mcopy - W:syslinux.cfg + if [ -f "$FDINITRD" ] ; then + mcopy "$FDINITRD" w:initrd.img + fi + mcopy $FBZIMAGE w:linux +} + +geniso() { + tmp_dir=`dirname $FIMAGE`/isoimage + rm -rf $tmp_dir + mkdir $tmp_dir + for i in lib lib64 share ; do + for j in syslinux ISOLINUX ; do + if [ -f /usr/$i/$j/isolinux.bin ] ; then + isolinux=/usr/$i/$j/isolinux.bin + fi + done + for j in syslinux syslinux/modules/bios ; do + if [ -f /usr/$i/$j/ldlinux.c32 ]; then + ldlinux=/usr/$i/$j/ldlinux.c32 + fi + done + if [ -n "$isolinux" -a -n "$ldlinux" ] ; then + break + fi + done + if [ -z "$isolinux" ] ; then + echo 'Need an isolinux.bin file, please install syslinux/isolinux.' + exit 1 + fi + if [ -z "$ldlinux" ] ; then + echo 'Need an ldlinux.c32 file, please install syslinux/isolinux.' + exit 1 + fi + cp $isolinux $tmp_dir + cp $ldlinux $tmp_dir + cp $FBZIMAGE $tmp_dir/linux + echo "$KCMDLINE" > $tmp_dir/isolinux.cfg + if [ -f "$FDINITRD" ] ; then + cp "$FDINITRD" $tmp_dir/initrd.img + fi + genisoimage -J -r -input-charset=utf-8 -quiet -o $FIMAGE \ + -b isolinux.bin -c boot.cat -no-emul-boot -boot-load-size 4 \ + -boot-info-table $tmp_dir + isohybrid $FIMAGE 2>/dev/null || true + rm -rf $tmp_dir +} + +case $1 in + bzdisk) genbzdisk;; + fdimage144) genfdimage144;; + fdimage288) genfdimage288;; + isoimage) geniso;; + *) echo 'Unknown image format'; exit 1; +esac diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S new file mode 100644 index 000000000..6dbd7e9f7 --- /dev/null +++ b/arch/x86/boot/header.S @@ -0,0 +1,656 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * header.S + * + * Copyright (C) 1991, 1992 Linus Torvalds + * + * Based on bootsect.S and setup.S + * modified by more people than can be counted + * + * Rewritten as a common file by H. Peter Anvin (Apr 2007) + * + * BIG FAT NOTE: We're in real mode using 64k segments. Therefore segment + * addresses must be multiplied by 16 to obtain their respective linear + * addresses. To avoid confusion, linear addresses are written using leading + * hex while segment addresses are written as segment:offset. + * + */ +#include <linux/pe.h> +#include <asm/segment.h> +#include <asm/boot.h> +#include <asm/page_types.h> +#include <asm/setup.h> +#include <asm/bootparam.h> +#include "boot.h" +#include "voffset.h" +#include "zoffset.h" + +BOOTSEG = 0x07C0 /* original address of boot-sector */ +SYSSEG = 0x1000 /* historical load address >> 4 */ + +#ifndef SVGA_MODE +#define SVGA_MODE ASK_VGA +#endif + +#ifndef ROOT_RDONLY +#define ROOT_RDONLY 1 +#endif + + .code16 + .section ".bstext", "ax" + + .global bootsect_start +bootsect_start: +#ifdef CONFIG_EFI_STUB + # "MZ", MS-DOS header + .word MZ_MAGIC +#endif + + # Normalize the start address + ljmp $BOOTSEG, $start2 + +start2: + movw %cs, %ax + movw %ax, %ds + movw %ax, %es + movw %ax, %ss + xorw %sp, %sp + sti + cld + + movw $bugger_off_msg, %si + +msg_loop: + lodsb + andb %al, %al + jz bs_die + movb $0xe, %ah + movw $7, %bx + int $0x10 + jmp msg_loop + +bs_die: + # Allow the user to press a key, then reboot + xorw %ax, %ax + int $0x16 + int $0x19 + + # int 0x19 should never return. In case it does anyway, + # invoke the BIOS reset code... + ljmp $0xf000,$0xfff0 + +#ifdef CONFIG_EFI_STUB + .org 0x3c + # + # Offset to the PE header. + # + .long pe_header +#endif /* CONFIG_EFI_STUB */ + + .section ".bsdata", "a" +bugger_off_msg: + .ascii "Use a boot loader.\r\n" + .ascii "\n" + .ascii "Remove disk and press any key to reboot...\r\n" + .byte 0 + +#ifdef CONFIG_EFI_STUB +pe_header: + .long PE_MAGIC + +coff_header: +#ifdef CONFIG_X86_32 + .set image_file_add_flags, IMAGE_FILE_32BIT_MACHINE + .set pe_opt_magic, PE_OPT_MAGIC_PE32 + .word IMAGE_FILE_MACHINE_I386 +#else + .set image_file_add_flags, 0 + .set pe_opt_magic, PE_OPT_MAGIC_PE32PLUS + .word IMAGE_FILE_MACHINE_AMD64 +#endif + .word section_count # nr_sections + .long 0 # TimeDateStamp + .long 0 # PointerToSymbolTable + .long 1 # NumberOfSymbols + .word section_table - optional_header # SizeOfOptionalHeader + .word IMAGE_FILE_EXECUTABLE_IMAGE | \ + image_file_add_flags | \ + IMAGE_FILE_DEBUG_STRIPPED | \ + IMAGE_FILE_LINE_NUMS_STRIPPED # Characteristics + +optional_header: + .word pe_opt_magic + .byte 0x02 # MajorLinkerVersion + .byte 0x14 # MinorLinkerVersion + + # Filled in by build.c + .long 0 # SizeOfCode + + .long 0 # SizeOfInitializedData + .long 0 # SizeOfUninitializedData + + # Filled in by build.c + .long 0x0000 # AddressOfEntryPoint + + .long 0x0200 # BaseOfCode +#ifdef CONFIG_X86_32 + .long 0 # data +#endif + +extra_header_fields: + # PE specification requires ImageBase to be 64k aligned + .set image_base, (LOAD_PHYSICAL_ADDR + 0xffff) & ~0xffff +#ifdef CONFIG_X86_32 + .long image_base # ImageBase +#else + .quad image_base # ImageBase +#endif + .long 0x20 # SectionAlignment + .long 0x20 # FileAlignment + .word 0 # MajorOperatingSystemVersion + .word 0 # MinorOperatingSystemVersion + .word LINUX_EFISTUB_MAJOR_VERSION # MajorImageVersion + .word LINUX_EFISTUB_MINOR_VERSION # MinorImageVersion + .word 0 # MajorSubsystemVersion + .word 0 # MinorSubsystemVersion + .long 0 # Win32VersionValue + + # + # The size of the bzImage is written in tools/build.c + # + .long 0 # SizeOfImage + + .long 0x200 # SizeOfHeaders + .long 0 # CheckSum + .word IMAGE_SUBSYSTEM_EFI_APPLICATION # Subsystem (EFI application) + .word 0 # DllCharacteristics +#ifdef CONFIG_X86_32 + .long 0 # SizeOfStackReserve + .long 0 # SizeOfStackCommit + .long 0 # SizeOfHeapReserve + .long 0 # SizeOfHeapCommit +#else + .quad 0 # SizeOfStackReserve + .quad 0 # SizeOfStackCommit + .quad 0 # SizeOfHeapReserve + .quad 0 # SizeOfHeapCommit +#endif + .long 0 # LoaderFlags + .long (section_table - .) / 8 # NumberOfRvaAndSizes + + .quad 0 # ExportTable + .quad 0 # ImportTable + .quad 0 # ResourceTable + .quad 0 # ExceptionTable + .quad 0 # CertificationTable + .quad 0 # BaseRelocationTable + + # Section table +section_table: + # + # The offset & size fields are filled in by build.c. + # + .ascii ".setup" + .byte 0 + .byte 0 + .long 0 + .long 0x0 # startup_{32,64} + .long 0 # Size of initialized data + # on disk + .long 0x0 # startup_{32,64} + .long 0 # PointerToRelocations + .long 0 # PointerToLineNumbers + .word 0 # NumberOfRelocations + .word 0 # NumberOfLineNumbers + .long IMAGE_SCN_CNT_CODE | \ + IMAGE_SCN_MEM_READ | \ + IMAGE_SCN_MEM_EXECUTE | \ + IMAGE_SCN_ALIGN_16BYTES # Characteristics + + # + # The EFI application loader requires a relocation section + # because EFI applications must be relocatable. The .reloc + # offset & size fields are filled in by build.c. + # + .ascii ".reloc" + .byte 0 + .byte 0 + .long 0 + .long 0 + .long 0 # SizeOfRawData + .long 0 # PointerToRawData + .long 0 # PointerToRelocations + .long 0 # PointerToLineNumbers + .word 0 # NumberOfRelocations + .word 0 # NumberOfLineNumbers + .long IMAGE_SCN_CNT_INITIALIZED_DATA | \ + IMAGE_SCN_MEM_READ | \ + IMAGE_SCN_MEM_DISCARDABLE | \ + IMAGE_SCN_ALIGN_1BYTES # Characteristics + +#ifdef CONFIG_EFI_MIXED + # + # The offset & size fields are filled in by build.c. + # + .asciz ".compat" + .long 0 + .long 0x0 + .long 0 # Size of initialized data + # on disk + .long 0x0 + .long 0 # PointerToRelocations + .long 0 # PointerToLineNumbers + .word 0 # NumberOfRelocations + .word 0 # NumberOfLineNumbers + .long IMAGE_SCN_CNT_INITIALIZED_DATA | \ + IMAGE_SCN_MEM_READ | \ + IMAGE_SCN_MEM_DISCARDABLE | \ + IMAGE_SCN_ALIGN_1BYTES # Characteristics +#endif + + # + # The offset & size fields are filled in by build.c. + # + .ascii ".text" + .byte 0 + .byte 0 + .byte 0 + .long 0 + .long 0x0 # startup_{32,64} + .long 0 # Size of initialized data + # on disk + .long 0x0 # startup_{32,64} + .long 0 # PointerToRelocations + .long 0 # PointerToLineNumbers + .word 0 # NumberOfRelocations + .word 0 # NumberOfLineNumbers + .long IMAGE_SCN_CNT_CODE | \ + IMAGE_SCN_MEM_READ | \ + IMAGE_SCN_MEM_EXECUTE | \ + IMAGE_SCN_ALIGN_16BYTES # Characteristics + + .set section_count, (. - section_table) / 40 +#endif /* CONFIG_EFI_STUB */ + + # Kernel attributes; used by setup. This is part 1 of the + # header, from the old boot sector. + + .section ".header", "a" + .globl sentinel +sentinel: .byte 0xff, 0xff /* Used to detect broken loaders */ + + .globl hdr +hdr: +setup_sects: .byte 0 /* Filled in by build.c */ +root_flags: .word ROOT_RDONLY +syssize: .long 0 /* Filled in by build.c */ +ram_size: .word 0 /* Obsolete */ +vid_mode: .word SVGA_MODE +root_dev: .word 0 /* Filled in by build.c */ +boot_flag: .word 0xAA55 + + # offset 512, entry point + + .globl _start +_start: + # Explicitly enter this as bytes, or the assembler + # tries to generate a 3-byte jump here, which causes + # everything else to push off to the wrong offset. + .byte 0xeb # short (2-byte) jump + .byte start_of_setup-1f +1: + + # Part 2 of the header, from the old setup.S + + .ascii "HdrS" # header signature + .word 0x020f # header version number (>= 0x0105) + # or else old loadlin-1.5 will fail) + .globl realmode_swtch +realmode_swtch: .word 0, 0 # default_switch, SETUPSEG +start_sys_seg: .word SYSSEG # obsolete and meaningless, but just + # in case something decided to "use" it + .word kernel_version-512 # pointing to kernel version string + # above section of header is compatible + # with loadlin-1.5 (header v1.5). Don't + # change it. + +type_of_loader: .byte 0 # 0 means ancient bootloader, newer + # bootloaders know to change this. + # See Documentation/x86/boot.rst for + # assigned ids + +# flags, unused bits must be zero (RFU) bit within loadflags +loadflags: + .byte LOADED_HIGH # The kernel is to be loaded high + +setup_move_size: .word 0x8000 # size to move, when setup is not + # loaded at 0x90000. We will move setup + # to 0x90000 then just before jumping + # into the kernel. However, only the + # loader knows how much data behind + # us also needs to be loaded. + +code32_start: # here loaders can put a different + # start address for 32-bit code. + .long 0x100000 # 0x100000 = default for big kernel + +ramdisk_image: .long 0 # address of loaded ramdisk image + # Here the loader puts the 32-bit + # address where it loaded the image. + # This only will be read by the kernel. + +ramdisk_size: .long 0 # its size in bytes + +bootsect_kludge: + .long 0 # obsolete + +heap_end_ptr: .word _end+STACK_SIZE-512 + # (Header version 0x0201 or later) + # space from here (exclusive) down to + # end of setup code can be used by setup + # for local heap purposes. + +ext_loader_ver: + .byte 0 # Extended boot loader version +ext_loader_type: + .byte 0 # Extended boot loader type + +cmd_line_ptr: .long 0 # (Header version 0x0202 or later) + # If nonzero, a 32-bit pointer + # to the kernel command line. + # The command line should be + # located between the start of + # setup and the end of low + # memory (0xa0000), or it may + # get overwritten before it + # gets read. If this field is + # used, there is no longer + # anything magical about the + # 0x90000 segment; the setup + # can be located anywhere in + # low memory 0x10000 or higher. + +initrd_addr_max: .long 0x7fffffff + # (Header version 0x0203 or later) + # The highest safe address for + # the contents of an initrd + # The current kernel allows up to 4 GB, + # but leave it at 2 GB to avoid + # possible bootloader bugs. + +kernel_alignment: .long CONFIG_PHYSICAL_ALIGN #physical addr alignment + #required for protected mode + #kernel +#ifdef CONFIG_RELOCATABLE +relocatable_kernel: .byte 1 +#else +relocatable_kernel: .byte 0 +#endif +min_alignment: .byte MIN_KERNEL_ALIGN_LG2 # minimum alignment + +xloadflags: +#ifdef CONFIG_X86_64 +# define XLF0 XLF_KERNEL_64 /* 64-bit kernel */ +#else +# define XLF0 0 +#endif + +#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_X86_64) + /* kernel/boot_param/ramdisk could be loaded above 4g */ +# define XLF1 XLF_CAN_BE_LOADED_ABOVE_4G +#else +# define XLF1 0 +#endif + +#ifdef CONFIG_EFI_STUB +# ifdef CONFIG_EFI_MIXED +# define XLF23 (XLF_EFI_HANDOVER_32|XLF_EFI_HANDOVER_64) +# else +# ifdef CONFIG_X86_64 +# define XLF23 XLF_EFI_HANDOVER_64 /* 64-bit EFI handover ok */ +# else +# define XLF23 XLF_EFI_HANDOVER_32 /* 32-bit EFI handover ok */ +# endif +# endif +#else +# define XLF23 0 +#endif + +#if defined(CONFIG_X86_64) && defined(CONFIG_EFI) && defined(CONFIG_KEXEC_CORE) +# define XLF4 XLF_EFI_KEXEC +#else +# define XLF4 0 +#endif + +#ifdef CONFIG_X86_64 +#ifdef CONFIG_X86_5LEVEL +#define XLF56 (XLF_5LEVEL|XLF_5LEVEL_ENABLED) +#else +#define XLF56 XLF_5LEVEL +#endif +#else +#define XLF56 0 +#endif + + .word XLF0 | XLF1 | XLF23 | XLF4 | XLF56 + +cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line, + #added with boot protocol + #version 2.06 + +hardware_subarch: .long 0 # subarchitecture, added with 2.07 + # default to 0 for normal x86 PC + +hardware_subarch_data: .quad 0 + +payload_offset: .long ZO_input_data +payload_length: .long ZO_z_input_len + +setup_data: .quad 0 # 64-bit physical pointer to + # single linked list of + # struct setup_data + +pref_address: .quad LOAD_PHYSICAL_ADDR # preferred