diff options
Diffstat (limited to 'drivers/mmc/host/cb710-mmc.c')
| -rw-r--r-- | drivers/mmc/host/cb710-mmc.c | 787 |
1 files changed, 787 insertions, 0 deletions
diff --git a/drivers/mmc/host/cb710-mmc.c b/drivers/mmc/host/cb710-mmc.c new file mode 100644 index 000000000..e84ed84ea --- /dev/null +++ b/drivers/mmc/host/cb710-mmc.c @@ -0,0 +1,787 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * cb710/mmc.c + * + * Copyright by Michał Mirosław, 2008-2009 + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include "cb710-mmc.h" + +#define CB710_MMC_REQ_TIMEOUT_MS 2000 + +static const u8 cb710_clock_divider_log2[8] = { +/* 1, 2, 4, 8, 16, 32, 128, 512 */ + 0, 1, 2, 3, 4, 5, 7, 9 +}; +#define CB710_MAX_DIVIDER_IDX \ + (ARRAY_SIZE(cb710_clock_divider_log2) - 1) + +static const u8 cb710_src_freq_mhz[16] = { + 33, 10, 20, 25, 30, 35, 40, 45, + 50, 55, 60, 65, 70, 75, 80, 85 +}; + +static void cb710_mmc_select_clock_divider(struct mmc_host *mmc, int hz) +{ + struct cb710_slot *slot = cb710_mmc_to_slot(mmc); + struct pci_dev *pdev = cb710_slot_to_chip(slot)->pdev; + u32 src_freq_idx; + u32 divider_idx; + int src_hz; + + /* on CB710 in HP nx9500: + * src_freq_idx == 0 + * indexes 1-7 work as written in the table + * indexes 0,8-15 give no clock output + */ + pci_read_config_dword(pdev, 0x48, &src_freq_idx); + src_freq_idx = (src_freq_idx >> 16) & 0xF; + src_hz = cb710_src_freq_mhz[src_freq_idx] * 1000000; + + for (divider_idx = 0; divider_idx < CB710_MAX_DIVIDER_IDX; ++divider_idx) { + if (hz >= src_hz >> cb710_clock_divider_log2[divider_idx]) + break; + } + + if (src_freq_idx) + divider_idx |= 0x8; + else if (divider_idx == 0) + divider_idx = 1; + + cb710_pci_update_config_reg(pdev, 0x40, ~0xF0000000, divider_idx << 28); + + dev_dbg(cb710_slot_dev(slot), + "clock set to %d Hz, wanted %d Hz; src_freq_idx = %d, divider_idx = %d|%d\n", + src_hz >> cb710_clock_divider_log2[divider_idx & 7], + hz, src_freq_idx, divider_idx & 7, divider_idx & 8); +} + +static void __cb710_mmc_enable_irq(struct cb710_slot *slot, + unsigned short enable, unsigned short mask) +{ + /* clear global IE + * - it gets set later if any interrupt sources are enabled */ + mask |= CB710_MMC_IE_IRQ_ENABLE; + + /* look like interrupt is fired whenever + * WORD[0x0C] & WORD[0x10] != 0; + * -> bit 15 port 0x0C seems to be global interrupt enable + */ + + enable = (cb710_read_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT) + & ~mask) | enable; + + if (enable) + enable |= CB710_MMC_IE_IRQ_ENABLE; + + cb710_write_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT, enable); +} + +static void cb710_mmc_enable_irq(struct cb710_slot *slot, + unsigned short enable, unsigned short mask) +{ + struct cb710_mmc_reader *reader = mmc_priv(cb710_slot_to_mmc(slot)); + unsigned long flags; + + spin_lock_irqsave(&reader->irq_lock, flags); + /* this is the only thing irq_lock protects */ + __cb710_mmc_enable_irq(slot, enable, mask); + spin_unlock_irqrestore(&reader->irq_lock, flags); +} + +static void cb710_mmc_reset_events(struct cb710_slot *slot) +{ + cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, 0xFF); + cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, 0xFF); + cb710_write_port_8(slot, CB710_MMC_STATUS2_PORT, 0xFF); +} + +static void cb710_mmc_enable_4bit_data(struct cb710_slot *slot, int enable) +{ + if (enable) + cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, + CB710_MMC_C1_4BIT_DATA_BUS, 0); + else + cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, + 0, CB710_MMC_C1_4BIT_DATA_BUS); +} + +static int cb710_check_event(struct cb710_slot *slot, u8 what) +{ + u16 status; + + status = cb710_read_port_16(slot, CB710_MMC_STATUS_PORT); + + if (status & CB710_MMC_S0_FIFO_UNDERFLOW) { + /* it is just a guess, so log it */ + dev_dbg(cb710_slot_dev(slot), + "CHECK : ignoring bit 6 in status %04X\n", status); + cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, + CB710_MMC_S0_FIFO_UNDERFLOW); + status &= ~CB710_MMC_S0_FIFO_UNDERFLOW; + } + + if (status & CB710_MMC_STATUS_ERROR_EVENTS) { + dev_dbg(cb710_slot_dev(slot), + "CHECK : returning EIO on status %04X\n", status); + cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, status & 0xFF); + cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, + CB710_MMC_S1_RESET); + return -EIO; + } + + /* 'what' is a bit in MMC_STATUS1 */ + if ((status >> 8) & what) { + cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, what); + return 1; + } + + return 0; +} + +static int cb710_wait_for_event(struct cb710_slot *slot, u8 what) +{ + int err = 0; + unsigned limit = 2000000; /* FIXME: real timeout */ + +#ifdef CONFIG_CB710_DEBUG + u32 e, x; + e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT); +#endif + + while (!(err = cb710_check_event(slot, what))) { + if (!--limit) { + cb710_dump_regs(cb710_slot_to_chip(slot), + CB710_DUMP_REGS_MMC); + err = -ETIMEDOUT; + break; + } + udelay(1); + } + +#ifdef CONFIG_CB710_DEBUG + x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT); + + limit = 2000000 - limit; + if (limit > 100) + dev_dbg(cb710_slot_dev(slot), + "WAIT10: waited %d loops, what %d, entry val %08X, exit val %08X\n", + limit, what, e, x); +#endif + return err < 0 ? err : 0; +} + + +static int cb710_wait_while_busy(struct cb710_slot *slot, uint8_t mask) +{ + unsigned limit = 500000; /* FIXME: real timeout */ + int err = 0; + +#ifdef CONFIG_CB710_DEBUG + u32 e, x; + e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT); +#endif + + while (cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & mask) { + if (!--limit) { + cb710_dump_regs(cb710_slot_to_chip(slot), + CB710_DUMP_REGS_MMC); + err = -ETIMEDOUT; + break; + } + udelay(1); + } + +#ifdef CONFIG_CB710_DEBUG + x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT); + + limit = 500000 - limit; + if (limit > 100) + dev_dbg(cb710_slot_dev(slot), + "WAIT12: waited %d loops, mask %02X, entry val %08X, exit val %08X\n", + limit, mask, e, x); +#endif + return err; +} + +static void cb710_mmc_set_transfer_size(struct cb710_slot *slot, + size_t count, size_t blocksize) +{ + cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); + cb710_write_port_32(slot, CB710_MMC_TRANSFER_SIZE_PORT, + ((count - 1) << 16)|(blocksize - 1)); + + dev_vdbg(cb710_slot_dev(slot), "set up for %zu block%s of %zu bytes\n", + count, count == 1 ? "" : "s", blocksize); +} + +static void cb710_mmc_fifo_hack(struct cb710_slot *slot) +{ + /* without this, received data is prepended with 8-bytes of zeroes */ + u32 r1, r2; + int ok = 0; + + r1 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT); + r2 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT); + if (cb710_read_port_8(slot, CB710_MMC_STATUS0_PORT) + & CB710_MMC_S0_FIFO_UNDERFLOW) { + cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, + CB710_MMC_S0_FIFO_UNDERFLOW); + ok = 1; + } + + dev_dbg(cb710_slot_dev(slot), + "FIFO-read-hack: expected STATUS0 bit was %s\n", + ok ? "set." : "NOT SET!"); + dev_dbg(cb710_slot_dev(slot), + "FIFO-read-hack: dwords ignored: %08X %08X - %s\n", + r1, r2, (r1|r2) ? "BAD (NOT ZERO)!" : "ok"); +} + +static int cb710_mmc_receive_pio(struct cb710_slot *slot, + struct sg_mapping_iter *miter, size_t dw_count) +{ + if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & CB710_MMC_S2_FIFO_READY)) { + int err = cb710_wait_for_event(slot, + CB710_MMC_S1_PIO_TRANSFER_DONE); + if (err) + return err; + } + + cb710_sg_dwiter_write_from_io(miter, + slot->iobase + CB710_MMC_DATA_PORT, dw_count); + + return 0; +} + +static bool cb710_is_transfer_size_supported(struct mmc_data *data) +{ + return !