diff options
Diffstat (limited to 'drivers/media/platform/exynos4-is/fimc-lite.h')
| -rw-r--r-- | drivers/media/platform/exynos4-is/fimc-lite.h | 222 |
1 files changed, 222 insertions, 0 deletions
diff --git a/drivers/media/platform/exynos4-is/fimc-lite.h b/drivers/media/platform/exynos4-is/fimc-lite.h new file mode 100644 index 000000000..e6846c5fc --- /dev/null +++ b/drivers/media/platform/exynos4-is/fimc-lite.h @@ -0,0 +1,222 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2012 Samsung Electronics Co., Ltd. + */ + +#ifndef FIMC_LITE_H_ +#define FIMC_LITE_H_ + +#include <linux/sizes.h> +#include <linux/io.h> +#include <linux/irqreturn.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <linux/spinlock.h> +#include <linux/types.h> +#include <linux/videodev2.h> + +#include <media/media-entity.h> +#include <media/videobuf2-v4l2.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-mediabus.h> +#include <media/drv-intf/exynos-fimc.h> + +#define FIMC_LITE_DRV_NAME "exynos-fimc-lite" +#define FLITE_CLK_NAME "flite" +#define FIMC_LITE_MAX_DEVS 3 +#define FLITE_REQ_BUFS_MIN 2 +#define FLITE_DEFAULT_WIDTH 640 +#define FLITE_DEFAULT_HEIGHT 480 + +/* Bit index definitions for struct fimc_lite::state */ +enum { + ST_FLITE_LPM, + ST_FLITE_PENDING, + ST_FLITE_RUN, + ST_FLITE_STREAM, + ST_FLITE_SUSPENDED, + ST_FLITE_OFF, + ST_FLITE_IN_USE, + ST_FLITE_CONFIG, + ST_SENSOR_STREAM, +}; + +#define FLITE_SD_PAD_SINK 0 +#define FLITE_SD_PAD_SOURCE_DMA 1 +#define FLITE_SD_PAD_SOURCE_ISP 2 +#define FLITE_SD_PADS_NUM 3 + +/** + * struct flite_drvdata - FIMC-LITE IP variant data structure + * @max_width: maximum camera interface input width in pixels + * @max_height: maximum camera interface input height in pixels + * @out_width_align: minimum output width alignment in pixels + * @win_hor_offs_align: minimum camera interface crop window horizontal + * offset alignment in pixels + * @out_hor_offs_align: minimum output DMA compose rectangle horizontal + * offset alignment in pixels + * @max_dma_bufs: number of output DMA buffer start address registers + * @num_instances: total number of FIMC-LITE IP instances available + */ +struct flite_drvdata { + unsigned short max_width; + unsigned short max_height; + unsigned short out_width_align; + unsigned short win_hor_offs_align; + unsigned short out_hor_offs_align; + unsigned short max_dma_bufs; + unsigned short num_instances; +}; + +struct fimc_lite_events { + unsigned int data_overflow; +}; + +#define FLITE_MAX_PLANES 1 + +/** + * struct flite_frame - source/target frame properties + * @f_width: full pixel width + * @f_height: full pixel height + * @rect: crop/composition rectangle + * @fmt: pointer to pixel format description data structure + */ +struct flite_frame { + u16 f_width; + u16 f_height; + struct v4l2_rect rect; + const struct fimc_fmt *fmt; +}; + +/** + * struct flite_buffer - video buffer structure + * @vb: vb2 buffer + * @list: list head for the buffers queue + * @paddr: DMA buffer start address + * @index: DMA start address register's index + */ +struct flite_buffer { + struct vb2_v4l2_buffer vb; + struct list_head list; + dma_addr_t paddr; + unsigned short index; +}; + +/** + * struct fimc_lite - fimc lite structure + * @pdev: pointer to FIMC-LITE platform device + * @dd: SoC specific driver data structure + * @ve: exynos video device entity structure + * @v4l2_dev: pointer to top the level v4l2_device + * @fh: v4l2 file