diff options
Diffstat (limited to 'drivers/media/usb/tm6000')
-rw-r--r-- | drivers/media/usb/tm6000/Kconfig | 34 | ||||
-rw-r--r-- | drivers/media/usb/tm6000/Makefile | 14 | ||||
-rw-r--r-- | drivers/media/usb/tm6000/tm6000-alsa.c | 441 | ||||
-rw-r--r-- | drivers/media/usb/tm6000/tm6000-cards.c | 1397 | ||||
-rw-r--r-- | drivers/media/usb/tm6000/tm6000-core.c | 916 | ||||
-rw-r--r-- | drivers/media/usb/tm6000/tm6000-dvb.c | 456 | ||||
-rw-r--r-- | drivers/media/usb/tm6000/tm6000-i2c.c | 317 | ||||
-rw-r--r-- | drivers/media/usb/tm6000/tm6000-input.c | 503 | ||||
-rw-r--r-- | drivers/media/usb/tm6000/tm6000-regs.h | 588 | ||||
-rw-r--r-- | drivers/media/usb/tm6000/tm6000-stds.c | 623 | ||||
-rw-r--r-- | drivers/media/usb/tm6000/tm6000-usb-isoc.h | 38 | ||||
-rw-r--r-- | drivers/media/usb/tm6000/tm6000-video.c | 1707 | ||||
-rw-r--r-- | drivers/media/usb/tm6000/tm6000.h | 396 |
13 files changed, 7430 insertions, 0 deletions
diff --git a/drivers/media/usb/tm6000/Kconfig b/drivers/media/usb/tm6000/Kconfig new file mode 100644 index 000000000..56e977deb --- /dev/null +++ b/drivers/media/usb/tm6000/Kconfig @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: GPL-2.0-only +config VIDEO_TM6000 + tristate "TV Master TM5600/6000/6010 driver" + depends on VIDEO_DEV && I2C && INPUT && RC_CORE && USB + select VIDEO_TUNER + select MEDIA_TUNER_XC2028 + select MEDIA_TUNER_XC5000 + select VIDEOBUF_VMALLOC + help + Support for TM5600/TM6000/TM6010 USB Device + + Since these cards have no MPEG decoder onboard, they transmit + only compressed MPEG data over the usb bus, so you need + an external software decoder to watch TV on your computer. + + Say Y if you own such a device and want to use it. + +config VIDEO_TM6000_ALSA + tristate "TV Master TM5600/6000/6010 audio support" + depends on VIDEO_TM6000 && SND + select SND_PCM + help + This is a video4linux driver for direct (DMA) audio for + TM5600/TM6000/TM6010 USB Devices. + + To compile this driver as a module, choose M here: the + module will be called tm6000-alsa. + +config VIDEO_TM6000_DVB + tristate "DVB Support for tm6000 based TV cards" + depends on VIDEO_TM6000 && DVB_CORE && USB + select DVB_ZL10353 + help + This adds support for DVB cards based on the tm5600/tm6000 chip. diff --git a/drivers/media/usb/tm6000/Makefile b/drivers/media/usb/tm6000/Makefile new file mode 100644 index 000000000..75247a02a --- /dev/null +++ b/drivers/media/usb/tm6000/Makefile @@ -0,0 +1,14 @@ +# SPDX-License-Identifier: GPL-2.0 +tm6000-y := tm6000-cards.o \ + tm6000-core.o \ + tm6000-i2c.o \ + tm6000-video.o \ + tm6000-stds.o \ + tm6000-input.o + +obj-$(CONFIG_VIDEO_TM6000) += tm6000.o +obj-$(CONFIG_VIDEO_TM6000_ALSA) += tm6000-alsa.o +obj-$(CONFIG_VIDEO_TM6000_DVB) += tm6000-dvb.o + +ccflags-y += -I $(srctree)/drivers/media/tuners +ccflags-y += -I $(srctree)/drivers/media/dvb-frontends diff --git a/drivers/media/usb/tm6000/tm6000-alsa.c b/drivers/media/usb/tm6000/tm6000-alsa.c new file mode 100644 index 000000000..3a2df36ef --- /dev/null +++ b/drivers/media/usb/tm6000/tm6000-alsa.c @@ -0,0 +1,441 @@ +// SPDX-License-Identifier: GPL-2.0 +// Support for audio capture for tm5600/6000/6010 +// Copyright (c) 2007-2008 Mauro Carvalho Chehab <mchehab@kernel.org> +// +// Based on cx88-alsa.c + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/usb.h> +#include <linux/slab.h> + +#include <linux/delay.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/control.h> +#include <sound/initval.h> + + +#include "tm6000.h" +#include "tm6000-regs.h" + +#undef dprintk + +#define dprintk(level, fmt, arg...) do { \ + if (debug >= level) \ + printk(KERN_INFO "%s/1: " fmt, chip->core->name , ## arg); \ + } while (0) + +/**************************************************************************** + Module global static vars + ****************************************************************************/ + +static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX; /* Index 0-MAX */ + +static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP; + +module_param_array(enable, bool, NULL, 0444); +MODULE_PARM_DESC(enable, "Enable tm6000x soundcard. default enabled."); + +module_param_array(index, int, NULL, 0444); +MODULE_PARM_DESC(index, "Index value for tm6000x capture interface(s)."); + + +/**************************************************************************** + Module macros + ****************************************************************************/ + +MODULE_DESCRIPTION("ALSA driver module for tm5600/tm6000/tm6010 based TV cards"); +MODULE_AUTHOR("Mauro Carvalho Chehab"); +MODULE_LICENSE("GPL v2"); +MODULE_SUPPORTED_DEVICE("{{Trident,tm5600},{{Trident,tm6000},{{Trident,tm6010}"); +static unsigned int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "enable debug messages"); + +/**************************************************************************** + Module specific functions + ****************************************************************************/ + +/* + * BOARD Specific: Sets audio DMA + */ + +static int _tm6000_start_audio_dma(struct snd_tm6000_card *chip) +{ + struct tm6000_core *core = chip->core; + + dprintk(1, "Starting audio DMA\n"); + + /* Enables audio */ + tm6000_set_reg_mask(core, TM6010_REQ07_RCC_ACTIVE_IF, 0x40, 0x40); + + tm6000_set_audio_bitrate(core, 48000); + + return 0; +} + +/* + * BOARD Specific: Resets audio DMA + */ +static int _tm6000_stop_audio_dma(struct snd_tm6000_card *chip) +{ + struct tm6000_core *core = chip->core; + + dprintk(1, "Stopping audio DMA\n"); + + /* Disables audio */ + tm6000_set_reg_mask(core, TM6010_REQ07_RCC_ACTIVE_IF, 0x00, 0x40); + + return 0; +} + +/**************************************************************************** + ALSA PCM Interface + ****************************************************************************/ + +/* + * Digital hardware definition + */ +#define DEFAULT_FIFO_SIZE 4096 + +static const struct snd_pcm_hardware snd_tm6000_digital_hw = { + .info = SNDRV_PCM_INFO_BATCH | + SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP_VALID, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + + .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_KNOT, + .rate_min = 48000, + .rate_max = 48000, + .channels_min = 2, + .channels_max = 2, + .period_bytes_min = 64, + .period_bytes_max = 12544, + .periods_min = 2, + .periods_max = 98, + .buffer_bytes_max = 62720 * 8, +}; + +/* + * audio pcm capture open callback + */ +static int snd_tm6000_pcm_open(struct snd_pcm_substream *substream) +{ + struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + int err; + + err = snd_pcm_hw_constraint_pow2(runtime, 0, + SNDRV_PCM_HW_PARAM_PERIODS); + if (err < 0) + goto _error; + + chip->substream = substream; + + runtime->hw = snd_tm6000_digital_hw; + snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS); + + return 0; +_error: + dprintk(1, "Error opening PCM!\n"); + return err; +} + +/* + * audio close callback + */ +static int snd_tm6000_close(struct snd_pcm_substream *substream) +{ + struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream); + struct tm6000_core *core = chip->core; + + if (atomic_read(&core->stream_started) > 0) { + atomic_set(&core->stream_started, 0); + schedule_work(&core->wq_trigger); + } + + return 0; +} + +static int tm6000_fillbuf(struct tm6000_core *core, char *buf, int size) +{ + struct snd_tm6000_card *chip = core->adev; + struct snd_pcm_substream *substream = chip->substream; + struct snd_pcm_runtime *runtime; + int period_elapsed = 0; + unsigned int stride, buf_pos; + int length; + + if (atomic_read(&core->stream_started) == 0) + return 0; + + if (!size || !substream) { + dprintk(1, "substream was NULL\n"); + return -EINVAL; + } + + runtime = substream->runtime; + if (!runtime || !runtime->dma_area) { + dprintk(1, "runtime was NULL\n"); + return -EINVAL; + } + + buf_pos = chip->buf_pos; + stride = runtime->frame_bits >> 3; + + if (stride == 0) { + dprintk(1, "stride is zero\n"); + return -EINVAL; + } + + length = size / stride; + if (length == 0) { + dprintk(1, "%s: length was zero\n", __func__); + return -EINVAL; + } + + dprintk(1, "Copying %d bytes at %p[%d] - buf size=%d x %d\n", size, + runtime->dma_area, buf_pos, + (unsigned int)runtime->buffer_size, stride); + + if (buf_pos + length >= runtime->buffer_size) { + unsigned int cnt = runtime->buffer_size - buf_pos; + memcpy(runtime->dma_area + buf_pos * stride, buf, cnt * stride); + memcpy(runtime->dma_area, buf + cnt * stride, + length * stride - cnt * stride); + } else + memcpy(runtime->dma_area + buf_pos * stride, buf, + length * stride); + + snd_pcm_stream_lock(substream); + + chip->buf_pos += length; + if (chip->buf_pos >= runtime->buffer_size) + chip->buf_pos -= runtime->buffer_size; + + chip->period_pos += length; + if (chip->period_pos >= runtime->period_size) { + chip->period_pos -= runtime->period_size; + period_elapsed = 1; + } + + snd_pcm_stream_unlock(substream); + + if (period_elapsed) + snd_pcm_period_elapsed(substream); + + return 0; +} + +/* + * prepare callback + */ +static int snd_tm6000_prepare(struct snd_pcm_substream *substream) +{ + struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream); + + chip->buf_pos = 0; + chip->period_pos = 0; + + return 0; +} + + +/* + * trigger callback + */ +static void audio_trigger(struct work_struct *work) +{ + struct tm6000_core *core = container_of(work, struct tm6000_core, + wq_trigger); + struct snd_tm6000_card *chip = core->adev; + + if (atomic_read(&core->stream_started)) { + dprintk(1, "starting capture"); + _tm6000_start_audio_dma(chip); + } else { + dprintk(1, "stopping capture"); + _tm6000_stop_audio_dma(chip); + } +} + +static int snd_tm6000_card_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream); + struct tm6000_core *core = chip->core; + int err = 0; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_START: + atomic_set(&core->stream_started, 1); + break; + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_STOP: + atomic_set(&core->stream_started, 0); + break; + default: + err = -EINVAL; + break; + } + schedule_work(&core->wq_trigger); + + return err; +} +/* + * pointer callback + */ +static snd_pcm_uframes_t snd_tm6000_pointer(struct snd_pcm_substream *substream) +{ + struct snd_tm6000_card *chip = snd_pcm_substream_chip(substream); + + return chip->buf_pos; +} + +/* + * operators + */ +static const struct snd_pcm_ops snd_tm6000_pcm_ops = { + .open = snd_tm6000_pcm_open, + .close = snd_tm6000_close, + .prepare = snd_tm6000_prepare, + .trigger = snd_tm6000_card_trigger, + .pointer = snd_tm6000_pointer, +}; + +/* + * create a PCM device + */ + +/* FIXME: Control interface - How to control volume/mute? */ + +/**************************************************************************** + Basic Flow for Sound Devices + ****************************************************************************/ + +/* + * Alsa Constructor - Component probe + */ +static int tm6000_audio_init(struct tm6000_core *dev) +{ + struct snd_card *card; + struct snd_tm6000_card *chip; + int rc; + static int devnr; + char component[14]; + struct snd_pcm *pcm; + + if (!dev) + return 0; + + if (devnr >= SNDRV_CARDS) + return -ENODEV; + + if (!enable[devnr]) + return -ENOENT; + + rc = snd_card_new(&dev->udev->dev, index[devnr], "tm6000", + THIS_MODULE, 0, &card); + if (rc < 0) { + snd_printk(KERN_ERR "cannot create card instance %d\n", devnr); + return rc; + } + strscpy(card->driver, "tm6000-alsa", sizeof(card->driver)); + strscpy(card->shortname, "TM5600/60x0", sizeof(card->shortname)); + sprintf(card->longname, "TM5600/60x0 Audio at bus %d device %d", + dev->udev->bus->busnum, dev->udev->devnum); + + sprintf(component, "USB%04x:%04x", + le16_to_cpu(dev->udev->descriptor.idVendor), + le16_to_cpu(dev->udev->descriptor.idProduct)); + snd_component_add(card, component); + + chip = kzalloc(sizeof(struct snd_tm6000_card), GFP_KERNEL); + if (!chip) { + rc = -ENOMEM; + goto error; + } + + chip->core = dev; + chip->card = card; + dev->adev = chip; + spin_lock_init(&chip->reg_lock); + + rc = snd_pcm_new(card, "TM6000 Audio", 0, 0, 1, &pcm); + if (rc < 0) + goto error_chip; + + pcm->info_flags = 0; + pcm->private_data = chip; + strscpy(pcm->name, "Trident TM5600/60x0", sizeof(pcm->name)); + + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_tm6000_pcm_ops); + snd_pcm_set_managed_buffer_all(pcm, SNDRV_DMA_TYPE_VMALLOC, NULL, 0, 0); + + INIT_WORK(&dev->wq_trigger, audio_trigger); + rc = snd_card_register(card); + if (rc < 0) + goto error_chip; + + dprintk(1, "Registered audio driver for %s\n", card->longname); + + return 0; + +error_chip: + kfree(chip); + dev->adev = NULL; +error: + snd_card_free(card); + return rc; +} + +static int tm6000_audio_fini(struct tm6000_core *dev) +{ + struct snd_tm6000_card *chip; + + if (!dev) + return 0; + chip = dev->adev; + + if (!chip) + return 0; + + if (!chip->card) + return 0; + + snd_card_free(chip->card); + chip->card = NULL; + kfree(chip); + dev->adev = NULL; + + return 0; +} + +static struct tm6000_ops audio_ops = { + .type = TM6000_AUDIO, + .name = "TM6000 Audio Extension", + .init = tm6000_audio_init, + .fini = tm6000_audio_fini, + .fillbuf = tm6000_fillbuf, +}; + +static int __init tm6000_alsa_register(void) +{ + return tm6000_register_extension(&audio_ops); +} + +static void __exit tm6000_alsa_unregister(void) +{ + tm6000_unregister_extension(&audio_ops); +} + +module_init(tm6000_alsa_register); +module_exit(tm6000_alsa_unregister); diff --git a/drivers/media/usb/tm6000/tm6000-cards.c b/drivers/media/usb/tm6000/tm6000-cards.c new file mode 100644 index 000000000..5358cd8c4 --- /dev/null +++ b/drivers/media/usb/tm6000/tm6000-cards.c @@ -0,0 +1,1397 @@ +// SPDX-License-Identifier: GPL-2.0 +// tm6000-cards.c - driver for TM5600/TM6000/TM6010 USB video capture devices +// +// Copyright (c) 2006-2007 Mauro Carvalho Chehab <mchehab@kernel.org> + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/usb.h> +#include <linux/slab.h> +#include <media/v4l2-common.h> +#include <media/tuner.h> +#include <media/i2c/tvaudio.h> +#include <media/rc-map.h> + +#include "tm6000.h" +#include "tm6000-regs.h" +#include "tuner-xc2028.h" +#include "xc5000.h" + +#define TM6000_BOARD_UNKNOWN 0 +#define TM5600_BOARD_GENERIC 1 +#define TM6000_BOARD_GENERIC 2 +#define TM6010_BOARD_GENERIC 3 +#define TM5600_BOARD_10MOONS_UT821 4 +#define TM5600_BOARD_10MOONS_UT330 5 +#define TM6000_BOARD_ADSTECH_DUAL_TV 6 +#define TM6000_BOARD_FREECOM_AND_SIMILAR 7 +#define TM6000_BOARD_ADSTECH_MINI_DUAL_TV 8 +#define TM6010_BOARD_HAUPPAUGE_900H 9 +#define TM6010_BOARD_BEHOLD_WANDER 10 +#define TM6010_BOARD_BEHOLD_VOYAGER 11 +#define TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE 12 +#define TM6010_BOARD_TWINHAN_TU501 13 +#define TM6010_BOARD_BEHOLD_WANDER_LITE 14 +#define TM6010_BOARD_BEHOLD_VOYAGER_LITE 15 +#define TM5600_BOARD_TERRATEC_GRABSTER 16 + +#define is_generic(model) ((model == TM6000_BOARD_UNKNOWN) || \ + (model == TM5600_BOARD_GENERIC) || \ + (model == TM6000_BOARD_GENERIC) || \ + (model == TM6010_BOARD_GENERIC)) + +#define TM6000_MAXBOARDS 16 +static unsigned int card[] = {[0 ... (TM6000_MAXBOARDS - 1)] = UNSET }; + +module_param_array(card, int, NULL, 0444); + +static unsigned long tm6000_devused; + + +struct tm6000_board { + char *name; + char eename[16]; /* EEPROM name */ + unsigned eename_size; /* size of EEPROM name */ + unsigned eename_pos; /* Position where it appears at ROM */ + + struct tm6000_capabilities caps; + + enum tm6000_devtype type; /* variant of the chipset */ + int tuner_type; /* type of the tuner */ + int tuner_addr; /* tuner address */ + int demod_addr; /* demodulator address */ + + struct tm6000_gpio gpio; + + struct tm6000_input vinput[3]; + struct tm6000_input rinput; + + char *ir_codes; +}; + +static struct tm6000_board tm6000_boards[] = { + [TM6000_BOARD_UNKNOWN] = { + .name = "Unknown tm6000 video grabber", + .caps = { + .has_tuner = 1, + .has_eeprom = 1, + }, + .gpio = { + .tuner_reset = TM6000_GPIO_1, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_ADC1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + }, + [TM5600_BOARD_GENERIC] = { + .name = "Generic tm5600 board", + .type = TM5600, + .tuner_type = TUNER_XC2028, + .tuner_addr = 0xc2 >> 1, + .caps = { + .has_tuner = 1, + .has_eeprom = 1, + }, + .gpio = { + .tuner_reset = TM6000_GPIO_1, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_ADC1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + }, + [TM6000_BOARD_GENERIC] = { + .name = "Generic tm6000 board", + .tuner_type = TUNER_XC2028, + .tuner_addr = 0xc2 >> 1, + .caps = { + .has_tuner = 1, + .has_eeprom = 1, + }, + .gpio = { + .tuner_reset = TM6000_GPIO_1, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_ADC1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + }, + [TM6010_BOARD_GENERIC] = { + .name = "Generic tm6010 board", + .type = TM6010, + .tuner_type = TUNER_XC2028, + .tuner_addr = 0xc2 >> 1, + .demod_addr = 0x1e >> 1, + .caps = { + .has_tuner = 1, + .has_dvb = 1, + .has_zl10353 = 1, + .has_eeprom = 1, + .has_remote = 1, + }, + .gpio = { + .tuner_reset = TM6010_GPIO_2, + .tuner_on = TM6010_GPIO_3, + .demod_reset = TM6010_GPIO_1, + .demod_on = TM6010_GPIO_4, + .power_led = TM6010_GPIO_7, + .dvb_led = TM6010_GPIO_5, + .ir = TM6010_GPIO_0, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_SIF1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + }, + [TM5600_BOARD_10MOONS_UT821] = { + .name = "10Moons UT 821", + .tuner_type = TUNER_XC2028, + .eename = { '1', '0', 'M', 'O', 'O', 'N', 'S', '5', '6', '0', '0', 0xff, 0x45, 0x5b}, + .eename_size = 14, + .eename_pos = 0x14, + .type = TM5600, + .tuner_addr = 0xc2 >> 1, + .caps = { + .has_tuner = 1, + .has_eeprom = 1, + }, + .gpio = { + .tuner_reset = TM6000_GPIO_1, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_ADC1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + }, + [TM5600_BOARD_10MOONS_UT330] = { + .name = "10Moons UT 330", + .tuner_type = TUNER_PHILIPS_FQ1216AME_MK4, + .tuner_addr = 0xc8 >> 1, + .caps = { + .has_tuner = 1, + .has_dvb = 0, + .has_zl10353 = 0, + .has_eeprom = 1, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_ADC1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + }, + [TM6000_BOARD_ADSTECH_DUAL_TV] = { + .name = "ADSTECH Dual TV USB", + .tuner_type = TUNER_XC2028, + .tuner_addr = 0xc8 >> 1, + .caps = { + .has_tuner = 1, + .has_tda9874 = 1, + .has_dvb = 1, + .has_zl10353 = 1, + .has_eeprom = 1, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_ADC1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + }, + [TM6000_BOARD_FREECOM_AND_SIMILAR] = { + .name = "Freecom Hybrid Stick / Moka DVB-T Receiver Dual", + .tuner_type = TUNER_XC2028, /* has a XC3028 */ + .tuner_addr = 0xc2 >> 1, + .demod_addr = 0x1e >> 1, + .caps = { + .has_tuner = 1, + .has_dvb = 1, + .has_zl10353 = 1, + .has_eeprom = 0, + .has_remote = 1, + }, + .gpio = { + .tuner_reset = TM6000_GPIO_4, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_ADC1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + }, + [TM6000_BOARD_ADSTECH_MINI_DUAL_TV] = { + .name = "ADSTECH Mini Dual TV USB", + .tuner_type = TUNER_XC2028, /* has a XC3028 */ + .tuner_addr = 0xc8 >> 1, + .demod_addr = 0x1e >> 1, + .caps = { + .has_tuner = 1, + .has_dvb = 1, + .has_zl10353 = 1, + .has_eeprom = 0, + }, + .gpio = { + .tuner_reset = TM6000_GPIO_4, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_ADC1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + }, + [TM6010_BOARD_HAUPPAUGE_900H] = { + .name = "Hauppauge WinTV HVR-900H / WinTV USB2-Stick", + .eename = { 'H', 0, 'V', 0, 'R', 0, '9', 0, '0', 0, '0', 0, 'H', 0 }, + .eename_size = 14, + .eename_pos = 0x42, + .tuner_type = TUNER_XC2028, /* has a XC3028 */ + .tuner_addr = 0xc2 >> 1, + .demod_addr = 0x1e >> 1, + .type = TM6010, + .ir_codes = RC_MAP_HAUPPAUGE, + .caps = { + .has_tuner = 1, + .has_dvb = 1, + .has_zl10353 = 1, + .has_eeprom = 1, + .has_remote = 1, + }, + .gpio = { + .tuner_reset = TM6010_GPIO_2, + .tuner_on = TM6010_GPIO_3, + .demod_reset = TM6010_GPIO_1, + .demod_on = TM6010_GPIO_4, + .power_led = TM6010_GPIO_7, + .dvb_led = TM6010_GPIO_5, + .ir = TM6010_GPIO_0, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_SIF1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + }, + [TM6010_BOARD_BEHOLD_WANDER] = { + .name = "Beholder Wander DVB-T/TV/FM USB2.0", + .tuner_type = TUNER_XC5000, + .tuner_addr = 0xc2 >> 1, + .demod_addr = 0x1e >> 1, + .type = TM6010, + .caps = { + .has_tuner = 1, + .has_dvb = 1, + .has_zl10353 = 1, + .has_eeprom = 1, + .has_remote = 1, + .has_radio = 1, + }, + .gpio = { + .tuner_reset = TM6010_GPIO_0, + .demod_reset = TM6010_GPIO_1, + .power_led = TM6010_GPIO_6, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_SIF1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + .rinput = { + .type = TM6000_INPUT_RADIO, + .amux = TM6000_AMUX_ADC1, + }, + }, + [TM6010_BOARD_BEHOLD_VOYAGER] = { + .name = "Beholder Voyager TV/FM USB2.0", + .tuner_type = TUNER_XC5000, + .tuner_addr = 0xc2 >> 1, + .type = TM6010, + .caps = { + .has_tuner = 1, + .has_dvb = 0, + .has_zl10353 = 0, + .has_eeprom = 1, + .has_remote = 1, + .has_radio = 1, + }, + .gpio = { + .tuner_reset = TM6010_GPIO_0, + .power_led = TM6010_GPIO_6, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_SIF1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + .rinput = { + .type = TM6000_INPUT_RADIO, + .amux = TM6000_AMUX_ADC1, + }, + }, + [TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE] = { + .name = "Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick", + .tuner_type = TUNER_XC2028, /* has a XC3028 */ + .tuner_addr = 0xc2 >> 1, + .demod_addr = 0x1e >> 1, + .type = TM6010, + .caps = { + .has_tuner = 1, + .has_dvb = 1, + .has_zl10353 = 1, + .has_eeprom = 1, + .has_remote = 1, + .has_radio = 1, + }, + .gpio = { + .tuner_reset = TM6010_GPIO_2, + .tuner_on = TM6010_GPIO_3, + .demod_reset = TM6010_GPIO_1, + .demod_on = TM6010_GPIO_4, + .power_led = TM6010_GPIO_7, + .dvb_led = TM6010_GPIO_5, + .ir = TM6010_GPIO_0, + }, + .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_SIF1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + .rinput = { + .type = TM6000_INPUT_RADIO, + .amux = TM6000_AMUX_SIF1, + }, + }, + [TM5600_BOARD_TERRATEC_GRABSTER] = { + .name = "Terratec Grabster AV 150/250 MX", + .type = TM5600, + .tuner_type = TUNER_ABSENT, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_ADC1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + }, + [TM6010_BOARD_TWINHAN_TU501] = { + .name = "Twinhan TU501(704D1)", + .tuner_type = TUNER_XC2028, /* has a XC3028 */ + .tuner_addr = 0xc2 >> 1, + .demod_addr = 0x1e >> 1, + .type = TM6010, + .caps = { + .has_tuner = 1, + .has_dvb = 1, + .has_zl10353 = 1, + .has_eeprom = 1, + .has_remote = 1, + }, + .gpio = { + .tuner_reset = TM6010_GPIO_2, + .tuner_on = TM6010_GPIO_3, + .demod_reset = TM6010_GPIO_1, + .demod_on = TM6010_GPIO_4, + .power_led = TM6010_GPIO_7, + .dvb_led = TM6010_GPIO_5, + .ir = TM6010_GPIO_0, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_SIF1, + }, { + .type = TM6000_INPUT_COMPOSITE1, + .vmux = TM6000_VMUX_VIDEO_A, + .amux = TM6000_AMUX_ADC2, + }, { + .type = TM6000_INPUT_SVIDEO, + .vmux = TM6000_VMUX_VIDEO_AB, + .amux = TM6000_AMUX_ADC2, + }, + }, + }, + [TM6010_BOARD_BEHOLD_WANDER_LITE] = { + .name = "Beholder Wander Lite DVB-T/TV/FM USB2.0", + .tuner_type = TUNER_XC5000, + .tuner_addr = 0xc2 >> 1, + .demod_addr = 0x1e >> 1, + .type = TM6010, + .caps = { + .has_tuner = 1, + .has_dvb = 1, + .has_zl10353 = 1, + .has_eeprom = 1, + .has_remote = 0, + .has_radio = 1, + }, + .gpio = { + .tuner_reset = TM6010_GPIO_0, + .demod_reset = TM6010_GPIO_1, + .power_led = TM6010_GPIO_6, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_SIF1, + }, + }, + .rinput = { + .type = TM6000_INPUT_RADIO, + .amux = TM6000_AMUX_ADC1, + }, + }, + [TM6010_BOARD_BEHOLD_VOYAGER_LITE] = { + .name = "Beholder Voyager Lite TV/FM USB2.0", + .tuner_type = TUNER_XC5000, + .tuner_addr = 0xc2 >> 1, + .type = TM6010, + .caps = { + .has_tuner = 1, + .has_dvb = 0, + .has_zl10353 = 0, + .has_eeprom = 1, + .has_remote = 0, + .has_radio = 1, + }, + .gpio = { + .tuner_reset = TM6010_GPIO_0, + .power_led = TM6010_GPIO_6, + }, + .vinput = { { + .type = TM6000_INPUT_TV, + .vmux = TM6000_VMUX_VIDEO_B, + .amux = TM6000_AMUX_SIF1, + }, + }, + .rinput = { + .type = TM6000_INPUT_RADIO, + .amux = TM6000_AMUX_ADC1, + }, + }, +}; + +/* table of devices that work with this driver */ +static const struct usb_device_id tm6000_id_table[] = { + { USB_DEVICE(0x6000, 0x0001), .driver_info = TM5600_BOARD_GENERIC }, + { USB_DEVICE(0x6000, 0x0002), .driver_info = TM6010_BOARD_GENERIC }, + { USB_DEVICE(0x06e1, 0xf332), .driver_info = TM6000_BOARD_ADSTECH_DUAL_TV }, + { USB_DEVICE(0x14aa, 0x0620), .driver_info = TM6000_BOARD_FREECOM_AND_SIMILAR }, + { USB_DEVICE(0x06e1, 0xb339), .driver_info = TM6000_BOARD_ADSTECH_MINI_DUAL_TV }, + { USB_DEVICE(0x2040, 0x6600), .driver_info = TM6010_BOARD_HAUPPAUGE_900H }, + { USB_DEVICE(0x2040, 0x6601), .driver_info = TM6010_BOARD_HAUPPAUGE_900H }, + { USB_DEVICE(0x2040, 0x6610), .driver_info = TM6010_BOARD_HAUPPAUGE_900H }, + { USB_DEVICE(0x2040, 0x6611), .driver_info = TM6010_BOARD_HAUPPAUGE_900H }, + { USB_DEVICE(0x6000, 0xdec0), .driver_info = TM6010_BOARD_BEHOLD_WANDER }, + { USB_DEVICE(0x6000, 0xdec1), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER }, + { USB_DEVICE(0x0ccd, 0x0086), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE }, + { USB_DEVICE(0x0ccd, 0x00A5), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE }, + { USB_DEVICE(0x0ccd, 0x0079), .driver_info = TM5600_BOARD_TERRATEC_GRABSTER }, + { USB_DEVICE(0x13d3, 0x3240), .driver_info = TM6010_BOARD_TWINHAN_TU501 }, + { USB_DEVICE(0x13d3, 0x3241), .driver_info = TM6010_BOARD_TWINHAN_TU501 }, + { USB_DEVICE(0x13d3, 0x3243), .driver_info = TM6010_BOARD_TWINHAN_TU501 }, + { USB_DEVICE(0x13d3, 0x3264), .driver_info = TM6010_BOARD_TWINHAN_TU501 }, + { USB_DEVICE(0x6000, 0xdec2), .driver_info = TM6010_BOARD_BEHOLD_WANDER_LITE }, + { USB_DEVICE(0x6000, 0xdec3), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER_LITE }, + { } +}; +MODULE_DEVICE_TABLE(usb, tm6000_id_table); + +/* Control power led for show some activity */ +void tm6000_flash_led(struct tm6000_core *dev, u8 state) +{ + /* Power LED unconfigured */ + if (!dev->gpio.power_led) + return; + + /* ON Power LED */ + if (state) { + switch (dev->model) { + case TM6010_BOARD_HAUPPAUGE_900H: + case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: + case TM6010_BOARD_TWINHAN_TU501: + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.power_led, 0x00); + break; + case TM6010_BOARD_BEHOLD_WANDER: + case TM6010_BOARD_BEHOLD_VOYAGER: + case TM6010_BOARD_BEHOLD_WANDER_LITE: + case TM6010_BOARD_BEHOLD_VOYAGER_LITE: + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.power_led, 0x01); + break; + } + } + /* OFF Power LED */ + else { + switch (dev->model) { + case TM6010_BOARD_HAUPPAUGE_900H: + case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: + case TM6010_BOARD_TWINHAN_TU501: + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.power_led, 0x01); + break; + case TM6010_BOARD_BEHOLD_WANDER: + case TM6010_BOARD_BEHOLD_VOYAGER: + case TM6010_BOARD_BEHOLD_WANDER_LITE: + case TM6010_BOARD_BEHOLD_VOYAGER_LITE: + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.power_led, 0x00); + break; + } + } +} + +/* Tuner callback to provide the proper gpio changes needed for xc5000 */ +int tm6000_xc5000_callback(void *ptr, int component, int command, int arg) +{ + int rc = 0; + struct tm6000_core *dev = ptr; + + if (dev->tuner_type != TUNER_XC5000) + return 0; + + switch (command) { + case XC5000_TUNER_RESET: + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.tuner_reset, 0x01); + msleep(15); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.tuner_reset, 0x00); + msleep(15); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.tuner_reset, 0x01); + break; + } + return rc; +} +EXPORT_SYMBOL_GPL(tm6000_xc5000_callback); + +/* Tuner callback to provide the proper gpio changes needed for xc2028 */ + +int tm6000_tuner_callback(void *ptr, int component, int command, int arg) +{ + int rc = 0; + struct tm6000_core *dev = ptr; + + if (dev->tuner_type != TUNER_XC2028) + return 0; + + switch (command) { + case XC2028_RESET_CLK: + tm6000_ir_wait(dev, 0); + + tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, + 0x02, arg); + msleep(10); + rc = tm6000_i2c_reset(dev, 10); + break; + case XC2028_TUNER_RESET: + /* Reset codes during load firmware */ + switch (arg) { + case 0: + /* newer tuner can faster reset */ + switch (dev->model) { + case TM5600_BOARD_10MOONS_UT821: + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.tuner_reset, 0x01); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + 0x300, 0x01); + msleep(10); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.tuner_reset, 0x00); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + 0x300, 0x00); + msleep(10); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.tuner_reset, 0x01); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + 0x300, 0x01); + break; + case TM6010_BOARD_HAUPPAUGE_900H: + case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: + case TM6010_BOARD_TWINHAN_TU501: + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.tuner_reset, 0x01); + msleep(60); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.tuner_reset, 0x00); + msleep(75); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.tuner_reset, 0x01); + msleep(60); + break; + default: + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.tuner_reset, 0x00); + msleep(130); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.tuner_reset, 0x01); + msleep(130); + break; + } + + tm6000_ir_wait(dev, 1); + break; + case 1: + tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, + 0x02, 0x01); + msleep(10); + break; + case 2: + rc = tm6000_i2c_reset(dev, 100); + break; + } + break; + case XC2028_I2C_FLUSH: + tm6000_set_reg(dev, REQ_50_SET_START, 0, 0); + tm6000_set_reg(dev, REQ_51_SET_STOP, 0, 0); + break; + } + return rc; +} +EXPORT_SYMBOL_GPL(tm6000_tuner_callback); + +int tm6000_cards_setup(struct tm6000_core *dev) +{ + /* + * Board-specific initialization sequence. Handles all GPIO + * initialization sequences that are board-specific. + * Up to now, all found devices use GPIO1 and GPIO4 at the same way. + * Probably, they're all based on some reference device. Due to that, + * there's a common routine at the end to handle those GPIO's. Devices + * that use different pinups or init sequences can just return at + * the board-specific session. + */ + switch (dev->model) { + case TM6010_BOARD_HAUPPAUGE_900H: + case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: + case TM6010_BOARD_TWINHAN_TU501: + case TM6010_BOARD_GENERIC: + /* Turn xceive 3028 on */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_on, 0x01); + msleep(15); + /* Turn zarlink zl10353 on */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00); + msleep(15); + /* Reset zarlink zl10353 */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00); + msleep(50); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01); + msleep(15); + /* Turn zarlink zl10353 off */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x01); + msleep(15); + /* ir ? */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.ir, 0x01); + msleep(15); + /* Power led on (blue) */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x00); + msleep(15); + /* DVB led off (orange) */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.dvb_led, 0x01); + msleep(15); + /* Turn zarlink zl10353 on */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00); + msleep(15); + break; + case TM6010_BOARD_BEHOLD_WANDER: + case TM6010_BOARD_BEHOLD_WANDER_LITE: + /* Power led on (blue) */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01); + msleep(15); + /* Reset zarlink zl10353 */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00); + msleep(50); + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01); + msleep(15); + break; + case TM6010_BOARD_BEHOLD_VOYAGER: + case TM6010_BOARD_BEHOLD_VOYAGER_LITE: + /* Power led on (blue) */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01); + msleep(15); + break; + default: + break; + } + + /* + * Default initialization. Most of the devices seem to use GPIO1 + * and GPIO4.on the same way, so, this handles the common sequence + * used by most devices. + * If a device uses a different sequence or different GPIO pins for + * reset, just add the code at the board-specific part + */ + + if (dev->gpio.tuner_reset) { + int rc; + int i; + + for (i = 0; i < 2; i++) { + rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.tuner_reset, 0x00); + if (rc < 0) { + printk(KERN_ERR "Error %i doing tuner reset\n", rc); + return rc; + } + + msleep(10); /* Just to be conservative */ + rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.tuner_reset, 0x01); + if (rc < 0) { + printk(KERN_ERR "Error %i doing tuner reset\n", rc); + return rc; + } + } + } else { + printk(KERN_ERR "Tuner reset is not configured\n"); + return -1; + } + + msleep(50); + + return 0; +}; + +static void tm6000_config_tuner(struct tm6000_core *dev) +{ + struct tuner_setup tun_setup; + + /* Load tuner module */ + v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, + "tuner", dev->tuner_addr, NULL); + + memset(&tun_setup, 0, sizeof(tun_setup)); + tun_setup.type = dev->tuner_type; + tun_setup.addr = dev->tuner_addr; + + tun_setup.mode_mask = 0; + if (dev->caps.has_tuner) + tun_setup.mode_mask |= (T_ANALOG_TV | T_RADIO); + + switch (dev->tuner_type) { + case TUNER_XC2028: + tun_setup.tuner_callback = tm6000_tuner_callback; + break; + case TUNER_XC5000: + tun_setup.tuner_callback = tm6000_xc5000_callback; + break; + } + + v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup); + + switch (dev->tuner_type) { + case TUNER_XC2028: { + struct v4l2_priv_tun_config xc2028_cfg; + struct xc2028_ctrl ctl; + + memset(&xc2028_cfg, 0, sizeof(xc2028_cfg)); + memset(&ctl, 0, sizeof(ctl)); + + ctl.demod = XC3028_FE_ZARLINK456; + + xc2028_cfg.tuner = TUNER_XC2028; + xc2028_cfg.priv = &ctl; + + switch (dev->model) { + case TM6010_BOARD_HAUPPAUGE_900H: + case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: + case TM6010_BOARD_TWINHAN_TU501: + ctl.max_len = 80; + ctl.fname = "xc3028L-v36.fw"; + break; + default: + if (dev->dev_type == TM6010) + ctl.fname = "xc3028-v27.fw"; + else + ctl.fname = "xc3028-v24.fw"; + } + + printk(KERN_INFO "Setting firmware parameters for xc2028\n"); + v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, + &xc2028_cfg); + + } + break; + case TUNER_XC5000: + { + struct v4l2_priv_tun_config xc5000_cfg; + struct xc5000_config ctl = { + .i2c_address = dev->tuner_addr, + .if_khz = 4570, + .radio_input = XC5000_RADIO_FM1_MONO, + }; + + xc5000_cfg.tuner = TUNER_XC5000; + xc5000_cfg.priv = &ctl; + + v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config, + &xc5000_cfg); + } + break; + default: + printk(KERN_INFO "Unknown tuner type. Tuner is not configured.\n"); + break; + } +} + +static int fill_board_specific_data(struct tm6000_core *dev) +{ + int rc; + + dev->dev_type = tm6000_boards[dev->model].type; + dev->tuner_type = tm6000_boards[dev->model].tuner_type; + dev->tuner_addr = tm6000_boards[dev->model].tuner_addr; + + dev->gpio = tm6000_boards[dev->model].gpio; + + dev->ir_codes = tm6000_boards[dev->model].ir_codes; + + dev->demod_addr = tm6000_boards[dev->model].demod_addr; + + dev->caps = tm6000_boards[dev->model].caps; + + dev->vinput[0] = tm6000_boards[dev->model].vinput[0]; + dev->vinput[1] = tm6000_boards[dev->model].vinput[1]; + dev->vinput[2] = tm6000_boards[dev->model].vinput[2]; + dev->rinput = tm6000_boards[dev->model].rinput; + + /* setup per-model quirks */ + switch (dev->model) { + case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: + case TM6010_BOARD_HAUPPAUGE_900H: + dev->quirks |= TM6000_QUIRK_NO_USB_DELAY; + break; + + default: + break; + } + + /* initialize hardware */ + rc = tm6000_init(dev); + if (rc < 0) + return rc; + + return v4l2_device_register(&dev->udev->dev, &dev->v4l2_dev); +} + + +static void use_alternative_detection_method(struct tm6000_core *dev) +{ + int i, model = -1; + + if (!dev->eedata_size) + return; + + for (i = 0; i < ARRAY_SIZE(tm6000_boards); i++) { + if (!tm6000_boards[i].eename_size) + continue; + if (dev->eedata_size < tm6000_boards[i].eename_pos + + tm6000_boards[i].eename_size) + continue; + + if (!memcmp(&dev->eedata[tm6000_boards[i].eename_pos], + tm6000_boards[i].eename, + tm6000_boards[i].eename_size)) { + model = i; + break; + } + } + if (model < 0) { + printk(KERN_INFO "Device has eeprom but is currently unknown\n"); + return; + } + + dev->model = model; + + printk(KERN_INFO "Device identified via eeprom as %s (type = %d)\n", + tm6000_boards[model].name, model); +} + +#if defined(CONFIG_MODULES) && defined(MODULE) +static void request_module_async(struct work_struct *work) +{ + struct tm6000_core *dev = container_of(work, struct tm6000_core, + request_module_wk); + + request_module("tm6000-alsa"); + + if (dev->caps.has_dvb) + request_module("tm6000-dvb"); +} + +static void request_modules(struct tm6000_core *dev) +{ + INIT_WORK(&dev->request_module_wk, request_module_async); + schedule_work(&dev->request_module_wk); +} + +static void flush_request_modules(struct tm6000_core *dev) +{ + flush_work(&dev->request_module_wk); +} +#else +#define request_modules(dev) +#define flush_request_modules(dev) +#endif /* CONFIG_MODULES */ + +static int tm6000_init_dev(struct tm6000_core *dev) +{ + struct v4l2_frequency f; + int rc = 0; + + mutex_init(&dev->lock); + mutex_lock(&dev->lock); + + if (!is_generic(dev->model)) { + rc = fill_board_specific_data(dev); + if (rc < 0) + goto err; + + /* register i2c bus */ + rc = tm6000_i2c_register(dev); + if (rc < 0) + goto err; + } else { + /* register i2c bus */ + rc = tm6000_i2c_register(dev); + if (rc < 0) + goto err; + + use_alternative_detection_method(dev); + + rc = fill_board_specific_data(dev); + if (rc < 0) + goto err; + } + + /* Default values for STD and resolutions */ + dev->width = 720; + dev->height = 480; + dev->norm = V4L2_STD_NTSC_M; + + /* Configure tuner */ + tm6000_config_tuner(dev); + + /* Set video standard */ + v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_std, dev->norm); + + /* Set tuner frequency - also loads firmware on xc2028/xc3028 */ + f.tuner = 0; + f.type = V4L2_TUNER_ANALOG_TV; + f.frequency = 3092; /* 193.25 MHz */ + dev->freq = f.frequency; + v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f); + + if (dev->caps.has_tda9874) + v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, + "tvaudio", I2C_ADDR_TDA9874, NULL); + + /* register and initialize V4L2 */ + rc = tm6000_v4l2_register(dev); + if (rc < 0) + goto err; + + tm6000_add_into_devlist(dev); + tm6000_init_extension(dev); + + tm6000_ir_init(dev); + + request_modules(dev); + + mutex_unlock(&dev->lock); + return 0; + +err: + mutex_unlock(&dev->lock); + return rc; +} + +/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */ +#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) + +static void get_max_endpoint(struct usb_device *udev, + struct usb_host_interface *alt, + char *msgtype, + struct usb_host_endpoint *curr_e, + struct tm6000_endpoint *tm_ep) +{ + u16 tmp = le16_to_cpu(curr_e->desc.wMaxPacketSize); + unsigned int size = tmp & 0x7ff; + + if (udev->speed == USB_SPEED_HIGH) + size = size * hb_mult(tmp); + + if (size > tm_ep->maxsize) { + tm_ep->endp = curr_e; + tm_ep->maxsize = size; + tm_ep->bInterfaceNumber = alt->desc.bInterfaceNumber; + tm_ep->bAlternateSetting = alt->desc.bAlternateSetting; + + printk(KERN_INFO "tm6000: %s endpoint: 0x%02x (max size=%u bytes)\n", + msgtype, curr_e->desc.bEndpointAddress, + size); + } +} + +/* + * tm6000_usb_probe() + * checks for supported devices + */ +static int tm6000_usb_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_device *usbdev; + struct tm6000_core *dev; + int i, rc; + int nr = 0; + char *speed; + + usbdev = usb_get_dev(interface_to_usbdev(interface)); + + /* Selects the proper interface */ + rc = usb_set_interface(usbdev, 0, 1); + if (rc < 0) + goto report_failure; + + /* Check to see next free device and mark as used */ + nr = find_first_zero_bit(&tm6000_devused, TM6000_MAXBOARDS); + if (nr >= TM6000_MAXBOARDS) { + printk(KERN_ERR "tm6000: Supports only %i tm60xx boards.\n", TM6000_MAXBOARDS); + rc = -ENOMEM; + goto put_device; + } + + /* Create and initialize dev struct */ + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) { + rc = -ENOMEM; + goto put_device; + } + spin_lock_init(&dev->slock); + mutex_init(&dev->usb_lock); + + /* Increment usage count */ + set_bit(nr, &tm6000_devused); + snprintf(dev->name, 29, "tm6000 #%d", nr); + + dev->model = id->driver_info; + if (card[nr] < ARRAY_SIZE(tm6000_boards)) + dev->model = card[nr]; + + dev->udev = usbdev; + dev->devno = nr; + + switch (usbdev->speed) { + case USB_SPEED_LOW: + speed = "1.5"; + break; + case USB_SPEED_UNKNOWN: + case USB_SPEED_FULL: + speed = "12"; + break; + case USB_SPEED_HIGH: + speed = "480"; + break; + default: + speed = "unknown"; + } + + /* Get endpoints */ + for (i = 0; i < interface->num_altsetting; i++) { + int ep; + + for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) { + struct usb_host_endpoint *e; + int dir_out; + + e = &interface->altsetting[i].endpoint[ep]; + + dir_out = ((e->desc.bEndpointAddress & + USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT); + + printk(KERN_INFO "tm6000: alt %d, interface %i, class %i\n", + i, + interface->altsetting[i].desc.bInterfaceNumber, + interface->altsetting[i].desc.bInterfaceClass); + + switch (e->desc.bmAttributes) { + case USB_ENDPOINT_XFER_BULK: + if (!dir_out) { + get_max_endpoint(usbdev, + &interface->altsetting[i], + "Bulk IN", e, + &dev->bulk_in); + } else { + get_max_endpoint(usbdev, + &interface->altsetting[i], + "Bulk OUT", e, + &dev->bulk_out); + } + break; + case USB_ENDPOINT_XFER_ISOC: + if (!dir_out) { + get_max_endpoint(usbdev, + &interface->altsetting[i], + "ISOC IN", e, + &dev->isoc_in); + } else { + get_max_endpoint(usbdev, + &interface->altsetting[i], + "ISOC OUT", e, + &dev->isoc_out); + } + break; + case USB_ENDPOINT_XFER_INT: + if (!dir_out) { + get_max_endpoint(usbdev, + &interface->altsetting[i], + "INT IN", e, + &dev->int_in); + } else { + get_max_endpoint(usbdev, + &interface->altsetting[i], + "INT OUT", e, + &dev->int_out); + } + break; + } + } + } + + + printk(KERN_INFO "tm6000: New video device @ %s Mbps (%04x:%04x, ifnum %d)\n", + speed, + le16_to_cpu(dev->udev->descriptor.idVendor), + le16_to_cpu(dev->udev->descriptor.idProduct), + interface->altsetting->desc.bInterfaceNumber); + +/* check if the the device has the iso in endpoint at the correct place */ + if (!dev->isoc_in.endp) { + printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n"); + rc = -ENODEV; + goto free_device; + } + + /* save our data pointer in this interface device */ + usb_set_intfdata(interface, dev); + + printk(KERN_INFO "tm6000: Found %s\n", tm6000_boards[dev->model].name); + + rc = tm6000_init_dev(dev); + if (rc < 0) + goto free_device; + + return 0; + +free_device: + kfree(dev); +report_failure: + printk(KERN_ERR "tm6000: Error %d while registering\n", rc); + + clear_bit(nr, &tm6000_devused); +put_device: + usb_put_dev(usbdev); + return rc; +} + +/* + * tm6000_usb_disconnect() + * called when the device gets disconnected + * video device will be unregistered on v4l2_close in case it is still open + */ +static void tm6000_usb_disconnect(struct usb_interface *interface) +{ + struct tm6000_core *dev = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); + + if (!dev) + return; + + printk(KERN_INFO "tm6000: disconnecting %s\n", dev->name); + + flush_request_modules(dev); + + tm6000_ir_fini(dev); + + if (dev->gpio.power_led) { + switch (dev->model) { + case TM6010_BOARD_HAUPPAUGE_900H: + case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: + case TM6010_BOARD_TWINHAN_TU501: + /* Power led off */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.power_led, 0x01); + msleep(15); + break; + case TM6010_BOARD_BEHOLD_WANDER: + case TM6010_BOARD_BEHOLD_VOYAGER: + case TM6010_BOARD_BEHOLD_WANDER_LITE: + case TM6010_BOARD_BEHOLD_VOYAGER_LITE: + /* Power led off */ + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.power_led, 0x00); + msleep(15); + break; + } + } + tm6000_v4l2_unregister(dev); + + tm6000_i2c_unregister(dev); + + v4l2_device_unregister(&dev->v4l2_dev); + + dev->state |= DEV_DISCONNECTED; + + usb_put_dev(dev->udev); + + tm6000_close_extension(dev); + tm6000_remove_from_devlist(dev); + + clear_bit(dev->devno, &tm6000_devused); + kfree(dev); +} + +static struct usb_driver tm6000_usb_driver = { + .name = "tm6000", + .probe = tm6000_usb_probe, + .disconnect = tm6000_usb_disconnect, + .id_table = tm6000_id_table, +}; + +module_usb_driver(tm6000_usb_driver); + +MODULE_DESCRIPTION("Trident TVMaster TM5600/TM6000/TM6010 USB2 adapter"); +MODULE_AUTHOR("Mauro Carvalho Chehab"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/media/usb/tm6000/tm6000-core.c b/drivers/media/usb/tm6000/tm6000-core.c new file mode 100644 index 000000000..5c8cbc5d6 --- /dev/null +++ b/drivers/media/usb/tm6000/tm6000-core.c @@ -0,0 +1,916 @@ +// SPDX-License-Identifier: GPL-2.0 +// tm6000-core.c - driver for TM5600/TM6000/TM6010 USB video capture devices +// +// Copyright (c) 2006-2007 Mauro Carvalho Chehab <mchehab@kernel.org> +// +// Copyright (c) 2007 Michel Ludwig <michel.ludwig@gmail.com> +// - DVB-T support + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/usb.h> +#include <linux/i2c.h> +#include "tm6000.h" +#include "tm6000-regs.h" +#include <media/v4l2-common.h> +#include <media/tuner.h> + +#define USB_TIMEOUT (5 * HZ) /* ms */ + +int tm6000_read_write_usb(struct tm6000_core *dev, u8 req_type, u8 req, + u16 value, u16 index, u8 *buf, u16 len) +{ + int ret, i; + unsigned int pipe; + u8 *data = NULL; + int delay = 5000; + + if (len) { + data = kzalloc(len, GFP_KERNEL); + if (!data) + return -ENOMEM; + } + + mutex_lock(&dev->usb_lock); + + if (req_type & USB_DIR_IN) + pipe = usb_rcvctrlpipe(dev->udev, 0); + else { + pipe = usb_sndctrlpipe(dev->udev, 0); + memcpy(data, buf, len); + } + + if (tm6000_debug & V4L2_DEBUG_I2C) { + printk(KERN_DEBUG "(dev %p, pipe %08x): ", dev->udev, pipe); + + printk(KERN_CONT "%s: %02x %02x %02x %02x %02x %02x %02x %02x ", + (req_type & USB_DIR_IN) ? " IN" : "OUT", + req_type, req, value&0xff, value>>8, index&0xff, + index>>8, len&0xff, len>>8); + + if (!(req_type & USB_DIR_IN)) { + printk(KERN_CONT ">>> "); + for (i = 0; i < len; i++) + printk(KERN_CONT " %02x", buf[i]); + printk(KERN_CONT "\n"); + } + } + + ret = usb_control_msg(dev->udev, pipe, req, req_type, value, index, + data, len, USB_TIMEOUT); + + if (req_type & USB_DIR_IN) + memcpy(buf, data, len); + + if (tm6000_debug & V4L2_DEBUG_I2C) { + if (ret < 0) { + if (req_type & USB_DIR_IN) + printk(KERN_DEBUG "<<< (len=%d)\n", len); + + printk(KERN_CONT "%s: Error #%d\n", __func__, ret); + } else if (req_type & USB_DIR_IN) { + printk(KERN_CONT "<<< "); + for (i = 0; i < len; i++) + printk(KERN_CONT " %02x", buf[i]); + printk(KERN_CONT "\n"); + } + } + + kfree(data); + + if (dev->quirks & TM6000_QUIRK_NO_USB_DELAY) + delay = 0; + + if (req == REQ_16_SET_GET_I2C_WR1_RDN && !(req_type & USB_DIR_IN)) { + unsigned int tsleep; + /* Calculate delay time, 14000us for 64 bytes */ + tsleep = (len * 200) + 200; + if (tsleep < delay) + tsleep = delay; + usleep_range(tsleep, tsleep + 1000); + } + else if (delay) + usleep_range(delay, delay + 1000); + + mutex_unlock(&dev->usb_lock); + return ret; +} + +int tm6000_set_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index) +{ + return + tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR, + req, value, index, NULL, 0); +} +EXPORT_SYMBOL_GPL(tm6000_set_reg); + +int tm6000_get_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index) +{ + int rc; + u8 buf[1]; + + rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req, + value, index, buf, 1); + + if (rc < 0) + return rc; + + return *buf; +} +EXPORT_SYMBOL_GPL(tm6000_get_reg); + +int tm6000_set_reg_mask(struct tm6000_core *dev, u8 req, u16 value, + u16 index, u16 mask) +{ + int rc; + u8 buf[1]; + u8 new_index; + + rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req, + value, 0, buf, 1); + + if (rc < 0) + return rc; + + new_index = (buf[0] & ~mask) | (index & mask); + + if (new_index == buf[0]) + return 0; + + return tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR, + req, value, new_index, NULL, 0); +} +EXPORT_SYMBOL_GPL(tm6000_set_reg_mask); + +int tm6000_get_reg16(struct tm6000_core *dev, u8 req, u16 value, u16 index) +{ + int rc; + u8 buf[2]; + + rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req, + value, index, buf, 2); + + if (rc < 0) + return rc; + + return buf[1]|buf[0]<<8; +} + +int tm6000_get_reg32(struct tm6000_core *dev, u8 req, u16 value, u16 index) +{ + int rc; + u8 buf[4]; + + rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR, req, + value, index, buf, 4); + + if (rc < 0) + return rc; + + return buf[3] | buf[2] << 8 | buf[1] << 16 | buf[0] << 24; +} + +int tm6000_i2c_reset(struct tm6000_core *dev, u16 tsleep) +{ + int rc; + + rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_CLK, 0); + if (rc < 0) + return rc; + + msleep(tsleep); + + rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, TM6000_GPIO_CLK, 1); + msleep(tsleep); + + return rc; +} + +void tm6000_set_fourcc_format(struct tm6000_core *dev) +{ + if (dev->dev_type == TM6010) { + int val; + + val = tm6000_get_reg(dev, TM6010_REQ07_RCC_ACTIVE_IF, 0) & 0xfc; + if (dev->fourcc == V4L2_PIX_FMT_UYVY) + tm6000_set_reg(dev, TM6010_REQ07_RCC_ACTIVE_IF, val); + else + tm6000_set_reg(dev, TM6010_REQ07_RCC_ACTIVE_IF, val | 1); + } else { + if (dev->fourcc == V4L2_PIX_FMT_UYVY) + tm6000_set_reg(dev, TM6010_REQ07_RC1_TRESHOLD, 0xd0); + else + tm6000_set_reg(dev, TM6010_REQ07_RC1_TRESHOLD, 0x90); + } +} + +static void tm6000_set_vbi(struct tm6000_core *dev) +{ + /* + * FIXME: + * VBI lines and start/end are different between 60Hz and 50Hz + * So, it is very likely that we need to change the config to + * something that takes it into account, doing something different + * if (dev->norm & V4L2_STD_525_60) + */ + + if (dev->dev_type == TM6010) { + tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x01); + tm6000_set_reg(dev, TM6010_REQ07_R41_TELETEXT_VBI_CODE1, 0x27); + tm6000_set_reg(dev, TM6010_REQ07_R42_VBI_DATA_HIGH_LEVEL, 0x55); + tm6000_set_reg(dev, TM6010_REQ07_R43_VBI_DATA_TYPE_LINE7, 0x66); + tm6000_set_reg(dev, TM6010_REQ07_R44_VBI_DATA_TYPE_LINE8, 0x66); + tm6000_set_reg(dev, TM6010_REQ07_R45_VBI_DATA_TYPE_LINE9, 0x66); + tm6000_set_reg(dev, + TM6010_REQ07_R46_VBI_DATA_TYPE_LINE10, 0x66); + tm6000_set_reg(dev, + TM6010_REQ07_R47_VBI_DATA_TYPE_LINE11, 0x66); + tm6000_set_reg(dev, + TM6010_REQ07_R48_VBI_DATA_TYPE_LINE12, 0x66); + tm6000_set_reg(dev, + TM6010_REQ07_R49_VBI_DATA_TYPE_LINE13, 0x66); + tm6000_set_reg(dev, + TM6010_REQ07_R4A_VBI_DATA_TYPE_LINE14, 0x66); + tm6000_set_reg(dev, + TM6010_REQ07_R4B_VBI_DATA_TYPE_LINE15, 0x66); + tm6000_set_reg(dev, + TM6010_REQ07_R4C_VBI_DATA_TYPE_LINE16, 0x66); + tm6000_set_reg(dev, + TM6010_REQ07_R4D_VBI_DATA_TYPE_LINE17, 0x66); + tm6000_set_reg(dev, + TM6010_REQ07_R4E_VBI_DATA_TYPE_LINE18, 0x66); + tm6000_set_reg(dev, + TM6010_REQ07_R4F_VBI_DATA_TYPE_LINE19, 0x66); + tm6000_set_reg(dev, + TM6010_REQ07_R50_VBI_DATA_TYPE_LINE20, 0x66); + tm6000_set_reg(dev, + TM6010_REQ07_R51_VBI_DATA_TYPE_LINE21, 0x66); + tm6000_set_reg(dev, + TM6010_REQ07_R52_VBI_DATA_TYPE_LINE22, 0x66); + tm6000_set_reg(dev, + TM6010_REQ07_R53_VBI_DATA_TYPE_LINE23, 0x00); + tm6000_set_reg(dev, + TM6010_REQ07_R54_VBI_DATA_TYPE_RLINES, 0x00); + tm6000_set_reg(dev, + TM6010_REQ07_R55_VBI_LOOP_FILTER_GAIN, 0x01); + tm6000_set_reg(dev, + TM6010_REQ07_R56_VBI_LOOP_FILTER_I_GAIN, 0x00); + tm6000_set_reg(dev, + TM6010_REQ07_R57_VBI_LOOP_FILTER_P_GAIN, 0x02); + tm6000_set_reg(dev, TM6010_REQ07_R58_VBI_CAPTION_DTO1, 0x35); + tm6000_set_reg(dev, TM6010_REQ07_R59_VBI_CAPTION_DTO0, 0xa0); + tm6000_set_reg(dev, TM6010_REQ07_R5A_VBI_TELETEXT_DTO1, 0x11); + tm6000_set_reg(dev, TM6010_REQ07_R5B_VBI_TELETEXT_DTO0, 0x4c); + tm6000_set_reg(dev, TM6010_REQ07_R40_TELETEXT_VBI_CODE0, 