diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/i2c/busses/i2c-lpc2k.c | 498 |
1 files changed, 498 insertions, 0 deletions
diff --git a/drivers/i2c/busses/i2c-lpc2k.c b/drivers/i2c/busses/i2c-lpc2k.c new file mode 100644 index 000000000..4e30c5267 --- /dev/null +++ b/drivers/i2c/busses/i2c-lpc2k.c @@ -0,0 +1,498 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2011 NXP Semiconductors + * + * Code portions referenced from the i2x-pxa and i2c-pnx drivers + * + * Make SMBus byte and word transactions work on LPC178x/7x + * Copyright (c) 2012 + * Alexander Potashev, Emcraft Systems, aspotashev@emcraft.com + * Anton Protopopov, Emcraft Systems, antonp@emcraft.com + * + * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com> + */ + +#include <linux/clk.h> +#include <linux/errno.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <linux/time.h> + +/* LPC24xx register offsets and bits */ +#define LPC24XX_I2CONSET 0x00 +#define LPC24XX_I2STAT 0x04 +#define LPC24XX_I2DAT 0x08 +#define LPC24XX_I2ADDR 0x0c +#define LPC24XX_I2SCLH 0x10 +#define LPC24XX_I2SCLL 0x14 +#define LPC24XX_I2CONCLR 0x18 + +#define LPC24XX_AA BIT(2) +#define LPC24XX_SI BIT(3) +#define LPC24XX_STO BIT(4) +#define LPC24XX_STA BIT(5) +#define LPC24XX_I2EN BIT(6) + +#define LPC24XX_STO_AA (LPC24XX_STO | LPC24XX_AA) +#define LPC24XX_CLEAR_ALL (LPC24XX_AA | LPC24XX_SI | LPC24XX_STO | \ + LPC24XX_STA | LPC24XX_I2EN) + +/* I2C SCL clock has different duty cycle depending on mode */ +#define I2C_STD_MODE_DUTY 46 +#define I2C_FAST_MODE_DUTY 36 +#define I2C_FAST_MODE_PLUS_DUTY 38 + +/* + * 26 possible I2C status codes, but codes applicable only + * to master are listed here and used in this driver + */ +enum { + M_BUS_ERROR = 0x00, + M_START = 0x08, + M_REPSTART = 0x10, + MX_ADDR_W_ACK = 0x18, + MX_ADDR_W_NACK = 0x20, + MX_DATA_W_ACK = 0x28, + MX_DATA_W_NACK = 0x30, + M_DATA_ARB_LOST = 0x38, + MR_ADDR_R_ACK = 0x40, + MR_ADDR_R_NACK = 0x48, + MR_DATA_R_ACK = 0x50, + MR_DATA_R_NACK = 0x58, + M_I2C_IDLE = 0xf8, +}; + +struct lpc2k_i2c { + void __iomem *base; + struct clk *clk; + int irq; + wait_queue_head_t wait; + struct i2c_adapter adap; + struct i2c_msg *msg; + int msg_idx; + int msg_status; + int is_last; +}; + +static void i2c_lpc2k_reset(struct lpc2k_i2c *i2c) +{ + /* Will force clear all statuses */ + writel(LPC24XX_CLEAR_ALL, i2c->base + LPC24XX_I2CONCLR); + writel(0, i2c->base + LPC24XX_I2ADDR); + writel(LPC24XX_I2EN, i2c->base + LPC24XX_I2CONSET); +} + +static int i2c_lpc2k_clear_arb(struct lpc2k_i2c *i2c) +{ + unsigned long timeout = jiffies + msecs_to_jiffies(1000); + + /* + * If the transfer needs to abort for some reason, we'll try to + * force a stop condition to clear any pending bus conditions + */ + writel(LPC24XX_STO, i2c->base + LPC24XX_I2CONSET); + + /* Wait for status change */ + while (readl(i2c->base + LPC24XX_I2STAT) != M_I2C_IDLE) { + if (time_after(jiffies, timeout)) { + /* Bus was not idle, try to reset adapter */ + i2c_lpc2k_reset(i2c); + return -EBUSY; + } + + cpu_relax(); + } + + return 0; +} + +static void i2c_lpc2k_pump_msg(struct lpc2k_i2c *i2c) +{ + unsigned char data; + u32 status; + + /* + * I2C in the LPC2xxx