diff options
Diffstat (limited to 'arch/x86/entry/vdso/vdso32')
| -rw-r--r-- | arch/x86/entry/vdso/vdso32/.gitignore | 2 | ||||
| -rw-r--r-- | arch/x86/entry/vdso/vdso32/note.S | 18 | ||||
| -rw-r--r-- | arch/x86/entry/vdso/vdso32/sigreturn.S | 138 | ||||
| -rw-r--r-- | arch/x86/entry/vdso/vdso32/system_call.S | 85 | ||||
| -rw-r--r-- | arch/x86/entry/vdso/vdso32/vclock_gettime.c | 29 | ||||
| -rw-r--r-- | arch/x86/entry/vdso/vdso32/vdso32.lds.S | 40 |
6 files changed, 312 insertions, 0 deletions
diff --git a/arch/x86/entry/vdso/vdso32/.gitignore b/arch/x86/entry/vdso/vdso32/.gitignore new file mode 100644 index 000000000..516738484 --- /dev/null +++ b/arch/x86/entry/vdso/vdso32/.gitignore @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +vdso32.lds diff --git a/arch/x86/entry/vdso/vdso32/note.S b/arch/x86/entry/vdso/vdso32/note.S new file mode 100644 index 000000000..2cbd39939 --- /dev/null +++ b/arch/x86/entry/vdso/vdso32/note.S @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This supplies .note.* sections to go into the PT_NOTE inside the vDSO text. + * Here we can supply some information useful to userland. + */ + +#include <linux/build-salt.h> +#include <linux/version.h> +#include <linux/elfnote.h> + +/* Ideally this would use UTS_NAME, but using a quoted string here + doesn't work. Remember to change this when changing the + kernel's name. */ +ELFNOTE_START(Linux, 0, "a") + .long LINUX_VERSION_CODE +ELFNOTE_END + +BUILD_SALT diff --git a/arch/x86/entry/vdso/vdso32/sigreturn.S b/arch/x86/entry/vdso/vdso32/sigreturn.S new file mode 100644 index 000000000..c3233ee98 --- /dev/null +++ b/arch/x86/entry/vdso/vdso32/sigreturn.S @@ -0,0 +1,138 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#include <linux/linkage.h> +#include <asm/unistd_32.h> +#include <asm/asm-offsets.h> + +#ifndef SYSCALL_ENTER_KERNEL +#define SYSCALL_ENTER_KERNEL int $0x80 +#endif + + .text + .globl __kernel_sigreturn + .type __kernel_sigreturn,@function + nop /* this guy is needed for .LSTARTFDEDLSI1 below (watch for HACK) */ + ALIGN +__kernel_sigreturn: +.LSTART_sigreturn: + popl %eax /* XXX does this mean it needs unwind info? */ + movl $__NR_sigreturn, %eax + SYSCALL_ENTER_KERNEL +.LEND_sigreturn: + nop + .size __kernel_sigreturn,.-.LSTART_sigreturn + + .globl __kernel_rt_sigreturn + .type __kernel_rt_sigreturn,@function + ALIGN +__kernel_rt_sigreturn: +.LSTART_rt_sigreturn: + movl $__NR_rt_sigreturn, %eax + SYSCALL_ENTER_KERNEL +.LEND_rt_sigreturn: + nop + .size __kernel_rt_sigreturn,.-.LSTART_rt_sigreturn + .previous + + .section .eh_frame,"a",@progbits +.LSTARTFRAMEDLSI1: + .long .LENDCIEDLSI1-.LSTARTCIEDLSI1 +.LSTARTCIEDLSI1: + .long 0 /* CIE ID */ + .byte 1 /* Version number */ + .string "zRS" /* NUL-terminated augmentation string */ + .uleb128 1 /* Code alignment factor */ + .sleb128 -4 /* Data alignment factor */ + .byte 8 /* Return address register column */ + .uleb128 1 /* Augmentation value length */ + .byte 0x1b /* DW_EH_PE_pcrel|DW_EH_PE_sdata4. */ + .byte 0 /* DW_CFA_nop */ + .align 4 +.LENDCIEDLSI1: + .long .LENDFDEDLSI1-.LSTARTFDEDLSI1 /* Length FDE */ +.LSTARTFDEDLSI1: + .long .LSTARTFDEDLSI1-.LSTARTFRAMEDLSI1 /* CIE pointer */ + /* HACK: The dwarf2 unwind routines will subtract 1 from the + return address to get an address in the middle of the + presumed call instruction. Since we didn't get here via + a call, we need to include the nop before the real start + to make up for it. */ + .long .LSTART_sigreturn-1-. /* PC-relative start address */ + .long .LEND_sigreturn-.LSTART_sigreturn+1 + .uleb128 0 /* Augmentation */ + /* What follows are the instructions for the table generation. + We record the locations of each register saved. This