load addr + +# +# Getting to provably safe in-place decompression is hard. Worst case +# behaviours need to be analyzed. Here let's take the decompression of +# a gzip-compressed kernel as example, to illustrate it: +# +# The file layout of gzip compressed kernel is: +# +# magic[2] +# method[1] +# flags[1] +# timestamp[4] +# extraflags[1] +# os[1] +# compressed data blocks[N] +# crc[4] orig_len[4] +# +# ... resulting in +18 bytes overhead of uncompressed data. +# +# (For more information, please refer to RFC 1951 and RFC 1952.) +# +# Files divided into blocks +# 1 bit (last block flag) +# 2 bits (block type) +# +# 1 block occurs every 32K -1 bytes or when there 50% compression +# has been achieved. The smallest block type encoding is always used. +# +# stored: +# 32 bits length in bytes. +# +# fixed: +# magic fixed tree. +# symbols. +# +# dynamic: +# dynamic tree encoding. +# symbols. +# +# +# The buffer for decompression in place is the length of the uncompressed +# data, plus a small amount extra to keep the algorithm safe. The +# compressed data is placed at the end of the buffer. The output pointer +# is placed at the start of the buffer and the input pointer is placed +# where the compressed data starts. Problems will occur when the output +# pointer overruns the input pointer. +# +# The output pointer can only overrun the input pointer if the input +# pointer is moving faster than the output pointer. A condition only +# triggered by data whose compressed form is larger than the uncompressed +# form. +# +# The worst case at the block level is a growth of the compressed data +# of 5 bytes per 32767 bytes. +# +# The worst case internal to a compressed block is very hard to figure. +# The worst case can at least be bounded by having one bit that represents +# 32764 bytes and then all of the rest of the bytes representing the very +# very last byte. +# +# All of which is enough to compute an amount of extra data that is required +# to be safe. To avoid problems at the block level allocating 5 extra bytes +# per 32767 bytes of data is sufficient. To avoid problems internal to a +# block adding an extra 32767 bytes (the worst case uncompressed block size) +# is sufficient, to ensure that in the worst case the decompressed data for +# block will stop the byte before the compressed data for a block begins. +# To avoid problems with the compressed data's meta information an extra 18 +# bytes are needed. Leading to the formula: +# +# extra_bytes = (uncompressed_size >> 12) + 32768 + 18 +# +# Adding 8 bytes per 32K is a bit excessive but much easier to calculate. +# Adding 32768 instead of 32767 just makes for round numbers. +# +# Above analysis is for decompressing gzip compressed kernel only. Up to +# now 6 different decompressor are supported all together. And among them +# xz stores data in chunks and has maximum chunk of 64K. Hence safety +# margin should be updated to cover all decompressors so that we don't +# need to deal with each of them separately. Please check +# the description in lib/decompressor_xxx.c for specific information. +# +# extra_bytes = (uncompressed_size >> 12) + 65536 + 128 +# +# LZ4 is even worse: data that cannot be further compressed grows by 0.4%, +# or one byte per 256 bytes. OTOH, we can safely get rid of the +128 as +# the size-dependent part now grows so fast. +# +# extra_bytes = (uncompressed_size >> 8) + 65536 +# +# ZSTD compressed data grows by at most 3 bytes per 128K, and only has a 22 +# byte fixed overhead but has a maximum block size of 128K, so it needs a +# larger margin. +# +# extra_bytes = (uncompressed_size >> 8) + 131072 + +#define ZO_z_extra_bytes ((ZO_z_output_len >> 8) + 131072) +#if ZO_z_output_len > ZO_z_input_len +# define ZO_z_extract_offset (ZO_z_output_len + ZO_z_extra_bytes - \ + ZO_z_input_len) +#else +# define ZO_z_extract_offset ZO_z_extra_bytes +#endif + +/* + * The extract_offset has to be bigger than ZO head section. Otherwise when + * the head code is running to move ZO to the end of the buffer, it will + * overwrite the head code itself. + */ +#if (ZO__ehead - ZO_startup_32) > ZO_z_extract_offset +# define ZO_z_min_extract_offset ((ZO__ehead - ZO_startup_32 + 4095) & ~4095) +#else +# define ZO_z_min_extract_offset ((ZO_z_extract_offset + 4095) & ~4095) +#endif + +#define ZO_INIT_SIZE (ZO__end - ZO_startup_32 + ZO_z_min_extract_offset) + +#define VO_INIT_SIZE (VO__end - VO__text) +#if ZO_INIT_SIZE > VO_INIT_SIZE +# define INIT_SIZE ZO_INIT_SIZE +#else +# define INIT_SIZE VO_INIT_SIZE +#endif + +init_size: .long INIT_SIZE # kernel initialization size +handover_offset: .long 0 # Filled in by build.c +kernel_info_offset: .long 0 # Filled in by build.c + +# End of setup header ##################################################### + + .section ".entrytext", "ax" +start_of_setup: +# Force %es = %ds + movw %ds, %ax + movw %ax, %es + cld + +# Apparently some ancient versions of LILO invoked the kernel with %ss != %ds, +# which happened to work by accident for the old code. Recalculate the stack +# pointer if %ss is invalid. Otherwise leave it alone, LOADLIN sets up the +# stack behind its own code, so we can't blindly put it directly past the heap. + + movw %ss, %dx + cmpw %ax, %dx # %ds == %ss? + movw %sp, %dx + je 2f # -> assume %sp is reasonably set + + # Invalid %ss, make up a new stack + movw $_end, %dx + testb $CAN_USE_HEAP, loadflags + jz 1f + movw heap_end_ptr, %dx +1: addw $STACK_SIZE, %dx + jnc 2f + xorw %dx, %dx # Prevent wraparound + +2: # Now %dx should point to the end of our stack space + andw $~3, %dx # dword align (might as well...) + jnz 3f + movw $0xfffc, %dx # Make sure we're not zero +3: movw %ax, %ss + movzwl %dx, %esp # Clear upper half of %esp + sti # Now we should have a working stack + +# We will have entered with %cs = %ds+0x20, normalize %cs so +# it is on par with the other segments. + pushw %ds + pushw $6f + lretw +6: + +# Check signature at end of setup + cmpl $0x5a5aaa55, setup_sig + jne setup_bad + +# Zero the bss + movw $__bss_start, %di + movw $_end+3, %cx + xorl %eax, %eax + subw %di, %cx + shrw $2, %cx + rep; stosl + +# Jump to C code (should not return) + calll main + +# Setup corrupt somehow... +setup_bad: + movl $setup_corrupt, %eax + calll puts + # Fall through... + + .globl die + .type die, @function +die: + hlt + jmp die + + .size die, .-die + + .section ".initdata", "a" +setup_corrupt: + .byte 7 + .string "No setup signature found...\n" diff --git a/arch/x86/boot/install.sh b/arch/x86/boot/install.sh new file mode 100644 index 000000000..d13ec1c38 --- /dev/null +++ b/arch/x86/boot/install.sh @@ -0,0 +1,59 @@ +#!/bin/sh +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 1995 by Linus Torvalds +# +# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin +# +# "make install" script for i386 architecture +# +# Arguments: +# $1 - kernel version +# $2 - kernel image file +# $3 - kernel map file +# $4 - default install path (blank if root directory) +# + +verify () { + if [ ! -f "$1" ]; then + echo "" 1>&2 + echo " *** Missing file: $1" 1>&2 + echo ' *** You need to run "make" before "make install".' 1>&2 + echo "" 1>&2 + exit 1 + fi +} + +# Make sure the files actually exist +verify "$2" +verify "$3" + +# User may have a custom install script + +if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi +if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi + +# Default install - same as make zlilo + +if [ -f $4/vmlinuz ]; then + mv $4/vmlinuz $4/vmlinuz.old +fi + +if [ -f $4/System.map ]; then + mv $4/System.map $4/System.old +fi + +cat $2 > $4/vmlinuz +cp $3 $4/System.map + +if [ -x /sbin/lilo ]; then + /sbin/lilo +elif [ -x /etc/lilo/install ]; then + /etc/lilo/install +else + sync + echo "Cannot find LILO." +fi diff --git a/arch/x86/boot/main.c b/arch/x86/boot/main.c new file mode 100644 index 000000000..c421af5a3 --- /dev/null +++ b/arch/x86/boot/main.c @@ -0,0 +1,181 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * Copyright 2009 Intel Corporation; author H. Peter Anvin + * + * ----------------------------------------------------------------------- */ + +/* + * Main module for the real-mode kernel code + */ +#include <linux/build_bug.h> + +#include "boot.h" +#include "string.h" + +struct boot_params boot_params __attribute__((aligned(16))); + +char *HEAP = _end; +char *heap_end = _end; /* Default end of heap = no heap */ + +/* + * Copy the header into the boot parameter block. Since this + * screws up the old-style command line protocol, adjust by + * filling in the new-style command line pointer instead. + */ + +static void copy_boot_params(void) +{ + struct old_cmdline { + u16 cl_magic; + u16 cl_offset; + }; + const struct old_cmdline * const oldcmd = + absolute_pointer(OLD_CL_ADDRESS); + + BUILD_BUG_ON(sizeof(boot_params) != 4096); + memcpy(&boot_params.hdr, &hdr, sizeof(hdr)); + + if (!boot_params.hdr.cmd_line_ptr && + oldcmd->cl_magic == OLD_CL_MAGIC) { + /* Old-style command line protocol. */ + u16 cmdline_seg; + + /* Figure out if the command line falls in the region + of memory that an old kernel would have copied up + to 0x90000... */ + if (oldcmd->cl_offset < boot_params.hdr.setup_move_size) + cmdline_seg = ds(); + else + cmdline_seg = 0x9000; + + boot_params.hdr.cmd_line_ptr = + (cmdline_seg << 4) + oldcmd->cl_offset; + } +} + +/* + * Query the keyboard lock status as given by the BIOS, and + * set the keyboard repeat rate to maximum. Unclear why the latter + * is done here; this might be possible to kill off as stale code. + */ +static void keyboard_init(void) +{ + struct biosregs ireg, oreg; + initregs(&ireg); + + ireg.ah = 0x02; /* Get keyboard status */ + intcall(0x16, &ireg, &oreg); + boot_params.kbd_status = oreg.al; + + ireg.ax = 0x0305; /* Set keyboard repeat rate */ + intcall(0x16, &ireg, NULL); +} + +/* + * Get Intel SpeedStep (IST) information. + */ +static void query_ist(void) +{ + struct biosregs ireg, oreg; + + /* Some older BIOSes apparently crash on this call, so filter + it from machines too old to have SpeedStep at all. */ + if (cpu.level < 6) + return; + + initregs(&ireg); + ireg.ax = 0xe980; /* IST Support */ + ireg.edx = 0x47534943; /* Request value */ + intcall(0x15, &ireg, &oreg); + + boot_params.ist_info.signature = oreg.eax; + boot_params.ist_info.command = oreg.ebx; + boot_params.ist_info.event = oreg.ecx; + boot_params.ist_info.perf_level = oreg.edx; +} + +/* + * Tell the BIOS what CPU mode we intend to run in. + */ +static void set_bios_mode(void) +{ +#ifdef CONFIG_X86_64 + struct biosregs ireg; + + initregs(&ireg); + ireg.ax = 0xec00; + ireg.bx = 2; + intcall(0x15, &ireg, NULL); +#endif +} + +static void init_heap(void) +{ + char *stack_end; + + if (boot_params.hdr.loadflags & CAN_USE_HEAP) { + asm("leal %P1(%%esp),%0" + : "=r" (stack_end) : "i" (-STACK_SIZE)); + + heap_end = (char *) + ((size_t)boot_params.hdr.heap_end_ptr + 0x200); + if (heap_end > stack_end) + heap_end = stack_end; + } else { + /* Boot protocol 2.00 only, no heap available */ + puts("WARNING: Ancient bootloader, some functionality " + "may be limited!\n"); + } +} + +void main(void) +{ + /* First, copy the boot header into the "zeropage" */ + copy_boot_params(); + + /* Initialize the early-boot console */ + console_init(); + if (cmdline_find_option_bool("debug")) + puts("early console in setup code\n"); + + /* End of heap check */ + init_heap(); + + /* Make sure we have all the proper CPU support */ + if (validate_cpu()) { + puts("Unable to boot - please use a kernel appropriate " + "for your CPU.