series is basically a state machine. + * Just run through the steps based on the current status. + */ + status = readl(i2c->base + LPC24XX_I2STAT); + + switch (status) { + case M_START: + case M_REPSTART: + /* Start bit was just sent out, send out addr and dir */ + data = i2c_8bit_addr_from_msg(i2c->msg); + + writel(data, i2c->base + LPC24XX_I2DAT); + writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONCLR); + break; + + case MX_ADDR_W_ACK: + case MX_DATA_W_ACK: + /* + * Address or data was sent out with an ACK. If there is more + * data to send, send it now + */ + if (i2c->msg_idx < i2c->msg->len) { + writel(i2c->msg->buf[i2c->msg_idx], + i2c->base + LPC24XX_I2DAT); + } else if (i2c->is_last) { + /* Last message, send stop */ + writel(LPC24XX_STO_AA, i2c->base + LPC24XX_I2CONSET); + writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR); + i2c->msg_status = 0; + disable_irq_nosync(i2c->irq); + } else { + i2c->msg_status = 0; + disable_irq_nosync(i2c->irq); + } + + i2c->msg_idx++; + break; + + case MR_ADDR_R_ACK: + /* Receive first byte from slave */ + if (i2c->msg->len == 1) { + /* Last byte, return NACK */ + writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONCLR); + } else { + /* Not last byte, return ACK */ + writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONSET); + } + + writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONCLR); + break; + + case MR_DATA_R_NACK: + /* + * The I2C shows NACK status on reads, so we need to accept + * the NACK as an ACK here. This should be ok, as the real + * BACK would of been caught on the address write. + */ + case MR_DATA_R_ACK: + /* Data was received */ + if (i2c->msg_idx < i2c->msg->len) { + i2c->msg->buf[i2c->msg_idx] = + readl(i2c->base + LPC24XX_I2DAT); + } + + /* If transfer is done, send STOP */ + if (i2c->msg_idx >= i2c->msg->len - 1 && i2c->is_last) { + writel(LPC24XX_STO_AA, i2c->base + LPC24XX_I2CONSET); + writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR); + i2c->msg_status = 0; + } + + /* Message is done */ + if (i2c->msg_idx >= i2c->msg->len - 1) { + i2c->msg_status = 0; + disable_irq_nosync(i2c->irq); + } + + /* + * One pre-last data input, send NACK to tell the slave that + * this is going to be the last data byte to be transferred. + */ + if (i2c->msg_idx >= i2c->msg->len - 2) { + /* One byte left to receive - NACK */ + writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONCLR); + } else { + /* More than one byte left to receive - ACK */ + writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONSET); + } + + writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONCLR); + i2c->msg_idx++; + break; + + case MX_ADDR_W_NACK: + case MX_DATA_W_NACK: + case MR_ADDR_R_NACK: + /* NACK processing is done */ + writel(LPC24XX_STO_AA, i2c->base + LPC24XX_I2CONSET); + i2c->msg_status = -ENXIO; + disable_irq_nosync(i2c->irq); + break; + + case M_DATA_ARB_LOST: + /* Arbitration lost */ + i2c->msg_status = -EAGAIN; + + /* Release the I2C bus */ + writel(LPC24XX_STA | LPC24XX_STO, i2c->base + LPC24XX_I2CONCLR); + disable_irq_nosync(i2c->irq); + break; + + default: + /* Unexpected statuses */ + i2c->msg_status = -EIO; + disable_irq_nosync(i2c->irq); + break; + } + + /* Exit on failure or all bytes transferred */ + if (i2c->msg_status != -EBUSY) + wake_up(&i2c->wait); + + /* + * If `msg_status` is zero, then `lpc2k_process_msg()` + * is responsible for clearing the SI flag. + */ + if (i2c->msg_status != 0) + writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR); +} + +static int lpc2k_process_msg(struct lpc2k_i2c *i2c, int msgidx) +{ + /* A new transfer is kicked off by initiating a start condition */ + if (!msgidx) { + writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONSET); + } else { + /* + * A multi-message I2C transfer continues where the + * previous I2C transfer left off and uses the + * current condition of the I2C adapter. + */ + if (unlikely(i2c->msg->flags & I2C_M_NOSTART)) { + WARN_ON(i2c->msg->len == 0); + + if (!(i2c->msg->flags & I2C_M_RD)) { + /* Start transmit of data */ + writel(i2c->msg->buf[0], + i2c->base + LPC24XX_I2DAT); + i2c->msg_idx++; + } + } else { + /* Start or repeated start */ + writel(LPC24XX_STA, i2c->base + LPC24XX_I2CONSET); + } + + writel(LPC24XX_SI, i2c->base + LPC24XX_I2CONCLR); + } + + enable_irq(i2c->irq); + + /* Wait for transfer completion */ + if (wait_event_timeout(i2c->wait, i2c->msg_status != -EBUSY, + msecs_to_jiffies(1000)) == 0) { + disable_irq_nosync(i2c->irq); + + return -ETIMEDOUT; + } + + return i2c->msg_status; +} + +static int i2c_lpc2k_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, + int msg_num) +{ + struct lpc2k_i2c *i2c = i2c_get_adapdata(adap); + int ret, i; + u32 stat; + + /* Check for bus idle condition */ + stat = readl(i2c->base + LPC24XX_I2STAT); + if (stat != M_I2C_IDLE) { + /* Something is holding the bus, try to clear it */ + return i2c_lpc2k_clear_arb(i2c); + } + + /* Process a single message at a time */ + for (i = 0; i < msg_num; i++) { + /* Save message pointer and current message data index */ + i2c->msg = &msgs[i]; + i2c->msg_idx = 0; + i2c->msg_status = -EBUSY; + i2c->is_last = (i == (msg_num - 1)); + + ret = lpc2k_process_msg(i2c, i); + if (ret) + return ret; + } + + return msg_num; +} + +static irqreturn_t i2c_lpc2k_handler(int irq, void *dev_id) +{ + struct lpc2k_i2c *i2c = dev_id; + + if (readl(i2c->base + LPC24XX_I2CONSET) & LPC24XX_SI) { + i2c_lpc2k_pump_msg(i2c); + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +static u32 i2c_lpc2k_functionality(struct i2c_adapter *adap) +{ + /* Only emulated SMBus for now */ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static const struct i2c_algorithm i2c_lpc2k_algorithm = { + .master_xfer = i2c_lpc2k_xfer, + .functionality = i2c_lpc2k_functionality, +}; + +static int i2c_lpc2k_probe(struct platform_device *pdev) +{ + struct lpc2k_i2c *i2c; + u32 bus_clk_rate; + u32 scl_high; + u32 clkrate; + int ret; + + i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL); + if (!i2c) + return -ENOMEM; + + i2c->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(i2c->base)) + return PTR_ERR(i2c->base); + + i2c->irq = platform_get_irq(pdev, 0); + if (i2c->irq < 0) + return i2c->irq; + + init_waitqueue_head(&i2c->wait); + + i2c->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(i2c->clk)) { + dev_err(&pdev->dev, "error getting clock\n"); + return PTR_ERR(i2c->clk); + } + + ret = clk_prepare_enable(i2c->clk); + if (ret) { + dev_err(&pdev->dev, "unable to enable clock.