diff options
Diffstat (limited to 'drivers/infiniband/hw/qib/qib_iba6120.c')
| -rw-r--r-- | drivers/infiniband/hw/qib/qib_iba6120.c | 3536 |
1 files changed, 3536 insertions, 0 deletions
diff --git a/drivers/infiniband/hw/qib/qib_iba6120.c b/drivers/infiniband/hw/qib/qib_iba6120.c new file mode 100644 index 000000000..44150be21 --- /dev/null +++ b/drivers/infiniband/hw/qib/qib_iba6120.c @@ -0,0 +1,3536 @@ +/* + * Copyright (c) 2013 - 2017 Intel Corporation. All rights reserved. + * Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation. + * All rights reserved. + * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ +/* + * This file contains all of the code that is specific to the + * QLogic_IB 6120 PCIe chip. + */ + +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <rdma/ib_verbs.h> + +#include "qib.h" +#include "qib_6120_regs.h" + +static void qib_6120_setup_setextled(struct qib_pportdata *, u32); +static void sendctrl_6120_mod(struct qib_pportdata *ppd, u32 op); +static u8 qib_6120_phys_portstate(u64); +static u32 qib_6120_iblink_state(u64); + +/* + * This file contains all the chip-specific register information and + * access functions for the Intel Intel_IB PCI-Express chip. + * + */ + +/* KREG_IDX uses machine-generated #defines */ +#define KREG_IDX(regname) (QIB_6120_##regname##_OFFS / sizeof(u64)) + +/* Use defines to tie machine-generated names to lower-case names */ +#define kr_extctrl KREG_IDX(EXTCtrl) +#define kr_extstatus KREG_IDX(EXTStatus) +#define kr_gpio_clear KREG_IDX(GPIOClear) +#define kr_gpio_mask KREG_IDX(GPIOMask) +#define kr_gpio_out KREG_IDX(GPIOOut) +#define kr_gpio_status KREG_IDX(GPIOStatus) +#define kr_rcvctrl KREG_IDX(RcvCtrl) +#define kr_sendctrl KREG_IDX(SendCtrl) +#define kr_partitionkey KREG_IDX(RcvPartitionKey) +#define kr_hwdiagctrl KREG_IDX(HwDiagCtrl) +#define kr_ibcstatus KREG_IDX(IBCStatus) +#define kr_ibcctrl KREG_IDX(IBCCtrl) +#define kr_sendbuffererror KREG_IDX(SendBufErr0) +#define kr_rcvbthqp KREG_IDX(RcvBTHQP) +#define kr_counterregbase KREG_IDX(CntrRegBase) +#define kr_palign KREG_IDX(PageAlign) +#define kr_rcvegrbase KREG_IDX(RcvEgrBase) +#define kr_rcvegrcnt KREG_IDX(RcvEgrCnt) +#define kr_rcvhdrcnt KREG_IDX(RcvHdrCnt) +#define kr_rcvhdrentsize KREG_IDX(RcvHdrEntSize) +#define kr_rcvhdrsize KREG_IDX(RcvHdrSize) +#define kr_rcvtidbase KREG_IDX(RcvTIDBase) +#define kr_rcvtidcnt KREG_IDX(RcvTIDCnt) +#define kr_scratch KREG_IDX(Scratch) +#define kr_sendctrl KREG_IDX(SendCtrl) +#define kr_sendpioavailaddr KREG_IDX(SendPIOAvailAddr) +#define kr_sendpiobufbase KREG_IDX(SendPIOBufBase) +#define kr_sendpiobufcnt KREG_IDX(SendPIOBufCnt) +#define kr_sendpiosize KREG_IDX(SendPIOSize) +#define kr_sendregbase KREG_IDX(SendRegBase) +#define kr_userregbase KREG_IDX(UserRegBase) +#define kr_control KREG_IDX(Control) +#define kr_intclear KREG_IDX(IntClear) +#define kr_intmask KREG_IDX(IntMask) +#define kr_intstatus KREG_IDX(IntStatus) +#define kr_errclear KREG_IDX(ErrClear) +#define kr_errmask KREG_IDX(ErrMask) +#define kr_errstatus KREG_IDX(ErrStatus) +#define kr_hwerrclear KREG_IDX(HwErrClear) +#define kr_hwerrmask KREG_IDX(HwErrMask) +#define kr_hwerrstatus KREG_IDX(HwErrStatus) +#define kr_revision KREG_IDX(Revision) +#define kr_portcnt KREG_IDX(PortCnt) +#define kr_serdes_cfg0 KREG_IDX(SerdesCfg0) +#define kr_serdes_cfg1 (kr_serdes_cfg0 + 1) +#define kr_serdes_stat KREG_IDX(SerdesStat) +#define kr_xgxs_cfg KREG_IDX(XGXSCfg) + +/* These must only be written via qib_write_kreg_ctxt() */ +#define kr_rcvhdraddr KREG_IDX(RcvHdrAddr0) +#define kr_rcvhdrtailaddr KREG_IDX(RcvHdrTailAddr0) + +#define CREG_IDX(regname) ((QIB_6120_##regname##_OFFS - \ + QIB_6120_LBIntCnt_OFFS) / sizeof(u64)) + +#define cr_badformat CREG_IDX(RxBadFormatCnt) +#define cr_erricrc CREG_IDX(RxICRCErrCnt) +#define cr_errlink CREG_IDX(RxLinkProblemCnt) +#define cr_errlpcrc CREG_IDX(RxLPCRCErrCnt) +#define cr_errpkey CREG_IDX(RxPKeyMismatchCnt) +#define cr_rcvflowctrl_err CREG_IDX(RxFlowCtrlErrCnt) +#define cr_err_rlen CREG_IDX(RxLenErrCnt) +#define cr_errslen CREG_IDX(TxLenErrCnt) +#define cr_errtidfull CREG_IDX(RxTIDFullErrCnt) +#define cr_errtidvalid CREG_IDX(RxTIDValidErrCnt) +#define cr_errvcrc CREG_IDX(RxVCRCErrCnt) +#define cr_ibstatuschange CREG_IDX(IBStatusChangeCnt) +#define cr_lbint CREG_IDX(LBIntCnt) +#define cr_invalidrlen CREG_IDX(RxMaxMinLenErrCnt) +#define cr_invalidslen CREG_IDX(TxMaxMinLenErrCnt) +#define cr_lbflowstall CREG_IDX(LBFlowStallCnt) +#define cr_pktrcv CREG_IDX(RxDataPktCnt) +#define cr_pktrcvflowctrl CREG_IDX(RxFlowPktCnt) +#define cr_pktsend CREG_IDX(TxDataPktCnt) +#define cr_pktsendflow CREG_IDX(TxFlowPktCnt) +#define cr_portovfl CREG_IDX(RxP0HdrEgrOvflCnt) +#define cr_rcvebp CREG_IDX(RxEBPCnt) +#define cr_rcvovfl CREG_IDX(RxBufOvflCnt) +#define cr_senddropped CREG_IDX(TxDroppedPktCnt) +#define cr_sendstall CREG_IDX(TxFlowStallCnt) +#define cr_sendunderrun CREG_IDX(TxUnderrunCnt) +#define cr_wordrcv CREG_IDX(RxDwordCnt) +#define cr_wordsend CREG_IDX(TxDwordCnt) +#define cr_txunsupvl CREG_IDX(TxUnsupVLErrCnt) +#define cr_rxdroppkt CREG_IDX(RxDroppedPktCnt) +#define cr_iblinkerrrecov CREG_IDX(IBLinkErrRecoveryCnt) +#define cr_iblinkdown CREG_IDX(IBLinkDownedCnt) +#define cr_ibsymbolerr CREG_IDX(IBSymbolErrCnt) + +#define SYM_RMASK(regname, fldname) ((u64) \ + QIB_6120_##regname##_##fldname##_RMASK) +#define SYM_MASK(regname, fldname) ((u64) \ + QIB_6120_##regname##_##fldname##_RMASK << \ + QIB_6120_##regname##_##fldname##_LSB) +#define SYM_LSB(regname, fldname) (QIB_6120_##regname##_##fldname##_LSB) + +#define SYM_FIELD(value, regname, fldname) ((u64) \ + (((value) >> SYM_LSB(regname, fldname)) & \ + SYM_RMASK(regname, fldname))) +#define ERR_MASK(fldname) SYM_MASK(ErrMask, fldname##Mask) +#define HWE_MASK(fldname) SYM_MASK(HwErrMask, fldname##Mask) + +/* link training states, from IBC */ +#define IB_6120_LT_STATE_DISABLED 0x00 +#define IB_6120_LT_STATE_LINKUP 0x01 +#define IB_6120_LT_STATE_POLLACTIVE 0x02 +#define IB_6120_LT_STATE_POLLQUIET 0x03 +#define IB_6120_LT_STATE_SLEEPDELAY 0x04 +#define IB_6120_LT_STATE_SLEEPQUIET 0x05 +#define IB_6120_LT_STATE_CFGDEBOUNCE 0x08 +#define IB_6120_LT_STATE_CFGRCVFCFG 0x09 +#define IB_6120_LT_STATE_CFGWAITRMT 0x0a +#define IB_6120_LT_STATE_CFGIDLE 0x0b +#define IB_6120_LT_STATE_RECOVERRETRAIN 0x0c +#define IB_6120_LT_STATE_RECOVERWAITRMT 0x0e +#define IB_6120_LT_STATE_RECOVERIDLE 0x0f + +/* link state machine states from IBC */ +#define IB_6120_L_STATE_DOWN 0x0 +#define IB_6120_L_STATE_INIT 0x1 +#define IB_6120_L_STATE_ARM 0x2 +#define IB_6120_L_STATE_ACTIVE 0x3 +#define IB_6120_L_STATE_ACT_DEFER 0x4 + +static const u8 qib_6120_physportstate[0x20] = { + [IB_6120_LT_STATE_DISABLED] = IB_PHYSPORTSTATE_DISABLED, + [IB_6120_LT_STATE_LINKUP] = IB_PHYSPORTSTATE_LINKUP, + [IB_6120_LT_STATE_POLLACTIVE] = IB_PHYSPORTSTATE_POLL, + [IB_6120_LT_STATE_POLLQUIET] = IB_PHYSPORTSTATE_POLL, + [IB_6120_LT_STATE_SLEEPDELAY] = IB_PHYSPORTSTATE_SLEEP, + [IB_6120_LT_STATE_SLEEPQUIET] = IB_PHYSPORTSTATE_SLEEP, + [IB_6120_LT_STATE_CFGDEBOUNCE] = + IB_PHYSPORTSTATE_CFG_TRAIN, + [IB_6120_LT_STATE_CFGRCVFCFG] = + IB_PHYSPORTSTATE_CFG_TRAIN, + [IB_6120_LT_STATE_CFGWAITRMT] = + IB_PHYSPORTSTATE_CFG_TRAIN, + [IB_6120_LT_STATE_CFGIDLE] = IB_PHYSPORTSTATE_CFG_TRAIN, + [IB_6120_LT_STATE_RECOVERRETRAIN] = + IB_PHYSPORTSTATE_LINK_ERR_RECOVER, + [IB_6120_LT_STATE_RECOVERWAITRMT] = + IB_PHYSPORTSTATE_LINK_ERR_RECOVER, + [IB_6120_LT_STATE_RECOVERIDLE] = + IB_PHYSPORTSTATE_LINK_ERR_RECOVER, + [0x10] = IB_PHYSPORTSTATE_CFG_TRAIN, + [0x11] = IB_PHYSPORTSTATE_CFG_TRAIN, + [0x12] = IB_PHYSPORTSTATE_CFG_TRAIN, + [0x13] = IB_PHYSPORTSTATE_CFG_TRAIN, + [0x14] = IB_PHYSPORTSTATE_CFG_TRAIN, + [0x15] = IB_PHYSPORTSTATE_CFG_TRAIN, + [0x16] = IB_PHYSPORTSTATE_CFG_TRAIN, + [0x17] = IB_PHYSPORTSTATE_CFG_TRAIN +}; + + +struct qib_chip_specific { + u64 __iomem *cregbase; + u64 *cntrs; + u64 *portcntrs; + void *dummy_hdrq; /* used after ctxt close */ + dma_addr_t dummy_hdrq_phys; + spinlock_t kernel_tid_lock; /* no back to back kernel TID writes */ + spinlock_t user_tid_lock; /* no back to back user TID writes */ + spinlock_t rcvmod_lock; /* protect rcvctrl shadow changes */ + spinlock_t gpio_lock; /* RMW of shadows/regs for ExtCtrl and GPIO */ + u64 hwerrmask; + u64 errormask; + u64 gpio_out; /* shadow of kr_gpio_out, for rmw ops */ + u64 gpio_mask; /* shadow the gpio mask register */ + u64 extctrl; /* shadow the gpio output enable, etc... */ + /* + * these 5 fields are used to establish deltas for IB symbol + * errors and linkrecovery errors. They can be reported on + * some chips during link negotiation prior to INIT, and with + * DDR when faking DDR negotiations with non-IBTA switches. + * The chip counters are adjusted at driver unload if there is + * a non-zero delta. + */ + u64 ibdeltainprog; + u64 ibsymdelta; + u64 ibsymsnap; + u64 iblnkerrdelta; + u64 iblnkerrsnap; + u64 ibcctrl; /* shadow for kr_ibcctrl */ + u32 lastlinkrecov; /* link recovery issue */ + u32 cntrnamelen; + u32 portcntrnamelen; + u32 ncntrs; + u32 nportcntrs; + /* used with gpio interrupts to implement IB counters */ + u32 rxfc_unsupvl_errs; + u32 overrun_thresh_errs; + /* + * these count only cases where _successive_ LocalLinkIntegrity + * errors were seen in the receive headers of IB standard packets + */ + u32 lli_errs; + u32 lli_counter; + u64 lli_thresh; + u64 sword; /* total dwords sent (sample result) */ + u64 rword; /* total dwords received (sample result) */ + u64 spkts; /* total packets sent (sample result) */ + u64 rpkts; /* total packets received (sample result) */ + u64 xmit_wait; /* # of ticks no data sent (sample result) */ + struct timer_list pma_timer; + struct qib_pportdata *ppd; + char emsgbuf[128]; + char bitsmsgbuf[64]; + u8 pma_sample_status; +}; + +/* ibcctrl bits */ +#define QLOGIC_IB_IBCC_LINKINITCMD_DISABLE 1 +/* cycle through TS1/TS2 till OK */ +#define QLOGIC_IB_IBCC_LINKINITCMD_POLL 2 +/* wait for TS1, then go on */ +#define QLOGIC_IB_IBCC_LINKINITCMD_SLEEP 3 +#define QLOGIC_IB_IBCC_LINKINITCMD_SHIFT 16 + +#define QLOGIC_IB_IBCC_LINKCMD_DOWN 1 /* move to 0x11 */ +#define QLOGIC_IB_IBCC_LINKCMD_ARMED 2 /* move to 0x21 */ +#define QLOGIC_IB_IBCC_LINKCMD_ACTIVE 3 /* move to 0x31 */ +#define QLOGIC_IB_IBCC_LINKCMD_SHIFT 18 + +/* + * We could have a single register get/put routine, that takes a group type, + * but this is somewhat clearer and cleaner. It also gives us some error + * checking. 64 bit register reads should always work, but are inefficient + * on opteron (the northbridge always generates 2 separate HT 32 bit reads), + * so we use kreg32 wherever possible. User register and counter register + * reads are always 32 bit reads, so only one form of those routines. + */ + +/** + * qib_read_ureg32 - read 32-bit virtualized per-context register + * @dd: device + * @regno: register number + * @ctxt: context number + * + * Return the contents of a register that is virtualized to be per context. + * Returns -1 on errors (not distinguishable from valid contents at + * runtime; we may add a separate error variable at some point). + */ +static inline u32 qib_read_ureg32(const struct qib_devdata *dd, + enum qib_ureg regno, int ctxt) +{ + if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) + return 0; + + if (dd->userbase) + return readl(regno + (u64 __iomem *) + ((char __iomem *)dd->userbase + + dd->ureg_align * ctxt)); + else + return readl(regno + (u64 __iomem *) + (dd->uregbase + + (char __iomem *)dd->kregbase + + dd->ureg_align * ctxt)); +} + +/** + * qib_write_ureg - write 32-bit virtualized per-context register + * @dd: device + * @regno: register number + * @value: value + * @ctxt: context + * + * Write the contents of a register that is virtualized to be per context. + */ +static inline void qib_write_ureg(const struct qib_devdata *dd, + enum qib_ureg regno, u64 value, int ctxt) +{ + u64 __iomem *ubase; + + if (dd->userbase) + ubase = (u64 __iomem *) + ((char __iomem *) dd->userbase + + dd->ureg_align * ctxt); + else + ubase = (u64 __iomem *) + (dd->uregbase + + (char __iomem *) dd->kregbase + + dd->ureg_align * ctxt); + + if (dd->kregbase && (dd->flags & QIB_PRESENT)) + writeq(value, &ubase[regno]); +} + +static inline u32 qib_read_kreg32(const struct qib_devdata *dd, + const u16 regno) +{ + if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) + return -1; + return readl((u32 __iomem *)&dd->kregbase[regno]); +} + +static inline u64 qib_read_kreg64(const struct qib_devdata *dd, + const u16 regno) +{ + if (!dd->kregbase || !(dd->flags & QIB_PRESENT)) + return -1; + + return readq(&dd->kregbase[regno]); +} + +static inline void qib_write_kreg(const struct qib_devdata *dd, + const u16 regno, u64 value) +{ + if (dd->kregbase && (dd->flags & QIB_PRESENT)) + writeq(value, &dd->kregbase[regno]); +} + +/** + * qib_write_kreg_ctxt - write a device's per-ctxt 64-bit kernel register + * @dd: the qlogic_ib device + * @regno: the register number to write + * @ctxt: the context containing the register + * @value: the value to write + */ +static inline void qib_write_kreg_ctxt(const struct qib_devdata *dd, + const u16 regno, unsigned ctxt, + u64 value) +{ + qib_write_kreg(dd, regno + ctxt, value); +} + +static inline void write_6120_creg(const struct qib_devdata *dd, + u16 regno, u64 value) +{ + if (dd->cspec->cregbase && (dd->flags & QIB_PRESENT)) + writeq(value, &dd->cspec->cregbase[regno]); +} + +static inline u64 read_6120_creg(const struct qib_devdata *dd, u16 regno) +{ + if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT)) + return 0; + return readq(&dd->cspec->cregbase[regno]); +} + +static inline u32 read_6120_creg32(const struct qib_devdata *dd, u16 regno) +{ + if (!dd->cspec->cregbase || !