diff options
Diffstat (limited to 'drivers/mmc/host/sdhci-pci-gli.c')
| -rw-r--r-- | drivers/mmc/host/sdhci-pci-gli.c | 865 |
1 files changed, 865 insertions, 0 deletions
diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c new file mode 100644 index 000000000..23b89b4ca --- /dev/null +++ b/drivers/mmc/host/sdhci-pci-gli.c @@ -0,0 +1,865 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Genesys Logic, Inc. + * + * Authors: Ben Chuang <ben.chuang@genesyslogic.com.tw> + * + * Version: v0.9.0 (2019-08-08) + */ + +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/pci.h> +#include <linux/mmc/mmc.h> +#include <linux/delay.h> +#include "sdhci.h" +#include "sdhci-pci.h" +#include "cqhci.h" + +/* Genesys Logic extra registers */ +#define SDHCI_GLI_9750_WT 0x800 +#define SDHCI_GLI_9750_WT_EN BIT(0) +#define GLI_9750_WT_EN_ON 0x1 +#define GLI_9750_WT_EN_OFF 0x0 + +#define SDHCI_GLI_9750_DRIVING 0x860 +#define SDHCI_GLI_9750_DRIVING_1 GENMASK(11, 0) +#define SDHCI_GLI_9750_DRIVING_2 GENMASK(27, 26) +#define GLI_9750_DRIVING_1_VALUE 0xFFF +#define GLI_9750_DRIVING_2_VALUE 0x3 +#define SDHCI_GLI_9750_SEL_1 BIT(29) +#define SDHCI_GLI_9750_SEL_2 BIT(31) +#define SDHCI_GLI_9750_ALL_RST (BIT(24)|BIT(25)|BIT(28)|BIT(30)) + +#define SDHCI_GLI_9750_PLL 0x864 +#define SDHCI_GLI_9750_PLL_LDIV GENMASK(9, 0) +#define SDHCI_GLI_9750_PLL_PDIV GENMASK(14, 12) +#define SDHCI_GLI_9750_PLL_DIR BIT(15) +#define SDHCI_GLI_9750_PLL_TX2_INV BIT(23) +#define SDHCI_GLI_9750_PLL_TX2_DLY GENMASK(22, 20) +#define GLI_9750_PLL_TX2_INV_VALUE 0x1 +#define GLI_9750_PLL_TX2_DLY_VALUE 0x0 +#define SDHCI_GLI_9750_PLLSSC_STEP GENMASK(28, 24) +#define SDHCI_GLI_9750_PLLSSC_EN BIT(31) + +#define SDHCI_GLI_9750_PLLSSC 0x86C +#define SDHCI_GLI_9750_PLLSSC_PPM GENMASK(31, 16) + +#define SDHCI_GLI_9750_SW_CTRL 0x874 +#define SDHCI_GLI_9750_SW_CTRL_4 GENMASK(7, 6) +#define GLI_9750_SW_CTRL_4_VALUE 0x3 + +#define SDHCI_GLI_9750_MISC 0x878 +#define SDHCI_GLI_9750_MISC_TX1_INV BIT(2) +#define SDHCI_GLI_9750_MISC_RX_INV BIT(3) +#define SDHCI_GLI_9750_MISC_TX1_DLY GENMASK(6, 4) +#define GLI_9750_MISC_TX1_INV_VALUE 0x0 +#define GLI_9750_MISC_RX_INV_ON 0x1 +#define GLI_9750_MISC_RX_INV_OFF 0x0 +#define GLI_9750_MISC_RX_INV_VALUE GLI_9750_MISC_RX_INV_OFF +#define GLI_9750_MISC_TX1_DLY_VALUE 0x5 + +#define SDHCI_GLI_9750_TUNING_CONTROL 0x540 +#define SDHCI_GLI_9750_TUNING_CONTROL_EN BIT(4) +#define GLI_9750_TUNING_CONTROL_EN_ON 0x1 +#define GLI_9750_TUNING_CONTROL_EN_OFF 0x0 +#define SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1 BIT(16) +#define SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2 GENMASK(20, 19) +#define GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE 0x1 +#define GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE 0x2 + +#define SDHCI_GLI_9750_TUNING_PARAMETERS 0x544 +#define SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY GENMASK(2, 0) +#define GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE 0x1 + +#define SDHCI_GLI_9763E_CTRL_HS400 0x7 + +#define SDHCI_GLI_9763E_HS400_ES_REG 0x52C +#define SDHCI_GLI_9763E_HS400_ES_BIT BIT(8) + +#define PCIE_GLI_9763E_VHS 0x884 +#define GLI_9763E_VHS_REV