0x01); + tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x00); + } +} + +int tm6000_init_analog_mode(struct tm6000_core *dev) +{ + struct v4l2_frequency f; + + if (dev->dev_type == TM6010) { + u8 active = TM6010_REQ07_RCC_ACTIVE_IF_AUDIO_ENABLE; + + if (!dev->radio) + active |= TM6010_REQ07_RCC_ACTIVE_IF_VIDEO_ENABLE; + + /* Enable video and audio */ + tm6000_set_reg_mask(dev, TM6010_REQ07_RCC_ACTIVE_IF, + active, 0x60); + /* Disable TS input */ + tm6000_set_reg_mask(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, + 0x00, 0x40); + } else { + /* Enables soft reset */ + tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x01); + + if (dev->scaler) + /* Disable Hfilter and Enable TS Drop err */ + tm6000_set_reg(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0x20); + else /* Enable Hfilter and disable TS Drop err */ + tm6000_set_reg(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0x80); + + tm6000_set_reg(dev, TM6010_REQ07_RC3_HSTART1, 0x88); + tm6000_set_reg(dev, TM6000_REQ07_RDA_CLK_SEL, 0x23); + tm6000_set_reg(dev, TM6010_REQ07_RD1_ADDR_FOR_REQ1, 0xc0); + tm6000_set_reg(dev, TM6010_REQ07_RD2_ADDR_FOR_REQ2, 0xd8); + tm6000_set_reg(dev, TM6010_REQ07_RD6_ENDP_REQ1_REQ2, 0x06); + tm6000_set_reg(dev, TM6000_REQ07_RDF_PWDOWN_ACLK, 0x1f); + + /* AP Software reset */ + tm6000_set_reg(dev, TM6010_REQ07_RFF_SOFT_RESET, 0x08); + tm6000_set_reg(dev, TM6010_REQ07_RFF_SOFT_RESET, 0x00); + + tm6000_set_fourcc_format(dev); + + /* Disables soft reset */ + tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x00); + } + msleep(20); + + /* Tuner firmware can now be loaded */ + + /* + * FIXME: This is a hack! xc3028 "sleeps" when no channel is detected + * for more than a few seconds. Not sure why, as this behavior does + * not happen on other devices with xc3028. So, I suspect that it + * is yet another bug at tm6000. After start sleeping, decoding + * doesn't start automatically. Instead, it requires some + * I2C commands to wake it up. As we want to have image at the + * beginning, we needed to add this hack. The better would be to + * discover some way to make tm6000 to wake up without this hack. + */ + f.frequency = dev->freq; + v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f); + + msleep(100); + tm6000_set_standard(dev); + tm6000_set_vbi(dev); + tm6000_set_audio_bitrate(dev, 48000); + + /* switch dvb led off */ + if (dev->gpio.dvb_led) { + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.dvb_led, 0x01); + } + + return 0; +} + +int tm6000_init_digital_mode(struct tm6000_core *dev) +{ + if (dev->dev_type == TM6010) { + /* Disable video and audio */ + tm6000_set_reg_mask(dev, TM6010_REQ07_RCC_ACTIVE_IF, + 0x00, 0x60); + /* Enable TS input */ + tm6000_set_reg_mask(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, + 0x40, 0x40); + /* all power down, but not the digital data port */ + tm6000_set_reg(dev, TM6010_REQ07_RFE_POWER_DOWN, 0x28); + tm6000_set_reg(dev, TM6010_REQ08_RE2_POWER_DOWN_CTRL1, 0xfc); + tm6000_set_reg(dev, TM6010_REQ08_RE6_POWER_DOWN_CTRL2, 0xff); + } else { + tm6000_set_reg(dev, TM6010_REQ07_RFF_SOFT_RESET, 0x08); + tm6000_set_reg(dev, TM6010_REQ07_RFF_SOFT_RESET, 0x00); + tm6000_set_reg(dev, TM6010_REQ07_R3F_RESET, 0x01); + tm6000_set_reg(dev, TM6000_REQ07_RDF_PWDOWN_ACLK, 0x08); + tm6000_set_reg(dev, TM6000_REQ07_RE2_VADC_STATUS_CTL, 0x0c); + tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0xff); + tm6000_set_reg(dev, TM6000_REQ07_REB_VADC_AADC_MODE, 0xd8); + tm6000_set_reg(dev, TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0x40); + tm6000_set_reg(dev, TM6010_REQ07_RC1_TRESHOLD, 0xd0); + tm6000_set_reg(dev, TM6010_REQ07_RC3_HSTART1, 0x09); + tm6000_set_reg(dev, TM6000_REQ07_RDA_CLK_SEL, 0x37); + tm6000_set_reg(dev, TM6010_REQ07_RD1_ADDR_FOR_REQ1, 0xd8); + tm6000_set_reg(dev, TM6010_REQ07_RD2_ADDR_FOR_REQ2, 0xc0); + tm6000_set_reg(dev, TM6010_REQ07_RD6_ENDP_REQ1_REQ2, 0x60); + + tm6000_set_reg(dev, TM6000_REQ07_RE2_VADC_STATUS_CTL, 0x0c); + tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0xff); + tm6000_set_reg(dev, TM6000_REQ07_REB_VADC_AADC_MODE, 0x08); + msleep(50); + + tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x00); + msleep(50); + tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x01); + msleep(50); + tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 0x0020, 0x00); + msleep(100); + } + + /* switch dvb led on */ + if (dev->gpio.dvb_led) { + tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, + dev->gpio.dvb_led, 0x00); + } + + return 0; +} +EXPORT_SYMBOL(tm6000_init_digital_mode); + +struct reg_init { + u8 req; + u8 reg; + u8 val; +}; + +/* The meaning of those initializations are unknown */ +static struct reg_init tm6000_init_tab[] = { + /* REG VALUE */ + { TM6000_REQ07_RDF_PWDOWN_ACLK, 0x1f }, + { TM6010_REQ07_RFF_SOFT_RESET, 0x08 }, + { TM6010_REQ07_RFF_SOFT_RESET, 0x00 }, + { TM6010_REQ07_RD5_POWERSAVE, 0x4f }, + { TM6000_REQ07_RDA_CLK_SEL, 0x23 }, + { TM6000_REQ07_RDB_OUT_SEL, 0x08 }, + { TM6000_REQ07_RE2_VADC_STATUS_CTL, 0x00 }, + { TM6000_REQ07_RE3_VADC_INP_LPF_SEL1, 0x10 }, + { TM6000_REQ07_RE5_VADC_INP_LPF_SEL2, 0x00 }, + { TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0x00 }, + { TM6000_REQ07_REB_VADC_AADC_MODE, 0x64 }, /* 48000 bits/sample, external input */ + { TM6000_REQ07_REE_VADC_CTRL_SEL_CONTROL, 0xc2 }, + + { TM6010_REQ07_R3F_RESET, 0x01 }, /* Start of soft reset */ + { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x00 }, + { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x07 }, + { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f }, + { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00 }, + { TM6010_REQ07_R05_NOISE_THRESHOLD, 0x64 }, + { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x01 }, + { TM6010_REQ07_R08_LUMA_CONTRAST_ADJ, 0x82 }, + { TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ, 0x36 }, + { TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ, 0x50 }, + { TM6010_REQ07_R0C_CHROMA_AGC_CONTROL, 0x6a }, + { TM6010_REQ07_R11_AGC_PEAK_CONTROL, 0xc9 }, + { TM6010_REQ07_R12_AGC_GATE_STARTH, 0x07 }, + { TM6010_REQ07_R13_AGC_GATE_STARTL, 0x3b }, + { TM6010_REQ07_R14_AGC_GATE_WIDTH, 0x47 }, + { TM6010_REQ07_R15_AGC_BP_DELAY, 0x6f }, + { TM6010_REQ07_R17_HLOOP_MAXSTATE, 0xcd }, + { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e }, + { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x8b }, + { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xa2 }, + { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe9 }, + { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c }, + { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc }, + { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc }, + { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd }, + { TM6010_REQ07_R20_HSYNC_RISING_EDGE_TIME, 0x3c }, + { TM6010_REQ07_R21_HSYNC_PHASE_OFFSET, 0x3c }, + { TM6010_REQ07_R2D_CHROMA_BURST_END, 0x48 }, + { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 }, + { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 }, + { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 }, + { TM6010_REQ07_R32_VSYNC_HLOCK_MIN, 0x74 }, + { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x1c }, + { TM6010_REQ07_R34_VSYNC_AGC_MIN, 0x74 }, + { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c }, + { TM6010_REQ07_R36_VSYNC_VBI_MIN, 0x7a }, + { TM6010_REQ07_R37_VSYNC_VBI_MAX, 0x26 }, + { TM6010_REQ07_R38_VSYNC_THRESHOLD, 0x40 }, + { TM6010_REQ07_R39_VSYNC_TIME_CONSTANT, 0x0a }, + { TM6010_REQ07_R42_VBI_DATA_HIGH_LEVEL, 0x55 }, + { TM6010_REQ07_R51_VBI_DATA_TYPE_LINE21, 0x11 }, + { TM6010_REQ07_R55_VBI_LOOP_FILTER_GAIN, 0x01 }, + { TM6010_REQ07_R57_VBI_LOOP_FILTER_P_GAIN, 0x02 }, + { TM6010_REQ07_R58_VBI_CAPTION_DTO1, 0x35 }, + { TM6010_REQ07_R59_VBI_CAPTION_DTO0, 0xa0 }, + { TM6010_REQ07_R80_COMB_FILTER_TRESHOLD, 0x15 }, + { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 }, + { TM6010_REQ07_RC1_TRESHOLD, 0xd0 }, + { TM6010_REQ07_RC3_HSTART1, 0x88 }, + { TM6010_REQ07_R3F_RESET, 0x00 }, /* End of the soft reset */ + { TM6010_REQ05_R18_IMASK7, 0x00 }, +}; + +static struct reg_init tm6010_init_tab[] = { + { TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE, 0x00 }, + { TM6010_REQ07_RC4_HSTART0, 0xa0 }, + { TM6010_REQ07_RC6_HEND0, 0x40 }, + { TM6010_REQ07_RCA_VEND0, 0x31 }, + { TM6010_REQ07_RCC_ACTIVE_IF, 0xe1 }, + { TM6010_REQ07_RE0_DVIDEO_SOURCE, 0x03 }, + { TM6010_REQ07_RFE_POWER_DOWN, 0x7f }, + + { TM6010_REQ08_RE2_POWER_DOWN_CTRL1, 0xf0 }, + { TM6010_REQ08_RE3_ADC_IN1_SEL, 0xf4 }, + { TM6010_REQ08_RE4_ADC_IN2_SEL, 0xf8 }, + { TM6010_REQ08_RE6_POWER_DOWN_CTRL2, 0x00 }, + { TM6010_REQ08_REA_BUFF_DRV_CTRL, 0xf2 }, + { TM6010_REQ08_REB_SIF_GAIN_CTRL, 0xf0 }, + { TM6010_REQ08_REC_REVERSE_YC_CTRL, 0xc2 }, + { TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG, 0x60 }, + { TM6010_REQ08_RF1_AADC_POWER_DOWN, 0xfc }, + + { TM6010_REQ07_R3F_RESET, 0x01 }, + { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x00 }, + { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x07 }, + { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f }, + { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00 }, + { TM6010_REQ07_R05_NOISE_THRESHOLD, 0x64 }, + { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x01 }, + { TM6010_REQ07_R08_LUMA_CONTRAST_ADJ, 0x82 }, + { TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ, 0x36 }, + { TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ, 0x50 }, + { TM6010_REQ07_R0C_CHROMA_AGC_CONTROL, 0x6a }, + { TM6010_REQ07_R11_AGC_PEAK_CONTROL, 0xc9 }, + { TM6010_REQ07_R12_AGC_GATE_STARTH, 0x07 }, + { TM6010_REQ07_R13_AGC_GATE_STARTL, 0x3b }, + { TM6010_REQ07_R14_AGC_GATE_WIDTH, 0x47 }, + { TM6010_REQ07_R15_AGC_BP_DELAY, 0x6f }, + { TM6010_REQ07_R17_HLOOP_MAXSTATE, 0xcd }, + { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e }, + { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x8b }, + { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xa2 }, + { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe9 }, + { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c }, + { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc }, + { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc }, + { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd }, + { TM6010_REQ07_R20_HSYNC_RISING_EDGE_TIME, 0x3c }, + { TM6010_REQ07_R21_HSYNC_PHASE_OFFSET, 0x3c }, + { TM6010_REQ07_R2D_CHROMA_BURST_END, 0x48 }, + { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 }, + { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 }, + { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 }, + { TM6010_REQ07_R32_VSYNC_HLOCK_MIN, 0x74 }, + { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x1c }, + { TM6010_REQ07_R34_VSYNC_AGC_MIN, 0x74 }, + { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c }, + { TM6010_REQ07_R36_VSYNC_VBI_MIN, 0x7a }, + { TM6010_REQ07_R37_VSYNC_VBI_MAX, 0x26 }, + { TM6010_REQ07_R38_VSYNC_THRESHOLD, 0x40 }, + { TM6010_REQ07_R39_VSYNC_TIME_CONSTANT, 0x0a }, + { TM6010_REQ07_R42_VBI_DATA_HIGH_LEVEL, 0x55 }, + { TM6010_REQ07_R51_VBI_DATA_TYPE_LINE21, 0x11 }, + { TM6010_REQ07_R55_VBI_LOOP_FILTER_GAIN, 0x01 }, + { TM6010_REQ07_R57_VBI_LOOP_FILTER_P_GAIN, 0x02 }, + { TM6010_REQ07_R58_VBI_CAPTION_DTO1, 0x35 }, + { TM6010_REQ07_R59_VBI_CAPTION_DTO0, 0xa0 }, + { TM6010_REQ07_R80_COMB_FILTER_TRESHOLD, 0x15 }, + { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 }, + { TM6010_REQ07_RC1_TRESHOLD, 0xd0 }, + { TM6010_REQ07_RC3_HSTART1, 0x88 }, + { TM6010_REQ07_R3F_RESET, 0x00 }, + + { TM6010_REQ05_R18_IMASK7, 0x00 }, + + { TM6010_REQ07_RDC_IR_LEADER1, 0xaa }, + { TM6010_REQ07_RDD_IR_LEADER0, 0x30 }, + { TM6010_REQ07_RDE_IR_PULSE_CNT1, 0x20 }, + { TM6010_REQ07_RDF_IR_PULSE_CNT0, 0xd0 }, + { REQ_04_EN_DISABLE_MCU_INT, 0x02, 0x00 }, + { TM6010_REQ07_RD8_IR, 0x0f }, + + /* set remote wakeup key:any key wakeup */ + { TM6010_REQ07_RE5_REMOTE_WAKEUP, 0xfe }, + { TM6010_REQ07_RDA_IR_WAKEUP_SEL, 0xff }, +}; + +int tm6000_init(struct tm6000_core *dev) +{ + int board, rc = 0, i, size; + struct reg_init *tab; + + /* Check board revision */ + board = tm6000_get_reg32(dev, REQ_40_GET_VERSION, 0, 0); + if (board >= 0) { + switch (board & 0xff) { + case 0xf3: + printk(KERN_INFO "Found tm6000\n"); + if (dev->dev_type != TM6000) + dev->dev_type = TM6000; + break; + case 0xf4: + printk(KERN_INFO "Found tm6010\n"); + if (dev->dev_type != TM6010) + dev->dev_type = TM6010; + break; + default: + printk(KERN_INFO "Unknown board version = 0x%08x\n", board); + } + } else + printk(KERN_ERR "Error %i while retrieving board version\n", board); + + if (dev->dev_type == TM6010) { + tab = tm6010_init_tab; + size = ARRAY_SIZE(tm6010_init_tab); + } else { + tab = tm6000_init_tab; + size = ARRAY_SIZE(tm6000_init_tab); + } + + /* Load board's initialization table */ + for (i = 0; i < size; i++) { + rc = tm6000_set_reg(dev, tab[i].req, tab[i].reg, tab[i].val); + if (rc < 0) { + printk(KERN_ERR "Error %i while setting req %d, reg %d to value %d\n", + rc, + tab[i].req, tab[i].reg, tab[i].val); + return rc; + } + } + + msleep(5); /* Just to be conservative */ + + rc = tm6000_cards_setup(dev); + + return rc; +} + + +int tm6000_set_audio_bitrate(struct tm6000_core *dev, int bitrate) +{ + int val = 0; + u8 areg_f0 = 0x60; /* ADC MCLK = 250 Fs */ + u8 areg_0a = 0x91; /* SIF 48KHz */ + + switch (bitrate) { + case 48000: + areg_f0 = 0x60; /* ADC MCLK = 250 Fs */ + areg_0a = 0x91; /* SIF 48KHz */ + dev->audio_bitrate = bitrate; + break; + case 32000: + areg_f0 = 0x00; /* ADC MCLK = 375 Fs */ + areg_0a = 0x90; /* SIF 32KHz */ + dev->audio_bitrate = bitrate; + break; + default: + return -EINVAL; + } + + + /* enable I2S, if we use sif or external I2S device */ + if (dev->dev_type == TM6010) { + val = tm6000_set_reg(dev, TM6010_REQ08_R0A_A_I2S_MOD, areg_0a); + if (val < 0) + return val; + + val = tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG, + areg_f0, 0xf0); + if (val < 0) + return val; + } else { + val = tm6000_set_reg_mask(dev, TM6000_REQ07_REB_VADC_AADC_MODE, + areg_f0, 0xf0); + if (val < 0) + return val; + } + return 0; +} +EXPORT_SYMBOL_GPL(tm6000_set_audio_bitrate); + +int tm6000_set_audio_rinput(struct tm6000_core *dev) +{ + if (dev->dev_type == TM6010) { + /* Audio crossbar setting, default SIF1 */ + u8 areg_f0; + u8 areg_07 = 0x10; + + switch (dev->rinput.amux) { + case TM6000_AMUX_SIF1: + case TM6000_AMUX_SIF2: + areg_f0 = 0x03; + areg_07 = 0x30; + break; + case TM6000_AMUX_ADC1: + areg_f0 = 0x00; + break; + case TM6000_AMUX_ADC2: + areg_f0 = 0x08; + break; + case TM6000_AMUX_I2S: + areg_f0 = 0x04; + break; + default: + printk(KERN_INFO "%s: audio input doesn't support\n", + dev->name); + return 0; + break; + } + /* Set audio input crossbar */ + tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG, + areg_f0, 0x0f); + /* Mux overflow workaround */ + tm6000_set_reg_mask(dev, TM6010_REQ07_R07_OUTPUT_CONTROL, + areg_07, 0xf0); + } else { + u8 areg_eb; + /* Audio setting, default LINE1 */ + switch (dev->rinput.amux) { + case TM6000_AMUX_ADC1: + areg_eb = 0x00; + break; + case TM6000_AMUX_ADC2: + areg_eb = 0x04; + break; + default: + printk(KERN_INFO "%s: audio input doesn't support\n", + dev->name); + return 0; + break; + } + /* Set audio input */ + tm6000_set_reg_mask(dev, TM6000_REQ07_REB_VADC_AADC_MODE, + areg_eb, 0x0f); + } + return 0; +} + +static void tm6010_set_mute_sif(struct tm6000_core *dev, u8 mute) +{ + u8 mute_reg = 0; + + if (mute) + mute_reg = 0x08; + + tm6000_set_reg_mask(dev, TM6010_REQ08_R0A_A_I2S_MOD, mute_reg, 0x08); +} + +static void tm6010_set_mute_adc(struct tm6000_core *dev, u8 mute) +{ + u8 mute_reg = 0; + + if (mute) + mute_reg = 0x20; + + if (dev->dev_type == TM6010) { + tm6000_set_reg_mask(dev, TM6010_REQ08_RF2_LEFT_CHANNEL_VOL, + mute_reg, 0x20); + tm6000_set_reg_mask(dev, TM6010_REQ08_RF3_RIGHT_CHANNEL_VOL, + mute_reg, 0x20); + } else { + tm6000_set_reg_mask(dev, TM6000_REQ07_REC_VADC_AADC_LVOL, + mute_reg, 0x20); + tm6000_set_reg_mask(dev, TM6000_REQ07_RED_VADC_AADC_RVOL, + mute_reg, 0x20); + } +} + +int tm6000_tvaudio_set_mute(struct tm6000_core *dev, u8 mute) +{ + enum tm6000_mux mux; + + if (dev->radio) + mux = dev->rinput.amux; + else + mux = dev->vinput[dev->input].amux; + + switch (mux) { + case TM6000_AMUX_SIF1: + case TM6000_AMUX_SIF2: + if (dev->dev_type == TM6010) + tm6010_set_mute_sif(dev, mute); + else { + printk(KERN_INFO "ERROR: TM5600 and TM6000 don't has SIF audio inputs. Please check the %s configuration.\n", + dev->name); + return -EINVAL; + } + break; + case TM6000_AMUX_ADC1: + case TM6000_AMUX_ADC2: + tm6010_set_mute_adc(dev, mute); + break; + default: + return -EINVAL; + break; + } + return 0; +} + +static void tm6010_set_volume_sif(struct tm6000_core *dev, int vol) +{ + u8 vol_reg; + + vol_reg = vol & 0x0F; + + if (vol < 0) + vol_reg |= 0x40; + + tm6000_set_reg(dev, TM6010_REQ08_R07_A_LEFT_VOL, vol_reg); + tm6000_set_reg(dev, TM6010_REQ08_R08_A_RIGHT_VOL, vol_reg); +} + +static void tm6010_set_volume_adc(struct tm6000_core *dev, int vol) +{ + u8 vol_reg; + + vol_reg = (vol + 0x10) & 0x1f; + + if (dev->dev_type == TM6010) { + tm6000_set_reg(dev, TM6010_REQ08_RF2_LEFT_CHANNEL_VOL, vol_reg); + tm6000_set_reg(dev, TM6010_REQ08_RF3_RIGHT_CHANNEL_VOL, vol_reg); + } else { + tm6000_set_reg(dev, TM6000_REQ07_REC_VADC_AADC_LVOL, vol_reg); + tm6000_set_reg(dev, TM6000_REQ07_RED_VADC_AADC_RVOL, vol_reg); + } +} + +void tm6000_set_volume(struct tm6000_core *dev, int vol) +{ + enum tm6000_mux mux; + + if (dev->radio) { + mux = dev->rinput.amux; + vol += 8; /* Offset to 0 dB */ + } else + mux = dev->vinput[dev->input].amux; + + switch (mux) { + case TM6000_AMUX_SIF1: + case TM6000_AMUX_SIF2: + if (dev->dev_type == TM6010) + tm6010_set_volume_sif(dev, vol); + else + printk(KERN_INFO "ERROR: TM5600 and TM6000 don't has SIF audio inputs. Please check the %s configuration.\n", + dev->name); + break; + case TM6000_AMUX_ADC1: + case TM6000_AMUX_ADC2: + tm6010_set_volume_adc(dev, vol); + break; + default: + break; + } +} + +static LIST_HEAD(tm6000_devlist); +static DEFINE_MUTEX(tm6000_devlist_mutex); + +/* + * tm6000_realease_resource() + */ + +void tm6000_remove_from_devlist(struct tm6000_core *dev) +{ + mutex_lock(&tm6000_devlist_mutex); + list_del(&dev->devlist); + mutex_unlock(&tm6000_devlist_mutex); +}; + +void tm6000_add_into_devlist(struct tm6000_core *dev) +{ + mutex_lock(&tm6000_devlist_mutex); + list_add_tail(&dev->devlist, &tm6000_devlist); + mutex_unlock(&tm6000_devlist_mutex); +}; + +/* + * Extension interface + */ + +static LIST_HEAD(tm6000_extension_devlist); + +int tm6000_call_fillbuf(struct tm6000_core *dev, enum tm6000_ops_type type, + char *buf, int size) +{ + struct tm6000_ops *ops = NULL; + + /* FIXME: tm6000_extension_devlist_lock should be a spinlock */ + + list_for_each_entry(ops, &tm6000_extension_devlist, next) { + if (ops->fillbuf && ops->type == type) + ops->fillbuf(dev, buf, size); + } + + return 0; +} + +int tm6000_register_extension(struct tm6000_ops *ops) +{ + struct tm6000_core *dev = NULL; + + mutex_lock(&tm6000_devlist_mutex); + list_add_tail(&ops->next, &tm6000_extension_devlist); + list_for_each_entry(dev, &tm6000_devlist, devlist) { + ops->init(dev); + printk(KERN_INFO "%s: Initialized (%s) extension\n", + dev->name, ops->name); + } + mutex_unlock(&tm6000_devlist_mutex); + return 0; +} +EXPORT_SYMBOL(tm6000_register_extension); + +void tm6000_unregister_extension(struct tm6000_ops *ops) +{ + struct tm6000_core *dev = NULL; + + mutex_lock(&tm6000_devlist_mutex); + list_for_each_entry(dev, &tm6000_devlist, devlist) + ops->fini(dev); + + printk(KERN_INFO "tm6000: Remove (%s) extension\n", ops->name); + list_del(&ops->next); + mutex_unlock(&tm6000_devlist_mutex); +} +EXPORT_SYMBOL(tm6000_unregister_extension); + +void tm6000_init_extension(struct tm6000_core *dev) +{ + struct tm6000_ops *ops = NULL; + + mutex_lock(&tm6000_devlist_mutex); + list_for_each_entry(ops, &tm6000_extension_devlist, next) { + if (ops->init) + ops->init(dev); + } + mutex_unlock(&tm6000_devlist_mutex); +} + +void tm6000_close_extension(struct tm6000_core *dev) +{ + struct tm6000_ops *ops = NULL; + + mutex_lock(&tm6000_devlist_mutex); + list_for_each_entry(ops, &tm6000_extension_devlist, next) { + if (ops->fini) + ops->fini(dev); + } + mutex_unlock(&tm6000_devlist_mutex); +} diff --git a/drivers/media/usb/tm6000/tm6000-dvb.c b/drivers/media/usb/tm6000/tm6000-dvb.c new file mode 100644 index 000000000..293a460f4 --- /dev/null +++ b/drivers/media/usb/tm6000/tm6000-dvb.c @@ -0,0 +1,456 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * tm6000-dvb.c - dvb-t support for TM5600/TM6000/TM6010 USB video capture devices + * + * Copyright (C) 2007 Michel Ludwig <michel.ludwig@gmail.com> + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/usb.h> + +#include "tm6000.h" +#include "tm6000-regs.h" + +#include "zl10353.h" + +#include <media/tuner.h> + +#include "tuner-xc2028.h" +#include "xc5000.h" + +MODULE_DESCRIPTION("DVB driver extension module for tm5600/6000/6010 based TV cards"); +MODULE_AUTHOR("Mauro Carvalho Chehab"); +MODULE_LICENSE("GPL"); + +MODULE_SUPPORTED_DEVICE("{{Trident, tm5600},{{Trident, tm6000},{{Trident, tm6010}"); + +static int debug; + +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "enable debug message"); + +static inline void print_err_status(struct tm6000_core *dev, + int packet, int status) +{ + char *errmsg = "Unknown"; + + switch (status) { + case -ENOENT: + errmsg = "unlinked synchronously"; + break; + case -ECONNRESET: + errmsg = "unlinked asynchronously"; + break; + case -ENOSR: + errmsg = "Buffer error (overrun)"; + break; + case -EPIPE: + errmsg = "Stalled (device not responding)"; + break; + case -EOVERFLOW: + errmsg = "Babble (bad cable?)"; + break; + case -EPROTO: + errmsg = "Bit-stuff error (bad cable?)"; + break; + case -EILSEQ: + errmsg = "CRC/Timeout (could be anything)"; + break; + case -ETIME: + errmsg = "Device does not respond"; + break; + } + if (packet < 0) { + dprintk(dev, 1, "URB status %d [%s].\n", + status, errmsg); + } else { + dprintk(dev, 1, "URB packet %d, status %d [%s].\n", + packet, status, errmsg); + } +} + +static void tm6000_urb_received(struct urb *urb) +{ + int ret; + struct tm6000_core *dev = urb->context; + + switch (urb->status) { + case 0: + case -ETIMEDOUT: + break; + case -ENOENT: + case -ECONNRESET: + case -ESHUTDOWN: + return; + default: + print_err_status(dev, 0, urb->status); + } + + if (urb->actual_length > 0) + dvb_dmx_swfilter(&dev->dvb->demux, urb->transfer_buffer, + urb->actual_length); + + if (dev->dvb->streams > 0) { + ret = usb_submit_urb(urb, GFP_ATOMIC); + if (ret < 0) { + printk(KERN_ERR "tm6000: error %s\n", __func__); + kfree(urb->transfer_buffer); + usb_free_urb(urb); + dev->dvb->bulk_urb = NULL; + } + } +} + +static int tm6000_start_stream(struct tm6000_core *dev) +{ + int ret; + unsigned int pipe, size; + struct tm6000_dvb *dvb = dev->dvb; + + printk(KERN_INFO "tm6000: got start stream request %s\n", __func__); + + if (dev->mode != TM6000_MODE_DIGITAL) { + tm6000_init_digital_mode(dev); + dev->mode = TM6000_MODE_DIGITAL; + } + + dvb->bulk_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!dvb->bulk_urb) + return -ENOMEM; + + pipe = usb_rcvbulkpipe(dev->udev, dev->bulk_in.endp->desc.bEndpointAddress + & USB_ENDPOINT_NUMBER_MASK); + + size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe)); + size = size * 15; /* 512 x 8 or 12 or 15 */ + + dvb->bulk_urb->transfer_buffer = kzalloc(size, GFP_KERNEL); + if (!dvb->bulk_urb->transfer_buffer) { + usb_free_urb(dvb->bulk_urb); + dvb->bulk_urb = NULL; + return -ENOMEM; + } + + usb_fill_bulk_urb(dvb->bulk_urb, dev->udev, pipe, + dvb->bulk_urb->transfer_buffer, + size, + tm6000_urb_received, dev); + + ret = usb_clear_halt(dev->udev, pipe); + if (ret < 0) { + printk(KERN_ERR "tm6000: error %i in %s during pipe reset\n", + ret, __func__); + + kfree(dvb->bulk_urb->transfer_buffer); + usb_free_urb(dvb->bulk_urb); + dvb->bulk_urb = NULL; + return ret; + } else + printk(KERN_ERR "tm6000: pipe reset\n"); + +/* mutex_lock(&tm6000_driver.open_close_mutex); */ + ret = usb_submit_urb(dvb->bulk_urb, GFP_ATOMIC); + +/* mutex_unlock(&tm6000_driver.open_close_mutex); */ + if (ret) { + printk(KERN_ERR "tm6000: submit of urb failed (error=%i)\n", + ret); + + kfree(dvb->bulk_urb->transfer_buffer); + usb_free_urb(dvb->bulk_urb); + dvb->bulk_urb = NULL; + return ret; + } + + return 0; +} + +static void tm6000_stop_stream(struct tm6000_core *dev) +{ + struct tm6000_dvb *dvb = dev->dvb; + + if (dvb->bulk_urb) { + printk(KERN_INFO "urb killing\n"); + usb_kill_urb(dvb->bulk_urb); + printk(KERN_INFO "urb buffer free\n"); + kfree(dvb->bulk_urb->transfer_buffer); + usb_free_urb(dvb->bulk_urb); + dvb->bulk_urb = NULL; + } +} + +static int tm6000_start_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct tm6000_core *dev = demux->priv; + struct tm6000_dvb *dvb = dev->dvb; + printk(KERN_INFO "tm6000: got start feed request %s\n", __func__); + + mutex_lock(&dvb->mutex); + if (dvb->streams == 0) { + dvb->streams = 1; +/* mutex_init(&tm6000_dev->streming_mutex); */ + tm6000_start_stream(dev); + } else + ++(dvb->streams); + mutex_unlock(&dvb->mutex); + + return 0; +} + +static int tm6000_stop_feed(struct dvb_demux_feed *feed) +{ + struct dvb_demux *demux = feed->demux; + struct tm6000_core *dev = demux->priv; + struct tm6000_dvb *dvb = dev->dvb; + + printk(KERN_INFO "tm6000: got stop feed request %s\n", __func__); + + mutex_lock(&dvb->mutex); + + printk(KERN_INFO "stream %#x\n", dvb->streams); + --(dvb->streams); + if (dvb->streams == 0) { + printk(KERN_INFO "stop stream\n"); + tm6000_stop_stream(dev); +/* mutex_destroy(&tm6000_dev->streaming_mutex); */ + } + mutex_unlock(&dvb->mutex); +/* mutex_destroy(&tm6000_dev->streaming_mutex); */ + + return 0; +} + +static int tm6000_dvb_attach_frontend(struct tm6000_core *dev) +{ + struct tm6000_dvb *dvb = dev->dvb; + + if (dev->caps.has_zl10353) { + struct zl10353_config config = { + .demod_address = dev->demod_addr, + .no_tuner = 1, + .parallel_ts = 1, + .if2 = 45700, + .disable_i2c_gate_ctrl = 1, + }; + + dvb->frontend = dvb_attach(zl10353_attach, &config, + &dev->i2c_adap); + } else { + printk(KERN_ERR "tm6000: no frontend defined for the device!