(dd->flags & QIB_PRESENT)) + return 0; + return readl(&dd->cspec->cregbase[regno]); +} + +/* kr_control bits */ +#define QLOGIC_IB_C_RESET 1U + +/* kr_intstatus, kr_intclear, kr_intmask bits */ +#define QLOGIC_IB_I_RCVURG_MASK ((1U << 5) - 1) +#define QLOGIC_IB_I_RCVURG_SHIFT 0 +#define QLOGIC_IB_I_RCVAVAIL_MASK ((1U << 5) - 1) +#define QLOGIC_IB_I_RCVAVAIL_SHIFT 12 + +#define QLOGIC_IB_C_FREEZEMODE 0x00000002 +#define QLOGIC_IB_C_LINKENABLE 0x00000004 +#define QLOGIC_IB_I_ERROR 0x0000000080000000ULL +#define QLOGIC_IB_I_SPIOSENT 0x0000000040000000ULL +#define QLOGIC_IB_I_SPIOBUFAVAIL 0x0000000020000000ULL +#define QLOGIC_IB_I_GPIO 0x0000000010000000ULL +#define QLOGIC_IB_I_BITSEXTANT \ + ((QLOGIC_IB_I_RCVURG_MASK << QLOGIC_IB_I_RCVURG_SHIFT) | \ + (QLOGIC_IB_I_RCVAVAIL_MASK << \ + QLOGIC_IB_I_RCVAVAIL_SHIFT) | \ + QLOGIC_IB_I_ERROR | QLOGIC_IB_I_SPIOSENT | \ + QLOGIC_IB_I_SPIOBUFAVAIL | QLOGIC_IB_I_GPIO) + +/* kr_hwerrclear, kr_hwerrmask, kr_hwerrstatus, bits */ +#define QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK 0x000000000000003fULL +#define QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT 0 +#define QLOGIC_IB_HWE_PCIEPOISONEDTLP 0x0000000010000000ULL +#define QLOGIC_IB_HWE_PCIECPLTIMEOUT 0x0000000020000000ULL +#define QLOGIC_IB_HWE_PCIEBUSPARITYXTLH 0x0000000040000000ULL +#define QLOGIC_IB_HWE_PCIEBUSPARITYXADM 0x0000000080000000ULL +#define QLOGIC_IB_HWE_PCIEBUSPARITYRADM 0x0000000100000000ULL +#define QLOGIC_IB_HWE_COREPLL_FBSLIP 0x0080000000000000ULL +#define QLOGIC_IB_HWE_COREPLL_RFSLIP 0x0100000000000000ULL +#define QLOGIC_IB_HWE_PCIE1PLLFAILED 0x0400000000000000ULL +#define QLOGIC_IB_HWE_PCIE0PLLFAILED 0x0800000000000000ULL +#define QLOGIC_IB_HWE_SERDESPLLFAILED 0x1000000000000000ULL + + +/* kr_extstatus bits */ +#define QLOGIC_IB_EXTS_FREQSEL 0x2 +#define QLOGIC_IB_EXTS_SERDESSEL 0x4 +#define QLOGIC_IB_EXTS_MEMBIST_ENDTEST 0x0000000000004000 +#define QLOGIC_IB_EXTS_MEMBIST_FOUND 0x0000000000008000 + +/* kr_xgxsconfig bits */ +#define QLOGIC_IB_XGXS_RESET 0x5ULL + +#define _QIB_GPIO_SDA_NUM 1 +#define _QIB_GPIO_SCL_NUM 0 + +/* Bits in GPIO for the added IB link interrupts */ +#define GPIO_RXUVL_BIT 3 +#define GPIO_OVRUN_BIT 4 +#define GPIO_LLI_BIT 5 +#define GPIO_ERRINTR_MASK 0x38 + + +#define QLOGIC_IB_RT_BUFSIZE_MASK 0xe0000000ULL +#define QLOGIC_IB_RT_BUFSIZE_SHIFTVAL(tid) \ + ((((tid) & QLOGIC_IB_RT_BUFSIZE_MASK) >> 29) + 11 - 1) +#define QLOGIC_IB_RT_BUFSIZE(tid) (1 << QLOGIC_IB_RT_BUFSIZE_SHIFTVAL(tid)) +#define QLOGIC_IB_RT_IS_VALID(tid) \ + (((tid) & QLOGIC_IB_RT_BUFSIZE_MASK) && \ + ((((tid) & QLOGIC_IB_RT_BUFSIZE_MASK) != QLOGIC_IB_RT_BUFSIZE_MASK))) +#define QLOGIC_IB_RT_ADDR_MASK 0x1FFFFFFFULL /* 29 bits valid */ +#define QLOGIC_IB_RT_ADDR_SHIFT 10 + +#define QLOGIC_IB_R_INTRAVAIL_SHIFT 16 +#define QLOGIC_IB_R_TAILUPD_SHIFT 31 +#define IBA6120_R_PKEY_DIS_SHIFT 30 + +#define PBC_6120_VL15_SEND_CTRL (1ULL << 31) /* pbc; VL15; link_buf only */ + +#define IBCBUSFRSPCPARITYERR HWE_MASK(IBCBusFromSPCParityErr) +#define IBCBUSTOSPCPARITYERR HWE_MASK(IBCBusToSPCParityErr) + +#define SYM_MASK_BIT(regname, fldname, bit) ((u64) \ + ((1ULL << (SYM_LSB(regname, fldname) + (bit))))) + +#define TXEMEMPARITYERR_PIOBUF \ + SYM_MASK_BIT(HwErrMask, TXEMemParityErrMask, 0) +#define TXEMEMPARITYERR_PIOPBC \ + SYM_MASK_BIT(HwErrMask, TXEMemParityErrMask, 1) +#define TXEMEMPARITYERR_PIOLAUNCHFIFO \ + SYM_MASK_BIT(HwErrMask, TXEMemParityErrMask, 2) + +#define RXEMEMPARITYERR_RCVBUF \ + SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 0) +#define RXEMEMPARITYERR_LOOKUPQ \ + SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 1) +#define RXEMEMPARITYERR_EXPTID \ + SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 2) +#define RXEMEMPARITYERR_EAGERTID \ + SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 3) +#define RXEMEMPARITYERR_FLAGBUF \ + SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 4) +#define RXEMEMPARITYERR_DATAINFO \ + SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 5) +#define RXEMEMPARITYERR_HDRINFO \ + SYM_MASK_BIT(HwErrMask, RXEMemParityErrMask, 6) + +/* 6120 specific hardware errors... */ +static const struct qib_hwerror_msgs qib_6120_hwerror_msgs[] = { + /* generic hardware errors */ + QLOGIC_IB_HWE_MSG(IBCBUSFRSPCPARITYERR, "QIB2IB Parity"), + QLOGIC_IB_HWE_MSG(IBCBUSTOSPCPARITYERR, "IB2QIB Parity"), + + QLOGIC_IB_HWE_MSG(TXEMEMPARITYERR_PIOBUF, + "TXE PIOBUF Memory Parity"), + QLOGIC_IB_HWE_MSG(TXEMEMPARITYERR_PIOPBC, + "TXE PIOPBC Memory Parity"), + QLOGIC_IB_HWE_MSG(TXEMEMPARITYERR_PIOLAUNCHFIFO, + "TXE PIOLAUNCHFIFO Memory Parity"), + + QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_RCVBUF, + "RXE RCVBUF Memory Parity"), + QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_LOOKUPQ, + "RXE LOOKUPQ Memory Parity"), + QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_EAGERTID, + "RXE EAGERTID Memory Parity"), + QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_EXPTID, + "RXE EXPTID Memory Parity"), + QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_FLAGBUF, + "RXE FLAGBUF Memory Parity"), + QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_DATAINFO, + "RXE DATAINFO Memory Parity"), + QLOGIC_IB_HWE_MSG(RXEMEMPARITYERR_HDRINFO, + "RXE HDRINFO Memory Parity"), + + /* chip-specific hardware errors */ + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEPOISONEDTLP, + "PCIe Poisoned TLP"), + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIECPLTIMEOUT, + "PCIe completion timeout"), + /* + * In practice, it's unlikely wthat we'll see PCIe PLL, or bus + * parity or memory parity error failures, because most likely we + * won't be able to talk to the core of the chip. Nonetheless, we + * might see them, if they are in parts of the PCIe core that aren't + * essential. + */ + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIE1PLLFAILED, + "PCIePLL1"), + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIE0PLLFAILED, + "PCIePLL0"), + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEBUSPARITYXTLH, + "PCIe XTLH core parity"), + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEBUSPARITYXADM, + "PCIe ADM TX core parity"), + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_PCIEBUSPARITYRADM, + "PCIe ADM RX core parity"), + QLOGIC_IB_HWE_MSG(QLOGIC_IB_HWE_SERDESPLLFAILED, + "SerDes PLL"), +}; + +#define TXE_PIO_PARITY (TXEMEMPARITYERR_PIOBUF | TXEMEMPARITYERR_PIOPBC) +#define _QIB_PLL_FAIL (QLOGIC_IB_HWE_COREPLL_FBSLIP | \ + QLOGIC_IB_HWE_COREPLL_RFSLIP) + + /* variables for sanity checking interrupt and errors */ +#define IB_HWE_BITSEXTANT \ + (HWE_MASK(RXEMemParityErr) | \ + HWE_MASK(TXEMemParityErr) | \ + (QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK << \ + QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT) | \ + QLOGIC_IB_HWE_PCIE1PLLFAILED | \ + QLOGIC_IB_HWE_PCIE0PLLFAILED | \ + QLOGIC_IB_HWE_PCIEPOISONEDTLP | \ + QLOGIC_IB_HWE_PCIECPLTIMEOUT | \ + QLOGIC_IB_HWE_PCIEBUSPARITYXTLH | \ + QLOGIC_IB_HWE_PCIEBUSPARITYXADM | \ + QLOGIC_IB_HWE_PCIEBUSPARITYRADM | \ + HWE_MASK(PowerOnBISTFailed) | \ + QLOGIC_IB_HWE_COREPLL_FBSLIP | \ + QLOGIC_IB_HWE_COREPLL_RFSLIP | \ + QLOGIC_IB_HWE_SERDESPLLFAILED | \ + HWE_MASK(IBCBusToSPCParityErr) | \ + HWE_MASK(IBCBusFromSPCParityErr)) + +#define IB_E_BITSEXTANT \ + (ERR_MASK(RcvFormatErr) | ERR_MASK(RcvVCRCErr) | \ + ERR_MASK(RcvICRCErr) | ERR_MASK(RcvMinPktLenErr) | \ + ERR_MASK(RcvMaxPktLenErr) | ERR_MASK(RcvLongPktLenErr) | \ + ERR_MASK(RcvShortPktLenErr) | ERR_MASK(RcvUnexpectedCharErr) | \ + ERR_MASK(RcvUnsupportedVLErr) | ERR_MASK(RcvEBPErr) | \ + ERR_MASK(RcvIBFlowErr) | ERR_MASK(RcvBadVersionErr) | \ + ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr) | \ + ERR_MASK(RcvBadTidErr) | ERR_MASK(RcvHdrLenErr) | \ + ERR_MASK(RcvHdrErr) | ERR_MASK(RcvIBLostLinkErr) | \ + ERR_MASK(SendMinPktLenErr) | ERR_MASK(SendMaxPktLenErr) | \ + ERR_MASK(SendUnderRunErr) | ERR_MASK(SendPktLenErr) | \ + ERR_MASK(SendDroppedSmpPktErr) | \ + ERR_MASK(SendDroppedDataPktErr) | \ + ERR_MASK(SendPioArmLaunchErr) | \ + ERR_MASK(SendUnexpectedPktNumErr) | \ + ERR_MASK(SendUnsupportedVLErr) | ERR_MASK(IBStatusChanged) | \ + ERR_MASK(InvalidAddrErr) | ERR_MASK(ResetNegated) | \ + ERR_MASK(HardwareErr)) + +#define QLOGIC_IB_E_PKTERRS ( \ + ERR_MASK(SendPktLenErr) | \ + ERR_MASK(SendDroppedDataPktErr) | \ + ERR_MASK(RcvVCRCErr) | \ + ERR_MASK(RcvICRCErr) | \ + ERR_MASK(RcvShortPktLenErr) | \ + ERR_MASK(RcvEBPErr)) + +/* These are all rcv-related errors which we want to count for stats */ +#define E_SUM_PKTERRS \ + (ERR_MASK(RcvHdrLenErr) | ERR_MASK(RcvBadTidErr) | \ + ERR_MASK(RcvBadVersionErr) | ERR_MASK(RcvHdrErr) | \ + ERR_MASK(RcvLongPktLenErr) | ERR_MASK(RcvShortPktLenErr) | \ + ERR_MASK(RcvMaxPktLenErr) | ERR_MASK(RcvMinPktLenErr) | \ + ERR_MASK(RcvFormatErr) | ERR_MASK(RcvUnsupportedVLErr) | \ + ERR_MASK(RcvUnexpectedCharErr) | ERR_MASK(RcvEBPErr)) + +/* These are all send-related errors which we want to count for stats */ +#define E_SUM_ERRS \ + (ERR_MASK(SendPioArmLaunchErr) | \ + ERR_MASK(SendUnexpectedPktNumErr) | \ + ERR_MASK(SendDroppedDataPktErr) | \ + ERR_MASK(SendDroppedSmpPktErr) | \ + ERR_MASK(SendMaxPktLenErr) | ERR_MASK(SendUnsupportedVLErr) | \ + ERR_MASK(SendMinPktLenErr) | ERR_MASK(SendPktLenErr) | \ + ERR_MASK(InvalidAddrErr)) + +/* + * this is similar to E_SUM_ERRS, but can't ignore armlaunch, don't ignore + * errors not related to freeze and cancelling buffers. Can't ignore + * armlaunch because could get more while still cleaning up, and need + * to cancel those as they happen. + */ +#define E_SPKT_ERRS_IGNORE \ + (ERR_MASK(SendDroppedDataPktErr) | \ + ERR_MASK(SendDroppedSmpPktErr) | \ + ERR_MASK(SendMaxPktLenErr) | ERR_MASK(SendMinPktLenErr) | \ + ERR_MASK(SendPktLenErr)) + +/* + * these are errors that can occur when the link changes state while + * a packet is being sent or received. This doesn't cover things + * like EBP or VCRC that can be the result of a sending having the + * link change state, so we receive a "known bad" packet. + */ +#define E_SUM_LINK_PKTERRS \ + (ERR_MASK(SendDroppedDataPktErr) | \ + ERR_MASK(SendDroppedSmpPktErr) | \ + ERR_MASK(SendMinPktLenErr) | ERR_MASK(SendPktLenErr) | \ + ERR_MASK(RcvShortPktLenErr) | ERR_MASK(RcvMinPktLenErr) | \ + ERR_MASK(RcvUnexpectedCharErr)) + +static void qib_6120_put_tid_2(struct qib_devdata *, u64 __iomem *, + u32, unsigned long); + +/* + * On platforms using this chip, and not having ordered WC stores, we + * can get TXE parity errors due to speculative reads to the PIO buffers, + * and this, due to a chip issue can result in (many) false parity error + * reports. So it's a debug print on those, and an info print on systems + * where the speculative reads don't occur. + */ +static void qib_6120_txe_recover(struct qib_devdata *dd) +{ + if (!qib_unordered_wc()) + qib_devinfo(dd->pcidev, + "Recovering from TXE PIO parity error\n"); +} + +/* enable/disable chip from delivering interrupts */ +static void qib_6120_set_intr_state(struct qib_devdata *dd, u32 enable) +{ + if (enable) { + if (dd->flags & QIB_BADINTR) + return; + qib_write_kreg(dd, kr_intmask, ~0ULL); + /* force re-interrupt of any pending interrupts. */ + qib_write_kreg(dd, kr_intclear, 0ULL); + } else + qib_write_kreg(dd, kr_intmask, 0ULL); +} + +/* + * Try to cleanup as much as possible for anything that might have gone + * wrong while in freeze mode, such as pio buffers being written by user + * processes (causing armlaunch), send errors due to going into freeze mode, + * etc., and try to avoid causing extra interrupts while doing so. + * Forcibly update the in-memory pioavail register copies after cleanup + * because the chip won't do it while in freeze mode (the register values + * themselves are kept correct). + * Make sure that we don't lose any important interrupts by using the chip + * feature that says that writing 0 to a bit in *clear that is set in + * *status will cause an interrupt to be generated again (if allowed by + * the *mask value). + * This is in chip-specific code because of all of the register accesses, + * even though the details are similar on most chips + */ +static void qib_6120_clear_freeze(struct qib_devdata *dd) +{ + /* disable error interrupts, to avoid confusion */ + qib_write_kreg(dd, kr_errmask, 0ULL); + + /* also disable interrupts; errormask is sometimes overwritten */ + qib_6120_set_intr_state(dd, 0); + + qib_cancel_sends(dd->pport); + + /* clear the freeze, and be sure chip saw it */ + qib_write_kreg(dd, kr_control, dd->control); + qib_read_kreg32(dd, kr_scratch); + + /* force in-memory update now we are out of freeze */ + qib_force_pio_avail_update(dd); + + /* + * force new interrupt if any hwerr, error or interrupt bits are + * still set, and clear "safe" send packet errors related to freeze + * and cancelling sends. Re-enable error interrupts before possible + * force of re-interrupt on pending interrupts. + */ + qib_write_kreg(dd, kr_hwerrclear, 0ULL); + qib_write_kreg(dd, kr_errclear, E_SPKT_ERRS_IGNORE); + qib_write_kreg(dd, kr_errmask, dd->cspec->errormask); + qib_6120_set_intr_state(dd, 1); +} + +/** + * qib_handle_6120_hwerrors - display hardware errors. + * @dd: the qlogic_ib device + * @msg: the output buffer + * @msgl: the size of the output buffer + * + * Use same msg buffer as regular errors to avoid excessive stack + * use. Most hardware errors are catastrophic, but for right now, + * we'll print them and continue. Reuse the same message buffer as + * handle_6120_errors() to avoid excessive stack usage. + */ +static void qib_handle_6120_hwerrors(struct qib_devdata *dd, char *msg, + size_t msgl) +{ + u64 hwerrs; + u32 bits, ctrl; + int isfatal = 0; + char *bitsmsg; + + hwerrs = qib_read_kreg64(dd, kr_hwerrstatus); + if (!hwerrs) + return; + if (hwerrs == ~0ULL) { + qib_dev_err(dd, + "Read of hardware error status failed (all bits