diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/x86/kernel/relocate_kernel_64.S | 306 |
1 files changed, 306 insertions, 0 deletions
diff --git a/arch/x86/kernel/relocate_kernel_64.S b/arch/x86/kernel/relocate_kernel_64.S new file mode 100644 index 000000000..d2b7d212c --- /dev/null +++ b/arch/x86/kernel/relocate_kernel_64.S @@ -0,0 +1,306 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * relocate_kernel.S - put the kernel image in place to boot + * Copyright (C) 2002-2005 Eric Biederman <ebiederm@xmission.com> + */ + +#include <linux/linkage.h> +#include <asm/page_types.h> +#include <asm/kexec.h> +#include <asm/processor-flags.h> +#include <asm/pgtable_types.h> +#include <asm/nospec-branch.h> +#include <asm/unwind_hints.h> + +/* + * Must be relocatable PIC code callable as a C function, in particular + * there must be a plain RET and not jump to return thunk. + */ + +#define PTR(x) (x << 3) +#define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY) + +/* + * control_page + KEXEC_CONTROL_CODE_MAX_SIZE + * ~ control_page + PAGE_SIZE are used as data storage and stack for + * jumping back + */ +#define DATA(offset) (KEXEC_CONTROL_CODE_MAX_SIZE+(offset)) + +/* Minimal CPU state */ +#define RSP DATA(0x0) +#define CR0 DATA(0x8) +#define CR3 DATA(0x10) +#define CR4 DATA(0x18) + +/* other data */ +#define CP_PA_TABLE_PAGE DATA(0x20) +#define CP_PA_SWAP_PAGE DATA(0x28) +#define CP_PA_BACKUP_PAGES_MAP DATA(0x30) + + .text + .align PAGE_SIZE + .code64 +SYM_CODE_START_NOALIGN(relocate_kernel) + UNWIND_HINT_EMPTY + /* + * %rdi indirection_page + * %rsi page_list + * %rdx start address + * %rcx preserve_context + * %r8 sme_active + */ + + /* Save the CPU context, used for jumping back */ + pushq %rbx + pushq %rbp + pushq %r12 + pushq %r13 + pushq %r14 + pushq %r15 + pushf + + movq PTR(VA_CONTROL_PAGE)(%rsi), %r11 + movq %rsp, RSP(%r11) + movq %cr0, %rax + movq %rax, CR0(%r11) + movq %cr3, %rax + movq %rax, CR3(%r11) + movq %cr4, %rax + movq %rax, CR4(%r11) + + /* Save CR4. Required to enable the right paging mode later. */ + movq %rax, %r13 + + /* zero out flags, and disable interrupts */ + pushq $0 + popfq + + /* Save SME active flag */ + movq %r8, %r12 + + /* + * get physical address of control page now + * this is impossible after page table switch + */ + movq PTR(PA_CONTROL_PAGE)(%rsi), %r8 + + /* get physical address of page table now too */ + movq PTR(PA_TABLE_PAGE)(%rsi), %r9 + + /* get physical address of swap page now */ + movq PTR(PA_SWAP_PAGE)(%rsi), %r10 + + /* save some information for jumping back */ + movq %r9, CP_PA_TABLE_PAGE(%r11) + movq %r10, CP_PA_SWAP_PAGE(%r11) + movq %rdi, CP_PA_BACKUP_PAGES_MAP(%r11) + + /* Switch to the identity mapped page tables */ + movq %r9, %cr3 + + /* setup a new stack at the end of the physical control page */ + lea PAGE_SIZE(%r8), %rsp + + /* jump to identity mapped page */ + addq $(identity_mapped - relocate_kernel), %r8 + pushq %r8 + ANNOTATE_UNRET_SAFE + ret + int3 +SYM_CODE_END(relocate_kernel) + +SYM_CODE_START_LOCAL_NOALIGN(identity_mapped) + UNWIND_HINT_EMPTY + /* set return address to 0 if not preserving context */ + pushq $0 + /* store the start address on the stack */ + pushq %rdx + + /* + * Set cr0 to a known state: + * - Paging enabled + * - Alignment check disabled + * - Write protect disabled + * - No task switch + * - Don't do FP software emulation. + * - Proctected mode enabled + */ + movq %cr0, %rax + andq $~(X86_CR0_AM | X86_CR0_WP | X86_CR0_TS | X86_CR0_EM), %rax + orl $(X86_CR0_PG | X86_CR0_PE), %eax + movq %rax, %cr0 + + /* + * Set cr4 to a known state: + * - physical address extension enabled + * - 5-level paging, if it was enabled before + */ + movl $X86_CR4_PAE, %eax + testq $X86_CR4_LA57, %r13 + jz 1f + orl $X86_CR4_LA57, %eax +1: + movq %rax, %cr4 + + jmp 1f +1: + + /* Flush the TLB (needed?) */ + movq %r9, %cr3 + + /* + * If SME is active, there could be old encrypted cache line + * entries that will conflict with the now unencrypted memory + * used by kexec. Flush the caches before copying the kernel. + */ + testq %r12, %r12 + jz 1f + wbinvd +1: + + movq %rcx, %r11 + call swap_pages + + /* + * To be certain of avoiding problems with self-modifying code + * I need to execute a serializing instruction here. + * So I flush the TLB by reloading %cr3 here, it's handy, + * and not processor dependent. + */ + movq %cr3, %rax + movq %rax, %cr3 + + /* + * set all of the registers to known values + * leave %rsp alone + */ + + testq %r11, %r11 + jnz 1f + xorl %eax, %eax + xorl %ebx, %ebx + xorl %ecx, %ecx + xorl %edx, %edx + xorl %esi, %esi + xorl %edi, %edi + xorl %ebp, %ebp + xorl %r8d, %r8d + xorl %r9d, %r9d + xorl %r10d, %r10d + xorl %r11d, %r11d + xorl %r12d, %r12d + xorl %r13d, %r13d + xorl %r14d, %r14d + xorl %r15d, %r15d + + ANNOTATE_UNRET_SAFE + ret + int3 + +1: + popq %rdx + leaq PAGE_SIZE(%r10), %rsp + ANNOTATE_RETPOLINE_SAFE + call *%rdx + + /* get the re-entry point of the peer system */ + movq 0(%rsp), %rbp + leaq relocate_kernel(%rip), %r8 + movq CP_PA_SWAP_PAGE(%r8), %r10 + movq CP_PA_BACKUP_PAGES_MAP(%r8), %rdi + movq CP_PA_TABLE_PAGE(%r8), %rax + movq %rax, %cr3 + lea PAGE_SIZE(%r8), %rsp + call swap_pages + movq $virtual_mapped, %rax + pushq %rax + ANNOTATE_UNRET_SAFE + ret + int3 +SYM_CODE_END(identity_mapped) + +SYM_CODE_START_LOCAL_NOALIGN(virtual_mapped) + UNWIND_HINT_EMPTY + movq RSP(%r8), %rsp + movq CR4(%r8), %rax + movq %rax, %cr4 + movq CR3(%r8), %rax + movq CR0(%r8), %r8 + movq %rax, %cr3 + movq %r8, %cr0 + movq %rbp, %rax + + popf + popq %r15 + popq %r14 + popq %r13 + popq %r12 + popq %rbp + popq %rbx + ANNOTATE_UNRET_SAFE + ret + int3 +SYM_CODE_END(virtual_mapped) + + /* Do the copies */ +SYM_CODE_START_LOCAL_NOALIGN(swap_pages) + UNWIND_HINT_EMPTY + movq %rdi, %rcx /* Put the page_list in %rcx */ + xorl %edi, %edi + xorl %esi, %esi + jmp 1f + +0: /* top, read another word for the indirection page */ + + movq (%rbx), %rcx + addq $8, %rbx +1: + testb $0x1, %cl /* is it a destination page? */ + jz 2f + movq %rcx, %rdi + andq $0xfffffffffffff000, %rdi + jmp 0b +2: + testb $0x2, %cl /* is it an indirection page? */ + jz 2f + movq %rcx, %rbx + andq $0xfffffffffffff000, %rbx + jmp 0b +2: + testb $0x4, %cl /* is it the done indicator? */ + jz 2f + jmp 3f +2: + testb $0x8, %cl /* is it the source indicator? */ + jz 0b /* Ignore it otherwise */ + movq %rcx, %rsi /* For ever source page do a copy */ + andq $0xfffffffffffff000, %rsi + + movq %rdi, %rdx + movq %rsi, %rax + + movq %r10, %rdi + movl $512, %ecx + rep ; movsq + + movq %rax, %rdi + movq %rdx, %rsi + movl $512, %ecx + rep ; movsq + + movq %rdx, %rdi + movq %r10, %rsi + movl $512, %ecx + rep ; movsq + + lea PAGE_SIZE(%rax), %rsi + jmp 0b +3: + ANNOTATE_UNRET_SAFE + ret + int3 +SYM_CODE_END(swap_pages) + + .globl kexec_control_code_size +.set kexec_control_code_size, . - relocate_kernel |