diff options
Diffstat (limited to 'drivers/ata/pata_cs5536.c')
| -rw-r--r-- | drivers/ata/pata_cs5536.c | 301 |
1 files changed, 301 insertions, 0 deletions
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c new file mode 100644 index 000000000..760ac6e65 --- /dev/null +++ b/drivers/ata/pata_cs5536.c @@ -0,0 +1,301 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * pata_cs5536.c - CS5536 PATA for new ATA layer + * (C) 2007 Martin K. Petersen <mkp@mkp.net> + * (C) 2011 Bartlomiej Zolnierkiewicz + * + * Documentation: + * Available from AMD web site. + * + * The IDE timing registers for the CS5536 live in the Geode Machine + * Specific Register file and not PCI config space. Most BIOSes + * virtualize the PCI registers so the chip looks like a standard IDE + * controller. Unfortunately not all implementations get this right. + * In particular some have problems with unaligned accesses to the + * virtualized PCI registers. This driver always does full dword + * writes to work around the issue. Also, in case of a bad BIOS this + * driver can be loaded with the "msr=1" parameter which forces using + * the Machine Specific Registers to configure the device. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/libata.h> +#include <scsi/scsi_host.h> +#include <linux/dmi.h> + +#ifdef CONFIG_X86_32 +#include <asm/msr.h> +static int use_msr; +module_param_named(msr, use_msr, int, 0644); +MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)"); +#else +#undef rdmsr /* avoid accidental MSR usage on, e.g. x86-64 */ +#undef wrmsr +#define rdmsr(x, y, z) do { } while (0) +#define wrmsr(x, y, z) do { } while (0) +#define use_msr 0 +#endif + +#define DRV_NAME "pata_cs5536" +#define DRV_VERSION "0.0.8" + +enum { + MSR_IDE_CFG = 0x51300010, + PCI_IDE_CFG = 0x40, + + CFG = 0, + DTC = 2, + CAST = 3, + ETC = 4, + + IDE_CFG_CHANEN = (1 << 1), + IDE_CFG_CABLE = (1 << 17) | (1 << 16), + + IDE_D0_SHIFT = 24, + IDE_D1_SHIFT = 16, + IDE_DRV_MASK = 0xff, + + IDE_CAST_D0_SHIFT = 6, + IDE_CAST_D1_SHIFT = 4, + IDE_CAST_DRV_MASK = 0x3, + IDE_CAST_CMD_MASK = 0xff, + IDE_CAST_CMD_SHIFT = 24, + + IDE_ETC_UDMA_MASK = 0xc0, +}; + +/* Some Bachmann OT200 devices have a non working UDMA support due a + * missing resistor. + */ +static const struct dmi_system_id udma_quirk_dmi_table[] = { + { + .ident = "Bachmann electronic OT200", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Bachmann electronic"), + DMI_MATCH(DMI_PRODUCT_NAME, "OT200"), + DMI_MATCH(DMI_PRODUCT_VERSION, "1") + }, + }, + { } +}; + +static int cs5536_read(struct pci_dev *pdev, int reg, u32 *val) +{ + if (unlikely(use_msr)) { + u32 dummy __maybe_unused; + + rdmsr(MSR_IDE_CFG + reg, *val, dummy); + return 0; + } + + return pci_read_config_dword(pdev, PCI_IDE_CFG + reg * 4, val); +} + +static int cs5536_write(struct pci_dev *pdev, int reg, int val) +{ + if (unlikely(use_msr)) { + wrmsr(MSR_IDE_CFG + reg, val, 0); + return 0; + } + + return pci_write_config_dword(pdev, PCI_IDE_CFG + reg * 4, val); +} + +static void cs5536_program_dtc(struct ata_device *adev, u8 tim) +{ + struct pci_dev *pdev = to_pci_dev(adev->link->ap->host->dev); + int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT; + u32 dtc; + + cs5536_read(pdev, DTC, &dtc); + dtc &= ~(IDE_DRV_MASK << dshift); + dtc |= tim << dshift; + cs5536_write(pdev, DTC, dtc); +} + +/** + * cs5536_cable_detect - detect cable type + * @ap: Port to detect on + * + * Perform cable detection for ATA66 capable cable. + * + * Returns a cable type. + */ + +static int cs5536_cable_detect(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 cfg; + + cs5536_read(pdev, CFG, &cfg); + + if (cfg & IDE_CFG_CABLE) + return ATA_CBL_PATA80; + else + return ATA_CBL_PATA40; +} + +/** + * cs5536_set_piomode - PIO setup + * @ap: ATA interface + * @adev: device on the interface + */ + +static void cs5536_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + static const u8 drv_timings[5] = { + 0x98, 0x55, 0x32, 0x21, 0x20, + }; + + static const u8 addr_timings[5] = { + 0x2, 0x1, 0x0, 0x0, 0x0, + }; + + static const u8 cmd_timings[5] = { + 0x99, 0x92, 0x90, 0x22, 0x20, + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + struct ata_device *pair = ata_dev_pair(adev); + int mode = adev->pio_mode - XFER_PIO_0; + int cmdmode = mode; + int cshift = adev->devno ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT; + u32 cast; + + if (pair) + cmdmode = min(mode, pair->pio_mode - XFER_PIO_0); + + cs5536_program_dtc(adev, drv_timings[mode]); + + cs5536_read(pdev, CAST, &cast); + + cast &= ~(IDE_CAST_DRV_MASK << cshift); + cast |= addr_timings[mode] << cshift; + + cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT); + cast |= cmd_timings[cmdmode] << IDE_CAST_CMD_SHIFT; + + cs5536_write(pdev, CAST, cast); +} + +/** + * cs5536_set_dmamode - DMA timing setup + * @ap: ATA interface + * @adev: Device being configured + * + */ + +static void cs5536_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + static const u8 udma_timings[6] = { + 0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6, + }; + + static const u8 mwdma_timings[3] = { + 0x67, 0x21, 0x20, + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 etc; + int mode = adev->dma_mode; + int dshift = adev->devno ? IDE_D1_SHIFT : IDE_D0_SHIFT; + + cs5536_read(pdev, ETC, &etc); + + if (mode >= XFER_UDMA_0) { + etc &= ~(IDE_DRV_MASK << dshift); + etc |= udma_timings[mode - XFER_UDMA_0] << dshift; + } else { /* MWDMA */ + etc &= ~(IDE_ETC_UDMA_MASK << dshift); + cs5536_program_dtc(adev, mwdma_timings[mode - XFER_MW_DMA_0]); + } + + cs5536_write(pdev, ETC, etc); +} + +static struct scsi_host_template cs5536_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations cs5536_port_ops = { + .inherits = &ata_bmdma32_port_ops, + .cable_detect = cs5536_cable_detect, + .set_piomode = cs5536_set_piomode, + .set_dmamode = cs5536_set_dmamode, +}; + +/** + * cs5536_init_one + * @dev: PCI device + * @id: Entry in match table + * + */ + +static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static const struct ata_port_info info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA5, + .port_ops = &cs5536_port_ops, + }; + + static const struct ata_port_info no_udma_info = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .port_ops = &cs5536_port_ops, + }; + + + const struct ata_port_info *ppi[2]; + u32 cfg; + + if (dmi_check_system(udma_quirk_dmi_table)) + ppi[0] = &no_udma_info; + else + ppi[0] = &info; + + ppi[1] = &ata_dummy_port_info; + + if (use_msr) + printk(KERN_ERR DRV_NAME ": Using MSR regs instead of PCI\n"); + + cs5536_read(dev, CFG, &cfg); + + if ((cfg & IDE_CFG_CHANEN) == 0) { + printk(KERN_ERR DRV_NAME ": disabled by BIOS\n"); + return -ENODEV; + } + + return ata_pci_bmdma_init_one(dev, ppi, &cs5536_sht, NULL, 0); +} + +static const struct pci_device_id cs5536[] = { + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_DEV_IDE), }, + { }, +}; + +static struct pci_driver cs5536_pci_driver = { + .name = DRV_NAME, + .id_table = cs5536, + .probe = cs5536_init_one, + .remove = ata_pci_remove_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif +}; + +module_pci_driver(cs5536_pci_driver); + +MODULE_AUTHOR("Martin K. Petersen"); +MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, cs5536); +MODULE_VERSION(DRV_VERSION); |