set); ignoring\n"); + return; + } + qib_stats.sps_hwerrs++; + + /* Always clear the error status register, except MEMBISTFAIL, + * regardless of whether we continue or stop using the chip. + * We want that set so we know it failed, even across driver reload. + * We'll still ignore it in the hwerrmask. We do this partly for + * diagnostics, but also for support */ + qib_write_kreg(dd, kr_hwerrclear, + hwerrs & ~HWE_MASK(PowerOnBISTFailed)); + + hwerrs &= dd->cspec->hwerrmask; + + /* + * Make sure we get this much out, unless told to be quiet, + * or it's occurred within the last 5 seconds. + */ + if (hwerrs & ~(TXE_PIO_PARITY | RXEMEMPARITYERR_EAGERTID)) + qib_devinfo(dd->pcidev, + "Hardware error: hwerr=0x%llx (cleared)\n", + (unsigned long long) hwerrs); + + if (hwerrs & ~IB_HWE_BITSEXTANT) + qib_dev_err(dd, + "hwerror interrupt with unknown errors %llx set\n", + (unsigned long long)(hwerrs & ~IB_HWE_BITSEXTANT)); + + ctrl = qib_read_kreg32(dd, kr_control); + if ((ctrl & QLOGIC_IB_C_FREEZEMODE) && !dd->diag_client) { + /* + * Parity errors in send memory are recoverable, + * just cancel the send (if indicated in * sendbuffererror), + * count the occurrence, unfreeze (if no other handled + * hardware error bits are set), and continue. They can + * occur if a processor speculative read is done to the PIO + * buffer while we are sending a packet, for example. + */ + if (hwerrs & TXE_PIO_PARITY) { + qib_6120_txe_recover(dd); + hwerrs &= ~TXE_PIO_PARITY; + } + + if (!hwerrs) { + static u32 freeze_cnt; + + freeze_cnt++; + qib_6120_clear_freeze(dd); + } else + isfatal = 1; + } + + *msg = '\0'; + + if (hwerrs & HWE_MASK(PowerOnBISTFailed)) { + isfatal = 1; + strlcat(msg, + "[Memory BIST test failed, InfiniPath hardware unusable]", + msgl); + /* ignore from now on, so disable until driver reloaded */ + dd->cspec->hwerrmask &= ~HWE_MASK(PowerOnBISTFailed); + qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); + } + + qib_format_hwerrors(hwerrs, qib_6120_hwerror_msgs, + ARRAY_SIZE(qib_6120_hwerror_msgs), msg, msgl); + + bitsmsg = dd->cspec->bitsmsgbuf; + if (hwerrs & (QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK << + QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT)) { + bits = (u32) ((hwerrs >> + QLOGIC_IB_HWE_PCIEMEMPARITYERR_SHIFT) & + QLOGIC_IB_HWE_PCIEMEMPARITYERR_MASK); + snprintf(bitsmsg, sizeof(dd->cspec->bitsmsgbuf), + "[PCIe Mem Parity Errs %x] ", bits); + strlcat(msg, bitsmsg, msgl); + } + + if (hwerrs & _QIB_PLL_FAIL) { + isfatal = 1; + snprintf(bitsmsg, sizeof(dd->cspec->bitsmsgbuf), + "[PLL failed (%llx), InfiniPath hardware unusable]", + (unsigned long long) hwerrs & _QIB_PLL_FAIL); + strlcat(msg, bitsmsg, msgl); + /* ignore from now on, so disable until driver reloaded */ + dd->cspec->hwerrmask &= ~(hwerrs & _QIB_PLL_FAIL); + qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); + } + + if (hwerrs & QLOGIC_IB_HWE_SERDESPLLFAILED) { + /* + * If it occurs, it is left masked since the external + * interface is unused + */ + dd->cspec->hwerrmask &= ~QLOGIC_IB_HWE_SERDESPLLFAILED; + qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); + } + + if (hwerrs) + /* + * if any set that we aren't ignoring; only + * make the complaint once, in case it's stuck + * or recurring, and we get here multiple + * times. + */ + qib_dev_err(dd, "%s hardware error\n", msg); + else + *msg = 0; /* recovered from all of them */ + + if (isfatal && !dd->diag_client) { + qib_dev_err(dd, + "Fatal Hardware Error, no longer usable, SN %.16s\n", + dd->serial); + /* + * for /sys status file and user programs to print; if no + * trailing brace is copied, we'll know it was truncated. + */ + if (dd->freezemsg) + snprintf(dd->freezemsg, dd->freezelen, + "{%s}", msg); + qib_disable_after_error(dd); + } +} + +/* + * Decode the error status into strings, deciding whether to always + * print * it or not depending on "normal packet errors" vs everything + * else. Return 1 if "real" errors, otherwise 0 if only packet + * errors, so caller can decide what to print with the string. + */ +static int qib_decode_6120_err(struct qib_devdata *dd, char *buf, size_t blen, + u64 err) +{ + int iserr = 1; + + *buf = '\0'; + if (err & QLOGIC_IB_E_PKTERRS) { + if (!(err & ~QLOGIC_IB_E_PKTERRS)) + iserr = 0; + if ((err & ERR_MASK(RcvICRCErr)) && + !(err&(ERR_MASK(RcvVCRCErr)|ERR_MASK(RcvEBPErr)))) + strlcat(buf, "CRC ", blen); + if (!iserr) + goto done; + } + if (err & ERR_MASK(RcvHdrLenErr)) + strlcat(buf, "rhdrlen ", blen); + if (err & ERR_MASK(RcvBadTidErr)) + strlcat(buf, "rbadtid ", blen); + if (err & ERR_MASK(RcvBadVersionErr)) + strlcat(buf, "rbadversion ", blen); + if (err & ERR_MASK(RcvHdrErr)) + strlcat(buf, "rhdr ", blen); + if (err & ERR_MASK(RcvLongPktLenErr)) + strlcat(buf, "rlongpktlen ", blen); + if (err & ERR_MASK(RcvMaxPktLenErr)) + strlcat(buf, "rmaxpktlen ", blen); + if (err & ERR_MASK(RcvMinPktLenErr)) + strlcat(buf, "rminpktlen ", blen); + if (err & ERR_MASK(SendMinPktLenErr)) + strlcat(buf, "sminpktlen ", blen); + if (err & ERR_MASK(RcvFormatErr)) + strlcat(buf, "rformaterr ", blen); + if (err & ERR_MASK(RcvUnsupportedVLErr)) + strlcat(buf, "runsupvl ", blen); + if (err & ERR_MASK(RcvUnexpectedCharErr)) + strlcat(buf, "runexpchar ", blen); + if (err & ERR_MASK(RcvIBFlowErr)) + strlcat(buf, "ribflow ", blen); + if (err & ERR_MASK(SendUnderRunErr)) + strlcat(buf, "sunderrun ", blen); + if (err & ERR_MASK(SendPioArmLaunchErr)) + strlcat(buf, "spioarmlaunch ", blen); + if (err & ERR_MASK(SendUnexpectedPktNumErr)) + strlcat(buf, "sunexperrpktnum ", blen); + if (err & ERR_MASK(SendDroppedSmpPktErr)) + strlcat(buf, "sdroppedsmppkt ", blen); + if (err & ERR_MASK(SendMaxPktLenErr)) + strlcat(buf, "smaxpktlen ", blen); + if (err & ERR_MASK(SendUnsupportedVLErr)) + strlcat(buf, "sunsupVL ", blen); + if (err & ERR_MASK(InvalidAddrErr)) + strlcat(buf, "invalidaddr ", blen); + if (err & ERR_MASK(RcvEgrFullErr)) + strlcat(buf, "rcvegrfull ", blen); + if (err & ERR_MASK(RcvHdrFullErr)) + strlcat(buf, "rcvhdrfull ", blen); + if (err & ERR_MASK(IBStatusChanged)) + strlcat(buf, "ibcstatuschg ", blen); + if (err & ERR_MASK(RcvIBLostLinkErr)) + strlcat(buf, "riblostlink ", blen); + if (err & ERR_MASK(HardwareErr)) + strlcat(buf, "hardware ", blen); + if (err & ERR_MASK(ResetNegated)) + strlcat(buf, "reset ", blen); +done: + return iserr; +} + +/* + * Called when we might have an error that is specific to a particular + * PIO buffer, and may need to cancel that buffer, so it can be re-used. + */ +static void qib_disarm_6120_senderrbufs(struct qib_pportdata *ppd) +{ + unsigned long sbuf[2]; + struct qib_devdata *dd = ppd->dd; + + /* + * It's possible that sendbuffererror could have bits set; might + * have already done this as a result of hardware error handling. + */ + sbuf[0] = qib_read_kreg64(dd, kr_sendbuffererror); + sbuf[1] = qib_read_kreg64(dd, kr_sendbuffererror + 1); + + if (sbuf[0] || sbuf[1]) + qib_disarm_piobufs_set(dd, sbuf, + dd->piobcnt2k + dd->piobcnt4k); +} + +static int chk_6120_linkrecovery(struct qib_devdata *dd, u64 ibcs) +{ + int ret = 1; + u32 ibstate = qib_6120_iblink_state(ibcs); + u32 linkrecov = read_6120_creg32(dd, cr_iblinkerrrecov); + + if (linkrecov != dd->cspec->lastlinkrecov) { + /* and no more until active again */ + dd->cspec->lastlinkrecov = 0; + qib_set_linkstate(dd->pport, QIB_IB_LINKDOWN); + ret = 0; + } + if (ibstate == IB_PORT_ACTIVE) + dd->cspec->lastlinkrecov = + read_6120_creg32(dd, cr_iblinkerrrecov); + return ret; +} + +static void handle_6120_errors(struct qib_devdata *dd, u64 errs) +{ + char *msg; + u64 ignore_this_time = 0; + u64 iserr = 0; + struct qib_pportdata *ppd = dd->pport; + u64 mask; + + /* don't report errors that are masked */ + errs &= dd->cspec->errormask; + msg = dd->cspec->emsgbuf; + + /* do these first, they are most important */ + if (errs & ERR_MASK(HardwareErr)) + qib_handle_6120_hwerrors(dd, msg, sizeof(dd->cspec->emsgbuf)); + + if (errs & ~IB_E_BITSEXTANT) + qib_dev_err(dd, + "error interrupt with unknown errors %llx set\n", + (unsigned long long) (errs & ~IB_E_BITSEXTANT)); + + if (errs & E_SUM_ERRS) { + qib_disarm_6120_senderrbufs(ppd); + if ((errs & E_SUM_LINK_PKTERRS) && + !(ppd->lflags & QIBL_LINKACTIVE)) { + /* + * This can happen when trying to bring the link + * up, but the IB link changes state at the "wrong" + * time. The IB logic then complains that the packet + * isn't valid. We don't want to confuse people, so + * we just don't print them, except at debug + */ + ignore_this_time = errs & E_SUM_LINK_PKTERRS; + } + } else if ((errs & E_SUM_LINK_PKTERRS) && + !(ppd->lflags & QIBL_LINKACTIVE)) { + /* + * This can happen when SMA is trying to bring the link + * up, but the IB link changes state at the "wrong" time. + * The IB logic then complains that the packet isn't + * valid. We don't want to confuse people, so we just + * don't print them, except at debug + */ + ignore_this_time = errs & E_SUM_LINK_PKTERRS; + } + + qib_write_kreg(dd, kr_errclear, errs); + + errs &= ~ignore_this_time; + if (!errs) + goto done; + + /* + * The ones we mask off are handled specially below + * or above. + */ + mask = ERR_MASK(IBStatusChanged) | ERR_MASK(RcvEgrFullErr) | + ERR_MASK(RcvHdrFullErr) | ERR_MASK(HardwareErr); + qib_decode_6120_err(dd, msg, sizeof(dd->cspec->emsgbuf), errs & ~mask); + + if (errs & E_SUM_PKTERRS) + qib_stats.sps_rcverrs++; + if (errs & E_SUM_ERRS) + qib_stats.sps_txerrs++; + + iserr = errs & ~(E_SUM_PKTERRS | QLOGIC_IB_E_PKTERRS); + + if (errs & ERR_MASK(IBStatusChanged)) { + u64 ibcs = qib_read_kreg64(dd, kr_ibcstatus); + u32 ibstate = qib_6120_iblink_state(ibcs); + int handle = 1; + + if (ibstate != IB_PORT_INIT && dd->cspec->lastlinkrecov) + handle = chk_6120_linkrecovery(dd, ibcs); + /* + * Since going into a recovery state causes the link state + * to go down and since recovery is transitory, it is better + * if we "miss" ever seeing the link training state go into + * recovery (i.e., ignore this transition for link state + * special handling purposes) without updating lastibcstat. + */ + if (handle && qib_6120_phys_portstate(ibcs) == + IB_PHYSPORTSTATE_LINK_ERR_RECOVER) + handle = 0; + if (handle) + qib_handle_e_ibstatuschanged(ppd, ibcs); + } + + if (errs & ERR_MASK(ResetNegated)) { + qib_dev_err(dd, + "Got reset, requires re-init (unload and reload driver)\n"); + dd->flags &= ~QIB_INITTED; /* needs re-init */ + /* mark as having had error */ + *dd->devstatusp |= QIB_STATUS_HWERROR; + *dd->pport->statusp &= ~QIB_STATUS_IB_CONF; + } + + if (*msg && iserr) + qib_dev_porterr(dd, ppd->port, "%s error\n", msg); + + if (ppd->state_wanted & ppd->lflags) + wake_up_interruptible(&ppd->state_wait); + + /* + * If there were hdrq or egrfull errors, wake up any processes + * waiting in poll. We used to try to check which contexts had + * the overflow, but given the cost of that and the chip reads + * to support it, it's better to just wake everybody up if we + * get an overflow; waiters can poll again if it's not them. + */ + if (errs & (ERR_MASK(RcvEgrFullErr) | ERR_MASK(RcvHdrFullErr))) { + qib_handle_urcv(dd, ~0U); + if (errs & ERR_MASK(RcvEgrFullErr)) + qib_stats.sps_buffull++; + else + qib_stats.sps_hdrfull++; + } +done: + return; +} + +/** + * qib_6120_init_hwerrors - enable hardware errors + * @dd: the qlogic_ib device + * + * now that we have finished initializing everything that might reasonably + * cause a hardware error, and cleared those errors bits as they occur, + * we can enable hardware errors in the mask (potentially enabling + * freeze mode), and enable hardware errors as errors (along with + * everything else) in errormask + */ +static void qib_6120_init_hwerrors(struct qib_devdata *dd) +{ + u64 val; + u64 extsval; + + extsval = qib_read_kreg64(dd, kr_extstatus); + + if (!(extsval & QLOGIC_IB_EXTS_MEMBIST_ENDTEST)) + qib_dev_err(dd, "MemBIST did not complete!