diff options
Diffstat (limited to 'drivers/infiniband/hw/hfi1/platform.c')
| -rw-r--r-- | drivers/infiniband/hw/hfi1/platform.c | 1077 |
1 files changed, 1077 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/hfi1/platform.c b/drivers/infiniband/hw/hfi1/platform.c new file mode 100644 index 000000000..4642d6ceb --- /dev/null +++ b/drivers/infiniband/hw/hfi1/platform.c @@ -0,0 +1,1077 @@ +/* + * Copyright(c) 2015, 2016 Intel Corporation. + * + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * BSD LICENSE + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * - Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * - Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#include <linux/firmware.h> + +#include "hfi.h" +#include "efivar.h" +#include "eprom.h" + +#define DEFAULT_PLATFORM_CONFIG_NAME "hfi1_platform.dat" + +static int validate_scratch_checksum(struct hfi1_devdata *dd) +{ + u64 checksum = 0, temp_scratch = 0; + int i, j, version; + + temp_scratch = read_csr(dd, ASIC_CFG_SCRATCH); + version = (temp_scratch & BITMAP_VERSION_SMASK) >> BITMAP_VERSION_SHIFT; + + /* Prevent power on default of all zeroes from passing checksum */ + if (!version) { + dd_dev_err(dd, "%s: Config bitmap uninitialized\n", __func__); + dd_dev_err(dd, + "%s: Please update your BIOS to support active channels\n", + __func__); + return 0; + } + + /* + * ASIC scratch 0 only contains the checksum and bitmap version as + * fields of interest, both of which are handled separately from the + * loop below, so skip it + */ + checksum += version; + for (i = 1; i < ASIC_NUM_SCRATCH; i++) { + temp_scratch = read_csr(dd, ASIC_CFG_SCRATCH + (8 * i)); + for (j = sizeof(u64); j != 0; j -= 2) { + checksum += (temp_scratch & 0xFFFF); + temp_scratch >>= 16; + } + } + + while (checksum >> 16) + checksum = (checksum & CHECKSUM_MASK) + (checksum >> 16); + + temp_scratch = read_csr(dd, ASIC_CFG_SCRATCH); + temp_scratch &= CHECKSUM_SMASK; + temp_scratch >>= CHECKSUM_SHIFT; + + if (checksum + temp_scratch == 0xFFFF) + return 1; + + dd_dev_err(dd, "%s: Configuration bitmap corrupted\n", __func__); + return 0; +} + +static void save_platform_config_fields(struct hfi1_devdata *dd) +{ + struct hfi1_pportdata *ppd = dd->pport; + u64 temp_scratch = 0, temp_dest = 0; + + temp_scratch = read_csr(dd, ASIC_CFG_SCRATCH_1); + + temp_dest = temp_scratch & + (dd->hfi1_id ? PORT1_PORT_TYPE_SMASK : + PORT0_PORT_TYPE_SMASK); + ppd->port_type = temp_dest >> + (dd->hfi1_id ? PORT1_PORT_TYPE_SHIFT : + PORT0_PORT_TYPE_SHIFT); + + temp_dest = temp_scratch & + (dd->hfi1_id ? PORT1_LOCAL_ATTEN_SMASK : + PORT0_LOCAL_ATTEN_SMASK); + ppd->local_atten = temp_dest >> + (dd->hfi1_id ? PORT1_LOCAL_ATTEN_SHIFT : + PORT0_LOCAL_ATTEN_SHIFT); + + temp_dest = temp_scratch & + (dd->hfi1_id ? PORT1_REMOTE_ATTEN_SMASK : + PORT0_REMOTE_ATTEN_SMASK); + ppd->remote_atten = temp_dest >> + (dd->hfi1_id ? PORT1_REMOTE_ATTEN_SHIFT : + PORT0_REMOTE_ATTEN_SHIFT); + + temp_dest = temp_scratch & + (dd->hfi1_id ? PORT1_DEFAULT_ATTEN_SMASK : + PORT0_DEFAULT_ATTEN_SMASK); + ppd->default_atten = temp_dest >> + (dd->hfi1_id ? PORT1_DEFAULT_ATTEN_SHIFT : + PORT0_DEFAULT_ATTEN_SHIFT); + + temp_scratch = read_csr(dd, dd->hfi1_id ? ASIC_CFG_SCRATCH_3 : + ASIC_CFG_SCRATCH_2); + + ppd->tx_preset_eq = (temp_scratch & TX_EQ_SMASK) >> TX_EQ_SHIFT; + ppd->tx_preset_noeq = (temp_scratch & TX_NO_EQ_SMASK) >> TX_NO_EQ_SHIFT; + ppd->rx_preset = (temp_scratch & RX_SMASK) >> RX_SHIFT; + + ppd->max_power_class = (temp_scratch & QSFP_MAX_POWER_SMASK) >> + QSFP_MAX_POWER_SHIFT; + + ppd->config_from_scratch = true; +} + +void get_platform_config(struct hfi1_devdata *dd) +{ + int ret = 0; + u8 *temp_platform_config = NULL; + u32 esize; + const struct firmware *platform_config_file = NULL; + + if (is_integrated(dd)) { + if (validate_scratch_checksum(dd)) { + save_platform_config_fields(dd); + return; + } + } else { + ret = eprom_read_platform_config(dd, + (void **)&temp_platform_config, + &esize); + if (!ret) { + /* success */ + dd->platform_config.data = temp_platform_config; + dd->platform_config.size = esize; + return; + } + } + dd_dev_err(dd, + "%s: Failed to get platform config, falling back to sub-optimal default file\n", + __func__); + + ret = request_firmware(&platform_config_file, + DEFAULT_PLATFORM_CONFIG_NAME, + &dd->pcidev->dev); + if (ret) { + dd_dev_err(dd, + "%s: No default platform config file found\n", + __func__); + return; + } + + /* + * Allocate separate memory block to store data and free firmware + * structure. This allows free_platform_config to treat EPROM and + * fallback configs in the same manner. + */ + dd->platform_config.data = kmemdup(platform_config_file->data, + platform_config_file->size, + GFP_KERNEL); + dd->platform_config.size = platform_config_file->size; + release_firmware(platform_config_file); +} + +void free_platform_config(struct hfi1_devdata *dd) +{ + /* Release memory allocated for eprom or fallback file read. */ + kfree(dd->platform_config.data); + dd->platform_config.data = NULL; +} + +void get_port_type(struct hfi1_pportdata *ppd) +{ + int ret; + u32 temp; + + ret = get_platform_config_field(ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0, + PORT_TABLE_PORT_TYPE, &temp, + 4); + if (ret) { + ppd->port_type = PORT_TYPE_UNKNOWN; + return; + } + ppd->port_type = temp; +} + +int set_qsfp_tx(struct hfi1_pportdata *ppd, int on) +{ + u8 tx_ctrl_byte = on ? 0x0 : 0xF; + int ret = 0; + + ret = qsfp_write(ppd, ppd->dd->hfi1_id, QSFP_TX_CTRL_BYTE_OFFS, + &tx_ctrl_byte, 1); + /* we expected 1, so consider 0 an error */ + if (ret == 0) + ret = -EIO; + else if (ret == 1) + ret = 0; + return ret; +} + +static int qual_power(struct hfi1_pportdata *ppd) +{ + u32 cable_power_class = 0, power_class_max = 0; + u8 *cache = ppd->qsfp_info.cache; + int ret = 0; + + ret = get_platform_config_field( + ppd->dd, PLATFORM_CONFIG_SYSTEM_TABLE, 0, + SYSTEM_TABLE_QSFP_POWER_CLASS_MAX, &power_class_max, 4); + if (ret) + return ret; + + cable_power_class = get_qsfp_power_class(cache[QSFP_MOD_PWR_OFFS]); + + if (cable_power_class > power_class_max) + ppd->offline_disabled_reason = + HFI1_ODR_MASK(OPA_LINKDOWN_REASON_POWER_POLICY); + + if (ppd->offline_disabled_reason == + HFI1_ODR_MASK(OPA_LINKDOWN_REASON_POWER_POLICY)) { + dd_dev_err( + ppd->dd, + "%s: Port disabled due to system power restrictions\n", + __func__); + ret = -EPERM; + } + return ret; +} + +static int qual_bitrate(struct hfi1_pportdata *ppd) +{ + u16 lss = ppd->link_speed_supported, lse = ppd->link_speed_enabled; + u8 *cache = ppd->qsfp_info.cache; + + if ((lss & OPA_LINK_SPEED_25G) && (lse & OPA_LINK_SPEED_25G) && + cache[QSFP_NOM_BIT_RATE_250_OFFS] < 0x64) + ppd->offline_disabled_reason = + HFI1_ODR_MASK(OPA_LINKDOWN_REASON_LINKSPEED_POLICY); + + if ((lss & OPA_LINK_SPEED_12_5G) && (lse & OPA_LINK_SPEED_12_5G) && + cache[QSFP_NOM_BIT_RATE_100_OFFS] < 0x7D) + ppd->offline_disabled_reason = + HFI1_ODR_MASK(OPA_LINKDOWN_REASON_LINKSPEED_POLICY); + + if (ppd->offline_disabled_reason == + HFI1_ODR_MASK(OPA_LINKDOWN_REASON_LINKSPEED_POLICY)) { + dd_dev_err( + ppd->dd, + "%s: Cable failed bitrate check, disabling port\n", + __func__); + return -EPERM; + } + return 0; +} + +static int set_qsfp_high_power(struct hfi1_pportdata *ppd) +{ + u8 cable_power_class = 0, power_ctrl_byte = 0; + u8 *cache = ppd->qsfp_info.cache; + int ret; + + cable_power_class = get_qsfp_power_class(cache[QSFP_MOD_PWR_OFFS]); + + if (cable_power_class > QSFP_POWER_CLASS_1) { + power_ctrl_byte = cache[QSFP_PWR_CTRL_BYTE_OFFS]; + + power_ctrl_byte |= 1; + power_ctrl_byte &= ~(0x2); + + ret = qsfp_write(ppd, ppd->dd->hfi1_id, + QSFP_PWR_CTRL_BYTE_OFFS, + &power_ctrl_byte, 1); + if (ret != 1) + return -EIO; + + if (cable_power_class > QSFP_POWER_CLASS_4) { + power_ctrl_byte |= (1 << 2); + ret = qsfp_write(ppd, ppd->dd->hfi1_id, + QSFP_PWR_CTRL_BYTE_OFFS, + &power_ctrl_byte, 1); + if (ret != 1) + return -EIO; + } + + /* SFF 8679 rev 1.7 LPMode Deassert time */ + msleep(300); + } + return 0; +} + +static void apply_rx_cdr(struct hfi1_pportdata *ppd, + u32 rx_preset_index, + u8 *cdr_ctrl_byte) +{ + u32 rx_preset; + u8 *cache = ppd->qsfp_info.cache; + int cable_power_class; + + if (!((cache[QSFP_MOD_PWR_OFFS] & 0x4) && + (cache[QSFP_CDR_INFO_OFFS] & 0x40))) + return; + + /* RX CDR present, bypass supported */ + cable_power_class = get_qsfp_power_class(cache[QSFP_MOD_PWR_OFFS]); + + if (cable_power_class <= QSFP_POWER_CLASS_3) { + /* Power class <= 3, ignore config & turn RX CDR on */ + *cdr_ctrl_byte |= 0xF; + return; + } + + get_platform_config_field( + ppd->dd, PLATFORM_CONFIG_RX_PRESET_TABLE, + rx_preset_index, RX_PRESET_TABLE_QSFP_RX_CDR_APPLY, + &rx_preset, 4); + + if (!rx_preset) { + dd_dev_info( + ppd->dd, + "%s: RX_CDR_APPLY is set to disabled\n", + __func__); + return; + } + get_platform_config_field( + ppd->dd, PLATFORM_CONFIG_RX_PRESET_TABLE, + rx_preset_index, RX_PRESET_TABLE_QSFP_RX_CDR, + &rx_preset, 4); + + /* Expand cdr setting to all 4 lanes */ + rx_preset = (rx_preset | (rx_preset << 1) | + (rx_preset << 2) | (rx_preset << 3)); + + if (rx_preset) { + *cdr_ctrl_byte |= rx_preset; + } else { + *cdr_ctrl_byte &= rx_preset; + /* Preserve current TX CDR status */ + *cdr_ctrl_byte |= (cache[QSFP_CDR_CTRL_BYTE_OFFS] & 0xF0); + } +} + +static void apply_tx_cdr(struct hfi1_pportdata *ppd, + u32 tx_preset_index, + u8 *cdr_ctrl_byte) +{ + u32 tx_preset; + u8 *cache = ppd->qsfp_info.cache; + int cable_power_class; + + if (!((cache[QSFP_MOD_PWR_OFFS] & 0x8) && + (cache[QSFP_CDR_INFO_OFFS] & 0x80))) + return; + + /* TX CDR present, bypass supported */ + cable_power_class = get_qsfp_power_class(cache[QSFP_MOD_PWR_OFFS]); + + if (cable_power_class <= QSFP_POWER_CLASS_3) { + /* Power class <= 3, ignore config & turn TX CDR on */ + *cdr_ctrl_byte |= 0xF0; + return; + } + + get_platform_config_field( + ppd->dd, + PLATFORM_CONFIG_TX_PRESET_TABLE, tx_preset_index, + TX_PRESET_TABLE_QSFP_TX_CDR_APPLY, &tx_preset, 4); + + if (!tx_preset) { + dd_dev_info( + ppd->dd, + "%s: TX_CDR_APPLY is set to disabled\n", + __func__); + return; + } + get_platform_config_field( + ppd->dd, + PLATFORM_CONFIG_TX_PRESET_TABLE, + tx_preset_index, + TX_PRESET_TABLE_QSFP_TX_CDR, &tx_preset, 4); + + /* Expand cdr setting to all 4 lanes */ + tx_preset = (tx_preset | (tx_preset << 1) | + (tx_preset << 2) | (tx_preset << 3)); + + if (tx_preset) + *cdr_ctrl_byte |= (tx_preset << 4); + else + /* Preserve current/determined RX CDR status */ + *cdr_ctrl_byte &= ((tx_preset << 4) | 0xF); +} + +static void apply_cdr_settings( + struct hfi1_pportdata *ppd, u32 rx_preset_index, + u32 tx_preset_index) +{ + u8 *cache = ppd->qsfp_info.cache; + u8 cdr_ctrl_byte = cache[QSFP_CDR_CTRL_BYTE_OFFS]; + + apply_rx_cdr(ppd, rx_preset_index, &cdr_ctrl_byte); + + apply_tx_cdr(ppd, tx_preset_index, &cdr_ctrl_byte); + + qsfp_write(ppd, ppd->dd->hfi1_id, QSFP_CDR_CTRL_BYTE_OFFS, + &cdr_ctrl_byte, 1); +} + +static void apply_tx_eq_auto(struct hfi1_pportdata *ppd) +{ + u8 *cache = ppd->qsfp_info.cache; + u8 tx_eq; + + if (!(cache[QSFP_EQ_INFO_OFFS] & 0x8)) + return; + /* Disable adaptive TX EQ if present */ + tx_eq = cache[(128 * 3) + 241]; + tx_eq &= 0xF0; + qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 241, &tx_eq, 1); +} + +static void apply_tx_eq_prog(struct hfi1_pportdata *ppd, u32 tx_preset_index) +{ + u8 *cache = ppd->qsfp_info.cache; + u32 tx_preset; + u8 tx_eq; + + if (!(cache[QSFP_EQ_INFO_OFFS] & 0x4)) + return; + + get_platform_config_field( + ppd->dd, PLATFORM_CONFIG_TX_PRESET_TABLE, + tx_preset_index, TX_PRESET_TABLE_QSFP_TX_EQ_APPLY, + &tx_preset, 4); + if (!tx_preset) { + dd_dev_info( + ppd->dd, + "%s: TX_EQ_APPLY is set to disabled\n", + __func__); + return; + } + get_platform_config_field( + ppd->dd, PLATFORM_CONFIG_TX_PRESET_TABLE, + tx_preset_index, TX_PRESET_TABLE_QSFP_TX_EQ, + &tx_preset, 4); + + if (((cache[(128 * 3) + 224] & 0xF0) >> 4) < tx_preset) { + dd_dev_info( + ppd->dd, + "%s: TX EQ %x unsupported\n", + __func__, tx_preset); + + dd_dev_info( + ppd->dd, + "%s: Applying EQ %x\n", + __func__, cache[608] & 0xF0); + + tx_preset = (cache[608] & 0xF0) >> 4; + } + + tx_eq = tx_preset | (tx_preset << 4); + qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 234, &tx_eq, 1); + qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 235, &tx_eq, 1); +} + +static void apply_rx_eq_emp(struct hfi1_pportdata *ppd, u32 rx_preset_index) +{ + u32 rx_preset; + u8 rx_eq, *cache = ppd->qsfp_info.cache; + + if (!(cache[QSFP_EQ_INFO_OFFS] & 0x2)) + return; + get_platform_config_field( + ppd->dd, PLATFORM_CONFIG_RX_PRESET_TABLE, + rx_preset_index, RX_PRESET_TABLE_QSFP_RX_EMP_APPLY, + &rx_preset, 4); + + if (!rx_preset) { + dd_dev_info( + ppd->dd, + "%s: RX_EMP_APPLY is set to disabled\n", + __func__); + return; + } + get_platform_config_field( + ppd->dd, PLATFORM_CONFIG_RX_PRESET_TABLE, + rx_preset_index, RX_PRESET_TABLE_QSFP_RX_EMP, + &rx_preset, 4); + + if ((cache[(128 * 3) + 224] & 0xF) < rx_preset) { + dd_dev_info( + ppd->dd, + "%s: Requested RX EMP %x\n", + __func__, rx_preset); + + dd_dev_info( + ppd->dd, + "%s: Applying supported EMP %x\n", + __func__, cache[608] & 0xF); + + rx_preset = cache[608] & 0xF; + } + + rx_eq = rx_preset | (rx_preset << 4); + + qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 236, &rx_eq, 1); + qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 237, &rx_eq, 1); +} + +static void apply_eq_settings(struct hfi1_pportdata *ppd, + u32 rx_preset_index, u32 tx_preset_index) +{ + u8 *cache = ppd->qsfp_info.cache; + + /* no point going on w/o a page 3 */ + if (cache[2] & 4) { + dd_dev_info(ppd->dd, + "%s: Upper page 03 not present\n", + __func__); + return; + } + + apply_tx_eq_auto(ppd); + + apply_tx_eq_prog(ppd, tx_preset_index); + + apply_rx_eq_emp(ppd, rx_preset_index); +} + +static void apply_rx_amplitude_settings( + struct hfi1_pportdata *ppd, u32 rx_preset_index, + u32 tx_preset_index) +{ + u32 rx_preset; + u8 rx_amp = 0, i = 0, preferred = 0, *cache = ppd->qsfp_info.cache; + + /* no point going on w/o a page 3 */ + if (cache[2] & 4) { + dd_dev_info(ppd->dd, + "%s: Upper page 03 not present\n", + __func__); + return; + } + if (!