diff options
Diffstat (limited to 'arch/x86/include/uapi/asm/bootparam.h')
| -rw-r--r-- | arch/x86/include/uapi/asm/bootparam.h | 273 |
1 files changed, 273 insertions, 0 deletions
diff --git a/arch/x86/include/uapi/asm/bootparam.h b/arch/x86/include/uapi/asm/bootparam.h new file mode 100644 index 000000000..600a141c8 --- /dev/null +++ b/arch/x86/include/uapi/asm/bootparam.h @@ -0,0 +1,273 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _ASM_X86_BOOTPARAM_H +#define _ASM_X86_BOOTPARAM_H + +/* setup_data/setup_indirect types */ +#define SETUP_NONE 0 +#define SETUP_E820_EXT 1 +#define SETUP_DTB 2 +#define SETUP_PCI 3 +#define SETUP_EFI 4 +#define SETUP_APPLE_PROPERTIES 5 +#define SETUP_JAILHOUSE 6 + +#define SETUP_INDIRECT (1<<31) + +/* SETUP_INDIRECT | max(SETUP_*) */ +#define SETUP_TYPE_MAX (SETUP_INDIRECT | SETUP_JAILHOUSE) + +/* ram_size flags */ +#define RAMDISK_IMAGE_START_MASK 0x07FF +#define RAMDISK_PROMPT_FLAG 0x8000 +#define RAMDISK_LOAD_FLAG 0x4000 + +/* loadflags */ +#define LOADED_HIGH (1<<0) +#define KASLR_FLAG (1<<1) +#define QUIET_FLAG (1<<5) +#define KEEP_SEGMENTS (1<<6) +#define CAN_USE_HEAP (1<<7) + +/* xloadflags */ +#define XLF_KERNEL_64 (1<<0) +#define XLF_CAN_BE_LOADED_ABOVE_4G (1<<1) +#define XLF_EFI_HANDOVER_32 (1<<2) +#define XLF_EFI_HANDOVER_64 (1<<3) +#define XLF_EFI_KEXEC (1<<4) +#define XLF_5LEVEL (1<<5) +#define XLF_5LEVEL_ENABLED (1<<6) + +#ifndef __ASSEMBLY__ + +#include <linux/types.h> +#include <linux/screen_info.h> +#include <linux/apm_bios.h> +#include <linux/edd.h> +#include <asm/ist.h> +#include <video/edid.h> + +/* extensible setup data list node */ +struct setup_data { + __u64 next; + __u32 type; + __u32 len; + __u8 data[0]; +}; + +/* extensible setup indirect data node */ +struct setup_indirect { + __u32 type; + __u32 reserved; /* Reserved, must be set to zero. */ + __u64 len; + __u64 addr; +}; + +struct setup_header { + __u8 setup_sects; + __u16 root_flags; + __u32 syssize; + __u16 ram_size; + __u16 vid_mode; + __u16 root_dev; + __u16 boot_flag; + __u16 jump; + __u32 header; + __u16 version; + __u32 realmode_swtch; + __u16 start_sys_seg; + __u16 kernel_version; + __u8 type_of_loader; + __u8 loadflags; + __u16 setup_move_size; + __u32 code32_start; + __u32 ramdisk_image; + __u32 ramdisk_size; + __u32 bootsect_kludge; + __u16 heap_end_ptr; + __u8 ext_loader_ver; + __u8 ext_loader_type; + __u32 cmd_line_ptr; + __u32 initrd_addr_max; + __u32 kernel_alignment; + __u8 relocatable_kernel; + __u8 min_alignment; + __u16 xloadflags; + __u32 cmdline_size; + __u32 hardware_subarch; + __u64 hardware_subarch_data; + __u32 payload_offset; + __u32 payload_length; + __u64 setup_data; + __u64 pref_address; + __u32 init_size; + __u32 handover_offset; + __u32 kernel_info_offset; +} __attribute__((packed)); + +struct sys_desc_table { + __u16 length; + __u8 table[14]; +}; + +/* Gleaned from OFW's set-parameters in cpu/x86/pc/linux.fth */ +struct olpc_ofw_header { + __u32 ofw_magic; /* OFW signature */ + __u32 ofw_version; + __u32 cif_handler; /* callback into OFW */ + __u32 irq_desc_table; +} __attribute__((packed)); + +struct efi_info { + __u32 efi_loader_signature; + __u32 efi_systab; + __u32 efi_memdesc_size; + __u32 efi_memdesc_version; + __u32 efi_memmap; + __u32 efi_memmap_size; + __u32 efi_systab_hi; + __u32 efi_memmap_hi; +}; + +/* + * This is the maximum number of entries in struct boot_params::e820_table + * (the zeropage), which is part of the x86 boot protocol ABI: + */ +#define E820_MAX_ENTRIES_ZEROPAGE 128 + +/* + * The E820 memory region entry of the boot protocol ABI: + */ +struct boot_e820_entry { + __u64 addr; + __u64 size; + __u32 type; +} __attribute__((packed)); + +/* + * Smallest compatible version of jailhouse_setup_data required by this kernel. + */ +#define JAILHOUSE_SETUP_REQUIRED_VERSION 1 + +/* + * The boot loader is passing platform information via this Jailhouse-specific + * setup data structure. + */ +struct jailhouse_setup_data { + struct { + __u16 version; + __u16 compatible_version; + } __attribute__((packed)) hdr; + struct { + __u16 pm_timer_address; + __u16 num_cpus; + __u64 pci_mmconfig_base; + __u32 tsc_khz; + __u32 apic_khz; + __u8 standard_ioapic; + __u8 cpu_ids[255]; + } __attribute__((packed)) v1; + struct { + __u32 flags; + } __attribute__((packed)) v2; +} __attribute__((packed)); + +/* The so-called "zeropage" */ +struct boot_params { + struct screen_info screen_info; /* 0x000 */ + struct apm_bios_info apm_bios_info; /* 0x040 */ + __u8 _pad2[4]; /* 0x054 */ + __u64 tboot_addr; /* 0x058 */ + struct ist_info ist_info; /* 0x060 */ + __u64 acpi_rsdp_addr; /* 0x070 */ + __u8 _pad3[8]; /* 0x078 */ + __u8 hd0_info[16]; /* obsolete! */ /* 0x080 */ + __u8 hd1_info[16]; /* obsolete! */ /* 0x090 */ + struct sys_desc_table sys_desc_table; /* obsolete! */ /* 0x0a0 */ + struct olpc_ofw_header olpc_ofw_header; /* 0x0b0 */ + __u32 ext_ramdisk_image; /* 0x0c0 */ + __u32 ext_ramdisk_size; /* 0x0c4 */ + __u32 ext_cmd_line_ptr; /* 0x0c8 */ + __u8 _pad4[116]; /* 0x0cc */ + struct edid_info edid_info; /* 0x140 */ + struct efi_info efi_info; /* 0x1c0 */ + __u32 alt_mem_k; /* 0x1e0 */ + __u32 scratch; /* Scratch field! */ /* 0x1e4 */ + __u8 e820_entries; /* 0x1e8 */ + __u8 eddbuf_entries; /* 0x1e9 */ + __u8 edd_mbr_sig_buf_entries; /* 0x1ea */ + __u8 kbd_status; /* 0x1eb */ + __u8 secure_boot; /* 0x1ec */ + __u8 _pad5[2]; /* 0x1ed */ + /* + * The sentinel is set to a nonzero value (0xff) in header.S. + * + * A bootloader is supposed to only take setup_header and put + * it into a clean boot_params buffer. If it turns out that + * it is clumsy or too generous with the buffer, it most + * probably will pick up the sentinel variable too. The fact + * that this variable then is still 0xff will let kernel + * know that some variables in boot_params are invalid and + * kernel should zero out certain portions of boot_params. + */ + __u8 sentinel; /* 0x1ef */ + __u8 _pad6[1]; /* 0x1f0 */ + struct setup_header hdr; /* setup header */ /* 0x1f1 */ + __u8 _pad7[0x290-0x1f1-sizeof(struct setup_header)]; + __u32 edd_mbr_sig_buffer[EDD_MBR_SIG_MAX]; /* 0x290 */ + struct boot_e820_entry e820_table[E820_MAX_ENTRIES_ZEROPAGE]; /* 0x2d0 */ + __u8 _pad8[48]; /* 0xcd0 */ + struct edd_info eddbuf[EDDMAXNR]; /* 0xd00 */ + __u8 _pad9[276]; /* 0xeec */ +} __attribute__((packed)); + +/** + * enum x86_hardware_subarch - x86 hardware subarchitecture + * + * The x86 hardware_subarch and hardware_subarch_data were added as of the x86 + * boot protocol 2.07 to help distinguish and support custom x86 boot + * sequences. This enum represents accepted values for the x86 + * hardware_subarch. Custom x86 boot sequences (not X86_SUBARCH_PC) do not + * have or simply *cannot* make use of natural stubs like BIOS or EFI, the + * hardware_subarch can be used on the Linux entry path to revector to a + * subarchitecture stub when needed. This subarchitecture stub can be used to + * set up Linux boot parameters or for special care to account for nonstandard + * handling of page tables. + * + * These enums should only ever be used by x86 code, and the code that uses + * it should be well contained and compartamentalized. + * + * KVM and Xen HVM do not have a subarch as these are expected to follow + * standard x86 boot entries. If there is a genuine need for "hypervisor" type + * that should be considered separately in the future. Future guest types + * should seriously consider working with standard x86 boot stubs such as + * the BIOS or EFI boot stubs. + * + * WARNING: this enum is only used for legacy hacks, for platform features that + * are not easily enumerated or discoverable. You should not ever use + * this for new features. + * + * @X86_SUBARCH_PC: Should be used if the hardware is enumerable using standard + * PC mechanisms (PCI, ACPI) and doesn't need a special boot flow. + * @X86_SUBARCH_LGUEST: Used for x86 hypervisor demo, lguest, deprecated + * @X86_SUBARCH_XEN: Used for Xen guest types which follow the PV boot path, + * which start at asm startup_xen() entry point and later jump to the C + * xen_start_kernel() entry point. Both domU and dom0 type of guests are + * currently supportd through this PV boot path. + * @X86_SUBARCH_INTEL_MID: Used for Intel MID (Mobile Internet Device) platform + * systems which do not have the PCI legacy interfaces. + * @X86_SUBARCH_CE4100: Used for Intel CE media processor (CE4100) SoC + * for settop boxes and media devices, the use of a subarch for CE4100 + * is more of a hack... + */ +enum x86_hardware_subarch { + X86_SUBARCH_PC = 0, + X86_SUBARCH_LGUEST, + X86_SUBARCH_XEN, + X86_SUBARCH_INTEL_MID, + X86_SUBARCH_CE4100, + X86_NR_SUBARCHS, +}; + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_X86_BOOTPARAM_H */ |