(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8)); +} + +static int cb710_mmc_receive(struct cb710_slot *slot, struct mmc_data *data) +{ + struct sg_mapping_iter miter; + size_t len, blocks = data->blocks; + int err = 0; + + /* TODO: I don't know how/if the hardware handles non-16B-boundary blocks + * except single 8B block */ + if (unlikely(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8))) + return -EINVAL; + + sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_TO_SG); + + cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, + 15, CB710_MMC_C2_READ_PIO_SIZE_MASK); + + cb710_mmc_fifo_hack(slot); + + while (blocks-- > 0) { + len = data->blksz; + + while (len >= 16) { + err = cb710_mmc_receive_pio(slot, &miter, 4); + if (err) + goto out; + len -= 16; + } + + if (!len) + continue; + + cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, + len - 1, CB710_MMC_C2_READ_PIO_SIZE_MASK); + + len = (len >= 8) ? 4 : 2; + err = cb710_mmc_receive_pio(slot, &miter, len); + if (err) + goto out; + } +out: + sg_miter_stop(&miter); + return err; +} + +static int cb710_mmc_send(struct cb710_slot *slot, struct mmc_data *data) +{ + struct sg_mapping_iter miter; + size_t len, blocks = data->blocks; + int err = 0; + + /* TODO: I don't know how/if the hardware handles multiple + * non-16B-boundary blocks */ + if (unlikely(data->blocks > 1 && data->blksz & 15)) + return -EINVAL; + + sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_FROM_SG); + + cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, + 0, CB710_MMC_C2_READ_PIO_SIZE_MASK); + + while (blocks-- > 0) { + len = (data->blksz + 15) >> 4; + do { + if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) + & CB710_MMC_S2_FIFO_EMPTY)) { + err = cb710_wait_for_event(slot, + CB710_MMC_S1_PIO_TRANSFER_DONE); + if (err) + goto out; + } + cb710_sg_dwiter_read_to_io(&miter, + slot->iobase + CB710_MMC_DATA_PORT, 4); + } while (--len); + } +out: + sg_miter_stop(&miter); + return err; +} + +static u16 cb710_encode_cmd_flags(struct cb710_mmc_reader *reader, + struct mmc_command *cmd) +{ + unsigned int flags = cmd->flags; + u16 cb_flags = 0; + + /* Windows driver returned 0 for commands for which no response + * is expected. It happened that there were only two such commands + * used: MMC_GO_IDLE_STATE and MMC_GO_INACTIVE_STATE so it might + * as well be a bug in that driver. + * + * Original driver set bit 14 for MMC/SD application + * commands. There's no difference 'on the wire' and + * it apparently works without it anyway. + */ + + switch (flags & MMC_CMD_MASK) { + case MMC_CMD_AC: cb_flags = CB710_MMC_CMD_AC; break; + case MMC_CMD_ADTC: cb_flags = CB710_MMC_CMD_ADTC; break; + case MMC_CMD_BC: cb_flags = CB710_MMC_CMD_BC; break; + case MMC_CMD_BCR: cb_flags = CB710_MMC_CMD_BCR; break; + } + + if (flags & MMC_RSP_BUSY) + cb_flags |= CB710_MMC_RSP_BUSY; + + cb_flags |= cmd->opcode << CB710_MMC_CMD_CODE_SHIFT; + + if (cmd->data && (cmd->data->flags & MMC_DATA_READ)) + cb_flags |= CB710_MMC_DATA_READ; + + if (flags & MMC_RSP_PRESENT) { + /* Windows driver set 01 at bits 4,3 except for + * MMC_SET_BLOCKLEN where it set 10. Maybe the + * hardware can do something special about this + * command? The original driver looks buggy/incomplete + * anyway so we ignore this for now. + * + * I assume that 00 here means no response is expected. + */ + cb_flags |= CB710_MMC_RSP_PRESENT; + + if (flags & MMC_RSP_136) + cb_flags |= CB710_MMC_RSP_136; + if (!