GENMASK(19, 16) +#define GLI_9763E_VHS_REV_R 0x0 +#define GLI_9763E_VHS_REV_M 0x1 +#define GLI_9763E_VHS_REV_W 0x2 +#define PCIE_GLI_9763E_MB 0x888 +#define GLI_9763E_MB_CMDQ_OFF BIT(19) +#define PCIE_GLI_9763E_SCR 0x8E0 +#define GLI_9763E_SCR_AXI_REQ BIT(9) + +#define SDHCI_GLI_9763E_CQE_BASE_ADDR 0x200 +#define GLI_9763E_CQE_TRNS_MODE (SDHCI_TRNS_MULTI | \ + SDHCI_TRNS_BLK_CNT_EN | \ + SDHCI_TRNS_DMA) + +#define PCI_GLI_9755_WT 0x800 +#define PCI_GLI_9755_WT_EN BIT(0) +#define GLI_9755_WT_EN_ON 0x1 +#define GLI_9755_WT_EN_OFF 0x0 + +#define PCI_GLI_9755_PLL 0x64 +#define PCI_GLI_9755_PLL_LDIV GENMASK(9, 0) +#define PCI_GLI_9755_PLL_PDIV GENMASK(14, 12) +#define PCI_GLI_9755_PLL_DIR BIT(15) +#define PCI_GLI_9755_PLLSSC_STEP GENMASK(28, 24) +#define PCI_GLI_9755_PLLSSC_EN BIT(31) + +#define PCI_GLI_9755_PLLSSC 0x68 +#define PCI_GLI_9755_PLLSSC_PPM GENMASK(15, 0) + +#define GLI_MAX_TUNING_LOOP 40 + +/* Genesys Logic chipset */ +static inline void gl9750_wt_on(struct sdhci_host *host) +{ + u32 wt_value; + u32 wt_enable; + + wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT); + wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value); + + if (wt_enable == GLI_9750_WT_EN_ON) + return; + + wt_value &= ~SDHCI_GLI_9750_WT_EN; + wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_ON); + + sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT); +} + +static inline void gl9750_wt_off(struct sdhci_host *host) +{ + u32 wt_value; + u32 wt_enable; + + wt_value = sdhci_readl(host, SDHCI_GLI_9750_WT); + wt_enable = FIELD_GET(SDHCI_GLI_9750_WT_EN, wt_value); + + if (wt_enable == GLI_9750_WT_EN_OFF) + return; + + wt_value &= ~SDHCI_GLI_9750_WT_EN; + wt_value |= FIELD_PREP(SDHCI_GLI_9750_WT_EN, GLI_9750_WT_EN_OFF); + + sdhci_writel(host, wt_value, SDHCI_GLI_9750_WT); +} + +static void gli_set_9750(struct sdhci_host *host) +{ + u32 driving_value; + u32 pll_value; + u32 sw_ctrl_value; + u32 misc_value; + u32 parameter_value; + u32 control_value; + u16 ctrl2; + + gl9750_wt_on(host); + + driving_value = sdhci_readl(host, SDHCI_GLI_9750_DRIVING); + pll_value = sdhci_readl(host, SDHCI_GLI_9750_PLL); + sw_ctrl_value = sdhci_readl(host, SDHCI_GLI_9750_SW_CTRL); + misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC); + parameter_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_PARAMETERS); + control_value = sdhci_readl(host, SDHCI_GLI_9750_TUNING_CONTROL); + + driving_value &= ~(SDHCI_GLI_9750_DRIVING_1); + driving_value &= ~(SDHCI_GLI_9750_DRIVING_2); + driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_1, + GLI_9750_DRIVING_1_VALUE); + driving_value |= FIELD_PREP(SDHCI_GLI_9750_DRIVING_2, + GLI_9750_DRIVING_2_VALUE); + driving_value &= ~(SDHCI_GLI_9750_SEL_1|SDHCI_GLI_9750_SEL_2|SDHCI_GLI_9750_ALL_RST); + driving_value |= SDHCI_GLI_9750_SEL_2; + sdhci_writel(host, driving_value, SDHCI_GLI_9750_DRIVING); + + sw_ctrl_value &= ~SDHCI_GLI_9750_SW_CTRL_4; + sw_ctrl_value |= FIELD_PREP(SDHCI_GLI_9750_SW_CTRL_4, + GLI_9750_SW_CTRL_4_VALUE); + sdhci_writel(host, sw_ctrl_value, SDHCI_GLI_9750_SW_CTRL); + + /* reset the tuning flow after reinit and before starting tuning */ + pll_value &= ~SDHCI_GLI_9750_PLL_TX2_INV; + pll_value &= ~SDHCI_GLI_9750_PLL_TX2_DLY; + pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_INV, + GLI_9750_PLL_TX2_INV_VALUE); + pll_value |= FIELD_PREP(SDHCI_GLI_9750_PLL_TX2_DLY, + GLI_9750_PLL_TX2_DLY_VALUE); + + misc_value &= ~SDHCI_GLI_9750_MISC_TX1_INV; + misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV; + misc_value &= ~SDHCI_GLI_9750_MISC_TX1_DLY; + misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_INV, + GLI_9750_MISC_TX1_INV_VALUE); + misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV, + GLI_9750_MISC_RX_INV_VALUE); + misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_TX1_DLY, + GLI_9750_MISC_TX1_DLY_VALUE); + + parameter_value &= ~SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY; + parameter_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_PARAMETERS_RX_DLY, + GLI_9750_TUNING_PARAMETERS_RX_DLY_VALUE); + + control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1; + control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2; + control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_1, + GLI_9750_TUNING_CONTROL_GLITCH_1_VALUE); + control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_GLITCH_2, + GLI_9750_TUNING_CONTROL_GLITCH_2_VALUE); + + sdhci_writel(host, pll_value, SDHCI_GLI_9750_PLL); + sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC); + + /* disable tuned clk */ + ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + ctrl2 &= ~SDHCI_CTRL_TUNED_CLK; + sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2); + + /* enable tuning parameters control */ + control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN; + control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN, + GLI_9750_TUNING_CONTROL_EN_ON); + sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL); + + /* write tuning parameters */ + sdhci_writel(host, parameter_value, SDHCI_GLI_9750_TUNING_PARAMETERS); + + /* disable tuning parameters control */ + control_value &= ~SDHCI_GLI_9750_TUNING_CONTROL_EN; + control_value |= FIELD_PREP(SDHCI_GLI_9750_TUNING_CONTROL_EN, + GLI_9750_TUNING_CONTROL_EN_OFF); + sdhci_writel(host, control_value, SDHCI_GLI_9750_TUNING_CONTROL); + + /* clear tuned clk */ + ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + ctrl2 &= ~SDHCI_CTRL_TUNED_CLK; + sdhci_writew(host, ctrl2, SDHCI_HOST_CONTROL2); + + gl9750_wt_off(host); +} + +static void gli_set_9750_rx_inv(struct sdhci_host *host, bool b) +{ + u32 misc_value; + + gl9750_wt_on(host); + + misc_value = sdhci_readl(host, SDHCI_GLI_9750_MISC); + misc_value &= ~SDHCI_GLI_9750_MISC_RX_INV; + if (b) { + misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV, + GLI_9750_MISC_RX_INV_ON); + } else { + misc_value |= FIELD_PREP(SDHCI_GLI_9750_MISC_RX_INV, + GLI_9750_MISC_RX_INV_OFF); + } + sdhci_writel(host, misc_value, SDHCI_GLI_9750_MISC); + + gl9750_wt_off(host); +} + +static int __sdhci_execute_tuning_9750(struct sdhci_host *host, u32 opcode) +{ + int i; + int rx_inv; + + for (rx_inv = 0; rx_inv < 2; rx_inv++) { + gli_set_9750_rx_inv(host, !!rx_inv); + sdhci_start_tuning(host); + + for (i = 0; i < GLI_MAX_TUNING_LOOP; i++) { + u16 