is + complicated by the fact that the "CFA" is always assumed to + be the value of the stack pointer in the caller. This means + that we must define the CFA of this body of code to be the + saved value of the stack pointer in the sigcontext. Which + also means that there is no fixed relation to the other + saved registers, which means that we must use DW_CFA_expression + to compute their addresses. It also means that when we + adjust the stack with the popl, we have to do it all over again. */ + +#define do_cfa_expr(offset) \ + .byte 0x0f; /* DW_CFA_def_cfa_expression */ \ + .uleb128 1f-0f; /* length */ \ +0: .byte 0x74; /* DW_OP_breg4 */ \ + .sleb128 offset; /* offset */ \ + .byte 0x06; /* DW_OP_deref */ \ +1: + +#define do_expr(regno, offset) \ + .byte 0x10; /* DW_CFA_expression */ \ + .uleb128 regno; /* regno */ \ + .uleb128 1f-0f; /* length */ \ +0: .byte 0x74; /* DW_OP_breg4 */ \ + .sleb128 offset; /* offset */ \ +1: + + do_cfa_expr(IA32_SIGCONTEXT_sp+4) + do_expr(0, IA32_SIGCONTEXT_ax+4) + do_expr(1, IA32_SIGCONTEXT_cx+4) + do_expr(2, IA32_SIGCONTEXT_dx+4) + do_expr(3, IA32_SIGCONTEXT_bx+4) + do_expr(5, IA32_SIGCONTEXT_bp+4) + do_expr(6, IA32_SIGCONTEXT_si+4) + do_expr(7, IA32_SIGCONTEXT_di+4) + do_expr(8, IA32_SIGCONTEXT_ip+4) + + .byte 0x42 /* DW_CFA_advance_loc 2 -- nop; popl eax. */ + + do_cfa_expr(IA32_SIGCONTEXT_sp) + do_expr(0, IA32_SIGCONTEXT_ax) + do_expr(1, IA32_SIGCONTEXT_cx) + do_expr(2, IA32_SIGCONTEXT_dx) + do_expr(3, IA32_SIGCONTEXT_bx) + do_expr(5, IA32_SIGCONTEXT_bp) + do_expr(6, IA32_SIGCONTEXT_si) + do_expr(7, IA32_SIGCONTEXT_di) + do_expr(8, IA32_SIGCONTEXT_ip) + + .align 4 +.LENDFDEDLSI1: + + .long .LENDFDEDLSI2-.LSTARTFDEDLSI2 /* Length FDE */ +.LSTARTFDEDLSI2: + .long .LSTARTFDEDLSI2-.LSTARTFRAMEDLSI1 /* CIE pointer */ + /* HACK: See above wrt unwind library assumptions. */ + .long .LSTART_rt_sigreturn-1-. /* PC-relative start address */ + .long .LEND_rt_sigreturn-.LSTART_rt_sigreturn+1 + .uleb128 0 /* Augmentation */ + /* What follows are the instructions for the table generation. + We record the locations of each register saved. This is + slightly less complicated than the above, since we don't + modify the stack pointer in the process. */ + + do_cfa_expr(IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_sp) + do_expr(0, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_ax) + do_expr(1, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_cx) + do_expr(2, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_dx) + do_expr(3, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_bx) + do_expr(5, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_bp) + do_expr(6, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_si) + do_expr(7, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_di) + do_expr(8, IA32_RT_SIGFRAME_sigcontext-4 + IA32_SIGCONTEXT_ip) + + .align 4 +.LENDFDEDLSI2: + .previous diff --git a/arch/x86/entry/vdso/vdso32/system_call.S b/arch/x86/entry/vdso/vdso32/system_call.S new file mode 100644 index 000000000..c92a8fef2 --- /dev/null +++ b/arch/x86/entry/vdso/vdso32/system_call.S @@ -0,0 +1,85 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * AT_SYSINFO entry point +*/ + +#include <linux/linkage.h> +#include <asm/dwarf2.h> +#include <asm/cpufeatures.h> +#include <asm/alternative.h> + + .text + .globl __kernel_vsyscall + .type __kernel_vsyscall,@function + ALIGN +__kernel_vsyscall: + CFI_STARTPROC + /* + * Reshuffle regs so that all of any of the entry instructions + * will preserve enough state. + * + * A really nice entry sequence would be: + * pushl %edx + * pushl %ecx + * movl %esp, %ecx + * + * Unfortunately, naughty Android versions between July and December + * 2015 actually