(cache[QSFP_EQ_INFO_OFFS] & 0x1)) { + dd_dev_info(ppd->dd, + "%s: RX_AMP_APPLY is set to disabled\n", + __func__); + return; + } + + get_platform_config_field(ppd->dd, + PLATFORM_CONFIG_RX_PRESET_TABLE, + rx_preset_index, + RX_PRESET_TABLE_QSFP_RX_AMP_APPLY, + &rx_preset, 4); + + if (!rx_preset) { + dd_dev_info(ppd->dd, + "%s: RX_AMP_APPLY is set to disabled\n", + __func__); + return; + } + get_platform_config_field(ppd->dd, + PLATFORM_CONFIG_RX_PRESET_TABLE, + rx_preset_index, + RX_PRESET_TABLE_QSFP_RX_AMP, + &rx_preset, 4); + + dd_dev_info(ppd->dd, + "%s: Requested RX AMP %x\n", + __func__, + rx_preset); + + for (i = 0; i < 4; i++) { + if (cache[(128 * 3) + 225] & (1 << i)) { + preferred = i; + if (preferred == rx_preset) + break; + } + } + + /* + * Verify that preferred RX amplitude is not just a + * fall through of the default + */ + if (!preferred && !(cache[(128 * 3) + 225] & 0x1)) { + dd_dev_info(ppd->dd, "No supported RX AMP, not applying\n"); + return; + } + + dd_dev_info(ppd->dd, + "%s: Applying RX AMP %x\n", __func__, preferred); + + rx_amp = preferred | (preferred << 4); + qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 238, &rx_amp, 1); + qsfp_write(ppd, ppd->dd->hfi1_id, (256 * 3) + 239, &rx_amp, 1); +} + +#define OPA_INVALID_INDEX 0xFFF + +static void apply_tx_lanes(struct hfi1_pportdata *ppd, u8 field_id, + u32 config_data, const char *message) +{ + u8 i; + int ret; + + for (i = 0; i < 4; i++) { + ret = load_8051_config(ppd->dd, field_id, i, config_data); + if (ret != HCMD_SUCCESS) { + dd_dev_err( + ppd->dd, + "%s: %s for lane %u failed\n", + message, __func__, i); + } + } +} + +/* + * Return a special SerDes setting for low power AOC cables. The power class + * threshold and setting being used were all found by empirical testing. + * + * Summary of the logic: + * + * if (QSFP and QSFP_TYPE == AOC and QSFP_POWER_CLASS < 4) + * return 0xe + * return 0; // leave at default + */ +static u8 aoc_low_power_setting(struct hfi1_pportdata *ppd) +{ + u8 *cache = ppd->qsfp_info.cache; + int power_class; + + /* QSFP only */ + if (ppd->port_type != PORT_TYPE_QSFP) + return 0; /* leave at default */ + + /* active optical cables only */ + switch ((cache[QSFP_MOD_TECH_OFFS] & 0xF0) >> 4) { + case 0x0 ... 0x9: fallthrough; + case 0xC: fallthrough; + case 0xE: + /* active AOC */ + power_class = get_qsfp_power_class(cache[QSFP_MOD_PWR_OFFS]); + if (power_class < QSFP_POWER_CLASS_4) + return 0xe; + } + return 0; /* leave at default */ +} + +static void apply_tunings( + struct hfi1_pportdata *ppd, u32 tx_preset_index, + u8 tuning_method, u32 total_atten, u8 limiting_active) +{ + int ret = 0; + u32 config_data = 0, tx_preset = 0; + u8 precur = 0, attn = 0, postcur = 0, external_device_config = 0; + u8 *cache = ppd->qsfp_info.cache; + + /* Pass tuning method to 8051 */ + read_8051_config(ppd->dd, LINK_TUNING_PARAMETERS, GENERAL_CONFIG, + &config_data); + config_data &= ~(0xff << TUNING_METHOD_SHIFT); + config_data |= ((u32)tuning_method << TUNING_METHOD_SHIFT); + ret = load_8051_config(ppd->dd, LINK_TUNING_PARAMETERS, GENERAL_CONFIG, + config_data); + if (ret != HCMD_SUCCESS) + dd_dev_err(ppd->dd, "%s: Failed to set tuning