summaryrefslogtreecommitdiffstats
path: root/drivers/misc/eeprom/at24.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/misc/eeprom/at24.c')
-rw-r--r--drivers/misc/eeprom/at24.c46
1 files changed, 38 insertions, 8 deletions
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 305ffad13..02bea4436 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -585,6 +585,31 @@ static unsigned int at24_get_offset_adj(u8 flags, unsigned int byte_len)
}
}
+static void at24_probe_temp_sensor(struct i2c_client *client)
+{
+ struct at24_data *at24 = i2c_get_clientdata(client);
+ struct i2c_board_info info = { .type = "jc42" };
+ int ret;
+ u8 val;
+
+ /*
+ * Byte 2 has value 11 for DDR3, earlier versions don't
+ * support the thermal sensor present flag
+ */
+ ret = at24_read(at24, 2, &val, 1);
+ if (ret || val != 11)
+ return;
+
+ /* Byte 32, bit 7 is set if temp sensor is present */
+ ret = at24_read(at24, 32, &val, 1);
+ if (ret || !(val & BIT(7)))
+ return;
+
+ info.addr = 0x18 | (client->addr & 7);
+
+ i2c_new_client_device(client->adapter, &info);
+}
+
static int at24_probe(struct i2c_client *client)
{
struct regmap_config regmap_config = { };
@@ -757,14 +782,6 @@ static int at24_probe(struct i2c_client *client)
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
- at24->nvmem = devm_nvmem_register(dev, &nvmem_config);
- if (IS_ERR(at24->nvmem)) {
- pm_runtime_disable(dev);
- if (!pm_runtime_status_suspended(dev))
- regulator_disable(at24->vcc_reg);
- return PTR_ERR(at24->nvmem);
- }
-
/*
* Perform a one-byte test read to verify that the
* chip is functional.
@@ -777,6 +794,19 @@ static int at24_probe(struct i2c_client *client)
return -ENODEV;
}
+ at24->nvmem = devm_nvmem_register(dev, &nvmem_config);
+ if (IS_ERR(at24->nvmem)) {
+ pm_runtime_disable(dev);
+ if (!pm_runtime_status_suspended(dev))
+ regulator_disable(at24->vcc_reg);
+ return dev_err_probe(dev, PTR_ERR(at24->nvmem),
+ "failed to register nvmem\n");
+ }
+
+ /* If this a SPD EEPROM, probe for DDR3 thermal sensor */
+ if (cdata == &at24_data_spd)
+ at24_probe_temp_sensor(client);
+
pm_runtime_idle(dev);
if (writable)