handle + * @subdev: FIMC-LITE subdev + * @vd_pad: media (sink) pad for the capture video node + * @subdev_pads: the subdev media pads + * @sensor: sensor subdev attached to FIMC-LITE directly or through MIPI-CSIS + * @ctrl_handler: v4l2 control handler + * @test_pattern: test pattern controls + * @index: FIMC-LITE platform device index + * @pipeline: video capture pipeline data structure + * @pipeline_ops: media pipeline ops for the video node driver + * @slock: spinlock protecting this data structure and the hw registers + * @lock: mutex serializing video device and the subdev operations + * @clock: FIMC-LITE gate clock + * @regs: memory mapped io registers + * @irq_queue: interrupt handler waitqueue + * @payload: image size in bytes (w x h x bpp) + * @inp_frame: camera input frame structure + * @out_frame: DMA output frame structure + * @out_path: output data path (DMA or FIFO) + * @source_subdev_grp_id: source subdev group id + * @state: driver state flags + * @pending_buf_q: pending buffers queue head + * @active_buf_q: the queue head of buffers scheduled in hardware + * @vb_queue: vb2 buffers queue + * @buf_index: helps to keep track of the DMA start address register index + * @active_buf_count: number of video buffers scheduled in hardware + * @frame_count: the captured frames counter + * @reqbufs_count: the number of buffers requested with REQBUFS ioctl + */ +struct fimc_lite { + struct platform_device *pdev; + struct flite_drvdata *dd; + struct exynos_video_entity ve; + struct v4l2_device *v4l2_dev; + struct v4l2_fh fh; + struct v4l2_subdev subdev; + struct media_pad vd_pad; + struct media_pad subdev_pads[FLITE_SD_PADS_NUM]; + struct v4l2_subdev *sensor; + struct v4l2_ctrl_handler ctrl_handler; + struct v4l2_ctrl *test_pattern; + int index; + + struct mutex lock; + spinlock_t slock; + + struct clk *clock; + void __iomem *regs; + wait_queue_head_t irq_queue; + + unsigned long payload[FLITE_MAX_PLANES]; + struct flite_frame inp_frame; + struct flite_frame out_frame; + atomic_t out_path; + unsigned int source_subdev_grp_id; + + unsigned long state; + struct list_head pending_buf_q; + struct list_head active_buf_q; + struct vb2_queue vb_queue; + unsigned short buf_index; + unsigned int frame_count; + unsigned int reqbufs_count; + + struct fimc_lite_events events; + bool streaming; +}; + +static inline bool fimc_lite_active(struct fimc_lite *fimc) +{ + unsigned long flags; + bool ret; + + spin_lock_irqsave(&fimc->slock, flags); + ret = fimc->state & (1 << ST_FLITE_RUN) || + fimc->state & (1 << ST_FLITE_PENDING); + spin_unlock_irqrestore(&fimc->slock, flags); + return ret; +} + +static inline void fimc_lite_active_queue_add(struct fimc_lite *dev, + struct flite_buffer *buf) +{ + list_add_tail(&buf->list, &dev->active_buf_q); +} + +static inline struct flite_buffer *fimc_lite_active_queue_pop( + struct fimc_lite *dev) +{ + struct flite_buffer *buf = list_entry(dev->active_buf_q.next, + struct flite_buffer, list); + list_del(&buf->list); + return buf; +} + +static inline void fimc_lite_pending_queue_add(struct fimc_lite *dev, + struct flite_buffer *buf) +{ + list_add_tail(&buf->list, &dev->pending_buf_q); +} + +static inline struct flite_buffer *fimc_lite_pending_queue_pop( + struct fimc_lite *dev) +{ + struct flite_buffer *buf = list_entry(dev->pending_buf_q.next, + struct flite_buffer, list); + list_del(&buf->list); + return buf; +} + +#endif /* FIMC_LITE_H_ */ |