method\n", + __func__); + + /* Set same channel loss for both TX and RX */ + config_data = 0 | (total_atten << 16) | (total_atten << 24); + apply_tx_lanes(ppd, CHANNEL_LOSS_SETTINGS, config_data, + "Setting channel loss"); + + /* Inform 8051 of cable capabilities */ + if (ppd->qsfp_info.cache_valid) { + external_device_config = + ((cache[QSFP_MOD_PWR_OFFS] & 0x4) << 3) | + ((cache[QSFP_MOD_PWR_OFFS] & 0x8) << 2) | + ((cache[QSFP_EQ_INFO_OFFS] & 0x2) << 1) | + (cache[QSFP_EQ_INFO_OFFS] & 0x4); + ret = read_8051_config(ppd->dd, DC_HOST_COMM_SETTINGS, + GENERAL_CONFIG, &config_data); + /* Clear, then set the external device config field */ + config_data &= ~(u32)0xFF; + config_data |= external_device_config; + ret = load_8051_config(ppd->dd, DC_HOST_COMM_SETTINGS, + GENERAL_CONFIG, config_data); + if (ret != HCMD_SUCCESS) + dd_dev_err(ppd->dd, + "%s: Failed set ext device config params\n", + __func__); + } + + if (tx_preset_index == OPA_INVALID_INDEX) { + if (ppd->port_type == PORT_TYPE_QSFP && limiting_active) + dd_dev_err(ppd->dd, "%s: Invalid Tx preset index\n", + __func__); + return; + } + + /* Following for limiting active channels only */ + get_platform_config_field( + ppd->dd, PLATFORM_CONFIG_TX_PRESET_TABLE, tx_preset_index, + TX_PRESET_TABLE_PRECUR, &tx_preset, 4); + precur = tx_preset; + + get_platform_config_field( + ppd->dd, PLATFORM_CONFIG_TX_PRESET_TABLE, + tx_preset_index, TX_PRESET_TABLE_ATTN, &tx_preset, 4); + attn = tx_preset; + + get_platform_config_field( + ppd->dd, PLATFORM_CONFIG_TX_PRESET_TABLE, + tx_preset_index, TX_PRESET_TABLE_POSTCUR, &tx_preset, 4); + postcur = tx_preset; + + /* + * NOTES: + * o The aoc_low_power_setting is applied to all lanes even + * though only lane 0's value is examined by the firmware. + * o A lingering low power setting after a cable swap does + * not occur. On cable unplug the 8051 is reset and + * restarted on cable insert. This resets all settings to + * their default, erasing any previous low power setting. + */ + config_data = precur | (attn << 8) | (postcur << 16) | + (aoc_low_power_setting(ppd) << 24); + + apply_tx_lanes(ppd, TX_EQ_SETTINGS, config_data, + "Applying TX settings"); +} + +/* Must be holding the QSFP i2c resource */ +static int tune_active_qsfp(struct hfi1_pportdata *ppd, u32 *ptr_tx_preset, + u32 *ptr_rx_preset, u32 *ptr_total_atten) +{ + int ret; + u16 lss = ppd->link_speed_supported, lse = ppd->link_speed_enabled; + u8 *cache = ppd->qsfp_info.cache; + + ppd->qsfp_info.limiting_active = 1; + + ret = set_qsfp_tx(ppd, 0); + if (ret) + return ret; + + ret = qual_power(ppd); + if (ret) + return ret; + + ret = qual_bitrate(ppd); + if (ret) + return ret; + + /* + * We'll change the QSFP memory contents from here on out, thus we set a + * flag here to remind ourselves to reset the QSFP module. This prevents + * reuse of stale settings established in our previous pass through. + */ + if (ppd->qsfp_info.reset_needed) { + ret = reset_qsfp(ppd); + if (ret) + return ret; + refresh_qsfp_cache(ppd, &ppd->qsfp_info); + } else { + ppd->qsfp_info.reset_needed = 1; + } + + ret = set_qsfp_high_power(ppd); + if (ret) + return ret; + + if (cache[QSFP_EQ_INFO_OFFS] & 0x4) { + ret = get_platform_config_field( + ppd->dd, + PLATFORM_CONFIG_PORT_TABLE, 0, + PORT_TABLE_TX_PRESET_IDX_ACTIVE_EQ, + ptr_tx_preset, 4); + if (ret) { + *ptr_tx_preset = OPA_INVALID_INDEX; + return ret; + } + } else { + ret = get_platform_config_field( + ppd->dd, + PLATFORM_CONFIG_PORT_TABLE, 