ctrl; + + sdhci_send_tuning(host, opcode); + + if (!host->tuning_done) { + sdhci_abort_tuning(host, opcode); + break; + } + + ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) { + if (ctrl & SDHCI_CTRL_TUNED_CLK) + return 0; /* Success! */ + break; + } + } + } + if (!host->tuning_done) { + pr_info("%s: Tuning timeout, falling back to fixed sampling clock\n", + mmc_hostname(host->mmc)); + return -ETIMEDOUT; + } + + pr_info("%s: Tuning failed, falling back to fixed sampling clock\n", + mmc_hostname(host->mmc)); + sdhci_reset_tuning(host); + + return -EAGAIN; +} + +static int gl9750_execute_tuning(struct sdhci_host *host, u32 opcode) +{ + host->mmc->retune_period = 0; + if (host->tuning_mode == SDHCI_TUNING_MODE_1) + host->mmc->retune_period = host->tuning_count; + + gli_set_9750(host); + host->tuning_err = __sdhci_execute_tuning_9750(host, opcode); + sdhci_end_tuning(host); + + return 0; +} + +static void gl9750_disable_ssc_pll(struct sdhci_host *host) +{ + u32 pll; + + gl9750_wt_on(host); + pll = sdhci_readl(host, SDHCI_GLI_9750_PLL); + pll &= ~(SDHCI_GLI_9750_PLL_DIR | SDHCI_GLI_9750_PLLSSC_EN); + sdhci_writel(host, pll, SDHCI_GLI_9750_PLL); + gl9750_wt_off(host); +} + +static void gl9750_set_pll(struct sdhci_host *host, u8 dir, u16 ldiv, u8 pdiv) +{ + u32 pll; + + gl9750_wt_on(host); + pll = sdhci_readl(host, SDHCI_GLI_9750_PLL); + pll &= ~(SDHCI_GLI_9750_PLL_LDIV | + SDHCI_GLI_9750_PLL_PDIV | + SDHCI_GLI_9750_PLL_DIR); + pll |= FIELD_PREP(SDHCI_GLI_9750_PLL_LDIV, ldiv) | + FIELD_PREP(SDHCI_GLI_9750_PLL_PDIV, pdiv) | + FIELD_PREP(SDHCI_GLI_9750_PLL_DIR, dir); + sdhci_writel(host, pll, SDHCI_GLI_9750_PLL); + gl9750_wt_off(host); + + /* wait for pll stable */ + mdelay(1); +} + +static void gl9750_set_ssc(struct sdhci_host *host, u8 enable, u8 step, u16 ppm) +{ + u32 pll; + u32 ssc; + + gl9750_wt_on(host); + pll = sdhci_readl(host, SDHCI_GLI_9750_PLL); + ssc = sdhci_readl(host, SDHCI_GLI_9750_PLLSSC); + pll &= ~(SDHCI_GLI_9750_PLLSSC_STEP | + SDHCI_GLI_9750_PLLSSC_EN); + ssc &= ~SDHCI_GLI_9750_PLLSSC_PPM; + pll |= FIELD_PREP(SDHCI_GLI_9750_PLLSSC_STEP, step) | + FIELD_PREP(SDHCI_GLI_9750_PLLSSC_EN, enable); + ssc |= FIELD_PREP(SDHCI_GLI_9750_PLLSSC_PPM, ppm); + sdhci_writel(host, ssc, SDHCI_GLI_9750_PLLSSC); + sdhci_writel(host, pll, SDHCI_GLI_9750_PLL); + gl9750_wt_off(host); +} + +static void gl9750_set_ssc_pll_205mhz(struct sdhci_host *host) +{ + /* set pll to 205MHz and enable ssc */ + gl9750_set_ssc(host, 0x1, 0x1F, 0xFFE7); + gl9750_set_pll(host, 0x1, 0x246, 0x0); +} + +static void sdhci_gl9750_set_clock(struct sdhci_host *host, unsigned int clock) +{ + struct mmc_ios *ios = &host->mmc->ios; + u16 clk; + + host->mmc->actual_clock = 0; + + gl9750_disable_ssc_pll(host); + sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); + + if (clock == 0) + return; + + clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock); + if (clock == 200000000 && ios->timing == MMC_TIMING_UHS_SDR104) { + host->mmc->actual_clock = 205000000; + gl9750_set_ssc_pll_205mhz(host); + } + + sdhci_enable_clk(host, clk); +} + +static void gli_pcie_enable_msi(struct sdhci_pci_slot *slot) +{ + int