\n"); + return -1; + } + + return (!dvb->frontend) ? -1 : 0; +} + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +static int register_dvb(struct tm6000_core *dev) +{ + int ret = -1; + struct tm6000_dvb *dvb = dev->dvb; + + mutex_init(&dvb->mutex); + + dvb->streams = 0; + + /* attach the frontend */ + ret = tm6000_dvb_attach_frontend(dev); + if (ret < 0) { + printk(KERN_ERR "tm6000: couldn't attach the frontend!\n"); + goto err; + } + + ret = dvb_register_adapter(&dvb->adapter, "Trident TVMaster 6000 DVB-T", + THIS_MODULE, &dev->udev->dev, adapter_nr); + if (ret < 0) { + pr_err("tm6000: couldn't register the adapter!\n"); + goto err; + } + + dvb->adapter.priv = dev; + + if (dvb->frontend) { + switch (dev->tuner_type) { + case TUNER_XC2028: { + struct xc2028_config cfg = { + .i2c_adap = &dev->i2c_adap, + .i2c_addr = dev->tuner_addr, + }; + + dvb->frontend->callback = tm6000_tuner_callback; + ret = dvb_register_frontend(&dvb->adapter, dvb->frontend); + if (ret < 0) { + printk(KERN_ERR + "tm6000: couldn't register frontend\n"); + goto adapter_err; + } + + if (!dvb_attach(xc2028_attach, dvb->frontend, &cfg)) { + printk(KERN_ERR "tm6000: couldn't register frontend (xc3028)\n"); + ret = -EINVAL; + goto frontend_err; + } + printk(KERN_INFO "tm6000: XC2028/3028 asked to be attached to frontend!\n"); + break; + } + case TUNER_XC5000: { + struct xc5000_config cfg = { + .i2c_address = dev->tuner_addr, + }; + + dvb->frontend->callback = tm6000_xc5000_callback; + ret = dvb_register_frontend(&dvb->adapter, dvb->frontend); + if (ret < 0) { + printk(KERN_ERR + "tm6000: couldn't register frontend\n"); + goto adapter_err; + } + + if (!dvb_attach(xc5000_attach, dvb->frontend, &dev->i2c_adap, &cfg)) { + printk(KERN_ERR "tm6000: couldn't register frontend (xc5000)\n"); + ret = -EINVAL; + goto frontend_err; + } + printk(KERN_INFO "tm6000: XC5000 asked to be attached to frontend!\n"); + break; + } + } + } else + printk(KERN_ERR "tm6000: no frontend found\n"); + + dvb->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING + | DMX_MEMORY_BASED_FILTERING; + dvb->demux.priv = dev; + dvb->demux.filternum = 8; + dvb->demux.feednum = 8; + dvb->demux.start_feed = tm6000_start_feed; + dvb->demux.stop_feed = tm6000_stop_feed; + dvb->demux.write_to_decoder = NULL; + ret = dvb_dmx_init(&dvb->demux); + if (ret < 0) { + printk(KERN_ERR "tm6000: dvb_dmx_init failed (errno = %d)\n", ret); + goto frontend_err; + } + + dvb->dmxdev.filternum = dev->dvb->demux.filternum; + dvb->dmxdev.demux = &dev->dvb->demux.dmx; + dvb->dmxdev.capabilities = 0; + + ret = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter); + if (ret < 0) { + printk(KERN_ERR "tm6000: dvb_dmxdev_init failed (errno = %d)\n", ret); + goto dvb_dmx_err; + } + + return 0; + +dvb_dmx_err: + dvb_dmx_release(&dvb->demux); +frontend_err: + if (dvb->frontend) { + dvb_unregister_frontend(dvb->frontend); + dvb_frontend_detach(dvb->frontend); + } +adapter_err: + dvb_unregister_adapter(&dvb->adapter); +err: + return ret; +} + +static void unregister_dvb(struct tm6000_core *dev) +{ + struct tm6000_dvb *dvb = dev->dvb; + + if (dvb->bulk_urb) { + struct urb *bulk_urb = dvb->bulk_urb; + + kfree(bulk_urb->transfer_buffer); + bulk_urb->transfer_buffer = NULL; + usb_unlink_urb(bulk_urb); + usb_free_urb(bulk_urb); + } + +/* mutex_lock(&tm6000_driver.open_close_mutex); */ + if (dvb->frontend) { + dvb_unregister_frontend(dvb->frontend); + dvb_frontend_detach(dvb->frontend); + } + + dvb_dmxdev_release(&dvb->dmxdev); + dvb_dmx_release(&dvb->demux); + dvb_unregister_adapter(&dvb->adapter); + mutex_destroy(&dvb->mutex); +/* mutex_unlock(&tm6000_driver.open_close_mutex); */ +} + +static int dvb_init(struct tm6000_core *dev) +{ + struct tm6000_dvb *dvb; + int rc; + + if (!dev) + return 0; + + if (!dev->caps.has_dvb) + return 0; + + if (dev->udev->speed == USB_SPEED_FULL) { + printk(KERN_INFO "This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter)\n"); + return 0; + } + + dvb = kzalloc(sizeof(struct tm6000_dvb), GFP_KERNEL); + if (!dvb) + return -ENOMEM; + + dev->dvb = dvb; + + rc = register_dvb(dev); + if (rc < 0) { + kfree(dvb); + dev->dvb = NULL; + return 0; + } + + return 0; +} + +static int dvb_fini(struct tm6000_core *dev) +{ + if (!dev) + return 0; + + if (!dev->caps.has_dvb) + return 0; + + if (dev->dvb) { + unregister_dvb(dev); + kfree(dev->dvb); + dev->dvb = NULL; + } + + return 0; +} + +static struct tm6000_ops dvb_ops = { + .type = TM6000_DVB, + .name = "TM6000 dvb Extension", + .init = dvb_init, + .fini = dvb_fini, +}; + +static int __init tm6000_dvb_register(void) +{ + return tm6000_register_extension(&dvb_ops); +} + +static void __exit tm6000_dvb_unregister(void) +{ + tm6000_unregister_extension(&dvb_ops); +} + +module_init(tm6000_dvb_register); +module_exit(tm6000_dvb_unregister); diff --git a/drivers/media/usb/tm6000/tm6000-i2c.c b/drivers/media/usb/tm6000/tm6000-i2c.c new file mode 100644 index 000000000..b37782d6f --- /dev/null +++ b/drivers/media/usb/tm6000/tm6000-i2c.c @@ -0,0 +1,317 @@ +// SPDX-License-Identifier: GPL-2.0 +// tm6000-i2c.c - driver for TM5600/TM6000/TM6010 USB video capture devices +// +// Copyright (c) 2006-2007 Mauro Carvalho Chehab <mchehab@kernel.org> +// +// Copyright (c) 2007 Michel Ludwig <michel.ludwig@gmail.com> +// - Fix SMBus Read Byte command + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/usb.h> +#include <linux/i2c.h> + +#include "tm6000.h" +#include "tm6000-regs.h" +#include <media/v4l2-common.h> +#include <media/tuner.h> +#include "tuner-xc2028.h" + + +/* ----------------------------------------------------------- */ + +static unsigned int i2c_debug; +module_param(i2c_debug, int, 0644); +MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]"); + +#define i2c_dprintk(lvl, fmt, args...) if (i2c_debug >= lvl) do { \ + printk(KERN_DEBUG "%s at %s: " fmt, \ + dev->name, __func__, ##args); } while (0) + +static int tm6000_i2c_send_regs(struct tm6000_core *dev, unsigned char addr, + __u8 reg, char *buf, int len) +{ + int rc; + unsigned int i2c_packet_limit = 16; + + if (dev->dev_type == TM6010) + i2c_packet_limit = 80; + + if (!buf) + return -1; + + if (len < 1 || len > i2c_packet_limit) { + printk(KERN_ERR "Incorrect length of i2c packet = %d, limit set to %d\n", + len, i2c_packet_limit); + return -1; + } + + /* capture mutex */ + rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_DEVICE, REQ_16_SET_GET_I2C_WR1_RDN, + addr | reg << 8, 0, buf, len); + + if (rc < 0) { + /* release mutex */ + return rc; + } + + /* release mutex */ + return rc; +} + +/* Generic read - doesn't work fine with 16bit registers */ +static int tm6000_i2c_recv_regs(struct tm6000_core *dev, unsigned char addr, + __u8 reg, char *buf, int len) +{ + int rc; + u8 b[2]; + unsigned int i2c_packet_limit = 16; + + if (dev->dev_type == TM6010) + i2c_packet_limit = 64; + + if (!buf) + return -1; + + if (len < 1 || len > i2c_packet_limit) { + printk(KERN_ERR "Incorrect length of i2c packet = %d, limit set to %d\n", + len, i2c_packet_limit); + return -1; + } + + /* capture mutex */ + if ((dev->caps.has_zl10353) && (dev->demod_addr << 1 == addr) && (reg % 2 == 0)) { + /* + * Workaround an I2C bug when reading from zl10353 + */ + reg -= 1; + len += 1; + + rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + REQ_16_SET_GET_I2C_WR1_RDN, addr | reg << 8, 0, b, len); + + *buf = b[1]; + } else { + rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + REQ_16_SET_GET_I2C_WR1_RDN, addr | reg << 8, 0, buf, len); + } + + /* release mutex */ + return rc; +} + +/* + * read from a 16bit register + * for example xc2028, xc3028 or xc3028L + */ +static int tm6000_i2c_recv_regs16(struct tm6000_core *dev, unsigned char addr, + __u16 reg, char *buf, int len) +{ + int rc; + unsigned char ureg; + + if (!buf || len != 2) + return -1; + + /* capture mutex */ + if (dev->dev_type == TM6010) { + ureg = reg & 0xFF; + rc = tm6000_read_write_usb(dev, USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_DEVICE, REQ_16_SET_GET_I2C_WR1_RDN, + addr | (reg & 0xFF00), 0, &ureg, 1); + + if (rc < 0) { + /* release mutex */ + return rc; + } + + rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR | + USB_RECIP_DEVICE, REQ_35_AFTEK_TUNER_READ, + reg, 0, buf, len); + } else { + rc = tm6000_read_write_usb(dev, USB_DIR_IN | USB_TYPE_VENDOR | + USB_RECIP_DEVICE, REQ_14_SET_GET_I2C_WR2_RDN, + addr, reg, buf, len); + } + + /* release mutex */ + return rc; +} + +static int tm6000_i2c_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg msgs[], int num) +{ + struct tm6000_core *dev = i2c_adap->algo_data; + int addr, rc, i, byte; + + for (i = 0; i < num; i++) { + addr = (msgs[i].addr << 1) & 0xff; + i2c_dprintk(2, "%s %s addr=0x%x len=%d:", + (msgs[i].flags & I2C_M_RD) ? "read" : "write", + i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len); + if (msgs[i].flags & I2C_M_RD) { + /* read request without preceding register selection */ + /* + * The TM6000 only supports a read transaction + * immediately after a 1 or 2 byte write to select + * a register. We cannot fulfill this request. + */ + i2c_dprintk(2, " read without preceding write not supported"); + rc = -EOPNOTSUPP; + goto err; + } else if (i + 1 < num && msgs[i].len <= 2 && + (msgs[i + 1].flags & I2C_M_RD) && + msgs[i].addr == msgs[i + 1].addr) { + /* 1 or 2 byte write followed by a read */ + if (i2c_debug >= 2) + for (byte = 0; byte < msgs[i].len; byte++) + printk(KERN_CONT " %02x", msgs[i].buf[byte]); + i2c_dprintk(2, "; joined to read %s len=%d:", + i == num - 2 ? "stop" : "nonstop", + msgs[i + 1].len); + + if (msgs[i].len == 2) { + rc = tm6000_i2c_recv_regs16(dev, addr, + msgs[i].buf[0] << 8 | msgs[i].buf[1], + msgs[i + 1].buf, msgs[i + 1].len); + } else { + rc = tm6000_i2c_recv_regs(dev, addr, msgs[i].buf[0], + msgs[i + 1].buf, msgs[i + 1].len); + } + + i++; + + if (addr == dev->tuner_addr << 1) { + tm6000_set_reg(dev, REQ_50_SET_START, 0, 0); + tm6000_set_reg(dev, REQ_51_SET_STOP, 0, 0); + } + if (i2c_debug >= 2) + for (byte = 0; byte < msgs[i].len; byte++) + printk(KERN_CONT " %02x", msgs[i].buf[byte]); + } else { + /* write bytes */ + if (i2c_debug >= 2) + for (byte = 0; byte < msgs[i].len; byte++) + printk(KERN_CONT " %02x", msgs[i].buf[byte]); + rc = tm6000_i2c_send_regs(dev, addr, msgs[i].buf[0], + msgs[i].buf + 1, msgs[i].len - 1); + } + if (i2c_debug >= 2) + printk(KERN_CONT "\n"); + if (rc < 0) + goto err; + } + + return num; +err: + i2c_dprintk(2, " ERROR: %i\n", rc); + return rc; +} + +static int tm6000_i2c_eeprom(struct tm6000_core *dev) +{ + int i, rc; + unsigned char *p = dev->eedata; + unsigned char bytes[17]; + + dev->i2c_client.addr = 0xa0 >> 1; + dev->eedata_size = 0; + + bytes[16] = '\0'; + for (i = 0; i < sizeof(dev->eedata); ) { + *p = i; + rc = tm6000_i2c_recv_regs(dev, 0xa0, i, p, 1); + if (rc < 1) { + if (p == dev->eedata) + goto noeeprom; + else { + printk(KERN_WARNING + "%s: i2c eeprom read error (err=%d)\n", + dev->name, rc); + } + return -EINVAL; + } + dev->eedata_size++; + p++; + if (0 == (i % 16)) + printk(KERN_INFO "%s: i2c eeprom %02x:", dev->name, i); + printk(KERN_CONT " %02x", dev->eedata[i]); + if ((dev->eedata[i] >= ' ') && (dev->eedata[i] <= 'z')) + bytes[i%16] = dev->eedata[i]; + else + bytes[i%16] = '.'; + + i++; + + if (0 == (i % 16)) { + bytes[16] = '\0'; + printk(KERN_CONT " %s\n", bytes); + } + } + if (0 != (i%16)) { + bytes[i%16] = '\0'; + for (i %= 16; i < 16; i++) + printk(KERN_CONT " "); + printk(KERN_CONT " %s\n", bytes); + } + + return 0; + +noeeprom: + printk(KERN_INFO "%s: Huh, no eeprom present (err=%d)?\n", + dev->name, rc); + return -EINVAL; +} + +/* ----------------------------------------------------------- */ + +/* + * functionality() + */ +static u32 functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_SMBUS_EMUL; +} + +static const struct i2c_algorithm tm6000_algo = { + .master_xfer = tm6000_i2c_xfer, + .functionality = functionality, +}; + +/* ----------------------------------------------------------- */ + +/* + * tm6000_i2c_register() + * register i2c bus + */ +int tm6000_i2c_register(struct tm6000_core *dev) +{ + int rc; + + dev->i2c_adap.owner = THIS_MODULE; + dev->i2c_adap.algo = &tm6000_algo; + dev->i2c_adap.dev.parent = &dev->udev->dev; + strscpy(dev->i2c_adap.name, dev->name, sizeof(dev->i2c_adap.name)); + dev->i2c_adap.algo_data = dev; + i2c_set_adapdata(&dev->i2c_adap, &dev->v4l2_dev); + rc = i2c_add_adapter(&dev->i2c_adap); + if (rc) + return rc; + + dev->i2c_client.adapter = &dev->i2c_adap; + strscpy(dev->i2c_client.name, "tm6000 internal", I2C_NAME_SIZE); + tm6000_i2c_eeprom(dev); + + return 0; +} + +/* + * tm6000_i2c_unregister() + * unregister i2c_bus + */ +int tm6000_i2c_unregister(struct tm6000_core *dev) +{ + i2c_del_adapter(&dev->i2c_adap); + return 0; +} diff --git a/drivers/media/usb/tm6000/tm6000-input.c b/drivers/media/usb/tm6000/tm6000-input.c new file mode 100644 index 000000000..84602edf3 --- /dev/null +++ b/drivers/media/usb/tm6000/tm6000-input.c @@ -0,0 +1,503 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * tm6000-input.c - driver for TM5600/TM6000/TM6010 USB video capture devices + * + * Copyright (C) 2010 Stefan Ringel <stefan.ringel@arcor.de> + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> + +#include <linux/input.h> +#include <linux/usb.h> + +#include <media/rc-core.h> + +#include "tm6000.h" +#include "tm6000-regs.h" + +static unsigned int ir_debug; +module_param(ir_debug, int, 0644); +MODULE_PARM_DESC(ir_debug, "debug message level"); + +static unsigned int enable_ir = 1; +module_param(enable_ir, int, 0644); +MODULE_PARM_DESC(enable_ir, "enable ir (default is enable)"); + +static unsigned int ir_clock_mhz = 12; +module_param(ir_clock_mhz, int, 0644); +MODULE_PARM_DESC(ir_clock_mhz, "ir clock, in MHz"); + +#define URB_SUBMIT_DELAY 100 /* ms - Delay to submit an URB request on retrial and init */ +#define URB_INT_LED_DELAY 100 /* ms - Delay to turn led on again on int mode */ + +#undef dprintk + +#define dprintk(level, fmt, arg...) do {\ + if (ir_debug >= level) \ + printk(KERN_DEBUG "%s/ir: " fmt, ir->name , ## arg); \ + } while (0) + +struct tm6000_ir_poll_result { + u16 rc_data; +}; + +struct tm6000_IR { + struct tm6000_core *dev; + struct rc_dev *rc; + char name[32]; + char phys[32]; + + /* poll expernal decoder */ + int polling; + struct delayed_work work; + u8 wait:1; + u8 pwled:2; + u8 submit_urb:1; + struct urb *int_urb; + + /* IR device properties */ + u64 rc_proto; +}; + +void tm6000_ir_wait(struct tm6000_core *dev, u8 state) +{ + struct tm6000_IR *ir = dev->ir; + + if (!dev->ir) + return; + + dprintk(2, "%s: %i\n",__func__, ir->wait); + + if (state) + ir->wait = 1; + else + ir->wait = 0; +} + +static int tm6000_ir_config(struct tm6000_IR *ir) +{ + struct tm6000_core *dev = ir->dev; + u32 pulse = 0, leader = 0; + + dprintk(2, "%s\n",__func__); + + /* + * The IR decoder supports RC-5 or NEC, with a configurable timing. + * The timing configuration there is not that accurate, as it uses + * approximate values. The NEC spec mentions a 562.5 unit period, + * and RC-5 uses a 888.8 period. + * Currently, driver assumes a clock provided by a 12 MHz XTAL, but + * a modprobe parameter can adjust it. + * Adjustments are required for other timings. + * It seems that the 900ms timing for NEC is used to detect a RC-5 + * IR, in order to discard such decoding + */ + + switch (ir->rc_proto) { + case RC_PROTO_BIT_NEC: + leader = 900; /* ms */ + pulse = 700; /* ms - the actual value would be 562 */ + break; + default: + case RC_PROTO_BIT_RC5: + leader = 900; /* ms - from the NEC decoding */ + pulse = 1780; /* ms - The actual value would be 1776 */ + break; + } + + pulse = ir_clock_mhz * pulse; + leader = ir_clock_mhz * leader; + if (ir->rc_proto == RC_PROTO_BIT_NEC) + leader = leader | 0x8000; + + dprintk(2, "%s: %s, %d MHz, leader = 0x%04x, pulse = 0x%06x \n", + __func__, + (ir->rc_proto == RC_PROTO_BIT_NEC) ? "NEC" : "RC-5", + ir_clock_mhz, leader, pulse); + + /* Remote WAKEUP = enable, normal mode, from IR decoder output */ + tm6000_set_reg(dev, TM6010_REQ07_RE5_REMOTE_WAKEUP, 0xfe); + + /* Enable IR reception on non-busrt mode */ + tm6000_set_reg(dev, TM6010_REQ07_RD8_IR, 0x2f); + + /* IR_WKUP_SEL = Low byte in decoded IR data */ + tm6000_set_reg(dev, TM6010_REQ07_RDA_IR_WAKEUP_SEL, 0xff); + /* IR_WKU_ADD code */ + tm6000_set_reg(dev, TM6010_REQ07_RDB_IR_WAKEUP_ADD, 0xff); + + tm6000_set_reg(dev, TM6010_REQ07_RDC_IR_LEADER1, leader >> 8); + tm6000_set_reg(dev, TM6010_REQ07_RDD_IR_LEADER0, leader); + + tm6000_set_reg(dev, TM6010_REQ07_RDE_IR_PULSE_CNT1, pulse >> 8); + tm6000_set_reg(dev, TM6010_REQ07_RDF_IR_PULSE_CNT0, pulse); + + if (!ir->polling) + tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0); + else + tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 1); + msleep(10); + + /* Shows that IR is working via the LED */ + tm6000_flash_led(dev, 0); + msleep(100); + tm6000_flash_led(dev, 1); + ir->pwled = 1; + + return 0; +} + +static void tm6000_ir_keydown(struct tm6000_IR *ir, + const char *buf, unsigned int len) +{ + u8 device, command; + u32 scancode; + enum rc_proto protocol; + + if (len < 1) + return; + + command = buf[0]; + device = (len > 1 ? buf[1] : 0x0); + switch (ir->rc_proto) { + case RC_PROTO_BIT_RC5: + protocol = RC_PROTO_RC5; + scancode = RC_SCANCODE_RC5(device, command); + break; + case RC_PROTO_BIT_NEC: + protocol = RC_PROTO_NEC; + scancode = RC_SCANCODE_NEC(device, command); + break; + default: + protocol = RC_PROTO_OTHER; + scancode = RC_SCANCODE_OTHER(device << 8 | command); + break; + } + + dprintk(1, "%s, protocol: 0x%04x, scancode: 0x%08x\n", + __func__, protocol, scancode); + rc_keydown(ir->rc, protocol, scancode, 0); +} + +static void tm6000_ir_urb_received(struct urb *urb) +{ + struct tm6000_core *dev = urb->context; + struct tm6000_IR *ir = dev->ir; + char *buf; + + dprintk(2, "%s\n",__func__); + if (urb->status < 0 || urb->actual_length <= 0) { + printk(KERN_INFO "tm6000: IR URB failure: status: %i, length %i\n", + urb->status, urb->actual_length); + ir->submit_urb = 1; + schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_SUBMIT_DELAY)); + return; + } + buf = urb->transfer_buffer; + + if (ir_debug) + print_hex_dump(KERN_DEBUG, "tm6000: IR data: ", + DUMP_PREFIX_OFFSET,16, 1, + buf, urb->actual_length, false); + + tm6000_ir_keydown(ir, urb->transfer_buffer, urb->actual_length); + + usb_submit_urb(urb, GFP_ATOMIC); + /* + * Flash the led. We can't do it here, as it is running on IRQ context. + * So, use the scheduler to do it, in a few ms. + */ + ir->pwled = 2; + schedule_delayed_work(&ir->work, msecs_to_jiffies(10)); +} + +static void tm6000_ir_handle_key(struct work_struct *work) +{ + struct tm6000_IR *ir = container_of(work, struct tm6000_IR, work.work); + struct tm6000_core *dev = ir->dev; + int rc; + u8 buf[2]; + + if (ir->wait) + return; + + dprintk(3, "%s\n",__func__); + + rc = tm6000_read_write_usb(dev, USB_DIR_IN | + USB_TYPE_VENDOR | USB_RECIP_DEVICE, + REQ_02_GET_IR_CODE, 0, 0, buf, 2); + if (rc < 0) + return; + + /* Check if something was read */ + if ((buf[0] & 0xff) == 0xff) { + if (!ir->pwled) { + tm6000_flash_led(dev, 1); + ir->pwled = 1; + } + return; + } + + tm6000_ir_keydown(ir, buf, rc); + tm6000_flash_led(dev, 0); + ir->pwled = 0; + + /* Re-schedule polling */ + schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling)); +} + +static void tm6000_ir_int_work(struct work_struct *work) +{ + struct tm6000_IR *ir = container_of(work, struct tm6000_IR, work.work); + struct tm6000_core *dev = ir->dev; + int rc; + + dprintk(3, "%s, submit_urb = %d, pwled = %d\n",__func__, ir->submit_urb, + ir->pwled); + + if (ir->submit_urb) { + dprintk(3, "Resubmit urb\n"); + tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT, 2, 0); + + rc = usb_submit_urb(ir->int_urb, GFP_ATOMIC); + if (rc < 0) { + printk(KERN_ERR "tm6000: Can't submit an IR interrupt. Error %i\n", + rc); + /* Retry in 100 ms */ + schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_SUBMIT_DELAY)); + return; + } + ir->submit_urb = 0; + } + + /* Led is enabled only if USB submit doesn't fail */ + if (ir->pwled == 2) { + tm6000_flash_led(dev, 0); + ir->pwled = 0; + schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_INT_LED_DELAY)); + } else if (!ir->pwled) { + tm6000_flash_led(dev, 1); + ir->pwled = 1; + } +} + +static int tm6000_ir_start(struct rc_dev *rc) +{ + struct tm6000_IR *ir = rc->priv; + + dprintk(2, "%s\n",__func__); + + schedule_delayed_work(&ir->work, 0); + + return 0; +} + +static void tm6000_ir_stop(struct rc_dev *rc) +{ + struct tm6000_IR *ir = rc->priv; + + dprintk(2, "%s\n",__func__); + + cancel_delayed_work_sync(&ir->work); +} + +static int tm6000_ir_change_protocol(struct rc_dev *rc, u64 *rc_proto) +{ + struct tm6000_IR *ir = rc->priv; + + if (!ir) + return 0; + + dprintk(2, "%s\n",__func__); + + ir->rc_proto = *rc_proto; + + tm6000_ir_config(ir); + /* TODO */ + return 0; +} + +static int __tm6000_ir_int_start(struct rc_dev *rc) +{ + struct tm6000_IR *ir = rc->priv; + struct tm6000_core *dev; + int pipe, size; + int err = -ENOMEM; + + if (!ir) + return -ENODEV; + dev = ir->dev; + + dprintk(2, "%s\n",__func__); + + ir->int_urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!ir->int_urb) + return -ENOMEM; + + pipe = usb_rcvintpipe(dev->udev, + dev->int_in.endp->desc.bEndpointAddress + & USB_ENDPOINT_NUMBER_MASK); + + size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe)); + dprintk(1, "IR max size: %d\n", size); + + ir->int_urb->transfer_buffer = kzalloc(size, GFP_ATOMIC); + if (!ir->int_urb->transfer_buffer) { + usb_free_urb(ir->int_urb); + return err; + } + dprintk(1, "int interval: %d\n", dev->int_in.endp->desc.bInterval); + + usb_fill_int_urb(ir->int_urb, dev->udev, pipe, + ir->int_urb->transfer_buffer, size, + tm6000_ir_urb_received, dev, + dev->int_in.endp->desc.bInterval); + + ir->submit_urb = 1; + schedule_delayed_work(&ir->work, msecs_to_jiffies(URB_SUBMIT_DELAY)); + + return 0; +} + +static void __tm6000_ir_int_stop(struct rc_dev *rc) +{ + struct tm6000_IR *ir = rc->priv; + + if (!ir || !ir->int_urb) + return; + + dprintk(2, "%s\n",__func__); + + usb_kill_urb(ir->int_urb); + kfree(ir->int_urb->transfer_buffer); + usb_free_urb(ir->int_urb); + ir->int_urb = NULL; +} + +int tm6000_ir_int_start(struct tm6000_core *dev) +{ + struct tm6000_IR *ir = dev->ir; + + if (!ir) + return 0; + + return __tm6000_ir_int_start(ir->rc); +} + +void tm6000_ir_int_stop(struct tm6000_core *dev) +{ + struct tm6000_IR *ir = dev->ir; + + if (!ir || !ir->rc) + return; + + __tm6000_ir_int_stop(ir->rc); +} + +int tm6000_ir_init(struct tm6000_core *dev) +{ + struct tm6000_IR *ir; + struct rc_dev *rc; + int err = -ENOMEM; + u64 rc_proto; + + if (!enable_ir) + return -ENODEV; + + if (!dev->caps.has_remote) + return 0; + + if (!dev->ir_codes) + return 0; + + ir = kzalloc(sizeof(*ir), GFP_ATOMIC); + rc = rc_allocate_device(RC_DRIVER_SCANCODE); + if (!ir || !rc) + goto out; + + dprintk(2, "%s\n", __func__); + + /* record handles to ourself */ + ir->dev = dev; + dev->ir = ir; + ir->rc = rc; + + /* input setup */ + rc->allowed_protocols = RC_PROTO_BIT_RC5 | RC_PROTO_BIT_NEC; + /* Needed, in order to support NEC remotes with 24 or 32 bits */ + rc->scancode_mask = 0xffff; + rc->priv = ir; + rc->change_protocol = tm6000_ir_change_protocol; + if (dev->int_in.endp) { + rc->open = __tm6000_ir_int_start; + rc->close = __tm6000_ir_int_stop; + INIT_DELAYED_WORK(&ir->work, tm6000_ir_int_work); + } else { + rc->open = tm6000_ir_start; + rc->close = tm6000_ir_stop; + ir->polling = 50; + INIT_DELAYED_WORK(&ir->work, tm6000_ir_handle_key); + } + + snprintf(ir->name, sizeof(ir->name), "tm5600/60x0 IR (%s)", + dev->name); + + usb_make_path(dev->udev, ir->phys, sizeof(ir->phys)); + strlcat(ir->phys, "/input0", sizeof(ir->phys)); + + rc_proto = RC_PROTO_BIT_UNKNOWN; + tm6000_ir_change_protocol(rc, &rc_proto); + + rc->device_name = ir->name; + rc->input_phys = ir->phys; + rc->input_id.bustype = BUS_USB; + rc->input_id.version = 1; + rc->input_id.vendor = le16_to_cpu(dev->udev->descriptor.idVendor); + rc->input_id.product = le16_to_cpu(dev->udev->descriptor.idProduct); + rc->map_name = dev->ir_codes; + rc->driver_name = "tm6000"; + rc->dev.parent = &dev->udev->dev; + + /* ir register */ + err = rc_register_device(rc); + if (err) + goto out; + + return 0; + +out: + dev->ir = NULL; + rc_free_device(rc); + kfree(ir); + return err; +} + +int tm6000_ir_fini(struct tm6000_core *dev) +{ + struct tm6000_IR *ir = dev->ir; + + /* skip detach on non attached board */ + + if (!ir) + return 0; + + dprintk(2, "%s\n",__func__); + + if (!ir->polling) + __tm6000_ir_int_stop(ir->rc); + + tm6000_ir_stop(ir->rc); + + /* Turn off the led */ + tm6000_flash_led(dev, 0); + ir->pwled = 0; + + rc_unregister_device(ir->rc); + + kfree(ir); + dev->ir = NULL; + + return 0; +} diff --git a/drivers/media/usb/tm6000/tm6000-regs.h b/drivers/media/usb/tm6000/tm6000-regs.h new file mode 100644 index 000000000..6a181f2e7 --- /dev/null +++ b/drivers/media/usb/tm6000/tm6000-regs.h @@ -0,0 +1,588 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * tm6000-regs.h - driver for TM5600/TM6000/TM6010 USB video capture devices + * + * Copyright (c) 2006-2007 Mauro Carvalho Chehab <mchehab@kernel.org> + */ + +/* + * Define TV Master TM5600/TM6000/TM6010 Request codes + */ +#define REQ_00_SET_IR_VALUE 0 +#define REQ_01_SET_WAKEUP_IRCODE 1 +#define REQ_02_GET_IR_CODE 2 +#define REQ_03_SET_GET_MCU_PIN 3 +#define REQ_04_EN_DISABLE_MCU_INT 4 +#define REQ_05_SET_GET_USBREG 5 + /* Write: RegNum, Value, 0 */ + /* Read : RegNum, Value, 1, RegStatus */ +#define REQ_06_SET_GET_USBREG_BIT 6 +#define REQ_07_SET_GET_AVREG 7 + /* Write: RegNum, Value, 0 */ + /* Read : RegNum, Value, 1, RegStatus */ +#define REQ_08_SET_GET_AVREG_BIT 8 +#define REQ_09_SET_GET_TUNER_FQ 9 +#define REQ_10_SET_TUNER_SYSTEM 10 +#define REQ_11_SET_EEPROM_ADDR 11 +#define REQ_12_SET_GET_EEPROMBYTE 12 +#define REQ_13_GET_EEPROM_SEQREAD 13 +#define REQ_14_SET_GET_I2C_WR2_RDN 14 +#define REQ_15_SET_GET_I2CBYTE 15 + /* Write: Subaddr, Slave Addr, value, 0 */ + /* Read : Subaddr, Slave Addr, value, 1 */ +#define REQ_16_SET_GET_I2C_WR1_RDN 16 + /* Subaddr, Slave Addr, 0, length */ +#define REQ_17_SET_GET_I2CFP 17 + /* Write: Slave Addr, register, value */ + /* Read : Slave Addr, register, 2, data */ +#define REQ_20_DATA_TRANSFER 20 +#define REQ_30_I2C_WRITE 30 +#define REQ_31_I2C_READ 31 +#define REQ_35_AFTEK_TUNER_READ 35 +#define REQ_40_GET_VERSION 40 +#define REQ_50_SET_START 50 +#define REQ_51_SET_STOP 51 +#define REQ_52_TRANSMIT_DATA 52 +#define REQ_53_SPI_INITIAL 53 +#define REQ_54_SPI_SETSTART 54 +#define REQ_55_SPI_INOUTDATA 55 +#define REQ_56_SPI_SETSTOP 56 + +/* + * Define TV Master TM5600/TM6000/TM6010 GPIO lines + */ + +#define TM6000_GPIO_CLK 0x101 +#define TM6000_GPIO_DATA 0x100 + +#define TM6000_GPIO_1 0x102 +#define TM6000_GPIO_2 0x103 +#define TM6000_GPIO_3 0x104 +#define TM6000_GPIO_4 0x300 +#define TM6000_GPIO_5 0x301 +#define TM6000_GPIO_6 0x304 +#define TM6000_GPIO_7 0x305 + +/* tm6010 defines GPIO with different values */ +#define TM6010_GPIO_0 0x0102 +#define TM6010_GPIO_1 0x0103 +#define TM6010_GPIO_2 0x0104 +#define TM6010_GPIO_3 0x0105 +#define TM6010_GPIO_4 0x0106 +#define TM6010_GPIO_5 0x0107 +#define TM6010_GPIO_6 0x0300 +#define TM6010_GPIO_7 0x0301 +#define TM6010_GPIO_9 0x0305 +/* + * Define TV Master TM5600/TM6000/TM6010 URB message codes and length + */ + +enum { + TM6000_URB_MSG_VIDEO = 1, + TM6000_URB_MSG_AUDIO, + TM6000_URB_MSG_VBI, + TM6000_URB_MSG_PTS, + TM6000_URB_MSG_ERR, +}; + +/* Define specific TM6000 Video decoder registers */ +#define TM6000_REQ07_RD8_TEST_SEL 0x07, 0xd8 +#define TM6000_REQ07_RD9_A_SIM_SEL 0x07, 0xd9 +#define TM6000_REQ07_RDA_CLK_SEL 0x07, 0xda +#define TM6000_REQ07_RDB_OUT_SEL 0x07, 0xdb +#define TM6000_REQ07_RDC_NSEL_I2S 0x07, 0xdc +#define TM6000_REQ07_RDD_GPIO2_MDRV 0x07, 0xdd +#define TM6000_REQ07_RDE_GPIO1_MDRV 0x07, 0xde +#define TM6000_REQ07_RDF_PWDOWN_ACLK 0x07, 0xdf +#define TM6000_REQ07_RE0_VADC_REF_CTL 0x07, 0xe0 +#define TM6000_REQ07_RE1_VADC_DACLIMP 0x07, 0xe1 +#define TM6000_REQ07_RE2_VADC_STATUS_CTL 0x07, 0xe2 +#define TM6000_REQ07_RE3_VADC_INP_LPF_SEL1 0x07, 0xe3 +#define TM6000_REQ07_RE4_VADC_TARGET1 0x07, 0xe4 +#define TM6000_REQ07_RE5_VADC_INP_LPF_SEL2 0x07, 0xe5 +#define TM6000_REQ07_RE6_VADC_TARGET2 0x07, 0xe6 +#define TM6000_REQ07_RE7_VADC_AGAIN_CTL 0x07, 0xe7 +#define TM6000_REQ07_RE8_VADC_PWDOWN_CTL 0x07, 0xe8 +#define TM6000_REQ07_RE9_VADC_INPUT_CTL1 0x07, 0xe9 +#define TM6000_REQ07_REA_VADC_INPUT_CTL2 0x07, 0xea +#define TM6000_REQ07_REB_VADC_AADC_MODE 0x07, 0xeb +#define TM6000_REQ07_REC_VADC_AADC_LVOL 0x07, 0xec +#define TM6000_REQ07_RED_VADC_AADC_RVOL 0x07, 0xed +#define TM6000_REQ07_REE_VADC_CTRL_SEL_CONTROL 0x07, 0xee +#define TM6000_REQ07_REF_VADC_GAIN_MAP_CTL 0x07, 0xef +#define TM6000_REQ07_RFD_BIST_ERR_VST_LOW 0x07, 0xfd +#define TM6000_REQ07_RFE_BIST_ERR_VST_HIGH 0x07, 0xfe + +/* Define TM6000/TM6010 Video decoder registers */ +#define TM6010_REQ07_R00_VIDEO_CONTROL0 0x07, 0x00 +#define TM6010_REQ07_R01_VIDEO_CONTROL1 0x07, 0x01 +#define TM6010_REQ07_R02_VIDEO_CONTROL2 0x07, 0x02 +#define TM6010_REQ07_R03_YC_SEP_CONTROL 0x07, 0x03 +#define TM6010_REQ07_R04_LUMA_HAGC_CONTROL 0x07, 0x04 +#define TM6010_REQ07_R05_NOISE_THRESHOLD 0x07, 0x05 +#define TM6010_REQ07_R06_AGC_GATE_THRESHOLD 0x07, 0x06 +#define TM6010_REQ07_R07_OUTPUT_CONTROL 0x07, 0x07 +#define TM6010_REQ07_R08_LUMA_CONTRAST_ADJ 0x07, 0x08 +#define TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ 0x07, 0x09 +#define TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ 0x07, 0x0a +#define TM6010_REQ07_R0B_CHROMA_HUE_PHASE_ADJ 0x07, 0x0b +#define TM6010_REQ07_R0C_CHROMA_AGC_CONTROL 0x07, 0x0c +#define TM6010_REQ07_R0D_CHROMA_KILL_LEVEL 0x07, 0x0d +#define TM6010_REQ07_R0F_CHROMA_AUTO_POSITION 0x07, 0x0f +#define TM6010_REQ07_R10_AGC_PEAK_NOMINAL 0x07, 0x10 +#define TM6010_REQ07_R11_AGC_PEAK_CONTROL 0x07, 0x11 +#define TM6010_REQ07_R12_AGC_GATE_STARTH 0x07, 0x12 +#define TM6010_REQ07_R13_AGC_GATE_STARTL 0x07, 0x13 +#define TM6010_REQ07_R14_AGC_GATE_WIDTH 0x07, 0x14 +#define TM6010_REQ07_R15_AGC_BP_DELAY 0x07, 0x15 +#define TM6010_REQ07_R16_LOCK_COUNT 0x07, 0x16 +#define TM6010_REQ07_R17_HLOOP_MAXSTATE 0x07, 0x17 +#define TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3 0x07, 0x18 +#define TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2 0x07, 0x19 +#define TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1 0x07, 0x1a +#define TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0 0x07, 0x1b +#define TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3 0x07, 0x1c +#define TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2 0x07, 0x1d +#define TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1 0x07, 0x1e +#define TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0 0x07, 0x1f +#define TM6010_REQ07_R20_HSYNC_RISING_EDGE_TIME 0x07, 0x20 +#define TM6010_REQ07_R21_HSYNC_PHASE_OFFSET 0x07, 0x21 +#define TM6010_REQ07_R22_HSYNC_PLL_START_TIME 0x07, 0x22 +#define TM6010_REQ07_R23_HSYNC_PLL_END_TIME 0x07, 0x23 +#define TM6010_REQ07_R24_HSYNC_TIP_START_TIME 0x07, 0x24 +#define TM6010_REQ07_R25_HSYNC_TIP_END_TIME 0x07, 0x25 +#define TM6010_REQ07_R26_HSYNC_RISING_EDGE_START 0x07, 0x26 +#define TM6010_REQ07_R27_HSYNC_RISING_EDGE_END 0x07, 0x27 +#define TM6010_REQ07_R28_BACKPORCH_START 0x07, 0x28 +#define TM6010_REQ07_R29_BACKPORCH_END 0x07, 0x29 +#define TM6010_REQ07_R2A_HSYNC_FILTER_START 0x07, 0x2a +#define TM6010_REQ07_R2B_HSYNC_FILTER_END 0x07, 0x2b +#define TM6010_REQ07_R2C_CHROMA_BURST_START 0x07, 0x2c +#define TM6010_REQ07_R2D_CHROMA_BURST_END 0x07, 0x2d +#define TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART 0x07, 0x2e +#define TM6010_REQ07_R2F_ACTIVE_VIDEO_HWIDTH 0x07, 0x2f +#define TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART 0x07, 0x30 +#define TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT 0x07, 0x31 +#define TM6010_REQ07_R32_VSYNC_HLOCK_MIN 0x07, 0x32 +#define TM6010_REQ07_R33_VSYNC_HLOCK_MAX 0x07, 0x33 +#define TM6010_REQ07_R34_VSYNC_AGC_MIN 0x07, 0x34 +#define TM6010_REQ07_R35_VSYNC_AGC_MAX 0x07, 0x35 +#define TM6010_REQ07_R36_VSYNC_VBI_MIN 0x07, 0x36 +#define TM6010_REQ07_R37_VSYNC_VBI_MAX 0x07, 0x37 +#define TM6010_REQ07_R38_VSYNC_THRESHOLD 0x07, 0x38 +#define TM6010_REQ07_R39_VSYNC_TIME_CONSTANT 0x07, 0x39 +#define TM6010_REQ07_R3A_STATUS1 0x07, 0x3a +#define TM6010_REQ07_R3B_STATUS2 0x07, 0x3b +#define TM6010_REQ07_R3C_STATUS3 0x07, 0x3c +#define TM6010_REQ07_R3F_RESET 0x07, 0x3f +#define TM6010_REQ07_R40_TELETEXT_VBI_CODE0 0x07, 0x40 +#define TM6010_REQ07_R41_TELETEXT_VBI_CODE1 0x07, 0x41 +#define TM6010_REQ07_R42_VBI_DATA_HIGH_LEVEL 0x07, 0x42 +#define TM6010_REQ07_R43_VBI_DATA_TYPE_LINE7 0x07, 0x43 +#define TM6010_REQ07_R44_VBI_DATA_TYPE_LINE8 0x07, 0x44 +#define TM6010_REQ07_R45_VBI_DATA_TYPE_LINE9 0x07, 0x45 +#define TM6010_REQ07_R46_VBI_DATA_TYPE_LINE10 0x07, 0x46 +#define TM6010_REQ07_R47_VBI_DATA_TYPE_LINE11 0x07, 0x47 +#define TM6010_REQ07_R48_VBI_DATA_TYPE_LINE12 0x07, 0x48 +#define TM6010_REQ07_R49_VBI_DATA_TYPE_LINE13 0x07, 0x49 +#define TM6010_REQ07_R4A_VBI_DATA_TYPE_LINE14 0x07, 0x4a +#define TM6010_REQ07_R4B_VBI_DATA_TYPE_LINE15 0x07, 0x4b +#define TM6010_REQ07_R4C_VBI_DATA_TYPE_LINE16 0x07, 0x4c +#define TM6010_REQ07_R4D_VBI_DATA_TYPE_LINE17 0x07, 0x4d +#define TM6010_REQ07_R4E_VBI_DATA_TYPE_LINE18 0x07, 0x4e +#define TM6010_REQ07_R4F_VBI_DATA_TYPE_LINE19 0x07, 0x4f +#define TM6010_REQ07_R50_VBI_DATA_TYPE_LINE20 0x07, 0x50 +#define TM6010_REQ07_R51_VBI_DATA_TYPE_LINE21 0x07, 0x51 +#define TM6010_REQ07_R52_VBI_DATA_TYPE_LINE22 0x07, 0x52 +#define TM6010_REQ07_R53_VBI_DATA_TYPE_LINE23 0x07, 0x53 +#define TM6010_REQ07_R54_VBI_DATA_TYPE_RLINES 0x07, 0x54 +#define TM6010_REQ07_R55_VBI_LOOP_FILTER_GAIN 0x07, 0x55 +#define TM6010_REQ07_R56_VBI_LOOP_FILTER_I_GAIN 0x07, 0x56 +#define TM6010_REQ07_R57_VBI_LOOP_FILTER_P_GAIN 0x07, 0x57 +#define TM6010_REQ07_R58_VBI_CAPTION_DTO1 0x07, 0x58 +#define TM6010_REQ07_R59_VBI_CAPTION_DTO0 0x07, 0x59 +#define TM6010_REQ07_R5A_VBI_TELETEXT_DTO1 0x07, 0x5a +#define TM6010_REQ07_R5B_VBI_TELETEXT_DTO0 0x07, 0x5b +#define TM6010_REQ07_R5C_VBI_WSS625_DTO1 0x07, 0x5c +#define TM6010_REQ07_R5D_VBI_WSS625_DTO0 0x07, 0x5d +#define TM6010_REQ07_R5E_VBI_CAPTION_FRAME_START 0x07, 0x5e +#define TM6010_REQ07_R5F_VBI_WSS625_FRAME_START 0x07, 0x5f +#define TM6010_REQ07_R60_TELETEXT_FRAME_START 0x07, 0x60 +#define TM6010_REQ07_R61_VBI_CCDATA1 0x07, 0x61 +#define TM6010_REQ07_R62_VBI_CCDATA2 0x07, 0x62 +#define TM6010_REQ07_R63_VBI_WSS625_DATA1 0x07, 0x63 +#define TM6010_REQ07_R64_VBI_WSS625_DATA2 0x07, 0x64 +#define TM6010_REQ07_R65_VBI_DATA_STATUS 0x07, 0x65 +#define TM6010_REQ07_R66_VBI_CAPTION_START 0x07, 0x66 +#define TM6010_REQ07_R67_VBI_WSS625_START 0x07, 0x67 +#define TM6010_REQ07_R68_VBI_TELETEXT_START 0x07, 0x68 +#define TM6010_REQ07_R70_HSYNC_DTO_INC_STATUS3 0x07, 0x70 +#define TM6010_REQ07_R71_HSYNC_DTO_INC_STATUS2 0x07, 0x71 +#define TM6010_REQ07_R72_HSYNC_DTO_INC_STATUS1 0x07, 0x72 +#define TM6010_REQ07_R73_HSYNC_DTO_INC_STATUS0 0x07, 0x73 +#define TM6010_REQ07_R74_CHROMA_DTO_INC_STATUS3 0x07, 0x74 +#define TM6010_REQ07_R75_CHROMA_DTO_INC_STATUS2 0x07, 0x75 +#define TM6010_REQ07_R76_CHROMA_DTO_INC_STATUS1 0x07, 0x76 +#define TM6010_REQ07_R77_CHROMA_DTO_INC_STATUS0 0x07, 0x77 +#define TM6010_REQ07_R78_AGC_AGAIN_STATUS 0x07, 0x78 +#define TM6010_REQ07_R79_AGC_DGAIN_STATUS 0x07, 0x79 +#define TM6010_REQ07_R7A_CHROMA_MAG_STATUS 0x07, 0x7a +#define TM6010_REQ07_R7B_CHROMA_GAIN_STATUS1 0x07, 0x7b +#define TM6010_REQ07_R7C_CHROMA_GAIN_STATUS0 0x07, 0x7c +#define TM6010_REQ07_R7D_CORDIC_FREQ_STATUS 0x07, 0x7d +#define TM6010_REQ07_R7F_STATUS_NOISE 0x07, 0x7f +#define TM6010_REQ07_R80_COMB_FILTER_TRESHOLD 0x07, 0x80 +#define TM6010_REQ07_R82_COMB_FILTER_CONFIG 0x07, 0x82 +#define TM6010_REQ07_R83_CHROMA_LOCK_CONFIG 0x07, 0x83 +#define TM6010_REQ07_R84_NOISE_NTSC_C 0x07, 0x84 +#define TM6010_REQ07_R85_NOISE_PAL_C 0x07, 0x85 +#define TM6010_REQ07_R86_NOISE_PHASE_C 0x07, 0x86 +#define TM6010_REQ07_R87_NOISE_PHASE_Y 0x07, 0x87 +#define TM6010_REQ07_R8A_CHROMA_LOOPFILTER_STATE 0x07, 0x8a +#define TM6010_REQ07_R8B_CHROMA_HRESAMPLER 0x07, 0x8b +#define TM6010_REQ07_R8D_CPUMP_DELAY_ADJ 0x07, 0x8d +#define TM6010_REQ07_R8E_CPUMP_ADJ 0x07, 0x8e +#define TM6010_REQ07_R8F_CPUMP_DELAY 0x07, 0x8f + +/* Define TM6000/TM6010 Miscellaneous registers */ +#define TM6010_REQ07_RC0_ACTIVE_VIDEO_SOURCE 0x07, 0xc0 +#define TM6010_REQ07_RC1_TRESHOLD 0x07, 0xc1 +#define TM6010_REQ07_RC2_HSYNC_WIDTH 0x07, 0xc2 +#define TM6010_REQ07_RC3_HSTART1 0x07, 0xc3 +#define TM6010_REQ07_RC4_HSTART0 0x07, 0xc4 +#define TM6010_REQ07_RC5_HEND1 0x07, 0xc5 +#define TM6010_REQ07_RC6_HEND0 0x07, 0xc6 +#define TM6010_REQ07_RC7_VSTART1 0x07, 0xc7 +#define TM6010_REQ07_RC8_VSTART0 0x07, 0xc8 +#define TM6010_REQ07_RC9_VEND1 0x07, 0xc9 +#define TM6010_REQ07_RCA_VEND0 0x07, 0xca +#define TM6010_REQ07_RCB_DELAY 0x07, 0xcb +/* ONLY for TM6010 */ +#define TM6010_REQ07_RCC_ACTIVE_IF 0x07, 0xcc +#define TM6010_REQ07_RCC_ACTIVE_IF_VIDEO_ENABLE (1 << 5) +#define TM6010_REQ07_RCC_ACTIVE_IF_AUDIO_ENABLE (1 << 6) +#define TM6010_REQ07_RD0_USB_PERIPHERY_CONTROL 0x07, 0xd0 +#define TM6010_REQ07_RD1_ADDR_FOR_REQ1 0x07, 0xd1 +#define TM6010_REQ07_RD2_ADDR_FOR_REQ2 0x07, 0xd2 +#define TM6010_REQ07_RD3_ADDR_FOR_REQ3 0x07, 0xd3 +#define TM6010_REQ07_RD4_ADDR_FOR_REQ4 0x07, 0xd4 +#define TM6010_REQ07_RD5_POWERSAVE 0x07, 0xd5 +#define TM6010_REQ07_RD6_ENDP_REQ1_REQ2 0x07, 0xd6 +#define TM6010_REQ07_RD7_ENDP_REQ3_REQ4 0x07, 0xd7 +/* ONLY for TM6010 */ +#define TM6010_REQ07_RD8_IR 0x07, 0xd8 +/* ONLY for TM6010 */ +#define TM6010_REQ07_RD9_IR_BSIZE 0x07, 0xd9 +/* ONLY for TM6010 */ +#define TM6010_REQ07_RDA_IR_WAKEUP_SEL 0x07, 0xda +/* ONLY for TM6010 */ +#define TM6010_REQ07_RDB_IR_WAKEUP_ADD 0x07, 0xdb +/* ONLY for TM6010 */ +#define TM6010_REQ07_RDC_IR_LEADER1 0x07, 0xdc +/* ONLY for TM6010 */ +#define TM6010_REQ07_RDD_IR_LEADER0 0x07, 0xdd +/* ONLY for TM6010 */ +#define TM6010_REQ07_RDE_IR_PULSE_CNT1 0x07, 0xde +/* ONLY for TM6010 */ +#define TM6010_REQ07_RDF_IR_PULSE_CNT0 0x07, 0xdf +/* ONLY for TM6010 */ +#define TM6010_REQ07_RE0_DVIDEO_SOURCE 0x07, 0xe0 +/* ONLY for TM6010 */ +#define TM6010_REQ07_RE0_DVIDEO_SOURCE_IF 0x07, 0xe1 +/* ONLY for TM6010 */ +#define TM6010_REQ07_RE2_OUT_SEL2 0x07, 0xe2 +/* ONLY for TM6010 */ +#define TM6010_REQ07_RE3_OUT_SEL1 0x07, 0xe3 +/* ONLY for TM6010 */ +#define TM6010_REQ07_RE4_OUT_SEL0 0x07, 0xe4 +/* ONLY for TM6010 */ +#define TM6010_REQ07_RE5_REMOTE_WAKEUP 0x07, 0xe5 +/* ONLY for TM6010 */ +#define TM6010_REQ07_RE7_PUB_GPIO 0x07, 0xe7 +/* ONLY for TM6010 */ +#define TM6010_REQ07_RE8_TYPESEL_MOS_I2S 0x07, 0xe8 +/* ONLY for TM6010 */ +#define TM6010_REQ07_RE9_TYPESEL_MOS_TS 0x07, 0xe9 +/* ONLY for TM6010 */ +#define TM6010_REQ07_REA_TYPESEL_MOS_CCIR 0x07, 0xea +/* ONLY for TM6010 */ +#define TM6010_REQ07_RF0_BIST_CRC_RESULT0 0x07, 0xf0 +/* ONLY for TM6010 */ +#define TM6010_REQ07_RF1_BIST_CRC_RESULT1 0x07, 0xf1 +/* ONLY for TM6010 */ +#define TM6010_REQ07_RF2_BIST_CRC_RESULT2 0x07, 0xf2 +/* ONLY for TM6010 */ +#define TM6010_REQ07_RF3_BIST_CRC_RESULT3 0x07, 0xf3 +/* ONLY for TM6010 */ +#define TM6010_REQ07_RF4_BIST_ERR_VST2 0x07, 0xf4 +/* ONLY for TM6010 */ +#define TM6010_REQ07_RF5_BIST_ERR_VST1 0x07, 0xf5 +/* ONLY for TM6010 */ +#define TM6010_REQ07_RF6_BIST_ERR_VST0 0x07, 0xf6 +/* ONLY for TM6010 */ +#define TM6010_REQ07_RF7_BIST 0x07, 0xf7 +/* ONLY for TM6010 */ +#define TM6010_REQ07_RFE_POWER_DOWN 0x07, 0xfe +#define TM6010_REQ07_RFF_SOFT_RESET 0x07, 0xff + +/* Define TM6000/TM6010 USB registers */ +#define TM6010_REQ05_R00_MAIN_CTRL 0x05, 0x00 +#define TM6010_REQ05_R01_DEVADDR 0x05, 0x01 +#define TM6010_REQ05_R02_TEST 0x05, 0x02 +#define TM6010_REQ05_R04_SOFN0 0x05, 0x04 +#define TM6010_REQ05_R05_SOFN1 0x05, 0x05 +#define TM6010_REQ05_R06_SOFTM0 0x05, 0x06 +#define TM6010_REQ05_R07_SOFTM1 0x05, 0x07 +#define TM6010_REQ05_R08_PHY_TEST 0x05, 0x08 +#define TM6010_REQ05_R09_VCTL 0x05, 0x09 +#define TM6010_REQ05_R0A_VSTA 0x05, 0x0a +#define TM6010_REQ05_R0B_CX_CFG 0x05, 0x0b +#define TM6010_REQ05_R0C_ENDP0_REG0 0x05, 0x0c +#define TM6010_REQ05_R10_GMASK 0x05, 0x10 +#define TM6010_REQ05_R11_IMASK0 0x05, 0x11 +#define TM6010_REQ05_R12_IMASK1 0x05, 0x12 +#define TM6010_REQ05_R13_IMASK2 0x05, 0x13 +#define TM6010_REQ05_R14_IMASK3 0x05, 0x14 +#define TM6010_REQ05_R15_IMASK4 0x05, 0x15 +#define TM6010_REQ05_R16_IMASK5 0x05, 0x16 +#define TM6010_REQ05_R17_IMASK6 0x05, 0x17 +#define TM6010_REQ05_R18_IMASK7 0x05, 0x18 +#define TM6010_REQ05_R19_ZEROP0 0x05, 0x19 +#define TM6010_REQ05_R1A_ZEROP1 0x05, 0x1a +#define TM6010_REQ05_R1C_FIFO_EMP0 0x05, 0x1c +#define TM6010_REQ05_R1D_FIFO_EMP1 0x05, 0x1d +#define TM6010_REQ05_R20_IRQ_GROUP 0x05, 0x20 +#define TM6010_REQ05_R21_IRQ_SOURCE0 0x05, 0x21 +#define TM6010_REQ05_R22_IRQ_SOURCE1 0x05, 0x22 +#define TM6010_REQ05_R23_IRQ_SOURCE2 0x05, 0x23 +#define TM6010_REQ05_R24_IRQ_SOURCE3 0x05, 0x24 +#define TM6010_REQ05_R25_IRQ_SOURCE4 0x05, 0x25 +#define TM6010_REQ05_R26_IRQ_SOURCE5 0x05, 0x26 +#define TM6010_REQ05_R27_IRQ_SOURCE6 0x05, 0x27 +#define TM6010_REQ05_R28_IRQ_SOURCE7 0x05, 0x28 +#define TM6010_REQ05_R29_SEQ_ERR0 0x05, 0x29 +#define TM6010_REQ05_R2A_SEQ_ERR1 0x05, 0x2a +#define TM6010_REQ05_R2B_SEQ_ABORT0 0x05, 0x2b +#define TM6010_REQ05_R2C_SEQ_ABORT1 0x05, 0x2c +#define TM6010_REQ05_R2D_TX_ZERO0 0x05, 0x2d +#define TM6010_REQ05_R2E_TX_ZERO1 0x05, 0x2e +#define TM6010_REQ05_R2F_IDLE_CNT 0x05, 0x2f +#define TM6010_REQ05_R30_FNO_P1 0x05, 0x30 +#define TM6010_REQ05_R31_FNO_P2 0x05, 0x31 +#define TM6010_REQ05_R32_FNO_P3 0x05, 0x32 +#define TM6010_REQ05_R33_FNO_P4 0x05, 0x33 +#define TM6010_REQ05_R34_FNO_P5 0x05, 0x34 +#define TM6010_REQ05_R35_FNO_P6 0x05, 0x35 +#define TM6010_REQ05_R36_FNO_P7 0x05, 0x36 +#define TM6010_REQ05_R37_FNO_P8 0x05, 0x37 +#define TM6010_REQ05_R38_FNO_P9 0x05, 0x38 +#define TM6010_REQ05_R30_FNO_P10 0x05, 0x39 +#define TM6010_REQ05_R30_FNO_P11 0x05, 0x3a +#define TM6010_REQ05_R30_FNO_P12 0x05, 0x3b +#define TM6010_REQ05_R30_FNO_P13 0x05, 0x3c +#define TM6010_REQ05_R30_FNO_P14 0x05, 0x3d +#define TM6010_REQ05_R30_FNO_P15 0x05, 0x3e +#define TM6010_REQ05_R40_IN_MAXPS_LOW1 0x05, 0x40 +#define TM6010_REQ05_R41_IN_MAXPS_HIGH1 0x05, 0x41 +#define TM6010_REQ05_R42_IN_MAXPS_LOW2 0x05, 0x42 +#define TM6010_REQ05_R43_IN_MAXPS_HIGH2 0x05, 0x43 +#define TM6010_REQ05_R44_IN_MAXPS_LOW3 0x05, 0x44 +#define TM6010_REQ05_R45_IN_MAXPS_HIGH3 0x05, 0x45 +#define TM6010_REQ05_R46_IN_MAXPS_LOW4 0x05, 0x46 +#define TM6010_REQ05_R47_IN_MAXPS_HIGH4 0x05, 0x47 +#define TM6010_REQ05_R48_IN_MAXPS_LOW5 0x05, 0x48 +#define TM6010_REQ05_R49_IN_MAXPS_HIGH5 0x05, 0x49 +#define TM6010_REQ05_R4A_IN_MAXPS_LOW6 0x05, 0x4a +#define TM6010_REQ05_R4B_IN_MAXPS_HIGH6 0x05, 0x4b +#define TM6010_REQ05_R4C_IN_MAXPS_LOW7 0x05, 0x4c +#define TM6010_REQ05_R4D_IN_MAXPS_HIGH7 0x05, 0x4d +#define TM6010_REQ05_R4E_IN_MAXPS_LOW8 0x05, 0x4e +#define TM6010_REQ05_R4F_IN_MAXPS_HIGH8 0x05, 0x4f +#define TM6010_REQ05_R50_IN_MAXPS_LOW9 0x05, 0x50 +#define TM6010_REQ05_R51_IN_MAXPS_HIGH9 0x05, 0x51 +#define TM6010_REQ05_R40_IN_MAXPS_LOW10 0x05, 0x52 +#define TM6010_REQ05_R41_IN_MAXPS_HIGH10 0x05, 0x53 +#define TM6010_REQ05_R40_IN_MAXPS_LOW11 0x05, 0x54 +#define TM6010_REQ05_R41_IN_MAXPS_HIGH11 0x05, 0x55 +#define TM6010_REQ05_R40_IN_MAXPS_LOW12 0x05, 0x56 +#define TM6010_REQ05_R41_IN_MAXPS_HIGH12 0x05, 0x57 +#define TM6010_REQ05_R40_IN_MAXPS_LOW13 0x05, 0x58 +#define TM6010_REQ05_R41_IN_MAXPS_HIGH13 0x05, 0x59 +#define TM6010_REQ05_R40_IN_MAXPS_LOW14 0x05, 0x5a +#define TM6010_REQ05_R41_IN_MAXPS_HIGH14 0x05, 0x5b +#define TM6010_REQ05_R40_IN_MAXPS_LOW15 0x05, 0x5c +#define TM6010_REQ05_R41_IN_MAXPS_HIGH15 0x05, 0x5d +#define TM6010_REQ05_R60_OUT_MAXPS_LOW1 0x05, 0x60 +#define TM6010_REQ05_R61_OUT_MAXPS_HIGH1 0x05, 0x61 +#define TM6010_REQ05_R62_OUT_MAXPS_LOW2 0x05, 0x62 +#define TM6010_REQ05_R63_OUT_MAXPS_HIGH2 0x05, 0x63 +#define TM6010_REQ05_R64_OUT_MAXPS_LOW3 0x05, 0x64 +#define TM6010_REQ05_R65_OUT_MAXPS_HIGH3 0x05, 0x65 +#define TM6010_REQ05_R66_OUT_MAXPS_LOW4 0x05, 0x66 +#define TM6010_REQ05_R67_OUT_MAXPS_HIGH4 0x05, 0x67 +#define TM6010_REQ05_R68_OUT_MAXPS_LOW5 0x05, 0x68 +#define TM6010_REQ05_R69_OUT_MAXPS_HIGH5 0x05, 0x69 +#define TM6010_REQ05_R6A_OUT_MAXPS_LOW6 0x05, 0x6a +#define TM6010_REQ05_R6B_OUT_MAXPS_HIGH6 0x05, 0x6b +#define TM6010_REQ05_R6C_OUT_MAXPS_LOW7 0x05, 0x6c +#define TM6010_REQ05_R6D_OUT_MAXPS_HIGH7 0x05, 0x6d +#define TM6010_REQ05_R6E_OUT_MAXPS_LOW8 0x05, 0x6e +#define TM6010_REQ05_R6F_OUT_MAXPS_HIGH8 0x05, 0x6f +#define TM6010_REQ05_R70_OUT_MAXPS_LOW9 0x05, 0x70 +#define TM6010_REQ05_R71_OUT_MAXPS_HIGH9 0x05, 0x71 +#define TM6010_REQ05_R60_OUT_MAXPS_LOW10 0x05, 0x72 +#define TM6010_REQ05_R61_OUT_MAXPS_HIGH10 0x05, 0x73 +#define TM6010_REQ05_R60_OUT_MAXPS_LOW11 0x05, 0x74 +#define TM6010_REQ05_R61_OUT_MAXPS_HIGH11 0x05, 0x75 +#define TM6010_REQ05_R60_OUT_MAXPS_LOW12 0x05, 0x76 +#define TM6010_REQ05_R61_OUT_MAXPS_HIGH12 0x05, 0x77 +#define TM6010_REQ05_R60_OUT_MAXPS_LOW13 0x05, 0x78 +#define TM6010_REQ05_R61_OUT_MAXPS_HIGH13 0x05, 0x79 +#define TM6010_REQ05_R60_OUT_MAXPS_LOW14 0x05, 0x7a +#define TM6010_REQ05_R61_OUT_MAXPS_HIGH14 0x05, 0x7b +#define TM6010_REQ05_R60_OUT_MAXPS_LOW15 0x05, 0x7c +#define TM6010_REQ05_R61_OUT_MAXPS_HIGH15 0x05, 0x7d +#define TM6010_REQ05_R80_FIFO0 0x05, 0x80 +#define TM6010_REQ05_R81_FIFO1 0x05, 0x81 +#define TM6010_REQ05_R82_FIFO2 0x05, 0x82 +#define TM6010_REQ05_R83_FIFO3 0x05, 0x83 +#define TM6010_REQ05_R84_FIFO4 0x05, 0x84 +#define TM6010_REQ05_R85_FIFO5 0x05, 0x85 +#define TM6010_REQ05_R86_FIFO6 0x05, 0x86 +#define TM6010_REQ05_R87_FIFO7 0x05, 0x87 +#define TM6010_REQ05_R88_FIFO8 0x05, 0x88 +#define TM6010_REQ05_R89_FIFO9 0x05, 0x89 +#define TM6010_REQ05_R81_FIFO10 0x05, 0x8a +#define TM6010_REQ05_R81_FIFO11 0x05, 0x8b +#define TM6010_REQ05_R81_FIFO12 0x05, 0x8c +#define TM6010_REQ05_R81_FIFO13 0x05, 0x8d +#define TM6010_REQ05_R81_FIFO14 0x05, 0x8e +#define TM6010_REQ05_R81_FIFO15 0x05, 0x8f +#define TM6010_REQ05_R90_CFG_FIFO0 0x05, 0x90 +#define TM6010_REQ05_R91_CFG_FIFO1 0x05, 0x91 +#define TM6010_REQ05_R92_CFG_FIFO2 0x05, 0x92 +#define TM6010_REQ05_R93_CFG_FIFO3 0x05, 0x93 +#define TM6010_REQ05_R94_CFG_FIFO4 0x05, 0x94 +#define TM6010_REQ05_R95_CFG_FIFO5 0x05, 0x95 +#define TM6010_REQ05_R96_CFG_FIFO6 0x05, 0x96 +#define TM6010_REQ05_R97_CFG_FIFO7 0x05, 0x97 +#define TM6010_REQ05_R98_CFG_FIFO8 0x05, 0x98 +#define TM6010_REQ05_R99_CFG_FIFO9 0x05, 0x99 +#define TM6010_REQ05_R91_CFG_FIFO10 0x05, 0x9a +#define TM6010_REQ05_R91_CFG_FIFO11 0x05, 0x9b +#define TM6010_REQ05_R91_CFG_FIFO12 0x05, 0x9c +#define TM6010_REQ05_R91_CFG_FIFO13 0x05, 0x9d +#define TM6010_REQ05_R91_CFG_FIFO14 0x05, 0x9e +#define TM6010_REQ05_R91_CFG_FIFO15 0x05, 0x9f +#define TM6010_REQ05_RA0_CTL_FIFO0 0x05, 0xa0 +#define TM6010_REQ05_RA1_CTL_FIFO1 0x05, 0xa1 +#define TM6010_REQ05_RA2_CTL_FIFO2 0x05, 0xa2 +#define TM6010_REQ05_RA3_CTL_FIFO3 0x05, 0xa3 +#define TM6010_REQ05_RA4_CTL_FIFO4 0x05, 0xa4 +#define TM6010_REQ05_RA5_CTL_FIFO5 0x05, 0xa5 +#define TM6010_REQ05_RA6_CTL_FIFO6 0x05, 0xa6 +#define TM6010_REQ05_RA7_CTL_FIFO7 0x05, 0xa7 +#define TM6010_REQ05_RA8_CTL_FIFO8 0x05, 0xa8 +#define TM6010_REQ05_RA9_CTL_FIFO9 0x05, 0xa9 +#define TM6010_REQ05_RA1_CTL_FIFO10 0x05, 0xaa +#define TM6010_REQ05_RA1_CTL_FIFO11 0x05, 0xab +#define TM6010_REQ05_RA1_CTL_FIFO12 0x05, 0xac +#define TM6010_REQ05_RA1_CTL_FIFO13 0x05, 0xad +#define TM6010_REQ05_RA1_CTL_FIFO14 0x05, 0xae +#define TM6010_REQ05_RA1_CTL_FIFO15 0x05, 0xaf +#define TM6010_REQ05_RB0_BC_LOW_FIFO0 0x05, 0xb0 +#define TM6010_REQ05_RB1_BC_LOW_FIFO1 0x05, 0xb1 +#define TM6010_REQ05_RB2_BC_LOW_FIFO2 0x05, 0xb2 +#define TM6010_REQ05_RB3_BC_LOW_FIFO3 0x05, 0xb3 +#define TM6010_REQ05_RB4_BC_LOW_FIFO4 0x05, 0xb4 +#define TM6010_REQ05_RB5_BC_LOW_FIFO5 0x05, 0xb5 +#define TM6010_REQ05_RB6_BC_LOW_FIFO6 0x05, 0xb6 +#define TM6010_REQ05_RB7_BC_LOW_FIFO7 0x05, 0xb7 +#define TM6010_REQ05_RB8_BC_LOW_FIFO8 0x05, 0xb8 +#define TM6010_REQ05_RB9_BC_LOW_FIFO9 0x05, 0xb9 +#define TM6010_REQ05_RB1_BC_LOW_FIFO10 0x05, 0xba +#define TM6010_REQ05_RB1_BC_LOW_FIFO11 0x05, 0xbb +#define TM6010_REQ05_RB1_BC_LOW_FIFO12 0x05, 0xbc +#define TM6010_REQ05_RB1_BC_LOW_FIFO13 0x05, 0xbd +#define TM6010_REQ05_RB1_BC_LOW_FIFO14 0x05, 0xbe +#define TM6010_REQ05_RB1_BC_LOW_FIFO15 0x05, 0xbf +#define TM6010_REQ05_RC0_DATA_FIFO0 0x05, 0xc0 +#define TM6010_REQ05_RC4_DATA_FIFO1 0x05, 0xc4 +#define TM6010_REQ05_RC8_DATA_FIFO2 0x05, 0xc8 +#define TM6010_REQ05_RCC_DATA_FIFO3 0x05, 0xcc +#define TM6010_REQ05_RD0_DATA_FIFO4 0x05, 0xd0 +#define TM6010_REQ05_RD4_DATA_FIFO5 0x05, 0xd4 +#define TM6010_REQ05_RD8_DATA_FIFO6 0x05, 0xd8 +#define TM6010_REQ05_RDC_DATA_FIFO7 0x05, 0xdc +#define TM6010_REQ05_RE0_DATA_FIFO8 0x05, 0xe0 +#define TM6010_REQ05_RE4_DATA_FIFO9 0x05, 0xe4 +#define TM6010_REQ05_RC4_DATA_FIFO10 0x05, 0xe8 +#define TM6010_REQ05_RC4_DATA_FIFO11 0x05, 0xec +#define TM6010_REQ05_RC4_DATA_FIFO12 0x05, 0xf0 +#define TM6010_REQ05_RC4_DATA_FIFO13 0x05, 0xf4 +#define TM6010_REQ05_RC4_DATA_FIFO14 0x05, 0xf8 +#define TM6010_REQ05_RC4_DATA_FIFO15 0x05, 0xfc + +/* Define TM6010 Audio decoder registers */ +/* This core available only in TM6010 */ +#define TM6010_REQ08_R00_A_VERSION 0x08, 0x00 +#define TM6010_REQ08_R01_A_INIT 0x08, 0x01 +#define TM6010_REQ08_R02_A_FIX_GAIN_CTRL 0x08, 0x02 +#define TM6010_REQ08_R03_A_AUTO_GAIN_CTRL 0x08, 0x03 +#define TM6010_REQ08_R04_A_SIF_AMP_CTRL 0x08, 0x04 +#define TM6010_REQ08_R05_A_STANDARD_MOD 0x08, 0x05 +#define TM6010_REQ08_R06_A_SOUND_MOD 0x08, 0x06 +#define TM6010_REQ08_R07_A_LEFT_VOL 0x08, 0x07 +#define TM6010_REQ08_R08_A_RIGHT_VOL 0x08, 0x08 +#define TM6010_REQ08_R09_A_MAIN_VOL 0x08, 0x09 +#define TM6010_REQ08_R0A_A_I2S_MOD 0x08, 0x0a +#define TM6010_REQ08_R0B_A_ASD_THRES1 0x08, 0x0b +#define TM6010_REQ08_R0C_A_ASD_THRES2 0x08, 0x0c +#define TM6010_REQ08_R0D_A_AMD_THRES 0x08, 0x0d +#define TM6010_REQ08_R0E_A_MONO_THRES1 0x08, 0x0e +#define TM6010_REQ08_R0F_A_MONO_THRES2 0x08, 0x0f +#define TM6010_REQ08_R10_A_MUTE_THRES1 0x08, 0x10 +#define TM6010_REQ08_R11_A_MUTE_THRES2 0x08, 0x11 +#define TM6010_REQ08_R12_A_AGC_U 0x08, 0x12 +#define TM6010_REQ08_R13_A_AGC_ERR_T 0x08, 0x13 +#define TM6010_REQ08_R14_A_AGC_GAIN_INIT 0x08, 0x14 +#define TM6010_REQ08_R15_A_AGC_STEP_THR 0x08, 0x15 +#define TM6010_REQ08_R16_A_AGC_GAIN_MAX 0x08, 0x16 +#define TM6010_REQ08_R17_A_AGC_GAIN_MIN 0x08, 0x17 +#define TM6010_REQ08_R18_A_TR_CTRL 0x08, 0x18 +#define TM6010_REQ08_R19_A_FH_2FH_GAIN 0x08, 0x19 +#define TM6010_REQ08_R1A_A_NICAM_SER_MAX 0x08, 0x1a +#define TM6010_REQ08_R1B_A_NICAM_SER_MIN 0x08, 0x1b +#define TM6010_REQ08_R1E_A_GAIN_DEEMPH_OUT 0x08, 0x1e +#define TM6010_REQ08_R1F_A_TEST_INTF_SEL 0x08, 0x1f +#define TM6010_REQ08_R20_A_TEST_PIN_SEL 0x08, 0x20 +#define TM6010_REQ08_R21_A_AGC_ERR 0x08, 0x21 +#define TM6010_REQ08_R22_A_AGC_GAIN 0x08, 0x22 +#define TM6010_REQ08_R23_A_NICAM_INFO 0x08, 0x23 +#define TM6010_REQ08_R24_A_SER 0x08, 0x24 +#define TM6010_REQ08_R25_A_C1_AMP 0x08, 0x25 +#define TM6010_REQ08_R26_A_C2_AMP 0x08, 0x26 +#define TM6010_REQ08_R27_A_NOISE_AMP 0x08, 0x27 +#define TM6010_REQ08_R28_A_AUDIO_MODE_RES 0x08, 0x28 + +/* Define TM6010 Video ADC registers */ +#define TM6010_REQ08_RE0_ADC_REF 0x08, 0xe0 +#define TM6010_REQ08_RE1_DAC_CLMP 0x08, 0xe1 +#define TM6010_REQ08_RE2_POWER_DOWN_CTRL1 0x08, 0xe2 +#define TM6010_REQ08_RE3_ADC_IN1_SEL 0x08, 0xe3 +#define TM6010_REQ08_RE4_ADC_IN2_SEL 0x08, 0xe4 +#define TM6010_REQ08_RE5_GAIN_PARAM 0x08, 0xe5 +#define TM6010_REQ08_RE6_POWER_DOWN_CTRL2 0x08, 0xe6 +#define TM6010_REQ08_RE7_REG_GAIN_Y 0x08, 0xe7 +#define TM6010_REQ08_RE8_REG_GAIN_C 0x08, 0xe8 +#define TM6010_REQ08_RE9_BIAS_CTRL 0x08, 0xe9 +#define TM6010_REQ08_REA_BUFF_DRV_CTRL 0x08, 0xea +#define TM6010_REQ08_REB_SIF_GAIN_CTRL 0x08, 0xeb +#define TM6010_REQ08_REC_REVERSE_YC_CTRL 0x08, 0xec +#define TM6010_REQ08_RED_GAIN_SEL 0x08, 0xed + +/* Define TM6010 Audio ADC registers */ +#define TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG 0x08, 0xf0 +#define TM6010_REQ08_RF1_AADC_POWER_DOWN 0x08, 0xf1 +#define TM6010_REQ08_RF2_LEFT_CHANNEL_VOL 0x08, 0xf2 +#define TM6010_REQ08_RF3_RIGHT_CHANNEL_VOL 0x08, 0xf3 diff --git a/drivers/media/usb/tm6000/tm6000-stds.c b/drivers/media/usb/tm6000/tm6000-stds.c new file mode 100644 index 000000000..858cb4f3a --- /dev/null +++ b/drivers/media/usb/tm6000/tm6000-stds.c @@ -0,0 +1,623 @@ +// SPDX-License-Identifier: GPL-2.0 +// tm6000-stds.c - driver for TM5600/TM6000/TM6010 USB video capture devices +// +// Copyright (c) 2007 Mauro Carvalho Chehab <mchehab@kernel.org> + +#include <linux/module.h> +#include <linux/kernel.h> +#include "tm6000.h" +#include "tm6000-regs.h" + +static unsigned int tm6010_a_mode; +module_param(tm6010_a_mode, int, 0644); +MODULE_PARM_DESC(tm6010_a_mode, "set tm6010 sif audio mode"); + +struct tm6000_reg_settings { + unsigned char req; + unsigned char reg; + unsigned char value; +}; + + +struct tm6000_std_settings { + v4l2_std_id id; + struct tm6000_reg_settings *common; +}; + +static struct tm6000_reg_settings composite_pal_m[] = { + { TM6010_REQ07_R3F_RESET, 0x01 }, + { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x04 }, + { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e }, + { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f }, + { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00 }, + { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 }, + { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e }, + { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x83 }, + { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x0a }, + { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe0 }, + { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c }, + { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc }, + { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc }, + { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd }, + { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 }, + { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x20 }, + { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 }, + { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c }, + { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c }, + { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 }, + { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f }, + { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc }, + { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 }, + { TM6010_REQ07_R3F_RESET, 0x00 }, + { 0, 0, 0 } +}; + +static struct tm6000_reg_settings composite_pal_nc[] = { + { TM6010_REQ07_R3F_RESET, 0x01 }, + { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x36 }, + { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e }, + { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f }, + { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x02 }, + { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 }, + { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e }, + { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x91 }, + { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x1f }, + { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0x0c }, + { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c }, + { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc }, + { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc }, + { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd }, + { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c }, + { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2c }, + { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 }, + { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c }, + { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c }, + { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 }, + { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f }, + { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc }, + { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 }, + { TM6010_REQ07_R3F_RESET, 0x00 }, + { 0, 0, 0 } +}; + +static struct tm6000_reg_settings composite_pal[] = { + { TM6010_REQ07_R3F_RESET, 0x01 }, + { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x32 }, + { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e }, + { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f }, + { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x02 }, + { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 }, + { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x25 }, + { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0xd5 }, + { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x63 }, + { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0x50 }, + { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c }, + { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc }, + { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc }, + { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd }, + { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c }, + { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2c }, + { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 }, + { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c }, + { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c }, + { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 }, + { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f }, + { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc }, + { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 }, + { TM6010_REQ07_R3F_RESET, 0x00 }, + { 0, 0, 0 } +}; + +static struct tm6000_reg_settings composite_secam[] = { + { TM6010_REQ07_R3F_RESET, 0x01 }, + { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x38 }, + { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e }, + { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f }, + { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x02 }, + { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 }, + { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x24 }, + { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x92 }, + { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xe8 }, + { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xed }, + { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c }, + { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc }, + { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc }, + { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd }, + { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c }, + { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2c }, + { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 }, + { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x2c }, + { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x18 }, + { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 }, + { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0xff }, + { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 }, + { TM6010_REQ07_R3F_RESET, 0x00 }, + { 0, 0, 0 } +}; + +static struct tm6000_reg_settings composite_ntsc[] = { + { TM6010_REQ07_R3F_RESET, 0x01 }, + { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x00 }, + { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0f }, + { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f }, + { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x00 }, + { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 }, + { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e }, + { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x8b }, + { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xa2 }, + { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe9 }, + { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c }, + { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc }, + { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc }, + { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd }, + { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 }, + { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 }, + { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 }, + { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x1c }, + { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c }, + { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 }, + { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f }, + { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdd }, + { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 }, + { TM6010_REQ07_R3F_RESET, 0x00 }, + { 0, 0, 0 } +}; + +static struct tm6000_std_settings composite_stds[] = { + { .id = V4L2_STD_PAL_M, .common = composite_pal_m, }, + { .id = V4L2_STD_PAL_Nc, .common = composite_pal_nc, }, + { .id = V4L2_STD_PAL, .common = composite_pal, }, + { .id = V4L2_STD_SECAM, .common = composite_secam, }, + { .id = V4L2_STD_NTSC, .common = composite_ntsc, }, +}; + +static struct tm6000_reg_settings svideo_pal_m[] = { + { TM6010_REQ07_R3F_RESET, 0x01 }, + { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x05 }, + { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e }, + { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f }, + { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x04 }, + { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 }, + { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e }, + { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x83 }, + { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x0a }, + { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe0 }, + { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c }, + { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc }, + { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc }, + { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd }, + { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 }, + { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 }, + { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 }, + { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c }, + { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c }, + { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 }, + { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f }, + { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc }, + { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 }, + { TM6010_REQ07_R3F_RESET, 0x00 }, + { 0, 0, 0 } +}; + +static struct tm6000_reg_settings svideo_pal_nc[] = { + { TM6010_REQ07_R3F_RESET, 0x01 }, + { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x37 }, + { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e }, + { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f }, + { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x04 }, + { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 }, + { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e }, + { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x91 }, + { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x1f }, + { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0x0c }, + { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c }, + { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc }, + { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc }, + { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd }, + { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 }, + { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 }, + { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 }, + { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c }, + { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c }, + { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 }, + { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f }, + { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc }, + { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 }, + { TM6010_REQ07_R3F_RESET, 0x00 }, + { 0, 0, 0 } +}; + +static struct tm6000_reg_settings svideo_pal[] = { + { TM6010_REQ07_R3F_RESET, 0x01 }, + { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x33 }, + { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e }, + { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f }, + { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x04 }, + { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x30 }, + { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x25 }, + { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0xd5 }, + { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0x63 }, + { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0x50 }, + { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c }, + { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc }, + { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc }, + { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd }, + { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c }, + { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2a }, + { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 }, + { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x0c }, + { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c }, + { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x52 }, + { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f }, + { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdc }, + { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 }, + { TM6010_REQ07_R3F_RESET, 0x00 }, + { 0, 0, 0 } +}; + +static struct tm6000_reg_settings svideo_secam[] = { + { TM6010_REQ07_R3F_RESET, 0x01 }, + { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x39 }, + { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0e }, + { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f }, + { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x03 }, + { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x31 }, + { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x24 }, + { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x92 }, + { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xe8 }, + { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xed }, + { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c }, + { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc }, + { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc }, + { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd }, + { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x8c }, + { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x2a }, + { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0xc1 }, + { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x2c }, + { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x18 }, + { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 }, + { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0xff }, + { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 }, + { TM6010_REQ07_R3F_RESET, 0x00 }, + { 0, 0, 0 } +}; + +static struct tm6000_reg_settings svideo_ntsc[] = { + { TM6010_REQ07_R3F_RESET, 0x01 }, + { TM6010_REQ07_R00_VIDEO_CONTROL0, 0x01 }, + { TM6010_REQ07_R01_VIDEO_CONTROL1, 0x0f }, + { TM6010_REQ07_R02_VIDEO_CONTROL2, 0x5f }, + { TM6010_REQ07_R03_YC_SEP_CONTROL, 0x03 }, + { TM6010_REQ07_R07_OUTPUT_CONTROL, 0x30 }, + { TM6010_REQ07_R17_HLOOP_MAXSTATE, 0x8b }, + { TM6010_REQ07_R18_CHROMA_DTO_INCREMENT3, 0x1e }, + { TM6010_REQ07_R19_CHROMA_DTO_INCREMENT2, 0x8b }, + { TM6010_REQ07_R1A_CHROMA_DTO_INCREMENT1, 0xa2 }, + { TM6010_REQ07_R1B_CHROMA_DTO_INCREMENT0, 0xe9 }, + { TM6010_REQ07_R1C_HSYNC_DTO_INCREMENT3, 0x1c }, + { TM6010_REQ07_R1D_HSYNC_DTO_INCREMENT2, 0xcc }, + { TM6010_REQ07_R1E_HSYNC_DTO_INCREMENT1, 0xcc }, + { TM6010_REQ07_R1F_HSYNC_DTO_INCREMENT0, 0xcd }, + { TM6010_REQ07_R2E_ACTIVE_VIDEO_HSTART, 0x88 }, + { TM6010_REQ07_R30_ACTIVE_VIDEO_VSTART, 0x22 }, + { TM6010_REQ07_R31_ACTIVE_VIDEO_VHIGHT, 0x61 }, + { TM6010_REQ07_R33_VSYNC_HLOCK_MAX, 0x1c }, + { TM6010_REQ07_R35_VSYNC_AGC_MAX, 0x1c }, + { TM6010_REQ07_R82_COMB_FILTER_CONFIG, 0x42 }, + { TM6010_REQ07_R83_CHROMA_LOCK_CONFIG, 0x6f }, + { TM6010_REQ07_R04_LUMA_HAGC_CONTROL, 0xdd }, + { TM6010_REQ07_R0D_CHROMA_KILL_LEVEL, 0x07 }, + { TM6010_REQ07_R3F_RESET, 0x00 }, + { 0, 0, 0 } +}; + +static struct tm6000_std_settings svideo_stds[] = { + { .id = V4L2_STD_PAL_M, .common = svideo_pal_m, }, + { .id = V4L2_STD_PAL_Nc, .common = svideo_pal_nc, }, + { .id = V4L2_STD_PAL, .common = svideo_pal, }, + { .id = V4L2_STD_SECAM, .common = svideo_secam, }, + { .id = V4L2_STD_NTSC, .common = svideo_ntsc, }, +}; + +static int tm6000_set_audio_std(struct tm6000_core *dev) +{ + uint8_t areg_02 = 0x04; /* GC1 Fixed gain 0dB */ + uint8_t areg_05 = 0x01; /* Auto 4.5 = M Japan, Auto 6.5 = DK */ + uint8_t areg_06 = 0x02; /* Auto de-emphasis, manual channel mode */ + + if (dev->radio) { + tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x00); + tm6000_set_reg(dev, TM6010_REQ08_R02_A_FIX_GAIN_CTRL, 0x04); + tm6000_set_reg(dev, TM6010_REQ08_R03_A_AUTO_GAIN_CTRL, 0x00); + tm6000_set_reg(dev, TM6010_REQ08_R04_A_SIF_AMP_CTRL, 0x80); + tm6000_set_reg(dev, TM6010_REQ08_R05_A_STANDARD_MOD, 0x0c); + /* set mono or stereo */ + if (dev->amode == V4L2_TUNER_MODE_MONO) + tm6000_set_reg(dev, TM6010_REQ08_R06_A_SOUND_MOD, 0x00); + else if (dev->amode == V4L2_TUNER_MODE_STEREO) + tm6000_set_reg(dev, TM6010_REQ08_R06_A_SOUND_MOD, 0x02); + tm6000_set_reg(dev, TM6010_REQ08_R09_A_MAIN_VOL, 0x18); + tm6000_set_reg(dev, TM6010_REQ08_R0C_A_ASD_THRES2, 0x0a); + tm6000_set_reg(dev, TM6010_REQ08_R0D_A_AMD_THRES, 0x40); + tm6000_set_reg(dev, TM6010_REQ08_RF1_AADC_POWER_DOWN, 0xfe); + tm6000_set_reg(dev, TM6010_REQ08_R1E_A_GAIN_DEEMPH_OUT, 0x13); + tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x80); + tm6000_set_reg(dev, TM6010_REQ07_RFE_POWER_DOWN, 0xff); + return 0; + } + + /* + * STD/MN shouldn't be affected by tm6010_a_mode, as there's just one + * audio standard for each V4L2_STD type. + */ + if ((dev->norm & V4L2_STD_NTSC) == V4L2_STD_NTSC_M_KR) { + areg_05 |= 0x04; + } else if ((dev->norm & V4L2_STD_NTSC) == V4L2_STD_NTSC_M_JP) { + areg_05 |= 0x43; + } else if (dev->norm & V4L2_STD_MN) { + areg_05 |= 0x22; + } else switch (tm6010_a_mode) { + /* auto */ + case 0: + if ((dev->norm & V4L2_STD_SECAM) == V4L2_STD_SECAM_L) + areg_05 |= 0x00; + else /* Other PAL/SECAM standards */ + areg_05 |= 0x10; + break; + /* A2 */ + case 1: + if (dev->norm & V4L2_STD_DK) + areg_05 = 0x09; + else + areg_05 = 0x05; + break; + /* NICAM */ + case 2: + if (dev->norm & V4L2_STD_DK) { + areg_05 = 0x06; + } else if (dev->norm & V4L2_STD_PAL_I) { + areg_05 = 0x08; + } else if (dev->norm & V4L2_STD_SECAM_L) { + areg_05 = 0x0a; + areg_02 = 0x02; + } else { + areg_05 = 0x07; + } + break; + /* other */ + case 3: + if (dev->norm & V4L2_STD_DK) { + areg_05 = 0x0b; + } else { + areg_05 = 0x02; + } + break; + } + + tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x00); + tm6000_set_reg(dev, TM6010_REQ08_R02_A_FIX_GAIN_CTRL, areg_02); + tm6000_set_reg(dev, TM6010_REQ08_R03_A_AUTO_GAIN_CTRL, 0x00); + tm6000_set_reg(dev, TM6010_REQ08_R04_A_SIF_AMP_CTRL, 0xa0); + tm6000_set_reg(dev, TM6010_REQ08_R05_A_STANDARD_MOD, areg_05); + tm6000_set_reg(dev, TM6010_REQ08_R06_A_SOUND_MOD, areg_06); + tm6000_set_reg(dev, TM6010_REQ08_R07_A_LEFT_VOL, 0x00); + tm6000_set_reg(dev, TM6010_REQ08_R08_A_RIGHT_VOL, 0x00); + tm6000_set_reg(dev, TM6010_REQ08_R09_A_MAIN_VOL, 0x08); + tm6000_set_reg(dev, TM6010_REQ08_R0A_A_I2S_MOD, 0x91); + tm6000_set_reg(dev, TM6010_REQ08_R0B_A_ASD_THRES1, 0x20); + tm6000_set_reg(dev, TM6010_REQ08_R0C_A_ASD_THRES2, 0x12); + tm6000_set_reg(dev, TM6010_REQ08_R0D_A_AMD_THRES, 0x20); + tm6000_set_reg(dev, TM6010_REQ08_R0E_A_MONO_THRES1, 0xf0); + tm6000_set_reg(dev, TM6010_REQ08_R0F_A_MONO_THRES2, 0x80); + tm6000_set_reg(dev, TM6010_REQ08_R10_A_MUTE_THRES1, 0xc0); + tm6000_set_reg(dev, TM6010_REQ08_R11_A_MUTE_THRES2, 0x80); + tm6000_set_reg(dev, TM6010_REQ08_R12_A_AGC_U, 0x12); + tm6000_set_reg(dev, TM6010_REQ08_R13_A_AGC_ERR_T, 0xfe); + tm6000_set_reg(dev, TM6010_REQ08_R14_A_AGC_GAIN_INIT, 0x20); + tm6000_set_reg(dev, TM6010_REQ08_R15_A_AGC_STEP_THR, 0x14); + tm6000_set_reg(dev, TM6010_REQ08_R16_A_AGC_GAIN_MAX, 0xfe); + tm6000_set_reg(dev, TM6010_REQ08_R17_A_AGC_GAIN_MIN, 0x01); + tm6000_set_reg(dev, TM6010_REQ08_R18_A_TR_CTRL, 0xa0); + tm6000_set_reg(dev, TM6010_REQ08_R19_A_FH_2FH_GAIN, 0x32); + tm6000_set_reg(dev, TM6010_REQ08_R1A_A_NICAM_SER_MAX, 0x64); + tm6000_set_reg(dev, TM6010_REQ08_R1B_A_NICAM_SER_MIN, 0x20); + tm6000_set_reg(dev, REQ_08_SET_GET_AVREG_BIT, 0x1c, 0x00); + tm6000_set_reg(dev, REQ_08_SET_GET_AVREG_BIT, 0x1d, 0x00); + tm6000_set_reg(dev, TM6010_REQ08_R1E_A_GAIN_DEEMPH_OUT, 0x13); + tm6000_set_reg(dev, TM6010_REQ08_R1F_A_TEST_INTF_SEL, 0x00); + tm6000_set_reg(dev, TM6010_REQ08_R20_A_TEST_PIN_SEL, 0x00); + tm6000_set_reg(dev, TM6010_REQ08_R01_A_INIT, 0x80); + + return 0; +} + +void tm6000_get_std_res(struct tm6000_core *dev) +{ + /* Currently, those are the only supported resoltions */ + if (dev->norm & V4L2_STD_525_60) + dev->height = 480; + else + dev->height = 576; + + dev->width = 720; +} + +static int tm6000_load_std(struct tm6000_core *dev, struct tm6000_reg_settings *set) +{ + int i, rc; + + /* Load board's initialization table */ + for (i = 0; set[i].req; i++) { + rc = tm6000_set_reg(dev, set[i].req, set[i].reg, set[i].value); + if (rc < 0) { + printk(KERN_ERR "Error %i while setting req %d, reg %d to value %d\n", + rc, set[i].req, set[i].reg, set[i].value); + return rc; + } + } + + return 0; +} + +int tm6000_set_standard(struct tm6000_core *dev) +{ + struct tm6000_input *input; + int i, rc = 0; + u8 reg_07_fe = 0x8a; + u8 reg_08_f1 = 0xfc; + u8 reg_08_e2 = 0xf0; + u8 reg_08_e6 = 0x0f; + + tm6000_get_std_res(dev); + + if (!dev->radio) + input = &dev->vinput[dev->input]; + else + input = &dev->rinput; + + if (dev->dev_type == TM6010) { + switch (input->vmux) { + case TM6000_VMUX_VIDEO_A: + tm6000_set_reg(dev, TM6010_REQ08_RE3_ADC_IN1_SEL, 0xf4); + tm6000_set_reg(dev, TM6010_REQ08_REA_BUFF_DRV_CTRL, 0xf1); + tm6000_set_reg(dev, TM6010_REQ08_REB_SIF_GAIN_CTRL, 0xe0); + tm6000_set_reg(dev, TM6010_REQ08_REC_REVERSE_YC_CTRL, 0xc2); + tm6000_set_reg(dev, TM6010_REQ08_RED_GAIN_SEL, 0xe8); + reg_07_fe |= 0x01; + break; + case TM6000_VMUX_VIDEO_B: + tm6000_set_reg(dev, TM6010_REQ08_RE3_ADC_IN1_SEL, 0xf8); + tm6000_set_reg(dev, TM6010_REQ08_REA_BUFF_DRV_CTRL, 0xf1); + tm6000_set_reg(dev, TM6010_REQ08_REB_SIF_GAIN_CTRL, 0xe0); + tm6000_set_reg(dev, TM6010_REQ08_REC_REVERSE_YC_CTRL, 0xc2); + tm6000_set_reg(dev, TM6010_REQ08_RED_GAIN_SEL, 0xe8); + reg_07_fe |= 0x01; + break; + case TM6000_VMUX_VIDEO_AB: + tm6000_set_reg(dev, TM6010_REQ08_RE3_ADC_IN1_SEL, 0xfc); + tm6000_set_reg(dev, TM6010_REQ08_RE4_ADC_IN2_SEL, 0xf8); + reg_08_e6 = 0x00; + tm6000_set_reg(dev, TM6010_REQ08_REA_BUFF_DRV_CTRL, 0xf2); + tm6000_set_reg(dev, TM6010_REQ08_REB_SIF_GAIN_CTRL, 0xf0); + tm6000_set_reg(dev, TM6010_REQ08_REC_REVERSE_YC_CTRL, 0xc2); + tm6000_set_reg(dev, TM6010_REQ08_RED_GAIN_SEL, 0xe0); + break; + default: + break; + } + switch (input->amux) { + case TM6000_AMUX_ADC1: + tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG, + 0x00, 0x0f); + /* Mux overflow workaround */ + tm6000_set_reg_mask(dev, TM6010_REQ07_R07_OUTPUT_CONTROL, + 0x10, 0xf0); + break; + case TM6000_AMUX_ADC2: + tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG, + 0x08, 0x0f); + /* Mux overflow workaround */ + tm6000_set_reg_mask(dev, TM6010_REQ07_R07_OUTPUT_CONTROL, + 0x10, 0xf0); + break; + case TM6000_AMUX_SIF1: + reg_08_e2 |= 0x02; + reg_08_e6 = 0x08; + reg_07_fe |= 0x40; + reg_08_f1 |= 0x02; + tm6000_set_reg(dev, TM6010_REQ08_RE4_ADC_IN2_SEL, 0xf3); + tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG, + 0x02, 0x0f); + /* Mux overflow workaround */ + tm6000_set_reg_mask(dev, TM6010_REQ07_R07_OUTPUT_CONTROL, + 0x30, 0xf0); + break; + case TM6000_AMUX_SIF2: + reg_08_e2 |= 0x02; + reg_08_e6 = 0x08; + reg_07_fe |= 0x40; + reg_08_f1 |= 0x02; + tm6000_set_reg(dev, TM6010_REQ08_RE4_ADC_IN2_SEL, 0xf7); + tm6000_set_reg_mask(dev, TM6010_REQ08_RF0_DAUDIO_INPUT_CONFIG, + 0x02, 0x0f); + /* Mux overflow workaround */ + tm6000_set_reg_mask(dev, TM6010_REQ07_R07_OUTPUT_CONTROL, + 0x30, 0xf0); + break; + default: + break; + } + tm6000_set_reg(dev, TM6010_REQ08_RE2_POWER_DOWN_CTRL1, reg_08_e2); + tm6000_set_reg(dev, TM6010_REQ08_RE6_POWER_DOWN_CTRL2, reg_08_e6); + tm6000_set_reg(dev, TM6010_REQ08_RF1_AADC_POWER_DOWN, reg_08_f1); + tm6000_set_reg(dev, TM6010_REQ07_RFE_POWER_DOWN, reg_07_fe); + } else { + switch (input->vmux) { + case TM6000_VMUX_VIDEO_A: + tm6000_set_reg(dev, TM6000_REQ07_RE3_VADC_INP_LPF_SEL1, 0x10); + tm6000_set_reg(dev, TM6000_REQ07_RE5_VADC_INP_LPF_SEL2, 0x00); + tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0x0f); + tm6000_set_reg(dev, + REQ_03_SET_GET_MCU_PIN, input->v_gpio, 0); + break; + case TM6000_VMUX_VIDEO_B: + tm6000_set_reg(dev, TM6000_REQ07_RE3_VADC_INP_LPF_SEL1, 0x00); + tm6000_set_reg(dev, TM6000_REQ07_RE5_VADC_INP_LPF_SEL2, 0x00); + tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0x0f); + tm6000_set_reg(dev, + REQ_03_SET_GET_MCU_PIN, input->v_gpio, 0); + break; + case TM6000_VMUX_VIDEO_AB: + tm6000_set_reg(dev, TM6000_REQ07_RE3_VADC_INP_LPF_SEL1, 0x10); + tm6000_set_reg(dev, TM6000_REQ07_RE5_VADC_INP_LPF_SEL2, 0x10); + tm6000_set_reg(dev, TM6000_REQ07_RE8_VADC_PWDOWN_CTL, 0x00); + tm6000_set_reg(dev, + REQ_03_SET_GET_MCU_PIN, input->v_gpio, 1); + break; + default: + break; + } + switch (input->amux) { + case TM6000_AMUX_ADC1: + tm6000_set_reg_mask(dev, + TM6000_REQ07_REB_VADC_AADC_MODE, 0x00, 0x0f); + break; + case TM6000_AMUX_ADC2: + tm6000_set_reg_mask(dev, + TM6000_REQ07_REB_VADC_AADC_MODE, 0x04, 0x0f); + break; + default: + break; + } + } + if (input->type == TM6000_INPUT_SVIDEO) { + for (i = 0; i < ARRAY_SIZE(svideo_stds); i++) { + if (dev->norm & svideo_stds[i].id) { + rc = tm6000_load_std(dev, svideo_stds[i].common); + goto ret; + } + } + return -EINVAL; + } else { + for (i = 0; i < ARRAY_SIZE(composite_stds); i++) { + if (dev->norm & composite_stds[i].id) { + rc = tm6000_load_std(dev, composite_stds[i].common); + goto ret; + } + } + return -EINVAL; + } + +ret: + if (rc < 0) + return rc; + + if ((dev->dev_type == TM6010) && + ((input->amux == TM6000_AMUX_SIF1) || + (input->amux == TM6000_AMUX_SIF2))) + tm6000_set_audio_std(dev); + + msleep(40); + + return 0; +} diff --git a/drivers/media/usb/tm6000/tm6000-usb-isoc.h b/drivers/media/usb/tm6000/tm6000-usb-isoc.h new file mode 100644 index 000000000..e3c6933f8 --- /dev/null +++ b/drivers/media/usb/tm6000/tm6000-usb-isoc.