1 files changed, 288 insertions, 0 deletions
diff --git a/drivers/leds/leds-lp3952.c b/drivers/leds/leds-lp3952.c
new file mode 100644
index 000000000..6ee9131fb
--- /dev/null
+++ b/drivers/leds/leds-lp3952.c
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *	LED driver for TI lp3952 controller
+ *
+ *	Copyright (C) 2016, DAQRI, LLC.
+ *	Author: Tony Makkiel <tony.makkiel@daqri.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/leds-lp3952.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+static int lp3952_register_write(struct i2c_client *client, u8 reg, u8 val)
+{
+	int ret;
+	struct lp3952_led_array *priv = i2c_get_clientdata(client);
+
+	ret = regmap_write(priv->regmap, reg, val);
+
+	if (ret)
+		dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n",
+			__func__, reg, val, ret);
+	return ret;
+}
+
+static void lp3952_on_off(struct lp3952_led_array *priv,
+			  enum lp3952_leds led_id, bool on)
+{
+	int ret, val;
+
+	dev_dbg(&priv->client->dev, "%s LED %d to %d\n", __func__, led_id, on);
+
+	val = 1 << led_id;
+	if (led_id == LP3952_LED_ALL)
+		val = LP3952_LED_MASK_ALL;
+
+	ret = regmap_update_bits(priv->regmap, LP3952_REG_LED_CTRL, val,
+				 on ? val : 0);
+	if (ret)
+		dev_err(&priv->client->dev, "%s, Error %d\n", __func__, ret);
+}
+
+/*
+ * Using Imax to control brightness. There are 4 possible
+ * setting 25, 50, 75 and 100 % of Imax. Possible values are
+ * values 0-4. 0 meaning turn off.
+ */
+static int lp3952_set_brightness(struct led_classdev *cdev,
+				 enum led_brightness value)
+{
+	unsigned int reg, shift_val;
+	struct lp3952_ctrl_hdl *led = container_of(cdev,
+						   struct lp3952_ctrl_hdl,
+						   cdev);
+	struct lp3952_led_array *priv = (struct lp3952_led_array *)led->priv;
+
+	dev_dbg(cdev->dev, "Brightness request: %d on %d\n", value,
+		led->channel);
+
+	if (value == LED_OFF) {
+		lp3952_on_off(priv, led->channel, false);
+		return 0;
+	}
+
+	if (led->channel > LP3952_RED_1) {
+		dev_err(cdev->dev, " %s Invalid LED requested", __func__);
+		return -EINVAL;
+	}
+
+	if (led->channel >= LP3952_BLUE_1) {
+		reg = LP3952_REG_RGB1_MAX_I_CTRL;
+		shift_val = (led->channel - LP3952_BLUE_1) * 2;
+	} else {
+		reg = LP3952_REG_RGB2_MAX_I_CTRL;
+		shift_val = led->channel * 2;
+	}
+
+	/* Enable the LED in case it is not enabled already */
+	lp3952_on_off(priv, led->channel, true);
+
+	return regmap_update_bits(priv->regmap, reg, 3 << shift_val,
+				  --value << shift_val);
+}
+
+static int lp3952_get_label(struct device *dev, const char *label, char *dest)
+{
+	int ret;
+	const char *str;
+
+	ret = device_property_read_string(dev, label, &str);
+	if (ret)
+		return ret;
+
+	strncpy(dest, str, LP3952_LABEL_MAX_LEN);
+	return 0;
+}
+
+static int lp3952_register_led_classdev(struct lp3952_led_array *priv)
+{
+	int i, acpi_ret, ret = -ENODEV;
+	static const char *led_name_hdl[LP3952_LED_ALL] = {
+		"blue2",
+		"green2",
+		"red2",
+		"blue1",
+		"green1",
+		"red1"
+	};
+
+	for (i = 0; i < LP3952_LED_ALL; i++) {
+		acpi_ret = lp3952_get_label(&priv->client->dev, led_name_hdl[i],
+					    priv->leds[i].name);
+		if (acpi_ret)
+			continue;
+
+		priv->leds[i].cdev.name = priv->leds[i].name;
+		priv->leds[i].cdev.brightness = LED_OFF;
+		priv->leds[i].cdev.max_brightness = LP3952_BRIGHT_MAX;
+		priv->leds[i].cdev.brightness_set_blocking =
+				lp3952_set_brightness;
+		priv->leds[i].channel = i;
+		priv->leds[i].priv = priv;
+
+		ret = devm_led_classdev_register(&priv->client->dev,
+						 &priv->leds[i].cdev);