\n"); + die(); + } + + /* Tell the BIOS what CPU mode we intend to run in. */ + set_bios_mode(); + + /* Detect memory layout */ + detect_memory(); + + /* Set keyboard repeat rate (why?) and query the lock flags */ + keyboard_init(); + + /* Query Intel SpeedStep (IST) information */ + query_ist(); + + /* Query APM information */ +#if defined(CONFIG_APM) || defined(CONFIG_APM_MODULE) + query_apm_bios(); +#endif + + /* Query EDD information */ +#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE) + query_edd(); +#endif + + /* Set the video mode */ + set_video(); + + /* Do the last things and invoke protected mode */ + go_to_protected_mode(); +} diff --git a/arch/x86/boot/memory.c b/arch/x86/boot/memory.c new file mode 100644 index 000000000..b0422b79d --- /dev/null +++ b/arch/x86/boot/memory.c @@ -0,0 +1,123 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * Copyright 2009 Intel Corporation; author H. Peter Anvin + * + * ----------------------------------------------------------------------- */ + +/* + * Memory detection code + */ + +#include "boot.h" + +#define SMAP 0x534d4150 /* ASCII "SMAP" */ + +static void detect_memory_e820(void) +{ + int count = 0; + struct biosregs ireg, oreg; + struct boot_e820_entry *desc = boot_params.e820_table; + static struct boot_e820_entry buf; /* static so it is zeroed */ + + initregs(&ireg); + ireg.ax = 0xe820; + ireg.cx = sizeof(buf); + ireg.edx = SMAP; + ireg.di = (size_t)&buf; + + /* + * Note: at least one BIOS is known which assumes that the + * buffer pointed to by one e820 call is the same one as + * the previous call, and only changes modified fields. Therefore, + * we use a temporary buffer and copy the results entry by entry. + * + * This routine deliberately does not try to account for + * ACPI 3+ extended attributes. This is because there are + * BIOSes in the field which report zero for the valid bit for + * all ranges, and we don't currently make any use of the + * other attribute bits. Revisit this if we see the extended + * attribute bits deployed in a meaningful way in the future. + */ + + do { + intcall(0x15, &ireg, &oreg); + ireg.ebx = oreg.ebx; /* for next iteration... */ + + /* BIOSes which terminate the chain with CF = 1 as opposed + to %ebx = 0 don't always report the SMAP signature on + the final, failing, probe. */ + if (oreg.eflags & X86_EFLAGS_CF) + break; + + /* Some BIOSes stop returning SMAP in the middle of + the search loop. We don't know exactly how the BIOS + screwed up the map at that point, we might have a + partial map, the full map, or complete garbage, so + just return failure. */ + if (oreg.eax != SMAP) { + count = 0; + break; + } + + *desc++ = buf; + count++; + } while (ireg.ebx && count < ARRAY_SIZE(boot_params.e820_table)); + + boot_params.e820_entries = count; +} + +static void detect_memory_e801(void) +{ + struct biosregs ireg, oreg; + + initregs(&ireg); + ireg.ax = 0xe801; + intcall(0x15, &ireg, &oreg); + + if (oreg.eflags & X86_EFLAGS_CF) + return; + + /* Do we really need to do this? */ + if (oreg.cx || oreg.dx) { + oreg.ax = oreg.cx; + oreg.bx = oreg.dx; + } + + if (oreg.ax > 15*1024) { + return; /* Bogus! */ + } else if (oreg.ax == 15*1024) { + boot_params.alt_mem_k = (oreg.bx << 6) + oreg.ax; + } else { + /* + * This ignores memory above 16MB if we have a memory + * hole there. If someone actually finds a machine + * with a memory hole at 16MB and no support for + * 0E820h they should probably generate a fake e820 + * map. + */ + boot_params.alt_mem_k = oreg.ax; + } +} + +static void detect_memory_88(void) +{ + struct biosregs ireg, oreg; + + initregs(&ireg); + ireg.ah = 0x88; + intcall(0x15, &ireg, &oreg); + + boot_params.screen_info.ext_mem_k = oreg.ax; +} + +void detect_memory(void) +{ + detect_memory_e820(); + + detect_memory_e801(); + + detect_memory_88(); +} diff --git a/arch/x86/boot/mkcpustr.c b/arch/x86/boot/mkcpustr.c new file mode 100644 index 000000000..da0ccc5de --- /dev/null +++ b/arch/x86/boot/mkcpustr.c @@ -0,0 +1,50 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* ----------------------------------------------------------------------- * + * + * Copyright 2008 rPath, Inc. - All Rights Reserved + * + * ----------------------------------------------------------------------- */ + +/* + * This is a host program to preprocess the CPU strings into a + * compact format suitable for the setup code. + */ + +#include <stdio.h> + +#include "../include/asm/required-features.h" +#include "../include/asm/disabled-features.h" +#include "../include/asm/cpufeatures.h" +#include "../include/asm/vmxfeatures.h" +#include "../kernel/cpu/capflags.c" + +int main(void) +{ + int i, j; + const char *str; + + printf("static const char x86_cap_strs[] =\n"); + + for (i = 0; i < NCAPINTS; i++) { + for (j = 0; j < 32; j++) { + str = x86_cap_flags[i*32+j]; + + if (i == NCAPINTS-1 && j == 31) { + /* The last entry must be unconditional; this + also consumes the compiler-added null + character */ + if (!str) + str = ""; + printf("\t\"\\x%02x\\x%02x\"\"%s\"\n", + i, j, str); + } else if (str) { + printf("#if REQUIRED_MASK%d & (1 << %d)\n" + "\t\"\\x%02x\\x%02x\"\"%s\\0\"\n" + "#endif\n", + i, j, i, j, str); + } + } + } + printf("\t;\n"); + return 0; +} diff --git a/arch/x86/boot/mtools.conf.in b/arch/x86/boot/mtools.conf.in new file mode 100644 index 000000000..efd6d2490 --- /dev/null +++ b/arch/x86/boot/mtools.conf.in @@ -0,0 +1,17 @@ +# +# mtools configuration file for "make (b)zdisk" +# + +# Actual floppy drive +drive a: + file="/dev/fd0" + +# 1.44 MB floppy disk image +drive v: + file="@OBJ@/fdimage" cylinders=80 heads=2 sectors=18 filter + +# 2.88 MB floppy disk image (mostly for virtual uses) +drive w: + file="@OBJ@/fdimage" cylinders=80 heads=2 sectors=36 filter + + diff --git a/arch/x86/boot/pm.c b/arch/x86/boot/pm.c new file mode 100644 index 000000000..40031a614 --- /dev/null +++ b/arch/x86/boot/pm.c @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * ----------------------------------------------------------------------- */ + +/* + * Prepare the machine for transition to protected mode. + */ + +#include "boot.h" +#include <asm/segment.h> + +/* + * Invoke the realmode switch hook if present; otherwise + * disable all interrupts. + */ +static void realmode_switch_hook(void) +{ + if (boot_params.hdr.realmode_swtch) { + asm volatile("lcallw *%0" + : : "m" (boot_params.hdr.realmode_swtch) + : "eax", "ebx", "ecx", "edx"); + } else { + asm volatile("cli"); + outb(0x80, 0x70); /* Disable NMI */ + io_delay(); + } +} + +/* + * Disable all interrupts at the legacy PIC. + */ +static void mask_all_interrupts(void) +{ + outb(0xff, 0xa1); /* Mask all interrupts on the secondary PIC */ + io_delay(); + outb(0xfb, 0x21); /* Mask all but cascade on the primary PIC */ + io_delay(); +} + +/* + * Reset IGNNE# if asserted in the FPU. + */ +static void reset_coprocessor(void) +{ + outb(0, 0xf0); + io_delay(); + outb(0, 0xf1); + io_delay(); +} + +/* + * Set up the GDT + */ + +struct gdt_ptr { + u16 len; + u32 ptr; +} __attribute__((packed)); + +static void setup_gdt(void) +{ + /* There are machines which are known to not boot with the GDT + being 8-byte unaligned. Intel recommends 16 byte alignment. */ + static const u64 boot_gdt[] __attribute__((aligned(16))) = { + /* CS: code, read/execute, 4 GB, base 0 */ + [GDT_ENTRY_BOOT_CS] = GDT_ENTRY(0xc09b, 0, 0xfffff), + /* DS: data, read/write, 4 GB, base 0 */ + [GDT_ENTRY_BOOT_DS] = GDT_ENTRY(0xc093, 0, 0xfffff), + /* TSS: 32-bit tss, 104 bytes, base 4096 */ + /* We only have a TSS here to keep Intel VT happy; + we don't actually use it for anything. */ + [GDT_ENTRY_BOOT_TSS] = GDT_ENTRY(0x0089, 4096, 103), + }; + /* Xen HVM incorrectly stores a pointer to the gdt_ptr, instead + of the gdt_ptr contents. Thus, make it static so it will + stay in memory, at least long enough that we switch to the + proper kernel GDT. */ + static struct gdt_ptr gdt; + + gdt.len = sizeof(boot_gdt)-1; + gdt.ptr = (u32)&boot_gdt + (ds() << 4); + + asm volatile("lgdtl %0" : : "m" (gdt)); +} + +/* + * Set up the IDT + */ +static void setup_idt(void) +{ + static const struct gdt_ptr null_idt = {0, 0}; + asm volatile("lidtl %0" : : "m" (null_idt)); +} + +/* + * Actual invocation sequence + */ +void go_to_protected_mode(void) +{ + /* Hook before leaving real mode, also disables interrupts */ + realmode_switch_hook(); + + /* Enable the A20 gate */ + if (enable_a20()) { + puts("A20 gate not responding, unable to boot...\n"); + die(); + } + + /* Reset coprocessor (IGNNE#) */ + reset_coprocessor(); + + /* Mask all interrupts in the PIC */ + mask_all_interrupts(); + + /* Actual transition to protected mode... */ + setup_idt(); + setup_gdt(); + protected_mode_jump(boot_params.hdr.code32_start, + (u32)&boot_params + (ds() << 4)); +} diff --git a/arch/x86/boot/pmjump.S b/arch/x86/boot/pmjump.S new file mode 100644 index 000000000..cbec8bd08 --- /dev/null +++ b/arch/x86/boot/pmjump.S @@ -0,0 +1,75 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* ----------------------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * ----------------------------------------------------------------------- */ + +/* + * The actual transition into protected mode + */ + +#include <asm/boot.h> +#include <asm/processor-flags.h> +#include <asm/segment.h> +#include <linux/linkage.h> + + .text + .code16 + +/* + * void protected_mode_jump(u32 entrypoint, u32 bootparams); + */ +SYM_FUNC_START_NOALIGN(protected_mode_jump) + movl %edx, %esi # Pointer to boot_params table + + xorl %ebx, %ebx + movw %cs, %bx + shll $4, %ebx + addl %ebx, 2f + jmp 1f # Short jump to serialize on 386/486 +1: + + movw $__BOOT_DS, %cx + movw $__BOOT_TSS, %di + + movl %cr0, %edx + orb $X86_CR0_PE, %dl # Protected mode + movl %edx, %cr0 + + # Transition to 32-bit mode + .byte 0x66, 0xea # ljmpl opcode +2: .long .Lin_pm32 # offset + .word __BOOT_CS # segment +SYM_FUNC_END(protected_mode_jump) + + .code32 + .section ".text32","ax" +SYM_FUNC_START_LOCAL_NOALIGN(.Lin_pm32) + # Set up data segments for flat 32-bit mode + movl %ecx, %ds + movl %ecx, %es + movl %ecx, %fs + movl %ecx, %gs + movl %ecx, %ss + # The 32-bit code sets up its own stack, but this way we do have + # a valid stack if some debugging hack wants to use it. + addl %ebx, %esp + + # Set up TR to make Intel VT happy + ltr %di + + # Clear registers to allow for future extensions to the + # 32-bit boot protocol + xorl %ecx, %ecx + xorl %edx, %edx + xorl %ebx, %ebx + xorl %ebp, %ebp + xorl %edi, %edi + + # Set up LDTR to make Intel VT happy + lldt %cx + + jmpl *%eax # Jump to the 32-bit entrypoint +SYM_FUNC_END(.Lin_pm32) diff --git a/arch/x86/boot/printf.c b/arch/x86/boot/printf.c new file mode 100644 index 000000000..1237beeb9 --- /dev/null +++ b/arch/x86/boot/printf.c @@ -0,0 +1,307 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * ----------------------------------------------------------------------- */ + +/* + * Oh, it's a waste of space, but oh-so-yummy for debugging. This + * version of printf() does not include 64-bit support. "Live with + * it." + * + */ + +#include "boot.h" + +static int skip_atoi(const char **s) +{ + int i = 0; + + while (isdigit(**s)) + i = i * 10 + *((*s)++) - '0'; + return i; +} + +#define ZEROPAD 1 /* pad with zero */ +#define SIGN 2 /* unsigned/signed long */ +#define PLUS 4 /* show plus */ +#define SPACE 8 /* space if plus */ +#define LEFT 16 /* left justified */ +#define SMALL 32 /* Must be 32 == 0x20 */ +#define SPECIAL 64 /* 0x */ + +#define __do_div(n, base) ({ \ +int __res; \ +__res = ((unsigned long) n) % (unsigned) base; \ +n = ((unsigned long) n) / (unsigned) base; \ +__res; }) + +static char *number(char *str, long num, int base, int size, int precision, + int type) +{ + /* we are called with base 8, 10 or 16, only, thus don't need "G..." */ + static const char digits[16] = "0123456789ABCDEF"; /* "GHIJKLMNOPQRSTUVWXYZ"; */ + + char tmp[66]; + char c, sign, locase; + int i; + + /* locase = 0 or 0x20. ORing digits or letters with 'locase' + * produces same digits or (maybe lowercased) letters */ + locase = (type & SMALL); + if (type & LEFT) + type &= ~ZEROPAD; + if (base < 2 || base > 16) + return NULL; + c = (type & ZEROPAD) ? '0' : ' '; + sign = 0; + if (type & SIGN) { + if (num < 0) { + sign = '-'; + num = -num; + size--; + } else if (type & PLUS) { + sign = '+'; + size--; + } else if (type & SPACE) { + sign = ' '; + size--; + } + } + if (type & SPECIAL) { + if (base == 16) + size -= 2; + else if (base == 8) + size--; + } + i = 0; + if (num == 0) + tmp[i++] = '0'; + else + while (num != 0) + tmp[i++] = (digits[__do_div(num, base)] | locase); + if (i > precision) + precision = i; + size -= precision; + if (!(type & (ZEROPAD + LEFT))) + while (size-- > 0) + *str++ = ' '; + if (sign) + *str++ = sign; + if (type & SPECIAL) { + if (base == 8) + *str++ = '0'; + else if (base == 16) { + *str++ = '0'; + *str++ = ('X' | locase); + } + } + if (!(type & LEFT)) + while (size-- > 0) + *str++ = c; + while (i < precision--) + *str++ = '0'; + while (i-- > 0) + *str++ = tmp[i]; + while (size-- > 0) + *str++ = ' '; + return str; +} + +int vsprintf(char *buf, const char *fmt, va_list args) +{ + int len; + unsigned long num; + int i, base; + char *str; + const char *s; + + int flags; /* flags to number() */ + + int field_width; /* width of output field */ + int precision; /* min. # of digits for integers; max + number of chars for from string */ + int qualifier; /* 'h', 'l', or 'L' for integer fields */ + + for (str = buf; *fmt; ++fmt) { + if (*fmt != '%') { + *str++ = *fmt; + continue; + } + + /* process flags */ + flags = 0; + repeat: + ++fmt; /* this also skips first '%' */ + switch (*fmt) { + case '-': + flags |= LEFT; + goto repeat; + case '+': + flags |= PLUS; + goto repeat; + case ' ': + flags |= SPACE; + goto repeat; + case '#': + flags |= SPECIAL; + goto repeat; + case '0': + flags |= ZEROPAD; + goto repeat; + } + + /* get field width */ + field_width = -1; + if (isdigit(*fmt)) + field_width = skip_atoi(&fmt); + else if (*fmt == '*') { + ++fmt; + /* it's the next argument */ + field_width = va_arg(args, int); + if (field_width < 0) { + field_width = -field_width; + flags |= LEFT; + } + } + + /* get the precision */ + precision = -1; + if (*fmt == '.') { + ++fmt; + if (isdigit(*fmt)) + precision = skip_atoi(&fmt); + else if (*fmt == '*') { + ++fmt; + /* it's the next argument */ + precision = va_arg(args, int); + } + if (precision < 0) + precision = 0; + } + + /* get the conversion qualifier */ + qualifier = -1; + if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L') { + qualifier = *fmt; + ++fmt; + } + + /* default base */ + base = 10; + + switch (*fmt) { + case 'c': + if (!