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * tm6000-buf.c - driver for TM5600/TM6000/TM6010 USB video capture devices + * + * Copyright (c) 2006-2007 Mauro Carvalho Chehab <mchehab@kernel.org> + */ + +#include <linux/videodev2.h> + +#define TM6000_URB_MSG_LEN 180 + +struct usb_isoc_ctl { + /* max packet size of isoc transaction */ + int max_pkt_size; + + /* number of allocated urbs */ + int num_bufs; + + /* urb for isoc transfers */ + struct urb **urb; + + /* transfer buffers for isoc transfer */ + char **transfer_buffer; + + /* Last buffer command and region */ + u8 cmd; + int pos, size, pktsize; + + /* Last field: ODD or EVEN? */ + int vfield, field; + + /* Stores incomplete commands */ + u32 tmp_buf; + int tmp_buf_len; + + /* Stores already requested buffers */ + struct tm6000_buffer *buf; +}; diff --git a/drivers/media/usb/tm6000/tm6000-video.c b/drivers/media/usb/tm6000/tm6000-video.c new file mode 100644 index 000000000..01071e6cd --- /dev/null +++ b/drivers/media/usb/tm6000/tm6000-video.c @@ -0,0 +1,1707 @@ +// SPDX-License-Identifier: GPL-2.0 +// tm6000-video.c - driver for TM5600/TM6000/TM6010 USB video capture devices +// +// Copyright (c) 2006-2007 Mauro Carvalho Chehab <mchehab@kernel.org> +// +// Copyright (c) 2007 Michel Ludwig <michel.ludwig@gmail.com> +// - Fixed module load/unload + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/random.h> +#include <linux/usb.h> +#include <linux/videodev2.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-event.h> +#include <media/tuner.h> +#include <linux/interrupt.h> +#include <linux/kthread.h> +#include <linux/highmem.h> +#include <linux/freezer.h> + +#include "tm6000-regs.h" +#include "tm6000.h" + +#define BUFFER_TIMEOUT msecs_to_jiffies(2000) /* 2 seconds */ + +/* Limits minimum and default number of buffers */ +#define TM6000_MIN_BUF 4 +#define TM6000_DEF_BUF 8 + +#define TM6000_NUM_URB_BUF 8 + +#define TM6000_MAX_ISO_PACKETS 46 /* Max number of ISO packets */ + +/* Declare static vars that will be used as parameters */ +static unsigned int vid_limit = 16; /* Video memory limit, in Mb */ +static int video_nr = -1; /* /dev/videoN, -1 for autodetect */ +static int radio_nr = -1; /* /dev/radioN, -1 for autodetect */ +static bool keep_urb; /* keep urb buffers allocated */ + +/* Debug level */ +int tm6000_debug; +EXPORT_SYMBOL_GPL(tm6000_debug); + +static struct tm6000_fmt format[] = { + { + .fourcc = V4L2_PIX_FMT_YUYV, + .depth = 16, + }, { + .fourcc = V4L2_PIX_FMT_UYVY, + .depth = 16, + }, { + .fourcc = V4L2_PIX_FMT_TM6000, + .depth = 16, + } +}; + +/* ------------------------------------------------------------------ + * DMA and thread functions + * ------------------------------------------------------------------ + */ + +#define norm_maxw(a) 720 +#define norm_maxh(a) 576 + +#define norm_minw(a) norm_maxw(a) +#define norm_minh(a) norm_maxh(a) + +/* + * video-buf generic routine to get the next available buffer + */ +static inline void get_next_buf(struct tm6000_dmaqueue *dma_q, + struct tm6000_buffer **buf) +{ + struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq); + + if (list_empty(&dma_q->active)) { + dprintk(dev, V4L2_DEBUG_QUEUE, "No active queue to serve\n"); + *buf = NULL; + return; + } + + *buf = list_entry(dma_q->active.next, + struct tm6000_buffer, vb.queue); +} + +/* + * Announces that a buffer were filled and request the next + */ +static inline void buffer_filled(struct tm6000_core *dev, + struct tm6000_dmaqueue *dma_q, + struct tm6000_buffer *buf) +{ + /* Advice that buffer was filled */ + dprintk(dev, V4L2_DEBUG_ISOC, "[%p/%d] wakeup\n", buf, buf->vb.i); + buf->vb.state = VIDEOBUF_DONE; + buf->vb.field_count++; + buf->vb.ts = ktime_get_ns(); + + list_del(&buf->vb.queue); + wake_up(&buf->vb.done); +} + +/* + * Identify the tm5600/6000 buffer header type and properly handles + */ +static int copy_streams(u8 *data, unsigned long len, + struct urb *urb) +{ + struct tm6000_dmaqueue *dma_q = urb->context; + struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq); + u8 *ptr = data, *endp = data+len; + unsigned long header = 0; + int rc = 0; + unsigned int cmd, cpysize, pktsize, size, field, block, line, pos = 0; + struct tm6000_buffer *vbuf = NULL; + char *voutp = NULL; + unsigned int linewidth; + + if (!dev->radio) { + /* get video buffer */ + get_next_buf(dma_q, &vbuf); + + if (!vbuf) + return rc; + voutp = videobuf_to_vmalloc(&vbuf->vb); + + if (!voutp) + return 0; + } + + for (ptr = data; ptr < endp;) { + if (!dev->isoc_ctl.cmd) { + /* Header */ + if (dev->isoc_ctl.tmp_buf_len > 0) { + /* from last urb or packet */ + header = dev->isoc_ctl.tmp_buf; + if (4 - dev->isoc_ctl.tmp_buf_len > 0) { + memcpy((u8 *)&header + + dev->isoc_ctl.tmp_buf_len, + ptr, + 4 - dev->isoc_ctl.tmp_buf_len); + ptr += 4 - dev->isoc_ctl.tmp_buf_len; + } + dev->isoc_ctl.tmp_buf_len = 0; + } else { + if (ptr + 3 >= endp) { + /* have incomplete header */ + dev->isoc_ctl.tmp_buf_len = endp - ptr; + memcpy(&dev->isoc_ctl.tmp_buf, ptr, + dev->isoc_ctl.tmp_buf_len); + return rc; + } + /* Seek for sync */ + for (; ptr < endp - 3; ptr++) { + if (*(ptr + 3) == 0x47) + break; + } + /* Get message header */ + header = *(unsigned long *)ptr; + ptr += 4; + } + + /* split the header fields */ + size = ((header & 0x7e) << 1); + if (size > 0) + size -= 4; + block = (header >> 7) & 0xf; + field = (header >> 11) & 0x1; + line = (header >> 12) & 0x1ff; + cmd = (header >> 21) & 0x7; + /* Validates header fields */ + if (size > TM6000_URB_MSG_LEN) + size = TM6000_URB_MSG_LEN; + pktsize = TM6000_URB_MSG_LEN; + /* + * calculate position in buffer and change the buffer + */ + switch (cmd) { + case TM6000_URB_MSG_VIDEO: + if (!dev->radio) { + if ((dev->isoc_ctl.vfield != field) && + (field == 1)) { + /* + * Announces that a new buffer + * were filled + */ + buffer_filled(dev, dma_q, vbuf); + dprintk(dev, V4L2_DEBUG_ISOC, + "new buffer filled\n"); + get_next_buf(dma_q, &vbuf); + if (!vbuf) + return rc; + voutp = videobuf_to_vmalloc(&vbuf->vb); + if (!voutp) + return rc; + memset(voutp, 0, vbuf->vb.size); + } + linewidth = vbuf->vb.width << 1; + pos = ((line << 1) - field - 1) * + linewidth + block * TM6000_URB_MSG_LEN; + /* Don't allow to write out of the buffer */ + if (pos + size > vbuf->vb.size) + cmd = TM6000_URB_MSG_ERR; + dev->isoc_ctl.vfield = field; + } + break; + case TM6000_URB_MSG_VBI: + break; + case TM6000_URB_MSG_AUDIO: + case TM6000_URB_MSG_PTS: + size = pktsize; /* Size is always 180 bytes */ + break; + } + } else { + /* Continue the last copy */ + cmd = dev->isoc_ctl.cmd; + size = dev->isoc_ctl.size; + pos = dev->isoc_ctl.pos; + pktsize = dev->isoc_ctl.pktsize; + field = dev->isoc_ctl.field; + } + cpysize = (endp - ptr > size) ? size : endp - ptr; + if (cpysize) { + /* copy data in different buffers */ + switch (cmd) { + case TM6000_URB_MSG_VIDEO: + /* Fills video buffer */ + if (vbuf) + memcpy(&voutp[pos], ptr, cpysize); + break; + case TM6000_URB_MSG_AUDIO: { + int i; + for (i = 0; i < cpysize; i += 2) + swab16s((u16 *)(ptr + i)); + + tm6000_call_fillbuf(dev, TM6000_AUDIO, ptr, cpysize); + break; + } + case TM6000_URB_MSG_VBI: + /* Need some code to copy vbi buffer */ + break; + case TM6000_URB_MSG_PTS: { + /* Need some code to copy pts */ + u32 pts; + pts = *(u32 *)ptr; + dprintk(dev, V4L2_DEBUG_ISOC, "field %d, PTS %x", + field, pts); + break; + } + } + } + if (ptr + pktsize > endp) { + /* + * End of URB packet, but cmd processing is not + * complete. Preserve the state for a next packet + */ + dev->isoc_ctl.pos = pos + cpysize; + dev->isoc_ctl.size = size - cpysize; + dev->isoc_ctl.cmd = cmd; + dev->isoc_ctl.field = field; + dev->isoc_ctl.pktsize = pktsize - (endp - ptr); + ptr += endp - ptr; + } else { + dev->isoc_ctl.cmd = 0; + ptr += pktsize; + } + } + return 0; +} + +/* + * Identify the tm5600/6000 buffer header type and properly handles + */ +static int copy_multiplexed(u8 *ptr, unsigned long len, + struct urb *urb) +{ + struct tm6000_dmaqueue *dma_q = urb->context; + struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq); + unsigned int pos = dev->isoc_ctl.pos, cpysize; + int rc = 1; + struct tm6000_buffer *buf; + char *outp = NULL; + + get_next_buf(dma_q, &buf); + if (buf) + outp = videobuf_to_vmalloc(&buf->vb); + + if (!outp) + return 0; + + while (len > 0) { + cpysize = min(len, buf->vb.size-pos); + memcpy(&outp[pos], ptr, cpysize); + pos += cpysize; + ptr += cpysize; + len -= cpysize; + if (pos >= buf->vb.size) { + pos = 0; + /* Announces that a new buffer were filled */ + buffer_filled(dev, dma_q, buf); + dprintk(dev, V4L2_DEBUG_ISOC, "new buffer filled\n"); + get_next_buf(dma_q, &buf); + if (!buf) + break; + outp = videobuf_to_vmalloc(&(buf->vb)); + if (!outp) + return rc; + pos = 0; + } + } + + dev->isoc_ctl.pos = pos; + return rc; +} + +static inline void print_err_status(struct tm6000_core *dev, + int packet, int status) +{ + char *errmsg = "Unknown"; + + switch (status) { + case -ENOENT: + errmsg = "unlinked synchronously"; + break; + case -ECONNRESET: + errmsg = "unlinked asynchronously"; + break; + case -ENOSR: + errmsg = "Buffer error (overrun)"; + break; + case -EPIPE: + errmsg = "Stalled (device not responding)"; + break; + case -EOVERFLOW: + errmsg = "Babble (bad cable?)"; + break; + case -EPROTO: + errmsg = "Bit-stuff error (bad cable?)"; + break; + case -EILSEQ: + errmsg = "CRC/Timeout (could be anything)"; + break; + case -ETIME: + errmsg = "Device does not respond"; + break; + } + if (packet < 0) { + dprintk(dev, V4L2_DEBUG_QUEUE, "URB status %d [%s].\n", + status, errmsg); + } else { + dprintk(dev, V4L2_DEBUG_QUEUE, "URB packet %d, status %d [%s].\n", + packet, status, errmsg); + } +} + + +/* + * Controls the isoc copy of each urb packet + */ +static inline int tm6000_isoc_copy(struct urb *urb) +{ + struct tm6000_dmaqueue *dma_q = urb->context; + struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq); + int i, len = 0, rc = 1, status; + char *p; + + if (urb->status < 0) { + print_err_status(dev, -1, urb->status); + return 0; + } + + for (i = 0; i < urb->number_of_packets; i++) { + status = urb->iso_frame_desc[i].status; + + if (status < 0) { + print_err_status(dev, i, status); + continue; + } + + len = urb->iso_frame_desc[i].actual_length; + + if (len > 0) { + p = urb->transfer_buffer + urb->iso_frame_desc[i].offset; + if (!urb->iso_frame_desc[i].status) { + if ((dev->fourcc) == V4L2_PIX_FMT_TM6000) { + rc = copy_multiplexed(p, len, urb); + if (rc <= 0) + return rc; + } else { + copy_streams(p, len, urb); + } + } + } + } + return rc; +} + +/* ------------------------------------------------------------------ + * URB control + * ------------------------------------------------------------------ + */ + +/* + * IRQ callback, called by URB callback + */ +static void tm6000_irq_callback(struct urb *urb) +{ + struct tm6000_dmaqueue *dma_q = urb->context; + struct tm6000_core *dev = container_of(dma_q, struct tm6000_core, vidq); + unsigned long flags; + int i; + + switch (urb->status) { + case 0: + case -ETIMEDOUT: + break; + + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + return; + + default: + tm6000_err("urb completion error %d.\n", urb->status); + break; + } + + spin_lock_irqsave(&dev->slock, flags); + tm6000_isoc_copy(urb); + spin_unlock_irqrestore(&dev->slock, flags); + + /* Reset urb buffers */ + for (i = 0; i < urb->number_of_packets; i++) { + urb->iso_frame_desc[i].status = 0; + urb->iso_frame_desc[i].actual_length = 0; + } + + urb->status = usb_submit_urb(urb, GFP_ATOMIC); + if (urb->status) + tm6000_err("urb resubmit failed (error=%i)\n", + urb->status); +} + +/* + * Allocate URB buffers + */ +static int tm6000_alloc_urb_buffers(struct tm6000_core *dev) +{ + int num_bufs = TM6000_NUM_URB_BUF; + int i; + + if (dev->urb_buffer) + return 0; + + dev->urb_buffer = kmalloc_array(num_bufs, sizeof(*dev->urb_buffer), + GFP_KERNEL); + if (!dev->urb_buffer) + return -ENOMEM; + + dev->urb_dma = kmalloc_array(num_bufs, sizeof(*dev->urb_dma), + GFP_KERNEL); + if (!dev->urb_dma) + return -ENOMEM; + + for (i = 0; i < num_bufs; i++) { + dev->urb_buffer[i] = usb_alloc_coherent( + dev->udev, dev->urb_size, + GFP_KERNEL, &dev->urb_dma[i]); + if (!dev->urb_buffer[i]) { + tm6000_err("unable to allocate %i bytes for transfer buffer %i\n", + dev->urb_size, i); + return -ENOMEM; + } + memset(dev->urb_buffer[i], 0, dev->urb_size); + } + + return 0; +} + +/* + * Free URB buffers + */ +static int tm6000_free_urb_buffers(struct tm6000_core *dev) +{ + int i; + + if (!dev->urb_buffer) + return 0; + + for (i = 0; i < TM6000_NUM_URB_BUF; i++) { + if (dev->urb_buffer[i]) { + usb_free_coherent(dev->udev, + dev->urb_size, + dev->urb_buffer[i], + dev->urb_dma[i]); + dev->urb_buffer[i] = NULL; + } + } + kfree(dev->urb_buffer); + kfree(dev->urb_dma); + dev->urb_buffer = NULL; + dev->urb_dma = NULL; + + return 0; +} + +/* + * Stop and Deallocate URBs + */ +static void tm6000_uninit_isoc(struct tm6000_core *dev) +{ + struct urb *urb; + int i; + + dev->isoc_ctl.buf = NULL; + for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { + urb = dev->isoc_ctl.urb[i]; + if (urb) { + usb_kill_urb(urb); + usb_unlink_urb(urb); + usb_free_urb(urb); + dev->isoc_ctl.urb[i] = NULL; + } + dev->isoc_ctl.transfer_buffer[i] = NULL; + } + + if (!keep_urb) + tm6000_free_urb_buffers(dev); + + kfree(dev->isoc_ctl.urb); + kfree(dev->isoc_ctl.transfer_buffer); + + dev->isoc_ctl.urb = NULL; + dev->isoc_ctl.transfer_buffer = NULL; + dev->isoc_ctl.num_bufs = 0; +} + +/* + * Assign URBs and start IRQ + */ +static int tm6000_prepare_isoc(struct tm6000_core *dev) +{ + struct tm6000_dmaqueue *dma_q = &dev->vidq; + int i, j, sb_size, pipe, size, max_packets; + int num_bufs = TM6000_NUM_URB_BUF; + struct urb *urb; + + /* De-allocates all pending stuff */ + tm6000_uninit_isoc(dev); + /* Stop interrupt USB pipe */ + tm6000_ir_int_stop(dev); + + usb_set_interface(dev->udev, + dev->isoc_in.bInterfaceNumber, + dev->isoc_in.bAlternateSetting); + + /* Start interrupt USB pipe */ + tm6000_ir_int_start(dev); + + pipe = usb_rcvisocpipe(dev->udev, + dev->isoc_in.endp->desc.bEndpointAddress & + USB_ENDPOINT_NUMBER_MASK); + + size = usb_maxpacket(dev->udev, pipe, usb_pipeout(pipe)); + + if (size > dev->isoc_in.maxsize) + size = dev->isoc_in.maxsize; + + dev->isoc_ctl.max_pkt_size = size; + + max_packets = TM6000_MAX_ISO_PACKETS; + sb_size = max_packets * size; + dev->urb_size = sb_size; + + dev->isoc_ctl.num_bufs = num_bufs; + + dev->isoc_ctl.urb = kmalloc_array(num_bufs, sizeof(void *), + GFP_KERNEL); + if (!dev->isoc_ctl.urb) + return -ENOMEM; + + dev->isoc_ctl.transfer_buffer = kmalloc_array(num_bufs, + sizeof(void *), + GFP_KERNEL); + if (!dev->isoc_ctl.transfer_buffer) { + kfree(dev->isoc_ctl.urb); + return -ENOMEM; + } + + dprintk(dev, V4L2_DEBUG_QUEUE, "Allocating %d x %d packets (%d bytes) of %d bytes each to handle %u size\n", + max_packets, num_bufs, sb_size, + dev->isoc_in.maxsize, size); + + + if (tm6000_alloc_urb_buffers(dev) < 0) { + tm6000_err("cannot allocate memory for urb buffers\n"); + + /* call free, as some buffers might have been allocated */ + tm6000_free_urb_buffers(dev); + kfree(dev->isoc_ctl.urb); + kfree(dev->isoc_ctl.transfer_buffer); + return -ENOMEM; + } + + /* allocate urbs and transfer buffers */ + for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { + urb = usb_alloc_urb(max_packets, GFP_KERNEL); + if (!urb) { + tm6000_uninit_isoc(dev); + tm6000_free_urb_buffers(dev); + return -ENOMEM; + } + dev->isoc_ctl.urb[i] = urb; + + urb->transfer_dma = dev->urb_dma[i]; + dev->isoc_ctl.transfer_buffer[i] = dev->urb_buffer[i]; + + usb_fill_bulk_urb(urb, dev->udev, pipe, + dev->isoc_ctl.transfer_buffer[i], sb_size, + tm6000_irq_callback, dma_q); + urb->interval = dev->isoc_in.endp->desc.bInterval; + urb->number_of_packets = max_packets; + urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; + + for (j = 0; j < max_packets; j++) { + urb->iso_frame_desc[j].offset = size * j; + urb->iso_frame_desc[j].length = size; + } + } + + return 0; +} + +static int tm6000_start_thread(struct tm6000_core *dev) +{ + struct tm6000_dmaqueue *dma_q = &dev->vidq; + int i; + + dma_q->frame = 0; + dma_q->ini_jiffies = jiffies; + + init_waitqueue_head(&dma_q->wq); + + /* submit urbs and enables IRQ */ + for (i = 0; i < dev->isoc_ctl.num_bufs; i++) { + int rc = usb_submit_urb(dev->isoc_ctl.urb[i], GFP_ATOMIC); + if (rc) { + tm6000_err("submit of urb %i failed (error=%i)\n", i, + rc); + tm6000_uninit_isoc(dev); + return rc; + } + } + + return 0; +} + +/* ------------------------------------------------------------------ + * Videobuf operations + * ------------------------------------------------------------------ + */ + +static int +buffer_setup(struct videobuf_queue *vq, unsigned int *count, unsigned int *size) +{ + struct tm6000_fh *fh = vq->priv_data; + + *size = fh->fmt->depth * fh->width * fh->height >> 3; + if (0 == *count) + *count = TM6000_DEF_BUF; + + if (*count < TM6000_MIN_BUF) + *count = TM6000_MIN_BUF; + + while (*size * *count > vid_limit * 1024 * 1024) + (*count)--; + + return 0; +} + +static void free_buffer(struct videobuf_queue *vq, struct tm6000_buffer *buf) +{ + struct tm6000_fh *fh = vq->priv_data; + struct tm6000_core *dev = fh->dev; + unsigned long flags; + + BUG_ON(in_interrupt()); + + /* We used to wait for the buffer to finish here, but this didn't work + because, as we were keeping the state as VIDEOBUF_QUEUED, + videobuf_queue_cancel marked it as finished for us. + (Also, it could wedge forever if the hardware was misconfigured.) + + This should be safe; by the time we get here, the buffer isn't + queued anymore. If we ever start marking the buffers as + VIDEOBUF_ACTIVE, it won't be, though. + */ + spin_lock_irqsave(&dev->slock, flags); + if (dev->isoc_ctl.buf == buf) + dev->isoc_ctl.buf = NULL; + spin_unlock_irqrestore(&dev->slock, flags); + + videobuf_vmalloc_free(&buf->vb); + buf->vb.state = VIDEOBUF_NEEDS_INIT; +} + +static int +buffer_prepare(struct videobuf_queue *vq, struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct tm6000_fh *fh = vq->priv_data; + struct tm6000_buffer *buf = container_of(vb, struct tm6000_buffer, vb); + struct tm6000_core *dev = fh->dev; + int rc = 0; + + BUG_ON(NULL == fh->fmt); + + + /* FIXME: It assumes depth=2 */ + /* The only currently supported format is 16 bits/pixel */ + buf->vb.size = fh->fmt->depth*fh->width*fh->height >> 3; + if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) + return -EINVAL; + + if (buf->fmt != fh->fmt || + buf->vb.width != fh->width || + buf->vb.height != fh->height || + buf->vb.field != field) { + buf->fmt = fh->fmt; + buf->vb.width = fh->width; + buf->vb.height = fh->height; + buf->vb.field = field; + buf->vb.state = VIDEOBUF_NEEDS_INIT; + } + + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { + rc = videobuf_iolock(vq, &buf->vb, NULL); + if (rc != 0) + goto fail; + } + + if (!dev->isoc_ctl.num_bufs) { + rc = tm6000_prepare_isoc(dev); + if (rc < 0) + goto fail; + + rc = tm6000_start_thread(dev); + if (rc < 0) + goto fail; + + } + + buf->vb.state = VIDEOBUF_PREPARED; + return 0; + +fail: + free_buffer(vq, buf); + return rc; +} + +static void +buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) +{ + struct tm6000_buffer *buf = container_of(vb, struct tm6000_buffer, vb); + struct tm6000_fh *fh = vq->priv_data; + struct tm6000_core *dev = fh->dev; + struct tm6000_dmaqueue *vidq = &dev->vidq; + + buf->vb.state = VIDEOBUF_QUEUED; + list_add_tail(&buf->vb.queue, &vidq->active); +} + +static void buffer_release(struct videobuf_queue *vq, struct videobuf_buffer *vb) +{ + struct tm6000_buffer *buf = container_of(vb, struct tm6000_buffer, vb); + + free_buffer(vq, buf); +} + +static const struct videobuf_queue_ops tm6000_video_qops = { + .buf_setup = buffer_setup, + .buf_prepare = buffer_prepare, + .buf_queue = buffer_queue, + .buf_release = buffer_release, +}; + +/* ------------------------------------------------------------------ + * IOCTL handling + * ------------------------------------------------------------------ + */ + +static bool is_res_read(struct tm6000_core *dev, struct tm6000_fh *fh) +{ + /* Is the current fh handling it? if so, that's OK */ + if (dev->resources == fh && dev->is_res_read) + return true; + + return false; +} + +static bool is_res_streaming(struct tm6000_core *dev, struct tm6000_fh *fh) +{ + /* Is the current fh handling it? if so, that's OK */ + if (dev->resources == fh) + return true; + + return false; +} + +static bool res_get(struct tm6000_core *dev, struct tm6000_fh *fh, + bool is_res_read) +{ + /* Is the current fh handling it? if so, that's OK */ + if (dev->resources == fh && dev->is_res_read == is_res_read) + return true; + + /* is it free? */ + if (dev->resources) + return false; + + /* grab it */ + dev->resources = fh; + dev->is_res_read = is_res_read; + dprintk(dev, V4L2_DEBUG_RES_LOCK, "res: get\n"); + return true; +} + +static void res_free(struct tm6000_core *dev, struct tm6000_fh *fh) +{ + /* Is the current fh handling it? if so, that's OK */ + if (dev->resources != fh) + return; + + dev->resources = NULL; + dprintk(dev, V4L2_DEBUG_RES_LOCK, "res: put\n"); +} + +/* ------------------------------------------------------------------ + * IOCTL vidioc handling + * ------------------------------------------------------------------ + */ +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct tm6000_core *dev = ((struct tm6000_fh *)priv)->dev; + + strscpy(cap->driver, "tm6000", sizeof(cap->driver)); + strscpy(cap->card, "Trident TM5600/6000/6010", sizeof(cap->card)); + usb_make_path(dev->udev, cap->bus_info, sizeof(cap->bus_info)); + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | + V4L2_CAP_DEVICE_CAPS; + if (dev->tuner_type != TUNER_ABSENT) + cap->capabilities |= V4L2_CAP_TUNER; + if (dev->caps.has_radio) + cap->capabilities |= V4L2_CAP_RADIO; + + return 0; +} + +static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + if (f->index >= ARRAY_SIZE(format)) + return -EINVAL; + + f->pixelformat = format[f->index].fourcc; + return 0; +} + +static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct tm6000_fh *fh = priv; + + f->fmt.pix.width = fh->width; + f->fmt.pix.height = fh->height; + f->fmt.pix.field = fh->vb_vidq.field; + f->fmt.pix.pixelformat = fh->fmt->fourcc; + f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; + f->fmt.pix.bytesperline = + (f->fmt.pix.width * fh->fmt->depth) >> 3; + f->fmt.pix.sizeimage = + f->fmt.pix.height * f->fmt.pix.bytesperline; + + return 0; +} + +static struct tm6000_fmt *format_by_fourcc(unsigned int fourcc) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(format); i++) + if (format[i].fourcc == fourcc) + return format+i; + return NULL; +} + +static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct tm6000_core *dev = ((struct tm6000_fh *)priv)->dev; + struct tm6000_fmt *fmt; + enum v4l2_field field; + + fmt = format_by_fourcc(f->fmt.pix.pixelformat); + if (NULL == fmt) { + dprintk(dev, 2, "Fourcc format (0x%08x) invalid.