diff options
Diffstat (limited to 'arch/x86/kvm/vmx/vmenter.S')
| -rw-r--r-- | arch/x86/kvm/vmx/vmenter.S | 332 |
1 files changed, 332 insertions, 0 deletions
diff --git a/arch/x86/kvm/vmx/vmenter.S b/arch/x86/kvm/vmx/vmenter.S new file mode 100644 index 000000000..982138beb --- /dev/null +++ b/arch/x86/kvm/vmx/vmenter.S @@ -0,0 +1,332 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#include <linux/linkage.h> +#include <asm/asm.h> +#include <asm/bitsperlong.h> +#include <asm/kvm_vcpu_regs.h> +#include <asm/nospec-branch.h> +#include <asm/segment.h> +#include "run_flags.h" + +#define WORD_SIZE (BITS_PER_LONG / 8) + +#define VCPU_RAX __VCPU_REGS_RAX * WORD_SIZE +#define VCPU_RCX __VCPU_REGS_RCX * WORD_SIZE +#define VCPU_RDX __VCPU_REGS_RDX * WORD_SIZE +#define VCPU_RBX __VCPU_REGS_RBX * WORD_SIZE +/* Intentionally omit RSP as it's context switched by hardware */ +#define VCPU_RBP __VCPU_REGS_RBP * WORD_SIZE +#define VCPU_RSI __VCPU_REGS_RSI * WORD_SIZE +#define VCPU_RDI __VCPU_REGS_RDI * WORD_SIZE + +#ifdef CONFIG_X86_64 +#define VCPU_R8 __VCPU_REGS_R8 * WORD_SIZE +#define VCPU_R9 __VCPU_REGS_R9 * WORD_SIZE +#define VCPU_R10 __VCPU_REGS_R10 * WORD_SIZE +#define VCPU_R11 __VCPU_REGS_R11 * WORD_SIZE +#define VCPU_R12 __VCPU_REGS_R12 * WORD_SIZE +#define VCPU_R13 __VCPU_REGS_R13 * WORD_SIZE +#define VCPU_R14 __VCPU_REGS_R14 * WORD_SIZE +#define VCPU_R15 __VCPU_REGS_R15 * WORD_SIZE +#endif + +.section .noinstr.text, "ax" + +/** + * __vmx_vcpu_run - Run a vCPU via a transition to VMX guest mode + * @vmx: struct vcpu_vmx * + * @regs: unsigned long * (to guest registers) + * @flags: VMX_RUN_VMRESUME: use VMRESUME instead of VMLAUNCH + * VMX_RUN_SAVE_SPEC_CTRL: save guest SPEC_CTRL into vmx->spec_ctrl + * + * Returns: + * 0 on VM-Exit, 1 on VM-Fail + */ +SYM_FUNC_START(__vmx_vcpu_run) + push %_ASM_BP + mov %_ASM_SP, %_ASM_BP +#ifdef CONFIG_X86_64 + push %r15 + push %r14 + push %r13 + push %r12 +#else + push %edi + push %esi +#endif + push %_ASM_BX + + /* Save @vmx for SPEC_CTRL handling */ + push %_ASM_ARG1 + + /* Save @flags for SPEC_CTRL handling */ + push %_ASM_ARG3 + + /* + * Save @regs, _ASM_ARG2 may be modified by vmx_update_host_rsp() and + * @regs is needed after VM-Exit to save the guest's register values. + */ + push %_ASM_ARG2 + + /* Copy @flags to BL, _ASM_ARG3 is volatile. */ + mov %_ASM_ARG3B, %bl + + lea (%_ASM_SP), %_ASM_ARG2 + call vmx_update_host_rsp + + /* Load @regs to RAX. */ + mov (%_ASM_SP), %_ASM_AX + + /* Check if vmlaunch or vmresume is needed */ + testb $VMX_RUN_VMRESUME, %bl + + /* Load guest registers. Don't clobber flags. */ + mov VCPU_RCX(%_ASM_AX), %_ASM_CX + mov VCPU_RDX(%_ASM_AX), %_ASM_DX + mov VCPU_RBX(%_ASM_AX), %_ASM_BX + mov VCPU_RBP(%_ASM_AX), %_ASM_BP + mov VCPU_RSI(%_ASM_AX), %_ASM_SI + mov VCPU_RDI(%_ASM_AX), %_ASM_DI +#ifdef CONFIG_X86_64 + mov VCPU_R8 (%_ASM_AX), %r8 + mov VCPU_R9 (%_ASM_AX), %r9 + mov VCPU_R10(%_ASM_AX), %r10 + mov VCPU_R11(%_ASM_AX), %r11 + mov VCPU_R12(%_ASM_AX), %r12 + mov VCPU_R13(%_ASM_AX), %r13 + mov VCPU_R14(%_ASM_AX), %r14 + mov VCPU_R15(%_ASM_AX), %r15 +#endif + /* Load guest RAX. This kills the @regs pointer! */ + mov VCPU_RAX(%_ASM_AX), %_ASM_AX + + /* Check EFLAGS.ZF from 'testb' above */ + jz .Lvmlaunch + + /* + * After a successful VMRESUME/VMLAUNCH, control flow "magically" + * resumes below at 'vmx_vmexit' due to the VMCS HOST_RIP setting. + * So this isn't a typical function and objtool needs to be told to + * save the unwind state here and restore it below. + */ + UNWIND_HINT_SAVE + +/* + * If VMRESUME/VMLAUNCH and corresponding vmexit succeed, execution resumes at + * the 'vmx_vmexit' label below. + */ +.Lvmresume: + vmresume + jmp .Lvmfail + +.Lvmlaunch: + vmlaunch + jmp .Lvmfail + + _ASM_EXTABLE(.Lvmresume, .Lfixup) + _ASM_EXTABLE(.Lvmlaunch, .Lfixup) + +SYM_INNER_LABEL(vmx_vmexit, SYM_L_GLOBAL) + + /* Restore unwind state from before the VMRESUME/VMLAUNCH. */ + UNWIND_HINT_RESTORE + + /* Temporarily save guest's RAX. */ + push %_ASM_AX + + /* Reload @regs to RAX. */ + mov WORD_SIZE(%_ASM_SP), %_ASM_AX + + /* Save all guest registers, including RAX from the stack */ + pop VCPU_RAX(%_ASM_AX) + mov %_ASM_CX, VCPU_RCX(%_ASM_AX) + mov %_ASM_DX, VCPU_RDX(%_ASM_AX) + mov %_ASM_BX, VCPU_RBX(%_ASM_AX) + mov %_ASM_BP, VCPU_RBP(%_ASM_AX) + mov %_ASM_SI, VCPU_RSI(%_ASM_AX) + mov %_ASM_DI, VCPU_RDI(%_ASM_AX) +#ifdef CONFIG_X86_64 + mov %r8, VCPU_R8 (%_ASM_AX) + mov %r9, VCPU_R9 (%_ASM_AX) + mov %r10, VCPU_R10(%_ASM_AX) + mov %r11, VCPU_R11(%_ASM_AX) + mov %r12, VCPU_R12(%_ASM_AX) + mov %r13, VCPU_R13(%_ASM_AX) + mov %r14, VCPU_R14(%_ASM_AX) + mov %r15, VCPU_R15(%_ASM_AX) +#endif + + /* Clear return value to indicate VM-Exit (as opposed to VM-Fail). */ + xor %ebx, %ebx + +.Lclear_regs: + /* + * Clear all general purpose registers except RSP and RBX to prevent + * speculative use of the guest's values, even those that are reloaded + * via the stack. In theory, an L1 cache miss when restoring registers + * could lead to speculative execution with the guest's values. + * Zeroing XORs are dirt cheap, i.e. the extra paranoia is essentially + * free. RSP and RAX are exempt as RSP is restored by hardware during + * VM-Exit and RBX is explicitly loaded with 0 or 1 to hold the return + * value. + */ + xor %eax, %eax + xor %ecx, %ecx + xor %edx, %edx + xor %ebp, %ebp + xor %esi, %esi + xor %edi, %edi +#ifdef CONFIG_X86_64 + xor %r8d, %r8d + xor %r9d, %r9d + xor %r10d, %r10d + xor %r11d, %r11d + xor %r12d, %r12d + xor %r13d, %r13d + xor %r14d, %r14d + xor %r15d, %r15d +#endif + + /* "POP" @regs. */ + add $WORD_SIZE, %_ASM_SP + + /* + * IMPORTANT: RSB filling and SPEC_CTRL handling must be done before + * the first unbalanced RET after vmexit! + * + * For retpoline or IBRS, RSB filling is needed to prevent poisoned RSB + * entries and (in some cases) RSB underflow. + * + * eIBRS has its own protection against poisoned RSB, so it