ret; + + ret = pci_alloc_irq_vectors(slot->chip->pdev, 1, 1, + PCI_IRQ_MSI | PCI_IRQ_MSIX); + if (ret < 0) { + pr_warn("%s: enable PCI MSI failed, error=%d\n", + mmc_hostname(slot->host->mmc), ret); + return; + } + + slot->host->irq = pci_irq_vector(slot->chip->pdev, 0); +} + +static inline void gl9755_wt_on(struct pci_dev *pdev) +{ + u32 wt_value; + u32 wt_enable; + + pci_read_config_dword(pdev, PCI_GLI_9755_WT, &wt_value); + wt_enable = FIELD_GET(PCI_GLI_9755_WT_EN, wt_value); + + if (wt_enable == GLI_9755_WT_EN_ON) + return; + + wt_value &= ~PCI_GLI_9755_WT_EN; + wt_value |= FIELD_PREP(PCI_GLI_9755_WT_EN, GLI_9755_WT_EN_ON); + + pci_write_config_dword(pdev, PCI_GLI_9755_WT, wt_value); +} + +static inline void gl9755_wt_off(struct pci_dev *pdev) +{ + u32 wt_value; + u32 wt_enable; + + pci_read_config_dword(pdev, PCI_GLI_9755_WT, &wt_value); + wt_enable = FIELD_GET(PCI_GLI_9755_WT_EN, wt_value); + + if (wt_enable == GLI_9755_WT_EN_OFF) + return; + + wt_value &= ~PCI_GLI_9755_WT_EN; + wt_value |= FIELD_PREP(PCI_GLI_9755_WT_EN, GLI_9755_WT_EN_OFF); + + pci_write_config_dword(pdev, PCI_GLI_9755_WT, wt_value); +} + +static void gl9755_disable_ssc_pll(struct pci_dev *pdev) +{ + u32 pll; + + gl9755_wt_on(pdev); + pci_read_config_dword(pdev, PCI_GLI_9755_PLL, &pll); + pll &= ~(PCI_GLI_9755_PLL_DIR | PCI_GLI_9755_PLLSSC_EN); + pci_write_config_dword(pdev, PCI_GLI_9755_PLL, pll); + gl9755_wt_off(pdev); +} + +static void gl9755_set_pll(struct pci_dev *pdev, u8 dir, u16 ldiv, u8 pdiv) +{ + u32 pll; + + gl9755_wt_on(pdev); + pci_read_config_dword(pdev, PCI_GLI_9755_PLL, &pll); + pll &= ~(PCI_GLI_9755_PLL_LDIV | + PCI_GLI_9755_PLL_PDIV | + PCI_GLI_9755_PLL_DIR); + pll |= FIELD_PREP(PCI_GLI_9755_PLL_LDIV, ldiv) | + FIELD_PREP(PCI_GLI_9755_PLL_PDIV, pdiv) | + FIELD_PREP(PCI_GLI_9755_PLL_DIR, dir); + pci_write_config_dword(pdev, PCI_GLI_9755_PLL, pll); + gl9755_wt_off(pdev); + + /* wait for pll stable */ + mdelay(1); +} + +static void gl9755_set_ssc(struct pci_dev *pdev, u8 enable, u8 step, u16 ppm) +{ + u32 pll; + u32 ssc; + + gl9755_wt_on(pdev); + pci_read_config_dword(pdev, PCI_GLI_9755_PLL, &pll); + pci_read_config_dword(pdev, PCI_GLI_9755_PLLSSC, &ssc); + pll &= ~(PCI_GLI_9755_PLLSSC_STEP | + PCI_GLI_9755_PLLSSC_EN); + ssc &= ~PCI_GLI_9755_PLLSSC_PPM; + pll |= FIELD_PREP(PCI_GLI_9755_PLLSSC_STEP, step) | + FIELD_PREP(PCI_GLI_9755_PLLSSC_EN, enable); + ssc |= FIELD_PREP(PCI_GLI_9755_PLLSSC_PPM, ppm); + pci_write_config_dword(pdev, PCI_GLI_9755_PLLSSC, ssc); + pci_write_config_dword(pdev, PCI_GLI_9755_PLL, pll); + gl9755_wt_off(pdev); +} + +static void gl9755_set_ssc_pll_205mhz(struct pci_dev *pdev) +{ + /* set pll to 205MHz and enable ssc */ + gl9755_set_ssc(pdev, 0x1, 0x1F, 0xFFE7); + gl9755_set_pll(pdev, 0x1, 0x246, 0x0); +} + +static void sdhci_gl9755_set_clock(struct sdhci_host *host, unsigned int clock) +{ + struct sdhci_pci_slot *slot = sdhci_priv(host); + struct mmc_ios *ios = &host->mmc->ios; + struct pci_dev *pdev; + u16 clk; + + pdev = slot->chip->pdev; + host->mmc->actual_clock = 0; + + gl9755_disable_ssc_pll(pdev); + sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); + + if (clock == 0) + return; + + clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock); + if (clock == 200000000 && ios->timing == MMC_TIMING_UHS_SDR104) { + host->mmc->actual_clock = 205000000; + gl9755_set_ssc_pll_205mhz(pdev); + } + + sdhci_enable_clk(host, clk); +} + +static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot) +{ + struct sdhci_host *host = slot->host; + + gli_pcie_enable_msi(slot); + slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO; + sdhci_enable_v4_mode(host); + + return 0; +} + +static int gli_probe_slot_gl9755(struct sdhci_pci_slot *slot) +{ + struct sdhci_host *host = slot->host; + + gli_pcie_enable_msi(slot); + slot->host->mmc->caps2 |= MMC_CAP2_NO_SDIO; + sdhci_enable_v4_mode(host); + + return 0; +} + +static void sdhci_gli_voltage_switch(struct sdhci_host *host) +{ + /* + * According to Section 3.6.1 signal voltage switch procedure in + * SD Host Controller Simplified Spec. 4.20, steps 6~8 are as + * follows: + * (6) Set 1.8V Signal Enable in the Host Control 2 register. + * (7) Wait 5ms. 1.8V voltage regulator shall be stable within this + * period. + * (8) If 1.8V Signal Enable is cleared by Host Controller, go to + * step (12). + * + * Wait 5ms after set 1.8V signal enable in Host Control 2 register + * to ensure 1.8V signal enable bit is set by GL9750/GL9755. + * + * ...however, the controller in the NUC10i3FNK4 (a 9755) requires + * slightly longer than 5ms before the control register reports that + * 1.8V is ready, and far longer still before the card will actually + * work reliably. + */ + usleep_range(100000, 110000); +} + +static void sdhci_gl9750_reset(struct sdhci_host *host, u8 mask) +{ + sdhci_reset(host, mask); + gli_set_9750(host); +} + +static u32 sdhci_gl9750_readl(struct sdhci_host *host, int reg) +{ + u32 value; + + value = readl(host->ioaddr + reg); + if (unlikely(reg == SDHCI_MAX_CURRENT && !(value & 0xff))) + value |= 0xc8; + + return value; +} + +#ifdef CONFIG_PM_SLEEP +static int sdhci_pci_gli_resume(struct sdhci_pci_chip *chip) +{ + struct sdhci_pci_slot *slot = chip->slots[0]; + + pci_free_irq_vectors(slot->chip->pdev); + gli_pcie_enable_msi(slot); + + return sdhci_pci_resume_host(chip); +} + +static int sdhci_cqhci_gli_resume(struct sdhci_pci_chip *chip) +{ + struct sdhci_pci_slot *slot = chip->slots[0]; + int ret; + + ret = sdhci_pci_gli_resume(chip); + if (ret) + return ret; + + return cqhci_resume(slot->host->mmc); +} + +static int sdhci_cqhci_gli_suspend(struct sdhci_pci_chip *chip) +{ + struct sdhci_pci_slot *slot = chip->slots[0]; + int ret; + + ret = cqhci_suspend(slot->host->mmc); + if (ret) + return ret; + + return sdhci_suspend_host(slot->host); +} +#endif + +static void gl9763e_hs400_enhanced_strobe(struct mmc_host *mmc, + struct mmc_ios *ios) +{ + struct sdhci_host *host = mmc_priv(mmc); + u32 val; + + val = sdhci_readl(host, SDHCI_GLI_9763E_HS400_ES_REG); + if (ios->enhanced_strobe) + val |= SDHCI_GLI_9763E_HS400_ES_BIT; + else + val &= ~SDHCI_GLI_9763E_HS400_ES_BIT; + + sdhci_writel(host, val, SDHCI_GLI_9763E_HS400_ES_REG); +} + +static void sdhci_set_gl9763e_signaling(struct sdhci_host *host, + unsigned int