(flags & LEFT)) + while (--field_width > 0) + *str++ = ' '; + *str++ = (unsigned char)va_arg(args, int); + while (--field_width > 0) + *str++ = ' '; + continue; + + case 's': + s = va_arg(args, char *); + len = strnlen(s, precision); + + if (!(flags & LEFT)) + while (len < field_width--) + *str++ = ' '; + for (i = 0; i < len; ++i) + *str++ = *s++; + while (len < field_width--) + *str++ = ' '; + continue; + + case 'p': + if (field_width == -1) { + field_width = 2 * sizeof(void *); + flags |= ZEROPAD; + } + str = number(str, + (unsigned long)va_arg(args, void *), 16, + field_width, precision, flags); + continue; + + case 'n': + if (qualifier == 'l') { + long *ip = va_arg(args, long *); + *ip = (str - buf); + } else { + int *ip = va_arg(args, int *); + *ip = (str - buf); + } + continue; + + case '%': + *str++ = '%'; + continue; + + /* integer number formats - set up the flags and "break" */ + case 'o': + base = 8; + break; + + case 'x': + flags |= SMALL; + case 'X': + base = 16; + break; + + case 'd': + case 'i': + flags |= SIGN; + case 'u': + break; + + default: + *str++ = '%'; + if (*fmt) + *str++ = *fmt; + else + --fmt; + continue; + } + if (qualifier == 'l') + num = va_arg(args, unsigned long); + else if (qualifier == 'h') { + num = (unsigned short)va_arg(args, int); + if (flags & SIGN) + num = (short)num; + } else if (flags & SIGN) + num = va_arg(args, int); + else + num = va_arg(args, unsigned int); + str = number(str, num, base, field_width, precision, flags); + } + *str = '\0'; + return str - buf; +} + +int sprintf(char *buf, const char *fmt, ...) +{ + va_list args; + int i; + + va_start(args, fmt); + i = vsprintf(buf, fmt, args); + va_end(args); + return i; +} + +int printf(const char *fmt, ...) +{ + char printf_buf[1024]; + va_list args; + int printed; + + va_start(args, fmt); + printed = vsprintf(printf_buf, fmt, args); + va_end(args); + + puts(printf_buf); + + return printed; +} diff --git a/arch/x86/boot/regs.c b/arch/x86/boot/regs.c new file mode 100644 index 000000000..55de6b309 --- /dev/null +++ b/arch/x86/boot/regs.c @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* ----------------------------------------------------------------------- + * + * Copyright 2009 Intel Corporation; author H. Peter Anvin + * + * ----------------------------------------------------------------------- */ + +/* + * Simple helper function for initializing a register set. + * + * Note that this sets EFLAGS_CF in the input register set; this + * makes it easier to catch functions which do nothing but don't + * explicitly set CF. + */ + +#include "boot.h" +#include "string.h" + +void initregs(struct biosregs *reg) +{ + memset(reg, 0, sizeof(*reg)); + reg->eflags |= X86_EFLAGS_CF; + reg->ds = ds(); + reg->es = ds(); + reg->fs = fs(); + reg->gs = gs(); +} diff --git a/arch/x86/boot/setup.ld b/arch/x86/boot/setup.ld new file mode 100644 index 000000000..49546c247 --- /dev/null +++ b/arch/x86/boot/setup.ld @@ -0,0 +1,66 @@ +/* + * setup.ld + * + * Linker script for the i386 setup code + */ +OUTPUT_FORMAT("elf32-i386") +OUTPUT_ARCH(i386) +ENTRY(_start) + +SECTIONS +{ + . = 0; + .bstext : { *(.bstext) } + .bsdata : { *(.bsdata) } + + . = 495; + .header : { *(.header) } + .entrytext : { *(.entrytext) } + .inittext : { *(.inittext) } + .initdata : { *(.initdata) } + __end_init = .; + + .text : { *(.text .text.*) } + .text32 : { *(.text32) } + + . = ALIGN(16); + .rodata : { *(.rodata*) } + + .videocards : { + video_cards = .; + *(.videocards) + video_cards_end = .; + } + + . = ALIGN(16); + .data : { *(.data*) } + + .signature : { + setup_sig = .; + LONG(0x5a5aaa55) + } + + + . = ALIGN(16); + .bss : + { + __bss_start = .; + *(.bss) + __bss_end = .; + } + . = ALIGN(16); + _end = .; + + /DISCARD/ : { + *(.note*) + } + + /* + * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility: + */ + . = ASSERT(_end <= 0x8000, "Setup too big!"); + . = ASSERT(hdr == 0x1f1, "The setup header has the wrong offset!"); + /* Necessary for the very-old-loader check to work... */ + . = ASSERT(__end_init <= 5*512, "init sections too big!"); + +} diff --git a/arch/x86/boot/string.c b/arch/x86/boot/string.c new file mode 100644 index 000000000..8a3fff912 --- /dev/null +++ b/arch/x86/boot/string.c @@ -0,0 +1,378 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * ----------------------------------------------------------------------- */ + +/* + * Very basic string functions + */ + +#include <linux/types.h> +#include <linux/compiler.h> +#include <linux/errno.h> +#include <linux/limits.h> +#include <asm/asm.h> +#include "ctype.h" +#include "string.h" + +#define KSTRTOX_OVERFLOW (1U << 31) + +/* + * Undef these macros so that the functions that we provide + * here will have the correct names regardless of how string.h + * may have chosen to #define them. + */ +#undef memcpy +#undef memset +#undef memcmp + +int memcmp(const void *s1, const void *s2, size_t len) +{ + bool diff; + asm("repe; cmpsb" CC_SET(nz) + : CC_OUT(nz) (diff), "+D" (s1), "+S" (s2), "+c" (len)); + return diff; +} + +/* + * Clang may lower `memcmp == 0` to `bcmp == 0`. + */ +int bcmp(const void *s1, const void *s2, size_t len) +{ + return memcmp(s1, s2, len); +} + +int strcmp(const char *str1, const char *str2) +{ + const unsigned char *s1 = (const unsigned char *)str1; + const unsigned char *s2 = (const unsigned char *)str2; + int delta = 0; + + while (*s1 || *s2) { + delta = *s1 - *s2; + if (delta) + return delta; + s1++; + s2++; + } + return 0; +} + +int strncmp(const char *cs, const char *ct, size_t count) +{ + unsigned char c1, c2; + + while (count) { + c1 = *cs++; + c2 = *ct++; + if (c1 != c2) + return c1 < c2 ? -1 : 1; + if (!c1) + break; + count--; + } + return 0; +} + +size_t strnlen(const char *s, size_t maxlen) +{ + const char *es = s; + while (*es && maxlen) { + es++; + maxlen--; + } + + return (es - s); +} + +unsigned int atou(const char *s) +{ + unsigned int i = 0; + while (isdigit(*s)) + i = i * 10 + (*s++ - '0'); + return i; +} + +/* Works only for digits and letters, but small and fast */ +#define TOLOWER(x) ((x) | 0x20) + +static unsigned int simple_guess_base(const char *cp) +{ + if (cp[0] == '0') { + if (TOLOWER(cp[1]) == 'x' && isxdigit(cp[2])) + return 16; + else + return 8; + } else { + return 10; + } +} + +/** + * simple_strtoull - convert a string to an unsigned long long + * @cp: The start of the string + * @endp: A pointer to the end of the parsed string will be placed here + * @base: The number base to use + */ +unsigned long long simple_strtoull(const char *cp, char **endp, unsigned int base) +{ + unsigned long long result = 0; + + if (!base) + base = simple_guess_base(cp); + + if (base == 16 && cp[0] == '0' && TOLOWER(cp[1]) == 'x') + cp += 2; + + while (isxdigit(*cp)) { + unsigned int value; + + value = isdigit(*cp) ? *cp - '0' : TOLOWER(*cp) - 'a' + 10; + if (value >= base) + break; + result = result * base + value; + cp++; + } + if (endp) + *endp = (char *)cp; + + return result; +} + +long simple_strtol(const char *cp, char **endp, unsigned int base) +{ + if (*cp == '-') + return -simple_strtoull(cp + 1, endp, base); + + return simple_strtoull(cp, endp, base); +} + +/** + * strlen - Find the length of a string + * @s: The string to be sized + */ +size_t strlen(const char *s) +{ + const char *sc; + + for (sc = s; *sc != '\0'; ++sc) + /* nothing */; + return sc - s; +} + +/** + * strstr - Find the first substring in a %NUL terminated string + * @s1: The string to be searched + * @s2: The string to search for + */ +char *strstr(const char *s1, const char *s2) +{ + size_t l1, l2; + + l2 = strlen(s2); + if (!l2) + return (char *)s1; + l1 = strlen(s1); + while (l1 >= l2) { + l1--; + if (!memcmp(s1, s2, l2)) + return (char *)s1; + s1++; + } + return NULL; +} + +/** + * strchr - Find the first occurrence of the character c in the string s. + * @s: the string to be searched + * @c: the character to search for + */ +char *strchr(const char *s, int c) +{ + while (*s != (char)c) + if (*s++ == '\0') + return NULL; + return (char *)s; +} + +static inline u64 __div_u64_rem(u64 dividend, u32 divisor, u32 *remainder) +{ + union { + u64 v64; + u32 v32[2]; + } d = { dividend }; + u32 upper; + + upper = d.v32[1]; + d.v32[1] = 0; + if (upper >= divisor) { + d.v32[1] = upper / divisor; + upper %= divisor; + } + asm ("divl %2" : "=a" (d.v32[0]), "=d" (*remainder) : + "rm" (divisor), "0" (d.v32[0]), "1" (upper)); + return d.v64; +} + +static inline u64 __div_u64(u64 dividend, u32 divisor) +{ + u32 remainder; + + return __div_u64_rem(dividend, divisor, &remainder); +} + +static inline char _tolower(const char c) +{ + return c | 0x20; +} + +static const char *_parse_integer_fixup_radix(const char *s, unsigned int *base) +{ + if (*base == 0) { + if (s[0] == '0') { + if (_tolower(s[1]) == 'x' && isxdigit(s[2])) + *base = 16; + else + *base = 8; + } else + *base = 10; + } + if (*base == 16 && s[0] == '0' && _tolower(s[1]) == 'x') + s += 2; + return s; +} + +/* + * Convert non-negative integer string representation in explicitly given radix + * to an integer. + * Return number of characters consumed maybe or-ed with overflow bit. + * If overflow occurs, result integer (incorrect) is still returned. + * + * Don't you dare use this function. + */ +static unsigned int _parse_integer(const char *s, + unsigned int base, + unsigned long long *p) +{ + unsigned long long res; + unsigned int rv; + + res = 0; + rv = 0; + while (1) { + unsigned int c = *s; + unsigned int lc = c | 0x20; /* don't tolower() this line */ + unsigned int val; + + if ('0' <= c && c <= '9') + val = c - '0'; + else if ('a' <= lc && lc <= 'f') + val = lc - 'a' + 10; + else + break; + + if (val >= base) + break; + /* + * Check for overflow only if we are within range of + * it in the max base we support (16) + */ + if (unlikely(res & (~0ull << 60))) { + if (res > __div_u64(ULLONG_MAX - val, base)) + rv |= KSTRTOX_OVERFLOW; + } + res = res * base + val; + rv++; + s++; + } + *p = res; + return rv; +} + +static int _kstrtoull(const char *s, unsigned int base, unsigned long long *res) +{ + unsigned long long _res; + unsigned int rv; + + s = _parse_integer_fixup_radix(s, &base); + rv = _parse_integer(s, base, &_res); + if (rv & KSTRTOX_OVERFLOW) + return -ERANGE; + if (rv == 0) + return -EINVAL; + s += rv; + if (*s == '\n') + s++; + if (*s) + return -EINVAL; + *res = _res; + return 0; +} + +/** + * kstrtoull - convert a string to an unsigned long long + * @s: The start of the string. The string must be null-terminated, and may also + * include a single newline before its terminating null. The first character + * may also be a plus sign, but not a minus sign. + * @base: The number base to use. The maximum supported base is 16. If base is + * given as 0, then the base of the string is automatically detected with the + * conventional semantics - If it begins with 0x the number will be parsed as a + * hexadecimal (case insensitive), if it otherwise begins with 0, it will be + * parsed as an octal number. Otherwise it will be parsed as a decimal. + * @res: Where to write the result of the conversion on success. + * + * Returns 0 on success, -ERANGE on overflow and -EINVAL on parsing error. + * Used as a replacement for the obsolete simple_strtoull. Return code must + * be checked. + */ +int kstrtoull(const char *s, unsigned int base, unsigned long long *res) +{ + if (s[0] == '+') + s++; + return _kstrtoull(s, base, res); +} + +static int _kstrtoul(const char *s, unsigned int base, unsigned long *res) +{ + unsigned long long tmp; + int rv; + + rv = kstrtoull(s, base, &tmp); + if (rv < 0) + return rv; + if (tmp != (unsigned long)tmp) + return -ERANGE; + *res = tmp; + return 0; +} + +/** + * kstrtoul - convert a string to an unsigned long + * @s: The start of the string. The string must be null-terminated, and may also + * include a single newline before its terminating null. The first character + * may also be a plus sign, but not a minus sign. + * @base: The number base to use. The maximum supported base is 16. If base is + * given as 0, then the base of the string is automatically detected with the + * conventional semantics - If it begins with 0x the number will be parsed as a + * hexadecimal (case insensitive), if it otherwise begins with 0, it will be + * parsed as an octal number. Otherwise it will be parsed as a decimal. + * @res: Where to write the result of the conversion on success. + * + * Returns 0 on success, -ERANGE on overflow and -EINVAL on parsing error. + * Used as a replacement for the simple_strtoull. + */ +int boot_kstrtoul(const char *s, unsigned int base, unsigned long *res) +{ + /* + * We want to shortcut function call, but + * __builtin_types_compatible_p(unsigned long, unsigned long long) = 0. + */ + if (sizeof(unsigned long) == sizeof(unsigned long long) && + __alignof__(unsigned long) == __alignof__(unsigned long long)) + return kstrtoull(s, base, (unsigned long long *)res); + else + return _kstrtoul(s, base, res); +} diff --git a/arch/x86/boot/string.h b/arch/x86/boot/string.h new file mode 100644 index 000000000..a232da487 --- /dev/null +++ b/arch/x86/boot/string.