\n"); + + /* init so all hwerrors interrupt, and enter freeze, ajdust below */ + val = ~0ULL; + if (dd->minrev < 2) { + /* + * Avoid problem with internal interface bus parity + * checking. Fixed in Rev2. + */ + val &= ~QLOGIC_IB_HWE_PCIEBUSPARITYRADM; + } + /* avoid some intel cpu's speculative read freeze mode issue */ + val &= ~TXEMEMPARITYERR_PIOBUF; + + dd->cspec->hwerrmask = val; + + qib_write_kreg(dd, kr_hwerrclear, ~HWE_MASK(PowerOnBISTFailed)); + qib_write_kreg(dd, kr_hwerrmask, dd->cspec->hwerrmask); + + /* clear all */ + qib_write_kreg(dd, kr_errclear, ~0ULL); + /* enable errors that are masked, at least this first time. */ + qib_write_kreg(dd, kr_errmask, ~0ULL); + dd->cspec->errormask = qib_read_kreg64(dd, kr_errmask); + /* clear any interrupts up to this point (ints still not enabled) */ + qib_write_kreg(dd, kr_intclear, ~0ULL); + + qib_write_kreg(dd, kr_rcvbthqp, + dd->qpn_mask << (QIB_6120_RcvBTHQP_BTHQP_Mask_LSB - 1) | + QIB_KD_QP); +} + +/* + * Disable and enable the armlaunch error. Used for PIO bandwidth testing + * on chips that are count-based, rather than trigger-based. There is no + * reference counting, but that's also fine, given the intended use. + * Only chip-specific because it's all register accesses + */ +static void qib_set_6120_armlaunch(struct qib_devdata *dd, u32 enable) +{ + if (enable) { + qib_write_kreg(dd, kr_errclear, + ERR_MASK(SendPioArmLaunchErr)); + dd->cspec->errormask |= ERR_MASK(SendPioArmLaunchErr); + } else + dd->cspec->errormask &= ~ERR_MASK(SendPioArmLaunchErr); + qib_write_kreg(dd, kr_errmask, dd->cspec->errormask); +} + +/* + * Formerly took parameter <which> in pre-shifted, + * pre-merged form with LinkCmd and LinkInitCmd + * together, and assuming the zero was NOP. + */ +static void qib_set_ib_6120_lstate(struct qib_pportdata *ppd, u16 linkcmd, + u16 linitcmd) +{ + u64 mod_wd; + struct qib_devdata *dd = ppd->dd; + unsigned long flags; + + if (linitcmd == QLOGIC_IB_IBCC_LINKINITCMD_DISABLE) { + /* + * If we are told to disable, note that so link-recovery + * code does not attempt to bring us back up. + */ + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags |= QIBL_IB_LINK_DISABLED; + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + } else if (linitcmd || linkcmd == QLOGIC_IB_IBCC_LINKCMD_DOWN) { + /* + * Any other linkinitcmd will lead to LINKDOWN and then + * to INIT (if all is well), so clear flag to let + * link-recovery code attempt to bring us back up. + */ + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags &= ~QIBL_IB_LINK_DISABLED; + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + } + + mod_wd = (linkcmd << QLOGIC_IB_IBCC_LINKCMD_SHIFT) | + (linitcmd << QLOGIC_IB_IBCC_LINKINITCMD_SHIFT); + + qib_write_kreg(dd, kr_ibcctrl, dd->cspec->ibcctrl | mod_wd); + /* write to chip to prevent back-to-back writes of control reg */ + qib_write_kreg(dd, kr_scratch, 0); +} + +/** + * qib_6120_bringup_serdes - bring up the serdes + * @dd: the qlogic_ib device + */ +static int qib_6120_bringup_serdes(struct qib_pportdata *ppd) +{ + struct qib_devdata *dd = ppd->dd; + u64 val, config1, prev_val, hwstat, ibc; + + /* Put IBC in reset, sends disabled */ + dd->control &= ~QLOGIC_IB_C_LINKENABLE; + qib_write_kreg(dd, kr_control, 0ULL); + + dd->cspec->ibdeltainprog = 1; + dd->cspec->ibsymsnap = read_6120_creg32(dd, cr_ibsymbolerr); + dd->cspec->iblnkerrsnap = read_6120_creg32(dd, cr_iblinkerrrecov); + + /* flowcontrolwatermark is in units of KBytes */ + ibc = 0x5ULL << SYM_LSB(IBCCtrl, FlowCtrlWaterMark); + /* + * How often flowctrl sent. More or less in usecs; balance against + * watermark value, so that in theory senders always get a flow + * control update in time to not let the IB link go idle. + */ + ibc |= 0x3ULL << SYM_LSB(IBCCtrl, FlowCtrlPeriod); + /* max error tolerance */ + dd->cspec->lli_thresh = 0xf; + ibc |= (u64) dd->cspec->lli_thresh << SYM_LSB(IBCCtrl, PhyerrThreshold); + /* use "real" buffer space for */ + ibc |= 4ULL << SYM_LSB(IBCCtrl, CreditScale); + /* IB credit flow control. */ + ibc |= 0xfULL << SYM_LSB(IBCCtrl, OverrunThreshold); + /* + * set initial max size pkt IBC will send, including ICRC; it's the + * PIO buffer size in dwords, less 1; also see qib_set_mtu() + */ + ibc |= ((u64)(ppd->ibmaxlen >> 2) + 1) << SYM_LSB(IBCCtrl, MaxPktLen); + dd->cspec->ibcctrl = ibc; /* without linkcmd or linkinitcmd! */ + + /* initially come up waiting for TS1, without sending anything. */ + val = dd->cspec->ibcctrl | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE << + QLOGIC_IB_IBCC_LINKINITCMD_SHIFT); + qib_write_kreg(dd, kr_ibcctrl, val); + + val = qib_read_kreg64(dd, kr_serdes_cfg0); + config1 = qib_read_kreg64(dd, kr_serdes_cfg1); + + /* + * Force reset on, also set rxdetect enable. Must do before reading + * serdesstatus at least for simulation, or some of the bits in + * serdes status will come back as undefined and cause simulation + * failures + */ + val |= SYM_MASK(SerdesCfg0, ResetPLL) | + SYM_MASK(SerdesCfg0, RxDetEnX) | + (SYM_MASK(SerdesCfg0, L1PwrDnA) | + SYM_MASK(SerdesCfg0, L1PwrDnB) | + SYM_MASK(SerdesCfg0, L1PwrDnC) | + SYM_MASK(SerdesCfg0, L1PwrDnD)); + qib_write_kreg(dd, kr_serdes_cfg0, val); + /* be sure chip saw it */ + qib_read_kreg64(dd, kr_scratch); + udelay(5); /* need pll reset set at least for a bit */ + /* + * after PLL is reset, set the per-lane Resets and TxIdle and + * clear the PLL reset and rxdetect (to get falling edge). + * Leave L1PWR bits set (permanently) + */ + val &= ~(SYM_MASK(SerdesCfg0, RxDetEnX) | + SYM_MASK(SerdesCfg0, ResetPLL) | + (SYM_MASK(SerdesCfg0, L1PwrDnA) | + SYM_MASK(SerdesCfg0, L1PwrDnB) | + SYM_MASK(SerdesCfg0, L1PwrDnC) | + SYM_MASK(SerdesCfg0, L1PwrDnD))); + val |= (SYM_MASK(SerdesCfg0, ResetA) | + SYM_MASK(SerdesCfg0, ResetB) | + SYM_MASK(SerdesCfg0, ResetC) | + SYM_MASK(SerdesCfg0, ResetD)) | + SYM_MASK(SerdesCfg0, TxIdeEnX); + qib_write_kreg(dd, kr_serdes_cfg0, val); + /* be sure chip saw it */ + (void) qib_read_kreg64(dd, kr_scratch); + /* need PLL reset clear for at least 11 usec before lane + * resets cleared; give it a few more to be sure */ + udelay(15); + val &= ~((SYM_MASK(SerdesCfg0, ResetA) | + SYM_MASK(SerdesCfg0, ResetB) | + SYM_MASK(SerdesCfg0, ResetC) | + SYM_MASK(SerdesCfg0, ResetD)) | + SYM_MASK(SerdesCfg0, TxIdeEnX)); + + qib_write_kreg(dd, kr_serdes_cfg0, val); + /* be sure chip saw it */ + (void) qib_read_kreg64(dd, kr_scratch); + + val = qib_read_kreg64(dd, kr_xgxs_cfg); + prev_val = val; + if (val & QLOGIC_IB_XGXS_RESET) + val &= ~QLOGIC_IB_XGXS_RESET; + if (SYM_FIELD(val, XGXSCfg, polarity_inv) != ppd->rx_pol_inv) { + /* need to compensate for Tx inversion in partner */ + val &= ~SYM_MASK(XGXSCfg, polarity_inv); + val |= (u64)ppd->rx_pol_inv << SYM_LSB(XGXSCfg, polarity_inv); + } + if (val != prev_val) + qib_write_kreg(dd, kr_xgxs_cfg, val); + + val = qib_read_kreg64(dd, kr_serdes_cfg0); + + /* clear current and de-emphasis bits */ + config1 &= ~0x0ffffffff00ULL; + /* set current to 20ma */ + config1 |= 0x00000000000ULL; + /* set de-emphasis to -5.68dB */ + config1 |= 0x0cccc000000ULL; + qib_write_kreg(dd, kr_serdes_cfg1, config1); + + /* base and port guid same for single port */ + ppd->guid = dd->base_guid; + + /* + * the process of setting and un-resetting the serdes normally + * causes a serdes PLL error, so check for that and clear it + * here. Also clearr hwerr bit in errstatus, but not others. + */ + hwstat = qib_read_kreg64(dd, kr_hwerrstatus); + if (hwstat) { + /* should just have PLL, clear all set, in an case */ + qib_write_kreg(dd, kr_hwerrclear, hwstat); + qib_write_kreg(dd, kr_errclear, ERR_MASK(HardwareErr)); + } + + dd->control |= QLOGIC_IB_C_LINKENABLE; + dd->control &= ~QLOGIC_IB_C_FREEZEMODE; + qib_write_kreg(dd, kr_control, dd->control); + + return 0; +} + +/** + * qib_6120_quiet_serdes - set serdes to txidle + * @ppd: physical port of the qlogic_ib device + * Called when driver is being unloaded + */ +static void qib_6120_quiet_serdes(struct qib_pportdata *ppd) +{ + struct qib_devdata *dd = ppd->dd; + u64 val; + + qib_set_ib_6120_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); + + /* disable IBC */ + dd->control &= ~QLOGIC_IB_C_LINKENABLE; + qib_write_kreg(dd, kr_control, + dd->control | QLOGIC_IB_C_FREEZEMODE); + + if (dd->cspec->ibsymdelta || dd->cspec->iblnkerrdelta || + dd->cspec->ibdeltainprog) { + u64 diagc; + + /* enable counter writes */ + diagc = qib_read_kreg64(dd, kr_hwdiagctrl); + qib_write_kreg(dd, kr_hwdiagctrl, + diagc | SYM_MASK(HwDiagCtrl, CounterWrEnable)); + + if (dd->cspec->ibsymdelta || dd->cspec->ibdeltainprog) { + val = read_6120_creg32(dd, cr_ibsymbolerr); + if (dd->cspec->ibdeltainprog) + val -= val - dd->cspec->ibsymsnap; + val -= dd->cspec->ibsymdelta; + write_6120_creg(dd, cr_ibsymbolerr, val); + } + if (dd->cspec->iblnkerrdelta || dd->cspec->ibdeltainprog) { + val = read_6120_creg32(dd, cr_iblinkerrrecov); + if (dd->cspec->ibdeltainprog) + val -= val - dd->cspec->iblnkerrsnap; + val -= dd->cspec->iblnkerrdelta; + write_6120_creg(dd, cr_iblinkerrrecov, val); + } + + /* and disable counter writes */ + qib_write_kreg(dd, kr_hwdiagctrl, diagc); + } + + val = qib_read_kreg64(dd, kr_serdes_cfg0); + val |= SYM_MASK(SerdesCfg0, TxIdeEnX); + qib_write_kreg(dd, kr_serdes_cfg0, val); +} + +/** + * qib_6120_setup_setextled - set the state of the two external LEDs + * @dd: the qlogic_ib device + * @on: whether the link is up or not + * + * The exact combo of LEDs if on is true is determined by looking + * at the ibcstatus. + * These LEDs indicate the physical and logical state of IB link. + * For this chip (at least with recommended board pinouts), LED1 + * is Yellow (logical state) and LED2 is Green (physical state), + * + * Note: We try to match the Mellanox HCA LED behavior as best + * we can. Green indicates physical link state is OK (something is + * plugged in, and we can train). + * Amber indicates the link is logically up (ACTIVE). + * Mellanox further blinks the amber LED to indicate data packet + * activity, but we have no hardware support for that, so it would + * require waking up every 10-20 msecs and checking the counters + * on the chip, and then turning the LED off if appropriate. That's + * visible overhead, so not something we will do. + * + */ +static void qib_6120_setup_setextled(struct qib_pportdata *ppd, u32 on) +{ + u64 extctl, val, lst, ltst; + unsigned long flags; + struct qib_devdata *dd = ppd->dd; + + /* + * The diags use the LED to indicate diag info, so we leave + * the external LED alone when the diags are running. + */ + if (dd->diag_client) + return; + + /* Allow override of LED display for, e.g. Locating system in rack */ + if (ppd->led_override) { + ltst = (ppd->led_override & QIB_LED_PHYS) ? + IB_PHYSPORTSTATE_LINKUP : IB_PHYSPORTSTATE_DISABLED, + lst = (ppd->led_override & QIB_LED_LOG) ? + IB_PORT_ACTIVE : IB_PORT_DOWN; + } else if (on) { + val = qib_read_kreg64(dd, kr_ibcstatus); + ltst = qib_6120_phys_portstate(val); + lst = qib_6120_iblink_state(val); + } else { + ltst = 0; + lst = 0; + } + + spin_lock_irqsave(&dd->cspec->gpio_lock, flags); + extctl = dd->cspec->extctrl & ~(SYM_MASK(EXTCtrl, LEDPriPortGreenOn) | + SYM_MASK(EXTCtrl, LEDPriPortYellowOn)); + + if (ltst == IB_PHYSPORTSTATE_LINKUP) + extctl |= SYM_MASK(EXTCtrl, LEDPriPortYellowOn); + if (lst == IB_PORT_ACTIVE) + extctl |= SYM_MASK(EXTCtrl, LEDPriPortGreenOn); + dd->cspec->extctrl = extctl; + qib_write_kreg(dd, kr_extctrl, extctl); + spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); +} + +/** + * qib_6120_setup_cleanup - clean up any per-chip chip-specific stuff + * @dd: the qlogic_ib device + * + * This is called during driver unload. +*/ +static void qib_6120_setup_cleanup(struct qib_devdata *dd) +{ + qib_free_irq(dd); + kfree(dd->cspec->cntrs); + kfree(dd->cspec->portcntrs); + if (dd->cspec->dummy_hdrq) { + dma_free_coherent(&dd->pcidev->dev, + ALIGN(dd->rcvhdrcnt * + dd->rcvhdrentsize * + sizeof(u32), PAGE_SIZE), + dd->cspec->dummy_hdrq, + dd->cspec->dummy_hdrq_phys); + dd->cspec->dummy_hdrq = NULL; + } +} + +static void qib_wantpiobuf_6120_intr(struct qib_devdata *dd, u32 needint) +{ + unsigned long flags; + + spin_lock_irqsave(&dd->sendctrl_lock, flags); + if (needint) + dd->sendctrl |= SYM_MASK(SendCtrl, PIOIntBufAvail); + else + dd->sendctrl &= ~SYM_MASK(SendCtrl, PIOIntBufAvail); + qib_write_kreg(dd, kr_sendctrl, dd->sendctrl); + qib_write_kreg(dd, kr_scratch, 0ULL); + spin_unlock_irqrestore(&dd->sendctrl_lock, flags); +} + +/* + * handle errors and unusual events first, separate function + * to improve cache hits for fast path interrupt handling + */ +static noinline void unlikely_6120_intr(struct qib_devdata *dd, u64 istat) +{ + if (unlikely(istat & ~QLOGIC_IB_I_BITSEXTANT)) + qib_dev_err(dd, "interrupt with unknown interrupts %Lx set\n", + istat & ~QLOGIC_IB_I_BITSEXTANT); + + if (istat & QLOGIC_IB_I_ERROR) { + u64 estat = 0; + + qib_stats.sps_errints++; + estat = qib_read_kreg64(dd, kr_errstatus); + if (!estat) + qib_devinfo(dd->pcidev, + "error interrupt (%Lx), but no error bits set!\n", + istat); + handle_6120_errors(dd, estat); + } + + if (istat & QLOGIC_IB_I_GPIO) { + u32 gpiostatus; + u32 to_clear = 0; + + /* + * GPIO_3..5 on IBA6120 Rev2 chips indicate + * errors that we need to count. + */ + gpiostatus = qib_read_kreg32(dd, kr_gpio_status); + /* First the error-counter case. */ + if (gpiostatus & GPIO_ERRINTR_MASK) { + /* want to clear the bits we see asserted. */ + to_clear |= (gpiostatus & GPIO_ERRINTR_MASK); + + /* + * Count appropriately, clear bits out of our copy, + * as they have been "handled". + */ + if (gpiostatus & (1 << GPIO_RXUVL_BIT)) + dd->cspec->rxfc_unsupvl_errs++; + if (gpiostatus & (1 << GPIO_OVRUN_BIT)) + dd->cspec->overrun_thresh_errs++; + if (gpiostatus & (1 << GPIO_LLI_BIT)) + dd->cspec->lli_errs++; + gpiostatus &= ~GPIO_ERRINTR_MASK; + } + if (gpiostatus) { + /* + * Some unexpected bits remain. If they could have + * caused the interrupt, complain and clear. + * To avoid repetition of this condition, also clear + * the mask. It is almost certainly due to error. + */ + const u32 mask = qib_read_kreg32(dd, kr_gpio_mask); + + /* + * Also check that the chip reflects our shadow, + * and report issues, If they caused the interrupt. + * we will suppress by refreshing from the shadow. + */ + if (mask & gpiostatus) { + to_clear |= (gpiostatus & mask); + dd->cspec->gpio_mask &= ~(gpiostatus & mask); + qib_write_kreg(dd, kr_gpio_mask, + dd->cspec->gpio_mask); + } + } + if (to_clear) + qib_write_kreg(dd, kr_gpio_clear, (u64) to_clear); + } +} + +static irqreturn_t qib_6120intr(int irq, void *data) +{ + struct qib_devdata *dd = data; + irqreturn_t ret; + u32 istat, ctxtrbits, rmask, crcs = 0; + unsigned i; + + if ((dd->flags & (QIB_PRESENT | QIB_BADINTR)) != QIB_PRESENT) { + /* + * This return value is not great, but we do not want the + * interrupt core code to remove our interrupt handler + * because we don't appear to be handling an interrupt + * during a chip reset. + */ + ret = IRQ_HANDLED; + goto bail; + } + + istat = qib_read_kreg32(dd, kr_intstatus); + + if (unlikely(!istat)) { + ret = IRQ_NONE; /* not our interrupt, or already handled */ + goto bail; + } + if (unlikely(istat == -1)) { + qib_bad_intrstatus(dd); + /* don't know if it was our interrupt or not */ + ret = IRQ_NONE; + goto bail; + } + + this_cpu_inc(*dd->int_counter); + + if (unlikely(istat & (~QLOGIC_IB_I_BITSEXTANT | + QLOGIC_IB_I_GPIO | QLOGIC_IB_I_ERROR))) + unlikely_6120_intr(dd, istat); + + /* + * Clear the interrupt bits we found set, relatively early, so we + * "know" know the chip will have seen this by the time we process + * the queue, and will re-interrupt