0, + PORT_TABLE_TX_PRESET_IDX_ACTIVE_NO_EQ, + ptr_tx_preset, 4); + if (ret) { + *ptr_tx_preset = OPA_INVALID_INDEX; + return ret; + } + } + + ret = get_platform_config_field( + ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0, + PORT_TABLE_RX_PRESET_IDX, ptr_rx_preset, 4); + if (ret) { + *ptr_rx_preset = OPA_INVALID_INDEX; + return ret; + } + + if ((lss & OPA_LINK_SPEED_25G) && (lse & OPA_LINK_SPEED_25G)) + get_platform_config_field( + ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0, + PORT_TABLE_LOCAL_ATTEN_25G, ptr_total_atten, 4); + else if ((lss & OPA_LINK_SPEED_12_5G) && (lse & OPA_LINK_SPEED_12_5G)) + get_platform_config_field( + ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0, + PORT_TABLE_LOCAL_ATTEN_12G, ptr_total_atten, 4); + + apply_cdr_settings(ppd, *ptr_rx_preset, *ptr_tx_preset); + + apply_eq_settings(ppd, *ptr_rx_preset, *ptr_tx_preset); + + apply_rx_amplitude_settings(ppd, *ptr_rx_preset, *ptr_tx_preset); + + ret = set_qsfp_tx(ppd, 1); + + return ret; +} + +static int tune_qsfp(struct hfi1_pportdata *ppd, + u32 *ptr_tx_preset, u32 *ptr_rx_preset, + u8 *ptr_tuning_method, u32 *ptr_total_atten) +{ + u32 cable_atten = 0, remote_atten = 0, platform_atten = 0; + u16 lss = ppd->link_speed_supported, lse = ppd->link_speed_enabled; + int ret = 0; + u8 *cache = ppd->qsfp_info.cache; + + switch ((cache[QSFP_MOD_TECH_OFFS] & 0xF0) >> 4) { + case 0xA ... 0xB: + ret = get_platform_config_field( + ppd->dd, + PLATFORM_CONFIG_PORT_TABLE, 0, + PORT_TABLE_LOCAL_ATTEN_25G, + &platform_atten, 4); + if (ret) + return ret; + + if ((lss & OPA_LINK_SPEED_25G) && (lse & OPA_LINK_SPEED_25G)) + cable_atten = cache[QSFP_CU_ATTEN_12G_OFFS]; + else if ((lss & OPA_LINK_SPEED_12_5G) && + (lse & OPA_LINK_SPEED_12_5G)) + cable_atten = cache[QSFP_CU_ATTEN_7G_OFFS]; + + /* Fallback to configured attenuation if cable memory is bad */ + if (cable_atten == 0 || cable_atten > 36) { + ret = get_platform_config_field( + ppd->dd, + PLATFORM_CONFIG_SYSTEM_TABLE, 0, + SYSTEM_TABLE_QSFP_ATTENUATION_DEFAULT_25G, + &cable_atten, 4); + if (ret) + return ret; + } + + ret = get_platform_config_field( + ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0, + PORT_TABLE_REMOTE_ATTEN_25G, &remote_atten, 4); + if (ret) + return ret; + + *ptr_total_atten = platform_atten + cable_atten + remote_atten; + + *ptr_tuning_method = OPA_PASSIVE_TUNING; + break; + case 0x0 ... 0x9: fallthrough; + case 0xC: fallthrough; + case 0xE: + ret = tune_active_qsfp(ppd, ptr_tx_preset, ptr_rx_preset, + ptr_total_atten); + if (ret) + return ret; + + *ptr_tuning_method = OPA_ACTIVE_TUNING; + break; + case 0xD: fallthrough; + case 0xF: + default: + dd_dev_warn(ppd->dd, "%s: Unknown/unsupported cable\n", + __func__); + break; + } + return ret; +} + +/* + * This function communicates its success or failure via ppd->driver_link_ready + * Thus, it depends on its association with start_link(...) which checks + * driver_link_ready before proceeding with the link negotiation and + * initialization process. + */ +void tune_serdes(struct hfi1_pportdata *ppd) +{ + int ret = 0; + u32 total_atten = 0; + u32 remote_atten = 0, platform_atten = 0; + u32 rx_preset_index, tx_preset_index; + u8 tuning_method = 0, limiting_active = 0; + struct hfi1_devdata *dd = ppd->dd; + + rx_preset_index = OPA_INVALID_INDEX; + tx_preset_index = OPA_INVALID_INDEX; + + /* the link defaults to enabled */ + ppd->link_enabled = 1; + /* the driver link ready state defaults