+		if (ret < 0) {
+			dev_err(&priv->client->dev,
+				"couldn't register LED %s\n",
+				priv->leds[i].cdev.name);
+			break;
+		}
+	}
+	return ret;
+}
+
+static int lp3952_set_pattern_gen_cmd(struct lp3952_led_array *priv,
+				      u8 cmd_index, u8 r, u8 g, u8 b,
+				      enum lp3952_tt tt, enum lp3952_cet cet)
+{
+	int ret;
+	struct ptrn_gen_cmd line = {
+		{
+			{
+				.r = r,
+				.g = g,
+				.b = b,
+				.cet = cet,
+				.tt = tt
+			}
+		}
+	};
+
+	if (cmd_index >= LP3952_CMD_REG_COUNT)
+		return -EINVAL;
+
+	ret = lp3952_register_write(priv->client,
+				    LP3952_REG_CMD_0 + cmd_index * 2,
+				    line.bytes.msb);
+	if (ret)
+		return ret;
+
+	return lp3952_register_write(priv->client,
+				      LP3952_REG_CMD_0 + cmd_index * 2 + 1,
+				      line.bytes.lsb);
+}
+
+static int lp3952_configure(struct lp3952_led_array *priv)
+{
+	int ret;
+
+	/* Disable any LEDs on from any previous conf. */
+	ret = lp3952_register_write(priv->client, LP3952_REG_LED_CTRL, 0);
+	if (ret)
+		return ret;
+
+	/* enable rgb patter, loop */
+	ret = lp3952_register_write(priv->client, LP3952_REG_PAT_GEN_CTRL,
+				    LP3952_PATRN_LOOP | LP3952_PATRN_GEN_EN);
+	if (ret)
+		return ret;
+
+	/* Update Bit 6 (Active mode), Select both Led sets, Bit [1:0] */
+	ret = lp3952_register_write(priv->client, LP3952_REG_ENABLES,
+				    LP3952_ACTIVE_MODE | LP3952_INT_B00ST_LDR);
+	if (ret)
+		return ret;
+
+	/* Set Cmd1 for RGB intensity,cmd and transition time */
+	return lp3952_set_pattern_gen_cmd(priv, 0, I46, I71, I100, TT0,
+					   CET197);
+}
+
+static const struct regmap_config lp3952_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = REG_MAX,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static int lp3952_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	int status;
+	struct lp3952_led_array *priv;
+
+	priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->client = client;
+
+	priv->enable_gpio = devm_gpiod_get(&client->dev, "nrst",
+					   GPIOD_OUT_HIGH);
+	if (IS_ERR(priv->enable_gpio)) {
+		status = PTR_ERR(priv->enable_gpio);
+		dev_err(&client->dev, "Failed to enable gpio: %d\n", status);
+		return status;
+	}
+
+	priv->regmap = devm_regmap_init_i2c(client, &lp3952_regmap);
+	if (IS_ERR(priv->regmap)) {
+		int err = PTR_ERR(priv->regmap);
+
+		dev_err(&client->dev, "Failed to allocate register map: %d\n",
+			err);
+		return err;
+	}
+
+	i2c_set_clientdata(client, priv);
+
+	status = lp3952_configure(priv);
+	if (status) {
+		dev_err(&client->dev, "Probe failed. Device not found (%d)\n",
+			status);
+		return status;
+	}
+
+	status = lp3952_register_led_classdev(priv);
+	if (status) {
+		dev_err(&client->dev, "Unable to register led_classdev: %d\n",
+			status);
+		return status;
+	}
+
+	return 0;
+}
+
+static int lp3952_remove(struct i2c_client *client)
+{
+	struct lp3952_led_array *priv;
+
+	priv = i2c_get_clientdata(client);
+	lp3952_on_off(priv, LP3952_LED_ALL, false);
+	gpiod_set_value(priv->enable_gpio, 0);
+
+	return 0;
+}
+
+static const struct i2c_device_id lp3952_id[] = {
+	{LP3952_NAME, 0},
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, lp3952_id);
+
+static struct i2c_driver lp3952_i2c_driver = {
+	.driver = {
+			.name = LP3952_NAME,
+	},
+	.probe = lp3952_probe,
+	.remove = lp3952_remove,
+	.id_table = lp3952_id,
+};
+
+module_i2c_driver(lp3952_i2c_driver);
+
+MODULE_AUTHOR("Tony Makkiel <tony.makkiel@daqri.com>");
+MODULE_DESCRIPTION("lp3952 I2C LED controller driver");
+MODULE_LICENSE("GPL v2");