if necessary. The processor + * itself won't take the interrupt again until we return. + */ + qib_write_kreg(dd, kr_intclear, istat); + + /* + * Handle kernel receive queues before checking for pio buffers + * available since receives can overflow; piobuf waiters can afford + * a few extra cycles, since they were waiting anyway. + */ + ctxtrbits = istat & + ((QLOGIC_IB_I_RCVAVAIL_MASK << QLOGIC_IB_I_RCVAVAIL_SHIFT) | + (QLOGIC_IB_I_RCVURG_MASK << QLOGIC_IB_I_RCVURG_SHIFT)); + if (ctxtrbits) { + rmask = (1U << QLOGIC_IB_I_RCVAVAIL_SHIFT) | + (1U << QLOGIC_IB_I_RCVURG_SHIFT); + for (i = 0; i < dd->first_user_ctxt; i++) { + if (ctxtrbits & rmask) { + ctxtrbits &= ~rmask; + crcs += qib_kreceive(dd->rcd[i], + &dd->cspec->lli_counter, + NULL); + } + rmask <<= 1; + } + if (crcs) { + u32 cntr = dd->cspec->lli_counter; + + cntr += crcs; + if (cntr) { + if (cntr > dd->cspec->lli_thresh) { + dd->cspec->lli_counter = 0; + dd->cspec->lli_errs++; + } else + dd->cspec->lli_counter += cntr; + } + } + + + if (ctxtrbits) { + ctxtrbits = + (ctxtrbits >> QLOGIC_IB_I_RCVAVAIL_SHIFT) | + (ctxtrbits >> QLOGIC_IB_I_RCVURG_SHIFT); + qib_handle_urcv(dd, ctxtrbits); + } + } + + if ((istat & QLOGIC_IB_I_SPIOBUFAVAIL) && (dd->flags & QIB_INITTED)) + qib_ib_piobufavail(dd); + + ret = IRQ_HANDLED; +bail: + return ret; +} + +/* + * Set up our chip-specific interrupt handler + * The interrupt type has already been setup, so + * we just need to do the registration and error checking. + */ +static void qib_setup_6120_interrupt(struct qib_devdata *dd) +{ + int ret; + + /* + * If the chip supports added error indication via GPIO pins, + * enable interrupts on those bits so the interrupt routine + * can count the events. Also set flag so interrupt routine + * can know they are expected. + */ + if (SYM_FIELD(dd->revision, Revision_R, + ChipRevMinor) > 1) { + /* Rev2+ reports extra errors via internal GPIO pins */ + dd->cspec->gpio_mask |= GPIO_ERRINTR_MASK; + qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask); + } + + ret = pci_request_irq(dd->pcidev, 0, qib_6120intr, NULL, dd, + QIB_DRV_NAME); + if (ret) + qib_dev_err(dd, + "Couldn't setup interrupt (irq=%d): %d\n", + pci_irq_vector(dd->pcidev, 0), ret); +} + +/** + * pe_boardname - fill in the board name + * @dd: the qlogic_ib device + * + * info is based on the board revision register + */ +static void pe_boardname(struct qib_devdata *dd) +{ + u32 boardid; + + boardid = SYM_FIELD(dd->revision, Revision, + BoardID); + + switch (boardid) { + case 2: + dd->boardname = "InfiniPath_QLE7140"; + break; + default: + qib_dev_err(dd, "Unknown 6120 board with ID %u\n", boardid); + dd->boardname = "Unknown_InfiniPath_6120"; + break; + } + + if (dd->majrev != 4 || !dd->minrev || dd->minrev > 2) + qib_dev_err(dd, + "Unsupported InfiniPath hardware revision %u.%u!\n", + dd->majrev, dd->minrev); + + snprintf(dd->boardversion, sizeof(dd->boardversion), + "ChipABI %u.%u, %s, InfiniPath%u %u.%u, SW Compat %u\n", + QIB_CHIP_VERS_MAJ, QIB_CHIP_VERS_MIN, dd->boardname, + (unsigned int)SYM_FIELD(dd->revision, Revision_R, Arch), + dd->majrev, dd->minrev, + (unsigned int)SYM_FIELD(dd->revision, Revision_R, SW)); +} + +/* + * This routine sleeps, so it can only be called from user context, not + * from interrupt context. If we need interrupt context, we can split + * it into two routines. + */ +static int qib_6120_setup_reset(struct qib_devdata *dd) +{ + u64 val; + int i; + int ret; + u16 cmdval; + u8 int_line, clinesz; + + qib_pcie_getcmd(dd, &cmdval, &int_line, &clinesz); + + /* Use ERROR so it shows up in logs, etc. */ + qib_dev_err(dd, "Resetting InfiniPath unit %u\n", dd->unit); + + /* no interrupts till re-initted */ + qib_6120_set_intr_state(dd, 0); + + dd->cspec->ibdeltainprog = 0; + dd->cspec->ibsymdelta = 0; + dd->cspec->iblnkerrdelta = 0; + + /* + * Keep chip from being accessed until we are ready. Use + * writeq() directly, to allow the write even though QIB_PRESENT + * isn't set. + */ + dd->flags &= ~(QIB_INITTED | QIB_PRESENT); + /* so we check interrupts work again */ + dd->z_int_counter = qib_int_counter(dd); + val = dd->control | QLOGIC_IB_C_RESET; + writeq(val, &dd->kregbase[kr_control]); + mb(); /* prevent compiler re-ordering around actual reset */ + + for (i = 1; i <= 5; i++) { + /* + * Allow MBIST, etc. to complete; longer on each retry. + * We sometimes get machine checks from bus timeout if no + * response, so for now, make it *really* long. + */ + msleep(1000 + (1 + i) * 2000); + + qib_pcie_reenable(dd, cmdval, int_line, clinesz); + + /* + * Use readq directly, so we don't need to mark it as PRESENT + * until we get a successful indication that all is well. + */ + val = readq(&dd->kregbase[kr_revision]); + if (val == dd->revision) { + dd->flags |= QIB_PRESENT; /* it's back */ + ret = qib_reinit_intr(dd); + goto bail; + } + } + ret = 0; /* failed */ + +bail: + if (ret) { + if (qib_pcie_params(dd, dd->lbus_width, NULL)) + qib_dev_err(dd, + "Reset failed to setup PCIe or interrupts; continuing anyway\n"); + /* clear the reset error, init error/hwerror mask */ + qib_6120_init_hwerrors(dd); + /* for Rev2 error interrupts; nop for rev 1 */ + qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask); + /* clear the reset error, init error/hwerror mask */ + qib_6120_init_hwerrors(dd); + } + return ret; +} + +/** + * qib_6120_put_tid - write a TID in chip + * @dd: the qlogic_ib device + * @tidptr: pointer to the expected TID (in chip) to update + * @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) + * for expected + * @pa: physical address of in memory buffer; tidinvalid if freeing + * + * This exists as a separate routine to allow for special locking etc. + * It's used for both the full cleanup on exit, as well as the normal + * setup and teardown. + */ +static void qib_6120_put_tid(struct qib_devdata *dd, u64 __iomem *tidptr, + u32 type, unsigned long pa) +{ + u32 __iomem *tidp32 = (u32 __iomem *)tidptr; + unsigned long flags; + int tidx; + spinlock_t *tidlockp; /* select appropriate spinlock */ + + if (!dd->kregbase) + return; + + if (pa != dd->tidinvalid) { + if (pa & ((1U << 11) - 1)) { + qib_dev_err(dd, "Physaddr %lx not 2KB aligned!\n", + pa); + return; + } + pa >>= 11; + if (pa & ~QLOGIC_IB_RT_ADDR_MASK) { + qib_dev_err(dd, + "Physical page address 0x%lx larger than supported\n", + pa); + return; + } + + if (type == RCVHQ_RCV_TYPE_EAGER) + pa |= dd->tidtemplate; + else /* for now, always full 4KB page */ + pa |= 2 << 29; + } + + /* + * Avoid chip issue by writing the scratch register + * before and after the TID, and with an io write barrier. + * We use a spinlock around the writes, so they can't intermix + * with other TID (eager or expected) writes (the chip problem + * is triggered by back to back TID writes). Unfortunately, this + * call can be done from interrupt level for the ctxt 0 eager TIDs, + * so we have to use irqsave locks. + */ + /* + * Assumes tidptr always > egrtidbase + * if type == RCVHQ_RCV_TYPE_EAGER. + */ + tidx = tidptr - dd->egrtidbase; + + tidlockp = (type == RCVHQ_RCV_TYPE_EAGER && tidx < dd->rcvhdrcnt) + ? &dd->cspec->kernel_tid_lock : &dd->cspec->user_tid_lock; + spin_lock_irqsave(tidlockp, flags); + qib_write_kreg(dd, kr_scratch, 0xfeeddeaf); + writel(pa, tidp32); + qib_write_kreg(dd, kr_scratch, 0xdeadbeef); + spin_unlock_irqrestore(tidlockp, flags); +} + +/** + * qib_6120_put_tid_2 - write a TID in chip, Revision 2 or higher + * @dd: the qlogic_ib device + * @tidptr: pointer to the expected TID (in chip) to update + * @tidtype: RCVHQ_RCV_TYPE_EAGER (1) for eager, RCVHQ_RCV_TYPE_EXPECTED (0) + * for expected + * @pa: physical address of in memory buffer; tidinvalid if freeing + * + * This exists as a separate routine to allow for selection of the + * appropriate "flavor". The static calls in cleanup just use the + * revision-agnostic form, as they are not performance critical. + */ +static void qib_6120_put_tid_2(struct qib_devdata *dd, u64 __iomem *tidptr, + u32 type, unsigned long pa) +{ + u32 __iomem *tidp32 = (u32 __iomem *)tidptr; + + if (!dd->kregbase) + return; + + if (pa != dd->tidinvalid) { + if (pa & ((1U << 11) - 1)) { + qib_dev_err(dd, "Physaddr %lx not 2KB aligned!\n", + pa); + return; + } + pa >>= 11; + if (pa & ~QLOGIC_IB_RT_ADDR_MASK) { + qib_dev_err(dd, + "Physical page address 0x%lx larger than supported\n", + pa); + return; + } + + if (type == RCVHQ_RCV_TYPE_EAGER) + pa |= dd->tidtemplate; + else /* for now, always full 4KB page */ + pa |= 2 << 29; + } + writel(pa, tidp32); +} + + +/** + * qib_6120_clear_tids - clear all TID entries for a context, expected and eager + * @dd: the qlogic_ib device + * @ctxt: the context + * + * clear all TID entries for a context, expected and eager. + * Used from qib_close(). On this chip, TIDs are only 32 bits, + * not 64, but they are still on 64 bit boundaries, so tidbase + * is declared as u64 * for the pointer math, even though we write 32 bits + */ +static void qib_6120_clear_tids(struct qib_devdata *dd, + struct qib_ctxtdata *rcd) +{ + u64 __iomem *tidbase; + unsigned long tidinv; + u32 ctxt; + int i; + + if (!dd->kregbase || !rcd) + return; + + ctxt = rcd->ctxt; + + tidinv = dd->tidinvalid; + tidbase = (u64 __iomem *) + ((char __iomem *)(dd->kregbase) + + dd->rcvtidbase + + ctxt * dd->rcvtidcnt * sizeof(*tidbase)); + + for (i = 0; i < dd->rcvtidcnt; i++) + /* use func pointer because could be one of two funcs */ + dd->f_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EXPECTED, + tidinv); + + tidbase = (u64 __iomem *) + ((char __iomem *)(dd->kregbase) + + dd->rcvegrbase + + rcd->rcvegr_tid_base * sizeof(*tidbase)); + + for (i = 0; i < rcd->rcvegrcnt; i++) + /* use func pointer because could be one of two funcs */ + dd->f_put_tid(dd, &tidbase[i], RCVHQ_RCV_TYPE_EAGER, + tidinv); +} + +/** + * qib_6120_tidtemplate - setup constants for TID updates + * @dd: the qlogic_ib device + * + * We setup stuff that we use a lot, to avoid calculating each time + */ +static void qib_6120_tidtemplate(struct qib_devdata *dd) +{ + u32 egrsize = dd->rcvegrbufsize; + + /* + * For now, we always allocate 4KB buffers (at init) so we can + * receive max size packets. We may want a module parameter to + * specify 2KB or 4KB and/or make be per ctxt instead of per device + * for those who want to reduce memory footprint. Note that the + * rcvhdrentsize size must be large enough to hold the largest + * IB header (currently 96 bytes) that we expect to handle (plus of + * course the 2 dwords of RHF). + */ + if (egrsize == 2048) + dd->tidtemplate = 1U << 29; + else if (egrsize == 4096) + dd->tidtemplate = 2U << 29; + dd->tidinvalid = 0; +} + +int __attribute__((weak)) qib_unordered_wc(void) +{ + return 0; +} + +/** + * qib_6120_get_base_info - set chip-specific flags for user code + * @rcd: the qlogic_ib ctxt + * @kbase: qib_base_info pointer + * + * We set the PCIE flag because the lower bandwidth on PCIe vs + * HyperTransport can affect some user packet algorithms. + */ +static int qib_6120_get_base_info(struct qib_ctxtdata *rcd, + struct qib_base_info *kinfo) +{ + if (qib_unordered_wc()) + kinfo->spi_runtime_flags |= QIB_RUNTIME_FORCE_WC_ORDER; + + kinfo->spi_runtime_flags |= QIB_RUNTIME_PCIE | + QIB_RUNTIME_FORCE_PIOAVAIL | QIB_RUNTIME_PIO_REGSWAPPED; + return 0; +} + + +static struct qib_message_header * +qib_6120_get_msgheader(struct qib_devdata *dd, __le32 *rhf_addr) +{ + return (struct qib_message_header *) + &rhf_addr[sizeof(u64) / sizeof(u32)]; +} + +static void qib_6120_config_ctxts(struct qib_devdata *dd) +{ + dd->ctxtcnt = qib_read_kreg32(dd, kr_portcnt); + if (qib_n_krcv_queues > 1) { + dd->first_user_ctxt = qib_n_krcv_queues * dd->num_pports; + if (dd->first_user_ctxt > dd->ctxtcnt) + dd->first_user_ctxt = dd->ctxtcnt; + dd->qpn_mask = dd->first_user_ctxt <= 2 ? 2 : 6; + } else + dd->first_user_ctxt = dd->num_pports; + dd->n_krcv_queues = dd->first_user_ctxt; +} + +static void qib_update_6120_usrhead(struct qib_ctxtdata *rcd, u64 hd, + u32 updegr, u32 egrhd, u32 npkts) +{ + if (updegr) + qib_write_ureg(rcd->dd, ur_rcvegrindexhead, egrhd, rcd->ctxt); + qib_write_ureg(rcd->dd, ur_rcvhdrhead, hd, rcd->ctxt); +} + +static u32 qib_6120_hdrqempty(struct qib_ctxtdata *rcd) +{ + u32 head, tail; + + head = qib_read_ureg32(rcd->dd, ur_rcvhdrhead, rcd->ctxt); + if (rcd->rcvhdrtail_kvaddr) + tail = qib_get_rcvhdrtail(rcd); + else + tail = qib_read_ureg32(rcd->dd, ur_rcvhdrtail, rcd->ctxt); + return head == tail; +} + +/* + * Used when we close any ctxt, for DMA already in flight + * at close. Can't be done until we know hdrq size, so not + * early in chip init. + */ +static void alloc_dummy_hdrq(struct qib_devdata *dd) +{ + dd->cspec->dummy_hdrq = dma_alloc_coherent(&dd->pcidev->dev, + dd->rcd[0]->rcvhdrq_size, + &dd->cspec->dummy_hdrq_phys, + GFP_ATOMIC | __GFP_COMP); + if (!dd->cspec->dummy_hdrq) { + qib_devinfo(dd->pcidev, "Couldn't allocate dummy hdrq\n"); + /* fallback to just 0'ing */ + dd->cspec->dummy_hdrq_phys = 0UL; + } +} + +/* + * Modify the RCVCTRL register in chip-specific way. This + * is a function because bit positions and (future) register + * location is chip-specific, but the needed operations are + * generic. <op> is a bit-mask because we often want to + * do multiple modifications. + */ +static void rcvctrl_6120_mod(struct qib_pportdata *ppd, unsigned int op, + int ctxt) +{ + struct qib_devdata *dd = ppd->dd; + u64 mask, val; + unsigned long flags; + + spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); + + if (op & QIB_RCVCTRL_TAILUPD_ENB) + dd->rcvctrl |= (1ULL << QLOGIC_IB_R_TAILUPD_SHIFT); + if (op & QIB_RCVCTRL_TAILUPD_DIS) + dd->rcvctrl &= ~(1ULL << QLOGIC_IB_R_TAILUPD_SHIFT); + if (op & QIB_RCVCTRL_PKEY_ENB) + dd->rcvctrl &= ~(1ULL << IBA6120_R_PKEY_DIS_SHIFT); + if (op & QIB_RCVCTRL_PKEY_DIS) + dd->rcvctrl |= (1ULL << IBA6120_R_PKEY_DIS_SHIFT); + if (ctxt < 0) + mask = (1ULL << dd->ctxtcnt) - 1; + else + mask = (1ULL << ctxt); + if (op & QIB_RCVCTRL_CTXT_ENB) { + /* always done for specific ctxt */ + dd->rcvctrl |= (mask << SYM_LSB(RcvCtrl, PortEnable)); + if (!