timing) +{ + u16 ctrl_2; + + ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); + ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; + if (timing == MMC_TIMING_MMC_HS200) + ctrl_2 |= SDHCI_CTRL_UHS_SDR104; + else if (timing == MMC_TIMING_MMC_HS) + ctrl_2 |= SDHCI_CTRL_UHS_SDR25; + else if (timing == MMC_TIMING_MMC_DDR52) + ctrl_2 |= SDHCI_CTRL_UHS_DDR50; + else if (timing == MMC_TIMING_MMC_HS400) + ctrl_2 |= SDHCI_GLI_9763E_CTRL_HS400; + + sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); +} + +static void sdhci_gl9763e_dumpregs(struct mmc_host *mmc) +{ + sdhci_dumpregs(mmc_priv(mmc)); +} + +static void sdhci_gl9763e_cqe_pre_enable(struct mmc_host *mmc) +{ + struct cqhci_host *cq_host = mmc->cqe_private; + u32 value; + + value = cqhci_readl(cq_host, CQHCI_CFG); + value |= CQHCI_ENABLE; + cqhci_writel(cq_host, value, CQHCI_CFG); +} + +static void sdhci_gl9763e_cqe_enable(struct mmc_host *mmc) +{ + struct sdhci_host *host = mmc_priv(mmc); + + sdhci_writew(host, GLI_9763E_CQE_TRNS_MODE, SDHCI_TRANSFER_MODE); + sdhci_cqe_enable(mmc); +} + +static u32 sdhci_gl9763e_cqhci_irq(struct sdhci_host *host, u32 intmask) +{ + int cmd_error = 0; + int data_error = 0; + + if (!sdhci_cqe_irq(host, intmask, &cmd_error, &data_error)) + return intmask; + + cqhci_irq(host->mmc, intmask, cmd_error, data_error); + + return 0; +} + +static void sdhci_gl9763e_cqe_post_disable(struct mmc_host *mmc) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct cqhci_host *cq_host = mmc->cqe_private; + u32 value; + + value = cqhci_readl(cq_host, CQHCI_CFG); + value &= ~CQHCI_ENABLE; + cqhci_writel(cq_host, value, CQHCI_CFG); + sdhci_writew(host, 0x0, SDHCI_TRANSFER_MODE); +} + +static const struct cqhci_host_ops sdhci_gl9763e_cqhci_ops = { + .enable = sdhci_gl9763e_cqe_enable, + .disable = sdhci_cqe_disable, + .dumpregs = sdhci_gl9763e_dumpregs, + .pre_enable = sdhci_gl9763e_cqe_pre_enable, + .post_disable = sdhci_gl9763e_cqe_post_disable, +}; + +static int gl9763e_add_host(struct sdhci_pci_slot *slot) +{ + struct device *dev = &slot->chip->pdev->dev; + struct sdhci_host *host = slot->host; + struct cqhci_host *cq_host; + bool dma64; + int ret; + + ret = sdhci_setup_host(host); + if (ret) + return ret; + + cq_host = devm_kzalloc(dev, sizeof(*cq_host), GFP_KERNEL); + if (!cq_host) { + ret = -ENOMEM; + goto cleanup; + } + + cq_host->mmio = host->ioaddr + SDHCI_GLI_9763E_CQE_BASE_ADDR; + cq_host->ops = &sdhci_gl9763e_cqhci_ops; + + dma64 = host->flags & SDHCI_USE_64_BIT_DMA; + if (dma64) + cq_host->caps |= CQHCI_TASK_DESC_SZ_128; + + ret = cqhci_init(cq_host, host->mmc, dma64); + if (ret) + goto cleanup; + + ret = __sdhci_add_host(host); + if (ret) + goto cleanup; + + return 0; + +cleanup: + sdhci_cleanup_host(host); + return ret; +} + +static void sdhci_gl9763e_reset(struct sdhci_host *host, u8 mask) +{ + if ((host->mmc->caps2 & MMC_CAP2_CQE) && (mask & SDHCI_RESET_ALL) && + host->mmc->cqe_private) + cqhci_deactivate(host->mmc); + sdhci_reset(host, mask); +} + +static void gli_set_gl9763e(struct sdhci_pci_slot *slot) +{ + struct pci_dev *pdev = slot->chip->pdev; + u32 value; + + pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value); + value &= ~GLI_9763E_VHS_REV; + value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_W); + pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value); + + pci_read_config_dword(pdev, PCIE_GLI_9763E_SCR, &value); + value |= GLI_9763E_SCR_AXI_REQ; + pci_write_config_dword(pdev, PCIE_GLI_9763E_SCR, value); + + pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value); + value &= ~GLI_9763E_VHS_REV; + value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R); + pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value); +} + +static int gli_probe_slot_gl9763e(struct sdhci_pci_slot *slot) +{ + struct pci_dev *pdev = slot->chip->pdev; + struct sdhci_host *host = slot->host; + u32 value; + + host->mmc->caps |= MMC_CAP_8_BIT_DATA | + MMC_CAP_1_8V_DDR | + MMC_CAP_NONREMOVABLE; + host->mmc->caps2 |= MMC_CAP2_HS200_1_8V_SDR | + MMC_CAP2_HS400_1_8V | + MMC_CAP2_HS400_ES | + MMC_CAP2_NO_SDIO | + MMC_CAP2_NO_SD; + + pci_read_config_dword(pdev, PCIE_GLI_9763E_MB, &value); + if (!(value & GLI_9763E_MB_CMDQ_OFF)) + host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD; + + gli_pcie_enable_msi(slot); + host->mmc_host_ops.hs400_enhanced_strobe = + gl9763e_hs400_enhanced_strobe; + gli_set_gl9763e(slot); + sdhci_enable_v4_mode(host); + + return 0; +} + +static const struct sdhci_ops sdhci_gl9755_ops = { + .set_clock = sdhci_gl9755_set_clock, + .enable_dma = sdhci_pci_enable_dma, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, + .voltage_switch = sdhci_gli_voltage_switch, +}; + +const struct sdhci_pci_fixes sdhci_gl9755 = { + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, + .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50, + .probe_slot = gli_probe_slot_gl9755, + .ops = &sdhci_gl9755_ops, +#ifdef CONFIG_PM_SLEEP + .resume = sdhci_pci_gli_resume, +#endif +}; + +static const struct sdhci_ops sdhci_gl9750_ops = { + .read_l = sdhci_gl9750_readl, + .set_clock = sdhci_gl9750_set_clock, + .enable_dma = sdhci_pci_enable_dma, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_gl9750_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, + .voltage_switch = sdhci_gli_voltage_switch, + .platform_execute_tuning = gl9750_execute_tuning, +}; + +const struct sdhci_pci_fixes sdhci_gl9750 = { + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, + .quirks2 = SDHCI_QUIRK2_BROKEN_DDR50, + .probe_slot = gli_probe_slot_gl9750, + .ops = &sdhci_gl9750_ops, +#ifdef CONFIG_PM_SLEEP + .resume = sdhci_pci_gli_resume, +#endif +}; + +static const struct sdhci_ops sdhci_gl9763e_ops = { + .set_clock = sdhci_set_clock, + .enable_dma = sdhci_pci_enable_dma, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_gl9763e_reset, + .set_uhs_signaling = sdhci_set_gl9763e_signaling, + .voltage_switch = sdhci_gli_voltage_switch, + .irq = sdhci_gl9763e_cqhci_irq, +}; + +const struct sdhci_pci_fixes sdhci_gl9763e = { + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, + .probe_slot = gli_probe_slot_gl9763e, + .ops = &sdhci_gl9763e_ops, +#ifdef CONFIG_PM_SLEEP + .resume = sdhci_cqhci_gli_resume, + .suspend = sdhci_cqhci_gli_suspend, +#endif + .add_host = gl9763e_add_host, +}; |