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef BOOT_STRING_H +#define BOOT_STRING_H + +/* Undef any of these macros coming from string_32.h. */ +#undef memcpy +#undef memset +#undef memcmp + +void *memcpy(void *dst, const void *src, size_t len); +void *memset(void *dst, int c, size_t len); +int memcmp(const void *s1, const void *s2, size_t len); + +/* Access builtin version by default. */ +#define memcpy(d,s,l) __builtin_memcpy(d,s,l) +#define memset(d,c,l) __builtin_memset(d,c,l) +#define memcmp __builtin_memcmp + +extern int strcmp(const char *str1, const char *str2); +extern int strncmp(const char *cs, const char *ct, size_t count); +extern size_t strlen(const char *s); +extern char *strstr(const char *s1, const char *s2); +extern char *strchr(const char *s, int c); +extern size_t strnlen(const char *s, size_t maxlen); +extern unsigned int atou(const char *s); +extern unsigned long long simple_strtoull(const char *cp, char **endp, + unsigned int base); + +int kstrtoull(const char *s, unsigned int base, unsigned long long *res); +int boot_kstrtoul(const char *s, unsigned int base, unsigned long *res); +#endif /* BOOT_STRING_H */ diff --git a/arch/x86/boot/tools/.gitignore b/arch/x86/boot/tools/.gitignore new file mode 100644 index 000000000..ae91f4d0d --- /dev/null +++ b/arch/x86/boot/tools/.gitignore @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +build diff --git a/arch/x86/boot/tools/build.c b/arch/x86/boot/tools/build.c new file mode 100644 index 000000000..a3725ad46 --- /dev/null +++ b/arch/x86/boot/tools/build.c @@ -0,0 +1,500 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright (C) 1997 Martin Mares + * Copyright (C) 2007 H. Peter Anvin + */ + +/* + * This file builds a disk-image from three different files: + * + * - setup: 8086 machine code, sets up system parm + * - system: 80386 code for actual system + * - zoffset.h: header with ZO_* defines + * + * It does some checking that all files are of the correct type, and writes + * the result to the specified destination, removing headers and padding to + * the right amount. It also writes some system data to stdout. + */ + +/* + * Changes by tytso to allow root device specification + * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 + * Cross compiling fixes by Gertjan van Wingerde, July 1996 + * Rewritten by Martin Mares, April 1997 + * Substantially overhauled by H. Peter Anvin, April 2007 + */ + +#include <stdio.h> +#include <string.h> +#include <stdlib.h> +#include <stdarg.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <unistd.h> +#include <fcntl.h> +#include <sys/mman.h> +#include <tools/le_byteshift.h> + +typedef unsigned char u8; +typedef unsigned short u16; +typedef unsigned int u32; + +#define DEFAULT_MAJOR_ROOT 0 +#define DEFAULT_MINOR_ROOT 0 +#define DEFAULT_ROOT_DEV (DEFAULT_MAJOR_ROOT << 8 | DEFAULT_MINOR_ROOT) + +/* Minimal number of setup sectors */ +#define SETUP_SECT_MIN 5 +#define SETUP_SECT_MAX 64 + +/* This must be large enough to hold the entire setup */ +u8 buf[SETUP_SECT_MAX*512]; + +#define PECOFF_RELOC_RESERVE 0x20 + +#ifdef CONFIG_EFI_MIXED +#define PECOFF_COMPAT_RESERVE 0x20 +#else +#define PECOFF_COMPAT_RESERVE 0x0 +#endif + +static unsigned long efi32_stub_entry; +static unsigned long efi64_stub_entry; +static unsigned long efi_pe_entry; +static unsigned long efi32_pe_entry; +static unsigned long kernel_info; +static unsigned long startup_64; +static unsigned long _ehead; +static unsigned long _end; + +/*----------------------------------------------------------------------*/ + +static const u32 crctab32[] = { + 0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419, + 0x706af48f, 0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4, + 0xe0d5e91e, 0x97d2d988, 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, + 0x90bf1d91, 0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de, + 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7, 0x136c9856, + 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9, + 0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4, + 0xa2677172, 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b, + 0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940, 0x32d86ce3, + 0x45df5c75, 0xdcd60dcf, 0xabd13d59, 0x26d930ac, 0x51de003a, + 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423, 0xcfba9599, + 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924, + 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190, + 0x01db7106, 0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f, + 0x9fbfe4a5, 0xe8b8d433, 0x7807c9a2, 0x0f00f934, 0x9609a88e, + 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01, + 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, 0x6c0695ed, + 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950, + 0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, + 0xfbd44c65, 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, + 0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a, + 0x346ed9fc, 0xad678846, 0xda60b8d0, 0x44042d73, 0x33031de5, + 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa, 0xbe0b1010, + 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f, + 0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17, + 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6, + 0x03b6e20c, 0x74b1d29a, 0xead54739, 0x9dd277af, 0x04db2615, + 0x73dc1683, 0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8, + 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1, 0xf00f9344, + 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb, + 0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a, + 0x67dd4acc, 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5, + 0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252, 0xd1bb67f1, + 0xa6bc5767, 0x3fb506dd, 0x48b2364b, 0xd80d2bda, 0xaf0a1b4c, + 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55, 0x316e8eef, + 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236, + 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe, + 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31, + 0x2cd99e8b, 0x5bdeae1d, 0x9b64c2b0, 0xec63f226, 0x756aa39c, + 0x026d930a, 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713, + 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, 0x92d28e9b, + 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242, + 0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1, + 0x18b74777, 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, + 0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45, 0xa00ae278, + 0xd70dd2ee, 0x4e048354, 0x3903b3c2, 0xa7672661, 0xd06016f7, + 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc, 0x40df0b66, + 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9, + 0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605, + 0xcdd70693, 0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8, + 0x5d681b02, 0x2a6f2b94, 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, + 0x2d02ef8d +}; + +static u32 partial_crc32_one(u8 c, u32 crc) +{ + return crctab32[(crc ^ c) & 0xff] ^ (crc >> 8); +} + +static u32 partial_crc32(const u8 *s, int len, u32 crc) +{ + while (len--) + crc = partial_crc32_one(*s++, crc); + return crc; +} + +static void die(const char * str, ...) +{ + va_list args; + va_start(args, str); + vfprintf(stderr, str, args); + va_end(args); + fputc('\n', stderr); + exit(1); +} + +static void usage(void) +{ + die("Usage: build setup system zoffset.h image"); +} + +#ifdef CONFIG_EFI_STUB + +static void update_pecoff_section_header_fields(char *section_name, u32 vma, u32 size, u32 datasz, u32 offset) +{ + unsigned int pe_header; + unsigned short num_sections; + u8 *section; + + pe_header = get_unaligned_le32(&buf[0x3c]); + num_sections = get_unaligned_le16(&buf[pe_header + 6]); + +#ifdef CONFIG_X86_32 + section = &buf[pe_header + 0xa8]; +#else + section = &buf[pe_header + 0xb8]; +#endif + + while (num_sections > 0) { + if (strncmp((char*)section, section_name, 8) == 0) { + /* section header size field */ + put_unaligned_le32(size, section + 0x8); + + /* section header vma field */ + put_unaligned_le32(vma, section + 0xc); + + /* section header 'size of initialised data' field */ + put_unaligned_le32(datasz, section + 0x10); + + /* section header 'file offset' field */ + put_unaligned_le32(offset, section + 0x14); + + break; + } + section += 0x28; + num_sections--; + } +} + +static void update_pecoff_section_header(char *section_name, u32 offset, u32 size) +{ + update_pecoff_section_header_fields(section_name, offset, size, size, offset); +} + +static void update_pecoff_setup_and_reloc(unsigned int size) +{ + u32 setup_offset = 0x200; + u32 reloc_offset = size - PECOFF_RELOC_RESERVE - PECOFF_COMPAT_RESERVE; +#ifdef CONFIG_EFI_MIXED + u32 compat_offset = reloc_offset + PECOFF_RELOC_RESERVE; +#endif + u32 setup_size = reloc_offset - setup_offset; + + update_pecoff_section_header(".setup", setup_offset, setup_size); + update_pecoff_section_header(".reloc", reloc_offset, PECOFF_RELOC_RESERVE); + + /* + * Modify .reloc section contents with a single entry. The + * relocation is applied to offset 10 of the relocation section. + */ + put_unaligned_le32(reloc_offset + 10, &buf[reloc_offset]); + put_unaligned_le32(10, &buf[reloc_offset + 4]); + +#ifdef CONFIG_EFI_MIXED + update_pecoff_section_header(".compat", compat_offset, PECOFF_COMPAT_RESERVE); + + /* + * Put the IA-32 machine type (0x14c) and the associated entry point + * address in the .compat section, so loaders can figure out which other + * execution modes this image supports. + */ + buf[compat_offset] = 0x1; + buf[compat_offset + 1] = 0x8; + put_unaligned_le16(0x14c, &buf[compat_offset + 2]); + put_unaligned_le32(efi32_pe_entry + size, &buf[compat_offset + 4]); +#endif +} + +static void update_pecoff_text(unsigned int text_start, unsigned int file_sz, + unsigned int init_sz) +{ + unsigned int pe_header; + unsigned int text_sz = file_sz - text_start; + unsigned int bss_sz = init_sz - file_sz; + + pe_header = get_unaligned_le32(&buf[0x3c]); + + /* + * The PE/COFF loader may load the image at an address which is + * misaligned with respect to the kernel_alignment field in the setup + * header. + * + * In order to avoid relocating the kernel to correct the misalignment, + * add slack to allow the buffer to be aligned within the declared size + * of the image. + */ + bss_sz += CONFIG_PHYSICAL_ALIGN; + init_sz += CONFIG_PHYSICAL_ALIGN; + + /* + * Size of code: Subtract the size of the first sector (512 bytes) + * which includes the header. + */ + put_unaligned_le32(file_sz - 512 + bss_sz, &buf[pe_header + 0x1c]); + + /* Size of image */ + put_unaligned_le32(init_sz, &buf[pe_header + 0x50]); + + /* + * Address of entry point for PE/COFF executable + */ + put_unaligned_le32(text_start + efi_pe_entry, &buf[pe_header + 0x28]); + + update_pecoff_section_header_fields(".text", text_start, text_sz + bss_sz, + text_sz, text_start); +} + +static int reserve_pecoff_reloc_section(int c) +{ + /* Reserve 0x20 bytes for .reloc section */ + memset(buf+c, 0, PECOFF_RELOC_RESERVE); + return PECOFF_RELOC_RESERVE; +} + +static void efi_stub_defaults(void) +{ + /* Defaults for old kernel */ +#ifdef CONFIG_X86_32 + efi_pe_entry = 0x10; +#else + efi_pe_entry = 0x210; + startup_64 = 0x200; +#endif +} + +static void efi_stub_entry_update(void) +{ + unsigned long addr = efi32_stub_entry; + +#ifdef CONFIG_X86_64 + /* Yes, this is really how we defined it :( */ + addr = efi64_stub_entry - 0x200; +#endif + +#ifdef CONFIG_EFI_MIXED + if (efi32_stub_entry != addr) + die("32-bit and 64-bit EFI entry points do not match\n"); +#endif + put_unaligned_le32(addr, &buf[0x264]); +} + +#else + +static inline void update_pecoff_setup_and_reloc(unsigned int size) {} +static inline void update_pecoff_text(unsigned int text_start, + unsigned int file_sz, + unsigned int init_sz) {} +static inline void efi_stub_defaults(void) {} +static inline void efi_stub_entry_update(void) {} + +static inline int reserve_pecoff_reloc_section(int c) +{ + return 0; +} +#endif /* CONFIG_EFI_STUB */ + +static int reserve_pecoff_compat_section(int c) +{ + /* Reserve 0x20 bytes for .compat section */ + memset(buf+c, 0, PECOFF_COMPAT_RESERVE); + return PECOFF_COMPAT_RESERVE; +} + +/* + * Parse zoffset.h and find the entry points. We could just #include zoffset.h + * but that would mean tools/build would have to be rebuilt every time. It's + * not as if parsing it is hard... + */ +#define PARSE_ZOFS(p, sym) do { \ + if (!strncmp(p, "#define ZO_" #sym " ", 11+sizeof(#sym))) \ + sym = strtoul(p + 11 + sizeof(#sym), NULL, 16); \ +} while (0) + +static void parse_zoffset(char *fname) +{ + FILE *file; + char *p; + int c; + + file = fopen(fname, "r"); + if (!file) + die("Unable to open `%s': %m", fname); + c = fread(buf, 1, sizeof(buf) - 