(flags & MMC_RSP_CRC)) + cb_flags |= CB710_MMC_RSP_NO_CRC; + } + + return cb_flags; +} + +static void cb710_receive_response(struct cb710_slot *slot, + struct mmc_command *cmd) +{ + unsigned rsp_opcode, wanted_opcode; + + /* Looks like final byte with CRC is always stripped (same as SDHCI) */ + if (cmd->flags & MMC_RSP_136) { + u32 resp[4]; + + resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE3_PORT); + resp[1] = cb710_read_port_32(slot, CB710_MMC_RESPONSE2_PORT); + resp[2] = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT); + resp[3] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT); + rsp_opcode = resp[0] >> 24; + + cmd->resp[0] = (resp[0] << 8)|(resp[1] >> 24); + cmd->resp[1] = (resp[1] << 8)|(resp[2] >> 24); + cmd->resp[2] = (resp[2] << 8)|(resp[3] >> 24); + cmd->resp[3] = (resp[3] << 8); + } else { + rsp_opcode = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT) & 0x3F; + cmd->resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT); + } + + wanted_opcode = (cmd->flags & MMC_RSP_OPCODE) ? cmd->opcode : 0x3F; + if (rsp_opcode != wanted_opcode) + cmd->error = -EILSEQ; +} + +static int cb710_mmc_transfer_data(struct cb710_slot *slot, + struct mmc_data *data) +{ + int error, to; + + if (data->flags & MMC_DATA_READ) + error = cb710_mmc_receive(slot, data); + else + error = cb710_mmc_send(slot, data); + + to = cb710_wait_for_event(slot, CB710_MMC_S1_DATA_TRANSFER_DONE); + if (!error) + error = to; + + if (!error) + data->bytes_xfered = data->blksz * data->blocks; + return error; +} + +static int cb710_mmc_command(struct mmc_host *mmc, struct mmc_command *cmd) +{ + struct cb710_slot *slot = cb710_mmc_to_slot(mmc); + struct cb710_mmc_reader *reader = mmc_priv(mmc); + struct mmc_data *data = cmd->data; + + u16 cb_cmd = cb710_encode_cmd_flags(reader, cmd); + dev_dbg(cb710_slot_dev(slot), "cmd request: 0x%04X\n", cb_cmd); + + if (data) { + if (!cb710_is_transfer_size_supported(data)) { + data->error = -EINVAL; + return -1; + } + cb710_mmc_set_transfer_size(slot, data->blocks, data->blksz); + } + + cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20|CB710_MMC_S2_BUSY_10); + cb710_write_port_16(slot, CB710_MMC_CMD_TYPE_PORT, cb_cmd); + cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); + cb710_write_port_32(slot, CB710_MMC_CMD_PARAM_PORT, cmd->arg); + cb710_mmc_reset_events(slot); + cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); + cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x01, 0); + + cmd->error = cb710_wait_for_event(slot, CB710_MMC_S1_COMMAND_SENT); + if (cmd->error) + return -1; + + if (cmd->flags & MMC_RSP_PRESENT) { + cb710_receive_response(slot, cmd); + if (cmd->error) + return -1; + } + + if (data) + data->error = cb710_mmc_transfer_data(slot, data); + return 0; +} + +static void cb710_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) +{ + struct cb710_slot *slot = cb710_mmc_to_slot(mmc); + struct cb710_mmc_reader *reader = mmc_priv(mmc); + + WARN_ON(reader->mrq != NULL); + + reader->mrq = mrq; + cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0); + + if (!cb710_mmc_command(mmc, mrq->cmd) && mrq->stop) + cb710_mmc_command(mmc, mrq->stop); + + tasklet_schedule(&reader->finish_req_tasklet); +} + +static int cb710_mmc_powerup(struct cb710_slot *slot) +{ +#ifdef CONFIG_CB710_DEBUG + struct cb710_chip *chip = cb710_slot_to_chip(slot); +#endif + int err; + + /* a lot of magic for now */ + dev_dbg(cb710_slot_dev(slot), "bus powerup\n"); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); + if (unlikely(err)) + return err; + cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x80, 0); + cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x80, 0); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + mdelay(1); + dev_dbg(cb710_slot_dev(slot), "after delay 1\n"); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); + if (unlikely(err)) + return err; + cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x09, 0); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + mdelay(1); + dev_dbg(cb710_slot_dev(slot), "after delay 2\n"); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); + if (unlikely(err)) + return err; + cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x08); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + mdelay(2); + dev_dbg(cb710_slot_dev(slot), "after delay 3\n"); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0); + cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x70, 0); + cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, 0x80, 0); + cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x03, 0); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); + if (unlikely(err)) + return err; + /* This port behaves weird: quick byte reads of 0x08,0x09 return + * 0xFF,0x00 after writing 0xFFFF to 0x08; it works correctly when + * read/written from userspace... What am I missing here? + * (it doesn't depend on write-to-read delay) */ + cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0xFFFF); + cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + dev_dbg(cb710_slot_dev(slot), "bus powerup finished\n"); + + return cb710_check_event(slot, 0); +} + +static void cb710_mmc_powerdown(struct cb710_slot *slot) +{ + cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x81); + cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0, 0x80); +} + +static void cb710_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct cb710_slot *slot = cb710_mmc_to_slot(mmc); + struct cb710_mmc_reader *reader = mmc_priv(mmc); + int err; + + cb710_mmc_select_clock_divider(mmc, ios->clock); + + if (ios->power_mode != reader->last_power_mode) { + switch (ios->power_mode) { + case MMC_POWER_ON: + err = cb710_mmc_powerup(slot); + if (err) { + dev_warn(cb710_slot_dev(slot), + "powerup failed (%d)- retrying\n", err); + cb710_mmc_powerdown(slot); + udelay(1); + err = cb710_mmc_powerup(slot); + if (err) + dev_warn(cb710_slot_dev(slot), + "powerup retry failed (%d) - expect errors\n", + err); + } + reader->last_power_mode = MMC_POWER_ON; + break; + case MMC_POWER_OFF: + cb710_mmc_powerdown(slot); + reader->last_power_mode = MMC_POWER_OFF; + break; + case MMC_POWER_UP: + default: + /* ignore */ + break; + } + } + + cb710_mmc_enable_4bit_data(slot, ios->bus_width != MMC_BUS_WIDTH_1); + + cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0); +} + +static int cb710_mmc_get_ro(struct mmc_host *mmc) +{ + struct cb710_slot *slot = cb710_mmc_to_slot(mmc); + + return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT) + & CB710_MMC_S3_WRITE_PROTECTED; +} + +static int cb710_mmc_get_cd(struct mmc_host *mmc) +{ + struct cb710_slot *slot = cb710_mmc_to_slot(mmc); + + return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT) + & CB710_MMC_S3_CARD_DETECTED; +} + +static int cb710_mmc_irq_handler(struct cb710_slot *slot) +{ + struct mmc_host *mmc = cb710_slot_to_mmc(slot); + struct cb710_mmc_reader *reader = mmc_priv(mmc); + u32 status, config1, config2, irqen; + + status = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT); + irqen = cb710_read_port_32(slot, CB710_MMC_IRQ_ENABLE_PORT); + config2 = cb710_read_port_32(slot, CB710_MMC_CONFIGB_PORT); + config1 = cb710_read_port_32(slot, CB710_MMC_CONFIG_PORT); + + dev_dbg(cb710_slot_dev(slot), "interrupt; status: %08X, " + "ie: %08X, c2: %08X, c1: %08X\n", + status, irqen, config2, config1); + + if (status & (CB710_MMC_S1_CARD_CHANGED << 8)) { + /* ack the event */ + cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, + CB710_MMC_S1_CARD_CHANGED); + if ((irqen & CB710_MMC_IE_CISTATUS_MASK) + == CB710_MMC_IE_CISTATUS_MASK) + mmc_detect_change(mmc, HZ/5); + } else { + dev_dbg(cb710_slot_dev(slot), "unknown interrupt (test)\n"); + spin_lock(&reader->irq_lock); + __cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_TEST_MASK); + spin_unlock(&reader->irq_lock); + } + + return 1; +} + +static void