to not ready */ + ppd->driver_link_ready = 0; + ppd->offline_disabled_reason = HFI1_ODR_MASK(OPA_LINKDOWN_REASON_NONE); + + /* Skip the tuning for testing (loopback != none) and simulations */ + if (loopback != LOOPBACK_NONE || + ppd->dd->icode == ICODE_FUNCTIONAL_SIMULATOR) { + ppd->driver_link_ready = 1; + + if (qsfp_mod_present(ppd)) { + ret = acquire_chip_resource(ppd->dd, + qsfp_resource(ppd->dd), + QSFP_WAIT); + if (ret) { + dd_dev_err(ppd->dd, "%s: hfi%d: cannot lock i2c chain\n", + __func__, (int)ppd->dd->hfi1_id); + goto bail; + } + + refresh_qsfp_cache(ppd, &ppd->qsfp_info); + release_chip_resource(ppd->dd, qsfp_resource(ppd->dd)); + } + + return; + } + + switch (ppd->port_type) { + case PORT_TYPE_DISCONNECTED: + ppd->offline_disabled_reason = + HFI1_ODR_MASK(OPA_LINKDOWN_REASON_DISCONNECTED); + dd_dev_warn(dd, "%s: Port disconnected, disabling port\n", + __func__); + goto bail; + case PORT_TYPE_FIXED: + /* platform_atten, remote_atten pre-zeroed to catch error */ + get_platform_config_field( + ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0, + PORT_TABLE_LOCAL_ATTEN_25G, &platform_atten, 4); + + get_platform_config_field( + ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0, + PORT_TABLE_REMOTE_ATTEN_25G, &remote_atten, 4); + + total_atten = platform_atten + remote_atten; + + tuning_method = OPA_PASSIVE_TUNING; + break; + case PORT_TYPE_VARIABLE: + if (qsfp_mod_present(ppd)) { + /* + * platform_atten, remote_atten pre-zeroed to + * catch error + */ + get_platform_config_field( + ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0, + PORT_TABLE_LOCAL_ATTEN_25G, + &platform_atten, 4); + + get_platform_config_field( + ppd->dd, PLATFORM_CONFIG_PORT_TABLE, 0, + PORT_TABLE_REMOTE_ATTEN_25G, + &remote_atten, 4); + + total_atten = platform_atten + remote_atten; + + tuning_method = OPA_PASSIVE_TUNING; + } else { + ppd->offline_disabled_reason = + HFI1_ODR_MASK(OPA_LINKDOWN_REASON_CHASSIS_CONFIG); + goto bail; + } + break; + case PORT_TYPE_QSFP: + if (qsfp_mod_present(ppd)) { + ret = acquire_chip_resource(ppd->dd, + qsfp_resource(ppd->dd), + QSFP_WAIT); + if (ret) { + dd_dev_err(ppd->dd, "%s: hfi%d: cannot lock i2c chain\n", + __func__, (int)ppd->dd->hfi1_id); + goto bail; + } + refresh_qsfp_cache(ppd, &ppd->qsfp_info); + + if (ppd->qsfp_info.cache_valid) { + ret = tune_qsfp(ppd, + &tx_preset_index, + &rx_preset_index, + &tuning_method, + &total_atten); + + /* + * We may have modified the QSFP memory, so + * update the cache to reflect the changes + */ + refresh_qsfp_cache(ppd, &ppd->qsfp_info); + limiting_active = + ppd->qsfp_info.limiting_active; + } else { + dd_dev_err(dd, + "%s: Reading QSFP memory failed\n", + __func__); + ret = -EINVAL; /* a fail indication */ + } + release_chip_resource(ppd->dd, qsfp_resource(ppd->dd)); + if (ret) + goto bail; + } else { + ppd->offline_disabled_reason = + HFI1_ODR_MASK( + OPA_LINKDOWN_REASON_LOCAL_MEDIA_NOT_INSTALLED); + goto bail; + } + break; + default: + dd_dev_warn(ppd->dd, "%s: Unknown port type\n", __func__); + ppd->port_type = PORT_TYPE_UNKNOWN; + tuning_method = OPA_UNKNOWN_TUNING; + total_atten = 0; + limiting_active = 0; + tx_preset_index = OPA_INVALID_INDEX; + break; + } + + if (ppd->offline_disabled_reason == + HFI1_ODR_MASK(OPA_LINKDOWN_REASON_NONE)) + apply_tunings(ppd, tx_preset_index, tuning_method, + total_atten, limiting_active); + + if (!ret) + ppd->driver_link_ready = 1; + + return; +bail: + ppd->driver_link_ready = 0; +} |