1, file); + if (ferror(file)) + die("read-error on `zoffset.h'"); + fclose(file); + buf[c] = 0; + + p = (char *)buf; + + while (p && *p) { + PARSE_ZOFS(p, efi32_stub_entry); + PARSE_ZOFS(p, efi64_stub_entry); + PARSE_ZOFS(p, efi_pe_entry); + PARSE_ZOFS(p, efi32_pe_entry); + PARSE_ZOFS(p, kernel_info); + PARSE_ZOFS(p, startup_64); + PARSE_ZOFS(p, _ehead); + PARSE_ZOFS(p, _end); + + p = strchr(p, '\n'); + while (p && (*p == '\r' || *p == '\n')) + p++; + } +} + +int main(int argc, char ** argv) +{ + unsigned int i, sz, setup_sectors, init_sz; + int c; + u32 sys_size; + struct stat sb; + FILE *file, *dest; + int fd; + void *kernel; + u32 crc = 0xffffffffUL; + + efi_stub_defaults(); + + if (argc != 5) + usage(); + parse_zoffset(argv[3]); + + dest = fopen(argv[4], "w"); + if (!dest) + die("Unable to write `%s': %m", argv[4]); + + /* Copy the setup code */ + file = fopen(argv[1], "r"); + if (!file) + die("Unable to open `%s': %m", argv[1]); + c = fread(buf, 1, sizeof(buf), file); + if (ferror(file)) + die("read-error on `setup'"); + if (c < 1024) + die("The setup must be at least 1024 bytes"); + if (get_unaligned_le16(&buf[510]) != 0xAA55) + die("Boot block hasn't got boot flag (0xAA55)"); + fclose(file); + + c += reserve_pecoff_compat_section(c); + c += reserve_pecoff_reloc_section(c); + + /* Pad unused space with zeros */ + setup_sectors = (c + 511) / 512; + if (setup_sectors < SETUP_SECT_MIN) + setup_sectors = SETUP_SECT_MIN; + i = setup_sectors*512; + memset(buf+c, 0, i-c); + + update_pecoff_setup_and_reloc(i); + + /* Set the default root device */ + put_unaligned_le16(DEFAULT_ROOT_DEV, &buf[508]); + + /* Open and stat the kernel file */ + fd = open(argv[2], O_RDONLY); + if (fd < 0) + die("Unable to open `%s': %m", argv[2]); + if (fstat(fd, &sb)) + die("Unable to stat `%s': %m", argv[2]); + sz = sb.st_size; + kernel = mmap(NULL, sz, PROT_READ, MAP_SHARED, fd, 0); + if (kernel == MAP_FAILED) + die("Unable to mmap '%s': %m", argv[2]); + /* Number of 16-byte paragraphs, including space for a 4-byte CRC */ + sys_size = (sz + 15 + 4) / 16; +#ifdef CONFIG_EFI_STUB + /* + * COFF requires minimum 32-byte alignment of sections, and + * adding a signature is problematic without that alignment. + */ + sys_size = (sys_size + 1) & ~1; +#endif + + /* Patch the setup code with the appropriate size parameters */ + buf[0x1f1] = setup_sectors-1; + put_unaligned_le32(sys_size, &buf[0x1f4]); + + init_sz = get_unaligned_le32(&buf[0x260]); +#ifdef CONFIG_EFI_STUB + /* + * The decompression buffer will start at ImageBase. When relocating + * the compressed kernel to its end, we must ensure that the head + * section does not get overwritten. The head section occupies + * [i, i + _ehead), and the destination is [init_sz - _end, init_sz). + * + * At present these should never overlap, because 'i' is at most 32k + * because of SETUP_SECT_MAX, '_ehead' is less than 1k, and the + * calculation of INIT_SIZE in boot/header.S ensures that + * 'init_sz - _end' is at least 64k. + * + * For future-proofing, increase init_sz if necessary. + */ + + if (init_sz - _end < i + _ehead) { + init_sz = (i + _ehead + _end + 4095) & ~4095; + put_unaligned_le32(init_sz, &buf[0x260]); + } +#endif + update_pecoff_text(setup_sectors * 512, i + (sys_size * 16), init_sz); + + efi_stub_entry_update(); + + /* Update kernel_info offset. */ + put_unaligned_le32(kernel_info, &buf[0x268]); + + crc = partial_crc32(buf, i, crc); + if (fwrite(buf, 1, i, dest) != i) + die("Writing setup failed"); + + /* Copy the kernel code */ + crc = partial_crc32(kernel, sz, crc); + if (fwrite(kernel, 1, sz, dest) != sz) + die("Writing kernel failed"); + + /* Add padding leaving 4 bytes for the checksum */ + while (sz++ < (sys_size*16) - 4) { + crc = partial_crc32_one('\0', crc); + if (fwrite("\0", 1, 1, dest) != 1) + die("Writing padding failed"); + } + + /* Write the CRC */ + put_unaligned_le32(crc, buf); + if (fwrite(buf, 1, 4, dest) != 4) + die("Writing CRC failed"); + + /* Catch any delayed write failures */ + if (fclose(dest)) + die("Writing image failed"); + + close(fd); + + /* Everything is OK */ + return 0; +} diff --git a/arch/x86/boot/tty.c b/arch/x86/boot/tty.c new file mode 100644 index 000000000..f7eb976b0 --- /dev/null +++ b/arch/x86/boot/tty.c @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * Copyright 2009 Intel Corporation; author H. Peter Anvin + * + * ----------------------------------------------------------------------- */ + +/* + * Very simple screen and serial I/O + */ + +#include "boot.h" + +int early_serial_base; + +#define XMTRDY 0x20 + +#define TXR 0 /* Transmit register (WRITE) */ +#define LSR 5 /* Line Status */ + +/* + * These functions are in .inittext so they can be used to signal + * error during initialization. + */ + +static void __section(".inittext") serial_putchar(int ch) +{ + unsigned timeout = 0xffff; + + while ((inb(early_serial_base + LSR) & XMTRDY) == 0 && --timeout) + cpu_relax(); + + outb(ch, early_serial_base + TXR); +} + +static void __section(".inittext") bios_putchar(int ch) +{ + struct biosregs ireg; + + initregs(&ireg); + ireg.bx = 0x0007; + ireg.cx = 0x0001; + ireg.ah = 0x0e; + ireg.al = ch; + intcall(0x10, &ireg, NULL); +} + +void __section(".inittext") putchar(int ch) +{ + if (ch == '\n') + putchar('\r'); /* \n -> \r\n */ + + bios_putchar(ch); + + if (early_serial_base != 0) + serial_putchar(ch); +} + +void __section(".inittext") puts(const char *str) +{ + while (*str) + putchar(*str++); +} + +/* + * Read the CMOS clock through the BIOS, and return the + * seconds in BCD. + */ + +static u8 gettime(void) +{ + struct biosregs ireg, oreg; + + initregs(&ireg); + ireg.ah = 0x02; + intcall(0x1a, &ireg, &oreg); + + return oreg.dh; +} + +/* + * Read from the keyboard + */ +int getchar(void) +{ + struct biosregs ireg, oreg; + + initregs(&ireg); + /* ireg.ah = 0x00; */ + intcall(0x16, &ireg, &oreg); + + return oreg.al; +} + +static int kbd_pending(void) +{ + struct biosregs ireg, oreg; + + initregs(&ireg); + ireg.ah = 0x01; + intcall(0x16, &ireg, &oreg); + + return !(oreg.eflags & X86_EFLAGS_ZF); +} + +void kbd_flush(void) +{ + for (;;) { + if (!kbd_pending()) + break; + getchar(); + } +} + +int getchar_timeout(void) +{ + int cnt = 30; + int t0, t1; + + t0 = gettime(); + + while (cnt) { + if (kbd_pending()) + return getchar(); + + t1 = gettime(); + if (t0 != t1) { + cnt--; + t0 = t1; + } + } + + return 0; /* Timeout! */ +} + diff --git a/arch/x86/boot/version.c b/arch/x86/boot/version.c new file mode 100644 index 000000000..a1aaaf6c0 --- /dev/null +++ b/arch/x86/boot/version.c @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * ----------------------------------------------------------------------- */ + +/* + * Kernel version string + */ + +#include "boot.h" +#include <generated/utsrelease.h> +#include <generated/compile.h> + +const char kernel_version[] = + UTS_RELEASE " (" LINUX_COMPILE_BY "@" LINUX_COMPILE_HOST ") " + UTS_VERSION; diff --git a/arch/x86/boot/vesa.h b/arch/x86/boot/vesa.h new file mode 100644 index 000000000..9e23fdffb --- /dev/null +++ b/arch/x86/boot/vesa.h @@ -0,0 +1,67 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* ----------------------------------------------------------------------- * + * + * Copyright 1999-2007 H. Peter Anvin - All Rights Reserved + * + * ----------------------------------------------------------------------- */ + +#ifndef BOOT_VESA_H +#define BOOT_VESA_H + +typedef struct { + u16 off, seg; +} far_ptr; + +/* VESA General Information table */ +struct vesa_general_info { + u32 signature; /* 0 Magic number = "VESA" */ + u16 version; /* 4 */ + far_ptr vendor_string; /* 6 */ + u32 capabilities; /* 10 */ + far_ptr video_mode_ptr; /* 14 */ + u16 total_memory; /* 18 */ + + u8 reserved[236]; /* 20 */ +} __attribute__ ((packed)); + +#define VESA_MAGIC ('V' + ('E' << 8) + ('S' << 16) + ('A' << 24)) + +struct vesa_mode_info { + u16 mode_attr; /* 0 */ + u8 win_attr[2]; /* 2 */ + u16 win_grain; /* 4 */ + u16 win_size; /* 6 */ + u16 win_seg[2]; /* 8 */ + far_ptr win_scheme; /* 12 */ + u16 logical_scan; /* 16 */ + + u16 h_res; /* 18 */ + u16 v_res; /* 20 */ + u8 char_width; /* 22 */ + u8 char_height; /* 23 */ + u8 memory_planes; /* 24 */ + u8 bpp; /* 25 */ + u8 banks; /* 26 */ + u8 memory_layout; /* 27 */ + u8 bank_size; /* 28 */ + u8 image_planes; /* 29 */ + u8 page_function; /* 30 */ + + u8 rmask; /* 31 */ + u8 rpos; /* 32 */ + u8 gmask; /* 33 */ + u8 gpos; /* 34 */ + u8 bmask; /* 35 */ + u8 bpos; /* 36 */ + u8 resv_mask; /* 37 */ + u8 resv_pos; /* 38 */ + u8 dcm_info; /* 39 */ + + u32 lfb_ptr; /* 40 Linear frame buffer address */ + u32 offscreen_ptr; /* 44 Offscreen memory address */ + u16 offscreen_size; /* 48 */ + + u8 reserved[206]; /* 50 */ +} __attribute__ ((packed)); + +#endif /* LIB_SYS_VESA_H */ diff --git a/arch/x86/boot/video-bios.c b/arch/x86/boot/video-bios.c new file mode 100644 index 000000000..6eb8c06bc --- /dev/null +++ b/arch/x86/boot/video-bios.c @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * Copyright 2009 Intel Corporation; author H. Peter Anvin + * + * ----------------------------------------------------------------------- */ + +/* + * Standard video BIOS modes + * + * We have two options for this; silent and scanned. + */ + +#include "boot.h" +#include "video.h" + +static __videocard video_bios; + +/* Set a conventional BIOS mode */ +static int set_bios_mode(u8 mode); + +static int bios_set_mode(struct mode_info *mi) +{ + return set_bios_mode(mi->mode - VIDEO_FIRST_BIOS); +} + +static int set_bios_mode(u8 mode) +{ + struct biosregs ireg, oreg; + u8 new_mode; + + initregs(&ireg); + ireg.al = mode; /* AH=0x00 Set Video Mode */ + intcall(0x10, &ireg, NULL); + + ireg.ah = 0x0f; /* Get Current Video Mode */ + intcall(0x10, &ireg, &oreg); + + do_restore = 1; /* Assume video contents were lost */ + + /* Not all BIOSes are clean with the top bit */ + new_mode = oreg.al & 0x7f; + + if (new_mode == mode) + return 0; /* Mode change OK */ + +#ifndef _WAKEUP + if (new_mode != boot_params.screen_info.orig_video_mode) { + /* Mode setting failed, but we didn't end up where we + started. That's bad. Try to revert to the original + video mode. */ + ireg.ax = boot_params.screen_info.orig_video_mode; + intcall(0x10, &ireg, NULL); + } +#endif + return -1; +} + +static int bios_probe(void) +{ + u8 mode; +#ifdef _WAKEUP + u8 saved_mode = 0x03; +#else + u8 saved_mode = boot_params.screen_info.orig_video_mode; +#endif + u16 crtc; + struct mode_info *mi; + int nmodes = 0; + + if (adapter != ADAPTER_EGA && adapter != ADAPTER_VGA) + return 0; + + set_fs(0); + crtc = vga_crtc(); + + video_bios.modes = GET_HEAP(struct mode_info, 0); + + for (mode = 0x14; mode <= 0x7f; mode++) { + if (!heap_free(sizeof(struct mode_info))) + break; + + if (mode_defined(VIDEO_FIRST_BIOS+mode)) + continue; + + if (set_bios_mode(mode)) + continue; + + /* Try to verify that it's a text mode. */ + + /* Attribute Controller: make graphics controller disabled */ + if (in_idx(0x3c0, 0x10) & 0x01) + continue; + + /* Graphics Controller: verify Alpha addressing enabled */ + if (in_idx(0x3ce, 0x06) & 0x01) + continue; + + /* CRTC cursor location low should be zero(?) */ + if (in_idx(crtc, 0x0f)) + continue; + + mi = GET_HEAP(struct mode_info, 1); + mi->mode = VIDEO_FIRST_BIOS+mode; + mi->depth = 0; /* text */ + mi->x = rdfs16(0x44a); + mi->y = rdfs8(0x484)+1; + nmodes++; + } + + set_bios_mode(saved_mode); + + return nmodes; +} + +static __videocard video_bios = +{ + .card_name = "BIOS", + .probe = bios_probe, + .set_mode = bios_set_mode, + .unsafe = 1, + .xmode_first = VIDEO_FIRST_BIOS, + .xmode_n = 0x80, +}; diff --git a/arch/x86/boot/video-mode.c b/arch/x86/boot/video-mode.c new file mode 100644 index 000000000..9ada55dc1 --- /dev/null +++ b/arch/x86/boot/video-mode.c @@ -0,0 +1,171 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007-2008 rPath, Inc. - All Rights Reserved + * + * ----------------------------------------------------------------------- */ + +/* + * arch/i386/boot/video-mode.c + * + * Set the video mode. This is separated out into a different + * file in order to be shared with the ACPI wakeup code. + */ + +#include "boot.h" +#include "video.h" +#include "vesa.h" + +#include <uapi/asm/boot.h> + +/* + * Common variables + */ +int adapter; /* 0=CGA/MDA/HGC, 1=EGA, 2=VGA+ */ +int force_x, force_y; /* Don't query the BIOS for cols/rows */ +int do_restore; /* Screen contents changed during mode flip */ +int graphic_mode; /* Graphic mode with linear frame buffer */ + +/* Probe the video drivers and have them generate their mode lists. */ +void probe_cards(int unsafe) +{ + struct card_info *card; + static u8 probed[2]; + + if (probed[unsafe]) + return; + + probed[unsafe] = 1; + + for (card = video_cards; card < video_cards_end; card++) { + if (card->unsafe == unsafe) { + if (card->probe) + card->nmodes = card->probe(); + else + card->nmodes = 0; + } + } +} + +/* Test if a mode is defined */ +int mode_defined(u16 mode) +{ + struct card_info *card; + struct mode_info *mi; + int