(dd->flags & QIB_NODMA_RTAIL)) + dd->rcvctrl |= 1ULL << QLOGIC_IB_R_TAILUPD_SHIFT; + /* Write these registers before the context is enabled. */ + qib_write_kreg_ctxt(dd, kr_rcvhdrtailaddr, ctxt, + dd->rcd[ctxt]->rcvhdrqtailaddr_phys); + qib_write_kreg_ctxt(dd, kr_rcvhdraddr, ctxt, + dd->rcd[ctxt]->rcvhdrq_phys); + + if (ctxt == 0 && !dd->cspec->dummy_hdrq) + alloc_dummy_hdrq(dd); + } + if (op & QIB_RCVCTRL_CTXT_DIS) + dd->rcvctrl &= ~(mask << SYM_LSB(RcvCtrl, PortEnable)); + if (op & QIB_RCVCTRL_INTRAVAIL_ENB) + dd->rcvctrl |= (mask << QLOGIC_IB_R_INTRAVAIL_SHIFT); + if (op & QIB_RCVCTRL_INTRAVAIL_DIS) + dd->rcvctrl &= ~(mask << QLOGIC_IB_R_INTRAVAIL_SHIFT); + qib_write_kreg(dd, kr_rcvctrl, dd->rcvctrl); + if ((op & QIB_RCVCTRL_INTRAVAIL_ENB) && dd->rhdrhead_intr_off) { + /* arm rcv interrupt */ + val = qib_read_ureg32(dd, ur_rcvhdrhead, ctxt) | + dd->rhdrhead_intr_off; + qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt); + } + if (op & QIB_RCVCTRL_CTXT_ENB) { + /* + * Init the context registers also; if we were + * disabled, tail and head should both be zero + * already from the enable, but since we don't + * know, we have to do it explicitly. + */ + val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt); + qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt); + + val = qib_read_ureg32(dd, ur_rcvhdrtail, ctxt); + dd->rcd[ctxt]->head = val; + /* If kctxt, interrupt on next receive. */ + if (ctxt < dd->first_user_ctxt) + val |= dd->rhdrhead_intr_off; + qib_write_ureg(dd, ur_rcvhdrhead, val, ctxt); + } + if (op & QIB_RCVCTRL_CTXT_DIS) { + /* + * Be paranoid, and never write 0's to these, just use an + * unused page. Of course, + * rcvhdraddr points to a large chunk of memory, so this + * could still trash things, but at least it won't trash + * page 0, and by disabling the ctxt, it should stop "soon", + * even if a packet or two is in already in flight after we + * disabled the ctxt. Only 6120 has this issue. + */ + if (ctxt >= 0) { + qib_write_kreg_ctxt(dd, kr_rcvhdrtailaddr, ctxt, + dd->cspec->dummy_hdrq_phys); + qib_write_kreg_ctxt(dd, kr_rcvhdraddr, ctxt, + dd->cspec->dummy_hdrq_phys); + } else { + unsigned i; + + for (i = 0; i < dd->cfgctxts; i++) { + qib_write_kreg_ctxt(dd, kr_rcvhdrtailaddr, + i, dd->cspec->dummy_hdrq_phys); + qib_write_kreg_ctxt(dd, kr_rcvhdraddr, + i, dd->cspec->dummy_hdrq_phys); + } + } + } + spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); +} + +/* + * Modify the SENDCTRL register in chip-specific way. This + * is a function there may be multiple such registers with + * slightly different layouts. Only operations actually used + * are implemented yet. + * Chip requires no back-back sendctrl writes, so write + * scratch register after writing sendctrl + */ +static void sendctrl_6120_mod(struct qib_pportdata *ppd, u32 op) +{ + struct qib_devdata *dd = ppd->dd; + u64 tmp_dd_sendctrl; + unsigned long flags; + + spin_lock_irqsave(&dd->sendctrl_lock, flags); + + /* First the ones that are "sticky", saved in shadow */ + if (op & QIB_SENDCTRL_CLEAR) + dd->sendctrl = 0; + if (op & QIB_SENDCTRL_SEND_DIS) + dd->sendctrl &= ~SYM_MASK(SendCtrl, PIOEnable); + else if (op & QIB_SENDCTRL_SEND_ENB) + dd->sendctrl |= SYM_MASK(SendCtrl, PIOEnable); + if (op & QIB_SENDCTRL_AVAIL_DIS) + dd->sendctrl &= ~SYM_MASK(SendCtrl, PIOBufAvailUpd); + else if (op & QIB_SENDCTRL_AVAIL_ENB) + dd->sendctrl |= SYM_MASK(SendCtrl, PIOBufAvailUpd); + + if (op & QIB_SENDCTRL_DISARM_ALL) { + u32 i, last; + + tmp_dd_sendctrl = dd->sendctrl; + /* + * disarm any that are not yet launched, disabling sends + * and updates until done. + */ + last = dd->piobcnt2k + dd->piobcnt4k; + tmp_dd_sendctrl &= + ~(SYM_MASK(SendCtrl, PIOEnable) | + SYM_MASK(SendCtrl, PIOBufAvailUpd)); + for (i = 0; i < last; i++) { + qib_write_kreg(dd, kr_sendctrl, tmp_dd_sendctrl | + SYM_MASK(SendCtrl, Disarm) | i); + qib_write_kreg(dd, kr_scratch, 0); + } + } + + tmp_dd_sendctrl = dd->sendctrl; + + if (op & QIB_SENDCTRL_FLUSH) + tmp_dd_sendctrl |= SYM_MASK(SendCtrl, Abort); + if (op & QIB_SENDCTRL_DISARM) + tmp_dd_sendctrl |= SYM_MASK(SendCtrl, Disarm) | + ((op & QIB_6120_SendCtrl_DisarmPIOBuf_RMASK) << + SYM_LSB(SendCtrl, DisarmPIOBuf)); + if (op & QIB_SENDCTRL_AVAIL_BLIP) + tmp_dd_sendctrl &= ~SYM_MASK(SendCtrl, PIOBufAvailUpd); + + qib_write_kreg(dd, kr_sendctrl, tmp_dd_sendctrl); + qib_write_kreg(dd, kr_scratch, 0); + + if (op & QIB_SENDCTRL_AVAIL_BLIP) { + qib_write_kreg(dd, kr_sendctrl, dd->sendctrl); + qib_write_kreg(dd, kr_scratch, 0); + } + + spin_unlock_irqrestore(&dd->sendctrl_lock, flags); + + if (op & QIB_SENDCTRL_FLUSH) { + u32 v; + /* + * ensure writes have hit chip, then do a few + * more reads, to allow DMA of pioavail registers + * to occur, so in-memory copy is in sync with + * the chip. Not always safe to sleep. + */ + v = qib_read_kreg32(dd, kr_scratch); + qib_write_kreg(dd, kr_scratch, v); + v = qib_read_kreg32(dd, kr_scratch); + qib_write_kreg(dd, kr_scratch, v); + qib_read_kreg32(dd, kr_scratch); + } +} + +/** + * qib_portcntr_6120 - read a per-port counter + * @dd: the qlogic_ib device + * @creg: the counter to snapshot + */ +static u64 qib_portcntr_6120(struct qib_pportdata *ppd, u32 reg) +{ + u64 ret = 0ULL; + struct qib_devdata *dd = ppd->dd; + u16 creg; + /* 0xffff for unimplemented or synthesized counters */ + static const u16 xlator[] = { + [QIBPORTCNTR_PKTSEND] = cr_pktsend, + [QIBPORTCNTR_WORDSEND] = cr_wordsend, + [QIBPORTCNTR_PSXMITDATA] = 0xffff, + [QIBPORTCNTR_PSXMITPKTS] = 0xffff, + [QIBPORTCNTR_PSXMITWAIT] = 0xffff, + [QIBPORTCNTR_SENDSTALL] = cr_sendstall, + [QIBPORTCNTR_PKTRCV] = cr_pktrcv, + [QIBPORTCNTR_PSRCVDATA] = 0xffff, + [QIBPORTCNTR_PSRCVPKTS] = 0xffff, + [QIBPORTCNTR_RCVEBP] = cr_rcvebp, + [QIBPORTCNTR_RCVOVFL] = cr_rcvovfl, + [QIBPORTCNTR_WORDRCV] = cr_wordrcv, + [QIBPORTCNTR_RXDROPPKT] = cr_rxdroppkt, + [QIBPORTCNTR_RXLOCALPHYERR] = 0xffff, + [QIBPORTCNTR_RXVLERR] = 0xffff, + [QIBPORTCNTR_ERRICRC] = cr_erricrc, + [QIBPORTCNTR_ERRVCRC] = cr_errvcrc, + [QIBPORTCNTR_ERRLPCRC] = cr_errlpcrc, + [QIBPORTCNTR_BADFORMAT] = cr_badformat, + [QIBPORTCNTR_ERR_RLEN] = cr_err_rlen, + [QIBPORTCNTR_IBSYMBOLERR] = cr_ibsymbolerr, + [QIBPORTCNTR_INVALIDRLEN] = cr_invalidrlen, + [QIBPORTCNTR_UNSUPVL] = cr_txunsupvl, + [QIBPORTCNTR_EXCESSBUFOVFL] = 0xffff, + [QIBPORTCNTR_ERRLINK] = cr_errlink, + [QIBPORTCNTR_IBLINKDOWN] = cr_iblinkdown, + [QIBPORTCNTR_IBLINKERRRECOV] = cr_iblinkerrrecov, + [QIBPORTCNTR_LLI] = 0xffff, + [QIBPORTCNTR_PSINTERVAL] = 0xffff, + [QIBPORTCNTR_PSSTART] = 0xffff, + [QIBPORTCNTR_PSSTAT] = 0xffff, + [QIBPORTCNTR_VL15PKTDROP] = 0xffff, + [QIBPORTCNTR_ERRPKEY] = cr_errpkey, + [QIBPORTCNTR_KHDROVFL] = 0xffff, + }; + + if (reg >= ARRAY_SIZE(xlator)) { + qib_devinfo(ppd->dd->pcidev, + "Unimplemented portcounter %u\n", reg); + goto done; + } + creg = xlator[reg]; + + /* handle counters requests not implemented as chip counters */ + if (reg == QIBPORTCNTR_LLI) + ret = dd->cspec->lli_errs; + else if (reg == QIBPORTCNTR_EXCESSBUFOVFL) + ret = dd->cspec->overrun_thresh_errs; + else if (reg == QIBPORTCNTR_KHDROVFL) { + int i; + + /* sum over all kernel contexts */ + for (i = 0; i < dd->first_user_ctxt; i++) + ret += read_6120_creg32(dd, cr_portovfl + i); + } else if (reg == QIBPORTCNTR_PSSTAT) + ret = dd->cspec->pma_sample_status; + if (creg == 0xffff) + goto done; + + /* + * only fast incrementing counters are 64bit; use 32 bit reads to + * avoid two independent reads when on opteron + */ + if (creg == cr_wordsend || creg == cr_wordrcv || + creg == cr_pktsend || creg == cr_pktrcv) + ret = read_6120_creg(dd, creg); + else + ret = read_6120_creg32(dd, creg); + if (creg == cr_ibsymbolerr) { + if (dd->cspec->ibdeltainprog) + ret -= ret - dd->cspec->ibsymsnap; + ret -= dd->cspec->ibsymdelta; + } else if (creg == cr_iblinkerrrecov) { + if (dd->cspec->ibdeltainprog) + ret -= ret - dd->cspec->iblnkerrsnap; + ret -= dd->cspec->iblnkerrdelta; + } + if (reg == QIBPORTCNTR_RXDROPPKT) /* add special cased count */ + ret += dd->cspec->rxfc_unsupvl_errs; + +done: + return ret; +} + +/* + * Device counter names (not port-specific), one line per stat, + * single string. Used by utilities like ipathstats to print the stats + * in a way which works for different versions of drivers, without changing + * the utility. Names need to be 12 chars or less (w/o newline), for proper + * display by utility. + * Non-error counters are first. + * Start of "error" conters is indicated by a leading "E " on the first + * "error" counter, and doesn't count in label length. + * The EgrOvfl list needs to be last so we truncate them at the configured + * context count for the device. + * cntr6120indices contains the corresponding register indices. + */ +static const char cntr6120names[] = + "Interrupts\n" + "HostBusStall\n" + "E RxTIDFull\n" + "RxTIDInvalid\n" + "Ctxt0EgrOvfl\n" + "Ctxt1EgrOvfl\n" + "Ctxt2EgrOvfl\n" + "Ctxt3EgrOvfl\n" + "Ctxt4EgrOvfl\n"; + +static const size_t cntr6120indices[] = { + cr_lbint, + cr_lbflowstall, + cr_errtidfull, + cr_errtidvalid, + cr_portovfl + 0, + cr_portovfl + 1, + cr_portovfl + 2, + cr_portovfl + 3, + cr_portovfl + 4, +}; + +/* + * same as cntr6120names and cntr6120indices, but for port-specific counters. + * portcntr6120indices is somewhat complicated by some registers needing + * adjustments of various kinds, and those are ORed with _PORT_VIRT_FLAG + */ +static const char portcntr6120names[] = + "TxPkt\n" + "TxFlowPkt\n" + "TxWords\n" + "RxPkt\n" + "RxFlowPkt\n" + "RxWords\n" + "TxFlowStall\n" + "E IBStatusChng\n" + "IBLinkDown\n" + "IBLnkRecov\n" + "IBRxLinkErr\n" + "IBSymbolErr\n" + "RxLLIErr\n" + "RxBadFormat\n" + "RxBadLen\n" + "RxBufOvrfl\n" + "RxEBP\n" + "RxFlowCtlErr\n" + "RxICRCerr\n" + "RxLPCRCerr\n" + "RxVCRCerr\n" + "RxInvalLen\n" + "RxInvalPKey\n" + "RxPktDropped\n" + "TxBadLength\n" + "TxDropped\n" + "TxInvalLen\n" + "TxUnderrun\n" + "TxUnsupVL\n" + ; + +#define _PORT_VIRT_FLAG 0x8000 /* "virtual", need adjustments */ +static const size_t portcntr6120indices[] = { + QIBPORTCNTR_PKTSEND | _PORT_VIRT_FLAG, + cr_pktsendflow, + QIBPORTCNTR_WORDSEND | _PORT_VIRT_FLAG, + QIBPORTCNTR_PKTRCV | _PORT_VIRT_FLAG, + cr_pktrcvflowctrl, + QIBPORTCNTR_WORDRCV | _PORT_VIRT_FLAG, + QIBPORTCNTR_SENDSTALL | _PORT_VIRT_FLAG, + cr_ibstatuschange, + QIBPORTCNTR_IBLINKDOWN | _PORT_VIRT_FLAG, + QIBPORTCNTR_IBLINKERRRECOV | _PORT_VIRT_FLAG, + QIBPORTCNTR_ERRLINK | _PORT_VIRT_FLAG, + QIBPORTCNTR_IBSYMBOLERR | _PORT_VIRT_FLAG, + QIBPORTCNTR_LLI | _PORT_VIRT_FLAG, + QIBPORTCNTR_BADFORMAT | _PORT_VIRT_FLAG, + QIBPORTCNTR_ERR_RLEN | _PORT_VIRT_FLAG, + QIBPORTCNTR_RCVOVFL | _PORT_VIRT_FLAG, + QIBPORTCNTR_RCVEBP | _PORT_VIRT_FLAG, + cr_rcvflowctrl_err, + QIBPORTCNTR_ERRICRC | _PORT_VIRT_FLAG, + QIBPORTCNTR_ERRLPCRC | _PORT_VIRT_FLAG, + QIBPORTCNTR_ERRVCRC | _PORT_VIRT_FLAG, + QIBPORTCNTR_INVALIDRLEN | _PORT_VIRT_FLAG, + QIBPORTCNTR_ERRPKEY | _PORT_VIRT_FLAG, + QIBPORTCNTR_RXDROPPKT | _PORT_VIRT_FLAG, + cr_invalidslen, + cr_senddropped, + cr_errslen, + cr_sendunderrun, + cr_txunsupvl, +}; + +/* do all the setup to make the counter reads efficient later */ +static void init_6120_cntrnames(struct qib_devdata *dd) +{ + int i, j = 0; + char *s; + + for (i = 0, s = (char *)cntr6120names; s && j <= dd->cfgctxts; + i++) { + /* we always have at least one counter before the egrovfl */ + if (!j && !strncmp("Ctxt0EgrOvfl", s + 1, 12)) + j = 1; + s = strchr(s + 1, '\n'); + if (s && j) + j++; + } + dd->cspec->ncntrs = i; + if (!s) + /* full list; size is without terminating null */ + dd->cspec->cntrnamelen = sizeof(cntr6120names) - 1; + else + dd->cspec->cntrnamelen = 1 + s - cntr6120names; + dd->cspec->cntrs = kmalloc_array(dd->cspec->ncntrs, sizeof(u64), + GFP_KERNEL); + + for (i = 0, s = (char *)portcntr6120names; s; i++) + s = strchr(s + 1, '\n'); + dd->cspec->nportcntrs = i - 1; + dd->cspec->portcntrnamelen = sizeof(portcntr6120names) - 1; + dd->cspec->portcntrs = kmalloc_array(dd->cspec->nportcntrs, + sizeof(u64), + GFP_KERNEL); +} + +static u32 qib_read_6120cntrs(struct qib_devdata *dd, loff_t pos, char **namep, + u64 **cntrp) +{ + u32 ret; + + if (namep) { + ret = dd->cspec->cntrnamelen; + if (pos >= ret) + ret = 0; /* final read after getting everything */ + else + *namep = (char *)cntr6120names; + } else { + u64 *cntr = dd->cspec->cntrs; + int i; + + ret = dd->cspec->ncntrs * sizeof(u64); + if (!cntr || pos >= ret) { + /* everything read, or couldn't get memory */ + ret = 0; + goto done; + } + if (pos >= ret) { + ret = 0; /* final read after getting everything */ + goto done; + } + *cntrp = cntr; + for (i = 0; i < dd->cspec->ncntrs; i++) + *cntr++ = read_6120_creg32(dd, cntr6120indices[i]); + } +done: + return ret; +} + +static u32 qib_read_6120portcntrs(struct qib_devdata *dd, loff_t pos, u32 port, + char **namep, u64 **cntrp) +{ + u32 ret; + + if (namep) { + ret = dd->cspec->portcntrnamelen; + if (pos >= ret) + ret = 0; /* final read after getting everything */ + else + *namep = (char *)portcntr6120names; + } else { + u64 *cntr = dd->cspec->portcntrs; + struct qib_pportdata *ppd = &dd->pport[port]; + int i; + + ret = dd->cspec->nportcntrs * sizeof(u64); + if (!cntr || pos >= ret) { + /* everything read, or couldn't get memory */ + ret = 0; + goto done; + } + *cntrp = cntr; + for (i = 0; i < dd->cspec->nportcntrs; i++) { + if (portcntr6120indices[i] & _PORT_VIRT_FLAG) + *cntr++ = qib_portcntr_6120(ppd, + portcntr6120indices[i] & + ~_PORT_VIRT_FLAG); + else + *cntr++ = read_6120_creg32(dd, + portcntr6120indices[i]); + } + } +done: + return ret; +} + +static void qib_chk_6120_errormask(struct qib_devdata *dd) +{ + static u32 fixed; + u32 ctrl; + unsigned long errormask; + unsigned long hwerrs; + + if (!dd->cspec->errormask || !