diff options
Diffstat (limited to 'arch/x86/kernel/process_32.c')
| -rw-r--r-- | arch/x86/kernel/process_32.c | 225 |
1 files changed, 225 insertions, 0 deletions
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c new file mode 100644 index 000000000..3b4c394a1 --- /dev/null +++ b/arch/x86/kernel/process_32.c @@ -0,0 +1,225 @@ +/* + * Copyright (C) 1995 Linus Torvalds + * + * Pentium III FXSR, SSE support + * Gareth Hughes <gareth@valinux.com>, May 2000 + */ + +/* + * This file handles the architecture-dependent parts of process handling.. + */ + +#include <linux/cpu.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/sched/task.h> +#include <linux/sched/task_stack.h> +#include <linux/fs.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/elfcore.h> +#include <linux/smp.h> +#include <linux/stddef.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> +#include <linux/user.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/reboot.h> +#include <linux/mc146818rtc.h> +#include <linux/export.h> +#include <linux/kallsyms.h> +#include <linux/ptrace.h> +#include <linux/personality.h> +#include <linux/percpu.h> +#include <linux/prctl.h> +#include <linux/ftrace.h> +#include <linux/uaccess.h> +#include <linux/io.h> +#include <linux/kdebug.h> +#include <linux/syscalls.h> + +#include <asm/ldt.h> +#include <asm/processor.h> +#include <asm/fpu/internal.h> +#include <asm/desc.h> + +#include <linux/err.h> + +#include <asm/tlbflush.h> +#include <asm/cpu.h> +#include <asm/debugreg.h> +#include <asm/switch_to.h> +#include <asm/vm86.h> +#include <asm/resctrl.h> +#include <asm/proto.h> + +#include "process.h" + +void __show_regs(struct pt_regs *regs, enum show_regs_mode mode, + const char *log_lvl) +{ + unsigned long cr0 = 0L, cr2 = 0L, cr3 = 0L, cr4 = 0L; + unsigned long d0, d1, d2, d3, d6, d7; + unsigned short gs; + + if (user_mode(regs)) + gs = get_user_gs(regs); + else + savesegment(gs, gs); + + show_ip(regs, log_lvl); + + printk("%sEAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n", + log_lvl, regs->ax, regs->bx, regs->cx, regs->dx); + printk("%sESI: %08lx EDI: %08lx EBP: %08lx ESP: %08lx\n", + log_lvl, regs->si, regs->di, regs->bp, regs->sp); + printk("%sDS: %04x ES: %04x FS: %04x GS: %04x SS: %04x EFLAGS: %08lx\n", + log_lvl, (u16)regs->ds, (u16)regs->es, (u16)regs->fs, gs, regs->ss, regs->flags); + + if (mode != SHOW_REGS_ALL) + return; + + cr0 = read_cr0(); + cr2 = read_cr2(); + cr3 = __read_cr3(); + cr4 = __read_cr4(); + printk("%sCR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n", + log_lvl, cr0, cr2, cr3, cr4); + + get_debugreg(d0, 0); + get_debugreg(d1, 1); + get_debugreg(d2, 2); + get_debugreg(d3, 3); + get_debugreg(d6, 6); + get_debugreg(d7, 7); + + /* Only print out debug registers if they are in their non-default state. */ + if ((d0 == 0) && (d1 == 0) && (d2 == 0) && (d3 == 0) && + (d6 == DR6_RESERVED) && (d7 == 0x400)) + return; + + printk("%sDR0: %08lx DR1: %08lx DR2: %08lx DR3: %08lx\n", + log_lvl, d0, d1, d2, d3); + printk("%sDR6: %08lx DR7: %08lx\n", + log_lvl, d6, d7); +} + +void release_thread(struct task_struct *dead_task) +{ + BUG_ON(dead_task->mm); + release_vm86_irqs(dead_task); +} + +void +start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp) +{ + set_user_gs(regs, 0); + regs->fs = 0; + regs->ds = __USER_DS; + regs->es = __USER_DS; + regs->ss = __USER_DS; + regs->cs = __USER_CS; + regs->ip = new_ip; + regs->sp = new_sp; + regs->flags = X86_EFLAGS_IF; +} +EXPORT_SYMBOL_GPL(start_thread); + + +/* + * switch_to(x,y) should switch tasks from x to y. + * + * We fsave/fwait so that an exception goes off at the right time + * (as a call from the fsave or fwait in effect) rather than to + * the wrong process. Lazy FP saving no longer makes any sense + * with modern CPU's, and this simplifies a lot of things (SMP + * and UP become the same). + * + * NOTE! We used to use the x86 hardware context switching. The + * reason for not using it any more becomes apparent when you + * try to recover gracefully from saved state that is no longer + * valid (stale segment register values in particular). With the + * hardware task-switch, there is no way to fix up bad state in + * a reasonable manner. + * + * The fact that Intel documents the hardware task-switching to + * be slow is a fairly red herring - this code is not noticeably + * faster. However, there _is_ some room for improvement here, + * so the performance issues may eventually be a valid point. + * More important, however, is the fact that this allows us much + * more flexibility. + * + * The return value (in %ax) will be the "prev" task after + * the task-switch, and shows up in ret_from_fork in entry.S, + * for example. + */ +__visible __notrace_funcgraph struct task_struct * +__switch_to(struct task_struct *prev_p, struct task_struct *next_p) +{ + struct thread_struct *prev = &prev_p->thread, + *next = &next_p->thread; + int cpu = smp_processor_id(); + + /* never put a printk in __switch_to... printk() calls wake_up*() indirectly */ + + if (!test_thread_flag(TIF_NEED_FPU_LOAD)) + switch_fpu_prepare(prev_p, cpu); + + /* + * Save away %gs. No need to save %fs, as it was saved on the + * stack on entry. No need to save %es and %ds, as those are + * always kernel segments while inside the kernel. Doing this + * before setting the new TLS descriptors avoids the situation + * where we temporarily have non-reloadable segments in %fs + * and %gs. This could be an issue if the NMI handler ever + * used %fs or %gs (it does not today), or if the kernel is + * running inside of a hypervisor layer. + */ + lazy_save_gs(prev->gs); + + /* + * Load the per-thread Thread-Local Storage descriptor. + */ + load_TLS(next, cpu); + + switch_to_extra(prev_p, next_p); + + /* + * Leave lazy mode, flushing any hypercalls made here. + * This must be done before restoring TLS segments so + * the GDT and LDT are properly updated. + */ + arch_end_context_switch(next_p); + + /* + * Reload esp0 and cpu_current_top_of_stack. This changes + * current_thread_info(). Refresh the SYSENTER configuration in + * case prev or next is vm86. + */ + update_task_stack(next_p); + refresh_sysenter_cs(next); + this_cpu_write(cpu_current_top_of_stack, + (unsigned long)task_stack_page(next_p) + + THREAD_SIZE); + + /* + * Restore %gs if needed (which is common) + */ + if (prev->gs | next->gs) + lazy_load_gs(next->gs); + + this_cpu_write(current_task, next_p); + + switch_fpu_finish(next_p); + + /* Load the Intel cache allocation PQR MSR. */ + resctrl_sched_in(next_p); + + return prev_p; +} + +SYSCALL_DEFINE2(arch_prctl, int, option, unsigned long, arg2) +{ + return do_arch_prctl_common(current, option, arg2); +} |