i; + + for (card = video_cards; card < video_cards_end; card++) { + mi = card->modes; + for (i = 0; i < card->nmodes; i++, mi++) { + if (mi->mode == mode) + return 1; + } + } + + return 0; +} + +/* Set mode (without recalc) */ +static int raw_set_mode(u16 mode, u16 *real_mode) +{ + int nmode, i; + struct card_info *card; + struct mode_info *mi; + + /* Drop the recalc bit if set */ + mode &= ~VIDEO_RECALC; + + /* Scan for mode based on fixed ID, position, or resolution */ + nmode = 0; + for (card = video_cards; card < video_cards_end; card++) { + mi = card->modes; + for (i = 0; i < card->nmodes; i++, mi++) { + int visible = mi->x || mi->y; + + if ((mode == nmode && visible) || + mode == mi->mode || + mode == (mi->y << 8)+mi->x) { + *real_mode = mi->mode; + return card->set_mode(mi); + } + + if (visible) + nmode++; + } + } + + /* Nothing found? Is it an "exceptional" (unprobed) mode? */ + for (card = video_cards; card < video_cards_end; card++) { + if (mode >= card->xmode_first && + mode < card->xmode_first+card->xmode_n) { + struct mode_info mix; + *real_mode = mix.mode = mode; + mix.x = mix.y = 0; + return card->set_mode(&mix); + } + } + + /* Otherwise, failure... */ + return -1; +} + +/* + * Recalculate the vertical video cutoff (hack!) + */ +static void vga_recalc_vertical(void) +{ + unsigned int font_size, rows; + u16 crtc; + u8 pt, ov; + + set_fs(0); + font_size = rdfs8(0x485); /* BIOS: font size (pixels) */ + rows = force_y ? force_y : rdfs8(0x484)+1; /* Text rows */ + + rows *= font_size; /* Visible scan lines */ + rows--; /* ... minus one */ + + crtc = vga_crtc(); + + pt = in_idx(crtc, 0x11); + pt &= ~0x80; /* Unlock CR0-7 */ + out_idx(pt, crtc, 0x11); + + out_idx((u8)rows, crtc, 0x12); /* Lower height register */ + + ov = in_idx(crtc, 0x07); /* Overflow register */ + ov &= 0xbd; + ov |= (rows >> (8-1)) & 0x02; + ov |= (rows >> (9-6)) & 0x40; + out_idx(ov, crtc, 0x07); +} + +/* Set mode (with recalc if specified) */ +int set_mode(u16 mode) +{ + int rv; + u16 real_mode; + + /* Very special mode numbers... */ + if (mode == VIDEO_CURRENT_MODE) + return 0; /* Nothing to do... */ + else if (mode == NORMAL_VGA) + mode = VIDEO_80x25; + else if (mode == EXTENDED_VGA) + mode = VIDEO_8POINT; + + rv = raw_set_mode(mode, &real_mode); + if (rv) + return rv; + + if (mode & VIDEO_RECALC) + vga_recalc_vertical(); + + /* Save the canonical mode number for the kernel, not + an alias, size specification or menu position */ +#ifndef _WAKEUP + boot_params.hdr.vid_mode = real_mode; +#endif + return 0; +} diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c new file mode 100644 index 000000000..7e185977a --- /dev/null +++ b/arch/x86/boot/video-vesa.c @@ -0,0 +1,279 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * Copyright 2009 Intel Corporation; author H. Peter Anvin + * + * ----------------------------------------------------------------------- */ + +/* + * VESA text modes + */ + +#include "boot.h" +#include "video.h" +#include "vesa.h" +#include "string.h" + +/* VESA information */ +static struct vesa_general_info vginfo; +static struct vesa_mode_info vminfo; + +static __videocard video_vesa; + +#ifndef _WAKEUP +static void vesa_store_mode_params_graphics(void); +#else /* _WAKEUP */ +static inline void vesa_store_mode_params_graphics(void) {} +#endif /* _WAKEUP */ + +static int vesa_probe(void) +{ + struct biosregs ireg, oreg; + u16 mode; + addr_t mode_ptr; + struct mode_info *mi; + int nmodes = 0; + + video_vesa.modes = GET_HEAP(struct mode_info, 0); + + initregs(&ireg); + ireg.ax = 0x4f00; + ireg.di = (size_t)&vginfo; + intcall(0x10, &ireg, &oreg); + + if (oreg.ax != 0x004f || + vginfo.signature != VESA_MAGIC || + vginfo.version < 0x0102) + return 0; /* Not present */ + + set_fs(vginfo.video_mode_ptr.seg); + mode_ptr = vginfo.video_mode_ptr.off; + + while ((mode = rdfs16(mode_ptr)) != 0xffff) { + mode_ptr += 2; + + if (!heap_free(sizeof(struct mode_info))) + break; /* Heap full, can't save mode info */ + + if (mode & ~0x1ff) + continue; + + memset(&vminfo, 0, sizeof(vminfo)); /* Just in case... */ + + ireg.ax = 0x4f01; + ireg.cx = mode; + ireg.di = (size_t)&vminfo; + intcall(0x10, &ireg, &oreg); + + if (oreg.ax != 0x004f) + continue; + + if ((vminfo.mode_attr & 0x15) == 0x05) { + /* Text Mode, TTY BIOS supported, + supported by hardware */ + mi = GET_HEAP(struct mode_info, 1); + mi->mode = mode + VIDEO_FIRST_VESA; + mi->depth = 0; /* text */ + mi->x = vminfo.h_res; + mi->y = vminfo.v_res; + nmodes++; + } else if ((vminfo.mode_attr & 0x99) == 0x99 && + (vminfo.memory_layout == 4 || + vminfo.memory_layout == 6) && + vminfo.memory_planes == 1) { +#ifdef CONFIG_FB_BOOT_VESA_SUPPORT + /* Graphics mode, color, linear frame buffer + supported. Only register the mode if + if framebuffer is configured, however, + otherwise the user will be left without a screen. */ + mi = GET_HEAP(struct mode_info, 1); + mi->mode = mode + VIDEO_FIRST_VESA; + mi->depth = vminfo.bpp; + mi->x = vminfo.h_res; + mi->y = vminfo.v_res; + nmodes++; +#endif + } + } + + return nmodes; +} + +static int vesa_set_mode(struct mode_info *mode) +{ + struct biosregs ireg, oreg; + int is_graphic; + u16 vesa_mode = mode->mode - VIDEO_FIRST_VESA; + + memset(&vminfo, 0, sizeof(vminfo)); /* Just in case... */ + + initregs(&ireg); + ireg.ax = 0x4f01; + ireg.cx = vesa_mode; + ireg.di = (size_t)&vminfo; + intcall(0x10, &ireg, &oreg); + + if (oreg.ax != 0x004f) + return -1; + + if ((vminfo.mode_attr & 0x15) == 0x05) { + /* It's a supported text mode */ + is_graphic = 0; +#ifdef CONFIG_FB_BOOT_VESA_SUPPORT + } else if ((vminfo.mode_attr & 0x99) == 0x99) { + /* It's a graphics mode with linear frame buffer */ + is_graphic = 1; + vesa_mode |= 0x4000; /* Request linear frame buffer */ +#endif + } else { + return -1; /* Invalid mode */ + } + + + initregs(&ireg); + ireg.ax = 0x4f02; + ireg.bx = vesa_mode; + intcall(0x10, &ireg, &oreg); + + if (oreg.ax != 0x004f) + return -1; + + graphic_mode = is_graphic; + if (!is_graphic) { + /* Text mode */ + force_x = mode->x; + force_y = mode->y; + do_restore = 1; + } else { + /* Graphics mode */ + vesa_store_mode_params_graphics(); + } + + return 0; +} + + +#ifndef _WAKEUP + +/* Switch DAC to 8-bit mode */ +static void vesa_dac_set_8bits(void) +{ + struct biosregs ireg, oreg; + u8 dac_size = 6; + + /* If possible, switch the DAC to 8-bit mode */ + if (vginfo.capabilities & 1) { + initregs(&ireg); + ireg.ax = 0x4f08; + ireg.bh = 0x08; + intcall(0x10, &ireg, &oreg); + if (oreg.ax == 0x004f) + dac_size = oreg.bh; + } + + /* Set the color sizes to the DAC size, and offsets to 0 */ + boot_params.screen_info.red_size = dac_size; + boot_params.screen_info.green_size = dac_size; + boot_params.screen_info.blue_size = dac_size; + boot_params.screen_info.rsvd_size = dac_size; + + boot_params.screen_info.red_pos = 0; + boot_params.screen_info.green_pos = 0; + boot_params.screen_info.blue_pos = 0; + boot_params.screen_info.rsvd_pos = 0; +} + +/* Save the VESA protected mode info */ +static void vesa_store_pm_info(void) +{ + struct biosregs ireg, oreg; + + initregs(&ireg); + ireg.ax = 0x4f0a; + intcall(0x10, &ireg, &oreg); + + if (oreg.ax != 0x004f) + return; + + boot_params.screen_info.vesapm_seg = oreg.es; + boot_params.screen_info.vesapm_off = oreg.di; +} + +/* + * Save video mode parameters for graphics mode + */ +static void vesa_store_mode_params_graphics(void) +{ + /* Tell the kernel we're in VESA graphics mode */ + boot_params.screen_info.orig_video_isVGA = VIDEO_TYPE_VLFB; + + /* Mode parameters */ + boot_params.screen_info.vesa_attributes = vminfo.mode_attr; + boot_params.screen_info.lfb_linelength = vminfo.logical_scan; + boot_params.screen_info.lfb_width = vminfo.h_res; + boot_params.screen_info.lfb_height = vminfo.v_res; + boot_params.screen_info.lfb_depth = vminfo.bpp; + boot_params.screen_info.pages = vminfo.image_planes; + boot_params.screen_info.lfb_base = vminfo.lfb_ptr; + memcpy(&boot_params.screen_info.red_size, + &vminfo.rmask, 8); + + /* General parameters */ + boot_params.screen_info.lfb_size = vginfo.total_memory; + + if (vminfo.bpp <= 8) + vesa_dac_set_8bits(); + + vesa_store_pm_info(); +} + +/* + * Save EDID information for the kernel; this is invoked, separately, + * after mode-setting. + */ +void vesa_store_edid(void) +{ +#ifdef CONFIG_FIRMWARE_EDID + struct biosregs ireg, oreg; + + /* Apparently used as a nonsense token... */ + memset(&boot_params.edid_info, 0x13, sizeof(boot_params.edid_info)); + + if (vginfo.version < 0x0200) + return; /* EDID requires VBE 2.0+ */ + + initregs(&ireg); + ireg.ax = 0x4f15; /* VBE DDC */ + /* ireg.bx = 0x0000; */ /* Report DDC capabilities */ + /* ireg.cx = 0; */ /* Controller 0 */ + ireg.es = 0; /* ES:DI must be 0 by spec */ + intcall(0x10, &ireg, &oreg); + + if (oreg.ax != 0x004f) + return; /* No EDID */ + + /* BH = time in seconds to transfer EDD information */ + /* BL = DDC level supported */ + + ireg.ax = 0x4f15; /* VBE DDC */ + ireg.bx = 0x0001; /* Read EDID */ + /* ireg.cx = 0; */ /* Controller 0 */ + /* ireg.dx = 0; */ /* EDID block number */ + ireg.es = ds(); + ireg.di =(size_t)&boot_params.edid_info; /* (ES:)Pointer to block */ + intcall(0x10, &ireg, &oreg); +#endif /* CONFIG_FIRMWARE_EDID */ +} + +#endif /* not _WAKEUP */ + +static __videocard video_vesa = +{ + .card_name = "VESA", + .probe = vesa_probe, + .set_mode = vesa_set_mode, + .xmode_first = VIDEO_FIRST_VESA, + .xmode_n = 0x200, +}; diff --git a/arch/x86/boot/video-vga.c b/arch/x86/boot/video-vga.c new file mode 100644 index 000000000..4816cb9cf --- /dev/null +++ b/arch/x86/boot/video-vga.c @@ -0,0 +1,286 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * Copyright 2009 Intel Corporation; author H. Peter Anvin + * + * ----------------------------------------------------------------------- */ + +/* + * Common all-VGA modes + */ + +#include "boot.h" +#include "video.h" + +static struct mode_info vga_modes[] = { + { VIDEO_80x25, 80, 25, 0 }, + { VIDEO_8POINT, 80, 50, 0 }, + { VIDEO_80x43, 80, 43, 0 }, + { VIDEO_80x28, 80, 28, 0 }, + { VIDEO_80x30, 80, 30, 0 }, + { VIDEO_80x34, 80, 34, 0 }, + { VIDEO_80x60, 80, 60, 0 }, +}; + +static struct mode_info ega_modes[] = { + { VIDEO_80x25, 80, 25, 0 }, + { VIDEO_8POINT, 80, 43, 0 }, +}; + +static struct mode_info cga_modes[] = { + { VIDEO_80x25, 80, 25, 0 }, +}; + +static __videocard video_vga; + +/* Set basic 80x25 mode */ +static u8 vga_set_basic_mode(void) +{ + struct biosregs ireg, oreg; + u8 mode; + + initregs(&ireg); + + /* Query current mode */ + ireg.ax = 0x0f00; + intcall(0x10, &ireg, &oreg); + mode = oreg.al; + + if (mode != 3 && mode != 7) + mode = 3; + + /* Set the mode */ + ireg.ax = mode; /* AH=0: set mode */ + intcall(0x10, &ireg, NULL); + do_restore = 1; + return mode; +} + +static void vga_set_8font(void) +{ + /* Set 8x8 font - 80x43 on EGA, 80x50 on VGA */ + struct biosregs ireg; + + initregs(&ireg); + + /* Set 8x8 font */ + ireg.ax = 0x1112; + /* ireg.bl = 0; */ + intcall(0x10, &ireg, NULL); + + /* Use alternate print screen */ + ireg.ax = 0x1200; + ireg.bl = 0x20; + intcall(0x10, &ireg, NULL); + + /* Turn off cursor emulation */ + ireg.ax = 0x1201; + ireg.bl = 0x34; + intcall(0x10, &ireg, NULL); + + /* Cursor is scan lines 6-7 */ + ireg.ax = 0x0100; + ireg.cx = 0x0607; + intcall(0x10, &ireg, NULL); +} + +static void vga_set_14font(void) +{ + /* Set 9x14 font - 80x28 on VGA */ + struct biosregs ireg; + + initregs(&ireg); + + /* Set 9x14 font */ + ireg.ax = 0x1111; + /* ireg.bl = 0; */ + intcall(0x10, &ireg, NULL); + + /* Turn off cursor emulation */ + ireg.ax = 0x1201; + ireg.bl = 0x34; + intcall(0x10, &ireg, NULL); + + /* Cursor is scan lines 11-12 */ + ireg.ax = 0x0100; + ireg.cx = 0x0b0c; + intcall(0x10, &ireg, NULL); +} + +static void vga_set_80x43(void) +{ + /* Set 80x43 mode on VGA (not EGA) */ + struct biosregs ireg; + + initregs(&ireg); + + /* Set 350 scans */ + ireg.ax = 0x1201; + ireg.bl = 0x30; + intcall(0x10, &ireg, NULL); + + /* Reset video mode */ + ireg.ax = 0x0003; + intcall(0x10, &ireg, NULL); + + vga_set_8font(); +} + +/* I/O address of the VGA CRTC */ +u16 vga_crtc(void) +{ + return (inb(0x3cc) & 1) ? 