\n", + f->fmt.pix.pixelformat); + return -EINVAL; + } + + field = f->fmt.pix.field; + + field = V4L2_FIELD_INTERLACED; + + tm6000_get_std_res(dev); + + f->fmt.pix.width = dev->width; + f->fmt.pix.height = dev->height; + + f->fmt.pix.width &= ~0x01; + + f->fmt.pix.field = field; + + f->fmt.pix.bytesperline = + (f->fmt.pix.width * fmt->depth) >> 3; + f->fmt.pix.sizeimage = + f->fmt.pix.height * f->fmt.pix.bytesperline; + f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M; + + return 0; +} + +/*FIXME: This seems to be generic enough to be at videodev2 */ +static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct tm6000_fh *fh = priv; + struct tm6000_core *dev = fh->dev; + int ret = vidioc_try_fmt_vid_cap(file, fh, f); + if (ret < 0) + return ret; + + fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat); + fh->width = f->fmt.pix.width; + fh->height = f->fmt.pix.height; + fh->vb_vidq.field = f->fmt.pix.field; + fh->type = f->type; + + dev->fourcc = f->fmt.pix.pixelformat; + + tm6000_set_fourcc_format(dev); + + return 0; +} + +static int vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *p) +{ + struct tm6000_fh *fh = priv; + + return videobuf_reqbufs(&fh->vb_vidq, p); +} + +static int vidioc_querybuf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct tm6000_fh *fh = priv; + + return videobuf_querybuf(&fh->vb_vidq, p); +} + +static int vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *p) +{ + struct tm6000_fh *fh = priv; + + return videobuf_qbuf(&fh->vb_vidq, p); +} + +static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p) +{ + struct tm6000_fh *fh = priv; + + return videobuf_dqbuf(&fh->vb_vidq, p, + file->f_flags & O_NONBLOCK); +} + +static int vidioc_streamon(struct file *file, void *priv, enum v4l2_buf_type i) +{ + struct tm6000_fh *fh = priv; + struct tm6000_core *dev = fh->dev; + + if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + if (i != fh->type) + return -EINVAL; + + if (!res_get(dev, fh, false)) + return -EBUSY; + return videobuf_streamon(&fh->vb_vidq); +} + +static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) +{ + struct tm6000_fh *fh = priv; + struct tm6000_core *dev = fh->dev; + + if (fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (i != fh->type) + return -EINVAL; + + videobuf_streamoff(&fh->vb_vidq); + res_free(dev, fh); + + return 0; +} + +static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id norm) +{ + int rc = 0; + struct tm6000_fh *fh = priv; + struct tm6000_core *dev = fh->dev; + + dev->norm = norm; + rc = tm6000_init_analog_mode(dev); + + fh->width = dev->width; + fh->height = dev->height; + + if (rc < 0) + return rc; + + v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_std, dev->norm); + + return 0; +} + +static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *norm) +{ + struct tm6000_fh *fh = priv; + struct tm6000_core *dev = fh->dev; + + *norm = dev->norm; + return 0; +} + +static const char *iname[] = { + [TM6000_INPUT_TV] = "Television", + [TM6000_INPUT_COMPOSITE1] = "Composite 1", + [TM6000_INPUT_COMPOSITE2] = "Composite 2", + [TM6000_INPUT_SVIDEO] = "S-Video", +}; + +static int vidioc_enum_input(struct file *file, void *priv, + struct v4l2_input *i) +{ + struct tm6000_fh *fh = priv; + struct tm6000_core *dev = fh->dev; + unsigned int n; + + n = i->index; + if (n >= 3) + return -EINVAL; + + if (!dev->vinput[n].type) + return -EINVAL; + + i->index = n; + + if (dev->vinput[n].type == TM6000_INPUT_TV) + i->type = V4L2_INPUT_TYPE_TUNER; + else + i->type = V4L2_INPUT_TYPE_CAMERA; + + strscpy(i->name, iname[dev->vinput[n].type], sizeof(i->name)); + + i->std = TM6000_STD; + + return 0; +} + +static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) +{ + struct tm6000_fh *fh = priv; + struct tm6000_core *dev = fh->dev; + + *i = dev->input; + + return 0; +} + +static int vidioc_s_input(struct file *file, void *priv, unsigned int i) +{ + struct tm6000_fh *fh = priv; + struct tm6000_core *dev = fh->dev; + int rc = 0; + + if (i >= 3) + return -EINVAL; + if (!dev->vinput[i].type) + return -EINVAL; + + dev->input = i; + + rc = vidioc_s_std(file, priv, dev->norm); + + return rc; +} + +/* --- controls ---------------------------------------------- */ + +static int tm6000_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct tm6000_core *dev = container_of(ctrl->handler, struct tm6000_core, ctrl_handler); + u8 val = ctrl->val; + + switch (ctrl->id) { + case V4L2_CID_CONTRAST: + tm6000_set_reg(dev, TM6010_REQ07_R08_LUMA_CONTRAST_ADJ, val); + return 0; + case V4L2_CID_BRIGHTNESS: + tm6000_set_reg(dev, TM6010_REQ07_R09_LUMA_BRIGHTNESS_ADJ, val); + return 0; + case V4L2_CID_SATURATION: + tm6000_set_reg(dev, TM6010_REQ07_R0A_CHROMA_SATURATION_ADJ, val); + return 0; + case V4L2_CID_HUE: + tm6000_set_reg(dev, TM6010_REQ07_R0B_CHROMA_HUE_PHASE_ADJ, val); + return 0; + } + return -EINVAL; +} + +static const struct v4l2_ctrl_ops tm6000_ctrl_ops = { + .s_ctrl = tm6000_s_ctrl, +}; + +static int tm6000_radio_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct tm6000_core *dev = container_of(ctrl->handler, + struct tm6000_core, radio_ctrl_handler); + u8 val = ctrl->val; + + switch (ctrl->id) { + case V4L2_CID_AUDIO_MUTE: + dev->ctl_mute = val; + tm6000_tvaudio_set_mute(dev, val); + return 0; + case V4L2_CID_AUDIO_VOLUME: + dev->ctl_volume = val; + tm6000_set_volume(dev, val); + return 0; + } + return -EINVAL; +} + +static const struct v4l2_ctrl_ops tm6000_radio_ctrl_ops = { + .s_ctrl = tm6000_radio_s_ctrl, +}; + +static int vidioc_g_tuner(struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct tm6000_fh *fh = priv; + struct tm6000_core *dev = fh->dev; + + if (UNSET == dev->tuner_type) + return -ENOTTY; + if (0 != t->index) + return -EINVAL; + + strscpy(t->name, "Television", sizeof(t->name)); + t->type = V4L2_TUNER_ANALOG_TV; + t->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO; + t->rangehigh = 0xffffffffUL; + t->rxsubchans = V4L2_TUNER_SUB_STEREO; + + v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_tuner, t); + + t->audmode = dev->amode; + + return 0; +} + +static int vidioc_s_tuner(struct file *file, void *priv, + const struct v4l2_tuner *t) +{ + struct tm6000_fh *fh = priv; + struct tm6000_core *dev = fh->dev; + + if (UNSET == dev->tuner_type) + return -ENOTTY; + if (0 != t->index) + return -EINVAL; + + if (t->audmode > V4L2_TUNER_MODE_STEREO) + dev->amode = V4L2_TUNER_MODE_STEREO; + else + dev->amode = t->audmode; + dprintk(dev, 3, "audio mode: %x\n", t->audmode); + + v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_tuner, t); + + return 0; +} + +static int vidioc_g_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct tm6000_fh *fh = priv; + struct tm6000_core *dev = fh->dev; + + if (UNSET == dev->tuner_type) + return -ENOTTY; + if (f->tuner) + return -EINVAL; + + f->frequency = dev->freq; + + v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_frequency, f); + + return 0; +} + +static int vidioc_s_frequency(struct file *file, void *priv, + const struct v4l2_frequency *f) +{ + struct tm6000_fh *fh = priv; + struct tm6000_core *dev = fh->dev; + + if (UNSET == dev->tuner_type) + return -ENOTTY; + if (f->tuner != 0) + return -EINVAL; + + dev->freq = f->frequency; + v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, f); + + return 0; +} + +static int radio_g_tuner(struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct tm6000_fh *fh = file->private_data; + struct tm6000_core *dev = fh->dev; + + if (0 != t->index) + return -EINVAL; + + memset(t, 0, sizeof(*t)); + strscpy(t->name, "Radio", sizeof(t->name)); + t->type = V4L2_TUNER_RADIO; + t->capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO; + t->rxsubchans = V4L2_TUNER_SUB_STEREO; + t->audmode = V4L2_TUNER_MODE_STEREO; + + v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, g_tuner, t); + + return 0; +} + +static int radio_s_tuner(struct file *file, void *priv, + const struct v4l2_tuner *t) +{ + struct tm6000_fh *fh = file->private_data; + struct tm6000_core *dev = fh->dev; + + if (0 != t->index) + return -EINVAL; + v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_tuner, t); + return 0; +} + +/* ------------------------------------------------------------------ + File operations for the device + ------------------------------------------------------------------*/ + +static int __tm6000_open(struct file *file) +{ + struct video_device *vdev = video_devdata(file); + struct tm6000_core *dev = video_drvdata(file); + struct tm6000_fh *fh; + enum v4l2_buf_type type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + int rc; + int radio = 0; + + dprintk(dev, V4L2_DEBUG_OPEN, "tm6000: open called (dev=%s)\n", + video_device_node_name(vdev)); + + switch (vdev->vfl_type) { + case VFL_TYPE_VIDEO: + type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + break; + case VFL_TYPE_VBI: + type = V4L2_BUF_TYPE_VBI_CAPTURE; + break; + case VFL_TYPE_RADIO: + radio = 1; + break; + default: + return -EINVAL; + } + + /* If more than one user, mutex should be added */ + dev->users++; + + dprintk(dev, V4L2_DEBUG_OPEN, "open dev=%s type=%s users=%d\n", + video_device_node_name(vdev), v4l2_type_names[type], + dev->users); + + /* allocate + initialize per filehandle data */ + fh = kzalloc(sizeof(*fh), GFP_KERNEL); + if (NULL == fh) { + dev->users--; + return -ENOMEM; + } + + v4l2_fh_init(&fh->fh, vdev); + file->private_data = fh; + fh->dev = dev; + fh->radio = radio; + dev->radio = radio; + fh->type = type; + dev->fourcc = format[0].fourcc; + + fh->fmt = format_by_fourcc(dev->fourcc); + + tm6000_get_std_res(dev); + + fh->width = dev->width; + fh->height = dev->height; + + dprintk(dev, V4L2_DEBUG_OPEN, "Open: fh=%p, dev=%p, dev->vidq=%p\n", + fh, dev, &dev->vidq); + dprintk(dev, V4L2_DEBUG_OPEN, "Open: list_empty queued=%d\n", + list_empty(&dev->vidq.queued)); + dprintk(dev, V4L2_DEBUG_OPEN, "Open: list_empty active=%d\n", + list_empty(&dev->vidq.active)); + + /* initialize hardware on analog mode */ + rc = tm6000_init_analog_mode(dev); + if (rc < 0) { + v4l2_fh_exit(&fh->fh); + kfree(fh); + return rc; + } + + dev->mode = TM6000_MODE_ANALOG; + + if (!fh->radio) { + videobuf_queue_vmalloc_init(&fh->vb_vidq, &tm6000_video_qops, + NULL, &dev->slock, + fh->type, + V4L2_FIELD_INTERLACED, + sizeof(struct tm6000_buffer), fh, &dev->lock); + } else { + dprintk(dev, V4L2_DEBUG_OPEN, "video_open: setting radio device\n"); + tm6000_set_audio_rinput(dev); + v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_radio); + tm6000_prepare_isoc(dev); + tm6000_start_thread(dev); + } + v4l2_fh_add(&fh->fh); + + return 0; +} + +static int tm6000_open(struct file *file) +{ + struct video_device *vdev = video_devdata(file); + int res; + + mutex_lock(vdev->lock); + res = __tm6000_open(file); + mutex_unlock(vdev->lock); + return res; +} + +static ssize_t +tm6000_read(struct file *file, char __user *data, size_t count, loff_t *pos) +{ + struct tm6000_fh *fh = file->private_data; + struct tm6000_core *dev = fh->dev; + + if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { + int res; + + if (!res_get(fh->dev, fh, true)) + return -EBUSY; + + if (mutex_lock_interruptible(&dev->lock)) + return -ERESTARTSYS; + res = videobuf_read_stream(&fh->vb_vidq, data, count, pos, 0, + file->f_flags & O_NONBLOCK); + mutex_unlock(&dev->lock); + return res; + } + return 0; +} + +static __poll_t +__tm6000_poll(struct file *file, struct poll_table_struct *wait) +{ + __poll_t req_events = poll_requested_events(wait); + struct tm6000_fh *fh = file->private_data; + struct tm6000_buffer *buf; + __poll_t res = 0; + + if (v4l2_event_pending(&fh->fh)) + res = EPOLLPRI; + else if (req_events & EPOLLPRI) + poll_wait(file, &fh->fh.wait, wait); + if (V4L2_BUF_TYPE_VIDEO_CAPTURE != fh->type) + return res | EPOLLERR; + + if (!!is_res_streaming(fh->dev, fh)) + return res | EPOLLERR; + + if (!is_res_read(fh->dev, fh)) { + /* streaming capture */ + if (list_empty(&fh->vb_vidq.stream)) + return res | EPOLLERR; + buf = list_entry(fh->vb_vidq.stream.next, struct tm6000_buffer, vb.stream); + poll_wait(file, &buf->vb.done, wait); + if (buf->vb.state == VIDEOBUF_DONE || + buf->vb.state == VIDEOBUF_ERROR) + return res | EPOLLIN | EPOLLRDNORM; + } else if (req_events & (EPOLLIN | EPOLLRDNORM)) { + /* read() capture */ + return res | videobuf_poll_stream(file, &fh->vb_vidq, wait); + } + return res; +} + +static __poll_t tm6000_poll(struct file *file, struct poll_table_struct *wait) +{ + struct tm6000_fh *fh = file->private_data; + struct tm6000_core *dev = fh->dev; + __poll_t res; + + mutex_lock(&dev->lock); + res = __tm6000_poll(file, wait); + mutex_unlock(&dev->lock); + return res; +} + +static int tm6000_release(struct file *file) +{ + struct tm6000_fh *fh = file->private_data; + struct tm6000_core *dev = fh->dev; + struct video_device *vdev = video_devdata(file); + + dprintk(dev, V4L2_DEBUG_OPEN, "tm6000: close called (dev=%s, users=%d)\n", + video_device_node_name(vdev), dev->users); + + mutex_lock(&dev->lock); + dev->users--; + + res_free(dev, fh); + + if (!dev->users) { + tm6000_uninit_isoc(dev); + + /* Stop interrupt USB pipe */ + tm6000_ir_int_stop(dev); + + usb_reset_configuration(dev->udev); + + if (dev->int_in.endp) + usb_set_interface(dev->udev, + dev->isoc_in.bInterfaceNumber, 2); + else + usb_set_interface(dev->udev, + dev->isoc_in.bInterfaceNumber, 0); + + /* Start interrupt USB pipe */ + tm6000_ir_int_start(dev); + + if (!fh->radio) + videobuf_mmap_free(&fh->vb_vidq); + } + v4l2_fh_del(&fh->fh); + v4l2_fh_exit(&fh->fh); + kfree(fh); + mutex_unlock(&dev->lock); + + return 0; +} + +static int tm6000_mmap(struct file *file, struct vm_area_struct * vma) +{ + struct tm6000_fh *fh = file->private_data; + struct tm6000_core *dev = fh->dev; + int res; + + if (mutex_lock_interruptible(&dev->lock)) + return -ERESTARTSYS; + res = videobuf_mmap_mapper(&fh->vb_vidq, vma); + mutex_unlock(&dev->lock); + return res; +} + +static const struct v4l2_file_operations tm6000_fops = { + .owner = THIS_MODULE, + .open = tm6000_open, + .release = tm6000_release, + .unlocked_ioctl = video_ioctl2, /* V4L2 ioctl handler */ + .read = tm6000_read, + .poll = tm6000_poll, + .mmap = tm6000_mmap, +}; + +static const struct v4l2_ioctl_ops video_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, + .vidioc_s_std = vidioc_s_std, + .vidioc_g_std = vidioc_g_std, + .vidioc_enum_input = vidioc_enum_input, + .vidioc_g_input = vidioc_g_input, + .vidioc_s_input = vidioc_s_input, + .vidioc_g_tuner = vidioc_g_tuner, + .vidioc_s_tuner = vidioc_s_tuner, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +static struct video_device tm6000_template = { + .name = "tm6000", + .fops = &tm6000_fops, + .ioctl_ops = &video_ioctl_ops, + .release = video_device_release_empty, + .tvnorms = TM6000_STD, +}; + +static const struct v4l2_file_operations radio_fops = { + .owner = THIS_MODULE, + .open = tm6000_open, + .poll = v4l2_ctrl_poll, + .release = tm6000_release, + .unlocked_ioctl = video_ioctl2, +}; + +static const struct v4l2_ioctl_ops radio_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_g_tuner = radio_g_tuner, + .vidioc_s_tuner = radio_s_tuner, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, + .vidioc_subscribe_event = v4l2_ctrl_subscribe_event, + .vidioc_unsubscribe_event = v4l2_event_unsubscribe, +}; + +static struct video_device tm6000_radio_template = { + .name = "tm6000", + .fops = &radio_fops, + .ioctl_ops = &radio_ioctl_ops, +}; + +/* ----------------------------------------------------------------- + * Initialization and module stuff + * ------------------------------------------------------------------ + */ + +static void vdev_init(struct tm6000_core *dev, + struct video_device *vfd, + const struct video_device + *template, const char *type_name) +{ + *vfd = *template; + vfd->v4l2_dev = &dev->v4l2_dev; + vfd->release = video_device_release_empty; + vfd->lock = &dev->lock; + + snprintf(vfd->name, sizeof(vfd->name), "%s %s", dev->name, type_name); + + video_set_drvdata(vfd, dev); +} + +int tm6000_v4l2_register(struct tm6000_core *dev) +{ + int ret = 0; + + v4l2_ctrl_handler_init(&dev->ctrl_handler, 6); + v4l2_ctrl_handler_init(&dev->radio_ctrl_handler, 2); + v4l2_ctrl_new_std(&dev->radio_ctrl_handler, &tm6000_radio_ctrl_ops, + V4L2_CID_AUDIO_MUTE, 0, 1, 1, 0); + v4l2_ctrl_new_std(&dev->radio_ctrl_handler, &tm6000_radio_ctrl_ops, + V4L2_CID_AUDIO_VOLUME, -15, 15, 1, 0); + v4l2_ctrl_new_std(&dev->ctrl_handler, &tm6000_ctrl_ops, + V4L2_CID_BRIGHTNESS, 0, 255, 1, 54); + v4l2_ctrl_new_std(&dev->ctrl_handler, &tm6000_ctrl_ops, + V4L2_CID_CONTRAST, 0, 255, 1, 119); + v4l2_ctrl_new_std(&dev->ctrl_handler, &tm6000_ctrl_ops, + V4L2_CID_SATURATION, 0, 255, 1, 112); + v4l2_ctrl_new_std(&dev->ctrl_handler, &tm6000_ctrl_ops, + V4L2_CID_HUE, -128, 127, 1, 0); + v4l2_ctrl_add_handler(&dev->ctrl_handler, + &dev->radio_ctrl_handler, NULL, false); + + if (dev->radio_ctrl_handler.error) + ret = dev->radio_ctrl_handler.error; + if (!ret && dev->ctrl_handler.error) + ret = dev->ctrl_handler.error; + if (ret) + goto free_ctrl; + + vdev_init(dev, &dev->vfd, &tm6000_template, "video"); + + dev->vfd.ctrl_handler = &dev->ctrl_handler; + dev->vfd.device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | + V4L2_CAP_READWRITE; + if (dev->tuner_type != TUNER_ABSENT) + dev->vfd.device_caps |= V4L2_CAP_TUNER; + + /* init video dma queues */ + INIT_LIST_HEAD(&dev->vidq.active); + INIT_LIST_HEAD(&dev->vidq.queued); + + ret = video_register_device(&dev->vfd, VFL_TYPE_VIDEO, video_nr); + + if (ret < 0) { + printk(KERN_INFO "%s: can't register video device\n", + dev->name); + goto free_ctrl; + } + + printk(KERN_INFO "%s: registered device %s\n", + dev->name, video_device_node_name(&dev->vfd)); + + if (dev->caps.has_radio) { + vdev_init(dev, &dev->radio_dev, &tm6000_radio_template, + "radio"); + dev->radio_dev.ctrl_handler = &dev->radio_ctrl_handler; + dev->radio_dev.device_caps = V4L2_CAP_RADIO | V4L2_CAP_TUNER; + ret = video_register_device(&dev->radio_dev, VFL_TYPE_RADIO, + radio_nr); + if (ret < 0) { + printk(KERN_INFO "%s: can't register radio device\n", + dev->name); + goto unreg_video; + } + + printk(KERN_INFO "%s: registered device %s\n", + dev->name, video_device_node_name(&dev->radio_dev)); + } + + printk(KERN_INFO "Trident TVMaster TM5600/TM6000/TM6010 USB2 board (Load status: %d)\n", ret); + return ret; + +unreg_video: + video_unregister_device(&dev->vfd); +free_ctrl: + v4l2_ctrl_handler_free(&dev->ctrl_handler); + v4l2_ctrl_handler_free(&dev->radio_ctrl_handler); + return ret; +} + +int tm6000_v4l2_unregister(struct tm6000_core *dev) +{ + video_unregister_device(&dev->vfd); + + /* if URB buffers are still allocated free them now */ + tm6000_free_urb_buffers(dev); + + video_unregister_device(&dev->radio_dev); + return 0; +} + +int tm6000_v4l2_exit(void) +{ + return 0; +} + +module_param(video_nr, int, 0); +MODULE_PARM_DESC(video_nr, "Allow changing video device number"); + +module_param_named(debug, tm6000_debug, int, 0444); +MODULE_PARM_DESC(debug, "activates debug info"); + +module_param(vid_limit, int, 0644); +MODULE_PARM_DESC(vid_limit, "capture memory limit in megabytes"); + +module_param(keep_urb, bool, 0); +MODULE_PARM_DESC(keep_urb, "Keep urb buffers allocated even when the device is closed by the user"); diff --git a/drivers/media/usb/tm6000/tm6000.h b/drivers/media/usb/tm6000/tm6000.h new file mode 100644 index 000000000..c08c95312 --- /dev/null +++ b/drivers/media/usb/tm6000/tm6000.h @@ -0,0 +1,396 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * tm6000.h - driver for TM5600/TM6000/TM6010 USB video capture devices + * + * Copyright (c) 2006-2007 Mauro Carvalho Chehab <mchehab@kernel.org> + * + * Copyright (c) 2007 Michel Ludwig <michel.ludwig@gmail.com> + * - DVB-T support + */ + +#include <linux/videodev2.h> +#include <media/v4l2-common.h> +#include <media/videobuf-vmalloc.h> +#include "tm6000-usb-isoc.h" +#include <linux/i2c.h> +#include <linux/mutex.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-fh.h> + +#include <linux/dvb/frontend.h> +#include <media/dvb_demux.h> +#include <media/dvb_frontend.h> +#include <media/dmxdev.h> + +/* Inputs */ +enum tm6000_itype { + TM6000_INPUT_TV = 1, + TM6000_INPUT_COMPOSITE1, + TM6000_INPUT_COMPOSITE2, + TM6000_INPUT_SVIDEO, + TM6000_INPUT_DVB, + TM6000_INPUT_RADIO, +}; + +enum tm6000_mux { + TM6000_VMUX_VIDEO_A = 1, + TM6000_VMUX_VIDEO_B, + TM6000_VMUX_VIDEO_AB, + TM6000_AMUX_ADC1, + TM6000_AMUX_ADC2, + TM6000_AMUX_SIF1, + TM6000_AMUX_SIF2, + TM6000_AMUX_I2S, +}; + +enum tm6000_devtype { + TM6000 = 0, + TM5600, + TM6010, +}; + +struct tm6000_input { + enum tm6000_itype type; + enum tm6000_mux vmux; + enum tm6000_mux amux; + unsigned int v_gpio; + unsigned int a_gpio; +}; + +/* ------------------------------------------------------------------ + * Basic structures + * ------------------------------------------------------------------ + */ + +struct tm6000_fmt { + u32 fourcc; /* v4l2 format id */ + int depth; +}; + +/* buffer for one video frame */ +struct tm6000_buffer { + /* common v4l buffer stuff -- must be first */ + struct videobuf_buffer vb; + + struct tm6000_fmt *fmt; +}; + +struct tm6000_dmaqueue { + struct list_head active; + struct list_head queued; + + /* thread for generating video stream*/ + struct task_struct *kthread; + wait_queue_head_t wq; + /* Counters to control fps rate */ + int frame; + int ini_jiffies; +}; + +/* device states */ +enum tm6000_core_state { + DEV_INITIALIZED = 0x01, + DEV_DISCONNECTED = 0x02, + DEV_MISCONFIGURED = 0x04, +}; + +/* io methods */ +enum tm6000_io_method { + IO_NONE, + IO_READ, + IO_MMAP, +}; + +enum tm6000_mode { + TM6000_MODE_UNKNOWN = 0, + TM6000_MODE_ANALOG, + TM6000_MODE_DIGITAL, +}; + +struct tm6000_gpio { + int tuner_reset; + int tuner_on; + int demod_reset; + int demod_on; + int power_led; + int dvb_led; + int ir; +}; + +struct tm6000_capabilities { + unsigned int has_tuner:1; + unsigned int has_tda9874:1; + unsigned int has_dvb:1; + unsigned int has_zl10353:1; + unsigned int has_eeprom:1; + unsigned int has_remote:1; + unsigned int has_radio:1; +}; + +struct tm6000_dvb { + struct dvb_adapter adapter; + struct dvb_demux demux; + struct dvb_frontend *frontend; + struct dmxdev dmxdev; + unsigned int streams; + struct urb *bulk_urb; + struct mutex mutex; +}; + +struct snd_tm6000_card { + struct snd_card *card; + spinlock_t reg_lock; + struct tm6000_core *core; + struct snd_pcm_substream *substream; + + /* temporary data for buffer fill processing */ + unsigned buf_pos; + unsigned period_pos; +}; + +struct tm6000_endpoint { + struct usb_host_endpoint *endp; + __u8 bInterfaceNumber; + __u8 bAlternateSetting; + unsigned maxsize; +}; + +#define TM6000_QUIRK_NO_USB_DELAY (1 << 0) + +struct tm6000_core { + /* generic device properties */ + char name[30]; /* name (including minor) of the device */ + int model; /* index in the device_data struct */ + int devno; /* marks the number of this device */ + enum tm6000_devtype dev_type; /* type of device */ + unsigned char eedata[256]; /* Eeprom data */ + unsigned eedata_size; /* Size of the eeprom info */ + + v4l2_std_id norm; /* Current norm */ + int width, height; /* Selected resolution */ + + enum tm6000_core_state state; + + /* Device Capabilities*/ + struct tm6000_capabilities caps; + + /* Used to load alsa/dvb */ + struct work_struct request_module_wk; + + /* Tuner configuration */ + int tuner_type; /* type of the tuner */ + int tuner_addr; /* tuner address */ + + struct tm6000_gpio gpio; + + char *ir_codes; + + __u8 radio; + + /* Demodulator configuration */ + int demod_addr; /* demodulator address */ + + int audio_bitrate; + /* i2c i/o */ + struct i2c_adapter i2c_adap; + struct i2c_client i2c_client; + + + /* extension */ + struct list_head devlist; + + /* video for linux */ + int users; + + /* various device info */ + struct tm6000_fh *resources; /* Points to fh that is streaming */ + bool is_res_read; + + struct video_device vfd; + struct video_device radio_dev; + struct tm6000_dmaqueue vidq; + struct v4l2_device v4l2_dev; + struct v4l2_ctrl_handler ctrl_handler; + struct v4l2_ctrl_handler radio_ctrl_handler; + + int input; + struct tm6000_input vinput[3]; /* video input */ + struct tm6000_input rinput; /* radio input */ + + int freq; + unsigned int fourcc; + + enum tm6000_mode mode; + + int ctl_mute; /* audio */ + int ctl_volume; + int amode; + + /* DVB-T support */ + struct tm6000_dvb *dvb; + + /* audio support */ + struct snd_tm6000_card *adev; + struct work_struct wq_trigger; /* Trigger to start/stop audio for alsa module */ + atomic_t stream_started; /* stream should be running if true */ + + struct tm6000_IR *ir; + + /* locks */ + struct mutex lock; + struct mutex usb_lock; + + /* usb transfer */ + struct usb_device *udev; /* the usb device */ + + struct tm6000_endpoint bulk_in, bulk_out, isoc_in, isoc_out; + struct tm6000_endpoint int_in, int_out; + + /* scaler!=0 if scaler is active*/ + int scaler; + + /* Isoc control struct */ + struct usb_isoc_ctl isoc_ctl; + + spinlock_t slock; + + /* urb dma buffers */ + char **urb_buffer; + dma_addr_t *urb_dma; + unsigned int urb_size; + + unsigned long quirks; +}; + +enum tm6000_ops_type { + TM6000_AUDIO = 0x10, + TM6000_DVB = 0x20, +}; + +struct tm6000_ops { + struct list_head next; + char *name; + enum tm6000_ops_type type; + int (*init)(struct tm6000_core *); + int (*fini)(struct tm6000_core *); + int (*fillbuf)(struct tm6000_core *, char *buf, int size); +}; + +struct tm6000_fh { + struct v4l2_fh fh; + struct tm6000_core *dev; + unsigned int radio; + + /* video capture */ + struct tm6000_fmt *fmt; + unsigned int width, height; + struct videobuf_queue vb_vidq; + + enum v4l2_buf_type type; +}; + +#define TM6000_STD (V4L2_STD_PAL|V4L2_STD_PAL_N|V4L2_STD_PAL_Nc| \ + V4L2_STD_PAL_M|V4L2_STD_PAL_60|V4L2_STD_NTSC_M| \ + V4L2_STD_NTSC_M_JP|V4L2_STD_SECAM) + +/* In tm6000-cards.c */ + +int tm6000_tuner_callback(void *ptr, int component, int command, int arg); +int tm6000_xc5000_callback(void *ptr, int component, int command, int arg); +int tm6000_cards_setup(struct tm6000_core *dev); +void tm6000_flash_led(struct tm6000_core *dev, u8 state); + +/* In tm6000-core.c */ + +int tm6000_read_write_usb(struct tm6000_core *dev, u8 reqtype, u8 req, + u16 value, u16 index, u8 *buf, u16 len); +int tm6000_get_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index); +int tm6000_get_reg16(struct tm6000_core *dev, u8 req, u16 value, u16 index); +int tm6000_get_reg32(struct tm6000_core *dev, u8 req, u16 value, u16 index); +int tm6000_set_reg(struct tm6000_core *dev, u8 req, u16 value, u16 index); +int tm6000_set_reg_mask(struct tm6000_core *dev, u8 req, u16 value, + u16 index, u16 mask); +int tm6000_i2c_reset(struct tm6000_core *dev, u16 tsleep); +int tm6000_init(struct tm6000_core *dev); +int tm6000_reset(struct tm6000_core *dev); + +int tm6000_init_analog_mode(struct tm6000_core *dev); +int tm6000_init_digital_mode(struct tm6000_core *dev); +int tm6000_set_audio_bitrate(struct tm6000_core *dev, int bitrate); +int tm6000_set_audio_rinput(struct tm6000_core *dev); +int tm6000_tvaudio_set_mute(struct tm6000_core *dev, u8 mute); +void tm6000_set_volume(struct tm6000_core *dev, int vol); + +int tm6000_v4l2_register(struct tm6000_core *dev); +int tm6000_v4l2_unregister(struct tm6000_core *dev); +int tm6000_v4l2_exit(void); +void tm6000_set_fourcc_format(struct tm6000_core *dev); + +void tm6000_remove_from_devlist(struct tm6000_core *dev); +void tm6000_add_into_devlist(struct tm6000_core *dev); +int tm6000_register_extension(struct tm6000_ops *ops); +void tm6000_unregister_extension(struct tm6000_ops *ops); +void tm6000_init_extension(struct tm6000_core *dev); +void tm6000_close_extension(struct tm6000_core *dev); +int tm6000_call_fillbuf(struct tm6000_core *dev, enum tm6000_ops_type type, + char *buf, int size); + + +/* In tm6000-stds.c */ +void tm6000_get_std_res(struct tm6000_core *dev); +int tm6000_set_standard(struct tm6000_core *dev); + +/* In tm6000-i2c.c */ +int tm6000_i2c_register(struct tm6000_core *dev); +int tm6000_i2c_unregister(struct tm6000_core *dev); + +/* In tm6000-queue.c */ + +int tm6000_v4l2_mmap(struct file *filp, struct vm_area_struct *vma); + +int tm6000_vidioc_streamon(struct file *file, void *priv, + enum v4l2_buf_type i); +int tm6000_vidioc_streamoff(struct file *file, void *priv, + enum v4l2_buf_type i); +int tm6000_vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *rb); +int tm6000_vidioc_querybuf(struct file *file, void *priv, + struct v4l2_buffer *b); +int tm6000_vidioc_qbuf(struct file *file, void *priv, struct v4l2_buffer *b); +int tm6000_vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b); +ssize_t tm6000_v4l2_read(struct file *filp, char __user * buf, size_t count, + loff_t *f_pos); +unsigned int tm6000_v4l2_poll(struct file *file, + struct poll_table_struct *wait); +int tm6000_queue_init(struct tm6000_core *dev); + +/* In tm6000-alsa.c */ +/*int tm6000_audio_init(struct tm6000_core *dev, int idx);*/ + +/* In tm6000-input.c */ +int tm6000_ir_init(struct tm6000_core *dev); +int tm6000_ir_fini(struct tm6000_core *dev); +void tm6000_ir_wait(struct tm6000_core *dev, u8 state); +int tm6000_ir_int_start(struct tm6000_core *dev); +void tm6000_ir_int_stop(struct tm6000_core *dev); + +/* Debug stuff */ + +extern int tm6000_debug; + +#define dprintk(dev, level, fmt, arg...) do {\ + if (tm6000_debug & level) \ + printk(KERN_INFO "(%lu) %s %s :"fmt, jiffies, \ + dev->name, __func__ , ##arg); } while (0) + +#define V4L2_DEBUG_REG 0x0004 +#define V4L2_DEBUG_I2C 0x0008 +#define V4L2_DEBUG_QUEUE 0x0010 +#define V4L2_DEBUG_ISOC 0x0020 +#define V4L2_DEBUG_RES_LOCK 0x0040 /* Resource locking */ +#define V4L2_DEBUG_OPEN 0x0080 /* video open/close debug */ + +#define tm6000_err(fmt, arg...) do {\ + printk(KERN_ERR "tm6000 %s :"fmt, \ + __func__ , ##arg); } while (0) |