\n"); + return ret; + } + + ret = devm_request_irq(&pdev->dev, i2c->irq, i2c_lpc2k_handler, 0, + dev_name(&pdev->dev), i2c); + if (ret < 0) { + dev_err(&pdev->dev, "can't request interrupt.\n"); + goto fail_clk; + } + + disable_irq_nosync(i2c->irq); + + /* Place controller is a known state */ + i2c_lpc2k_reset(i2c); + + ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency", + &bus_clk_rate); + if (ret) + bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ; + + clkrate = clk_get_rate(i2c->clk); + if (clkrate == 0) { + dev_err(&pdev->dev, "can't get I2C base clock\n"); + ret = -EINVAL; + goto fail_clk; + } + + /* Setup I2C dividers to generate clock with proper duty cycle */ + clkrate = clkrate / bus_clk_rate; + if (bus_clk_rate <= I2C_MAX_STANDARD_MODE_FREQ) + scl_high = (clkrate * I2C_STD_MODE_DUTY) / 100; + else if (bus_clk_rate <= I2C_MAX_FAST_MODE_FREQ) + scl_high = (clkrate * I2C_FAST_MODE_DUTY) / 100; + else + scl_high = (clkrate * I2C_FAST_MODE_PLUS_DUTY) / 100; + + writel(scl_high, i2c->base + LPC24XX_I2SCLH); + writel(clkrate - scl_high, i2c->base + LPC24XX_I2SCLL); + + platform_set_drvdata(pdev, i2c); + + i2c_set_adapdata(&i2c->adap, i2c); + i2c->adap.owner = THIS_MODULE; + strlcpy(i2c->adap.name, "LPC2K I2C adapter", sizeof(i2c->adap.name)); + i2c->adap.algo = &i2c_lpc2k_algorithm; + i2c->adap.dev.parent = &pdev->dev; + i2c->adap.dev.of_node = pdev->dev.of_node; + + ret = i2c_add_adapter(&i2c->adap); + if (ret < 0) + goto fail_clk; + + dev_info(&pdev->dev, "LPC2K I2C adapter\n"); + + return 0; + +fail_clk: + clk_disable_unprepare(i2c->clk); + return ret; +} + +static int i2c_lpc2k_remove(struct platform_device *dev) +{ + struct lpc2k_i2c *i2c = platform_get_drvdata(dev); + + i2c_del_adapter(&i2c->adap); + clk_disable_unprepare(i2c->clk); + + return 0; +} + +#ifdef CONFIG_PM +static int i2c_lpc2k_suspend(struct device *dev) +{ + struct lpc2k_i2c *i2c = dev_get_drvdata(dev); + + clk_disable(i2c->clk); + + return 0; +} + +static int i2c_lpc2k_resume(struct device *dev) +{ + struct lpc2k_i2c *i2c = dev_get_drvdata(dev); + + clk_enable(i2c->clk); + i2c_lpc2k_reset(i2c); + + return 0; +} + +static const struct dev_pm_ops i2c_lpc2k_dev_pm_ops = { + .suspend_noirq = i2c_lpc2k_suspend, + .resume_noirq = i2c_lpc2k_resume, +}; + +#define I2C_LPC2K_DEV_PM_OPS (&i2c_lpc2k_dev_pm_ops) +#else +#define I2C_LPC2K_DEV_PM_OPS NULL +#endif + +static const struct of_device_id lpc2k_i2c_match[] = { + { .compatible = "nxp,lpc1788-i2c" }, + {}, +}; +MODULE_DEVICE_TABLE(of, lpc2k_i2c_match); + +static struct platform_driver i2c_lpc2k_driver = { + .probe = i2c_lpc2k_probe, + .remove = i2c_lpc2k_remove, + .driver = { + .name = "lpc2k-i2c", + .pm = I2C_LPC2K_DEV_PM_OPS, + .of_match_table = lpc2k_i2c_match, + }, +}; +module_platform_driver(i2c_lpc2k_driver); + +MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>"); +MODULE_DESCRIPTION("I2C driver for LPC2xxx devices"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:lpc2k-i2c"); |