0x3d4 : 0x3b4; +} + +static void vga_set_480_scanlines(void) +{ + u16 crtc; /* CRTC base address */ + u8 csel; /* CRTC miscellaneous output register */ + + crtc = vga_crtc(); + + out_idx(0x0c, crtc, 0x11); /* Vertical sync end, unlock CR0-7 */ + out_idx(0x0b, crtc, 0x06); /* Vertical total */ + out_idx(0x3e, crtc, 0x07); /* Vertical overflow */ + out_idx(0xea, crtc, 0x10); /* Vertical sync start */ + out_idx(0xdf, crtc, 0x12); /* Vertical display end */ + out_idx(0xe7, crtc, 0x15); /* Vertical blank start */ + out_idx(0x04, crtc, 0x16); /* Vertical blank end */ + csel = inb(0x3cc); + csel &= 0x0d; + csel |= 0xe2; + outb(csel, 0x3c2); +} + +static void vga_set_vertical_end(int lines) +{ + u16 crtc; /* CRTC base address */ + u8 ovfw; /* CRTC overflow register */ + int end = lines-1; + + crtc = vga_crtc(); + + ovfw = 0x3c | ((end >> (8-1)) & 0x02) | ((end >> (9-6)) & 0x40); + + out_idx(ovfw, crtc, 0x07); /* Vertical overflow */ + out_idx(end, crtc, 0x12); /* Vertical display end */ +} + +static void vga_set_80x30(void) +{ + vga_set_480_scanlines(); + vga_set_vertical_end(30*16); +} + +static void vga_set_80x34(void) +{ + vga_set_480_scanlines(); + vga_set_14font(); + vga_set_vertical_end(34*14); +} + +static void vga_set_80x60(void) +{ + vga_set_480_scanlines(); + vga_set_8font(); + vga_set_vertical_end(60*8); +} + +static int vga_set_mode(struct mode_info *mode) +{ + /* Set the basic mode */ + vga_set_basic_mode(); + + /* Override a possibly broken BIOS */ + force_x = mode->x; + force_y = mode->y; + + switch (mode->mode) { + case VIDEO_80x25: + break; + case VIDEO_8POINT: + vga_set_8font(); + break; + case VIDEO_80x43: + vga_set_80x43(); + break; + case VIDEO_80x28: + vga_set_14font(); + break; + case VIDEO_80x30: + vga_set_80x30(); + break; + case VIDEO_80x34: + vga_set_80x34(); + break; + case VIDEO_80x60: + vga_set_80x60(); + break; + } + + return 0; +} + +/* + * Note: this probe includes basic information required by all + * systems. It should be executed first, by making sure + * video-vga.c is listed first in the Makefile. + */ +static int vga_probe(void) +{ + static const char *card_name[] = { + "CGA/MDA/HGC", "EGA", "VGA" + }; + static struct mode_info *mode_lists[] = { + cga_modes, + ega_modes, + vga_modes, + }; + static int mode_count[] = { + ARRAY_SIZE(cga_modes), + ARRAY_SIZE(ega_modes), + ARRAY_SIZE(vga_modes), + }; + + struct biosregs ireg, oreg; + + initregs(&ireg); + + ireg.ax = 0x1200; + ireg.bl = 0x10; /* Check EGA/VGA */ + intcall(0x10, &ireg, &oreg); + +#ifndef _WAKEUP + boot_params.screen_info.orig_video_ega_bx = oreg.bx; +#endif + + /* If we have MDA/CGA/HGC then BL will be unchanged at 0x10 */ + if (oreg.bl != 0x10) { + /* EGA/VGA */ + ireg.ax = 0x1a00; + intcall(0x10, &ireg, &oreg); + + if (oreg.al == 0x1a) { + adapter = ADAPTER_VGA; +#ifndef _WAKEUP + boot_params.screen_info.orig_video_isVGA = 1; +#endif + } else { + adapter = ADAPTER_EGA; + } + } else { + adapter = ADAPTER_CGA; + } + + video_vga.modes = mode_lists[adapter]; + video_vga.card_name = card_name[adapter]; + return mode_count[adapter]; +} + +static __videocard video_vga = { + .card_name = "VGA", + .probe = vga_probe, + .set_mode = vga_set_mode, +}; diff --git a/arch/x86/boot/video.c b/arch/x86/boot/video.c new file mode 100644 index 000000000..f2e96905b --- /dev/null +++ b/arch/x86/boot/video.c @@ -0,0 +1,343 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * Copyright 2009 Intel Corporation; author H. Peter Anvin + * + * ----------------------------------------------------------------------- */ + +/* + * Select video mode + */ + +#include <uapi/asm/boot.h> + +#include "boot.h" +#include "video.h" +#include "vesa.h" + +static u16 video_segment; + +static void store_cursor_position(void) +{ + struct biosregs ireg, oreg; + + initregs(&ireg); + ireg.ah = 0x03; + intcall(0x10, &ireg, &oreg); + + boot_params.screen_info.orig_x = oreg.dl; + boot_params.screen_info.orig_y = oreg.dh; + + if (oreg.ch & 0x20) + boot_params.screen_info.flags |= VIDEO_FLAGS_NOCURSOR; + + if ((oreg.ch & 0x1f) > (oreg.cl & 0x1f)) + boot_params.screen_info.flags |= VIDEO_FLAGS_NOCURSOR; +} + +static void store_video_mode(void) +{ + struct biosregs ireg, oreg; + + /* N.B.: the saving of the video page here is a bit silly, + since we pretty much assume page 0 everywhere. */ + initregs(&ireg); + ireg.ah = 0x0f; + intcall(0x10, &ireg, &oreg); + + /* Not all BIOSes are clean with respect to the top bit */ + boot_params.screen_info.orig_video_mode = oreg.al & 0x7f; + boot_params.screen_info.orig_video_page = oreg.bh; +} + +/* + * Store the video mode parameters for later usage by the kernel. + * This is done by asking the BIOS except for the rows/columns + * parameters in the default 80x25 mode -- these are set directly, + * because some very obscure BIOSes supply insane values. + */ +static void store_mode_params(void) +{ + u16 font_size; + int x, y; + + /* For graphics mode, it is up to the mode-setting driver + (currently only video-vesa.c) to store the parameters */ + if (graphic_mode) + return; + + store_cursor_position(); + store_video_mode(); + + if (boot_params.screen_info.orig_video_mode == 0x07) { + /* MDA, HGC, or VGA in monochrome mode */ + video_segment = 0xb000; + } else { + /* CGA, EGA, VGA and so forth */ + video_segment = 0xb800; + } + + set_fs(0); + font_size = rdfs16(0x485); /* Font size, BIOS area */ + boot_params.screen_info.orig_video_points = font_size; + + x = rdfs16(0x44a); + y = (adapter == ADAPTER_CGA) ? 25 : rdfs8(0x484)+1; + + if (force_x) + x = force_x; + if (force_y) + y = force_y; + + boot_params.screen_info.orig_video_cols = x; + boot_params.screen_info.orig_video_lines = y; +} + +static unsigned int get_entry(void) +{ + char entry_buf[4]; + int i, len = 0; + int key; + unsigned int v; + + do { + key = getchar(); + + if (key == '\b') { + if (len > 0) { + puts("\b \b"); + len--; + } + } else if ((key >= '0' && key <= '9') || + (key >= 'A' && key <= 'Z') || + (key >= 'a' && key <= 'z')) { + if (len < sizeof(entry_buf)) { + entry_buf[len++] = key; + putchar(key); + } + } + } while (key != '\r'); + putchar('\n'); + + if (len == 0) + return VIDEO_CURRENT_MODE; /* Default */ + + v = 0; + for (i = 0; i < len; i++) { + v <<= 4; + key = entry_buf[i] | 0x20; + v += (key > '9') ? key-'a'+10 : key-'0'; + } + + return v; +} + +static void display_menu(void) +{ + struct card_info *card; + struct mode_info *mi; + char ch; + int i; + int nmodes; + int modes_per_line; + int col; + + nmodes = 0; + for (card = video_cards; card < video_cards_end; card++) + nmodes += card->nmodes; + + modes_per_line = 1; + if (nmodes >= 20) + modes_per_line = 3; + + for (col = 0; col < modes_per_line; col++) + puts("Mode: Resolution: Type: "); + putchar('\n'); + + col = 0; + ch = '0'; + for (card = video_cards; card < video_cards_end; card++) { + mi = card->modes; + for (i = 0; i < card->nmodes; i++, mi++) { + char resbuf[32]; + int visible = mi->x && mi->y; + u16 mode_id = mi->mode ? mi->mode : + (mi->y << 8)+mi->x; + + if (!visible) + continue; /* Hidden mode */ + + if (mi->depth) + sprintf(resbuf, "%dx%d", mi->y, mi->depth); + else + sprintf(resbuf, "%d", mi->y); + + printf("%c %03X %4dx%-7s %-6s", + ch, mode_id, mi->x, resbuf, card->card_name); + col++; + if (col >= modes_per_line) { + putchar('\n'); + col = 0; + } + + if (ch == '9') + ch = 'a'; + else if (ch == 'z' || ch == ' ') + ch = ' '; /* Out of keys... */ + else + ch++; + } + } + if (col) + putchar('\n'); +} + +#define H(x) ((x)-'a'+10) +#define SCAN ((H('s')<<12)+(H('c')<<8)+(H('a')<<4)+H('n')) + +static unsigned int mode_menu(void) +{ + int key; + unsigned int sel; + + puts("Press <ENTER> to see video modes available, " + "<SPACE> to continue, or wait 30 sec\n"); + + kbd_flush(); + while (1) { + key = getchar_timeout(); + if (key == ' ' || key == 0) + return VIDEO_CURRENT_MODE; /* Default */ + if (key == '\r') + break; + putchar('\a'); /* Beep! */ + } + + + for (;;) { + display_menu(); + + puts("Enter a video mode or \"scan\" to scan for " + "additional modes: "); + sel = get_entry(); + if (sel != SCAN) + return sel; + + probe_cards(1); + } +} + +/* Save screen content to the heap */ +static struct saved_screen { + int x, y; + int curx, cury; + u16 *data; +} saved; + +static void save_screen(void) +{ + /* Should be called after store_mode_params() */ + saved.x = boot_params.screen_info.orig_video_cols; + saved.y = boot_params.screen_info.orig_video_lines; + saved.curx = boot_params.screen_info.orig_x; + saved.cury = boot_params.screen_info.orig_y; + + if (!heap_free(saved.x*saved.y*sizeof(u16)+512)) + return; /* Not enough heap to save the screen */ + + saved.data = GET_HEAP(u16, saved.x*saved.y); + + set_fs(video_segment); + copy_from_fs(saved.data, 0, saved.x*saved.y*sizeof(u16)); +} + +static void restore_screen(void) +{ + /* Should be called after store_mode_params() */ + int xs = boot_params.screen_info.orig_video_cols; + int ys = boot_params.screen_info.orig_video_lines; + int y; + addr_t dst = 0; + u16 *src = saved.data; + struct biosregs ireg; + + if (graphic_mode) + return; /* Can't restore onto a graphic mode */ + + if (!src) + return; /* No saved screen contents */ + + /* Restore screen contents */ + + set_fs(video_segment); + for (y = 0; y < ys; y++) { + int npad; + + if (y < saved.y) { + int copy = (xs < saved.x) ? xs : saved.x; + copy_to_fs(dst, src, copy*sizeof(u16)); + dst += copy*sizeof(u16); + src += saved.x; + npad = (xs < saved.x) ? 0 : xs-saved.x; + } else { + npad = xs; + } + + /* Writes "npad" blank characters to + video_segment:dst and advances dst */ + asm volatile("pushw %%es ; " + "movw %2,%%es ; " + "shrw %%cx ; " + "jnc 1f ; " + "stosw \n\t" + "1: rep;stosl ; " + "popw %%es" + : "+D" (dst), "+c" (npad) + : "bdS" (video_segment), + "a" (0x07200720)); + } + + /* Restore cursor position */ + if (saved.curx >= xs) + saved.curx = xs-1; + if (saved.cury >= ys) + saved.cury = ys-1; + + initregs(&ireg); + ireg.ah = 0x02; /* Set cursor position */ + ireg.dh = saved.cury; + ireg.dl = saved.curx; + intcall(0x10, &ireg, NULL); + + store_cursor_position(); +} + +void set_video(void) +{ + u16 mode = boot_params.hdr.vid_mode; + + RESET_HEAP(); + + store_mode_params(); + save_screen(); + probe_cards(0); + + for (;;) { + if (mode == ASK_VGA) + mode = mode_menu(); + + if (!set_mode(mode)) + break; + + printf("Undefined video mode number: %x\n", mode); + mode = ASK_VGA; + } + boot_params.hdr.vid_mode = mode; + vesa_store_edid(); + store_mode_params(); + + if (do_restore) + restore_screen(); +} diff --git a/arch/x86/boot/video.h b/arch/x86/boot/video.h new file mode 100644 index 000000000..04bde0bb2 --- /dev/null +++ b/arch/x86/boot/video.h @@ -0,0 +1,118 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* -*- linux-c -*- ------------------------------------------------------- * + * + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright 2007 rPath, Inc. - All Rights Reserved + * + * ----------------------------------------------------------------------- */ + +/* + * Header file for the real-mode video probing code + */ + +#ifndef BOOT_VIDEO_H +#define BOOT_VIDEO_H + +#include <linux/types.h> + +/* + * This code uses an extended set of video mode numbers. These include: + * Aliases for standard modes + * NORMAL_VGA (-1) + * EXTENDED_VGA (-2) + * ASK_VGA (-3) + * Video modes numbered by menu position -- NOT RECOMMENDED because of lack + * of compatibility when extending the table. These are between 0x00 and 0xff. + */ +#define VIDEO_FIRST_MENU 0x0000 + +/* Standard BIOS video modes (BIOS number + 0x0100) */ +#define VIDEO_FIRST_BIOS 0x0100 + +/* VESA BIOS video modes (VESA number + 0x0200) */ +#define VIDEO_FIRST_VESA 0x0200 + +/* Video7 special modes (BIOS number + 0x0900) */ +#define VIDEO_FIRST_V7 0x0900 + +/* Special video modes */ +#define VIDEO_FIRST_SPECIAL 0x0f00 +#define VIDEO_80x25 0x0f00 +#define VIDEO_8POINT 0x0f01 +#define VIDEO_80x43 0x0f02 +#define VIDEO_80x28 0x0f03 +#define VIDEO_CURRENT_MODE 0x0f04 +#define VIDEO_80x30 0x0f05 +#define VIDEO_80x34 0x0f06 +#define VIDEO_80x60 0x0f07 +#define VIDEO_GFX_HACK 0x0f08 +#define VIDEO_LAST_SPECIAL 0x0f09 + +/* Video modes given by resolution */ +#define VIDEO_FIRST_RESOLUTION 0x1000 + +/* The "recalculate timings" flag */ +#define VIDEO_RECALC 0x8000 + +void store_screen(void); +#define DO_STORE() store_screen() + +/* + * Mode table structures + */ + +struct mode_info { + u16 mode; /* Mode number (vga= style) */ + u16 x, y; /* Width, height */ + u16 depth; /* Bits per pixel, 0 for text mode */ +}; + +struct card_info { + const char *card_name; + int (*set_mode)(struct mode_info *mode); + int (*probe)(void); + struct mode_info *modes; + int nmodes; /* Number of probed modes so far */ + int unsafe; /* Probing is unsafe, only do after "scan" */ + u16 xmode_first; /* Unprobed modes to try to call anyway */ + u16 xmode_n; /* Size of unprobed mode range */ +}; + +#define __videocard struct card_info __section(".videocards") __attribute__((used)) +extern struct card_info video_cards[], video_cards_end[]; + +int mode_defined(u16 mode); /* video.c */ + +/* Basic video information */ +#define ADAPTER_CGA 0 /* CGA/MDA/HGC */ +#define ADAPTER_EGA 1 +#define ADAPTER_VGA 2 + +extern int adapter; +extern int force_x, force_y; /* Don't query the BIOS for cols/rows */ +extern int do_restore; /* Restore screen contents */ +extern int graphic_mode; /* Graphics mode with linear frame buffer */ + +/* Accessing VGA indexed registers */ +static inline u8 in_idx(u16 port, u8 index) +{ + outb(index, port); + return inb(port+1); +} + +static inline void out_idx(u8 v, u16 port, u8 index) +{ + outw(index+(v << 8), port); +} + +/* Writes a value to an indexed port and then reads the port again */ +static inline u8 tst_idx(u8 v, u16 port, u8 index) +{ + out_idx(port, index, v); + return in_idx(port, index); +} + +/* Get the I/O port of the VGA CRTC */ +u16 vga_crtc(void); /* video-vga.c */ + +#endif /* BOOT_VIDEO_H */ |