hardcode the traditional Linux SYSENTER entry + * sequence. That is severely broken for a number of reasons (ask + * anyone with an AMD CPU, for example). Nonetheless, we try to keep + * it working approximately as well as it ever worked. + * + * This link may eludicate some of the history: + * https://android-review.googlesource.com/#/q/Iac3295376d61ef83e713ac9b528f3b50aa780cd7 + * personally, I find it hard to understand what's going on there. + * + * Note to future user developers: DO NOT USE SYSENTER IN YOUR CODE. + * Execute an indirect call to the address in the AT_SYSINFO auxv + * entry. That is the ONLY correct way to make a fast 32-bit system + * call on Linux. (Open-coding int $0x80 is also fine, but it's + * slow.) + */ + pushl %ecx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ecx, 0 + pushl %edx + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET edx, 0 + pushl %ebp + CFI_ADJUST_CFA_OFFSET 4 + CFI_REL_OFFSET ebp, 0 + + #define SYSENTER_SEQUENCE "movl %esp, %ebp; sysenter" + #define SYSCALL_SEQUENCE "movl %ecx, %ebp; syscall" + +#ifdef CONFIG_X86_64 + /* If SYSENTER (Intel) or SYSCALL32 (AMD) is available, use it. */ + ALTERNATIVE_2 "", SYSENTER_SEQUENCE, X86_FEATURE_SYSENTER32, \ + SYSCALL_SEQUENCE, X86_FEATURE_SYSCALL32 +#else + ALTERNATIVE "", SYSENTER_SEQUENCE, X86_FEATURE_SEP +#endif + + /* Enter using int $0x80 */ + int $0x80 +SYM_INNER_LABEL(int80_landing_pad, SYM_L_GLOBAL) + + /* + * Restore EDX and ECX in case they were clobbered. EBP is not + * clobbered (the kernel restores it), but it's cleaner and + * probably faster to pop it than to adjust ESP using addl. + */ + popl %ebp + CFI_RESTORE ebp + CFI_ADJUST_CFA_OFFSET -4 + popl %edx + CFI_RESTORE edx + CFI_ADJUST_CFA_OFFSET -4 + popl %ecx + CFI_RESTORE ecx + CFI_ADJUST_CFA_OFFSET -4 + RET + CFI_ENDPROC + + .size __kernel_vsyscall,.-__kernel_vsyscall + .previous diff --git a/arch/x86/entry/vdso/vdso32/vclock_gettime.c b/arch/x86/entry/vdso/vdso32/vclock_gettime.c new file mode 100644 index 000000000..283ed9d00 --- /dev/null +++ b/arch/x86/entry/vdso/vdso32/vclock_gettime.c @@ -0,0 +1,29 @@ +// SPDX-License-Identifier: GPL-2.0 +#define BUILD_VDSO32 + +#ifdef CONFIG_X86_64 + +/* + * in case of a 32 bit VDSO for a 64 bit kernel fake a 32 bit kernel + * configuration + */ +#undef CONFIG_64BIT +#undef CONFIG_X86_64 +#undef CONFIG_COMPAT +#undef CONFIG_PGTABLE_LEVELS +#undef CONFIG_ILLEGAL_POINTER_VALUE +#undef CONFIG_SPARSEMEM_VMEMMAP +#undef CONFIG_NR_CPUS +#undef CONFIG_PARAVIRT_XXL + +#define CONFIG_X86_32 1 +#define CONFIG_PGTABLE_LEVELS 2 +#define CONFIG_PAGE_OFFSET 0 +#define CONFIG_ILLEGAL_POINTER_VALUE 0 +#define CONFIG_NR_CPUS 1 + +#define BUILD_VDSO32_64 + +#endif + +#include "../vclock_gettime.c" diff --git a/arch/x86/entry/vdso/vdso32/vdso32.lds.S b/arch/x86/entry/vdso/vdso32/vdso32.lds.S new file mode 100644 index 000000000..c7720995a --- /dev/null +++ b/arch/x86/entry/vdso/vdso32/vdso32.lds.S @@ -0,0 +1,40 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Linker script for 32-bit vDSO. + * We #include the file to define the layout details. + * + * This file defines the version script giving the user-exported symbols in + * the DSO. + */ + +#include <asm/page.h> + +#define BUILD_VDSO32 + +#include "../vdso-layout.lds.S" + +/* The ELF entry point can be used to set the AT_SYSINFO value. */ +ENTRY(__kernel_vsyscall); + +/* + * This controls what userland symbols we export from the vDSO. + */ +VERSION +{ + LINUX_2.6 { + global: + __vdso_clock_gettime; + __vdso_gettimeofday; + __vdso_time; + __vdso_clock_getres; + __vdso_clock_gettime64; + }; + + LINUX_2.5 { + global: + __kernel_vsyscall; + __kernel_sigreturn; + __kernel_rt_sigreturn; + local: *; + }; +} |