doesn't + * need the RSB filling sequence. But it does need to be enabled, and a + * single call to retire, before the first unbalanced RET. + */ + + FILL_RETURN_BUFFER %_ASM_CX, RSB_CLEAR_LOOPS, X86_FEATURE_RSB_VMEXIT,\ + X86_FEATURE_RSB_VMEXIT_LITE + + + pop %_ASM_ARG2 /* @flags */ + pop %_ASM_ARG1 /* @vmx */ + + call vmx_spec_ctrl_restore_host + + /* Put return value in AX */ + mov %_ASM_BX, %_ASM_AX + + pop %_ASM_BX +#ifdef CONFIG_X86_64 + pop %r12 + pop %r13 + pop %r14 + pop %r15 +#else + pop %esi + pop %edi +#endif + pop %_ASM_BP + RET + +.Lfixup: + cmpb $0, kvm_rebooting + jne .Lvmfail + ud2 +.Lvmfail: + /* VM-Fail: set return value to 1 */ + mov $1, %_ASM_BX + jmp .Lclear_regs + +SYM_FUNC_END(__vmx_vcpu_run) + + +.section .text, "ax" + +/** + * vmread_error_trampoline - Trampoline from inline asm to vmread_error() + * @field: VMCS field encoding that failed + * @fault: %true if the VMREAD faulted, %false if it failed + + * Save and restore volatile registers across a call to vmread_error(). Note, + * all parameters are passed on the stack. + */ +SYM_FUNC_START(vmread_error_trampoline) + push %_ASM_BP + mov %_ASM_SP, %_ASM_BP + + push %_ASM_AX + push %_ASM_CX + push %_ASM_DX +#ifdef CONFIG_X86_64 + push %rdi + push %rsi + push %r8 + push %r9 + push %r10 + push %r11 +#endif +#ifdef CONFIG_X86_64 + /* Load @field and @fault to arg1 and arg2 respectively. */ + mov 3*WORD_SIZE(%rbp), %_ASM_ARG2 + mov 2*WORD_SIZE(%rbp), %_ASM_ARG1 +#else + /* Parameters are passed on the stack for 32-bit (see asmlinkage). */ + push 3*WORD_SIZE(%ebp) + push 2*WORD_SIZE(%ebp) +#endif + + call vmread_error + +#ifndef CONFIG_X86_64 + add $8, %esp +#endif + + /* Zero out @fault, which will be popped into the result register. */ + _ASM_MOV $0, 3*WORD_SIZE(%_ASM_BP) + +#ifdef CONFIG_X86_64 + pop %r11 + pop %r10 + pop %r9 + pop %r8 + pop %rsi + pop %rdi +#endif + pop %_ASM_DX + pop %_ASM_CX + pop %_ASM_AX + pop %_ASM_BP + + RET +SYM_FUNC_END(vmread_error_trampoline) + +SYM_FUNC_START(vmx_do_interrupt_nmi_irqoff) + /* + * Unconditionally create a stack frame, getting the correct RSP on the + * stack (for x86-64) would take two instructions anyways, and RBP can + * be used to restore RSP to make objtool happy (see below). + */ + push %_ASM_BP + mov %_ASM_SP, %_ASM_BP + +#ifdef CONFIG_X86_64 + /* + * Align RSP to a 16-byte boundary (to emulate CPU behavior) before + * creating the synthetic interrupt stack frame for the IRQ/NMI. + */ + and $-16, %rsp + push $__KERNEL_DS + push %rbp +#endif + pushf + push $__KERNEL_CS + CALL_NOSPEC _ASM_ARG1 + + /* + * "Restore" RSP from RBP, even though IRET has already unwound RSP to + * the correct value. objtool doesn't know the callee will IRET and, + * without the explicit restore, thinks the stack is getting walloped. + * Using an unwind hint is problematic due to x86-64's dynamic alignment. + */ + mov %_ASM_BP, %_ASM_SP + pop %_ASM_BP + RET +SYM_FUNC_END(vmx_do_interrupt_nmi_irqoff) |