(dd->flags & QIB_INITTED)) + return; + + errormask = qib_read_kreg64(dd, kr_errmask); + + if (errormask == dd->cspec->errormask) + return; + fixed++; + + hwerrs = qib_read_kreg64(dd, kr_hwerrstatus); + ctrl = qib_read_kreg32(dd, kr_control); + + qib_write_kreg(dd, kr_errmask, + dd->cspec->errormask); + + if ((hwerrs & dd->cspec->hwerrmask) || + (ctrl & QLOGIC_IB_C_FREEZEMODE)) { + qib_write_kreg(dd, kr_hwerrclear, 0ULL); + qib_write_kreg(dd, kr_errclear, 0ULL); + /* force re-interrupt of pending events, just in case */ + qib_write_kreg(dd, kr_intclear, 0ULL); + qib_devinfo(dd->pcidev, + "errormask fixed(%u) %lx->%lx, ctrl %x hwerr %lx\n", + fixed, errormask, (unsigned long)dd->cspec->errormask, + ctrl, hwerrs); + } +} + +/** + * qib_get_faststats - get word counters from chip before they overflow + * @opaque - contains a pointer to the qlogic_ib device qib_devdata + * + * This needs more work; in particular, decision on whether we really + * need traffic_wds done the way it is + * called from add_timer + */ +static void qib_get_6120_faststats(struct timer_list *t) +{ + struct qib_devdata *dd = from_timer(dd, t, stats_timer); + struct qib_pportdata *ppd = dd->pport; + unsigned long flags; + u64 traffic_wds; + + /* + * don't access the chip while running diags, or memory diags can + * fail + */ + if (!(dd->flags & QIB_INITTED) || dd->diag_client) + /* but re-arm the timer, for diags case; won't hurt other */ + goto done; + + /* + * We now try to maintain an activity timer, based on traffic + * exceeding a threshold, so we need to check the word-counts + * even if they are 64-bit. + */ + traffic_wds = qib_portcntr_6120(ppd, cr_wordsend) + + qib_portcntr_6120(ppd, cr_wordrcv); + spin_lock_irqsave(&dd->eep_st_lock, flags); + traffic_wds -= dd->traffic_wds; + dd->traffic_wds += traffic_wds; + spin_unlock_irqrestore(&dd->eep_st_lock, flags); + + qib_chk_6120_errormask(dd); +done: + mod_timer(&dd->stats_timer, jiffies + HZ * ACTIVITY_TIMER); +} + +/* no interrupt fallback for these chips */ +static int qib_6120_nointr_fallback(struct qib_devdata *dd) +{ + return 0; +} + +/* + * reset the XGXS (between serdes and IBC). Slightly less intrusive + * than resetting the IBC or external link state, and useful in some + * cases to cause some retraining. To do this right, we reset IBC + * as well. + */ +static void qib_6120_xgxs_reset(struct qib_pportdata *ppd) +{ + u64 val, prev_val; + struct qib_devdata *dd = ppd->dd; + + prev_val = qib_read_kreg64(dd, kr_xgxs_cfg); + val = prev_val | QLOGIC_IB_XGXS_RESET; + prev_val &= ~QLOGIC_IB_XGXS_RESET; /* be sure */ + qib_write_kreg(dd, kr_control, + dd->control & ~QLOGIC_IB_C_LINKENABLE); + qib_write_kreg(dd, kr_xgxs_cfg, val); + qib_read_kreg32(dd, kr_scratch); + qib_write_kreg(dd, kr_xgxs_cfg, prev_val); + qib_write_kreg(dd, kr_control, dd->control); +} + +static int qib_6120_get_ib_cfg(struct qib_pportdata *ppd, int which) +{ + int ret; + + switch (which) { + case QIB_IB_CFG_LWID: + ret = ppd->link_width_active; + break; + + case QIB_IB_CFG_SPD: + ret = ppd->link_speed_active; + break; + + case QIB_IB_CFG_LWID_ENB: + ret = ppd->link_width_enabled; + break; + + case QIB_IB_CFG_SPD_ENB: + ret = ppd->link_speed_enabled; + break; + + case QIB_IB_CFG_OP_VLS: + ret = ppd->vls_operational; + break; + + case QIB_IB_CFG_VL_HIGH_CAP: + ret = 0; + break; + + case QIB_IB_CFG_VL_LOW_CAP: + ret = 0; + break; + + case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */ + ret = SYM_FIELD(ppd->dd->cspec->ibcctrl, IBCCtrl, + OverrunThreshold); + break; + + case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */ + ret = SYM_FIELD(ppd->dd->cspec->ibcctrl, IBCCtrl, + PhyerrThreshold); + break; + + case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */ + /* will only take effect when the link state changes */ + ret = (ppd->dd->cspec->ibcctrl & + SYM_MASK(IBCCtrl, LinkDownDefaultState)) ? + IB_LINKINITCMD_SLEEP : IB_LINKINITCMD_POLL; + break; + + case QIB_IB_CFG_HRTBT: /* Get Heartbeat off/enable/auto */ + ret = 0; /* no heartbeat on this chip */ + break; + + case QIB_IB_CFG_PMA_TICKS: + ret = 250; /* 1 usec. */ + break; + + default: + ret = -EINVAL; + break; + } + return ret; +} + +/* + * We assume range checking is already done, if needed. + */ +static int qib_6120_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val) +{ + struct qib_devdata *dd = ppd->dd; + int ret = 0; + u64 val64; + u16 lcmd, licmd; + + switch (which) { + case QIB_IB_CFG_LWID_ENB: + ppd->link_width_enabled = val; + break; + + case QIB_IB_CFG_SPD_ENB: + ppd->link_speed_enabled = val; + break; + + case QIB_IB_CFG_OVERRUN_THRESH: /* IB overrun threshold */ + val64 = SYM_FIELD(dd->cspec->ibcctrl, IBCCtrl, + OverrunThreshold); + if (val64 != val) { + dd->cspec->ibcctrl &= + ~SYM_MASK(IBCCtrl, OverrunThreshold); + dd->cspec->ibcctrl |= (u64) val << + SYM_LSB(IBCCtrl, OverrunThreshold); + qib_write_kreg(dd, kr_ibcctrl, dd->cspec->ibcctrl); + qib_write_kreg(dd, kr_scratch, 0); + } + break; + + case QIB_IB_CFG_PHYERR_THRESH: /* IB PHY error threshold */ + val64 = SYM_FIELD(dd->cspec->ibcctrl, IBCCtrl, + PhyerrThreshold); + if (val64 != val) { + dd->cspec->ibcctrl &= + ~SYM_MASK(IBCCtrl, PhyerrThreshold); + dd->cspec->ibcctrl |= (u64) val << + SYM_LSB(IBCCtrl, PhyerrThreshold); + qib_write_kreg(dd, kr_ibcctrl, dd->cspec->ibcctrl); + qib_write_kreg(dd, kr_scratch, 0); + } + break; + + case QIB_IB_CFG_PKEYS: /* update pkeys */ + val64 = (u64) ppd->pkeys[0] | ((u64) ppd->pkeys[1] << 16) | + ((u64) ppd->pkeys[2] << 32) | + ((u64) ppd->pkeys[3] << 48); + qib_write_kreg(dd, kr_partitionkey, val64); + break; + + case QIB_IB_CFG_LINKDEFAULT: /* IB link default (sleep/poll) */ + /* will only take effect when the link state changes */ + if (val == IB_LINKINITCMD_POLL) + dd->cspec->ibcctrl &= + ~SYM_MASK(IBCCtrl, LinkDownDefaultState); + else /* SLEEP */ + dd->cspec->ibcctrl |= + SYM_MASK(IBCCtrl, LinkDownDefaultState); + qib_write_kreg(dd, kr_ibcctrl, dd->cspec->ibcctrl); + qib_write_kreg(dd, kr_scratch, 0); + break; + + case QIB_IB_CFG_MTU: /* update the MTU in IBC */ + /* + * Update our housekeeping variables, and set IBC max + * size, same as init code; max IBC is max we allow in + * buffer, less the qword pbc, plus 1 for ICRC, in dwords + * Set even if it's unchanged, print debug message only + * on changes. + */ + val = (ppd->ibmaxlen >> 2) + 1; + dd->cspec->ibcctrl &= ~SYM_MASK(IBCCtrl, MaxPktLen); + dd->cspec->ibcctrl |= (u64)val << + SYM_LSB(IBCCtrl, MaxPktLen); + qib_write_kreg(dd, kr_ibcctrl, dd->cspec->ibcctrl); + qib_write_kreg(dd, kr_scratch, 0); + break; + + case QIB_IB_CFG_LSTATE: /* set the IB link state */ + switch (val & 0xffff0000) { + case IB_LINKCMD_DOWN: + lcmd = QLOGIC_IB_IBCC_LINKCMD_DOWN; + if (!dd->cspec->ibdeltainprog) { + dd->cspec->ibdeltainprog = 1; + dd->cspec->ibsymsnap = + read_6120_creg32(dd, cr_ibsymbolerr); + dd->cspec->iblnkerrsnap = + read_6120_creg32(dd, cr_iblinkerrrecov); + } + break; + + case IB_LINKCMD_ARMED: + lcmd = QLOGIC_IB_IBCC_LINKCMD_ARMED; + break; + + case IB_LINKCMD_ACTIVE: + lcmd = QLOGIC_IB_IBCC_LINKCMD_ACTIVE; + break; + + default: + ret = -EINVAL; + qib_dev_err(dd, "bad linkcmd req 0x%x\n", val >> 16); + goto bail; + } + switch (val & 0xffff) { + case IB_LINKINITCMD_NOP: + licmd = 0; + break; + + case IB_LINKINITCMD_POLL: + licmd = QLOGIC_IB_IBCC_LINKINITCMD_POLL; + break; + + case IB_LINKINITCMD_SLEEP: + licmd = QLOGIC_IB_IBCC_LINKINITCMD_SLEEP; + break; + + case IB_LINKINITCMD_DISABLE: + licmd = QLOGIC_IB_IBCC_LINKINITCMD_DISABLE; + break; + + default: + ret = -EINVAL; + qib_dev_err(dd, "bad linkinitcmd req 0x%x\n", + val & 0xffff); + goto bail; + } + qib_set_ib_6120_lstate(ppd, lcmd, licmd); + goto bail; + + case QIB_IB_CFG_HRTBT: + ret = -EINVAL; + break; + + default: + ret = -EINVAL; + } +bail: + return ret; +} + +static int qib_6120_set_loopback(struct qib_pportdata *ppd, const char *what) +{ + int ret = 0; + + if (!strncmp(what, "ibc", 3)) { + ppd->dd->cspec->ibcctrl |= SYM_MASK(IBCCtrl, Loopback); + qib_devinfo(ppd->dd->pcidev, "Enabling IB%u:%u IBC loopback\n", + ppd->dd->unit, ppd->port); + } else if (!strncmp(what, "off", 3)) { + ppd->dd->cspec->ibcctrl &= ~SYM_MASK(IBCCtrl, Loopback); + qib_devinfo(ppd->dd->pcidev, + "Disabling IB%u:%u IBC loopback (normal)\n", + ppd->dd->unit, ppd->port); + } else + ret = -EINVAL; + if (!ret) { + qib_write_kreg(ppd->dd, kr_ibcctrl, ppd->dd->cspec->ibcctrl); + qib_write_kreg(ppd->dd, kr_scratch, 0); + } + return ret; +} + +static void pma_6120_timer(struct timer_list *t) +{ + struct qib_chip_specific *cs = from_timer(cs, t, pma_timer); + struct qib_pportdata *ppd = cs->ppd; + struct qib_ibport *ibp = &ppd->ibport_data; + unsigned long flags; + + spin_lock_irqsave(&ibp->rvp.lock, flags); + if (cs->pma_sample_status == IB_PMA_SAMPLE_STATUS_STARTED) { + cs->pma_sample_status = IB_PMA_SAMPLE_STATUS_RUNNING; + qib_snapshot_counters(ppd, &cs->sword, &cs->rword, + &cs->spkts, &cs->rpkts, &cs->xmit_wait); + mod_timer(&cs->pma_timer, + jiffies + usecs_to_jiffies(ibp->rvp.pma_sample_interval)); + } else if (cs->pma_sample_status == IB_PMA_SAMPLE_STATUS_RUNNING) { + u64 ta, tb, tc, td, te; + + cs->pma_sample_status = IB_PMA_SAMPLE_STATUS_DONE; + qib_snapshot_counters(ppd, &ta, &tb, &tc, &td, &te); + + cs->sword = ta - cs->sword; + cs->rword = tb - cs->rword; + cs->spkts = tc - cs->spkts; + cs->rpkts = td - cs->rpkts; + cs->xmit_wait = te - cs->xmit_wait; + } + spin_unlock_irqrestore(&ibp->rvp.lock, flags); +} + +/* + * Note that the caller has the ibp->rvp.lock held. + */ +static void qib_set_cntr_6120_sample(struct qib_pportdata *ppd, u32 intv, + u32 start) +{ + struct qib_chip_specific *cs = ppd->dd->cspec; + + if (start && intv) { + cs->pma_sample_status = IB_PMA_SAMPLE_STATUS_STARTED; + mod_timer(&cs->pma_timer, jiffies + usecs_to_jiffies(start)); + } else if (intv) { + cs->pma_sample_status = IB_PMA_SAMPLE_STATUS_RUNNING; + qib_snapshot_counters(ppd, &cs->sword, &cs->rword, + &cs->spkts, &cs->rpkts, &cs->xmit_wait); + mod_timer(&cs->pma_timer, jiffies + usecs_to_jiffies(intv)); + } else { + cs->pma_sample_status = IB_PMA_SAMPLE_STATUS_DONE; + cs->sword = 0; + cs->rword = 0; + cs->spkts = 0; + cs->rpkts = 0; + cs->xmit_wait = 0; + } +} + +static u32 qib_6120_iblink_state(u64 ibcs) +{ + u32 state = (u32)SYM_FIELD(ibcs, IBCStatus, LinkState); + + switch (state) { + case IB_6120_L_STATE_INIT: + state = IB_PORT_INIT; + break; + case IB_6120_L_STATE_ARM: + state = IB_PORT_ARMED; + break; + case IB_6120_L_STATE_ACTIVE: + case IB_6120_L_STATE_ACT_DEFER: + state = IB_PORT_ACTIVE; + break; + default: + fallthrough; + case IB_6120_L_STATE_DOWN: + state = IB_PORT_DOWN; + break; + } + return state; +} + +/* returns the IBTA port state, rather than the IBC link training state */ +static u8 qib_6120_phys_portstate(u64 ibcs) +{ + u8 state = (u8)SYM_FIELD(ibcs, IBCStatus, LinkTrainingState); + return qib_6120_physportstate[state]; +} + +static int qib_6120_ib_updown(struct qib_pportdata *ppd, int ibup, u64 ibcs) +{ + unsigned long flags; + + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags &= ~QIBL_IB_FORCE_NOTIFY; + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + + if (ibup) { + if (ppd->dd->cspec->ibdeltainprog) { + ppd->dd->cspec->ibdeltainprog = 0; + ppd->dd->cspec->ibsymdelta += + read_6120_creg32(ppd->dd, cr_ibsymbolerr) - + ppd->dd->cspec->ibsymsnap; + ppd->dd->cspec->iblnkerrdelta += + read_6120_creg32(ppd->dd, cr_iblinkerrrecov) - + ppd->dd->cspec->iblnkerrsnap; + } + qib_hol_init(ppd); + } else { + ppd->dd->cspec->lli_counter = 0; + if (!ppd->dd->cspec->ibdeltainprog) { + ppd->dd->cspec->ibdeltainprog = 1; + ppd->dd->cspec->ibsymsnap = + read_6120_creg32(ppd->dd, cr_ibsymbolerr); + ppd->dd->cspec->iblnkerrsnap = + read_6120_creg32(ppd->dd, cr_iblinkerrrecov); + } + qib_hol_down(ppd); + } + + qib_6120_setup_setextled(ppd, ibup); + + return 0; +} + +/* Does read/modify/write to appropriate registers to + * set output and direction bits selected by mask. + * these are in their canonical postions (e.g. lsb of + * dir will end up in D48 of extctrl on existing chips). + * returns contents of GP Inputs. + */ +static int gpio_6120_mod(struct qib_devdata *dd, u32 out, u32 dir, u32 mask) +{ + u64 read_val, new_out; + unsigned long flags; + + if (mask) { + /* some bits being written, lock access to GPIO */ + dir &= mask; + out &= mask; + spin_lock_irqsave(&dd->cspec->gpio_lock, flags); + dd->cspec->extctrl &= ~((u64)mask << SYM_LSB(EXTCtrl, GPIOOe)); + dd->cspec->extctrl |= ((u64) dir << SYM_LSB(EXTCtrl, GPIOOe)); + new_out = (dd->cspec->gpio_out & ~mask) | out; + + qib_write_kreg(dd, kr_extctrl, dd->cspec->extctrl); + qib_write_kreg(dd, kr_gpio_out, new_out); + dd->cspec->gpio_out = new_out; + spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags); + } + /* + * It is unlikely that a read at this time would get valid + * data on a pin whose direction line was set in the same + * call to this function. We include the read here because + * that allows us to potentially combine a change on one pin with + * a read on another, and because the old code did something like + * this. + */ + read_val = qib_read_kreg64(dd, kr_extstatus); + return SYM_FIELD(read_val, EXTStatus, GPIOIn); +} + +/* + * Read fundamental info we need to use the chip. These are + * the registers that describe chip capabilities, and are + * saved in shadow registers. + */ +static void get_6120_chip_params(struct qib_devdata *dd) +{ + u64 val; + u32 piobufs; + int mtu; + + dd->uregbase = qib_read_kreg32(dd, kr_userregbase); + + dd->rcvtidcnt = qib_read_kreg32(dd, kr_rcvtidcnt); + dd->rcvtidbase = qib_read_kreg32(dd, kr_rcvtidbase); + dd->rcvegrbase = qib_read_kreg32(dd, kr_rcvegrbase); + dd->palign = qib_read_kreg32(dd, kr_palign); + dd->piobufbase = qib_read_kreg64(dd, kr_sendpiobufbase); + dd->pio2k_bufbase = dd->piobufbase & 0xffffffff; + + dd->rcvhdrcnt = qib_read_kreg32(dd, kr_rcvegrcnt); + + val = qib_read_kreg64(dd, kr_sendpiosize); + dd->piosize2k = val & ~0U; + dd->piosize4k = val >> 32; + + mtu = ib_mtu_enum_to_int(qib_ibmtu); + if (mtu == -1) + mtu = QIB_DEFAULT_MTU; + dd->pport->ibmtu = (u32)mtu; + + val = qib_read_kreg64(dd, kr_sendpiobufcnt); + dd->piobcnt2k = val & ~0U; + dd->piobcnt4k = val >> 32; + dd->last_pio = dd->piobcnt4k + dd->piobcnt2k - 1; + /* these may be adjusted in init_chip_wc_pat() */ + dd->pio2kbase = (u32 __iomem *) + (((char __iomem *)dd->kregbase) + dd->pio2k_bufbase); + if (dd->piobcnt4k) { + dd->pio4kbase = (u32 __iomem *) + (((char __iomem *) dd->kregbase) + + (dd->piobufbase >> 32)); + /* + * 4K buffers take 2 pages; we use roundup just to be + * paranoid; we calculate it once here, rather than on + * ever buf allocate + */ + dd->align4k = ALIGN(dd->piosize4k, dd->palign); + } + + piobufs = dd->piobcnt4k + dd->piobcnt2k; + + dd->pioavregs = ALIGN(piobufs, sizeof(u64) * BITS_PER_BYTE / 2) / + (sizeof(u64) * BITS_PER_BYTE / 2); +} + +/* + * The chip base addresses in cspec and cpspec have to be set + * after possible init_chip_wc_pat(), rather than in + * get_6120_chip_params(), so split out as separate function + */ +static void set_6120_baseaddrs(struct qib_devdata *dd) +{ + u32 cregbase; + + cregbase = qib_read_kreg32(dd, kr_counterregbase); + dd->cspec->cregbase = (u64 __iomem *) + ((char __iomem *) dd->kregbase + cregbase); + + dd->egrtidbase = (u64 __iomem *) + ((char __iomem *) dd->kregbase + dd->rcvegrbase); +} + +/* + * Write the final few registers that depend on some of the + * init setup. Done late in init, just before bringing up + * the serdes. + */ +static int qib_late_6120_initreg(struct qib_devdata *dd) +{ + int ret = 0; + u64 val; + + qib_write_kreg(dd, kr_rcvhdrentsize, dd->rcvhdrentsize); + qib_write_kreg(dd, kr_rcvhdrsize, dd->rcvhdrsize); + qib_write_kreg(dd, kr_rcvhdrcnt, dd->rcvhdrcnt); + qib_write_kreg(dd, kr_sendpioavailaddr, dd->pioavailregs_phys); + val = qib_read_kreg64(dd, kr_sendpioavailaddr); + if (val != dd->pioavailregs_phys) { + qib_dev_err(dd, + "Catastrophic software error, SendPIOAvailAddr written as %lx, read back as %llx\n", + (unsigned long) dd->pioavailregs_phys, + (unsigned long long) val); + ret = -EINVAL; + } + return ret; +} + +static int init_6120_variables(struct qib_devdata *dd) +{ + int ret = 0; + struct qib_pportdata *ppd; + u32 sbufs; + + ppd = (struct qib_pportdata *)(dd + 1); + dd->pport = ppd; + dd->num_pports = 1; + + dd->cspec = (struct qib_chip_specific *)(ppd + dd->num_pports); + dd->cspec->ppd = ppd; + ppd->cpspec = NULL; /* not used in this chip */ + + spin_lock_init(&dd->cspec->kernel_tid_lock); + spin_lock_init(&dd->cspec->user_tid_lock); + spin_lock_init(&dd->cspec->rcvmod_lock); + spin_lock_init(&dd->cspec->gpio_lock); + + /* we haven't yet set QIB_PRESENT, so use read directly */ + dd->revision = readq(&dd->kregbase[kr_revision]); + + if ((dd->revision & 0xffffffffU) == 0xffffffffU) { + qib_dev_err(dd, + "Revision register read failure, giving up initialization\n"); + ret = -ENODEV; + goto bail; + } + dd->flags |= QIB_PRESENT; /* now register routines work */ + + dd->majrev = (u8) SYM_FIELD(dd->revision, Revision_R, + ChipRevMajor); + dd->minrev = (u8) SYM_FIELD(dd->revision, Revision_R, + ChipRevMinor); + + get_6120_chip_params(dd); + pe_boardname(dd); /* fill in boardname */ + + /* + * GPIO bits for TWSI data and clock, + * used for serial EEPROM. + */ + dd->gpio_sda_num = _QIB_GPIO_SDA_NUM; + dd->gpio_scl_num = _QIB_GPIO_SCL_NUM; + dd->twsi_eeprom_dev = QIB_TWSI_NO_DEV; + + if (qib_unordered_wc()) + dd->flags |= QIB_PIO_FLUSH_WC; + + ret = qib_init_pportdata(ppd, dd, 0, 1); + if (ret) + goto bail; + ppd->link_width_supported = IB_WIDTH_1X | IB_WIDTH_4X; + ppd->link_speed_supported = QIB_IB_SDR; + ppd->link_width_enabled = IB_WIDTH_4X; + ppd->link_speed_enabled = ppd->link_speed_supported; + /* these can't change for this chip, so set once */ + ppd->link_width_active = ppd->link_width_enabled; + ppd->link_speed_active = ppd->link_speed_enabled; + ppd->vls_supported = IB_VL_VL0; + ppd->vls_operational = ppd->vls_supported; + + dd->rcvhdrentsize = QIB_RCVHDR_ENTSIZE; + dd->rcvhdrsize = QIB_DFLT_RCVHDRSIZE; + dd->rhf_offset = 0; + + /* we always allocate at least 2048 bytes for eager buffers */ + ret = ib_mtu_enum_to_int(qib_ibmtu); + dd->rcvegrbufsize = ret != -1 ? max(ret, 2048) : QIB_DEFAULT_MTU; + dd->rcvegrbufsize_shift = ilog2(dd->rcvegrbufsize); + + qib_6120_tidtemplate(dd); + + /* + * We can request a receive interrupt for 1 or + * more packets from current offset. For now, we set this + * up for a single packet. + */ + dd->rhdrhead_intr_off = 1ULL << 32; + + /* setup the stats timer; the add_timer is done at end of init */ + timer_setup(&dd->stats_timer, qib_get_6120_faststats, 0); + timer_setup(&dd->cspec->pma_timer, pma_6120_timer, 0); + + dd->ureg_align = qib_read_kreg32(dd, kr_palign); + + dd->piosize2kmax_dwords = dd->piosize2k >> 2; + qib_6120_config_ctxts(dd); + qib_set_ctxtcnt(dd); + + ret = init_chip_wc_pat(dd, 0); + if (ret) + goto bail; + set_6120_baseaddrs(dd); /* set chip access pointers now */ + + ret = 0; + if (qib_mini_init) + goto bail; + + qib_num_cfg_vls = 1; /* if any 6120's, only one VL */ + + ret = qib_create_ctxts(dd); + init_6120_cntrnames(dd); + + /* use all of 4KB buffers for the kernel, otherwise 16 */ + sbufs = dd->piobcnt4k ? dd->piobcnt4k : 16; + + dd->lastctxt_piobuf = dd->piobcnt2k + dd->piobcnt4k - sbufs; + dd->pbufsctxt = dd->lastctxt_piobuf / + (dd->cfgctxts - dd->first_user_ctxt); + + if (ret) + goto bail; +bail: + return ret; +} + +/* + * For this chip, we want to use the same buffer every time + * when we are trying to bring the link up (they are always VL15 + * packets). At that link state the packet should always go out immediately + * (or at least be discarded at the tx interface if the link is down). + * If it doesn't, and the buffer isn't available, that means some other + * sender has gotten ahead of us, and is preventing our packet from going + * out. In that case, we flush all packets, and try again. If that still + * fails, we fail the request, and hope things work the next time around. + * + * We don't need very complicated heuristics on whether the packet had + * time to go out or not, since even at SDR 1X, it goes out in very short + * time periods, covered by the chip reads done here and as part of the + * flush. + */ +static u32 __iomem *get_6120_link_buf(struct qib_pportdata *ppd, u32 *bnum) +{ + u32 __iomem *buf; + u32 lbuf = ppd->dd->piobcnt2k + ppd->dd->piobcnt4k - 1; + + /* + * always blip to get avail list updated, since it's almost + * always needed, and is fairly cheap. + */ + sendctrl_6120_mod(ppd->dd->pport, QIB_SENDCTRL_AVAIL_BLIP); + qib_read_kreg64(ppd->dd, kr_scratch); /* extra chip flush */ + buf = qib_getsendbuf_range(ppd->dd, bnum, lbuf, lbuf); + if (buf) + goto done; + + sendctrl_6120_mod(ppd, QIB_SENDCTRL_DISARM_ALL | QIB_SENDCTRL_FLUSH | + QIB_SENDCTRL_AVAIL_BLIP); + ppd->dd->upd_pio_shadow = 1; /* update our idea of what's busy */ + qib_read_kreg64(ppd->dd, kr_scratch); /* extra chip flush */ + buf = qib_getsendbuf_range(ppd->dd, bnum, lbuf, lbuf); +done: + return buf; +} + +static u32 __iomem *qib_6120_getsendbuf(struct qib_pportdata *ppd, u64 pbc, + u32 *pbufnum) +{ + u32 first, last, plen = pbc & QIB_PBC_LENGTH_MASK; + struct qib_devdata *dd = ppd->dd; + u32 __iomem *buf; + + if (((pbc >> 32) & PBC_6120_VL15_SEND_CTRL) && + !(ppd->lflags & (QIBL_IB_AUTONEG_INPROG | QIBL_LINKACTIVE))) + buf = get_6120_link_buf(ppd, pbufnum); + else { + + if ((plen + 1) > dd->piosize2kmax_dwords) + first = dd->piobcnt2k; + else + first = 0; + /* try 4k if all 2k busy, so same last for both sizes */ + last = dd->piobcnt2k + dd->piobcnt4k - 1; + buf = qib_getsendbuf_range(dd, pbufnum, first, last); + } + return buf; +} + +static int init_sdma_6120_regs(struct qib_pportdata *ppd) +{ + return -ENODEV; +} + +static u16 qib_sdma_6120_gethead(struct qib_pportdata *ppd) +{ + return 0; +} + +static int qib_sdma_6120_busy(struct qib_pportdata *ppd) +{ + return 0; +} + +static void qib_sdma_update_6120_tail(struct qib_pportdata *ppd, u16 tail) +{ +} + +static void qib_6120_sdma_sendctrl(struct qib_pportdata *ppd, unsigned op) +{ +} + +static void qib_sdma_set_6120_desc_cnt(struct qib_pportdata *ppd, unsigned cnt) +{ +} + +/* + * the pbc doesn't need a VL15 indicator, but we need it for link_buf. + * The chip ignores the bit if set. + */ +static u32 qib_6120_setpbc_control(struct qib_pportdata *ppd, u32 plen, + u8 srate, u8 vl) +{ + return vl == 15 ? PBC_6120_VL15_SEND_CTRL : 0; +} + +static void qib_6120_initvl15_bufs(struct qib_devdata *dd) +{ +} + +static void qib_6120_init_ctxt(struct qib_ctxtdata *rcd) +{ + rcd->rcvegrcnt = rcd->dd->rcvhdrcnt; + rcd->rcvegr_tid_base = rcd->ctxt * rcd->rcvegrcnt; +} + +static void qib_6120_txchk_change(struct qib_devdata *dd, u32 start, + u32 len, u32 avail, struct qib_ctxtdata *rcd) +{ +} + +static void writescratch(struct qib_devdata *dd, u32 val) +{ + (void) qib_write_kreg(dd, kr_scratch, val); +} + +static int qib_6120_tempsense_rd(struct qib_devdata *dd, int regnum) +{ + return -ENXIO; +} + +#ifdef CONFIG_INFINIBAND_QIB_DCA +static int qib_6120_notify_dca(struct qib_devdata *dd, unsigned long event) +{ + return 0; +} +#endif + +/* Dummy function, as 6120 boards never disable EEPROM Write */ +static int qib_6120_eeprom_wen(struct qib_devdata *dd, int wen) +{ + return 1; +} + +/** + * qib_init_iba6120_funcs - set up the chip-specific function pointers + * @pdev: pci_dev of the qlogic_ib device + * @ent: pci_device_id matching this chip + * + * This is global, and is called directly at init to set up the + * chip-specific function pointers for later use. + * + * It also allocates/partially-inits the qib_devdata struct for + * this device. + */ +struct qib_devdata *qib_init_iba6120_funcs(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct qib_devdata *dd; + int ret; + + dd = qib_alloc_devdata(pdev, sizeof(struct qib_pportdata) + + sizeof(struct qib_chip_specific)); + if (IS_ERR(dd)) + goto bail; + + dd->f_bringup_serdes = qib_6120_bringup_serdes; + dd->f_cleanup = qib_6120_setup_cleanup; + dd->f_clear_tids = qib_6120_clear_tids; + dd->f_free_irq = qib_free_irq; + dd->f_get_base_info = qib_6120_get_base_info; + dd->f_get_msgheader = qib_6120_get_msgheader; + dd->f_getsendbuf = qib_6120_getsendbuf; + dd->f_gpio_mod = gpio_6120_mod; + dd->f_eeprom_wen = qib_6120_eeprom_wen; + dd->f_hdrqempty = qib_6120_hdrqempty; + dd->f_ib_updown = qib_6120_ib_updown; + dd->f_init_ctxt = qib_6120_init_ctxt; + dd->f_initvl15_bufs = qib_6120_initvl15_bufs; + dd->f_intr_fallback = qib_6120_nointr_fallback; + dd->f_late_initreg = qib_late_6120_initreg; + dd->f_setpbc_control = qib_6120_setpbc_control; + dd->f_portcntr = qib_portcntr_6120; + dd->f_put_tid = (dd->minrev >= 2) ? + qib_6120_put_tid_2 : + qib_6120_put_tid; + dd->f_quiet_serdes = qib_6120_quiet_serdes; + dd->f_rcvctrl = rcvctrl_6120_mod; + dd->f_read_cntrs = qib_read_6120cntrs; + dd->f_read_portcntrs = qib_read_6120portcntrs; + dd->f_reset = qib_6120_setup_reset; + dd->f_init_sdma_regs = init_sdma_6120_regs; + dd->f_sdma_busy = qib_sdma_6120_busy; + dd->f_sdma_gethead = qib_sdma_6120_gethead; + dd->f_sdma_sendctrl = qib_6120_sdma_sendctrl; + dd->f_sdma_set_desc_cnt = qib_sdma_set_6120_desc_cnt; + dd->f_sdma_update_tail = qib_sdma_update_6120_tail; + dd->f_sendctrl = sendctrl_6120_mod; + dd->f_set_armlaunch = qib_set_6120_armlaunch; + dd->f_set_cntr_sample = qib_set_cntr_6120_sample; + dd->f_iblink_state = qib_6120_iblink_state; + dd->f_ibphys_portstate = qib_6120_phys_portstate; + dd->f_get_ib_cfg = qib_6120_get_ib_cfg; + dd->f_set_ib_cfg = qib_6120_set_ib_cfg; + dd->f_set_ib_loopback = qib_6120_set_loopback; + dd->f_set_intr_state = qib_6120_set_intr_state; + dd->f_setextled = qib_6120_setup_setextled; + dd->f_txchk_change = qib_6120_txchk_change; + dd->f_update_usrhead = qib_update_6120_usrhead; + dd->f_wantpiobuf_intr = qib_wantpiobuf_6120_intr; + dd->f_xgxs_reset = qib_6120_xgxs_reset; + dd->f_writescratch = writescratch; + dd->f_tempsense_rd = qib_6120_tempsense_rd; +#ifdef CONFIG_INFINIBAND_QIB_DCA + dd->f_notify_dca = qib_6120_notify_dca; +#endif + /* + * Do remaining pcie setup and save pcie values in dd. + * Any error printing is already done by the init code. + * On return, we have the chip mapped and accessible, + * but chip registers are not set up until start of + * init_6120_variables. + */ + ret = qib_pcie_ddinit(dd, pdev, ent); + if (ret < 0) + goto bail_free; + + /* initialize chip-specific variables */ + ret = init_6120_variables(dd); + if (ret) + goto bail_cleanup; + + if (qib_mini_init) + goto bail; + + if (qib_pcie_params(dd, 8, NULL)) + qib_dev_err(dd, + "Failed to setup PCIe or interrupts; continuing anyway\n"); + /* clear diagctrl register, in case diags were running and crashed */ + qib_write_kreg(dd, kr_hwdiagctrl, 0); + + if (qib_read_kreg64(dd, kr_hwerrstatus) & + QLOGIC_IB_HWE_SERDESPLLFAILED) + qib_write_kreg(dd, kr_hwerrclear, + QLOGIC_IB_HWE_SERDESPLLFAILED); + + /* setup interrupt handler (interrupt type handled above) */ + qib_setup_6120_interrupt(dd); + /* Note that qpn_mask is set by qib_6120_config_ctxts() first */ + qib_6120_init_hwerrors(dd); + + goto bail; + +bail_cleanup: + qib_pcie_ddcleanup(dd); +bail_free: + qib_free_devdata(dd); + dd = ERR_PTR(ret); +bail: + return dd; +} |