cb710_mmc_finish_request_tasklet(unsigned long data) +{ + struct mmc_host *mmc = (void *)data; + struct cb710_mmc_reader *reader = mmc_priv(mmc); + struct mmc_request *mrq = reader->mrq; + + reader->mrq = NULL; + mmc_request_done(mmc, mrq); +} + +static const struct mmc_host_ops cb710_mmc_host = { + .request = cb710_mmc_request, + .set_ios = cb710_mmc_set_ios, + .get_ro = cb710_mmc_get_ro, + .get_cd = cb710_mmc_get_cd, +}; + +#ifdef CONFIG_PM + +static int cb710_mmc_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct cb710_slot *slot = cb710_pdev_to_slot(pdev); + + cb710_mmc_enable_irq(slot, 0, ~0); + return 0; +} + +static int cb710_mmc_resume(struct platform_device *pdev) +{ + struct cb710_slot *slot = cb710_pdev_to_slot(pdev); + + cb710_mmc_enable_irq(slot, 0, ~0); + return 0; +} + +#endif /* CONFIG_PM */ + +static int cb710_mmc_init(struct platform_device *pdev) +{ + struct cb710_slot *slot = cb710_pdev_to_slot(pdev); + struct cb710_chip *chip = cb710_slot_to_chip(slot); + struct mmc_host *mmc; + struct cb710_mmc_reader *reader; + int err; + u32 val; + + mmc = mmc_alloc_host(sizeof(*reader), cb710_slot_dev(slot)); + if (!mmc) + return -ENOMEM; + + platform_set_drvdata(pdev, mmc); + + /* harmless (maybe) magic */ + pci_read_config_dword(chip->pdev, 0x48, &val); + val = cb710_src_freq_mhz[(val >> 16) & 0xF]; + dev_dbg(cb710_slot_dev(slot), "source frequency: %dMHz\n", val); + val *= 1000000; + + mmc->ops = &cb710_mmc_host; + mmc->f_max = val; + mmc->f_min = val >> cb710_clock_divider_log2[CB710_MAX_DIVIDER_IDX]; + mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34; + mmc->caps = MMC_CAP_4_BIT_DATA; + /* + * In cb710_wait_for_event() we use a fixed timeout of ~2s, hence let's + * inform the core about it. A future improvement should instead make + * use of the cmd->busy_timeout. + */ + mmc->max_busy_timeout = CB710_MMC_REQ_TIMEOUT_MS; + + reader = mmc_priv(mmc); + + tasklet_init(&reader->finish_req_tasklet, + cb710_mmc_finish_request_tasklet, (unsigned long)mmc); + spin_lock_init(&reader->irq_lock); + cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); + + cb710_mmc_enable_irq(slot, 0, ~0); + cb710_set_irq_handler(slot, cb710_mmc_irq_handler); + + err = mmc_add_host(mmc); + if (unlikely(err)) + goto err_free_mmc; + + dev_dbg(cb710_slot_dev(slot), "mmc_hostname is %s\n", + mmc_hostname(mmc)); + + cb710_mmc_enable_irq(slot, CB710_MMC_IE_CARD_INSERTION_STATUS, 0); + + return 0; + +err_free_mmc: + dev_dbg(cb710_slot_dev(slot), "mmc_add_host() failed: %d\n", err); + + cb710_set_irq_handler(slot, NULL); + mmc_free_host(mmc); + return err; +} + +static int cb710_mmc_exit(struct platform_device *pdev) +{ + struct cb710_slot *slot = cb710_pdev_to_slot(pdev); + struct mmc_host *mmc = cb710_slot_to_mmc(slot); + struct cb710_mmc_reader *reader = mmc_priv(mmc); + + cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_CARD_INSERTION_STATUS); + + mmc_remove_host(mmc); + + /* IRQs should be disabled now, but let's stay on the safe side */ + cb710_mmc_enable_irq(slot, 0, ~0); + cb710_set_irq_handler(slot, NULL); + + /* clear config ports - just in case */ + cb710_write_port_32(slot, CB710_MMC_CONFIG_PORT, 0); + cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0); + + tasklet_kill(&reader->finish_req_tasklet); + + mmc_free_host(mmc); + return 0; +} + +static struct platform_driver cb710_mmc_driver = { + .driver.name = "cb710-mmc", + .probe = cb710_mmc_init, + .remove = cb710_mmc_exit, +#ifdef CONFIG_PM + .suspend = cb710_mmc_suspend, + .resume = cb710_mmc_resume, +#endif +}; + +module_platform_driver(cb710_mmc_driver); + +MODULE_AUTHOR("Michał Mirosław <mirq-linux@rere.qmqm.pl>"); +MODULE_DESCRIPTION("ENE CB710 memory card reader driver - MMC/SD part"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:cb710-mmc"); |